typo

README.md

@@ -40,7 +40,7 @@ Some parts of the HAL implementation and the Embassy-rs support are contained in
 Use the following command to have a starting `config.toml` file
 
 ```sh
-cp .cargo/config.toml.template .cargo/config.toml
+cp .cargo/def-config.toml .cargo/config.toml
 ```
 
 You then can adapt the `config.toml` to your needs. For example, you can configure runners
@@ -61,6 +61,16 @@ You can then adapt the files in `.vscode` to your needs.
 You can use CLI or VS Code for flashing, running and debugging. In any case, take
 care of installing the pre-requisites first.
 
+### Pre-Requisites
+
+1. [SEGGER J-Link tools](https://www.segger.com/downloads/jlink/) installed
+2. [Rust `thumbv7em-none-eaibhf` toolchain](https://doc.rust-lang.org/nightly/rustc/platform-support/thumbv7em-none-eabi.html).
+   Use the following command to install it:
+
+   ```sh
+   rustup target add thumbv7em-none-eabihf
+   ```
+
 ### Using CLI with probe-rs
 
 Install [probe-rs](https://probe.rs/docs/getting-started/installation/) first.
@@ -80,15 +90,6 @@ available for persistent flashing.
 Runner configuration is available in the `.cargo/def-config.toml` file to use `probe-rs` for
 convenience. `probe-rs` is also able to process and display `defmt` strings directly.
 
-### Pre-Requisites
-
-1. [SEGGER J-Link tools](https://www.segger.com/downloads/jlink/) installed
-2. [gdb-multiarch](https://packages.debian.org/sid/gdb-multiarch) or similar
-   cross-architecture debugger installed. All commands here assume `gdb-multiarch`.
-
-### Using CLI
-
-
 ### Using VS Code
 
 Assuming a working debug connection to your VA416xx board, you can debug using VS Code with

examples/simple/examples/pwm_test.rs

@@ -0,0 +1,44 @@
+//! Simple PWM example
+//!
+//! Outputs a PWM waveform on pin PG2.
+#![no_main]
+#![no_std]
+
+use cortex_m_rt::entry;
+use embedded_hal::pwm::SetDutyCycle;
+// Import panic provider.
+use panic_probe as _;
+// Import logger.
+use defmt_rtt as _;
+use simple_examples::peb1;
+use va416xx_hal::{
+    clock::ClockConfigurator,
+    pac,
+    pins::PinsG,
+    prelude::*,
+    pwm::{get_duty_from_percent, PwmPin},
+};
+
+#[entry]
+fn main() -> ! {
+    defmt::println!("-- VA108xx PWM example application--");
+    let dp = pac::Peripherals::take().unwrap();
+
+    // Use the external clock connected to XTAL_N.
+    let clocks = ClockConfigurator::new(dp.clkgen)
+        .xtal_n_clk_with_src_freq(peb1::EXTCLK_FREQ)
+        .freeze()
+        .unwrap();
+
+    let pinsg = PinsG::new(dp.portg);
+    let mut pwm = PwmPin::new(pinsg.pg2, dp.tim9, &clocks, 10.kHz()).unwrap();
+    //let mut delay_timer = CountdownTimer::new(dp.tim0, &clocks);
+    //let mut current_duty_cycle = 0.0;
+    pwm.set_duty_cycle(get_duty_from_percent(0.5)).unwrap();
+    pwm.enable();
+
+    // Delete type information, increased code readibility for the rest of the code
+    loop {
+        cortex_m::asm::nop();
+    }
+}

va416xx-hal/src/can/asynch.rs

@@ -102,7 +102,7 @@ pub fn on_interrupt_can(
         super::regs::CanInterruptId::Buffer(idx) => {
             let mut channel = unsafe { CanChannelLowLevel::steal_unchecked(id, idx) };
             let status = channel.read_state();
-            if let Err(e) = status {
+            if status.is_err() {
                 let mut clr = InterruptClear::new_with_raw_value(0);
                 clr.set_buffer(idx, true);
                 regs.write_iclr(clr);
@@ -110,7 +110,7 @@ pub fn on_interrupt_can(
                     val.set_buffer(idx, false);
                     val
                 });
-                return Err(InterruptError::InvalidStatus(e));
+                return Err(InterruptError::InvalidStatus(status.unwrap_err()));
             }
             let buf_state = status.unwrap();
             if buf_state == BufferState::TxNotActive {

va416xx/CHANGELOG.md

@@ -8,10 +8,6 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
-## [v0.5.0] 2025-09-03
-
-- Re-generated PAC with `svd2rust` v0.37.0
-
 ## [v0.4.1] 2025-07-22
 
 defmt v1
@@ -41,7 +37,6 @@ defmt v1
   Clippy is disabled in CI/CD for now.
 - Initial release
 
-[unreleased]: https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/compare/va416xx-v0.5.0...HEAD
-[v0.5.0]: https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/compare/va416xx-v0.4.1...va416xx-v0.5.0
+[unreleased]: https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/compare/va416xx-v0.4.1...HEAD
 [v0.4.1]: https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/compare/va416xx-v0.4.0...va416xx-v0.4.1
 [v0.4.0]: https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/compare/va416xx-v0.3.0...va416xx-v0.4.0

va416xx/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "va416xx"
-version = "0.5.0"
+version = "0.4.1"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "PAC for the Vorago VA416xx family of MCUs"

va416xx/src/adc.rs

@@ -65,52 +65,62 @@ impl RegisterBlock {
         &self.perid
     }
 }
-#[doc = "CTRL (rw) register accessor: Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`] module"]
+#[doc = "CTRL (rw) register accessor: Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`]
+module"]
 #[doc(alias = "CTRL")]
 pub type Ctrl = crate::Reg<ctrl::CtrlSpec>;
 #[doc = "Control Register"]
 pub mod ctrl;
-#[doc = "FIFO_DATA (r) register accessor: FIFO data\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_data::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_data`] module"]
+#[doc = "FIFO_DATA (r) register accessor: FIFO data\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_data::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_data`]
+module"]
 #[doc(alias = "FIFO_DATA")]
 pub type FifoData = crate::Reg<fifo_data::FifoDataSpec>;
 #[doc = "FIFO data"]
 pub mod fifo_data;
-#[doc = "STATUS (r) register accessor: Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`] module"]
+#[doc = "STATUS (r) register accessor: Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
+module"]
 #[doc(alias = "STATUS")]
 pub type Status = crate::Reg<status::StatusSpec>;
 #[doc = "Status"]
 pub mod status;
-#[doc = "IRQ_ENB (rw) register accessor: Interrupt Enable\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_enb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_enb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_enb`] module"]
+#[doc = "IRQ_ENB (rw) register accessor: Interrupt Enable\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_enb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_enb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_enb`]
+module"]
 #[doc(alias = "IRQ_ENB")]
 pub type IrqEnb = crate::Reg<irq_enb::IrqEnbSpec>;
 #[doc = "Interrupt Enable"]
 pub mod irq_enb;
-#[doc = "IRQ_RAW (r) register accessor: Raw Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_raw`] module"]
+#[doc = "IRQ_RAW (r) register accessor: Raw Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_raw`]
+module"]
 #[doc(alias = "IRQ_RAW")]
 pub type IrqRaw = crate::Reg<irq_raw::IrqRawSpec>;
 #[doc = "Raw Interrupt Status"]
 pub mod irq_raw;
-#[doc = "IRQ_END (r) register accessor: Enabled Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_end::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_end`] module"]
+#[doc = "IRQ_END (r) register accessor: Enabled Interrupt Status\n\nYou can [`read`](crate::Reg::read) this register and get [`irq_end::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_end`]
+module"]
 #[doc(alias = "IRQ_END")]
 pub type IrqEnd = crate::Reg<irq_end::IrqEndSpec>;
 #[doc = "Enabled Interrupt Status"]
 pub mod irq_end;
-#[doc = "IRQ_CLR (w) register accessor: Clear Interrupt\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_clr`] module"]
+#[doc = "IRQ_CLR (w) register accessor: Clear Interrupt\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`irq_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@irq_clr`]
+module"]
 #[doc(alias = "IRQ_CLR")]
 pub type IrqClr = crate::Reg<irq_clr::IrqClrSpec>;
 #[doc = "Clear Interrupt"]
 pub mod irq_clr;
-#[doc = "RXFIFOIRQTRG (rw) register accessor: Receive FIFO Interrupt Trigger Value\n\nYou can [`read`](crate::Reg::read) this register and get [`rxfifoirqtrg::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rxfifoirqtrg::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rxfifoirqtrg`] module"]
+#[doc = "RXFIFOIRQTRG (rw) register accessor: Receive FIFO Interrupt Trigger Value\n\nYou can [`read`](crate::Reg::read) this register and get [`rxfifoirqtrg::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rxfifoirqtrg::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rxfifoirqtrg`]
+module"]
 #[doc(alias = "RXFIFOIRQTRG")]
 pub type Rxfifoirqtrg = crate::Reg<rxfifoirqtrg::RxfifoirqtrgSpec>;
 #[doc = "Receive FIFO Interrupt Trigger Value"]
 pub mod rxfifoirqtrg;
-#[doc = "FIFO_CLR (rw) register accessor: FIFO Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_clr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`fifo_clr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_clr`] module"]
+#[doc = "FIFO_CLR (rw) register accessor: FIFO Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`fifo_clr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`fifo_clr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo_clr`]
+module"]
 #[doc(alias = "FIFO_CLR")]
 pub type FifoClr = crate::Reg<fifo_clr::FifoClrSpec>;
 #[doc = "FIFO Clear"]
 pub mod fifo_clr;
-#[doc = "PERID (r) register accessor: Peripheral ID Register\n\nYou can [`read`](crate::Reg::read) this register and get [`perid::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@perid`] module"]
+#[doc = "PERID (r) register accessor: Peripheral ID Register\n\nYou can [`read`](crate::Reg::read) this register and get [`perid::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@perid`]
+module"]
 #[doc(alias = "PERID")]
 pub type Perid = crate::Reg<perid::PeridSpec>;
 #[doc = "Peripheral ID Register"]

va416xx/src/adc/ctrl.rs

@@ -61,32 +61,32 @@ impl R {
 impl W {
     #[doc = "Bits 0:15 - Enables the channel for data collection"]
     #[inline(always)]
-    pub fn chan_en(&mut self) -> ChanEnW<'_, CtrlSpec> {
+    pub fn chan_en(&mut self) -> ChanEnW<CtrlSpec> {
         ChanEnW::new(self, 0)
     }
     #[doc = "Bit 16 - Enables the channel tag to be saved with the ADC data"]
     #[inline(always)]
-    pub fn chan_tag_en(&mut self) -> ChanTagEnW<'_, CtrlSpec> {
+    pub fn chan_tag_en(&mut self) -> ChanTagEnW<CtrlSpec> {
         ChanTagEnW::new(self, 16)
     }
     #[doc = "Bit 17 - ADC data acquisition for all enabled channel"]
     #[inline(always)]
-    pub fn sweep_en(&mut self) -> SweepEnW<'_, CtrlSpec> {
+    pub fn sweep_en(&mut self) -> SweepEnW<CtrlSpec> {
         SweepEnW::new(self, 17)
     }
     #[doc = "Bit 18 - Allows the external trigger to start analog acquisition"]
     #[inline(always)]
-    pub fn ext_trig_en(&mut self) -> ExtTrigEnW<'_, CtrlSpec> {
+    pub fn ext_trig_en(&mut self) -> ExtTrigEnW<CtrlSpec> {
         ExtTrigEnW::new(self, 18)
     }
     #[doc = "Bit 19 - Starts analog acquisition"]
     #[inline(always)]
-    pub fn manual_trig(&mut self) -> ManualTrigW<'_, CtrlSpec> {
+    pub fn manual_trig(&mut self) -> ManualTrigW<CtrlSpec> {
         ManualTrigW::new(self, 19)
     }
     #[doc = "Bits 20:23 - Conversion count describes the number of conversions to be applied for triggers/sweeps. (N+1 conversions)"]
     #[inline(always)]
-    pub fn conv_cnt(&mut self) -> ConvCntW<'_, CtrlSpec> {
+    pub fn conv_cnt(&mut self) -> ConvCntW<CtrlSpec> {
         ConvCntW::new(self, 20)
     }
 }
@@ -100,6 +100,10 @@ impl crate::Readable for CtrlSpec {}
 #[doc = "`write(|w| ..)` method takes [`ctrl::W`](W) writer structure"]
 impl crate::Writable for CtrlSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CTRL to value 0"]
-impl crate::Resettable for CtrlSpec {}
+impl crate::Resettable for CtrlSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/adc/fifo_clr.rs

@@ -7,7 +7,7 @@ pub type FifoClrW<'a, REG> = crate::BitWriter<'a, REG>;
 impl W {
     #[doc = "Bit 0 - Clears the ADC FIFO. Always reads 0"]
     #[inline(always)]
-    pub fn fifo_clr(&mut self) -> FifoClrW<'_, FifoClrSpec> {
+    pub fn fifo_clr(&mut self) -> FifoClrW<FifoClrSpec> {
         FifoClrW::new(self, 0)
     }
 }
@@ -21,6 +21,10 @@ impl crate::Readable for FifoClrSpec {}
 #[doc = "`write(|w| ..)` method takes [`fifo_clr::W`](W) writer structure"]
 impl crate::Writable for FifoClrSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets FIFO_CLR to value 0"]
-impl crate::Resettable for FifoClrSpec {}
+impl crate::Resettable for FifoClrSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/adc/fifo_data.rs

@@ -24,4 +24,6 @@ impl crate::RegisterSpec for FifoDataSpec {
 #[doc = "`read()` method returns [`fifo_data::R`](R) reader structure"]
 impl crate::Readable for FifoDataSpec {}
 #[doc = "`reset()` method sets FIFO_DATA to value 0"]
-impl crate::Resettable for FifoDataSpec {}
+impl crate::Resettable for FifoDataSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/adc/irq_clr.rs

