fixed conflicts
This commit is contained in:
Jakob Meier
commit
364070752e
@ -43,3 +43,5 @@ class CustomServiceList(enum.Enum):
|
||||
STR_IMG_HELPER = "str_img_helper"
|
||||
SYRLINKS = "syrlinks"
|
||||
ACS_ASS = "acs-ass"
|
||||
SUS_ASS = "sus-ass"
|
||||
TCS_ASS = "tcs-ass"
|
||||
|
||||
@ -1,3 +1,4 @@
|
||||
<<<<<<< HEAD
|
||||
2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
@ -167,3 +168,173 @@
|
||||
13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s\core\CoreController.h
|
||||
13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s\core\CoreController.h
|
||||
13603;0x3523;REBOOT_HW;MEDIUM;;bsp_q7s\core\CoreController.h
|
||||
=======
|
||||
2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2203;0x089b;STORE_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2205;0x089d;STORING_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2211;0x08a3;INIT_DONE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2212;0x08a4;DUMP_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2213;0x08a5;DELETION_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2214;0x08a6;DELETION_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
|
||||
2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
|
||||
2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw/src/fsfw/power/PowerSwitchIF.h
|
||||
5000;0x1388;HEATER_ON;INFO;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5001;0x1389;HEATER_OFF;INFO;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
|
||||
5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
|
||||
5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
|
||||
5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
|
||||
7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
|
||||
7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
|
||||
7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7400;0x1ce8;CHANGING_MODE;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7401;0x1ce9;MODE_INFO;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7506;0x1d52;HEALTH_INFO;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
8900;0x22c4;CLOCK_SET;INFO;;fsfw/src/fsfw/pus/Service9TimeManagement.h
|
||||
8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw/src/fsfw/pus/Service9TimeManagement.h
|
||||
9700;0x25e4;TEST;INFO;;fsfw/src/fsfw/pus/Service17Test.h
|
||||
10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw/hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
|
||||
10800;0x2a30;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
|
||||
10801;0x2a31;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
|
||||
10802;0x2a32;SWITCHING_Q7S_DENIED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
|
||||
10900;0x2a94;GPIO_PULL_HIGH_FAILED;LOW;;mission/devices/HeaterHandler.h
|
||||
10901;0x2a95;GPIO_PULL_LOW_FAILED;LOW;;mission/devices/HeaterHandler.h
|
||||
10902;0x2a96;SWITCH_ALREADY_ON;LOW;;mission/devices/HeaterHandler.h
|
||||
10903;0x2a97;SWITCH_ALREADY_OFF;LOW;;mission/devices/HeaterHandler.h
|
||||
10904;0x2a98;MAIN_SWITCH_TIMEOUT;LOW;;mission/devices/HeaterHandler.h
|
||||
11000;0x2af8;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11001;0x2af9;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11002;0x2afa;DEPLOYMENT_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11003;0x2afb;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11004;0x2afc;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11101;0x2b5d;MEMORY_READ_RPT_CRC_FAILURE;LOW;;mission/devices/PlocMPSoCHandler.h
|
||||
11102;0x2b5e;ACK_FAILURE;LOW;;mission/devices/PlocMPSoCHandler.h
|
||||
11103;0x2b5f;EXE_FAILURE;LOW;;mission/devices/PlocMPSoCHandler.h
|
||||
11104;0x2b60;CRC_FAILURE_EVENT;LOW;;mission/devices/PlocMPSoCHandler.h
|
||||
11201;0x2bc1;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11202;0x2bc2;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11203;0x2bc3;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11204;0x2bc4;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11205;0x2bc5;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11206;0x2bc6;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11207;0x2bc7;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11208;0x2bc8;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/IMTQHandler.h
|
||||
11301;0x2c25;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/RwHandler.h
|
||||
11401;0x2c89;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
|
||||
11402;0x2c8a;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
|
||||
11501;0x2ced;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;bsp_q7s/devices/PlocSupervisorHandler.h
|
||||
11502;0x2cee;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;bsp_q7s/devices/PlocSupervisorHandler.h
|
||||
11503;0x2cef;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report;bsp_q7s/devices/PlocSupervisorHandler.h
|
||||
11504;0x2cf0;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;bsp_q7s/devices/PlocSupervisorHandler.h
|
||||
11600;0x2d50;SANITIZATION_FAILED;LOW;;bsp_q7s/memory/SdCardManager.h
|
||||
11601;0x2d51;MOUNTED_SD_CARD;INFO;;bsp_q7s/memory/SdCardManager.h
