eive/eive-obsw
eive/eive-obsw
12
3
Fork 0
Code Issues 3 Pull Requests Releases 118 Wiki Activity

Merge branch 'main-v6' into live-channel-bugfix
All checks were successful
EIVE/eive-obsw/pipeline/pr-main-v6 This commit looks good
Details

Browse Source
This commit is contained in:
Robin Müller 2023-06-29 08:55:09 +02:00
commit ba36b5f091
8 changed files with 34 additions and 149 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
CMakeLists.txt
View File

@ -9,8 +9,8 @@
# ##############################################################################
cmake_minimum_required(VERSION 3.13)
set(OBSW_VERSION_MAJOR 5)
set(OBSW_VERSION_MINOR 1)
set(OBSW_VERSION_MAJOR 6)
set(OBSW_VERSION_MINOR 0)
set(OBSW_VERSION_REVISION 0)
# set(CMAKE_VERBOSE TRUE)

4
bsp_q7s/boardconfig/busConf.h
View File

@ -85,13 +85,9 @@ static constexpr char EN_RW_4[] = "enable_rw_4";
static constexpr char RAD_SENSOR_CHIP_SELECT[] = "rad_sensor_chip_select";
static constexpr char ENABLE_RADFET[] = "enable_radfet";
static constexpr char PAPB_BUSY_SIGNAL_VC0[] = "papb_busy_signal_vc0";
static constexpr char PAPB_EMPTY_SIGNAL_VC0[] = "papb_empty_signal_vc0";
static constexpr char PAPB_BUSY_SIGNAL_VC1[] = "papb_busy_signal_vc1";
static constexpr char PAPB_EMPTY_SIGNAL_VC1[] = "papb_empty_signal_vc1";
static constexpr char PAPB_BUSY_SIGNAL_VC2[] = "papb_busy_signal_vc2";
static constexpr char PAPB_EMPTY_SIGNAL_VC2[] = "papb_empty_signal_vc2";
static constexpr char PAPB_BUSY_SIGNAL_VC3[] = "papb_busy_signal_vc3";
static constexpr char PAPB_EMPTY_SIGNAL_VC3[] = "papb_empty_signal_vc3";
static constexpr char PTME_RESETN[] = "ptme_resetn";

29
bsp_q7s/core/ObjectFactory.cpp
View File

@ -731,20 +731,12 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
// GPIO definitions of signals connected to the virtual channel interfaces of the PTME IP Core
GpioCookie* gpioCookiePtmeIp = new GpioCookie;
GpiodRegularByLineName* gpio = nullptr;
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC0, "PAPB VC0");
gpioCookiePtmeIp->addGpio(gpioIds::VC0_PAPB_BUSY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC0, "PAPB VC0");
gpioCookiePtmeIp->addGpio(gpioIds::VC0_PAPB_EMPTY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC1, "PAPB VC1");
gpioCookiePtmeIp->addGpio(gpioIds::VC1_PAPB_BUSY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC1, "PAPB VC1");
gpioCookiePtmeIp->addGpio(gpioIds::VC1_PAPB_EMPTY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC2, "PAPB VC2");
gpioCookiePtmeIp->addGpio(gpioIds::VC2_PAPB_BUSY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC2, "PAPB VC2");
gpioCookiePtmeIp->addGpio(gpioIds::VC2_PAPB_EMPTY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC3, "PAPB VC3");
gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_BUSY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC3, "PAPB VC3");
gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_EMPTY, gpio);
gpio = new GpiodRegularByLineName(q7s::gpioNames::PTME_RESETN, "PTME RESETN",
@ -753,19 +745,14 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
gpioChecker(args.gpioComIF.addGpios(gpioCookiePtmeIp), "PTME PAPB VCs");
// Creating virtual channel interfaces
VirtualChannelIF* vc0 =
new PapbVcInterface(&args.gpioComIF, gpioIds::VC0_PAPB_BUSY, gpioIds::VC0_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC0);
VirtualChannelIF* vc1 =
new PapbVcInterface(&args.gpioComIF, gpioIds::VC1_PAPB_BUSY, gpioIds::VC1_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC1);
VirtualChannelIF* vc2 =
new PapbVcInterface(&args.gpioComIF, gpioIds::VC2_PAPB_BUSY, gpioIds::VC2_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC2);
VirtualChannelIF* vc3 =
new PapbVcInterface(&args.gpioComIF, gpioIds::VC3_PAPB_BUSY, gpioIds::VC3_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC3);
VirtualChannelIF* vc0 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC0_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC0);
VirtualChannelIF* vc1 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC1_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC1);
VirtualChannelIF* vc2 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC2_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC2);
VirtualChannelIF* vc3 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC3_PAPB_EMPTY,
q7s::UIO_PTME, q7s::uiomapids::PTME_VC3);
// Creating ptme object and adding virtual channel interfaces
Ptme* ptme = new Ptme(objects::PTME);
ptme->addVcInterface(ccsds::VC0, vc0);

