Merge branch 'develop' into mueller/rtd-cmds

This commit is contained in:
Robin Müller 2022-05-23 18:30:29 +02:00
commit 427efab44e
9 changed files with 153 additions and 73 deletions

View File

@ -10,6 +10,18 @@ list yields a list of all related PRs for each release.
# [unreleased]
# [v1.12.0]
- Add Rad Sensor HK parsing
PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/81
- Add procedures, parser functions and general application functionalities
for the thermal-vacuum test. This includes daemon functionality to poll
all Telemetry even when there is no operator present
PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/76
https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/74
https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/79
https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/73
# [v1.11.0]
- Add `setup.cfg` and `setup.py` file, allowing package installation

View File

@ -1,4 +1,5 @@
from pus_tc.devs.gps import GpsOpCodes
from pus_tc.devs.rad_sensor import add_rad_sens_cmds
from tmtccmd.config import (
add_op_code_entry,
add_service_op_code_entry,
@ -777,20 +778,6 @@ def add_imtq_cmds(cmd_dict: ServiceOpCodeDictT):
cmd_dict[CustomServiceList.IMTQ.value] = service_imtq_tuple
def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_rad_sensor = {
"0": ("Radiation Sensor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("Radiation Sensor: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("Radiation Sensor: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("Radiation Sensor: Start conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("Radiation Sensor: Read conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": ("Radiation Sensor: Enable debug output", {OpCodeDictKeys.TIMEOUT: 2.0}),
"6": ("Radiation Sensor: Disable debug putput", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_rad_sensor_tuple = ("Radiation Sensor", op_code_dict_srv_rad_sensor)
cmd_dict[CustomServiceList.RAD_SENSOR.value] = service_rad_sensor_tuple
def add_ploc_mpsoc_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_ploc_mpsoc = {
"0": ("Ploc MPSoC: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),

View File

@ -7,11 +7,37 @@
"""
import struct
from tmtccmd.config.definitions import QueueCommands
from config.definitions import CustomServiceList
from tmtccmd.config import add_op_code_entry, add_service_op_code_entry
from tmtccmd.config.definitions import QueueCommands, ServiceOpCodeDictT, OpCodeDictKeys
from tmtccmd.tc.packer import TcQueueT
from spacepackets.ecss.tc import PusTelecommand
from pus_tc.service_200_mode import pack_mode_data, Modes
from tmtccmd.tc.pus_3_fsfw_hk import generate_one_hk_command, make_sid
from tmtccmd.utility import ObjectId
class SetIds:
HK = 3
class OpCodes:
ON = ["0", "on"]
NORMAL = ["1", "normal"]
OFF = ["2", "off"]
REQ_HK_ONCE = ["3", "hk-os"]
DEBUG_ON = ["10", "dbg-on"]
DEBUG_OFF = ["11", "dbg-off"]
class Info:
ON = "Switch Rad Sensor on"
NORMAL = "Switch Rad Sensor normal"
OFF = "Switch Rad sensor off"
REQ_OS_HK = "Request one-shot HK"
DEBUG_ON = "Switch debug output on"
DEBUG_OFF = "Switch debug output off"
class CommandIds:
@ -21,52 +47,64 @@ class CommandIds:
DISABLE_DEBUG_OUTPUT = 5
def pack_rad_sensor_test_into(object_id: bytearray, tc_queue: TcQueueT, op_code: str):
tc_queue.appendleft(
(
QueueCommands.PRINT,
"Testing radiation sensor handler with object id: 0x" + object_id.hex(),
)
def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict = dict()
add_op_code_entry(op_code_dict=op_code_dict, info=Info.ON, keys=OpCodes.ON)
add_op_code_entry(op_code_dict=op_code_dict, info=Info.OFF, keys=OpCodes.OFF)
add_op_code_entry(op_code_dict=op_code_dict, info=Info.NORMAL, keys=OpCodes.NORMAL)
add_op_code_entry(
op_code_dict=op_code_dict, info=Info.REQ_OS_HK, keys=OpCodes.REQ_HK_ONCE
)
add_op_code_entry(
op_code_dict=op_code_dict, info=Info.DEBUG_ON, keys=OpCodes.DEBUG_ON
)
add_op_code_entry(
op_code_dict=op_code_dict, info=Info.DEBUG_OFF, keys=OpCodes.DEBUG_OFF
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.RAD_SENSOR.value,
info="Radiation Sensor",
op_code_entry=op_code_dict,
)
if op_code == "0":
tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode on"))
mode_data = pack_mode_data(object_id, Modes.ON, 0)
command = PusTelecommand(service=200, subservice=1, ssc=41, app_data=mode_data)
tc_queue.appendleft(command.pack_command_tuple())
if op_code == "1":
tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode normal"))
mode_data = pack_mode_data(object_id, Modes.NORMAL, 0)
command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
tc_queue.appendleft(command.pack_command_tuple())
def pack_rad_sensor_test_into(object_id: ObjectId, tc_queue: TcQueueT, op_code: str):
tc_queue.appendleft(
(QueueCommands.PRINT, f"Commanding Radiation sensor handler {object_id}")
)
if op_code == "2":
tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode off"))
mode_data = pack_mode_data(object_id, Modes.OFF, 0)
command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
if op_code in OpCodes.ON:
rad_sensor_mode_cmd(object_id, Modes.ON, Info.ON, tc_queue)
if op_code in OpCodes.NORMAL:
rad_sensor_mode_cmd(object_id, Modes.NORMAL, Info.NORMAL, tc_queue)
if op_code in OpCodes.OFF:
rad_sensor_mode_cmd(object_id, Modes.OFF, Info.OFF, tc_queue)
if op_code in OpCodes.REQ_HK_ONCE:
tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.REQ_OS_HK}"))
cmd = generate_one_hk_command(
sid=make_sid(object_id.as_bytes, set_id=SetIds.HK), ssc=0
)
tc_queue.appendleft(cmd.pack_command_tuple())
if op_code in OpCodes.DEBUG_ON:
tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.DEBUG_ON}"))
command = object_id.as_bytes + struct.pack("!I", CommandIds.ENABLE_DEBUG_OUTPUT)
command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
tc_queue.appendleft(command.pack_command_tuple())
if op_code == "3":
tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Start conversions"))
command = object_id + struct.pack("!I", CommandIds.START_CONVERSIONS)
command = PusTelecommand(service=8, subservice=128, ssc=43, app_data=command)
tc_queue.appendleft(command.pack_command_tuple())
if op_code == "4":
tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Read conversions"))
command = object_id + struct.pack("!I", CommandIds.READ_CONVERSIONS)
command = PusTelecommand(service=8, subservice=128, ssc=44, app_data=command)
tc_queue.appendleft(command.pack_command_tuple())
if op_code == "5":
tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Enable debug output"))
command = object_id + struct.pack("!I", CommandIds.ENABLE_DEBUG_OUTPUT)
if op_code in OpCodes.DEBUG_OFF:
tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.DEBUG_OFF}"))
command = object_id.as_bytes + struct.pack(
"!I", CommandIds.DISABLE_DEBUG_OUTPUT
)
command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
tc_queue.appendleft(command.pack_command_tuple())
if op_code == "6":
tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Disable debug output"))
command = object_id + struct.pack("!I", CommandIds.DISABLE_DEBUG_OUTPUT)
command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
tc_queue.appendleft(command.pack_command_tuple())
def rad_sensor_mode_cmd(
object_id: ObjectId, mode: Modes, info: str, tc_queue: TcQueueT
):
tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {info}"))
mode_data = pack_mode_data(object_id.as_bytes, mode, 0)
command = PusTelecommand(service=200, subservice=1, ssc=41, app_data=mode_data)
tc_queue.appendleft(command.pack_command_tuple())

