eive_tmtc/config/definitions.py

@@ -76,3 +76,5 @@ class CustomServiceList(str, enum.Enum):
     SCEX = "scex"
     TM_STORE = "tm_store"
     SYSTEM = "system"
+    PWR_CTRL = "pwr_ctrl"
+    EPS_SS = "eps_subsystem"

eive_tmtc/config/events.csv

@@ -86,7 +86,6 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 10802;0x2a32;SERIALIZATION_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10803;0x2a33;FILESTORE_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10804;0x2a34;FILENAME_TOO_LARGE_ERROR;LOW;P1: Transaction step ID, P2: 0 for source file name, 1 for dest file name;fsfw/src/fsfw/cfdp/handler/defs.h
-10805;0x2a35;HANDLING_CFDP_REQUEST_FAILED;LOW;CFDP request handling failed. P2: Returncode.;fsfw/src/fsfw/cfdp/handler/defs.h
 11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;The limits for the rotation in safe mode were violated.;mission/acs/defs.h
 11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;The system has recovered from a safe rate rotation violation.;mission/acs/defs.h
 11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;Multiple RWs are invalid, uncommandable and therefore higher ACS modes cannot be maintained.;mission/acs/defs.h
@@ -100,6 +99,11 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/power/defs.h
 11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/power/defs.h
 11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/power/defs.h
+11304;0x2c28;DATASET_READ_FAILED;INFO;The dataset read for the inputs of the Power Controller has failed.;mission/power/defs.h
+11305;0x2c29;VOLTAGE_OUT_OF_BOUNDS;HIGH;No description;mission/power/defs.h
+11306;0x2c2a;TIMEDELTA_OUT_OF_BOUNDS;LOW;Time difference for Coulomb Counter was too large. P1: time in s * 10;mission/power/defs.h
+11307;0x2c2b;POWER_LEVEL_LOW;HIGH;The State of Charge is below the limit for payload use. Setting Payload to faulty.;mission/power/defs.h
+11308;0x2c2c;POWER_LEVEL_CRITICAL;HIGH;The State of Charge is below the limit for higher modes. Setting Reaction Wheels to faulty.;mission/power/defs.h
 11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
 11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
 11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/tcs/HeaterHandler.h
@@ -123,6 +127,8 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/payload/PlocMpsocHandler.h
 11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHandler.h
 11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/payload/PlocMpsocHandler.h
+11607;0x2d57;SUPV_NOT_ON;LOW;SUPV not on for boot or shutdown process. P1: 0 for OFF transition, 1 for ON transition.;linux/payload/PlocMpsocHandler.h
+11608;0x2d58;SUPV_REPLY_TIMEOUT;LOW;No description;linux/payload/PlocMpsocHandler.h
 11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
 11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
 11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h

eive_tmtc/config/object_ids.py

@@ -136,6 +136,7 @@ ACS_SUBSYSTEM_ID = bytes([0x73, 0x01, 0x00, 0x01])
 PL_SUBSYSTEM_ID = bytes([0x73, 0x01, 0x00, 0x02])
 TCS_SUBSYSTEM_ID = bytes([0x73, 0x01, 0x00, 0x03])
 COM_SUBSYSTEM_ID = bytes([0x73, 0x01, 0x00, 0x04])
+EPS_SUBSYSTEM_ID = bytes([0x73, 0x01, 0x00, 0x05])
 
 # Legacy names, kept for backwards compatibility
 ACS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x01])
@@ -157,6 +158,7 @@ STR_ASSEMBLY = bytes([0x73, 0x00, 0x00, 0x09])
 TCS_CONTROLLER = bytes([0x43, 0x40, 0x00, 0x01])
 ACS_CONTROLLER = bytes([0x43, 0x00, 0x00, 0x02])
 CORE_CONTROLLER_ID = bytes([0x43, 0x00, 0x00, 0x03])
+PWR_CONTROLLER = bytes([0x43, 0x00, 0x00, 0x04])
 
 MISC_TM_STORE = bytes([0x73, 0x02, 0x00, 0x01])
 OK_TM_STORE = bytes([0x73, 0x02, 0x00, 0x02])

eive_tmtc/config/objects.csv

@@ -1,6 +1,7 @@
 0x00005060;P60DOCK_TEST_TASK
 0x43000002;ACS_CONTROLLER
 0x43000003;CORE_CONTROLLER
+0x43000004;POWER_CONTROLLER
 0x43000006;GLOBAL_JSON_CFG
 0x43400001;THERMAL_CONTROLLER
 0x44120006;MGM_0_LIS3_HANDLER
@@ -161,6 +162,7 @@
 0x73010002;PL_SUBSYSTEM
 0x73010003;TCS_SUBSYSTEM
 0x73010004;COM_SUBSYSTEM
+0x73010005;EPS_SUBSYSTEM
 0x73020001;MISC_TM_STORE
 0x73020002;OK_TM_STORE
 0x73020003;NOT_OK_TM_STORE

