Merge pull request 'regenerate PAC' (#42) from regenerate-pac into main

Reviewed-on: #42

.gitignore

@@ -15,3 +15,5 @@ Cargo.lock
 
 /app.map
 /app.bin
+
+/Embed.toml

Embed.toml.sample

@@ -1,5 +1,5 @@
 [default.general]
-chip = "VA416xx"
+chip = "VA416xx_RAM"
 
 [default.rtt]
 enabled = true

bootloader/README.md

@@ -11,10 +11,10 @@ The bootloader uses the following memory map:
 | ------ | ---- |  ---- |
 | 0x0 | Bootloader start | code up to 0x3FFC bytes |
 | 0x3FFC | Bootloader CRC | word |
-| 0x4000 | App image A start | code up to 0x1DFFC (~120K) bytes |
+| 0x4000 | App image A start | code up to 0x1DFF8 (~120K) bytes |
 | 0x21FF8 | App image A CRC check length | word |
 | 0x21FFC | App image A CRC check value | word |
-| 0x22000 | App image B start | code up to 0x1DFFC (~120K) bytes |
+| 0x22000 | App image B start | code up to 0x1DFF8 (~120K) bytes |
 | 0x3FFF8 | App image B CRC check length | word |
 | 0x3FFFC | App image B CRC check value | word |
 | 0x40000 | End of NVM | end  |

bootloader/src/main.rs

@@ -53,7 +53,7 @@ const APP_A_START_ADDR: u32 = BOOTLOADER_END_ADDR;
 const APP_A_SIZE_ADDR: u32 = APP_B_END_ADDR - 8;
 // 0x21FFC
 const APP_A_CRC_ADDR: u32 = APP_B_END_ADDR - 4;
-pub const APP_A_END_ADDR: u32 = APP_B_END_ADDR - BOOTLOADER_END_ADDR / 2;
+pub const APP_A_END_ADDR: u32 = BOOTLOADER_END_ADDR + APP_IMG_SZ;
 
 //  0x22000
 const APP_B_START_ADDR: u32 = APP_A_END_ADDR;

examples/embassy/src/bin/uart-echo-with-irq.rs

@@ -1,3 +1,12 @@
+//! This is an example of using the UART HAL abstraction with the IRQ support and embassy.
+//!
+//! It uses the UART0 for communication with another MCU or a host computer (recommended).
+//! You can connect a USB-to-Serial converter to the UART0 pins and then use a serial terminal
+//! application like picocom to send data to the microcontroller, which should be echoed
+//! back to the sender.
+//!
+//! This application uses the interrupt support of the VA416xx to read the data arriving
+//! on the UART without requiring polling.
 #![no_std]
 #![no_main]
 use core::cell::RefCell;
@@ -77,7 +86,7 @@ async fn main(spawner: Spawner) {
         &clocks,
     );
     let (mut tx, rx) = uart0.split();
-    let mut rx = rx.to_rx_with_irq();
+    let mut rx = rx.into_rx_with_irq();
     rx.start();
     RX.lock(|static_rx| {
         static_rx.borrow_mut().replace(rx);
@@ -119,17 +128,14 @@ async fn blinky(mut led: Pin<PG5, OutputReadablePushPull>) {
 fn UART0_RX() {
     let mut buf: [u8; 16] = [0; 16];
     let mut read_len: usize = 0;
-    let mut irq_error = None;
+    let mut errors = None;
     RX.lock(|static_rx| {
         let mut rx_borrow = static_rx.borrow_mut();
         let rx_mut_ref = rx_borrow.as_mut().unwrap();
-        match rx_mut_ref.irq_handler(&mut buf) {
-            Ok(result) => {
-                read_len = result.bytes_read;
-            }
-            Err(e) => {
-                irq_error = Some(e);
-            }
+        let result = rx_mut_ref.irq_handler(&mut buf);
+        read_len = result.bytes_read;
+        if result.errors.is_some() {
+            errors = result.errors;
         }
     });
     let mut ringbuf_full = false;
@@ -146,8 +152,8 @@ fn UART0_RX() {
         });
     }
 
-    if irq_error.is_some() {
-        rprintln!("error in IRQ handler: {:?}", irq_error);
+    if errors.is_some() {
+        rprintln!("UART error: {:?}", errors);
     }
     if ringbuf_full {
         rprintln!("ringbuffer is full, deleted oldest data");

flashloader/src/main.rs

@@ -193,7 +193,7 @@ mod app {
         Mono::start(cx.core.SYST, clocks.sysclk().raw());
         CLOCKS.set(clocks).unwrap();
 
-        let mut rx = rx.to_rx_with_irq();
+        let mut rx = rx.into_rx_with_irq();
         let mut rx_context = IrqContextTimeoutOrMaxSize::new(MAX_TC_FRAME_SIZE);
         rx.read_fixed_len_or_timeout_based_using_irq(&mut rx_context)
             .expect("initiating UART RX failed");
@@ -293,8 +293,8 @@ mod app {
                         .read_fixed_len_or_timeout_based_using_irq(cx.local.rx_context)
                         .expect("read operation failed");
                 }
-                if result.error() {
-                    log::warn!("UART error: {:?}", result.error());
+                if result.has_errors() {
+                    log::warn!("UART error: {:?}", result.errors.unwrap());
                 }
             }
             Err(e) => {

scripts/memory_app_a.x

@@ -1,7 +1,7 @@
 /* Special linker script for application slot A with an offset at address 0x4000 */
 MEMORY
 {
-	FLASH : ORIGIN = 0x00004000, LENGTH = 256K
+	FLASH : ORIGIN = 0x00004000, LENGTH = 0x1DFF8
 	/* RAM is a mandatory region. This RAM refers to the SRAM_0 */
 	RAM : ORIGIN = 0x1FFF8000, LENGTH = 32K
 	SRAM_1 : ORIGIN = 0x20000000, LENGTH = 32K

scripts/memory_app_b.x

@@ -1,7 +1,7 @@
 /* Special linker script for application slot B with an offset at address 0x22000 */
 MEMORY
 {
-	FLASH : ORIGIN = 0x00022000, LENGTH = 256K
+	FLASH : ORIGIN = 0x00022000, LENGTH = 0x1DFF8
 	/* RAM is a mandatory region. This RAM refers to the SRAM_0 */
 	RAM : ORIGIN = 0x1FFF8000, LENGTH = 32K
 	SRAM_1 : ORIGIN = 0x20000000, LENGTH = 32K

va416xx-hal/CHANGELOG.md

@@ -8,6 +8,8 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 # [unreleased]
 
+# [v0.3.0] 2024-30-09
+
 ## Changed
 
 - Improve and fix SPI abstractions. Add new low level interface. The primary SPI constructor now
@@ -16,6 +18,8 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Added an additional way to read the UART RX with IRQs. The module documentation provides
   more information.
 - Made the UART with IRQ API more flexible for future additions.
+- Improved UART API result and error handling, added low level API to read from and write
+  to the FIFO directly
 
 ## Fixed
 

va416xx-hal/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "va416xx-hal"
-version = "0.2.0"
+version = "0.3.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "HAL for the Vorago VA416xx family of MCUs"

va416xx-hal/src/gpio/reg.rs

@@ -113,14 +113,6 @@ pub(super) unsafe trait RegisterInterface {
     /// this type.
     fn id(&self) -> DynPinId;
 
-    const PORTA: *const PortRegisterBlock = Porta::ptr();
-    const PORTB: *const PortRegisterBlock = Portb::ptr();
-    const PORTC: *const PortRegisterBlock = Portc::ptr();
-    const PORTD: *const PortRegisterBlock = Portd::ptr();
-    const PORTE: *const PortRegisterBlock = Porte::ptr();
-    const PORTF: *const PortRegisterBlock = Portf::ptr();
-    const PORTG: *const PortRegisterBlock = Portg::ptr();
-
     /// Change the pin mode
     #[inline]
     fn change_mode(&mut self, mode: DynPinMode) {
@@ -155,13 +147,13 @@ pub(super) unsafe trait RegisterInterface {
     #[inline]
     fn port_reg(&self) -> &PortRegisterBlock {
         match self.id().group {
-            DynGroup::A => unsafe { &(*Self::PORTA) },
-            DynGroup::B => unsafe { &(*Self::PORTB) },
-            DynGroup::C => unsafe { &(*Self::PORTC) },
-            DynGroup::D => unsafe { &(*Self::PORTD) },
-            DynGroup::E => unsafe { &(*Self::PORTE) },
-            DynGroup::F => unsafe { &(*Self::PORTF) },
-            DynGroup::G => unsafe { &(*Self::PORTG) },
+            DynGroup::A => unsafe { &(*Porta::ptr()) },
+            DynGroup::B => unsafe { &(*Portb::ptr()) },
+            DynGroup::C => unsafe { &(*Portc::ptr()) },
+            DynGroup::D => unsafe { &(*Portd::ptr()) },
+            DynGroup::E => unsafe { &(*Porte::ptr()) },
+            DynGroup::F => unsafe { &(*Portf::ptr()) },
+            DynGroup::G => unsafe { &(*Portg::ptr()) },
         }
     }
 

va416xx-hal/src/uart.rs

@@ -9,6 +9,7 @@
 //! - [UART simple example](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/examples/simple/examples/uart.rs)
 //! - [UART echo with IRQ and Embassy](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/examples/embassy/src/bin/uart-echo-with-irq.rs)
 //! - [Flashloader app using UART with IRQs](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/flashloader)
+use core::convert::Infallible;
 use core::ops::Deref;
 
 use embedded_hal_nb::serial::Read;
@@ -69,15 +70,58 @@ impl RxPin<Uart2> for Pin<PF9, AltFunc1> {}
 // Regular Definitions
 //==================================================================================================
 
-#[derive(Debug)]
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct TransferPendingError;
+
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum RxError {
+    Overrun,
+    Framing,
+    Parity,
+}
+#[derive(Debug, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum Error {
-    Overrun,
-    FramingError,
-    ParityError,
+    Rx(RxError),
     BreakCondition,
-    TransferPending,
-    BufferTooShort,
+}
+
+impl From<RxError> for Error {
+    fn from(value: RxError) -> Self {
+        Self::Rx(value)
+    }
+}
+
+impl embedded_io::Error for Error {
+    fn kind(&self) -> embedded_io::ErrorKind {
+        embedded_io::ErrorKind::Other
+    }
+}
+
+impl embedded_io::Error for RxError {
+    fn kind(&self) -> embedded_io::ErrorKind {
+        embedded_io::ErrorKind::Other
+    }
+}
+impl embedded_hal_nb::serial::Error for RxError {
+    fn kind(&self) -> embedded_hal_nb::serial::ErrorKind {
+        match self {
+            RxError::Overrun => embedded_hal_nb::serial::ErrorKind::Overrun,
+            RxError::Framing => embedded_hal_nb::serial::ErrorKind::FrameFormat,
+            RxError::Parity => embedded_hal_nb::serial::ErrorKind::Parity,
+        }
+    }
+}
+
+impl embedded_hal_nb::serial::Error for Error {
+    fn kind(&self) -> embedded_hal_nb::serial::ErrorKind {
+        match self {
+            Error::Rx(rx_error) => embedded_hal_nb::serial::Error::kind(rx_error),
+            Error::BreakCondition => embedded_hal_nb::serial::ErrorKind::Other,
+        }
+    }
 }
 
 #[derive(Debug, PartialEq, Eq, Copy, Clone)]
@@ -231,50 +275,47 @@ impl IrqContextTimeoutOrMaxSize {
 #[derive(Debug, Default)]
 pub struct IrqResult {
     pub bytes_read: usize,
-    pub errors: IrqUartError,
+    pub errors: Option<IrqUartError>,
 }
 
 /// This struct is used to return the default IRQ handler result to the user
 #[derive(Debug, Default)]
-pub struct IrqResultMaxSizeTimeout {
+pub struct IrqResultMaxSizeOrTimeout {
     complete: bool,
     timeout: bool,
-    pub errors: IrqUartError,
+    pub errors: Option<IrqUartError>,
     pub bytes_read: usize,
 }
 
-impl IrqResultMaxSizeTimeout {
+impl IrqResultMaxSizeOrTimeout {
     pub fn new() -> Self {
-        IrqResultMaxSizeTimeout {
+        IrqResultMaxSizeOrTimeout {
             complete: false,
             timeout: false,
-            errors: IrqUartError::default(),
+            errors: None,
             bytes_read: 0,
         }
     }
 }
-impl IrqResultMaxSizeTimeout {
+impl IrqResultMaxSizeOrTimeout {
     #[inline]
-    pub fn error(&self) -> bool {
-        if self.errors.overflow || self.errors.parity || self.errors.framing {
-            return true;
-        }
-        false
+    pub fn has_errors(&self) -> bool {
+        self.errors.is_some()
     }
 
     #[inline]
     pub fn overflow_error(&self) -> bool {
-        self.errors.overflow
+        self.errors.map_or(false, |e| e.overflow)
     }
 
     #[inline]
     pub fn framing_error(&self) -> bool {
-        self.errors.framing
+        self.errors.map_or(false, |e| e.framing)
     }
 
     #[inline]
     pub fn parity_error(&self) -> bool {
-        self.errors.parity
+        self.errors.map_or(false, |e| e.parity)
     }
 
     #[inline]
@@ -294,44 +335,54 @@ enum IrqReceptionMode {
     Pending,
 }
 
-//==================================================================================================
-// UART implementation
-//==================================================================================================
-
-/// Type erased variant of a UART. Can be created with the [Uart::downgrade] function.
-pub struct UartBase<Uart> {
-    uart: Uart,
-    tx: Tx<Uart>,
-    rx: Rx<Uart>,
-}
-/// Serial abstraction. Entry point to create a new UART
-pub struct Uart<UartInstance, Pins> {
-    inner: UartBase<UartInstance>,
-    pins: Pins,
+#[derive(Default, Debug, Copy, Clone)]
+pub struct IrqUartError {
+    overflow: bool,
+    framing: bool,
+    parity: bool,
+    other: bool,
 }
 
-/// Serial receiver.
-///
-/// Can be created by using the [Uart::split] or [UartBase::split] API.
-pub struct Rx<Uart>(Uart);
+impl IrqUartError {
+    #[inline(always)]
+    pub fn overflow(&self) -> bool {
+        self.overflow
+    }
 
-/// Serial transmitter
-///
-/// Can be created by using the [Uart::split] or [UartBase::split] API.
-pub struct Tx<Uart>(Uart);
+    #[inline(always)]
+    pub fn framing(&self) -> bool {
+        self.framing
+    }
 
