continue fsbl

examples/embassy/src/bin/dht22-open-drain-pins.rs

@@ -137,7 +137,7 @@ async fn main(_spawner: Spawner) -> ! {
         info!("Flex Pin 0 state (should be low): {}", flex_pin_0.is_high());
     }
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let mut ticker = Ticker::every(Duration::from_millis(1000));

examples/embassy/src/bin/logger-non-blocking.rs

@@ -75,7 +75,7 @@ async fn main(spawner: Spawner) -> ! {
 
     zynq7000_hal::log::rb::init(log::LevelFilter::Trace);
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let led = Output::new_for_mio(mio_pins.mio7, PinState::Low);

examples/embassy/src/bin/pwm.rs

@@ -91,7 +91,7 @@ async fn main(_spawner: Spawner) -> ! {
         )
     };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let mut ticker = Ticker::every(Duration::from_millis(1000));

examples/embassy/src/main.rs

@@ -77,7 +77,7 @@ async fn main(_spawner: Spawner) -> ! {
         )
     };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let mut ticker = Ticker::every(Duration::from_millis(1000));

examples/simple/src/bin/logger.rs

@@ -79,7 +79,7 @@ pub fn main() -> ! {
         )
     };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {boot_mode:?}");
 
     let mut led = Output::new_for_mio(mio_pins.mio7, PinState::Low);

examples/simple/src/main.rs

@@ -64,22 +64,22 @@ pub fn main() -> ! {
 #[zynq7000_rt::irq]
 pub fn irq_handler() {}
 
-#[unsafe(no_mangle)]
-pub extern "C" fn _abort_handler() {
+#[zynq7000_rt::exception(DataAbort)]
+fn data_abort_handler(_faulting_addr: usize) -> ! {
     loop {
         nop();
     }
 }
 
-#[unsafe(no_mangle)]
-pub extern "C" fn _undefined_handler() {
+#[zynq7000_rt::exception(Undefined)]
+fn undefined_handler(_faulting_addr: usize) -> ! {
     loop {
         nop();
     }
 }
 
-#[unsafe(no_mangle)]
-pub extern "C" fn _prefetch_handler() {
+#[zynq7000_rt::exception(PrefetchAbort)]
+fn prefetch_handler(_faulting_addr: usize) -> ! {
     loop {
         nop();
     }

examples/zedboard/src/bin/ethernet.rs

@@ -250,7 +250,7 @@ async fn main(spawner: Spawner) -> ! {
     // Safety: We are not multi-threaded yet.
     unsafe { zynq7000_hal::log::uart_blocking::init_unsafe_single_core(uart, LOG_LEVEL, false) };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     static ETH_RX_BUFS: static_cell::ConstStaticCell<[AlignedBuffer; NUM_RX_SLOTS]> =

examples/zedboard/src/bin/l3gd20h-i2c-mio.rs

@@ -93,7 +93,7 @@ async fn main(_spawner: Spawner) -> ! {
         )
     };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let pin_sel = match I2C_ADDR_SEL {

examples/zedboard/src/bin/l3gd20h-spi-mio.rs

@@ -96,7 +96,7 @@ async fn main(spawner: Spawner) -> ! {
         .unwrap();
     zynq7000_hal::log::rb::init(log::LevelFilter::Trace);
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     if DEBUG_SPI_CLK_CONFIG {

examples/zedboard/src/bin/uart-blocking.rs

@@ -160,7 +160,7 @@ async fn main(_spawner: Spawner) -> ! {
         )
     };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let mut ticker = Ticker::every(Duration::from_millis(1000));

examples/zedboard/src/bin/uart-non-blocking.rs

@@ -254,7 +254,7 @@ async fn main(spawner: Spawner) -> ! {
         )
     };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let mio_led = Output::new_for_mio(gpio_pins.mio.mio7, PinState::Low);

examples/zedboard/src/main.rs

@@ -79,7 +79,7 @@ async fn main(_spawner: Spawner) -> ! {
         )
     };
 
-    let boot_mode = BootMode::new();
+    let boot_mode = BootMode::new_from_regs();
     info!("Boot mode: {:?}", boot_mode);
 
     let mut ticker = Ticker::every(Duration::from_millis(200));