20 KiB
20 KiB
1 | 2200 | 0x0898 | STORE_SEND_WRITE_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
---|---|---|---|---|---|---|
2 | 2201 | 0x0899 | STORE_WRITE_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
3 | 2202 | 0x089a | STORE_SEND_READ_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
4 | 2203 | 0x089b | STORE_READ_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
5 | 2204 | 0x089c | UNEXPECTED_MSG | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
6 | 2205 | 0x089d | STORING_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
7 | 2206 | 0x089e | TM_DUMP_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
8 | 2207 | 0x089f | STORE_INIT_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
9 | 2208 | 0x08a0 | STORE_INIT_EMPTY | INFO | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
10 | 2209 | 0x08a1 | STORE_CONTENT_CORRUPTED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
11 | 2210 | 0x08a2 | STORE_INITIALIZE | INFO | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
12 | 2211 | 0x08a3 | INIT_DONE | INFO | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
13 | 2212 | 0x08a4 | DUMP_FINISHED | INFO | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
14 | 2213 | 0x08a5 | DELETION_FINISHED | INFO | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
15 | 2214 | 0x08a6 | DELETION_FAILED | LOW | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
16 | 2215 | 0x08a7 | AUTO_CATALOGS_SENDING_FAILED | INFO | fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h | |
17 | 2600 | 0x0a28 | GET_DATA_FAILED | LOW | fsfw\src\fsfw\storagemanager\StorageManagerIF.h | |
18 | 2601 | 0x0a29 | STORE_DATA_FAILED | LOW | fsfw\src\fsfw\storagemanager\StorageManagerIF.h | |
19 | 2800 | 0x0af0 | DEVICE_BUILDING_COMMAND_FAILED | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
20 | 2801 | 0x0af1 | DEVICE_SENDING_COMMAND_FAILED | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
21 | 2802 | 0x0af2 | DEVICE_REQUESTING_REPLY_FAILED | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
22 | 2803 | 0x0af3 | DEVICE_READING_REPLY_FAILED | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
23 | 2804 | 0x0af4 | DEVICE_INTERPRETING_REPLY_FAILED | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
24 | 2805 | 0x0af5 | DEVICE_MISSED_REPLY | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
25 | 2806 | 0x0af6 | DEVICE_UNKNOWN_REPLY | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
26 | 2807 | 0x0af7 | DEVICE_UNREQUESTED_REPLY | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
27 | 2808 | 0x0af8 | INVALID_DEVICE_COMMAND | LOW | Indicates a SW bug in child class. | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h |
28 | 2809 | 0x0af9 | MONITORING_LIMIT_EXCEEDED | LOW | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
29 | 2810 | 0x0afa | MONITORING_AMBIGUOUS | HIGH | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
30 | 2811 | 0x0afb | DEVICE_WANTS_HARD_REBOOT | HIGH | fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h | |
31 | 4201 | 0x1069 | FUSE_CURRENT_HIGH | LOW | fsfw\src\fsfw\power\Fuse.h | |
32 | 4202 | 0x106a | FUSE_WENT_OFF | LOW | fsfw\src\fsfw\power\Fuse.h | |
33 | 4204 | 0x106c | POWER_ABOVE_HIGH_LIMIT | LOW | fsfw\src\fsfw\power\Fuse.h | |