-impl<Uart: Instance> Rx<Uart> {
-    fn new(uart: Uart) -> Self {
-        Self(uart)
+    #[inline(always)]
+    pub fn parity(&self) -> bool {
+        self.parity
+    }
+
+    #[inline(always)]
+    pub fn other(&self) -> bool {
+        self.other
     }
 }
 
-impl<Uart> Tx<Uart> {
-    fn new(uart: Uart) -> Self {
-        Self(uart)
+impl IrqUartError {
+    #[inline(always)]
+    pub fn error(&self) -> bool {
+        self.overflow || self.framing || self.parity
     }
 }
 
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct BufferTooShortError {
+    found: usize,
+    expected: usize,
+}
+
+//==================================================================================================
+// UART peripheral wrapper
+//==================================================================================================
+
 pub trait Instance: Deref<Target = uart_base::RegisterBlock> {
     const IDX: u8;
     const PERIPH_SEL: PeripheralSelect;
@@ -389,6 +440,17 @@ impl Instance for Uart2 {
     }
 }
 
+//==================================================================================================
+// UART implementation
+//==================================================================================================
+
+/// Type erased variant of a UART. Can be created with the [Uart::downgrade] function.
+pub struct UartBase<Uart> {
+    uart: Uart,
+    tx: Tx<Uart>,
+    rx: Rx<Uart>,
+}
+
 impl<Uart: Instance> UartBase<Uart> {
     fn init(self, config: Config, clocks: &Clocks) -> Self {
         if Uart::IDX == 2 {
@@ -522,6 +584,46 @@ impl<Uart: Instance> UartBase<Uart> {
     }
 }
 
+impl<UartInstance> embedded_io::ErrorType for UartBase<UartInstance> {
+    type Error = Error;
+}
+
+impl<UartInstance> embedded_hal_nb::serial::ErrorType for UartBase<UartInstance> {
+    type Error = Error;
+}
+
+impl<Uart: Instance> embedded_hal_nb::serial::Read<u8> for UartBase<Uart> {
+    fn read(&mut self) -> nb::Result<u8, Self::Error> {
+        self.rx.read().map_err(|e| e.map(Error::Rx))
+    }
+}
+
+impl<Uart: Instance> embedded_hal_nb::serial::Write<u8> for UartBase<Uart> {
+    fn write(&mut self, word: u8) -> nb::Result<(), Self::Error> {
+        self.tx.write(word).map_err(|e| {
+            if let nb::Error::Other(_) = e {
+                unreachable!()
+            }
+            nb::Error::WouldBlock
+        })
+    }
+
+    fn flush(&mut self) -> nb::Result<(), Self::Error> {
+        self.tx.flush().map_err(|e| {
+            if let nb::Error::Other(_) = e {
+                unreachable!()
+            }
+            nb::Error::WouldBlock
+        })
+    }
+}
+
+/// Serial abstraction. Entry point to create a new UART
+pub struct Uart<UartInstance, Pins> {
+    inner: UartBase<UartInstance>,
+    pins: Pins,
+}
+
 impl<TxPinInst: TxPin<UartInstance>, RxPinInst: RxPin<UartInstance>, UartInstance: Instance>
     Uart<UartInstance, (TxPinInst, RxPinInst)>
 {
@@ -617,7 +719,16 @@ impl<TxPinInst: TxPin<UartInstance>, RxPinInst: RxPin<UartInstance>, UartInstanc
     }
 }
 
+/// Serial receiver.
+///
+/// Can be created by using the [Uart::split] or [UartBase::split] API.
+pub struct Rx<Uart>(Uart);
+
 impl<Uart: Instance> Rx<Uart> {
+    fn new(uart: Uart) -> Self {
+        Self(uart)
+    }
+
     /// Direct access to the peripheral structure.
     ///
     /// # Safety
@@ -642,7 +753,34 @@ impl<Uart: Instance> Rx<Uart> {
         self.0.enable().modify(|_, w| w.rxenable().clear_bit());
     }
 
-    pub fn to_rx_with_irq(self) -> RxWithIrq<Uart> {
+    /// Low level function to read a word from the UART FIFO.
+    ///
+    /// Uses the [nb] API to allow usage in blocking and non-blocking contexts.
+    ///
+    /// Please note that you might have to mask the returned value with 0xff to retrieve the actual
+    /// value if you use the manual parity mode. See chapter 11.4.1 for more information.
+    #[inline(always)]
+    pub fn read_fifo(&self) -> nb::Result<u32, Infallible> {
+        if self.0.rxstatus().read().rdavl().bit_is_clear() {
+            return Err(nb::Error::WouldBlock);
+        }
+        Ok(self.read_fifo_unchecked())
+    }
+
+    /// Low level function to read a word from from the UART FIFO.
+    ///
+    /// This does not necesarily mean there is a word in the FIFO available.
+    /// Use the [Self::read_fifo] function to read a word from the FIFO reliably using the [nb]
+    /// API.
+    ///
+    /// Please note that you might have to mask the returned value with 0xff to retrieve the actual
+    /// value if you use the manual parity mode. See chapter 11.4.1 for more information.
+    #[inline(always)]
+    pub fn read_fifo_unchecked(&self) -> u32 {
+        self.0.data().read().bits()
+    }
+
+    pub fn into_rx_with_irq(self) -> RxWithIrq<Uart> {
         RxWithIrq(self)
     }
 
@@ -651,7 +789,69 @@ impl<Uart: Instance> Rx<Uart> {
     }
 }
 
+impl<Uart> embedded_io::ErrorType for Rx<Uart> {
+    type Error = RxError;
+}
+
+impl<Uart> embedded_hal_nb::serial::ErrorType for Rx<Uart> {
+    type Error = RxError;
+}
+
+impl<Uart: Instance> embedded_hal_nb::serial::Read<u8> for Rx<Uart> {
+    fn read(&mut self) -> nb::Result<u8, Self::Error> {
+        let uart = unsafe { &(*Uart::ptr()) };
+        let status_reader = uart.rxstatus().read();
+        let err = if status_reader.rxovr().bit_is_set() {
+            Some(RxError::Overrun)
+        } else if status_reader.rxfrm().bit_is_set() {
+            Some(RxError::Framing)
+        } else if status_reader.rxpar().bit_is_set() {
+            Some(RxError::Parity)
+        } else {
+            None
+        };
+        if let Some(err) = err {
+            // The status code is always related to the next bit for the framing
+            // and parity status bits. We have to read the DATA register
+            // so that the next status reflects the next DATA word
+            // For overrun error, we read as well to clear the peripheral
+            self.read_fifo_unchecked();
+            return Err(err.into());
+        }
+        self.read_fifo().map(|val| (val & 0xff) as u8).map_err(|e| {
+            if let nb::Error::Other(_) = e {
+                unreachable!()
+            }
+            nb::Error::WouldBlock
+        })
+    }
+}
+
+impl<Uart: Instance> embedded_io::Read for Rx<Uart> {
+    fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
+        if buf.is_empty() {
+            return Ok(0);
+        }
+
+        for byte in buf.iter_mut() {
+            let w = nb::block!(<Self as embedded_hal_nb::serial::Read<u8>>::read(self))?;
+            *byte = w;
+        }
+
+        Ok(buf.len())
+    }
+}
+
+/// Serial transmitter
+///
+/// Can be created by using the [Uart::split] or [UartBase::split] API.
+pub struct Tx<Uart>(Uart);
+
 impl<Uart: Instance> Tx<Uart> {
+    fn new(uart: Uart) -> Self {
+        Self(uart)
+    }
+
     /// Direct access to the peripheral structure.
     ///
     /// # Safety
@@ -675,54 +875,80 @@ impl<Uart: Instance> Tx<Uart> {
     pub fn disable(&mut self) {
         self.0.enable().modify(|_, w| w.txenable().clear_bit());
     }
-}
 
-#[derive(Default, Debug)]
-pub struct IrqUartError {
-    overflow: bool,
-    framing: bool,
-    parity: bool,
-    other: bool,
-}
-
-impl IrqUartError {
+    /// Low level function to write a word to the UART FIFO.
+    ///
+    /// Uses the [nb] API to allow usage in blocking and non-blocking contexts.
+    ///
+    /// Please note that you might have to mask the returned value with 0xff to retrieve the actual
+    /// value if you use the manual parity mode. See chapter 11.4.1 for more information.
     #[inline(always)]
-    pub fn overflow(&self) -> bool {
-        self.overflow
+    pub fn write_fifo(&self, data: u32) -> nb::Result<(), Infallible> {
+        if self.0.txstatus().read().wrrdy().bit_is_clear() {
+            return Err(nb::Error::WouldBlock);
+        }
+        self.write_fifo_unchecked(data);
+        Ok(())
     }
 
+    /// Low level function to write a word to the UART FIFO.
+    ///
+    /// This does not necesarily mean that the FIFO can process another word because it might be
+    /// full.
+    /// Use the [Self::write_fifo] function to write a word to the FIFO reliably using the [nb]
+    /// API.
     #[inline(always)]
-    pub fn framing(&self) -> bool {
-        self.framing
-    }
-
-    #[inline(always)]
-    pub fn parity(&self) -> bool {
-        self.parity
-    }
-
-    #[inline(always)]
-    pub fn other(&self) -> bool {
-        self.other
+    pub fn write_fifo_unchecked(&self, data: u32) {
+        self.0.data().write(|w| unsafe { w.bits(data) });
     }
 }
 
-impl IrqUartError {
-    #[inline(always)]
-    pub fn error(&self) -> bool {
-        self.overflow || self.framing || self.parity
+impl<Uart> embedded_io::ErrorType for Tx<Uart> {
+    type Error = Infallible;
+}
+
+impl<Uart> embedded_hal_nb::serial::ErrorType for Tx<Uart> {
+    type Error = Infallible;
+}
+
+impl<Uart: Instance> embedded_hal_nb::serial::Write<u8> for Tx<Uart> {
+    fn write(&mut self, word: u8) -> nb::Result<(), Self::Error> {
+        self.write_fifo(word as u32)
+    }
+
+    fn flush(&mut self) -> nb::Result<(), Self::Error> {
+        // SAFETY: Only TX related registers are used.
+        let reader = unsafe { &(*Uart::ptr()) }.txstatus().read();
+        if reader.wrbusy().bit_is_set() {
+            return Err(nb::Error::WouldBlock);
+        }
+        Ok(())
     }
 }
 
-#[derive(Debug)]
-pub enum IrqError {
-    BufferTooShort { found: usize, expected: usize },
-    Uart(IrqUartError),
+impl<Uart: Instance> embedded_io::Write for Tx<Uart> {
+    fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
+        if buf.is_empty() {
+            return Ok(0);
+        }
+
+        for byte in buf.iter() {
+            nb::block!(<Self as embedded_hal_nb::serial::Write<u8>>::write(
+                self, *byte
+            ))?;
+        }
+
+        Ok(buf.len())
+    }
+
+    fn flush(&mut self) -> Result<(), Self::Error> {
+        nb::block!(<Self as embedded_hal_nb::serial::Write<u8>>::flush(self))
+    }
 }
 
 /// Serial receiver, using interrupts to offload reading to the hardware.
 ///
-/// You can use [Rx::to_rx_with_irq] to convert a normal [Rx] structure into this structure.
+/// You can use [Rx::into_rx_with_irq] to convert a normal [Rx] structure into this structure.
 /// This structure provides two distinct ways to read the UART RX using interrupts. It should
 /// be noted that the interrupt service routine (ISR) still has to be provided by the user. However,
 /// this structure provides API calls which can be used inside the ISRs to simplify the reading
@@ -763,9 +989,9 @@ impl<Uart: Instance> RxWithIrq<Uart> {
     pub fn read_fixed_len_or_timeout_based_using_irq(
         &mut self,
         context: &mut IrqContextTimeoutOrMaxSize,
-    ) -> Result<(), Error> {
+    ) -> Result<(), TransferPendingError> {
         if context.mode != IrqReceptionMode::Idle {
-            return Err(Error::TransferPending);
+            return Err(TransferPendingError);
         }
         context.mode = IrqReceptionMode::Pending;
         context.rx_idx = 0;
@@ -804,8 +1030,9 @@ impl<Uart: Instance> RxWithIrq<Uart> {
     /// result of the operation.
     ///
     /// This function will not disable the RX interrupts, so you don't need to call any other
-    /// API after calling this function to continue emptying the FIFO.
-    pub fn irq_handler(&mut self, buf: &mut [u8; 16]) -> Result<IrqResult, IrqUartError> {
+    /// API after calling this function to continue emptying the FIFO. RX errors are handled
+    /// as partial errors and are returned as part of the [IrqResult].
+    pub fn irq_handler(&mut self, buf: &mut [u8; 16]) -> IrqResult {
         let mut result = IrqResult::default();
 
         let irq_end = self.uart().irq_end().read();
@@ -847,7 +1074,7 @@ impl<Uart: Instance> RxWithIrq<Uart> {
         self.uart()
             .irq_clr()
             .write(|w| unsafe { w.bits(irq_end.bits()) });
-        Ok(result)
+        result
     }
 
     /// This function should be called in the user provided UART interrupt handler.
@@ -860,19 +1087,20 @@ impl<Uart: Instance> RxWithIrq<Uart> {
     /// [IrqContextTimeoutOrMaxSize] structure.
     ///
     /// If passed buffer is equal to or larger than the specified maximum length, an
-    /// [`Error::BufferTooShort`] will be returned
+    /// [BufferTooShortError] will be returned. Other RX errors are treated as partial errors
+    /// and returned inside the [IrqResultMaxSizeOrTimeout] structure.
     pub fn irq_handler_max_size_or_timeout_based(
         &mut self,
         context: &mut IrqContextTimeoutOrMaxSize,
         buf: &mut [u8],
-    ) -> Result<IrqResultMaxSizeTimeout, IrqError> {
+    ) -> Result<IrqResultMaxSizeOrTimeout, BufferTooShortError> {
         if buf.len() < context.max_len {
-            return Err(IrqError::BufferTooShort {
+            return Err(BufferTooShortError {
                 found: buf.len(),
                 expected: context.max_len,
             });
         }
-        let mut result = IrqResultMaxSizeTimeout::default();
+        let mut result = IrqResultMaxSizeOrTimeout::default();
 
         let irq_end = self.uart().irq_end().read();
         let enb_status = self.uart().enable().read();
@@ -936,49 +1164,51 @@ impl<Uart: Instance> RxWithIrq<Uart> {
 
     fn read_handler(
         &self,
-        errors: &mut IrqUartError,
-        read_res: &nb::Result<u8, Error>,
+        errors: &mut Option<IrqUartError>,
+        read_res: &nb::Result<u8, RxError>,
     ) -> Option<u8> {
         match read_res {
             Ok(byte) => Some(*byte),
             Err(nb::Error::WouldBlock) => None,
             Err(nb::Error::Other(e)) => {
+                // Ensure `errors` is Some(IrqUartError), initializing if it's None
+                let err = errors.get_or_insert(IrqUartError::default());
+
+                // Now we can safely modify fields inside `err`
                 match e {
-                    Error::Overrun => {
-                        errors.overflow = true;
-                    }
-                    Error::FramingError => {
-                        errors.framing = true;
-                    }
-                    Error::ParityError => {
-                        errors.parity = true;
-                    }
-                    _ => {
-                        errors.other = true;
-                    }
+                    RxError::Overrun => err.overflow = true,
+                    RxError::Framing => err.framing = true,
+                    RxError::Parity => err.parity = true,
                 }
                 None
             }
         }
     }
 
