Merge branch 'develop' into feature_allow_quicker_transition

CHANGELOG.md

@@ -22,6 +22,10 @@ will consitute of a breaking change warranting a new major release:
 - Allow quicker transition for the EIVE system component by allowing consecutive TCS and ACS
   component commanding again.
 
+## Fixed
+
+- IMTQ: Sets were filled with wrong data, e.g. Raw MTM was filled with calibrated MTM measurements.
+
 # [v1.33.0]
 
 eive-tmtc: v2.16.2

mission/controller/AcsController.cpp

@@ -661,7 +661,6 @@ void AcsController::announceMode(bool recursive) {
 }
 
 void AcsController::copyMgmData() {
-  ACS::SensorValues sensorValues;
   {
     PoolReadGuard pg(&sensorValues.mgm0Lis3Set);
     if (pg.getReadResult() == returnvalue::OK) {
@@ -806,7 +805,6 @@ void AcsController::copySusData() {
 }
 
 void AcsController::copyGyrData() {
-  ACS::SensorValues sensorValues;
   {
     PoolReadGuard pg(&sensorValues.gyr0AdisSet);
     if (pg.getReadResult() == returnvalue::OK) {

mission/devices/ImtqHandler.cpp

@@ -312,7 +312,7 @@ ReturnValue_t ImtqHandler::interpretDeviceReply(DeviceCommandId_t id, const uint
     uint8_t* rawMgmMeasurement = replies.getRawMgmMeasurement();
     result = parseStatusByte(imtq::CC::GET_RAW_MTM_MEASUREMENT, rawMgmMeasurement);
     if (result == returnvalue::OK) {
-      fillRawMtmDataset(rawMgmMeasurement);
+      fillRawMtmDataset(rawMtmNoTorque, rawMgmMeasurement);
     } else {
       status = result;
     }
@@ -323,7 +323,7 @@ ReturnValue_t ImtqHandler::interpretDeviceReply(DeviceCommandId_t id, const uint
     uint8_t* calibMgmMeasurement = replies.getCalibMgmMeasurement();
     result = parseStatusByte(imtq::CC::GET_CAL_MTM_MEASUREMENT, calibMgmMeasurement);
     if (result == returnvalue::OK) {
-      fillRawMtmDataset(calibMgmMeasurement);
+      fillCalibratedMtmDataset(calibMgmMeasurement);
     } else {
       status = result;
     }
@@ -345,7 +345,7 @@ ReturnValue_t ImtqHandler::interpretDeviceReply(DeviceCommandId_t id, const uint
     uint8_t* rawMgmMeasurement = replies.getRawMgmMeasurement();
     result = parseStatusByte(imtq::CC::GET_RAW_MTM_MEASUREMENT, rawMgmMeasurement);
     if (result == returnvalue::OK) {
-      fillRawMtmDataset(rawMgmMeasurement);
+      fillRawMtmDataset(rawMtmWithTorque, rawMgmMeasurement);
     } else {
       status = result;
     }
@@ -361,7 +361,7 @@ ReturnValue_t ImtqHandler::interpretDeviceReply(DeviceCommandId_t id, const uint
     } else {
       status = result;
     }
-    fillEngHkDataset(hkDatasetNoTorque, engHkReply);
+    fillEngHkDataset(hkDatasetWithTorque, engHkReply);
     if (firstReplyCycle) {
       firstReplyCycle = false;
     }
@@ -847,8 +847,11 @@ void ImtqHandler::fillCalibratedMtmDataset(const uint8_t* packet) {
   }
 }
 
-void ImtqHandler::fillRawMtmDataset(const uint8_t* packet) {
-  PoolReadGuard rg(&rawMtmNoTorque);
+void ImtqHandler::fillRawMtmDataset(imtq::RawMtmMeasurementSet& set, const uint8_t* packet) {
+  PoolReadGuard rg(&set);
+  if(rg.getReadResult() != returnvalue::OK) {
+    sif::error << "ImtqHandler::fillRawMtmDataset: Lock failure" << std::endl;
+  }
   unsigned int offset = 2;
   size_t deSerLen = 16;
   const uint8_t* dataStart = packet + offset;
@@ -876,18 +879,18 @@ void ImtqHandler::fillRawMtmDataset(const uint8_t* packet) {
   if (res != returnvalue::OK) {
     return;
   }
-  rawMtmNoTorque.mtmRawNt[0] = xRaw * 7.5;
-  rawMtmNoTorque.mtmRawNt[1] = yRaw * 7.5;
-  rawMtmNoTorque.mtmRawNt[2] = zRaw * 7.5;
-  rawMtmNoTorque.coilActuationStatus = static_cast<uint8_t>(coilActStatus);
-  rawMtmNoTorque.setValidity(true, true);
+  set.mtmRawNt[0] = static_cast<float>(xRaw) * 7.5;
+  set.mtmRawNt[1] = static_cast<float>(yRaw) * 7.5;
+  set.mtmRawNt[2] = static_cast<float>(zRaw) * 7.5;
+  set.coilActuationStatus = static_cast<uint8_t>(coilActStatus);
+  set.setValidity(true, true);
   if (debugMode) {
 #if OBSW_VERBOSE_LEVEL >= 1
-    sif::info << "IMTQ raw MTM measurement X: " << rawMtmNoTorque.mtmRawNt[0] << " nT" << std::endl;
-    sif::info << "IMTQ raw MTM measurement Y: " << rawMtmNoTorque.mtmRawNt[1] << " nT" << std::endl;
-    sif::info << "IMTQ raw MTM measurement Z: " << rawMtmNoTorque.mtmRawNt[2] << " nT" << std::endl;
+    sif::info << "IMTQ raw MTM measurement X: " << set.mtmRawNt[0] << " nT" << std::endl;
+    sif::info << "IMTQ raw MTM measurement Y: " << set.mtmRawNt[1] << " nT" << std::endl;
+    sif::info << "IMTQ raw MTM measurement Z: " << set.mtmRawNt[2] << " nT" << std::endl;
     sif::info << "IMTQ coil actuation status during MTM measurement: "
-              << (unsigned int)rawMtmNoTorque.coilActuationStatus.value << std::endl;
+              << (unsigned int)set.coilActuationStatus.value << std::endl;
 #endif
   }
 }

mission/devices/ImtqHandler.h

@@ -159,7 +159,7 @@ class ImtqHandler : public DeviceHandlerBase {
    * @param packet    Pointer to the reply data requested with the GET_RAW_MTM_MEASUREMENTS
    *                  command.
    */
-  void fillRawMtmDataset(const uint8_t* packet);
+  void fillRawMtmDataset(imtq::RawMtmMeasurementSet& set, const uint8_t* packet);
 
   /**
    * @brief   This function handles all self test results. This comprises parsing the error byte

mission/devices/MgmRm3100CustomHandler.cpp

@@ -91,6 +91,7 @@ ReturnValue_t MgmRm3100CustomHandler::interpretDeviceReply(DeviceCommandId_t id,
     }
 
     PoolReadGuard pg(&primaryDataset);
+    primaryDataset.setValidity(true, true);
     for (uint8_t idx = 0; idx < 3; idx++) {
       primaryDataset.fieldStrengths[idx] = reply->mgmValuesRaw[idx] * reply->scaleFactors[idx];
     }

tmtc

@@ -1 +1 @@
-Subproject commit 350ffda6c61b76dc9a6bbf08cec168c29c08136f
+Subproject commit e5eb2e479c6d2ec71e440c0e72cef75a6f43f441