34 | 4205 | 0x106d | POWER_BELOW_LOW_LIMIT | LOW | fsfw\src\fsfw\power\Fuse.h | |
35 | 4300 | 0x10cc | SWITCH_WENT_OFF | LOW | fsfw\src\fsfw\power\PowerSwitchIF.h | |
36 | 5000 | 0x1388 | HEATER_ON | INFO | fsfw\src\fsfw\thermal\Heater.h | |
37 | 5001 | 0x1389 | HEATER_OFF | INFO | fsfw\src\fsfw\thermal\Heater.h | |
38 | 5002 | 0x138a | HEATER_TIMEOUT | LOW | fsfw\src\fsfw\thermal\Heater.h | |
39 | 5003 | 0x138b | HEATER_STAYED_ON | LOW | fsfw\src\fsfw\thermal\Heater.h | |
40 | 5004 | 0x138c | HEATER_STAYED_OFF | LOW | fsfw\src\fsfw\thermal\Heater.h | |
41 | 5200 | 0x1450 | TEMP_SENSOR_HIGH | LOW | fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h | |
42 | 5201 | 0x1451 | TEMP_SENSOR_LOW | LOW | fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h | |
43 | 5202 | 0x1452 | TEMP_SENSOR_GRADIENT | LOW | fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h | |
44 | 5901 | 0x170d | COMPONENT_TEMP_LOW | LOW | fsfw\src\fsfw\thermal\ThermalComponentIF.h | |
45 | 5902 | 0x170e | COMPONENT_TEMP_HIGH | LOW | fsfw\src\fsfw\thermal\ThermalComponentIF.h | |
46 | 5903 | 0x170f | COMPONENT_TEMP_OOL_LOW | LOW | fsfw\src\fsfw\thermal\ThermalComponentIF.h | |
47 | 5904 | 0x1710 | COMPONENT_TEMP_OOL_HIGH | LOW | fsfw\src\fsfw\thermal\ThermalComponentIF.h | |
48 | 5905 | 0x1711 | TEMP_NOT_IN_OP_RANGE | LOW | fsfw\src\fsfw\thermal\ThermalComponentIF.h | |
49 | 7101 | 0x1bbd | FDIR_CHANGED_STATE | INFO | fsfw\src\fsfw\fdir\FailureIsolationBase.h | |
50 | 7102 | 0x1bbe | FDIR_STARTS_RECOVERY | MEDIUM | fsfw\src\fsfw\fdir\FailureIsolationBase.h | |
51 | 7103 | 0x1bbf | FDIR_TURNS_OFF_DEVICE | MEDIUM | fsfw\src\fsfw\fdir\FailureIsolationBase.h | |
52 | 7201 | 0x1c21 | MONITOR_CHANGED_STATE | LOW | fsfw\src\fsfw\monitoring\MonitoringIF.h | |
53 | 7202 | 0x1c22 | VALUE_BELOW_LOW_LIMIT | LOW | fsfw\src\fsfw\monitoring\MonitoringIF.h | |
54 | 7203 | 0x1c23 | VALUE_ABOVE_HIGH_LIMIT | LOW | fsfw\src\fsfw\monitoring\MonitoringIF.h | |
55 | 7204 | 0x1c24 | VALUE_OUT_OF_RANGE | LOW | fsfw\src\fsfw\monitoring\MonitoringIF.h | |
56 | 7400 | 0x1ce8 | CHANGING_MODE | INFO | fsfw\src\fsfw\modes\HasModesIF.h | |
57 | 7401 | 0x1ce9 | MODE_INFO | INFO | fsfw\src\fsfw\modes\HasModesIF.h | |
58 | 7402 | 0x1cea | FALLBACK_FAILED | HIGH | fsfw\src\fsfw\modes\HasModesIF.h | |
59 | 7403 | 0x1ceb | MODE_TRANSITION_FAILED | LOW | fsfw\src\fsfw\modes\HasModesIF.h | |
60 | 7404 | 0x1cec | CANT_KEEP_MODE | HIGH | fsfw\src\fsfw\modes\HasModesIF.h | |
61 | 7405 | 0x1ced | OBJECT_IN_INVALID_MODE | LOW | fsfw\src\fsfw\modes\HasModesIF.h | |
62 | 7406 | 0x1cee | FORCING_MODE | MEDIUM | fsfw\src\fsfw\modes\HasModesIF.h | |
63 | 7407 | 0x1cef | MODE_CMD_REJECTED | LOW | fsfw\src\fsfw\modes\HasModesIF.h | |
64 | 7506 | 0x1d52 | HEALTH_INFO | INFO | fsfw\src\fsfw\health\HasHealthIF.h | |
65 | 7507 | 0x1d53 | CHILD_CHANGED_HEALTH | INFO | fsfw\src\fsfw\health\HasHealthIF.h | |
66 | 7508 | 0x1d54 | CHILD_PROBLEMS | LOW | fsfw\src\fsfw\health\HasHealthIF.h | |
67 | 7509 | 0x1d55 | OVERWRITING_HEALTH | LOW | fsfw\src\fsfw\health\HasHealthIF.h | |
68 | 7510 | 0x1d56 | TRYING_RECOVERY | MEDIUM | fsfw\src\fsfw\health\HasHealthIF.h | |
69 | 7511 | 0x1d57 | RECOVERY_STEP | MEDIUM | fsfw\src\fsfw\health\HasHealthIF.h | |
70 | 7512 | 0x1d58 | RECOVERY_DONE | MEDIUM | fsfw\src\fsfw\health\HasHealthIF.h | |