-    fn check_for_errors(&self, errors: &mut IrqUartError) {
-        // Read status register again, might have changed since reading received data
+    fn check_for_errors(&self, errors: &mut Option<IrqUartError>) {
         let rx_status = self.uart().rxstatus().read();
-        if rx_status.rxovr().bit_is_set() {
-            errors.overflow = true;
-        }
-        if rx_status.rxfrm().bit_is_set() {
-            errors.framing = true;
-        }
-        if rx_status.rxpar().bit_is_set() {
-            errors.parity = true;
+
+        if rx_status.rxovr().bit_is_set()
+            || rx_status.rxfrm().bit_is_set()
+            || rx_status.rxpar().bit_is_set()
+        {
+            let err = errors.get_or_insert(IrqUartError::default());
+
+            if rx_status.rxovr().bit_is_set() {
+                err.overflow = true;
+            }
+            if rx_status.rxfrm().bit_is_set() {
+                err.framing = true;
+            }
+            if rx_status.rxpar().bit_is_set() {
+                err.parity = true;
+            }
         }
     }
 
     fn irq_completion_handler_max_size_timeout(
         &mut self,
-        res: &mut IrqResultMaxSizeTimeout,
+        res: &mut IrqResultMaxSizeOrTimeout,
         context: &mut IrqContextTimeoutOrMaxSize,
     ) {
         self.disable_rx_irq_sources();
@@ -989,150 +1219,12 @@ impl<Uart: Instance> RxWithIrq<Uart> {
         context.rx_idx = 0;
     }
 
-    pub fn release(self) -> Uart {
+    /// # Safety
+    ///
+    /// This API allows creating multiple UART instances when releasing the TX structure as well.
+    /// The user must ensure that these instances are not used to create multiple overlapping
+    /// UART drivers.
+    pub unsafe fn release(self) -> Uart {
         self.0.release()
     }
 }
-
-impl embedded_io::Error for Error {
-    fn kind(&self) -> embedded_io::ErrorKind {
-        embedded_io::ErrorKind::Other
-    }
-}
-
-impl embedded_hal_nb::serial::Error for Error {
-    fn kind(&self) -> embedded_hal_nb::serial::ErrorKind {
-        embedded_hal_nb::serial::ErrorKind::Other
-    }
-}
-
-impl<Uart> embedded_io::ErrorType for Rx<Uart> {
-    type Error = Error;
-}
-
-impl<Uart> embedded_hal_nb::serial::ErrorType for Rx<Uart> {
-    type Error = Error;
-}
-
-impl<Uart: Instance> embedded_hal_nb::serial::Read<u8> for Rx<Uart> {
-    fn read(&mut self) -> nb::Result<u8, Self::Error> {
-        let uart = unsafe { &(*Uart::ptr()) };
-        let status_reader = uart.rxstatus().read();
-        let err = if status_reader.rxovr().bit_is_set() {
-            Some(Error::Overrun)
-        } else if status_reader.rxfrm().bit_is_set() {
-            Some(Error::FramingError)
-        } else if status_reader.rxpar().bit_is_set() {
-            Some(Error::ParityError)
-        } else {
-            None
-        };
-        if let Some(err) = err {
-            // The status code is always related to the next bit for the framing
-            // and parity status bits. We have to read the DATA register
-            // so that the next status reflects the next DATA word
-            // For overrun error, we read as well to clear the peripheral
-            uart.data().read().bits();
-            Err(err.into())
-        } else if status_reader.rdavl().bit_is_set() {
-            let data = uart.data().read().bits();
-            Ok((data & 0xff) as u8)
-        } else {
-            Err(nb::Error::WouldBlock)
-        }
-    }
-}
-
-impl<Uart: Instance> embedded_io::Read for Rx<Uart> {
-    fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
-        if buf.is_empty() {
-            return Ok(0);
-        }
-
-        for byte in buf.iter_mut() {
-            let w = nb::block!(<Self as embedded_hal_nb::serial::Read<u8>>::read(self))?;
-            *byte = w;
-        }
-
-        Ok(buf.len())
-    }
-}
-
-impl<Uart> embedded_io::ErrorType for Tx<Uart> {
-    type Error = Error;
-}
-
-impl<Uart> embedded_hal_nb::serial::ErrorType for Tx<Uart> {
-    type Error = Error;
-}
-
-impl<Uart: Instance> embedded_hal_nb::serial::Write<u8> for Tx<Uart> {
-    fn write(&mut self, word: u8) -> nb::Result<(), Self::Error> {
-        let reader = unsafe { &(*Uart::ptr()) }.txstatus().read();
-        if reader.wrrdy().bit_is_clear() {
-            return Err(nb::Error::WouldBlock);
-        } else {
-            // DPARITY bit not supported yet
-            unsafe {
-                // NOTE(unsafe) atomic write to data register
-                // NOTE(write_volatile) 8-bit write that's not
-                // possible through the svd2rust API
-                (*Uart::ptr()).data().write(|w| w.bits(word as u32));
-            }
-        }
-        Ok(())
-    }
-
-    fn flush(&mut self) -> nb::Result<(), Self::Error> {
-        // SAFETY: Only TX related registers are used.
-        let reader = unsafe { &(*Uart::ptr()) }.txstatus().read();
-        if reader.wrbusy().bit_is_set() {
-            return Err(nb::Error::WouldBlock);
-        }
-        Ok(())
-    }
-}
-
-impl<Uart: Instance> embedded_io::Write for Tx<Uart> {
-    fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error> {
-        if buf.is_empty() {
-            return Ok(0);
-        }
-
-        for byte in buf.iter() {
-            nb::block!(<Self as embedded_hal_nb::serial::Write<u8>>::write(
-                self, *byte
-            ))?;
-        }
-
-        Ok(buf.len())
-    }
-
-    fn flush(&mut self) -> Result<(), Self::Error> {
-        nb::block!(<Self as embedded_hal_nb::serial::Write<u8>>::flush(self))
-    }
-}
-
-impl<UartInstance> embedded_io::ErrorType for UartBase<UartInstance> {
-    type Error = Error;
-}
-
-impl<UartInstance> embedded_hal_nb::serial::ErrorType for UartBase<UartInstance> {
-    type Error = Error;
-}
-
-impl<Uart: Instance> embedded_hal_nb::serial::Read<u8> for UartBase<Uart> {
-    fn read(&mut self) -> nb::Result<u8, Self::Error> {
-        self.rx.read()
-    }
-}
-
-impl<Uart: Instance> embedded_hal_nb::serial::Write<u8> for UartBase<Uart> {
-    fn write(&mut self, word: u8) -> nb::Result<(), Self::Error> {
-        self.tx.write(word)
-    }
-
-    fn flush(&mut self) -> nb::Result<(), Self::Error> {
-        self.tx.flush()
-    }
-}

va416xx/CHANGELOG.md

@@ -8,6 +8,10 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
+## [v0.3.0] 2025-02-13
+
+- Re-generated PAC with `svd2rust` v0.35.0
+
 ## [v0.2.0] 2024-06-25
 
 - Re-Generated PAC with `svd2rust` v0.33.3

va416xx/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "va416xx"
-version = "0.2.0"
+version = "0.3.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "PAC for the Vorago VA416xx family of MCUs"

va416xx/gen-helper.sh

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 # Use installed tool by default
 svd2rust_bin="svd2rust"

va416xx/src/adc.rs

@@ -65,61 +65,61 @@ impl RegisterBlock {
         &self.perid
     }
 }
-#[doc = "CTRL (rw) register accessor: Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`]
+#[doc = "CTRL (rw) register accessor: Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`]
 module"]
 #[doc(alias = "CTRL")]
 pub type Ctrl = crate::Reg<ctrl::CtrlSpec>;
 #[doc = "Control Register"]
 pub mod ctrl;
-#[doc = "FIFO_DATA (r) register accessor: FIFO data\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fifo_data::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_data`]
+#[doc = "FIFO_DATA (r) register accessor: FIFO data\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_data::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_data`]
 module"]
 #[doc(alias = "FIFO_DATA")]
 pub type FifoData = crate::Reg<fifo_data::FifoDataSpec>;
 #[doc = "FIFO data"]
 pub mod fifo_data;
-#[doc = "STATUS (r) register accessor: Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
+#[doc = "STATUS (r) register accessor: Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
 module"]
 #[doc(alias = "STATUS")]
 pub type Status = crate::Reg<status::StatusSpec>;
 #[doc = "Status"]
 pub mod status;
-#[doc = "IRQ_ENB (rw) register accessor: Interrupt Enable\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`irq_enb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`irq_enb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_enb`]
+#[doc = "IRQ_ENB (rw) register accessor: Interrupt Enable\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_enb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_enb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_enb`]
 module"]
 #[doc(alias = "IRQ_ENB")]
 pub type IrqEnb = crate::Reg<irq_enb::IrqEnbSpec>;
 #[doc = "Interrupt Enable"]
 pub mod irq_enb;
-#[doc = "IRQ_RAW (r) register accessor: Raw Interrupt Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`irq_raw::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_raw`]
+#[doc = "IRQ_RAW (r) register accessor: Raw Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_raw`]
 module"]
 #[doc(alias = "IRQ_RAW")]
 pub type IrqRaw = crate::Reg<irq_raw::IrqRawSpec>;
 #[doc = "Raw Interrupt Status"]
 pub mod irq_raw;
-#[doc = "IRQ_END (r) register accessor: Enabled Interrupt Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`irq_end::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_end`]
+#[doc = "IRQ_END (r) register accessor: Enabled Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_end::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_end`]
 module"]
 #[doc(alias = "IRQ_END")]
 pub type IrqEnd = crate::Reg<irq_end::IrqEndSpec>;
 #[doc = "Enabled Interrupt Status"]
 pub mod irq_end;
-#[doc = "IRQ_CLR (w) register accessor: Clear Interrupt\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`irq_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_clr`]
+#[doc = "IRQ_CLR (w) register accessor: Clear Interrupt\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_clr`]
 module"]
 #[doc(alias = "IRQ_CLR")]
 pub type IrqClr = crate::Reg<irq_clr::IrqClrSpec>;
 #[doc = "Clear Interrupt"]
 pub mod irq_clr;
-#[doc = "RXFIFOIRQTRG (rw) register accessor: Receive FIFO Interrupt Trigger Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rxfifoirqtrg::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rxfifoirqtrg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rxfifoirqtrg`]
+#[doc = "RXFIFOIRQTRG (rw) register accessor: Receive FIFO Interrupt Trigger Value\n\nYou can [`read`](crate::Reg::read) this register and get [`rxfifoirqtrg::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rxfifoirqtrg::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rxfifoirqtrg`]
 module"]
 #[doc(alias = "RXFIFOIRQTRG")]
 pub type Rxfifoirqtrg = crate::Reg<rxfifoirqtrg::RxfifoirqtrgSpec>;
 #[doc = "Receive FIFO Interrupt Trigger Value"]
 pub mod rxfifoirqtrg;
-#[doc = "FIFO_CLR (rw) register accessor: FIFO Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fifo_clr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`fifo_clr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_clr`]
+#[doc = "FIFO_CLR (rw) register accessor: FIFO Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_clr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`fifo_clr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_clr`]
 module"]
 #[doc(alias = "FIFO_CLR")]
 pub type FifoClr = crate::Reg<fifo_clr::FifoClrSpec>;
 #[doc = "FIFO Clear"]
 pub mod fifo_clr;
-#[doc = "PERID (r) register accessor: Peripheral ID Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`perid::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@perid`]
+#[doc = "PERID (r) register accessor: Peripheral ID Register\n\nYou can [`read`](crate::Reg::read) this register and get [`perid::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@perid`]
 module"]
 #[doc(alias = "PERID")]
 pub type Perid = crate::Reg<perid::PeridSpec>;

va416xx/src/adc/ctrl.rs

@@ -61,42 +61,36 @@ impl R {
 impl W {
     #[doc = "Bits 0:15 - Enables the channel for data collection"]
     #[inline(always)]
-    #[must_use]
     pub fn chan_en(&mut self) -> ChanEnW<CtrlSpec> {
         ChanEnW::new(self, 0)
     }
     #[doc = "Bit 16 - Enables the channel tag to be saved with the ADC data"]
     #[inline(always)]
-    #[must_use]
     pub fn chan_tag_en(&mut self) -> ChanTagEnW<CtrlSpec> {
         ChanTagEnW::new(self, 16)
     }
     #[doc = "Bit 17 - ADC data acquisition for all enabled channel"]
     #[inline(always)]
-    #[must_use]
     pub fn sweep_en(&mut self) -> SweepEnW<CtrlSpec> {
         SweepEnW::new(self, 17)
     }
     #[doc = "Bit 18 - Allows the external trigger to start analog acquisition"]
     #[inline(always)]
-    #[must_use]
     pub fn ext_trig_en(&mut self) -> ExtTrigEnW<CtrlSpec> {
         ExtTrigEnW::new(self, 18)
     }
     #[doc = "Bit 19 - Starts analog acquisition"]
     #[inline(always)]
-    #[must_use]
     pub fn manual_trig(&mut self) -> ManualTrigW<CtrlSpec> {
         ManualTrigW::new(self, 19)
     }
     #[doc = "Bits 20:23 - Conversion count describes the number of conversions to be applied for triggers/sweeps. (N+1 conversions)"]
     #[inline(always)]
-    #[must_use]
     pub fn conv_cnt(&mut self) -> ConvCntW<CtrlSpec> {
         ConvCntW::new(self, 20)
     }
 }
-#[doc = "Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrl::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrl::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CtrlSpec;
 impl crate::RegisterSpec for CtrlSpec {
     type Ux = u32;

