7 Commits

109 changed files with 282 additions and 366 deletions

View File

@ -4,10 +4,9 @@
# runner = "arm-none-eabi-gdb -q -x openocd.gdb"
# runner = "gdb-multiarch -q -x openocd.gdb"
# runner = "gdb -q -x openocd.gdb"
runner = "gdb-multiarch -q -x jlink.gdb"
# runner = "gdb-multiarch -q -x jlink.gdb"
# Probe-rs is currently problematic: https://github.com/probe-rs/probe-rs/issues/2567
# runner = "probe-rs run --chip VA108xx --chip-description-path ./scripts/VA108xx_Series.yaml"
runner = "probe-rs run --chip VA108xx_RAM --protocol jtag"
# runner = ["probe-rs", "run", "--chip", "$CHIP", "--log-format", "{L} {s}"]
rustflags = [

View File

@ -12,6 +12,8 @@ jobs:
targets: "thumbv6m-none-eabi"
- run: cargo check --target thumbv6m-none-eabi
- run: cargo check --target thumbv6m-none-eabi --examples
- run: cargo check -p va108xx --target thumbv6m-none-eabi --all-features
- run: cargo check -p va108xx-hal --target thumbv6m-none-eabi --features "defmt"
test:
name: Run Tests

View File

@ -60,14 +60,56 @@ You can then adapt the files in `.vscode` to your needs.
You can use CLI or VS Code for flashing, running and debugging. In any case, take
care of installing the pre-requisites first.
### Pre-Requisites
### Using CLI with probe-rs
Install [probe-rs](https://probe.rs/docs/getting-started/installation/) first.
You can use `probe-rs` to run the software and display RTT log output. However, debugging does not
work yet.
After installation, you can run the following command
```sh
probe-rs run --chip VA108xx_RAM --protocol jtag target/thumbv6m-none-eabi/debug/examples/blinky
```
to flash and run the blinky program on the RAM. There is also a `VA108xx` chip target
available for persistent flashing.
Runner configuration avilable in the `.cargo/def-config.toml` file to use `probe-rs` for
convenience.
### Using VS Code
Assuming a working debug connection to your VA108xx board, you can debug using VS Code with
the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug).
Please make sure that [`objdump-multiarch` and `nm-multiarch`](https://forums.raspberrypi.com/viewtopic.php?t=333146)
are installed as well.
Some sample configuration files for VS code were provided and can be used by running
`cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug`
to automatically rebuild and flash your application.
If you would like to use a custom GDB application, you can specify the gdb binary in the following
configuration variables in your `settings.json`:
- `"cortex-debug.gdbPath"`
- `"cortex-debug.gdbPath.linux"`
- `"cortex-debug.gdbPath.windows"`
- `"cortex-debug.gdbPath.osx"`
The provided VS Code configurations also provide an integrated RTT logger, which you can access
via the terminal at `RTT Ch:0 console`. In order for the RTT block address detection to
work properly, `objdump-multiarch` and `nm-multiarch` need to be installed.
### Using CLI with GDB and Segger J-Link Tools
Install the following two tools first:
1. [SEGGER J-Link tools](https://www.segger.com/downloads/jlink/) installed
2. [gdb-multiarch](https://packages.debian.org/sid/gdb-multiarch) or similar
cross-architecture debugger installed. All commands here assume `gdb-multiarch`.
### Using CLI
You can build the blinky example application with the following command
```sh
@ -101,25 +143,8 @@ runner = "gdb-multiarch -q -x jlink/jlink.gdb"
After that, you can simply use `cargo run --example blinky` to flash the blinky
example.
### Using VS Code
### Using the RTT Viewer
Assuming a working debug connection to your VA108xx board, you can debug using VS Code with
the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug).
Please make sure that [`objdump-multiarch` and `nm-multiarch`](https://forums.raspberrypi.com/viewtopic.php?t=333146)
are installed as well.
Some sample configuration files for VS code were provided and can be used by running
`cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug`
to automatically rebuild and flash your application.
If you would like to use a custom GDB application, you can specify the gdb binary in the following
configuration variables in your `settings.json`:
- `"cortex-debug.gdbPath"`
- `"cortex-debug.gdbPath.linux"`
- `"cortex-debug.gdbPath.windows"`
- `"cortex-debug.gdbPath.osx"`
The provided VS Code configurations also provide an integrated RTT logger, which you can access
via the terminal at `RTT Ch:0 console`. In order for the RTT block address detection to
work properly, `objdump-multiarch` and `nm-multiarch` need to be installed.
The Segger RTT viewer can be used to display log messages received from the target. The base
address for the RTT block placement is 0x10000000. It is recommended to use a search range of
0x1000 around that base address when using the RTT viewer.

