device handler uses local pools now
This commit is contained in:
parent
faedd40665
commit
5e2e18ac07
|
|
@ -3,8 +3,6 @@
|
|||
#include "DeviceTmReportingWrapper.h"
|
||||
|
||||
#include "../serviceinterface/ServiceInterfaceStream.h"
|
||||
#include "../datapoolglob/GlobalDataSet.h"
|
||||
#include "../datapoolglob/GlobalPoolVariable.h"
|
||||
#include "../objectmanager/ObjectManager.h"
|
||||
#include "../storagemanager/StorageManagerIF.h"
|
||||
#include "../thermal/ThermalComponentIF.h"
|
||||
|
|
@ -13,9 +11,11 @@
|
|||
#include "../ipc/MessageQueueMessage.h"
|
||||
#include "../ipc/QueueFactory.h"
|
||||
#include "../subsystem/SubsystemBase.h"
|
||||
#include "../datapoollocal/LocalPoolVariable.h"
|
||||
|
||||
#include <iomanip>
|
||||
|
||||
|
||||
object_id_t DeviceHandlerBase::powerSwitcherId = objects::NO_OBJECT;
|
||||
object_id_t DeviceHandlerBase::rawDataReceiverId = objects::NO_OBJECT;
|
||||
object_id_t DeviceHandlerBase::defaultFdirParentId = objects::NO_OBJECT;
|
||||
|
|
@ -56,9 +56,10 @@ void DeviceHandlerBase::setHkDestination(object_id_t hkDestination) {
|
|||
}
|
||||
|
||||
void DeviceHandlerBase::setThermalStateRequestPoolIds(
|
||||
uint32_t thermalStatePoolId, uint32_t thermalRequestPoolId) {
|
||||
this->deviceThermalRequestPoolId = thermalStatePoolId;
|
||||
this->deviceThermalRequestPoolId = thermalRequestPoolId;
|
||||
lp_id_t thermalStatePoolId, lp_id_t heaterRequestPoolId,
|
||||
uint32_t thermalSetId) {
|
||||
thermalSet = new DeviceHandlerThermalSet(this, thermalSetId,
|
||||
thermalStatePoolId, heaterRequestPoolId);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -86,7 +87,6 @@ ReturnValue_t DeviceHandlerBase::performOperation(uint8_t counter) {
|
|||
decrementDeviceReplyMap();
|
||||
fdirInstance->checkForFailures();
|
||||
hkSwitcher.performOperation();
|
||||
hkManager.performHkOperation();
|
||||
performOperationHook();
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
|
@ -111,6 +111,9 @@ ReturnValue_t DeviceHandlerBase::performOperation(uint8_t counter) {
|
|||
break;
|
||||
case CommunicationAction::GET_READ:
|
||||
doGetRead();
|
||||
// This will be performed after datasets have been updated by the
|
||||
// custom device implementation.
|
||||
hkManager.performHkOperation();
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
|
|
@ -208,16 +211,18 @@ ReturnValue_t DeviceHandlerBase::initialize() {
|
|||
|
||||
fillCommandAndReplyMap();
|
||||
|
||||
//Set temperature target state to NON_OP.
|
||||
GlobDataSet mySet;
|
||||
gp_uint8_t thermalRequest(deviceThermalRequestPoolId, &mySet,
|
||||
PoolVariableIF::VAR_WRITE);
|
||||
mySet.read();
|
||||
thermalRequest = ThermalComponentIF::STATE_REQUEST_NON_OPERATIONAL;
|
||||
mySet.commit(PoolVariableIF::VALID);
|
||||
if(thermalSet != nullptr) {
|
||||
//Set temperature target state to NON_OP.
