Merge branch 'develop' of https://egit.irs.uni-stuttgart.de/eive/eive-tmtc into meier/ploc

2022-05-13 18:39:59 +02:00
parent 50a20cfdc2 b81f756e4b
commit 2c5bf6b378
39 changed files with 1146 additions and 671 deletions
@@ -12,7 +12,18 @@ list yields a list of all related PRs for each release.

 # [v1.11.0]

+- Added more RW HK handling and RW Assembly commands
+- Pack additional parameter which identifiers whether heater is commanded externally or internally
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/67
+
+## Added
+
+- Helper printout for heater commands
+
 # [v1.10.0 and before]

+- Add additional heater commands to command health states
+- Extended heater commands for more informative output which component is heated
+
 See [milestones](https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/milestones)
 and [releases](https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/releases)
@@ -27,10 +27,11 @@ class CustomServiceList(enum.Enum):
    PCDU = "pcdu"
    PL_PCDU = "plpcdu"
    SA_DEPLYOMENT = "sa_depl"
-    REACTION_WHEEL_1 = "reaction_wheel_1"
-    REACTION_WHEEL_2 = "reaction_wheel_2"
-    REACTION_WHEEL_3 = "reaction_wheel_3"
-    REACTION_WHEEL_4 = "reaction_wheel_4"
+    REACTION_WHEEL_1 = "rw-1"
+    REACTION_WHEEL_2 = "rw-2"
+    REACTION_WHEEL_3 = "rw-3"
+    REACTION_WHEEL_4 = "rw-4"
+    RW_ASSEMBLY = "rw-ass"
    RAD_SENSOR = "rad_sensor"
    PLOC_UPDATER = "ploc_updater"
    GPS_0 = "gps0"
@@ -78,14 +78,17 @@
 9700;0x25e4;TEST;INFO;;fsfw/src/fsfw/pus/Service17Test.h
 10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw/hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
 11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
-11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
+11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
 11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
 11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
 11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;;mission/devices/HeaterHandler.h
 11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;;mission/devices/HeaterHandler.h
-11402;0x2c8a;SWITCH_ALREADY_ON;LOW;;mission/devices/HeaterHandler.h
-11403;0x2c8b;SWITCH_ALREADY_OFF;LOW;;mission/devices/HeaterHandler.h
-11404;0x2c8c;MAIN_SWITCH_TIMEOUT;LOW;;mission/devices/HeaterHandler.h
+11402;0x2c8a;HEATER_WENT_ON;INFO;;mission/devices/HeaterHandler.h
+11403;0x2c8b;HEATER_WENT_OFF;INFO;;mission/devices/HeaterHandler.h
+11404;0x2c8c;SWITCH_ALREADY_ON;LOW;;mission/devices/HeaterHandler.h
+11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;;mission/devices/HeaterHandler.h
+11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;;mission/devices/HeaterHandler.h
+11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;;mission/devices/HeaterHandler.h
 11500;0x2cec;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
 11501;0x2ced;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
 11502;0x2cee;DEPLOYMENT_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
@@ -95,7 +98,7 @@
 11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
 11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
 11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
-11605;0x2d55;MPSOC_HANDLER_SEQ_CNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
+11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
 11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/devices/ploc/PlocMPSoCHandler.h
 11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
 11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
@@ -105,21 +108,17 @@
 11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
 11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
 11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/IMTQHandler.h
-11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/RwHandler.h
+11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/devicedefinitions/RwDefinitions.h
+11802;0x2e1a;RESET_OCCURED;LOW;;mission/devices/devicedefinitions/RwDefinitions.h
 11901;0x2e7d;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
 11902;0x2e7e;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
 12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
 12002;0x2ee2;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report;linux/devices/ploc/PlocSupervisorHandler.h
+12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/devices/ploc/PlocSupervisorHandler.h
 12004;0x2ee4;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
+12005;0x2ee5;SUPV_MPSOC_SHUWDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/devices/ploc/PlocSupervisorHandler.h
 12100;0x2f44;SANITIZATION_FAILED;LOW;;bsp_q7s/memory/SdCardManager.h
 12101;0x2f45;MOUNTED_SD_CARD;INFO;;bsp_q7s/memory/SdCardManager.h
-12200;0x2fa8;UPDATE_FILE_NOT_EXISTS;LOW;;linux/devices/ploc/PlocUpdater.h
-12201;0x2fa9;ACTION_COMMANDING_FAILED;LOW;Failed to send command to supervisor handler P1: Return value of CommandActionHelper::commandAction P2: Action ID of command to send;linux/devices/ploc/PlocUpdater.h
-12202;0x2faa;UPDATE_AVAILABLE_FAILED;LOW;Supervisor handler replied action message indicating a command execution failure of the update available command;linux/devices/ploc/PlocUpdater.h
-12203;0x2fab;UPDATE_TRANSFER_FAILED;LOW;Supervisor handler failed to transfer an update space packet. P1: Parameter holds the number of update packets already sent (inclusive the failed packet);linux/devices/ploc/PlocUpdater.h
-12204;0x2fac;UPDATE_VERIFY_FAILED;LOW;Supervisor failed to execute the update verify command.;linux/devices/ploc/PlocUpdater.h
-12205;0x2fad;UPDATE_FINISHED;INFO;MPSoC update successful completed;linux/devices/ploc/PlocUpdater.h
 12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
 12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
 12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
@@ -146,15 +145,15 @@
 12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux/devices/startracker/StrHelper.h
 12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
 12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
-12602;0x313a;SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocMPSoCHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocMPSoCHelper.h
 12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
 12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12605;0x313d;MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12606;0x313e;MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12607;0x313f;ACK_FAILURE_REPORT;LOW;Received acknowledgement failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12608;0x3140;EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12609;0x3141;ACK_INVALID_APID;LOW;Expected acknowledgement report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12610;0x3142;EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
 12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
 12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
 12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
@@ -181,7 +180,24 @@
 13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/devices/P60DockHandler.h
 13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/devices/P60DockHandler.h
 13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/devices/P60DockHandler.h
-13600;0x3520;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
-13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
-13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
-13603;0x3523;REBOOT_HW;MEDIUM;;bsp_q7s/core/CoreController.h
+13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/devices/ploc/PlocSupvHelper.h
+13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/devices/ploc/PlocSupvHelper.h
+13602;0x3522;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/devices/ploc/PlocSupvHelper.h
+13603;0x3523;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/devices/ploc/PlocSupvHelper.h
+13604;0x3524;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/devices/ploc/PlocSupvHelper.h
+13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/devices/ploc/PlocSupvHelper.h
+13606;0x3526;SUPV_SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocSupvHelper.h
+13607;0x3527;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
+13608;0x3528;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
+13609;0x3529;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocSupvHelper.h
+13610;0x352a;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
+13611;0x352b;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
+13612;0x352c;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/devices/ploc/PlocSupvHelper.h
+13613;0x352d;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
+13614;0x352e;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
+13615;0x352f;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/devices/ploc/PlocSupvHelper.h
+13616;0x3530;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/devices/ploc/PlocSupvHelper.h
+13700;0x3584;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
+13701;0x3585;REBOOT_SW;MEDIUM; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
+13702;0x3586;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
+13703;0x3587;REBOOT_HW;MEDIUM;;bsp_q7s/core/CoreController.h
@@ -5,14 +5,13 @@ from tmtccmd.config.definitions import (
 )
 from tmtccmd.tc.definitions import TcQueueT
 from tmtccmd.utility.retval import RetvalDictT
-from tmtccmd.pus.obj_id import ObjectIdDictT
+from tmtccmd.utility.obj_id import ObjectIdDictT
 from tmtccmd.com_if.com_interface_base import CommunicationInterface
 from tmtccmd.core.backend import TmTcHandler
 from tmtccmd.config.hook import TmTcHookBase
-from tmtccmd.config.globals import OpCodeDictKeys

-from config.definitions import CustomServiceList
 from config.retvals import get_retval_dict
+from pus_tc.cmd_definitions import get_eive_service_op_code_dict


 class EiveHookObject(TmTcHookBase):
@@ -56,292 +55,3 @@ class EiveHookObject(TmTcHookBase):

    def get_retval_dict(self) -> RetvalDictT:
        return get_retval_dict()
-
-
-def get_eive_service_op_code_dict(service_op_code_dict: ServiceOpCodeDictT):
-    from pus_tc.cmd_definitions import (
-        add_bpx_cmd_definitions,
-        add_core_controller_definitions,
-        add_pcdu_cmds,
-        add_pl_pcdu_cmds,
-        add_imtq_cmds,
-        add_rw_cmds,
-        add_rad_sens_cmds,
-        add_ploc_mpsoc_cmds,
-        add_ploc_supv_cmds,
-        add_system_cmds,
-        add_time_cmds,
-    )
-    from pus_tc.devs.gps import GpsOpCodes
-
-    add_bpx_cmd_definitions(cmd_dict=service_op_code_dict)
-    add_core_controller_definitions(cmd_dict=service_op_code_dict)
-    add_pl_pcdu_cmds(cmd_dict=service_op_code_dict)
-    add_pcdu_cmds(cmd_dict=service_op_code_dict)
-    add_imtq_cmds(cmd_dict=service_op_code_dict)
-    add_rad_sens_cmds(cmd_dict=service_op_code_dict)
-    add_rw_cmds(cmd_dict=service_op_code_dict)
-    add_ploc_mpsoc_cmds(cmd_dict=service_op_code_dict)
-    add_ploc_supv_cmds(cmd_dict=service_op_code_dict)
-    add_system_cmds(cmd_dict=service_op_code_dict)
-    add_time_cmds(cmd_dict=service_op_code_dict)
-
-    op_code_dict = {
-        GpsOpCodes.RESET_GNSS.value: ("Reset GPS", {OpCodeDictKeys.TIMEOUT: 2.0})
-    }
-    service_tuple = ("GPS 0", op_code_dict)
-    service_op_code_dict[CustomServiceList.GPS_0.value] = service_tuple
-    service_op_code_dict[CustomServiceList.GPS_1.value] = service_tuple
-
-    op_code_dict = {
-        "0": ("ACU: Tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "51": ("ACU: Print channel statistics", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_tuple = ("ACU Devices", op_code_dict)
-    service_op_code_dict[CustomServiceList.ACU.value] = service_tuple
-
-    op_code_dict = {
-        "0": ("TMP1075 Tests", {OpCodeDictKeys.TIMEOUT: 2.2}),
-    }
-    service_tuple = ("TMP1075 1", op_code_dict)
-    service_op_code_dict[CustomServiceList.TMP1075_1.value] = service_tuple
-    service_tuple = ("TMP1075 2", op_code_dict)
-    service_op_code_dict[CustomServiceList.TMP1075_2.value] = service_tuple
-
-    op_code_dict_srv_heater = {
-        "0": ("Heater Tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_heater_tuple = ("Heater Device", op_code_dict_srv_heater)
-
-    op_code_dict_srv_star_tracker = {
-        "0": (
-            "Star Tracker: Mode On, Submode Bootloader",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "1": ("Star Tracker: Mode On, Submode Firmware", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("Star Tracker: Mode Normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("Star Tracker: Mode Off", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("Star Tracker: Mode Raw", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": ("Star Tracker: Ping", {OpCodeDictKeys.TIMEOUT: 5.0}),
-        "6": (
-            "Star Tracker: Switch to bootloader program",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "7": ("Star Tracker: Request temperature", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "8": ("Star Tracker: Request version", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "9": ("Star Tracker: Request interface", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "10": ("Star Tracker: Request power", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "11": (
-            "Star Tracker: Set subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "12": (
-            "Star Tracker: Boot image (requires bootloader mode)",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "13": ("Star Tracker: Request time", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "14": ("Star Tracker: Request solution", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "15": ("Star Tracker: Upload image", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "16": ("Star Tracker: Download image", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "17": ("Star Tracker: Set limit parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "18": ("Star Tracker: Set tracking parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "19": ("Star Tracker: Set mounting parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "20": ("Star Tracker: Set camera parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "22": (
-            "Star Tracker: Set centroiding parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "23": ("Star Tracker: Set LISA parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "24": ("Star Tracker: Set matching parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "25": (
-            "Star Tracker: Set validation parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "26": ("Star Tracker: Set algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "27": ("Star Tracker: Take image", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "28": ("Star Tracker: Stop str helper", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "30": (
-            "Star Tracker: Set name of download image",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "31": ("Star Tracker: Request histogram", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "32": ("Star Tracker: Request contrast", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "33": ("Star Tracker: Set json filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "35": ("Star Tracker: Flash read", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "36": ("Star Tracker: Set flash read filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "37": ("Star Tracker: Get checksum", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "49": ("Star Tracker: Request camera parameter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "50": ("Star Tracker: Request limits", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "51": (
-            "Star Tracker: Set image processor parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "52": (
-            "Star Tracker: (EGSE only) Load camera ground config ",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "53": (
-            "Star Tracker: (EGSE only) Load camera flight config",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "54": (
-            "Star Tracker: Request log level parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "55": (
-            "Star Tracker: Request mounting parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "56": (
-            "Star Tracker: Request image processor parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "57": (
-            "Star Tracker: Request centroiding parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "58": ("Star Tracker: Request lisa parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "59": (
-            "Star Tracker: Request matching parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "60": (
-            "Star Tracker: Request tracking parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "61": (
-            "Star Tracker: Request validation parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "62": ("Star Tracker: Request algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "63": (
-            "Star Tracker: Request subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "64": (
-            "Star Tracker: Request log subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "65": (
-            "Star Tracker: Request debug camera parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "66": ("Star Tracker: Set log level parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "67": (
-            "Star Tracker: Set log subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "68": (
-            "Star Tracker: Set debug camera parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "69": ("Star Tracker: Firmware update", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "70": (
-            "Star Tracker: Disable timestamp generation",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "71": (
-            "Star Tracker: Enable timestamp generation",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
-    service_star_tracker_tuple = ("Star tracker", op_code_dict_srv_star_tracker)
-
-    op_code_dict_srv_ccsds_handler = {
-        "0": ("CCSDS Handler: Set low rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("CCSDS Handler: Set high rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("CCSDS Handler: Enable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("CCSDS Handler: Disable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("CCSDS Handler: Set arbitrary bitrate", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": (
-            "CCSDS Handler: Enable tx clock manipulator",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "6": (
-            "CCSDS Handler: Disable tx clock manipulator",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "7": (
-            "CCSDS Handler: Update tx data on rising edge",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "8": (
-            "CCSDS Handler: Update tx data on falling edge",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
-    service_ccsds_handler_tuple = ("CCSDS Handler", op_code_dict_srv_ccsds_handler)
-
-    op_code_dict_srv_pdec_handler = {
-        "0": ("PDEC Handler: Print CLCW", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("PDEC Handler: Print PDEC monitor", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_pdec_handler_tuple = ("PDEC Handler", op_code_dict_srv_pdec_handler)
-
-    op_code_dict_srv_syrlinks_handler = {
-        "0": ("Syrlinks Handler: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("Syrlinks Handler: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("Syrlinks Handler: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("Syrlinks Handler: Set TX standby", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("Syrlinks Handler: Set TX modulation", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": ("Syrlinks Handler: Set TX carrier wave", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "6": ("Syrlinks Handler: Read TX status", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "7": ("Syrlinks Handler: Read TX waveform", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "8": (
-            "Syrlinks Handler: Read TX AGC value high byte ",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "9": (
-            "Syrlinks Handler: Read TX AGC value low byte ",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "12": (
-            "Syrlinks Handler: Write LCL config",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "13": (
-            "Syrlinks Handler: Read RX status registers",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "14": (
-            "Syrlinks Handler: Read LCL config register",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "15": (
-            "Syrlinks Handler: Set waveform OQPSK",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "16": (
-            "Syrlinks Handler: Set waveform BPSK",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "17": (
-            "Syrlinks Handler: Set second config",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "18": (
-            "Syrlinks Handler: Enable debug output",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "19": (
-            "Syrlinks Handler: Disable debug output",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
-    service_syrlinks_handler_tuple = (
-        "Syrlinks Handler",
-        op_code_dict_srv_syrlinks_handler,
-    )
-    service_op_code_dict[CustomServiceList.HEATER.value] = service_heater_tuple
-    service_op_code_dict[
-        CustomServiceList.STAR_TRACKER.value
-    ] = service_star_tracker_tuple
-    service_op_code_dict[
-        CustomServiceList.CCSDS_HANDLER.value
-    ] = service_ccsds_handler_tuple
-    service_op_code_dict[
-        CustomServiceList.PDEC_HANDLER.value
-    ] = service_pdec_handler_tuple
-    service_op_code_dict[
-        CustomServiceList.SYRLINKS.value
-    ] = service_syrlinks_handler_tuple
@@ -4,7 +4,7 @@
            it to your needs.
 """
 import os.path
-from tmtccmd.pus.obj_id import ObjectIdDictT
+from tmtccmd.utility.obj_id import ObjectIdDictT
 from tmtccmd.fsfw import parse_fsfw_objects_csv
 from tmtccmd.logging import get_console_logger