View File

@ -122,14 +122,14 @@ fn main() -> ! {
}
TestCase::Pulse => {
let mut output_pulsed = pinsa.pa0.into_push_pull_output();
output_pulsed.pulse_mode(true, PinState::Low);
output_pulsed.configure_pulse_mode(true, PinState::Low);
rprintln!("Pulsing high 10 times..");
output_pulsed.set_low().unwrap();
for _ in 0..10 {
output_pulsed.set_high().unwrap();
cortex_m::asm::delay(25_000_000);
}
output_pulsed.pulse_mode(true, PinState::High);
output_pulsed.configure_pulse_mode(true, PinState::High);
rprintln!("Pulsing low 10 times..");
for _ in 0..10 {
output_pulsed.set_low().unwrap();
@ -137,15 +137,12 @@ fn main() -> ! {
}
}
TestCase::DelayGpio => {
let mut out_0 = pinsa
.pa0
.into_readable_push_pull_output()
.delay(true, false);
let mut out_1 = pinsa
.pa1
.into_readable_push_pull_output()
.delay(false, true);
let mut out_2 = pinsa.pa3.into_readable_push_pull_output().delay(true, true);
let mut out_0 = pinsa.pa0.into_readable_push_pull_output();
out_0.configure_delay(true, false);
let mut out_1 = pinsa.pa1.into_readable_push_pull_output();
out_1.configure_delay(false, true);
let mut out_2 = pinsa.pa3.into_readable_push_pull_output();
out_2.configure_delay(true, true);
for _ in 0..20 {
out_0.toggle().unwrap();
out_1.toggle().unwrap();

View File

@ -1,3 +1,3 @@
#!/bin/sh
#!/bin/bash
export RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options"
cargo +nightly doc --open

View File

@ -33,8 +33,7 @@
#![no_std]
#![cfg_attr(docsrs, feature(doc_auto_cfg))]
use core::cell::{Cell, RefCell};
use critical_section::CriticalSection;
use embassy_sync::blocking_mutex::CriticalSectionMutex as Mutex;
use critical_section::{CriticalSection, Mutex};
use portable_atomic::{AtomicU32, Ordering};
use embassy_time_driver::{time_driver_impl, Driver, TICK_HZ};
@ -46,7 +45,7 @@ use va108xx_hal::{
clock::enable_peripheral_clock,
enable_nvic_interrupt, pac,
prelude::*,
timer::{enable_tim_clk, get_tim_raw, TimRegInterface},
timer::{enable_tim_clk, get_tim_raw, TimRegInterface, ValidTim},
PeripheralSelect,
};
@ -116,12 +115,15 @@ pub mod embassy {
/// This has to be called once at initialization time to initiate the time driver for
/// embassy.
#[cfg(feature = "irqs-in-lib")]
pub unsafe fn init(
pub unsafe fn init<
TimekeeperTim: TimRegInterface + ValidTim,
AlarmTim: TimRegInterface + ValidTim,
>(
syscfg: &mut pac::Sysconfig,
irqsel: &pac::Irqsel,
sysclk: impl Into<Hertz>,
timekeeper_tim: impl TimRegInterface,
alarm_tim: impl TimRegInterface,
timekeeper_tim: TimekeeperTim,
alarm_tim: AlarmTim,
) {
TIME_DRIVER.init(
syscfg,
@ -140,12 +142,15 @@ pub mod embassy {
///
/// This has to be called once at initialization time to initiate the time driver for
/// embassy.
pub unsafe fn init_with_custom_irqs(
pub unsafe fn init_with_custom_irqs<
TimekeeperTim: TimRegInterface + ValidTim,
AlarmTim: TimRegInterface + ValidTim,
>(
syscfg: &mut pac::Sysconfig,
irqsel: &pac::Irqsel,
sysclk: impl Into<Hertz>,
timekeeper_tim: impl TimRegInterface,
alarm_tim: impl TimRegInterface,
timekeeper_tim: TimekeeperTim,
alarm_tim: AlarmTim,
timekeeper_irq: pac::Interrupt,
alarm_irq: pac::Interrupt,
) {
@ -188,21 +193,21 @@ pub struct TimerDriver {
impl TimerDriver {
#[allow(clippy::too_many_arguments)]
fn init(
fn init<TimekeeperTim: TimRegInterface + ValidTim, AlarmTim: TimRegInterface + ValidTim>(
&self,
syscfg: &mut pac::Sysconfig,
irqsel: &pac::Irqsel,
sysclk: impl Into<Hertz>,
timekeeper_tim: impl TimRegInterface,
alarm_tim: impl TimRegInterface,
timekeeper_tim: TimekeeperTim,
alarm_tim: AlarmTim,
timekeeper_irq: pac::Interrupt,
alarm_irq: pac::Interrupt,
) {
if ALARM_TIM.get().is_some() {
if ALARM_TIM.get().is_some() || TIMEKEEPER_TIM.get().is_some() {
return;
}
ALARM_TIM.set(alarm_tim.tim_id()).ok();
TIMEKEEPER_TIM.set(timekeeper_tim.tim_id()).ok();
ALARM_TIM.set(AlarmTim::TIM_ID).ok();
TIMEKEEPER_TIM.set(TimekeeperTim::TIM_ID).ok();
enable_peripheral_clock(syscfg, PeripheralSelect::Irqsel);
enable_tim_clk(syscfg, timekeeper_tim.tim_id());
let timekeeper_reg_block = timekeeper_tim.reg_block();

View File

@ -8,6 +8,16 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
## [unreleased]
## [v0.10.0]
## Added
- A lot of missing `defmt::Format` implementations.
## Changed
- Missing GPIO API replacements from `x` to `configure_x`
## [v0.9.0]
## Fixed

View File

@ -42,7 +42,7 @@ portable-atomic = "1"
[features]
default = ["rt"]
rt = ["va108xx/rt"]
defmt = ["dep:defmt", "fugit/defmt"]
defmt = ["dep:defmt", "fugit/defmt", "embedded-hal/defmt-03"]
[package.metadata.docs.rs]
all-features = true

View File

@ -115,7 +115,7 @@ impl InputPinFuture {
EDGE_DETECTION[pin_id_to_offset(pin.id())]
.store(false, core::sync::atomic::Ordering::Relaxed);
pin.interrupt_edge(
pin.configure_edge_interrupt(
edge,
InterruptConfig::new(irq, true, true),
Some(sys_cfg),

View File

@ -181,6 +181,7 @@ pub struct DynPinId {
/// This `struct` takes ownership of a [`DynPinId`] and provides an API to
/// access the corresponding regsiters.
