Merge remote-tracking branch 'origin/v2.1.0-dev' into ploc_mpsoc_read_file_2
Some checks failed
EIVE/eive-obsw/pipeline/pr-v2.1.0-dev There was a failure building this commit

This commit is contained in:
Robin Müller 2023-05-15 10:15:16 +02:00
commit af77d083fa
No known key found for this signature in database
GPG Key ID: 11D4952C8CCEF814
11 changed files with 127 additions and 48 deletions

View File

@ -34,10 +34,12 @@ will consitute of a breaking change warranting a new major release:
on the same system.
- Add ACS board for EM by default now.
- Add support for MPSoC HK packet.
- Add support for MPSoC Flash Directory Content Report.
- Dynamically enable and disable HK packets for MPSoC on `ON` and `OFF` commands.
- Add support for MPSoC Flash Directory Content Report.
- Larger allowed path and file sizes for STR and PLOC MPSoC modules.
- More robust MPSoC flash read and write command data handling.
- Increase frequency of payload handlers from 0.8 seconds to 0.5 seconds.
## Added
@ -51,6 +53,13 @@ will consitute of a breaking change warranting a new major release:
16505 type.
- Host build is working again. Added reduced live TM helper which schedules the PUS and CFDP
funnel.
- PLOC Supervisor handler now has a power switcher assigned to make PLOC power switching work
without an additional PCDU power switch command.
- The PLOC Supervisor handler now waits for the replies to the `SET_TIME` command to verify working
communication.
- The PLOC MPSoC now waits 10 cycles before going to on. These wait cycles are necessary because
the MPSoC is not ready to process commands without this additional boot time.
- Fixed correction for `GPS Altitude` in case the sensor data is out of the expected bonds.
# [v2.0.5] 2023-05-11

View File

@ -644,6 +644,7 @@ void ObjectFactory::createPayloadComponents(LinuxLibgpioIF* gpioComIF, PowerSwit
auto* supvHandler = new PlocSupervisorHandler(objects::PLOC_SUPERVISOR_HANDLER, supervisorCookie,
Gpio(gpioIds::ENABLE_SUPV_UART, gpioComIF),
power::PDU1_CH6_PLOC_12V, *supvHelper);
supvHandler->setPowerSwitcher(&pwrSwitch);
supvHandler->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
#endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */
static_cast<void>(consumer);

View File

@ -366,7 +366,7 @@ void scheduling::initTasks() {
#endif /* OBSW_ADD_PLOC_SUPERVISOR */
PeriodicTaskIF* plTask = factory->createPeriodicTask(
"PL_TASK", 25, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.8, missedDeadlineFunc, &RR_SCHEDULING);
"PL_TASK", 25, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.5, missedDeadlineFunc, &RR_SCHEDULING);
plTask->addComponent(objects::CAM_SWITCHER);
scheduling::addMpsocSupvHandlers(plTask);
scheduling::scheduleScexDev(plTask);

View File

@ -52,12 +52,12 @@ void ObjectFactory::produce(void* args) {
// level components.
dummy::DummyCfg dummyCfg;
dummyCfg.addCoreCtrlCfg = false;
dummyCfg.addCamSwitcherDummy = false;
#if OBSW_ADD_SYRLINKS == 1
dummyCfg.addSyrlinksDummies = false;
#endif
#if OBSW_ADD_PLOC_SUPERVISOR == 1 || OBSW_ADD_PLOC_MPSOC == 1
dummyCfg.addPlocDummies = false;
dummyCfg.addCamSwitcherDummy = false;
#endif
#if OBSW_ADD_GOMSPACE_PCDU == 1
dummyCfg.addPowerDummies = false;