|
||||
result = thermalSet->read();
|
||||
if(result == HasReturnvaluesIF::RETURN_OK) {
|
||||
thermalSet->heaterRequest.value =
|
||||
ThermalComponentIF::STATE_REQUEST_NON_OPERATIONAL;
|
||||
thermalSet->commit(PoolVariableIF::VALID);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
return RETURN_OK;
|
||||
|
||||
}
|
||||
|
||||
void DeviceHandlerBase::decrementDeviceReplyMap() {
|
||||
|
|
@ -505,15 +510,17 @@ void DeviceHandlerBase::setMode(Mode_t newMode, uint8_t newSubmode) {
|
|||
}
|
||||
Clock::getUptime(&timeoutStart);
|
||||
|
||||
if (mode == MODE_OFF) {
|
||||
GlobDataSet mySet;
|
||||
gp_uint8_t thermalRequest(deviceThermalRequestPoolId, &mySet,
|
||||
PoolVariableIF::VAR_READ_WRITE);
|
||||
mySet.read();
|
||||
if (thermalRequest != ThermalComponentIF::STATE_REQUEST_IGNORE) {
|
||||
thermalRequest = ThermalComponentIF::STATE_REQUEST_NON_OPERATIONAL;
|
||||
if (mode == MODE_OFF and thermalSet != nullptr) {
|
||||
ReturnValue_t result = thermalSet->read();
|
||||
if(result == HasReturnvaluesIF::RETURN_OK) {
|
||||
if (thermalSet->heaterRequest.value !=
|
||||
ThermalComponentIF::STATE_REQUEST_IGNORE) {
|
||||
thermalSet->heaterRequest.value = ThermalComponentIF::
|
||||
STATE_REQUEST_NON_OPERATIONAL;
|
||||
}
|
||||
thermalSet->heaterRequest.commit(PoolVariableIF::VALID);
|
||||
}
|
||||
mySet.commit(PoolVariableIF::VALID);
|
||||
|
||||
}
|
||||
changeHK(mode, submode, true);
|
||||
}
|
||||
|
|
@ -976,17 +983,15 @@ ReturnValue_t DeviceHandlerBase::checkModeCommand(Mode_t commandedMode,
|
|||
}
|
||||
|
||||
if ((commandedMode == MODE_ON) && (mode == MODE_OFF)
|
||||
&& (deviceThermalStatePoolId != PoolVariableIF::NO_PARAMETER)) {
|
||||
GlobDataSet mySet;
|
||||
gp_uint8_t thermalState(deviceThermalStatePoolId, &mySet,
|
||||
PoolVariableIF::VAR_READ);
|
||||
gp_uint8_t thermalRequest(deviceThermalRequestPoolId, &mySet,
|
||||
PoolVariableIF::VAR_READ);
|
||||
mySet.read();
|
||||
if (thermalRequest != ThermalComponentIF::STATE_REQUEST_IGNORE) {
|
||||
if (!ThermalComponentIF::isOperational(thermalState)) {
|
||||
and (thermalSet != nullptr)) {
|
||||
ReturnValue_t result = thermalSet->read();
|
||||
if(result == HasReturnvaluesIF::RETURN_OK) {
|
||||
if((thermalSet->heaterRequest.value !=
|
||||
ThermalComponentIF::STATE_REQUEST_IGNORE) and (not
|
||||
ThermalComponentIF::isOperational(
|
||||
thermalSet->thermalState.value))) {
|
||||
triggerEvent(ThermalComponentIF::TEMP_NOT_IN_OP_RANGE,
|
||||
thermalState);
|
||||
thermalSet->thermalState.value);
|
||||
return NON_OP_TEMPERATURE;
|
||||
}
|
||||
}
|
||||
|
|
@ -999,32 +1004,15 @@ void DeviceHandlerBase::startTransition(Mode_t commandedMode,
|
|||
Submode_t commandedSubmode) {
|
||||
switch (commandedMode) {
|
||||
case MODE_ON:
|
||||
if (mode == MODE_OFF) {
|
||||
transitionSourceMode = _MODE_POWER_DOWN;
