README correction

Reviewed-on: #12

.cargo/def-config.toml

@@ -24,8 +24,7 @@ rustflags = [
   # "-C", "link-arg=-Tdefmt.x",
 
   # Can be useful for debugging.
-  "-Clink-args=-Map=app.map"
-
+  # "-Clink-args=-Map=app.map"
 ]
 
 [build]

.github/workflows/ci.yml

@@ -39,7 +39,7 @@ jobs:
     steps:
       - uses: actions/checkout@v4
       - uses: dtolnay/rust-toolchain@nightly
-      - run: cargo +nightly doc --all-features --config 'build.rustdocflags=["--cfg", "docs_rs"]'
+      - run: RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options" cargo +nightly doc --all-features
 
   clippy:
     name: Clippy

README.md

@@ -106,3 +106,6 @@ configuration variables in your `settings.json`:
 - `"cortex-debug.gdbPath.linux"`
 - `"cortex-debug.gdbPath.windows"`
 - `"cortex-debug.gdbPath.osx"`
+
+The provided VS Code configurations also provide an integrated RTT logger, which you can access
+via the terminal at `RTT Ch:0 console`.

automation/Jenkinsfile

@@ -25,7 +25,7 @@ pipeline {
         stage('Docs') {
           steps {
             sh """
-              cargo +nightly doc --all-features --config 'build.rustdocflags=["--cfg", "docs_rs"]'
+              RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options" cargo +nightly doc --all-features
             """
           }
         }

board-tests/Cargo.toml

@@ -15,7 +15,7 @@ embedded-hal-nb = "1"
 embedded-io = "0.6"
 
 [dependencies.va108xx-hal]
-version = "0.6"
+version = "0.7"
 path = "../va108xx-hal"
 features = ["rt"]
 

examples/simple/Cargo.toml

@@ -28,10 +28,6 @@ version = "1"
 features = ["cortex-m-systick"]
 
 [dependencies.va108xx-hal]
-version = "0.6"
+version = "0.7"
 path = "../../va108xx-hal"
 features = ["rt", "defmt"]
-
-[dependencies.va108xx]
-version = "0.3"
-path = "../../va108xx"

examples/simple/examples/blinky-pac.rs

@@ -8,7 +8,7 @@
 
 use cortex_m_rt::entry;
 use panic_halt as _;
-use va108xx as pac;
+use va108xx_hal::pac;
 
 // REB LED pin definitions. All on port A
 const LED_D2: u32 = 1 << 10;

examples/simple/examples/cascade.rs

@@ -39,7 +39,7 @@ fn main() -> ! {
         CountDownTimer::new(&mut dp.sysconfig, 50.MHz(), dp.tim3).auto_disable(true);
     cascade_triggerer.listen(
         Event::TimeOut,
-        IrqCfg::new(va108xx::Interrupt::OC1, true, false),
+        IrqCfg::new(pac::Interrupt::OC1, true, false),
         Some(&mut dp.irqsel),
         Some(&mut dp.sysconfig),
     );
@@ -62,7 +62,7 @@ fn main() -> ! {
     // the timer expires
     cascade_target_1.listen(
         Event::TimeOut,
-        IrqCfg::new(va108xx::Interrupt::OC2, true, false),
+        IrqCfg::new(pac::Interrupt::OC2, true, false),
         Some(&mut dp.irqsel),
         Some(&mut dp.sysconfig),
     );
@@ -88,7 +88,7 @@ fn main() -> ! {
     // the timer expires
     cascade_target_2.listen(
         Event::TimeOut,
-        IrqCfg::new(va108xx::Interrupt::OC3, true, false),
+        IrqCfg::new(pac::Interrupt::OC3, true, false),
         Some(&mut dp.irqsel),
         Some(&mut dp.sysconfig),
     );

examples/simple/examples/pwm.rs

@@ -21,9 +21,9 @@ fn main() -> ! {
     let mut dp = pac::Peripherals::take().unwrap();
     let pinsa = PinsA::new(&mut dp.sysconfig, None, dp.porta);
     let mut pwm = pwm::PwmPin::new(
-        (pinsa.pa3.into_funsel_1(), dp.tim3),
-        50.MHz(),
         &mut dp.sysconfig,
+        50.MHz(),
+        (pinsa.pa3.into_funsel_1(), dp.tim3),
         10.Hz(),
     );
     let mut delay = set_up_ms_delay_provider(&mut dp.sysconfig, 50.MHz(), dp.tim0);

examples/simple/examples/rtt-log.rs

@@ -3,13 +3,14 @@
 #![no_std]
 
 use cortex_m_rt::entry;
-use panic_halt as _;
+use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va108xx as _;
+use va108xx_hal as _;
 