va416xx/src/adc/fifo_clr.rs

@@ -7,12 +7,11 @@ pub type FifoClrW<'a, REG> = crate::BitWriter<'a, REG>;
 impl W {
     #[doc = "Bit 0 - Clears the ADC FIFO. Always reads 0"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_clr(&mut self) -> FifoClrW<FifoClrSpec> {
         FifoClrW::new(self, 0)
     }
 }
-#[doc = "FIFO Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fifo_clr::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`fifo_clr::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "FIFO Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_clr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`fifo_clr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct FifoClrSpec;
 impl crate::RegisterSpec for FifoClrSpec {
     type Ux = u32;

va416xx/src/adc/fifo_data.rs

@@ -16,7 +16,7 @@ impl R {
         ChanTagR::new(((self.bits >> 12) & 0x0f) as u8)
     }
 }
-#[doc = "FIFO data\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`fifo_data::R`](R).  See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "FIFO data\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_data::R`](R). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct FifoDataSpec;
 impl crate::RegisterSpec for FifoDataSpec {
     type Ux = u32;

va416xx/src/adc/irq_clr.rs

@@ -11,30 +11,26 @@ pub type TrigErrorW<'a, REG> = crate::BitWriter<'a, REG>;
 impl W {
     #[doc = "Bit 0 - Clears the FIFO overflow interrupt status. Always reads 0"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_oflow(&mut self) -> FifoOflowW<IrqClrSpec> {
         FifoOflowW::new(self, 0)
     }
     #[doc = "Bit 1 - Clears the FIFO underflow interrupt status. Always reads 0"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_uflow(&mut self) -> FifoUflowW<IrqClrSpec> {
         FifoUflowW::new(self, 1)
     }
     #[doc = "Bit 2 - Clears the ADC done interrupt status. Always reads 0"]
     #[inline(always)]
-    #[must_use]
     pub fn adc_done(&mut self) -> AdcDoneW<IrqClrSpec> {
         AdcDoneW::new(self, 2)
     }
     #[doc = "Bit 3 - Clears the trigger error interrupt status. Always reads 0"]
     #[inline(always)]
-    #[must_use]
     pub fn trig_error(&mut self) -> TrigErrorW<IrqClrSpec> {
         TrigErrorW::new(self, 3)
     }
 }
-#[doc = "Clear Interrupt\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`irq_clr::W`](W). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Clear Interrupt\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_clr::W`](W). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct IrqClrSpec;
 impl crate::RegisterSpec for IrqClrSpec {
     type Ux = u32;

va416xx/src/adc/irq_enb.rs

@@ -70,48 +70,41 @@ impl R {
 impl W {
     #[doc = "Bit 0 - Enables the interrupt for FIFO empty"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_empty(&mut self) -> FifoEmptyW<IrqEnbSpec> {
         FifoEmptyW::new(self, 0)
     }
     #[doc = "Bit 1 - Enables the interrupt for FIFO full"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_full(&mut self) -> FifoFullW<IrqEnbSpec> {
         FifoFullW::new(self, 1)
     }
     #[doc = "Bit 2 - Enables the interrupt for a FIFO overflow"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_oflow(&mut self) -> FifoOflowW<IrqEnbSpec> {
         FifoOflowW::new(self, 2)
     }
     #[doc = "Bit 3 - Enables the interrupt for a FIFO underflow"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_uflow(&mut self) -> FifoUflowW<IrqEnbSpec> {
         FifoUflowW::new(self, 3)
     }
     #[doc = "Bit 4 - Enables the interrupt for an ADC data acquisition completion"]
     #[inline(always)]
-    #[must_use]
     pub fn adc_done(&mut self) -> AdcDoneW<IrqEnbSpec> {
         AdcDoneW::new(self, 4)
     }
     #[doc = "Bit 5 - Enables the interrupt for a trigger error"]
     #[inline(always)]
-    #[must_use]
     pub fn trig_error(&mut self) -> TrigErrorW<IrqEnbSpec> {
         TrigErrorW::new(self, 5)
     }
     #[doc = "Bit 6 - Enables the interrupt for the FIFO entry count meets or exceeds the trigger level"]
     #[inline(always)]
-    #[must_use]
     pub fn fifo_depth_trig(&mut self) -> FifoDepthTrigW<IrqEnbSpec> {
         FifoDepthTrigW::new(self, 6)
     }
 }
-#[doc = "Interrupt Enable\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`irq_enb::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`irq_enb::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Interrupt Enable\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_enb::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_enb::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct IrqEnbSpec;
 impl crate::RegisterSpec for IrqEnbSpec {
     type Ux = u32;

va416xx/src/adc/irq_end.rs

@@ -51,7 +51,7 @@ impl R {
         FifoDepthTrigR::new(((self.bits >> 6) & 1) != 0)
     }
 }
-#[doc = "Enabled Interrupt Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`irq_end::R`](R).  See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Enabled Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_end::R`](R). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct IrqEndSpec;
 impl crate::RegisterSpec for IrqEndSpec {
     type Ux = u32;

va416xx/src/adc/irq_raw.rs

@@ -51,7 +51,7 @@ impl R {
         FifoDepthTrigR::new(((self.bits >> 6) & 1) != 0)
     }
 }
-#[doc = "Raw Interrupt Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`irq_raw::R`](R).  See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Raw Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_raw::R`](R). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct IrqRawSpec;
 impl crate::RegisterSpec for IrqRawSpec {
     type Ux = u32;

va416xx/src/adc/perid.rs

@@ -5,7 +5,7 @@ impl core::fmt::Debug for R {
         write!(f, "{}", self.bits())
     }
 }
-#[doc = "Peripheral ID Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`perid::R`](R).  See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Peripheral ID Register\n\nYou can [`read`](crate::Reg::read) this register and get [`perid::R`](R). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct PeridSpec;
 impl crate::RegisterSpec for PeridSpec {
     type Ux = u32;

va416xx/src/adc/rxfifoirqtrg.rs

@@ -16,12 +16,11 @@ impl R {
 impl W {
     #[doc = "Bits 0:4 - Sets the FIFO_ENTRY_CNT value that asserts the FIFO_DEPTH_TRIG interrupt"]
     #[inline(always)]
-    #[must_use]
     pub fn level(&mut self) -> LevelW<RxfifoirqtrgSpec> {
         LevelW::new(self, 0)
     }
 }
-#[doc = "Receive FIFO Interrupt Trigger Value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rxfifoirqtrg::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rxfifoirqtrg::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Receive FIFO Interrupt Trigger Value\n\nYou can [`read`](crate::Reg::read) this register and get [`rxfifoirqtrg::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rxfifoirqtrg::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct RxfifoirqtrgSpec;
 impl crate::RegisterSpec for RxfifoirqtrgSpec {
     type Ux = u32;

va416xx/src/adc/status.rs

@@ -16,7 +16,7 @@ impl R {
         AdcBusyR::new(((self.bits >> 7) & 1) != 0)
     }
 }
-#[doc = "Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status::R`](R).  See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`](R). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct StatusSpec;
 impl crate::RegisterSpec for StatusSpec {
     type Ux = u32;

