docs patch 2

Reviewed-on: #48

README.md

@@ -14,6 +14,8 @@ This workspace contains the following released crates:
   crate containing basic low-level register definition.
 - The [`va108xx-hal`](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/va108xx-hal)
   HAL crate containing higher-level abstractions on top of the PAC register crate.
+- The [`va108xx-embassy`](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/va108xx-embassy)
+  crate containing support for running the embassy-rs RTOS.
 - The [`vorago-reb1`](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1)
   BSP crate containing support for the REB1 development board.
 

bootloader/Cargo.toml

@@ -15,10 +15,12 @@ num_enum = { version = "0.7", default-features = false }
 static_assertions = "1"
 
 [dependencies.va108xx-hal]
-path = "../va108xx-hal"
+version = "0.9"
+# path = "../va108xx-hal"
 
 [dependencies.vorago-reb1]
-path = "../vorago-reb1"
+version = "0.7"
+# path = "../vorago-reb1"
 
 [features]
 default = []

examples/embassy/Cargo.toml

@@ -9,7 +9,10 @@ cortex-m = { version = "0.7", features = ["critical-section-single-core"] }
 cortex-m-rt = "0.7"
 embedded-hal = "1"
 embedded-hal-async = "1"
+embedded-io = "0.6"
 embedded-io-async = "0.6"
+heapless = "0.8"
+static_cell = "2"
 
 rtt-target = "0.6"
 panic-rtt-target = "0.2"
@@ -24,8 +27,8 @@ embassy-executor = { version = "0.7", features = [
   "executor-interrupt"
 ]}
 
-va108xx-hal = { path = "../../va108xx-hal" }
+va108xx-hal = "0.9"
-va108xx-embassy = { path = "../../va108xx-embassy", default-features = false }
+va108xx-embassy = "0.1"
 
 [features]
 default = ["ticks-hz-1_000", "va108xx-embassy/irq-oc30-oc31"]

examples/embassy/src/bin/async-uart-rx.rs

@@ -0,0 +1,171 @@
+//! Asynchronous UART reception example application.
+//!
+//! This application receives data on two UARTs permanently using a ring buffer.
+//! The ring buffer are read them asynchronously. UART A is received on ports PA8 and PA9.
+//! UART B is received on ports PA2 and PA3.
+//!
+//! Instructions:
+//!
+//! 1. Tie a USB to UART converter with RX to PA9 and TX to PA8 for UART A.
+//!    Tie a USB to UART converter with RX to PA3 and TX to PA2 for UART B.
+//! 2. Connect to the serial interface by using an application like Putty or picocom. You can
+//!    type something in the terminal and check if the data is echoed back. You can also check the
+//!    RTT logs to see received data.
+#![no_std]
+#![no_main]
+use core::cell::RefCell;
+
+use critical_section::Mutex;
+use embassy_executor::Spawner;
+use embassy_time::Instant;
+use embedded_hal::digital::StatefulOutputPin;
+use embedded_io::Write;
+use embedded_io_async::Read;
+use heapless::spsc::{Consumer, Producer, Queue};
+use panic_rtt_target as _;
+use rtt_target::{rprintln, rtt_init_print};
+use va108xx_embassy::embassy;
+use va108xx_hal::{
+    gpio::PinsA,
+    pac::{self, interrupt},
+    prelude::*,
+    uart::{
+        self, on_interrupt_uart_b_overwriting,
+        rx_asynch::{on_interrupt_uart_a, RxAsync},
+        RxAsyncSharedConsumer, Tx,
+    },
+    InterruptConfig,
+};
+
+const SYSCLK_FREQ: Hertz = Hertz::from_raw(50_000_000);
+
+static QUEUE_UART_A: static_cell::ConstStaticCell<Queue<u8, 256>> =
+    static_cell::ConstStaticCell::new(Queue::new());
+static PRODUCER_UART_A: Mutex<RefCell<Option<Producer<u8, 256>>>> = Mutex::new(RefCell::new(None));
+
+static QUEUE_UART_B: static_cell::ConstStaticCell<Queue<u8, 256>> =
+    static_cell::ConstStaticCell::new(Queue::new());
+static PRODUCER_UART_B: Mutex<RefCell<Option<Producer<u8, 256>>>> = Mutex::new(RefCell::new(None));
+static CONSUMER_UART_B: Mutex<RefCell<Option<Consumer<u8, 256>>>> = Mutex::new(RefCell::new(None));
+
+// main is itself an async function.
+#[embassy_executor::main]
+async fn main(spawner: Spawner) {
+    rtt_init_print!();
+    rprintln!("-- VA108xx Async UART RX Demo --");
+
+    let mut dp = pac::Peripherals::take().unwrap();
+
+    // Safety: Only called once here.
+    unsafe {
+        embassy::init(
+            &mut dp.sysconfig,
+            &dp.irqsel,
+            SYSCLK_FREQ,
+            dp.tim23,
+            dp.tim22,
+        );
+    }
+
+    let porta = PinsA::new(&mut dp.sysconfig, dp.porta);
+    let mut led0 = porta.pa10.into_readable_push_pull_output();
+    let mut led1 = porta.pa7.into_readable_push_pull_output();
+    let mut led2 = porta.pa6.into_readable_push_pull_output();
+
+    let tx_uart_a = porta.pa9.into_funsel_2();
+    let rx_uart_a = porta.pa8.into_funsel_2();
+
+    let uarta = uart::Uart::new_with_interrupt(
+        &mut dp.sysconfig,
+        50.MHz(),
+        dp.uarta,
+        (tx_uart_a, rx_uart_a),
+        115200.Hz(),
+        InterruptConfig::new(pac::Interrupt::OC2, true, true),
+    );
+
+    let tx_uart_b = porta.pa3.into_funsel_2();
+    let rx_uart_b = porta.pa2.into_funsel_2();
+
+    let uartb = uart::Uart::new_with_interrupt(
+        &mut dp.sysconfig,
+        50.MHz(),
+        dp.uartb,
+        (tx_uart_b, rx_uart_b),
+        115200.Hz(),
+        InterruptConfig::new(pac::Interrupt::OC3, true, true),
+    );
+    let (mut tx_uart_a, rx_uart_a) = uarta.split();
+    let (tx_uart_b, rx_uart_b) = uartb.split();
+    let (prod_uart_a, cons_uart_a) = QUEUE_UART_A.take().split();
+    // Pass the producer to the interrupt handler.
+    let (prod_uart_b, cons_uart_b) = QUEUE_UART_B.take().split();
+    critical_section::with(|cs| {
+        *PRODUCER_UART_A.borrow(cs).borrow_mut() = Some(prod_uart_a);
+        *PRODUCER_UART_B.borrow(cs).borrow_mut() = Some(prod_uart_b);
+        *CONSUMER_UART_B.borrow(cs).borrow_mut() = Some(cons_uart_b);
+    });
+    let mut async_rx_uart_a = RxAsync::new(rx_uart_a, cons_uart_a);
+    let async_rx_uart_b = RxAsyncSharedConsumer::new(rx_uart_b, &CONSUMER_UART_B);
+    spawner
+        .spawn(uart_b_task(async_rx_uart_b, tx_uart_b))
+        .unwrap();
+    let mut buf = [0u8; 256];
+    loop {
+        rprintln!("Current time UART A: {}", Instant::now().as_secs());
+        led0.toggle().ok();
+        led1.toggle().ok();
+        led2.toggle().ok();
+        let read_bytes = async_rx_uart_a.read(&mut buf).await.unwrap();
+        let read_str = core::str::from_utf8(&buf[..read_bytes]).unwrap();
+        rprintln!(
+            "Read {} bytes asynchronously on UART A: {:?}",
+            read_bytes,
+            read_str
+        );
+        tx_uart_a.write_all(read_str.as_bytes()).unwrap();
+    }
+}
+
+#[embassy_executor::task]
+async fn uart_b_task(mut async_rx: RxAsyncSharedConsumer<pac::Uartb, 256>, mut tx: Tx<pac::Uartb>) {
+    let mut buf = [0u8; 256];
+    loop {
+        rprintln!("Current time UART B: {}", Instant::now().as_secs());
+        // Infallible asynchronous operation.
+        let read_bytes = async_rx.read(&mut buf).await.unwrap();
+        let read_str = core::str::from_utf8(&buf[..read_bytes]).unwrap();
+        rprintln!(
+            "Read {} bytes asynchronously on UART B: {:?}",
+            read_bytes,
+            read_str
+        );
+        tx.write_all(read_str.as_bytes()).unwrap();
+    }
+}
+
+#[interrupt]
+#[allow(non_snake_case)]
+fn OC2() {
+    let mut prod =
+        critical_section::with(|cs| PRODUCER_UART_A.borrow(cs).borrow_mut().take().unwrap());
+    let errors = on_interrupt_uart_a(&mut prod);
+    critical_section::with(|cs| *PRODUCER_UART_A.borrow(cs).borrow_mut() = Some(prod));
+    // In a production app, we could use a channel to send the errors to the main task.
+    if let Err(errors) = errors {
+        rprintln!("UART A errors: {:?}", errors);
+    }
+}
+
+#[interrupt]
+#[allow(non_snake_case)]
+fn OC3() {
+    let mut prod =
+        critical_section::with(|cs| PRODUCER_UART_B.borrow(cs).borrow_mut().take().unwrap());
+    let errors = on_interrupt_uart_b_overwriting(&mut prod, &CONSUMER_UART_B);
+    critical_section::with(|cs| *PRODUCER_UART_B.borrow(cs).borrow_mut() = Some(prod));
+    // In a production app, we could use a channel to send the errors to the main task.
+    if let Err(errors) = errors {
+        rprintln!("UART B errors: {:?}", errors);
+    }
+}