#[derive(Debug)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub(crate) struct DynRegisters(DynPinId);
// [`DynRegisters`] takes ownership of the [`DynPinId`], and [`DynPin`]
@ -392,11 +393,15 @@ impl DynPin {
/// - Delay 2: 2
/// - Delay 1 + Delay 2: 3
#[inline]
pub fn delay(self, delay_1: bool, delay_2: bool) -> Result<Self, InvalidPinTypeError> {
pub fn configure_delay(
&mut self,
delay_1: bool,
delay_2: bool,
) -> Result<(), InvalidPinTypeError> {
match self.mode {
DynPinMode::Output(_) => {
self.regs.delay(delay_1, delay_2);
Ok(self)
self.regs.configure_delay(delay_1, delay_2);
Ok(())
}
_ => Err(InvalidPinTypeError(self.mode)),
}
@ -406,7 +411,7 @@ impl DynPin {
/// When configured for pulse mode, a given pin will set the non-default state for exactly
/// one clock cycle before returning to the configured default state
#[inline]
pub fn pulse_mode(
pub fn configure_pulse_mode(
&mut self,
enable: bool,
default_state: PinState,
@ -422,14 +427,14 @@ impl DynPin {
/// See p.37 and p.38 of the programmers guide for more information.
#[inline]
pub fn filter_type(
pub fn configure_filter_type(
&mut self,
filter: FilterType,
clksel: FilterClkSel,
) -> Result<(), InvalidPinTypeError> {
match self.mode {
DynPinMode::Input(_) => {
self.regs.filter_type(filter, clksel);
self.regs.configure_filter_type(filter, clksel);
Ok(())
}
_ => Err(InvalidPinTypeError(self.mode)),
@ -437,7 +442,7 @@ impl DynPin {
}
#[inline]
pub fn interrupt_edge(
pub fn configure_edge_interrupt(
&mut self,
edge_type: InterruptEdge,
irq_cfg: InterruptConfig,
@ -446,7 +451,7 @@ impl DynPin {
) -> Result<(), InvalidPinTypeError> {
match self.mode {
DynPinMode::Input(_) | DynPinMode::Output(_) => {
self.regs.interrupt_edge(edge_type);
self.regs.configure_edge_interrupt(edge_type);
self.irq_enb(irq_cfg, syscfg, irqsel);
Ok(())
}
@ -455,7 +460,7 @@ impl DynPin {
}
#[inline]
pub fn interrupt_level(
pub fn configure_level_interrupt(
&mut self,
level_type: InterruptLevel,
irq_cfg: InterruptConfig,
@ -464,7 +469,7 @@ impl DynPin {
) -> Result<(), InvalidPinTypeError> {
match self.mode {
DynPinMode::Input(_) | DynPinMode::Output(_) => {
self.regs.interrupt_level(level_type);
self.regs.configure_level_interrupt(level_type);
self.irq_enb(irq_cfg, syscfg, irqsel);
Ok(())
}

View File

@ -89,6 +89,7 @@ use paste::paste;
//==================================================================================================
#[derive(Debug, PartialEq, Eq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub enum InterruptEdge {
HighToLow,
LowToHigh,
@ -96,12 +97,14 @@ pub enum InterruptEdge {
}
#[derive(Debug, PartialEq, Eq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub enum InterruptLevel {
Low = 0,
High = 1,
}
#[derive(Debug, PartialEq, Eq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub enum PinState {
Low = 0,
High = 1,
@ -353,6 +356,7 @@ impl<I: PinId, M: PinMode> Pin<I, M> {
}
}
#[inline]
pub fn id(&self) -> DynPinId {
self.inner.id()
}
@ -482,11 +486,6 @@ impl<I: PinId, M: PinMode> Pin<I, M> {
self.inner.regs.write_pin(false)
}
#[inline]
pub(crate) fn _toggle_with_toggle_reg(&mut self) {
self.inner.regs.toggle();
}
#[inline]
pub(crate) fn _is_low(&self) -> bool {
!self.inner.regs.read_pin()
@ -599,7 +598,7 @@ impl<I: PinId, C: InputConfig> Pin<I, Input<C>> {
syscfg: Option<&mut Sysconfig>,
irqsel: Option<&mut Irqsel>,
) {
self.inner.regs.interrupt_edge(edge_type);
self.inner.regs.configure_edge_interrupt(edge_type);
self.irq_enb(irq_cfg, syscfg, irqsel);
}
@ -610,7 +609,7 @@ impl<I: PinId, C: InputConfig> Pin<I, Input<C>> {
syscfg: Option<&mut Sysconfig>,
irqsel: Option<&mut Irqsel>,
) {
self.inner.regs.interrupt_level(level_type);
self.inner.regs.configure_level_interrupt(level_type);
self.irq_enb(irq_cfg, syscfg, irqsel);
}
}
@ -622,23 +621,34 @@ impl<I: PinId, C: OutputConfig> Pin<I, Output<C>> {
/// - Delay 2: 2
/// - Delay 1 + Delay 2: 3
#[inline]
pub fn delay(self, delay_1: bool, delay_2: bool) -> Self {
self.inner.regs.delay(delay_1, delay_2);
self
pub fn configure_delay(&mut self, delay_1: bool, delay_2: bool) {
self.inner.regs.configure_delay(delay_1, delay_2);
}
#[inline]
pub fn toggle_with_toggle_reg(&mut self) {
self._toggle_with_toggle_reg()
self.inner.regs.toggle()
}
#[deprecated(
since = "0.9.0",
note = "Please use the `configure_pulse_mode` method instead"
)]
pub fn pulse_mode(&mut self, enable: bool, default_state: PinState) {
self.configure_pulse_mode(enable, default_state);
}
/// See p.52 of the programmers guide for more information.
