fsfw-example-common/stm32h7/networking/ethernetif.c

/**
 ******************************************************************************
 * @file    LwIP/LwIP_UDP_Echo_Client/Src/ethernetif.c
 * @author  MCD Application Team
 * @brief   This file implements Ethernet network interface drivers for lwIP
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
 * All rights reserved.</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted, provided that the following conditions are met:
 *
 * 1. Redistribution of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. Neither the name of STMicroelectronics nor the names of other
 *    contributors to this software may be used to endorse or promote products
 *    derived from this software without specific written permission.
 * 4. This software, including modifications and/or derivative works of this
 *    software, must execute solely and exclusively on microcontroller or
 *    microprocessor devices manufactured by or for STMicroelectronics.
 * 5. Redistribution and use of this software other than as permitted under
 *    this license is void and will automatically terminate your rights under
 *    this license.
 *
 * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
 * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
 * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
 * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************
 */

/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"
#include "lwip/opt.h"
#include "lwip/timeouts.h"
#include "lwip/netif.h"
#include "netif/etharp.h"
#include "ethernetif.h"
#include "lan8742.h"
#include <string.h>

#include <stdbool.h>
#include "fsfw/FSFW.h"

#ifdef FSFW_OSAL_RTEMS
#include <rtems.h>
#endif

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Network interface name */
#define IFNAME0 's'
#define IFNAME1 't'

#define ETH_DMA_TRANSMIT_TIMEOUT                (20U)

#define ETH_RX_BUFFER_SIZE            1536U
#define ETH_RX_BUFFER_CNT             12U
#define ETH_TX_BUFFER_MAX             ((ETH_TX_DESC_CNT) * 2U)

#define DMA_DESCRIPTOR_ALIGNMENT 0x20

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/*
@Note: This interface is implemented to operate in zero-copy mode only:
        - Rx buffers are allocated statically and passed directly to the LwIP
stack they will return back to DMA after been processed by the stack.
        - Tx Buffers will be allocated from LwIP stack memory heap,
          then passed to ETH HAL driver.

@Notes:
  1.a. ETH DMA Rx descriptors must be contiguous, the default count is 4,
       to customize it please redefine ETH_RX_DESC_CNT in stm32xxxx_hal_conf.h
  1.b. ETH DMA Tx descriptors must be contiguous, the default count is 4,
       to customize it please redefine ETH_TX_DESC_CNT in stm32xxxx_hal_conf.h

  2.a. Rx Buffers number must be between ETH_RX_DESC_CNT and 2*ETH_RX_DESC_CNT
  2.b. Rx Buffers must have the same size: ETH_RX_BUFFER_SIZE, this value must
       passed to ETH DMA in the init field (EthHandle.Init.RxBuffLen)
*/
typedef enum
{
  RX_ALLOC_OK       = 0x00,
  RX_ALLOC_ERROR    = 0x01
} RxAllocStatusTypeDef;

typedef struct
{
  struct pbuf_custom pbuf_custom;
  uint8_t buff[(ETH_RX_BUFFER_SIZE + 31) & ~31] __ALIGNED(32);
} RxBuff_t;

#if defined(__ICCARM__) /*!< IAR Compiler */

#pragma location=0x30000000
ETH_DMADescTypeDef  DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
#pragma location=0x30000200
ETH_DMADescTypeDef  DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */


#elif defined(__CC_ARM) /* MDK ARM Compiler */

__attribute__((section(".RxDecripSection"))) ETH_DMADescTypeDef  DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
__attribute__((section(".TxDecripSection"))) ETH_DMADescTypeDef  DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */

#elif defined(__GNUC__) /* GNU Compiler */

#ifdef FSFW_OSAL_RTEMS
/* Put into special RTEMS section and align correctly */
ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((
    section(".bsp_nocache"),
    __aligned__(DMA_DESCRIPTOR_ALIGNMENT))); /* Ethernet Rx DMA Descriptors */
/* Put into special RTEMS section and align correctly */
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((
    section(".bsp_nocache"),
    __aligned__(DMA_DESCRIPTOR_ALIGNMENT))); /* Ethernet Tx DMA Descriptors */
/* Ethernet Receive Buffers. Just place somewhere is BSS instead of explicitely
 * placing it */
uint8_t Rx_Buff[ETH_RX_DESC_CNT][ETH_RX_BUFFER_SIZE];
#elif defined FSFW_OSAL_FREERTOS

ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDecripSection"))); /* Ethernet Rx DMA Descriptors */
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDecripSection")));   /* Ethernet Tx DMA Descriptors */

#endif /* FSFW_OSAL_RTEMS */

#endif /* defined ( __GNUC__ ) */

/* Memory Pool Declaration */
LWIP_MEMPOOL_DECLARE(RX_POOL, ETH_RX_BUFFER_CNT, sizeof(RxBuff_t), "Zero-copy RX PBUF pool");

#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma location = 0x30000400
extern u8_t memp_memory_RX_POOL_base[];

#elif defined ( __CC_ARM )  /* MDK ARM Compiler */
__attribute__((section(".Rx_PoolSection"))) extern u8_t memp_memory_RX_POOL_base[];

#elif defined ( __GNUC__ ) /* GNU Compiler */
__attribute__((section(".Rx_PoolSection"))) extern u8_t memp_memory_RX_POOL_base[];

#endif

/* Global boolean to track ethernet connection */
bool ethernet_cable_connected;

/* Variable Definitions */
static uint8_t RxAllocStatus;

/* Global Ethernet handle*/
ETH_HandleTypeDef EthHandle;
ETH_TxPacketConfig TxConfig;

/* Private function prototypes -----------------------------------------------*/
u32_t sys_now(void);
extern void Error_Handler(void);
int32_t ETH_PHY_IO_Init(void);
int32_t ETH_PHY_IO_DeInit (void);
int32_t ETH_PHY_IO_ReadReg(uint32_t DevAddr, uint32_t RegAddr, uint32_t *pRegVal);
int32_t ETH_PHY_IO_WriteReg(uint32_t DevAddr, uint32_t RegAddr, uint32_t RegVal);
int32_t ETH_PHY_IO_GetTick(void);

lan8742_Object_t LAN8742;
lan8742_IOCtx_t  LAN8742_IOCtx = {ETH_PHY_IO_Init,
                                 ETH_PHY_IO_DeInit,
                                 ETH_PHY_IO_WriteReg,
                                 ETH_PHY_IO_ReadReg,
                                 ETH_PHY_IO_GetTick};

/* Private functions ---------------------------------------------------------*/
void pbuf_free_custom(struct pbuf *p);
/*******************************************************************************
                       LL Driver Interface ( LwIP stack --> ETH)
*******************************************************************************/
/**
 * @brief In this function, the hardware should be initialized.
 * Called from ethernetif_init().
 *
 * @param netif the already initialized lwip network interface structure
 *        for this ethernetif
 */
static void low_level_init(struct netif *netif) {
  uint8_t macaddress[6]= {ETH_MAC_ADDR0, ETH_MAC_ADDR1, ETH_MAC_ADDR2, ETH_MAC_ADDR3, ETH_MAC_ADDR4, ETH_MAC_ADDR5};

  EthHandle.Instance = ETH;
  EthHandle.Init.MACAddr = macaddress;
  EthHandle.Init.MediaInterface = HAL_ETH_RMII_MODE;
  EthHandle.Init.RxDesc = DMARxDscrTab;
  EthHandle.Init.TxDesc = DMATxDscrTab;
  EthHandle.Init.RxBuffLen = ETH_RX_BUFFER_SIZE;

  /* configure ethernet peripheral (GPIOs, clocks, MAC, DMA) */
  HAL_ETH_Init(&EthHandle);

  /* set MAC hardware address length */
  netif->hwaddr_len = ETH_HWADDR_LEN;