examples/embassy/src/bin/async-uart-tx.rs

@@ -1,3 +1,13 @@
+//! Asynchronous UART transmission example application.
+//!
+//! This application receives sends 4 strings with different sizes permanently using UART A.
+//! Ports PA8 and PA9 are used for this.
+//!
+//! Instructions:
+//!
+//! 1. Tie a USB to UART converter with RX to PA9 and TX to PA8 for UART A.
+//! 2. Connect to the serial interface by using an application like Putty or picocom. You can
+//!    can verify the correctness of the sent strings.
 #![no_std]
 #![no_main]
 use embassy_executor::Spawner;
@@ -28,7 +38,7 @@ const STR_LIST: &[&str] = &[
 #[embassy_executor::main]
 async fn main(_spawner: Spawner) {
     rtt_init_print!();
-    rprintln!("-- VA108xx Embassy Demo --");
+    rprintln!("-- VA108xx Async UART TX Demo --");
 
     let mut dp = pac::Peripherals::take().unwrap();
 

examples/rtic/Cargo.toml

@@ -22,5 +22,5 @@ rtic-sync = { version = "1.3", features = ["defmt-03"] }
 once_cell = {version = "1", default-features = false, features = ["critical-section"]}
 ringbuf = { version = "0.4.7", default-features = false, features = ["portable-atomic"] }
 
-va108xx-hal = { version = "0.8", path = "../../va108xx-hal" }
+va108xx-hal = "0.9"
-vorago-reb1 = { path = "../../vorago-reb1" }
+vorago-reb1 = "0.7"

examples/simple/Cargo.toml

@@ -16,9 +16,8 @@ embedded-io = "0.6"
 cortex-m-semihosting = "0.5.0"
 
 [dependencies.va108xx-hal]
-path = "../../va108xx-hal"
+version = "0.9"
-version = "0.8"
 features = ["rt", "defmt"]
 
 [dependencies.vorago-reb1]
-path = "../../vorago-reb1"
+version = "0.7"

examples/simple/examples/uart.rs

@@ -27,15 +27,15 @@ fn main() -> ! {
     let gpioa = PinsA::new(&mut dp.sysconfig, dp.porta);
     let tx = gpioa.pa9.into_funsel_2();
     let rx = gpioa.pa8.into_funsel_2();
-
+    let uart = uart::Uart::new_without_interrupt(
-    let uarta = uart::Uart::new_without_interrupt(
         &mut dp.sysconfig,
         50.MHz(),
         dp.uarta,
         (tx, rx),
         115200.Hz(),
     );
-    let (mut tx, mut rx) = uarta.split();
+
+    let (mut tx, mut rx) = uart.split();
     writeln!(tx, "Hello World\r").unwrap();
     loop {
         // Echo what is received on the serial link.

flashloader/Cargo.toml

@@ -29,7 +29,9 @@ rtic-monotonics = { version = "2", features = ["cortex-m-systick"] }
 rtic-sync = {version = "1", features = ["defmt-03"]}
 
 [dependencies.va108xx-hal]
-path = "../va108xx-hal"
+version = "0.9"
+# path = "../va108xx-hal"
 
 [dependencies.vorago-reb1]
-path = "../vorago-reb1"
+version = "0.7"
+# path = "../vorago-reb1"

va108xx-embassy/CHANGELOG.md

@@ -0,0 +1,17 @@
+Change Log
+=======
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](http://keepachangelog.com/)
+and this project adheres to [Semantic Versioning](http://semver.org/).
+
+## [unreleased]
+
+## [v0.1.2] and [v0.1.1] 2025-02-13
+
+Docs patch
+
+## [v0.1.0] 2025-02-13
+
+Initial release

va108xx-embassy/Cargo.toml

@@ -1,11 +1,17 @@
 [package]
 name = "va108xx-embassy"
-version = "0.1.0"
+version = "0.1.2"
 edition = "2021"
+authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
+description = "Embassy-rs support for the Vorago VA108xx family of microcontrollers"
+homepage = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
+repository = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
+license = "Apache-2.0"
+keywords = ["no-std", "hal", "cortex-m", "vorago", "va108xx"]
+categories = ["aerospace", "embedded", "no-std", "hardware-support"]
 
 [dependencies]
 critical-section = "1"
-portable-atomic = { version = "1", features = ["unsafe-assume-single-core"]}
 
 embassy-sync = "0.6"
 embassy-executor = "0.7"
@@ -14,8 +20,12 @@ embassy-time-queue-utils = "0.1"
 
 once_cell = { version = "1", default-features = false, features = ["critical-section"] }
 
-[dependencies.va108xx-hal]
+va108xx-hal = "0.9"
-path = "../va108xx-hal"
+
+[target.'cfg(all(target_arch = "arm", target_os = "none"))'.dependencies]
+portable-atomic = { version = "1", features = ["unsafe-assume-single-core"] }
+[target.'cfg(not(all(target_arch = "arm", target_os = "none")))'.dependencies]
+portable-atomic = "1"
 
 [features]
 default = ["irq-oc30-oc31"]
@@ -25,3 +35,6 @@ irqs-in-lib = []
 irq-oc28-oc29 = ["irqs-in-lib"]
 irq-oc29-oc30 = ["irqs-in-lib"]
 irq-oc30-oc31 = ["irqs-in-lib"]
+
+[package.metadata.docs.rs]
+rustdoc-args = ["--generate-link-to-definition"]

va108xx-embassy/docs.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+export RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options"
+cargo +nightly doc --open

va108xx-embassy/src/lib.rs

@@ -23,14 +23,15 @@
 //!
 //! You can disable the default features and then specify one of the features above to use the
 //! documented combination of IRQs. It is also possible to specify custom IRQs by importing and
-//! using the [embassy::embassy_time_driver_irqs] macro to declare the IRQ handlers in the
+//! using the [embassy_time_driver_irqs] macro to declare the IRQ handlers in the
 //! application code. If this is done, [embassy::init_with_custom_irqs] must be used
 //! method to pass the IRQ numbers to the library.
 //!
 //! ## Examples
 //!
-//! [embassy example project](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/embassy)
+//! [embassy example projects](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/embassy)
 #![no_std]
+#![cfg_attr(docsrs, feature(doc_auto_cfg))]
 use core::cell::{Cell, RefCell};
 use critical_section::CriticalSection;
 use embassy_sync::blocking_mutex::CriticalSectionMutex as Mutex;
@@ -62,7 +63,7 @@ time_driver_impl!(
 /// the feature flags specified. However, the macro is exported to allow users to specify the
 /// interrupt handlers themselves.
 ///
-/// Please note that you have to explicitely import the [va108xx_hal::pac::interrupt]
+/// Please note that you have to explicitely import the [macro@va108xx_hal::pac::interrupt]
 /// macro in the application code in case this macro is used there.
 #[macro_export]
 macro_rules! embassy_time_driver_irqs {
@@ -299,7 +300,7 @@ impl TimerDriver {
                         .cnt_value()
                         .write(|w| unsafe { w.bits(remaining_ticks.unwrap() as u32) });
                     alarm_tim.ctrl().modify(|_, w| w.irq_enb().set_bit());
-                    alarm_tim.enable().write(|w| unsafe { w.bits(1) })
+                    alarm_tim.enable().write(|w| unsafe { w.bits(1) });
                 }
             }
         })

va108xx-hal/CHANGELOG.md

@@ -10,6 +10,10 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [v0.9.0]
 
+## Fixed
+
+- Important bugfix for UART driver which causes UART B drivers not to work.
+
 ## Removed
 
 - Deleted some HAL re-exports in the PWM module
@@ -38,6 +42,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - `enable_interrupt` and `disable_interrupt` renamed to `enable_nvic_interrupt` and
   `disable_nvic_interrupt` to distinguish them from peripheral interrupts more clearly.
 - `port_mux` renamed to `port_function_select`
+- Renamed `IrqUartErrors` to `UartErrors`.
 
 ## Added
 
@@ -45,6 +50,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
   methods.
 - Asynchronous GPIO support.
 - Asynchronous UART TX support.
+- Asynchronous UART RX support.
 - Add new `get_tim_raw` unsafe method to retrieve TIM peripheral blocks.
 - `Uart::with_with_interrupt` and `Uart::new_without_interrupt`
 

va108xx-hal/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "va108xx-hal"
-version = "0.8.0"
+version = "0.9.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "HAL for the Vorago VA108xx family of microcontrollers"
@@ -24,10 +24,12 @@ fugit = "0.3"
 typenum = "1"
 critical-section = "1"
 delegate = ">=0.12, <=0.13"
+heapless = "0.8"
+static_cell = "2"
 thiserror = { version = "2", default-features = false }
 void = { version = "1", default-features = false }
 once_cell = {version = "1", default-features = false }
-va108xx = { version = "0.3", default-features = false, features = ["critical-section"] }
+va108xx = { version = "0.4", default-features = false, features = ["critical-section"] }
 embassy-sync = "0.6"
 
 defmt = { version = "0.3", optional = true }

va108xx-hal/README.md

@@ -25,12 +25,6 @@ rustup target add thumbv6m-none-eabi
 
 After that, you can use `cargo build` to build the development version of the crate.
 