|
||||
transitionSourceSubMode = SUBMODE_NONE;
|
||||
setMode(_MODE_POWER_ON, commandedSubmode);
|
||||
//already set the delay for the child transition so we don't need to call it twice
|
||||
childTransitionDelay = getTransitionDelayMs(_MODE_START_UP,
|
||||
MODE_ON);
|
||||
triggerEvent(CHANGING_MODE, commandedMode, commandedSubmode);
|
||||
GlobDataSet mySet;
|
||||
gp_int8_t thermalRequest(deviceThermalRequestPoolId,
|
||||
&mySet, PoolVariableIF::VAR_READ_WRITE);
|
||||
mySet.read();
|
||||
if (thermalRequest != ThermalComponentIF::STATE_REQUEST_IGNORE) {
|
||||
thermalRequest = ThermalComponentIF::STATE_REQUEST_OPERATIONAL;
|
||||
mySet.commit(PoolVariableIF::VALID);
|
||||
}
|
||||
} else {
|
||||
setTransition(MODE_ON, commandedSubmode);
|
||||
}
|
||||
handleTransitionToOnMode(commandedMode, commandedSubmode);
|
||||
break;
|
||||
case MODE_OFF:
|
||||
if (mode == MODE_OFF) {
|
||||
triggerEvent(CHANGING_MODE, commandedMode, commandedSubmode);
|
||||
setMode(_MODE_POWER_DOWN, commandedSubmode);
|
||||
} else {
|
||||
//already set the delay for the child transition so we don't need to call it twice
|
||||
// already set the delay for the child transition
|
||||
// so we don't need to call it twice
|
||||
childTransitionDelay = getTransitionDelayMs(mode, _MODE_POWER_DOWN);
|
||||
transitionSourceMode = _MODE_POWER_DOWN;
|
||||
transitionSourceSubMode = commandedSubmode;
|
||||
|
|
@ -1050,6 +1038,33 @@ void DeviceHandlerBase::startTransition(Mode_t commandedMode,
|
|||
}
|
||||
}
|
||||
|
||||
void DeviceHandlerBase::handleTransitionToOnMode(Mode_t commandedMode,
|
||||
Submode_t commandedSubmode) {
|
||||
if (mode == MODE_OFF) {
|
||||
transitionSourceMode = _MODE_POWER_DOWN;
|
||||
transitionSourceSubMode = SUBMODE_NONE;
|
||||
setMode(_MODE_POWER_ON, commandedSubmode);
|
||||
// already set the delay for the child transition so we don't
|
||||
// need to call it twice
|
||||
childTransitionDelay = getTransitionDelayMs(_MODE_START_UP,
|
||||
MODE_ON);
|
||||
triggerEvent(CHANGING_MODE, commandedMode, commandedSubmode);
|
||||
if(thermalSet != nullptr) {
|
||||
ReturnValue_t result = thermalSet->read();
|
||||
if(result == HasReturnvaluesIF::RETURN_OK) {
|
||||
if(thermalSet->heaterRequest !=
|
||||
ThermalComponentIF::STATE_REQUEST_IGNORE) {
|
||||
thermalSet->heaterRequest =
|
||||
ThermalComponentIF::STATE_REQUEST_OPERATIONAL;
|
||||
thermalSet->commit();
|
||||
}
|
||||
}
|
||||
}
|
||||
} else {
|
||||
setTransition(MODE_ON, commandedSubmode);
|
||||
}
|
||||
}
|
||||
|
||||
void DeviceHandlerBase::getMode(Mode_t* mode, Submode_t* submode) {
|
||||
*mode = this->mode;
|
||||
*submode = this->submode;
|
||||
|
|
@ -1222,10 +1237,12 @@ void DeviceHandlerBase::handleDeviceTM(SerializeIF* data,
|
|||
}
|
||||
}
|
||||
//Try to cast to GlobDataSet and commit data.