|
||||
11700;0x2db4;UPDATE_FILE_NOT_EXISTS;LOW;;bsp_q7s/devices/PlocUpdater.h
|
||||
11701;0x2db5;ACTION_COMMANDING_FAILED;LOW;Failed to send command to supervisor handler P1: Return value of CommandActionHelper::commandAction P2: Action ID of command to send;bsp_q7s/devices/PlocUpdater.h
|
||||
11702;0x2db6;UPDATE_AVAILABLE_FAILED;LOW;Supervisor handler replied action message indicating a command execution failure of the update available command;bsp_q7s/devices/PlocUpdater.h
|
||||
11703;0x2db7;UPDATE_TRANSFER_FAILED;LOW;Supervisor handler failed to transfer an update space packet. P1: Parameter holds the number of update packets already sent (inclusive the failed packet);bsp_q7s/devices/PlocUpdater.h
|
||||
11704;0x2db8;UPDATE_VERIFY_FAILED;LOW;Supervisor failed to execute the update verify command.;bsp_q7s/devices/PlocUpdater.h
|
||||
11705;0x2db9;UPDATE_FINISHED;INFO;MPSoC update successful completed;bsp_q7s/devices/PlocUpdater.h
|
||||
11800;0x2e18;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;bsp_q7s/devices/PlocMemoryDumper.h
|
||||
11801;0x2e19;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;bsp_q7s/devices/PlocMemoryDumper.h
|
||||
11802;0x2e1a;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;bsp_q7s/devices/PlocMemoryDumper.h
|
||||
11901;0x2e7d;INVALID_TC_FRAME;HIGH;;linux/obc/PdecHandler.h
|
||||
11902;0x2e7e;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/obc/PdecHandler.h
|
||||
11903;0x2e7f;CARRIER_LOCK;INFO;Carrier lock detected;linux/obc/PdecHandler.h
|
||||
11904;0x2e80;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux/obc/PdecHandler.h
|
||||
12000;0x2ee0;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrHelper.h
|
||||
12001;0x2ee1;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrHelper.h
|
||||
12002;0x2ee2;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrHelper.h
|
||||
12003;0x2ee3;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrHelper.h
|
||||
12004;0x2ee4;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrHelper.h
|
||||
12005;0x2ee5;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrHelper.h
|
||||
12006;0x2ee6;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrHelper.h
|
||||
12007;0x2ee7;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrHelper.h
|
||||
12008;0x2ee8;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrHelper.h
|
||||
12009;0x2ee9;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
|
||||
12010;0x2eea;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
|
||||
12011;0x2eeb;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux/devices/startracker/StrHelper.h
|
||||
12012;0x2eec;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrHelper.h
|
||||
12013;0x2eed;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrHelper.h
|
||||
12014;0x2eee;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrHelper.h
|
||||
12015;0x2eef;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux/devices/startracker/StrHelper.h
|
||||
12016;0x2ef0;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux/devices/startracker/StrHelper.h
|
||||
12100;0x2f44;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
|
||||
12101;0x2f45;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12102;0x2f46;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12103;0x2f47;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12104;0x2f48;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12105;0x2f49;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12106;0x2f4a;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12107;0x2f4b;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12108;0x2f4c;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12109;0x2f4d;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12110;0x2f4e;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12111;0x2f4f;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12200;0x2fa8;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/AcsBoardAssembly.h
|
||||
12201;0x2fa9;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/AcsBoardAssembly.h
|
||||
12202;0x2faa;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/AcsBoardAssembly.h
|
||||
12203;0x2fab;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/AcsBoardAssembly.h
|
||||
12300;0x300c;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/SusAssembly.h
|
||||
12301;0x300d;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/SusAssembly.h
|
||||
12302;0x300e;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/SusAssembly.h
|
||||
12303;0x300f;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/SusAssembly.h
|
||||
12400;0x3070;CHILDREN_LOST_MODE;MEDIUM;;mission/system/TcsBoardAssembly.h
|
||||
13600;0x3520;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
|
||||
13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
|
||||
13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
|
||||
13603;0x3523;REBOOT_HW;MEDIUM;;bsp_q7s/core/CoreController.h
|
||||
>>>>>>> develop
|
||||
|
||||
|
Can't render this file because it has a wrong number of fields in line 72.