-If you have not done this yet, it is recommended to read some of the excellent resources
-available to learn Rust:
-
-- [Rust Embedded Book](https://docs.rust-embedded.org/book/)
-- [Rust Discovery Book](https://docs.rust-embedded.org/discovery/)
-
 ## Setting up your own binary crate
 
 If you have a custom board, you might be interested in setting up a new binary crate for your
@@ -65,3 +59,11 @@ is contained within the
 
 7. Flashing the board might work differently for different boards and there is usually
    more than one way. You can find example instructions in primary README.
+
+## Embedded Rust
+
+If you have not done this yet, it is recommended to read some of the excellent resources available
+to learn Rust:
+
+- [Rust Embedded Book](https://docs.rust-embedded.org/book/)
+- [Rust Discovery Book](https://docs.rust-embedded.org/discovery/)

va108xx-hal/src/clock.rs

@@ -11,6 +11,7 @@ static SYS_CLOCK: Mutex<OnceCell<Hertz>> = Mutex::new(OnceCell::new());
 pub type PeripheralClocks = PeripheralSelect;
 
 #[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum FilterClkSel {
     SysClk = 0,
     Clk1 = 1,
@@ -39,13 +40,27 @@ pub fn get_sys_clock() -> Option<Hertz> {
 pub fn set_clk_div_register(syscfg: &mut va108xx::Sysconfig, clk_sel: FilterClkSel, div: u32) {
     match clk_sel {
         FilterClkSel::SysClk => (),
-        FilterClkSel::Clk1 => syscfg.ioconfig_clkdiv1().write(|w| unsafe { w.bits(div) }),
+        FilterClkSel::Clk1 => {
-        FilterClkSel::Clk2 => syscfg.ioconfig_clkdiv2().write(|w| unsafe { w.bits(div) }),
+            syscfg.ioconfig_clkdiv1().write(|w| unsafe { w.bits(div) });
-        FilterClkSel::Clk3 => syscfg.ioconfig_clkdiv3().write(|w| unsafe { w.bits(div) }),
+        }
-        FilterClkSel::Clk4 => syscfg.ioconfig_clkdiv4().write(|w| unsafe { w.bits(div) }),
+        FilterClkSel::Clk2 => {
-        FilterClkSel::Clk5 => syscfg.ioconfig_clkdiv5().write(|w| unsafe { w.bits(div) }),
+            syscfg.ioconfig_clkdiv2().write(|w| unsafe { w.bits(div) });
-        FilterClkSel::Clk6 => syscfg.ioconfig_clkdiv6().write(|w| unsafe { w.bits(div) }),
+        }
-        FilterClkSel::Clk7 => syscfg.ioconfig_clkdiv7().write(|w| unsafe { w.bits(div) }),
+        FilterClkSel::Clk3 => {
+            syscfg.ioconfig_clkdiv3().write(|w| unsafe { w.bits(div) });
+        }
+        FilterClkSel::Clk4 => {
+            syscfg.ioconfig_clkdiv4().write(|w| unsafe { w.bits(div) });
+        }
+        FilterClkSel::Clk5 => {
+            syscfg.ioconfig_clkdiv5().write(|w| unsafe { w.bits(div) });
+        }
+        FilterClkSel::Clk6 => {
+            syscfg.ioconfig_clkdiv6().write(|w| unsafe { w.bits(div) });
+        }
+        FilterClkSel::Clk7 => {
+            syscfg.ioconfig_clkdiv7().write(|w| unsafe { w.bits(div) });
+        }
     }
 }
 

va108xx-hal/src/gpio/asynch.rs

@@ -4,7 +4,7 @@
 //! the [embedded_hal_async::digital::Wait] trait. These types allow for asynchronous waiting
 //! on GPIO pins. Please note that this module does not specify/declare the interrupt handlers
 //! which must be provided for async support to work. However, it provides one generic
-//! [handler][handle_interrupt_for_async_gpio] which should be called in ALL user interrupt handlers
+//! [handler][on_interrupt_for_asynch_gpio] which should be called in ALL user interrupt handlers
 //! which handle GPIO interrupts.
 //!
 //! # Example
@@ -90,7 +90,7 @@ pub struct InputPinFuture {
 impl InputPinFuture {
     /// # Safety
     ///
-    /// This calls [Self::new] but uses [pac::Peripherals::steal] to get the system configuration
+    /// This calls [Self::new_with_dyn_pin] but uses [pac::Peripherals::steal] to get the system configuration
     /// and IRQ selection peripherals. Users must ensure that the registers and configuration
     /// related to this input pin are not being used elsewhere concurrently.
     pub unsafe fn new_unchecked_with_dyn_pin(
@@ -127,7 +127,7 @@ impl InputPinFuture {
 
     /// # Safety
     ///
-    /// This calls [Self::new] but uses [pac::Peripherals::steal] to get the system configuration
+    /// This calls [Self::new_with_pin] but uses [pac::Peripherals::steal] to get the system configuration
     /// and IRQ selection peripherals. Users must ensure that the registers and configuration
     /// related to this input pin are not being used elsewhere concurrently.
     pub unsafe fn new_unchecked_with_pin<I: PinId, C: InputConfig>(
@@ -200,7 +200,7 @@ impl InputDynPinAsync {
     /// passed as well and is used to route and enable the interrupt.
     ///
     /// Please note that the interrupt handler itself must be provided by the user and the
-    /// generic [handle_interrupt_for_async_gpio] function must be called inside that function for
+    /// generic [on_interrupt_for_asynch_gpio] function must be called inside that function for
     /// the asynchronous functionality to work.
     pub fn new(pin: DynPin, irq: pac::Interrupt) -> Result<Self, InvalidPinTypeError> {
         if !pin.is_input_pin() {
@@ -335,7 +335,7 @@ impl<I: PinId, C: InputConfig> InputPinAsync<I, C> {
     /// passed as well and is used to route and enable the interrupt.
     ///
     /// Please note that the interrupt handler itself must be provided by the user and the
-    /// generic [handle_interrupt_for_async_gpio] function must be called inside that function for
+    /// generic [on_interrupt_for_asynch_gpio] function must be called inside that function for
     /// the asynchronous functionality to work.
     pub fn new(pin: Pin<I, pin::Input<C>>, irq: pac::Interrupt) -> Self {
         Self { pin, irq }

va108xx-hal/src/gpio/dynpin.rs

@@ -69,6 +69,7 @@ use crate::{clock::FilterClkSel, enable_nvic_interrupt, pac, FunSel, InterruptCo
 
 /// Value-level `enum` for disabled configurations
 #[derive(PartialEq, Eq, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum DynDisabled {
     Floating,
     PullDown,
@@ -156,14 +157,16 @@ pub const DYN_ALT_FUNC_3: DynPinMode = DynPinMode::Alternate(DynAlternate::Sel3)
 //==================================================================================================
 
 /// Value-level `enum` for pin groups
-#[derive(PartialEq, Eq, Clone, Copy)]
+#[derive(Debug, PartialEq, Eq, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum DynGroup {
     A,
     B,
 }
 
 /// Value-level `struct` representing pin IDs
-#[derive(PartialEq, Eq, Clone, Copy)]
+#[derive(Debug, PartialEq, Eq, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct DynPinId {
     pub group: DynGroup,
     pub num: u8,
@@ -177,6 +180,7 @@ pub struct DynPinId {
 ///
 /// This `struct` takes ownership of a [`DynPinId`] and provides an API to
 /// access the corresponding regsiters.
+#[derive(Debug)]
 pub(crate) struct DynRegisters(DynPinId);
 
 // [`DynRegisters`] takes ownership of the [`DynPinId`], and [`DynPin`]
@@ -209,6 +213,7 @@ impl DynRegisters {
 ///
 /// This type acts as a type-erased version of [`Pin`]. Every pin is represented
 /// by the same type, and pins are tracked and distinguished at run-time.
+#[derive(Debug)]
 pub struct DynPin {
     pub(crate) regs: DynRegisters,
     mode: DynPinMode,

va108xx-hal/src/gpio/pin.rs

@@ -119,8 +119,11 @@ pub trait InputConfig: Sealed {
     const DYN: DynInput;
 }
 
+#[derive(Debug)]
 pub enum Floating {}
+#[derive(Debug)]
 pub enum PullDown {}
+#[derive(Debug)]
 pub enum PullUp {}
 
 impl InputConfig for Floating {
@@ -148,6 +151,7 @@ pub type InputPullUp = Input<PullUp>;
 ///
 /// Type `C` is one of three input configurations: [`Floating`], [`PullDown`] or
 /// [`PullUp`]
+#[derive(Debug)]
 pub struct Input<C: InputConfig> {
     cfg: PhantomData<C>,
 }
@@ -177,13 +181,17 @@ pub trait OutputConfig: Sealed {
 pub trait ReadableOutput: Sealed {}
 
 /// Type-level variant of [`OutputConfig`] for a push-pull configuration
+#[derive(Debug)]
 pub enum PushPull {}
 /// Type-level variant of [`OutputConfig`] for an open drain configuration
+#[derive(Debug)]
 pub enum OpenDrain {}
 
