583 lines
22 KiB
Rust
583 lines
22 KiB
Rust
#![no_std]
|
|
#![no_main]
|
|
extern crate panic_itm;
|
|
|
|
use rtic::app;
|
|
|
|
use heapless::{mpmc::Q8, Vec};
|
|
#[allow(unused_imports)]
|
|
use itm_logger::{debug, info, logger_init, warn};
|
|
use satrs::seq_count::SequenceCountProviderCore;
|
|
use satrs::{
|
|
pool::StoreError,
|
|
pus::{EcssChannel, EcssTmSenderCore, EcssTmtcError, PusTmWrapper},
|
|
spacepackets::{ecss::PusPacket, ecss::WritablePusPacket},
|
|
};
|
|
use stm32f3xx_hal::dma::dma1;
|
|
use stm32f3xx_hal::gpio::{PushPull, AF7, PA2, PA3};
|
|
use stm32f3xx_hal::pac::USART2;
|
|
use stm32f3xx_hal::serial::{Rx, RxEvent, Serial, SerialDmaRx, SerialDmaTx, Tx, TxEvent};
|
|
use systick_monotonic::{fugit::Duration, Systick};
|
|
|
|
const UART_BAUD: u32 = 115200;
|
|
const BLINK_FREQ_MS: u64 = 1000;
|
|
const TX_HANDLER_FREQ_MS: u64 = 20;
|
|
const MIN_DELAY_BETWEEN_TX_PACKETS_MS: u16 = 5;
|
|
const MAX_TC_LEN: usize = 128;
|
|
const MAX_TM_LEN: usize = 128;
|
|
pub const PUS_APID: u16 = 0x02;
|
|
|
|
type TxType = Tx<USART2, PA2<AF7<PushPull>>>;
|
|
type RxType = Rx<USART2, PA3<AF7<PushPull>>>;
|
|
type MsDuration = Duration<u64, 1, 1000>;
|
|
type TxDmaTransferType = SerialDmaTx<&'static [u8], dma1::C7, TxType>;
|
|
type RxDmaTransferType = SerialDmaRx<&'static mut [u8], dma1::C6, RxType>;
|
|
|
|
// This is the predictable maximum overhead of the COBS encoding scheme.
|
|
// It is simply the maximum packet lenght dividied by 254 rounded up.
|
|
const COBS_TC_OVERHEAD: usize = (MAX_TC_LEN + 254 - 1) / 254;
|
|
const COBS_TM_OVERHEAD: usize = (MAX_TM_LEN + 254 - 1) / 254;
|
|
|
|
const TC_BUF_LEN: usize = MAX_TC_LEN + COBS_TC_OVERHEAD;
|
|
const TM_BUF_LEN: usize = MAX_TC_LEN + COBS_TM_OVERHEAD;
|
|
|
|
// This is a static buffer which should ONLY (!) be used as the TX DMA
|
|
// transfer buffer.
|
|
static mut DMA_TX_BUF: [u8; TM_BUF_LEN] = [0; TM_BUF_LEN];
|
|
// This is a static buffer which should ONLY (!) be used as the RX DMA
|
|
// transfer buffer.