@@ -67,10 +67,21 @@ STR_IMG_HELPER_ID = bytes([0x44, 0x33, 0x00, 0x02])
 PLOC_MPSOC_ID = bytes([0x44, 0x33, 0x00, 0x15])
 PL_PCDU_ID = bytes([0x44, 0x30, 0x00, 0x00])

+# Other
+HEATER_0_OBC_BRD = bytes([0x60, 0x00, 0x00, 0x00])
+HEATER_1_PLOC_PROC_BRD = bytes([0x60, 0x00, 0x00, 0x01])
+HEATER_2_ACS_BRD = bytes([0x60, 0x00, 0x00, 0x02])
+HEATER_3_PCDU_BRD = bytes([0x60, 0x00, 0x00, 0x03])
+HEATER_4_CAMERA = bytes([0x60, 0x00, 0x00, 0x04])
+HEATER_5_STR = bytes([0x60, 0x00, 0x00, 0x05])
+HEATER_6_DRO = bytes([0x60, 0x00, 0x00, 0x06])
+HEATER_7_HPA = bytes([0x60, 0x00, 0x00, 0x07])
+
 # System and Assembly Objects
 ACS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x01])
 SUS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x02])
 TCS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x03])
+RW_ASSEMBLY = bytes([0x73, 0x00, 0x00, 0x04])