eive_tmtc/config/returnvalues.csv

@@ -210,6 +210,7 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x27a8;DHI_NoReplyExpected;No description;168;DEVICE_HANDLER_IF;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
 0x27a9;DHI_NonOpTemperature;No description;169;DEVICE_HANDLER_IF;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
 0x27aa;DHI_CommandNotImplemented;No description;170;DEVICE_HANDLER_IF;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+0x27ab;DHI_NonOpStateOfCharge;No description;171;DEVICE_HANDLER_IF;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
 0x27b0;DHI_ChecksumError;No description;176;DEVICE_HANDLER_IF;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
 0x27b1;DHI_LengthMissmatch;No description;177;DEVICE_HANDLER_IF;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
 0x27b2;DHI_InvalidData;No description;178;DEVICE_HANDLER_IF;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
@@ -322,296 +323,289 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x3405;DC_NotActive;No description;5;DEVICE_COMMUNICATION_IF;fsfw/src/fsfw/devicehandlers/DeviceCommunicationIF.h
 0x3406;DC_TooMuchData;No description;6;DEVICE_COMMUNICATION_IF;fsfw/src/fsfw/devicehandlers/DeviceCommunicationIF.h
 0x3407;DC_Busy;No description;7;DEVICE_COMMUNICATION_IF;fsfw/src/fsfw/devicehandlers/DeviceCommunicationIF.h
-0x3601;CFDP_InvalidTlvType;No description;1;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3602;CFDP_InvalidDirectiveField;No description;2;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3603;CFDP_InvalidPduDatafieldLen;No description;3;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3604;CFDP_InvalidAckDirectiveFields;No description;4;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3605;CFDP_MetadataCantParseOptions;No description;5;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3606;CFDP_NakCantParseOptions;No description;6;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3607;CFDP_FinishedCantParseFsResponses;No description;7;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3608;CFDP_FilestoreRequiresSecondFile;No description;8;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3609;CFDP_FilestoreResponseCantParseFsMessage;No description;9;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x360a;CFDP_InvalidPduFormat;No description;10;CFDP_BASE;fsfw/src/fsfw/cfdp/definitions.h
-0x3700;CFDP_SourceTransactionPending;No description;0;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3701;CFDP_FileDoesNotExist;No description;1;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3702;CFDP_FileSegmentLenInvalid;No description;2;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3703;CFDP_SourceNameEmpty;No description;3;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3704;CFDP_DestNameEmpty;No description;4;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3705;CFDP_WrongRemoteCfgEntityId;No description;5;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3706;CFDP_TargetMsgQueueFull;No description;6;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3707;CFDP_TmStoreFull;No description;7;CFDP_HANDLER;fsfw/src/fsfw/cfdp/handler/defs.h
-0x3801;TSI_BadTimestamp;No description;1;TIME_STAMPER_IF;fsfw/src/fsfw/timemanager/TimeStampIF.h
-0x39a1;SGP4_InvalidEccentricity;No description;161;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x39a2;SGP4_InvalidMeanMotion;No description;162;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x39a3;SGP4_InvalidPerturbationElements;No description;163;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x39a4;SGP4_InvalidSemiLatusRectum;No description;164;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x39a5;SGP4_InvalidEpochElements;No description;165;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x39a6;SGP4_SatelliteHasDecayed;No description;166;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x39b1;SGP4_TleTooOld;No description;177;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x39b2;SGP4_TleNotInitialized;No description;178;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
-0x3a01;MUX_NotEnoughResources;No description;1;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a02;MUX_InsufficientMemory;No description;2;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a03;MUX_NoPrivilege;No description;3;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a04;MUX_WrongAttributeSetting;No description;4;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a05;MUX_MutexAlreadyLocked;No description;5;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a06;MUX_MutexNotFound;No description;6;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a07;MUX_MutexMaxLocks;No description;7;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a08;MUX_CurrThreadAlreadyOwnsMutex;No description;8;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a09;MUX_CurrThreadDoesNotOwnMutex;No description;9;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a0a;MUX_MutexTimeout;No description;10;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a0b;MUX_MutexInvalidId;No description;11;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3a0c;MUX_MutexDestroyedWhileWaiting;No description;12;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
-0x3b01;MQI_Empty;No description;1;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
-0x3b02;MQI_Full;No space left for more messages;2;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
-0x3b03;MQI_NoReplyPartner;Returned if a reply method was called without partner;3;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
-0x3b04;MQI_DestinationInvalid;Returned if the target destination is invalid.;4;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
-0x3c01;SPH_SemaphoreTimeout;No description;1;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
-0x3c02;SPH_SemaphoreNotOwned;No description;2;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
-0x3c03;SPH_SemaphoreInvalid;No description;3;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
-0x3d00;LPIF_PoolEntryNotFound;No description;0;LOCAL_POOL_OWNER_IF;fsfw/src/fsfw/datapoollocal/localPoolDefinitions.h
-0x3d01;LPIF_PoolEntryTypeConflict;No description;1;LOCAL_POOL_OWNER_IF;fsfw/src/fsfw/datapoollocal/localPoolDefinitions.h
-0x3ea0;PVA_InvalidReadWriteMode;No description;160;POOL_VARIABLE_IF;fsfw/src/fsfw/datapool/PoolVariableIF.h
-0x3ea1;PVA_InvalidPoolEntry;No description;161;POOL_VARIABLE_IF;fsfw/src/fsfw/datapool/PoolVariableIF.h
-0x3f00;HKM_QueueOrDestinationInvalid;No description;0;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
-0x3f01;HKM_WrongHkPacketType;No description;1;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
-0x3f02;HKM_ReportingStatusUnchanged;No description;2;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
-0x3f03;HKM_PeriodicHelperInvalid;No description;3;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
-0x3f04;HKM_PoolobjectNotFound;No description;4;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
-0x3f05;HKM_DatasetNotFound;No description;5;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
-0x4001;DLEE_StreamTooShort;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
-0x4002;DLEE_DecodingError;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
-0x4301;PUS11_InvalidTypeTimeWindow;No description;1;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
-0x4302;PUS11_InvalidTimeWindow;No description;2;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
-0x4303;PUS11_TimeshiftingNotPossible;No description;3;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
-0x4304;PUS11_InvalidRelativeTime;No description;4;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
-0x4305;PUS11_ContainedTcTooSmall;No description;5;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
-0x4306;PUS11_ContainedTcCrcMissmatch;No description;6;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
-0x4400;FILS_GenericFileError;No description;0;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4401;FILS_GenericDirError;No description;1;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4402;FILS_FilesystemInactive;No description;2;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4403;FILS_GenericRenameError;No description;3;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4404;FILS_IsBusy;No description;4;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4405;FILS_InvalidParameters;No description;5;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x440a;FILS_FileDoesNotExist;No description;10;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x440b;FILS_FileAlreadyExists;No description;11;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x440c;FILS_NotAFile;No description;12;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x440d;FILS_FileLocked;No description;13;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x440e;FILS_PermissionDenied;No description;14;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4415;FILS_DirectoryDoesNotExist;No description;21;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4416;FILS_DirectoryAlreadyExists;No description;22;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4417;FILS_NotADirectory;No description;23;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4418;FILS_DirectoryNotEmpty;No description;24;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x441e;FILS_SequencePacketMissingWrite;No description;30;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x441f;FILS_SequencePacketMissingRead;No description;31;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
-0x4500;UXOS_ExecutionFinished;Execution of the current command has finished;0;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
-0x4501;UXOS_CommandPending;Command is pending. This will also be returned if the user tries to load another command but a command is still pending;1;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
-0x4502;UXOS_BytesRead;Some bytes have been read from the executing process;2;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
-0x4503;UXOS_CommandError;Command execution failed;3;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
-0x4504;UXOS_NoCommandLoadedOrPending;;4;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
-0x4506;UXOS_PcloseCallError;No description;6;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
-0x4600;HSPI_OpeningFileFailed;No description;0;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
-0x4601;HSPI_FullDuplexTransferFailed;No description;1;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
-0x4602;HSPI_HalfDuplexTransferFailed;No description;2;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
-0x4603;HSPI_Timeout;No description;3;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
-0x4604;HSPI_Busy;No description;4;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
-0x4605;HSPI_GenericError;No description;5;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
-0x4701;HURT_UartReadFailure;No description;1;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
-0x4702;HURT_UartReadSizeMissmatch;No description;2;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
-0x4703;HURT_UartRxBufferTooSmall;No description;3;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
-0x4901;HGIO_UnknownGpioId;No description;1;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
-0x4902;HGIO_DriveGpioFailure;No description;2;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
-0x4903;HGIO_GpioTypeFailure;No description;3;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
-0x4904;HGIO_GpioInvalidInstance;No description;4;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
-0x4905;HGIO_GpioDuplicateDetected;No description;5;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
-0x4906;HGIO_GpioInitFailed;No description;6;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
-0x4907;HGIO_GpioGetValueFailed;No description;7;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
-0x4d00;SPPA_NoPacketFound;No description;0;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
-0x4d01;SPPA_SplitPacket;No description;1;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
-0x50a1;HEATER_CommandNotSupported;No description;161;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x50a2;HEATER_InitFailed;No description;162;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x50a3;HEATER_InvalidSwitchNr;No description;163;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x50a4;HEATER_MainSwitchSetTimeout;No description;164;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x50a5;HEATER_CommandAlreadyWaiting;No description;165;HEATER_HANDLER;mission/tcs/HeaterHandler.h
