eive-tmtc/eive_tmtc/tmtc/com/syrlinks_handler.py

343 lines
14 KiB
Python
Raw Normal View History

2021-02-27 13:09:55 +01:00
# -*- coding: utf-8 -*-
"""
2021-05-17 18:08:43 +02:00
@file syrlinks_hk_handler.py
2021-02-27 13:42:41 +01:00
@brief Syrlinks Hk Handler tests
2021-02-27 13:09:55 +01:00
@author J. Meier
@date 13.12.2020
"""
2023-01-16 14:13:06 +01:00
import enum
2023-01-18 15:43:02 +01:00
from eive_tmtc.pus_tm.defs import PrintWrapper
2022-11-29 16:53:29 +01:00
from eive_tmtc.config.definitions import CustomServiceList
from tmtccmd.config.tmtc import (
tmtc_definitions_provider,
TmtcDefinitionWrapper,
OpCodeEntry,
)
2022-08-08 16:32:18 +02:00
from tmtccmd.tc import DefaultPusQueueHelper
2023-01-18 15:36:09 +01:00
from tmtccmd.tc.pus_3_fsfw_hk import (
make_sid,
create_request_one_diag_command,
2023-01-23 15:04:06 +01:00
create_enable_periodic_hk_command_with_interval,
create_disable_periodic_hk_command,
2023-01-18 15:36:09 +01:00
)
2021-12-02 09:25:31 +01:00
from spacepackets.ecss.tc import PusTelecommand
2023-01-26 14:29:56 +01:00
from tmtccmd.tc.pus_200_fsfw_modes import Mode, create_mode_command
from tmtccmd.tc.pus_20_fsfw_params import (
pack_scalar_u8_parameter_app_data,
create_load_param_cmd,
)
2023-01-26 13:43:57 +01:00
from eive_tmtc.config.object_ids import SYRLINKS_HANDLER_ID
2022-03-31 11:36:50 +02:00
import struct
2021-02-27 13:09:55 +01:00
2022-07-08 16:25:46 +02:00
from tmtccmd.util import ObjectIdU32
2023-01-18 15:43:02 +01:00
from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
2022-07-04 17:59:09 +02:00
2021-02-27 13:09:55 +01:00
2023-01-16 14:13:06 +01:00
class SetId:
2021-03-01 12:14:04 +01:00
RX_REGISTERS_DATASET = 1
TX_REGISTERS_DATASET = 2
2023-01-18 15:36:09 +01:00
TEMPERATURE_SET_ID = 3
2021-02-27 13:09:55 +01:00
2023-01-16 14:13:06 +01:00
class OpCode:
OFF = "off"
ON = "on"
2023-01-26 13:43:57 +01:00
NORMAL_RX_ONLY = "nml_rx_only"
NORMAL_RX_AND_TX_CW = "nml_carrier_wave"
NORMAL_RX_AND_TX_LOW_DATARATE = "nml_low_datarate"
NORMAL_RX_AND_TX_HIGH_DATARATE = "nml_high_datarate"
UPDATE_DEFAULT_DATARATE_LOW_RATE = "update_default_datarate_low_rate"
UPDATE_DEFAULT_DATARATE_HIGH_RATE = "update_default_datarate_high_rate"
2023-01-10 10:27:00 +01:00
HK_RX_REGS = "hk_rx_regs"
2023-01-23 15:04:06 +01:00
ENABLE_HK_RX_REGS = "enable_hk_rx"
DISABLE_HK_RX_REGS = "disable_hk_rx"
2023-01-24 19:07:11 +01:00
ENABLE_HK_TX_REGS = "enable_hk_tx"
DISABLE_HK_TX_REGS = "disable_hk_tx"
2023-01-10 10:27:00 +01:00
HK_TX_REGS = "hk_tx_regs"
TX_STATUS = "tx_status"
RX_STATUS = "rx_status"
class Info:
2023-01-26 13:43:57 +01:00
OFF = "Switch OFF"
ON = "Switch ON"
NORMAL_RX_ONLY = "NORMAL RX Only, set TX to standby"
2023-01-26 14:00:03 +01:00
NORMAL_RX_AND_TX_CW = "NORMAL RX and TX, TX Carrier Wave"
NORMAL_RX_AND_TX_DEFAULT_DATARATE = "NORMAL RX and TX, TX with default datarate"
NORMAL_RX_AND_TX_LOW_DATARATE = "NORMAL RX and TX, TX with low datarate"
NORMAL_RX_AND_TX_HIGH_DATARATE = "NORMAL RX and TX, TX with high datarate"
UPDATE_DEFAULT_DATARATE_LOW_RATE = "Update default datarate to low rate (BPSK)"
UPDATE_DEFAULT_DATARATE_HIGH_RATE = "Update default datarate to high rate (0QPSK)"