|
||||
if (!neverInDataPool) {
|
||||
GlobDataSet* dataSet = dynamic_cast<GlobDataSet*>(data);
|
||||
if (dataSet != NULL) {
|
||||
dataSet->commit(PoolVariableIF::VALID);
|
||||
if (not neverInDataPool) {
|
||||
LocalPoolDataSetBase* dataSet =
|
||||
dynamic_cast<LocalPoolDataSetBase*>(data);
|
||||
if (dataSet != nullptr) {
|
||||
dataSet->setValidity(true, true);
|
||||
dataSet->commit();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1262,7 +1279,8 @@ void DeviceHandlerBase::buildInternalCommand(void) {
|
|||
if (result == BUSY) {
|
||||
//so we can track misconfigurations
|
||||
sif::debug << std::hex << getObjectId()
|
||||
<< ": DHB::buildInternalCommand: Busy" << std::dec << std::endl;
|
||||
<< ": DHB::buildInternalCommand: Busy" << std::dec
|
||||
<< std::endl;
|
||||
result = NOTHING_TO_SEND; //no need to report this
|
||||
}
|
||||
}
|
||||
|
|
@ -1371,8 +1389,8 @@ bool DeviceHandlerBase::commandIsExecuting(DeviceCommandId_t commandId) {
|
|||
void DeviceHandlerBase::changeHK(Mode_t mode, Submode_t submode, bool enable) {
|
||||
}
|
||||
|
||||
void DeviceHandlerBase::setTaskIF(PeriodicTaskIF* task_){
|
||||
executingTask = task_;
|
||||
void DeviceHandlerBase::setTaskIF(PeriodicTaskIF* task){
|
||||
executingTask = task;
|
||||
}
|
||||
|
||||
// Default implementations empty.
|
||||
|
|
@ -1385,6 +1403,12 @@ void DeviceHandlerBase::performOperationHook() {
|
|||
ReturnValue_t DeviceHandlerBase::initializeLocalDataPool(
|
||||
LocalDataPool &localDataPoolMap,
|
||||
LocalDataPoolManager& poolManager) {
|
||||
if(thermalSet != nullptr) {
|
||||
localDataPoolMap.emplace(thermalSet->thermalStatePoolId,
|
||||
new PoolEntry<DeviceHandlerIF::dh_thermal_state_t>);
|
||||
localDataPoolMap.emplace(thermalSet->heaterRequestPoolId,
|
||||
new PoolEntry<DeviceHandlerIF::dh_heater_request_t>);
|
||||
}
|
||||
return RETURN_OK;
|
||||
}
|
||||
|
||||
|
|
@ -1429,3 +1453,9 @@ dur_millis_t DeviceHandlerBase::getPeriodicOperationFrequency() const {
|
|||
return pstIntervalMs;
|
||||
}
|
||||
|
||||
DeviceCommandId_t DeviceHandlerBase::getPendingCommand() const {
|
||||
if(cookieInfo.pendingCommand != deviceCommandMap.end()) {
|
||||
return cookieInfo.pendingCommand->first;
|
||||
}
|
||||
return DeviceHandlerIF::NO_COMMAND;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
#include "DeviceHandlerIF.h"
|
||||
#include "DeviceCommunicationIF.h"
|
||||
#include "DeviceHandlerFailureIsolation.h"
|
||||
#include "DeviceHandlerThermalSet.h"
|
||||
|
||||
#include "../objectmanager/SystemObject.h"
|
||||
#include "../tasks/ExecutableObjectIF.h"
|
||||
|
|
@ -103,8 +104,21 @@ public:
|
|||
size_t cmdQueueSize = 20);
|
||||
|
||||
void setHkDestination(object_id_t hkDestination);
|
||||
void setThermalStateRequestPoolIds(uint32_t thermalStatePoolId,
|
||||
uint32_t thermalRequestPoolId);
|
||||
|
||||
/**
|
||||
* If the device handler is controlled by the FSFW thermal building blocks,
|
||||
* this function should be called to initialize all required components.
|
||||
* The device handler will then take care of creating local pool entries
|
||||
* for the device thermal state and device heating request.
|
||||
* Custom local pool IDs can be assigned as well.