|
|
static mut DMA_RX_BUF: [u8; TC_BUF_LEN] = [0; TC_BUF_LEN];
|
|
|
|
type TmPacket = Vec<u8, MAX_TM_LEN>;
|
|
type TcPacket = Vec<u8, MAX_TC_LEN>;
|
|
|
|
static TM_REQUESTS: Q8<TmPacket> = Q8::new();
|
|
|
|
const TC_POOL_SLOTS: usize = 8;
|
|
const TM_POOL_SLOTS: usize = 8;
|
|
|
|
use core::cell::RefCell;
|
|
use core::sync::atomic::{AtomicU16, Ordering};
|
|
|
|
pub struct SeqCountProviderAtomicRef {
|
|
atomic: AtomicU16,
|
|
ordering: Ordering,
|
|
}
|
|
|
|
impl SeqCountProviderAtomicRef {
|
|
pub const fn new(ordering: Ordering) -> Self {
|
|
Self {
|
|
atomic: AtomicU16::new(0),
|
|
ordering,
|
|
}
|
|
}
|
|
}
|
|
|
|
impl SequenceCountProviderCore<u16> for SeqCountProviderAtomicRef {
|
|
fn get(&self) -> u16 {
|
|
self.atomic.load(self.ordering)
|
|
}
|
|
|
|
fn increment(&self) {
|
|
self.atomic.fetch_add(1, self.ordering);
|
|
}
|
|
|
|
fn get_and_increment(&self) -> u16 {
|
|
self.atomic.fetch_add(1, self.ordering)
|
|
}
|
|
}
|
|
|
|
static SEQ_COUNT_PROVIDER: SeqCountProviderAtomicRef =
|
|
SeqCountProviderAtomicRef::new(Ordering::Relaxed);
|
|
|
|
pub struct TxIdle {
|
|
tx: TxType,
|
|
dma_channel: dma1::C7,
|
|
}
|
|
|
|
pub struct TmSender {
|
|
vec: Option<RefCell<Vec<u8, MAX_TM_LEN>>>,
|
|
ctx: &'static str,
|
|
}
|
|
|
|
impl TmSender {
|
|
pub fn new(tm_packet: TmPacket, ctx: &'static str) -> Self {
|
|
Self {
|
|
vec: Some(RefCell::new(tm_packet)),
|
|
ctx,
|
|
}
|
|
}
|
|
}
|
|
|
|
impl EcssChannel for TmSender {
|
|
fn id(&self) -> satrs::ChannelId {
|
|
0
|
|
}
|
|
}
|
|
|
|
impl EcssTmSenderCore for TmSender {
|
|
fn send_tm(&self, tm: PusTmWrapper) -> Result<(), EcssTmtcError> {
|
|
let vec = self.vec.as_ref();
|
|
if vec.is_none() {
|
|
panic!("send_tm should only be called once");
|
|
}
|
|
let vec_ref = vec.unwrap();
|
|
let mut vec = vec_ref.borrow_mut();
|
|
match tm {
|
|
PusTmWrapper::InStore(addr) => return Err(EcssTmtcError::CantSendAddr(addr)),
|
|
PusTmWrapper::Direct(tm) => {
|
|
if tm.len_written() > MAX_TM_LEN {
|
|
return Err(EcssTmtcError::Store(StoreError::DataTooLarge(
|
|
tm.len_written(),
|
|
)));
|
|
}
|
|
vec.resize(tm.len_written(), 0).expect("vec resize failed");
|
|
tm.write_to_bytes(vec.as_mut_slice())?;
|
|
info!(target: self.ctx, "Sending TM[{},{}] with size {}", tm.service(), tm.subservice(), tm.len_written());
|
|
drop(vec);
|
|
TM_REQUESTS
|
|
.enqueue(vec_ref.take())
|
|
.map_err(|_| EcssTmtcError::Store(StoreError::StoreFull(0)))?;
|
|
}
|
|
}
|
|
Ok(())
|
|
}
|
|
}
|
|
|
|
pub enum UartTxState {
|
|
// Wrapped in an option because we need an owned type later.