-0x51a0;SYRLINKS_CrcFailure;No description;160;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a1;SYRLINKS_UartFraminOrParityErrorAck;No description;161;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a2;SYRLINKS_BadCharacterAck;No description;162;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a3;SYRLINKS_BadParameterValueAck;No description;163;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a4;SYRLINKS_BadEndOfFrameAck;No description;164;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a5;SYRLINKS_UnknownCommandIdAck;No description;165;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a6;SYRLINKS_BadCrcAck;No description;166;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a7;SYRLINKS_ReplyWrongSize;No description;167;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x51a8;SYRLINKS_MissingStartFrameCharacter;No description;168;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
-0x5200;IMTQ_InvalidCommandCode;No description;0;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5201;IMTQ_MgmMeasurementLowLevelError;No description;1;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5202;IMTQ_ActuateCmdLowLevelError;No description;2;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5203;IMTQ_ParameterMissing;No description;3;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5204;IMTQ_ParameterInvalid;No description;4;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5205;IMTQ_CcUnavailable;No description;5;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5206;IMTQ_InternalProcessingError;No description;6;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5207;IMTQ_RejectedWithoutReason;No description;7;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5208;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x5209;IMTQ_StartupCfgError;No description;9;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x520a;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;10;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x53b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/acs/rwHelpers.h
-0x53b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/acs/rwHelpers.h
-0x53b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/acs/rwHelpers.h
-0x53b3;RWHA_InvalidSubstitute;Can be used by the HDLC decoding mechanism to inform about an invalid substitution combination;179;RW_HANDLER;mission/acs/rwHelpers.h
-0x53b4;RWHA_MissingEndSign;HDLC decoding mechanism never receives the end sign 0x7E;180;RW_HANDLER;mission/acs/rwHelpers.h
-0x53b5;RWHA_NoReply;Reaction wheel only responds with empty frames.;181;RW_HANDLER;mission/acs/rwHelpers.h
-0x53b6;RWHA_NoStartMarker;Expected a start marker as first byte;182;RW_HANDLER;mission/acs/rwHelpers.h
-0x53b7;RWHA_SpiReadTimeout;Timeout when reading reply;183;RW_HANDLER;mission/acs/rwHelpers.h
-0x54a0;STRH_TemperatureReqFailed;Status in temperature reply signals error;160;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a1;STRH_PingFailed;Ping command failed;161;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a2;STRH_VersionReqFailed;Status in version reply signals error;162;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a3;STRH_InterfaceReqFailed;Status in interface reply signals error;163;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a4;STRH_PowerReqFailed;Status in power reply signals error;164;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a5;STRH_SetParamFailed;Status of reply to parameter set command signals error;165;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a6;STRH_ActionFailed;Status of reply to action command signals error;166;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a7;STRH_FilePathTooLong;Received invalid path string. Exceeds allowed length;167;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a8;STRH_FilenameTooLong;Name of file received with command is too long;168;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54a9;STRH_InvalidProgram;Received version reply with invalid program ID;169;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54aa;STRH_ReplyError;Status field reply signals error;170;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54ab;STRH_CommandTooShort;Received command which is too short (some data is missing for proper execution);171;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54ac;STRH_InvalidLength;Received command with invalid length (too few or too many parameters);172;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54ad;STRH_RegionMismatch;Region mismatch between send and received data;173;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54ae;STRH_AddressMismatch;Address mismatch between send and received data;174;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54af;STRH_LengthMismatch;Length field mismatch between send and received data;175;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b0;STRH_FileNotExists;Specified file does not exist;176;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b1;STRH_InvalidType;Download blob pixel command has invalid type field;177;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b2;STRH_InvalidId;Received FPGA action command with invalid ID;178;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b3;STRH_ReplyTooShort;Received reply is too short;179;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b4;STRH_CrcFailure;Received reply with invalid CRC;180;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b5;STRH_StrHelperExecuting;Star tracker handler currently executing a command and using the communication interface;181;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;182;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b7;STRH_StartrackerNotRunningFirmware;Star tracker must be in firmware mode to run this command;183;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54b8;STRH_StartrackerNotRunningBootloader;Star tracker must be in bootloader mode to run this command;184;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x55e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);224;DWLPWRON_CMD;linux/payload/plocMpsocHelpers.h
-0x55e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);225;DWLPWRON_CMD;linux/payload/plocMpsocHelpers.h
-0x5800;PLSPVhLP_RequestDone;No description;0;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5801;PLSPVhLP_NoPacketFound;No description;1;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5802;PLSPVhLP_DecodeBufTooSmall;No description;2;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5803;PLSPVhLP_PossiblePacketLossConsecutiveStart;No description;3;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5804;PLSPVhLP_PossiblePacketLossConsecutiveEnd;No description;4;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x5805;PLSPVhLP_HdlcError;No description;5;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x58a0;PLSPVhLP_FileClosedAccidentally;File accidentally close;160;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x58a1;PLSPVhLP_ProcessTerminated;Process has been terminated by command;161;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x58a2;PLSPVhLP_PathNotExists;Received command with invalid pathname;162;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x58a3;PLSPVhLP_EventBufferReplyInvalidApid;Expected event buffer TM but received space packet with other APID;163;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x59a0;SUSS_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a1;SUSS_InvalidRampTime;Action Message with invalid ramp time was received.;161;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a2;SUSS_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a3;SUSS_ExecutionFailed;Command execution failed;163;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a4;SUSS_CrcError;Reaction wheel reply has invalid crc;164;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a5;SUSS_ValueNotRead;No description;165;SUS_HANDLER;mission/acs/RwHandler.h
-0x5aa0;IPCI_PapbBusy;No description;160;CCSDS_IP_CORE_BRIDGE;linux/ipcore/PapbVcInterface.h
-0x5ba0;PTME_UnknownVcId;No description;160;PTME;linux/ipcore/Ptme.h
-0x5d01;STRHLP_SdNotMounted;SD card specified in path string not mounted;1;STR_HELPER;linux/acs/StrComHandler.h
-0x5d02;STRHLP_FileNotExists;Specified file does not exist on filesystem;2;STR_HELPER;linux/acs/StrComHandler.h
-0x5d03;STRHLP_PathNotExists;Specified path does not exist;3;STR_HELPER;linux/acs/StrComHandler.h
-0x5d04;STRHLP_FileCreationFailed;Failed to create download image or read flash file;4;STR_HELPER;linux/acs/StrComHandler.h
-0x5d05;STRHLP_RegionMismatch;Region in flash write/read reply does not match expected region;5;STR_HELPER;linux/acs/StrComHandler.h
-0x5d06;STRHLP_AddressMismatch;Address in flash write/read reply does not match expected address;6;STR_HELPER;linux/acs/StrComHandler.h
-0x5d07;STRHLP_LengthMismatch;Length in flash write/read reply does not match expected length;7;STR_HELPER;linux/acs/StrComHandler.h
-0x5d08;STRHLP_StatusError;Status field in reply signals error;8;STR_HELPER;linux/acs/StrComHandler.h
-0x5d09;STRHLP_InvalidTypeId;Reply has invalid type ID (should be of action reply type);9;STR_HELPER;linux/acs/StrComHandler.h
-0x5d0a;STRHLP_ReceptionTimeout;No description;10;STR_HELPER;linux/acs/StrComHandler.h
-0x5d0b;STRHLP_DecodingError;No description;11;STR_HELPER;linux/acs/StrComHandler.h
-0x5e00;GOMS_PacketTooLong;No description;0;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5e01;GOMS_InvalidTableId;No description;1;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5e02;GOMS_InvalidAddress;No description;2;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5e03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5e04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5e05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
-0x5fa0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;160;PLOC_MEMORY_DUMPER;linux/payload/PlocMemoryDumper.h
-0x5fa1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;161;PLOC_MEMORY_DUMPER;linux/payload/PlocMemoryDumper.h
-0x60a0;PDEC_AbandonedCltuRetval;No description;160;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a1;PDEC_FrameDirtyRetval;No description;161;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a2;PDEC_FrameIllegalMultipleReasons;No description;162;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a3;PDEC_AdDiscardedLockoutRetval;No description;163;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a4;PDEC_AdDiscardedWaitRetval;No description;164;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a5;PDEC_AdDiscardedNsVs;No description;165;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a6;PDEC_NoReportRetval;No description;166;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a7;PDEC_ErrorVersionNumberRetval;No description;167;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a8;PDEC_IllegalCombinationRetval;No description;168;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60a9;PDEC_InvalidScIdRetval;No description;169;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60aa;PDEC_InvalidVcIdMsbRetval;No description;170;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60ab;PDEC_InvalidVcIdLsbRetval;No description;171;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60ac;PDEC_NsNotZeroRetval;No description;172;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60ae;PDEC_InvalidBcCc;No description;174;PDEC_HANDLER;linux/ipcore/pdec.h
-0x60b0;PDEC_CommandNotImplemented;Received action message with unknown action id;176;PDEC_HANDLER;linux/ipcore/pdec.h
-0x61a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;160;CCSDS_HANDLER;mission/com/CcsdsIpCoreHandler.h
-0x62a0;RS_RateNotSupported;The commanded rate is not supported by the current FPGA design;160;RATE_SETTER;linux/ipcore/PtmeConfig.h
-0x62a1;RS_BadBitRate;Bad bitrate has been commanded (e.g. 0);161;RATE_SETTER;linux/ipcore/PtmeConfig.h
-0x62a2;RS_ClkInversionFailed;Failed to invert clock and thus change the time the data is updated with respect to the tx clock;162;RATE_SETTER;linux/ipcore/PtmeConfig.h
-0x62a3;RS_TxManipulatorConfigFailed;Failed to change configuration bit of tx clock manipulator;163;RATE_SETTER;linux/ipcore/PtmeConfig.h
-0x6301;JSONBASE_JsonFileNotExists;Specified json file does not exist;1;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
-0x6302;JSONBASE_SetNotExists;Requested set does not exist in json file;2;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
-0x6303;JSONBASE_ParamNotExists;Requested parameter does not exist in json file;3;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
-0x64a0;NVMB_KeyNotExists;Specified key does not exist in json file;160;NVM_PARAM_BASE;mission/memory/NvmParameterBase.h
-0x65a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;160;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
-0x65a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;161;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
-0x66a0;PLMPHLP_FileWriteError;File error occured for file transfers from OBC to the MPSoC.;160;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocSpecialComHelper.h
-0x66a1;PLMPHLP_FileReadError;File error occured for file transfers from MPSoC to OBC.;161;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocSpecialComHelper.h
