pus_tc/cmd_definitions.py

@@ -560,7 +560,6 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
         "1": ("PLOC Supervisor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "2": ("PLOC Supervisor: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "3": ("PLOC Supervisor: Get HK Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("PLOC Supervisor: Restart MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "5": ("PLOC Supervisor: Start MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "6": ("PLOC Supervisor: Shutdown MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "7": (
@@ -576,18 +575,9 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
             "PLOC Supervisor: Request boot status report",
             {OpCodeDictKeys.TIMEOUT: 2.0},
         ),
-        "14": ("PLOC Supervisor: Update available", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "15": ("PLOC Supervisor: Watchdogs enable", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "16": (
-            "PLOC Supervisor: Watchdog Configure Timeout",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
         "17": ("PLOC Supervisor: Enable latchup alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "18": ("PLOC Supervisor: Disable latchup alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "19": ("PLOC Supervisor: Auto calibrate alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "20": ("PLOC Supervisor: Set alert limit", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "21": ("PLOC Supervisor: Set alert irq filter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "22": ("PLOC Supervisor: Set ADC sweep period", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "23": (
             "PLOC Supervisor: Set ADC enabled channels",
             {OpCodeDictKeys.TIMEOUT: 2.0},
@@ -604,8 +594,6 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
         "27": ("PLOC Supervisor: Copy ADC data to MRAM", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "30": ("PLOC Supervisor: Run auto EM tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "31": ("PLOC Supervisor: MRAM Wipe", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "33": ("PLOC Supervisor: Print CPU stats", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "34": ("PLOC Supervisor: Set debug verbosity", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "35": ("PLOC Supervisor: Set GPIO", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "36": ("PLOC Supervisor: Read GPIO", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "37": ("PLOC Supervisor: Restart supervisor", {OpCodeDictKeys.TIMEOUT: 2.0}),
@@ -628,8 +616,6 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
         "46": ("PLOC Supervisor: Factory flash", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "47": ("PLOC Supervisor: Enable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "48": ("PLOC Supervisor: Disable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "49": ("PLOC Supervisor: Enable ADC monitor task", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "50": ("PLOC Supervisor: Disable ADC monitor task", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "51": ("PLOC Supervisor: Logging request event buffers", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "52": ("PLOC Supervisor: Logging clear counters", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "53": ("PLOC Supervisor: Logging set topic", {OpCodeDictKeys.TIMEOUT: 2.0}),

pus_tc/devs/ploc_mpsoc.py

@@ -59,8 +59,10 @@ class MemAddresses(enum.IntEnum):
     DEADBEEF = 0x40000004
 
 
-class PlocReplyIds:
+class PlocReplyIds(enum.IntEnum):
-    tm_mem_read_report = 6
+    TM_MEM_READ_RPT = 6
+    TM_CAM_CMD_RPT = 19
+
 
