reamde update
This commit is contained in:
parent
4545236f7f
commit
cc883c30f4
88
README.md
88
README.md
|
|
@ -4,7 +4,7 @@
|
|||
|
||||
Target systems:
|
||||
|
||||
* OBC
|
||||
* OBC with Linux OS
|
||||
* Xiphos Q7S
|
||||
* Based on Zynq-7020 SoC (xc7z020clg484-2)
|
||||
* Dual-core ARM Cortex-A9
|
||||
|
|
@ -12,16 +12,19 @@ Target systems:
|
|||
* Artix-7 FPGA (85K pogrammable logic cells)
|
||||
* Datasheet at https://eive-cloud.irs.uni-stuttgart.de/index.php/apps/files/?dir=/EIVE_IRS/Arbeitsdaten/08_Used%20Components/Q7S&fileid=340648
|
||||
* Also a lot of informatin about the Q7S can be found on the xiphos trac platform: https://trac.xiphos.com/trac/eive-q7/wiki/Q7RevB
|
||||
* Linux OS
|
||||
* Built with Yocto 2.5
|
||||
* Linux OS built with Yocto 2.5
|
||||
* Linux Kernel https://github.com/XiphosSystemsCorp/linux-xlnx.git
|
||||
* Host System
|
||||
* Generic software components which are not dependant on hardware can also
|
||||
be run. All host code is contained in the hosted folder
|
||||
* Tested for Linux (Ubuntu 20.04) and Windows 10
|
||||
* Raspberry Pi
|
||||
* EIVE OBC can be built for Raspberry Pi as well (either directly on Raspberry Pi or by installing a cross compiler)
|
||||
|
||||
The steps in the primary README are related to the main OBC target Q7S.
|
||||
|
||||
## Setting up development environment
|
||||
|
||||
* Install Vivado 2018.2 and Xilinx SDK from https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/archive.html.
|
||||
Install the Vivado Design Suite - HLx Editions - 2018.2 Full Product Installation instead of the updates. It is recommended to use the installer
|
||||
* Install settings. In the Devices selection, it is sufficient to pick SoC → Zynq-7000: <br>
|
||||
|
|
@ -133,65 +136,76 @@ git submodule update
|
|||
|
||||
## Debugging the software via Flatsat PC
|
||||
Open SSH connection to flatsat PC:
|
||||
````
|
||||
|
||||
```sh
|
||||
ssh eive@2001:7c0:2018:1099:babe:0:e1fe:f1a5
|
||||
````
|
||||
```
|
||||
|
||||
To access the console of the Q7S run the following:
|
||||
```sh
|
||||
picocom -b 115200 /dev/ttyUSB0
|
||||
```
|
||||
|
||||
To debug an application, first make sure a static IP address is assigned to the Q7S. Run ifconfig on the Q7S serial console.
|
||||
````
|
||||
|
||||
```sh
|
||||
ifconfig
|
||||
````
|
||||
```
|
||||
|
||||
Set IP address and netmask with
|
||||
````
|
||||
|
||||
```sh
|
||||
ifconfig eth0 192.168.133.10
|
||||
ifconfig eth0 netmask 255.255.255.0
|
||||
````
|
||||
```
|
||||
|
||||
To launch application from Xilinx SDK setup port fowarding on the localhost.
|
||||
````
|
||||
|
||||
```sh
|
||||
ssh -L 1534:192.168.133.10:1534 eive@2001:7c0:2018:1099:babe:0:e1fe:f1a5
|
||||
````
|
||||
```
|
||||
|
||||
This forwards any requests to localhost:1534 to the port 1534 of the Q7S with the IP address 192.168.133.10.
|
||||
|
||||
Note: When now setting up a debug session in the Xilinx SDK, the host must be set to localhost instead of the IP address
|
||||
of the Q7S.
|
||||
|
||||
Note: When now setting up a debug session in the Xilinx SDK, the host must be set to localhost instead of the IP address of the Q7S.
|
||||
|
||||
## Launching an application after boot
|
||||
Load the root partiton from the flash memory (there are to nor-flash memories and each flash holds two xdi images).
|
||||
Note: It is not possible to modify the current loaded root partition.
|
||||
1. Disable write protection of the desired root partition
|
||||
````
|
||||
writeprotect 0 0 0 # unlocks nominal image on nor-flash 0
|
||||
````
|
||||
|
||||
```sh
|
||||
writeprotect 0 0 0 # unlocks nominal image on nor-flash 0
|
||||
```
|
||||
|
||||
2. Mount the root partition
|
||||
````
|
||||
xsc_mount_copy 0 0 # Mounts the nominal image from nor-flash 0
|
||||
````
|
||||
|
||||
```sh
|
||||
xsc_mount_copy 0 0 # Mounts the nominal image from nor-flash 0
|
||||
```
|
||||
3. Copy the executable to /bin/usr
|
||||
4. Make sure the permissions to execute the application are set
|
||||
````
|
||||
chmod +x application
|
||||
````
|
||||
```sh
|
||||
chmod +x application
|
||||
```
|
||||
|
||||
5. Create systemd service in /lib/systemd/system. The following shows an example service.
|
||||
````
|
||||
cat > example.service
|
||||
[Unit]
|
||||
Description=Example Service
|
||||
StartLimitIntervalSec=0
|
||||
```sh
|
||||
cat > example.service
|
||||
[Unit]
|
||||
Description=Example Service
|
||||
StartLimitIntervalSec=0
|
||||
|
||||
[Service]
|
||||
Type=simple
|
||||
Restart=always
|
||||
RestartSec=1
|
||||
User=root
|
||||
ExecStart=/usr/bin/application
|
||||
[Service]
|
||||
Type=simple
|
||||
Restart=always
|
||||
RestartSec=1
|
||||
User=root
|
||||
ExecStart=/usr/bin/application
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
````
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
```
|
||||
6. Enable the service. This is normally done with systemctl enable. However, this is not possible when the service is
|
||||
created for a mounted root partition. Therefore create a symlink as follows.
|
||||
````
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user