eive-tmtc/pus_tc/devs/p60dock.py

# -*- coding: utf-8 -*-
"""
@file   tmtcc_tc_p60dock.py
@brief  P60 Dock tests
@author J. Meier
@date   13.12.2020
"""
from tmtccmd.config.definitions import QueueCommands
from tmtccmd.tc.packer import TcQueueT
from tmtccmd.tc.service_3_housekeeping import generate_one_hk_command, make_sid
from gomspace.gomspace_common import *
from config.object_ids import P60_DOCK_HANDLER


class P60OpCodes(enum.Enum):
    TEST = "0"
    STACK_3V3_ON = "1"
    STACK_3V3_OFF = "2"
    STACK_5V_ON = "3"
    STACK_5V_OFF = "4"


class P60DockTestProcedure:
    """
    @brief  Use this class to define the tests to perform for the P60Dock.
    @details    Setting all to True will run all tests.
                Setting all to False will only run the tests set to True.
    """

    all = False
    reboot = False
    read_gnd_wdt = False
    gnd_wdt_reset = False
    ping = False
    channel_3_off = False  # pdu2
    read_temperature1 = False
    read_channel_3_state = False  # pdu2
    read_cur_lu_lim_0 = False
    channel_3_on = False  # pdu2
    invalid_table_id_test = (
        False  # Test to check if software properly handles invalid table ids
    )
    invalid_address_test = (
        False  # Test to check if software properly handles invalid addresses
    )
    invalid_parameter_size_test = False


class P60DockConfigTable:
    out_en_0 = TableEntry(bytearray([0x00, 0x68]), TableEntry.uint8_size)  # ACU VCC
    out_en_1 = TableEntry(bytearray([0x00, 0x69]), TableEntry.uint8_size)  # PDU1 VCC
    out_en_2 = TableEntry(bytearray([0x00, 0x6A]), TableEntry.uint8_size)  # unused
    out_en_3 = TableEntry(bytearray([0x00, 0x6B]), TableEntry.uint8_size)  # PDU2 VCC
    out_en_4 = TableEntry(bytearray([0x00, 0x6C]), TableEntry.uint8_size)  # ACU VBAT
    out_en_5 = TableEntry(bytearray([0x00, 0x6D]), TableEntry.uint8_size)  # unused
    out_en_6 = TableEntry(bytearray([0x00, 0x6E]), TableEntry.uint8_size)  # PDU1 VBAT
    out_en_7 = TableEntry(bytearray([0x00, 0x6F]), TableEntry.uint8_size)  # PDU2 VBAT
    out_en_8 = TableEntry(bytearray([0x00, 0x70]), TableEntry.uint8_size)  # Stack VBAT
    out_en_9 = TableEntry(bytearray([0x00, 0x71]), TableEntry.uint8_size)  # Stack 3V3
    out_en_10 = TableEntry(bytearray([0x00, 0x72]), TableEntry.uint8_size)  # Stack 5V
    out_en_11 = TableEntry(
        bytearray([0x00, 0x73]), TableEntry.uint8_size
    )  # GS 3V3 (unused)
    out_en_12 = TableEntry(
        bytearray([0x00, 0x74]), TableEntry.uint8_size
    )  # GS 5V (unused)
    # When channel consumes more than cur_lu_lim, channel is turned of immediately
    cur_lu_lim_0 = TableEntry(bytearray([0x00, 0xF8]), TableEntry.uint16_size)


class P60DockHkTable:
    temperature1 = TableEntry(bytearray([0x00, 0x44]), TableEntry.uint16_size)
    temperature2 = TableEntry(bytearray([0x00, 0x46]), TableEntry.uint16_size)
    # Ground WDT value (remaining seconds until reboot)
    wdt_gnd_left = TableEntry(bytearray([0x00, 0xA8]), TableEntry.uint32_size)