/// When configured for pulse mode, a given pin will set the non-default state for exactly
/// one clock cycle before returning to the configured default state
pub fn pulse_mode(&mut self, enable: bool, default_state: PinState) {
pub fn configure_pulse_mode(&mut self, enable: bool, default_state: PinState) {
self.inner.regs.pulse_mode(enable, default_state);
}
#[deprecated(
since = "0.9.0",
note = "Please use the `configure_edge_interrupt` method instead"
)]
pub fn interrupt_edge(
&mut self,
edge_type: InterruptEdge,
@ -646,18 +656,43 @@ impl<I: PinId, C: OutputConfig> Pin<I, Output<C>> {
syscfg: Option<&mut Sysconfig>,
irqsel: Option<&mut Irqsel>,
) {
self.inner.regs.interrupt_edge(edge_type);
self.inner.regs.configure_edge_interrupt(edge_type);
self.irq_enb(irq_cfg, syscfg, irqsel);
}
pub fn interrupt_level(
pub fn configure_edge_interrupt(
&mut self,
edge_type: InterruptEdge,
irq_cfg: InterruptConfig,
syscfg: Option<&mut Sysconfig>,
irqsel: Option<&mut Irqsel>,
) {
self.inner.regs.configure_edge_interrupt(edge_type);
self.irq_enb(irq_cfg, syscfg, irqsel);
}
#[deprecated(
since = "0.9.0",
note = "Please use the `configure_level_interrupt` method instead"
)]
pub fn level_interrupt(
&mut self,
level_type: InterruptLevel,
irq_cfg: InterruptConfig,
syscfg: Option<&mut Sysconfig>,
irqsel: Option<&mut Irqsel>,
) {
self.inner.regs.interrupt_level(level_type);
self.configure_level_interrupt(level_type, irq_cfg, syscfg, irqsel);
}
pub fn configure_level_interrupt(
&mut self,
level_type: InterruptLevel,
irq_cfg: InterruptConfig,
syscfg: Option<&mut Sysconfig>,
irqsel: Option<&mut Irqsel>,
) {
self.inner.regs.configure_level_interrupt(level_type);
self.irq_enb(irq_cfg, syscfg, irqsel);
}
}
@ -666,7 +701,7 @@ impl<I: PinId, C: InputConfig> Pin<I, Input<C>> {
/// See p.37 and p.38 of the programmers guide for more information.
#[inline]
pub fn configure_filter_type(&mut self, filter: FilterType, clksel: FilterClkSel) {
self.inner.regs.filter_type(filter, clksel);
self.inner.regs.configure_filter_type(filter, clksel);
}
}

View File

@ -240,7 +240,7 @@ pub(super) unsafe trait RegisterInterface {
/// Only useful for interrupt pins. Configure whether to use edges or level as interrupt soure
/// When using edge mode, it is possible to generate interrupts on both edges as well
#[inline]
fn interrupt_edge(&mut self, edge_type: InterruptEdge) {
fn configure_edge_interrupt(&mut self, edge_type: InterruptEdge) {
unsafe {
self.port_reg()
.irq_sen()
@ -267,7 +267,7 @@ pub(super) unsafe trait RegisterInterface {
/// Configure which edge or level type triggers an interrupt
#[inline]
fn interrupt_level(&mut self, level: InterruptLevel) {
fn configure_level_interrupt(&mut self, level: InterruptLevel) {
unsafe {
self.port_reg()
.irq_sen()
@ -286,7 +286,7 @@ pub(super) unsafe trait RegisterInterface {
/// Only useful for input pins
#[inline]
fn filter_type(&mut self, filter: FilterType, clksel: FilterClkSel) {
fn configure_filter_type(&mut self, filter: FilterType, clksel: FilterClkSel) {
self.iocfg_port().modify(|_, w| {
// Safety: Only write to register for this Pin ID
unsafe {
@ -349,7 +349,7 @@ pub(super) unsafe trait RegisterInterface {
}
/// Only useful for output pins
fn delay(&self, delay_1: bool, delay_2: bool) {
fn configure_delay(&mut self, delay_1: bool, delay_2: bool) {
let portreg = self.port_reg();
unsafe {
if delay_1 {

View File

@ -36,8 +36,6 @@ pub struct InvalidTimingParamsError;
#[derive(Debug, PartialEq, Eq, thiserror::Error)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub enum Error {
//#[error("Invalid timing parameters")]
//InvalidTimingParams,
#[error("arbitration lost")]
ArbitrationLost,
#[error("nack address")]
@ -82,6 +80,7 @@ impl embedded_hal::i2c::Error for Error {
}
#[derive(Debug, PartialEq, Copy, Clone)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
enum I2cCmd {
Start = 0b00,
Stop = 0b10,
@ -252,6 +251,8 @@ impl Default for MasterConfig {
impl Sealed for MasterConfig {}
#[derive(Debug)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub struct SlaveConfig {
pub tx_fe_mode: FifoEmptyMode,
pub rx_fe_mode: FifoEmptyMode,
@ -455,13 +456,6 @@ impl<I2c: Instance> I2cBase<I2c> {
}
}