  /* set MAC hardware address */
  netif->hwaddr[0] =  ETH_MAC_ADDR0;
  netif->hwaddr[1] =  ETH_MAC_ADDR1;
  netif->hwaddr[2] =  ETH_MAC_ADDR2;
  netif->hwaddr[3] =  ETH_MAC_ADDR3;
  netif->hwaddr[4] =  ETH_MAC_ADDR4;
  netif->hwaddr[5] =  ETH_MAC_ADDR5;

  /* maximum transfer unit */
  netif->mtu = ETH_MAX_PAYLOAD;

  /* device capabilities */
  /* don't set NETIF_FLAG_ETHARP if this device is not an ethernet one */
  netif->flags |= NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP;

  /* Initialize the RX POOL */
  LWIP_MEMPOOL_INIT(RX_POOL);

  /* Set Tx packet config common parameters */
  memset(&TxConfig, 0 , sizeof(ETH_TxPacketConfig));
  TxConfig.Attributes = ETH_TX_PACKETS_FEATURES_CSUM | ETH_TX_PACKETS_FEATURES_CRCPAD;
  TxConfig.ChecksumCtrl = ETH_CHECKSUM_IPHDR_PAYLOAD_INSERT_PHDR_CALC;
  TxConfig.CRCPadCtrl = ETH_CRC_PAD_INSERT;

  /* Set PHY IO functions */
  LAN8742_RegisterBusIO(&LAN8742, &LAN8742_IOCtx);

  /* Initialize the LAN8742 ETH PHY */
  LAN8742_Init(&LAN8742);

  ethernet_link_check_state(netif);
}

/**
 * @brief This function should do the actual transmission of the packet. The
 * packet is contained in the pbuf that is passed to the function. This pbuf
 * might be chained.
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @param p the MAC packet to send (e.g. IP packet including MAC addresses and
 * type)
 * @return ERR_OK if the packet could be sent
 *         an err_t value if the packet couldn't be sent
 *
 * @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to
 *       strange results. You might consider waiting for space in the DMA queue
 *       to become availale since the stack doesn't retry to send a packet
 *       dropped because of memory failure (except for the TCP timers).
 */
static err_t low_level_output(struct netif *netif, struct pbuf *p) {
  uint32_t i = 0U;
  struct pbuf *q = NULL;
  err_t errval = ERR_OK;
  ETH_BufferTypeDef Txbuffer[ETH_TX_DESC_CNT] = {0};

  memset(Txbuffer, 0 , ETH_TX_DESC_CNT*sizeof(ETH_BufferTypeDef));

  for(q = p; q != NULL; q = q->next)
  {
    if(i >= ETH_TX_DESC_CNT)
      return ERR_IF;

    Txbuffer[i].buffer = q->payload;
    Txbuffer[i].len = q->len;

    if(i>0)
    {
      Txbuffer[i-1].next = &Txbuffer[i];
    }

    if(q->next == NULL)
    {
      Txbuffer[i].next = NULL;
    }

    i++;
  }

  TxConfig.Length = p->tot_len;
  TxConfig.TxBuffer = Txbuffer;
  TxConfig.pData = p;

  HAL_StatusTypeDef ret = HAL_ETH_Transmit(&EthHandle, &TxConfig, ETH_DMA_TRANSMIT_TIMEOUT);
  if (ret != HAL_OK) {
    printf("low_level_output: Could not transmit ethernet packet, code %d!\n\r",
           ret);
  }
  return errval;
}

