eive/eive-obsw
eive/eive-obsw
12
3
Fork 0
Code Issues 3 Pull Requests 1 Releases 119 Wiki Activity

reamde update

Browse Source
This commit is contained in:
Robin Müller 2020-12-30 10:37:01 +01:00 committed by Robin Mueller
parent 3ae4a45166
commit 48620b1f91
1 changed files with 9 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
README.md
View File

@ -135,13 +135,14 @@ The [TCF agent](https://wiki.eclipse.org/TCF) can be used to perform remote debu
1. Install the TCF agent plugin in Eclipse from the [releases](https://www.eclipse.org/tcf/downloads.php). Go to Help → Install New Software and use the download page, for example https://download.eclipse.org/tools/tcf/releases/1.6/1.6.2/ to search for the plugin and install it.
2. Go to Window → Perspective → Open Perspective and open the **Target Explorer Perspective**. Here, the Raspberry Pi should show up if the TCF agent has been set up on the Raspberry Pi as specified [here](https://wiki.eclipse.org/TCF/Raspberry_Pi) or in the respective [README](README-rpi.md#top). Connect to it.
2. Go to Window → Perspective → Open Perspective and open the **Target Explorer Perspective**.
Here, the Q7S should show up if the local port forwarding was set up as explained previously.
3. A launch configuration was provided, but it might be necessary to adapt it for your own needs. Alternatively:
- Create a new **TCF Remote Application** by pressing the cogs button at the top or going to Run → Debug Configurations → Remote Application and creating a new one there.
- Set up the correct image in the main tab (it might be necessary to send it the the Raspberry Pi manually once) and file transfer properties
- Set up the correct image in the main tab (it might be necessary to send the image to the Q7S manually once) and file transfer properties
- It is also recommended to link the correct Eclipse project.
@ -271,9 +272,14 @@ ssh -L 1534:192.168.133.10:1534 eive@2001:7c0:2018:1099:babe:0:e1fe:f1a5
```
This forwards any requests to localhost:1534 to the port 1534 of the Q7S with the IP address 192.168.133.10.
This needs to be done every time, so it is recommended to create an alias to do this quickly.
Note: When now setting up a debug session in the Xilinx SDK, the host must be set to localhost instead of the IP address of the Q7S.
## Transfering files via SCP
## Launching an application after boot
Load the root partiton from the flash memory (there are to nor-flash memories and each flash holds two xdi images).