|
||||
* @param thermalStatePoolId
|
||||
* @param thermalRequestPoolId
|
||||
*/
|
||||
void setThermalStateRequestPoolIds(lp_id_t thermalStatePoolId =
|
||||
DeviceHandlerIF::DEFAULT_THERMAL_STATE_POOL_ID,
|
||||
lp_id_t thermalRequestPoolId =
|
||||
DeviceHandlerIF::DEFAULT_THERMAL_HEATING_REQUEST_POOL_ID,
|
||||
uint32_t thermalSetId = DeviceHandlerIF::DEFAULT_THERMAL_SET_ID);
|
||||
/**
|
||||
* @brief Helper function to ease device handler development.
|
||||
* This will instruct the transition to MODE_ON immediately
|
||||
|
|
@ -694,19 +708,7 @@ protected:
|
|||
//! and to send replies.
|
||||
MessageQueueIF* commandQueue = nullptr;
|
||||
|
||||
/**
|
||||
* this is the datapool variable with the thermal state of the device
|
||||
*
|
||||
* can be set to PoolVariableIF::NO_PARAMETER to deactivate thermal checking
|
||||
*/
|
||||
uint32_t deviceThermalStatePoolId = PoolVariableIF::NO_PARAMETER;
|
||||
|
||||
/**
|
||||
* this is the datapool variable with the thermal request of the device
|
||||
*
|
||||
* can be set to PoolVariableIF::NO_PARAMETER to deactivate thermal checking
|
||||
*/
|
||||
uint32_t deviceThermalRequestPoolId = PoolVariableIF::NO_PARAMETER;
|
||||
DeviceHandlerThermalSet* thermalSet = nullptr;
|
||||
|
||||
/**
|
||||
* Optional Error code. Can be set in doStartUp(), doShutDown() and
|
||||
|
|
@ -732,15 +734,27 @@ protected:
|
|||
//! before setTaskIF was called.
|
||||
PeriodicTaskIF* executingTask = nullptr;
|
||||
|
||||
static object_id_t powerSwitcherId; //!< Object which switches power on and off.
|
||||
//!< Object which switches power on and off.
|
||||
static object_id_t powerSwitcherId;
|
||||
|
||||
static object_id_t rawDataReceiverId; //!< Object which receives RAW data by default.
|
||||
//!< Object which receives RAW data by default.
|
||||
static object_id_t rawDataReceiverId;
|
||||
|
||||
//!< Object which may be the root cause of an identified fault.
|
||||
static object_id_t defaultFdirParentId;
|
||||
|
||||
/**
|
||||
* Helper function to get pending command. This is useful for devices
|
||||
* like SPI sensors to identify the last sent command.
|
||||
* @return
|
||||
*/
|
||||
DeviceCommandId_t getPendingCommand() const;
|
||||
|
||||
static object_id_t defaultFdirParentId; //!< Object which may be the root cause of an identified fault.
|
||||
/**
|
||||
* Helper function to report a missed reply
|
||||
*
|
||||
* Can be overwritten by children to act on missed replies or to fake reporting Id.
|
||||
* Can be overwritten by children to act on missed replies or to fake
|
||||
* reporting Id.
|
||||
*
|
||||
* @param id of the missed reply
|
||||
*/
|
||||
|
|
@ -847,15 +861,18 @@ protected:
|
|||
/**
|
||||
* Build the device command to send for raw mode.
|
||||
*
|
||||
* This is only called in @c MODE_RAW. It is for the rare case that in raw mode packets
|
||||
* are to be sent by the handler itself. It is NOT needed for the raw commanding service.
|
||||
* Its only current use is in the STR handler which gets its raw packets from a different
|
||||
* source.
|
||||
* Also it can be used for transitional commands, to get the device ready for @c MODE_RAW
|
||||
* This is only called in @c MODE_RAW. It is for the rare case that in
|
||||
* raw mode packets are to be sent by the handler itself. It is NOT needed
|
||||
* for the raw commanding service. Its only current use is in the STR
|
||||
* handler which gets its raw packets from a different source.