71 | 7900 | 0x1edc | RF_AVAILABLE | INFO | A RF available signal was detected. P1: raw RFA state, P2: 0 | fsfw\src\fsfw\datalinklayer\DataLinkLayer.h |
72 | 7901 | 0x1edd | RF_LOST | INFO | A previously found RF available signal was lost. P1: raw RFA state, P2: 0 | fsfw\src\fsfw\datalinklayer\DataLinkLayer.h |
73 | 7902 | 0x1ede | BIT_LOCK | INFO | A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0 | fsfw\src\fsfw\datalinklayer\DataLinkLayer.h |
74 | 7903 | 0x1edf | BIT_LOCK_LOST | INFO | A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0 | fsfw\src\fsfw\datalinklayer\DataLinkLayer.h |
75 | 7905 | 0x1ee1 | FRAME_PROCESSING_FAILED | LOW | The CCSDS Board could not interpret a TC | fsfw\src\fsfw\datalinklayer\DataLinkLayer.h |
76 | 8900 | 0x22c4 | CLOCK_SET | INFO | fsfw\src\fsfw\pus\Service9TimeManagement.h | |
77 | 8901 | 0x22c5 | CLOCK_SET_FAILURE | LOW | fsfw\src\fsfw\pus\Service9TimeManagement.h | |
78 | 9700 | 0x25e4 | TEST | INFO | fsfw\src\fsfw\pus\Service17Test.h | |
79 | 10600 | 0x2968 | CHANGE_OF_SETUP_PARAMETER | LOW | fsfw\hal\src\fsfw_hal\devicehandlers\MgmLIS3MDLHandler.h | |
80 | 10800 | 0x2a30 | SWITCH_CMD_SENT | INFO | Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index | mission\devices\devicedefinitions\powerDefinitions.h |
81 | 10801 | 0x2a31 | SWITCH_HAS_CHANGED | INFO | Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index | mission\devices\devicedefinitions\powerDefinitions.h |
82 | 10802 | 0x2a32 | SWITCHING_Q7S_DENIED | MEDIUM | mission\devices\devicedefinitions\powerDefinitions.h | |
83 | 10900 | 0x2a94 | GPIO_PULL_HIGH_FAILED | LOW | mission\devices\HeaterHandler.h | |
84 | 10901 | 0x2a95 | GPIO_PULL_LOW_FAILED | LOW | mission\devices\HeaterHandler.h | |
85 | 10902 | 0x2a96 | SWITCH_ALREADY_ON | LOW | mission\devices\HeaterHandler.h | |
86 | 10903 | 0x2a97 | SWITCH_ALREADY_OFF | LOW | mission\devices\HeaterHandler.h | |
87 | 10904 | 0x2a98 | MAIN_SWITCH_TIMEOUT | LOW | mission\devices\HeaterHandler.h | |
88 | 11000 | 0x2af8 | MAIN_SWITCH_ON_TIMEOUT | LOW | mission\devices\SolarArrayDeploymentHandler.h | |
89 | 11001 | 0x2af9 | MAIN_SWITCH_OFF_TIMEOUT | LOW | mission\devices\SolarArrayDeploymentHandler.h | |
90 | 11002 | 0x2afa | DEPLOYMENT_FAILED | HIGH | mission\devices\SolarArrayDeploymentHandler.h | |
91 | 11003 | 0x2afb | DEPL_SA1_GPIO_SWTICH_ON_FAILED | HIGH | mission\devices\SolarArrayDeploymentHandler.h | |
92 | 11004 | 0x2afc | DEPL_SA2_GPIO_SWTICH_ON_FAILED | HIGH | mission\devices\SolarArrayDeploymentHandler.h | |
93 | 11101 | 0x2b5d | MEMORY_READ_RPT_CRC_FAILURE | LOW | PLOC crc failure in telemetry packet | linux\devices\ploc\PlocMPSoCHandler.h |
94 | 11102 | 0x2b5e | ACK_FAILURE | LOW | PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field | linux\devices\ploc\PlocMPSoCHandler.h |
95 | 11103 | 0x2b5f | EXE_FAILURE | LOW | PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field | linux\devices\ploc\PlocMPSoCHandler.h |
96 | 11104 | 0x2b60 | MPSOC_HANDLER_CRC_FAILURE | LOW | PLOC reply has invalid crc | linux\devices\ploc\PlocMPSoCHandler.h |
97 | 11105 | 0x2b61 | MPSOC_HANDLER_SEQ_CNT_MISMATCH | LOW | Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count | linux\devices\ploc\PlocMPSoCHandler.h |
98 | 11106 | 0x2b62 | MPSOC_SHUTDOWN_FAILED | HIGH | Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor. | linux\devices\ploc\PlocMPSoCHandler.h |