View File

@ -1,3 +1,4 @@
#include <fsfw/globalfunctions/arrayprinter.h>
#include <linux/payload/PlocMpsocHandler.h>
#include <linux/payload/plocSupvDefs.h>
@ -104,6 +105,7 @@ void PlocMPSoCHandler::performOperationHook() {
ReturnValue_t PlocMPSoCHandler::executeAction(ActionId_t actionId, MessageQueueId_t commandedBy,
const uint8_t* data, size_t size) {
ReturnValue_t result = returnvalue::OK;
commandIsPending = true;
switch (actionId) {
case mpsoc::SET_UART_TX_TRISTATE: {
uartIsolatorSwitch.pullLow();
@ -165,32 +167,47 @@ ReturnValue_t PlocMPSoCHandler::executeAction(ActionId_t actionId, MessageQueueI
}
void PlocMPSoCHandler::doStartUp() {
if (startupState == StartupState::IDLE) {
startupState = StartupState::HW_INIT;
}
if (startupState == StartupState::HW_INIT) {
#ifdef XIPHOS_Q7S
#if not OBSW_MPSOC_JTAG_BOOT == 1
switch (powerState) {
case PowerState::OFF:
commandActionHelper.commandAction(supervisorHandler, supv::START_MPSOC);
powerState = PowerState::BOOTING;
break;
case PowerState::ON:
hkReport.setReportingEnabled(true);
setMode(_MODE_TO_ON);
uartIsolatorSwitch.pullHigh();
break;
default:
break;
}
switch (powerState) {
case PowerState::OFF:
commandActionHelper.commandAction(supervisorHandler, supv::START_MPSOC);
powerState = PowerState::BOOTING;
return;
case PowerState::ON:
uartIsolatorSwitch.pullHigh();
startupState = StartupState::WAIT_CYCLES;
break;
default:
return;
}
#else
powerState = PowerState::ON;
hkReport.setReportingEnabled(true);
setMode(_MODE_TO_ON);
uartIsolatorSwitch.pullHigh();
uartIsolatorSwitch.pullHigh();
startupState = StartupState::WAIT_CYCLES;
#endif /* not MSPOC_JTAG_BOOT == 1 */
#else
powerState = PowerState::ON;
hkReport.setReportingEnabled(true);
setMode(_MODE_TO_ON);
startupState = StartupState::WAIT_CYCLES;
powerState = PowerState::ON;
#endif /* XIPHOS_Q7S */
}
// Need to wait, MPSoC still not booted properly, requesting HK without these wait cycles does
// not work, no replies..
if (startupState == StartupState::WAIT_CYCLES) {
waitCycles++;
if (waitCycles >= 8) {
startupState = StartupState::DONE;
waitCycles = 0;
}
}
if (startupState == StartupState::DONE) {
setMode(_MODE_TO_ON);
hkReport.setReportingEnabled(true);
startupState = StartupState::IDLE;
}
}
void PlocMPSoCHandler::doShutDown() {
@ -218,11 +235,16 @@ void PlocMPSoCHandler::doShutDown() {
powerState = PowerState::OFF;
#endif
#endif
startupState = StartupState::IDLE;
}
ReturnValue_t PlocMPSoCHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
*id = mpsoc::TC_GET_HK_REPORT;
return buildCommandFromCommand(*id, nullptr, 0);
if (not commandIsPending) {
*id = mpsoc::TC_GET_HK_REPORT;
commandIsPending = true;
return buildCommandFromCommand(*id, nullptr, 0);
}
return NOTHING_TO_SEND;
}
ReturnValue_t PlocMPSoCHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
@ -345,9 +367,9 @@ void PlocMPSoCHandler::fillCommandAndReplyMap() {
this->insertInReplyMap(mpsoc::ACK_REPORT, 3, nullptr, mpsoc::SIZE_ACK_REPORT);
this->insertInReplyMap(mpsoc::EXE_REPORT, 3, nullptr, mpsoc::SIZE_EXE_REPORT);
this->insertInReplyMap(mpsoc::TM_MEMORY_READ_REPORT, 2, nullptr, mpsoc::SIZE_TM_MEM_READ_REPORT);
this->insertInReplyMap(mpsoc::TM_GET_HK_REPORT, 2, nullptr, mpsoc::SIZE_TM_HK_REPORT);
this->insertInReplyMap(mpsoc::TM_GET_HK_REPORT, 5, nullptr, mpsoc::SIZE_TM_HK_REPORT);
this->insertInReplyMap(mpsoc::TM_CAM_CMD_RPT, 2, nullptr, mpsoc::SP_MAX_SIZE);
this->insertInReplyMap(mpsoc::TM_FLASH_DIRECTORY_CONTENT, 2, nullptr, 0);
this->insertInReplyMap(mpsoc::TM_FLASH_DIRECTORY_CONTENT, 2, nullptr, mpsoc::SP_MAX_SIZE);
}
ReturnValue_t PlocMPSoCHandler::scanForReply(const uint8_t* start, size_t remainingSize,
@ -403,13 +425,14 @@ ReturnValue_t PlocMPSoCHandler::scanForReply(const uint8_t* start, size_t remain
*foundId = mpsoc::EXE_REPORT;
break;
default: {
sif::debug << "PlocMPSoCHandler::scanForReply: Reply has invalid apid" << std::endl;
sif::debug << "PlocMPSoCHandler::scanForReply: Reply has invalid APID 0x" << std::hex
<< std::setfill('0') << std::setw(2) << apid << std::dec << std::endl;
*foundLen = remainingSize;
return MPSoCReturnValuesIF::INVALID_APID;
}
}
uint16_t recvSeqCnt = (*(start + 2) << 8 | *(start + 3)) & PACKET_SEQUENCE_COUNT_MASK;
uint16_t recvSeqCnt = ((*(start + 2) << 8) | *(start + 3)) & PACKET_SEQUENCE_COUNT_MASK;
if (recvSeqCnt != sequenceCount) {
