eive-obsw/mission/devices/devicedefinitions/BpxBatteryDefinitions.h
Robin Mueller 447c4d5c88
All checks were successful
EIVE/eive-obsw/pipeline/head This commit looks good
all retval replacements
2022-08-24 17:27:47 +02:00

252 lines
8.2 KiB
C++

#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_BPXBATTERYDEFINITIONS_H_
#define MISSION_DEVICES_DEVICEDEFINITIONS_BPXBATTERYDEFINITIONS_H_
#include <fsfw/datapoollocal/StaticLocalDataSet.h>
#include <fsfw/serialize/SerialLinkedListAdapter.h>
#include <cstdint>
#include "fsfw/devicehandlers/DeviceHandlerIF.h"
namespace BpxBattery {
enum LocalPoolIds {
CHARGE_CURRENT = 0,
DISCHARGE_CURRENT = 1,
HEATER_CURRENT = 2,
BATT_VOLTAGE = 3,
BATT_TEMP_1 = 4,
BATT_TEMP_2 = 5,
BATT_TEMP_3 = 6,
BATT_TEMP_4 = 7,
REBOOT_COUNTER = 8,
BOOTCAUSE = 9,
BATTERY_HEATER_MODE = 10,
BATTHEAT_LOW_LIMIT = 11,
BATTHEAT_HIGH_LIMIT = 12
};
static constexpr DeviceCommandId_t GET_HK = 0;
static constexpr DeviceCommandId_t PING = 1;
static constexpr DeviceCommandId_t REBOOT = 2;
static constexpr DeviceCommandId_t RESET_COUNTERS = 3;
// This is the mnemonic GomSpace chose, but this command actually restores the default config
static constexpr DeviceCommandId_t CONFIG_CMD = 4;
static constexpr DeviceCommandId_t CONFIG_GET = 5;
static constexpr DeviceCommandId_t CONFIG_SET = 6;
static constexpr DeviceCommandId_t MAN_HEAT_ON = 10;
static constexpr DeviceCommandId_t MAN_HEAT_OFF = 11;
static constexpr uint8_t RESET_COUNTERS_MAGIC_VALUE = 0x42;
static constexpr uint8_t DEFAULT_PING_SENT_BYTE = 0x07;
static constexpr uint32_t HK_SET_ID = GET_HK;
static constexpr uint32_t CFG_SET_ID = CONFIG_GET;
static constexpr size_t GET_HK_REPLY_LEN = 23;
static constexpr size_t PING_REPLY_LEN = 3;
static constexpr size_t EMPTY_REPLY_LEN = 2;
static constexpr size_t CONFIG_GET_REPLY_LEN = 5;
static constexpr uint8_t PORT_PING = 1;
static constexpr uint8_t PORT_REBOOT = 4;
static constexpr uint8_t PORT_GET_HK = 9;
static constexpr uint8_t PORT_RESET_COUNTERS = 15;
static constexpr uint8_t PORT_CONFIG_CMD = 17;
static constexpr uint8_t PORT_CONFIG_GET = 18;
static constexpr uint8_t PORT_CONFIG_SET = 19;
static constexpr uint8_t PORT_MAN_HEAT_ON = 20;
static constexpr uint8_t PORT_MAN_HEAT_OFF = 21;
static constexpr uint8_t HK_ENTRIES = 10;
static constexpr uint8_t CFG_ENTRIES = 3;
// Taken from BPX manual 3.14
typedef struct __attribute__((packed)) {
//! Mode for battheater [0=OFF,1=Auto]
uint8_t battheater_mode;
int8_t battheater_low;
//! Turn heater on at [degC]
int8_t battheater_high;
//! Turn heater off at [degC]
} bpx_config_t;
//! Not used for more but might still be useful
class BpxHkDeserializer : public SerialLinkedListAdapter<SerializeIF> {
public:
BpxHkDeserializer() { setLinks(); }
//! Charge current in mA
SerializeElement<uint16_t> chargeCurrent;
//! Discharge current in mA
SerializeElement<uint16_t> dischargeCurrent;
//! Heater current in mA
SerializeElement<uint16_t> heaterCurrent;
//! Battery voltage in mV
SerializeElement<uint16_t> battVoltage;
//! Battery temperature 1 in degC
SerializeElement<int16_t> battTemp1;
//! Battery temperature 2 in degC
SerializeElement<int16_t> battTemp2;
//! Battery temperature 3 in degC
SerializeElement<int16_t> battTemp3;
//! Battery temperature 4 in degC
SerializeElement<int16_t> battTemp4;
SerializeElement<uint32_t> rebootCounter;
SerializeElement<uint8_t> bootcause;
private:
void setLinks() {
setStart(&chargeCurrent);
chargeCurrent.setNext(&dischargeCurrent);
dischargeCurrent.setNext(&heaterCurrent);
heaterCurrent.setNext(&battVoltage);
battVoltage.setNext(&battTemp1);
battTemp1.setNext(&battTemp2);
battTemp2.setNext(&battTemp3);
battTemp3.setNext(&battTemp4);
battTemp4.setNext(&rebootCounter);
rebootCounter.setNext(&bootcause);
}
};
}; // namespace BpxBattery