2023-01-10 10:27:00 +01:00
HK_RX_REGS = "Request RX register set"
HK_TX_REGS = "Request TX register set"
2023-01-23 15:04:06 +01:00
ENABLE_HK_RX_REGS = "Enable periodic RX register HK"
DISABLE_HK_RX_REGS = "Disable periodic RX register HK"
2023-01-24 19:07:11 +01:00
ENABLE_HK_TX_REGS = "Enable periodic TX register HK"
DISABLE_HK_TX_REGS = "Disable periodic TX register HK"
2023-01-10 10:27:00 +01:00
TX_STATUS = "Read TX status (always read in normal mode)"
RX_STATUS = "Read RX status (always read in normal mode)"
SET_CW = "Set TX carrier wave"
2022-05-27 14:29:56 +02:00
2023-01-16 14:13:06 +01:00
class CommandId(enum.IntEnum):
2022-04-04 15:05:38 +02:00
READ_RX_STATUS_REGISTERS = 2
SET_TX_MODE_STANDBY = 3
SET_TX_MODE_MODULATION = 4
SET_TX_MODE_CW = 5
READ_TX_STATUS = 7
READ_TX_WAVEFORM = 8
READ_TX_AGC_VALUE_HIGH_BYTE = 9
READ_TX_AGC_VALUE_LOW_BYTE = 10
2022-03-31 11:36:50 +02:00
WRITE_LCL_CONFIG = 11
READ_LCL_CONFIG_REGISTER = 12
2022-04-04 15:05:38 +02:00
SET_WAVEFORM_OQPSK = 17
SET_WAVEFORM_BPSK = 18
SET_SECOND_CONFIG = 19
ENABLE_DEBUG = 20
2022-04-05 08:42:38 +02:00
DISABLE_DEBUG = 21
2021-02-27 13:09:55 +01:00
2021-12-02 09:25:31 +01:00
2023-01-26 13:43:57 +01:00
class Submode(enum.IntEnum):
2023-01-26 15:45:25 +01:00
RX_ONLY = 0
RX_AND_TX_DEFAULT_DATARATE = 1
2023-01-26 13:43:57 +01:00
RX_AND_TX_LOW_DATARATE = 2
RX_AND_TX_HIGH_DATARATE = 3
RX_AND_TX_CW = 4
class ParameterId(enum.IntEnum):
DATARATE = 0
2023-01-26 14:29:56 +01:00
class Datarate(enum.IntEnum):
LOW_RATE_MODULATION_BPSK = 0
2023-01-26 13:43:57 +01:00
HIGH_RATE_MODULATION_0QPSK = 1
@tmtc_definitions_provider
def add_syrlinks_cmds(defs: TmtcDefinitionWrapper):
oce = OpCodeEntry()
2023-01-26 13:43:57 +01:00
oce.add(OpCode.OFF, Info.OFF)
oce.add(OpCode.ON, Info.ON)
oce.add(OpCode.NORMAL_RX_ONLY, Info.NORMAL_RX_ONLY)
oce.add(OpCode.NORMAL_RX_AND_TX_CW, Info.NORMAL_RX_AND_TX_CW)
oce.add(OpCode.NORMAL_RX_AND_TX_LOW_DATARATE, Info.NORMAL_RX_AND_TX_LOW_DATARATE)
oce.add(OpCode.NORMAL_RX_AND_TX_HIGH_DATARATE, Info.NORMAL_RX_AND_TX_HIGH_DATARATE)
oce.add(
OpCode.UPDATE_DEFAULT_DATARATE_LOW_RATE, Info.UPDATE_DEFAULT_DATARATE_LOW_RATE
)
oce.add(
OpCode.UPDATE_DEFAULT_DATARATE_HIGH_RATE, Info.UPDATE_DEFAULT_DATARATE_HIGH_RATE
)
2023-01-16 14:13:06 +01:00
oce.add(OpCode.HK_RX_REGS, Info.HK_RX_REGS)
oce.add(OpCode.HK_TX_REGS, Info.HK_TX_REGS)
oce.add(OpCode.TX_STATUS, Info.TX_STATUS)
oce.add(OpCode.RX_STATUS, Info.RX_STATUS)
2023-01-23 15:04:06 +01:00
oce.add(OpCode.ENABLE_HK_RX_REGS, Info.ENABLE_HK_RX_REGS)
oce.add(OpCode.DISABLE_HK_RX_REGS, Info.DISABLE_HK_RX_REGS)
2023-01-24 19:07:11 +01:00
oce.add(OpCode.ENABLE_HK_TX_REGS, Info.ENABLE_HK_TX_REGS)
oce.add(OpCode.DISABLE_HK_TX_REGS, Info.DISABLE_HK_TX_REGS)
oce.add("7", "Syrlinks Handler: Read TX waveform")
oce.add("8", "Syrlinks Handler: Read TX AGC value high byte")
oce.add("9", "Syrlinks Handler: Read TX AGC value low byte")
oce.add("12", "Syrlinks Handler: Write LCL config")
oce.add("14", "Syrlinks Handler: Read LCL config register")
oce.add("15", "Syrlinks Handler: Set waveform OQPSK")
oce.add("16", "Syrlinks Handler: Set waveform BPSK")
oce.add("17", "Syrlinks Handler: Set second config")