va416xx/src/can0.rs

@@ -856,853 +856,853 @@ impl RegisterBlock {
         &self.ctmr
     }
 }
-#[doc = "CNSTAT_CMB0 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb0`]
+#[doc = "CNSTAT_CMB0 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb0`]
 module"]
 #[doc(alias = "CNSTAT_CMB0")]
 pub type CnstatCmb0 = crate::Reg<cnstat_cmb0::CnstatCmb0Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb0;
-#[doc = "TSTP_CMB0 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb0`]
+#[doc = "TSTP_CMB0 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb0`]
 module"]
 #[doc(alias = "TSTP_CMB0")]
 pub type TstpCmb0 = crate::Reg<tstp_cmb0::TstpCmb0Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb0;
-#[doc = "DATA3_CMB0 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb0`]
+#[doc = "DATA3_CMB0 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb0`]
 module"]
 #[doc(alias = "DATA3_CMB0")]
 pub type Data3Cmb0 = crate::Reg<data3_cmb0::Data3Cmb0Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb0;
-#[doc = "DATA2_CMB0 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb0`]
+#[doc = "DATA2_CMB0 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb0`]
 module"]
 #[doc(alias = "DATA2_CMB0")]
 pub type Data2Cmb0 = crate::Reg<data2_cmb0::Data2Cmb0Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb0;
-#[doc = "DATA1_CMB0 (rw) register accessor: CAN Frame Data Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb0`]
+#[doc = "DATA1_CMB0 (rw) register accessor: CAN Frame Data Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb0`]
 module"]
 #[doc(alias = "DATA1_CMB0")]
 pub type Data1Cmb0 = crate::Reg<data1_cmb0::Data1Cmb0Spec>;
 #[doc = "CAN Frame Data Word 1"]
 pub mod data1_cmb0;
-#[doc = "DATA0_CMB0 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb0`]
+#[doc = "DATA0_CMB0 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb0`]
 module"]
 #[doc(alias = "DATA0_CMB0")]
 pub type Data0Cmb0 = crate::Reg<data0_cmb0::Data0Cmb0Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb0;
-#[doc = "ID0_CMB0 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb0`]
+#[doc = "ID0_CMB0 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb0`]
 module"]
 #[doc(alias = "ID0_CMB0")]
 pub type Id0Cmb0 = crate::Reg<id0_cmb0::Id0Cmb0Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb0;
-#[doc = "ID1_CMB0 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb0::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb0`]
+#[doc = "ID1_CMB0 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb0`]
 module"]
 #[doc(alias = "ID1_CMB0")]
 pub type Id1Cmb0 = crate::Reg<id1_cmb0::Id1Cmb0Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb0;
-#[doc = "CNSTAT_CMB1 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb1`]
+#[doc = "CNSTAT_CMB1 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb1`]
 module"]
 #[doc(alias = "CNSTAT_CMB1")]
 pub type CnstatCmb1 = crate::Reg<cnstat_cmb1::CnstatCmb1Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb1;
-#[doc = "TSTP_CMB1 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb1`]
+#[doc = "TSTP_CMB1 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb1`]
 module"]
 #[doc(alias = "TSTP_CMB1")]
 pub type TstpCmb1 = crate::Reg<tstp_cmb1::TstpCmb1Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb1;
-#[doc = "DATA3_CMB1 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb1`]
+#[doc = "DATA3_CMB1 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb1`]
 module"]
 #[doc(alias = "DATA3_CMB1")]
 pub type Data3Cmb1 = crate::Reg<data3_cmb1::Data3Cmb1Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb1;
-#[doc = "DATA2_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb1`]
+#[doc = "DATA2_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb1`]
 module"]
 #[doc(alias = "DATA2_CMB1")]
 pub type Data2Cmb1 = crate::Reg<data2_cmb1::Data2Cmb1Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb1;
-#[doc = "DATA1_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb1`]
+#[doc = "DATA1_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb1`]
 module"]
 #[doc(alias = "DATA1_CMB1")]
 pub type Data1Cmb1 = crate::Reg<data1_cmb1::Data1Cmb1Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb1;
-#[doc = "DATA0_CMB1 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb1`]
+#[doc = "DATA0_CMB1 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb1`]
 module"]
 #[doc(alias = "DATA0_CMB1")]
 pub type Data0Cmb1 = crate::Reg<data0_cmb1::Data0Cmb1Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb1;
-#[doc = "ID0_CMB1 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb1`]
+#[doc = "ID0_CMB1 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb1`]
 module"]
 #[doc(alias = "ID0_CMB1")]
 pub type Id0Cmb1 = crate::Reg<id0_cmb1::Id0Cmb1Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb1;
-#[doc = "ID1_CMB1 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb1::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb1`]
+#[doc = "ID1_CMB1 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb1`]
 module"]
 #[doc(alias = "ID1_CMB1")]
 pub type Id1Cmb1 = crate::Reg<id1_cmb1::Id1Cmb1Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb1;
-#[doc = "CNSTAT_CMB2 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb2`]
+#[doc = "CNSTAT_CMB2 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb2`]
 module"]
 #[doc(alias = "CNSTAT_CMB2")]
 pub type CnstatCmb2 = crate::Reg<cnstat_cmb2::CnstatCmb2Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb2;
-#[doc = "TSTP_CMB2 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb2`]
+#[doc = "TSTP_CMB2 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb2`]
 module"]
 #[doc(alias = "TSTP_CMB2")]
 pub type TstpCmb2 = crate::Reg<tstp_cmb2::TstpCmb2Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb2;
-#[doc = "DATA3_CMB2 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb2`]
+#[doc = "DATA3_CMB2 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb2`]
 module"]
 #[doc(alias = "DATA3_CMB2")]
 pub type Data3Cmb2 = crate::Reg<data3_cmb2::Data3Cmb2Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb2;
-#[doc = "DATA2_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb2`]
+#[doc = "DATA2_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb2`]
 module"]
 #[doc(alias = "DATA2_CMB2")]
 pub type Data2Cmb2 = crate::Reg<data2_cmb2::Data2Cmb2Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb2;
-#[doc = "DATA1_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb2`]
+#[doc = "DATA1_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb2`]
 module"]
 #[doc(alias = "DATA1_CMB2")]
 pub type Data1Cmb2 = crate::Reg<data1_cmb2::Data1Cmb2Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb2;
-#[doc = "DATA0_CMB2 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb2`]
+#[doc = "DATA0_CMB2 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb2`]
 module"]
 #[doc(alias = "DATA0_CMB2")]
 pub type Data0Cmb2 = crate::Reg<data0_cmb2::Data0Cmb2Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb2;
-#[doc = "ID0_CMB2 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb2`]
+#[doc = "ID0_CMB2 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb2`]
 module"]
 #[doc(alias = "ID0_CMB2")]
 pub type Id0Cmb2 = crate::Reg<id0_cmb2::Id0Cmb2Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb2;
-#[doc = "ID1_CMB2 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb2::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb2::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb2`]
+#[doc = "ID1_CMB2 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb2`]
 module"]
 #[doc(alias = "ID1_CMB2")]
 pub type Id1Cmb2 = crate::Reg<id1_cmb2::Id1Cmb2Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb2;
-#[doc = "CNSTAT_CMB3 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb3`]
+#[doc = "CNSTAT_CMB3 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb3`]
 module"]
 #[doc(alias = "CNSTAT_CMB3")]
 pub type CnstatCmb3 = crate::Reg<cnstat_cmb3::CnstatCmb3Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb3;
-#[doc = "TSTP_CMB3 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb3`]
+#[doc = "TSTP_CMB3 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb3`]
 module"]
 #[doc(alias = "TSTP_CMB3")]
 pub type TstpCmb3 = crate::Reg<tstp_cmb3::TstpCmb3Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb3;
-#[doc = "DATA3_CMB3 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb3`]
+#[doc = "DATA3_CMB3 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb3`]
 module"]
 #[doc(alias = "DATA3_CMB3")]
 pub type Data3Cmb3 = crate::Reg<data3_cmb3::Data3Cmb3Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb3;
-#[doc = "DATA2_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb3`]
+#[doc = "DATA2_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb3`]
 module"]
 #[doc(alias = "DATA2_CMB3")]
 pub type Data2Cmb3 = crate::Reg<data2_cmb3::Data2Cmb3Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb3;
-#[doc = "DATA1_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb3`]
+#[doc = "DATA1_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb3`]
 module"]
 #[doc(alias = "DATA1_CMB3")]
 pub type Data1Cmb3 = crate::Reg<data1_cmb3::Data1Cmb3Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb3;
-#[doc = "DATA0_CMB3 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb3`]
+#[doc = "DATA0_CMB3 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb3`]
 module"]
 #[doc(alias = "DATA0_CMB3")]
 pub type Data0Cmb3 = crate::Reg<data0_cmb3::Data0Cmb3Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb3;
-#[doc = "ID0_CMB3 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb3`]
+#[doc = "ID0_CMB3 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb3`]
 module"]
 #[doc(alias = "ID0_CMB3")]
 pub type Id0Cmb3 = crate::Reg<id0_cmb3::Id0Cmb3Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb3;
-#[doc = "ID1_CMB3 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb3::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb3::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb3`]
+#[doc = "ID1_CMB3 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb3`]
 module"]
 #[doc(alias = "ID1_CMB3")]
 pub type Id1Cmb3 = crate::Reg<id1_cmb3::Id1Cmb3Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb3;
-#[doc = "CNSTAT_CMB4 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb4`]
+#[doc = "CNSTAT_CMB4 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb4`]
 module"]
 #[doc(alias = "CNSTAT_CMB4")]
 pub type CnstatCmb4 = crate::Reg<cnstat_cmb4::CnstatCmb4Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb4;
-#[doc = "TSTP_CMB4 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb4`]
+#[doc = "TSTP_CMB4 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb4`]
 module"]
 #[doc(alias = "TSTP_CMB4")]
 pub type TstpCmb4 = crate::Reg<tstp_cmb4::TstpCmb4Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb4;
-#[doc = "DATA3_CMB4 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb4`]
+#[doc = "DATA3_CMB4 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb4`]
 module"]
 #[doc(alias = "DATA3_CMB4")]
 pub type Data3Cmb4 = crate::Reg<data3_cmb4::Data3Cmb4Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb4;
-#[doc = "DATA2_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb4`]
+#[doc = "DATA2_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb4`]
 module"]
 #[doc(alias = "DATA2_CMB4")]
 pub type Data2Cmb4 = crate::Reg<data2_cmb4::Data2Cmb4Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb4;
-#[doc = "DATA1_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb4`]
+#[doc = "DATA1_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb4`]
 module"]
 #[doc(alias = "DATA1_CMB4")]
 pub type Data1Cmb4 = crate::Reg<data1_cmb4::Data1Cmb4Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb4;
-#[doc = "DATA0_CMB4 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb4`]
+#[doc = "DATA0_CMB4 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb4`]
 module"]
 #[doc(alias = "DATA0_CMB4")]
 pub type Data0Cmb4 = crate::Reg<data0_cmb4::Data0Cmb4Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb4;
-#[doc = "ID0_CMB4 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb4`]
+#[doc = "ID0_CMB4 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb4`]
 module"]
 #[doc(alias = "ID0_CMB4")]
 pub type Id0Cmb4 = crate::Reg<id0_cmb4::Id0Cmb4Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb4;
-#[doc = "ID1_CMB4 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb4::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb4::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb4`]
+#[doc = "ID1_CMB4 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb4`]
 module"]
 #[doc(alias = "ID1_CMB4")]
 pub type Id1Cmb4 = crate::Reg<id1_cmb4::Id1Cmb4Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb4;
-#[doc = "CNSTAT_CMB5 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb5`]
+#[doc = "CNSTAT_CMB5 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb5`]
 module"]
 #[doc(alias = "CNSTAT_CMB5")]
 pub type CnstatCmb5 = crate::Reg<cnstat_cmb5::CnstatCmb5Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb5;
-#[doc = "TSTP_CMB5 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb5`]
+#[doc = "TSTP_CMB5 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb5`]
 module"]
 #[doc(alias = "TSTP_CMB5")]
 pub type TstpCmb5 = crate::Reg<tstp_cmb5::TstpCmb5Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb5;
-#[doc = "DATA3_CMB5 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb5`]
+#[doc = "DATA3_CMB5 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb5`]
 module"]
 #[doc(alias = "DATA3_CMB5")]
 pub type Data3Cmb5 = crate::Reg<data3_cmb5::Data3Cmb5Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb5;
-#[doc = "DATA2_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb5`]
+#[doc = "DATA2_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb5`]
 module"]
 #[doc(alias = "DATA2_CMB5")]
 pub type Data2Cmb5 = crate::Reg<data2_cmb5::Data2Cmb5Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb5;
-#[doc = "DATA1_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb5`]
+#[doc = "DATA1_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb5`]
 module"]
 #[doc(alias = "DATA1_CMB5")]
 pub type Data1Cmb5 = crate::Reg<data1_cmb5::Data1Cmb5Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb5;
-#[doc = "DATA0_CMB5 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb5`]
+#[doc = "DATA0_CMB5 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb5`]
 module"]
 #[doc(alias = "DATA0_CMB5")]
 pub type Data0Cmb5 = crate::Reg<data0_cmb5::Data0Cmb5Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb5;
-#[doc = "ID0_CMB5 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb5`]
+#[doc = "ID0_CMB5 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb5`]
 module"]
 #[doc(alias = "ID0_CMB5")]
 pub type Id0Cmb5 = crate::Reg<id0_cmb5::Id0Cmb5Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb5;
-#[doc = "ID1_CMB5 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb5::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb5::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb5`]
+#[doc = "ID1_CMB5 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb5`]
 module"]
 #[doc(alias = "ID1_CMB5")]
 pub type Id1Cmb5 = crate::Reg<id1_cmb5::Id1Cmb5Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb5;
-#[doc = "CNSTAT_CMB6 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb6`]
+#[doc = "CNSTAT_CMB6 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb6`]
 module"]
 #[doc(alias = "CNSTAT_CMB6")]
 pub type CnstatCmb6 = crate::Reg<cnstat_cmb6::CnstatCmb6Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb6;
-#[doc = "TSTP_CMB6 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb6`]
+#[doc = "TSTP_CMB6 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb6`]
 module"]
 #[doc(alias = "TSTP_CMB6")]
 pub type TstpCmb6 = crate::Reg<tstp_cmb6::TstpCmb6Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb6;
-#[doc = "DATA3_CMB6 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb6`]
+#[doc = "DATA3_CMB6 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb6`]
 module"]
 #[doc(alias = "DATA3_CMB6")]
 pub type Data3Cmb6 = crate::Reg<data3_cmb6::Data3Cmb6Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb6;
-#[doc = "DATA2_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb6`]
+#[doc = "DATA2_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb6`]
 module"]
 #[doc(alias = "DATA2_CMB6")]
 pub type Data2Cmb6 = crate::Reg<data2_cmb6::Data2Cmb6Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb6;
-#[doc = "DATA1_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb6`]
+#[doc = "DATA1_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb6`]
 module"]
 #[doc(alias = "DATA1_CMB6")]
 pub type Data1Cmb6 = crate::Reg<data1_cmb6::Data1Cmb6Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb6;
-#[doc = "DATA0_CMB6 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb6`]
+#[doc = "DATA0_CMB6 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb6`]
 module"]
 #[doc(alias = "DATA0_CMB6")]
 pub type Data0Cmb6 = crate::Reg<data0_cmb6::Data0Cmb6Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb6;
-#[doc = "ID0_CMB6 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb6`]
+#[doc = "ID0_CMB6 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb6`]
 module"]
 #[doc(alias = "ID0_CMB6")]
 pub type Id0Cmb6 = crate::Reg<id0_cmb6::Id0Cmb6Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb6;
-#[doc = "ID1_CMB6 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb6::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb6::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb6`]
+#[doc = "ID1_CMB6 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb6`]
 module"]
 #[doc(alias = "ID1_CMB6")]
 pub type Id1Cmb6 = crate::Reg<id1_cmb6::Id1Cmb6Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb6;
-#[doc = "CNSTAT_CMB7 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb7`]
+#[doc = "CNSTAT_CMB7 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb7`]
 module"]
 #[doc(alias = "CNSTAT_CMB7")]
 pub type CnstatCmb7 = crate::Reg<cnstat_cmb7::CnstatCmb7Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb7;
-#[doc = "TSTP_CMB7 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb7`]
+#[doc = "TSTP_CMB7 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb7`]
 module"]
 #[doc(alias = "TSTP_CMB7")]
 pub type TstpCmb7 = crate::Reg<tstp_cmb7::TstpCmb7Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb7;
-#[doc = "DATA3_CMB7 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb7`]
+#[doc = "DATA3_CMB7 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb7`]
 module"]
 #[doc(alias = "DATA3_CMB7")]
 pub type Data3Cmb7 = crate::Reg<data3_cmb7::Data3Cmb7Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb7;
-#[doc = "DATA2_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb7`]
+#[doc = "DATA2_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb7`]
 module"]
 #[doc(alias = "DATA2_CMB7")]
 pub type Data2Cmb7 = crate::Reg<data2_cmb7::Data2Cmb7Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb7;
-#[doc = "DATA1_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb7`]
+#[doc = "DATA1_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb7`]
 module"]
 #[doc(alias = "DATA1_CMB7")]
 pub type Data1Cmb7 = crate::Reg<data1_cmb7::Data1Cmb7Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb7;
-#[doc = "DATA0_CMB7 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb7`]
+#[doc = "DATA0_CMB7 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb7`]
 module"]
 #[doc(alias = "DATA0_CMB7")]
 pub type Data0Cmb7 = crate::Reg<data0_cmb7::Data0Cmb7Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb7;
-#[doc = "ID0_CMB7 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb7`]
+#[doc = "ID0_CMB7 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb7`]
 module"]
 #[doc(alias = "ID0_CMB7")]
 pub type Id0Cmb7 = crate::Reg<id0_cmb7::Id0Cmb7Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb7;
-#[doc = "ID1_CMB7 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb7::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb7::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb7`]
+#[doc = "ID1_CMB7 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb7`]
 module"]
 #[doc(alias = "ID1_CMB7")]
 pub type Id1Cmb7 = crate::Reg<id1_cmb7::Id1Cmb7Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb7;
-#[doc = "CNSTAT_CMB8 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb8`]
+#[doc = "CNSTAT_CMB8 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb8`]
 module"]
 #[doc(alias = "CNSTAT_CMB8")]
 pub type CnstatCmb8 = crate::Reg<cnstat_cmb8::CnstatCmb8Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb8;
-#[doc = "TSTP_CMB8 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb8`]
+#[doc = "TSTP_CMB8 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb8`]
 module"]
 #[doc(alias = "TSTP_CMB8")]
 pub type TstpCmb8 = crate::Reg<tstp_cmb8::TstpCmb8Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb8;
-#[doc = "DATA3_CMB8 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb8`]
+#[doc = "DATA3_CMB8 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb8`]
 module"]
 #[doc(alias = "DATA3_CMB8")]
 pub type Data3Cmb8 = crate::Reg<data3_cmb8::Data3Cmb8Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb8;
-#[doc = "DATA2_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb8`]
+#[doc = "DATA2_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb8`]
 module"]
 #[doc(alias = "DATA2_CMB8")]
 pub type Data2Cmb8 = crate::Reg<data2_cmb8::Data2Cmb8Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb8;
-#[doc = "DATA1_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb8`]
+#[doc = "DATA1_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb8`]
 module"]
 #[doc(alias = "DATA1_CMB8")]
 pub type Data1Cmb8 = crate::Reg<data1_cmb8::Data1Cmb8Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb8;
-#[doc = "DATA0_CMB8 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb8`]
+#[doc = "DATA0_CMB8 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb8`]
 module"]
 #[doc(alias = "DATA0_CMB8")]
 pub type Data0Cmb8 = crate::Reg<data0_cmb8::Data0Cmb8Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb8;
-#[doc = "ID0_CMB8 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb8`]
+#[doc = "ID0_CMB8 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb8`]
 module"]
 #[doc(alias = "ID0_CMB8")]
 pub type Id0Cmb8 = crate::Reg<id0_cmb8::Id0Cmb8Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb8;
-#[doc = "ID1_CMB8 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb8::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb8::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb8`]
+#[doc = "ID1_CMB8 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb8`]
 module"]
 #[doc(alias = "ID1_CMB8")]
 pub type Id1Cmb8 = crate::Reg<id1_cmb8::Id1Cmb8Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb8;
-#[doc = "CNSTAT_CMB9 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb9`]
+#[doc = "CNSTAT_CMB9 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb9`]
 module"]
 #[doc(alias = "CNSTAT_CMB9")]
 pub type CnstatCmb9 = crate::Reg<cnstat_cmb9::CnstatCmb9Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb9;
-#[doc = "TSTP_CMB9 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb9`]
+#[doc = "TSTP_CMB9 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb9`]
 module"]
 #[doc(alias = "TSTP_CMB9")]
 pub type TstpCmb9 = crate::Reg<tstp_cmb9::TstpCmb9Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb9;
-#[doc = "DATA3_CMB9 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb9`]
+#[doc = "DATA3_CMB9 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb9`]
 module"]
 #[doc(alias = "DATA3_CMB9")]
 pub type Data3Cmb9 = crate::Reg<data3_cmb9::Data3Cmb9Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb9;
-#[doc = "DATA2_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb9`]
+#[doc = "DATA2_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb9`]
 module"]
 #[doc(alias = "DATA2_CMB9")]
 pub type Data2Cmb9 = crate::Reg<data2_cmb9::Data2Cmb9Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb9;
-#[doc = "DATA1_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb9`]
+#[doc = "DATA1_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb9`]
 module"]
 #[doc(alias = "DATA1_CMB9")]
 pub type Data1Cmb9 = crate::Reg<data1_cmb9::Data1Cmb9Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb9;
-#[doc = "DATA0_CMB9 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb9`]
+#[doc = "DATA0_CMB9 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb9`]
 module"]
 #[doc(alias = "DATA0_CMB9")]
 pub type Data0Cmb9 = crate::Reg<data0_cmb9::Data0Cmb9Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb9;
-#[doc = "ID0_CMB9 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb9`]
+#[doc = "ID0_CMB9 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb9`]
 module"]
 #[doc(alias = "ID0_CMB9")]