 
 def pack_ploc_mpsoc_commands(

pus_tc/devs/ploc_supervisor.py

@@ -44,7 +44,6 @@ event_buffer_path_dict = {
 
 class SupvActionIds:
     HK_REPORT = 1
-    RESTART_MPSOC = 2
     START_MPSOC = 3
     SHUTWOWN_MPSOC = 4
     SEL_MPSOC_BOOT_IMAGE = 5
@@ -55,27 +54,19 @@ class SupvActionIds:
     DISABLE_HK = 10
     GET_BOOT_STATUS_REPORT = 11
     UPDATE_AVAILABLE = 12
-    WATCHDOGS_ENABLE = 13
-    WATCHDOGS_CONFIG_TIMEOUT = 14
     ENABLE_LATCHUP_ALERT = 15
     DISABLE_LATCHUP_ALERT = 16
-    AUTO_CALIBRATE_ALERT = 17
     SET_ALERT_LIMIT = 18
-    SET_ALERT_IRQ_FILTER = 19
     SET_ADC_SWEEP_PERIOD = 20
     SET_ADC_ENABLED_CHANNELS = 21
     SET_ADC_WINDOW_AND_STRIDE = 22
     SET_ADC_THRESHOLD = 23
     GET_LATCHUP_STATUS_REPORT = 24
     COPY_ADC_DATA_TO_MRAM = 25
-    ENABLE_NVMS = 26
     SELECT_NVM = 27
     RUN_AUTO_EM_TESTS = 28
     WIPE_MRAM = 29
     DUMP_MRAM = 30
-    SET_DBG_VERBOSITY = 31
-    CAN_LOOPBACK_TEST = 32
-    PRINT_CPU_STATS = 33
     SET_GPIO = 34
     READ_GPIO = 35
     RESTART_SUPERVISOR = 36
@@ -91,8 +82,6 @@ class SupvActionIds:
     TERMINATE_SUPV_HELPER = 49
     ENABLE_AUTO_TM = 50
     DISABLE_AUTO_TM = 51
-    ENABLE_ADC_MONITOR_TASK = 52
-    DISABLE_ADC_MONITOR_TASK = 53
     LOGGING_REQUEST_EVENT_BUFFERS = 54
     LOGGING_CLEAR_COUNTERS = 55
     LOGGING_SET_TOPIC = 56
@@ -134,11 +123,6 @@ def pack_ploc_supv_commands(
         command = object_id + struct.pack("!I", SupvActionIds.HK_REPORT)
         command = PusTelecommand(service=8, subservice=128, ssc=20, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "4":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Restart MPSoC"))
-        command = object_id + struct.pack("!I", SupvActionIds.RESTART_MPSOC)
-        command = PusTelecommand(service=8, subservice=128, ssc=21, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
     elif op_code == "5":
         tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Start MPSoC"))
         command = object_id + struct.pack("!I", SupvActionIds.START_MPSOC)
@@ -162,9 +146,9 @@ def pack_ploc_supv_commands(
         tc_queue.appendleft(command.pack_command_tuple())
     elif op_code == "8":
         tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set max restart tries: ")
+            (QueueCommands.PRINT, "PLOC Supervisor: Set max restart tries")
         )
-        restart_tries = int(input("Set maximum restart tries:"))
+        restart_tries = int(input("Specify maximum restart tries: "))
         command = (
             object_id
             + struct.pack("!I", SupvActionIds.SET_MAX_RESTART_TRIES)
@@ -206,23 +190,6 @@ def pack_ploc_supv_commands(
         command = object_id + struct.pack("!I", SupvActionIds.GET_BOOT_STATUS_REPORT)
         command = PusTelecommand(service=8, subservice=128, ssc=30, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "14":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Update available"))
-        command = pack_update_available_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=31, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "15":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Watchdogs Enable"))
-        command = pack_watchdogs_enable_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "16":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Watchdog configure timeout")
-        )
-        command = pack_watchdog_config_timeout_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=33, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
     elif op_code == "17":
         tc_queue.appendleft(
             (QueueCommands.PRINT, "PLOC Supervisor: Enable latchup alert")
@@ -237,32 +204,11 @@ def pack_ploc_supv_commands(
         command = pack_lachtup_alert_cmd(object_id, False)
         command = PusTelecommand(service=8, subservice=128, ssc=35, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "19":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Auto calibrate alert")
-        )
-        command = pack_auto_calibrate_alert_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=36, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
     elif op_code == "20":
         tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set alert limit"))
         command = pack_set_alert_limit_cmd(object_id)
         command = PusTelecommand(service=8, subservice=128, ssc=37, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "21":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set alert irq filter")
-        )
-        command = pack_set_alert_irq_filter_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=38, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "22":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set ADC sweep period")
-        )
-        command = pack_set_adc_sweep_period_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=39, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
     elif op_code == "23":
         tc_queue.appendleft(
             (QueueCommands.PRINT, "PLOC Supervisor: Set ADC enabled channels")
@@ -306,18 +252,6 @@ def pack_ploc_supv_commands(
         command = pack_mram_wipe_cmd(object_id)
         command = PusTelecommand(service=8, subservice=128, ssc=46, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "33":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Print CPU stats"))
-        command = pack_print_cpu_stats_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=48, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "34":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set debug verbosity")
-        )
-        command = pack_set_debug_verbosity_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=49, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
     elif op_code == "35":
         tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set GPIO command"))
         command = pack_set_gpio_cmd(object_id)
@@ -412,20 +346,6 @@ def pack_ploc_supv_commands(
         )
         command = PusTelecommand(service=8, subservice=128, ssc=63, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "49":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Enable ADC monitor task"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.ENABLE_ADC_MONITOR_TASK
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=64, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "50":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Disable ADC monitor task"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.DISABLE_ADC_MONITOR_TASK
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=65, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
     elif op_code == "51":
         tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Logging request event buffers"))
         command = pack_logging_buffer_request(object_id)
@@ -590,44 +510,15 @@ def pack_set_alert_limit_cmd(object_id: bytearray) -> bytearray:
     return command
 
 
-def pack_set_alert_irq_filter_cmd(object_id: bytearray) -> bytearray:
-    """
-    @brief  This function packs the command to configure the latchup alert irq filter.
-    @param object_id    The object id of the PLOC supervisor handler.
-    """
-    latchup_id = get_latchup_id()
-    tp = int(input("Specify filter type (TP):"))
-    div = int(input("Specify clock divider (DIV):"))
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ALERT_IRQ_FILTER)
-    command = command + struct.pack("!B", latchup_id)
-    command = command + struct.pack("!B", tp)
-    command = command + struct.pack("!B", div)
-    return command
-
-
-def pack_set_adc_sweep_period_cmd(object_id: bytearray) -> bytearray:
-    """
-    @brief  This function packs the command to set the limit of a latchup alert.
-    @param object_id    The object id of the PLOC supervisor handler.
-    """
-    sweep_period = int(input("Specify sweep period (min 21 us):"))
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ADC_SWEEP_PERIOD)
-    command = command + struct.pack("!I", sweep_period)
-    return command
-
-
 def pack_set_adc_enabled_channels_cmd(object_id: bytearray) -> bytearray:
     """
     @brief  This function packs the command to enable or disable channels of the ADC.
     @param object_id    The object id of the PLOC supervisor handler.
     """
     ch = int(input("Specify ch: 0x"), 16)
-    command = bytearray()
+    cmd = object_id + struct.pack("!I", SupvActionIds.SET_ADC_ENABLED_CHANNELS)
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ADC_ENABLED_CHANNELS)
+    cmd = cmd + struct.pack("!H", ch)
-    command = command + struct.pack("!H", ch)
+    return cmd
-    return command
 
 
 def pack_set_adc_window_and_stride_cmd(object_id: bytearray) -> bytearray:
@@ -648,16 +539,6 @@ def pack_set_adc_threshold_cmd(object_id: bytearray) -> bytearray:
     return command
 