triggerEvent(MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH, sequenceCount, recvSeqCnt);
sequenceCount = recvSeqCnt;
@ -469,13 +492,14 @@ void PlocMPSoCHandler::setNormalDatapoolEntriesInvalid() {
hkReport.setValidity(false, true);
}
uint32_t PlocMPSoCHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 5000; }
uint32_t PlocMPSoCHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 10000; }
ReturnValue_t PlocMPSoCHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
LocalDataPoolManager& poolManager) {
localDataPoolMap.emplace(mpsoc::poolid::STATUS, &peStatus);
localDataPoolMap.emplace(mpsoc::poolid::MODE, &peMode);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_PWR_ON, &peDownlinkPwrOn);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_REPLY_ACTIIVE, &peDownlinkReplyActive);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_JESD_SYNC_STATUS, &peDownlinkJesdSyncStatus);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_DAC_STATUS, &peDownlinkDacStatus);
localDataPoolMap.emplace(mpsoc::poolid::CAM_STATUS, &peCameraStatus);
@ -493,6 +517,7 @@ ReturnValue_t PlocMPSoCHandler::initializeLocalDataPool(localpool::DataPool& loc
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_MB3V3, &peSysmonMb3V3);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_MB1V8, &peSysmonMb1V8);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC12V, &peSysmonVcc12V);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC5V, &peSysmonVcc5V);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC3V3, &peSysmonVcc3V3);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC3V3VA, &peSysmonVcc3V3VA);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC2V5DDR, &peSysmonVcc2V5DDR);
@ -611,13 +636,12 @@ ReturnValue_t PlocMPSoCHandler::prepareTcDownlinkPwrOff() {
}
ReturnValue_t PlocMPSoCHandler::prepareTcGetHkReport() {
ReturnValue_t result = returnvalue::OK;
mpsoc::TcGetHkReport tcDownlinkPwrOff(spParams, sequenceCount);
result = tcDownlinkPwrOff.buildPacket();
mpsoc::TcGetHkReport tcGetHkReport(spParams, sequenceCount);
ReturnValue_t result = tcGetHkReport.buildPacket();
if (result != returnvalue::OK) {
return result;
}
finishTcPrep(tcDownlinkPwrOff.getFullPacketLen());
finishTcPrep(tcGetHkReport.getFullPacketLen());
return returnvalue::OK;
}
@ -793,8 +817,23 @@ ReturnValue_t PlocMPSoCHandler::handleExecutionReport(const uint8_t* data) {
uint16_t apid = (*(data) << 8 | *(data + 1)) & APID_MASK;
auto cmdDoneHandler = [&](bool success) {
if (normalCmdPending) {
normalCmdPending = false;
}
commandIsPending = false;
auto commandIter = deviceCommandMap.find(getPendingCommand());
if (commandIter != deviceCommandMap.end()) {
commandIter->second.isExecuting = false;
if (commandIter->second.sendReplyTo != MessageQueueIF::NO_QUEUE) {
actionHelper.finish(success, commandIter->second.sendReplyTo, getPendingCommand(), result);
}
}
disableAllReplies();
};
switch (apid) {
case (mpsoc::apid::EXE_SUCCESS): {
cmdDoneHandler(true);
break;
}
case (mpsoc::apid::EXE_FAILURE): {
@ -810,8 +849,8 @@ ReturnValue_t PlocMPSoCHandler::handleExecutionReport(const uint8_t* data) {
}
printStatus(data);
sendFailureReport(mpsoc::EXE_REPORT, MPSoCReturnValuesIF::RECEIVED_EXE_FAILURE);
disableExeReportReply();
result = IGNORE_REPLY_DATA;
cmdDoneHandler(false);
break;
}
default: {
@ -1159,6 +1198,14 @@ void PlocMPSoCHandler::setNextReplyId() {
case mpsoc::TC_MEM_READ:
nextReplyId = mpsoc::TM_MEMORY_READ_REPORT;
break;
case mpsoc::TC_FLASH_GET_DIRECTORY_CONTENT: {
nextReplyId = mpsoc::TM_FLASH_DIRECTORY_CONTENT;
break;
}
case mpsoc::TC_GET_HK_REPORT: {
nextReplyId = mpsoc::TM_GET_HK_REPORT;
break;
}
default:
/* If no telemetry is expected the next reply is always the execution report */
nextReplyId = mpsoc::EXE_REPORT;
@ -1387,12 +1434,12 @@ void PlocMPSoCHandler::disableExeReportReply() {
}
void PlocMPSoCHandler::printStatus(const uint8_t* data) {
uint16_t status = *(data + STATUS_OFFSET) << 8 | *(data + STATUS_OFFSET + 1);
uint16_t status = (*(data + STATUS_OFFSET) << 8) | *(data + STATUS_OFFSET + 1);
sif::info << "Verification report status: " << getStatusString(status) << std::endl;
}
uint16_t PlocMPSoCHandler::getStatus(const uint8_t* data) {
return *(data + STATUS_OFFSET) << 8 | *(data + STATUS_OFFSET + 1);
return (*(data + STATUS_OFFSET) << 8) | *(data + STATUS_OFFSET + 1);
}
void PlocMPSoCHandler::handleActionCommandFailure(ActionId_t actionId) {

