This repository has been archived on 2024-06-16. You can view files and clone it, but cannot push or open issues or pull requests.
vorago-reb1/examples/adxl343-accelerometer.rs
Robin Mueller a912dd3971
preparations for v0.3.0
- Relicensing as Apache-2.0 only
- Baseline BSP with all core features
2021-12-12 14:31:26 +01:00

90 lines
2.4 KiB
Rust

//! ADXL343 accelerometer example
//!
//! Please note that the default REB1 board is not populated with the ADXL343BCCZ-RL7.
//! To use this example, this chip needs to be soldered onto the board.
#![no_main]
#![no_std]
use cortex_m_rt::entry;
use embedded_hal::spi;
use panic_rtt_target as _;
use rtt_target::{rprintln, rtt_init_print};
use va108xx_hal::{
gpio::PinsA,
pac::{self, interrupt},
prelude::*,
spi::{Spi, SpiConfig, TransferConfig},
timer::{default_ms_irq_handler, set_up_ms_timer, Delay},
};
const READ_MASK: u8 = 1 << 7;
const _MULTI_BYTE_MASK: u8 = 1 << 6;
const DEVID_REG: u8 = 0x00;
const POWER_CTL_REG: u8 = 0x2D;
const PWR_MEASUREMENT_MODE_MASK: u8 = 1 << 3;
#[entry]
fn main() -> ! {
rtt_init_print!();
rprintln!("-- Vorago Accelerometer Example --");
let mut dp = pac::Peripherals::take().unwrap();
let tim0 = set_up_ms_timer(
&mut dp.SYSCONFIG,
&mut dp.IRQSEL,
50.mhz().into(),
dp.TIM0,
interrupt::OC0,
);
let mut delay = Delay::new(tim0);
unsafe {
cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC0);
}
let pinsa = PinsA::new(&mut dp.SYSCONFIG, None, dp.PORTA);
let spi_cfg = SpiConfig::default();
let (sck, mosi, miso) = (
pinsa.pa20.into_funsel_2(),
pinsa.pa19.into_funsel_2(),
pinsa.pa18.into_funsel_2(),
);
let cs_pin = pinsa.pa16.into_funsel_2();
// Need to set the ADC chip select low
let mut adc_cs = pinsa.pa17.into_push_pull_output();
adc_cs
.set_high()
.expect("Setting ADC chip select high failed");
let transfer_cfg = TransferConfig::new(1.mhz(), spi::MODE_3, Some(cs_pin), false, true);
let mut spi = Spi::spib(
dp.SPIB,
(sck, miso, mosi),
50.mhz(),
spi_cfg,
Some(&mut dp.SYSCONFIG),
Some(&transfer_cfg.downgrade()),
);
let mut send_buf: [u8; 3] = [0; 3];
send_buf[0] = READ_MASK | DEVID_REG;
let reply = spi
.transfer(&mut send_buf[0..2])
.expect("Reading DEVID register failed");
rprintln!("DEVID register: {}", reply[1]);
send_buf[0] = POWER_CTL_REG;
send_buf[1] = PWR_MEASUREMENT_MODE_MASK;
spi.write(&send_buf[0..2])
.expect("Enabling measurement mode failed");
loop {
delay.delay_ms(500);
unimplemented!("Not implemented for now, is not populated on the board..");
}
}
#[interrupt]
fn OC0() {
default_ms_irq_handler();
}