-0x67a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x67a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x67a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x67a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x67a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
-0x68a0;MPSOCRTVIF_CrcFailure;Space Packet received from PLOC has invalid CRC;160;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a1;MPSOCRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC;161;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a2;MPSOCRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC;162;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a3;MPSOCRTVIF_InvalidApid;Received space packet with invalid APID from PLOC;163;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a4;MPSOCRTVIF_InvalidLength;Received command with invalid length;164;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a5;MPSOCRTVIF_FilenameTooLong;Filename of file in OBC filesystem is too long;165;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a6;MPSOCRTVIF_MpsocHelperExecuting;MPSoC helper is currently executing a command;166;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a7;MPSOCRTVIF_MpsocFilenameTooLong;Filename of MPSoC file is to long (max. 256 bytes);167;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a8;MPSOCRTVIF_InvalidParameter;Command has invalid parameter;168;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x68a9;MPSOCRTVIF_NameTooLong;Received command has file string with invalid length;169;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
-0x69a0;SPVRTVIF_CrcFailure;Space Packet received from PLOC supervisor has invalid CRC;160;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a1;SPVRTVIF_InvalidServiceId;No description;161;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a2;SPVRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC supervisor;162;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a3;SPVRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC supervisor;163;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a4;SPVRTVIF_InvalidApid;Received space packet with invalid APID from PLOC supervisor;164;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a5;SPVRTVIF_GetTimeFailure;Failed to read current system time;165;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a6;SPVRTVIF_InvalidWatchdog;Received command with invalid watchdog parameter. Valid watchdogs are 0 for PS, 1 for PL and 2 for INT;166;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a7;SPVRTVIF_InvalidWatchdogTimeout;Received watchdog timeout config command with invalid timeout. Valid timeouts must be in the range between 1000 and 360000 ms.;167;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a8;SPVRTVIF_InvalidLatchupId;Received latchup config command with invalid latchup ID;168;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69a9;SPVRTVIF_SweepPeriodTooSmall;Received set adc sweep period command with invalid sweep period. Must be larger than 21.;169;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69aa;SPVRTVIF_InvalidTestParam;Receive auto EM test command with invalid test param. Valid params are 1 and 2.;170;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69ab;SPVRTVIF_MramPacketParsingFailure;Returned when scanning for MRAM dump packets failed.;171;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69ac;SPVRTVIF_InvalidMramAddresses;Returned when the start and stop addresses of the MRAM dump or MRAM  wipe commands are invalid (e.g. start address bigger than stop address);172;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69ad;SPVRTVIF_NoMramPacket;Expect reception of an MRAM dump packet but received space packet with other apid.;173;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69ae;SPVRTVIF_PathDoesNotExist;Path to PLOC directory on SD card does not exist;174;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69af;SPVRTVIF_MramFileNotExists;MRAM dump file does not exists. The file should actually already have been created with the reception of the first dump packet.;175;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69b0;SPVRTVIF_InvalidReplyLength;No description;176;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69b1;SPVRTVIF_InvalidLength;Received action command has invalid length;177;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69b2;SPVRTVIF_FilenameTooLong;Filename too long;178;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69b3;SPVRTVIF_UpdateStatusReportInvalidLength;Received update status report with invalid packet length field;179;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69b4;SPVRTVIF_UpdateCrcFailure;Update status report does not contain expected CRC. There might be a bit flip in the update memory region.;180;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69b5;SPVRTVIF_SupvHelperExecuting;Supervisor helper task ist currently executing a command (wait until helper tas has finished or interrupt by sending the terminate command);181;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69c0;SPVRTVIF_BufTooSmall;No description;192;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x69c1;SPVRTVIF_NoReplyTimeout;No description;193;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x6a00;ACSCTRL_FileDeletionFailed;File deletion failed and at least one file is still existent.;0;ACS_CTRL;mission/controller/AcsController.h
-0x6b02;ACSMEKF_MekfUninitialized;No description;2;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b03;ACSMEKF_MekfNoGyrData;No description;3;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b04;ACSMEKF_MekfNoModelVectors;No description;4;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b05;ACSMEKF_MekfNoSusMgmStrData;No description;5;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b06;ACSMEKF_MekfCovarianceInversionFailed;No description;6;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b07;ACSMEKF_MekfNotFinite;No description;7;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b08;ACSMEKF_MekfInitialized;No description;8;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6b09;ACSMEKF_MekfRunning;No description;9;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
-0x6c00;SDMA_OpOngoing;No description;0;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c01;SDMA_AlreadyOn;No description;1;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c02;SDMA_AlreadyMounted;No description;2;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c03;SDMA_AlreadyOff;No description;3;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c0a;SDMA_StatusFileNexists;No description;10;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c0b;SDMA_StatusFileFormatInvalid;No description;11;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c0c;SDMA_MountError;No description;12;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c0d;SDMA_UnmountError;No description;13;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c0e;SDMA_SystemCallError;No description;14;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6c0f;SDMA_PopenCallError;No description;15;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
-0x6d00;LPH_SdNotReady;No description;0;LOCAL_PARAM_HANDLER;bsp_q7s/memory/LocalParameterHandler.h
-0x6e00;PTM_DumpDone;No description;0;PERSISTENT_TM_STORE;mission/tmtc/PersistentTmStore.h
-0x6e01;PTM_BusyDumping;No description;1;PERSISTENT_TM_STORE;mission/tmtc/PersistentTmStore.h
-0x6f00;TMS_IsBusy;No description;0;TM_SINK;mission/tmtc/DirectTmSinkIF.h
-0x7100;SCBU_KeyNotFound;No description;0;SCRATCH_BUFFER;bsp_q7s/memory/scratchApi.h
+0x3601;CFDP_InvalidTlvType;No description;1;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3602;CFDP_InvalidDirectiveField;No description;2;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3603;CFDP_InvalidPduDatafieldLen;No description;3;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3604;CFDP_InvalidAckDirectiveFields;No description;4;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3605;CFDP_MetadataCantParseOptions;No description;5;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3606;CFDP_NakCantParseOptions;No description;6;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3607;CFDP_FinishedCantParseFsResponses;No description;7;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3608;CFDP_FilestoreRequiresSecondFile;No description;8;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3609;CFDP_FilestoreResponseCantParseFsMessage;No description;9;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x360a;CFDP_InvalidPduFormat;No description;10;CFDP;fsfw/src/fsfw/cfdp/definitions.h
+0x3701;TSI_BadTimestamp;No description;1;TIME_STAMPER_IF;fsfw/src/fsfw/timemanager/TimeStampIF.h
+0x38a1;SGP4_InvalidEccentricity;No description;161;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x38a2;SGP4_InvalidMeanMotion;No description;162;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x38a3;SGP4_InvalidPerturbationElements;No description;163;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x38a4;SGP4_InvalidSemiLatusRectum;No description;164;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x38a5;SGP4_InvalidEpochElements;No description;165;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x38a6;SGP4_SatelliteHasDecayed;No description;166;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x38b1;SGP4_TleTooOld;No description;177;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x38b2;SGP4_TleNotInitialized;No description;178;SGP4PROPAGATOR_CLASS;fsfw/src/fsfw/coordinates/Sgp4Propagator.h
+0x3901;MUX_NotEnoughResources;No description;1;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3902;MUX_InsufficientMemory;No description;2;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3903;MUX_NoPrivilege;No description;3;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3904;MUX_WrongAttributeSetting;No description;4;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3905;MUX_MutexAlreadyLocked;No description;5;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3906;MUX_MutexNotFound;No description;6;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3907;MUX_MutexMaxLocks;No description;7;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3908;MUX_CurrThreadAlreadyOwnsMutex;No description;8;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3909;MUX_CurrThreadDoesNotOwnMutex;No description;9;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x390a;MUX_MutexTimeout;No description;10;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x390b;MUX_MutexInvalidId;No description;11;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x390c;MUX_MutexDestroyedWhileWaiting;No description;12;MUTEX_IF;fsfw/src/fsfw/ipc/MutexIF.h
+0x3a01;MQI_Empty;No description;1;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
+0x3a02;MQI_Full;No space left for more messages;2;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
+0x3a03;MQI_NoReplyPartner;Returned if a reply method was called without partner;3;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
+0x3a04;MQI_DestinationInvalid;Returned if the target destination is invalid.;4;MESSAGE_QUEUE_IF;fsfw/src/fsfw/ipc/MessageQueueIF.h
+0x3b00;SPH_ConnBroken;No description;0;SEMAPHORE_IF;fsfw/src/fsfw/osal/common/TcpTmTcServer.h
+0x3b01;SPH_SemaphoreTimeout;No description;1;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
+0x3b02;SPH_SemaphoreNotOwned;No description;2;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
+0x3b03;SPH_SemaphoreInvalid;No description;3;SEMAPHORE_IF;fsfw/src/fsfw/tasks/SemaphoreIF.h
+0x3c00;LPIF_PoolEntryNotFound;No description;0;LOCAL_POOL_OWNER_IF;fsfw/src/fsfw/datapoollocal/localPoolDefinitions.h
+0x3c01;LPIF_PoolEntryTypeConflict;No description;1;LOCAL_POOL_OWNER_IF;fsfw/src/fsfw/datapoollocal/localPoolDefinitions.h
+0x3da0;PVA_InvalidReadWriteMode;No description;160;POOL_VARIABLE_IF;fsfw/src/fsfw/datapool/PoolVariableIF.h
+0x3da1;PVA_InvalidPoolEntry;No description;161;POOL_VARIABLE_IF;fsfw/src/fsfw/datapool/PoolVariableIF.h
+0x3e00;HKM_QueueOrDestinationInvalid;No description;0;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
+0x3e01;HKM_WrongHkPacketType;No description;1;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
+0x3e02;HKM_ReportingStatusUnchanged;No description;2;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
+0x3e03;HKM_PeriodicHelperInvalid;No description;3;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
+0x3e04;HKM_PoolobjectNotFound;No description;4;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
+0x3e05;HKM_DatasetNotFound;No description;5;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
+0x3f01;DLEE_StreamTooShort;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
+0x3f02;DLEE_DecodingError;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