// Unique mode to use the loopback functionality
// pub struct I2cLoopback<I2C> {
// i2c_base: I2cBase<I2C>,
// master_cfg: MasterConfig,
// slave_cfg: SlaveConfig,
// }
//==================================================================================================
// I2C Master
//==================================================================================================
@ -673,275 +667,6 @@ impl<I2c: Instance, Addr> I2cMaster<I2c, Addr> {
}
}
/*
macro_rules! i2c_master {
($($I2CX:path: ($i2cx:ident, $clk_enb:path),)+) => {
$(
impl<ADDR> I2cMaster<$I2CX, ADDR> {
pub fn $i2cx(
i2c: $I2CX,
cfg: MasterConfig,
sys_clk: impl Into<Hertz> + Copy,
speed_mode: I2cSpeed,
sys_cfg: Option<&mut pac::Sysconfig>,
) -> Self {
I2cMaster {
i2c_base: I2cBase::$i2cx(
i2c,
sys_clk,
speed_mode,
Some(&cfg),
None,
sys_cfg
),
_addr: PhantomData,
}
.enable_master()
}
#[inline]
pub fn cancel_transfer(&self) {
self.i2c_base
.i2c
.cmd()
.write(|w| unsafe { w.bits(I2cCmd::Cancel as u32) });
}
#[inline]
pub fn clear_tx_fifo(&self) {
self.i2c_base.i2c.fifo_clr().write(|w| w.txfifo().set_bit());
}
#[inline]
pub fn clear_rx_fifo(&self) {
self.i2c_base.i2c.fifo_clr().write(|w| w.rxfifo().set_bit());
}
#[inline]
pub fn enable_master(self) -> Self {
self.i2c_base.i2c.ctrl().modify(|_, w| w.enable().set_bit());
self
}
#[inline]
pub fn disable_master(self) -> Self {
self.i2c_base.i2c.ctrl().modify(|_, w| w.enable().clear_bit());
self
}
#[inline(always)]
fn load_fifo(&self, word: u8) {
self.i2c_base
.i2c
.data()
.write(|w| unsafe { w.bits(word as u32) });
}
#[inline(always)]
fn read_fifo(&self) -> u8 {
self.i2c_base.i2c.data().read().bits() as u8
}
fn error_handler_write(&mut self, init_cmd: &I2cCmd) {
self.clear_tx_fifo();
if *init_cmd == I2cCmd::Start {
self.i2c_base.stop_cmd()
}
}
fn write_base(
&mut self,
addr: I2cAddress,
init_cmd: I2cCmd,
bytes: impl IntoIterator<Item = u8>,
) -> Result<(), Error> {
let mut iter = bytes.into_iter();
// Load address
let (addr, addr_mode_bit) = I2cBase::<$I2CX>::unwrap_addr(addr);
self.i2c_base.i2c.address().write(|w| unsafe {
w.bits(I2cDirection::Send as u32 | (addr << 1) as u32 | addr_mode_bit)
});
self.i2c_base
.i2c
.cmd()
.write(|w| unsafe { w.bits(init_cmd as u32) });
let mut load_if_next_available = || {
if let Some(next_byte) = iter.next() {
self.load_fifo(next_byte);
}
};
loop {
let status_reader = self.i2c_base.i2c.status().read();
if status_reader.arblost().bit_is_set() {
self.error_handler_write(&init_cmd);
return Err(Error::ArbitrationLost);
} else if status_reader.nackaddr().bit_is_set() {
self.error_handler_write(&init_cmd);
return Err(Error::NackAddr);
} else if status_reader.nackdata().bit_is_set() {
self.error_handler_write(&init_cmd);
return Err(Error::NackData);
} else if status_reader.idle().bit_is_set() {
return Ok(());
} else {
while !status_reader.txnfull().bit_is_set() {
load_if_next_available();
}
}
}
}
fn write_from_buffer(
&mut self,
init_cmd: I2cCmd,
addr: I2cAddress,
output: &[u8],
) -> Result<(), Error> {
let len = output.len();
// It should theoretically possible to transfer larger data sizes by tracking
// the number of sent words and setting it to 0x7fe as soon as only that many
// bytes are remaining. However, large transfer like this are not common. This
// feature will therefore not be supported for now.
if len > 0x7fe {
return Err(Error::DataTooLarge);
}
// Load number of words
self.i2c_base
.i2c
.words()
.write(|w| unsafe { w.bits(len as u32) });
let mut bytes = output.iter();
// FIFO has a depth of 16. We load slightly above the trigger level
// but not all of it because the transaction might fail immediately
const FILL_DEPTH: usize = 12;
// load the FIFO
for _ in 0..core::cmp::min(FILL_DEPTH, len) {
self.load_fifo(*bytes.next().unwrap());
}
self.write_base(addr, init_cmd, output.iter().cloned())
}
fn read_internal(&mut self, addr: I2cAddress, buffer: &mut [u8]) -> Result<(), Error> {
let len = buffer.len();
// It should theoretically possible to transfer larger data sizes by tracking
// the number of sent words and setting it to 0x7fe as soon as only that many
// bytes are remaining. However, large transfer like this are not common. This
// feature will therefore not be supported for now.