/**
 * @brief Should allocate a pbuf and transfer the bytes of the incoming
 * packet from the interface into the pbuf.
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @return a pbuf filled with the received packet (including MAC header)
 *         NULL on memory error
 */
static struct pbuf *low_level_input(struct netif *netif) {
  struct pbuf *p = NULL;

  if(RxAllocStatus == RX_ALLOC_OK)
  {
    HAL_ETH_ReadData(&EthHandle, (void **)&p);
  }

  return p;
}

/**
 * @brief This function is the ethernetif_input task, it is processed when a
 * packet is ready to be read from the interface. It uses the function
 * low_level_input() that should handle the actual reception of bytes from the
 * network interface. Then the type of the received packet is determined and the
 * appropriate input function is called.
 *
 * @param netif the lwip network interface structure for this ethernetif
 */
void ethernetif_input(struct netif *netif) {
  struct pbuf *p = NULL;

  do
  {
    p = low_level_input( netif );
    if (p != NULL)
    {
      if (netif->input( p, netif) != ERR_OK )
      {
        pbuf_free(p);
      }
    }

  } while(p!=NULL);

}

/**
 * @brief Should be called at the beginning of the program to set up the
 * network interface. It calls the function low_level_init() to do the
 * actual setup of the hardware.
 *
 * This function should be passed as a parameter to netif_add().
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @return ERR_OK if the loopif is initialized
 *         ERR_MEM if private data couldn't be allocated
 *         any other err_t on error
 */
err_t ethernetif_init(struct netif *netif) {
  LWIP_ASSERT("netif != NULL", (netif != NULL));

#if LWIP_NETIF_HOSTNAME
  /* Initialize interface hostname */
  netif->hostname = "lwip";
#endif /* LWIP_NETIF_HOSTNAME */

  netif->name[0] = IFNAME0;
  netif->name[1] = IFNAME1;

  /* We directly use etharp_output() here to save a function call.
   * You can instead declare your own function an call etharp_output()
   * from it if you have to do some checks before sending (e.g. if link
   * is available...) */
  netif->output = etharp_output;
  netif->linkoutput = low_level_output;

  /* initialize the hardware */
  low_level_init(netif);

  return ERR_OK;
}

/**
 * @brief  Custom Rx pbuf free callback
 * @param  pbuf: pbuf to be freed
 * @retval None
 */
void pbuf_free_custom(struct pbuf *p) {
  struct pbuf_custom* custom_pbuf = (struct pbuf_custom*)p;
  LWIP_MEMPOOL_FREE(RX_POOL, custom_pbuf);
  /* If the Rx Buffer Pool was exhausted, signal the ethernetif_input task to
   * call HAL_ETH_GetRxDataBuffer to rebuild the Rx descriptors. */
  if (RxAllocStatus == RX_ALLOC_ERROR)
  {
    RxAllocStatus = RX_ALLOC_OK;
  }
}

/**
 * @brief  Returns the current time in milliseconds
 *         when LWIP_TIMERS == 1 and NO_SYS == 1
 * @param  None
 * @retval Current Time value
 */
u32_t sys_now(void) { return HAL_GetTick(); }

/*******************************************************************************
                       Ethernet MSP Routines
*******************************************************************************/
/**
 * @brief  Initializes the ETH MSP.
 * @param  heth: ETH handle
 * @retval None
 */
void HAL_ETH_MspInit(ETH_HandleTypeDef *heth) {
  GPIO_InitTypeDef GPIO_InitStructure;

  /* Ethernett MSP init: RMII Mode */

  /* Enable GPIOs clocks */
  __HAL_RCC_GPIOA_CLK_ENABLE();
  __HAL_RCC_GPIOB_CLK_ENABLE();
  __HAL_RCC_GPIOC_CLK_ENABLE();
  __HAL_RCC_GPIOG_CLK_ENABLE();

  /* Ethernet pins configuration
   * ************************************************/
  /*
        RMII_REF_CLK ----------------------> PA1
        RMII_MDIO -------------------------> PA2
        RMII_MDC --------------------------> PC1
        RMII_MII_CRS_DV -------------------> PA7
        RMII_MII_RXD0 ---------------------> PC4
        RMII_MII_RXD1 ---------------------> PC5
        RMII_MII_RXER ---------------------> PG2
        RMII_MII_TX_EN --------------------> PG11
        RMII_MII_TXD0 ---------------------> PG13
        RMII_MII_TXD1 ---------------------> PB13
  */

