Merge remote-tracking branch 'origin/main' into mueller/pus-15-tm-storage

CHANGELOG.md

@@ -15,6 +15,7 @@ tmtccmd version 4.0.0
 ## Added
 
 - Basic persistent TM store commanding
+- System and TCS system announce mode commands
 
 ## Changed
 

eive_tmtc/tmtc/system.py

@@ -7,18 +7,24 @@ from tmtccmd.config.tmtc import (
 )
 from tmtccmd.tc import service_provider
 from eive_tmtc.config.object_ids import EIVE_SYSTEM_ID
-from tmtccmd.tc.pus_200_fsfw_mode import create_mode_command, Mode
+from tmtccmd.tc.pus_200_fsfw_mode import (
+    create_mode_command,
+    Mode,
+    create_announce_mode_recursive_command,
+)
 from tmtccmd.tc.decorator import ServiceProviderParams
 
 
 class OpCode:
     SAFE_MODE = "safe"
     IDLE_MODE = "idle"
+    ANNOUNCE_MODES = "announce_modes"
 
 
 class Info:
     SAFE_MODE = "Command System into Safe Mode"
     IDLE_MODE = "Command System into Idle Pointing Mode"
+    ANNOUNCE_MODES = "Announce mode recursively"
 
 
 @service_provider(CustomServiceList.SYSTEM.value)
@@ -32,6 +38,9 @@ def build_system_cmds(p: ServiceProviderParams):
     elif o == OpCode.IDLE_MODE:
         q.add_log_cmd(f"{prefix}: {Info.IDLE_MODE}")
         q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, AcsMode.IDLE, 0))
+    elif o == OpCode.ANNOUNCE_MODES:
+        q.add_log_cmd(f"{prefix}: {Info.ANNOUNCE_MODES}")
+        q.add_pus_tc(create_announce_mode_recursive_command(EIVE_SYSTEM_ID))
 
 
 @tmtc_definitions_provider
@@ -39,6 +48,7 @@ def add_system_cmd_defs(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
     oce.add(keys=OpCode.SAFE_MODE, info=Info.SAFE_MODE)
     oce.add(keys=OpCode.IDLE_MODE, info=Info.IDLE_MODE)
+    oce.add(keys=OpCode.ANNOUNCE_MODES, info=Info.ANNOUNCE_MODES)
     defs.add_service(
         name=CustomServiceList.SYSTEM.value,
         info="EIVE system commands",

eive_tmtc/tmtc/tcs/defs.py

@@ -5,3 +5,4 @@ class CtrlSetId(enum.IntEnum):
     PRIMARY_SENSORS = 0
     DEVICE_SENSORS = 1
     SUS_TEMP_SENSORS = 2
+    HEATER_INFO = 4

eive_tmtc/tmtc/tcs/heater.py

@@ -32,6 +32,18 @@ class Heater(enum.IntEnum):
     NUMBER_OF_SWITCHES = 8
 
 
+HEATER_LOCATION = [
+    "OBC Board",
+    "PLOC Processing Board",
+    "ACS Board",
+    "PCDU PDU",
+    "Camera",
+    "Startracker",
+    "DRO",
+    "HPA",
+]
+
+
 class OpCode:
     HEATER_CMD = ["switch_cmd"]
     HEATER_EXT_CTRL = ["set_ext_ctrl"]

eive_tmtc/tmtc/tcs/subsystem.py

@@ -9,8 +9,12 @@ from tmtccmd.config.tmtc import (
     OpCodeEntry,
 )
 from tmtccmd.tc import DefaultPusQueueHelper
-from tmtccmd.tc.pus_200_fsfw_mode import Mode
-from tmtccmd.tc.pus_3_fsfw_hk import make_sid, generate_one_hk_command
+from tmtccmd.tc.pus_200_fsfw_mode import Mode, create_announce_mode_recursive_command
+from tmtccmd.tc.pus_3_fsfw_hk import (
+    make_sid,
+    generate_one_hk_command,
+    create_request_one_diag_command,
+)
 
 
 class OpCodeSys:
@@ -19,6 +23,8 @@ class OpCodeSys:
     REQUEST_PRIMARY_TEMP_SET = ["temp"]
     REQUEST_DEVICE_TEMP_SET = ["temp_devs"]
     REQUEST_DEVICE_SUS_SET = ["temp_sus"]
+    REQUEST_HEATER_INFO = "heater_info"
+    ANNOUNCE_MODES = "announce_modes"
 
 
 class InfoSys:
@@ -27,6 +33,8 @@ class InfoSys:
     REQUEST_PRIMARY_TEMP_SET = "Request HK set of primary sensor temperatures"
     REQUEST_DEVICE_TEMP_SET = "Request HK set of device sensor temperatures"
     REQUEST_DEVICE_SUS_SET = "Request HK set of the SUS temperatures"
+    REQUEST_HEATER_INFO = "Request heater information"
+    ANNOUNCE_MODES = "Announce Modes recursively"
 