oce.add("18", "Syrlinks Handler: Enable debug output")
oce.add("19", "Syrlinks Handler: Disable debug output")
defs.add_service(CustomServiceList.SYRLINKS.value, "Syrlinks Handler", oce)
2023-01-26 13:43:57 +01:00
_PREFIX = "Syrlinks"
def normal_mode_cmd(q: DefaultPusQueueHelper, info: str, submode: int):
q.add_log_cmd(f"{_PREFIX}: {info}")
q.add_pus_tc(create_mode_command(SYRLINKS_HANDLER_ID, Mode.NORMAL, submode))
2022-08-08 16:32:18 +02:00
def pack_syrlinks_command(
object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_code: str
):
2022-07-04 17:59:09 +02:00
obyt = object_id.as_bytes
2023-01-10 10:27:00 +01:00
prefix = "Syrlinks"
2022-07-04 17:59:09 +02:00
q.add_log_cmd(f"Testing Syrlinks with object id: {object_id.as_hex_string}")
2023-01-16 14:13:06 +01:00
if op_code == OpCode.OFF:
2023-01-26 13:43:57 +01:00
q.add_log_cmd(f"{prefix}: {Info.OFF}")
2023-01-26 13:45:59 +01:00
q.add_pus_tc(create_mode_command(obyt, Mode.OFF, 0))
2023-01-16 14:13:06 +01:00
if op_code == OpCode.ON:
2023-01-26 13:43:57 +01:00
q.add_log_cmd(f"{prefix}: {Info.ON}")
2023-01-26 13:45:59 +01:00
q.add_pus_tc(create_mode_command(obyt, Mode.ON, 0))
2023-01-26 13:43:57 +01:00
if op_code == OpCode.NORMAL_RX_ONLY:
2023-01-26 15:45:25 +01:00
normal_mode_cmd(q, Info.NORMAL_RX_ONLY, Submode.RX_ONLY)
2023-01-26 13:43:57 +01:00
if op_code == OpCode.NORMAL_RX_AND_TX_LOW_DATARATE:
2023-01-26 15:45:25 +01:00
normal_mode_cmd(
q, Info.NORMAL_RX_AND_TX_LOW_DATARATE, Submode.RX_AND_TX_LOW_DATARATE
)
2023-01-26 13:43:57 +01:00
if op_code == OpCode.NORMAL_RX_AND_TX_HIGH_DATARATE:
2023-01-26 15:45:25 +01:00
normal_mode_cmd(
q, Info.NORMAL_RX_AND_TX_HIGH_DATARATE, Submode.RX_AND_TX_HIGH_DATARATE
)
if op_code == OpCode.UPDATE_DEFAULT_DATARATE_LOW_RATE:
q.add_log_cmd(f"{prefix}: {Info.UPDATE_DEFAULT_DATARATE_LOW_RATE}")
create_load_param_cmd(
pack_scalar_u8_parameter_app_data(
obyt, 0, ParameterId.DATARATE, Datarate.LOW_RATE_MODULATION_BPSK
)
)
if op_code == OpCode.UPDATE_DEFAULT_DATARATE_HIGH_RATE:
q.add_log_cmd(f"{prefix}: {Info.UPDATE_DEFAULT_DATARATE_HIGH_RATE}")
create_load_param_cmd(
pack_scalar_u8_parameter_app_data(
obyt, 0, ParameterId.DATARATE, Datarate.HIGH_RATE_MODULATION_0QPSK
)
)
2023-01-26 13:43:57 +01:00
if op_code in OpCode.NORMAL_RX_AND_TX_CW:
2023-01-26 15:45:25 +01:00
normal_mode_cmd(q, Info.NORMAL_RX_AND_TX_CW, Submode.RX_AND_TX_CW)
2023-01-16 14:13:06 +01:00
if op_code in OpCode.HK_RX_REGS:
2023-01-10 10:27:00 +01:00
q.add_log_cmd(f"{prefix}: {Info.HK_RX_REGS}")
2023-01-16 14:13:06 +01:00
sid = make_sid(obyt, SetId.RX_REGISTERS_DATASET)
2023-01-18 15:36:09 +01:00
q.add_pus_tc(create_request_one_diag_command(sid))
2023-01-23 15:04:06 +01:00
if op_code in OpCode.ENABLE_HK_RX_REGS:
q.add_log_cmd(f"{prefix}: {Info.ENABLE_HK_RX_REGS}")
sid = make_sid(obyt, SetId.RX_REGISTERS_DATASET)
2023-01-24 19:07:11 +01:00
interval = float(input("HK interval in floating point seconds"))
cmds = create_enable_periodic_hk_command_with_interval(True, sid, interval)
2023-01-23 15:04:06 +01:00
for cmd in cmds:
q.add_pus_tc(cmd)
if op_code in OpCode.DISABLE_HK_RX_REGS:
q.add_log_cmd(f"{prefix}: {Info.DISABLE_HK_RX_REGS}")