@@ -11,22 +11,22 @@ pub type TrigErrorW<'a, REG> = crate::BitWriter<'a, REG>;
 impl W {
     #[doc = "Bit 0 - Clears the FIFO overflow interrupt status. Always reads 0"]
     #[inline(always)]
-    pub fn fifo_oflow(&mut self) -> FifoOflowW<'_, IrqClrSpec> {
+    pub fn fifo_oflow(&mut self) -> FifoOflowW<IrqClrSpec> {
         FifoOflowW::new(self, 0)
     }
     #[doc = "Bit 1 - Clears the FIFO underflow interrupt status. Always reads 0"]
     #[inline(always)]
-    pub fn fifo_uflow(&mut self) -> FifoUflowW<'_, IrqClrSpec> {
+    pub fn fifo_uflow(&mut self) -> FifoUflowW<IrqClrSpec> {
         FifoUflowW::new(self, 1)
     }
     #[doc = "Bit 2 - Clears the ADC done interrupt status. Always reads 0"]
     #[inline(always)]
-    pub fn adc_done(&mut self) -> AdcDoneW<'_, IrqClrSpec> {
+    pub fn adc_done(&mut self) -> AdcDoneW<IrqClrSpec> {
         AdcDoneW::new(self, 2)
     }
     #[doc = "Bit 3 - Clears the trigger error interrupt status. Always reads 0"]
     #[inline(always)]
-    pub fn trig_error(&mut self) -> TrigErrorW<'_, IrqClrSpec> {
+    pub fn trig_error(&mut self) -> TrigErrorW<IrqClrSpec> {
         TrigErrorW::new(self, 3)
     }
 }
@@ -38,6 +38,10 @@ impl crate::RegisterSpec for IrqClrSpec {
 #[doc = "`write(|w| ..)` method takes [`irq_clr::W`](W) writer structure"]
 impl crate::Writable for IrqClrSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets IRQ_CLR to value 0"]
-impl crate::Resettable for IrqClrSpec {}
+impl crate::Resettable for IrqClrSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/adc/irq_enb.rs

@@ -70,37 +70,37 @@ impl R {
 impl W {
     #[doc = "Bit 0 - Enables the interrupt for FIFO empty"]
     #[inline(always)]
-    pub fn fifo_empty(&mut self) -> FifoEmptyW<'_, IrqEnbSpec> {
+    pub fn fifo_empty(&mut self) -> FifoEmptyW<IrqEnbSpec> {
         FifoEmptyW::new(self, 0)
     }
     #[doc = "Bit 1 - Enables the interrupt for FIFO full"]
     #[inline(always)]
-    pub fn fifo_full(&mut self) -> FifoFullW<'_, IrqEnbSpec> {
+    pub fn fifo_full(&mut self) -> FifoFullW<IrqEnbSpec> {
         FifoFullW::new(self, 1)
     }
     #[doc = "Bit 2 - Enables the interrupt for a FIFO overflow"]
     #[inline(always)]
-    pub fn fifo_oflow(&mut self) -> FifoOflowW<'_, IrqEnbSpec> {
+    pub fn fifo_oflow(&mut self) -> FifoOflowW<IrqEnbSpec> {
         FifoOflowW::new(self, 2)
     }
     #[doc = "Bit 3 - Enables the interrupt for a FIFO underflow"]
     #[inline(always)]
-    pub fn fifo_uflow(&mut self) -> FifoUflowW<'_, IrqEnbSpec> {
+    pub fn fifo_uflow(&mut self) -> FifoUflowW<IrqEnbSpec> {
         FifoUflowW::new(self, 3)
     }
     #[doc = "Bit 4 - Enables the interrupt for an ADC data acquisition completion"]
     #[inline(always)]
-    pub fn adc_done(&mut self) -> AdcDoneW<'_, IrqEnbSpec> {
+    pub fn adc_done(&mut self) -> AdcDoneW<IrqEnbSpec> {
         AdcDoneW::new(self, 4)
     }
     #[doc = "Bit 5 - Enables the interrupt for a trigger error"]
     #[inline(always)]
-    pub fn trig_error(&mut self) -> TrigErrorW<'_, IrqEnbSpec> {
+    pub fn trig_error(&mut self) -> TrigErrorW<IrqEnbSpec> {
         TrigErrorW::new(self, 5)
     }
     #[doc = "Bit 6 - Enables the interrupt for the FIFO entry count meets or exceeds the trigger level"]
     #[inline(always)]
-    pub fn fifo_depth_trig(&mut self) -> FifoDepthTrigW<'_, IrqEnbSpec> {
+    pub fn fifo_depth_trig(&mut self) -> FifoDepthTrigW<IrqEnbSpec> {
         FifoDepthTrigW::new(self, 6)
     }
 }
@@ -114,6 +114,10 @@ impl crate::Readable for IrqEnbSpec {}
 #[doc = "`write(|w| ..)` method takes [`irq_enb::W`](W) writer structure"]
 impl crate::Writable for IrqEnbSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets IRQ_ENB to value 0"]
-impl crate::Resettable for IrqEnbSpec {}
+impl crate::Resettable for IrqEnbSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/adc/irq_end.rs

@@ -59,4 +59,6 @@ impl crate::RegisterSpec for IrqEndSpec {
 #[doc = "`read()` method returns [`irq_end::R`](R) reader structure"]
 impl crate::Readable for IrqEndSpec {}
 #[doc = "`reset()` method sets IRQ_END to value 0"]
-impl crate::Resettable for IrqEndSpec {}
+impl crate::Resettable for IrqEndSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/adc/rxfifoirqtrg.rs

@@ -16,7 +16,7 @@ impl R {
 impl W {
     #[doc = "Bits 0:4 - Sets the FIFO_ENTRY_CNT value that asserts the FIFO_DEPTH_TRIG interrupt"]
     #[inline(always)]
-    pub fn level(&mut self) -> LevelW<'_, RxfifoirqtrgSpec> {
+    pub fn level(&mut self) -> LevelW<RxfifoirqtrgSpec> {
         LevelW::new(self, 0)
     }
 }
@@ -30,6 +30,8 @@ impl crate::Readable for RxfifoirqtrgSpec {}
 #[doc = "`write(|w| ..)` method takes [`rxfifoirqtrg::W`](W) writer structure"]
 impl crate::Writable for RxfifoirqtrgSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets RXFIFOIRQTRG to value 0x10"]
 impl crate::Resettable for RxfifoirqtrgSpec {

va416xx/src/adc/status.rs

@@ -24,4 +24,6 @@ impl crate::RegisterSpec for StatusSpec {
 #[doc = "`read()` method returns [`status::R`](R) reader structure"]
 impl crate::Readable for StatusSpec {}
 #[doc = "`reset()` method sets STATUS to value 0"]
-impl crate::Resettable for StatusSpec {}
+impl crate::Resettable for StatusSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0.rs