|
@ -68,6 +68,8 @@ PL_PCDU_ID = bytes([0x44, 0x30, 0x00, 0x00])
|
||||
|
||||
# System and Assembly Objects
|
||||
ACS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x01])
|
||||
SUS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x02])
|
||||
TCS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x03])
|
||||
|
||||
|
||||
def get_object_ids() -> ObjectIdDictT:
|
||||
|
||||
@ -40,10 +40,8 @@
|
||||
0x44330000;PLOC_UPDATER
|
||||
0x44330001;PLOC_MEMORY_DUMPER
|
||||
0x44330002;STR_HELPER
|
||||
0x44330003;PLOC_MPSOC_HELPER
|
||||
0x44330015;PLOC_MPSOC_HANDLER
|
||||
0x44330016;PLOC_SUPERVISOR_HANDLER
|
||||
0x44330017;PLOC_SUPERVISOR_HELPER
|
||||
0x444100A2;SOLAR_ARRAY_DEPL_HANDLER
|
||||
0x444100A4;HEATER_HANDLER
|
||||
0x44420004;TMP1075_HANDLER_1
|
||||
|
||||
|
@ -471,6 +471,7 @@
|
||||
0x60a0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;0xA0;linux\devices\ploc\PlocMemoryDumper.h;PLOC_MEMORY_DUMPER
|
||||
0x60a1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;0xA1;linux\devices\ploc\PlocMemoryDumper.h;PLOC_MEMORY_DUMPER
|
||||
0x60d0;PLMEMDUMP_NameTooLong;Received command has file string with invalid length;0xD0;linux\devices\ploc\PlocMPSoCHandler.h;PLOC_MEMORY_DUMPER
|
||||
0x67a0; PLMPHLP_FileClosedAccidentally;File accidentally close;0xA0;linux\devices\ploc\PlocMPSoCHelper.h;PLOC_MPSOC_HELPER
|
||||
0x59a0;PLSV_CrcFailure;Space Packet received from PLOC supervisor has invalid CRC;0xA0;linux\devices\ploc\PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
|
||||
0x59a1;PLSV_ReceivedAckFailure;Received ACK failure reply from PLOC supervisor;0xA1;linux\devices\ploc\PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
|
||||
0x59a2;PLSV_ReceivedExeFailure;Received execution failure reply from PLOC supervisor;0xA2;linux\devices\ploc\PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
|
||||
|
||||
|
Can't render this file because it has a wrong number of fields in line 29.
