Robin Mueller
c9c701c98f
Some checks failed
Rust/va416xx-rs/pipeline/pr-main There was a failure building this commit
67 lines
2.1 KiB
Markdown
67 lines
2.1 KiB
Markdown
VA416xx Flashloader Application
|
|
========
|
|
|
|
This flashloader shows a minimal example for a self-updatable Rust software which exposes
|
|
a simple PUS (CCSDS) interface to update the software. It also provides a Python application
|
|
called the `image-loader.py` which can be used to upload compiled images to the flashloader
|
|
application to write them to the NVM.
|
|
|
|
Please note that the both the application and the image loader are tailored towards usage
|
|
with the [bootloader provided by this repository](https://egit.irs.uni-stuttgart.de/rust/va416xx-rs/src/branch/main/bootloader).
|
|
|
|
The software can quickly be adapted to interface with a real primary on-board software instead of
|
|
the Python script provided here to upload images because it uses a low-level CCSDS based packet
|
|
interface.
|
|
|
|
## Using the Python image loader
|
|
|
|
The Python image loader communicates with the Rust flashload application using a dedicated serial
|
|
port with a baudrate of 115200.
|
|
|
|
It is recommended to run the script in a dedicated virtual environment. For example, on UNIX
|
|
systems you can use `python3 -m venv venv` and then `source venv/bin/activate` to create
|
|
and activate a virtual environment.
|
|
|
|
After that, you can use
|
|
|
|
```sh
|
|
pip install -r requirements.txt
|
|
```
|
|
|
|
to install all required dependencies.
|
|
|
|
After that, it is recommended to use `./image-load.py -h` to get an overview of some options.
|
|
The flash loader uses the UART0 interface of the VA416xx board to perform CCSDS based
|
|
communication. The Python image loader application will search for a file named `loader.toml` and
|
|
use the `serial_port` key to determine the serial port to use for serial communication.
|
|
|
|
### Examples
|
|
|
|
You can use
|
|
|
|
```sh
|
|
./image-loader.py -p
|
|
```
|
|
|
|
to send a ping an verify the connection.
|
|
|
|
You can use
|
|
|
|
```sh
|
|
cd flashloader/slot-a-blinky
|
|
cargo build --release
|
|
cd ../..
|
|
./image-loader.py -t a ./slot-a-blinky/target/thumbv7em-none-eabihf/release/slot-a-blinky
|
|
```
|
|
|
|
to build the slot A sample application and upload it to a running flash loader application
|
|
to write it to slot A.
|
|
|
|
You can use
|
|
|
|
```sh
|
|
./image-loader.py -c -t a
|
|
```
|
|
|
|
to corrupt the image A and test that it switches to image B after a failed CRC check instead.
|