@@ -856,712 +856,854 @@ impl RegisterBlock {
         &self.ctmr
     }
 }
-#[doc = "CNSTAT_CMB0 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb0`] module"]
+#[doc = "CNSTAT_CMB0 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb0`]
+module"]
 #[doc(alias = "CNSTAT_CMB0")]
 pub type CnstatCmb0 = crate::Reg<cnstat_cmb0::CnstatCmb0Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb0;
-#[doc = "TSTP_CMB0 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb0`] module"]
+#[doc = "TSTP_CMB0 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb0`]
+module"]
 #[doc(alias = "TSTP_CMB0")]
 pub type TstpCmb0 = crate::Reg<tstp_cmb0::TstpCmb0Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb0;
-#[doc = "DATA3_CMB0 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb0`] module"]
+#[doc = "DATA3_CMB0 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb0`]
+module"]
 #[doc(alias = "DATA3_CMB0")]
 pub type Data3Cmb0 = crate::Reg<data3_cmb0::Data3Cmb0Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb0;
-#[doc = "DATA2_CMB0 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb0`] module"]
+#[doc = "DATA2_CMB0 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb0`]
+module"]
 #[doc(alias = "DATA2_CMB0")]
 pub type Data2Cmb0 = crate::Reg<data2_cmb0::Data2Cmb0Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb0;
-#[doc = "DATA1_CMB0 (rw) register accessor: CAN Frame Data Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb0`] module"]
+#[doc = "DATA1_CMB0 (rw) register accessor: CAN Frame Data Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb0`]
+module"]
 #[doc(alias = "DATA1_CMB0")]
 pub type Data1Cmb0 = crate::Reg<data1_cmb0::Data1Cmb0Spec>;
 #[doc = "CAN Frame Data Word 1"]
 pub mod data1_cmb0;
-#[doc = "DATA0_CMB0 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb0`] module"]
+#[doc = "DATA0_CMB0 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb0`]
+module"]
 #[doc(alias = "DATA0_CMB0")]
 pub type Data0Cmb0 = crate::Reg<data0_cmb0::Data0Cmb0Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb0;
-#[doc = "ID0_CMB0 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb0`] module"]
+#[doc = "ID0_CMB0 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb0`]
+module"]
 #[doc(alias = "ID0_CMB0")]
 pub type Id0Cmb0 = crate::Reg<id0_cmb0::Id0Cmb0Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb0;
-#[doc = "ID1_CMB0 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb0`] module"]
+#[doc = "ID1_CMB0 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb0`]
+module"]
 #[doc(alias = "ID1_CMB0")]
 pub type Id1Cmb0 = crate::Reg<id1_cmb0::Id1Cmb0Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb0;
-#[doc = "CNSTAT_CMB1 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb1`] module"]
+#[doc = "CNSTAT_CMB1 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb1`]
+module"]
 #[doc(alias = "CNSTAT_CMB1")]
 pub type CnstatCmb1 = crate::Reg<cnstat_cmb1::CnstatCmb1Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb1;
-#[doc = "TSTP_CMB1 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb1`] module"]
+#[doc = "TSTP_CMB1 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb1`]
+module"]
 #[doc(alias = "TSTP_CMB1")]
 pub type TstpCmb1 = crate::Reg<tstp_cmb1::TstpCmb1Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb1;
-#[doc = "DATA3_CMB1 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb1`] module"]
+#[doc = "DATA3_CMB1 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb1`]
+module"]
 #[doc(alias = "DATA3_CMB1")]
 pub type Data3Cmb1 = crate::Reg<data3_cmb1::Data3Cmb1Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb1;
-#[doc = "DATA2_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb1`] module"]
+#[doc = "DATA2_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb1`]
+module"]
 #[doc(alias = "DATA2_CMB1")]
 pub type Data2Cmb1 = crate::Reg<data2_cmb1::Data2Cmb1Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb1;
-#[doc = "DATA1_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb1`] module"]
+#[doc = "DATA1_CMB1 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb1`]
+module"]
 #[doc(alias = "DATA1_CMB1")]
 pub type Data1Cmb1 = crate::Reg<data1_cmb1::Data1Cmb1Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb1;
-#[doc = "DATA0_CMB1 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb1`] module"]
+#[doc = "DATA0_CMB1 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb1`]
+module"]
 #[doc(alias = "DATA0_CMB1")]
 pub type Data0Cmb1 = crate::Reg<data0_cmb1::Data0Cmb1Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb1;
-#[doc = "ID0_CMB1 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb1`] module"]
+#[doc = "ID0_CMB1 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb1`]
+module"]
 #[doc(alias = "ID0_CMB1")]
 pub type Id0Cmb1 = crate::Reg<id0_cmb1::Id0Cmb1Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb1;
-#[doc = "ID1_CMB1 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb1`] module"]
+#[doc = "ID1_CMB1 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb1`]
+module"]
 #[doc(alias = "ID1_CMB1")]
 pub type Id1Cmb1 = crate::Reg<id1_cmb1::Id1Cmb1Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb1;
-#[doc = "CNSTAT_CMB2 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb2`] module"]
+#[doc = "CNSTAT_CMB2 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb2`]
+module"]
 #[doc(alias = "CNSTAT_CMB2")]
 pub type CnstatCmb2 = crate::Reg<cnstat_cmb2::CnstatCmb2Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb2;
-#[doc = "TSTP_CMB2 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb2`] module"]
+#[doc = "TSTP_CMB2 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb2`]
+module"]
 #[doc(alias = "TSTP_CMB2")]
 pub type TstpCmb2 = crate::Reg<tstp_cmb2::TstpCmb2Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb2;
-#[doc = "DATA3_CMB2 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb2`] module"]
+#[doc = "DATA3_CMB2 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb2`]
+module"]
 #[doc(alias = "DATA3_CMB2")]
 pub type Data3Cmb2 = crate::Reg<data3_cmb2::Data3Cmb2Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb2;
-#[doc = "DATA2_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb2`] module"]
+#[doc = "DATA2_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb2`]
+module"]
 #[doc(alias = "DATA2_CMB2")]
 pub type Data2Cmb2 = crate::Reg<data2_cmb2::Data2Cmb2Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb2;
-#[doc = "DATA1_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb2`] module"]
+#[doc = "DATA1_CMB2 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb2`]
+module"]
 #[doc(alias = "DATA1_CMB2")]
 pub type Data1Cmb2 = crate::Reg<data1_cmb2::Data1Cmb2Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb2;
-#[doc = "DATA0_CMB2 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb2`] module"]
+#[doc = "DATA0_CMB2 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb2`]
+module"]
 #[doc(alias = "DATA0_CMB2")]
 pub type Data0Cmb2 = crate::Reg<data0_cmb2::Data0Cmb2Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb2;
-#[doc = "ID0_CMB2 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb2`] module"]
+#[doc = "ID0_CMB2 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb2`]
+module"]
 #[doc(alias = "ID0_CMB2")]
 pub type Id0Cmb2 = crate::Reg<id0_cmb2::Id0Cmb2Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb2;
-#[doc = "ID1_CMB2 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb2`] module"]
+#[doc = "ID1_CMB2 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb2`]
+module"]
 #[doc(alias = "ID1_CMB2")]
 pub type Id1Cmb2 = crate::Reg<id1_cmb2::Id1Cmb2Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb2;
-#[doc = "CNSTAT_CMB3 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb3`] module"]
+#[doc = "CNSTAT_CMB3 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb3`]
+module"]
 #[doc(alias = "CNSTAT_CMB3")]
 pub type CnstatCmb3 = crate::Reg<cnstat_cmb3::CnstatCmb3Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb3;
-#[doc = "TSTP_CMB3 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb3`] module"]
+#[doc = "TSTP_CMB3 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb3`]
+module"]
 #[doc(alias = "TSTP_CMB3")]
 pub type TstpCmb3 = crate::Reg<tstp_cmb3::TstpCmb3Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb3;
-#[doc = "DATA3_CMB3 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb3`] module"]
+#[doc = "DATA3_CMB3 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb3`]
+module"]
 #[doc(alias = "DATA3_CMB3")]
 pub type Data3Cmb3 = crate::Reg<data3_cmb3::Data3Cmb3Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb3;
-#[doc = "DATA2_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb3`] module"]
+#[doc = "DATA2_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb3`]
+module"]
 #[doc(alias = "DATA2_CMB3")]
 pub type Data2Cmb3 = crate::Reg<data2_cmb3::Data2Cmb3Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb3;
-#[doc = "DATA1_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb3`] module"]
+#[doc = "DATA1_CMB3 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb3`]
+module"]
 #[doc(alias = "DATA1_CMB3")]
 pub type Data1Cmb3 = crate::Reg<data1_cmb3::Data1Cmb3Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb3;
-#[doc = "DATA0_CMB3 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb3`] module"]
+#[doc = "DATA0_CMB3 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb3`]
+module"]
 #[doc(alias = "DATA0_CMB3")]
 pub type Data0Cmb3 = crate::Reg<data0_cmb3::Data0Cmb3Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb3;
-#[doc = "ID0_CMB3 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb3`] module"]
+#[doc = "ID0_CMB3 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb3`]
+module"]
 #[doc(alias = "ID0_CMB3")]
 pub type Id0Cmb3 = crate::Reg<id0_cmb3::Id0Cmb3Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb3;
-#[doc = "ID1_CMB3 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb3`] module"]
+#[doc = "ID1_CMB3 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb3`]
+module"]
 #[doc(alias = "ID1_CMB3")]
 pub type Id1Cmb3 = crate::Reg<id1_cmb3::Id1Cmb3Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb3;
-#[doc = "CNSTAT_CMB4 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb4`] module"]
+#[doc = "CNSTAT_CMB4 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb4`]
+module"]
 #[doc(alias = "CNSTAT_CMB4")]
 pub type CnstatCmb4 = crate::Reg<cnstat_cmb4::CnstatCmb4Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb4;
-#[doc = "TSTP_CMB4 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb4`] module"]
+#[doc = "TSTP_CMB4 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb4`]
+module"]
 #[doc(alias = "TSTP_CMB4")]
 pub type TstpCmb4 = crate::Reg<tstp_cmb4::TstpCmb4Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb4;
-#[doc = "DATA3_CMB4 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb4`] module"]
+#[doc = "DATA3_CMB4 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb4`]
+module"]
 #[doc(alias = "DATA3_CMB4")]
 pub type Data3Cmb4 = crate::Reg<data3_cmb4::Data3Cmb4Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb4;
-#[doc = "DATA2_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb4`] module"]
+#[doc = "DATA2_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb4`]
+module"]
 #[doc(alias = "DATA2_CMB4")]
 pub type Data2Cmb4 = crate::Reg<data2_cmb4::Data2Cmb4Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb4;
-#[doc = "DATA1_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb4`] module"]
+#[doc = "DATA1_CMB4 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb4`]
+module"]
 #[doc(alias = "DATA1_CMB4")]
 pub type Data1Cmb4 = crate::Reg<data1_cmb4::Data1Cmb4Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb4;
-#[doc = "DATA0_CMB4 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb4`] module"]
+#[doc = "DATA0_CMB4 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb4`]
+module"]
 #[doc(alias = "DATA0_CMB4")]
 pub type Data0Cmb4 = crate::Reg<data0_cmb4::Data0Cmb4Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb4;
-#[doc = "ID0_CMB4 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb4`] module"]
+#[doc = "ID0_CMB4 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb4`]
+module"]
 #[doc(alias = "ID0_CMB4")]
 pub type Id0Cmb4 = crate::Reg<id0_cmb4::Id0Cmb4Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb4;
-#[doc = "ID1_CMB4 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb4`] module"]
+#[doc = "ID1_CMB4 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb4`]
+module"]
 #[doc(alias = "ID1_CMB4")]
 pub type Id1Cmb4 = crate::Reg<id1_cmb4::Id1Cmb4Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb4;
-#[doc = "CNSTAT_CMB5 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb5`] module"]
+#[doc = "CNSTAT_CMB5 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb5`]
+module"]
 #[doc(alias = "CNSTAT_CMB5")]
 pub type CnstatCmb5 = crate::Reg<cnstat_cmb5::CnstatCmb5Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb5;
-#[doc = "TSTP_CMB5 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb5`] module"]
+#[doc = "TSTP_CMB5 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb5`]
+module"]
 #[doc(alias = "TSTP_CMB5")]
 pub type TstpCmb5 = crate::Reg<tstp_cmb5::TstpCmb5Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb5;
-#[doc = "DATA3_CMB5 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb5`] module"]
+#[doc = "DATA3_CMB5 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb5`]
+module"]
 #[doc(alias = "DATA3_CMB5")]
 pub type Data3Cmb5 = crate::Reg<data3_cmb5::Data3Cmb5Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb5;
-#[doc = "DATA2_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb5`] module"]
+#[doc = "DATA2_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb5`]
+module"]
 #[doc(alias = "DATA2_CMB5")]
 pub type Data2Cmb5 = crate::Reg<data2_cmb5::Data2Cmb5Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb5;
-#[doc = "DATA1_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb5`] module"]
+#[doc = "DATA1_CMB5 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb5`]
+module"]
 #[doc(alias = "DATA1_CMB5")]
 pub type Data1Cmb5 = crate::Reg<data1_cmb5::Data1Cmb5Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb5;
-#[doc = "DATA0_CMB5 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb5`] module"]
+#[doc = "DATA0_CMB5 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb5`]
+module"]
 #[doc(alias = "DATA0_CMB5")]
 pub type Data0Cmb5 = crate::Reg<data0_cmb5::Data0Cmb5Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb5;
-#[doc = "ID0_CMB5 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb5`] module"]
+#[doc = "ID0_CMB5 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb5`]
+module"]
 #[doc(alias = "ID0_CMB5")]
 pub type Id0Cmb5 = crate::Reg<id0_cmb5::Id0Cmb5Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb5;
-#[doc = "ID1_CMB5 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb5`] module"]
+#[doc = "ID1_CMB5 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb5`]
+module"]
 #[doc(alias = "ID1_CMB5")]
 pub type Id1Cmb5 = crate::Reg<id1_cmb5::Id1Cmb5Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb5;
-#[doc = "CNSTAT_CMB6 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb6`] module"]
+#[doc = "CNSTAT_CMB6 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb6`]
+module"]
 #[doc(alias = "CNSTAT_CMB6")]
 pub type CnstatCmb6 = crate::Reg<cnstat_cmb6::CnstatCmb6Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb6;
-#[doc = "TSTP_CMB6 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb6`] module"]
+#[doc = "TSTP_CMB6 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb6`]
+module"]
 #[doc(alias = "TSTP_CMB6")]
 pub type TstpCmb6 = crate::Reg<tstp_cmb6::TstpCmb6Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb6;
-#[doc = "DATA3_CMB6 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb6`] module"]
+#[doc = "DATA3_CMB6 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb6`]
+module"]
 #[doc(alias = "DATA3_CMB6")]
 pub type Data3Cmb6 = crate::Reg<data3_cmb6::Data3Cmb6Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb6;
-#[doc = "DATA2_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb6`] module"]
+#[doc = "DATA2_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb6`]
+module"]
 #[doc(alias = "DATA2_CMB6")]
 pub type Data2Cmb6 = crate::Reg<data2_cmb6::Data2Cmb6Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb6;
-#[doc = "DATA1_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb6`] module"]
+#[doc = "DATA1_CMB6 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb6`]
+module"]
 #[doc(alias = "DATA1_CMB6")]
 pub type Data1Cmb6 = crate::Reg<data1_cmb6::Data1Cmb6Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb6;
-#[doc = "DATA0_CMB6 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb6`] module"]
+#[doc = "DATA0_CMB6 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb6`]
+module"]
 #[doc(alias = "DATA0_CMB6")]
 pub type Data0Cmb6 = crate::Reg<data0_cmb6::Data0Cmb6Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb6;
-#[doc = "ID0_CMB6 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb6`] module"]
+#[doc = "ID0_CMB6 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb6`]
+module"]
 #[doc(alias = "ID0_CMB6")]
 pub type Id0Cmb6 = crate::Reg<id0_cmb6::Id0Cmb6Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb6;
-#[doc = "ID1_CMB6 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb6`] module"]
+#[doc = "ID1_CMB6 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb6::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb6::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb6`]
+module"]
 #[doc(alias = "ID1_CMB6")]
 pub type Id1Cmb6 = crate::Reg<id1_cmb6::Id1Cmb6Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb6;
-#[doc = "CNSTAT_CMB7 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb7`] module"]
+#[doc = "CNSTAT_CMB7 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb7`]
+module"]
 #[doc(alias = "CNSTAT_CMB7")]
 pub type CnstatCmb7 = crate::Reg<cnstat_cmb7::CnstatCmb7Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb7;
-#[doc = "TSTP_CMB7 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb7`] module"]
+#[doc = "TSTP_CMB7 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb7`]
+module"]
 #[doc(alias = "TSTP_CMB7")]
 pub type TstpCmb7 = crate::Reg<tstp_cmb7::TstpCmb7Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb7;
-#[doc = "DATA3_CMB7 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb7`] module"]
+#[doc = "DATA3_CMB7 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb7`]
+module"]
 #[doc(alias = "DATA3_CMB7")]
 pub type Data3Cmb7 = crate::Reg<data3_cmb7::Data3Cmb7Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb7;
-#[doc = "DATA2_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb7`] module"]
+#[doc = "DATA2_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb7`]
+module"]
 #[doc(alias = "DATA2_CMB7")]
 pub type Data2Cmb7 = crate::Reg<data2_cmb7::Data2Cmb7Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb7;
-#[doc = "DATA1_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb7`] module"]
+#[doc = "DATA1_CMB7 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb7`]
+module"]
 #[doc(alias = "DATA1_CMB7")]
 pub type Data1Cmb7 = crate::Reg<data1_cmb7::Data1Cmb7Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb7;
-#[doc = "DATA0_CMB7 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb7`] module"]
+#[doc = "DATA0_CMB7 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb7`]
+module"]
 #[doc(alias = "DATA0_CMB7")]
 pub type Data0Cmb7 = crate::Reg<data0_cmb7::Data0Cmb7Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb7;
-#[doc = "ID0_CMB7 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb7`] module"]
+#[doc = "ID0_CMB7 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb7`]
+module"]
 #[doc(alias = "ID0_CMB7")]
 pub type Id0Cmb7 = crate::Reg<id0_cmb7::Id0Cmb7Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb7;
-#[doc = "ID1_CMB7 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb7`] module"]
+#[doc = "ID1_CMB7 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb7::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb7::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb7`]
+module"]
 #[doc(alias = "ID1_CMB7")]
 pub type Id1Cmb7 = crate::Reg<id1_cmb7::Id1Cmb7Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb7;
-#[doc = "CNSTAT_CMB8 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb8`] module"]
+#[doc = "CNSTAT_CMB8 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb8`]
+module"]
 #[doc(alias = "CNSTAT_CMB8")]
 pub type CnstatCmb8 = crate::Reg<cnstat_cmb8::CnstatCmb8Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb8;
-#[doc = "TSTP_CMB8 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb8`] module"]
+#[doc = "TSTP_CMB8 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb8`]
+module"]
 #[doc(alias = "TSTP_CMB8")]
 pub type TstpCmb8 = crate::Reg<tstp_cmb8::TstpCmb8Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb8;
-#[doc = "DATA3_CMB8 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb8`] module"]
+#[doc = "DATA3_CMB8 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb8`]
+module"]
 #[doc(alias = "DATA3_CMB8")]
 pub type Data3Cmb8 = crate::Reg<data3_cmb8::Data3Cmb8Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb8;
-#[doc = "DATA2_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb8`] module"]
+#[doc = "DATA2_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb8`]
+module"]
 #[doc(alias = "DATA2_CMB8")]
 pub type Data2Cmb8 = crate::Reg<data2_cmb8::Data2Cmb8Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb8;
-#[doc = "DATA1_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb8`] module"]
+#[doc = "DATA1_CMB8 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb8`]
+module"]
 #[doc(alias = "DATA1_CMB8")]
 pub type Data1Cmb8 = crate::Reg<data1_cmb8::Data1Cmb8Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb8;
-#[doc = "DATA0_CMB8 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb8`] module"]
+#[doc = "DATA0_CMB8 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb8`]
+module"]
 #[doc(alias = "DATA0_CMB8")]
 pub type Data0Cmb8 = crate::Reg<data0_cmb8::Data0Cmb8Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb8;
-#[doc = "ID0_CMB8 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb8`] module"]
+#[doc = "ID0_CMB8 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb8`]
+module"]
 #[doc(alias = "ID0_CMB8")]
 pub type Id0Cmb8 = crate::Reg<id0_cmb8::Id0Cmb8Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb8;
-#[doc = "ID1_CMB8 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb8`] module"]
+#[doc = "ID1_CMB8 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb8::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb8::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb8`]
+module"]
 #[doc(alias = "ID1_CMB8")]
 pub type Id1Cmb8 = crate::Reg<id1_cmb8::Id1Cmb8Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb8;
-#[doc = "CNSTAT_CMB9 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb9`] module"]
+#[doc = "CNSTAT_CMB9 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb9`]
+module"]
 #[doc(alias = "CNSTAT_CMB9")]
 pub type CnstatCmb9 = crate::Reg<cnstat_cmb9::CnstatCmb9Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb9;
-#[doc = "TSTP_CMB9 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb9`] module"]
+#[doc = "TSTP_CMB9 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb9`]
+module"]
 #[doc(alias = "TSTP_CMB9")]
 pub type TstpCmb9 = crate::Reg<tstp_cmb9::TstpCmb9Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb9;
-#[doc = "DATA3_CMB9 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb9`] module"]
+#[doc = "DATA3_CMB9 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb9`]
+module"]
 #[doc(alias = "DATA3_CMB9")]
 pub type Data3Cmb9 = crate::Reg<data3_cmb9::Data3Cmb9Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb9;
-#[doc = "DATA2_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb9`] module"]
+#[doc = "DATA2_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb9`]
+module"]
 #[doc(alias = "DATA2_CMB9")]
 pub type Data2Cmb9 = crate::Reg<data2_cmb9::Data2Cmb9Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb9;
-#[doc = "DATA1_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb9`] module"]
+#[doc = "DATA1_CMB9 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb9`]
+module"]
 #[doc(alias = "DATA1_CMB9")]
 pub type Data1Cmb9 = crate::Reg<data1_cmb9::Data1Cmb9Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb9;
-#[doc = "DATA0_CMB9 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb9`] module"]
+#[doc = "DATA0_CMB9 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb9`]
+module"]
 #[doc(alias = "DATA0_CMB9")]
 pub type Data0Cmb9 = crate::Reg<data0_cmb9::Data0Cmb9Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb9;
-#[doc = "ID0_CMB9 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb9`] module"]
+#[doc = "ID0_CMB9 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb9`]
+module"]
 #[doc(alias = "ID0_CMB9")]
 pub type Id0Cmb9 = crate::Reg<id0_cmb9::Id0Cmb9Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb9;
-#[doc = "ID1_CMB9 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb9`] module"]
+#[doc = "ID1_CMB9 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb9::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb9::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb9`]
+module"]
 #[doc(alias = "ID1_CMB9")]
 pub type Id1Cmb9 = crate::Reg<id1_cmb9::Id1Cmb9Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb9;
-#[doc = "CNSTAT_CMB10 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb10`] module"]
+#[doc = "CNSTAT_CMB10 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb10`]
+module"]
 #[doc(alias = "CNSTAT_CMB10")]