+0x4201;PUS11_InvalidTypeTimeWindow;No description;1;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4202;PUS11_InvalidTimeWindow;No description;2;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4203;PUS11_TimeshiftingNotPossible;No description;3;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4204;PUS11_InvalidRelativeTime;No description;4;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4205;PUS11_ContainedTcTooSmall;No description;5;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4206;PUS11_ContainedTcCrcMissmatch;No description;6;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4300;FILS_GenericFileError;No description;0;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4301;FILS_GenericDirError;No description;1;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4302;FILS_FilesystemInactive;No description;2;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4303;FILS_GenericRenameError;No description;3;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4304;FILS_IsBusy;No description;4;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4305;FILS_InvalidParameters;No description;5;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x430a;FILS_FileDoesNotExist;No description;10;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x430b;FILS_FileAlreadyExists;No description;11;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x430c;FILS_NotAFile;No description;12;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x430d;FILS_FileLocked;No description;13;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x430e;FILS_PermissionDenied;No description;14;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4315;FILS_DirectoryDoesNotExist;No description;21;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4316;FILS_DirectoryAlreadyExists;No description;22;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4317;FILS_NotADirectory;No description;23;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4318;FILS_DirectoryNotEmpty;No description;24;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x431e;FILS_SequencePacketMissingWrite;No description;30;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x431f;FILS_SequencePacketMissingRead;No description;31;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
+0x4400;UXOS_ExecutionFinished;Execution of the current command has finished;0;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
+0x4401;UXOS_CommandPending;Command is pending. This will also be returned if the user tries to load another command but a command is still pending;1;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
+0x4402;UXOS_BytesRead;Some bytes have been read from the executing process;2;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
+0x4403;UXOS_CommandError;Command execution failed;3;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
+0x4404;UXOS_NoCommandLoadedOrPending;;4;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
+0x4406;UXOS_PcloseCallError;No description;6;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
+0x4500;HSPI_OpeningFileFailed;No description;0;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4501;HSPI_FullDuplexTransferFailed;No description;1;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4502;HSPI_HalfDuplexTransferFailed;No description;2;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4503;HSPI_Timeout;No description;3;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4504;HSPI_Busy;No description;4;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4505;HSPI_GenericError;No description;5;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4601;HURT_UartReadFailure;No description;1;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
+0x4602;HURT_UartReadSizeMissmatch;No description;2;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
+0x4603;HURT_UartRxBufferTooSmall;No description;3;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
+0x4801;HGIO_UnknownGpioId;No description;1;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
+0x4802;HGIO_DriveGpioFailure;No description;2;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
+0x4803;HGIO_GpioTypeFailure;No description;3;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
+0x4804;HGIO_GpioInvalidInstance;No description;4;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
+0x4805;HGIO_GpioDuplicateDetected;No description;5;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
+0x4806;HGIO_GpioInitFailed;No description;6;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
+0x4807;HGIO_GpioGetValueFailed;No description;7;HAL_GPIO;fsfw/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h
+0x4c00;SPPA_NoPacketFound;No description;0;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
+0x4c01;SPPA_SplitPacket;No description;1;SPACE_PACKET_PARSER;fsfw/src/fsfw/tmtcservices/SpacePacketParser.h
+0x4fa1;HEATER_CommandNotSupported;No description;161;HEATER_HANDLER;mission/tcs/HeaterHandler.h
+0x4fa2;HEATER_InitFailed;No description;162;HEATER_HANDLER;mission/tcs/HeaterHandler.h
+0x4fa3;HEATER_InvalidSwitchNr;No description;163;HEATER_HANDLER;mission/tcs/HeaterHandler.h
+0x4fa4;HEATER_MainSwitchSetTimeout;No description;164;HEATER_HANDLER;mission/tcs/HeaterHandler.h
+0x4fa5;HEATER_CommandAlreadyWaiting;No description;165;HEATER_HANDLER;mission/tcs/HeaterHandler.h
+0x50a0;SYRLINKS_CrcFailure;No description;160;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a1;SYRLINKS_UartFraminOrParityErrorAck;No description;161;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a2;SYRLINKS_BadCharacterAck;No description;162;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a3;SYRLINKS_BadParameterValueAck;No description;163;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a4;SYRLINKS_BadEndOfFrameAck;No description;164;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a5;SYRLINKS_UnknownCommandIdAck;No description;165;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a6;SYRLINKS_BadCrcAck;No description;166;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a7;SYRLINKS_ReplyWrongSize;No description;167;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x50a8;SYRLINKS_MissingStartFrameCharacter;No description;168;SYRLINKS_HANDLER;mission/com/SyrlinksHandler.h
+0x5100;IMTQ_InvalidCommandCode;No description;0;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5101;IMTQ_MgmMeasurementLowLevelError;No description;1;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5102;IMTQ_ActuateCmdLowLevelError;No description;2;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5103;IMTQ_ParameterMissing;No description;3;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5104;IMTQ_ParameterInvalid;No description;4;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5105;IMTQ_CcUnavailable;No description;5;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5106;IMTQ_InternalProcessingError;No description;6;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5107;IMTQ_RejectedWithoutReason;No description;7;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5108;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5109;IMTQ_StartupCfgError;No description;9;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x510a;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;10;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x52b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/acs/rwHelpers.h
+0x52b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/acs/rwHelpers.h
+0x52b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/acs/rwHelpers.h
+0x52b3;RWHA_InvalidSubstitute;Can be used by the HDLC decoding mechanism to inform about an invalid substitution combination;179;RW_HANDLER;mission/acs/rwHelpers.h
+0x52b4;RWHA_MissingEndSign;HDLC decoding mechanism never receives the end sign 0x7E;180;RW_HANDLER;mission/acs/rwHelpers.h
+0x52b5;RWHA_NoReply;Reaction wheel only responds with empty frames.;181;RW_HANDLER;mission/acs/rwHelpers.h
+0x52b6;RWHA_NoStartMarker;Expected a start marker as first byte;182;RW_HANDLER;mission/acs/rwHelpers.h
+0x52b7;RWHA_SpiReadTimeout;Timeout when reading reply;183;RW_HANDLER;mission/acs/rwHelpers.h
+0x53a0;STRH_TemperatureReqFailed;Status in temperature reply signals error;160;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a1;STRH_PingFailed;Ping command failed;161;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a2;STRH_VersionReqFailed;Status in version reply signals error;162;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a3;STRH_InterfaceReqFailed;Status in interface reply signals error;163;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a4;STRH_PowerReqFailed;Status in power reply signals error;164;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a5;STRH_SetParamFailed;Status of reply to parameter set command signals error;165;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a6;STRH_ActionFailed;Status of reply to action command signals error;166;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a7;STRH_FilePathTooLong;Received invalid path string. Exceeds allowed length;167;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a8;STRH_FilenameTooLong;Name of file received with command is too long;168;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53a9;STRH_InvalidProgram;Received version reply with invalid program ID;169;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53aa;STRH_ReplyError;Status field reply signals error;170;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ab;STRH_CommandTooShort;Received command which is too short (some data is missing for proper execution);171;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ac;STRH_InvalidLength;Received command with invalid length (too few or too many parameters);172;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ad;STRH_RegionMismatch;Region mismatch between send and received data;173;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53ae;STRH_AddressMismatch;Address mismatch between send and received data;174;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53af;STRH_LengthMismatch;Length field mismatch between send and received data;175;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b0;STRH_FileNotExists;Specified file does not exist;176;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b1;STRH_InvalidType;Download blob pixel command has invalid type field;177;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b2;STRH_InvalidId;Received FPGA action command with invalid ID;178;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b3;STRH_ReplyTooShort;Received reply is too short;179;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b4;STRH_CrcFailure;Received reply with invalid CRC;180;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b5;STRH_StrHelperExecuting;Star tracker handler currently executing a command and using the communication interface;181;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;182;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b7;STRH_StartrackerNotRunningFirmware;Star tracker must be in firmware mode to run this command;183;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x53b8;STRH_StartrackerNotRunningBootloader;Star tracker must be in bootloader mode to run this command;184;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
+0x54e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);224;DWLPWRON_CMD;linux/payload/plocMpsocHelpers.h
+0x54e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);225;DWLPWRON_CMD;linux/payload/plocMpsocHelpers.h
+0x5700;PLSPVhLP_RequestDone;No description;0;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x5701;PLSPVhLP_NoPacketFound;No description;1;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x5702;PLSPVhLP_DecodeBufTooSmall;No description;2;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x5703;PLSPVhLP_PossiblePacketLossConsecutiveStart;No description;3;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x5704;PLSPVhLP_PossiblePacketLossConsecutiveEnd;No description;4;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x5705;PLSPVhLP_HdlcError;No description;5;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x57a0;PLSPVhLP_FileClosedAccidentally;File accidentally close;160;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x57a1;PLSPVhLP_ProcessTerminated;Process has been terminated by command;161;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x57a2;PLSPVhLP_PathNotExists;Received command with invalid pathname;162;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x57a3;PLSPVhLP_EventBufferReplyInvalidApid;Expected event buffer TM but received space packet with other APID;163;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
+0x58a0;SUSS_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a1;SUSS_InvalidRampTime;Action Message with invalid ramp time was received.;161;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a2;SUSS_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a3;SUSS_ExecutionFailed;Command execution failed;163;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a4;SUSS_CrcError;Reaction wheel reply has invalid crc;164;SUS_HANDLER;mission/acs/RwHandler.h
+0x58a5;SUSS_ValueNotRead;No description;165;SUS_HANDLER;mission/acs/RwHandler.h
+0x59a0;IPCI_PapbBusy;No description;160;CCSDS_IP_CORE_BRIDGE;linux/ipcore/PapbVcInterface.h