 /// Type-level variant of [`OutputConfig`] for a readable push-pull configuration
+#[derive(Debug)]
 pub enum ReadablePushPull {}
 /// Type-level variant of [`OutputConfig`] for a readable open-drain configuration
+#[derive(Debug)]
 pub enum ReadableOpenDrain {}
 
 impl Sealed for PushPull {}
@@ -210,6 +218,7 @@ impl OutputConfig for ReadableOpenDrain {
 ///
 /// Type `C` is one of four output configurations: [`PushPull`], [`OpenDrain`] or
 /// their respective readable versions
+#[derive(Debug)]
 pub struct Output<C: OutputConfig> {
     cfg: PhantomData<C>,
 }
@@ -304,6 +313,7 @@ macro_rules! pin_id {
         // Need paste macro to use ident in doc attribute
         paste! {
             #[doc = "Pin ID representing pin " $Id]
+            #[derive(Debug)]
             pub enum $Id {}
             impl Sealed for $Id {}
             impl PinId for $Id {
@@ -321,6 +331,7 @@ macro_rules! pin_id {
 //==================================================================================================
 
 /// A type-level GPIO pin, parameterized by [PinId] and [PinMode] types
+#[derive(Debug)]
 pub struct Pin<I: PinId, M: PinMode> {
     inner: DynPin,
     phantom: PhantomData<(I, M)>,
@@ -741,6 +752,7 @@ macro_rules! pins {
     ) => {
         paste!(
             /// Collection of all the individual [`Pin`]s for a given port (PORTA or PORTB)
+            #[derive(Debug)]
             pub struct $PinsName {
                 port: $Port,
                 $(

va108xx-hal/src/gpio/reg.rs

@@ -304,7 +304,7 @@ pub(super) unsafe trait RegisterInterface {
         unsafe {
             portreg
                 .datamask()
-                .modify(|r, w| w.bits(r.bits() | self.mask_32()))
+                .modify(|r, w| w.bits(r.bits() | self.mask_32()));
         }
     }
 
@@ -316,7 +316,7 @@ pub(super) unsafe trait RegisterInterface {
         unsafe {
             portreg
                 .datamask()
-                .modify(|r, w| w.bits(r.bits() & !self.mask_32()))
+                .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
         }
     }
 

va108xx-hal/src/i2c.rs

@@ -18,6 +18,7 @@ const CLK_400K: Hertz = Hertz::from_raw(400_000);
 const MIN_CLK_400K: Hertz = Hertz::from_raw(8_000_000);
 
 #[derive(Debug, PartialEq, Eq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum FifoEmptyMode {
     Stall = 0,
     EndTransaction = 1,
@@ -89,18 +90,21 @@ enum I2cCmd {
 }
 
 #[derive(Debug, PartialEq, Eq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum I2cSpeed {
     Regular100khz = 0,
     Fast400khz = 1,
 }
 
 #[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum I2cDirection {
     Send = 0,
     Read = 1,
 }
 
 #[derive(Debug, PartialEq, Eq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum I2cAddress {
     Regular(u8),
     TenBit(u16),
@@ -141,9 +145,12 @@ impl Instance for pac::I2cb {
 // Config
 //==================================================================================================
 
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct TrTfThighTlow(u8, u8, u8, u8);
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct TsuStoTsuStaThdStaTBuf(u8, u8, u8, u8);
 
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct TimingCfg {
     // 4 bit max width
     tr: u8,
@@ -218,6 +225,7 @@ impl Default for TimingCfg {
     }
 }
 
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct MasterConfig {
     pub tx_fe_mode: FifoEmptyMode,
     pub rx_fe_mode: FifoEmptyMode,
@@ -384,12 +392,12 @@ impl<I2c: Instance> I2cBase<I2c> {
             let (addr, addr_mode_mask) = Self::unwrap_addr(addr_b);
             self.i2c
                 .s0_addressb()
-                .write(|w| unsafe { w.bits((addr << 1) as u32 | addr_mode_mask) })
+                .write(|w| unsafe { w.bits((addr << 1) as u32 | addr_mode_mask) });
         }
         if let Some(addr_b_mask) = sl_cfg.addr_b_mask {
             self.i2c
                 .s0_addressmaskb()
-                .write(|w| unsafe { w.bits((addr_b_mask << 1) as u32) })
+                .write(|w| unsafe { w.bits((addr_b_mask << 1) as u32) });
         }
     }
 

va108xx-hal/src/lib.rs

@@ -51,8 +51,8 @@ pub enum PeripheralSelect {
 
 /// Generic interrupt config which can be used to specify whether the HAL driver will
 /// use the IRQSEL register to route an interrupt, and whether the IRQ will be unmasked in the
-/// Cortex-M0 NVIC. Both are generally necessary for IRQs to work, but the user might perform
+/// Cortex-M0 NVIC. Both are generally necessary for IRQs to work, but the user might want to
-/// this steps themselves
+/// perform those steps themselves.
 #[derive(Debug, PartialEq, Eq, Clone, Copy)]
 pub struct InterruptConfig {
     /// Interrupt target vector. Should always be set, might be required for disabling IRQs
@@ -77,6 +77,7 @@ impl InterruptConfig {
 pub type IrqCfg = InterruptConfig;
 
 #[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct InvalidPin(pub(crate) ());
 
 /// Can be used to manually manipulate the function select of port pins

va108xx-hal/src/pwm.rs

@@ -15,7 +15,9 @@ use crate::{clock::enable_peripheral_clock, gpio::DynPinId};
 
 const DUTY_MAX: u16 = u16::MAX;
 
-pub struct PwmCommon {
+#[derive(Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub(crate) struct PwmCommon {
     sys_clk: Hertz,
     /// For PWMB, this is the upper limit
     current_duty: u16,

va108xx-hal/src/spi.rs

@@ -37,6 +37,7 @@ pub const BMSTART_BMSTOP_MASK: u32 = 1 << 31;
 pub const DEFAULT_CLK_DIV: u16 = 2;
 
 #[derive(Debug, PartialEq, Eq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum HwChipSelectId {
     Id0 = 0,
     Id1 = 1,
@@ -50,6 +51,7 @@ pub enum HwChipSelectId {
 }
 
 #[derive(Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum SpiPort {
     Porta = 0,
     Portb = 1,
@@ -58,6 +60,7 @@ pub enum SpiPort {
 }
 
 #[derive(Debug, PartialEq, Eq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum WordSize {
     OneBit = 0x00,
     FourBits = 0x03,
@@ -789,7 +792,7 @@ where
     // initialization. Returns the amount of written bytes.
     fn initial_send_fifo_pumping_with_words(&self, words: &[Word]) -> usize {
         if self.blockmode {
-            self.spi.ctrl1().modify(|_, w| w.mtxpause().set_bit())
+            self.spi.ctrl1().modify(|_, w| w.mtxpause().set_bit());
         }
         // Fill the first half of the write FIFO
         let mut current_write_idx = 0;
@@ -803,7 +806,7 @@ where
             current_write_idx += 1;
         }
         if self.blockmode {
-            self.spi.ctrl1().modify(|_, w| w.mtxpause().clear_bit())
+            self.spi.ctrl1().modify(|_, w| w.mtxpause().clear_bit());
         }
         current_write_idx
     }
@@ -812,7 +815,7 @@ where
     // initialization.
     fn initial_send_fifo_pumping_with_fill_words(&self, send_len: usize) -> usize {
         if self.blockmode {
-            self.spi.ctrl1().modify(|_, w| w.mtxpause().set_bit())
+            self.spi.ctrl1().modify(|_, w| w.mtxpause().set_bit());
         }
         // Fill the first half of the write FIFO
         let mut current_write_idx = 0;
@@ -826,7 +829,7 @@ where
             current_write_idx += 1;
         }
         if self.blockmode {
-            self.spi.ctrl1().modify(|_, w| w.mtxpause().clear_bit())
+            self.spi.ctrl1().modify(|_, w| w.mtxpause().clear_bit());
         }
         current_write_idx
     }

va108xx-hal/src/sysconfig.rs

@@ -20,7 +20,7 @@ pub fn enable_rom_scrubbing(
 }
 
 pub fn disable_rom_scrubbing(syscfg: &mut pac::Sysconfig) {
-    syscfg.rom_scrub().write(|w| unsafe { w.bits(0) })
+    syscfg.rom_scrub().write(|w| unsafe { w.bits(0) });
 }
 
 /// Enable scrubbing for the RAM
@@ -39,7 +39,7 @@ pub fn enable_ram_scrubbing(
 }
 
 pub fn disable_ram_scrubbing(syscfg: &mut pac::Sysconfig) {
-    syscfg.ram_scrub().write(|w| unsafe { w.bits(0) })
+    syscfg.ram_scrub().write(|w| unsafe { w.bits(0) });
 }
 
 /// Clear the reset bit. This register is active low, so doing this will hold the peripheral

va108xx-hal/src/timer.rs

@@ -79,6 +79,7 @@ pub enum Event {
 }
 
 #[derive(Default, Debug, PartialEq, Eq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct CascadeCtrl {
     /// Enable Cascade 0 signal active as a requirement for counting
     pub enb_start_src_csd0: bool,
@@ -108,6 +109,7 @@ pub struct CascadeCtrl {
 }
 
 #[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum CascadeSel {
     Csd0 = 0,
     Csd1 = 1,
@@ -319,7 +321,7 @@ pub unsafe trait TimRegInterface {
             va108xx::Peripherals::steal()
                 .sysconfig
                 .tim_reset()
-                .modify(|r, w| w.bits(r.bits() & !self.mask_32()))
+                .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
         }
     }
 