if len > 0x7fe {
return Err(Error::DataTooLarge);
}
// Clear the receive FIFO
self.clear_rx_fifo();
// Load number of words
self.i2c_base
.i2c
.words()
.write(|w| unsafe { w.bits(len as u32) });
let (addr, addr_mode_bit) = match addr {
I2cAddress::Regular(addr) => (addr as u16, 0 << 15),
I2cAddress::TenBit(addr) => (addr, 1 << 15),
};
// Load address
self.i2c_base.i2c.address().write(|w| unsafe {
w.bits(I2cDirection::Read as u32 | (addr << 1) as u32 | addr_mode_bit)
});
let mut buf_iter = buffer.iter_mut();
let mut read_bytes = 0;
// Start receive transfer
self.i2c_base
.i2c
.cmd()
.write(|w| unsafe { w.bits(I2cCmd::StartWithStop as u32) });
let mut read_if_next_available = || {
if let Some(next_byte) = buf_iter.next() {
*next_byte = self.read_fifo();
}
};
loop {
let status_reader = self.i2c_base.i2c.status().read();
if status_reader.arblost().bit_is_set() {
self.clear_rx_fifo();
return Err(Error::ArbitrationLost);
} else if status_reader.nackaddr().bit_is_set() {
self.clear_rx_fifo();
return Err(Error::NackAddr);
} else if status_reader.idle().bit_is_set() {
if read_bytes != len {
return Err(Error::InsufficientDataReceived);
}
return Ok(());
} else if status_reader.rxnempty().bit_is_set() {
read_if_next_available();
read_bytes += 1;
}
}
}
}
//======================================================================================
// Embedded HAL I2C implementations
//======================================================================================
impl embedded_hal::i2c::ErrorType for I2cMaster<$I2CX, SevenBitAddress> {
type Error = Error;
}
impl embedded_hal::i2c::I2c for I2cMaster<$I2CX, SevenBitAddress> {
fn transaction(
&mut self,
address: SevenBitAddress,
operations: &mut [Operation<'_>],
) -> Result<(), Self::Error> {
for operation in operations {
match operation {
Operation::Read(buf) => self.read_internal(I2cAddress::Regular(address), buf)?,
Operation::Write(buf) => self.write_from_buffer(
I2cCmd::StartWithStop,
I2cAddress::Regular(address),
buf,
)?,
}
}
Ok(())
}
}
impl embedded_hal::i2c::ErrorType for I2cMaster<$I2CX, TenBitAddress> {
type Error = Error;
}
impl embedded_hal::i2c::I2c<TenBitAddress> for I2cMaster<$I2CX, TenBitAddress> {
fn transaction(
&mut self,
address: TenBitAddress,
operations: &mut [Operation<'_>],
) -> Result<(), Self::Error> {
for operation in operations {
match operation {
Operation::Read(buf) => self.read_internal(I2cAddress::TenBit(address), buf)?,
Operation::Write(buf) => self.write_from_buffer(
I2cCmd::StartWithStop,
I2cAddress::TenBit(address),
buf,
)?,
}
}
Ok(())
}
}
)+
}
}
i2c_master!(
pac::I2ca: (i2ca, PeripheralClocks::I2c0),
pac::I2cb: (i2cb, PeripheralClocks::I2c1),
);
*/
//======================================================================================
// Embedded HAL I2C implementations
//======================================================================================

View File

@ -31,7 +31,7 @@ pub enum PortSel {
PortB,
}
#[derive(Copy, Clone, PartialEq, Eq)]
#[derive(Debug, Copy, Clone, PartialEq, Eq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub enum PeripheralSelect {
PortA = 0,
@ -54,6 +54,7 @@ pub enum PeripheralSelect {
/// Cortex-M0 NVIC. Both are generally necessary for IRQs to work, but the user might want to
/// perform those steps themselves.
#[derive(Debug, PartialEq, Eq, Clone, Copy)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub struct InterruptConfig {
/// Interrupt target vector. Should always be set, might be required for disabling IRQs
pub id: pac::Interrupt,

View File

@ -33,6 +33,7 @@ use embedded_hal::spi::{Mode, MODE_0};
const FILL_DEPTH: usize = 12;
pub const BMSTART_BMSTOP_MASK: u32 = 1 << 31;
pub const BMSKIPDATA_MASK: u32 = 1 << 30;
pub const DEFAULT_CLK_DIV: u16 = 2;
@ -288,6 +289,7 @@ pub trait TransferConfigProvider {
/// This struct contains all configuration parameter which are transfer specific
/// and might change for transfers to different SPI slaves
#[derive(Copy, Clone, Debug)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub struct TransferConfigWithHwcs<HwCs> {
pub hw_cs: Option<HwCs>,
pub cfg: TransferConfig,
@ -296,6 +298,7 @@ pub struct TransferConfigWithHwcs<HwCs> {
/// Type erased variant of the transfer configuration. This is required to avoid generics in
/// the SPI constructor.
#[derive(Copy, Clone, Debug)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub struct TransferConfig {
pub clk_cfg: Option<SpiClkConfig>,
pub mode: Option<Mode>,
@ -383,6 +386,8 @@ impl<HwCs: HwCsProvider> TransferConfigProvider for TransferConfigWithHwcs<HwCs>
}
/// Configuration options for the whole SPI bus. See Programmer Guide p.92 for more details
#[derive(Debug)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub struct SpiConfig {
clk: SpiClkConfig,
// SPI mode configuration
@ -532,6 +537,7 @@ pub struct Spi<SpiInstance, Pins, Word = u8> {
pins: Pins,
}
#[inline(always)]
pub fn mode_to_cpo_cph_bit(mode: embedded_hal::spi::Mode) -> (bool, bool) {
match mode {
embedded_hal::spi::MODE_0 => (false, false),
@ -575,6 +581,7 @@ impl SpiClkConfig {
}
#[derive(Debug, thiserror::Error)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
pub enum SpiClkConfigError {
#[error("division by zero")]
DivIsZero,

View File

@ -8,6 +8,10 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
## [unreleased]
## [v0.5.0] 2025-02-14
- Re-generated PAC with `svd2rust` v0.35.0 and added optional `defmt` and `Debug` implementations
## [v0.4.0] 2025-02-12
- Re-generated PAC with `svd2rust` v0.35.0

View File

@ -13,6 +13,7 @@ categories = ["embedded", "no-std", "hardware-support"]
[dependencies]
cortex-m = "0.7"
vcell = "0.1.3"
defmt = "0.3"
critical-section = { version = "1", optional = true }
[dependencies.cortex-m-rt]
@ -21,6 +22,10 @@ version = ">=0.6.15,<0.8"
[features]
rt = ["cortex-m-rt/device"]
# Adds defmt support
defmt = []
# Adds Debug implementation
debug = []
[package.metadata.docs.rs]
all-features = true

View File

@ -26,6 +26,12 @@ The `rt` feature is optional and recommended. It brings in support for `cortex-m
For full details on the autgenerated API, please see the
[svd2rust documentation](https://docs.rs/svd2rust/latest/svd2rust/#peripheral-api).