|
||||
* Also it can be used for transitional commands, to get the device ready
|
||||
* for @c MODE_RAW
|
||||
*
|
||||
* As it is almost never used, there is a default implementation returning @c NOTHING_TO_SEND.
|
||||
* As it is almost never used, there is a default implementation
|
||||
* returning @c NOTHING_TO_SEND.
|
||||
*
|
||||
* #rawPacket and #rawPacketLen must be set by this method to the packet to be sent.
|
||||
* #rawPacket and #rawPacketLen must be set by this method to the packet
|
||||
* to be sent.
|
||||
*
|
||||
* @param[out] id the device command id built
|
||||
* @return
|
||||
|
|
@ -868,7 +885,9 @@ protected:
|
|||
* Returns the delay cycle count of a reply.
|
||||
* A count != 0 indicates that the command is already executed.
|
||||
* @param deviceCommand The command to look for
|
||||
* @return The current delay count. If the command does not exist (should never happen) it returns 0.
|
||||
* @return
|
||||
* The current delay count. If the command does not exist (should never
|
||||
* happen) it returns 0.
|
||||
*/
|
||||
uint8_t getReplyDelayCycles(DeviceCommandId_t deviceCommand);
|
||||
|
||||
|
|
@ -878,20 +897,22 @@ protected:
|
|||
* It gets space in the #IPCStore, copies data there, then sends a raw reply
|
||||
* containing the store address.
|
||||
*
|
||||
* This method is virtual, as the STR has a different channel to send raw replies
|
||||
* and overwrites it accordingly.
|
||||
* This method is virtual, as the STR has a different channel to send
|
||||
* raw replies and overwrites it accordingly.
|
||||
*
|
||||
* @param data data to send
|
||||
* @param len length of @c data
|
||||
* @param sendTo the messageQueueId of the one to send to
|
||||
* @param isCommand marks the raw data as a command, the message then will be of type raw_command
|
||||
* @param isCommand marks the raw data as a command, the message then
|
||||
* will be of type raw_command
|
||||
*/
|
||||
virtual void replyRawData(const uint8_t *data, size_t len,
|
||||
MessageQueueId_t sendTo, bool isCommand = false);
|
||||
|
||||
/**
|
||||
* Calls replyRawData() with #defaultRawReceiver, but checks if wiretapping is active and if so,
|
||||
* does not send the Data as the wiretapping will have sent it already
|
||||
* Calls replyRawData() with #defaultRawReceiver, but checks if wiretapping
|
||||
* is active and if so, does not send the data as the wiretapping will have
|
||||
* sent it already
|
||||
*/
|
||||
void replyRawReplyIfnotWiretapped(const uint8_t *data, size_t len);
|
||||
|
||||
|
|
@ -903,17 +924,19 @@ protected:
|
|||
/**
|
||||
* Enable the reply checking for a command
|
||||
*
|
||||
* Is only called, if the command was sent (ie the getWriteReply was successful).
|
||||
* Must ensure that all replies are activated and correctly linked to the command that initiated it.
|
||||
* The default implementation looks for a reply with the same id as the command id in the replyMap or
|
||||
* uses the alternativeReplyId if flagged so.
|
||||
* When found, copies maxDelayCycles to delayCycles in the reply information and sets the command to
|
||||
* expect one reply.
|
||||
* Is only called, if the command was sent (i.e. the getWriteReply was
|
||||
* successful). Must ensure that all replies are activated and correctly
|
||||
* linked to the command that initiated it.
|
||||
* The default implementation looks for a reply with the same id as the
|
||||
* command id in the replyMap or uses the alternativeReplyId if flagged so.
|
||||
* When found, copies maxDelayCycles to delayCycles in the reply information
|
||||
* and sets the command to expect one reply.
