Update to v0.2.0

- Added Button Abstraction
- Added Button IRQ example
- Updated va108xx_hal to v0.2.1, adapted API accordingly
- Fix for LED API: Now consumes individual pins instead of consuming the whole
  pin struct

Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "vorago-reb1"
-version = "0.1.1"
+version = "0.2.0"
 authors = ["Robin Mueller <robin.mueller.m@gmail.com>"]
 edition = "2021"
 description = "Board Support Crate for the Vorago REB1 development board"

examples/blinky-button-irq.rs

@@ -2,17 +2,124 @@
 #![no_main]
 #![no_std]
 
+use core::cell::{Cell, RefCell};
+
+use cortex_m::interrupt::Mutex;
 use cortex_m_rt::entry;
 use panic_halt as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va108xx_hal::pac::interrupt;
+use va108xx_hal::{
+    clock::{set_clk_div_register, FilterClkSel},
+    gpio::{FilterType, InterruptEdge, PinsA},
+    pac::{self, interrupt},
+    prelude::*,
+    time::Hertz,
+    timer::set_up_ms_timer,
+};
+use vorago_reb1::button::Button;
+use vorago_reb1::leds::Leds;
+
+static LEDS: Mutex<RefCell<Option<Leds>>> = Mutex::new(RefCell::new(None));
+static MS_COUNTER: Mutex<Cell<u32>> = Mutex::new(Cell::new(0));
+static BUTTON: Mutex<RefCell<Option<Button>>> = Mutex::new(RefCell::new(None));
+
+#[derive(Debug, PartialEq)]
+pub enum PressMode {
+    Toggle,
+    Keep,
+}
+
+// You can change the press mode here
+const PRESS_MODE: PressMode = PressMode::Keep;
 
 #[entry]
 fn main() -> ! {
     rtt_init_print!();
-    rprintln!("-- Vorago Button Blinky --");
+    rprintln!("-- Vorago Button IRQ Example --");
+    let mut dp = pac::Peripherals::take().unwrap();
+    let pinsa = PinsA::new(&mut dp.SYSCONFIG, Some(dp.IOCONFIG), dp.PORTA);
+    let edge_irq = match PRESS_MODE {
+        PressMode::Toggle => InterruptEdge::HighToLow,
+        PressMode::Keep => InterruptEdge::BothEdges,
+    };
+
+    // Configure an edge interrupt on the button and route it to interrupt vector 15
+    let mut button = Button::new(pinsa.pa11.into_floating_input()).edge_irq(
+        edge_irq,
+        Some(&mut dp.SYSCONFIG),
+        &mut dp.IRQSEL,
+        pac::interrupt::OC15,
+    );
+
+    if PRESS_MODE == PressMode::Toggle {
+        // This filter debounces the switch for edge based interrupts
+        button = button.filter_type(FilterType::FilterFourClockCycles, FilterClkSel::Clk1);
+        set_clk_div_register(
+            &mut dp.SYSCONFIG,
+            FilterClkSel::Clk1,
+            Hertz::from(50.khz()).0,
+        );
+    }
+
+    set_up_ms_timer(
+        &mut dp.SYSCONFIG,
+        &mut dp.IRQSEL,
+        50.mhz().into(),
+        dp.TIM0,
+        interrupt::OC0,
+    );
+    let mut leds = Leds::new(
+        pinsa.pa10.into_push_pull_output(),
+        pinsa.pa7.into_push_pull_output(),
+        pinsa.pa6.into_push_pull_output(),
+    );
+    for led in leds.iter_mut() {
+        led.off();
+    }
+    // Activate the IRQs so the processors sees them as well
+    unmask_irqs();
+    // Make both button and LEDs accessible from the IRQ handler as well
+    cortex_m::interrupt::free(|cs| {
+        LEDS.borrow(cs).replace(Some(leds));
+        BUTTON.borrow(cs).replace(Some(button));
+    });
     loop {}
 }
 
+fn unmask_irqs() {
+    unsafe {
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC0);
+        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC15);
+    }
+}
+
 #[interrupt]
-fn OC15() {}
+fn OC0() {
+    cortex_m::interrupt::free(|cs| {
+        let mut ms = MS_COUNTER.borrow(cs).get();
+        ms += 1;
+        MS_COUNTER.borrow(cs).set(ms);
+    });
+}
+
+#[interrupt]
+fn OC15() {
+    cortex_m::interrupt::free(|cs| {
+        if PRESS_MODE == PressMode::Toggle {
+            if let Some(ref mut leds) = LEDS.borrow(cs).borrow_mut().as_deref_mut() {
+                leds[0].toggle();
+            }
+        } else {
+            if let (Some(ref mut leds), Some(ref button)) = (
+                LEDS.borrow(cs).borrow_mut().as_deref_mut(),
+                BUTTON.borrow(cs).borrow().as_ref(),
+            ) {
+                if button.released() {
+                    leds[0].off();
+                } else {
+                    leds[0].on();
+                }
+            }
+        }
+    });
+}