  /* Configure PA1, PA2 and PA7 */
  GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH;
  GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStructure.Pull = GPIO_NOPULL;
  GPIO_InitStructure.Alternate = GPIO_AF11_ETH;
  GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_7;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);

  /* Configure PB13 */
  GPIO_InitStructure.Pin = GPIO_PIN_13;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);

  /* Configure PC1, PC4 and PC5 */
  GPIO_InitStructure.Pin = GPIO_PIN_1 | GPIO_PIN_4 | GPIO_PIN_5;
  HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);

  /* Configure PG2, PG11, PG13 and PG14 */
  GPIO_InitStructure.Pin = GPIO_PIN_2 | GPIO_PIN_11 | GPIO_PIN_13;
  HAL_GPIO_Init(GPIOG, &GPIO_InitStructure);

#if NO_SYS == 0
  /* Enable the Ethernet global Interrupt */
  HAL_NVIC_SetPriority(ETH_IRQn, 0x7, 0);
  HAL_NVIC_EnableIRQ(ETH_IRQn);
#endif

  /* Enable Ethernet clocks */
  __HAL_RCC_ETH1MAC_CLK_ENABLE();
  __HAL_RCC_ETH1TX_CLK_ENABLE();
  __HAL_RCC_ETH1RX_CLK_ENABLE();
}

/*******************************************************************************
                       PHI IO Functions
*******************************************************************************/
/**
 * @brief  Initializes the MDIO interface GPIO and clocks.
 * @param  None
 * @retval 0 if OK, -1 if ERROR
 */
int32_t ETH_PHY_IO_Init(void) {
  /* We assume that MDIO GPIO configuration is already done
     in the ETH_MspInit() else it should be done here
  */

  /* Configure the MDIO Clock */
  HAL_ETH_SetMDIOClockRange(&EthHandle);

  return 0;
}

/**
 * @brief  De-Initializes the MDIO interface .
 * @param  None
 * @retval 0 if OK, -1 if ERROR
 */
int32_t ETH_PHY_IO_DeInit(void) { return 0; }

/**
 * @brief  Read a PHY register through the MDIO interface.
 * @param  DevAddr: PHY port address
 * @param  RegAddr: PHY register address
 * @param  pRegVal: pointer to hold the register value
 * @retval 0 if OK -1 if Error
 */
int32_t ETH_PHY_IO_ReadReg(uint32_t DevAddr, uint32_t RegAddr,
                           uint32_t *pRegVal) {
  if (HAL_ETH_ReadPHYRegister(&EthHandle, DevAddr, RegAddr, pRegVal) !=
      HAL_OK) {
    return -1;
  }

  return 0;
}

/**
 * @brief  Write a value to a PHY register through the MDIO interface.
 * @param  DevAddr: PHY port address
 * @param  RegAddr: PHY register address
 * @param  RegVal: Value to be written
 * @retval 0 if OK -1 if Error
 */
int32_t ETH_PHY_IO_WriteReg(uint32_t DevAddr, uint32_t RegAddr,
                            uint32_t RegVal) {
  if (HAL_ETH_WritePHYRegister(&EthHandle, DevAddr, RegAddr, RegVal) !=
      HAL_OK) {
    return -1;
  }

  return 0;
}

/**
 * @brief  Get the time in millisecons used for internal PHY driver process.
 * @retval Time value
 */
int32_t ETH_PHY_IO_GetTick(void) { return HAL_GetTick(); }

/**
 * @brief
 * @retval None
 */
void ethernet_link_check_state(struct netif *netif) {
  ETH_MACConfigTypeDef MACConf = {0};
  int32_t PHYLinkState = 0U;
  uint32_t linkchanged = 0U, speed = 0U, duplex = 0U;

