why have two files
Some checks are pending
Rust/sat-rs/pipeline/head Build started...

This commit is contained in:
Robin Müller 2024-03-22 13:09:27 +01:00
parent d27a41e4de
commit 6a6ffba754

View File

@ -1,28 +0,0 @@
[target.'cfg(all(target_arch = "arm", target_os = "none"))']
# uncomment ONE of these three option to make `cargo run` start a GDB session
# which option to pick depends on your system
# You can also replace openocd.gdb by jlink.gdb when using a J-Link.
# runner = "arm-none-eabi-gdb -q -x openocd.gdb"
# runner = "gdb-multiarch -q -x openocd.gdb"
# runner = "gdb -q -x openocd.gdb"
# runner = "probe-run --chip STM32F303VCTx --connect-under-reset"
rustflags = [
# LLD (shipped with the Rust toolchain) is used as the default linker
"-C", "link-arg=-Tlink.x",
# if you run into problems with LLD switch to the GNU linker by commenting out
# this line
# "-C", "linker=arm-none-eabi-ld",
# if you need to link to pre-compiled C libraries provided by a C toolchain
# use GCC as the linker by commenting out both lines above and then
# uncommenting the three lines below
# "-C", "linker=arm-none-eabi-gcc",
# "-C", "link-arg=-Wl,-Tlink.x",
# "-C", "link-arg=-nostartfiles",
]
[build]
# comment out the following line if you intend to run unit tests on host machine
target = "thumbv7em-none-eabihf" # Cortex-M4F and Cortex-M7F (with FPU)