99 | 11201 | 0x2bc1 | SELF_TEST_I2C_FAILURE | LOW | Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA | mission\devices\IMTQHandler.h |
100 | 11202 | 0x2bc2 | SELF_TEST_SPI_FAILURE | LOW | Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA | mission\devices\IMTQHandler.h |
101 | 11203 | 0x2bc3 | SELF_TEST_ADC_FAILURE | LOW | Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA | mission\devices\IMTQHandler.h |
102 | 11204 | 0x2bc4 | SELF_TEST_PWM_FAILURE | LOW | Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA | mission\devices\IMTQHandler.h |
103 | 11205 | 0x2bc5 | SELF_TEST_TC_FAILURE | LOW | Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA | mission\devices\IMTQHandler.h |
104 | 11206 | 0x2bc6 | SELF_TEST_MTM_RANGE_FAILURE | LOW | Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA | mission\devices\IMTQHandler.h |
105 | 11207 | 0x2bc7 | SELF_TEST_COIL_CURRENT_FAILURE | LOW | Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA | mission\devices\IMTQHandler.h |
106 | 11208 | 0x2bc8 | INVALID_ERROR_BYTE | LOW | Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC. | mission\devices\IMTQHandler.h |
107 | 11301 | 0x2c25 | ERROR_STATE | HIGH | Reaction wheel signals an error state | mission\devices\RwHandler.h |
108 | 11401 | 0x2c89 | BOOTING_FIRMWARE_FAILED | LOW | Failed to boot firmware | linux\devices\startracker\StarTrackerHandler.h |
109 | 11402 | 0x2c8a | BOOTING_BOOTLOADER_FAILED | LOW | Failed to boot star tracker into bootloader mode | linux\devices\startracker\StarTrackerHandler.h |
110 | 11501 | 0x2ced | SUPV_MEMORY_READ_RPT_CRC_FAILURE | LOW | PLOC supervisor crc failure in telemetry packet | linux\devices\ploc\PlocSupervisorHandler.h |
111 | 11502 | 0x2cee | SUPV_ACK_FAILURE | LOW | PLOC supervisor received acknowledgment failure report | linux\devices\ploc\PlocSupervisorHandler.h |
112 | 11503 | 0x2cef | SUPV_EXE_FAILURE | LOW | PLOC received execution failure report | linux\devices\ploc\PlocSupervisorHandler.h |
113 | 11504 | 0x2cf0 | SUPV_CRC_FAILURE_EVENT | LOW | PLOC supervisor reply has invalid crc | linux\devices\ploc\PlocSupervisorHandler.h |
114 | 11505 | 0x2cf1 | SUPV_HELPER_EXECUTING | LOW | Supervisor helper currently executing a command | linux\devices\ploc\PlocSupervisorHandler.h |
115 | 11600 | 0x2d50 | SANITIZATION_FAILED | LOW | bsp_q7s\memory\SdCardManager.h | |
116 | 11601 | 0x2d51 | MOUNTED_SD_CARD | INFO | bsp_q7s\memory\SdCardManager.h | |
117 | 11800 | 0x2e18 | SEND_MRAM_DUMP_FAILED | LOW | Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command | linux\devices\ploc\PlocMemoryDumper.h |
118 | 11801 | 0x2e19 | MRAM_DUMP_FAILED | LOW | Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command | linux\devices\ploc\PlocMemoryDumper.h |
119 | 11802 | 0x2e1a | MRAM_DUMP_FINISHED | LOW | MRAM dump finished successfully | linux\devices\ploc\PlocMemoryDumper.h |
120 | 11901 | 0x2e7d | INVALID_TC_FRAME | HIGH | linux\obc\PdecHandler.h | |
121 | 11902 | 0x2e7e | INVALID_FAR | HIGH | Read invalid FAR from PDEC after startup | linux\obc\PdecHandler.h |
122 | 11903 | 0x2e7f | CARRIER_LOCK | INFO | Carrier lock detected | linux\obc\PdecHandler.h |
123 | 11904 | 0x2e80 | BIT_LOCK_PDEC | INFO | Bit lock detected (data valid) | linux\obc\PdecHandler.h |