 
-def pack_enable_nvms_cmd(object_id: bytearray) -> bytearray:
-    n01 = int(input("NVM0/1 (0 - off, 1 - on):"))
-    n3 = int(input("NVM3 (0 - off, 1 - on):"))
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.ENABLE_NVMS)
-    command = command + struct.pack("!B", n01)
-    command = command + struct.pack("!B", n3)
-    return command
-
-
 def pack_select_nvm_cmd(object_id: bytearray) -> bytearray:
     mem = int(input("Specify NVM (0 - NVM0, 1 - MVM1): "))
     command = bytearray()
@@ -684,22 +565,6 @@ def pack_mram_wipe_cmd(object_id: bytearray) -> bytearray:
     return command
 
 
-def pack_print_cpu_stats_cmd(object_id: bytearray) -> bytearray:
-    en = 1
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.PRINT_CPU_STATS)
-    command = command + struct.pack("!B", en)
-    return command
-
-
-def pack_set_debug_verbosity_cmd(object_id: bytearray) -> bytearray:
-    command = bytearray()
-    verbosity = get_debug_verbosity()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_DBG_VERBOSITY)
-    command = command + struct.pack("!B", verbosity)
-    return command
-
-
 def pack_update_command(object_id: bytearray) -> bytearray:
     command = bytearray()
     memory_id = int(input("Specify memory ID: "))
@@ -733,31 +598,6 @@ def pack_logging_buffer_request(object_id: bytearray) -> bytearray:
     return command
 
 
-def get_debug_verbosity() -> int:
-    tries = 0
-    while tries < 3:
-        try:
-            print("Debug verbosity options")
-            verbosity_options_dict = {
-                0: "None",
-                1: "Error",
-                2: "Warn",
-                3: "Info",
-            }
-            print("{:<6} | {}".format("Key", "Description"))
-            for entry in verbosity_options_dict.items():
-                print("{:<6} | {}".format(entry[0], entry[1]))
-            verbosity = int(input("Specify verbosity key: "))
-            if verbosity > len(verbosity_options_dict) - 1:
-                raise ValueError
-            return verbosity
-        except ValueError:
-            LOGGER.warning("Invalid verbosity key specified")
-            tries = tries + 1
-    LOGGER.error("get_debug_verbosity: Exceeded max tries to input verbosity key")
-    quit()
-
-
 def pack_set_gpio_cmd(object_id: bytearray) -> bytearray:
     port = int(input("Specify port : 0x"), 16)
     pin = int(input("Specify pin: 0x"), 16)

pus_tm/action_reply_handler.py

@@ -58,7 +58,7 @@ def handle_imtq_replies(
 def handle_ploc_replies(
     action_id: int, printer: FsfwTmTcPrinter, custom_data: bytearray
 ):
-    if action_id == PlocReplyIds.tm_mem_read_report:
+    if action_id == PlocReplyIds.TM_MEM_READ_RPT:
         header_list = [
             "PLOC Memory Address",
             "PLOC Mem Len",
@@ -73,6 +73,13 @@ def handle_ploc_replies(
         print(content_list)
         printer.file_logger.info(header_list)
         printer.file_logger.info(content_list)
+    elif action_id == PlocReplyIds.TM_CAM_CMD_RPT:
+        header_list = ["Camera reply string", "ACK"]
+        content_list = [custom_data[:len(custom_data) - 1].decode('utf-8'), hex(custom_data[-1])]
+        print(header_list)
+        print(content_list)
+        printer.file_logger.info(header_list)
+        printer.file_logger.info(content_list)
 
 
 def handle_supervisor_replies(
@@ -86,6 +93,13 @@ def handle_supervisor_replies(
         print(content_list)
         printer.file_logger.info(header_list)
         printer.file_logger.info(content_list)
+    elif action_id == SupvActionIds.READ_GPIO:
+        header_list = ["GPIO state"]
+        content_list = [struct.unpack('!H', custom_data[:2])[0]]
+        print(header_list)
+        print(content_list)
+        printer.file_logger.info(header_list)
+        printer.file_logger.info(content_list)
 
 
 def handle_startracker_replies(

tmtccmd

@@ -1 +1 @@
-Subproject commit ea2992372f1ece7a9dab297ae390a5ab729e8f04
+Subproject commit 33a730815207c6f1dd6947e895e243d28d0b1e5a