examples/blinky-leds.rs

@@ -84,7 +84,12 @@ fn main() -> ! {
             }
         }
         LibType::Bsp => {
-            let mut leds = Leds::new(PinsA::new(&mut dp.SYSCONFIG, Some(dp.IOCONFIG), dp.PORTA));
+            let pinsa = PinsA::new(&mut dp.SYSCONFIG, Some(dp.IOCONFIG), dp.PORTA);
+            let mut leds = Leds::new(
+                pinsa.pa10.into_push_pull_output(),
+                pinsa.pa7.into_push_pull_output(),
+                pinsa.pa6.into_push_pull_output(),
+            );
             loop {
                 for _ in 0..10 {
                     // Blink all LEDs quickly

src/button.rs

@@ -0,0 +1,65 @@
+//! # API for the REB1 button
+//!
+//! ## Examples
+//!
+//! - [Button Blinky with Interrupts](https://github.com/robamu-org/vorago-reb1-rs/blob/main/examples/blinky-button-irq.rs)
+use va108xx_hal::{
+    gpio::{FilterClkSel, FilterType, InputFloating, InterruptEdge, InterruptLevel, Pin, PA11},
+    pac,
+    prelude::*,
+};
+
+pub struct Button {
+    button: Pin<PA11, InputFloating>,
+}
+
+impl Button {
+    pub fn new(pin: Pin<PA11, InputFloating>) -> Button {
+        Button { button: pin }
+    }
+
+    pub fn pressed(&self) -> bool {
+        self.button.is_low().ok().unwrap()
+    }
+
+    pub fn released(&self) -> bool {
+        self.button.is_high().ok().unwrap()
+    }
+
+    /// Configures an IRQ on edge.
+    ///
+    /// Please note that you still have to unpend the Cortex-M interrupt yourself
+    pub fn edge_irq(
+        mut self,
+        edge_type: InterruptEdge,
+        syscfg: Option<&mut pac::SYSCONFIG>,
+        irqsel: &mut pac::IRQSEL,
+        irq: pac::interrupt,
+    ) -> Self {
+        self.button = self.button.interrupt_edge(edge_type, syscfg, irqsel, irq);
+        self
+    }
+
+    /// Configures an IRQ on level.
+    ///
+    /// Please note that you still have to unpend the Cortex-M interrupt yourself
+    pub fn level_irq(
+        mut self,
+        level: InterruptLevel,
+        syscfg: Option<&mut pac::SYSCONFIG>,
+        irqsel: &mut pac::IRQSEL,
+        irq: pac::interrupt,
+    ) -> Self {
+        self.button = self.button.interrupt_level(level, syscfg, irqsel, irq);
+        self
+    }
+
+    /// Configures a filter on the button. This can be useful for debouncing the switch.
+    ///
+    /// Please note that you still have to set a clock divisor yourself using the
+    /// [`va108xx_hal::clock::set_clk_div_register`] function in order for this to work.
+    pub fn filter_type(mut self, filter: FilterType, clksel: FilterClkSel) -> Self {
+        self.button = self.button.filter_type(filter, clksel);
+        self
+    }
+}

src/leds.rs

@@ -1,6 +1,11 @@
+//! # API for using the REB1 LEDs
+//!
+//! ## Examples
+//!
+//! - [LED example](https://github.com/robamu-org/vorago-reb1-rs/blob/main/examples/blinky-leds.rs)
 use va108xx_hal::{
     gpio::dynpins::DynPin,
-    gpio::pins::{Pin, PinsA, PushPullOutput, PA10, PA6, PA7},
+    gpio::pins::{Pin, PushPullOutput, PA10, PA6, PA7},
     prelude::*,
 };
 
@@ -13,12 +18,9 @@ pub struct Leds {
 }
 
 impl Leds {
-    pub fn new(led_parts: PinsA) -> Self {
+    pub fn new(led_pin1: LD2, led_pin2: LD3, led_pin3: LD4) -> Leds {
-        let led2 = led_parts.pa10.into_push_pull_output();
-        let led3 = led_parts.pa7.into_push_pull_output();
-        let led4 = led_parts.pa6.into_push_pull_output();
         Leds {
-            leds: [led2.into(), led3.into(), led4.into()],
+            leds: [led_pin1.into(), led_pin2.into(), led_pin3.into()],
         }
     }
 }
@@ -72,14 +74,14 @@ macro_rules! ctor {
 ctor!(LD2, LD3, LD4);
 
 impl Led {
-    /// Turns the LED off
+    /// Turns the LED off. Setting the pin high actually turns the LED off
     pub fn off(&mut self) {
-        self.pin.set_low().ok();
+        self.pin.set_high().ok();
     }
 
-    /// Turns the LED on
+    /// Turns the LED on. Setting the pin low actually turns the LED on
     pub fn on(&mut self) {
-        self.pin.set_high().ok();
+        self.pin.set_low().ok();
     }
 
     /// Toggles the LED

src/lib.rs

@@ -1,3 +1,4 @@
 #![no_std]
 
+pub mod button;
 pub mod leds;