|
||||
*
|
||||
* Can be overwritten by the child, if a command activates multiple replies
|
||||
* or replyId differs from commandId.
|
||||
* Notes for child implementations:
|
||||
* - If the command was not found in the reply map, NO_REPLY_EXPECTED MUST be returned.
|
||||
* - If the command was not found in the reply map,
|
||||
* NO_REPLY_EXPECTED MUST be returned.
|
||||
* - A failure code may be returned if something went fundamentally wrong.
|
||||
*
|
||||
* @param deviceCommand
|
||||
|
|
@ -929,17 +952,20 @@ protected:
|
|||
* get the state of the PCDU switches in the datapool
|
||||
*
|
||||
* @return
|
||||
* - @c PowerSwitchIF::SWITCH_ON if all switches specified by #switches are on
|
||||
* - @c PowerSwitchIF::SWITCH_OFF one of the switches specified by #switches are off
|
||||
* - @c PowerSwitchIF::RETURN_FAILED if an error occured
|
||||
* - @c PowerSwitchIF::SWITCH_ON if all switches specified
|
||||
* by #switches are on
|
||||
* - @c PowerSwitchIF::SWITCH_OFF one of the switches specified by
|
||||
* #switches are off
|
||||
* - @c PowerSwitchIF::RETURN_FAILED if an error occured
|
||||
*/
|
||||
ReturnValue_t getStateOfSwitches(void);
|
||||
|
||||
/**
|
||||
* set all datapool variables that are update periodically in normal mode invalid
|
||||
*
|
||||
* Child classes should provide an implementation which sets all those variables invalid
|
||||
* which are set periodically during any normal mode.
|
||||
* @brief Set all datapool variables that are update periodically in
|
||||
* normal mode invalid
|
||||
* @details TODO: Use local pools
|
||||
* Child classes should provide an implementation which sets all those
|
||||
* variables invalid which are set periodically during any normal mode.
|
||||
*/
|
||||
virtual void setNormalDatapoolEntriesInvalid() = 0;
|
||||
|
||||
|
|
@ -949,11 +975,12 @@ protected:
|
|||
virtual void changeHK(Mode_t mode, Submode_t submode, bool enable);
|
||||
|
||||
/**
|
||||
* Children can overwrite this function to suppress checking of the command Queue
|
||||
* Children can overwrite this function to suppress checking of the
|
||||
* command Queue
|
||||
*
|
||||
* This can be used when the child does not want to receive a command in a certain
|
||||
* situation. Care must be taken that checking is not permanentely disabled as this
|
||||
* would render the handler unusable.
|
||||
* This can be used when the child does not want to receive a command in
|
||||
* a certain situation. Care must be taken that checking is not
|
||||
* permanentely disabled as this would render the handler unusable.
|
||||
*
|
||||
* @return whether checking the queue should NOT be done
|
||||
*/
|
||||
|
|
@ -992,17 +1019,20 @@ protected:
|
|||
virtual void forwardEvent(Event event, uint32_t parameter1 = 0,
|
||||
uint32_t parameter2 = 0) const;
|
||||
/**
|
||||
* Checks state of switches in conjunction with mode and triggers an event if they don't fit.
|
||||
* Checks state of switches in conjunction with mode and triggers an event
|
||||
* if they don't fit.
|
||||
*/
|
||||
virtual void checkSwitchState();
|
||||
|
||||
/**
|
||||
* Reserved for the rare case where a device needs to perform additional operation cyclically in OFF mode.
|
||||
* Reserved for the rare case where a device needs to perform additional
|
||||
* operation cyclically in OFF mode.
|
||||
*/
|
||||
virtual void doOffActivity();
|
||||
|
||||
/**
|
||||
* Reserved for the rare case where a device needs to perform additional operation cyclically in ON mode.
|
||||
* Reserved for the rare case where a device needs to perform additional
|
||||
* operation cyclically in ON mode.
|
||||
*/
|
||||
virtual void doOnActivity();
|
||||
|
||||
|
|
@ -1043,9 +1073,10 @@ private:
|
|||
/**
|
||||
* Information about a cookie.
