Merge pull request #2 from robamu-org/mueller/gpio-refactoring

Update to v0.1.1

Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "vorago-reb1"
-version = "0.1.0"
+version = "0.1.1"
 authors = ["Robin Mueller <robin.mueller.m@gmail.com>"]
 edition = "2021"
 description = "Board Support Crate for the Vorago REB1 development board"
@@ -20,5 +20,5 @@ panic-rtt-target = { version = "0.1", features = ["cortex-m"] }
 rtt-target = { version = "0.3", features = ["cortex-m"] }
 
 [dependencies.va108xx-hal]
-version = "0.1"
+version = "0.2"
 features = ["rt"]

README.md

@@ -25,6 +25,12 @@ you can build the blinky example with
 cargo build --example blinky-leds
 ```
 
+If you have not done this yet, it is recommended to read some of the excellent resources
+available to learn Rust:
+
+- [Rust Embedded Book](https://docs.rust-embedded.org/book/)
+- [Rust Discovery Book](https://docs.rust-embedded.org/discovery/)
+
 ## Flashing from the command line
 
 A `jlink.gdb` file is provided to allow flashing of the board from the command line.

examples/blinky-leds.rs

@@ -9,7 +9,7 @@
 use cortex_m_rt::entry;
 use embedded_hal::digital::v2::ToggleableOutputPin;
 use panic_halt as _;
-use va108xx_hal::{pac, prelude::*};
+use va108xx_hal::{gpio::pins::PinsA, pac, prelude::*};
 use vorago_reb1::leds::Leds;
 
 // REB LED pin definitions. All on port A
@@ -27,7 +27,7 @@ enum LibType {
 #[entry]
 fn main() -> ! {
     let mut dp = pac::Peripherals::take().unwrap();
-    let porta = dp.PORTA.split(&mut dp.SYSCONFIG).unwrap();
+
     let lib_type = LibType::Bsp;
 
     match lib_type {
@@ -60,15 +60,10 @@ fn main() -> ! {
             }
         }
         LibType::Hal => {
-            let mut led1 = porta
+            let pins = PinsA::new(&mut dp.SYSCONFIG, Some(dp.IOCONFIG), dp.PORTA);
-                .pa10
+            let mut led1 = pins.pa10.into_push_pull_output();
-                .into_push_pull_output(&mut dp.IOCONFIG, &mut dp.PORTA);
+            let mut led2 = pins.pa7.into_push_pull_output();
-            let mut led2 = porta
+            let mut led3 = pins.pa6.into_push_pull_output();
-                .pa7
-                .into_push_pull_output(&mut dp.IOCONFIG, &mut dp.PORTA);
-            let mut led3 = porta
-                .pa6
-                .into_push_pull_output(&mut dp.IOCONFIG, &mut dp.PORTA);
             for _ in 0..10 {
                 led1.set_low().ok();
                 led2.set_low().ok();
@@ -89,7 +84,7 @@ fn main() -> ! {
             }
         }
         LibType::Bsp => {
-            let mut leds = Leds::new(porta, &mut dp.IOCONFIG, &mut dp.PORTA);
+            let mut leds = Leds::new(PinsA::new(&mut dp.SYSCONFIG, Some(dp.IOCONFIG), dp.PORTA));
             loop {
                 for _ in 0..10 {
                     // Blink all LEDs quickly

src/leds.rs

@@ -1,25 +1,22 @@
 use va108xx_hal::{
-    gpio::{
+    gpio::dynpins::DynPin,
-        porta::{Parts, PA10, PA6, PA7},
+    gpio::pins::{Pin, PinsA, PushPullOutput, PA10, PA6, PA7},
-        Output, Pin, PushPull,
-    },
-    pac::{IOCONFIG, PORTA},
     prelude::*,
 };
 
-pub type LD2 = PA10<Output<PushPull>>;
+pub type LD2 = Pin<PA10, PushPullOutput>;
-pub type LD3 = PA7<Output<PushPull>>;
+pub type LD3 = Pin<PA7, PushPullOutput>;
-pub type LD4 = PA6<Output<PushPull>>;
+pub type LD4 = Pin<PA6, PushPullOutput>;
 
 pub struct Leds {
     leds: [Led; 3],
 }
 
 impl Leds {
-    pub fn new(led_parts: Parts, iocfg: &mut IOCONFIG, porta: &mut PORTA) -> Self {
+    pub fn new(led_parts: PinsA) -> Self {
-        let led2 = led_parts.pa10.into_push_pull_output(iocfg, porta);
+        let led2 = led_parts.pa10.into_push_pull_output();
-        let led3 = led_parts.pa7.into_push_pull_output(iocfg, porta);
+        let led3 = led_parts.pa7.into_push_pull_output();
-        let led4 = led_parts.pa6.into_push_pull_output(iocfg, porta);
+        let led4 = led_parts.pa6.into_push_pull_output();
         Leds {
             leds: [led2.into(), led3.into(), led4.into()],
         }
@@ -55,7 +52,7 @@ impl core::ops::IndexMut<usize> for Leds {
 }
 
 pub struct Led {
-    pin: Pin<Output<PushPull>>,
+    pin: DynPin,
 }
 
 macro_rules! ctor {
@@ -64,7 +61,7 @@ macro_rules! ctor {
 			impl From<$ldx> for Led {
 				fn from(led: $ldx) -> Self {
 					Led {
-						pin: led.downgrade(),
+						pin: led.into()
 					}
 				}
 			}