 pub type CnstatCmb10 = crate::Reg<cnstat_cmb10::CnstatCmb10Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb10;
-#[doc = "TSTP_CMB10 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb10`] module"]
+#[doc = "TSTP_CMB10 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb10`]
+module"]
 #[doc(alias = "TSTP_CMB10")]
 pub type TstpCmb10 = crate::Reg<tstp_cmb10::TstpCmb10Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb10;
-#[doc = "DATA3_CMB10 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb10`] module"]
+#[doc = "DATA3_CMB10 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb10`]
+module"]
 #[doc(alias = "DATA3_CMB10")]
 pub type Data3Cmb10 = crate::Reg<data3_cmb10::Data3Cmb10Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb10;
-#[doc = "DATA2_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb10`] module"]
+#[doc = "DATA2_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb10`]
+module"]
 #[doc(alias = "DATA2_CMB10")]
 pub type Data2Cmb10 = crate::Reg<data2_cmb10::Data2Cmb10Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb10;
-#[doc = "DATA1_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb10`] module"]
+#[doc = "DATA1_CMB10 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb10`]
+module"]
 #[doc(alias = "DATA1_CMB10")]
 pub type Data1Cmb10 = crate::Reg<data1_cmb10::Data1Cmb10Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb10;
-#[doc = "DATA0_CMB10 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb10`] module"]
+#[doc = "DATA0_CMB10 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb10`]
+module"]
 #[doc(alias = "DATA0_CMB10")]
 pub type Data0Cmb10 = crate::Reg<data0_cmb10::Data0Cmb10Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb10;
-#[doc = "ID0_CMB10 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb10`] module"]
+#[doc = "ID0_CMB10 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb10`]
+module"]
 #[doc(alias = "ID0_CMB10")]
 pub type Id0Cmb10 = crate::Reg<id0_cmb10::Id0Cmb10Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb10;
-#[doc = "ID1_CMB10 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb10`] module"]
+#[doc = "ID1_CMB10 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb10::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb10::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb10`]
+module"]
 #[doc(alias = "ID1_CMB10")]
 pub type Id1Cmb10 = crate::Reg<id1_cmb10::Id1Cmb10Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb10;
-#[doc = "CNSTAT_CMB11 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb11`] module"]
+#[doc = "CNSTAT_CMB11 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb11`]
+module"]
 #[doc(alias = "CNSTAT_CMB11")]
 pub type CnstatCmb11 = crate::Reg<cnstat_cmb11::CnstatCmb11Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb11;
-#[doc = "TSTP_CMB11 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb11`] module"]
+#[doc = "TSTP_CMB11 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb11`]
+module"]
 #[doc(alias = "TSTP_CMB11")]
 pub type TstpCmb11 = crate::Reg<tstp_cmb11::TstpCmb11Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb11;
-#[doc = "DATA3_CMB11 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb11`] module"]
+#[doc = "DATA3_CMB11 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb11`]
+module"]
 #[doc(alias = "DATA3_CMB11")]
 pub type Data3Cmb11 = crate::Reg<data3_cmb11::Data3Cmb11Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb11;
-#[doc = "DATA2_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb11`] module"]
+#[doc = "DATA2_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb11`]
+module"]
 #[doc(alias = "DATA2_CMB11")]
 pub type Data2Cmb11 = crate::Reg<data2_cmb11::Data2Cmb11Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb11;
-#[doc = "DATA1_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb11`] module"]
+#[doc = "DATA1_CMB11 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb11`]
+module"]
 #[doc(alias = "DATA1_CMB11")]
 pub type Data1Cmb11 = crate::Reg<data1_cmb11::Data1Cmb11Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb11;
-#[doc = "DATA0_CMB11 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb11`] module"]
+#[doc = "DATA0_CMB11 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb11`]
+module"]
 #[doc(alias = "DATA0_CMB11")]
 pub type Data0Cmb11 = crate::Reg<data0_cmb11::Data0Cmb11Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb11;
-#[doc = "ID0_CMB11 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb11`] module"]
+#[doc = "ID0_CMB11 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb11`]
+module"]
 #[doc(alias = "ID0_CMB11")]
 pub type Id0Cmb11 = crate::Reg<id0_cmb11::Id0Cmb11Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb11;
-#[doc = "ID1_CMB11 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb11`] module"]
+#[doc = "ID1_CMB11 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb11::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb11::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb11`]
+module"]
 #[doc(alias = "ID1_CMB11")]
 pub type Id1Cmb11 = crate::Reg<id1_cmb11::Id1Cmb11Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb11;
-#[doc = "CNSTAT_CMB12 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb12`] module"]
+#[doc = "CNSTAT_CMB12 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb12`]
+module"]
 #[doc(alias = "CNSTAT_CMB12")]
 pub type CnstatCmb12 = crate::Reg<cnstat_cmb12::CnstatCmb12Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb12;
-#[doc = "TSTP_CMB12 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb12`] module"]
+#[doc = "TSTP_CMB12 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb12`]
+module"]
 #[doc(alias = "TSTP_CMB12")]
 pub type TstpCmb12 = crate::Reg<tstp_cmb12::TstpCmb12Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb12;
-#[doc = "DATA3_CMB12 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb12`] module"]
+#[doc = "DATA3_CMB12 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb12`]
+module"]
 #[doc(alias = "DATA3_CMB12")]
 pub type Data3Cmb12 = crate::Reg<data3_cmb12::Data3Cmb12Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb12;
-#[doc = "DATA2_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb12`] module"]
+#[doc = "DATA2_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb12`]
+module"]
 #[doc(alias = "DATA2_CMB12")]
 pub type Data2Cmb12 = crate::Reg<data2_cmb12::Data2Cmb12Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb12;
-#[doc = "DATA1_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb12`] module"]
+#[doc = "DATA1_CMB12 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb12`]
+module"]
 #[doc(alias = "DATA1_CMB12")]
 pub type Data1Cmb12 = crate::Reg<data1_cmb12::Data1Cmb12Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb12;
-#[doc = "DATA0_CMB12 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb12`] module"]
+#[doc = "DATA0_CMB12 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb12`]
+module"]
 #[doc(alias = "DATA0_CMB12")]
 pub type Data0Cmb12 = crate::Reg<data0_cmb12::Data0Cmb12Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb12;
-#[doc = "ID0_CMB12 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb12`] module"]
+#[doc = "ID0_CMB12 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb12`]
+module"]
 #[doc(alias = "ID0_CMB12")]
 pub type Id0Cmb12 = crate::Reg<id0_cmb12::Id0Cmb12Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb12;
-#[doc = "ID1_CMB12 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb12`] module"]
+#[doc = "ID1_CMB12 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb12::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb12::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb12`]
+module"]
 #[doc(alias = "ID1_CMB12")]
 pub type Id1Cmb12 = crate::Reg<id1_cmb12::Id1Cmb12Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb12;
-#[doc = "CNSTAT_CMB13 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb13`] module"]
+#[doc = "CNSTAT_CMB13 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb13`]
+module"]
 #[doc(alias = "CNSTAT_CMB13")]
 pub type CnstatCmb13 = crate::Reg<cnstat_cmb13::CnstatCmb13Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb13;
-#[doc = "TSTP_CMB13 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb13`] module"]
+#[doc = "TSTP_CMB13 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb13`]
+module"]
 #[doc(alias = "TSTP_CMB13")]
 pub type TstpCmb13 = crate::Reg<tstp_cmb13::TstpCmb13Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb13;
-#[doc = "DATA3_CMB13 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb13`] module"]
+#[doc = "DATA3_CMB13 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb13`]
+module"]
 #[doc(alias = "DATA3_CMB13")]
 pub type Data3Cmb13 = crate::Reg<data3_cmb13::Data3Cmb13Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb13;
-#[doc = "DATA2_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb13`] module"]
+#[doc = "DATA2_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb13`]
+module"]
 #[doc(alias = "DATA2_CMB13")]
 pub type Data2Cmb13 = crate::Reg<data2_cmb13::Data2Cmb13Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb13;
-#[doc = "DATA1_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb13`] module"]
+#[doc = "DATA1_CMB13 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb13`]
+module"]
 #[doc(alias = "DATA1_CMB13")]
 pub type Data1Cmb13 = crate::Reg<data1_cmb13::Data1Cmb13Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb13;
-#[doc = "DATA0_CMB13 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb13`] module"]
+#[doc = "DATA0_CMB13 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb13`]
+module"]
 #[doc(alias = "DATA0_CMB13")]
 pub type Data0Cmb13 = crate::Reg<data0_cmb13::Data0Cmb13Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb13;
-#[doc = "ID0_CMB13 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb13`] module"]
+#[doc = "ID0_CMB13 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb13`]
+module"]
 #[doc(alias = "ID0_CMB13")]
 pub type Id0Cmb13 = crate::Reg<id0_cmb13::Id0Cmb13Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb13;
-#[doc = "ID1_CMB13 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb13`] module"]
+#[doc = "ID1_CMB13 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb13::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb13::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb13`]
+module"]
 #[doc(alias = "ID1_CMB13")]
 pub type Id1Cmb13 = crate::Reg<id1_cmb13::Id1Cmb13Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb13;
-#[doc = "CNSTAT_CMB14 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb14`] module"]
+#[doc = "CNSTAT_CMB14 (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_cmb14`]
+module"]
 #[doc(alias = "CNSTAT_CMB14")]
 pub type CnstatCmb14 = crate::Reg<cnstat_cmb14::CnstatCmb14Spec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_cmb14;
-#[doc = "TSTP_CMB14 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb14`] module"]
+#[doc = "TSTP_CMB14 (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_cmb14`]
+module"]
 #[doc(alias = "TSTP_CMB14")]
 pub type TstpCmb14 = crate::Reg<tstp_cmb14::TstpCmb14Spec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_cmb14;
-#[doc = "DATA3_CMB14 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb14`] module"]
+#[doc = "DATA3_CMB14 (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_cmb14`]
+module"]
 #[doc(alias = "DATA3_CMB14")]
 pub type Data3Cmb14 = crate::Reg<data3_cmb14::Data3Cmb14Spec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_cmb14;
-#[doc = "DATA2_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb14`] module"]
+#[doc = "DATA2_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_cmb14`]
+module"]
 #[doc(alias = "DATA2_CMB14")]
 pub type Data2Cmb14 = crate::Reg<data2_cmb14::Data2Cmb14Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_cmb14;
-#[doc = "DATA1_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb14`] module"]
+#[doc = "DATA1_CMB14 (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_cmb14`]
+module"]
 #[doc(alias = "DATA1_CMB14")]
 pub type Data1Cmb14 = crate::Reg<data1_cmb14::Data1Cmb14Spec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_cmb14;
-#[doc = "DATA0_CMB14 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb14`] module"]
+#[doc = "DATA0_CMB14 (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_cmb14`]
+module"]
 #[doc(alias = "DATA0_CMB14")]
 pub type Data0Cmb14 = crate::Reg<data0_cmb14::Data0Cmb14Spec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_cmb14;
-#[doc = "ID0_CMB14 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb14`] module"]
+#[doc = "ID0_CMB14 (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_cmb14`]
+module"]
 #[doc(alias = "ID0_CMB14")]
 pub type Id0Cmb14 = crate::Reg<id0_cmb14::Id0Cmb14Spec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_cmb14;
-#[doc = "ID1_CMB14 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb14`] module"]
+#[doc = "ID1_CMB14 (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_cmb14::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_cmb14::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_cmb14`]
+module"]
 #[doc(alias = "ID1_CMB14")]
 pub type Id1Cmb14 = crate::Reg<id1_cmb14::Id1Cmb14Spec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_cmb14;
-#[doc = "CNSTAT_HCMB (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_hcmb`] module"]
+#[doc = "CNSTAT_HCMB (rw) register accessor: Buffer Status / Control Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cnstat_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cnstat_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cnstat_hcmb`]
+module"]
 #[doc(alias = "CNSTAT_HCMB")]
 pub type CnstatHcmb = crate::Reg<cnstat_hcmb::CnstatHcmbSpec>;
 #[doc = "Buffer Status / Control Register"]
 pub mod cnstat_hcmb;
-#[doc = "TSTP_HCMB (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_hcmb`] module"]
+#[doc = "TSTP_HCMB (rw) register accessor: CAN Frame Timestamp\n\nYou can [`read`](crate::Reg::read) this register and get [`tstp_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tstp_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tstp_hcmb`]
+module"]
 #[doc(alias = "TSTP_HCMB")]
 pub type TstpHcmb = crate::Reg<tstp_hcmb::TstpHcmbSpec>;
 #[doc = "CAN Frame Timestamp"]
 pub mod tstp_hcmb;
-#[doc = "DATA3_HCMB (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_hcmb`] module"]
+#[doc = "DATA3_HCMB (rw) register accessor: CAN Frame Data Word 3\n\nYou can [`read`](crate::Reg::read) this register and get [`data3_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data3_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data3_hcmb`]
+module"]
 #[doc(alias = "DATA3_HCMB")]
 pub type Data3Hcmb = crate::Reg<data3_hcmb::Data3HcmbSpec>;
 #[doc = "CAN Frame Data Word 3"]
 pub mod data3_hcmb;
-#[doc = "DATA2_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_hcmb`] module"]
+#[doc = "DATA2_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data2_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data2_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data2_hcmb`]
+module"]
 #[doc(alias = "DATA2_HCMB")]
 pub type Data2Hcmb = crate::Reg<data2_hcmb::Data2HcmbSpec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data2_hcmb;
-#[doc = "DATA1_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_hcmb`] module"]
+#[doc = "DATA1_HCMB (rw) register accessor: CAN Frame Data Word 2\n\nYou can [`read`](crate::Reg::read) this register and get [`data1_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data1_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data1_hcmb`]
+module"]
 #[doc(alias = "DATA1_HCMB")]
 pub type Data1Hcmb = crate::Reg<data1_hcmb::Data1HcmbSpec>;
 #[doc = "CAN Frame Data Word 2"]
 pub mod data1_hcmb;
-#[doc = "DATA0_HCMB (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_hcmb`] module"]
+#[doc = "DATA0_HCMB (rw) register accessor: CAN Frame Data Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`data0_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data0_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data0_hcmb`]
+module"]
 #[doc(alias = "DATA0_HCMB")]
 pub type Data0Hcmb = crate::Reg<data0_hcmb::Data0HcmbSpec>;
 #[doc = "CAN Frame Data Word 0"]
 pub mod data0_hcmb;
-#[doc = "ID0_HCMB (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_hcmb`] module"]
+#[doc = "ID0_HCMB (rw) register accessor: CAN Frame Identifier Word 0\n\nYou can [`read`](crate::Reg::read) this register and get [`id0_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id0_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id0_hcmb`]
+module"]
 #[doc(alias = "ID0_HCMB")]
 pub type Id0Hcmb = crate::Reg<id0_hcmb::Id0HcmbSpec>;
 #[doc = "CAN Frame Identifier Word 0"]
 pub mod id0_hcmb;
-#[doc = "ID1_HCMB (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_hcmb`] module"]
+#[doc = "ID1_HCMB (rw) register accessor: CAN Frame Identifier Word 1\n\nYou can [`read`](crate::Reg::read) this register and get [`id1_hcmb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id1_hcmb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id1_hcmb`]
+module"]
 #[doc(alias = "ID1_HCMB")]
 pub type Id1Hcmb = crate::Reg<id1_hcmb::Id1HcmbSpec>;
 #[doc = "CAN Frame Identifier Word 1"]
 pub mod id1_hcmb;
-#[doc = "CGCR (rw) register accessor: CAN Global Configuration Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cgcr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cgcr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cgcr`] module"]
+#[doc = "CGCR (rw) register accessor: CAN Global Configuration Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cgcr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cgcr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cgcr`]
+module"]
 #[doc(alias = "CGCR")]
 pub type Cgcr = crate::Reg<cgcr::CgcrSpec>;
 #[doc = "CAN Global Configuration Register"]
 pub mod cgcr;
-#[doc = "CTIM (rw) register accessor: CAN Timing Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctim::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctim::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctim`] module"]
+#[doc = "CTIM (rw) register accessor: CAN Timing Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctim::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctim::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctim`]
+module"]
 #[doc(alias = "CTIM")]
 pub type Ctim = crate::Reg<ctim::CtimSpec>;
 #[doc = "CAN Timing Register"]
 pub mod ctim;
-#[doc = "GMSKX (rw) register accessor: CAN Global Mask Extension\n\nYou can [`read`](crate::Reg::read) this register and get [`gmskx::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`gmskx::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskx`] module"]
+#[doc = "GMSKX (rw) register accessor: CAN Global Mask Extension\n\nYou can [`read`](crate::Reg::read) this register and get [`gmskx::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`gmskx::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskx`]
+module"]
 #[doc(alias = "GMSKX")]
 pub type Gmskx = crate::Reg<gmskx::GmskxSpec>;
 #[doc = "CAN Global Mask Extension"]
 pub mod gmskx;
-#[doc = "GMSKB (rw) register accessor: CAN Global Mask Base\n\nYou can [`read`](crate::Reg::read) this register and get [`gmskb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`gmskb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskb`] module"]
+#[doc = "GMSKB (rw) register accessor: CAN Global Mask Base\n\nYou can [`read`](crate::Reg::read) this register and get [`gmskb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`gmskb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gmskb`]
+module"]
 #[doc(alias = "GMSKB")]
 pub type Gmskb = crate::Reg<gmskb::GmskbSpec>;
 #[doc = "CAN Global Mask Base"]
 pub mod gmskb;
-#[doc = "BMSKX (rw) register accessor: CAN Basic Mask Extension\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskx::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskx::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskx`] module"]
+#[doc = "BMSKX (rw) register accessor: CAN Basic Mask Extension\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskx::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskx::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskx`]
+module"]
 #[doc(alias = "BMSKX")]
 pub type Bmskx = crate::Reg<bmskx::BmskxSpec>;
 #[doc = "CAN Basic Mask Extension"]
 pub mod bmskx;
-#[doc = "BMSKB (rw) register accessor: CAN Basic Mask Base\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskb`] module"]
+#[doc = "BMSKB (rw) register accessor: CAN Basic Mask Base\n\nYou can [`read`](crate::Reg::read) this register and get [`bmskb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bmskb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bmskb`]
+module"]
 #[doc(alias = "BMSKB")]
 pub type Bmskb = crate::Reg<bmskb::BmskbSpec>;
 #[doc = "CAN Basic Mask Base"]
 pub mod bmskb;
-#[doc = "CIEN (rw) register accessor: CAN Interrupt Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cien::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cien::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cien`] module"]
+#[doc = "CIEN (rw) register accessor: CAN Interrupt Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cien::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cien::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cien`]
+module"]
 #[doc(alias = "CIEN")]
 pub type Cien = crate::Reg<cien::CienSpec>;
 #[doc = "CAN Interrupt Enable Register"]
 pub mod cien;
-#[doc = "CIPND (rw) register accessor: CAN Interrupt Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cipnd::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cipnd::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cipnd`] module"]
+#[doc = "CIPND (rw) register accessor: CAN Interrupt Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cipnd::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cipnd::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cipnd`]
+module"]
 #[doc(alias = "CIPND")]
 pub type Cipnd = crate::Reg<cipnd::CipndSpec>;
 #[doc = "CAN Interrupt Pending Register"]
 pub mod cipnd;
-#[doc = "CICLR (rw) register accessor: CAN Interrupt Clear Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ciclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ciclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ciclr`] module"]
+#[doc = "CICLR (rw) register accessor: CAN Interrupt Clear Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ciclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ciclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ciclr`]
+module"]
 #[doc(alias = "CICLR")]
 pub type Ciclr = crate::Reg<ciclr::CiclrSpec>;
 #[doc = "CAN Interrupt Clear Register"]
 pub mod ciclr;
-#[doc = "CICEN (rw) register accessor: CAN Interrupt Code Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cicen::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cicen::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cicen`] module"]
+#[doc = "CICEN (rw) register accessor: CAN Interrupt Code Enable Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cicen::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cicen::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cicen`]
+module"]
 #[doc(alias = "CICEN")]
 pub type Cicen = crate::Reg<cicen::CicenSpec>;
 #[doc = "CAN Interrupt Code Enable Register"]
 pub mod cicen;
-#[doc = "CSTPND (rw) register accessor: CAN Status Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cstpnd::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cstpnd::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cstpnd`] module"]
+#[doc = "CSTPND (rw) register accessor: CAN Status Pending Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cstpnd::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cstpnd::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cstpnd`]
+module"]
 #[doc(alias = "CSTPND")]
 pub type Cstpnd = crate::Reg<cstpnd::CstpndSpec>;
 #[doc = "CAN Status Pending Register"]
 pub mod cstpnd;
-#[doc = "CANEC (rw) register accessor: CAN Error Counter Register\n\nYou can [`read`](crate::Reg::read) this register and get [`canec::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`canec::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@canec`] module"]
+#[doc = "CANEC (rw) register accessor: CAN Error Counter Register\n\nYou can [`read`](crate::Reg::read) this register and get [`canec::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`canec::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@canec`]
+module"]
 #[doc(alias = "CANEC")]
 pub type Canec = crate::Reg<canec::CanecSpec>;
 #[doc = "CAN Error Counter Register"]
 pub mod canec;
-#[doc = "CEDIAG (rw) register accessor: CAN Error Diagnostic Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cediag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cediag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cediag`] module"]
+#[doc = "CEDIAG (rw) register accessor: CAN Error Diagnostic Register\n\nYou can [`read`](crate::Reg::read) this register and get [`cediag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cediag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cediag`]
+module"]
 #[doc(alias = "CEDIAG")]
 pub type Cediag = crate::Reg<cediag::CediagSpec>;
 #[doc = "CAN Error Diagnostic Register"]
 pub mod cediag;
-#[doc = "CTMR (rw) register accessor: CAN Timer Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctmr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctmr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctmr`] module"]
+#[doc = "CTMR (rw) register accessor: CAN Timer Register\n\nYou can [`read`](crate::Reg::read) this register and get [`ctmr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctmr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctmr`]
+module"]
 #[doc(alias = "CTMR")]
 pub type Ctmr = crate::Reg<ctmr::CtmrSpec>;
 #[doc = "CAN Timer Register"]