|
@ -602,7 +602,8 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
|
||||
|
||||
|
||||
def add_system_cmds(cmd_dict: ServiceOpCodeDictT):
|
||||
from pus_tc.system.acs import AcsOpCodes
|
||||
from pus_tc.system.acs import AcsOpCodes, SusOpCodes
|
||||
import pus_tc.system.tcs as tcs
|
||||
|
||||
default_opts = generate_op_code_options(
|
||||
enter_listener_mode=False, custom_timeout=8.0
|
||||
@ -656,3 +657,55 @@ def add_system_cmds(cmd_dict: ServiceOpCodeDictT):
|
||||
info="ACS Assemblies",
|
||||
op_code_entry=op_code_dict,
|
||||
)
|
||||
|
||||
op_code_dict = dict()
|
||||
add_op_code_entry(
|
||||
op_code_dict=op_code_dict,
|
||||
keys=SusOpCodes.SUS_ASS_NOM_SIDE,
|
||||
info="Switch SUS board to nominal side",
|
||||
options=default_opts,
|
||||
)
|
||||
add_op_code_entry(
|
||||
op_code_dict=op_code_dict,
|
||||
keys=SusOpCodes.SUS_ASS_RED_SIDE,
|
||||
info="Switch SUS board to redundant side",
|
||||
options=default_opts,
|
||||
)
|
||||
add_op_code_entry(
|
||||
op_code_dict=op_code_dict,
|
||||
keys=SusOpCodes.SUS_ASS_OFF,
|
||||
info="Switch off SUS board",
|
||||
options=default_opts,
|
||||
)
|
||||
add_op_code_entry(
|
||||
op_code_dict=op_code_dict,
|
||||
keys=SusOpCodes.SUS_ASS_DUAL_MODE,
|
||||
info="Switch SUS board to dual mode",
|
||||
options=default_opts,
|
||||
)
|
||||
add_service_op_code_entry(
|
||||
srv_op_code_dict=cmd_dict,
|
||||
name=CustomServiceList.SUS_ASS.value,
|
||||
info="SUS Assembly",
|
||||
op_code_entry=op_code_dict,
|
||||
)
|
||||
|
||||
op_code_dict = dict()
|
||||
add_op_code_entry(
|
||||
op_code_dict=op_code_dict,
|
||||
keys=tcs.OpCodes.TCS_BOARD_ASS_NORMAL,
|
||||
info=tcs.Info.TCS_BOARD_ASS_NORMAL,
|
||||
options=default_opts,
|
||||
)
|
||||
add_op_code_entry(
|
||||
op_code_dict=op_code_dict,
|
||||
keys=tcs.OpCodes.TCS_BOARD_ASS_OFF,
|
||||
info=tcs.Info.TCS_BOARD_ASS_OFF,
|
||||
options=default_opts,
|
||||
)
|
||||
add_service_op_code_entry(
|
||||
srv_op_code_dict=cmd_dict,
|
||||
name=CustomServiceList.TCS_ASS.value,
|
||||
info="TCS Board Assembly",
|
||||
op_code_entry=op_code_dict,
|
||||
)
|
||||
|
||||
@ -1,21 +1,29 @@
|
||||
import enum
|
||||
from tmtccmd.tc.definitions import TcQueueT, QueueCommands
|
||||
from spacepackets.ecss.tc import PusTelecommand
|
||||
from tmtccmd.tc.service_200_mode import pack_mode_data, Modes, Subservices
|
||||
from config.object_ids import ACS_BOARD_ASS_ID
|
||||
from tmtccmd.tc.definitions import TcQueueT
|
||||
from tmtccmd.tc.service_200_mode import Modes
|
||||
from config.object_ids import ACS_BOARD_ASS_ID, SUS_BOARD_ASS_ID
|
||||
|
||||
from .common import command_assembly
|
||||
|
||||
|
||||
class AcsOpCodes:
|
||||
ACS_ASS_A_SIDE = ["0", "a"]
|
||||
ACS_ASS_B_SIDE = ["1", "b"]
|
||||
ACS_ASS_DUAL_MODE = ["2", "d"]
|
||||
ACS_ASS_OFF = ["3", "off"]
|
||||
ACS_ASS_A_ON = ["4", "ao"]
|
||||
ACS_ASS_B_ON = ["5", "bo"]
|
||||
ACS_ASS_DUAL_ON = ["6", "do"]
|
||||
ACS_ASS_A_SIDE = ["0", "acs-a"]
|
||||
ACS_ASS_B_SIDE = ["1", "acs-b"]
|
||||
ACS_ASS_DUAL_MODE = ["2", "acs-d"]
|
||||
ACS_ASS_OFF = ["3", "acs-off"]
|
||||
ACS_ASS_A_ON = ["4", "acs-ao"]
|
||||
ACS_ASS_B_ON = ["5", "acs-bo"]
|
||||
ACS_ASS_DUAL_ON = ["6", "acs-do"]
|
||||
|
||||
|
||||
class AcsBoardSubmodes(enum.IntEnum):
