eive-obsw/bsp_te0720_1cfa/ObjectFactory.cpp

#include "ObjectFactory.h"

#include <devConf.h>
#include "fsfw_hal/linux/uart/UartComIF.h"
#include "fsfw_hal/linux/i2c/I2cComIF.h"
#include "fsfw_hal/linux/uart/UartCookie.h"

#include "OBSWConfig.h"
#include "busConf.h"
#include "devConf.h"
#include "fsfw/datapoollocal/LocalDataPoolManager.h"
#include "fsfw/tmtcpacket/pus/tm.h"
#include "fsfw/tmtcservices/CommandingServiceBase.h"
#include "fsfw/tmtcservices/PusServiceBase.h"
#include "fsfw_hal/linux/i2c/I2cCookie.h"
#include "linux/devices/ploc/PlocMPSoCHandler.h"
#include "linux/devices/ploc/PlocMPSoCHelper.h"
#include "mission/devices/Tmp1075Handler.h"
#include "mission/core/GenericFactory.h"
#include "mission/utility/TmFunnel.h"
#include "test/gpio/DummyGpioIF.h"
#include "objects/systemObjectList.h"
#include "devices/addresses.h"
#include "devices/gpioIds.h"
#include "tmtc/apid.h"
#include "tmtc/pusIds.h"

void Factory::setStaticFrameworkObjectIds() {
  PusServiceBase::packetSource = objects::PUS_PACKET_DISTRIBUTOR;
  PusServiceBase::packetDestination = objects::TM_FUNNEL;

  CommandingServiceBase::defaultPacketSource = objects::PUS_PACKET_DISTRIBUTOR;
  CommandingServiceBase::defaultPacketDestination = objects::TM_FUNNEL;

  TmFunnel::downlinkDestination = objects::TMTC_BRIDGE;
  TmFunnel::storageDestination = objects::NO_OBJECT;

  VerificationReporter::messageReceiver = objects::PUS_SERVICE_1_VERIFICATION;
  TmPacketBase::timeStamperId = objects::TIME_STAMPER;
}

void ObjectFactory::produce(void* args) {
  Factory::setStaticFrameworkObjectIds();
  ObjectFactory::produceGenericObjects();

#if OBSW_ADD_PLOC_MPSOC == 1
  UartCookie* mpsocUartCookie = new UartCookie(objects::PLOC_MPSOC_HANDLER, te0720_1cfa::MPSOC_UART,
                                               uart::PLOC_MPSOC_BAUD, mpsoc::MAX_REPLY_SIZE);
  mpsocUartCookie->setNoFixedSizeReply();
  PlocMPSoCHelper* plocMpsocHelper = new PlocMPSoCHelper(objects::PLOC_MPSOC_HELPER);
  new UartComIF(objects::UART_COM_IF);
  auto dummyGpioIF = new DummyGpioIF();
  PlocMPSoCHandler* plocMPSoCHandler = new PlocMPSoCHandler(
      objects::PLOC_MPSOC_HANDLER, objects::UART_COM_IF, mpsocUartCookie, plocMpsocHelper,
      Gpio(gpioIds::ENABLE_MPSOC_UART, dummyGpioIF), objects::PLOC_SUPERVISOR_HANDLER);
  plocMPSoCHandler->setStartUpImmediately();
#endif /* OBSW_ADD_PLOC_MPSOC == 1 */

#if OBSW_TEST_LIBGPIOD == 1
#if OBSW_TEST_GPIO_OPEN_BYLABEL == 1
  /* Configure MIO0 as input */
  GpiodRegular* testGpio = new GpiodRegular("MIO0", Direction::OUT, 0, "/amba_pl/gpio@41200000", 0);
#elif OBSW_TEST_GPIO_OPEN_BY_LINE_NAME
  GpiodRegularByLineName* testGpio =
      new GpiodRegularByLineName("test-name", "gpio-test", Direction::OUT, 0);
#else
  /* Configure MIO0 as input */
  GpiodRegular* testGpio = new GpiodRegular("gpiochip0", 0, "MIO0", gpio::IN, 0);
#endif /* OBSW_TEST_GPIO_LABEL == 1 */
  GpioCookie* gpioCookie = new GpioCookie;
  gpioCookie->addGpio(gpioIds::TEST_ID_0, testGpio);
  new LibgpiodTest(objects::LIBGPIOD_TEST, objects::GPIO_IF, gpioCookie);
#endif

#if OBSW_TEST_SUS == 1
  GpioCookie* gpioCookieSus = new GpioCookie;
  GpiodRegular* chipSelectSus = new GpiodRegular(
      std::string("gpiochip1"), 9, std::string("Chip Select Sus Sensor"), Direction::OUT, 1);
  gpioCookieSus->addGpio(gpioIds::CS_SUS_0, chipSelectSus);
  gpioComIF->addGpios(gpioCookieSus);

