updated readme
This commit is contained in:
parent
48620b1f91
commit
fe5ee0434f
147
README.md
147
README.md
@ -171,64 +171,23 @@ from machine to machine.
|
||||
4. Run build command by double clicking the created target or by right clicking
|
||||
the project folder and selecting Build Project.
|
||||
|
||||
## Debugging the software (when workstation is directly conncected to Q7S)
|
||||
## TCF-Agent
|
||||
|
||||
1. Assign static IP address to Q7S
|
||||
* Open serial console of Q7S (Accessible via the micro-USB of the PIM, see also Q7S user maunal chapter 10.3)
|
||||
* Baudrate 115200
|
||||
* Login to Q7S:
|
||||
* user: root
|
||||
* pw: root
|
||||
* Set IP address and netmask with
|
||||
|
||||
```sh
|
||||
1. On reboot, some steps have to be taken on the Q7S. Set static IP address and netmask
|
||||
|
||||
```sh
|
||||
ifconfig eth0 192.168.133.10
|
||||
ifconfig eth0 netmask 255.255.255.0
|
||||
```
|
||||
|
||||
2. Connect Q7S to workstation via ethernet
|
||||
3. Make sure the netmask of the ehternet interface of the workstation matches the netmask of the Q7S
|
||||
* When IP address is set to 192.168.133.10 and the netmask is 255.255.255.0, an example IP address for the workstation
|
||||
is 192.168.133.2
|
||||
4. Run tcf-agent on Q7S
|
||||
2. `tcfagent` application should run automatically but this can be checked with
|
||||
```sh
|
||||
systemctl status tcfagent
|
||||
```
|
||||
|
||||
* Tcf-agent is not yet integrated in the rootfs of the Q7S. Therefore build tcf-agent manually
|
||||
|
||||
```sh
|
||||
git clone git://git.eclipse.org/gitroot/tcf/org.eclipse.tcf.agent.git
|
||||
cd org.eclipse.tcf.agent/agent
|
||||
make CC=arm-linux-gnueabihf-gcc LD=arm-linux-gnueabihf-ld MACHINE=arm NO_SSL=1 NO_UUID=1
|
||||
```
|
||||
|
||||
* Transfer executable agent from org.eclipse.tcf.agent/agent/obj/GNU/Linux/arm/Debug to /tmp of Q7S
|
||||
|
||||
```sh
|
||||
cd obj/GNU/Linux/arm/Debug
|
||||
scp agent root@192.168.133.10:/tmp
|
||||
```
|
||||
|
||||
* On Q7S
|
||||
```sh
|
||||
cd /tmp
|
||||
chmod +x agent
|
||||
```
|
||||
|
||||
* Run agent
|
||||
```sh
|
||||
./agent
|
||||
```
|
||||
|
||||
5. In Xilinx SDK 2018.2 right click on project → Debug As → Debug Configurations
|
||||
6. Right click Xilinx C/C++ applicaton (System Debugger) → New →
|
||||
7. Set Debug Type to Linux Application Debug and Connectin to Linux Agent
|
||||
8. Click New
|
||||
9. Give connection a name
|
||||
10. Set Host to static IP address of Q7S. e.g. 192.168.133.10
|
||||
11. Test connection (This ensures the TCF Agent is running on the Q7S)
|
||||
12. Select Application tab
|
||||
* Project Name: eive_obsw
|
||||
* Local File Path: Path to eiveobsw-linux.elf (in _bin\linux\devel)
|
||||
* Remote File Path: /tmp/eive_obsw.elf
|
||||
3. If the agent is not running, check whether `agent` is located inside `usr/bin`.
|
||||
You can run it manually there. To perform auto-start on boot, have a look at the start-up
|
||||
application section.
|
||||
|
||||
## Debugging the software via Flatsat PC
|
||||
|
||||
@ -249,6 +208,9 @@ To access the console of the Q7S run the following:
|
||||
picocom -b 115200 /dev/ttyUSB0
|
||||
```
|
||||
|
||||
If the serial port is blocked for some reason, you can kill
|
||||
the process using it with `q7s_kill`.
|
||||
|
||||
You can use `AltGr` + `X` to exit the picocom session.
|
||||
|
||||
To debug an application, first make sure a static IP address is assigned to the Q7S. Run ifconfig on the Q7S serial console.
|
||||
@ -278,9 +240,19 @@ Note: When now setting up a debug session in the Xilinx SDK, the host must be se
|
||||
|
||||
## Transfering files via SCP
|
||||
|
||||
To transfer files from the local machine to the Q7S, use port forwarding
|
||||
|
||||
```sh
|
||||
ssh -L 1535:192.168.133.10:22 eive@2001:7c0:2018:1099:babe:0:e1fe:f1a5
|
||||
```
|
||||
|
||||
## Launching an application after boot
|
||||
Then you can copy an `example` file like this
|
||||
|
||||
```sh
|
||||
scp -P 1535 example root@localhost:/tmp
|
||||
```
|
||||
|
||||
## Launching an application at start-up
|
||||
|
||||
Load the root partiton from the flash memory (there are to nor-flash memories and each flash holds two xdi images).
|
||||
Note: It is not possible to modify the currently loaded root partition, e.g. creating directories. To do this,
|
||||
@ -299,7 +271,8 @@ the parition needs to be mounted.