|
||||
class SusOpCodes:
|
||||
SUS_ASS_NOM_SIDE = ["0", "sus-nom"]
|
||||
SUS_ASS_RED_SIDE = ["1", "sus-red"]
|
||||
SUS_ASS_DUAL_MODE = ["2", "sus-d"]
|
||||
SUS_ASS_OFF = ["3", "sus-off"]
|
||||
|
||||
|
||||
class DualSideSubmodes(enum.IntEnum):
|
||||
A_SIDE = 0
|
||||
B_SIDE = 1
|
||||
DUAL_SIDE = 2
|
||||
@ -23,61 +31,93 @@ class AcsBoardSubmodes(enum.IntEnum):
|
||||
|
||||
def pack_acs_command(tc_queue: TcQueueT, op_code: str):
|
||||
if op_code in AcsOpCodes.ACS_ASS_A_SIDE:
|
||||
tc_queue.appendleft(
|
||||
(QueueCommands.PRINT, "Switching to ACS board assembly A side")
|
||||
)
|
||||
command_acs_board(
|
||||
mode=Modes.NORMAL, submode=AcsBoardSubmodes.A_SIDE, tc_queue=tc_queue
|
||||
command_assembly(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=Modes.NORMAL,
|
||||
submode=DualSideSubmodes.A_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching to ACS board assembly A side",
|
||||
)
|
||||
if op_code in AcsOpCodes.ACS_ASS_B_SIDE:
|
||||
tc_queue.appendleft(
|
||||
(QueueCommands.PRINT, "Switching to ACS board assembly B side")
|
||||
)
|
||||
command_acs_board(
|
||||
mode=Modes.NORMAL, submode=AcsBoardSubmodes.B_SIDE, tc_queue=tc_queue
|
||||
command_assembly(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=Modes.NORMAL,
|
||||
submode=DualSideSubmodes.B_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching to ACS board assembly B side",
|
||||
)
|
||||
if op_code in AcsOpCodes.ACS_ASS_DUAL_MODE:
|
||||
tc_queue.appendleft(
|
||||
(QueueCommands.PRINT, "Switching to ACS board assembly dual mode")
|
||||
)
|
||||
command_acs_board(
|
||||
mode=Modes.NORMAL, submode=AcsBoardSubmodes.DUAL_SIDE, tc_queue=tc_queue
|
||||
command_assembly(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=Modes.NORMAL,
|
||||
submode=DualSideSubmodes.DUAL_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching to ACS board assembly dual mode",
|
||||
)
|
||||
if op_code in AcsOpCodes.ACS_ASS_A_ON:
|
||||
tc_queue.appendleft(
|
||||
(QueueCommands.PRINT, "Switching ACS board assembly A side on")
|
||||
)
|
||||
command_acs_board(
|
||||
mode=Modes.ON, submode=AcsBoardSubmodes.A_SIDE, tc_queue=tc_queue
|
||||
command_assembly(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=Modes.ON,
|
||||
submode=DualSideSubmodes.A_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching ACS board assembly A side on",
|
||||
)
|
||||
if op_code in AcsOpCodes.ACS_ASS_B_ON:
|
||||
tc_queue.appendleft(
|
||||
(QueueCommands.PRINT, "Switching ACS board assembly B side on")
|
||||
)
|
||||
command_acs_board(
|
||||
mode=Modes.ON, submode=AcsBoardSubmodes.B_SIDE, tc_queue=tc_queue
|
||||
command_assembly(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=Modes.ON,
|
||||
submode=DualSideSubmodes.B_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching ACS board assembly B side on",
|
||||
)
|
||||
if op_code in AcsOpCodes.ACS_ASS_DUAL_ON:
|
||||
tc_queue.appendleft(
|
||||
(QueueCommands.PRINT, "Switching ACS board assembly dual side on")
|
||||
)
|
||||
command_acs_board(
|
||||
mode=Modes.ON, submode=AcsBoardSubmodes.B_SIDE, tc_queue=tc_queue
|
||||
command_assembly(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=Modes.ON,
|
||||