 pub type Id0Cmb9 = crate::Reg<id0_cmb9::Id0Cmb9Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb9;
-#[doc = "ID1_CMB9 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb9::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb9::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb9`]
+#[doc = "ID1_CMB9 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb9`]
 module"]
 #[doc(alias = "ID1_CMB9")]
 pub type Id1Cmb9 = crate::Reg<id1_cmb9::Id1Cmb9Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb9;
-#[doc = "CNSTAT_CMB10 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb10`]
+#[doc = "CNSTAT_CMB10 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb10`]
 module"]
 #[doc(alias = "CNSTAT_CMB10")]
 pub type CnstatCmb10 = crate::Reg<cnstat_cmb10::CnstatCmb10Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb10;
-#[doc = "TSTP_CMB10 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb10`]
+#[doc = "TSTP_CMB10 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb10`]
 module"]
 #[doc(alias = "TSTP_CMB10")]
 pub type TstpCmb10 = crate::Reg<tstp_cmb10::TstpCmb10Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb10;
-#[doc = "DATA3_CMB10 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb10`]
+#[doc = "DATA3_CMB10 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb10`]
 module"]
 #[doc(alias = "DATA3_CMB10")]
 pub type Data3Cmb10 = crate::Reg<data3_cmb10::Data3Cmb10Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb10;
-#[doc = "DATA2_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb10`]
+#[doc = "DATA2_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb10`]
 module"]
 #[doc(alias = "DATA2_CMB10")]
 pub type Data2Cmb10 = crate::Reg<data2_cmb10::Data2Cmb10Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb10;
-#[doc = "DATA1_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb10`]
+#[doc = "DATA1_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb10`]
 module"]
 #[doc(alias = "DATA1_CMB10")]
 pub type Data1Cmb10 = crate::Reg<data1_cmb10::Data1Cmb10Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb10;
-#[doc = "DATA0_CMB10 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb10`]
+#[doc = "DATA0_CMB10 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb10`]
 module"]
 #[doc(alias = "DATA0_CMB10")]
 pub type Data0Cmb10 = crate::Reg<data0_cmb10::Data0Cmb10Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb10;
-#[doc = "ID0_CMB10 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb10`]
+#[doc = "ID0_CMB10 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb10`]
 module"]
 #[doc(alias = "ID0_CMB10")]
 pub type Id0Cmb10 = crate::Reg<id0_cmb10::Id0Cmb10Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb10;
-#[doc = "ID1_CMB10 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb10::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb10::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb10`]
+#[doc = "ID1_CMB10 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb10`]
 module"]
 #[doc(alias = "ID1_CMB10")]
 pub type Id1Cmb10 = crate::Reg<id1_cmb10::Id1Cmb10Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb10;
-#[doc = "CNSTAT_CMB11 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb11`]
+#[doc = "CNSTAT_CMB11 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb11`]
 module"]
 #[doc(alias = "CNSTAT_CMB11")]
 pub type CnstatCmb11 = crate::Reg<cnstat_cmb11::CnstatCmb11Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb11;
-#[doc = "TSTP_CMB11 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb11`]
+#[doc = "TSTP_CMB11 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb11`]
 module"]
 #[doc(alias = "TSTP_CMB11")]
 pub type TstpCmb11 = crate::Reg<tstp_cmb11::TstpCmb11Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb11;
-#[doc = "DATA3_CMB11 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb11`]
+#[doc = "DATA3_CMB11 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb11`]
 module"]
 #[doc(alias = "DATA3_CMB11")]
 pub type Data3Cmb11 = crate::Reg<data3_cmb11::Data3Cmb11Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb11;
-#[doc = "DATA2_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb11`]
+#[doc = "DATA2_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb11`]
 module"]
 #[doc(alias = "DATA2_CMB11")]
 pub type Data2Cmb11 = crate::Reg<data2_cmb11::Data2Cmb11Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb11;
-#[doc = "DATA1_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb11`]
+#[doc = "DATA1_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb11`]
 module"]
 #[doc(alias = "DATA1_CMB11")]
 pub type Data1Cmb11 = crate::Reg<data1_cmb11::Data1Cmb11Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb11;
-#[doc = "DATA0_CMB11 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb11`]
+#[doc = "DATA0_CMB11 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb11`]
 module"]
 #[doc(alias = "DATA0_CMB11")]
 pub type Data0Cmb11 = crate::Reg<data0_cmb11::Data0Cmb11Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb11;
-#[doc = "ID0_CMB11 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb11`]
+#[doc = "ID0_CMB11 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb11`]
 module"]
 #[doc(alias = "ID0_CMB11")]
 pub type Id0Cmb11 = crate::Reg<id0_cmb11::Id0Cmb11Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb11;
-#[doc = "ID1_CMB11 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb11::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb11::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb11`]
+#[doc = "ID1_CMB11 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb11`]
 module"]
 #[doc(alias = "ID1_CMB11")]
 pub type Id1Cmb11 = crate::Reg<id1_cmb11::Id1Cmb11Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb11;
-#[doc = "CNSTAT_CMB12 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb12`]
+#[doc = "CNSTAT_CMB12 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb12`]
 module"]
 #[doc(alias = "CNSTAT_CMB12")]
 pub type CnstatCmb12 = crate::Reg<cnstat_cmb12::CnstatCmb12Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb12;
-#[doc = "TSTP_CMB12 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb12`]
+#[doc = "TSTP_CMB12 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb12`]
 module"]
 #[doc(alias = "TSTP_CMB12")]
 pub type TstpCmb12 = crate::Reg<tstp_cmb12::TstpCmb12Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb12;
-#[doc = "DATA3_CMB12 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb12`]
+#[doc = "DATA3_CMB12 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb12`]
 module"]
 #[doc(alias = "DATA3_CMB12")]
 pub type Data3Cmb12 = crate::Reg<data3_cmb12::Data3Cmb12Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb12;
-#[doc = "DATA2_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb12`]
+#[doc = "DATA2_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb12`]
 module"]
 #[doc(alias = "DATA2_CMB12")]
 pub type Data2Cmb12 = crate::Reg<data2_cmb12::Data2Cmb12Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb12;
-#[doc = "DATA1_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb12`]
+#[doc = "DATA1_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb12`]
 module"]
 #[doc(alias = "DATA1_CMB12")]
 pub type Data1Cmb12 = crate::Reg<data1_cmb12::Data1Cmb12Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb12;
-#[doc = "DATA0_CMB12 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb12`]
+#[doc = "DATA0_CMB12 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb12`]
 module"]
 #[doc(alias = "DATA0_CMB12")]
 pub type Data0Cmb12 = crate::Reg<data0_cmb12::Data0Cmb12Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb12;
-#[doc = "ID0_CMB12 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb12`]
+#[doc = "ID0_CMB12 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb12`]
 module"]
 #[doc(alias = "ID0_CMB12")]
 pub type Id0Cmb12 = crate::Reg<id0_cmb12::Id0Cmb12Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb12;
-#[doc = "ID1_CMB12 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb12::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb12::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb12`]
+#[doc = "ID1_CMB12 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb12`]
 module"]
 #[doc(alias = "ID1_CMB12")]
 pub type Id1Cmb12 = crate::Reg<id1_cmb12::Id1Cmb12Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb12;
-#[doc = "CNSTAT_CMB13 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb13`]
+#[doc = "CNSTAT_CMB13 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb13`]
 module"]
 #[doc(alias = "CNSTAT_CMB13")]
 pub type CnstatCmb13 = crate::Reg<cnstat_cmb13::CnstatCmb13Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb13;
-#[doc = "TSTP_CMB13 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb13`]
+#[doc = "TSTP_CMB13 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb13`]
 module"]
 #[doc(alias = "TSTP_CMB13")]
 pub type TstpCmb13 = crate::Reg<tstp_cmb13::TstpCmb13Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb13;
-#[doc = "DATA3_CMB13 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb13`]
+#[doc = "DATA3_CMB13 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb13`]
 module"]
 #[doc(alias = "DATA3_CMB13")]
 pub type Data3Cmb13 = crate::Reg<data3_cmb13::Data3Cmb13Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb13;
-#[doc = "DATA2_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb13`]
+#[doc = "DATA2_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb13`]
 module"]
 #[doc(alias = "DATA2_CMB13")]
 pub type Data2Cmb13 = crate::Reg<data2_cmb13::Data2Cmb13Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb13;
-#[doc = "DATA1_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb13`]
+#[doc = "DATA1_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb13`]
 module"]
 #[doc(alias = "DATA1_CMB13")]
 pub type Data1Cmb13 = crate::Reg<data1_cmb13::Data1Cmb13Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb13;
-#[doc = "DATA0_CMB13 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb13`]
+#[doc = "DATA0_CMB13 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb13`]
 module"]
 #[doc(alias = "DATA0_CMB13")]
 pub type Data0Cmb13 = crate::Reg<data0_cmb13::Data0Cmb13Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb13;
-#[doc = "ID0_CMB13 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb13`]
+#[doc = "ID0_CMB13 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb13`]
 module"]
 #[doc(alias = "ID0_CMB13")]
 pub type Id0Cmb13 = crate::Reg<id0_cmb13::Id0Cmb13Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb13;
-#[doc = "ID1_CMB13 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb13::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb13::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb13`]
+#[doc = "ID1_CMB13 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb13`]
 module"]
 #[doc(alias = "ID1_CMB13")]
 pub type Id1Cmb13 = crate::Reg<id1_cmb13::Id1Cmb13Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb13;
-#[doc = "CNSTAT_CMB14 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb14`]
+#[doc = "CNSTAT_CMB14 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb14`]
 module"]
 #[doc(alias = "CNSTAT_CMB14")]
 pub type CnstatCmb14 = crate::Reg<cnstat_cmb14::CnstatCmb14Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb14;
-#[doc = "TSTP_CMB14 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb14`]
+#[doc = "TSTP_CMB14 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb14`]
 module"]
 #[doc(alias = "TSTP_CMB14")]
 pub type TstpCmb14 = crate::Reg<tstp_cmb14::TstpCmb14Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb14;
-#[doc = "DATA3_CMB14 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb14`]
+#[doc = "DATA3_CMB14 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb14`]
 module"]
 #[doc(alias = "DATA3_CMB14")]
 pub type Data3Cmb14 = crate::Reg<data3_cmb14::Data3Cmb14Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb14;
-#[doc = "DATA2_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb14`]
+#[doc = "DATA2_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb14`]
 module"]
 #[doc(alias = "DATA2_CMB14")]
 pub type Data2Cmb14 = crate::Reg<data2_cmb14::Data2Cmb14Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb14;
-#[doc = "DATA1_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb14`]
+#[doc = "DATA1_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb14`]
 module"]
 #[doc(alias = "DATA1_CMB14")]
 pub type Data1Cmb14 = crate::Reg<data1_cmb14::Data1Cmb14Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb14;
-#[doc = "DATA0_CMB14 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb14`]
+#[doc = "DATA0_CMB14 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb14`]
 module"]
 #[doc(alias = "DATA0_CMB14")]
 pub type Data0Cmb14 = crate::Reg<data0_cmb14::Data0Cmb14Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb14;
-#[doc = "ID0_CMB14 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb14`]
+#[doc = "ID0_CMB14 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb14`]
 module"]
 #[doc(alias = "ID0_CMB14")]
 pub type Id0Cmb14 = crate::Reg<id0_cmb14::Id0Cmb14Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb14;
-#[doc = "ID1_CMB14 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_cmb14::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_cmb14::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb14`]
+#[doc = "ID1_CMB14 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb14`]
 module"]
 #[doc(alias = "ID1_CMB14")]
 pub type Id1Cmb14 = crate::Reg<id1_cmb14::Id1Cmb14Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb14;
-#[doc = "CNSTAT_HCMB (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_hcmb`]
+#[doc = "CNSTAT_HCMB (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_hcmb`]
 module"]
 #[doc(alias = "CNSTAT_HCMB")]
 pub type CnstatHcmb = crate::Reg<cnstat_hcmb::CnstatHcmbSpec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_hcmb;
-#[doc = "TSTP_HCMB (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`tstp_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`tstp_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_hcmb`]
+#[doc = "TSTP_HCMB (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_hcmb`]
 module"]
 #[doc(alias = "TSTP_HCMB")]
 pub type TstpHcmb = crate::Reg<tstp_hcmb::TstpHcmbSpec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_hcmb;
-#[doc = "DATA3_HCMB (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data3_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data3_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_hcmb`]
+#[doc = "DATA3_HCMB (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_hcmb`]
 module"]
 #[doc(alias = "DATA3_HCMB")]
 pub type Data3Hcmb = crate::Reg<data3_hcmb::Data3HcmbSpec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_hcmb;
-#[doc = "DATA2_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_hcmb`]
+#[doc = "DATA2_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_hcmb`]
 module"]
 #[doc(alias = "DATA2_HCMB")]
 pub type Data2Hcmb = crate::Reg<data2_hcmb::Data2HcmbSpec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_hcmb;
-#[doc = "DATA1_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_hcmb`]
+#[doc = "DATA1_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_hcmb`]
 module"]
 #[doc(alias = "DATA1_HCMB")]
 pub type Data1Hcmb = crate::Reg<data1_hcmb::Data1HcmbSpec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_hcmb;
-#[doc = "DATA0_HCMB (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_hcmb`]
+#[doc = "DATA0_HCMB (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_hcmb`]
 module"]
 #[doc(alias = "DATA0_HCMB")]
 pub type Data0Hcmb = crate::Reg<data0_hcmb::Data0HcmbSpec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_hcmb;
-#[doc = "ID0_HCMB (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id0_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id0_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_hcmb`]
+#[doc = "ID0_HCMB (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_hcmb`]
 module"]
 #[doc(alias = "ID0_HCMB")]
 pub type Id0Hcmb = crate::Reg<id0_hcmb::Id0HcmbSpec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_hcmb;
-#[doc = "ID1_HCMB (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`id1_hcmb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`id1_hcmb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_hcmb`]
+#[doc = "ID1_HCMB (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_hcmb`]
 module"]
 #[doc(alias = "ID1_HCMB")]
 pub type Id1Hcmb = crate::Reg<id1_hcmb::Id1HcmbSpec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_hcmb;
-#[doc = "CGCR (rw) register accessor: CAN Global Configuration Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cgcr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cgcr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cgcr`]
+#[doc = "CGCR (rw) register accessor: CAN Global Configuration Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cgcr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cgcr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cgcr`]
 module"]
 #[doc(alias = "CGCR")]
 pub type Cgcr = crate::Reg<cgcr::CgcrSpec>;
 #[doc = "CAN Global Configuration Register"]
 pub mod cgcr;
-#[doc = "CTIM (rw) register accessor: CAN Timing Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctim::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctim::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctim`]
+#[doc = "CTIM (rw) register accessor: CAN Timing Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctim::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctim::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctim`]
 module"]
 #[doc(alias = "CTIM")]
 pub type Ctim = crate::Reg<ctim::CtimSpec>;
 #[doc = "CAN Timing Register"]
 pub mod ctim;
-#[doc = "GMSKX (rw) register accessor: CAN Global Mask Extension\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gmskx::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gmskx::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskx`]
+#[doc = "GMSKX (rw) register accessor: CAN Global Mask Extension\n\nYou can [`read`](crate::Reg::read) this register and get [`gmskx::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`gmskx::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskx`]
 module"]
 #[doc(alias = "GMSKX")]
 pub type Gmskx = crate::Reg<gmskx::GmskxSpec>;
 #[doc = "CAN Global Mask Extension"]
 pub mod gmskx;
-#[doc = "GMSKB (rw) register accessor: CAN Global Mask Base\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gmskb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gmskb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskb`]
+#[doc = "GMSKB (rw) register accessor: CAN Global Mask Base\n\nYou can [`read`](crate::Reg::read) this register and get [`gmskb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`gmskb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskb`]
 module"]
 #[doc(alias = "GMSKB")]
 pub type Gmskb = crate::Reg<gmskb::GmskbSpec>;
 #[doc = "CAN Global Mask Base"]
 pub mod gmskb;
-#[doc = "BMSKX (rw) register accessor: CAN Basic Mask Extension\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`bmskx::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`bmskx::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskx`]
+#[doc = "BMSKX (rw) register accessor: CAN Basic Mask Extension\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskx::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskx::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskx`]
 module"]
 #[doc(alias = "BMSKX")]
 pub type Bmskx = crate::Reg<bmskx::BmskxSpec>;
 #[doc = "CAN Basic Mask Extension"]
 pub mod bmskx;
-#[doc = "BMSKB (rw) register accessor: CAN Basic Mask Base\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`bmskb::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`bmskb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskb`]
+#[doc = "BMSKB (rw) register accessor: CAN Basic Mask Base\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskb`]
 module"]
 #[doc(alias = "BMSKB")]
 pub type Bmskb = crate::Reg<bmskb::BmskbSpec>;
 #[doc = "CAN Basic Mask Base"]
 pub mod bmskb;
-#[doc = "CIEN (rw) register accessor: CAN Interrupt Enable Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cien::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cien::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cien`]
+#[doc = "CIEN (rw) register accessor: CAN Interrupt Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cien::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cien::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cien`]
 module"]
 #[doc(alias = "CIEN")]
 pub type Cien = crate::Reg<cien::CienSpec>;
 #[doc = "CAN Interrupt Enable Register"]
 pub mod cien;
-#[doc = "CIPND (rw) register accessor: CAN Interrupt Pending Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cipnd::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cipnd::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cipnd`]
+#[doc = "CIPND (rw) register accessor: CAN Interrupt Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cipnd::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cipnd::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cipnd`]
 module"]
 #[doc(alias = "CIPND")]
 pub type Cipnd = crate::Reg<cipnd::CipndSpec>;
 #[doc = "CAN Interrupt Pending Register"]
 pub mod cipnd;
-#[doc = "CICLR (rw) register accessor: CAN Interrupt Clear Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ciclr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ciclr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ciclr`]
+#[doc = "CICLR (rw) register accessor: CAN Interrupt Clear Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ciclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ciclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ciclr`]
 module"]
 #[doc(alias = "CICLR")]
 pub type Ciclr = crate::Reg<ciclr::CiclrSpec>;
 #[doc = "CAN Interrupt Clear Register"]
 pub mod ciclr;
-#[doc = "CICEN (rw) register accessor: CAN Interrupt Code Enable Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cicen::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cicen::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cicen`]
+#[doc = "CICEN (rw) register accessor: CAN Interrupt Code Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cicen::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cicen::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cicen`]
 module"]
 #[doc(alias = "CICEN")]
 pub type Cicen = crate::Reg<cicen::CicenSpec>;
 #[doc = "CAN Interrupt Code Enable Register"]
 pub mod cicen;
-#[doc = "CSTPND (rw) register accessor: CAN Status Pending Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cstpnd::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cstpnd::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cstpnd`]
+#[doc = "CSTPND (rw) register accessor: CAN Status Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cstpnd::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cstpnd::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cstpnd`]
 module"]
 #[doc(alias = "CSTPND")]
 pub type Cstpnd = crate::Reg<cstpnd::CstpndSpec>;
 #[doc = "CAN Status Pending Register"]
 pub mod cstpnd;
-#[doc = "CANEC (rw) register accessor: CAN Error Counter Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`canec::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`canec::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@canec`]
+#[doc = "CANEC (rw) register accessor: CAN Error Counter Register\n\nYou can [`read`](crate::Reg::read) this register and get [`canec::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`canec::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@canec`]
 module"]
 #[doc(alias = "CANEC")]
 pub type Canec = crate::Reg<canec::CanecSpec>;
 #[doc = "CAN Error Counter Register"]
 pub mod canec;
-#[doc = "CEDIAG (rw) register accessor: CAN Error Diagnostic Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cediag::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cediag::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cediag`]
+#[doc = "CEDIAG (rw) register accessor: CAN Error Diagnostic Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cediag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cediag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cediag`]
 module"]
 #[doc(alias = "CEDIAG")]
 pub type Cediag = crate::Reg<cediag::CediagSpec>;
 #[doc = "CAN Error Diagnostic Register"]
 pub mod cediag;
-#[doc = "CTMR (rw) register accessor: CAN Timer Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctmr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctmr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctmr`]
+#[doc = "CTMR (rw) register accessor: CAN Timer Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctmr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctmr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctmr`]
 module"]
 #[doc(alias = "CTMR")]
 pub type Ctmr = crate::Reg<ctmr::CtmrSpec>;