va416xx/src/can0/bmskb.rs

@@ -2,9 +2,13 @@
 pub type R = crate::R<BmskbSpec>;
 #[doc = "Register `BMSKB` writer"]
 pub type W = crate::W<BmskbSpec>;
-#[doc = "Field `BM0` reader - BM\\[17:15\\] - Unused in standard, ID\\[17:15\\] in extended"]
+#[doc = "Field `BM0` reader - BM\\[17:15\\]
+- Unused in standard, ID\\[17:15\\]
+in extended"]
 pub type Bm0R = crate::FieldReader;
-#[doc = "Field `BM0` writer - BM\\[17:15\\] - Unused in standard, ID\\[17:15\\] in extended"]
+#[doc = "Field `BM0` writer - BM\\[17:15\\]
+- Unused in standard, ID\\[17:15\\]
+in extended"]
 pub type Bm0W<'a, REG> = crate::FieldWriter<'a, REG, 3>;
 #[doc = "Field `IDE` reader - Identifier Extension Bit"]
 pub type IdeR = crate::BitReader;
@@ -14,12 +18,20 @@ pub type IdeW<'a, REG> = crate::BitWriter<'a, REG>;
 pub type RtrR = crate::BitReader;
 #[doc = "Field `RTR` writer - Remote Transmission Request in Standard, Substitute Remote Request (SRR) in extended"]
 pub type RtrW<'a, REG> = crate::BitWriter<'a, REG>;
-#[doc = "Field `BM1` reader - BM\\[28:18\\] - ID\\[10:0\\] in standard, ID\\[28:18\\] in extended"]
+#[doc = "Field `BM1` reader - BM\\[28:18\\]
+- ID\\[10:0\\]
+in standard, ID\\[28:18\\]
+in extended"]
 pub type Bm1R = crate::FieldReader<u16>;
-#[doc = "Field `BM1` writer - BM\\[28:18\\] - ID\\[10:0\\] in standard, ID\\[28:18\\] in extended"]
+#[doc = "Field `BM1` writer - BM\\[28:18\\]
+- ID\\[10:0\\]
+in standard, ID\\[28:18\\]
+in extended"]
 pub type Bm1W<'a, REG> = crate::FieldWriter<'a, REG, 11, u16>;
 impl R {
-    #[doc = "Bits 0:2 - BM\\[17:15\\] - Unused in standard, ID\\[17:15\\] in extended"]
+    #[doc = "Bits 0:2 - BM\\[17:15\\]
+- Unused in standard, ID\\[17:15\\]
+in extended"]
     #[inline(always)]
     pub fn bm0(&self) -> Bm0R {
         Bm0R::new((self.bits & 7) as u8)
@@ -34,31 +46,39 @@ impl R {
     pub fn rtr(&self) -> RtrR {
         RtrR::new(((self.bits >> 4) & 1) != 0)
     }
-    #[doc = "Bits 5:15 - BM\\[28:18\\] - ID\\[10:0\\] in standard, ID\\[28:18\\] in extended"]
+    #[doc = "Bits 5:15 - BM\\[28:18\\]
+- ID\\[10:0\\]
+in standard, ID\\[28:18\\]
+in extended"]
     #[inline(always)]
     pub fn bm1(&self) -> Bm1R {
         Bm1R::new(((self.bits >> 5) & 0x07ff) as u16)
     }
 }
 impl W {
-    #[doc = "Bits 0:2 - BM\\[17:15\\] - Unused in standard, ID\\[17:15\\] in extended"]
+    #[doc = "Bits 0:2 - BM\\[17:15\\]
+- Unused in standard, ID\\[17:15\\]
+in extended"]
     #[inline(always)]
-    pub fn bm0(&mut self) -> Bm0W<'_, BmskbSpec> {
+    pub fn bm0(&mut self) -> Bm0W<BmskbSpec> {
         Bm0W::new(self, 0)
     }
     #[doc = "Bit 3 - Identifier Extension Bit"]
     #[inline(always)]
-    pub fn ide(&mut self) -> IdeW<'_, BmskbSpec> {
+    pub fn ide(&mut self) -> IdeW<BmskbSpec> {
         IdeW::new(self, 3)
     }
     #[doc = "Bit 4 - Remote Transmission Request in Standard, Substitute Remote Request (SRR) in extended"]
     #[inline(always)]
-    pub fn rtr(&mut self) -> RtrW<'_, BmskbSpec> {
+    pub fn rtr(&mut self) -> RtrW<BmskbSpec> {
         RtrW::new(self, 4)
     }
-    #[doc = "Bits 5:15 - BM\\[28:18\\] - ID\\[10:0\\] in standard, ID\\[28:18\\] in extended"]
+    #[doc = "Bits 5:15 - BM\\[28:18\\]
+- ID\\[10:0\\]
+in standard, ID\\[28:18\\]
+in extended"]
     #[inline(always)]
-    pub fn bm1(&mut self) -> Bm1W<'_, BmskbSpec> {
+    pub fn bm1(&mut self) -> Bm1W<BmskbSpec> {
         Bm1W::new(self, 5)
     }
 }
@@ -72,6 +92,10 @@ impl crate::Readable for BmskbSpec {}
 #[doc = "`write(|w| ..)` method takes [`bmskb::W`](W) writer structure"]
 impl crate::Writable for BmskbSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets BMSKB to value 0"]
-impl crate::Resettable for BmskbSpec {}
+impl crate::Resettable for BmskbSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/bmskx.rs