|
|
Idle(Option<TxIdle>),
|
|
// Same as above
|
|
Transmitting(Option<TxDmaTransferType>),
|
|
}
|
|
|
|
#[app(device = stm32f3xx_hal::pac, peripherals = true, dispatchers = [TIM20_BRK, TIM20_UP, TIM20_TRG_COM])]
|
|
mod app {
|
|
use super::*;
|
|
use core::slice::Iter;
|
|
use cortex_m::iprintln;
|
|
use satrs::pus::verification::FailParams;
|
|
use satrs::pus::verification::VerificationReporterCore;
|
|
use satrs::spacepackets::{
|
|
ecss::tc::PusTcReader, ecss::tm::PusTmCreator, ecss::tm::PusTmSecondaryHeader,
|
|
ecss::EcssEnumU16, time::cds::P_FIELD_BASE, CcsdsPacket, SpHeader,
|
|
};
|
|
#[allow(unused_imports)]
|
|
use stm32f3_discovery::leds::Direction;
|
|
use stm32f3_discovery::leds::Leds;
|
|
use stm32f3xx_hal::prelude::*;
|
|
use stm32f3xx_hal::Toggle;
|
|
|
|
use stm32f3_discovery::switch_hal::OutputSwitch;
|
|
#[allow(dead_code)]
|
|
type SerialType = Serial<USART2, (PA2<AF7<PushPull>>, PA3<AF7<PushPull>>)>;
|
|
|
|
#[shared]
|
|
struct Shared {
|
|
tx_transfer: UartTxState,
|
|
rx_transfer: Option<RxDmaTransferType>,
|
|
}
|
|
|
|
#[local]
|
|
struct Local {
|
|
leds: Leds,
|
|
last_dir: Direction,
|
|
verif_reporter: VerificationReporterCore,
|
|
curr_dir: Iter<'static, Direction>,
|
|
}
|
|
|
|
#[monotonic(binds = SysTick, default = true)]
|
|
type MonoTimer = Systick<1000>;
|
|
|
|
#[init(local = [
|
|
tc_pool_mem: [u8; TC_BUF_LEN * TC_POOL_SLOTS] = [0; TC_BUF_LEN * TC_POOL_SLOTS],
|
|
tm_pool_mem: [u8; MAX_TM_LEN * TM_POOL_SLOTS] = [0; MAX_TM_LEN * TM_POOL_SLOTS]
|
|
])]
|
|
fn init(mut cx: init::Context) -> (Shared, Local, init::Monotonics) {
|
|
let mut rcc = cx.device.RCC.constrain();
|
|
|
|
let mono = Systick::new(cx.core.SYST, 8_000_000);
|
|
logger_init();
|
|
let mut flash = cx.device.FLASH.constrain();
|
|
let clocks = rcc
|
|
.cfgr
|
|
.use_hse(8.MHz())
|
|
.sysclk(8.MHz())
|
|
.pclk1(8.MHz())
|
|
.freeze(&mut flash.acr);
|
|
// setup ITM output
|
|
iprintln!(
|
|
&mut cx.core.ITM.stim[0],
|
|
"Starting sat-rs demo application for the STM32F3-Discovery"
|
|
);
|
|
let mut gpioe = cx.device.GPIOE.split(&mut rcc.ahb);
|
|
|
|
let verif_reporter = VerificationReporterCore::new(PUS_APID).unwrap();
|
|
|
|
let leds = Leds::new(
|
|
gpioe.pe8,
|
|
gpioe.pe9,
|
|
gpioe.pe10,
|
|
gpioe.pe11,
|
|
gpioe.pe12,
|
|
gpioe.pe13,
|
|
gpioe.pe14,
|
|
gpioe.pe15,
|
|
&mut gpioe.moder,
|
|
&mut gpioe.otyper,
|
|
);
|
|
let mut gpioa = cx.device.GPIOA.split(&mut rcc.ahb);
|
|
// USART2 pins
|
|
let mut pins = (
|
|
// TX pin: PA2
|
|
gpioa
|
|
.pa2
|
|
.into_af_push_pull(&mut gpioa.moder, &mut gpioa.otyper, &mut gpioa.afrl),
|
|
// RX pin: PA3
|
|
gpioa
|
|
.pa3
|
|
.into_af_push_pull(&mut gpioa.moder, &mut gpioa.otyper, &mut gpioa.afrl),
|
|
);
|
|
pins.1.internal_pull_up(&mut gpioa.pupdr, true);
|
|
let mut usart2 = Serial::new(
|
|
cx.device.USART2,
|
|
pins,
|
|
UART_BAUD.Bd(),
|
|
clocks,
|
|
&mut rcc.apb1,
|
|
);
|
|
usart2.configure_rx_interrupt(RxEvent::Idle, Toggle::On);
|
|
// This interrupt is enabled to re-schedule new transfers in the interrupt handler immediately.