@@ -330,7 +332,7 @@ pub unsafe trait TimRegInterface {
             va108xx::Peripherals::steal()
                 .sysconfig
                 .tim_reset()
-                .modify(|r, w| w.bits(r.bits() | self.mask_32()))
+                .modify(|r, w| w.bits(r.bits() | self.mask_32()));
         }
     }
 }

va108xx-hal/src/uart/mod.rs

@@ -7,7 +7,6 @@
 //! - [Flashloader exposing a CCSDS interface via UART](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/flashloader)
 use core::{convert::Infallible, ops::Deref};
 use fugit::RateExtU32;
-use va108xx::Uarta;
 
 pub use crate::InterruptConfig;
 use crate::{
@@ -23,6 +22,13 @@ use crate::{
 };
 use embedded_hal_nb::serial::Read;
 
+#[derive(Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum Bank {
+    A = 0,
+    B = 1,
+}
+
 //==================================================================================================
 // Type-Level support
 //==================================================================================================
@@ -232,6 +238,7 @@ impl From<Hertz> for Config {
 //==================================================================================================
 
 #[derive(Debug, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct IrqContextTimeoutOrMaxSize {
     rx_idx: usize,
     mode: IrqReceptionMode,
@@ -257,17 +264,19 @@ impl IrqContextTimeoutOrMaxSize {
 
 /// This struct is used to return the default IRQ handler result to the user
 #[derive(Debug, Default)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct IrqResult {
     pub bytes_read: usize,
-    pub errors: Option<IrqUartError>,
+    pub errors: Option<UartErrors>,
 }
 
 /// This struct is used to return the default IRQ handler result to the user
 #[derive(Debug, Default)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct IrqResultMaxSizeOrTimeout {
     complete: bool,
     timeout: bool,
-    pub errors: Option<IrqUartError>,
+    pub errors: Option<UartErrors>,
     pub bytes_read: usize,
 }
 
@@ -314,20 +323,22 @@ impl IrqResultMaxSizeOrTimeout {
 }
 
 #[derive(Debug, PartialEq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 enum IrqReceptionMode {
     Idle,
     Pending,
 }
 
 #[derive(Default, Debug, Copy, Clone)]
-pub struct IrqUartError {
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct UartErrors {
     overflow: bool,
     framing: bool,
     parity: bool,
     other: bool,
 }
 
-impl IrqUartError {
+impl UartErrors {
     #[inline(always)]
     pub fn overflow(&self) -> bool {
         self.overflow
@@ -349,7 +360,7 @@ impl IrqUartError {
     }
 }
 
-impl IrqUartError {
+impl UartErrors {
     #[inline(always)]
     pub fn error(&self) -> bool {
         self.overflow || self.framing || self.parity
@@ -401,7 +412,7 @@ impl Instance for pac::Uarta {
     }
     #[inline(always)]
     fn ptr() -> *const uart_base::RegisterBlock {
-        Uarta::ptr() as *const _
+        Self::ptr() as *const _
     }
 }
 
@@ -416,7 +427,7 @@ impl Instance for pac::Uartb {
     }
     #[inline(always)]
     fn ptr() -> *const uart_base::RegisterBlock {
-        Uarta::ptr() as *const _
+        Self::ptr() as *const _
     }
 }
 
@@ -752,6 +763,34 @@ where
     }
 }
 
+#[inline(always)]
+pub fn enable_rx(uart: &uart_base::RegisterBlock) {
+    uart.enable().modify(|_, w| w.rxenable().set_bit());
+}
+
+#[inline(always)]
+pub fn disable_rx(uart: &uart_base::RegisterBlock) {
+    uart.enable().modify(|_, w| w.rxenable().clear_bit());
+}
+
+#[inline(always)]
+pub fn enable_rx_interrupts(uart: &uart_base::RegisterBlock) {
+    uart.irq_enb().modify(|_, w| {
+        w.irq_rx().set_bit();
+        w.irq_rx_to().set_bit();
+        w.irq_rx_status().set_bit()
+    });
+}
+
+#[inline(always)]
+pub fn disable_rx_interrupts(uart: &uart_base::RegisterBlock) {
+    uart.irq_enb().modify(|_, w| {
+        w.irq_rx().clear_bit();
+        w.irq_rx_to().clear_bit();
+        w.irq_rx_status().clear_bit()
+    });
+}
+
 /// Serial receiver.
 ///
 /// Can be created by using the [Uart::split] or [UartBase::split] API.
@@ -760,6 +799,7 @@ pub struct Rx<Uart> {
 }
 
 impl<Uart: Instance> Rx<Uart> {
+    #[inline(always)]
     fn new(uart: Uart) -> Self {
         Self { uart }
     }
@@ -769,6 +809,7 @@ impl<Uart: Instance> Rx<Uart> {
     /// # Safety
     ///
     /// You must ensure that only registers related to the operation of the RX side are used.
+    #[inline(always)]
     pub unsafe fn uart(&self) -> &Uart {
         &self.uart
     }
@@ -778,14 +819,23 @@ impl<Uart: Instance> Rx<Uart> {
         self.uart.fifo_clr().write(|w| w.rxfifo().set_bit());
     }
 
+    #[inline]
+    pub fn disable_interrupts(&mut self) {
+        disable_rx_interrupts(unsafe { Uart::reg_block() });
+    }
+    #[inline]
+    pub fn enable_interrupts(&mut self) {
+        enable_rx_interrupts(unsafe { Uart::reg_block() });
+    }
+
     #[inline]
     pub fn enable(&mut self) {
-        self.uart.enable().modify(|_, w| w.rxenable().set_bit());
+        enable_rx(unsafe { Uart::reg_block() });
     }
 
     #[inline]
     pub fn disable(&mut self) {
-        self.uart.enable().modify(|_, w| w.rxenable().clear_bit());
+        disable_rx(unsafe { Uart::reg_block() });
     }
 
     /// Low level function to read a word from the UART FIFO.
@@ -819,6 +869,7 @@ impl<Uart: Instance> Rx<Uart> {
         RxWithInterrupt::new(self)
     }
 
+    #[inline(always)]
     pub fn release(self) -> Uart {
         self.uart
     }
@@ -877,14 +928,17 @@ impl<Uart: Instance> embedded_io::Read for Rx<Uart> {
     }
 }
 
+#[inline(always)]
 pub fn enable_tx(uart: &uart_base::RegisterBlock) {
     uart.enable().modify(|_, w| w.txenable().set_bit());
 }
 
+#[inline(always)]
 pub fn disable_tx(uart: &uart_base::RegisterBlock) {
     uart.enable().modify(|_, w| w.txenable().clear_bit());
 }
 
+#[inline(always)]
 pub fn enable_tx_interrupts(uart: &uart_base::RegisterBlock) {
     uart.irq_enb().modify(|_, w| {
         w.irq_tx().set_bit();
@@ -893,6 +947,7 @@ pub fn enable_tx_interrupts(uart: &uart_base::RegisterBlock) {
     });
 }
 
+#[inline(always)]
 pub fn disable_tx_interrupts(uart: &uart_base::RegisterBlock) {
     uart.irq_enb().modify(|_, w| {
         w.irq_tx().clear_bit();
@@ -914,12 +969,14 @@ impl<Uart: Instance> Tx<Uart> {
     /// # Safety
     ///
     /// Circumvents the HAL safety guarantees.
+    #[inline(always)]
     pub unsafe fn steal() -> Self {
         Self {
             uart: Uart::steal(),
         }
     }
 
+    #[inline(always)]
     fn new(uart: Uart) -> Self {
         Self { uart }
     }
@@ -929,6 +986,7 @@ impl<Uart: Instance> Tx<Uart> {
     /// # Safety
     ///
     /// You must ensure that only registers related to the operation of the TX side are used.
+    #[inline(always)]
     pub unsafe fn uart(&self) -> &Uart {
         &self.uart
     }
@@ -1055,10 +1113,10 @@ impl<Uart: Instance> embedded_io::Write for Tx<Uart> {
 ///
 ///  1. The first way simply empties the FIFO on an interrupt into a user provided buffer. You
 ///     can simply use [Self::start] to prepare the peripheral and then call the
-///     [Self::irq_handler] in the interrupt service routine.
+///     [Self::on_interrupt] in the interrupt service routine.
 ///  2. The second way reads packets bounded by a maximum size or a baudtick based timeout. You
 ///     can use [Self::read_fixed_len_or_timeout_based_using_irq] to prepare the peripheral and
-///     then call the [Self::irq_handler_max_size_or_timeout_based] in the interrupt service
+///     then call the [Self::on_interrupt_max_size_or_timeout_based] in the interrupt service
 ///     routine. You have to call [Self::read_fixed_len_or_timeout_based_using_irq] in the ISR to
 ///     start reading the next packet.
 pub struct RxWithInterrupt<Uart>(Rx<Uart>);
@@ -1069,7 +1127,7 @@ impl<Uart: Instance> RxWithInterrupt<Uart> {
     }
 
     /// This function should be called once at initialization time if the regular
-    /// [Self::irq_handler] is used to read the UART receiver to enable and start the receiver.
+    /// [Self::on_interrupt] is used to read the UART receiver to enable and start the receiver.
     pub fn start(&mut self) {
         self.0.enable();
         self.enable_rx_irq_sources(true);
@@ -1080,13 +1138,13 @@ impl<Uart: Instance> RxWithInterrupt<Uart> {
         &self.0.uart
     }
 