/**
* @brief BPX HK data holder
*/
class BpxBatteryHk : public StaticLocalDataSet<BpxBattery::HK_ENTRIES> {
public:
/**
* Constructor for data users
* @param gyroId
*/
BpxBatteryHk(object_id_t bpxId) : StaticLocalDataSet(sid_t(bpxId, BpxBattery::HK_SET_ID)) {
setAllVariablesReadOnly();
}
ReturnValue_t parseRawHk(const uint8_t* data, size_t size) {
size_t remSize = size;
ReturnValue_t result =
chargeCurrent.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = dischargeCurrent.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = heaterCurrent.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = battVoltage.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = battTemp1.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = battTemp2.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = battTemp3.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = battTemp4.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = rebootCounter.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
result = bootcause.deSerialize(&data, &remSize, SerializeIF::Endianness::NETWORK);
if (result != returnvalue::OK) {
return result;
}
return result;
}
//! Charge current in mA
lp_var_t<uint16_t> chargeCurrent =
lp_var_t<uint16_t>(sid.objectId, BpxBattery::CHARGE_CURRENT, this);
//! Discharge current in mA
lp_var_t<uint16_t> dischargeCurrent =
lp_var_t<uint16_t>(sid.objectId, BpxBattery::DISCHARGE_CURRENT, this);
//! Heater current in mA
lp_var_t<uint16_t> heaterCurrent =
lp_var_t<uint16_t>(sid.objectId, BpxBattery::HEATER_CURRENT, this);
//! Battery voltage in mV
lp_var_t<uint16_t> battVoltage = lp_var_t<uint16_t>(sid.objectId, BpxBattery::BATT_VOLTAGE, this);
//! Battery temperature 1 in degC
lp_var_t<int16_t> battTemp1 = lp_var_t<int16_t>(sid.objectId, BpxBattery::BATT_TEMP_1, this);
//! Battery temperature 2 in degC
lp_var_t<int16_t> battTemp2 = lp_var_t<int16_t>(sid.objectId, BpxBattery::BATT_TEMP_2, this);
//! Battery temperature 3 in degC
lp_var_t<int16_t> battTemp3 = lp_var_t<int16_t>(sid.objectId, BpxBattery::BATT_TEMP_3, this);
//! Battery temperature 4 in degC
lp_var_t<int16_t> battTemp4 = lp_var_t<int16_t>(sid.objectId, BpxBattery::BATT_TEMP_4, this);
lp_var_t<uint32_t> rebootCounter =
lp_var_t<uint32_t>(sid.objectId, BpxBattery::REBOOT_COUNTER, this);
lp_var_t<uint8_t> bootcause = lp_var_t<uint8_t>(sid.objectId, BpxBattery::BOOTCAUSE, this);
private:
friend class BpxBatteryHandler;
/**
* Constructor for data creator
* @param hkOwner
*/
BpxBatteryHk(HasLocalDataPoolIF* hkOwner) : StaticLocalDataSet(hkOwner, BpxBattery::HK_SET_ID) {}
};
class BpxBatteryCfg : public StaticLocalDataSet<BpxBattery::CFG_ENTRIES> {
public:
/**
* Constructor for data users
* @param gyroId
*/
BpxBatteryCfg(object_id_t bpxId) : StaticLocalDataSet(sid_t(bpxId, BpxBattery::CFG_SET_ID)) {
setAllVariablesReadOnly();
}
ReturnValue_t parseRawHk(const uint8_t* data, size_t size) {
if (size < 3) {
return SerializeIF::STREAM_TOO_SHORT;
}
battheatermode.value = data[0];
battheaterLow.value = data[1];
battheaterHigh.value = data[2];
return returnvalue::OK;
}
//! Mode for battheater [0=OFF,1=Auto]
lp_var_t<uint8_t> battheatermode =
lp_var_t<uint8_t>(sid.objectId, BpxBattery::BATTERY_HEATER_MODE, this);
//! Turn heater on at [degC]
lp_var_t<int8_t> battheaterLow =
lp_var_t<int8_t>(sid.objectId, BpxBattery::BATTHEAT_LOW_LIMIT, this);
//! Turn heater off at [degC]
lp_var_t<int8_t> battheaterHigh =
lp_var_t<int8_t>(sid.objectId, BpxBattery::BATTHEAT_HIGH_LIMIT, this);
private:
friend class BpxBatteryHandler;
/**
* Constructor for data creator
* @param hkOwner
*/
BpxBatteryCfg(HasLocalDataPoolIF* hkOwner)
: StaticLocalDataSet(hkOwner, BpxBattery::CFG_SET_ID) {}
};
#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_BPXBATTERYDEFINITIONS_H_ */