|
|
usart2.configure_tx_interrupt(TxEvent::TransmissionComplete, Toggle::On);
|
|
|
|
let dma1 = cx.device.DMA1.split(&mut rcc.ahb);
|
|
let (tx_serial, mut rx_serial) = usart2.split();
|
|
|
|
// This interrupt is immediately triggered, clear it. It will only be reset
|
|
// by the hardware when data is received on RX (RXNE event)
|
|
rx_serial.clear_event(RxEvent::Idle);
|
|
let rx_transfer = rx_serial.read_exact(unsafe { DMA_RX_BUF.as_mut_slice() }, dma1.ch6);
|
|
info!(target: "init", "Spawning tasks");
|
|
blink::spawn().unwrap();
|
|
serial_tx_handler::spawn().unwrap();
|
|
(
|
|
Shared {
|
|
tx_transfer: UartTxState::Idle(Some(TxIdle {
|
|
tx: tx_serial,
|
|
dma_channel: dma1.ch7,
|
|
})),
|
|
rx_transfer: Some(rx_transfer),
|
|
},
|
|
Local {
|
|
leds,
|
|
last_dir: Direction::North,
|
|
curr_dir: Direction::iter(),
|
|
verif_reporter,
|
|
},
|
|
init::Monotonics(mono),
|
|
)
|
|
}
|
|
|
|
#[task(local = [leds, curr_dir, last_dir])]
|
|
fn blink(cx: blink::Context) {
|
|
let toggle_leds = |dir: &Direction| {
|
|
let leds = cx.local.leds;
|
|
let last_led = leds.for_direction(*cx.local.last_dir);
|
|
last_led.off().ok();
|
|
let led = leds.for_direction(*dir);
|
|
led.on().ok();
|
|
*cx.local.last_dir = *dir;
|
|
};
|
|
|
|
match cx.local.curr_dir.next() {
|
|
Some(dir) => {
|
|
toggle_leds(dir);
|
|
}
|
|
None => {
|
|
*cx.local.curr_dir = Direction::iter();
|
|
toggle_leds(cx.local.curr_dir.next().unwrap());
|
|
}
|
|
}
|
|
blink::spawn_after(MsDuration::from_ticks(BLINK_FREQ_MS)).unwrap();
|
|
}
|
|
|
|
#[task(
|
|
shared = [tx_transfer],
|
|
local = []
|
|
)]
|
|
fn serial_tx_handler(mut cx: serial_tx_handler::Context) {
|
|
if let Some(vec) = TM_REQUESTS.dequeue() {
|
|
cx.shared.tx_transfer.lock(|tx_state| match tx_state {
|
|
UartTxState::Idle(tx) => {
|
|
//debug!(target: "serial_tx_handler", "bytes: {:x?}", &buf[0..len]);
|
|
// Safety: We only copy the data into the TX DMA buffer in this task.
|
|
// If the DMA is active, another branch will be taken.
|
|
let mut_tx_dma_buf = unsafe { &mut DMA_TX_BUF };
|
|
// 0 sentinel value as start marker
|
|
mut_tx_dma_buf[0] = 0;
|
|
// Should never panic, we accounted for the overhead.
|
|
// Write into transfer buffer directly, no need for intermediate
|
|
// encoding buffer.
|
|
let encoded_len = cobs::encode(&vec[0..vec.len()], &mut mut_tx_dma_buf[1..]);
|
|
// 0 end marker
|
|
mut_tx_dma_buf[encoded_len + 1] = 0;
|
|
//debug!(target: "serial_tx_handler", "Sending {} bytes", encoded_len + 2);
|
|
//debug!("sent: {:x?}", &mut_tx_dma_buf[0..encoded_len + 2]);
|
|
let tx_idle = tx.take().unwrap();
|
|
// Transfer completion and re-scheduling of new TX transfers will be done
|
|
// by the IRQ handler.
