Timing Problem dummy solution

main.cpp

@@ -11,8 +11,8 @@
 #include "arduino_core/ArduinoCore-avr/libraries/SPI/src/SPI.h"
 
 //Define which port to use for the SPI Chip Select
-#define CS_PORT PORTC
-#define CS_DDR DDRC
+#define CS_PORT PORTB
+#define CS_DDR DDRB
 
 #define RING_BUFFER_SIZE 100
 #define MAX_PACKET_LENGTH 100
@@ -43,15 +43,26 @@ void sendData(uint8_t *data, size_t len) {
 	if (result != HasReturnvaluesIF::RETURN_OK) {
 		return;
 	}
+
 	Serial.write(buffer, writtenLen);
 }
 
 void transferSPI(uint8_t address, uint8_t *data, size_t datalen) {
-	SPI.beginTransaction(SPISettings(14000000, MSBFIRST, SPI_MODE3));
-	CS_PORT = ~address;
-	SPI.transfer(data, datalen);
+	SPI.beginTransaction(SPISettings(100000, MSBFIRST, SPI_MODE3));
+	//CS_PORT = ~address;
+	digitalWrite(10, LOW);
+	//included
+    for (size_t i = 0; i < datalen; i++)
+    {
+    	//Serial.print("SentData is: ");Serial.println(data[i]);
+        data[i] = SPI.transfer(data[i]);
+        //Serial.print("Back from n-1 ");Serial.println(data[i]);
+
+    }
+	//SPI.transfer(data, datalen);
 	delay(100);
-	CS_PORT = 0xff;
+	digitalWrite(10, HIGH);
+	//CS_PORT = 0xff;
 	SPI.endTransaction();
 
 }
@@ -67,14 +78,14 @@ void handlePacket(uint8_t *packet, size_t packetLen) {
 
 
 	if (crc != 0) {
-		Serial.println("invalid Checksum");
+		//Serial.println("invalid Checksum");
 		return;
 	}
 
 	uint16_t payloadLen = (packet[2] << 8) | packet[3];
 
 	if (payloadLen != packetLen - 6) {
-		Serial.println("invalid len");
+		//Serial.println("invalid len");
 		return;
 	}
 
@@ -89,14 +100,11 @@ void handlePacket(uint8_t *packet, size_t packetLen) {
 		//echo the data back, no need to change the header fields, they are the same
 		//checksum will be written by sendData()
 		//check reply:
-		Serial.println("Data response check: ");
-		for(size_t i =0; i< packetLen; i++){
-			Serial.print("packet nr ");Serial.print(i);Serial.print(" ");Serial.println(packet[i]);
-		}
+
 		sendData(packet, packetLen);
 		break;
 	default:
-		Serial.println("invalid command");
+		//Serial.println("invalid command");
 		break;
 	}
 
@@ -113,13 +121,13 @@ void handleNewData() {
 	size_t firstSTXinRawData = 0;
 	while ((firstSTXinRawData < rawDataSize)
 			&& (rawData[firstSTXinRawData] != DleEncoder::STX)) {
-		Serial.println(rawData[firstSTXinRawData]);
+		//Serial.println(rawData[firstSTXinRawData]);
 		firstSTXinRawData++;
 	}
 
 	if (rawData[firstSTXinRawData] != DleEncoder::STX) {
 		//there is no STX in our data, throw it away...
-		Serial.println("NO STX");
+		//Serial.println("NO STX");
 		ringBuffer.deleteData(rawDataSize);
 		return;
 	}
@@ -159,10 +167,17 @@ void serialEvent() {
 }
 
 void setup() {
-	CS_DDR = 0xff;
-	CS_PORT = 0xff;
+	//CS_DDR = 0xff;
+	//CS_PORT = 0xff;
+
+	//CS_DDR |= (1<<);
+	//CS_PORT |= (1<<PB2);
 	Serial.begin(9600);
-	SPI.begin();
+	pinMode(MOSI, OUTPUT);
+	pinMode(SCK, OUTPUT);
+	pinMode(MISO, INPUT);
+	pinMode(10, OUTPUT);
+	digitalWrite(10,HIGH);
 }
 
 void loop() {