+0x5aa0;PTME_UnknownVcId;No description;160;PTME;linux/ipcore/Ptme.h
+0x5c01;STRHLP_SdNotMounted;SD card specified in path string not mounted;1;STR_HELPER;linux/acs/StrComHandler.h
+0x5c02;STRHLP_FileNotExists;Specified file does not exist on filesystem;2;STR_HELPER;linux/acs/StrComHandler.h
+0x5c03;STRHLP_PathNotExists;Specified path does not exist;3;STR_HELPER;linux/acs/StrComHandler.h
+0x5c04;STRHLP_FileCreationFailed;Failed to create download image or read flash file;4;STR_HELPER;linux/acs/StrComHandler.h
+0x5c05;STRHLP_RegionMismatch;Region in flash write/read reply does not match expected region;5;STR_HELPER;linux/acs/StrComHandler.h
+0x5c06;STRHLP_AddressMismatch;Address in flash write/read reply does not match expected address;6;STR_HELPER;linux/acs/StrComHandler.h
+0x5c07;STRHLP_LengthMismatch;Length in flash write/read reply does not match expected length;7;STR_HELPER;linux/acs/StrComHandler.h
+0x5c08;STRHLP_StatusError;Status field in reply signals error;8;STR_HELPER;linux/acs/StrComHandler.h
+0x5c09;STRHLP_InvalidTypeId;Reply has invalid type ID (should be of action reply type);9;STR_HELPER;linux/acs/StrComHandler.h
+0x5c0a;STRHLP_ReceptionTimeout;No description;10;STR_HELPER;linux/acs/StrComHandler.h
+0x5c0b;STRHLP_DecodingError;No description;11;STR_HELPER;linux/acs/StrComHandler.h
+0x5d00;GOMS_PacketTooLong;No description;0;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d01;GOMS_InvalidTableId;No description;1;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d02;GOMS_InvalidAddress;No description;2;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d03;GOMS_InvalidParamSize;No description;3;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d04;GOMS_InvalidPayloadSize;No description;4;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5d05;GOMS_UnknownReplyId;No description;5;GOM_SPACE_HANDLER;mission/power/GomspaceDeviceHandler.h
+0x5ea0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;160;PLOC_MEMORY_DUMPER;linux/payload/PlocMemoryDumper.h
+0x5ea1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;161;PLOC_MEMORY_DUMPER;linux/payload/PlocMemoryDumper.h
+0x5fa0;PDEC_AbandonedCltuRetval;No description;160;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa1;PDEC_FrameDirtyRetval;No description;161;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa2;PDEC_FrameIllegalMultipleReasons;No description;162;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa3;PDEC_AdDiscardedLockoutRetval;No description;163;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa4;PDEC_AdDiscardedWaitRetval;No description;164;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa5;PDEC_AdDiscardedNsVs;No description;165;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa6;PDEC_NoReportRetval;No description;166;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa7;PDEC_ErrorVersionNumberRetval;No description;167;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa8;PDEC_IllegalCombinationRetval;No description;168;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fa9;PDEC_InvalidScIdRetval;No description;169;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5faa;PDEC_InvalidVcIdMsbRetval;No description;170;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fab;PDEC_InvalidVcIdLsbRetval;No description;171;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fac;PDEC_NsNotZeroRetval;No description;172;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fae;PDEC_InvalidBcCc;No description;174;PDEC_HANDLER;linux/ipcore/pdec.h
+0x5fb0;PDEC_CommandNotImplemented;Received action message with unknown action id;176;PDEC_HANDLER;linux/ipcore/pdec.h
+0x60a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;160;CCSDS_HANDLER;mission/com/CcsdsIpCoreHandler.h
+0x61a0;RS_RateNotSupported;The commanded rate is not supported by the current FPGA design;160;RATE_SETTER;linux/ipcore/PtmeConfig.h
+0x61a1;RS_BadBitRate;Bad bitrate has been commanded (e.g. 0);161;RATE_SETTER;linux/ipcore/PtmeConfig.h
+0x61a2;RS_ClkInversionFailed;Failed to invert clock and thus change the time the data is updated with respect to the tx clock;162;RATE_SETTER;linux/ipcore/PtmeConfig.h
+0x61a3;RS_TxManipulatorConfigFailed;Failed to change configuration bit of tx clock manipulator;163;RATE_SETTER;linux/ipcore/PtmeConfig.h
+0x6201;JSONBASE_JsonFileNotExists;Specified json file does not exist;1;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
+0x6202;JSONBASE_SetNotExists;Requested set does not exist in json file;2;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
+0x6203;JSONBASE_ParamNotExists;Requested parameter does not exist in json file;3;ARCSEC_JSON_BASE;mission/acs/str/ArcsecJsonParamBase.h
+0x63a0;NVMB_KeyNotExists;Specified key does not exist in json file;160;NVM_PARAM_BASE;mission/memory/NvmParameterBase.h
+0x64a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;160;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
+0x64a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;161;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
+0x65a0;PLMPHLP_FileWriteError;File error occured for file transfers from OBC to the MPSoC.;160;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocSpecialComHelper.h
+0x65a1;PLMPHLP_FileReadError;File error occured for file transfers from MPSoC to OBC.;161;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocSpecialComHelper.h
+0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
+0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
+0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
+0x66a3;SADPL_SwitchingDeplSa1Failed;No description;163;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
+0x66a4;SADPL_SwitchingDeplSa2Failed;No description;164;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
+0x67a0;MPSOCRTVIF_CrcFailure;Space Packet received from PLOC has invalid CRC;160;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a1;MPSOCRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC;161;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a2;MPSOCRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC;162;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a3;MPSOCRTVIF_InvalidApid;Received space packet with invalid APID from PLOC;163;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a4;MPSOCRTVIF_InvalidLength;Received command with invalid length;164;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a5;MPSOCRTVIF_FilenameTooLong;Filename of file in OBC filesystem is too long;165;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a6;MPSOCRTVIF_MpsocHelperExecuting;MPSoC helper is currently executing a command;166;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a7;MPSOCRTVIF_MpsocFilenameTooLong;Filename of MPSoC file is to long (max. 256 bytes);167;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a8;MPSOCRTVIF_InvalidParameter;Command has invalid parameter;168;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x67a9;MPSOCRTVIF_NameTooLong;Received command has file string with invalid length;169;MPSOC_RETURN_VALUES_IF;linux/payload/mpsocRetvals.h
+0x68a0;SPVRTVIF_CrcFailure;Space Packet received from PLOC supervisor has invalid CRC;160;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a1;SPVRTVIF_InvalidServiceId;No description;161;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a2;SPVRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC supervisor;162;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a3;SPVRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC supervisor;163;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a4;SPVRTVIF_InvalidApid;Received space packet with invalid APID from PLOC supervisor;164;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a5;SPVRTVIF_GetTimeFailure;Failed to read current system time;165;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a6;SPVRTVIF_InvalidWatchdog;Received command with invalid watchdog parameter. Valid watchdogs are 0 for PS, 1 for PL and 2 for INT;166;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a7;SPVRTVIF_InvalidWatchdogTimeout;Received watchdog timeout config command with invalid timeout. Valid timeouts must be in the range between 1000 and 360000 ms.;167;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a8;SPVRTVIF_InvalidLatchupId;Received latchup config command with invalid latchup ID;168;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68a9;SPVRTVIF_SweepPeriodTooSmall;Received set adc sweep period command with invalid sweep period. Must be larger than 21.;169;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68aa;SPVRTVIF_InvalidTestParam;Receive auto EM test command with invalid test param. Valid params are 1 and 2.;170;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68ab;SPVRTVIF_MramPacketParsingFailure;Returned when scanning for MRAM dump packets failed.;171;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68ac;SPVRTVIF_InvalidMramAddresses;Returned when the start and stop addresses of the MRAM dump or MRAM  wipe commands are invalid (e.g. start address bigger than stop address);172;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68ad;SPVRTVIF_NoMramPacket;Expect reception of an MRAM dump packet but received space packet with other apid.;173;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68ae;SPVRTVIF_PathDoesNotExist;Path to PLOC directory on SD card does not exist;174;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68af;SPVRTVIF_MramFileNotExists;MRAM dump file does not exists. The file should actually already have been created with the reception of the first dump packet.;175;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68b0;SPVRTVIF_InvalidReplyLength;No description;176;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68b1;SPVRTVIF_InvalidLength;Received action command has invalid length;177;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68b2;SPVRTVIF_FilenameTooLong;Filename too long;178;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68b3;SPVRTVIF_UpdateStatusReportInvalidLength;Received update status report with invalid packet length field;179;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68b4;SPVRTVIF_UpdateCrcFailure;Update status report does not contain expected CRC. There might be a bit flip in the update memory region.;180;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68b5;SPVRTVIF_SupvHelperExecuting;Supervisor helper task ist currently executing a command (wait until helper tas has finished or interrupt by sending the terminate command);181;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68c0;SPVRTVIF_BufTooSmall;No description;192;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x68c1;SPVRTVIF_NoReplyTimeout;No description;193;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
+0x6900;ACSCTRL_FileDeletionFailed;File deletion failed and at least one file is still existent.;0;ACS_CTRL;mission/controller/AcsController.h
+0x6a02;ACSMEKF_MekfUninitialized;No description;2;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6a03;ACSMEKF_MekfNoGyrData;No description;3;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6a04;ACSMEKF_MekfNoModelVectors;No description;4;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6a05;ACSMEKF_MekfNoSusMgmStrData;No description;5;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6a06;ACSMEKF_MekfCovarianceInversionFailed;No description;6;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6a07;ACSMEKF_MekfNotFinite;No description;7;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6a08;ACSMEKF_MekfInitialized;No description;8;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6a09;ACSMEKF_MekfRunning;No description;9;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
+0x6b00;SDMA_OpOngoing;No description;0;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b01;SDMA_AlreadyOn;No description;1;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b02;SDMA_AlreadyMounted;No description;2;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b03;SDMA_AlreadyOff;No description;3;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b0a;SDMA_StatusFileNexists;No description;10;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b0b;SDMA_StatusFileFormatInvalid;No description;11;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b0c;SDMA_MountError;No description;12;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b0d;SDMA_UnmountError;No description;13;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b0e;SDMA_SystemCallError;No description;14;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6b0f;SDMA_PopenCallError;No description;15;SD_CARD_MANAGER;bsp_q7s/fs/SdCardManager.h
+0x6c00;LPH_SdNotReady;No description;0;LOCAL_PARAM_HANDLER;bsp_q7s/memory/LocalParameterHandler.h
+0x6d00;PTM_DumpDone;No description;0;PERSISTENT_TM_STORE;mission/tmtc/PersistentTmStore.h
+0x6d01;PTM_BusyDumping;No description;1;PERSISTENT_TM_STORE;mission/tmtc/PersistentTmStore.h
+0x6e00;TMS_IsBusy;No description;0;TM_SINK;mission/tmtc/DirectTmSinkIF.h
+0x7000;SCBU_KeyNotFound;No description;0;SCRATCH_BUFFER;bsp_q7s/memory/scratchApi.h