|
|
let transfer = tx_idle
|
|
.tx
|
|
.write_all(&mut_tx_dma_buf[0..encoded_len + 2], tx_idle.dma_channel);
|
|
*tx_state = UartTxState::Transmitting(Some(transfer));
|
|
// The memory block is automatically returned to the pool when it is dropped.
|
|
}
|
|
UartTxState::Transmitting(_) => {
|
|
// This is a SW configuration error. Only the ISR which
|
|
// detects transfer completion should be able to spawn a new
|
|
// task, and that ISR should set the state to IDLE.
|
|
panic!("invalid internal tx state detected")
|
|
}
|
|
})
|
|
} else {
|
|
cx.shared.tx_transfer.lock(|tx_state| {
|
|
if let UartTxState::Idle(_) = tx_state {
|
|
serial_tx_handler::spawn_after(MsDuration::from_ticks(TX_HANDLER_FREQ_MS))
|
|
.unwrap();
|
|
}
|
|
});
|
|
}
|
|
}
|
|
|
|
#[task(
|
|
local = [
|
|
stamp_buf: [u8; 7] = [0; 7],
|
|
decode_buf: [u8; MAX_TC_LEN] = [0; MAX_TC_LEN],
|
|
src_data_buf: [u8; MAX_TM_LEN] = [0; MAX_TM_LEN],
|
|
verif_reporter
|
|
],
|
|
)]
|
|
fn serial_rx_handler(cx: serial_rx_handler::Context, received_packet: Vec<u8, MAX_TC_LEN>) {
|
|
let tgt: &'static str = "serial_rx_handler";
|
|
cx.local.stamp_buf[0] = P_FIELD_BASE;
|
|
info!(target: tgt, "Received packet with {} bytes", received_packet.len());
|
|
let decode_buf = cx.local.decode_buf;
|
|
let packet = received_packet.as_slice();
|
|
let mut start_idx = None;
|
|
for (idx, byte) in packet.iter().enumerate() {
|
|
if *byte != 0 {
|
|
start_idx = Some(idx);
|
|
break;
|
|
}
|
|
}
|
|
if start_idx.is_none() {
|
|
warn!(
|
|
target: tgt,
|
|
"decoding error, can only process cobs encoded frames, data is all 0"
|
|
);
|
|
return;
|
|
}
|
|
let start_idx = start_idx.unwrap();
|
|
match cobs::decode(&received_packet.as_slice()[start_idx..], decode_buf) {
|
|
Ok(len) => {
|
|
info!(target: tgt, "Decoded packet length: {}", len);
|
|
let pus_tc = PusTcReader::new(decode_buf);
|
|
let verif_reporter = cx.local.verif_reporter;
|
|
match pus_tc {
|
|
Ok((tc, tc_len)) => handle_tc(
|
|
tc,
|
|
tc_len,
|
|
verif_reporter,
|
|
cx.local.src_data_buf,
|
|
cx.local.stamp_buf,
|
|
tgt,
|
|
),
|
|
Err(e) => {
|
|
warn!(target: tgt, "Error unpacking PUS TC: {}", e);
|
|
}
|
|
}
|
|
}
|
|
Err(_) => {
|
|
warn!(
|
|
target: tgt,
|
|
"decoding error, can only process cobs encoded frames"
|
|
)
|
|
}
|
|
}
|
|
}
|
|
|
|
fn handle_tc(
|
|
tc: PusTcReader,
|
|
tc_len: usize,
|
|
verif_reporter: &mut VerificationReporterCore,
|
|
src_data_buf: &mut [u8; MAX_TM_LEN],
|
|
stamp_buf: &[u8; 7],
|
|
tgt: &'static str,
|
|
) {
|
|
info!(
|
|
target: tgt,
|
|
"Found PUS TC [{},{}] with length {}",
|
|
tc.service(),
|
|
tc.subservice(),
|
|
tc_len
|
|
);
|
|
|
|
let token = verif_reporter.add_tc(&tc);
|
|
if tc.apid() != PUS_APID {
|
|
warn!(target: tgt, "Received tc with unknown APID {}", tc.apid());
|
|
let sendable = verif_reporter
|
|
.acceptance_failure(
|
|
src_data_buf,
|
|
token,
|
|
SEQ_COUNT_PROVIDER.get(),
|
|
0,
|
|
FailParams::new(stamp_buf, &EcssEnumU16::new(0), &[]),
|
|
)
|
|
.unwrap();
|
|
// let mem_block = poolmod::TM::alloc().unwrap().init([0u8; MAX_TM_LEN]);
|
|
