CHANGELOG.md

@@ -8,6 +8,10 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
+## [v0.3.2]
+
+- Bump HAL dependency to v0.5.0. Changed API, especially for IRQ handling
+
 ## [v0.3.1]
 
 - Updated ADC code and dependency

Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "vorago-reb1"
-version = "0.3.1"
+version = "0.3.2"
 authors = ["Robin Mueller <robin.mueller.m@gmail.com>"]
 edition = "2021"
 description = "Board Support Crate for the Vorago REB1 development board"
@@ -18,7 +18,7 @@ dummy-pin = "0.1.1"
 max116xx-10bit = "0.2.1"
 
 [dependencies.va108xx-hal]
-version = "0.4.3"
+version = "0.5.0"
 features = ["rt"]
 
 [features]

examples/adt75-temp-sensor.rs

@@ -3,11 +3,7 @@
 use cortex_m_rt::entry;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va108xx_hal::{
+use va108xx_hal::{pac, prelude::*, timer::set_up_ms_delay_provider};
-    pac::{self, interrupt},
-    prelude::*,
-    timer::{default_ms_irq_handler, set_up_ms_timer, Delay},
-};
 use vorago_reb1::temp_sensor::Adt75TempSensor;
 
 #[entry]
@@ -15,14 +11,7 @@ fn main() -> ! {
     rtt_init_print!();
     rprintln!("-- Vorago Temperature Sensor and I2C Example --");
     let mut dp = pac::Peripherals::take().unwrap();
-    let tim0 = set_up_ms_timer(
+    let mut delay = set_up_ms_delay_provider(&mut dp.SYSCONFIG, 50.mhz(), dp.TIM0);
-        &mut dp.SYSCONFIG,
-        &mut dp.IRQSEL,
-        50.mhz().into(),
-        dp.TIM0,
-        interrupt::OC0,
-    );
-    let mut delay = Delay::new(tim0);
     unsafe {
         cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC0);
     }
@@ -34,11 +23,6 @@ fn main() -> ! {
             .read_temperature()
             .expect("Failed reading temperature");
         rprintln!("Temperature in Celcius: {}", temp);
-        delay.delay_ms(500);
+        delay.delay_ms(500_u16);
     }
 }
-
-#[interrupt]
-fn OC0() {
-    default_ms_irq_handler();
-}

examples/adxl343-accelerometer.rs

@@ -10,10 +10,10 @@ use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
 use va108xx_hal::{
     gpio::PinsA,
-    pac::{self, interrupt},
+    pac,
     prelude::*,
     spi::{Spi, SpiConfig, TransferConfig},
-    timer::{default_ms_irq_handler, set_up_ms_timer, Delay},
+    timer::set_up_ms_delay_provider,
 };
 
 const READ_MASK: u8 = 1 << 7;
@@ -28,18 +28,7 @@ fn main() -> ! {
     rtt_init_print!();
     rprintln!("-- Vorago Accelerometer Example --");
     let mut dp = pac::Peripherals::take().unwrap();
-    let tim0 = set_up_ms_timer(
+    let mut delay = set_up_ms_delay_provider(&mut dp.SYSCONFIG, 50.mhz(), dp.TIM0);
-        &mut dp.SYSCONFIG,
-        &mut dp.IRQSEL,
-        50.mhz().into(),
-        dp.TIM0,
-        interrupt::OC0,
-    );
-    let mut delay = Delay::new(tim0);
-    unsafe {
-        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC0);
-    }
-
     let pinsa = PinsA::new(&mut dp.SYSCONFIG, None, dp.PORTA);
     let spi_cfg = SpiConfig::default();
     let (sck, mosi, miso) = (
@@ -78,12 +67,7 @@ fn main() -> ! {
         .expect("Enabling measurement mode failed");
 
     loop {
-        delay.delay_ms(500);
+        delay.delay_ms(500_u16);
         unimplemented!("Not implemented for now, is not populated on the board..");
     }
 }
-
-#[interrupt]
-fn OC0() {
-    default_ms_irq_handler();
-}

examples/blinky-button-irq.rs

@@ -14,7 +14,7 @@ use va108xx_hal::{
     pac::{self, interrupt},
     prelude::*,
     time::Hertz,
-    timer::{default_ms_irq_handler, set_up_ms_timer},
+    timer::{default_ms_irq_handler, set_up_ms_timer, IrqCfg},
 };
 use vorago_reb1::button::Button;
 use vorago_reb1::leds::Leds;
@@ -45,9 +45,9 @@ fn main() -> ! {
     // Configure an edge interrupt on the button and route it to interrupt vector 15
     let mut button = Button::new(pinsa.pa11.into_floating_input()).edge_irq(
         edge_irq,
+        IrqCfg::new(pac::interrupt::OC15, true, true),
         Some(&mut dp.SYSCONFIG),
-        &mut dp.IRQSEL,
+        Some(&mut dp.IRQSEL),
-        pac::interrupt::OC15,
     );
 