eive_tmtc/tmtc/acs/gps.py

@@ -242,7 +242,7 @@ def handle_skyview_data(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"Skyview Time: {unix} unix-sec")
     pw.dlog(
         "{:<8} {:<8} {:<8} {:<8} {:<8}".format(
-            "PRN_ID", "AZ [°]", "EL [°]", "S2N [dBW]", "USED"
+            "PRN_ID", "AZ [°]", "EL [°]", "S2N [dBHz]", "USED"
         )
     )
     for idx in range(GpsInfo.MAX_SATELLITES):

eive_tmtc/tmtc/power/__init__.py

@@ -0,0 +1 @@
+from .subsystem import add_eps_subsystem_cmds

eive_tmtc/tmtc/power/pwr_ctrl.py

@@ -0,0 +1,303 @@
+import datetime
+import enum
+import logging
+import struct
+
+from eive_tmtc.config.definitions import CustomServiceList
+from eive_tmtc.config.object_ids import PWR_CONTROLLER
+from eive_tmtc.pus_tm.defs import PrintWrapper
+from tmtccmd.config.tmtc import (
+    tmtc_definitions_provider,
+    TmtcDefinitionWrapper,
+    OpCodeEntry,
+)
+from tmtccmd.tc import service_provider
+from tmtccmd.tc.queue import DefaultPusQueueHelper
+from tmtccmd.tc.pus_200_fsfw_mode import Mode, pack_mode_command
+from tmtccmd.tc.decorator import ServiceProviderParams
+from tmtccmd.tc.pus_3_fsfw_hk import (
+    generate_one_hk_command,
+    make_sid,
+    enable_periodic_hk_command_with_interval,
+    disable_periodic_hk_command,
+    create_request_one_diag_command,
+)
+from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
+
+from tmtccmd.tc.pus_20_fsfw_param import create_load_param_cmd
+
+from tmtccmd.pus.s20_fsfw_param_defs import (
+    create_scalar_float_parameter,
+    create_scalar_double_parameter,
+)
+
+_LOGGER = logging.getLogger(__name__)
+
+
+class SetId(enum.IntEnum):
+    CORE_HK_SET = 0
+    ENABLE_PL_SET = 1
+
+
+# class ActionId(enum.IntEnum):
+
+
+class ParamId(enum.IntEnum):
+    BATTERY_INTERNAL_RESISTANCE = 0
+    BATTERY_MAXIMUM_CAPACITY = 1
+    COULOMB_COUNTER_VOLTAGE_UPPER_THRESHOLD = 2
+    MAX_ALLOWED_TIME_DIFF = 3
+    PAYLOAD_OP_LIMIT_ON = 4
+    PAYLOAD_OP_LIMIT_LOW = 5
+    HIGHER_MODES_LIMIT = 6
+
+
+class OpCodes:
+    OFF = ["mode_off"]
+    ON = ["mode_on"]
+    NML = ["mode_normal"]
+    SET_PARAMETER = ["set_parameter"]
+    REQUEST_CORE_HK = ["core_hk"]
+    ENABLE_CORE_HK = ["core_enable_hk"]
+    DISABLE_CORE_HK = ["core_disable_hk"]
+    REQUEST_ENABLE_PL_HK = ["enable_pl_hk"]
+    ENABLE_ENABLE_PL_HK = ["enable_pl_enable_hk"]
+    DISABLE_ENABLE_PL_HK = ["enable_pl_disable_hk"]
+
+
+class Info:
+    OFF = "PWR Ctrl Mode to OFF"
+    ON = "PWR Ctrl Mode to ON"
+    NML = "PWR Ctrl Mode to NORMAL"
+    SET_PARAMETER = "Set Parameter"
+    REQUEST_CORE_HK = "Request Core HK once"
+    ENABLE_CORE_HK = "Enable Core HK Data Generation"
+    DISABLE_CORE_HK = "Disable Core HK Data Generation"
+    REQUEST_ENABLE_PL_HK = "Request Enable PL HK once"
+    ENABLE_ENABLE_PL_HK = "Enable Enable PL HK Data Generation"
+    DISABLE_ENABLE_PL_HK = "Disable Enable PL HK Data Generation"
+
+
+@tmtc_definitions_provider
+def acs_cmd_defs(defs: TmtcDefinitionWrapper):
+    oce = OpCodeEntry()
+    oce.add(keys=OpCodes.OFF, info=Info.OFF)
+    oce.add(keys=OpCodes.ON, info=Info.ON)
+    oce.add(keys=OpCodes.NML, info=Info.NML)
+    oce.add(keys=OpCodes.SET_PARAMETER, info=Info.SET_PARAMETER)
+    oce.add(keys=OpCodes.REQUEST_CORE_HK, info=Info.REQUEST_CORE_HK)
+    oce.add(keys=OpCodes.ENABLE_CORE_HK, info=Info.ENABLE_CORE_HK)
+    oce.add(keys=OpCodes.DISABLE_CORE_HK, info=Info.DISABLE_CORE_HK)
+    oce.add(keys=OpCodes.REQUEST_ENABLE_PL_HK, info=Info.REQUEST_ENABLE_PL_HK)
+    oce.add(keys=OpCodes.ENABLE_ENABLE_PL_HK, info=Info.ENABLE_ENABLE_PL_HK)
+    oce.add(keys=OpCodes.DISABLE_ENABLE_PL_HK, info=Info.DISABLE_ENABLE_PL_HK)
+    defs.add_service(
+        name=CustomServiceList.PWR_CTRL.value, info="PWR Controller", op_code_entry=oce
+    )
+
+
+@service_provider(CustomServiceList.PWR_CTRL.value)
+def pack_acs_ctrl_command(p: ServiceProviderParams):
+    op_code = p.op_code
+    q = p.queue_helper
+    if op_code in OpCodes.OFF:
+        q.add_log_cmd(f"{Info.OFF}")
+        q.add_pus_tc(pack_mode_command(PWR_CONTROLLER, Mode.OFF, 0))
+    elif op_code in OpCodes.ON:
+        q.add_log_cmd(f"{Info.ON}")
+        q.add_pus_tc(pack_mode_command(PWR_CONTROLLER, Mode.ON, 0))
+    elif op_code in OpCodes.NML:
+        q.add_log_cmd(f"{Info.NML}")
+        q.add_pus_tc(pack_mode_command(PWR_CONTROLLER, Mode.NORMAL, 0))
+    elif op_code in OpCodes.SET_PARAMETER:
+        q.add_log_cmd(f"{Info.SET_PARAMETER}")
+        set_pwr_ctrl_param(q)
+    elif op_code in OpCodes.REQUEST_CORE_HK:
+        q.add_log_cmd(Info.REQUEST_CORE_HK)
+        q.add_pus_tc(
+            generate_one_hk_command(make_sid(PWR_CONTROLLER, SetId.CORE_HK_SET))
+        )
+    elif op_code in OpCodes.ENABLE_CORE_HK:
+        interval = float(input("Please specify interval in floating point seconds: "))
+        q.add_log_cmd(Info.ENABLE_CORE_HK)
+        cmd_tuple = enable_periodic_hk_command_with_interval(
+            False, make_sid(PWR_CONTROLLER, SetId.CORE_HK_SET), interval
+        )
+        q.add_pus_tc(cmd_tuple[0])
+        q.add_pus_tc(cmd_tuple[1])
+    elif op_code in OpCodes.DISABLE_CORE_HK:
+        q.add_log_cmd(Info.DISABLE_CORE_HK)
+        q.add_pus_tc(
+            disable_periodic_hk_command(
+                False, make_sid(PWR_CONTROLLER, SetId.CORE_HK_SET)
+            )
+        )
+    elif op_code in OpCodes.REQUEST_ENABLE_PL_HK:
+        q.add_log_cmd(Info.REQUEST_ENABLE_PL_HK)
+        q.add_pus_tc(
+            generate_one_hk_command(make_sid(PWR_CONTROLLER, SetId.ENABLE_PL_SET))
+        )
+    elif op_code in OpCodes.ENABLE_ENABLE_PL_HK:
+        interval = float(input("Please specify interval in floating point seconds: "))
+        q.add_log_cmd(Info.ENABLE_ENABLE_PL_HK)
+        cmd_tuple = enable_periodic_hk_command_with_interval(
+            False, make_sid(PWR_CONTROLLER, SetId.ENABLE_PL_SET), interval
+        )
+        q.add_pus_tc(cmd_tuple[0])
+        q.add_pus_tc(cmd_tuple[1])
+    elif op_code in OpCodes.DISABLE_ENABLE_PL_HK:
+        q.add_log_cmd(Info.DISABLE_ENABLE_PL_HK)
+        q.add_pus_tc(
+            disable_periodic_hk_command(
+                False, make_sid(PWR_CONTROLLER, SetId.ENABLE_PL_SET)
+            )
+        )
+
+
+def set_pwr_ctrl_param(q: DefaultPusQueueHelper):
+    for val in ParamId:
+        print("{:<2}: {:<20}".format(val, val.name))
+    param = int(input(f"Specify parameter to set \n" f""))
+    match param:
+        case ParamId.BATTERY_INTERNAL_RESISTANCE:
+            value = float(input("Specify parameter value to set [Ohm]: "))
+            q.add_pus_tc(
+                create_load_param_cmd(
+                    create_scalar_float_parameter(
+                        object_id=PWR_CONTROLLER,
+                        domain_id=0,
+                        unique_id=ParamId.BATTERY_INTERNAL_RESISTANCE,
+                        parameter=value,
+                    )
+                )
+            )
+        case ParamId.BATTERY_MAXIMUM_CAPACITY:
+            value = float(input("Specify parameter value to set [Ah]: "))
+            q.add_pus_tc(
+                create_load_param_cmd(
+                    create_scalar_float_parameter(
+                        object_id=PWR_CONTROLLER,
+                        domain_id=0,
+                        unique_id=ParamId.BATTERY_MAXIMUM_CAPACITY,
+                        parameter=value,
+                    )
+                )
+            )
+        case ParamId.COULOMB_COUNTER_VOLTAGE_UPPER_THRESHOLD:
+            value = float(input("Specify parameter value to set [V]: "))
+            q.add_pus_tc(
+                create_load_param_cmd(
+                    create_scalar_float_parameter(
+                        object_id=PWR_CONTROLLER,
+                        domain_id=0,
+                        unique_id=ParamId.COULOMB_COUNTER_VOLTAGE_UPPER_THRESHOLD,
+                        parameter=value,
+                    )
+                )
+            )
+        case ParamId.MAX_ALLOWED_TIME_DIFF:
+            value = float(input("Specify parameter value to set [s]: "))
+            q.add_pus_tc(
+                create_load_param_cmd(
+                    create_scalar_double_parameter(
+                        object_id=PWR_CONTROLLER,
+                        domain_id=0,
+                        unique_id=ParamId.MAX_ALLOWED_TIME_DIFF,
+                        parameter=value,
+                    )
+                )
+            )
+        case ParamId.PAYLOAD_OP_LIMIT_ON:
+            value = float(input("Specify parameter value to set [1]: "))
+            q.add_pus_tc(
+                create_load_param_cmd(
+                    create_scalar_float_parameter(
+                        object_id=PWR_CONTROLLER,
+                        domain_id=0,
+                        unique_id=ParamId.PAYLOAD_OP_LIMIT_ON,
+                        parameter=value,
+                    )
+                )
+            )
+        case ParamId.PAYLOAD_OP_LIMIT_LOW:
+            value = float(input("Specify parameter value to set [1]: "))
+            q.add_pus_tc(
+                create_load_param_cmd(
+                    create_scalar_float_parameter(
+                        object_id=PWR_CONTROLLER,
+                        domain_id=0,
+                        unique_id=ParamId.PAYLOAD_OP_LIMIT_LOW,
+                        parameter=value,
+                    )
+                )
+            )
+        case ParamId.HIGHER_MODES_LIMIT:
+            value = float(input("Specify parameter value to set [1]: "))
+            q.add_pus_tc(
+                create_load_param_cmd(
+                    create_scalar_float_parameter(
+                        object_id=PWR_CONTROLLER,
+                        domain_id=0,
+                        unique_id=ParamId.HIGHER_MODES_LIMIT,
+                        parameter=value,
+                    )
+                )
+            )
+
+
+def handle_pwr_ctrl_hk_data(
+    pw: PrintWrapper,
+    set_id: int,
+    hk_data: bytes,
+    packet_time: datetime.datetime,
+):
+    pw.ilog(_LOGGER, f"Received PWR CTRL HK with packet time {packet_time}")
+    match set_id:
+        case SetId.CORE_HK_SET:
+            handle_core_hk_data(pw, hk_data)
+        case SetId.ENABLE_PL_SET:
+            handle_enable_pl_data(pw, hk_data)
+
+
+def handle_core_hk_data(pw: PrintWrapper, hk_data: bytes):
+    pw.dlog("Received Core HK Set")
+    fmt_int16 = "!h"
+    fmt_float = "!f"
+    inc_len_int16 = struct.calcsize(fmt_int16)
+    inc_len_float = struct.calcsize(fmt_float)
+    if len(hk_data) < inc_len_int16 + 2 * inc_len_float:
+        pw.dlog("Received HK set too small")
+        return
+    current_idx = 0
+    total_battery_current = struct.unpack(
+        fmt_int16, hk_data[current_idx : current_idx + inc_len_int16]
+    )[0]
+    current_idx += inc_len_int16
+    open_circuit_voltage_charge = struct.unpack(
+        fmt_float, hk_data[current_idx : current_idx + inc_len_float]
+    )[0]
+    current_idx += inc_len_float
+    coulomb_counter_charge = struct.unpack(
+        fmt_float, hk_data[current_idx : current_idx + inc_len_float]
+    )[0]
+    current_idx += inc_len_float
+    pw.dlog(f"Total Battery Current: {total_battery_current} [mA]")
+    pw.dlog(f"Open Circuit Voltage Charge: {open_circuit_voltage_charge*100:8.3f} [%]")
+    pw.dlog(f"Coulomb Counter Charge: {coulomb_counter_charge*100:8.3f} [%]")
+    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3)
+
+
+def handle_enable_pl_data(pw: PrintWrapper, hk_data: bytes):
+    pw.dlog("Received Enable PL HK Set")
+    fmt_uint16 = "!B"
+    inc_len_uint16 = struct.calcsize(fmt_uint16)
+    if len(hk_data) < inc_len_uint16:
+        pw.dlog("Received HK set too small")
+        return
+    current_idx = 0
+    pl_use_allowed = struct.unpack(
+        fmt_uint16, hk_data[current_idx : current_idx + inc_len_uint16]
+    )[0]
+    current_idx += inc_len_uint16
+    pw.dlog(f"PL Use Allowed: {pl_use_allowed}")
+    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=1)