View File

@ -1,5 +1,11 @@
from PyQt5.QtWidgets import (
QDialog, QDialogButtonBox, QVBoxLayout, QLabel, QGroupBox, QGridLayout, QLineEdit
QDialog,
QDialogButtonBox,
QVBoxLayout,
QLabel,
QGroupBox,
QGridLayout,
QLineEdit,
)
from PyQt5 import QtCore
@ -16,12 +22,13 @@ class Parameter:
self.widget = widget
self.value = self.defaultValue
self.widget.setPlaceholderText(self.defaultValue)
def reset(self):
self.value = self.defaultValue
self.widget.setPlaceholderText(self.defaultValue)
self.widget.setText("")
class ParameterDialog(QDialog):
def __init__(self):
super().__init__()
@ -42,7 +49,7 @@ class ParameterDialog(QDialog):
self.rootLayout.addWidget(self.group)
self.rootLayout.addWidget(self.buttonBox)
self.setLayout(self.rootLayout)
self.groupLayout = QGridLayout()
self.group.setLayout(self.groupLayout)
@ -59,7 +66,6 @@ class ParameterDialog(QDialog):
self.parameters[name] = parameter
def _reset(self):
for value in self.parameters.values():
value.reset()
@ -80,14 +86,13 @@ class ParameterDialog(QDialog):
super().reject()
"""Prompt the user to specify additional Parameters
:param parameterList: array of dictionaries with name and defaultValue attributes
:return: dict with all names as key and user supplied input as value string
"""
def prompt_parameters(parameterList):
gui = get_global(CoreGlobalIds.GUI)
mode = get_global(CoreGlobalIds.MODE)
@ -95,9 +100,10 @@ def prompt_parameters(parameterList):
# gui only works in cont mode right now
if gui and mode == CoreModeList.CONTINUOUS_MODE:
return _gui_prompt(parameterList)
else:
else:
return _cli_prompt(parameterList)
def _gui_prompt(parameterList):
dialog = ParameterDialog()
for parameter in parameterList:
@ -105,11 +111,14 @@ def _gui_prompt(parameterList):
dialog.exec_()
return dialog.getParameters()
def _cli_prompt(parameterList):
result = {}
for parameter in parameterList:
userInput = input("Specify {} [{}]: ".format(parameter["name"], parameter["defaultValue"]))
userInput = input(
"Specify {} [{}]: ".format(parameter["name"], parameter["defaultValue"])
)
if userInput == "":
userInput = parameter["defaultValue"]
result[parameter["name"]] = userInput
return result
return result