## Optional Features
- [`defmt`](https://defmt.ferrous-systems.com/): Add support for `defmt` by adding the
[`defmt::Format`](https://defmt.ferrous-systems.com/format) derive on many types.
- [`debug`]: Add `Debug` derives for various structures
## Regenerating the PAC
If you want to re-generate the PAC, for example if the register file `va416xx.svd` changes

View File

@ -30,7 +30,7 @@ fi
svdtools patch svd/va108xx-patch.yml
# See https://github.com/rust-embedded/svd2rust/issues/830 for required re-export.
${svd2rust_bin} --reexport-interrupt -i svd/va108xx.svd.patched
${svd2rust_bin} --reexport-interrupt --impl-defmt defmt --impl-debug-feature debug -i svd/va108xx.svd.patched
result=$?
if [ $result -ne 0 ]; then

View File

@ -2,6 +2,7 @@
pub type R = crate::R<AddressSpec>;
#[doc = "Register `ADDRESS` writer"]
pub type W = crate::W<AddressSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<ClktolimitSpec>;
#[doc = "Register `CLKTOLIMIT` writer"]
pub type W = crate::W<ClktolimitSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<CmdSpec>;
#[doc = "Register `CMD` writer"]
pub type W = crate::W<CmdSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<DataSpec>;
#[doc = "Register `DATA` writer"]
pub type W = crate::W<DataSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `RXCOUNT` reader"]
pub type R = crate::R<RxcountSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<RxfifoirqtrgSpec>;
#[doc = "Register `RXFIFOIRQTRG` writer"]
pub type W = crate::W<RxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0AddressSpec>;
#[doc = "Register `S0_ADDRESS` writer"]
pub type W = crate::W<S0AddressSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0AddressbSpec>;
#[doc = "Register `S0_ADDRESSB` writer"]
pub type W = crate::W<S0AddressbSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0AddressmaskSpec>;
#[doc = "Register `S0_ADDRESSMASK` writer"]
pub type W = crate::W<S0AddressmaskSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0AddressmaskbSpec>;
#[doc = "Register `S0_ADDRESSMASKB` writer"]
pub type W = crate::W<S0AddressmaskbSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0DataSpec>;
#[doc = "Register `S0_DATA` writer"]
pub type W = crate::W<S0DataSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `S0_LASTADDRESS` reader"]
pub type R = crate::R<S0LastaddressSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0MaxwordsSpec>;
#[doc = "Register `S0_MAXWORDS` writer"]
pub type W = crate::W<S0MaxwordsSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `S0_RXCOUNT` reader"]
pub type R = crate::R<S0RxcountSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0RxfifoirqtrgSpec>;
#[doc = "Register `S0_RXFIFOIRQTRG` writer"]
pub type W = crate::W<S0RxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `S0_STATE` reader"]
pub type R = crate::R<S0StateSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `S0_TXCOUNT` reader"]
pub type R = crate::R<S0TxcountSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<S0TxfifoirqtrgSpec>;
#[doc = "Register `S0_TXFIFOIRQTRG` writer"]
pub type W = crate::W<S0TxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `STATE` reader"]
pub type R = crate::R<StateSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<TmconfigSpec>;
#[doc = "Register `TMCONFIG` writer"]
pub type W = crate::W<TmconfigSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `TXCOUNT` reader"]
pub type R = crate::R<TxcountSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<TxfifoirqtrgSpec>;
#[doc = "Register `TXFIFOIRQTRG` writer"]
pub type W = crate::W<TxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<WordsSpec>;
#[doc = "Register `WORDS` writer"]
pub type W = crate::W<WordsSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -3,6 +3,7 @@ pub type R = crate::R<PortaSpec>;
#[doc = "Register `PORTA[%s]` writer"]
pub type W = crate::W<PortaSpec>;
#[doc = "Input Filter Selectoin\n\nValue on reset: 0"]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum Flttype {

View File

@ -2,6 +2,7 @@
pub type R = crate::R<IntRamSbeSpec>;
#[doc = "Register `INT_RAM_SBE` writer"]
pub type W = crate::W<IntRamSbeSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -97,6 +97,7 @@ pub static __INTERRUPTS: [Vector; 32] = [
Vector { _handler: OC31 },
];
#[doc = r"Enumeration of all the interrupts."]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
#[repr(u16)]
pub enum Interrupt {

View File

@ -1,5 +1,6 @@
#[doc = "Register `DATAIN` reader"]
pub type R = crate::R<DatainSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `DATAINBYTE[%s]` reader"]
pub type R = crate::R<DatainbyteSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<DatamaskSpec>;
#[doc = "Register `DATAMASK` writer"]
pub type W = crate::W<DatamaskSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<DatamaskbyteSpec>;
#[doc = "Register `DATAMASKBYTE[%s]` writer"]
pub type W = crate::W<DatamaskbyteSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `DATAOUT` writer"]
pub type W = crate::W<DataoutSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for crate::generic::Reg<DataoutSpec> {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
write!(f, "(not readable)")

View File

@ -1,5 +1,6 @@
#[doc = "Register `DATAOUTBYTE[%s]` writer"]
pub type W = crate::W<DataoutbyteSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for crate::generic::Reg<DataoutbyteSpec> {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
write!(f, "(not readable)")

View File

@ -2,6 +2,7 @@
pub type R = crate::R<EdgeStatusSpec>;
#[doc = "Register `EDGE_STATUS` writer"]
pub type W = crate::W<EdgeStatusSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<IrqEdgeSpec>;
#[doc = "Register `IRQ_EDGE` writer"]