 def get_object_ids() -> ObjectIdDictT:
@@ -4,18 +4,18 @@
 0x43400001;THERMAL_CONTROLLER
 0x44120006;MGM_0_LIS3_HANDLER
 0x44120010;GYRO_0_ADIS_HANDLER
-0x44120032;SUS_0
-0x44120033;SUS_1
-0x44120034;SUS_2
-0x44120035;SUS_3
-0x44120036;SUS_4
-0x44120037;SUS_5
-0x44120038;SUS_6
-0x44120039;SUS_7
-0x44120040;SUS_8
-0x44120041;SUS_9
-0x44120042;SUS_10
-0x44120043;SUS_11
+0x44120032;SUS_0_N_LOC_XFYFZM_PT_XF
+0x44120033;SUS_1_N_LOC_XBYFZM_PT_XB
+0x44120034;SUS_2_N_LOC_XFYBZB_PT_YB
+0x44120035;SUS_3_N_LOC_XFYBZF_PT_YF
+0x44120036;SUS_4_N_LOC_XMYFZF_PT_ZF
+0x44120037;SUS_5_N_LOC_XFYMZB_PT_ZB
+0x44120038;SUS_6_R_LOC_XFYBZM_PT_XF
+0x44120039;SUS_7_R_LOC_XBYBZM_PT_XB
+0x44120040;SUS_8_R_LOC_XBYBZB_PT_YB
+0x44120041;SUS_9_R_LOC_XBYBZB_PT_YF
+0x44120042;SUS_10_N_LOC_XMYBZF_PT_ZF
+0x44120043;SUS_11_R_LOC_XBYMZB_PT_ZB
 0x44120047;RW1
 0x44120107;MGM_1_RM3100_HANDLER
 0x44120111;GYRO_1_L3G_HANDLER
@@ -41,6 +41,8 @@
 0x44330001;PLOC_MEMORY_DUMPER
 0x44330002;STR_HELPER
 0x44330003;PLOC_MPSOC_HELPER
+0x44330004;AXI_PTME_CONFIG
+0x44330005;PTME_CONFIG
 0x44330015;PLOC_MPSOC_HANDLER
 0x44330016;PLOC_SUPERVISOR_HANDLER
 0x44330017;PLOC_SUPERVISOR_HELPER
@@ -48,26 +50,27 @@
 0x444100A4;HEATER_HANDLER
 0x44420004;TMP1075_HANDLER_1
 0x44420005;TMP1075_HANDLER_2
-0x44420016;RTD_IC_3
-0x44420017;RTD_IC_4
-0x44420018;RTD_IC_5
-0x44420019;RTD_IC_6
-0x44420020;RTD_IC_7
-0x44420021;RTD_IC_8
-0x44420022;RTD_IC_9
-0x44420023;RTD_IC_10
-0x44420024;RTD_IC_11
-0x44420025;RTD_IC_12
-0x44420026;RTD_IC_13
-0x44420027;RTD_IC_14
-0x44420028;RTD_IC_15
-0x44420029;RTD_IC_16
-0x44420030;RTD_IC_17
-0x44420031;RTD_IC_18
+0x44420016;RTD_0_IC3_PLOC_HEATSPREADER
+0x44420017;RTD_1_IC4_PLOC_MISSIONBOARD
+0x44420018;RTD_2_IC5_4K_CAMERA
+0x44420019;RTD_3_IC6_DAC_HEATSPREADER
+0x44420020;RTD_4_IC7_STARTRACKER
+0x44420021;RTD_5_IC8_RW1_MX_MY
+0x44420022;RTD_6_IC9_DRO
+0x44420023;RTD_7_IC10_SCEX
+0x44420024;RTD_8_IC11_X8
+0x44420025;RTD_9_IC12_HPA
+0x44420026;RTD_10_IC13_PL_TX
+0x44420027;RTD_11_IC14_MPA
+0x44420028;RTD_12_IC15_ACU
+0x44420029;RTD_13_IC16_PLPCDU_HEATSPREADER
+0x44420030;RTD_14_IC17_TCS_BOARD
+0x44420031;RTD_15_IC18_IMTQ
 0x445300A3;SYRLINKS_HK_HANDLER
 0x49000000;ARDUINO_COM_IF
 0x49010005;GPIO_IF
-0x49020004;SPI_COM_IF
+0x49020004;SPI_MAIN_COM_IF
+0x49020005;SPI_RW_COM_IF
 0x49030003;UART_COM_IF
 0x49040002;I2C_COM_IF
 0x49050001;CSP_COM_IF
@@ -109,9 +112,18 @@
 0x5400CAFE;DUMMY_INTERFACE
 0x54123456;LIBGPIOD_TEST
 0x54694269;TEST_TASK
+0x60000000;HEATER_0_PLOC_PROC_BRD
+0x60000001;HEATER_1_PCDU_BRD
+0x60000002;HEATER_2_ACS_BRD
+0x60000003;HEATER_3_OBC_BRD
+0x60000004;HEATER_4_CAMERA
+0x60000005;HEATER_5_STR
+0x60000006;HEATER_6_DRO
+0x60000007;HEATER_7_HPA
 0x73000001;ACS_BOARD_ASS
 0x73000002;SUS_BOARD_ASS
 0x73000003;TCS_BOARD_ASS
+0x73000004;RW_ASS
 0x73000100;TM_FUNNEL
 0x73500000;CCSDS_IP_CORE_BRIDGE
 0xFFFFFFFF;NO_OBJECT
@@ -1,13 +1,13 @@
 0x0;OK;System-wide code for ok.;RETURN_OK;HasReturnvaluesIF.h;HasReturnvaluesIF
 0x1;Failed;Unspecified system-wide code for failed.;RETURN_FAILED;HasReturnvaluesIF.h;HasReturnvaluesIF
-0x65a0;NVMB_KeyNotExists;Specified key does not exist in json file;0xA0;mission/memory/NVMParameterBase.h;NVM_PARAM_BASE
-0x5aa0;SUSS_ErrorUnlockMutex;;0xA0;mission/devices/SusHandler.h;SUS_HANDLER
-0x5aa1;SUSS_ErrorLockMutex;;0xA1;mission/devices/SusHandler.h;SUS_HANDLER
-0x68a0;SADPL_CommandNotSupported;;0xA0;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
-0x68a1;SADPL_DeploymentAlreadyExecuting;;0xA1;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
-0x68a2;SADPL_MainSwitchTimeoutFailure;;0xA2;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
-0x68a3;SADPL_SwitchingDeplSa1Failed;;0xA3;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
-0x68a4;SADPL_SwitchingDeplSa2Failed;;0xA4;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
+0x66a0;NVMB_KeyNotExists;Specified key does not exist in json file;0xA0;mission/memory/NVMParameterBase.h;NVM_PARAM_BASE
+0x5ba0;SUSS_ErrorUnlockMutex;;0xA0;mission/devices/SusHandler.h;SUS_HANDLER
+0x5ba1;SUSS_ErrorLockMutex;;0xA1;mission/devices/SusHandler.h;SUS_HANDLER
+0x69a0;SADPL_CommandNotSupported;;0xA0;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
+0x69a1;SADPL_DeploymentAlreadyExecuting;;0xA1;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
+0x69a2;SADPL_MainSwitchTimeoutFailure;;0xA2;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
+0x69a3;SADPL_SwitchingDeplSa1Failed;;0xA3;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
+0x69a4;SADPL_SwitchingDeplSa2Failed;;0xA4;mission/devices/SolarArrayDeploymentHandler.h;SA_DEPL_HANDLER
 0x55b0;RWHA_SpiWriteFailure;;0xB0;mission/devices/RwHandler.h;RW_HANDLER
 0x55b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;0xB1;mission/devices/RwHandler.h;RW_HANDLER
 0x55b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;0xB2;mission/devices/RwHandler.h;RW_HANDLER
@@ -20,12 +20,12 @@
 0x55a2;RWHA_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;0xA2;mission/devices/RwHandler.h;RW_HANDLER
 0x55a3;RWHA_ExecutionFailed;Command execution failed;0xA3;mission/devices/RwHandler.h;RW_HANDLER
 0x55a4;RWHA_CrcError;Reaction wheel reply has invalid crc;0xA4;mission/devices/RwHandler.h;RW_HANDLER
-0x5f00;GOMS_PacketTooLong;;0;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
-0x5f01;GOMS_InvalidTableId;;1;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
-0x5f02;GOMS_InvalidAddress;;2;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
-0x5f03;GOMS_InvalidParamSize;;3;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
-0x5f04;GOMS_InvalidPayloadSize;;4;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
-0x5f05;GOMS_UnknownReplyId;;5;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
+0x6000;GOMS_PacketTooLong;;0;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
+0x6001;GOMS_InvalidTableId;;1;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
+0x6002;GOMS_InvalidAddress;;2;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
+0x6003;GOMS_InvalidParamSize;;3;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
+0x6004;GOMS_InvalidPayloadSize;;4;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
+0x6005;GOMS_UnknownReplyId;;5;mission/devices/GomspaceDeviceHandler.h;GOM_SPACE_HANDLER
 0x54a0;IMTQ_InvalidCommandCode;;0xA0;mission/devices/IMTQHandler.h;IMTQ_HANDLER
 0x54a1;IMTQ_ParameterMissing;;0xA1;mission/devices/IMTQHandler.h;IMTQ_HANDLER
 0x54a2;IMTQ_ParameterInvalid;;0xA2;mission/devices/IMTQHandler.h;IMTQ_HANDLER
@@ -48,7 +48,7 @@
 0x52a3;HEATER_InvalidSwitchNr;;0xA3;mission/devices/HeaterHandler.h;HEATER_HANDLER
 0x52a4;HEATER_MainSwitchSetTimeout;;0xA4;mission/devices/HeaterHandler.h;HEATER_HANDLER
 0x52a5;HEATER_CommandAlreadyWaiting;;0xA5;mission/devices/HeaterHandler.h;HEATER_HANDLER
-0x62a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;0xA0;mission/tmtc/CCSDSHandler.h;CCSDS_HANDLER
+0x63a0;CCSDS_CommandNotImplemented;Received action message with unknown action id;0xA0;mission/tmtc/CCSDSHandler.h;CCSDS_HANDLER
 0x2701; SM_DataTooLarge;;1;fsfw/src/fsfw/storagemanager/StorageManagerIF.h;STORAGE_MANAGER_IF
 0x2702; SM_DataStorageFull;;2;fsfw/src/fsfw/storagemanager/StorageManagerIF.h;STORAGE_MANAGER_IF
 0x2703; SM_IllegalStorageId;;3;fsfw/src/fsfw/storagemanager/StorageManagerIF.h;STORAGE_MANAGER_IF
@@ -389,6 +389,7 @@
 0x2e03; ASC_BufferTooSmall;;0x3;fsfw/src/fsfw/globalfunctions/AsciiConverter.h;ASCII_CONVERTER
 0x1701; HHI_ObjectNotHealthy;;1;fsfw/src/fsfw/health/HasHealthIF.h;HAS_HEALTH_IF
 0x1702; HHI_InvalidHealthState;;2;fsfw/src/fsfw/health/HasHealthIF.h;HAS_HEALTH_IF
+0x1703; HHI_IsExternallyControlled;;3;fsfw/src/fsfw/health/HasHealthIF.h;HAS_HEALTH_IF
 0x3101; CF_ObjectHasNoFunctions;;1;fsfw/src/fsfw/action/CommandsActionsIF.h;COMMANDS_ACTIONS_IF
 0x3102; CF_AlreadyCommanding;;2;fsfw/src/fsfw/action/CommandsActionsIF.h;COMMANDS_ACTIONS_IF
 0x3201; HF_IsBusy;;1;fsfw/src/fsfw/action/HasActionsIF.h;HAS_ACTIONS_IF
@@ -446,68 +447,73 @@
 0x4203; UXOS_CommandError;Command execution failed;3;fsfw/hal/src/fsfw_hal/linux/CommandExecutor.h;LINUX_OSAL
 0x4204; UXOS_NoCommandLoadedOrPending;;4;fsfw/hal/src/fsfw_hal/linux/CommandExecutor.h;LINUX_OSAL
 0x4206; UXOS_PcloseCallError;;6;fsfw/hal/src/fsfw_hal/linux/CommandExecutor.h;LINUX_OSAL
-0x7100; SCBU_KeyNotFound;;0;bsp_q7s/memory/scratchApi.h;SCRATCH_BUFFER
-0x66a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;0xA0;bsp_q7s/memory/FilesystemHelper.h;FILE_SYSTEM_HELPER
-0x66a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;0xA1;bsp_q7s/memory/FilesystemHelper.h;FILE_SYSTEM_HELPER
-0x7000; SDMA_OpOngoing;;0;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x7001; SDMA_AlreadyOn;;1;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x7002; SDMA_AlreadyMounted;;2;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x7003; SDMA_AlreadyOff;;3;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x700a; SDMA_StatusFileNexists;;10;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x700b; SDMA_StatusFileFormatInvalid;;11;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x700c; SDMA_MountError;;12;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x700d; SDMA_UnmountError;;13;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x700e; SDMA_SystemCallError;;14;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x700f; SDMA_PopenCallError;;15;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
-0x67a0; PLMPHLP_FileClosedAccidentally;File accidentally close;0xA0;linux/devices/ploc/PlocMPSoCHelper.h;PLOC_MPSOC_HELPER
-0x59a0;PLSV_CrcFailure;Space Packet received from PLOC supervisor has invalid CRC;0xA0;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a1;PLSV_ReceivedAckFailure;Received ACK failure reply from PLOC supervisor;0xA1;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a2;PLSV_ReceivedExeFailure;Received execution failure reply from PLOC supervisor;0xA2;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a3;PLSV_InvalidApid;Received space packet with invalid APID from PLOC supervisor;0xA3;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a4;PLSV_GetTimeFailure;Failed to read current system time;0xA4;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a5;PLSV_InvalidWatchdog;Received command with invalid watchdog parameter. Valid watchdogs are 0 for PS, 1 for PL and 2 for INT;0xA5;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a6;PLSV_InvalidWatchdogTimeout;Received watchdog timeout config command with invalid timeout. Valid timeouts must be in the range between 1000 and 360000 ms.;0xA6;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a7;PLSV_InvalidLatchupId;Received latchup config command with invalid latchup ID;0xA7;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a8;PLSV_SweepPeriodTooSmall;Received set adc sweep period command with invalid sweep period. Must be larger than 21.;0xA8;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59a9;PLSV_InvalidTestParam;Receive auto EM test command with invalid test param. Valid params are 1 and 2.;0xA9;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59aa;PLSV_MramPacketParsingFailure;Returned when scanning for MRAM dump packets failed.;0xAA;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59ab;PLSV_InvalidMramAddresses;Returned when the start and stop addresses of the MRAM dump or MRAM  wipe commands are invalid (e.g. start address bigger than stop address);0xAB;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59ac;PLSV_NoMramPacket;Expect reception of an MRAM dump packet but received space packet with other apid.;0xAC;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59ad;PLSV_PathDoesNotExist;Path to PLOC directory on SD card does not exist;0xAD;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x59ae;PLSV_MramFileNotExists;MRAM dump file does not exists. The file should actually already have been created with the reception of the first dump packet.;0xAE;linux/devices/ploc/PlocSupervisorHandler.h;PLOC_SUPERVISOR_HANDLER
-0x5da0;PLUD_UpdaterBusy;Updater is already performing an update;0xA0;linux/devices/ploc/PlocUpdater.h;PLOC_UPDATER
-0x5da1;PLUD_NameTooLong;Received update command with invalid path string (too long).;0xA1;linux/devices/ploc/PlocUpdater.h;PLOC_UPDATER
-0x5da2;PLUD_SdNotMounted;Received command to initiate update but SD card with update image not mounted.;0xA2;linux/devices/ploc/PlocUpdater.h;PLOC_UPDATER
-0x5da3;PLUD_FileNotExists;Update file received with update command does not exist.;0xA3;linux/devices/ploc/PlocUpdater.h;PLOC_UPDATER
-0x60a0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;0xA0;linux/devices/ploc/PlocMemoryDumper.h;PLOC_MEMORY_DUMPER
-0x60a1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;0xA1;linux/devices/ploc/PlocMemoryDumper.h;PLOC_MEMORY_DUMPER
-0x69a0;MPSOCRTVIF_CrcFailure;Space Packet received from PLOC has invalid CRC;0xA0;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a1;MPSOCRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC;0xA1;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a2;MPSOCRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC;0xA2;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a3;MPSOCRTVIF_InvalidApid;Received space packet with invalid APID from PLOC;0xA3;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a4;MPSOCRTVIF_InvalidLength;Received command with invalid length;0xA4;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a5;MPSOCRTVIF_FilenameTooLong;Filename of file in OBC filesystem is too long;0xA5;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a6;MPSOCRTVIF_MpsocHelperExecuting;MPSoC helper is currently executing a command;0xA6;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a7;MPSOCRTVIF_MpsocFilenameTooLong;Filename of MPSoC file is to long (max. 256 bytes);0xA7;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a8;MPSOCRTVIF_InvalidParameter;Command has invalid parameter;0xA8;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
-0x69a9;MPSOCRTVIF_NameTooLong;Received command has file string with invalid length;0xA9;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x7300; SCBU_KeyNotFound;;0;bsp_q7s/memory/scratchApi.h;SCRATCH_BUFFER
+0x67a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;0xA0;bsp_q7s/memory/FilesystemHelper.h;FILE_SYSTEM_HELPER
+0x67a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;0xA1;bsp_q7s/memory/FilesystemHelper.h;FILE_SYSTEM_HELPER
+0x7200; SDMA_OpOngoing;;0;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x7201; SDMA_AlreadyOn;;1;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x7202; SDMA_AlreadyMounted;;2;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x7203; SDMA_AlreadyOff;;3;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x720a; SDMA_StatusFileNexists;;10;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x720b; SDMA_StatusFileFormatInvalid;;11;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x720c; SDMA_MountError;;12;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x720d; SDMA_UnmountError;;13;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x720e; SDMA_SystemCallError;;14;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x720f; SDMA_PopenCallError;;15;bsp_q7s/memory/SdCardManager.h;SD_CARD_MANAGER
+0x68a0; PLMPHLP_FileClosedAccidentally;File accidentally close;0xA0;linux/devices/ploc/PlocMPSoCHelper.h;PLOC_MPSOC_HELPER
+0x61a0;PLMEMDUMP_MramAddressTooHigh;The capacity of the MRAM amounts to 512 kB. Thus the maximum address must not be higher than 0x7d000.;0xA0;linux/devices/ploc/PlocMemoryDumper.h;PLOC_MEMORY_DUMPER
+0x61a1;PLMEMDUMP_MramInvalidAddressCombination;The specified end address is lower than the start address;0xA1;linux/devices/ploc/PlocMemoryDumper.h;PLOC_MEMORY_DUMPER
+0x5aa0;PLSPVhLP_FileClosedAccidentally;File accidentally close;0xA0;linux/devices/ploc/PlocSupvHelper.h;PLOC_SUPV_HELPER
+0x5aa1;PLSPVhLP_ProcessTerminated;Process has been terminated by command;0xA1;linux/devices/ploc/PlocSupvHelper.h;PLOC_SUPV_HELPER
+0x5aa2;PLSPVhLP_PathNotExists;Received command with invalid pathname;0xA2;linux/devices/ploc/PlocSupvHelper.h;PLOC_SUPV_HELPER
+0x5aa3;PLSPVhLP_EventBufferReplyInvalidApid;Expected event buffer TM but received space packet with other APID;0xA3;linux/devices/ploc/PlocSupvHelper.h;PLOC_SUPV_HELPER
+0x6aa0;MPSOCRTVIF_CrcFailure;Space Packet received from PLOC has invalid CRC;0xA0;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa1;MPSOCRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC;0xA1;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa2;MPSOCRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC;0xA2;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa3;MPSOCRTVIF_InvalidApid;Received space packet with invalid APID from PLOC;0xA3;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa4;MPSOCRTVIF_InvalidLength;Received command with invalid length;0xA4;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa5;MPSOCRTVIF_FilenameTooLong;Filename of file in OBC filesystem is too long;0xA5;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa6;MPSOCRTVIF_MpsocHelperExecuting;MPSoC helper is currently executing a command;0xA6;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa7;MPSOCRTVIF_MpsocFilenameTooLong;Filename of MPSoC file is to long (max. 256 bytes);0xA7;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa8;MPSOCRTVIF_InvalidParameter;Command has invalid parameter;0xA8;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6aa9;MPSOCRTVIF_NameTooLong;Received command has file string with invalid length;0xA9;linux/devices/devicedefinitions/MPSoCReturnValuesIF.h;MPSOC_RETURN_VALUES_IF
+0x6ba0;SPVRTVIF_CrcFailure;Space Packet received from PLOC supervisor has invalid CRC;0xA0;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba1;SPVRTVIF_ReceivedAckFailure;Received ACK failure reply from PLOC supervisor;0xA1;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba2;SPVRTVIF_ReceivedExeFailure;Received execution failure reply from PLOC supervisor;0xA2;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba3;SPVRTVIF_InvalidApid;Received space packet with invalid APID from PLOC supervisor;0xA3;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba4;SPVRTVIF_GetTimeFailure;Failed to read current system time;0xA4;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba5;SPVRTVIF_InvalidWatchdog;Received command with invalid watchdog parameter. Valid watchdogs are 0 for PS, 1 for PL and 2 for INT;0xA5;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba6;SPVRTVIF_InvalidWatchdogTimeout;Received watchdog timeout config command with invalid timeout. Valid timeouts must be in the range between 1000 and 360000 ms.;0xA6;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba7;SPVRTVIF_InvalidLatchupId;Received latchup config command with invalid latchup ID;0xA7;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba8;SPVRTVIF_SweepPeriodTooSmall;Received set adc sweep period command with invalid sweep period. Must be larger than 21.;0xA8;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6ba9;SPVRTVIF_InvalidTestParam;Receive auto EM test command with invalid test param. Valid params are 1 and 2.;0xA9;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6baa;SPVRTVIF_MramPacketParsingFailure;Returned when scanning for MRAM dump packets failed.;0xAA;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bab;SPVRTVIF_InvalidMramAddresses;Returned when the start and stop addresses of the MRAM dump or MRAM  wipe commands are invalid (e.g. start address bigger than stop address);0xAB;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bac;SPVRTVIF_NoMramPacket;Expect reception of an MRAM dump packet but received space packet with other apid.;0xAC;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bad;SPVRTVIF_PathDoesNotExist;Path to PLOC directory on SD card does not exist;0xAD;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bae;SPVRTVIF_MramFileNotExists;MRAM dump file does not exists. The file should actually already have been created with the reception of the first dump packet.;0xAE;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6baf;SPVRTVIF_InvalidLength;Received action command has invalid length;0xAF;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bb0;SPVRTVIF_FilenameTooLong;Filename too long;0xB0;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bb1;SPVRTVIF_UpdateStatusReportInvalidLength;Received update status report with invalid packet length field;0xB1;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bb2;SPVRTVIF_UpdateCrcFailure;Update status report does not contain expected CRC. There might be a bit flip in the update memory region.;0xB2;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
+0x6bb3;SPVRTVIF_SupvHelperExecuting;Supervisor helper task ist currently executing a command (wait until helper tas has finished or interrupt by sending the terminate command);0xB3;linux/devices/devicedefinitions/SupvReturnValuesIF.h;SUPV_RETURN_VALUES_IF
 0x57e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);0xE0;linux/devices/devicedefinitions/PlocMPSoCDefinitions.h;DWLPWRON_CMD
 0x57e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);0xE1;linux/devices/devicedefinitions/PlocMPSoCDefinitions.h;DWLPWRON_CMD
-0x6401;JSONBASE_JsonFileNotExists;Specified json file does not exist;1;linux/devices/startracker/ArcsecJsonParamBase.h;ARCSEC_JSON_BASE
-0x6402;JSONBASE_SetNotExists;Requested set does not exist in json file;2;linux/devices/startracker/ArcsecJsonParamBase.h;ARCSEC_JSON_BASE
-0x6403;JSONBASE_ParamNotExists;Requested parameter does not exist in json file;3;linux/devices/startracker/ArcsecJsonParamBase.h;ARCSEC_JSON_BASE
+0x6501;JSONBASE_JsonFileNotExists;Specified json file does not exist;1;linux/devices/startracker/ArcsecJsonParamBase.h;ARCSEC_JSON_BASE
+0x6502;JSONBASE_SetNotExists;Requested set does not exist in json file;2;linux/devices/startracker/ArcsecJsonParamBase.h;ARCSEC_JSON_BASE
+0x6503;JSONBASE_ParamNotExists;Requested parameter does not exist in json file;3;linux/devices/startracker/ArcsecJsonParamBase.h;ARCSEC_JSON_BASE
 0x56a0;STRH_TemperatureReqFailed;Status in temperature reply signals error;0xA0;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
 0x56a1;STRH_PingFailed;Ping command failed;0xA1;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
 0x56a2;STRH_VersionReqFailed;Status in version reply signals error;0xA2;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
-0x5ea0;STRHLP_SdNotMounted;SD card specified in path string not mounted;0xA0;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea1;STRHLP_FileNotExists;Specified file does not exist on filesystem;0xA1;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea2;STRHLP_PathNotExists;Specified path does not exist;0xA2;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea3;STRHLP_FileCreationFailed;Failed to create download image or read flash file;0xA3;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea4;STRHLP_RegionMismatch;Region in flash write/read reply does not match expected region;0xA4;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea5;STRHLP_AddressMismatch;Address in flash write/read reply does not match expected address;0xA5;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea6;STRHLP_LengthMismatch;Length in flash write/read reply does not match expected length;0xA6;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea7;STRHLP_StatusError;Status field in reply signals error;0xA7;linux/devices/startracker/StrHelper.h;STR_HELPER
-0x5ea8;STRHLP_InvalidTypeId;Reply has invalid type ID (should be of action reply type);0xA8;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa0;STRHLP_SdNotMounted;SD card specified in path string not mounted;0xA0;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa1;STRHLP_FileNotExists;Specified file does not exist on filesystem;0xA1;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa2;STRHLP_PathNotExists;Specified path does not exist;0xA2;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa3;STRHLP_FileCreationFailed;Failed to create download image or read flash file;0xA3;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa4;STRHLP_RegionMismatch;Region in flash write/read reply does not match expected region;0xA4;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa5;STRHLP_AddressMismatch;Address in flash write/read reply does not match expected address;0xA5;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa6;STRHLP_LengthMismatch;Length in flash write/read reply does not match expected length;0xA6;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa7;STRHLP_StatusError;Status field in reply signals error;0xA7;linux/devices/startracker/StrHelper.h;STR_HELPER
+0x5fa8;STRHLP_InvalidTypeId;Reply has invalid type ID (should be of action reply type);0xA8;linux/devices/startracker/StrHelper.h;STR_HELPER
 0x56a3;STRH_InterfaceReqFailed;Status in interface reply signals error;0xA3;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
 0x56a4;STRH_PowerReqFailed;Status in power reply signals error;0xA4;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
 0x56a5;STRH_SetParamFailed;Status of reply to parameter set command signals error;0xA5;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
@@ -530,24 +536,24 @@
 0x56b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;0xB6;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
 0x56b7;STRH_StartrackerRunningFirmware;Star tracker is in firmware mode but must be in bootloader mode to execute this command;0xB7;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
 0x56b8;STRH_StartrackerRunningBootloader;Star tracker is in bootloader mode but must be in firmware mode to execute this command;0xB8;linux/devices/startracker/StarTrackerHandler.h;STR_HANDLER
-0x5ca0;PTME_UnknownVcId;;0xA0;linux/obc/Ptme.h;PTME
-0x61a0;PDEC_AbandonedCltu;;0xA0;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a1;PDEC_FrameDirty;;0xA1;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a2;PDEC_FrameIllegalMultipleReasons;;0xA2;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a3;PDEC_AdDiscardedLockout;;0xA3;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a4;PDEC_AdDiscardedWait;;0xA4;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a5;PDEC_AdDiscardedNsVs;;0xA5;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61b0;PDEC_CommandNotImplemented;Received action message with unknown action id;0xB0;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a6;PDEC_NoReport;;0xA6;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a7;PDEC_ErrorVersionNumber;;0xA7;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a8;PDEC_IllegalCombination;;0xA8;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61a9;PDEC_InvalidScId;;0xA9;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61aa;PDEC_InvalidVcIdMsb;;0xAA;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61ab;PDEC_InvalidVcIdLsb;;0xAB;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61ac;PDEC_NsNotZero;;0xAC;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x61ae;PDEC_InvalidBcCc;;0xAE;linux/obc/PdecHandler.h;PDEC_HANDLER
-0x63a0;RS_RateNotSupported;The commanded rate is not supported by the current FPGA design;0xA0;linux/obc/PtmeConfig.h;RATE_SETTER
-0x63a1;RS_BadBitRate;Bad bitrate has been commanded (e.g. 0);0xA1;linux/obc/PtmeConfig.h;RATE_SETTER
-0x63a2;RS_ClkInversionFailed;Failed to invert clock and thus change the time the data is updated with respect to the tx clock;0xA2;linux/obc/PtmeConfig.h;RATE_SETTER
-0x63a3;RS_TxManipulatorConfigFailed;Failed to change configuration bit of tx clock manipulator;0xA3;linux/obc/PtmeConfig.h;RATE_SETTER
-0x5ba0;IPCI_PapbBusy;;0xA0;linux/obc/PapbVcInterface.h;CCSDS_IP_CORE_BRIDGE
+0x5da0;PTME_UnknownVcId;;0xA0;linux/obc/Ptme.h;PTME
+0x62a0;PDEC_AbandonedCltu;;0xA0;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a1;PDEC_FrameDirty;;0xA1;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a2;PDEC_FrameIllegalMultipleReasons;;0xA2;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a3;PDEC_AdDiscardedLockout;;0xA3;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a4;PDEC_AdDiscardedWait;;0xA4;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a5;PDEC_AdDiscardedNsVs;;0xA5;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62b0;PDEC_CommandNotImplemented;Received action message with unknown action id;0xB0;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a6;PDEC_NoReport;;0xA6;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a7;PDEC_ErrorVersionNumber;;0xA7;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a8;PDEC_IllegalCombination;;0xA8;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62a9;PDEC_InvalidScId;;0xA9;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62aa;PDEC_InvalidVcIdMsb;;0xAA;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62ab;PDEC_InvalidVcIdLsb;;0xAB;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62ac;PDEC_NsNotZero;;0xAC;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x62ae;PDEC_InvalidBcCc;;0xAE;linux/obc/PdecHandler.h;PDEC_HANDLER
+0x64a0;RS_RateNotSupported;The commanded rate is not supported by the current FPGA design;0xA0;linux/obc/PtmeConfig.h;RATE_SETTER
+0x64a1;RS_BadBitRate;Bad bitrate has been commanded (e.g. 0);0xA1;linux/obc/PtmeConfig.h;RATE_SETTER
+0x64a2;RS_ClkInversionFailed;Failed to invert clock and thus change the time the data is updated with respect to the tx clock;0xA2;linux/obc/PtmeConfig.h;RATE_SETTER
+0x64a3;RS_TxManipulatorConfigFailed;Failed to change configuration bit of tx clock manipulator;0xA3;linux/obc/PtmeConfig.h;RATE_SETTER
+0x5ca0;IPCI_PapbBusy;;0xA0;linux/obc/PapbVcInterface.h;CCSDS_IP_CORE_BRIDGE
@@ -8,7 +8,7 @@
 """
 import enum