View File

@ -18,8 +18,12 @@ class Info:
def pack_controller_commands(tc_queue: TcQueueT, op_code: str):
parameters = prompt_parameters([{"name": "Mode", "defaultValue": "2"}, {
"name": "Submode", "defaultValue": "0"}])
parameters = prompt_parameters(
[
{"name": "Mode", "defaultValue": "2"},
{"name": "Submode", "defaultValue": "0"},
]
)
mode = int(parameters["Mode"])
if mode < 0 or mode > 2:
print("Invalid Mode, defaulting to OFF")

View File

@ -70,6 +70,7 @@ from config.object_ids import (
SYRLINKS_HANDLER_ID,
SOLAR_ARRAY_DEPLOYMENT_ID,
RW_ASSEMBLY,
get_object_ids,
)
@ -99,6 +100,7 @@ def pre_tc_send_cb(
def pack_service_queue_user(
service: Union[str, int], op_code: str, service_queue: TcQueueT
):
obj_id_man = get_object_ids()
if service == CoreServiceList.SERVICE_5.value:
return pack_generic_service5_test_into(tc_queue=service_queue)
if service == CoreServiceList.SERVICE_17.value:
@ -173,7 +175,7 @@ def pack_service_queue_user(
object_id=RW4_ID, rw_idx=4, tc_queue=service_queue, op_code=op_code
)
if service == CustomServiceList.RAD_SENSOR.value:
object_id = RAD_SENSOR_ID
object_id = obj_id_man.get(RAD_SENSOR_ID)
return pack_rad_sensor_test_into(
object_id=object_id, tc_queue=service_queue, op_code=op_code
)

24
pus_tm/devs/rad_sensor.py Normal file
View File

@ -0,0 +1,24 @@
import struct
from pus_tm.defs import PrintWrapper
from tmtccmd.utility.tmtc_printer import FsfwTmTcPrinter
from pus_tc.devs.rad_sensor import SetIds
def handle_rad_sensor_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
if set_id == SetIds.HK:
pw = PrintWrapper(printer)
current_idx = 0
pw.dlog("Received Radiation Sensor HK data")
fmt_str = "!fHHHHHH"
inc_len = struct.calcsize(fmt_str)
(temp, ain0, ain1, ain4, ain5, ain6, ain7) = struct.unpack(
fmt_str, hk_data[current_idx : current_idx + inc_len]
)
ain_dict = {0: ain0, 1: ain1, 4: ain4, 5: ain5, 6: ain6, 7: ain7}
pw.dlog(f"Temperature: {temp} C")
pw.dlog(f"AIN Channel | Raw Value (hex) | Raw Value (dec)")
for idx, val in ain_dict.items():
pw.dlog(f"{idx} | {val:#06x} | {str(val).ljust(5)}")
current_idx += inc_len
printer.print_validity_buffer(validity_buffer=hk_data[current_idx:], num_vars=7)

View File

@ -1,6 +1,7 @@
"""HK Handling for EIVE OBSW"""
import struct
from pus_tm.devs.rad_sensor import handle_rad_sensor_data
from pus_tm.system.tcs import handle_thermal_controller_hk_data, TM_TCP_SERVER
from tmtccmd.config.definitions import HkReplyUnpacked
from tmtccmd.tm.pus_3_fsfw_hk import (
@ -92,6 +93,8 @@ def handle_regular_hk_print(
return handle_pdu_data(
printer=printer, pdu_idx=2, set_id=set_id, hk_data=hk_data
)
if objb == obj_ids.RAD_SENSOR_ID:
return handle_rad_sensor_data(printer=printer, hk_data=hk_data, set_id=set_id)
if objb in [obj_ids.RW1_ID, obj_ids.RW2_ID, obj_ids.RW3_ID, obj_ids.RW4_ID]:
return handle_rw_hk_data(
printer=printer, object_id=object_id, set_id=set_id, hk_data=hk_data

View File

@ -2,10 +2,11 @@
"""TMTC commander for EIVE"""
from tmtcc import tmtcc_post_args, tmtcc_pre_args
from tmtccmd.config.args import (
create_default_args_parser,
add_gui_tmtccmd_args,
parse_gui_input_arguments,
)
create_default_args_parser,
add_gui_tmtccmd_args,
parse_gui_input_arguments,
)
def main():
hook_obj = tmtcc_pre_args()