submode=DualSideSubmodes.B_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching ACS board assembly dual side on",
|
||||
)
|
||||
if op_code in AcsOpCodes.ACS_ASS_OFF:
|
||||
tc_queue.appendleft(
|
||||
(QueueCommands.PRINT, "Switching to ACS board assembly off")
|
||||
command_assembly(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=Modes.OFF,
|
||||
submode=0,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching to ACS board assembly off",
|
||||
)
|
||||
command_acs_board(mode=Modes.OFF, submode=0, tc_queue=tc_queue)
|
||||
|
||||
|
||||
def command_acs_board(mode: Modes, submode: int, tc_queue: TcQueueT):
|
||||
mode_data = pack_mode_data(
|
||||
object_id=ACS_BOARD_ASS_ID,
|
||||
mode=mode,
|
||||
submode=submode,
|
||||
)
|
||||
cmd = PusTelecommand(
|
||||
service=200, subservice=Subservices.COMMAND_MODE_COMMAND, app_data=mode_data
|
||||
)
|
||||
tc_queue.appendleft(cmd.pack_command_tuple())
|
||||
def pack_sus_cmds(tc_queue: TcQueueT, op_code: str):
|
||||
if op_code in SusOpCodes.SUS_ASS_NOM_SIDE:
|
||||
command_assembly(
|
||||
object_id=SUS_BOARD_ASS_ID,
|
||||
mode=Modes.NORMAL,
|
||||
submode=DualSideSubmodes.A_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching to SUS board to nominal side",
|
||||
)
|
||||
if op_code in SusOpCodes.SUS_ASS_RED_SIDE:
|
||||
command_assembly(
|
||||
object_id=SUS_BOARD_ASS_ID,
|
||||
mode=Modes.NORMAL,
|
||||
submode=DualSideSubmodes.B_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching to SUS board to redundant side",
|
||||
)
|
||||
if op_code in SusOpCodes.SUS_ASS_OFF:
|
||||
command_assembly(
|
||||
object_id=SUS_BOARD_ASS_ID,
|
||||
mode=Modes.OFF,
|
||||
submode=0,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching SUS board off",
|
||||
)
|
||||
if op_code in SusOpCodes.SUS_ASS_DUAL_MODE:
|
||||
command_assembly(
|
||||
object_id=SUS_BOARD_ASS_ID,
|
||||
mode=Modes.NORMAL,
|
||||
submode=DualSideSubmodes.DUAL_SIDE,
|
||||
tc_queue=tc_queue,
|
||||
info="Switching to SUS board to dual side",
|
||||
)
|
||||
|
||||
18
pus_tc/system/common.py
Normal file
18
pus_tc/system/common.py
Normal file
@ -0,0 +1,18 @@
|
||||
from tmtccmd.tc.definitions import TcQueueT, QueueCommands
|
||||
from spacepackets.ecss.tc import PusTelecommand
|
||||
from tmtccmd.tc.service_200_mode import pack_mode_data, Modes, Subservices
|
||||
|
||||
|
||||
def command_assembly(
|
||||
object_id: bytes, mode: Modes, submode: int, tc_queue: TcQueueT, info: str
|
||||
):
|
||||
tc_queue.appendleft((QueueCommands.PRINT, info))
|
||||
mode_data = pack_mode_data(
|
||||
object_id=object_id,
|
||||
mode=mode,
|
||||
submode=submode,
|
||||
)
|
||||
cmd = PusTelecommand(
|
||||
service=200, subservice=Subservices.COMMAND_MODE_COMMAND, app_data=mode_data
|
||||
)
|
||||
tc_queue.appendleft(cmd.pack_command_tuple())
|
||||
34
pus_tc/system/tcs.py
Normal file
34
pus_tc/system/tcs.py
Normal file
@ -0,0 +1,34 @@
|
||||
from tmtccmd.tc.definitions import TcQueueT, QueueCommands
|
||||
from tmtccmd.tc.service_200_mode import Modes
|
||||
|
||||
from .common import command_assembly
|
||||
from config.object_ids import TCS_BOARD_ASS_ID
|
||||
|
||||
|
||||
class OpCodes:
|
||||
TCS_BOARD_ASS_NORMAL = ["0", "tcs-normal"]
|
||||