-from tmtccmd.tc.service_8_functional_cmd import generate_action_command
+from tmtccmd.tc.pus_8_funccmd import generate_action_command
 from tmtccmd.tc.definitions import PusTelecommand


@@ -1,3 +1,4 @@
+from pus_tc.devs.gps import GpsOpCodes
 from tmtccmd.config import (
    add_op_code_entry,
    add_service_op_code_entry,
@@ -6,9 +7,283 @@ from tmtccmd.config import (
    OpCodeDictKeys,
 )
 from config.definitions import CustomServiceList
+from pus_tc.devs.heater import add_heater_cmds
+from pus_tc.devs.reaction_wheels import add_rw_cmds
 from pus_tc.devs.bpx_batt import BpxOpCodes


+def get_eive_service_op_code_dict(service_op_code_dict: ServiceOpCodeDictT):
+    add_bpx_cmd_definitions(cmd_dict=service_op_code_dict)
+    add_core_controller_definitions(cmd_dict=service_op_code_dict)
+    add_pl_pcdu_cmds(cmd_dict=service_op_code_dict)
+    add_pcdu_cmds(cmd_dict=service_op_code_dict)
+    add_imtq_cmds(cmd_dict=service_op_code_dict)
+    add_rad_sens_cmds(cmd_dict=service_op_code_dict)
+    add_rw_cmds(cmd_dict=service_op_code_dict)
+    add_ploc_mpsoc_cmds(cmd_dict=service_op_code_dict)
+    add_ploc_supv_cmds(cmd_dict=service_op_code_dict)
+    add_system_cmds(cmd_dict=service_op_code_dict)
+    add_time_cmds(cmd_dict=service_op_code_dict)
+    add_syrlinks_cmds(cmd_dict=service_op_code_dict)
+    add_gps_cmds(cmd_dict=service_op_code_dict)
+    add_str_cmds(cmd_dict=service_op_code_dict)
+    add_ccsds_cmds(cmd_dict=service_op_code_dict)
+    add_pdec_cmds(cmd_dict=service_op_code_dict)
+    add_heater_cmds(cmd_dict=service_op_code_dict)
+    add_tmp_sens_cmds(cmd_dict=service_op_code_dict)
+
+
+def add_tmp_sens_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = {
+        "0": ("TMP1075 Tests", {OpCodeDictKeys.TIMEOUT: 2.2}),
+    }
+    service_tuple = ("TMP1075 1", op_code_dict)
+    cmd_dict[CustomServiceList.TMP1075_1.value] = service_tuple
+    service_tuple = ("TMP1075 2", op_code_dict)
+    cmd_dict[CustomServiceList.TMP1075_2.value] = service_tuple
+
+
+def add_pdec_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_pdec_handler = {
+        "0": ("PDEC Handler: Print CLCW", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "1": ("PDEC Handler: Print PDEC monitor", {OpCodeDictKeys.TIMEOUT: 2.0}),
+    }
+    service_pdec_handler_tuple = ("PDEC Handler", op_code_dict_srv_pdec_handler)
+    cmd_dict[CustomServiceList.PDEC_HANDLER.value] = service_pdec_handler_tuple
+
+
+def add_ccsds_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_ccsds_handler = {
+        "0": ("CCSDS Handler: Set low rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "1": ("CCSDS Handler: Set high rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "2": ("CCSDS Handler: Enable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "3": ("CCSDS Handler: Disable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "4": ("CCSDS Handler: Set arbitrary bitrate", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "5": (
+            "CCSDS Handler: Enable tx clock manipulator",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "6": (
+            "CCSDS Handler: Disable tx clock manipulator",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "7": (
+            "CCSDS Handler: Update tx data on rising edge",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "8": (
+            "CCSDS Handler: Update tx data on falling edge",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+    }
+    service_ccsds_handler_tuple = ("CCSDS Handler", op_code_dict_srv_ccsds_handler)
+    cmd_dict[CustomServiceList.CCSDS_HANDLER.value] = service_ccsds_handler_tuple
+
+
+def add_gps_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = {
+        GpsOpCodes.RESET_GNSS.value: ("Reset GPS", {OpCodeDictKeys.TIMEOUT: 2.0})
+    }
+    service_tuple = ("GPS 0", op_code_dict)
+    cmd_dict[CustomServiceList.GPS_0.value] = service_tuple
+    cmd_dict[CustomServiceList.GPS_1.value] = service_tuple
+
+
+def add_str_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_star_tracker = {
+        "0": (
+            "Star Tracker: Mode On, Submode Bootloader",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "1": ("Star Tracker: Mode On, Submode Firmware", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "2": ("Star Tracker: Mode Normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "3": ("Star Tracker: Mode Off", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "4": ("Star Tracker: Mode Raw", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "5": ("Star Tracker: Ping", {OpCodeDictKeys.TIMEOUT: 5.0}),
+        "6": (
+            "Star Tracker: Switch to bootloader program",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "7": ("Star Tracker: Request temperature", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "8": ("Star Tracker: Request version", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "9": ("Star Tracker: Request interface", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "10": ("Star Tracker: Request power", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "11": (
+            "Star Tracker: Set subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "12": (
+            "Star Tracker: Boot image (requires bootloader mode)",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "13": ("Star Tracker: Request time", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "14": ("Star Tracker: Request solution", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "15": ("Star Tracker: Upload image", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "16": ("Star Tracker: Download image", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "17": ("Star Tracker: Set limit parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "18": ("Star Tracker: Set tracking parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "19": ("Star Tracker: Set mounting parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "20": ("Star Tracker: Set camera parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "22": (
+            "Star Tracker: Set centroiding parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "23": ("Star Tracker: Set LISA parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "24": ("Star Tracker: Set matching parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "25": (
+            "Star Tracker: Set validation parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "26": ("Star Tracker: Set algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "27": ("Star Tracker: Take image", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "28": ("Star Tracker: Stop str helper", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "30": (
+            "Star Tracker: Set name of download image",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "31": ("Star Tracker: Request histogram", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "32": ("Star Tracker: Request contrast", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "33": ("Star Tracker: Set json filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "35": ("Star Tracker: Flash read", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "36": ("Star Tracker: Set flash read filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "37": ("Star Tracker: Get checksum", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "49": ("Star Tracker: Request camera parameter", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "50": ("Star Tracker: Request limits", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "51": (
+            "Star Tracker: Set image processor parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "52": (
+            "Star Tracker: (EGSE only) Load camera ground config ",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "53": (
+            "Star Tracker: (EGSE only) Load camera flight config",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "54": (
+            "Star Tracker: Request log level parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "55": (
+            "Star Tracker: Request mounting parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "56": (
+            "Star Tracker: Request image processor parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "57": (
+            "Star Tracker: Request centroiding parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "58": ("Star Tracker: Request lisa parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "59": (
+            "Star Tracker: Request matching parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "60": (
+            "Star Tracker: Request tracking parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "61": (
+            "Star Tracker: Request validation parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "62": ("Star Tracker: Request algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "63": (
+            "Star Tracker: Request subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "64": (
+            "Star Tracker: Request log subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "65": (
+            "Star Tracker: Request debug camera parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "66": ("Star Tracker: Set log level parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "67": (
+            "Star Tracker: Set log subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "68": (
+            "Star Tracker: Set debug camera parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "69": ("Star Tracker: Firmware update", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "70": (
+            "Star Tracker: Disable timestamp generation",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "71": (
+            "Star Tracker: Enable timestamp generation",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+    }
+    service_star_tracker_tuple = ("Star tracker", op_code_dict_srv_star_tracker)
+    cmd_dict[CustomServiceList.STAR_TRACKER.value] = service_star_tracker_tuple
+
+
+def add_syrlinks_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_syrlinks_handler = {
+        "0": ("Syrlinks Handler: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "1": ("Syrlinks Handler: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "2": ("Syrlinks Handler: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "3": ("Syrlinks Handler: Set TX standby", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "4": ("Syrlinks Handler: Set TX modulation", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "5": ("Syrlinks Handler: Set TX carrier wave", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "6": ("Syrlinks Handler: Read TX status", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "7": ("Syrlinks Handler: Read TX waveform", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "8": (
+            "Syrlinks Handler: Read TX AGC value high byte ",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "9": (
+            "Syrlinks Handler: Read TX AGC value low byte ",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "12": (
+            "Syrlinks Handler: Write LCL config",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "13": (
+            "Syrlinks Handler: Read RX status registers",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "14": (
+            "Syrlinks Handler: Read LCL config register",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "15": (
+            "Syrlinks Handler: Set waveform OQPSK",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "16": (
+            "Syrlinks Handler: Set waveform BPSK",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "17": (
+            "Syrlinks Handler: Set second config",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "18": (
+            "Syrlinks Handler: Enable debug output",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "19": (
+            "Syrlinks Handler: Disable debug output",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+    }
+    service_syrlinks_handler_tuple = (
+        "Syrlinks Handler",
+        op_code_dict_srv_syrlinks_handler,
+    )
+    cmd_dict[CustomServiceList.SYRLINKS.value] = service_syrlinks_handler_tuple
+
+
 def add_bpx_cmd_definitions(cmd_dict: ServiceOpCodeDictT):
    op_code_dict = dict()
    add_op_code_entry(
@@ -471,6 +746,12 @@ def add_pcdu_cmds(cmd_dict: ServiceOpCodeDictT):
        info="PDU2 Device",
        op_code_entry=op_code_dict,
    )
+    op_code_dict = {
+        "0": ("ACU: Tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "51": ("ACU: Print channel statistics", {OpCodeDictKeys.TIMEOUT: 2.0}),
+    }
+    service_tuple = ("ACU Devices", op_code_dict)
+    cmd_dict[CustomServiceList.ACU.value] = service_tuple


 def add_imtq_cmds(cmd_dict: ServiceOpCodeDictT):
@@ -489,25 +770,6 @@ def add_imtq_cmds(cmd_dict: ServiceOpCodeDictT):
    cmd_dict[CustomServiceList.IMTQ.value] = service_imtq_tuple