va416xx/src/can0/bmskb.rs

@@ -60,19 +60,16 @@ impl W {
 - Unused in standard, ID\\[17:15\\]
 in extended"]
     #[inline(always)]
-    #[must_use]
     pub fn bm0(&mut self) -> Bm0W<BmskbSpec> {
         Bm0W::new(self, 0)
     }
     #[doc = "Bit 3 - Identifier Extension Bit"]
     #[inline(always)]
-    #[must_use]
     pub fn ide(&mut self) -> IdeW<BmskbSpec> {
         IdeW::new(self, 3)
     }
     #[doc = "Bit 4 - Remote Transmission Request in Standard, Substitute Remote Request (SRR) in extended"]
     #[inline(always)]
-    #[must_use]
     pub fn rtr(&mut self) -> RtrW<BmskbSpec> {
         RtrW::new(self, 4)
     }
@@ -81,12 +78,11 @@ in extended"]
 in standard, ID\\[28:18\\]
 in extended"]
     #[inline(always)]
-    #[must_use]
     pub fn bm1(&mut self) -> Bm1W<BmskbSpec> {
         Bm1W::new(self, 5)
     }
 }
-#[doc = "CAN Basic Mask Base\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`bmskb::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`bmskb::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Basic Mask Base\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskb::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskb::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct BmskbSpec;
 impl crate::RegisterSpec for BmskbSpec {
     type Ux = u32;

va416xx/src/can0/bmskx.rs

@@ -31,7 +31,6 @@ in extended, unused standard"]
 impl W {
     #[doc = "Bit 0 - Extended Remote transmission Request Bit"]
     #[inline(always)]
-    #[must_use]
     pub fn xrtr(&mut self) -> XrtrW<BmskxSpec> {
         XrtrW::new(self, 0)
     }
@@ -39,12 +38,11 @@ impl W {
 used when an extended frame is received. ID\\[14:0\\]
 in extended, unused standard"]
     #[inline(always)]
-    #[must_use]
     pub fn bm(&mut self) -> BmW<BmskxSpec> {
         BmW::new(self, 1)
     }
 }
-#[doc = "CAN Basic Mask Extension\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`bmskx::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`bmskx::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Basic Mask Extension\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskx::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskx::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct BmskxSpec;
 impl crate::RegisterSpec for BmskxSpec {
     type Ux = u32;

va416xx/src/can0/canec.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Transmit Error Counter"]
     #[inline(always)]
-    #[must_use]
     pub fn tec(&mut self) -> TecW<CanecSpec> {
         TecW::new(self, 0)
     }
     #[doc = "Bits 8:15 - Receive Error Counter"]
     #[inline(always)]
-    #[must_use]
     pub fn rec(&mut self) -> RecW<CanecSpec> {
         RecW::new(self, 8)
     }
 }
-#[doc = "CAN Error Counter Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`canec::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`canec::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Error Counter Register\n\nYou can [`read`](crate::Reg::read) this register and get [`canec::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`canec::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CanecSpec;
 impl crate::RegisterSpec for CanecSpec {
     type Ux = u32;

va416xx/src/can0/cediag.rs

@@ -70,48 +70,41 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Error Field Identifier"]
     #[inline(always)]
-    #[must_use]
     pub fn efid(&mut self) -> EfidW<CediagSpec> {
         EfidW::new(self, 0)
     }
     #[doc = "Bits 4:9 - Error Bit Identifier"]
     #[inline(always)]
-    #[must_use]
     pub fn ebid(&mut self) -> EbidW<CediagSpec> {
         EbidW::new(self, 4)
     }
     #[doc = "Bit 10 - Transmit Error"]
     #[inline(always)]
-    #[must_use]
     pub fn txe(&mut self) -> TxeW<CediagSpec> {
         TxeW::new(self, 10)
     }
     #[doc = "Bit 11 - Stuff Error"]
     #[inline(always)]
-    #[must_use]
     pub fn stuff(&mut self) -> StuffW<CediagSpec> {
         StuffW::new(self, 11)
     }
     #[doc = "Bit 12 - CRC"]
     #[inline(always)]
-    #[must_use]
     pub fn crc(&mut self) -> CrcW<CediagSpec> {
         CrcW::new(self, 12)
     }
     #[doc = "Bit 13 - Monitor"]
     #[inline(always)]
-    #[must_use]
     pub fn mon(&mut self) -> MonW<CediagSpec> {
         MonW::new(self, 13)
     }
     #[doc = "Bit 14 - Drive"]
     #[inline(always)]
-    #[must_use]
     pub fn drive(&mut self) -> DriveW<CediagSpec> {
         DriveW::new(self, 14)
     }
 }
-#[doc = "CAN Error Diagnostic Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cediag::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cediag::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Error Diagnostic Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cediag::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cediag::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CediagSpec;
 impl crate::RegisterSpec for CediagSpec {
     type Ux = u32;

va416xx/src/can0/cgcr.rs

@@ -115,78 +115,66 @@ impl R {
 impl W {
     #[doc = "Bit 0 - CAN Enable"]
     #[inline(always)]
-    #[must_use]
     pub fn canen(&mut self) -> CanenW<CgcrSpec> {
         CanenW::new(self, 0)
     }
     #[doc = "Bit 1 - RW,Control Receive"]
     #[inline(always)]
-    #[must_use]
     pub fn crx(&mut self) -> CrxW<CgcrSpec> {
         CrxW::new(self, 1)
     }
     #[doc = "Bit 2 - RW,Control Transmit"]
     #[inline(always)]
-    #[must_use]
     pub fn ctx(&mut self) -> CtxW<CgcrSpec> {
         CtxW::new(self, 2)
     }
     #[doc = "Bit 3 - Buffer Lock"]
     #[inline(always)]
-    #[must_use]
     pub fn bufflock(&mut self) -> BufflockW<CgcrSpec> {
         BufflockW::new(self, 3)
     }
     #[doc = "Bit 4 - Time Sync Enable"]
     #[inline(always)]
-    #[must_use]
     pub fn tstpen(&mut self) -> TstpenW<CgcrSpec> {
         TstpenW::new(self, 4)
     }
     #[doc = "Bit 5 - Data Direction"]
     #[inline(always)]
-    #[must_use]
     pub fn ddir(&mut self) -> DdirW<CgcrSpec> {
         DdirW::new(self, 5)
     }
     #[doc = "Bit 6 - Listen Only"]
     #[inline(always)]
-    #[must_use]
     pub fn lo(&mut self) -> LoW<CgcrSpec> {
         LoW::new(self, 6)
     }
     #[doc = "Bit 7 - Ignore Acknowledge"]
     #[inline(always)]
-    #[must_use]
     pub fn ignack(&mut self) -> IgnackW<CgcrSpec> {
         IgnackW::new(self, 7)
     }
     #[doc = "Bit 8 - Loopback"]
     #[inline(always)]
-    #[must_use]
     pub fn loopback(&mut self) -> LoopbackW<CgcrSpec> {
         LoopbackW::new(self, 8)
     }
     #[doc = "Bit 9 - Internal"]
     #[inline(always)]
-    #[must_use]
     pub fn internal(&mut self) -> InternalW<CgcrSpec> {
         InternalW::new(self, 9)
     }
     #[doc = "Bit 10 - Diagnostic Enable"]
     #[inline(always)]
-    #[must_use]
     pub fn diagen(&mut self) -> DiagenW<CgcrSpec> {
         DiagenW::new(self, 10)
     }
     #[doc = "Bit 11 - Error Interrupt Type"]
     #[inline(always)]
-    #[must_use]
     pub fn eit(&mut self) -> EitW<CgcrSpec> {
         EitW::new(self, 11)
     }
 }
-#[doc = "CAN Global Configuration Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cgcr::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cgcr::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Global Configuration Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cgcr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cgcr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CgcrSpec;
 impl crate::RegisterSpec for CgcrSpec {
     type Ux = u32;

va416xx/src/can0/cicen.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Code Enable\\[14:0\\]"]
     #[inline(always)]
-    #[must_use]
     pub fn icen(&mut self) -> IcenW<CicenSpec> {
         IcenW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Code Enable"]
     #[inline(always)]
-    #[must_use]
     pub fn eicen(&mut self) -> EicenW<CicenSpec> {
         EicenW::new(self, 15)
     }
 }
-#[doc = "CAN Interrupt Code Enable Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cicen::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cicen::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Interrupt Code Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cicen::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cicen::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CicenSpec;
 impl crate::RegisterSpec for CicenSpec {
     type Ux = u32;