|
||||
```
|
||||
The mounted partition will be located inside the `/tmp` folder
|
||||
|
||||
3. Copy the executable to /bin/usr
|
||||
3. Copy the executable to `/usr/bin`
|
||||
|
||||
4. Make sure the permissions to execute the application are set
|
||||
```sh
|
||||
chmod +x application
|
||||
@ -344,11 +317,13 @@ the parition needs to be mounted.
|
||||
More detailed information about the used q7s commands can be found in the Q7S user manual.
|
||||
|
||||
### Bringing up CAN
|
||||
````
|
||||
ip link set can0 down
|
||||
ip link set can0 type can loopback off
|
||||
ip link set can0 up type can bitrate 1000000
|
||||
````
|
||||
|
||||
```sh
|
||||
ip link set can0 down
|
||||
ip link set can0 type can loopback off
|
||||
ip link set can0 up type can bitrate 1000000
|
||||
```
|
||||
|
||||
Following command sends 8 bytes to device with id 99 (for petalinux)
|
||||
````
|
||||
cansend can0 -i99 99 88 77 11 33 11 22 99
|
||||
@ -470,3 +445,57 @@ p60-dock # param get out_en[0]
|
||||
GET out_en[0] = 1
|
||||
````
|
||||
|
||||
## Debugging the software (when workstation is directly conncected to Q7S)
|
||||
|
||||
1. Assign static IP address to Q7S
|
||||
* Open serial console of Q7S (Accessible via the micro-USB of the PIM, see also Q7S user maunal chapter 10.3)
|
||||
* Baudrate 115200
|
||||
* Login to Q7S:
|
||||
* user: root
|
||||
* pw: root
|
||||
|
||||
2. Connect Q7S to workstation via ethernet
|
||||
3. Make sure the netmask of the ehternet interface of the workstation matches the netmask of the Q7S
|
||||
* When IP address is set to 192.168.133.10 and the netmask is 255.255.255.0, an example IP address for the workstation
|
||||
is 192.168.133.2
|
||||
|
||||
4. Run tcf-agent on Q7S
|
||||
|
||||
* Tcf-agent is not yet integrated in the rootfs of the Q7S. Therefore build tcf-agent manually
|
||||
|
||||
```sh
|
||||
git clone git://git.eclipse.org/gitroot/tcf/org.eclipse.tcf.agent.git
|
||||
cd org.eclipse.tcf.agent/agent
|
||||
make CC=arm-linux-gnueabihf-gcc LD=arm-linux-gnueabihf-ld MACHINE=arm NO_SSL=1 NO_UUID=1
|
||||
```
|
||||
|
||||
* Transfer executable agent from org.eclipse.tcf.agent/agent/obj/GNU/Linux/arm/Debug to /tmp of Q7S
|
||||
|
||||
```sh
|
||||
cd obj/GNU/Linux/arm/Debug
|
||||
scp agent root@192.168.133.10:/tmp
|
||||
```
|
||||
|
||||
* On Q7S
|
||||
```sh
|
||||
cd /tmp
|
||||
chmod +x agent
|
||||
```
|
||||
|
||||
* Run agent
|
||||
```sh
|
||||
./agent
|
||||
```
|
||||
|
||||
5. In Xilinx SDK 2018.2 right click on project → Debug As → Debug Configurations
|
||||
6. Right click Xilinx C/C++ applicaton (System Debugger) → New →
|
||||
7. Set Debug Type to Linux Application Debug and Connectin to Linux Agent
|
||||
8. Click New
|
||||
9. Give connection a name
|
||||
10. Set Host to static IP address of Q7S. e.g. 192.168.133.10
|
||||
11. Test connection (This ensures the TCF Agent is running on the Q7S)
|
||||
12. Select Application tab
|
||||
* Project Name: eive_obsw
|
||||
* Local File Path: Path to eiveobsw-linux.elf (in _bin\linux\devel)
|
||||
* Remote File Path: /tmp/eive_obsw.elf
|
||||
|
||||
|
||||
@ -43,7 +43,7 @@ void InitMission::initTasks(){
|
||||
/* TMTC Distribution */
|
||||
PeriodicTaskIF* TmTcDistributor = TaskFactory::instance()->
|
||||
createPeriodicTask("DIST", 40, PeriodicTaskIF::MINIMUM_STACK_SIZE,
|
||||
0.100, nullptr);
|
||||
0.2, nullptr);
|
||||
ReturnValue_t result = TmTcDistributor->addComponent(
|
||||
objects::CCSDS_PACKET_DISTRIBUTOR);
|
||||
if(result!=HasReturnvaluesIF::RETURN_OK){
|
||||
@ -169,6 +169,7 @@ void InitMission::initTasks(){
|
||||
PusMedPrio->startTask();
|
||||
PusLowPrio->startTask();
|
||||
|
||||
|
||||
// P60DockTask->startTask();
|
||||
|
||||
#if OBSW_ADD_TEST_CODE == 1
|
||||
|
||||
@ -142,7 +142,7 @@ csp_iface_t * csp_can_socketcan_init(const char * ifc, int bitrate, int promisc)
|
||||
struct sockaddr_can addr;
|
||||
pthread_t rx_thread;
|
||||
|
||||
printf("Init can interface %s\n", ifc);
|
||||
printf("-I-: Initiating CAN interface %s\n", ifc);
|
||||
|
||||
#ifdef CSP_HAVE_LIBSOCKETCAN
|
||||
/* Set interface up */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user