 #[entry]
 fn main() -> ! {
     rtt_init_print!();
+    rprintln!("-- VA108XX RTT example --");
     let mut counter = 0;
     loop {
         rprintln!("{}: Hello, world!", counter);

examples/simple/examples/spi.rs

@@ -73,12 +73,12 @@ fn main() -> ! {
                 pinsa.pa30.into_funsel_1(),
                 pinsa.pa29.into_funsel_1(),
             );
-            let mut spia = Spi::spia(
+            let mut spia = Spi::new(
+                &mut dp.sysconfig,
+                50.MHz(),
                 dp.spia,
                 (sck, miso, mosi),
-                50.MHz(),
                 spi_cfg,
-                Some(&mut dp.sysconfig),
                 None,
             );
             spia.set_fill_word(FILL_WORD);
@@ -90,12 +90,12 @@ fn main() -> ! {
                 pinsb.pb8.into_funsel_2(),
                 pinsb.pb7.into_funsel_2(),
             );
-            let mut spia = Spi::spia(
+            let mut spia = Spi::new(
+                &mut dp.sysconfig,
+                50.MHz(),
                 dp.spia,
                 (sck, miso, mosi),
-                50.MHz(),
                 spi_cfg,
-                Some(&mut dp.sysconfig),
                 None,
             );
             spia.set_fill_word(FILL_WORD);
@@ -107,12 +107,12 @@ fn main() -> ! {
                 pinsb.pb4.into_funsel_1(),
                 pinsb.pb3.into_funsel_1(),
             );
-            let mut spib = Spi::spib(
+            let mut spib = Spi::new(
+                &mut dp.sysconfig,
+                50.MHz(),
                 dp.spib,
                 (sck, miso, mosi),
-                50.MHz(),
                 spi_cfg,
-                Some(&mut dp.sysconfig),
                 None,
             );
             spib.set_fill_word(FILL_WORD);
@@ -195,6 +195,10 @@ fn main() -> ! {
                     if EXAMPLE_SEL == ExampleSelect::Loopback {
                         // Can't really verify correct reply here.
                         spi.write(&[0x42]).expect("write failed");
+                        // Need small delay.. otherwise we will read back the sent byte (which we don't want here).
+                        // The write function will return as soon as all bytes were shifted out, ignoring the
+                        // reply bytes.
+                        delay.delay_us(50);
                         // Because of the loopback mode, we should get back the fill word here.
                         spi.read(&mut reply_buf[0..1]).unwrap();
                         assert_eq!(reply_buf[0], FILL_WORD);

examples/simple/examples/uart-irq-rtic.rs

@@ -65,7 +65,7 @@ mod app {
 
         let irq_cfg = IrqCfg::new(pac::interrupt::OC3, true, true);
         let (mut irq_uart, _) =
-            uart::Uart::uartb(dp.uartb, (tx, rx), 115200.Hz(), &mut dp.sysconfig, 50.MHz())
+            uart::Uart::new(&mut dp.sysconfig, 50.MHz(), dp.uartb, (tx, rx), 115200.Hz())
                 .into_uart_with_irq(irq_cfg, Some(&mut dp.sysconfig), Some(&mut dp.irqsel))
                 .downgrade();
         irq_uart

examples/simple/examples/uart.rs

@@ -28,7 +28,7 @@ fn main() -> ! {
     let tx = gpioa.pa9.into_funsel_2();
     let rx = gpioa.pa8.into_funsel_2();
 
-    let uarta = uart::Uart::uarta(dp.uarta, (tx, rx), 115200.Hz(), &mut dp.sysconfig, 50.MHz());
+    let uarta = uart::Uart::new(&mut dp.sysconfig, 50.MHz(), dp.uarta, (tx, rx), 115200.Hz());
     let (mut tx, mut rx) = uarta.split();
     writeln!(tx, "Hello World\r").unwrap();
     loop {

va108xx-hal/CHANGELOG.md

@@ -6,6 +6,15 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](http://keepachangelog.com/)
 and this project adheres to [Semantic Versioning](http://semver.org/).
 