4
common/config/devices/gpioIds.h
View File

@ -96,13 +96,9 @@ enum gpioId_t {
SPI_MUX,
VC0_PAPB_EMPTY,
VC0_PAPB_BUSY,
VC1_PAPB_EMPTY,
VC1_PAPB_BUSY,
VC2_PAPB_EMPTY,
VC2_PAPB_BUSY,
VC3_PAPB_EMPTY,
VC3_PAPB_BUSY,
PTME_RESETN,
PDEC_RESET,

120
linux/ipcore/PapbVcInterface.cpp
View File

@ -7,20 +7,16 @@
#include "fsfw/serviceinterface/ServiceInterface.h"
PapbVcInterface::PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbBusyId,
gpioId_t papbEmptyId, std::string uioFile, int mapNum)
: gpioComIF(gpioComIF),
papbBusyId(papbBusyId),
papbEmptyId(papbEmptyId),
uioFile(std::move(uioFile)),
mapNum(mapNum) {}
PapbVcInterface::PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbEmptyId,
std::string uioFile, int mapNum)
: gpioComIF(gpioComIF), papbEmptyId(papbEmptyId), uioFile(std::move(uioFile)), mapNum(mapNum) {}
PapbVcInterface::~PapbVcInterface() {}
ReturnValue_t PapbVcInterface::initialize() {
UioMapper uioMapper(uioFile, mapNum);
ReturnValue_t result = uioMapper.getMappedAdress(const_cast<uint32_t**>(&vcBaseReg),
UioMapper::Permissions::WRITE_ONLY);
UioMapper::Permissions::READ_WRITE);
if (result != returnvalue::OK) {
return result;
}
@ -32,63 +28,16 @@ ReturnValue_t PapbVcInterface::write(const uint8_t* data, size_t size) {
if (size < 4) {
return returnvalue::FAILED;
}
if (pollInterfaceReadiness(0, true) == returnvalue::OK) {
if (pollReadyForPacket()) {
startPacketTransfer(ByteWidthCfg::ONE);
} else {
return DirectTmSinkIF::IS_BUSY;
}
// TODO: This should work but does not.. :(
// size_t idx = 0;
// while (idx < size) {
//
// nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
// if ((size - idx) < 4) {
// *vcBaseReg = CONFIG_DATA_INPUT | (size - idx - 1);
// usleep(1);
// }
// if (pollPapbBusySignal(2) == returnvalue::OK) {
// // vcBaseReg + DATA_REG_OFFSET + 3 = static_cast<uint8_t>(data + idx);
// // vcBaseReg + DATA_REG_OFFSET + 2 = static_cast<uint8_t>(data + idx + 1);
// // vcBaseReg + DATA_REG_OFFSET + 1 = static_cast<uint8_t>(data + idx + 2);
// // vcBaseReg + DATA_REG_OFFSET = static_cast<uint8_t>(data + idx + 3);
//
// // std::memcpy((vcBaseReg + DATA_REG_OFFSET), data + idx , nextWriteSize);
// *(vcBaseReg + DATA_REG_OFFSET) = *reinterpret_cast<const uint32_t*>(data + idx);
// //uint8_t* byteReg = reinterpret_cast<uint8_t*>(vcBaseReg + DATA_REG_OFFSET);
//
// //byteReg[0] = data[idx];
// //byteReg[1] = data[idx];
// } else {
// abortPacketTransfer();
// return returnvalue::FAILED;
// }
// // TODO: Change this after the bugfix. Right now, the PAPB ignores the content of the byte
// // width configuration.5
// // It's okay to increment by a larger amount for the last segment here, loop will be over
// // in any case.
// idx += 4;
// }
for (size_t idx = 0; idx < size; idx++) {
// This delay is super-important, DO NOT REMOVE!
// Polling the GPIO or the config register too often messes up the scheduler.
// TODO: Maybe this should not be done like this. It would be better if there was a custom
// FPGA module which can accept packets and then takes care of dumping that packet into
// the PTME. DMA would be an ideal solution for this.
nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
*(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]);
} else {
abortPacketTransfer();
return returnvalue::FAILED;
}
}
nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
completePacketTransfer();
} else {
abortPacketTransfer();
return returnvalue::FAILED;
// if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
*(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]);
}
completePacketTransfer();
return returnvalue::OK;
}
@ -98,60 +47,33 @@ void PapbVcInterface::startPacketTransfer(ByteWidthCfg initWidth) {
void PapbVcInterface::completePacketTransfer() { *vcBaseReg = CONFIG_END; }
ReturnValue_t PapbVcInterface::pollInterfaceReadiness(uint32_t maxPollRetries,
bool checkReadyState) const {
uint32_t busyIdx = 0;
nextDelay.tv_nsec = FIRST_DELAY_PAPB_POLLING_NS;
while (true) {
// Check if PAPB interface is ready to receive data. Use the configuration register for this.
// Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
uint32_t reg = *vcBaseReg;
bool busy = (reg >> 5) & 0b1;
bool ready = (reg >> 6) & 0b1;
if (not busy) {
return returnvalue::OK;
}
if (checkReadyState and not ready) {
return PAPB_BUSY;
}
busyIdx++;
if (busyIdx >= maxPollRetries) {
return PAPB_BUSY;
}
// Ignore signal handling here for now.
nanosleep(&nextDelay, &remDelay);
// Adaptive delay.
if (nextDelay.tv_nsec * 2 <= MAX_DELAY_PAPB_POLLING_NS) {
nextDelay.tv_nsec *= 2;
}
}
return returnvalue::OK;
bool PapbVcInterface::pollReadyForPacket() const {
// Check if PAPB interface is ready to receive data. Use the configuration register for this.
// Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
uint32_t reg = *vcBaseReg;
// bool busy = (reg >> 5) & 0b1;
return (reg >> 6) & 0b1;
}
void PapbVcInterface::isVcInterfaceBufferEmpty() {
bool PapbVcInterface::isVcInterfaceBufferEmpty() {
ReturnValue_t result = returnvalue::OK;
gpio::Levels papbEmptyState = gpio::Levels::HIGH;
result = gpioComIF->readGpio(papbEmptyId, papbEmptyState);
if (result != returnvalue::OK) {
sif::warning << "PapbVcInterface::isVcInterfaceBufferEmpty: Failed to read papb empty signal"
<< std::endl;
return;
sif::error << "PapbVcInterface::isVcInterfaceBufferEmpty: Failed to read papb empty signal"
<< std::endl;
return true;
}
if (papbEmptyState == gpio::Levels::HIGH) {
sif::debug << "PapbVcInterface::isVcInterfaceBufferEmpty: Buffer is empty" << std::endl;
} else {
sif::debug << "PapbVcInterface::isVcInterfaceBufferEmpty: Buffer is not empty" << std::endl;
return true;
}
return;
return false;
}
bool PapbVcInterface::isBusy() const { return pollInterfaceReadiness(0, true) == PAPB_BUSY; }
bool PapbVcInterface::isBusy() const { return not pollReadyForPacket(); }
void PapbVcInterface::cancelTransfer() { abortPacketTransfer(); }