def pack_p60dock_test_into(object_id: bytearray, tc_queue: TcQueueT, op_code: str):
    if op_code == P60OpCodes.STACK_3V3_ON.value:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Turning stack 3V3 on"))
        command = pack_set_param_command(
            object_id,
            P60DockConfigTable.out_en_9.parameter_address,
            P60DockConfigTable.out_en_9.parameter_size,
            Channel.on,
        )
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == P60OpCodes.STACK_3V3_OFF.value:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Turning stack 3V3 off"))
        command = pack_set_param_command(
            object_id,
            P60DockConfigTable.out_en_9.parameter_address,
            P60DockConfigTable.out_en_9.parameter_size,
            Channel.off,
        )
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == P60OpCodes.STACK_5V_ON.value:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Turning stack 5V on"))
        command = pack_set_param_command(
            object_id,
            P60DockConfigTable.out_en_10.parameter_address,
            P60DockConfigTable.out_en_10.parameter_size,
            Channel.on,
        )
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == P60OpCodes.STACK_5V_OFF.value:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Turning stack 5V off"))
        command = pack_set_param_command(
            object_id,
            P60DockConfigTable.out_en_10.parameter_address,
            P60DockConfigTable.out_en_10.parameter_size,
            Channel.off,
        )
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == GomspaceOpCodes.REQUEST_HK_ONCE.value:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Requesting HK Table Once"))
        hk_sid = make_sid(object_id=P60_DOCK_HANDLER, set_id=SetIds.P60_DOCK)
        command = generate_one_hk_command(sid=hk_sid, ssc=0)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == GomspaceOpCodes.PRINT_SWITCH_V_I.value:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Print Switches, Voltages, Currents")
        )
        command = generate_action_command(
            object_id=object_id, action_id=GomspaceDeviceActionIds.PRINT_SWITCH_V_I
        )
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == GomspaceOpCodes.PRINT_LATCHUPS.value:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Print Latchups"))
        command = generate_action_command(
            object_id=object_id, action_id=GomspaceDeviceActionIds.PRINT_LATCHUPS
        )
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.reboot:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Reboot"))
        command = pack_reboot_command(object_id)
        # command = PusTelecommand(service=8, subservice=128, ssc=22, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.read_gnd_wdt:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Reading ground watchdog timer value")
        )
        command = pack_get_param_command(
            object_id,
            TableIds.hk,
            P60DockHkTable.wdt_gnd_left.parameter_address,
            P60DockHkTable.wdt_gnd_left.parameter_size,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=20, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.gnd_wdt_reset:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Testing ground watchdog reset")
        )
        command = pack_gnd_wdt_reset_command(object_id)
        # command = PusTelecommand(service=8, subservice=128, ssc=21, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.ping:
        tc_queue.appendleft((QueueCommands.PRINT, "P60 Dock: Ping"))
        ping_data = bytearray([0, 1, 2, 3, 4, 5, 6, 7, 8, 9])
        command = pack_ping_command(object_id, ping_data)
        # command = PusTelecommand(service=8, subservice=128, ssc=22, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.channel_3_off:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Testing setting output channel 3 off")
        )
        parameter = 0  # set channel off
        command = pack_set_param_command(
            object_id,
            P60DockConfigTable.out_en_3.parameter_address,
            P60DockConfigTable.out_en_3.parameter_size,
            parameter,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=23, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.read_temperature1:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Testing temperature reading")
        )
        command = pack_get_param_command(
            object_id,
            TableIds.hk,
            P60DockHkTable.temperature1.parameter_address,
            P60DockHkTable.temperature1.parameter_size,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=24, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.channel_3_on:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Testing  Output Channel 3 state (PDU2)")
        )
        command = pack_get_param_command(
            object_id,
            TableIds.config,
            P60DockConfigTable.out_en_3.parameter_address,
            P60DockConfigTable.out_en_3.parameter_size,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=25, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.read_cur_lu_lim_0:
        tc_queue.appendleft(
            (
                QueueCommands.PRINT,
                "P60 Dock: Reading current limit value of  output channel 0",
            )
        )
        command = pack_get_param_command(
            object_id,
            TableIds.config,
            P60DockConfigTable.cur_lu_lim_0.parameter_address,
            P60DockConfigTable.cur_lu_lim_0.parameter_size,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=26, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.channel_3_on:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Testing setting output channel 3 on")
        )
        parameter = 1  # set channel on
        command = pack_set_param_command(
            object_id,
            P60DockConfigTable.out_en_3.parameter_address,
            P60DockConfigTable.out_en_3.parameter_size,
            parameter,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=27, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.invalid_table_id_test:
        tc_queue.appendleft(
            (QueueCommands.PRINT, "P60 Dock: Testing invalid table id handling")
        )
        table_id_invalid = 5
        command = pack_get_param_command(
            object_id,
            table_id_invalid,
            P60DockHkTable.temperature1.parameter_address,
            P60DockHkTable.temperature1.parameter_size,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=28, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.invalid_address_test:
        tc_queue.appendleft(
            (
                QueueCommands.PRINT,
                "P60 Dock: Testing invalid address handling in get param command",
            )
        )
        invalid_address = bytearray([0x01, 0xF4])
        command = pack_get_param_command(
            object_id,
            TableIds.hk,
            invalid_address,
            P60DockHkTable.temperature1.parameter_size,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=29, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
        tc_queue.appendleft(
            (
                QueueCommands.PRINT,
                "P60 Dock: Testing invalid address handling in set param command",
            )
        )
        invalid_address = bytearray([0x01, 0xF4])
        parameter_size = 2
        parameter = 1
        command = pack_set_param_command(
            object_id, invalid_address, parameter_size, parameter
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=30, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if P60DockTestProcedure.all or P60DockTestProcedure.invalid_parameter_size_test:
        tc_queue.appendleft(
            (
                QueueCommands.PRINT,
                "P60 Dock: Testing handling of invalid parameter sizes in get-param command",
            )
        )
        invalid_size = 5
        command = pack_get_param_command(
            object_id,
            TableIds.hk,
            P60DockHkTable.temperature1.parameter_address,
            invalid_size,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=31, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
        tc_queue.appendleft(
            (
                QueueCommands.PRINT,
                "P60 Dock: Testing handling of invalid parameter size in set-param command",
            )
        )
        parameter = 1
        command = pack_set_param_command(
            object_id,
            P60DockConfigTable.out_en_3.parameter_address,
            invalid_size,
            parameter,
        )
        # command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())

    return tc_queue