@@ -6,9 +6,13 @@ pub type W = crate::W<BmskxSpec>;
 pub type XrtrR = crate::BitReader;
 #[doc = "Field `XRTR` writer - Extended Remote transmission Request Bit"]
 pub type XrtrW<'a, REG> = crate::BitWriter<'a, REG>;
-#[doc = "Field `BM` reader - BM\\[14:0\\] used when an extended frame is received. ID\\[14:0\\] in extended, unused standard"]
+#[doc = "Field `BM` reader - BM\\[14:0\\]
+used when an extended frame is received. ID\\[14:0\\]
+in extended, unused standard"]
 pub type BmR = crate::FieldReader<u16>;
-#[doc = "Field `BM` writer - BM\\[14:0\\] used when an extended frame is received. ID\\[14:0\\] in extended, unused standard"]
+#[doc = "Field `BM` writer - BM\\[14:0\\]
+used when an extended frame is received. ID\\[14:0\\]
+in extended, unused standard"]
 pub type BmW<'a, REG> = crate::FieldWriter<'a, REG, 15, u16>;
 impl R {
     #[doc = "Bit 0 - Extended Remote transmission Request Bit"]
@@ -16,7 +20,9 @@ impl R {
     pub fn xrtr(&self) -> XrtrR {
         XrtrR::new((self.bits & 1) != 0)
     }
-    #[doc = "Bits 1:15 - BM\\[14:0\\] used when an extended frame is received. ID\\[14:0\\] in extended, unused standard"]
+    #[doc = "Bits 1:15 - BM\\[14:0\\]
+used when an extended frame is received. ID\\[14:0\\]
+in extended, unused standard"]
     #[inline(always)]
     pub fn bm(&self) -> BmR {
         BmR::new(((self.bits >> 1) & 0x7fff) as u16)
@@ -25,12 +31,14 @@ impl R {
 impl W {
     #[doc = "Bit 0 - Extended Remote transmission Request Bit"]
     #[inline(always)]
-    pub fn xrtr(&mut self) -> XrtrW<'_, BmskxSpec> {
+    pub fn xrtr(&mut self) -> XrtrW<BmskxSpec> {
         XrtrW::new(self, 0)
     }
-    #[doc = "Bits 1:15 - BM\\[14:0\\] used when an extended frame is received. ID\\[14:0\\] in extended, unused standard"]
+    #[doc = "Bits 1:15 - BM\\[14:0\\]
+used when an extended frame is received. ID\\[14:0\\]
+in extended, unused standard"]
     #[inline(always)]
-    pub fn bm(&mut self) -> BmW<'_, BmskxSpec> {
+    pub fn bm(&mut self) -> BmW<BmskxSpec> {
         BmW::new(self, 1)
     }
 }
@@ -44,6 +52,10 @@ impl crate::Readable for BmskxSpec {}
 #[doc = "`write(|w| ..)` method takes [`bmskx::W`](W) writer structure"]
 impl crate::Writable for BmskxSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets BMSKX to value 0"]
-impl crate::Resettable for BmskxSpec {}
+impl crate::Resettable for BmskxSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/canec.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Transmit Error Counter"]
     #[inline(always)]
-    pub fn tec(&mut self) -> TecW<'_, CanecSpec> {
+    pub fn tec(&mut self) -> TecW<CanecSpec> {
         TecW::new(self, 0)
     }
     #[doc = "Bits 8:15 - Receive Error Counter"]
     #[inline(always)]
-    pub fn rec(&mut self) -> RecW<'_, CanecSpec> {
+    pub fn rec(&mut self) -> RecW<CanecSpec> {
         RecW::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for CanecSpec {}
 #[doc = "`write(|w| ..)` method takes [`canec::W`](W) writer structure"]
 impl crate::Writable for CanecSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CANEC to value 0"]
-impl crate::Resettable for CanecSpec {}
+impl crate::Resettable for CanecSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cediag.rs

@@ -70,37 +70,37 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Error Field Identifier"]
     #[inline(always)]
-    pub fn efid(&mut self) -> EfidW<'_, CediagSpec> {
+    pub fn efid(&mut self) -> EfidW<CediagSpec> {
         EfidW::new(self, 0)
     }
     #[doc = "Bits 4:9 - Error Bit Identifier"]
     #[inline(always)]
-    pub fn ebid(&mut self) -> EbidW<'_, CediagSpec> {
+    pub fn ebid(&mut self) -> EbidW<CediagSpec> {
         EbidW::new(self, 4)
     }
     #[doc = "Bit 10 - Transmit Error"]
     #[inline(always)]
-    pub fn txe(&mut self) -> TxeW<'_, CediagSpec> {
+    pub fn txe(&mut self) -> TxeW<CediagSpec> {
         TxeW::new(self, 10)
     }
     #[doc = "Bit 11 - Stuff Error"]
     #[inline(always)]
-    pub fn stuff(&mut self) -> StuffW<'_, CediagSpec> {
+    pub fn stuff(&mut self) -> StuffW<CediagSpec> {
         StuffW::new(self, 11)
     }
     #[doc = "Bit 12 - CRC"]
     #[inline(always)]
-    pub fn crc(&mut self) -> CrcW<'_, CediagSpec> {
+    pub fn crc(&mut self) -> CrcW<CediagSpec> {
         CrcW::new(self, 12)
     }
     #[doc = "Bit 13 - Monitor"]
     #[inline(always)]
-    pub fn mon(&mut self) -> MonW<'_, CediagSpec> {
+    pub fn mon(&mut self) -> MonW<CediagSpec> {
         MonW::new(self, 13)
     }
     #[doc = "Bit 14 - Drive"]
     #[inline(always)]
-    pub fn drive(&mut self) -> DriveW<'_, CediagSpec> {
+    pub fn drive(&mut self) -> DriveW<CediagSpec> {
         DriveW::new(self, 14)
     }
 }
@@ -114,6 +114,10 @@ impl crate::Readable for CediagSpec {}
 #[doc = "`write(|w| ..)` method takes [`cediag::W`](W) writer structure"]
 impl crate::Writable for CediagSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CEDIAG to value 0"]
-impl crate::Resettable for CediagSpec {}
+impl crate::Resettable for CediagSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cgcr.rs