eive_tmtc/tmtc/power/subsystem.py

@@ -0,0 +1,68 @@
+import enum
+from typing import Tuple, Dict
+
+from spacepackets.ecss import PusTelecommand
+from eive_tmtc.tmtc.common import pack_mode_cmd_with_info
+from eive_tmtc.config.object_ids import EPS_SUBSYSTEM_ID
+from eive_tmtc.config.definitions import CustomServiceList
+from tmtccmd.config.tmtc import (
+    tmtc_definitions_provider,
+    TmtcDefinitionWrapper,
+    OpCodeEntry,
+)
+from tmtccmd.tc.pus_200_fsfw_mode import Subservice as ModeSubservices, Mode
+from tmtccmd.tc import service_provider
+from tmtccmd.tc.decorator import ServiceProviderParams
+
+
+class OpCode(str, enum.Enum):
+    OFF = "off"
+    NML = "normal"
+    REPORT_ALL_MODES = "all_modes"
+
+
+class Info(str, enum.Enum):
+    OFF = "Off Mode Command"
+    NML = "Normal Mode Command"
+    REPORT_ALL_MODES = "Report All Modes Recursively"
+
+
+HANDLER_LIST: Dict[str, Tuple[int, int, str]] = {
+    OpCode.OFF: (Mode.OFF, 0, Info.OFF),
+    OpCode.NML: (Mode.NORMAL, 0, Info.NML),
+}
+
+
+@service_provider(CustomServiceList.EPS_SS.value)
+def build_eps_subsystem_cmd(p: ServiceProviderParams):
+    op_code = p.op_code
+    q = p.queue_helper
+    info_prefix = "EPS Subsystem"
+    if op_code in OpCode.REPORT_ALL_MODES:
+        q.add_log_cmd(f"{info_prefix}: {Info.REPORT_ALL_MODES}")
+        q.add_pus_tc(
+            PusTelecommand(
+                service=200,
+                subservice=ModeSubservices.TC_MODE_ANNOUNCE_RECURSIVE,
+                app_data=EPS_SUBSYSTEM_ID,
+            )
+        )
+    mode_info_tup = HANDLER_LIST.get(op_code)
+    if mode_info_tup is None:
+        return
+    pack_mode_cmd_with_info(
+        object_id=EPS_SUBSYSTEM_ID,
+        info=f"{info_prefix}: {mode_info_tup[2]}",
+        mode=mode_info_tup[0],
+        submode=mode_info_tup[1],
+        q=q,
+    )
+
+
+@tmtc_definitions_provider
+def add_eps_subsystem_cmds(defs: TmtcDefinitionWrapper):
+    oce = OpCodeEntry()
+    for op_code, (_, _, info) in HANDLER_LIST.items():
+        oce.add(op_code, info)
+    oce.add(OpCode.REPORT_ALL_MODES, Info.REPORT_ALL_MODES)
+    defs.add_service(CustomServiceList.EPS_SS, "EPS Subsystem", oce)