-    /// This function is used together with the [Self::irq_handler_max_size_or_timeout_based]
+    /// This function is used together with the [Self::on_interrupt_max_size_or_timeout_based]
     /// function to read packets with a maximum size or variable sized packets by using the
     /// receive timeout of the hardware.
     ///
     /// This function should be called once at initialization to initiate the context state
     /// and to [Self::start] the receiver. After that, it should be called after each
-    /// completed [Self::irq_handler_max_size_or_timeout_based] call to restart the reception
+    /// completed [Self::on_interrupt_max_size_or_timeout_based] call to restart the reception
     /// of a packet.
     pub fn read_fixed_len_or_timeout_based_using_irq(
         &mut self,
@@ -1266,7 +1324,7 @@ impl<Uart: Instance> RxWithInterrupt<Uart> {
 
     fn read_handler(
         &self,
-        errors: &mut Option<IrqUartError>,
+        errors: &mut Option<UartErrors>,
         read_res: &nb::Result<u8, RxError>,
     ) -> Option<u8> {
         match read_res {
@@ -1274,7 +1332,7 @@ impl<Uart: Instance> RxWithInterrupt<Uart> {
             Err(nb::Error::WouldBlock) => None,
             Err(nb::Error::Other(e)) => {
                 // Ensure `errors` is Some(IrqUartError), initializing if it's None
-                let err = errors.get_or_insert(IrqUartError::default());
+                let err = errors.get_or_insert(UartErrors::default());
 
                 // Now we can safely modify fields inside `err`
                 match e {
@@ -1287,14 +1345,14 @@ impl<Uart: Instance> RxWithInterrupt<Uart> {
         }
     }
 
-    fn check_for_errors(&self, errors: &mut Option<IrqUartError>) {
+    fn check_for_errors(&self, errors: &mut Option<UartErrors>) {
         let rx_status = self.uart().rxstatus().read();
 
         if rx_status.rxovr().bit_is_set()
             || rx_status.rxfrm().bit_is_set()
             || rx_status.rxpar().bit_is_set()
         {
-            let err = errors.get_or_insert(IrqUartError::default());
+            let err = errors.get_or_insert(UartErrors::default());
 
             if rx_status.rxovr().bit_is_set() {
                 err.overflow = true;
@@ -1331,5 +1389,8 @@ impl<Uart: Instance> RxWithInterrupt<Uart> {
     }
 }
 
-pub mod asynch;
+pub mod tx_asynch;
-pub use asynch::*;
+pub use tx_asynch::*;
+
+pub mod rx_asynch;
+pub use rx_asynch::*;