-def add_rw_cmds(cmd_dict: ServiceOpCodeDictT):
-    op_code_dict_srv_rw = {
-        "0": ("Reaction Wheel: Run all commands", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("Reaction Wheel: Set speed", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("Reaction Wheel: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("Reaction Wheel: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("Reaction Wheel: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": (
-            "Reaction Wheel: Send get-telemetry-command",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
-    service_rw_tuple = ("Reaction Wheel", op_code_dict_srv_rw)
-    cmd_dict[CustomServiceList.REACTION_WHEEL_1.value] = service_rw_tuple
-    cmd_dict[CustomServiceList.REACTION_WHEEL_2.value] = service_rw_tuple
-    cmd_dict[CustomServiceList.REACTION_WHEEL_3.value] = service_rw_tuple
-    cmd_dict[CustomServiceList.REACTION_WHEEL_4.value] = service_rw_tuple
-
-
 def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
    op_code_dict_srv_rad_sensor = {
        "0": ("Radiation Sensor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
@@ -612,16 +874,28 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
            {OpCodeDictKeys.TIMEOUT: 2.0},
        ),
        "42": ("PLOC Supervisor: Perform update", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "43": ("PLOC Supervisor: Terminate supervisor process", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "43": (
+            "PLOC Supervisor: Terminate supervisor process",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
        "44": ("PLOC Supervisor: Start MPSoC quiet", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "45": ("PLOC Supervisor: Set shutdown timeout", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "46": ("PLOC Supervisor: Factory flash", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "47": ("PLOC Supervisor: Enable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "48": ("PLOC Supervisor: Disable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "51": ("PLOC Supervisor: Logging request event buffers", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "52": ("PLOC Supervisor: Logging clear counters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "51": (
+            "PLOC Supervisor: Logging request event buffers",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "52": (
+            "PLOC Supervisor: Logging clear counters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
        "53": ("PLOC Supervisor: Logging set topic", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "54": ("PLOC Supervisor: Logging request counters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "54": (
+            "PLOC Supervisor: Logging request counters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
        "55": ("PLOC Supervisor: Request ADC Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "56": ("PLOC Supervisor: Reset PL", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "57": ("PLOC Supervisor: Enable NVMs", {OpCodeDictKeys.TIMEOUT: 2.0}),
@@ -1,7 +1,7 @@
 from tmtccmd.tc.definitions import TcQueueT, QueueCommands
 from config.object_ids import BPX_HANDLER_ID
-from tmtccmd.tc.service_8_functional_cmd import generate_action_command
-from tmtccmd.tc.service_3_housekeeping import generate_one_hk_command, make_sid
+from tmtccmd.tc.pus_8_funccmd import generate_action_command
+from tmtccmd.tc.pus_3_fsfw_hk import generate_one_hk_command, make_sid


 class BpxSetIds:
@@ -2,7 +2,7 @@ import enum

 from tmtccmd.config.definitions import QueueCommands
 from tmtccmd.tc.definitions import TcQueueT
-from tmtccmd.tc.service_8_functional_cmd import generate_action_command
+from tmtccmd.tc.pus_8_funccmd import generate_action_command


 from config.object_ids import GPS_HANDLER_1_ID, GPS_HANDLER_0_ID
@@ -1,59 +1,224 @@
 # -*- coding: utf-8 -*-
-"""
-@file   tmtcc_tc_heater.py
-@brief  Command sequence to test the HeaterHandler
+"""Command sequence to test the HeaterHandler
@author J. Meier
@date   30.01.2021
 """
-from tmtccmd.config.definitions import QueueCommands
+import enum
+
+from config.definitions import CustomServiceList
+from config.object_ids import get_object_ids
+from tmtccmd.utility.obj_id import ObjectId
+from tmtccmd.config.definitions import QueueCommands, ServiceOpCodeDictT
+from tmtccmd.tc.pus_201_fsfw_health import (
+    pack_set_health_cmd_data,
+    FsfwHealth,
+    Subservices,
+)
+from tmtccmd.tc.pus_8_funccmd import generate_action_command
+from tmtccmd.config.globals import add_service_op_code_entry, add_op_code_entry
 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand


 class SwitchNumbers:
-    HEATER_0 = 0
-    HEATER_1 = 1
-    HEATER_2 = 2
-    HEATER_3 = 3
-    HEATER_4 = 4
-    HEATER_5 = 5
-    HEATER_6 = 6
-    HEATER_7 = 7
+    HEATER_0_OBC_BRD = 0
+    HEATER_1_PLOC_PROC_BRD = 1
+    HEATER_2_ACS_BRD = 2
+    HEATER_3_PCDU_PDU = 3
+    HEATER_4_CAMERA = 4
+    HEATER_5_STR = 5
+    HEATER_6_DRO = 6
+    HEATER_7_HPA = 7
    NUMBER_OF_SWITCHES = 8


-class ActionIds:
-    SWITCH_HEATER = bytearray([0x0, 0x0, 0x0, 0x0])
+class OpCodes:
+    HEATER_CMD = ["0", "switch-cmd"]
+    HEATER_EXT_CTRL = ["1", "set-ext-ctrl"]
+    HEATER_FAULTY_CMD = ["2", "set-faulty"]
+    HEATER_HEALTHY_CMD = ["3", "set-healthy"]


-def pack_heater_test_into(object_id: bytearray, tc_queue: TcQueueT):
-    tc_queue.appendleft((QueueCommands.PRINT, "Testing Heater Switching"))
+class Info:
+    HEATER_CMD = "Heater Switch Command"
+    HEATER_EXT_CTRL = "Set to external control"
+    HEATER_FAULTY_CMD = "Set to faulty"
+    HEATER_HEALTHY_CMD = "Set to healthy"

-    heater_number = int(input("Type number of heater to switch [0-7]: "))
-    if heater_number >= SwitchNumbers.NUMBER_OF_SWITCHES or heater_number < 0:
-        print("Invalid heater switch number")
-        return
-    action = int(input("Turn switch on or off? (0 - off, 1 - on): "))
-    if action != 0 and action != 1:
-        print("Invalid action defined. Must be 0 (off) or 1 (on")
-    debug_string = "Switching heater " + str(heater_number)
-    tc_queue.appendleft((QueueCommands.PRINT, debug_string))
-    command = pack_switch_heater_command(object_id, heater_number, action)
-    command = PusTelecommand(service=8, subservice=128, ssc=300, app_data=command)
-    tc_queue.appendleft(command.pack_command_tuple())
+
+# Needed in OBSW to differentiate between external and internal heater commands
+COMMAND_SOURCE_PARAM_EXTERNAL = 1
+
+
+class ActionIds(enum.IntEnum):
+    SWITCH_HEATER = 0
+
+
+def add_heater_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = dict()
+    add_op_code_entry(
+        op_code_dict=op_code_dict, keys=OpCodes.HEATER_CMD, info=Info.HEATER_CMD
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.HEATER_HEALTHY_CMD,
+        info=Info.HEATER_HEALTHY_CMD,
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.HEATER_EXT_CTRL,
+        info=Info.HEATER_EXT_CTRL,
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.HEATER_FAULTY_CMD,
+        info=Info.HEATER_FAULTY_CMD,
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.HEATER.value,
+        info="Heater Device",
+        op_code_entry=op_code_dict,
+    )
+
+
+def pack_heater_cmds(object_id: bytearray, op_code: str, tc_queue: TcQueueT):
+    if op_code in OpCodes.HEATER_CMD:
+        tc_queue.appendleft((QueueCommands.PRINT, "Heater Switching"))
+        heater_number = prompt_heater()
+        while True:
+            action = input("Turn switch on or off? (0 - off, 1 - on): ")
+            if not action.isdigit():
+                print("Switch action not valid")
+                continue
+            action = int(action)
+            if action != 0 and action != 1:
+                print("Invalid action defined. Must be 0 (off) or 1 (on")
+                continue
+            break
+        if action == 1:
+            act_str = "on"
+        else:
+            act_str = "off"
+        debug_string = f"Switching heater {heater_number} {act_str}"
+        tc_queue.appendleft((QueueCommands.PRINT, debug_string))
+        command = pack_switch_heater_command(object_id, heater_number, action)
+        tc_queue.appendleft(command.pack_command_tuple())
+    if op_code in OpCodes.HEATER_EXT_CTRL:
+        heater_number = prompt_heater()
+        obj_id = heater_idx_to_obj(heater_number)
+        health_cmd(
+            tc_queue=tc_queue,
+            object_id=obj_id,
+            health=FsfwHealth.EXTERNAL_CTRL,
+            health_str="External Control",
+            heater_idx=heater_number,
+        )
+    if op_code in OpCodes.HEATER_FAULTY_CMD:
+        heater_number = prompt_heater()
+        obj_id = heater_idx_to_obj(heater_number)
+        health_cmd(
+            tc_queue=tc_queue,
+            object_id=obj_id,
+            health=FsfwHealth.FAULTY,
+            health_str="Faulty",
+            heater_idx=heater_number,
+        )
+    if op_code in OpCodes.HEATER_HEALTHY_CMD:
+        heater_number = prompt_heater()
+        obj_id = heater_idx_to_obj(heater_number)
+        health_cmd(
+            tc_queue=tc_queue,
+            object_id=obj_id,
+            health=FsfwHealth.HEALTHY,
+            health_str="Healthy",
+            heater_idx=heater_number,
+        )
+
+
+def heater_idx_to_obj(heater: int) -> ObjectId:
+    from config.object_ids import (
+        HEATER_0_OBC_BRD,
+        HEATER_1_PLOC_PROC_BRD,
+        HEATER_2_ACS_BRD,
+        HEATER_3_PCDU_BRD,
+        HEATER_4_CAMERA,
+        HEATER_5_STR,
+        HEATER_6_DRO,
+        HEATER_7_HPA,
+    )
+
+    obj_id_array = [
+        HEATER_0_OBC_BRD,
+        HEATER_1_PLOC_PROC_BRD,
+        HEATER_2_ACS_BRD,
+        HEATER_3_PCDU_BRD,
+        HEATER_4_CAMERA,
+        HEATER_5_STR,
+        HEATER_6_DRO,
+        HEATER_7_HPA,
+    ]
+    obj_dict = get_object_ids()
+    obj_id_obj = obj_dict.get(obj_id_array[heater])
+    if obj_id_obj is None:
+        return ObjectId.from_bytes(obj_id_array[heater])
+    return obj_id_obj
+
+
+def prompt_heater() -> int:
+    while True:
+        print("HEATER 0 | PLOC PROC Board")
+        print("HEATER 1 | PCDU Board")
+        print("HEATER 2 | ACS Board")
+        print("HEATER 3 | OBC Board")
+        print("HEATER 4 | CAMERA")
+        print("HEATER 5 | STR")
+        print("HEATER 6 | DRO")
+        print("HEATER 7 | HPA")
+        heater_number = input("Type number of heater to switch [0-7]: ")
+        if not heater_number.isdigit():
+            print("Heater number not a digit")
+            continue
+        heater_number = int(heater_number)
+        if heater_number >= SwitchNumbers.NUMBER_OF_SWITCHES or heater_number < 0:
+            print("Invalid heater switch number")
+            continue
+        break
+    return heater_number
+
+
+def health_cmd(
+    tc_queue: TcQueueT,
+    heater_idx: int,
+    object_id: ObjectId,
+    health: FsfwHealth,
+    health_str: str,
+):
+    tc_queue.appendleft(
+        (
+            QueueCommands.PRINT,
+            f"Setting Heater {heater_idx} {object_id} to {health_str}",
+        )
+    )
+    app_data = pack_set_health_cmd_data(object_id=object_id.as_bytes, health=health)
+    cmd = PusTelecommand(
+        service=201, subservice=Subservices.TC_SET_HEALTH, app_data=app_data
+    )
+    tc_queue.appendleft(cmd.pack_command_tuple())


 def pack_switch_heater_command(
-    object_id: bytearray, switch_nr: int, switch_action: int
-) -> bytearray:
-    """Function to generate the command switch a heater
-    @param object_id    The object id of the HeaterHandler object.
-    @param switch_nr    The switch number identifying the heater to switch
-    @param switch_action    Action to perform. 0 - Sets switch off, 1 - Sets switch on.
+    object_id: bytes, switch_nr: int, switch_action: int
+) -> PusTelecommand:
+    """Function to generate a heater switch command.
+    :param object_id: The object id of the HeaterHandler object.
+    :param switch_nr: The switch number identifying the heater to switch
+    :param switch_action: Action to perform. 0 - Sets switch off, 1 - Sets switch on.
    """
-    action_id = ActionIds.SWITCH_HEATER
    command = bytearray()
-    command += object_id + action_id
    command.append(switch_nr)
    command.append(switch_action)
-    return command
+    command.append(COMMAND_SOURCE_PARAM_EXTERNAL)
+    return generate_action_command(
+        object_id=object_id, action_id=ActionIds.SWITCH_HEATER, app_data=command
+    )
@@ -9,7 +9,7 @@ from tmtccmd.config.definitions import QueueCommands

 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand
-from tmtccmd.tc.service_3_housekeeping import make_sid, generate_one_hk_command
+from tmtccmd.tc.pus_3_fsfw_hk import make_sid, generate_one_hk_command


 class ImtqSetIds:
@@ -7,7 +7,7 @@
 """
 from tmtccmd.config.definitions import QueueCommands
 from tmtccmd.tc.packer import TcQueueT
-from tmtccmd.tc.service_3_housekeeping import (
+from tmtccmd.tc.pus_3_fsfw_hk import (
    generate_one_hk_command,
    make_sid,
    generate_one_diag_command,
@@ -5,7 +5,7 @@
 """
 from tmtccmd.config.definitions import QueueCommands
 from tmtccmd.tc.packer import TcQueueT
-from tmtccmd.tc.service_3_housekeeping import (
+from tmtccmd.tc.pus_3_fsfw_hk import (
    generate_one_hk_command,
    make_sid,
    generate_one_diag_command,
@@ -8,7 +8,7 @@
 """
 from tmtccmd.config.definitions import QueueCommands
 from tmtccmd.tc.packer import TcQueueT
-from tmtccmd.tc.service_3_housekeeping import (
+from tmtccmd.tc.pus_3_fsfw_hk import (
    generate_one_hk_command,
    generate_one_diag_command,
    make_sid,
@@ -14,7 +14,7 @@ from tmtccmd.logging import get_console_logger
 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand
 from utility.input_helper import InputHelper
-from tmtccmd.tc.service_200_mode import pack_mode_data, Modes
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes

 LOGGER = get_console_logger()

@@ -66,7 +66,6 @@ class PlocReplyIds(enum.IntEnum):
    TM_CAM_CMD_RPT = 19


-
 def pack_ploc_mpsoc_commands(
    object_id: bytearray, tc_queue: TcQueueT, op_code: str
 ) -> TcQueueT:
@@ -176,7 +175,11 @@ def pack_ploc_mpsoc_commands(
    elif op_code == "16":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC MPSoC: Tc cam command send"))
        cam_cmd = input("Specify cam command string: ")
-        command = object_id + struct.pack("!I", CommandIds.TC_CAM_CMD_SEND) + bytearray(cam_cmd, 'utf-8')
+        command = (
+            object_id
+            + struct.pack("!I", CommandIds.TC_CAM_CMD_SEND)
+            + bytearray(cam_cmd, "utf-8")
+        )
        command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "17":
@@ -12,7 +12,7 @@ from spacepackets.ecss.tc import PusTelecommand
 from tmtccmd.config.definitions import QueueCommands
 from tmtccmd.tc.packer import TcQueueT
 from tmtccmd.logging import get_console_logger
-from tmtccmd.tc.service_200_mode import pack_mode_data, Modes
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes
 from utility.input_helper import InputHelper