124 | 12000 | 0x2ee0 | IMAGE_UPLOAD_FAILED | LOW | Image upload failed | linux\devices\startracker\StrHelper.h |
125 | 12001 | 0x2ee1 | IMAGE_DOWNLOAD_FAILED | LOW | Image download failed | linux\devices\startracker\StrHelper.h |
126 | 12002 | 0x2ee2 | IMAGE_UPLOAD_SUCCESSFUL | LOW | Uploading image to star tracker was successfulop | linux\devices\startracker\StrHelper.h |
127 | 12003 | 0x2ee3 | IMAGE_DOWNLOAD_SUCCESSFUL | LOW | Image download was successful | linux\devices\startracker\StrHelper.h |
128 | 12004 | 0x2ee4 | FLASH_WRITE_SUCCESSFUL | LOW | Finished flash write procedure successfully | linux\devices\startracker\StrHelper.h |
129 | 12005 | 0x2ee5 | FLASH_READ_SUCCESSFUL | LOW | Finished flash read procedure successfully | linux\devices\startracker\StrHelper.h |
130 | 12006 | 0x2ee6 | FLASH_READ_FAILED | LOW | Flash read procedure failed | linux\devices\startracker\StrHelper.h |
131 | 12007 | 0x2ee7 | FIRMWARE_UPDATE_SUCCESSFUL | LOW | Firmware update was successful | linux\devices\startracker\StrHelper.h |
132 | 12008 | 0x2ee8 | FIRMWARE_UPDATE_FAILED | LOW | Firmware update failed | linux\devices\startracker\StrHelper.h |
133 | 12009 | 0x2ee9 | STR_HELPER_READING_REPLY_FAILED | LOW | Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed | linux\devices\startracker\StrHelper.h |
134 | 12010 | 0x2eea | STR_HELPER_COM_ERROR | LOW | Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed | linux\devices\startracker\StrHelper.h |
135 | 12011 | 0x2eeb | STR_HELPER_NO_REPLY | LOW | Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent | linux\devices\startracker\StrHelper.h |
136 | 12012 | 0x2eec | STR_HELPER_DEC_ERROR | LOW | Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request | linux\devices\startracker\StrHelper.h |
137 | 12013 | 0x2eed | POSITION_MISMATCH | LOW | Position mismatch P1: The expected position and thus the position for which the image upload/download failed | linux\devices\startracker\StrHelper.h |
138 | 12014 | 0x2eee | STR_HELPER_FILE_NOT_EXISTS | LOW | Specified file does not exist P1: Internal state of str helper | linux\devices\startracker\StrHelper.h |
139 | 12015 | 0x2eef | STR_HELPER_SENDING_PACKET_FAILED | LOW | linux\devices\startracker\StrHelper.h | |
140 | 12016 | 0x2ef0 | STR_HELPER_REQUESTING_MSG_FAILED | LOW | linux\devices\startracker\StrHelper.h | |
141 | 12100 | 0x2f44 | SUPV_UPDATE_FAILED | LOW | update failed | linux\devices\ploc\PlocSupvHelper.h |
142 | 12101 | 0x2f45 | SUPV_UPDATE_SUCCESSFUL | LOW | update successful | linux\devices\ploc\PlocSupvHelper.h |
143 | 12102 | 0x2f46 | TERMINATED_UPDATE_PROCEDURE | LOW | Terminated update procedure by command | linux\devices\ploc\PlocSupvHelper.h |
144 | 12103 | 0x2f47 | SUPV_SENDING_COMMAND_FAILED | LOW | linux\devices\ploc\PlocSupvHelper.h | |
145 | 12104 | 0x2f48 | SUPV_HELPER_REQUESTING_REPLY_FAILED | LOW | Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper | linux\devices\ploc\PlocSupvHelper.h |
146 | 12105 | 0x2f49 | SUPV_HELPER_READING_REPLY_FAILED | LOW | Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper | linux\devices\ploc\PlocSupvHelper.h |
147 | 12106 | 0x2f4a | SUPV_MISSING_ACK | LOW | Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper | linux\devices\ploc\PlocSupvHelper.h |