View File

@ -108,6 +108,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
mpsoc::HkReport hkReport;
bool normalCmdPending = false;
MessageQueueIF* eventQueue = nullptr;
MessageQueueIF* commandActionHelperQueue = nullptr;
@ -117,7 +118,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
SpacePacketCreator creator;
ploc::SpTcParams spParams = ploc::SpTcParams(creator);
PoolEntry<uint8_t> peStatus = PoolEntry<uint8_t>();
PoolEntry<uint32_t> peStatus = PoolEntry<uint32_t>();
PoolEntry<uint8_t> peMode = PoolEntry<uint8_t>();
PoolEntry<uint8_t> peDownlinkPwrOn = PoolEntry<uint8_t>();
PoolEntry<uint8_t> peDownlinkReplyActive = PoolEntry<uint8_t>();
@ -168,6 +169,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
// Used to block incoming commands when MPSoC helper class is currently executing a command
bool plocMPSoCHelperExecuting = false;
bool commandIsPending = false;
struct TmMemReadReport {
static const uint8_t FIX_SIZE = 14;
@ -183,7 +185,9 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
size_t foundPacketLen = 0;
TelemetryBuffer tmBuffer;
uint32_t waitCycles = 0;
enum class StartupState { IDLE, HW_INIT, WAIT_CYCLES, DONE } startupState = StartupState::IDLE;
enum class PowerState { OFF, BOOTING, SHUTDOWN, ON };
PowerState powerState = PowerState::OFF;

View File

@ -151,7 +151,7 @@ void PlocSupervisorHandler::doStartUp() {
}
}
}
if (startupState == StartupState::SET_TIME_EXECUTING) {
if (startupState == StartupState::TIME_WAS_SET) {
startupState = StartupState::ON;
}
if (startupState == StartupState::ON) {
@ -176,7 +176,7 @@ ReturnValue_t PlocSupervisorHandler::buildNormalDeviceCommand(DeviceCommandId_t*
ReturnValue_t PlocSupervisorHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
if (startupState == StartupState::SET_TIME) {
*id = supv::SET_TIME_REF;
startupState = StartupState::SET_TIME_EXECUTING;
startupState = StartupState::WAIT_FOR_TIME_REPLY;
return buildCommandFromCommand(*id, nullptr, 0);
}
return NOTHING_TO_SEND;
@ -1909,6 +1909,10 @@ ReturnValue_t PlocSupervisorHandler::handleExecutionSuccessReport(ExecutionRepor
case supv::SET_TIME_REF: {
// We could only allow proper bootup when the time was set successfully, but
// this makes debugging difficult.
if (startupState == StartupState::WAIT_FOR_TIME_REPLY) {
startupState = StartupState::TIME_WAS_SET;
}
break;
}
default:

