va108xx-rs/va108xx-hal/CHANGELOG.md

Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[unreleased]

Changed

• Improves CascardSource handling and general API when chosing cascade sources.
• Replaced utility::unmask_irq by enable_interrupt and disable_interrupt API.
• Improve and fix SPI abstractions. Add new low level interface. The primary SPI constructor now only expects a configuration structure and the transfer configuration needs to be applied in a separate step.

Fixes

• Fixes for SPI peripheral: Flush implementation was incorrect and should now flush properly.

[v0.7.0] 2024-07-04

• Replace uarta and uartb Uart constructors by new constructor
• Replace SPI spia, spib and spic constructors by new constructor
• Replace I2C i2ca, i2cb constructors by new constructor. Update constructor to fail on invalid fast I2C speed system clock values
• Renamed gpio::pins to gpio::pin and gpio::dynpins to gpio::dynpin
• Simplify UART clock divider calculations and remove libm dependency consequently

[v0.6.0] 2024-06-16

• Updated embedded-hal to v1
• Added optional defmt v0.3 feature and support.

[v0.5.2] 2024-06-16

Fixed

• Replaced usage to ptr::write_volatile in UART module which is denied on more recent Rust compilers.

[v0.5.1]

Changes

• Updated dependencies:
  • cortex-m-rtic (dev-depencency) to 1.1.2
  • once_cell to 1.12.0
  • Other dependencies: Only revision has changed

[v0.5.0]

Added

• Reactored IRQ handling, so that unmask operations can be moved to HAL
• Added UART IRQ handler. Right now, can only perform reception, TX still needs to be done in a blocking manner
• Added RTIC template and RTIC UART IRQ application

Fixed

• Bugfix in UART code where RX and TX could not be enabled or disabled independently

[v0.4.3]

• Various smaller fixes for READMEs, update of links in documentation
• Simplified CI for github, do not use cross
• New blinky-pac example
• Use HAL delay in blinky example

[v0.4.2]

Added

• port_mux function to set pin function select manually

Changed

• Clear TX and RX FIFO in SPI transfer function

[v0.4.1]

Fixed

• Initial blockmode setting was not set in SPI constructor

[v0.4.0]

Changed

• Replaced Hertz by impl Into<Hertz> completely and removed + Copy where not necessary

[v0.3.1]

• Updated all links to point to new repository

[v0.3.0]

Added

• TIM Cascade example

Changed

• CountDownTimer new function now expects an impl Into<Hertz> instead of Hertz
• Primary repository now hosted on IRS external git: https://egit.irs.uni-stuttgart.de/rust/va108xx-hal
• Relicensed as Apache-2.0

[0.2.3]

Added

• Basic API for EDAC functionality
• PWM implementation and example
• API to perform peripheral resets

Changed

• Improved Timer API. It is now possible to simply use new on CountDownTimer

[0.2.2]

Added

• DelayUs and DelayMs trait implementations for timer
• SPI implementation for blocking API, supports blockmode as well
• Basic I2C implementation for blocking API

Changed

• API which expects values in Hertz now uses impl Into<Hertz> as input parameter

[0.2.1]

Added

• Adds the IRQ interface to configure interrupts on output and input pins
• Utility function to set up millisecond timer with TIM0
• Function to set clock divisor registers in clock module

Changed

• Minor optimizations and tweaks for GPIO module
• Moved the FilterClkSel struct to the clock module, re-exporting in gpio
• Clearing output state at initialization of Output pins

[0.2.0]

Changed

• New GPIO implementation which uses type-level programming. Implementation heavily based on the ATSAMD GPIO HAL: https://docs.rs/atsamd-hal/0.13.0/atsamd_hal/gpio/v2/index.html
• Changes to API, therefore minor version bump

Added

• UART implementation
• UART example
• Some bugfixes for GPIO implementation
• Rust edition updated to 2021

[0.1.0]

Added

• First version of the HAL which adds the GPIO implementation and timer implementation.
• Also adds some examples and helper files to set up new binary crates
• RTT example application
• Added basic test binary in form of an example
• README with basic instructions how to set up own binary crate