     if PRESS_MODE == PressMode::Toggle {
@@ -61,11 +61,11 @@ fn main() -> ! {
     }
 
     set_up_ms_timer(
+        IrqCfg::new(pac::Interrupt::OC0, true, true),
         &mut dp.SYSCONFIG,
-        &mut dp.IRQSEL,
+        Some(&mut dp.IRQSEL),
-        50.mhz().into(),
+        50.mhz(),
         dp.TIM0,
-        interrupt::OC0,
     );
     let mut leds = Leds::new(
         pinsa.pa10.into_push_pull_output(),
@@ -75,8 +75,6 @@ fn main() -> ! {
     for led in leds.iter_mut() {
         led.off();
     }
-    // Activate the IRQs so the processors sees them as well
-    unmask_irqs();
     // Make both button and LEDs accessible from the IRQ handler as well
     cortex_m::interrupt::free(|cs| {
         LEDS.borrow(cs).replace(Some(leds));
@@ -85,13 +83,6 @@ fn main() -> ! {
     loop {}
 }
 
-fn unmask_irqs() {
-    unsafe {
-        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC0);
-        cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC15);
-    }
-}
-
 #[interrupt]
 fn OC0() {
     default_ms_irq_handler();

examples/blinky-button-rtic.rs

@@ -9,10 +9,10 @@ mod app {
     use va108xx_hal::{
         clock::{set_clk_div_register, FilterClkSel},
         gpio::{FilterType, InterruptEdge, PinsA},
-        pac::{self, interrupt},
+        pac,
         prelude::*,
         time::Hertz,
-        timer::{default_ms_irq_handler, set_up_ms_timer},
+        timer::{default_ms_irq_handler, set_up_ms_timer, IrqCfg},
     };
     use vorago_reb1::button::Button;
     use vorago_reb1::leds::Leds;
@@ -66,9 +66,9 @@ mod app {
         // Configure an edge interrupt on the button and route it to interrupt vector 15
         let mut button = Button::new(pinsa.pa11.into_floating_input()).edge_irq(
             edge_irq,
+            IrqCfg::new(pac::interrupt::OC15, true, true),
             Some(&mut dp.SYSCONFIG),
-            &mut dp.IRQSEL,
+            Some(&mut dp.IRQSEL),
-            pac::interrupt::OC15,
         );
 
         if mode == PressMode::Toggle {
@@ -80,14 +80,6 @@ mod app {
                 Hertz::from(50.khz()).0,
             );
         }
-
-        set_up_ms_timer(
-            &mut dp.SYSCONFIG,
-            &mut dp.IRQSEL,
-            50.mhz().into(),
-            dp.TIM0,
-            interrupt::OC0,
-        );
         let mut leds = Leds::new(
             pinsa.pa10.into_push_pull_output(),
             pinsa.pa7.into_push_pull_output(),
@@ -96,8 +88,13 @@ mod app {
         for led in leds.iter_mut() {
             led.off();
         }
-        // Activate the IRQs so the processors sees them as well
+        set_up_ms_timer(
-        unmask_irqs();
+            IrqCfg::new(pac::Interrupt::OC0, true, true),
+            &mut dp.SYSCONFIG,
+            Some(&mut dp.IRQSEL),
+            50.mhz(),
+            dp.TIM0,
+        );
         (Shared {}, Local { leds, button, mode }, init::Monotonics())
     }
 
@@ -128,13 +125,6 @@ mod app {
         default_ms_irq_handler();
     }
 
-    fn unmask_irqs() {
-        unsafe {
-            cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC0);
-            cortex_m::peripheral::NVIC::unmask(pac::Interrupt::OC15);
-        }
-    }
-
     fn prompt_mode(mut down_channel: rtt_target::DownChannel) -> PressMode {
         rprintln!("Using prompt mode");
         rprintln!("Please enter the mode [0: Toggle, 1: Keep]");

examples/blinky-leds.rs

@@ -9,7 +9,7 @@
 use cortex_m_rt::entry;
 use embedded_hal::digital::v2::ToggleableOutputPin;
 use panic_halt as _;
-use va108xx_hal::{gpio::pins::PinsA, pac, prelude::*, timer::set_up_ms_timer};
+use va108xx_hal::{gpio::pins::PinsA, pac, prelude::*, timer::set_up_ms_delay_provider};
 use vorago_reb1::leds::Leds;
 