148 | 12107 | 0x2f4b | SUPV_MISSING_EXE | LOW | Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper | linux\devices\ploc\PlocSupvHelper.h |
149 | 12108 | 0x2f4c | SUPV_ACK_FAILURE_REPORT | LOW | Supervisor received acknowledgment failure report P1: Internal state of supervisor helper | linux\devices\ploc\PlocSupvHelper.h |
150 | 12109 | 0x2f4d | SUPV_EXE_FAILURE_REPORT | LOW | Supervisor received execution failure report P1: Internal state of supervisor | linux\devices\ploc\PlocSupvHelper.h |
151 | 12110 | 0x2f4e | SUPV_ACK_INVALID_APID | LOW | Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper | linux\devices\ploc\PlocSupvHelper.h |
152 | 12111 | 0x2f4f | SUPV_EXE_INVALID_APID | LOW | Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper | linux\devices\ploc\PlocSupvHelper.h |
153 | 12200 | 0x2fa8 | TRANSITION_BACK_TO_OFF | MEDIUM | Could not transition properly and went back to ALL OFF | mission\devices\PayloadPcduHandler.h |
154 | 12201 | 0x2fa9 | NEG_V_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
155 | 12202 | 0x2faa | U_DRO_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
156 | 12203 | 0x2fab | I_DRO_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
157 | 12204 | 0x2fac | U_X8_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
158 | 12205 | 0x2fad | I_X8_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
159 | 12206 | 0x2fae | U_TX_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
160 | 12207 | 0x2faf | I_TX_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
161 | 12208 | 0x2fb0 | U_MPA_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
162 | 12209 | 0x2fb1 | I_MPA_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
163 | 12210 | 0x2fb2 | U_HPA_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
164 | 12211 | 0x2fb3 | I_HPA_OUT_OF_BOUNDS | MEDIUM | P1: 0 -> too low, 1 -> too high P2: Float value | mission\devices\PayloadPcduHandler.h |
165 | 12300 | 0x300c | TRANSITION_OTHER_SIDE_FAILED | HIGH | mission\system\AcsBoardAssembly.h | |
166 | 12301 | 0x300d | NOT_ENOUGH_DEVICES_DUAL_MODE | HIGH | mission\system\AcsBoardAssembly.h | |
167 | 12302 | 0x300e | POWER_STATE_MACHINE_TIMEOUT | MEDIUM | mission\system\AcsBoardAssembly.h | |
168 | 12303 | 0x300f | SIDE_SWITCH_TRANSITION_NOT_ALLOWED | LOW | Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination | mission\system\AcsBoardAssembly.h |
169 | 12400 | 0x3070 | TRANSITION_OTHER_SIDE_FAILED | HIGH | mission\system\SusAssembly.h | |
170 | 12401 | 0x3071 | NOT_ENOUGH_DEVICES_DUAL_MODE | HIGH | mission\system\SusAssembly.h | |
171 | 12402 | 0x3072 | POWER_STATE_MACHINE_TIMEOUT | MEDIUM | mission\system\SusAssembly.h | |
172 | 12403 | 0x3073 | SIDE_SWITCH_TRANSITION_NOT_ALLOWED | LOW | Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination | mission\system\SusAssembly.h |
173 | 12500 | 0x30d4 | CHILDREN_LOST_MODE | MEDIUM | mission\system\TcsBoardAssembly.h | |
174 | 13600 | 0x3520 | ALLOC_FAILURE | MEDIUM | bsp_q7s\core\CoreController.h | |
175 | 13601 | 0x3521 | REBOOT_SW | MEDIUM | Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy | bsp_q7s\core\CoreController.h |
176 | 13602 | 0x3522 | REBOOT_MECHANISM_TRIGGERED | MEDIUM | The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots | bsp_q7s\core\CoreController.h |
177 | 13603 | 0x3523 | REBOOT_HW | MEDIUM | bsp_q7s\core\CoreController.h |