let sender = TmSender::new(TmPacket::new(), tgt);
|
|
if let Err(e) = verif_reporter.send_acceptance_failure(sendable, &sender) {
|
|
warn!(target: tgt, "Sending acceptance failure failed: {:?}", e.0);
|
|
};
|
|
return;
|
|
}
|
|
let sendable = verif_reporter
|
|
.acceptance_success(src_data_buf, token, SEQ_COUNT_PROVIDER.get(), 0, stamp_buf)
|
|
.unwrap();
|
|
|
|
// let mem_block = poolmod::TM::alloc().unwrap().init([0u8; MAX_TM_LEN]);
|
|
let sender = TmSender::new(TmPacket::new(), tgt);
|
|
let accepted_token = match verif_reporter.send_acceptance_success(sendable, &sender) {
|
|
Ok(token) => token,
|
|
Err(e) => {
|
|
warn!(target: "serial_rx_handler", "Sending acceptance success failed: {:?}", e.0);
|
|
return;
|
|
}
|
|
};
|
|
|
|
if tc.service() == 17 {
|
|
if tc.subservice() == 1 {
|
|
let sendable = verif_reporter
|
|
.start_success(
|
|
src_data_buf,
|
|
accepted_token,
|
|
SEQ_COUNT_PROVIDER.get(),
|
|
0,
|
|
stamp_buf,
|
|
)
|
|
.unwrap();
|
|
// let mem_block = poolmod::TM::alloc().unwrap().init([0u8; MAX_TM_LEN]);
|
|
let sender = TmSender::new(TmPacket::new(), tgt);
|
|
let started_token = match verif_reporter.send_start_success(sendable, &sender) {
|
|
Ok(token) => token,
|
|
Err(e) => {
|
|
warn!(target: tgt, "Sending acceptance success failed: {:?}", e.0);
|
|
return;
|
|
}
|
|
};
|
|
info!(
|
|
target: tgt,
|
|
"Received PUS ping telecommand, sending ping reply TM[17,2]"
|
|
);
|
|
let mut sp_header =
|
|
SpHeader::tc_unseg(PUS_APID, SEQ_COUNT_PROVIDER.get(), 0).unwrap();
|
|
let sec_header = PusTmSecondaryHeader::new_simple(17, 2, stamp_buf);
|
|
let ping_reply = PusTmCreator::new(&mut sp_header, sec_header, &[], true);
|
|
let mut tm_packet = TmPacket::new();
|
|
tm_packet.resize(ping_reply.len_written(), 0)
|
|
.expect("vec resize failed");
|
|
ping_reply.write_to_bytes(&mut tm_packet).unwrap();
|
|
if TM_REQUESTS.enqueue(tm_packet).is_err() {
|
|
warn!(target: tgt, "TC queue full");
|
|
return;
|
|
}
|
|
SEQ_COUNT_PROVIDER.increment();
|
|
let sendable = verif_reporter
|
|
.completion_success(
|
|
src_data_buf,
|
|
started_token,
|
|
SEQ_COUNT_PROVIDER.get(),
|
|
0,
|
|
stamp_buf,
|
|
)
|
|
.unwrap();
|
|
// let mem_block = poolmod::TM::alloc().unwrap().init([0u8; MAX_TM_LEN]);
|
|
let sender = TmSender::new(TmPacket::new(), tgt);
|
|
if let Err(e) = verif_reporter.send_step_or_completion_success(sendable, &sender) {
|
|
warn!(target: tgt, "Sending completion success failed: {:?}", e.0);
|
|
}
|
|
} else {
|
|
// TODO: Invalid subservice
|
|
}
|
|
}
|
|
}
|
|
|
|
#[task(binds = DMA1_CH6, shared = [rx_transfer])]
|
|
fn rx_dma_isr(mut cx: rx_dma_isr::Context) {
|
|
cx.shared.rx_transfer.lock(|rx_transfer| {
|
|
let rx_ref = rx_transfer.as_ref().unwrap();
|
|
if rx_ref.is_complete() {
|
|
let uart_rx_owned = rx_transfer.take().unwrap();
|
|
let (buf, c, rx) = uart_rx_owned.stop();
|
|
// The received data is transferred to another task now to avoid any processing overhead
|
|
// during the interrupt. There are multiple ways to do this, we use a stack allocaed vector here
|
|
// to do this.