  SpiCookie* spiCookieSus =
      new SpiCookie(addresses::SUS_0, std::string("/dev/spidev1.0"), SUS::MAX_CMD_SIZE,
                    spi::DEFAULT_MAX_1227_MODE, spi::DEFAULT_MAX_1227_SPEED);

  new SusHandler(objects::SUS_0, objects::SPI_COM_IF, spiCookieSus, gpioComIF, gpioIds::CS_SUS_0);
#endif

#if OBSW_TEST_CCSDS_BRIDGE == 1
  GpioCookie* gpioCookieCcsdsIp = new GpioCookie;
  GpiodRegular* papbBusyN =
      new GpiodRegular(std::string("gpiochip0"), 0, std::string("PAPBBusy_VC0"));
  gpioCookieCcsdsIp->addGpio(gpioIds::PAPB_BUSY_N, papbBusyN);
  GpiodRegular* papbEmpty =
      new GpiodRegular(std::string("gpiochip0"), 1, std::string("PAPBEmpty_VC0"));
  gpioCookieCcsdsIp->addGpio(gpioIds::PAPB_EMPTY, papbEmpty);
  gpioComIF->addGpios(gpioCookieCcsdsIp);

  new CCSDSIPCoreBridge(objects::CCSDS_IP_CORE_BRIDGE, objects::CCSDS_PACKET_DISTRIBUTOR,
                        objects::TM_STORE, objects::TC_STORE, gpioComIF, std::string("/dev/uio0"),
                        gpioIds::PAPB_BUSY_N, gpioIds::PAPB_EMPTY);
#endif

#if OBSW_TEST_RAD_SENSOR == 1
  GpioCookie* gpioCookieRadSensor = new GpioCookie;
  GpiodRegular* chipSelectRadSensor = new GpiodRegular(
      std::string("gpiochip1"), 0, std::string("Chip select radiation sensor"), Direction::OUT, 1);
  gpioCookieRadSensor->addGpio(gpioIds::CS_RAD_SENSOR, chipSelectRadSensor);
  gpioComIF->addGpios(gpioCookieRadSensor);

  SpiCookie* spiCookieRadSensor =
      new SpiCookie(addresses::RAD_SENSOR, gpioIds::CS_RAD_SENSOR, std::string("/dev/spidev1.0"),
                    SUS::MAX_CMD_SIZE, spi::DEFAULT_MAX_1227_MODE, spi::DEFAULT_MAX_1227_SPEED);

  RadiationSensorHandler* radSensor =
      new RadiationSensorHandler(objects::RAD_SENSOR, objects::SPI_COM_IF, spiCookieRadSensor);
  radSensor->setStartUpImmediately();
#endif

#if OBSW_TEST_TE7020_HEATER == 1
  /* Configuration for MIO0 on TE0720-03-1CFA */
  GpiodRegular* heaterGpio =
      new GpiodRegular(std::string("gpiochip0"), 0, std::string("MIO0"), gpio::IN, 0);
  GpioCookie* gpioCookie = new GpioCookie;
  gpioCookie->addGpio(gpioIds::HEATER_0, heaterGpio);
  new HeaterHandler(objects::HEATER_HANDLER, objects::GPIO_IF, gpioCookie, objects::PCDU_HANDLER,
                    pcduSwitches::TCS_BOARD_8V_HEATER_IN);
#endif

#if OBSW_ADD_PLOC_SUPERVISOR == 1
  /* Configuration for MIO0 on TE0720-03-1CFA */
  UartCookie* plocSupervisorCookie =
      new UartCookie(objects::PLOC_SUPERVISOR_HANDLER, std::string("/dev/ttyPS1"),
                     UartModes::NON_CANONICAL, 115200, PLOC_SPV::MAX_PACKET_SIZE * 20);
  plocSupervisorCookie->setNoFixedSizeReply();
  PlocSupervisorHandler* plocSupervisor = new PlocSupervisorHandler(
      objects::PLOC_SUPERVISOR_HANDLER, objects::UART_COM_IF, plocSupervisorCookie);
  plocSupervisor->setStartUpImmediately();
#endif

new I2cComIF(objects::I2C_COM_IF);

I2cCookie* i2cCookieTmp1075tcs1 =
  new I2cCookie(addresses::TMP1075_TCS_1, TMP1075::MAX_REPLY_LENGTH, std::string("/dev/i2c-0"));
I2cCookie* i2cCookieTmp1075tcs2 =
  new I2cCookie(addresses::TMP1075_TCS_2, TMP1075::MAX_REPLY_LENGTH, std::string("/dev/i2c-0"));

/* Temperature sensors */
new Tmp1075Handler(objects::TMP1075_HANDLER_1, objects::I2C_COM_IF, i2cCookieTmp1075tcs1);
new Tmp1075Handler(objects::TMP1075_HANDLER_2, objects::I2C_COM_IF, i2cCookieTmp1075tcs2);
}