 LOGGER = get_console_logger()
@@ -32,8 +32,14 @@ MANUAL_INPUT = "1"
 update_file_dict = {
    MANUAL_INPUT: ["manual input", ""],
    "2": ["/mnt/sd0/ploc/supervisor/update.bin", "/mnt/sd0/ploc/supervisor/update.bin"],
-    "3": ["/mnt/sd0/ploc/supervisor/update-large.bin", "/mnt/sd0/ploc/supervisor/update-large.bin"],
-    "4": ["/mnt/sd0/ploc/supervisor/update-small.bin", "/mnt/sd0/ploc/supervisor/update-small.bin"],
+    "3": [
+        "/mnt/sd0/ploc/supervisor/update-large.bin",
+        "/mnt/sd0/ploc/supervisor/update-large.bin",
+    ],
+    "4": [
+        "/mnt/sd0/ploc/supervisor/update-small.bin",
+        "/mnt/sd0/ploc/supervisor/update-small.bin",
+    ],
 }

 event_buffer_path_dict = {
@@ -308,55 +314,51 @@ def pack_ploc_supv_commands(
        command = PusTelecommand(service=8, subservice=128, ssc=57, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "43":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Terminate supervisor process"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.TERMINATE_SUPV_HELPER
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Terminate supervisor process")
        )
+        command = object_id + struct.pack("!I", SupvActionIds.TERMINATE_SUPV_HELPER)
        command = PusTelecommand(service=8, subservice=128, ssc=58, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "44":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Start MPSoC quiet"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.START_MPSOC_QUIET
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.START_MPSOC_QUIET)
        command = PusTelecommand(service=8, subservice=128, ssc=59, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "45":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set shutdown timeout"))
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Set shutdown timeout")
+        )
        command = pack_set_shutdown_timeout_command(object_id)
        command = PusTelecommand(service=8, subservice=128, ssc=60, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "46":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Factory flash"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.FACTORY_FLASH
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.FACTORY_FLASH)
        command = PusTelecommand(service=8, subservice=128, ssc=61, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "47":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Enable auto TM"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.ENABLE_AUTO_TM
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.ENABLE_AUTO_TM)
        command = PusTelecommand(service=8, subservice=128, ssc=62, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "48":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Disable auto TM"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.DISABLE_AUTO_TM
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.DISABLE_AUTO_TM)
        command = PusTelecommand(service=8, subservice=128, ssc=63, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "51":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Logging request event buffers"))
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Logging request event buffers")
+        )
        command = pack_logging_buffer_request(object_id)
        command = PusTelecommand(service=8, subservice=128, ssc=66, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "52":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Logging clear counters"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.LOGGING_CLEAR_COUNTERS
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Logging clear counters")
        )
+        command = object_id + struct.pack("!I", SupvActionIds.LOGGING_CLEAR_COUNTERS)
        command = PusTelecommand(service=8, subservice=128, ssc=67, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "53":
@@ -365,18 +367,22 @@ def pack_ploc_supv_commands(
        command = PusTelecommand(service=8, subservice=128, ssc=68, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "54":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Logging request counters"))
-        command = object_id + struct.pack('!I', SupvActionIds.LOGGING_REQUEST_COUNTERS)
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Logging request counters")
+        )
+        command = object_id + struct.pack("!I", SupvActionIds.LOGGING_REQUEST_COUNTERS)
        command = PusTelecommand(service=8, subservice=128, ssc=69, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "55":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Request ADC report"))
-        command = object_id + struct.pack('!I', SupvActionIds.REQUEST_ADC_REPORT)
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Request ADC report")
+        )
+        command = object_id + struct.pack("!I", SupvActionIds.REQUEST_ADC_REPORT)
        command = PusTelecommand(service=8, subservice=128, ssc=70, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "56":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Reset PL"))
-        command = object_id + struct.pack('!I', SupvActionIds.RESET_PL)
+        command = object_id + struct.pack("!I", SupvActionIds.RESET_PL)
        command = PusTelecommand(service=8, subservice=128, ssc=71, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "57":
@@ -580,30 +586,30 @@ def pack_update_command(object_id: bytearray) -> bytearray:
    start_address = int(input("Specify start address: 0x"), 16)
    update_file = get_update_file()
    command += object_id
-    command += struct.pack('!I', SupvActionIds.PERFORM_UPDATE)
-    command += bytearray(update_file, 'utf-8')
+    command += struct.pack("!I", SupvActionIds.PERFORM_UPDATE)
+    command += bytearray(update_file, "utf-8")
    # Adding null terminator
-    command += struct.pack('!B', 0)
-    command += struct.pack('!B', memory_id)
-    command += struct.pack('!I', start_address)
+    command += struct.pack("!B", 0)
+    command += struct.pack("!B", memory_id)
+    command += struct.pack("!I", start_address)
    return command


 def pack_set_shutdown_timeout_command(object_id: bytearray) -> bytearray:
    command = bytearray()
    command += object_id
-    command += struct.pack('!I', SupvActionIds.SET_SHUTDOWN_TIMEOUT)
+    command += struct.pack("!I", SupvActionIds.SET_SHUTDOWN_TIMEOUT)
    timeout = int(input("Specify shutdown timeout (ms): "))
-    command += struct.pack('!I', timeout)
+    command += struct.pack("!I", timeout)
    return command


 def pack_logging_buffer_request(object_id: bytearray) -> bytearray:
    command = bytearray()
    command += object_id
-    command += struct.pack('!I', SupvActionIds.LOGGING_REQUEST_EVENT_BUFFERS)
+    command += struct.pack("!I", SupvActionIds.LOGGING_REQUEST_EVENT_BUFFERS)
    path = get_event_buffer_path()
-    command += bytearray(path, 'utf-8')
+    command += bytearray(path, "utf-8")
    return command


@@ -628,9 +634,9 @@ def pack_read_gpio_cmd(object_id: bytearray) -> bytearray:


 def pack_logging_set_topic(objetc_id: bytearray) -> bytearray:
-    command = objetc_id + struct.pack('!I', SupvActionIds.LOGGING_SET_TOPIC)
+    command = objetc_id + struct.pack("!I", SupvActionIds.LOGGING_SET_TOPIC)
    tpc = int(input("Specify logging topic: "))
-    command += struct.pack('!B', tpc)
+    command += struct.pack("!B", tpc)
    return command


@@ -3,8 +3,8 @@ from typing import Optional

 from tmtccmd.config import QueueCommands
 from tmtccmd.tc.definitions import TcQueueT
-from tmtccmd.tc.service_200_mode import pack_mode_data, Modes, Subservices
-from tmtccmd.tc.service_20_parameter import (
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes, Subservices
+from tmtccmd.tc.pus_20_params import (
    pack_scalar_double_param_app_data,
    pack_fsfw_load_param_cmd,
    pack_boolean_parameter_app_data,
@@ -234,6 +234,6 @@ def pack_pl_pcdu_mode_cmd(tc_queue: TcQueueT, info: str, mode: Modes, submode: i
    )
    mode_data = pack_mode_data(object_id=PL_PCDU_ID, mode=mode, submode=submode)
    mode_cmd = PusTelecommand(
-        service=200, subservice=Subservices.COMMAND_MODE_COMMAND, app_data=mode_data
+        service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=mode_data
    )
    tc_queue.appendleft(mode_cmd.pack_command_tuple())
@@ -11,7 +11,7 @@ from tmtccmd.config.definitions import QueueCommands

 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand
-from pus_tc.service_200_mode import pack_mode_data
+from pus_tc.service_200_mode import pack_mode_data, Modes


 class CommandIds:
@@ -31,19 +31,19 @@ def pack_rad_sensor_test_into(object_id: bytearray, tc_queue: TcQueueT, op_code:

    if op_code == "0":
        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode on"))
-        mode_data = pack_mode_data(object_id, 1, 0)
+        mode_data = pack_mode_data(object_id, Modes.ON, 0)
        command = PusTelecommand(service=200, subservice=1, ssc=41, app_data=mode_data)
        tc_queue.appendleft(command.pack_command_tuple())

    if op_code == "1":
        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode normal"))
-        mode_data = pack_mode_data(object_id, 2, 0)
+        mode_data = pack_mode_data(object_id, Modes.NORMAL, 0)
        command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
        tc_queue.appendleft(command.pack_command_tuple())

    if op_code == "2":
        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode off"))
-        mode_data = pack_mode_data(object_id, 0, 0)
+        mode_data = pack_mode_data(object_id, Modes.OFF, 0)
        command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
        tc_queue.appendleft(command.pack_command_tuple())

@@ -1,21 +1,58 @@
 # -*- coding: utf-8 -*-
-"""
-@file   reaction_wheels.py
+"""reaction_wheels.py
@brief  Tests for the reaction wheel handler
@author J. Meier
@date   20.06.2021
 """
 import struct
-from tmtccmd.config.definitions import QueueCommands
-
+from tmtccmd.config.definitions import QueueCommands, ServiceOpCodeDictT
+from tmtccmd.tc.pus_3_fsfw_hk import (
+    generate_one_hk_command,
+    generate_one_diag_command,
+    make_sid,
+)
+from tmtccmd.config.globals import add_op_code_entry, add_service_op_code_entry
 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand
-from pus_tc.service_200_mode import pack_mode_data
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes, Subservices
+from config.definitions import CustomServiceList
+
+
+class OpCodesDevs:
+    SPEED = ["0", "speed"]
+    ON = ["1", "on"]
+    NML = ["2", "nml"]
+    OFF = ["3", "off"]
+    GET_STATUS = ["4", "status"]
+    GET_TM = ["5", "tm"]
+
+
+class InfoDevs:
+    SPEED = "Set speed"
+    ON = "Set On"
+    NML = "Set Normal"
+    OFF = "Set Off"
+    GET_STATUS = "Get Status HK"
+    GET_TM = "Get TM HK"
+
+
+class OpCodesAss:
+    ON = ["0", "on"]
+    NML = ["1", "nml"]
+    OFF = ["2", "off"]
+
+
+class InfoAss:
+    ON = "Mode On: 3/4 RWs min. on"
+    NML = "Mode Normal: 3/4 RWs min. normal"
+    OFF = "Mode Off: All RWs off"


 class RwSetIds:
    STATUS_SET_ID = 4
    TEMPERATURE_SET_ID = 8
+    LAST_RESET = 2
+    TM_SET = 9


 class RwCommandIds:
@@ -38,66 +75,138 @@ class RampTime:
    MS_1000 = 1000


-def pack_single_rw_test_into(
-    object_id: bytearray, tc_queue: TcQueueT, op_code: str
-) -> TcQueueT:
-    tc_queue.appendleft(
-        (
-            QueueCommands.PRINT,
-            "Testing reaction wheel handler with object id: 0x" + object_id.hex(),
-        )
+def add_rw_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = dict()
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=InfoDevs.SPEED, keys=OpCodesDevs.SPEED
+    )
+    add_op_code_entry(op_code_dict=op_code_dict, info=InfoDevs.ON, keys=OpCodesDevs.ON)
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=InfoDevs.OFF, keys=OpCodesDevs.OFF
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=InfoDevs.NML, keys=OpCodesDevs.NML
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=InfoDevs.GET_STATUS, keys=OpCodesDevs.GET_STATUS
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=InfoDevs.GET_TM, keys=OpCodesDevs.GET_TM
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.REACTION_WHEEL_1.value,
+        op_code_entry=op_code_dict,
+        info="Reaction Wheel 1",
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.REACTION_WHEEL_2.value,
+        op_code_entry=op_code_dict,
+        info="Reaction Wheel 2",
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.REACTION_WHEEL_3.value,
+        op_code_entry=op_code_dict,
+        info="Reaction Wheel 3",
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.REACTION_WHEEL_4.value,
+        op_code_entry=op_code_dict,
+        info="Reaction Wheel 4",
+    )
+    op_code_dict = dict()
+    add_op_code_entry(op_code_dict=op_code_dict, info=InfoAss.ON, keys=OpCodesAss.ON)
+    add_op_code_entry(op_code_dict=op_code_dict, info=InfoAss.NML, keys=OpCodesAss.NML)
+    add_op_code_entry(op_code_dict=op_code_dict, info=InfoAss.OFF, keys=OpCodesAss.OFF)
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.RW_ASSEMBLY.value,
+        op_code_entry=op_code_dict,
+        info="Reaction Wheel Assembly",
    )

-    if op_code == "0" or op_code == "1":
+
+def pack_single_rw_test_into(
+    object_id: bytes, rw_idx: int, tc_queue: TcQueueT, op_code: str
+) -> TcQueueT:
+    if op_code in OpCodesDevs.SPEED:
        speed = int(input("Specify speed [0.1 RPM]: "))
        ramp_time = int(input("Specify ramp time [ms]: "))
-        tc_queue.appendleft((QueueCommands.PRINT, "Reaction Wheel: Set speed"))
+        tc_queue.appendleft((QueueCommands.PRINT, f"RW {rw_idx}: {InfoDevs.SPEED}"))
        command = pack_set_speed_command(object_id, speed, ramp_time)
        command = PusTelecommand(service=8, subservice=128, ssc=40, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())

-    if op_code == "2":
-        tc_queue.appendleft((QueueCommands.PRINT, "Reaction Wheel: Switch to mode on"))
-        mode_data = pack_mode_data(object_id, 1, 0)
+    if op_code in OpCodesDevs.ON:
+        tc_queue.appendleft((QueueCommands.PRINT, f"RW {rw_idx}: {InfoDevs.ON}"))
+        mode_data = pack_mode_data(object_id, Modes.ON, 0)
        command = PusTelecommand(service=200, subservice=1, ssc=41, app_data=mode_data)
        tc_queue.appendleft(command.pack_command_tuple())

-    if op_code == "3":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "Reaction Wheel: Switch to mode normal")
-        )
-        mode_data = pack_mode_data(object_id, 2, 0)
+    if op_code in OpCodesDevs.NML:
+        tc_queue.appendleft((QueueCommands.PRINT, f"RW {rw_idx}: {InfoDevs.NML}"))
+        mode_data = pack_mode_data(object_id, Modes.NORMAL, 0)
        command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
        tc_queue.appendleft(command.pack_command_tuple())

-    if op_code == "4":
-        tc_queue.appendleft((QueueCommands.PRINT, "Reaction Wheel: Switch to mode off"))
-        mode_data = pack_mode_data(object_id, 0, 0)
+    if op_code in OpCodesDevs.OFF:
+        tc_queue.appendleft((QueueCommands.PRINT, f"RW {rw_idx}: {InfoDevs.OFF}"))
+        mode_data = pack_mode_data(object_id, Modes.OFF, 0)
        command = PusTelecommand(service=200, subservice=1, ssc=43, app_data=mode_data)
        tc_queue.appendleft(command.pack_command_tuple())