View File

@ -99,7 +99,14 @@ class PlocSupervisorHandler : public DeviceHandlerBase {
static const uint32_t MRAM_DUMP_TIMEOUT = 60000;
// 4 s
static const uint32_t BOOT_TIMEOUT = 4000;
enum class StartupState : uint8_t { OFF, BOOTING, SET_TIME, SET_TIME_EXECUTING, ON };
enum class StartupState : uint8_t {
OFF,
BOOTING,
SET_TIME,
WAIT_FOR_TIME_REPLY,
TIME_WAS_SET,
ON
};
static constexpr bool SET_TIME_DURING_BOOT = true;

View File

@ -85,7 +85,6 @@ static const DeviceCommandId_t TC_FLASH_GET_DIRECTORY_CONTENT = 28;
static const DeviceCommandId_t TM_FLASH_DIRECTORY_CONTENT = 29;
static constexpr DeviceCommandId_t TC_FLASH_READ_FULL_FILE = 30;
// Will reset the sequence count of the OBSW
static const DeviceCommandId_t OBSW_RESET_SEQ_COUNT = 50;
@ -128,7 +127,10 @@ static const uint16_t ACK_FAILURE = 0x401;
static const uint16_t EXE_SUCCESS = 0x402;
static const uint16_t EXE_FAILURE = 0x403;
static const uint16_t TM_MEMORY_READ_REPORT = 0x404;
<<<<<<< HEAD
static const uint16_t TM_FLASH_READ_REPORT = 0x405;
=======
>>>>>>> origin/v2.1.0-dev
static constexpr uint16_t TM_FLASH_DIRECTORY_CONTENT = 0x406;
static const uint16_t TM_CAM_CMD_RPT = 0x407;
static constexpr uint16_t TM_HK_GET_REPORT = 0x408;
@ -660,9 +662,6 @@ class TcDownlinkPwrOn : public TcBase {
}
};
/**
* @brief Class to build replay stop space packet.
*/
class TcGetHkReport : public TcBase {
public:
TcGetHkReport(ploc::SpTcParams params, uint16_t sequenceCount)
@ -676,12 +675,21 @@ class TcGetDirContent : public TcBase {
ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) {
ReturnValue_t result = returnvalue::OK;
<<<<<<< HEAD
spParams.setFullPayloadLen(commandDataLen + sizeof(NULL_TERMINATOR) + CRC_SIZE);
=======
// Yeah it needs to be 256.. even if the path is shorter.
spParams.setFullPayloadLen(256 + CRC_SIZE);
>>>>>>> origin/v2.1.0-dev
if (result != returnvalue::OK) {
return result;
}
std::memcpy(payloadStart, commandData, commandDataLen);
<<<<<<< HEAD
*(payloadStart + commandDataLen) = NULL_TERMINATOR;
=======
payloadStart[255] = '\0';
>>>>>>> origin/v2.1.0-dev
return result;
}
};
@ -987,8 +995,7 @@ class HkReport : public StaticLocalDataSet<36> {
lp_var_t<uint16_t>(sid.objectId, mpsoc::poolid::SEM_UNCORRECTABLE_ERRS, this);
lp_var_t<uint16_t> semCorrectableErrs =
lp_var_t<uint16_t>(sid.objectId, mpsoc::poolid::SEM_CORRECTABLE_ERRS, this);
lp_var_t<uint8_t> semStatus =
lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::SEM_CORRECTABLE_ERRS, this);
lp_var_t<uint8_t> semStatus = lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::SEM_STATUS, this);
lp_var_t<uint8_t> rebootMpsocRequired =
lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::REBOOT_MPSOC_REQUIRED, this);
};

View File

@ -573,7 +573,7 @@ void SensorProcessing::processGps(const double gpsLatitude, const double gpsLong
// Altitude FDIR
if (gpsAltitude > gpsParameters->maximumFdirAltitude ||
gpsAltitude < gpsParameters->maximumFdirAltitude) {
gpsAltitude < gpsParameters->minimumFdirAltitude) {
altitude = gpsParameters->fdirAltitude;
} else {
altitude = gpsAltitude;

2
tmtc

@ -1 +1 @@
Subproject commit 13fd9a7d84645535496e9ff2855118e5d0b59916
Subproject commit dd3e4c649b687ea6b9444389439f3f2d5a558ad2