10
linux/ipcore/PapbVcInterface.h
View File

@ -30,8 +30,7 @@ class PapbVcInterface : public VirtualChannelIF {
* @param uioFile UIO file providing access to the PAPB bus
* @param mapNum Map number of UIO map associated with this virtual channel
*/
PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbBusyId, gpioId_t papbEmptyId,
std::string uioFile, int mapNum);
PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbEmptyId, std::string uioFile, int mapNum);
virtual ~PapbVcInterface();
bool isBusy() const override;
@ -83,9 +82,6 @@ class PapbVcInterface : public VirtualChannelIF {
static constexpr long int MAX_DELAY_PAPB_POLLING_NS = 40;
LinuxLibgpioIF* gpioComIF = nullptr;
/** Pulled to low when virtual channel not ready to receive data */
gpioId_t papbBusyId = gpio::NO_GPIO;
/** High when external buffer memory of virtual channel is empty */
gpioId_t papbEmptyId = gpio::NO_GPIO;
@ -120,13 +116,13 @@ class PapbVcInterface : public VirtualChannelIF {
*
* @return returnvalue::OK when ready to receive data else PAPB_BUSY.
*/
inline ReturnValue_t pollInterfaceReadiness(uint32_t maxPollRetries, bool checkReadyState) const;
inline bool pollReadyForPacket() const;
/**
* @brief This function can be used for debugging to check whether there are packets in
* the packet buffer of the virtual channel or not.
*/
void isVcInterfaceBufferEmpty();
bool isVcInterfaceBufferEmpty();
/**
* @brief This function sends a complete telemetry transfer frame data field (1105 bytes)

6
mission/com/PersistentLogTmStoreTask.cpp
View File

@ -42,13 +42,7 @@ ReturnValue_t PersistentLogTmStoreTask::performOperation(uint8_t opCode) {
if (not someonesBusy) {
TaskFactory::delayTask(100);
} else if (vcBusyDuringDump) {
// TODO: Might not be necessary
sif::debug << "VC busy, delaying" << std::endl;
TaskFactory::delayTask(10);
} else {
// TODO: Would be best to remove this, but not delaying here can lead to evil issues.
// Polling the PAPB of the PTME core too often leads to scheuduling issues.
TaskFactory::delayTask(2);
}
}
}

6
mission/com/PersistentSingleTmStoreTask.cpp
View File

@ -24,13 +24,7 @@ ReturnValue_t PersistentSingleTmStoreTask::performOperation(uint8_t opCode) {
if (not busy) {
TaskFactory::delayTask(100);
} else if (dumpContext.vcBusyDuringDump) {
sif::debug << "VC busy, delaying" << std::endl;
// TODO: Might not be necessary
TaskFactory::delayTask(10);
} else {
// TODO: Would be best to remove this, but not delaying here can lead to evil issues.
// Polling the PAPB of the PTME core too often leads to scheuduling issues.
TaskFactory::delayTask(2);
}
}
}