va416xx/src/can0/ciclr.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Clear\\[14:0\\]"]
     #[inline(always)]
-    #[must_use]
     pub fn iclr(&mut self) -> IclrW<CiclrSpec> {
         IclrW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Clear"]
     #[inline(always)]
-    #[must_use]
     pub fn eiclr(&mut self) -> EiclrW<CiclrSpec> {
         EiclrW::new(self, 15)
     }
 }
-#[doc = "CAN Interrupt Clear Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ciclr::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ciclr::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Interrupt Clear Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ciclr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ciclr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CiclrSpec;
 impl crate::RegisterSpec for CiclrSpec {
     type Ux = u32;

va416xx/src/can0/cien.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Enable\\[14:0\\]"]
     #[inline(always)]
-    #[must_use]
     pub fn ien(&mut self) -> IenW<CienSpec> {
         IenW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Enable"]
     #[inline(always)]
-    #[must_use]
     pub fn eien(&mut self) -> EienW<CienSpec> {
         EienW::new(self, 15)
     }
 }
-#[doc = "CAN Interrupt Enable Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cien::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cien::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Interrupt Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cien::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cien::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CienSpec;
 impl crate::RegisterSpec for CienSpec {
     type Ux = u32;

va416xx/src/can0/cipnd.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Pending\\[14:0\\]"]
     #[inline(always)]
-    #[must_use]
     pub fn ipnd(&mut self) -> IpndW<CipndSpec> {
         IpndW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Pending"]
     #[inline(always)]
-    #[must_use]
     pub fn eipnd(&mut self) -> EipndW<CipndSpec> {
         EipndW::new(self, 15)
     }
 }
-#[doc = "CAN Interrupt Pending Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cipnd::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cipnd::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Interrupt Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cipnd::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cipnd::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CipndSpec;
 impl crate::RegisterSpec for CipndSpec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb0.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb0Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb0Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb0Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb0::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb0::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb0Spec;
 impl crate::RegisterSpec for CnstatCmb0Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb1.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb1Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb1Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb1Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb1::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb1::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb1::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb1::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb1Spec;
 impl crate::RegisterSpec for CnstatCmb1Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb10.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb10Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb10Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb10Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb10::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb10::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb10::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb10::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb10Spec;
 impl crate::RegisterSpec for CnstatCmb10Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb11.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb11Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb11Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb11Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb11::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb11::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb11::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb11::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb11Spec;
 impl crate::RegisterSpec for CnstatCmb11Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb12.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb12Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb12Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb12Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb12::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb12::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb12::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb12::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb12Spec;
 impl crate::RegisterSpec for CnstatCmb12Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb13.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb13Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb13Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb13Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb13::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb13::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb13::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb13::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb13Spec;
 impl crate::RegisterSpec for CnstatCmb13Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb14.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb14Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb14Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb14Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb14::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb14::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb14::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb14::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb14Spec;
 impl crate::RegisterSpec for CnstatCmb14Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb2.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb2Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb2Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb2Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb2::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb2::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb2::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb2::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb2Spec;
 impl crate::RegisterSpec for CnstatCmb2Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb3.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb3Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb3Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb3Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb3::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb3::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb3::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb3::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb3Spec;
 impl crate::RegisterSpec for CnstatCmb3Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb4.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb4Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb4Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb4Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb4::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb4::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb4::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb4::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb4Spec;
 impl crate::RegisterSpec for CnstatCmb4Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb5.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb5Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb5Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb5Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb5::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb5::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb5::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb5::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb5Spec;
 impl crate::RegisterSpec for CnstatCmb5Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb6.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb6Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb6Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb6Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb6::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb6::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb6::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb6::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb6Spec;
 impl crate::RegisterSpec for CnstatCmb6Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb7.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb7Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb7Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb7Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb7::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb7::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb7::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb7::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb7Spec;
 impl crate::RegisterSpec for CnstatCmb7Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb8.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb8Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb8Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb8Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb8::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb8::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb8::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb8::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb8Spec;
 impl crate::RegisterSpec for CnstatCmb8Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_cmb9.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatCmb9Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatCmb9Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatCmb9Spec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_cmb9::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_cmb9::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb9::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb9::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatCmb9Spec;
 impl crate::RegisterSpec for CnstatCmb9Spec {
     type Ux = u32;

va416xx/src/can0/cnstat_hcmb.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    #[must_use]
     pub fn st(&mut self) -> StW<CnstatHcmbSpec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    #[must_use]
     pub fn pri(&mut self) -> PriW<CnstatHcmbSpec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    #[must_use]
     pub fn dlc(&mut self) -> DlcW<CnstatHcmbSpec> {
         DlcW::new(self, 12)
     }
 }
-#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cnstat_hcmb::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cnstat_hcmb::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_hcmb::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_hcmb::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CnstatHcmbSpec;
 impl crate::RegisterSpec for CnstatHcmbSpec {
     type Ux = u32;

va416xx/src/can0/cstpnd.rs

@@ -34,24 +34,21 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Interrupt Source portion of Interrupt Code"]
     #[inline(always)]
-    #[must_use]
     pub fn ist(&mut self) -> IstW<CstpndSpec> {
         IstW::new(self, 0)
     }
     #[doc = "Bit 4 - Interrupt Request portion of Interrupt Code"]
     #[inline(always)]
-    #[must_use]
     pub fn irq(&mut self) -> IrqW<CstpndSpec> {
         IrqW::new(self, 4)
     }
     #[doc = "Bits 5:7 - CAN Node Status"]
     #[inline(always)]
-    #[must_use]
     pub fn ns(&mut self) -> NsW<CstpndSpec> {
         NsW::new(self, 5)
     }
 }
-#[doc = "CAN Status Pending Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cstpnd::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cstpnd::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Status Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cstpnd::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cstpnd::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CstpndSpec;
 impl crate::RegisterSpec for CstpndSpec {
     type Ux = u32;

va416xx/src/can0/ctim.rs

@@ -43,30 +43,26 @@ impl R {
 impl W {
     #[doc = "Bits 0:2 - Time Segment 2"]
     #[inline(always)]
-    #[must_use]
     pub fn tseg2(&mut self) -> Tseg2W<CtimSpec> {
         Tseg2W::new(self, 0)
     }
     #[doc = "Bits 3:6 - Time Segment 1"]
     #[inline(always)]
-    #[must_use]
     pub fn tseg1(&mut self) -> Tseg1W<CtimSpec> {
         Tseg1W::new(self, 3)
     }
     #[doc = "Bits 7:8 - Synchronization Jump Width"]
     #[inline(always)]
-    #[must_use]
     pub fn sjw(&mut self) -> SjwW<CtimSpec> {
         SjwW::new(self, 7)
     }
     #[doc = "Bits 9:15 - Prescaler Configuration"]
     #[inline(always)]
-    #[must_use]
     pub fn psc(&mut self) -> PscW<CtimSpec> {
         PscW::new(self, 9)
     }
 }
-#[doc = "CAN Timing Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctim::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctim::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Timing Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctim::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctim::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CtimSpec;
 impl crate::RegisterSpec for CtimSpec {
     type Ux = u32;

va416xx/src/can0/ctmr.rs

@@ -12,7 +12,7 @@ impl R {
     }
 }
 impl W {}
-#[doc = "CAN Timer Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctmr::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctmr::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Timer Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctmr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctmr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct CtmrSpec;
 impl crate::RegisterSpec for CtmrSpec {
     type Ux = u32;

va416xx/src/can0/data0_cmb0.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb0Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb0Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb0::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb0::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb0Spec;
 impl crate::RegisterSpec for Data0Cmb0Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb1.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb1Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb1Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb1::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb1::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb1::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb1::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb1Spec;
 impl crate::RegisterSpec for Data0Cmb1Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb10.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb10Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb10Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb10::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb10::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb10::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb10::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb10Spec;
 impl crate::RegisterSpec for Data0Cmb10Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb11.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb11Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb11Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb11::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb11::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb11::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb11::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb11Spec;
 impl crate::RegisterSpec for Data0Cmb11Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb12.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb12Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb12Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb12::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb12::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb12::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb12::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb12Spec;
 impl crate::RegisterSpec for Data0Cmb12Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb13.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb13Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb13Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb13::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb13::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb13::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb13::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb13Spec;
 impl crate::RegisterSpec for Data0Cmb13Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb14.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb14Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb14Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb14::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb14::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb14::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb14::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb14Spec;
 impl crate::RegisterSpec for Data0Cmb14Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb2.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb2Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb2Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb2::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb2::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb2::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb2::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb2Spec;
 impl crate::RegisterSpec for Data0Cmb2Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb3.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb3Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb3Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb3::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb3::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb3::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb3::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb3Spec;
 impl crate::RegisterSpec for Data0Cmb3Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb4.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb4Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb4Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb4::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb4::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb4::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb4::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb4Spec;
 impl crate::RegisterSpec for Data0Cmb4Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb5.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb5Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb5Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb5::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb5::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb5::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb5::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb5Spec;
 impl crate::RegisterSpec for Data0Cmb5Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb6.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb6Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb6Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb6::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb6::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb6::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb6::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb6Spec;
 impl crate::RegisterSpec for Data0Cmb6Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb7.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb7Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb7Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb7::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb7::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb7::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb7::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb7Spec;
 impl crate::RegisterSpec for Data0Cmb7Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb8.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb8Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb8Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb8::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb8::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb8::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb8::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb8Spec;
 impl crate::RegisterSpec for Data0Cmb8Spec {
     type Ux = u32;

va416xx/src/can0/data0_cmb9.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0Cmb9Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0Cmb9Spec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_cmb9::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_cmb9::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb9::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb9::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0Cmb9Spec;
 impl crate::RegisterSpec for Data0Cmb9Spec {
     type Ux = u32;

va416xx/src/can0/data0_hcmb.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    #[must_use]
     pub fn byte2(&mut self) -> Byte2W<Data0HcmbSpec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    #[must_use]
     pub fn byte1(&mut self) -> Byte1W<Data0HcmbSpec> {
         Byte1W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data0_hcmb::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data0_hcmb::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_hcmb::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_hcmb::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data0HcmbSpec;
 impl crate::RegisterSpec for Data0HcmbSpec {
     type Ux = u32;

va416xx/src/can0/data1_cmb0.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb0Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb0Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb0::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb0::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb0Spec;
 impl crate::RegisterSpec for Data1Cmb0Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb1.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb1Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb1Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb1::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb1::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb1::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb1::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb1Spec;
 impl crate::RegisterSpec for Data1Cmb1Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb10.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb10Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb10Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb10::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb10::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb10::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb10::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb10Spec;
 impl crate::RegisterSpec for Data1Cmb10Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb11.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb11Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb11Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb11::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb11::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb11::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb11::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb11Spec;
 impl crate::RegisterSpec for Data1Cmb11Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb12.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb12Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb12Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb12::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb12::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb12::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb12::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb12Spec;
 impl crate::RegisterSpec for Data1Cmb12Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb13.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb13Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb13Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb13::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb13::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb13::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb13::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb13Spec;
 impl crate::RegisterSpec for Data1Cmb13Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb14.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb14Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb14Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb14::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb14::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb14::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb14::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb14Spec;
 impl crate::RegisterSpec for Data1Cmb14Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb2.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb2Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb2Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb2::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb2::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb2::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb2::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb2Spec;
 impl crate::RegisterSpec for Data1Cmb2Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb3.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb3Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb3Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb3::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb3::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb3::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb3::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb3Spec;
 impl crate::RegisterSpec for Data1Cmb3Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb4.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb4Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb4Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb4::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb4::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb4::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb4::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb4Spec;
 impl crate::RegisterSpec for Data1Cmb4Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb5.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb5Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb5Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb5::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb5::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb5::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb5::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb5Spec;
 impl crate::RegisterSpec for Data1Cmb5Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb6.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb6Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb6Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb6::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb6::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb6::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb6::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb6Spec;
 impl crate::RegisterSpec for Data1Cmb6Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb7.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb7Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb7Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb7::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb7::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb7::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb7::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb7Spec;
 impl crate::RegisterSpec for Data1Cmb7Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb8.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb8Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb8Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb8::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb8::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb8::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb8::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb8Spec;
 impl crate::RegisterSpec for Data1Cmb8Spec {
     type Ux = u32;

va416xx/src/can0/data1_cmb9.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1Cmb9Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1Cmb9Spec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_cmb9::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_cmb9::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb9::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb9::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1Cmb9Spec;
 impl crate::RegisterSpec for Data1Cmb9Spec {
     type Ux = u32;

va416xx/src/can0/data1_hcmb.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    #[must_use]
     pub fn byte4(&mut self) -> Byte4W<Data1HcmbSpec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    #[must_use]
     pub fn byte3(&mut self) -> Byte3W<Data1HcmbSpec> {
         Byte3W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data1_hcmb::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data1_hcmb::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_hcmb::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_hcmb::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data1HcmbSpec;
 impl crate::RegisterSpec for Data1HcmbSpec {
     type Ux = u32;

va416xx/src/can0/data2_cmb0.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb0Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb0Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb0::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb0::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb0Spec;
 impl crate::RegisterSpec for Data2Cmb0Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb1.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb1Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb1Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb1::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb1::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb1::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb1::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb1Spec;
 impl crate::RegisterSpec for Data2Cmb1Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb10.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb10Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb10Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb10::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb10::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb10::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb10::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb10Spec;
 impl crate::RegisterSpec for Data2Cmb10Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb11.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb11Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb11Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb11::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb11::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb11::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb11::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb11Spec;
 impl crate::RegisterSpec for Data2Cmb11Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb12.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb12Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb12Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb12::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb12::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb12::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb12::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb12Spec;
 impl crate::RegisterSpec for Data2Cmb12Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb13.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb13Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb13Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb13::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb13::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb13::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb13::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb13Spec;
 impl crate::RegisterSpec for Data2Cmb13Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb14.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb14Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb14Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb14::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb14::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb14::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb14::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb14Spec;
 impl crate::RegisterSpec for Data2Cmb14Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb2.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb2Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb2Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb2::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb2::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb2::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb2::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb2Spec;
 impl crate::RegisterSpec for Data2Cmb2Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb3.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb3Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb3Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb3::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb3::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb3::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb3::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb3Spec;
 impl crate::RegisterSpec for Data2Cmb3Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb4.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb4Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb4Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb4::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb4::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb4::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb4::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb4Spec;
 impl crate::RegisterSpec for Data2Cmb4Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb5.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb5Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb5Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb5::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb5::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb5::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb5::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb5Spec;
 impl crate::RegisterSpec for Data2Cmb5Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb6.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb6Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb6Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb6::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb6::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb6::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb6::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb6Spec;
 impl crate::RegisterSpec for Data2Cmb6Spec {
     type Ux = u32;

va416xx/src/can0/data2_cmb7.rs

@@ -25,18 +25,16 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    #[must_use]
     pub fn byte6(&mut self) -> Byte6W<Data2Cmb7Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    #[must_use]
     pub fn byte5(&mut self) -> Byte5W<Data2Cmb7Spec> {
         Byte5W::new(self, 8)
     }
 }
-#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data2_cmb7::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data2_cmb7::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
+#[doc = "CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb7::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb7::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
 pub struct Data2Cmb7Spec;
 impl crate::RegisterSpec for Data2Cmb7Spec {
     type Ux = u32;