@@ -115,62 +115,62 @@ impl R {
 impl W {
     #[doc = "Bit 0 - CAN Enable"]
     #[inline(always)]
-    pub fn canen(&mut self) -> CanenW<'_, CgcrSpec> {
+    pub fn canen(&mut self) -> CanenW<CgcrSpec> {
         CanenW::new(self, 0)
     }
     #[doc = "Bit 1 - RW,Control Receive"]
     #[inline(always)]
-    pub fn crx(&mut self) -> CrxW<'_, CgcrSpec> {
+    pub fn crx(&mut self) -> CrxW<CgcrSpec> {
         CrxW::new(self, 1)
     }
     #[doc = "Bit 2 - RW,Control Transmit"]
     #[inline(always)]
-    pub fn ctx(&mut self) -> CtxW<'_, CgcrSpec> {
+    pub fn ctx(&mut self) -> CtxW<CgcrSpec> {
         CtxW::new(self, 2)
     }
     #[doc = "Bit 3 - Buffer Lock"]
     #[inline(always)]
-    pub fn bufflock(&mut self) -> BufflockW<'_, CgcrSpec> {
+    pub fn bufflock(&mut self) -> BufflockW<CgcrSpec> {
         BufflockW::new(self, 3)
     }
     #[doc = "Bit 4 - Time Sync Enable"]
     #[inline(always)]
-    pub fn tstpen(&mut self) -> TstpenW<'_, CgcrSpec> {
+    pub fn tstpen(&mut self) -> TstpenW<CgcrSpec> {
         TstpenW::new(self, 4)
     }
     #[doc = "Bit 5 - Data Direction"]
     #[inline(always)]
-    pub fn ddir(&mut self) -> DdirW<'_, CgcrSpec> {
+    pub fn ddir(&mut self) -> DdirW<CgcrSpec> {
         DdirW::new(self, 5)
     }
     #[doc = "Bit 6 - Listen Only"]
     #[inline(always)]
-    pub fn lo(&mut self) -> LoW<'_, CgcrSpec> {
+    pub fn lo(&mut self) -> LoW<CgcrSpec> {
         LoW::new(self, 6)
     }
     #[doc = "Bit 7 - Ignore Acknowledge"]
     #[inline(always)]
-    pub fn ignack(&mut self) -> IgnackW<'_, CgcrSpec> {
+    pub fn ignack(&mut self) -> IgnackW<CgcrSpec> {
         IgnackW::new(self, 7)
     }
     #[doc = "Bit 8 - Loopback"]
     #[inline(always)]
-    pub fn loopback(&mut self) -> LoopbackW<'_, CgcrSpec> {
+    pub fn loopback(&mut self) -> LoopbackW<CgcrSpec> {
         LoopbackW::new(self, 8)
     }
     #[doc = "Bit 9 - Internal"]
     #[inline(always)]
-    pub fn internal(&mut self) -> InternalW<'_, CgcrSpec> {
+    pub fn internal(&mut self) -> InternalW<CgcrSpec> {
         InternalW::new(self, 9)
     }
     #[doc = "Bit 10 - Diagnostic Enable"]
     #[inline(always)]
-    pub fn diagen(&mut self) -> DiagenW<'_, CgcrSpec> {
+    pub fn diagen(&mut self) -> DiagenW<CgcrSpec> {
         DiagenW::new(self, 10)
     }
     #[doc = "Bit 11 - Error Interrupt Type"]
     #[inline(always)]
-    pub fn eit(&mut self) -> EitW<'_, CgcrSpec> {
+    pub fn eit(&mut self) -> EitW<CgcrSpec> {
         EitW::new(self, 11)
     }
 }
@@ -184,6 +184,10 @@ impl crate::Readable for CgcrSpec {}
 #[doc = "`write(|w| ..)` method takes [`cgcr::W`](W) writer structure"]
 impl crate::Writable for CgcrSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CGCR to value 0"]
-impl crate::Resettable for CgcrSpec {}
+impl crate::Resettable for CgcrSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cicen.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Code Enable\\[14:0\\]"]
     #[inline(always)]
-    pub fn icen(&mut self) -> IcenW<'_, CicenSpec> {
+    pub fn icen(&mut self) -> IcenW<CicenSpec> {
         IcenW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Code Enable"]
     #[inline(always)]
-    pub fn eicen(&mut self) -> EicenW<'_, CicenSpec> {
+    pub fn eicen(&mut self) -> EicenW<CicenSpec> {
         EicenW::new(self, 15)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for CicenSpec {}
 #[doc = "`write(|w| ..)` method takes [`cicen::W`](W) writer structure"]
 impl crate::Writable for CicenSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CICEN to value 0"]
-impl crate::Resettable for CicenSpec {}
+impl crate::Resettable for CicenSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/ciclr.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Clear\\[14:0\\]"]
     #[inline(always)]
-    pub fn iclr(&mut self) -> IclrW<'_, CiclrSpec> {
+    pub fn iclr(&mut self) -> IclrW<CiclrSpec> {
         IclrW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Clear"]
     #[inline(always)]
-    pub fn eiclr(&mut self) -> EiclrW<'_, CiclrSpec> {
+    pub fn eiclr(&mut self) -> EiclrW<CiclrSpec> {
         EiclrW::new(self, 15)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for CiclrSpec {}
 #[doc = "`write(|w| ..)` method takes [`ciclr::W`](W) writer structure"]
 impl crate::Writable for CiclrSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CICLR to value 0"]
-impl crate::Resettable for CiclrSpec {}
+impl crate::Resettable for CiclrSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cien.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Enable\\[14:0\\]"]
     #[inline(always)]
-    pub fn ien(&mut self) -> IenW<'_, CienSpec> {
+    pub fn ien(&mut self) -> IenW<CienSpec> {
         IenW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Enable"]
     #[inline(always)]
-    pub fn eien(&mut self) -> EienW<'_, CienSpec> {
+    pub fn eien(&mut self) -> EienW<CienSpec> {
         EienW::new(self, 15)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for CienSpec {}
 #[doc = "`write(|w| ..)` method takes [`cien::W`](W) writer structure"]
 impl crate::Writable for CienSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CIEN to value 0"]
-impl crate::Resettable for CienSpec {}
+impl crate::Resettable for CienSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cipnd.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:14 - Buffer Interrupt Pending\\[14:0\\]"]
     #[inline(always)]
-    pub fn ipnd(&mut self) -> IpndW<'_, CipndSpec> {
+    pub fn ipnd(&mut self) -> IpndW<CipndSpec> {
         IpndW::new(self, 0)
     }
     #[doc = "Bit 15 - Error Interrupt Pending"]
     #[inline(always)]
-    pub fn eipnd(&mut self) -> EipndW<'_, CipndSpec> {
+    pub fn eipnd(&mut self) -> EipndW<CipndSpec> {
         EipndW::new(self, 15)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for CipndSpec {}
 #[doc = "`write(|w| ..)` method takes [`cipnd::W`](W) writer structure"]
 impl crate::Writable for CipndSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CIPND to value 0"]
-impl crate::Resettable for CipndSpec {}
+impl crate::Resettable for CipndSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb0.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb0Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb0Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb0Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb0Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb0Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb0Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb0Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb0::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb0Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB0 to value 0"]
-impl crate::Resettable for CnstatCmb0Spec {}
+impl crate::Resettable for CnstatCmb0Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb1.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb1Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb1Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb1Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb1Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb1Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb1Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb1Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb1::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb1Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB1 to value 0"]
-impl crate::Resettable for CnstatCmb1Spec {}
+impl crate::Resettable for CnstatCmb1Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb10.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb10Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb10Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb10Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb10Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb10Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb10Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb10Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb10::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb10Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB10 to value 0"]
-impl crate::Resettable for CnstatCmb10Spec {}
+impl crate::Resettable for CnstatCmb10Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb11.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb11Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb11Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb11Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb11Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb11Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb11Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb11Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb11::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb11Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB11 to value 0"]
-impl crate::Resettable for CnstatCmb11Spec {}
+impl crate::Resettable for CnstatCmb11Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb12.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb12Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb12Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb12Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb12Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb12Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb12Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb12Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb12::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb12Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB12 to value 0"]
-impl crate::Resettable for CnstatCmb12Spec {}
+impl crate::Resettable for CnstatCmb12Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb13.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb13Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb13Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb13Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb13Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb13Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb13Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb13Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb13::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb13Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB13 to value 0"]
-impl crate::Resettable for CnstatCmb13Spec {}
+impl crate::Resettable for CnstatCmb13Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb14.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb14Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb14Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb14Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb14Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb14Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb14Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb14Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb14::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb14Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB14 to value 0"]
-impl crate::Resettable for CnstatCmb14Spec {}
+impl crate::Resettable for CnstatCmb14Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb2.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb2Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb2Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb2Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb2Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb2Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb2Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb2Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb2::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb2Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB2 to value 0"]
-impl crate::Resettable for CnstatCmb2Spec {}
+impl crate::Resettable for CnstatCmb2Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb3.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb3Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb3Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb3Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb3Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb3Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb3Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb3Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb3::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb3Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB3 to value 0"]
-impl crate::Resettable for CnstatCmb3Spec {}
+impl crate::Resettable for CnstatCmb3Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb4.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb4Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb4Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb4Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb4Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb4Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb4Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb4Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb4::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb4Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB4 to value 0"]
-impl crate::Resettable for CnstatCmb4Spec {}
+impl crate::Resettable for CnstatCmb4Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb5.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb5Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb5Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb5Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb5Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb5Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb5Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb5Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb5::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb5Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB5 to value 0"]
-impl crate::Resettable for CnstatCmb5Spec {}
+impl crate::Resettable for CnstatCmb5Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb6.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb6Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb6Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb6Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb6Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb6Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb6Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb6Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb6::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb6Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB6 to value 0"]
-impl crate::Resettable for CnstatCmb6Spec {}
+impl crate::Resettable for CnstatCmb6Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb7.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb7Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb7Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb7Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb7Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb7Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb7Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb7Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb7::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb7Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB7 to value 0"]
-impl crate::Resettable for CnstatCmb7Spec {}
+impl crate::Resettable for CnstatCmb7Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb8.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb8Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb8Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb8Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb8Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb8Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb8Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb8Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb8::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb8Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB8 to value 0"]
-impl crate::Resettable for CnstatCmb8Spec {}
+impl crate::Resettable for CnstatCmb8Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_cmb9.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatCmb9Spec> {
+    pub fn st(&mut self) -> StW<CnstatCmb9Spec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatCmb9Spec> {
+    pub fn pri(&mut self) -> PriW<CnstatCmb9Spec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatCmb9Spec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatCmb9Spec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatCmb9Spec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_cmb9::W`](W) writer structure"]
 impl crate::Writable for CnstatCmb9Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_CMB9 to value 0"]
-impl crate::Resettable for CnstatCmb9Spec {}
+impl crate::Resettable for CnstatCmb9Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cnstat_hcmb.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Buffer Status"]
     #[inline(always)]
-    pub fn st(&mut self) -> StW<'_, CnstatHcmbSpec> {
+    pub fn st(&mut self) -> StW<CnstatHcmbSpec> {
         StW::new(self, 0)
     }
     #[doc = "Bits 4:7 - Transmit Priority Code"]
     #[inline(always)]
-    pub fn pri(&mut self) -> PriW<'_, CnstatHcmbSpec> {
+    pub fn pri(&mut self) -> PriW<CnstatHcmbSpec> {
         PriW::new(self, 4)
     }
     #[doc = "Bits 12:15 - Data Length Code"]
     #[inline(always)]
-    pub fn dlc(&mut self) -> DlcW<'_, CnstatHcmbSpec> {
+    pub fn dlc(&mut self) -> DlcW<CnstatHcmbSpec> {
         DlcW::new(self, 12)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CnstatHcmbSpec {}
 #[doc = "`write(|w| ..)` method takes [`cnstat_hcmb::W`](W) writer structure"]
 impl crate::Writable for CnstatHcmbSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CNSTAT_HCMB to value 0"]
-impl crate::Resettable for CnstatHcmbSpec {}
+impl crate::Resettable for CnstatHcmbSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/cstpnd.rs

@@ -34,17 +34,17 @@ impl R {
 impl W {
     #[doc = "Bits 0:3 - Interrupt Source portion of Interrupt Code"]
     #[inline(always)]
-    pub fn ist(&mut self) -> IstW<'_, CstpndSpec> {
+    pub fn ist(&mut self) -> IstW<CstpndSpec> {
         IstW::new(self, 0)
     }
     #[doc = "Bit 4 - Interrupt Request portion of Interrupt Code"]
     #[inline(always)]
-    pub fn irq(&mut self) -> IrqW<'_, CstpndSpec> {
+    pub fn irq(&mut self) -> IrqW<CstpndSpec> {
         IrqW::new(self, 4)
     }
     #[doc = "Bits 5:7 - CAN Node Status"]
     #[inline(always)]
-    pub fn ns(&mut self) -> NsW<'_, CstpndSpec> {
+    pub fn ns(&mut self) -> NsW<CstpndSpec> {
         NsW::new(self, 5)
     }
 }
@@ -58,6 +58,10 @@ impl crate::Readable for CstpndSpec {}
 #[doc = "`write(|w| ..)` method takes [`cstpnd::W`](W) writer structure"]
 impl crate::Writable for CstpndSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CSTPND to value 0"]
-impl crate::Resettable for CstpndSpec {}
+impl crate::Resettable for CstpndSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/ctim.rs

@@ -43,22 +43,22 @@ impl R {
 impl W {
     #[doc = "Bits 0:2 - Time Segment 2"]
     #[inline(always)]
-    pub fn tseg2(&mut self) -> Tseg2W<'_, CtimSpec> {
+    pub fn tseg2(&mut self) -> Tseg2W<CtimSpec> {
         Tseg2W::new(self, 0)
     }
     #[doc = "Bits 3:6 - Time Segment 1"]
     #[inline(always)]
-    pub fn tseg1(&mut self) -> Tseg1W<'_, CtimSpec> {
+    pub fn tseg1(&mut self) -> Tseg1W<CtimSpec> {
         Tseg1W::new(self, 3)
     }
     #[doc = "Bits 7:8 - Synchronization Jump Width"]
     #[inline(always)]
-    pub fn sjw(&mut self) -> SjwW<'_, CtimSpec> {
+    pub fn sjw(&mut self) -> SjwW<CtimSpec> {
         SjwW::new(self, 7)
     }
     #[doc = "Bits 9:15 - Prescaler Configuration"]
     #[inline(always)]
-    pub fn psc(&mut self) -> PscW<'_, CtimSpec> {
+    pub fn psc(&mut self) -> PscW<CtimSpec> {
         PscW::new(self, 9)
     }
 }
@@ -72,6 +72,10 @@ impl crate::Readable for CtimSpec {}
 #[doc = "`write(|w| ..)` method takes [`ctim::W`](W) writer structure"]
 impl crate::Writable for CtimSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CTIM to value 0"]
-impl crate::Resettable for CtimSpec {}
+impl crate::Resettable for CtimSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/ctmr.rs

