1 |
Event ID (dec) |
Event ID (hex) |
Name |
Severity |
Description |
File Path |
203 |
12801 |
0x3201 |
NOT_ENOUGH_DEVICES_DUAL_MODE |
HIGH |
No description |
mission/system/acs/AcsBoardAssembly.h |
204 |
12802 |
0x3202 |
POWER_STATE_MACHINE_TIMEOUT |
MEDIUM |
No description |
mission/system/acs/AcsBoardAssembly.h |
205 |
12803 |
0x3203 |
SIDE_SWITCH_TRANSITION_NOT_ALLOWED |
LOW |
Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination |
mission/system/acs/AcsBoardAssembly.h |
206 |
12804 |
0x3204 |
DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY |
MEDIUM |
This is triggered when the assembly would have normally switched the board side, but the GPS device of the other side was marked faulty. P1: Current submode. |
mission/system/acs/AcsBoardAssembly.h |
207 |
12900 |
0x3264 |
TRANSITION_OTHER_SIDE_FAILED |
HIGH |
No description |
mission/system/acs/SusAssembly.h |
208 |
12901 |
0x3265 |
NOT_ENOUGH_DEVICES_DUAL_MODE |
HIGH |
No description |
mission/system/acs/SusAssembly.h |
209 |
12902 |
0x3266 |
POWER_STATE_MACHINE_TIMEOUT |
MEDIUM |
No description |
mission/system/acs/SusAssembly.h |