-    if op_code == "5":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "Reaction Wheel: Send get-telemetry-command")
+    if op_code in OpCodesDevs.GET_TM:
+        tc_queue.appendleft((QueueCommands.PRINT, f"RW {rw_idx}: {InfoDevs.GET_TM}"))
+        command = generate_one_hk_command(
+            sid=make_sid(object_id=object_id, set_id=RwSetIds.TM_SET), ssc=0
+        )
+        tc_queue.appendleft(command.pack_command_tuple())
+    if op_code in OpCodesDevs.GET_STATUS:
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, f"RW {rw_idx}: {InfoDevs.GET_STATUS}")
+        )
+        command = generate_one_diag_command(
+            sid=make_sid(object_id=object_id, set_id=RwSetIds.STATUS_SET_ID), ssc=0
        )
-        command = object_id + RwCommandIds.GET_TM
-        command = PusTelecommand(service=8, subservice=128, ssc=44, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    return tc_queue


-def pack_set_speed_command(
-    object_id: bytearray, speed: int, ramp_time: int
-) -> bytearray:
+def pack_rw_ass_cmds(tc_queue: TcQueueT, object_id: bytes, op_code: str):
+    if op_code in OpCodesAss.OFF:
+        data = pack_mode_data(object_id=object_id, mode=Modes.OFF, submode=0)
+        cmd = PusTelecommand(
+            service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=data
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+    if op_code in OpCodesAss.ON:
+        data = pack_mode_data(object_id=object_id, mode=Modes.ON, submode=0)
+        cmd = PusTelecommand(
+            service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=data
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+    if op_code in OpCodesAss.NML:
+        data = pack_mode_data(object_id=object_id, mode=Modes.NORMAL, submode=0)
+        cmd = PusTelecommand(
+            service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=data
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+
+
+def pack_set_speed_command(object_id: bytes, speed: int, ramp_time: int) -> bytearray:
    """With this function a command is packed to set the speed of a reaction wheel
-    @param object_id    The object id of the reaction wheel handler.
-    @param speed   Valid speeds are [-65000, -1000] and [1000, 65000]. Values are specified in 0.1 * RPM
-    @param ramp_time   The time after which the reaction wheel will reached the commanded speed. Valid times are
-                       10 - 10000 ms
+    :param object_id: The object id of the reaction wheel handler.
+    :param speed: Valid speeds are [-65000, -1000] and [1000, 65000]. Values are
+        specified in 0.1 * RPM
+    :param ramp_time: The time after which the reaction wheel will reached the commanded speed.
+        Valid times are 10 - 10000 ms
    """
    command_id = RwCommandIds.SET_SPEED
    command = bytearray()
-    command = object_id + command_id
+    command += object_id + command_id
    command = command + struct.pack("!i", speed)
    command = command + ramp_time.to_bytes(length=2, byteorder="big")
    return command
@@ -11,7 +11,7 @@ from tmtccmd.config.definitions import QueueCommands

 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand
-from tmtccmd.tc.service_200_mode import pack_mode_data, Modes
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes
 from tmtccmd.logging import get_console_logger
 from utility.input_helper import InputHelper

@@ -8,9 +8,9 @@

 from tmtccmd.config.definitions import QueueCommands
 from tmtccmd.tc.definitions import TcQueueT
-from tmtccmd.tc.service_3_housekeeping import make_sid, generate_one_hk_command
+from tmtccmd.tc.pus_3_fsfw_hk import make_sid, generate_one_hk_command
 from spacepackets.ecss.tc import PusTelecommand
-from tmtccmd.tc.service_200_mode import pack_mode_data, Modes
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes
 import struct


@@ -64,17 +64,17 @@ def pack_syrlinks_command(
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "3":
        tc_queue.appendleft((QueueCommands.PRINT, "syrlinks: Set TX mode standby"))
-        command = object_id + struct.pack('!I', CommandIds.SET_TX_MODE_STANDBY)
+        command = object_id + struct.pack("!I", CommandIds.SET_TX_MODE_STANDBY)
        command = PusTelecommand(service=8, subservice=128, ssc=10, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "4":
        tc_queue.appendleft((QueueCommands.PRINT, "syrlinks: Set TX mode modulation"))
-        command = object_id + struct.pack('!I', CommandIds.SET_TX_MODE_MODULATION)
+        command = object_id + struct.pack("!I", CommandIds.SET_TX_MODE_MODULATION)
        command = PusTelecommand(service=8, subservice=128, ssc=11, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "5":
        tc_queue.appendleft((QueueCommands.PRINT, "syrlinks: Set TX mode CW"))
-        command = object_id + struct.pack('!I', CommandIds.SET_TX_MODE_CW)
+        command = object_id + struct.pack("!I", CommandIds.SET_TX_MODE_CW)
        command = PusTelecommand(service=8, subservice=128, ssc=12, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "6":
@@ -89,26 +89,26 @@ def pack_syrlinks_command(
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "8":
        tc_queue.appendleft((QueueCommands.PRINT, "Syrlinks: Read TX status"))
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_STATUS)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_STATUS)
        command = PusTelecommand(service=8, subservice=128, ssc=13, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "9":
        tc_queue.appendleft((QueueCommands.PRINT, "Syrlinks: Read TX waveform"))
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_WAVEFORM)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_WAVEFORM)
        command = PusTelecommand(service=8, subservice=128, ssc=14, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "10":
        tc_queue.appendleft(
            (QueueCommands.PRINT, "Syrlinks: Read TX AGC value high byte")
        )
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_AGC_VALUE_HIGH_BYTE)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_AGC_VALUE_HIGH_BYTE)
        command = PusTelecommand(service=8, subservice=128, ssc=15, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "11":
        tc_queue.appendleft(
            (QueueCommands.PRINT, "Syrlinks: Read TX AGC value low byte")
        )
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_AGC_VALUE_LOW_BYTE)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_AGC_VALUE_LOW_BYTE)
        command = PusTelecommand(service=8, subservice=128, ssc=16, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "12":
@@ -8,7 +8,7 @@
 from tmtccmd.config.definitions import QueueCommands
 from spacepackets.ecss.tc import PusTelecommand
 from tmtccmd.tc.packer import TcQueueT
-from tmtccmd.tc.service_200_mode import pack_mode_data
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes
 from config.object_ids import TEST_DEVICE_ID

 TEST_DEVICE_OBJ_ID = TEST_DEVICE_ID
@@ -20,22 +20,22 @@ def pack_service200_test_into(tc_queue: TcQueueT) -> TcQueueT:
    obj_id = TEST_DEVICE_OBJ_ID
    # Set On Mode
    tc_queue.appendleft((QueueCommands.PRINT, "Testing Service 200: Set Mode On"))
-    mode_data = pack_mode_data(obj_id, 1, 0)
+    mode_data = pack_mode_data(obj_id, Modes.ON, 0)
    command = PusTelecommand(service=200, subservice=1, ssc=2000, app_data=mode_data)
    tc_queue.appendleft(command.pack_command_tuple())
    # Set Normal mode
    tc_queue.appendleft((QueueCommands.PRINT, "Testing Service 200: Set Mode Normal"))
-    mode_data = pack_mode_data(obj_id, 2, 0)
+    mode_data = pack_mode_data(obj_id, Modes.NORMAL, 0)
    command = PusTelecommand(service=200, subservice=1, ssc=2010, app_data=mode_data)
    tc_queue.appendleft(command.pack_command_tuple())
    # Set Raw Mode
    tc_queue.appendleft((QueueCommands.PRINT, "Testing Service 200: Set Mode Raw"))
-    mode_data = pack_mode_data(obj_id, 3, 0)
+    mode_data = pack_mode_data(obj_id, Modes.RAW, 0)
    command = PusTelecommand(service=200, subservice=1, ssc=2020, app_data=mode_data)
    tc_queue.appendleft(command.pack_command_tuple())
    # Set Off Mode
    tc_queue.appendleft((QueueCommands.PRINT, "Testing Service 200: Set Mode Off"))
-    mode_data = pack_mode_data(obj_id, 0, 0)
+    mode_data = pack_mode_data(obj_id, Modes.OFF, 0)
    command = PusTelecommand(service=200, subservice=1, ssc=2030, app_data=mode_data)
    tc_queue.appendleft(command.pack_command_tuple())
    tc_queue.appendleft((QueueCommands.EXPORT_LOG, "log/tmtc_log_service200.txt"))
@@ -1,6 +1,6 @@
 import enum
 from tmtccmd.tc.definitions import TcQueueT
-from tmtccmd.tc.service_200_mode import Modes
+from tmtccmd.tc.pus_200_fsfw_modes import Modes
 from config.object_ids import ACS_BOARD_ASS_ID, SUS_BOARD_ASS_ID

 from .common import command_assembly
@@ -1,6 +1,6 @@
 from tmtccmd.tc.definitions import TcQueueT, QueueCommands
 from spacepackets.ecss.tc import PusTelecommand
-from tmtccmd.tc.service_200_mode import pack_mode_data, Modes, Subservices
+from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes, Subservices


 def command_assembly(
@@ -13,6 +13,6 @@ def command_assembly(
        submode=submode,
    )
    cmd = PusTelecommand(
-        service=200, subservice=Subservices.COMMAND_MODE_COMMAND, app_data=mode_data
+        service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=mode_data
    )
    tc_queue.appendleft(cmd.pack_command_tuple())
@@ -2,9 +2,9 @@ import enum

 from tmtccmd.config.definitions import QueueCommands
 from tmtccmd.tc.definitions import TcQueueT
-from tmtccmd.tc.service_8_functional_cmd import generate_action_command
+from tmtccmd.tc.pus_8_funccmd import generate_action_command
 from tmtccmd.logging import get_console_logger
-from tmtccmd.tc.service_3_housekeeping import make_sid, generate_one_hk_command
+from tmtccmd.tc.pus_3_fsfw_hk import make_sid, generate_one_hk_command
 from config.object_ids import CORE_CONTROLLER_ID

 LOGGER = get_console_logger()
@@ -1,5 +1,5 @@
 from tmtccmd.tc.definitions import TcQueueT, QueueCommands
-from tmtccmd.tc.service_200_mode import Modes
+from tmtccmd.tc.pus_200_fsfw_modes import Modes

 from .common import command_assembly
 from config.object_ids import TCS_BOARD_ASS_ID
@@ -7,12 +7,12 @@ from typing import Union

 from spacepackets.ecss import PusTelecommand
 from tmtccmd.com_if.com_interface_base import CommunicationInterface
-from tmtccmd.config.definitions import CoreServiceList
+from tmtccmd.config.definitions import CoreServiceList, QueueCommands
 from tmtccmd.logging import get_console_logger
 from tmtccmd.logging.pus import log_raw_pus_tc
 from tmtccmd.tc.definitions import TcQueueT
-from tmtccmd.tc.service_5_event import pack_generic_service5_test_into
-from tmtccmd.pus.service_17_test import pack_service_17_ping_command
+from tmtccmd.tc.pus_5_event import pack_generic_service5_test_into
+from tmtccmd.pus.pus_17_test import pack_service_17_ping_command
 from tmtccmd.logging import get_current_time_string

 from pus_tc.service_200_mode import pack_service200_test_into
@@ -26,8 +26,8 @@ from pus_tc.devs.imtq import pack_imtq_test_into
 from pus_tc.devs.tmp1075 import pack_tmp1075_test_into
 from pus_tc.devs.ploc_mpsoc import pack_ploc_mpsoc_commands
 from pus_tc.devs.ploc_supervisor import pack_ploc_supv_commands
-from pus_tc.devs.heater import pack_heater_test_into
-from pus_tc.devs.reaction_wheels import pack_single_rw_test_into
+from pus_tc.devs.heater import pack_heater_cmds
+from pus_tc.devs.reaction_wheels import pack_single_rw_test_into, pack_rw_ass_cmds
 from pus_tc.devs.rad_sensor import pack_rad_sensor_test_into
 from pus_tc.devs.ploc_upater import pack_ploc_updater_test_into
 from pus_tc.devs.ploc_memory_dumper import pack_ploc_memory_dumper_cmd
@@ -68,6 +68,7 @@ from config.object_ids import (
    STR_IMG_HELPER_ID,
    SYRLINKS_HANDLER_ID,
    SOLAR_ARRAY_DEPLOYMENT_ID,
+    RW_ASSEMBLY,
 )


@@ -75,19 +76,22 @@ LOGGER = get_console_logger()


 def pre_tc_send_cb(
-    packet: bytes,
+    queue_entry: Union[bytes, QueueCommands],
    com_if: CommunicationInterface,
-    pus_info: Union[PusTelecommand, any],
+    queue_info: Union[PusTelecommand, any],
    file_logger: logging.Logger,
 ):
-    log_raw_pus_tc(
-        packet=packet, srv_subservice=(pus_info.service, pus_info.subservice)
-    )
-    tc_info_string = f"Sent {pus_info}"
-    LOGGER.info(tc_info_string)
-    file_logger.info(f"{get_current_time_string(True)}: {tc_info_string}")
-    com_if.send(data=packet)
-
+    if isinstance(queue_entry, bytes) or isinstance(queue_entry, bytearray):
+        log_raw_pus_tc(
+            packet=queue_entry, srv_subservice=(queue_info.service, queue_info.subservice)
+        )
+        tc_info_string = f"Sent {queue_info}"
+        LOGGER.info(tc_info_string)
+        file_logger.info(f"{get_current_time_string(True)}: {tc_info_string}")
+        com_if.send(data=queue_entry)
+    elif isinstance(queue_entry, QueueCommands):
+        if queue_entry == QueueCommands.PRINT:
+            file_logger.info(queue_info)

 def pack_service_queue_user(
    service: Union[str, int], op_code: str, service_queue: TcQueueT
@@ -134,7 +138,9 @@ def pack_service_queue_user(
        )
    if service == CustomServiceList.HEATER.value:
        object_id = HEATER_ID
-        return pack_heater_test_into(object_id=object_id, tc_queue=service_queue)
+        return pack_heater_cmds(
+            object_id=object_id, tc_queue=service_queue, op_code=op_code
+        )
    if service == CustomServiceList.IMTQ.value:
        object_id = IMTQ_HANDLER_ID
        return pack_imtq_test_into(
@@ -146,24 +152,20 @@ def pack_service_queue_user(
            object_id=object_id, tc_queue=service_queue, op_code=op_code
        )
    if service == CustomServiceList.REACTION_WHEEL_1.value:
-        object_id = RW1_ID
        return pack_single_rw_test_into(
-            object_id=object_id, tc_queue=service_queue, op_code=op_code
+            object_id=RW1_ID, rw_idx=1, tc_queue=service_queue, op_code=op_code
        )
    if service == CustomServiceList.REACTION_WHEEL_2.value:
-        object_id = RW2_ID
        return pack_single_rw_test_into(
-            object_id=object_id, tc_queue=service_queue, op_code=op_code
+            object_id=RW2_ID, rw_idx=2, tc_queue=service_queue, op_code=op_code
        )
    if service == CustomServiceList.REACTION_WHEEL_3.value:
-        object_id = RW3_ID
        return pack_single_rw_test_into(
-            object_id=object_id, tc_queue=service_queue, op_code=op_code
+            object_id=RW3_ID, rw_idx=3, tc_queue=service_queue, op_code=op_code
        )
    if service == CustomServiceList.REACTION_WHEEL_4.value:
-        object_id = RW4_ID
        return pack_single_rw_test_into(
-            object_id=object_id, tc_queue=service_queue, op_code=op_code
+            object_id=RW4_ID, rw_idx=4, tc_queue=service_queue, op_code=op_code
        )
    if service == CustomServiceList.RAD_SENSOR.value:
        object_id = RAD_SENSOR_ID
@@ -233,6 +235,10 @@ def pack_service_queue_user(
        return pack_tcs_sys_commands(tc_queue=service_queue, op_code=op_code)
    if service == CustomServiceList.TIME.value:
        return pack_set_current_time_ascii_command(tc_queue=service_queue, ssc=0)
+    if service == CustomServiceList.RW_ASSEMBLY.value:
+        return pack_rw_ass_cmds(
+            tc_queue=service_queue, object_id=RW_ASSEMBLY, op_code=op_code
+        )
    LOGGER.warning("Invalid Service !")