|
||||
*
|
||||
* This is stored in a map for each cookie, to not only track the state, but also information
|
||||
* about the sent command. Tracking this information is needed as
|
||||
* the state of a commandId (waiting for reply) is done when a RMAP write reply is received.
|
||||
* This is stored in a map for each cookie, to not only track the state,
|
||||
* but also information about the sent command. Tracking this information
|
||||
* is needed as the state of a commandId (waiting for reply) is done when a
|
||||
* write reply is received.
|
||||
*/
|
||||
struct CookieInfo {
|
||||
CookieState_t state;
|
||||
|
|
@ -1102,10 +1133,14 @@ private:
|
|||
/**
|
||||
* Handle the device handler mode.
|
||||
*
|
||||
* - checks whether commands are valid for the current mode, rejects them accordingly
|
||||
* - checks whether commanded mode transitions are required and calls handleCommandedModeTransition()
|
||||
* - does the necessary action for the current mode or calls doChildStateMachine in modes @c MODE_TO_ON and @c MODE_TO_OFF
|
||||
* - actions that happen in transitions (eg setting a timeout) are handled in setMode()
|
||||
* - checks whether commands are valid for the current mode, rejects
|
||||
* them accordingly
|
||||
* - checks whether commanded mode transitions are required and calls
|
||||
* handleCommandedModeTransition()
|
||||
* - does the necessary action for the current mode or calls
|
||||
* doChildStateMachine in modes @c MODE_TO_ON and @c MODE_TO_OFF
|
||||
* - actions that happen in transitions (e.g. setting a timeout) are
|
||||
* handled in setMode()
|
||||
*/
|
||||
void doStateMachine(void);
|
||||
|
||||
|
|
@ -1115,16 +1150,17 @@ private:
|
|||
/**
|
||||
* Decrement the counter for the timout of replies.
|
||||
*
|
||||
* This is called at the beginning of each cycle. It checks whether a reply has timed out (that means a reply was expected
|
||||
* but not received).
|
||||
* This is called at the beginning of each cycle. It checks whether a
|
||||
* reply has timed out (that means a reply was expected but not received).
|
||||
*/
|
||||
void decrementDeviceReplyMap(void);
|
||||
|
||||
/**
|
||||
* Convenience function to handle a reply.
|
||||
*
|
||||
* Called after scanForReply() has found a packet. Checks if the found id is in the #deviceCommandMap, if so,
|
||||
* calls interpretDeviceReply(DeviceCommandId_t id, const uint8_t *packet) for further action.
|
||||
* Called after scanForReply() has found a packet. Checks if the found ID
|
||||
* is in the #deviceCommandMap, if so, calls
|
||||
* #interpretDeviceReply for further action.
|
||||
*
|
||||
* It also resets the timeout counter for the command id.
|
||||
*
|
||||
|
|
@ -1184,7 +1220,7 @@ private:
|
|||
* @param[out] len
|
||||
* @return
|
||||
* - @c RETURN_OK @c data is valid
|
||||
* - @c RETURN_FAILED IPCStore is NULL
|
||||
* - @c RETURN_FAILED IPCStore is nullptr
|
||||
* - the return value from the IPCStore if it was not @c RETURN_OK
|
||||
*/
|
||||
ReturnValue_t getStorageData(store_address_t storageAddress, uint8_t **data,
|
||||
|
|
@ -1208,6 +1244,9 @@ private:
|
|||
|
||||
void parseReply(const uint8_t* receivedData,
|
||||
size_t receivedDataLen);
|
||||
|
||||
void handleTransitionToOnMode(Mode_t commandedMode,
|
||||
Submode_t commandedSubmode);
|
||||
};
|
||||
|
||||
#endif /* FSFW_DEVICEHANDLERS_DEVICEHANDLERBASE_H_ */
|
||||
|
|
|
|||
Loading…
Reference in New Issue