va108xx-hal/src/uart/rx_asynch.rs

@@ -0,0 +1,419 @@
+//! # Async UART reception functionality for the VA108xx family.
+//!
+//! This module provides the [RxAsync] and [RxAsyncSharedConsumer] struct which both implement the
+//! [embedded_io_async::Read] trait.
+//! This trait allows for asynchronous reception of data streams. Please note that this module does
+//! not specify/declare the interrupt handlers which must be provided for async support to work.
+//! However, it provides four interrupt handlers:
+//!
+//! - [on_interrupt_uart_a]
+//! - [on_interrupt_uart_b]
+//! - [on_interrupt_uart_a_overwriting]
+//! - [on_interrupt_uart_b_overwriting]
+//!
+//! The first two are used for the [RxAsync] struct, while the latter two are used with the
+//! [RxAsyncSharedConsumer] struct. The later two will overwrite old values in the used ring buffer.
+//!
+//! Error handling is performed in the user interrupt handler by checking the [AsyncUartErrors]
+//! structure returned by the interrupt handlers.
+//!
+//! # Example
+//!
+//! - [Async UART RX example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/embassy/src/bin/async-uart-rx.rs)
+use core::{cell::RefCell, convert::Infallible, future::Future, sync::atomic::Ordering};
+
+use critical_section::Mutex;
+use embassy_sync::waitqueue::AtomicWaker;
+use embedded_io::ErrorType;
+use heapless::spsc::Consumer;
+use portable_atomic::AtomicBool;
+use va108xx as pac;
+
+use super::{Instance, Rx, RxError, UartErrors};
+
+static UART_RX_WAKERS: [AtomicWaker; 2] = [const { AtomicWaker::new() }; 2];
+static RX_READ_ACTIVE: [AtomicBool; 2] = [const { AtomicBool::new(false) }; 2];
+static RX_HAS_DATA: [AtomicBool; 2] = [const { AtomicBool::new(false) }; 2];
+
+struct RxFuture {
+    uart_idx: usize,
+}
+
+impl RxFuture {
+    pub fn new<Uart: Instance>(_rx: &mut Rx<Uart>) -> Self {
+        RX_READ_ACTIVE[Uart::IDX as usize].store(true, Ordering::Relaxed);
+        Self {
+            uart_idx: Uart::IDX as usize,
+        }
+    }
+}
+
+impl Future for RxFuture {
+    type Output = Result<(), RxError>;
+
+    fn poll(
+        self: core::pin::Pin<&mut Self>,
+        cx: &mut core::task::Context<'_>,
+    ) -> core::task::Poll<Self::Output> {
+        UART_RX_WAKERS[self.uart_idx].register(cx.waker());
+        if RX_HAS_DATA[self.uart_idx].load(Ordering::Relaxed) {
+            return core::task::Poll::Ready(Ok(()));
+        }
+        core::task::Poll::Pending
+    }
+}
+
+#[derive(Debug, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct AsyncUartErrors {
+    /// Queue has overflowed, data might have been lost.
+    pub queue_overflow: bool,
+    /// UART errors.
+    pub uart_errors: UartErrors,
+}
+
+fn on_interrupt_handle_rx_errors<Uart: Instance>(uart: &Uart) -> Option<UartErrors> {
+    let rx_status = uart.rxstatus().read();
+    if rx_status.rxovr().bit_is_set()
+        || rx_status.rxfrm().bit_is_set()
+        || rx_status.rxpar().bit_is_set()
+    {
+        let mut errors_val = UartErrors::default();
+
+        if rx_status.rxovr().bit_is_set() {
+            errors_val.overflow = true;
+        }
+        if rx_status.rxfrm().bit_is_set() {
+            errors_val.framing = true;
+        }
+        if rx_status.rxpar().bit_is_set() {
+            errors_val.parity = true;
+        }
+        return Some(errors_val);
+    }
+    None
+}
+
+fn on_interrupt_rx_common_post_processing<Uart: Instance>(
+    uart: &Uart,
+    rx_enabled: bool,
+    read_some_data: bool,
+    irq_end: u32,
+) -> Option<UartErrors> {
+    if read_some_data {
+        RX_HAS_DATA[Uart::IDX as usize].store(true, Ordering::Relaxed);
+        if RX_READ_ACTIVE[Uart::IDX as usize].load(Ordering::Relaxed) {
+            UART_RX_WAKERS[Uart::IDX as usize].wake();
+        }
+    }
+
+    let mut errors = None;
+    // Check for RX errors
+    if rx_enabled {
+        errors = on_interrupt_handle_rx_errors(uart);
+    }
+
+    // Clear the interrupt status bits
+    uart.irq_clr().write(|w| unsafe { w.bits(irq_end) });
+    errors
+}
+
+/// Interrupt handler for UART A.
+///
+/// Should be called in the user interrupt handler to enable
+/// asynchronous reception. This variant will overwrite old data in the ring buffer in case
+/// the ring buffer is full.
+pub fn on_interrupt_uart_a_overwriting<const N: usize>(
+    prod: &mut heapless::spsc::Producer<u8, N>,
+    shared_consumer: &Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
+) -> Result<(), AsyncUartErrors> {
+    on_interrupt_rx_async_heapless_queue_overwriting(
+        unsafe { pac::Uarta::steal() },
+        prod,
+        shared_consumer,
+    )
+}
+
+/// Interrupt handler for UART B.
+///
+/// Should be called in the user interrupt handler to enable
+/// asynchronous reception. This variant will overwrite old data in the ring buffer in case
+/// the ring buffer is full.
+pub fn on_interrupt_uart_b_overwriting<const N: usize>(
+    prod: &mut heapless::spsc::Producer<u8, N>,
+    shared_consumer: &Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
+) -> Result<(), AsyncUartErrors> {
+    on_interrupt_rx_async_heapless_queue_overwriting(
+        unsafe { pac::Uartb::steal() },
+        prod,
+        shared_consumer,
+    )
+}
+
+pub fn on_interrupt_rx_async_heapless_queue_overwriting<Uart: Instance, const N: usize>(
+    uart: Uart,
+    prod: &mut heapless::spsc::Producer<u8, N>,
+    shared_consumer: &Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
+) -> Result<(), AsyncUartErrors> {
+    let irq_end = uart.irq_end().read();
+    let enb_status = uart.enable().read();
+    let rx_enabled = enb_status.rxenable().bit_is_set();
+    let mut read_some_data = false;
+    let mut queue_overflow = false;
+
+    // Half-Full interrupt. We have a guaranteed amount of data we can read.
+    if irq_end.irq_rx().bit_is_set() {
+        let available_bytes = uart.rxfifoirqtrg().read().bits() as usize;
+
+        // If this interrupt bit is set, the trigger level is available at the very least.
+        // Read everything as fast as possible
+        for _ in 0..available_bytes {
+            let byte = uart.data().read().bits();
+            if !prod.ready() {
+                queue_overflow = true;
+                critical_section::with(|cs| {
+                    let mut cons_ref = shared_consumer.borrow(cs).borrow_mut();
+                    cons_ref.as_mut().unwrap().dequeue();
+                });
+            }
+            prod.enqueue(byte as u8).ok();
+        }
+        read_some_data = true;
+    }
+
+    // Timeout, empty the FIFO completely.
+    if irq_end.irq_rx_to().bit_is_set() {
+        while uart.rxstatus().read().rdavl().bit_is_set() {
+            // While there is data in the FIFO, write it into the reception buffer
+            let byte = uart.data().read().bits();
+            if !prod.ready() {
+                queue_overflow = true;
+                critical_section::with(|cs| {
+                    let mut cons_ref = shared_consumer.borrow(cs).borrow_mut();
+                    cons_ref.as_mut().unwrap().dequeue();
+                });
+            }
+            prod.enqueue(byte as u8).ok();
+        }
+        read_some_data = true;
+    }
+
+    let uart_errors =
+        on_interrupt_rx_common_post_processing(&uart, rx_enabled, read_some_data, irq_end.bits());
+    if uart_errors.is_some() || queue_overflow {
+        return Err(AsyncUartErrors {
+            queue_overflow,
+            uart_errors: uart_errors.unwrap_or_default(),
+        });
+    }
+    Ok(())
+}
+
+/// Interrupt handler for UART A.
+///
+/// Should be called in the user interrupt handler to enable asynchronous reception.
+pub fn on_interrupt_uart_a<const N: usize>(
+    prod: &mut heapless::spsc::Producer<'_, u8, N>,
+) -> Result<(), AsyncUartErrors> {
+    on_interrupt_rx_async_heapless_queue(unsafe { pac::Uarta::steal() }, prod)
+}
+
+/// Interrupt handler for UART B.
+///
+/// Should be called in the user interrupt handler to enable asynchronous reception.
+pub fn on_interrupt_uart_b<const N: usize>(
+    prod: &mut heapless::spsc::Producer<'_, u8, N>,
+) -> Result<(), AsyncUartErrors> {
+    on_interrupt_rx_async_heapless_queue(unsafe { pac::Uartb::steal() }, prod)
+}
+
+pub fn on_interrupt_rx_async_heapless_queue<Uart: Instance, const N: usize>(
+    uart: Uart,
+    prod: &mut heapless::spsc::Producer<'_, u8, N>,
+) -> Result<(), AsyncUartErrors> {
+    //let uart = unsafe { Uart::steal() };
+    let irq_end = uart.irq_end().read();
+    let enb_status = uart.enable().read();
+    let rx_enabled = enb_status.rxenable().bit_is_set();
+    let mut read_some_data = false;
+    let mut queue_overflow = false;
+
+    // Half-Full interrupt. We have a guaranteed amount of data we can read.
+    if irq_end.irq_rx().bit_is_set() {
+        let available_bytes = uart.rxfifoirqtrg().read().bits() as usize;
+
+        // If this interrupt bit is set, the trigger level is available at the very least.
+        // Read everything as fast as possible
+        for _ in 0..available_bytes {
+            let byte = uart.data().read().bits();
+            if !prod.ready() {
+                queue_overflow = true;
+            }
+            prod.enqueue(byte as u8).ok();
+        }
+        read_some_data = true;
+    }
+
+    // Timeout, empty the FIFO completely.
+    if irq_end.irq_rx_to().bit_is_set() {
+        while uart.rxstatus().read().rdavl().bit_is_set() {
+            // While there is data in the FIFO, write it into the reception buffer
+            let byte = uart.data().read().bits();
+            if !prod.ready() {
+                queue_overflow = true;
+            }
+            prod.enqueue(byte as u8).ok();
+        }
+        read_some_data = true;
+    }
+
+    let uart_errors =
+        on_interrupt_rx_common_post_processing(&uart, rx_enabled, read_some_data, irq_end.bits());
+    if uart_errors.is_some() || queue_overflow {
+        return Err(AsyncUartErrors {
+            queue_overflow,
+            uart_errors: uart_errors.unwrap_or_default(),
+        });
+    }
+    Ok(())
+}
+
+struct ActiveReadGuard(usize);
+
+impl Drop for ActiveReadGuard {
+    fn drop(&mut self) {
+        RX_READ_ACTIVE[self.0].store(false, Ordering::Relaxed);
+    }
+}
+
+/// Core data structure to allow asynchronous UART reception.
+///
+/// If the ring buffer becomes full, data will be lost.
+pub struct RxAsync<Uart: Instance, const N: usize> {
+    rx: Rx<Uart>,
+    pub queue: heapless::spsc::Consumer<'static, u8, N>,
+}
+
+impl<Uart: Instance, const N: usize> ErrorType for RxAsync<Uart, N> {
+    /// Error reporting is done using the result of the interrupt functions.
+    type Error = Infallible;
+}
+
+impl<Uart: Instance, const N: usize> RxAsync<Uart, N> {
+    /// Create a new asynchronous receiver.
+    ///
+    /// The passed [heapless::spsc::Consumer] will be used to asynchronously receive data which
+    /// is filled by the interrupt handler.
+    pub fn new(mut rx: Rx<Uart>, queue: heapless::spsc::Consumer<'static, u8, N>) -> Self {
+        rx.disable_interrupts();
+        rx.disable();
+        rx.clear_fifo();
+        // Enable those together.
+        critical_section::with(|_| {
+            rx.enable_interrupts();
+            rx.enable();
+        });
+        Self { rx, queue }
+    }
+}
+
+impl<Uart: Instance, const N: usize> embedded_io_async::Read for RxAsync<Uart, N> {
+    async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
+        // Need to wait for the IRQ to read data and set this flag. If the queue is not
+        // empty, we can read data immediately.
+        if self.queue.len() == 0 {
+            RX_HAS_DATA[Uart::IDX as usize].store(false, Ordering::Relaxed);
+        }
+        let _guard = ActiveReadGuard(Uart::IDX as usize);
+        let mut handle_data_in_queue = |consumer: &mut heapless::spsc::Consumer<'static, u8, N>| {
+            let data_to_read = consumer.len().min(buf.len());
+            for byte in buf.iter_mut().take(data_to_read) {
+                // We own the consumer and we checked that the amount of data is guaranteed to be available.
+                *byte = unsafe { consumer.dequeue_unchecked() };
+            }
+            data_to_read
+        };
+        let fut = RxFuture::new(&mut self.rx);
+        // Data is available, so read that data immediately.
+        let read_data = handle_data_in_queue(&mut self.queue);
+        if read_data > 0 {
+            return Ok(read_data);
+        }
+        // Await data.
+        let _ = fut.await;
+        Ok(handle_data_in_queue(&mut self.queue))
+    }
+}
+
+/// Core data structure to allow asynchronous UART reception.
+///
+/// If the ring buffer becomes full, the oldest data will be overwritten when using the
+/// [on_interrupt_uart_a_overwriting] and [on_interrupt_uart_b_overwriting] interrupt handlers.
+pub struct RxAsyncSharedConsumer<Uart: Instance, const N: usize> {
+    rx: Rx<Uart>,
+    queue: &'static Mutex<RefCell<Option<Consumer<'static, u8, N>>>>,
+}
+
+impl<Uart: Instance, const N: usize> ErrorType for RxAsyncSharedConsumer<Uart, N> {
+    /// Error reporting is done using the result of the interrupt functions.
+    type Error = Infallible;
+}
+
+impl<Uart: Instance, const N: usize> RxAsyncSharedConsumer<Uart, N> {
+    /// Create a new asynchronous receiver.
+    ///
+    /// The passed shared [heapless::spsc::Consumer] will be used to asynchronously receive data
+    /// which is filled by the interrupt handler. The shared property allows using it in the
+    /// interrupt handler to overwrite old data.
+    pub fn new(
+        mut rx: Rx<Uart>,
+        queue: &'static Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
+    ) -> Self {
+        rx.disable_interrupts();
+        rx.disable();
+        rx.clear_fifo();
+        // Enable those together.
+        critical_section::with(|_| {
+            rx.enable_interrupts();
+            rx.enable();
+        });
+        Self { rx, queue }
+    }
+}
+
+impl<Uart: Instance, const N: usize> embedded_io_async::Read for RxAsyncSharedConsumer<Uart, N> {
+    async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
+        // Need to wait for the IRQ to read data and set this flag. If the queue is not
+        // empty, we can read data immediately.
+
+        critical_section::with(|cs| {
+            let queue = self.queue.borrow(cs);
+            if queue.borrow().as_ref().unwrap().len() == 0 {
+                RX_HAS_DATA[Uart::IDX as usize].store(false, Ordering::Relaxed);
+            }
+        });
+        let _guard = ActiveReadGuard(Uart::IDX as usize);
+        let mut handle_data_in_queue = || {
+            critical_section::with(|cs| {
+                let mut consumer_ref = self.queue.borrow(cs).borrow_mut();
+                let consumer = consumer_ref.as_mut().unwrap();
+                let data_to_read = consumer.len().min(buf.len());
+                for byte in buf.iter_mut().take(data_to_read) {
+                    // We own the consumer and we checked that the amount of data is guaranteed to be available.
+                    *byte = unsafe { consumer.dequeue_unchecked() };
+                }
+                data_to_read
+            })
+        };
+        let fut = RxFuture::new(&mut self.rx);
+        // Data is available, so read that data immediately.
+        let read_data = handle_data_in_queue();
+        if read_data > 0 {
+            return Ok(read_data);
+        }
+        // Await data.
+        let _ = fut.await;
+        let read_data = handle_data_in_queue();
+        Ok(read_data)
+    }
+}

va108xx-hal/src/uart/tx_asynch.rs

@@ -1,4 +1,4 @@
-//! # Async GPIO functionality for the VA108xx family.
+//! # Async UART transmission functionality for the VA108xx family.
 //!
 //! This module provides the [TxAsync] struct which implements the [embedded_io_async::Write] trait.
 //! This trait allows for asynchronous sending of data streams. Please note that this module does
@@ -13,7 +13,7 @@
 //!
 //! # Example
 //!
-//! - [Async UART example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/async-gpio/examples/embassy/src/bin/async-uart.rs)
+//! - [Async UART TX example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/embassy/src/bin/async-uart-tx.rs)
 use core::{cell::RefCell, future::Future};
 
 use critical_section::Mutex;
@@ -23,7 +23,7 @@ use portable_atomic::AtomicBool;
 
 use super::*;
 