@@ -75,7 +75,10 @@ def handle_ploc_replies(
        printer.file_logger.info(content_list)
    elif action_id == PlocReplyIds.TM_CAM_CMD_RPT:
        header_list = ["Camera reply string", "ACK"]
-        content_list = [custom_data[:len(custom_data) - 1].decode('utf-8'), hex(custom_data[-1])]
+        content_list = [
+            custom_data[: len(custom_data) - 1].decode("utf-8"),
+            hex(custom_data[-1]),
+        ]
        print(header_list)
        print(content_list)
        printer.file_logger.info(header_list)
@@ -95,7 +98,7 @@ def handle_supervisor_replies(
        printer.file_logger.info(content_list)
    elif action_id == SupvActionIds.READ_GPIO:
        header_list = ["GPIO state"]
-        content_list = [struct.unpack('!H', custom_data[:2])[0]]
+        content_list = [struct.unpack("!H", custom_data[:2])[0]]
        print(header_list)
        print(content_list)
        printer.file_logger.info(header_list)
@@ -0,0 +1,15 @@
+from tmtccmd.utility.tmtc_printer import FsfwTmTcPrinter
+
+
+class PrintWrapper:
+    def __init__(self, printer: FsfwTmTcPrinter):
+        self.printer = printer
+
+    def dlog(self, string: str):
+        print(string)
+        self.printer.file_logger.info(string)
+
+
+def log_to_both(printer: FsfwTmTcPrinter, string: str):
+    print(string)
+    printer.file_logger.info(string)
@@ -0,0 +1,124 @@
+import struct
+
+from pus_tm.defs import PrintWrapper, FsfwTmTcPrinter
+from tmtccmd.utility.obj_id import ObjectId
+
+
+def handle_rw_hk_data(
+    printer: FsfwTmTcPrinter, object_id: ObjectId, set_id: int, hk_data: bytes
+):
+    from pus_tc.devs.reaction_wheels import RwSetIds
+
+    pw = PrintWrapper(printer)
+    current_idx = 0
+    if set_id == RwSetIds.STATUS_SET_ID:
+        pw.dlog(
+            f"Received Status HK (ID {set_id}) from Reaction Wheel {object_id.name}"
+        )
+        fmt_str = "!IiiBB"
+        inc_len = struct.calcsize(fmt_str)
+        (temp, speed, ref_speed, state, clc_mode) = struct.unpack(
+            fmt_str, hk_data[current_idx : current_idx + inc_len]
+        )
+        current_idx += inc_len
+        speed_rpm = speed / 10.0
+        ref_speed_rpm = ref_speed / 10.0
+        pw.dlog(
+            f"Temperature {temp} C | Speed {speed_rpm} rpm | Reference Speed {ref_speed_rpm} rpm"
+        )
+        pw.dlog(
+            f"State {state}. 0: Error, 1: Idle, 2: Coasting, 3: Running, speed stable, "
+            f"4: Running, speed  changing"
+        )
+        pw.dlog(
+            f"Current Limit Control mode {clc_mode}. 0: Low Current Mode (0.3 A), "
+            f"1: High Current Mode (0.6 A)"
+        )
+        printer.print_validity_buffer(hk_data[current_idx:], 5)
+    if set_id == RwSetIds.LAST_RESET:
+        pw.dlog(
+            f"Received Last Reset HK (ID {set_id}) from Reaction Wheel {object_id.name}"
+        )
+        fmt_str = "!BB"
+        inc_len = struct.calcsize(fmt_str)
+        (last_not_cleared_reset_status, current_reset_status) = struct.unpack(
+            fmt_str, hk_data[current_idx : current_idx + inc_len]
+        )
+        current_idx += inc_len
+        pw.dlog(
+            f"Last Non-Cleared (Cached) Reset Status {last_not_cleared_reset_status} | "
+            f"Current Reset Status {current_reset_status}"
+        )
+    if set_id == RwSetIds.TM_SET:
+        pw.dlog(f"Received TM HK (ID {set_id}) from Reaction Wheel {object_id.name}")
+        fmt_str = "!BiffBBiiIIIIIIIIIIIIIIII"
+        inc_len = struct.calcsize(fmt_str)
+        (
+            last_reset_status,
+            mcu_temp,
+            pressure_sens_temp,
+            pressure,
+            state,
+            clc_mode,
+            current_speed,
+            ref_speed,
+            num_invalid_crc_packets,
+            num_invalid_len_packets,
+            num_invalid_cmd_packets,
+            num_of_cmd_executed_requests,
+            num_of_cmd_replies,
+            uart_num_of_bytes_written,
+            uart_num_of_bytes_read,
+            uart_num_parity_errors,
+            uart_num_noise_errors,
+            uart_num_frame_errors,
+            uart_num_reg_overrun_errors,
+            uart_total_num_errors,
+            spi_num_bytes_written,
+            spi_num_bytes_read,
+            spi_num_reg_overrun_errors,
+            spi_total_num_errors,
+        ) = struct.unpack(fmt_str, hk_data[current_idx : current_idx + inc_len])
+
+        pw.dlog(
+            f"MCU Temperature {mcu_temp} | Pressure Sensore Temperature {pressure_sens_temp} C"
+        )
+        pw.dlog(f"Last Reset Status {last_reset_status}")
+        pw.dlog(
+            f"Current Limit Control mode {clc_mode}. 0: Low Current Mode (0.3 A), "
+            f"1: High Current Mode (0.6 A)"
+        )
+        pw.dlog(f"Speed {current_speed} rpm | Reference Speed {ref_speed} rpm")
+        pw.dlog(
+            f"State {state}. 0: Error, 1: Idle, 2: Coasting, 3: Running, speed stable, "
+            f"4: Running, speed  changing"
+        )
+        pw.dlog(f"Number Of Invalid Packets:")
+        pw.dlog("CRC | Length | CMD")
+        pw.dlog(
+            f"{num_invalid_crc_packets} | {num_invalid_len_packets} | {num_invalid_cmd_packets}"
+        )
+        pw.dlog(
+            f"Num Of CMD Executed Requests {num_of_cmd_executed_requests} | "
+            f"Num of CMD Replies {num_of_cmd_replies}"
+        )
+        pw.dlog("UART COM information:")
+        pw.dlog(
+            f"NumBytesWritten | NumBytesRead | ParityErrs | NoiseErrs | FrameErrs | "
+            f"RegOverrunErrs | TotalErrs"
+        )
+        pw.dlog(
+            f"{uart_num_of_bytes_written} | {uart_num_of_bytes_read} | {uart_num_parity_errors} | "
+            f"{uart_num_noise_errors} | {uart_num_frame_errors} | {uart_num_reg_overrun_errors} | "
+            f"{uart_total_num_errors}"
+        )
+        pw.dlog("SPI COM Info:")
+        pw.dlog(f"NumBytesWritten | NumBytesRead | RegOverrunErrs | TotalErrs")
+        pw.dlog(
+            f"{spi_num_bytes_written} | {spi_num_bytes_read} | {spi_num_reg_overrun_errors} | "
+            f"{spi_total_num_errors}"
+        )
+        if current_idx > 0:
+            printer.print_validity_buffer(
+                validity_buffer=hk_data[current_idx:], num_vars=27
+            )
@@ -9,9 +9,9 @@ from tmtccmd.logging.pus import (
    create_tmtc_logger,
 )

-from tmtccmd.pus.service_17_test import Service17TMExtended
-from tmtccmd.tm.service_20_fsfw_parameters import Service20FsfwTm
-from tmtccmd.tm.service_200_fsfw_mode import Service200FsfwTm
+from tmtccmd.tm.pus_17_test import Service17TMExtended
+from tmtccmd.tm.pus_20_fsfw_parameters import Service20FsfwTm
+from tmtccmd.tm.pus_200_fsfw_modes import Service200FsfwTm
 from tmtccmd.utility.tmtc_printer import PrintFormats, FsfwTmTcPrinter

 from config.definitions import PUS_APID
@@ -5,7 +5,7 @@ import datetime

 from tmtccmd.utility.tmtc_printer import FsfwTmTcPrinter
 from tmtccmd.config.definitions import HkReplyUnpacked
-from tmtccmd.tm.service_3_fsfw_housekeeping import (
+from tmtccmd.tm.pus_3_fsfw_hk import (
    Service3Base,
    HkContentType,
    Service3FsfwTm,
@@ -15,9 +15,11 @@ from pus_tc.devs.bpx_batt import BpxSetIds
 from pus_tc.devs.syrlinks_hk_handler import SetIds
 from pus_tc.devs.p60dock import SetIds
 from pus_tc.devs.imtq import ImtqSetIds
-from tmtccmd.pus.obj_id import ObjectId, ObjectIdDictT
+from tmtccmd.utility.obj_id import ObjectId, ObjectIdDictT
 import config.object_ids as obj_ids

+from pus_tm.devs.reaction_wheels import handle_rw_hk_data
+from pus_tm.defs import PrintWrapper, FsfwTmTcPrinter, log_to_both

 LOGGER = get_console_logger()

@@ -55,40 +57,46 @@ def handle_regular_hk_print(
    hk_packet: Service3Base,
    hk_data: bytes,
 ):
-    object_id = object_id.as_bytes
+    objb = object_id.as_bytes
    set_id = hk_packet.set_id
    """This function is called when a Service 3 Housekeeping packet is received."""
-    if object_id == obj_ids.SYRLINKS_HANDLER_ID:
+    if object_id in [obj_ids.RW1_ID, obj_ids.RW2_ID, obj_ids.RW3_ID, obj_ids.RW4_ID]:
+        handle_rw_hk_data(printer, object_id, set_id, hk_data)
+    if objb == obj_ids.SYRLINKS_HANDLER_ID:
        if set_id == SetIds.RX_REGISTERS_DATASET:
            return handle_syrlinks_rx_registers_dataset(printer, hk_data)
        elif set_id == SetIds.TX_REGISTERS_DATASET:
            return handle_syrlinks_tx_registers_dataset(printer, hk_data)
        else:
            LOGGER.info("Service 3 TM: Syrlinks handler reply with unknown set id")
-    elif object_id == obj_ids.IMTQ_HANDLER_ID:
+    if objb == obj_ids.IMTQ_HANDLER_ID:
        if (set_id >= ImtqSetIds.POSITIVE_X_TEST) and (
            set_id <= ImtqSetIds.NEGATIVE_Z_TEST
        ):
            return handle_self_test_data(printer, hk_data)
        else:
            LOGGER.info("Service 3 TM: Syrlinks handler reply with unknown set id")
-    elif object_id == obj_ids.GPS_HANDLER_0_ID or object_id == obj_ids.GPS_HANDLER_1_ID:
+    if objb == obj_ids.GPS_HANDLER_0_ID or object_id == obj_ids.GPS_HANDLER_1_ID:
        handle_gps_data(printer=printer, hk_data=hk_data)
-    elif object_id == obj_ids.BPX_HANDLER_ID:
+    if objb == obj_ids.BPX_HANDLER_ID:
        handle_bpx_hk_data(hk_data=hk_data, set_id=set_id, printer=printer)
-    elif object_id == obj_ids.CORE_CONTROLLER_ID:
+    if objb == obj_ids.CORE_CONTROLLER_ID:
        return handle_core_hk_data(printer=printer, hk_data=hk_data)
-    elif object_id == obj_ids.PDU_1_HANDLER_ID:
+    if objb == obj_ids.PDU_1_HANDLER_ID:
        return handle_pdu_data(
            printer=printer, pdu_idx=1, set_id=set_id, hk_data=hk_data
        )
-    elif object_id == obj_ids.PDU_2_HANDLER_ID:
+    if objb == obj_ids.PDU_2_HANDLER_ID:
        return handle_pdu_data(
            printer=printer, pdu_idx=2, set_id=set_id, hk_data=hk_data
        )
-    elif object_id == obj_ids.P60_DOCK_HANDLER:
+    if objb in [obj_ids.RW1_ID, obj_ids.RW2_ID, obj_ids.RW3_ID, obj_ids.RW4_ID]:
+        return handle_rw_hk_data(
+            printer=printer, object_id=object_id, set_id=set_id, hk_data=hk_data
+        )
+    if objb == obj_ids.P60_DOCK_HANDLER:
        handle_p60_hk_data(printer=printer, set_id=set_id, hk_data=hk_data)
-    elif object_id == obj_ids.PL_PCDU_ID:
+    if objb == obj_ids.PL_PCDU_ID:
        log_to_both(printer, "Received PL PCDU HK data")
    else:
        LOGGER.info("Service 3 TM: Parsing for this SID has not been implemented.")
@@ -700,8 +708,3 @@ def handle_p60_hk_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
        printer.print_validity_buffer(
            validity_buffer=hk_data[current_idx:], num_vars=27
        )
-
-
-def log_to_both(printer: FsfwTmTcPrinter, string: str):
-    print(string)
-    printer.file_logger.info(string)
@@ -2,7 +2,7 @@ import logging
 from datetime import datetime
 from typing import cast

-from tmtccmd.pus.service_1_verification import Service1TMExtended
+from tmtccmd.tm.pus_1_verification import Service1TMExtended
 from tmtccmd.logging import get_console_logger
 from tmtccmd.utility.tmtc_printer import FsfwTmTcPrinter
 from config.retvals import get_retval_dict
@@ -23,7 +23,7 @@ def handle_service_1_packet(printer: FsfwTmTcPrinter, raw_tm: bytes):
            )
        else:
            retval_string = (
-                f"Error Code information for code {srv1_packet.error_code}| "
+                f"Error Code information for code {srv1_packet.error_code} | "
                f"Name: {retval_info.name} | Info: {retval_info.info}"
            )
            LOGGER.info(retval_string)
@@ -1 +1 @@
-tmtccmd>=2.0.1
+tmtccmd>=2.1.0