sid = make_sid(obyt, SetId.RX_REGISTERS_DATASET)
q.add_pus_tc(create_disable_periodic_hk_command(True, sid))
2023-01-24 19:07:11 +01:00
if op_code in OpCode.ENABLE_HK_TX_REGS:
q.add_log_cmd(f"{prefix}: {Info.ENABLE_HK_TX_REGS}")
sid = make_sid(obyt, SetId.TX_REGISTERS_DATASET)
interval = float(input("HK interval in floating point seconds"))
cmds = create_enable_periodic_hk_command_with_interval(True, sid, interval)
for cmd in cmds:
q.add_pus_tc(cmd)
if op_code in OpCode.DISABLE_HK_TX_REGS:
q.add_log_cmd(f"{prefix}: {Info.DISABLE_HK_TX_REGS}")
sid = make_sid(obyt, SetId.TX_REGISTERS_DATASET)
q.add_pus_tc(create_disable_periodic_hk_command(True, sid))
2023-01-16 14:13:06 +01:00
if op_code in OpCode.HK_TX_REGS:
2023-01-10 10:27:00 +01:00
q.add_log_cmd(f"{prefix}: {Info.HK_TX_REGS}")
2023-01-16 14:13:06 +01:00
sid = make_sid(obyt, SetId.TX_REGISTERS_DATASET)
2023-01-18 15:36:09 +01:00
q.add_pus_tc(create_request_one_diag_command(sid))
2023-01-16 14:13:06 +01:00
if op_code in OpCode.TX_STATUS:
2023-01-10 10:27:00 +01:00
q.add_log_cmd(f"{prefix}: {Info.TX_STATUS}")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.READ_TX_STATUS)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-03-29 07:03:13 +02:00
if op_code == "9":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Read TX waveform")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.READ_TX_WAVEFORM)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-03-29 07:03:13 +02:00
if op_code == "10":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Read TX AGC value high byte")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.READ_TX_AGC_VALUE_HIGH_BYTE)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-03-29 07:03:13 +02:00
if op_code == "11":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Read TX AGC value low byte")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.READ_TX_AGC_VALUE_LOW_BYTE)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-03-31 11:36:50 +02:00
if op_code == "12":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Write LCL config")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.WRITE_LCL_CONFIG)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-03-31 11:36:50 +02:00
if op_code == "13":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Read RX status registers")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.READ_RX_STATUS_REGISTERS)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-03-31 11:36:50 +02:00
if op_code == "14":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Read LCL config register")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.READ_LCL_CONFIG_REGISTER)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-04-04 15:05:38 +02:00
if op_code == "15":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Set waveform OQPSK")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.SET_WAVEFORM_OQPSK)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-04-04 15:05:38 +02:00
if op_code == "16":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Set waveform BPSK")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.SET_WAVEFORM_BPSK)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-04-04 15:05:38 +02:00