-static UART_WAKERS: [AtomicWaker; 2] = [const { AtomicWaker::new() }; 2];
+static UART_TX_WAKERS: [AtomicWaker; 2] = [const { AtomicWaker::new() }; 2];
 static TX_CONTEXTS: [Mutex<RefCell<TxContext>>; 2] =
     [const { Mutex::new(RefCell::new(TxContext::new())) }; 2];
 // Completion flag. Kept outside of the context structure as an atomic to avoid
@@ -72,7 +72,7 @@ fn on_interrupt_uart_tx<Uart: Instance>(uart: Uart) {
         });
         // Transfer is done.
         TX_DONE[Uart::IDX as usize].store(true, core::sync::atomic::Ordering::Relaxed);
-        UART_WAKERS[Uart::IDX as usize].wake();
+        UART_TX_WAKERS[Uart::IDX as usize].wake();
         return;
     }
     // Safety: We documented that the user provided slice must outlive the future, so we convert
@@ -199,7 +199,7 @@ impl Future for TxFuture {
         self: core::pin::Pin<&mut Self>,
         cx: &mut core::task::Context<'_>,
     ) -> core::task::Poll<Self::Output> {
-        UART_WAKERS[self.uart_idx].register(cx.waker());
+        UART_TX_WAKERS[self.uart_idx].register(cx.waker());
         if TX_DONE[self.uart_idx].swap(false, core::sync::atomic::Ordering::Relaxed) {
             let progress = critical_section::with(|cs| {
                 TX_CONTEXTS[self.uart_idx].borrow(cs).borrow().progress

vorago-reb1/CHANGELOG.md

@@ -8,6 +8,12 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
+## [v0.7.0] 2025-02-13
+
+- Bumped `va108xx-hal` dependency to 0.9
+- Minor adjustments to `Button` API.
+- `Button`, `Led` and `Leds` now simply wrap a type using a tuple struct.
+
 ## [v0.6.0] 2024-09-30
 
 - Added M95M01 EEPROM module/API

vorago-reb1/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "vorago-reb1"
-version = "0.6.0"
+version = "0.7.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "Board Support Crate for the Vorago REB1 development board"
@@ -19,8 +19,7 @@ bitfield = ">=0.17, <=0.18"
 max116xx-10bit = "0.3"
 
 [dependencies.va108xx-hal]
-path = "../va108xx-hal"
+version = "0.9"
-version = ">=0.8, <0.9"
 features = ["rt"]
 
 [features]

vorago-reb1/src/button.rs

@@ -10,23 +10,22 @@ use va108xx_hal::{
     pac, InterruptConfig,
 };
 
-pub struct Button {
+#[derive(Debug)]
-    button: Pin<PA11, InputFloating>,
+pub struct Button(pub Pin<PA11, InputFloating>);
-}
 
 impl Button {
     pub fn new(pin: Pin<PA11, InputFloating>) -> Button {
-        Button { button: pin }
+        Button(pin)
     }
 
     #[inline]
     pub fn pressed(&mut self) -> bool {
-        self.button.is_low().ok().unwrap()
+        self.0.is_low().ok().unwrap()
     }
 
     #[inline]
     pub fn released(&mut self) -> bool {
-        self.button.is_high().ok().unwrap()
+        self.0.is_high().ok().unwrap()
     }
 
     /// Configures an IRQ on edge.
@@ -37,7 +36,7 @@ impl Button {
         syscfg: Option<&mut pac::Sysconfig>,
         irqsel: Option<&mut pac::Irqsel>,
     ) {
-        self.button
+        self.0
             .configure_edge_interrupt(edge_type, irq_cfg, syscfg, irqsel);
     }
 
@@ -49,7 +48,7 @@ impl Button {
         syscfg: Option<&mut pac::Sysconfig>,
         irqsel: Option<&mut pac::Irqsel>,
     ) {
-        self.button
+        self.0
             .configure_level_interrupt(level, irq_cfg, syscfg, irqsel);
     }
 
@@ -58,6 +57,6 @@ impl Button {
     /// Please note that you still have to set a clock divisor yourself using the
     /// [`va108xx_hal::clock::set_clk_div_register`] function in order for this to work.
     pub fn configure_filter_type(&mut self, filter: FilterType, clksel: FilterClkSel) {
-        self.button.configure_filter_type(filter, clksel);
+        self.0.configure_filter_type(filter, clksel);
     }
 }

vorago-reb1/src/leds.rs

@@ -15,15 +15,12 @@ pub type LD2 = Pin<PA10, PushPullOutput>;
 pub type LD3 = Pin<PA7, PushPullOutput>;
 pub type LD4 = Pin<PA6, PushPullOutput>;
 
-pub struct Leds {
+#[derive(Debug)]
-    leds: [Led; 3],
+pub struct Leds(pub [Led; 3]);
-}
 
 impl Leds {
     pub fn new(led_pin1: LD2, led_pin2: LD3, led_pin3: LD4) -> Leds {
-        Leds {
+        Leds([led_pin1.into(), led_pin2.into(), led_pin3.into()])
-            leds: [led_pin1.into(), led_pin2.into(), led_pin3.into()],
-        }
     }
 }
 
@@ -31,13 +28,13 @@ impl core::ops::Deref for Leds {
     type Target = [Led];
 
     fn deref(&self) -> &[Led] {
-        &self.leds
+        &self.0
     }
 }
 
 impl core::ops::DerefMut for Leds {
     fn deref_mut(&mut self) -> &mut [Led] {
-        &mut self.leds
+        &mut self.0
     }
 }
 
@@ -45,28 +42,25 @@ impl core::ops::Index<usize> for Leds {
     type Output = Led;
 
     fn index(&self, i: usize) -> &Led {
-        &self.leds[i]
+        &self.0[i]
     }
 }
 
 impl core::ops::IndexMut<usize> for Leds {
     fn index_mut(&mut self, i: usize) -> &mut Led {
-        &mut self.leds[i]
+        &mut self.0[i]
     }
 }
 
-pub struct Led {
+#[derive(Debug)]
-    pin: DynPin,
+pub struct Led(pub DynPin);
-}
 
 macro_rules! ctor {
 	($($ldx:ident),+) => {
 		$(
 			impl From<$ldx> for Led {
 				fn from(led: $ldx) -> Self {
-					Led {
+					Led(led.into())
-						pin: led.into()
-					}
 				}
 			}
 		)+
@@ -79,18 +73,18 @@ impl Led {
     /// Turns the LED off. Setting the pin high actually turns the LED off
     #[inline]
     pub fn off(&mut self) {
-        self.pin.set_high().ok();
+        self.0.set_high().ok();
     }
 
     /// Turns the LED on. Setting the pin low actually turns the LED on
     #[inline]
     pub fn on(&mut self) {
-        self.pin.set_low().ok();
+        self.0.set_low().ok();
     }
 
     /// Toggles the LED
     #[inline]
     pub fn toggle(&mut self) {
-        self.pin.toggle_with_toggle_reg().ok();
+        self.0.toggle_with_toggle_reg().ok();
     }
 }

vscode/launch.json

@@ -526,13 +526,37 @@
         {
             "type": "cortex-debug",
             "request": "launch",
-            "name": "Async UART",
+            "name": "Async UART TX",
             "servertype": "jlink",
             "cwd": "${workspaceRoot}",
             "device": "Cortex-M0",
             "svdFile": "./va108xx/svd/va108xx.svd.patched",
-            "preLaunchTask": "async-uart",
+            "preLaunchTask": "async-uart-tx",
-            "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/async-uart",
+            "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/async-uart-tx",
+            "interface": "jtag",
+            "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "auto",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
+        },
+        {
+            "type": "cortex-debug",
+            "request": "launch",
+            "name": "Async UART RX",
+            "servertype": "jlink",
+            "cwd": "${workspaceRoot}",
+            "device": "Cortex-M0",
+            "svdFile": "./va108xx/svd/va108xx.svd.patched",
+            "preLaunchTask": "async-uart-rx",
+            "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/async-uart-rx",
             "interface": "jtag",
             "runToEntryPoint": "main",
             "rttConfig": {

vscode/tasks.json

@@ -277,13 +277,23 @@
       ]
     },
     {
-      "label": "async-uart",
+      "label": "async-uart-tx",
       "type": "shell",
       "command": "~/.cargo/bin/cargo", // note: full path to the cargo
       "args": [
         "build",
         "--bin",
-        "async-uart"
+        "async-uart-tx"
+      ]
+    },
+    {
+      "label": "async-uart-rx",
+      "type": "shell",
+      "command": "~/.cargo/bin/cargo", // note: full path to the cargo
+      "args": [
+        "build",
+        "--bin",
+        "async-uart-rx"
       ]
     },
     {