TCS_BOARD_ASS_OFF = ["1", "tcs-off"]
|
||||
|
||||
|
||||
class Info:
|
||||
TCS_BOARD_ASS_NORMAL = "Switching TCS board assembly on"
|
||||
TCS_BOARD_ASS_OFF = "Switching TCS board assembly off"
|
||||
|
||||
|
||||
def pack_tcs_sys_commands(tc_queue: TcQueueT, op_code: str):
|
||||
if op_code in OpCodes.TCS_BOARD_ASS_NORMAL:
|
||||
command_assembly(
|
||||
object_id=TCS_BOARD_ASS_ID,
|
||||
mode=Modes.NORMAL,
|
||||
submode=0,
|
||||
tc_queue=tc_queue,
|
||||
info=Info.TCS_BOARD_ASS_NORMAL,
|
||||
)
|
||||
if op_code in OpCodes.TCS_BOARD_ASS_OFF:
|
||||
command_assembly(
|
||||
object_id=TCS_BOARD_ASS_ID,
|
||||
mode=Modes.OFF,
|
||||
submode=0,
|
||||
tc_queue=tc_queue,
|
||||
info=Info.TCS_BOARD_ASS_OFF,
|
||||
)
|
||||
@ -31,9 +31,10 @@ from pus_tc.system.core import pack_core_commands
|
||||
from pus_tc.devs.star_tracker import pack_star_tracker_commands
|
||||
from pus_tc.devs.syrlinks_hk_handler import pack_syrlinks_command
|
||||
from pus_tc.devs.gps import pack_gps_command
|
||||
from pus_tc.system.acs import pack_acs_command
|
||||
from pus_tc.system.acs import pack_acs_command, pack_sus_cmds
|
||||
from pus_tc.devs.plpcdu import pack_pl_pcdu_commands
|
||||
from pus_tc.devs.str_img_helper import pack_str_img_helper_command
|
||||
from pus_tc.system.tcs import pack_tcs_sys_commands
|
||||
from config.definitions import CustomServiceList
|
||||
from config.object_ids import (
|
||||
P60_DOCK_HANDLER,
|
||||
@ -120,7 +121,9 @@ def pack_service_queue_user(
|
||||
)
|
||||
if service == CustomServiceList.PLOC_MPSOC.value:
|
||||
object_id = PLOC_MPSOC_ID
|
||||
return pack_ploc_mpsoc_commands(object_id=object_id, tc_queue=service_queue, op_code=op_code)
|
||||
return pack_ploc_mpsoc_commands(
|
||||
object_id=object_id, tc_queue=service_queue, op_code=op_code
|
||||
)
|
||||
if service == CustomServiceList.REACTION_WHEEL_1.value:
|
||||
object_id = RW1_ID
|
||||
return pack_single_rw_test_into(
|
||||
@ -199,10 +202,14 @@ def pack_service_queue_user(
|
||||
return pack_solar_array_deployment_test_into(
|
||||
object_id=SOLAR_ARRAY_DEPLOYMENT_ID, tc_queue=service_queue
|
||||
)
|
||||
if service == CustomServiceList.SUS_ASS.value:
|
||||
return pack_sus_cmds(tc_queue=service_queue, op_code=op_code)
|
||||
if service == CustomServiceList.PL_PCDU.value:
|
||||
return pack_pl_pcdu_commands(tc_queue=service_queue, op_code=op_code)
|
||||
if service == CustomServiceList.ACS_ASS.value:
|
||||
return pack_acs_command(tc_queue=service_queue, op_code=op_code)
|
||||
if service == CustomServiceList.TCS_ASS.value:
|
||||
return pack_tcs_sys_commands(tc_queue=service_queue, op_code=op_code)
|
||||
LOGGER.warning("Invalid Service !")
|
||||
|
||||
|
||||
|
||||
@ -69,8 +69,11 @@ def handle_ploc_replies(action_id: int, custom_data: bytearray) -> DataReplyUnpa
|
||||
"PLOC Mem Len",
|
||||
"PLOC Read Memory Data",
|
||||
]
|
||||
reply.content_list = ["0x" + custom_data[:4].hex(), struct.unpack('!H', custom_data[4:6])[0],
|
||||
"0x" + custom_data[6:10].hex()]
|
||||
reply.content_list = [
|
||||
"0x" + custom_data[:4].hex(),
|
||||
struct.unpack("!H", custom_data[4:6])[0],
|
||||
"0x" + custom_data[6:10].hex(),
|
||||
]
|
||||
return reply
|
||||
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user