pub type W = crate::W<IrqEdgeSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<IrqEnbSpec>;
#[doc = "Register `IRQ_ENB` writer"]
pub type W = crate::W<IrqEnbSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `IRQ_END` reader"]
pub type R = crate::R<IrqEndSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<IrqEvtSpec>;
#[doc = "Register `IRQ_EVT` writer"]
pub type W = crate::W<IrqEvtSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `IRQ_RAW` reader"]
pub type R = crate::R<IrqRawSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<IrqSenSpec>;
#[doc = "Register `IRQ_SEN` writer"]
pub type W = crate::W<IrqSenSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<ClkprescaleSpec>;
#[doc = "Register `CLKPRESCALE` writer"]
pub type W = crate::W<ClkprescaleSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<DataSpec>;
#[doc = "Register `DATA` writer"]
pub type W = crate::W<DataSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<RxfifoirqtrgSpec>;
#[doc = "Register `RXFIFOIRQTRG` writer"]
pub type W = crate::W<RxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `STATE` reader"]
pub type R = crate::R<StateSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<TxfifoirqtrgSpec>;
#[doc = "Register `TXFIFOIRQTRG` writer"]
pub type W = crate::W<TxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `EF_CONFIG` reader"]
pub type R = crate::R<EfConfigSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `EF_ID` reader"]
pub type R = crate::R<EfIdSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<IoconfigClkdivSpec>;
#[doc = "Register `IOCONFIG_CLKDIV%s` writer"]
pub type W = crate::W<IoconfigClkdivSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `IOCONFIG_CLKDIV0` reader"]
pub type R = crate::R<IoconfigClkdiv0Spec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PROCID` reader"]
pub type R = crate::R<ProcidSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<RamSbeSpec>;
#[doc = "Register `RAM_SBE` writer"]
pub type W = crate::W<RamSbeSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<RefreshConfigSpec>;
#[doc = "Register `REFRESH_CONFIG` writer"]
pub type W = crate::W<RefreshConfigSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `ROM_RETRIES` reader"]
pub type R = crate::R<RomRetriesSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<TimClkEnableSpec>;
#[doc = "Register `TIM_CLK_ENABLE` writer"]
pub type W = crate::W<TimClkEnableSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<TimResetSpec>;
#[doc = "Register `TIM_RESET` writer"]
pub type W = crate::W<TimResetSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<CntValueSpec>;
#[doc = "Register `CNT_VALUE` writer"]
pub type W = crate::W<CntValueSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -21,6 +21,7 @@ pub type IrqEnbR = crate::BitReader;
#[doc = "Field `IRQ_ENB` writer - Interrupt Enable"]
pub type IrqEnbW<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Counter Status Selection\n\nValue on reset: 0"]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum StatusSel {

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<PwmValueSpec>;
#[doc = "Register `PWM_VALUE` writer"]
pub type W = crate::W<PwmValueSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<PwmaValueSpec>;
#[doc = "Register `PWMA_VALUE` writer"]
pub type W = crate::W<PwmaValueSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<PwmbValueSpec>;
#[doc = "Register `PWMB_VALUE` writer"]
pub type W = crate::W<PwmbValueSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<RstValueSpec>;
#[doc = "Register `RST_VALUE` writer"]
pub type W = crate::W<RstValueSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<Addr9Spec>;
#[doc = "Register `ADDR9` writer"]
pub type W = crate::W<Addr9Spec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<Addr9maskSpec>;
#[doc = "Register `ADDR9MASK` writer"]
pub type W = crate::W<Addr9maskSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<DataSpec>;
#[doc = "Register `DATA` writer"]
pub type W = crate::W<DataSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<RxfifoirqtrgSpec>;
#[doc = "Register `RXFIFOIRQTRG` writer"]
pub type W = crate::W<RxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -2,6 +2,7 @@
pub type R = crate::R<RxfifortstrgSpec>;
#[doc = "Register `RXFIFORTSTRG` writer"]
pub type W = crate::W<RxfifortstrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `STATE` reader"]
pub type R = crate::R<StateSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `TXBREAK` writer"]
pub type W = crate::W<TxbreakSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for crate::generic::Reg<TxbreakSpec> {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
write!(f, "(not readable)")

View File

@ -2,6 +2,7 @@
pub type R = crate::R<TxfifoirqtrgSpec>;
#[doc = "Register `TXFIFOIRQTRG` writer"]
pub type W = crate::W<TxfifoirqtrgSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `PERID` reader"]
pub type R = crate::R<PeridSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `SYND_CHECK_32_52_DATA` reader"]
pub type R = crate::R<SyndCheck32_52DataSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `SYND_CHECK_32_52_SYND` reader"]
pub type R = crate::R<SyndCheck32_52SyndSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `SYND_CHECK_32_DATA` reader"]
pub type R = crate::R<SyndCheck32DataSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

View File

@ -1,5 +1,6 @@
#[doc = "Register `SYND_CHECK_32_SYND` reader"]
pub type R = crate::R<SyndCheck32SyndSpec>;
#[cfg(feature = "debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
write!(f, "{}", self.bits())

Some files were not shown because too many files have changed in this diff Show More