  PHYLinkState = LAN8742_GetLinkState(&LAN8742);

  if(netif_is_link_up(netif) && (PHYLinkState <= LAN8742_STATUS_LINK_DOWN))
  {
    HAL_ETH_Stop_IT(&EthHandle);
    netif_set_down(netif);
    netif_set_link_down(netif);
  }
  else if(!netif_is_link_up(netif) && (PHYLinkState > LAN8742_STATUS_LINK_DOWN))
  {
    switch (PHYLinkState)
    {
    case LAN8742_STATUS_100MBITS_FULLDUPLEX:
      duplex = ETH_FULLDUPLEX_MODE;
      speed = ETH_SPEED_100M;
      linkchanged = 1;
      break;
    case LAN8742_STATUS_100MBITS_HALFDUPLEX:
      duplex = ETH_HALFDUPLEX_MODE;
      speed = ETH_SPEED_100M;
      linkchanged = 1;
      break;
    case LAN8742_STATUS_10MBITS_FULLDUPLEX:
      duplex = ETH_FULLDUPLEX_MODE;
      speed = ETH_SPEED_10M;
      linkchanged = 1;
      break;
    case LAN8742_STATUS_10MBITS_HALFDUPLEX:
      duplex = ETH_HALFDUPLEX_MODE;
      speed = ETH_SPEED_10M;
      linkchanged = 1;
      break;
    default:
      break;
    }

    if(linkchanged)
    {
      /* Get MAC Config MAC */
      HAL_ETH_GetMACConfig(&EthHandle, &MACConf);
      MACConf.DuplexMode = duplex;
      MACConf.Speed = speed;
      HAL_ETH_SetMACConfig(&EthHandle, &MACConf);
      HAL_ETH_Start_IT(&EthHandle);
      netif_set_up(netif);
      netif_set_link_up(netif);
    }
  }
}

void HAL_ETH_RxAllocateCallback(uint8_t **buff)
{
  struct pbuf_custom *p = LWIP_MEMPOOL_ALLOC(RX_POOL);
  if (p)
  {
    /* Get the buff from the struct pbuf address. */
    *buff = (uint8_t *)p + offsetof(RxBuff_t, buff);
    p->custom_free_function = pbuf_free_custom;
    /* Initialize the struct pbuf.
    * This must be performed whenever a buffer's allocated because it may be
    * changed by lwIP or the app, e.g., pbuf_free decrements ref. */
    pbuf_alloced_custom(PBUF_RAW, 0, PBUF_REF, p, *buff, ETH_RX_BUFFER_SIZE);
  }
  else
  {
    RxAllocStatus = RX_ALLOC_ERROR;
    *buff = NULL;
  }
}

void HAL_ETH_RxLinkCallback(void **pStart, void **pEnd, uint8_t *buff, uint16_t Length)
{
  struct pbuf **ppStart = (struct pbuf **)pStart;
  struct pbuf **ppEnd = (struct pbuf **)pEnd;
  struct pbuf *p = NULL;

  /* Get the struct pbuf from the buff address. */
  p = (struct pbuf *)(buff - offsetof(RxBuff_t, buff));
  p->next = NULL;
  p->tot_len = 0;
  p->len = Length;

  /* Chain the buffer. */
  if (!*ppStart)
  {
    /* The first buffer of the packet. */
    *ppStart = p;
  }
  else
  {
    /* Chain the buffer to the end of the packet. */
    (*ppEnd)->next = p;
  }
  *ppEnd  = p;

  /* Update the total length of all the buffers of the chain. Each pbuf in the chain should have its tot_len
   * set to its own length, plus the length of all the following pbufs in the chain. */
  for (p = *ppStart; p != NULL; p = p->next)
  {
    p->tot_len += Length;
  }

  /* Invalidate data cache because Rx DMA's writing to physical memory makes it stale. */
  SCB_InvalidateDCache_by_Addr((uint32_t *)buff, Length);
}

void HAL_ETH_TxFreeCallback(uint32_t * buff)
{
  pbuf_free((struct pbuf *)buff);
}

ETH_HandleTypeDef *getEthernetHandle() { return &EthHandle; }

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/