if op_code == "17":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Set second config")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.SET_SECOND_CONFIG)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-04-04 15:05:38 +02:00
if op_code == "18":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Enable debug printout")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.ENABLE_DEBUG)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2022-04-04 15:05:38 +02:00
if op_code == "19":
2022-07-04 17:59:09 +02:00
q.add_log_cmd("Syrlinks: Disable debug printout")
2023-01-16 14:13:06 +01:00
command = obyt + struct.pack("!I", CommandId.DISABLE_DEBUG)
2022-07-04 17:59:09 +02:00
q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
2023-01-18 15:43:02 +01:00
def handle_syrlinks_hk_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
if set_id == SetId.RX_REGISTERS_DATASET:
return handle_syrlinks_rx_registers_dataset(printer, hk_data)
elif set_id == SetId.TX_REGISTERS_DATASET:
return handle_syrlinks_tx_registers_dataset(printer, hk_data)
else:
pw = PrintWrapper(printer)
pw.dlog(f"Service 3 TM: Syrlinks handler reply with unknown set ID {set_id}")
def handle_syrlinks_rx_registers_dataset(printer: FsfwTmTcPrinter, hk_data: bytes):
pw = PrintWrapper(printer)
header_list = [
"RX Status",
"RX Sensitivity",
"RX Frequency Shift",
"RX IQ Power",
"RX AGC Value",
"RX Demod Eb",
"RX Demod N0",
"RX Datarate",
]
rx_status = hk_data[0]
2023-01-18 15:52:35 +01:00
rx_sensitivity = struct.unpack("!I", hk_data[1:5])[0]
2023-01-23 15:35:24 +01:00
rx_frequency_shift = struct.unpack("!i", hk_data[5:9])[0]
freq_shift_hz = rx_frequency_shift / 8.0
freq_shift_printout = f"Raw: {rx_frequency_shift}, Eng: {freq_shift_hz} Hz"
2023-01-18 15:52:35 +01:00
rx_iq_power = struct.unpack("!H", hk_data[9:11])[0]
rx_agc_value = struct.unpack("!H", hk_data[11:13])[0]
rx_demod_eb = struct.unpack("!I", hk_data[13:17])[0]
rx_demod_n0 = struct.unpack("!I", hk_data[17:21])[0]
2023-01-18 15:43:02 +01:00
rx_data_rate = hk_data[21]
content_list = [
rx_status,
rx_sensitivity,
2023-01-23 15:35:24 +01:00
freq_shift_printout,
2023-01-18 15:43:02 +01:00
rx_iq_power,
rx_agc_value,
rx_demod_eb,
rx_demod_n0,
rx_data_rate,
]
validity_buffer = hk_data[22:]
2023-01-18 15:52:35 +01:00
for header, content in zip(header_list, content_list):
pw.dlog(f"{header}: {content}")
2023-01-18 15:43:02 +01:00
printer.print_validity_buffer(validity_buffer=validity_buffer, num_vars=8)
def handle_syrlinks_tx_registers_dataset(
printer: FsfwTmTcPrinter,
hk_data: bytes,
):
pw = PrintWrapper(printer)
header_list = ["TX Status", "TX Waveform", "TX AGC value"]
tx_status = hk_data[0]
tx_waveform = hk_data[1]
2023-01-26 13:43:57 +01:00
tx_agc_value = struct.unpack("!H", hk_data[2:4])[0]
2023-01-18 15:43:02 +01:00
content_list = [tx_status, tx_waveform, tx_agc_value]
validity_buffer = hk_data[4:]
2023-01-18 15:52:35 +01:00
for header, content in zip(header_list, content_list):
pw.dlog(f"{header}: {content}")
2023-01-18 15:43:02 +01:00
printer.print_validity_buffer(validity_buffer=validity_buffer, num_vars=3)