 // REB LED pin definitions. All on port A
@@ -64,13 +64,7 @@ fn main() -> ! {
             let mut led1 = pins.pa10.into_push_pull_output();
             let mut led2 = pins.pa7.into_push_pull_output();
             let mut led3 = pins.pa6.into_push_pull_output();
-            let mut delay = set_up_ms_timer(
+            let mut delay = set_up_ms_delay_provider(&mut dp.SYSCONFIG, 50.mhz(), dp.TIM0);
-                &mut dp.SYSCONFIG,
-                &mut dp.IRQSEL,
-                50.mhz().into(),
-                dp.TIM0,
-                pac::Interrupt::OC0,
-            );
             for _ in 0..10 {
                 led1.set_low().ok();
                 led2.set_low().ok();
@@ -97,13 +91,7 @@ fn main() -> ! {
                 pinsa.pa7.into_push_pull_output(),
                 pinsa.pa6.into_push_pull_output(),
             );
-            let mut delay = set_up_ms_timer(
+            let mut delay = set_up_ms_delay_provider(&mut dp.SYSCONFIG, 50.mhz(), dp.TIM0);
-                &mut dp.SYSCONFIG,
-                &mut dp.IRQSEL,
-                50.mhz().into(),
-                dp.TIM0,
-                pac::Interrupt::OC0,
-            );
             loop {
                 for _ in 0..10 {
                     // Blink all LEDs quickly

examples/max11619-adc.rs

@@ -1,6 +1,7 @@
 //! MAX11619 ADC example applikcation
 #![no_main]
 #![no_std]
+
 use cortex_m_rt::entry;
 use embedded_hal::{blocking::delay::DelayUs, spi};
 use max116xx_10bit::VoltageRefMode;
@@ -13,7 +14,7 @@ use va108xx_hal::{
     pac::{self, interrupt, SPIB},
     prelude::*,
     spi::{Spi, SpiBase, SpiConfig, TransferConfig},
-    timer::{default_ms_irq_handler, set_up_ms_timer, Delay},
+    timer::{default_ms_irq_handler, set_up_ms_timer, Delay, IrqCfg},
     utility::{port_mux, Funsel, PortSel},
 };
 use vorago_reb1::max11619::{
@@ -44,7 +45,7 @@ pub enum MuxMode {
 
 const EXAMPLE_MODE: ExampleMode = ExampleMode::NotUsingEoc;
 const READ_MODE: ReadMode = ReadMode::Multiple;
-const MUX_MODE: MuxMode = MuxMode::PortB19to17;
+const MUX_MODE: MuxMode = MuxMode::None;
 
 #[entry]
 fn main() -> ! {
@@ -53,11 +54,11 @@ fn main() -> ! {
 
     let mut dp = pac::Peripherals::take().unwrap();
     let tim0 = set_up_ms_timer(
+        IrqCfg::new(pac::Interrupt::OC0, true, true),
         &mut dp.SYSCONFIG,
-        &mut dp.IRQSEL,
+        Some(&mut dp.IRQSEL),
-        50.mhz().into(),
+        50.mhz(),
         dp.TIM0,
-        interrupt::OC0,
     );
     let delay = Delay::new(tim0);
     unsafe {

src/button.rs

@@ -8,6 +8,7 @@ use va108xx_hal::{
     gpio::{FilterClkSel, FilterType, InputFloating, InterruptEdge, InterruptLevel, Pin, PA11},
     pac,
     prelude::*,
+    utility::IrqCfg,
 };
 
 pub struct Button {
@@ -28,30 +29,28 @@ impl Button {
     }
 
     /// Configures an IRQ on edge.
-    ///
-    /// Please note that you still have to unpend the Cortex-M interrupt yourself
     pub fn edge_irq(
         mut self,
         edge_type: InterruptEdge,
+        irq_cfg: IrqCfg,
         syscfg: Option<&mut pac::SYSCONFIG>,
-        irqsel: &mut pac::IRQSEL,
+        irqsel: Option<&mut pac::IRQSEL>,
-        irq: pac::interrupt,
     ) -> Self {
-        self.button = self.button.interrupt_edge(edge_type, syscfg, irqsel, irq);
+        self.button = self
+            .button
+            .interrupt_edge(edge_type, irq_cfg, syscfg, irqsel);
         self
     }
 
     /// Configures an IRQ on level.
-    ///
-    /// Please note that you still have to unpend the Cortex-M interrupt yourself
     pub fn level_irq(
         mut self,
         level: InterruptLevel,
+        irq_cfg: IrqCfg,
         syscfg: Option<&mut pac::SYSCONFIG>,
-        irqsel: &mut pac::IRQSEL,
+        irqsel: Option<&mut pac::IRQSEL>,
-        irq: pac::interrupt,
     ) -> Self {
-        self.button = self.button.interrupt_level(level, syscfg, irqsel, irq);
+        self.button = self.button.interrupt_level(level, irq_cfg, syscfg, irqsel);
         self
     }