@@ -22,6 +22,10 @@ impl crate::Readable for CtmrSpec {}
 #[doc = "`write(|w| ..)` method takes [`ctmr::W`](W) writer structure"]
 impl crate::Writable for CtmrSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets CTMR to value 0"]
-impl crate::Resettable for CtmrSpec {}
+impl crate::Resettable for CtmrSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb0.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb0Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb0Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb0Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb0Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb0Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb0::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb0Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB0 to value 0"]
-impl crate::Resettable for Data0Cmb0Spec {}
+impl crate::Resettable for Data0Cmb0Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb1.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb1Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb1Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb1Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb1Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb1Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb1::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb1Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB1 to value 0"]
-impl crate::Resettable for Data0Cmb1Spec {}
+impl crate::Resettable for Data0Cmb1Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb10.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb10Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb10Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb10Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb10Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb10Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb10::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb10Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB10 to value 0"]
-impl crate::Resettable for Data0Cmb10Spec {}
+impl crate::Resettable for Data0Cmb10Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb11.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb11Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb11Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb11Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb11Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb11Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb11::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb11Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB11 to value 0"]
-impl crate::Resettable for Data0Cmb11Spec {}
+impl crate::Resettable for Data0Cmb11Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb12.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb12Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb12Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb12Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb12Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb12Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb12::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb12Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB12 to value 0"]
-impl crate::Resettable for Data0Cmb12Spec {}
+impl crate::Resettable for Data0Cmb12Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb13.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb13Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb13Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb13Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb13Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb13Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb13::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb13Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB13 to value 0"]
-impl crate::Resettable for Data0Cmb13Spec {}
+impl crate::Resettable for Data0Cmb13Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb14.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb14Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb14Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb14Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb14Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb14Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb14::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb14Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB14 to value 0"]
-impl crate::Resettable for Data0Cmb14Spec {}
+impl crate::Resettable for Data0Cmb14Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb2.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb2Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb2Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb2Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb2Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb2Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb2::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb2Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB2 to value 0"]
-impl crate::Resettable for Data0Cmb2Spec {}
+impl crate::Resettable for Data0Cmb2Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb3.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb3Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb3Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb3Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb3Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb3Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb3::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb3Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB3 to value 0"]
-impl crate::Resettable for Data0Cmb3Spec {}
+impl crate::Resettable for Data0Cmb3Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb4.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb4Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb4Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb4Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb4Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb4Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb4::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb4Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB4 to value 0"]
-impl crate::Resettable for Data0Cmb4Spec {}
+impl crate::Resettable for Data0Cmb4Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb5.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb5Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb5Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb5Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb5Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb5Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb5::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb5Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB5 to value 0"]
-impl crate::Resettable for Data0Cmb5Spec {}
+impl crate::Resettable for Data0Cmb5Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb6.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb6Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb6Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb6Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb6Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb6Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb6::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb6Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB6 to value 0"]
-impl crate::Resettable for Data0Cmb6Spec {}
+impl crate::Resettable for Data0Cmb6Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb7.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb7Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb7Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb7Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb7Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb7Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb7::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb7Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB7 to value 0"]
-impl crate::Resettable for Data0Cmb7Spec {}
+impl crate::Resettable for Data0Cmb7Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb8.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb8Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb8Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb8Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb8Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb8Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb8::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb8Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB8 to value 0"]
-impl crate::Resettable for Data0Cmb8Spec {}
+impl crate::Resettable for Data0Cmb8Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_cmb9.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0Cmb9Spec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0Cmb9Spec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0Cmb9Spec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0Cmb9Spec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0Cmb9Spec {}
 #[doc = "`write(|w| ..)` method takes [`data0_cmb9::W`](W) writer structure"]
 impl crate::Writable for Data0Cmb9Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_CMB9 to value 0"]
-impl crate::Resettable for Data0Cmb9Spec {}
+impl crate::Resettable for Data0Cmb9Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data0_hcmb.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 2"]
     #[inline(always)]
-    pub fn byte2(&mut self) -> Byte2W<'_, Data0HcmbSpec> {
+    pub fn byte2(&mut self) -> Byte2W<Data0HcmbSpec> {
         Byte2W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 1"]
     #[inline(always)]
-    pub fn byte1(&mut self) -> Byte1W<'_, Data0HcmbSpec> {
+    pub fn byte1(&mut self) -> Byte1W<Data0HcmbSpec> {
         Byte1W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data0HcmbSpec {}
 #[doc = "`write(|w| ..)` method takes [`data0_hcmb::W`](W) writer structure"]
 impl crate::Writable for Data0HcmbSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA0_HCMB to value 0"]
-impl crate::Resettable for Data0HcmbSpec {}
+impl crate::Resettable for Data0HcmbSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb0.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb0Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb0Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb0Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb0Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb0Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb0::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb0Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB0 to value 0"]
-impl crate::Resettable for Data1Cmb0Spec {}
+impl crate::Resettable for Data1Cmb0Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb1.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb1Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb1Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb1Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb1Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb1Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb1::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb1Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB1 to value 0"]
-impl crate::Resettable for Data1Cmb1Spec {}
+impl crate::Resettable for Data1Cmb1Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb10.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb10Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb10Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb10Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb10Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb10Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb10::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb10Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB10 to value 0"]
-impl crate::Resettable for Data1Cmb10Spec {}
+impl crate::Resettable for Data1Cmb10Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb11.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb11Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb11Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb11Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb11Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb11Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb11::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb11Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB11 to value 0"]
-impl crate::Resettable for Data1Cmb11Spec {}
+impl crate::Resettable for Data1Cmb11Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb12.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb12Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb12Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb12Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb12Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb12Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb12::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb12Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB12 to value 0"]
-impl crate::Resettable for Data1Cmb12Spec {}
+impl crate::Resettable for Data1Cmb12Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb13.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb13Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb13Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb13Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb13Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb13Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb13::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb13Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB13 to value 0"]
-impl crate::Resettable for Data1Cmb13Spec {}
+impl crate::Resettable for Data1Cmb13Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb14.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb14Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb14Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb14Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb14Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb14Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb14::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb14Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB14 to value 0"]
-impl crate::Resettable for Data1Cmb14Spec {}
+impl crate::Resettable for Data1Cmb14Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb2.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb2Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb2Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb2Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb2Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb2Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb2::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb2Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB2 to value 0"]
-impl crate::Resettable for Data1Cmb2Spec {}
+impl crate::Resettable for Data1Cmb2Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb3.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb3Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb3Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb3Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb3Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb3Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb3::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb3Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB3 to value 0"]
-impl crate::Resettable for Data1Cmb3Spec {}
+impl crate::Resettable for Data1Cmb3Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb4.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb4Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb4Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb4Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb4Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb4Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb4::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb4Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB4 to value 0"]
-impl crate::Resettable for Data1Cmb4Spec {}
+impl crate::Resettable for Data1Cmb4Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb5.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb5Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb5Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb5Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb5Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb5Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb5::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb5Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB5 to value 0"]
-impl crate::Resettable for Data1Cmb5Spec {}
+impl crate::Resettable for Data1Cmb5Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb6.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb6Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb6Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb6Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb6Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb6Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb6::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb6Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB6 to value 0"]
-impl crate::Resettable for Data1Cmb6Spec {}
+impl crate::Resettable for Data1Cmb6Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb7.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb7Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb7Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb7Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb7Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb7Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb7::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb7Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB7 to value 0"]
-impl crate::Resettable for Data1Cmb7Spec {}
+impl crate::Resettable for Data1Cmb7Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb8.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb8Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb8Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb8Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb8Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb8Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb8::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb8Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB8 to value 0"]
-impl crate::Resettable for Data1Cmb8Spec {}
+impl crate::Resettable for Data1Cmb8Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_cmb9.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1Cmb9Spec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1Cmb9Spec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1Cmb9Spec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1Cmb9Spec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1Cmb9Spec {}
 #[doc = "`write(|w| ..)` method takes [`data1_cmb9::W`](W) writer structure"]
 impl crate::Writable for Data1Cmb9Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_CMB9 to value 0"]
-impl crate::Resettable for Data1Cmb9Spec {}
+impl crate::Resettable for Data1Cmb9Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data1_hcmb.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 4"]
     #[inline(always)]
-    pub fn byte4(&mut self) -> Byte4W<'_, Data1HcmbSpec> {
+    pub fn byte4(&mut self) -> Byte4W<Data1HcmbSpec> {
         Byte4W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 3"]
     #[inline(always)]
-    pub fn byte3(&mut self) -> Byte3W<'_, Data1HcmbSpec> {
+    pub fn byte3(&mut self) -> Byte3W<Data1HcmbSpec> {
         Byte3W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data1HcmbSpec {}
 #[doc = "`write(|w| ..)` method takes [`data1_hcmb::W`](W) writer structure"]
 impl crate::Writable for Data1HcmbSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA1_HCMB to value 0"]
-impl crate::Resettable for Data1HcmbSpec {}
+impl crate::Resettable for Data1HcmbSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb0.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb0Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb0Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb0Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb0Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb0Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb0::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb0Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB0 to value 0"]
-impl crate::Resettable for Data2Cmb0Spec {}
+impl crate::Resettable for Data2Cmb0Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb1.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb1Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb1Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb1Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb1Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb1Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb1::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb1Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB1 to value 0"]
-impl crate::Resettable for Data2Cmb1Spec {}
+impl crate::Resettable for Data2Cmb1Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb10.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb10Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb10Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb10Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb10Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb10Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb10::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb10Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB10 to value 0"]
-impl crate::Resettable for Data2Cmb10Spec {}
+impl crate::Resettable for Data2Cmb10Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb11.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb11Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb11Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb11Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb11Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb11Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb11::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb11Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB11 to value 0"]
-impl crate::Resettable for Data2Cmb11Spec {}
+impl crate::Resettable for Data2Cmb11Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb12.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb12Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb12Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb12Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb12Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb12Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb12::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb12Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB12 to value 0"]
-impl crate::Resettable for Data2Cmb12Spec {}
+impl crate::Resettable for Data2Cmb12Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb13.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb13Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb13Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb13Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb13Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb13Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb13::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb13Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB13 to value 0"]
-impl crate::Resettable for Data2Cmb13Spec {}
+impl crate::Resettable for Data2Cmb13Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb14.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb14Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb14Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb14Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb14Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb14Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb14::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb14Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB14 to value 0"]
-impl crate::Resettable for Data2Cmb14Spec {}
+impl crate::Resettable for Data2Cmb14Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb2.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb2Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb2Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb2Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb2Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb2Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb2::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb2Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB2 to value 0"]
-impl crate::Resettable for Data2Cmb2Spec {}
+impl crate::Resettable for Data2Cmb2Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb3.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb3Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb3Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb3Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb3Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb3Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb3::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb3Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB3 to value 0"]
-impl crate::Resettable for Data2Cmb3Spec {}
+impl crate::Resettable for Data2Cmb3Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb4.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb4Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb4Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb4Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb4Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb4Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb4::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb4Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB4 to value 0"]
-impl crate::Resettable for Data2Cmb4Spec {}
+impl crate::Resettable for Data2Cmb4Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb5.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb5Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb5Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb5Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb5Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb5Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb5::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb5Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB5 to value 0"]
-impl crate::Resettable for Data2Cmb5Spec {}
+impl crate::Resettable for Data2Cmb5Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb6.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb6Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb6Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb6Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb6Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb6Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb6::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb6Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB6 to value 0"]
-impl crate::Resettable for Data2Cmb6Spec {}
+impl crate::Resettable for Data2Cmb6Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb7.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb7Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb7Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb7Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb7Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb7Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb7::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb7Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB7 to value 0"]
-impl crate::Resettable for Data2Cmb7Spec {}
+impl crate::Resettable for Data2Cmb7Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb8.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb8Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb8Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb8Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb8Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb8Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb8::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb8Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB8 to value 0"]
-impl crate::Resettable for Data2Cmb8Spec {}
+impl crate::Resettable for Data2Cmb8Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_cmb9.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2Cmb9Spec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2Cmb9Spec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2Cmb9Spec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2Cmb9Spec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2Cmb9Spec {}
 #[doc = "`write(|w| ..)` method takes [`data2_cmb9::W`](W) writer structure"]
 impl crate::Writable for Data2Cmb9Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_CMB9 to value 0"]
-impl crate::Resettable for Data2Cmb9Spec {}
+impl crate::Resettable for Data2Cmb9Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data2_hcmb.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 6"]
     #[inline(always)]
-    pub fn byte6(&mut self) -> Byte6W<'_, Data2HcmbSpec> {
+    pub fn byte6(&mut self) -> Byte6W<Data2HcmbSpec> {
         Byte6W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 5"]
     #[inline(always)]
-    pub fn byte5(&mut self) -> Byte5W<'_, Data2HcmbSpec> {
+    pub fn byte5(&mut self) -> Byte5W<Data2HcmbSpec> {
         Byte5W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data2HcmbSpec {}
 #[doc = "`write(|w| ..)` method takes [`data2_hcmb::W`](W) writer structure"]
 impl crate::Writable for Data2HcmbSpec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA2_HCMB to value 0"]
-impl crate::Resettable for Data2HcmbSpec {}
+impl crate::Resettable for Data2HcmbSpec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data3_cmb0.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 8"]
     #[inline(always)]
-    pub fn byte8(&mut self) -> Byte8W<'_, Data3Cmb0Spec> {
+    pub fn byte8(&mut self) -> Byte8W<Data3Cmb0Spec> {
         Byte8W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 7"]
     #[inline(always)]
-    pub fn byte7(&mut self) -> Byte7W<'_, Data3Cmb0Spec> {
+    pub fn byte7(&mut self) -> Byte7W<Data3Cmb0Spec> {
         Byte7W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data3Cmb0Spec {}
 #[doc = "`write(|w| ..)` method takes [`data3_cmb0::W`](W) writer structure"]
 impl crate::Writable for Data3Cmb0Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA3_CMB0 to value 0"]
-impl crate::Resettable for Data3Cmb0Spec {}
+impl crate::Resettable for Data3Cmb0Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data3_cmb1.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 8"]
     #[inline(always)]
-    pub fn byte8(&mut self) -> Byte8W<'_, Data3Cmb1Spec> {
+    pub fn byte8(&mut self) -> Byte8W<Data3Cmb1Spec> {
         Byte8W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 7"]
     #[inline(always)]
-    pub fn byte7(&mut self) -> Byte7W<'_, Data3Cmb1Spec> {
+    pub fn byte7(&mut self) -> Byte7W<Data3Cmb1Spec> {
         Byte7W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data3Cmb1Spec {}
 #[doc = "`write(|w| ..)` method takes [`data3_cmb1::W`](W) writer structure"]
 impl crate::Writable for Data3Cmb1Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA3_CMB1 to value 0"]
-impl crate::Resettable for Data3Cmb1Spec {}
+impl crate::Resettable for Data3Cmb1Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data3_cmb10.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 8"]
     #[inline(always)]
-    pub fn byte8(&mut self) -> Byte8W<'_, Data3Cmb10Spec> {
+    pub fn byte8(&mut self) -> Byte8W<Data3Cmb10Spec> {
         Byte8W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 7"]
     #[inline(always)]
-    pub fn byte7(&mut self) -> Byte7W<'_, Data3Cmb10Spec> {
+    pub fn byte7(&mut self) -> Byte7W<Data3Cmb10Spec> {
         Byte7W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data3Cmb10Spec {}
 #[doc = "`write(|w| ..)` method takes [`data3_cmb10::W`](W) writer structure"]
 impl crate::Writable for Data3Cmb10Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA3_CMB10 to value 0"]
-impl crate::Resettable for Data3Cmb10Spec {}
+impl crate::Resettable for Data3Cmb10Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data3_cmb11.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 8"]
     #[inline(always)]
-    pub fn byte8(&mut self) -> Byte8W<'_, Data3Cmb11Spec> {
+    pub fn byte8(&mut self) -> Byte8W<Data3Cmb11Spec> {
         Byte8W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 7"]
     #[inline(always)]
-    pub fn byte7(&mut self) -> Byte7W<'_, Data3Cmb11Spec> {
+    pub fn byte7(&mut self) -> Byte7W<Data3Cmb11Spec> {
         Byte7W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data3Cmb11Spec {}
 #[doc = "`write(|w| ..)` method takes [`data3_cmb11::W`](W) writer structure"]
 impl crate::Writable for Data3Cmb11Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA3_CMB11 to value 0"]
-impl crate::Resettable for Data3Cmb11Spec {}
+impl crate::Resettable for Data3Cmb11Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data3_cmb12.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 8"]
     #[inline(always)]
-    pub fn byte8(&mut self) -> Byte8W<'_, Data3Cmb12Spec> {
+    pub fn byte8(&mut self) -> Byte8W<Data3Cmb12Spec> {
         Byte8W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 7"]
     #[inline(always)]
-    pub fn byte7(&mut self) -> Byte7W<'_, Data3Cmb12Spec> {
+    pub fn byte7(&mut self) -> Byte7W<Data3Cmb12Spec> {
         Byte7W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data3Cmb12Spec {}
 #[doc = "`write(|w| ..)` method takes [`data3_cmb12::W`](W) writer structure"]
 impl crate::Writable for Data3Cmb12Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA3_CMB12 to value 0"]
-impl crate::Resettable for Data3Cmb12Spec {}
+impl crate::Resettable for Data3Cmb12Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data3_cmb13.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 8"]
     #[inline(always)]
-    pub fn byte8(&mut self) -> Byte8W<'_, Data3Cmb13Spec> {
+    pub fn byte8(&mut self) -> Byte8W<Data3Cmb13Spec> {
         Byte8W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 7"]
     #[inline(always)]
-    pub fn byte7(&mut self) -> Byte7W<'_, Data3Cmb13Spec> {
+    pub fn byte7(&mut self) -> Byte7W<Data3Cmb13Spec> {
         Byte7W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data3Cmb13Spec {}
 #[doc = "`write(|w| ..)` method takes [`data3_cmb13::W`](W) writer structure"]
 impl crate::Writable for Data3Cmb13Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA3_CMB13 to value 0"]
-impl crate::Resettable for Data3Cmb13Spec {}
+impl crate::Resettable for Data3Cmb13Spec {
+    const RESET_VALUE: u32 = 0;
+}

va416xx/src/can0/data3_cmb14.rs

@@ -25,12 +25,12 @@ impl R {
 impl W {
     #[doc = "Bits 0:7 - Data Byte 8"]
     #[inline(always)]
-    pub fn byte8(&mut self) -> Byte8W<'_, Data3Cmb14Spec> {
+    pub fn byte8(&mut self) -> Byte8W<Data3Cmb14Spec> {
         Byte8W::new(self, 0)
     }
     #[doc = "Bits 8:15 - Data Byte 7"]
     #[inline(always)]
-    pub fn byte7(&mut self) -> Byte7W<'_, Data3Cmb14Spec> {
+    pub fn byte7(&mut self) -> Byte7W<Data3Cmb14Spec> {
         Byte7W::new(self, 8)
     }
 }
@@ -44,6 +44,10 @@ impl crate::Readable for Data3Cmb14Spec {}
 #[doc = "`write(|w| ..)` method takes [`data3_cmb14::W`](W) writer structure"]
 impl crate::Writable for Data3Cmb14Spec {
     type Safety = crate::Unsafe;
+    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
+    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
 }
 #[doc = "`reset()` method sets DATA3_CMB14 to value 0"]
-impl crate::Resettable for Data3Cmb14Spec {}
+impl crate::Resettable for Data3Cmb14Spec {
+    const RESET_VALUE: u32 = 0;
+}