|
|
let mut tc_packet = TcPacket::new();
|
|
tc_packet.resize(buf.len(), 0).expect("vec resize failed");
|
|
tc_packet.copy_from_slice(buf);
|
|
|
|
// Start the next transfer as soon as possible.
|
|
*rx_transfer = Some(rx.read_exact(buf, c));
|
|
|
|
// Send the vector to a regular task.
|
|
serial_rx_handler::spawn(tc_packet).expect("spawning rx handler task failed");
|
|
// If this happens, there is a high chance that the maximum packet length was
|
|
// exceeded. Circular mode is not used here, so data might be missed.
|
|
warn!(
|
|
"rx transfer with maximum length {}, might miss data",
|
|
TC_BUF_LEN
|
|
);
|
|
}
|
|
});
|
|
}
|
|
|
|
#[task(binds = USART2_EXTI26, shared = [rx_transfer, tx_transfer])]
|
|
fn serial_isr(mut cx: serial_isr::Context) {
|
|
cx.shared.tx_transfer.lock(|tx_state| match tx_state {
|
|
UartTxState::Idle(_) => (),
|
|
UartTxState::Transmitting(transfer) => {
|
|
let transfer_ref = transfer.as_ref().unwrap();
|
|
if transfer_ref.is_complete() {
|
|
let transfer = transfer.take().unwrap();
|
|
let (_, dma_channel, tx) = transfer.stop();
|
|
*tx_state = UartTxState::Idle(Some(TxIdle { tx, dma_channel }));
|
|
serial_tx_handler::spawn_after(MsDuration::from_ticks(
|
|
MIN_DELAY_BETWEEN_TX_PACKETS_MS.into(),
|
|
))
|
|
.unwrap();
|
|
}
|
|
}
|
|
});
|
|
cx.shared.rx_transfer.lock(|rx_transfer| {
|
|
let rx_transfer_ref = rx_transfer.as_ref().unwrap();
|
|
// Received a partial packet.
|
|
if rx_transfer_ref.is_event_triggered(RxEvent::Idle) {
|
|
let rx_transfer_owned = rx_transfer.take().unwrap();
|
|
let (buf, ch, mut rx, rx_len) = rx_transfer_owned.stop_and_return_received_bytes();
|
|
// The received data is transferred to another task now to avoid any processing overhead
|
|
// during the interrupt. There are multiple ways to do this, we use a stack
|
|
// allocated vector to do this.
|
|
let mut tc_packet = TcPacket::new();
|
|
tc_packet
|
|
.resize(rx_len as usize, 0)
|
|
.expect("vec resize failed");
|
|
tc_packet[0..rx_len as usize].copy_from_slice(&buf[0..rx_len as usize]);
|
|
rx.clear_event(RxEvent::Idle);
|
|
// Only send owning pointer to pool memory and the received packet length.
|
|
serial_rx_handler::spawn(tc_packet).expect("spawning rx handler task failed");
|
|
*rx_transfer = Some(rx.read_exact(buf, ch));
|
|
}
|
|
});
|
|
}
|
|
}
|