 
 def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
@@ -46,12 +54,22 @@ def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
                 make_sid(TCS_CONTROLLER, CtrlSetId.SUS_TEMP_SENSORS)
             )
         )
+    if op_code == OpCodeSys.REQUEST_HEATER_INFO:
+        q.add_log_cmd(InfoSys.REQUEST_HEATER_INFO)
+        q.add_pus_tc(
+            create_request_one_diag_command(
+                make_sid(TCS_CONTROLLER, CtrlSetId.HEATER_INFO)
+            )
+        )
     if op_code in OpCodeSys.OFF:
         q.add_log_cmd(InfoSys.OFF)
         pack_mode_cmd_with_info(TCS_SUBSYSTEM_ID, Mode.OFF, 0, q, InfoSys.OFF)
     if op_code in OpCodeSys.NML:
         q.add_log_cmd(InfoSys.NML)
         pack_mode_cmd_with_info(TCS_SUBSYSTEM_ID, Mode.NORMAL, 0, q, InfoSys.OFF)
+    if op_code == OpCodeSys.ANNOUNCE_MODES:
+        q.add_log_cmd(InfoSys.ANNOUNCE_MODES)
+        q.add_pus_tc(create_announce_mode_recursive_command(TCS_SUBSYSTEM_ID))
     pack_tcs_ass_cmds(q, op_code)
 
 
@@ -67,6 +85,8 @@ def add_tcs_subsystem_cmds(defs: TmtcDefinitionWrapper):
         keys=OpCodeSys.REQUEST_DEVICE_TEMP_SET, info=InfoSys.REQUEST_DEVICE_TEMP_SET
     )
     oce.add(keys=OpCodeSys.REQUEST_DEVICE_SUS_SET, info=InfoSys.REQUEST_DEVICE_SUS_SET)
+    oce.add(keys=OpCodeSys.REQUEST_HEATER_INFO, info=InfoSys.REQUEST_HEATER_INFO)
+    oce.add(keys=OpCodeSys.ANNOUNCE_MODES, info=InfoSys.ANNOUNCE_MODES)
     defs.add_service(
         name=CustomServiceList.TCS,
         info="TCS Board",

eive_tmtc/tmtc/tcs/tm.py

@@ -1,10 +1,16 @@
+import logging
 import pprint
 import struct
 
 from eive_tmtc.pus_tm.defs import PrintWrapper
+from tmtccmd.fsfw import validity_buffer_list
 from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 from .defs import CtrlSetId
+from .heater import HEATER_LOCATION
+
+
+_LOGGER = logging.getLogger(__name__)
 
 
 def handle_thermal_controller_hk_data(
@@ -22,7 +28,10 @@ def handle_thermal_controller_hk_data(
         pw.dlog("Received sensor temperature data")
 
         # get all the floats
-        tm_data = struct.unpack("!fffffffffffffffffffff", hk_data[: 21 * 4])
+        fmt_str = "!fffffffffffffffffffff"
+        fmt_len = struct.calcsize(fmt_str)
+        tm_data = struct.unpack(fmt_str, hk_data[:fmt_len])
+        valid_list = validity_buffer_list(hk_data[fmt_len:], 21)
         parsed_data = {
             "SENSOR_PLOC_HEATSPREADER": tm_data[0],
             "SENSOR_PLOC_MISSIONBOARD": tm_data[1],
@@ -46,9 +55,8 @@ def handle_thermal_controller_hk_data(
             "TMP1075 PL PCDU 1": tm_data[19],
             "TMP1075 IF BOARD": tm_data[20],
         }
-        printer.file_logger.info(str(parsed_data))
-        pp = pprint.PrettyPrinter(depth=4)
-        pp.pprint(parsed_data)
+        for idx, (k, v) in enumerate(parsed_data.items()):
+            print(f"{str(k).ljust(30)}: Valid: {valid_list[idx]}, Value: {v}")
     elif set_id == CtrlSetId.DEVICE_SENSORS:
         pw = PrintWrapper(printer)
         pw.dlog("Received device temperature data")
@@ -108,3 +116,13 @@ def handle_thermal_controller_hk_data(
         printer.file_logger.info(str(parsed_data))
         pp = pprint.PrettyPrinter(depth=4)
         pp.pprint(parsed_data)
+    elif set_id == CtrlSetId.HEATER_INFO:
+        print("Heater Switch States")
+        for i in range(8):
+            print(
+                f"{HEATER_LOCATION[i].ljust(25)}: {'On' if hk_data[i] == 1 else 'Off'}"
+            )
+        current_draw = struct.unpack("!H", hk_data[8:10])[0]
+        print(f"Heater Power Channel Current Draw: {current_draw} mA")
+    else:
+        _LOGGER.warning(f"Unimplemented set ID {set_id}")