+## [v0.7.0] 2024-07-04
+
+- Replace `uarta` and `uartb` `Uart` constructors by `new` constructor
+- Replace SPI `spia`, `spib` and `spic` constructors by `new` constructor
+- Replace I2C `i2ca`, `i2cb` constructors by `new` constructor. Update constructor
+  to fail on invalid fast I2C speed system clock values
+- Renamed `gpio::pins` to `gpio::pin` and `gpio::dynpins` to `gpio::dynpin`
+- Simplify UART clock divider calculations and remove `libm` dependency consequently
+
 ## [v0.6.0] 2024-06-16
 
 - Updated `embedded-hal` to v1

va108xx-hal/Cargo.toml

@@ -1,11 +1,11 @@
 [package]
 name = "va108xx-hal"
-version = "0.6.0"
+version = "0.7.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "HAL for the Vorago VA108xx family of microcontrollers"
-homepage = "https://egit.irs.uni-stuttgart.de/rust/va108xx-hal"
-repository = "https://egit.irs.uni-stuttgart.de/rust/va108xx-hal"
+homepage = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
+repository = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
 license = "Apache-2.0"
 keywords = ["no-std", "hal", "cortex-m", "vorago", "va108xx"]
 categories = ["aerospace", "embedded", "no-std", "hardware-support"]
@@ -16,7 +16,6 @@ cortex-m-rt = "0.7"
 nb = "1"
 paste = "1"
 embedded-hal-nb = "1"
-libm = "0.2"
 embedded-io = "0.6"
 fugit = "0.3"
 typenum = "1"
@@ -24,8 +23,7 @@ defmt = { version = "0.3", optional = true }
 delegate = "0.12"
 
 [dependencies.va108xx]
-version = "0.3.0"
-path = "../va108xx"
+version = "0.3"
 default-features = false
 features = ["critical-section"]
 
@@ -46,4 +44,4 @@ rt = ["va108xx/rt"]
 
 [package.metadata.docs.rs]
 all-features = true
-rustdoc-args = ["--cfg", "docs_rs", "--generate-link-to-definition"]
+rustdoc-args = ["--generate-link-to-definition"]

va108xx-hal/README.md

@@ -4,7 +4,7 @@
 # HAL for the Vorago VA108xx MCU family
 
 This repository contains the **H**ardware **A**bstraction **L**ayer (HAL), which is an additional
-hardware abstraction on top of the [peripheral access API](https://egit.irs.uni-stuttgart.de/rust/va108xx).
+hardware abstraction on top of the [peripheral access API](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/va108xx).
 
 It is the result of reading the datasheet for the device and encoding a type-safe layer over the
 raw PAC. This crate also implements traits specified by the
@@ -39,7 +39,7 @@ your custom board.
 
 The hello world of embedded development is usually to blinky a LED. This example
 is contained within the
-[examples folder](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal/src/branch/main/examples/blinky.rs).
+[examples folder](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/simple/examples/blinky.rs).
 
 1. Set up your Rust cross-compiler if you have not done so yet. See more in the [build chapter](#Building)
 2. Create a new binary crate with `cargo init`

va108xx-hal/src/gpio/dynpin.rs

@@ -36,8 +36,7 @@
 //! Users may try to convert value-level pins back to their type-level
 //! equivalents. However, this option is fallible, because the compiler cannot
 //! guarantee the pin has the correct ID or is in the correct mode at
-//! compile-time. Use [`TryFrom`](core::convert::TryFrom)/
-//! [`TryInto`](core::convert::TryInto) for this conversion.
+//! compile-time. Use [TryFrom]/[TryInto] for this conversion.
 //!
 //! ```
 //! // Convert to a `DynPin`
@@ -55,10 +54,10 @@
 //! `Error = core::convert::Infallible`, the value-level API can return a real
 //! error. If the [`DynPin`] is not in the correct [`DynPinMode`] for the
 //! operation, the trait functions will return
-//! [`InvalidPinType`](PinError::InvalidPinType).
+//! [InvalidPinTypeError].
 
 use super::{
-    pins::{FilterType, InterruptEdge, InterruptLevel, Pin, PinId, PinMode, PinState},
+    pin::{FilterType, InterruptEdge, InterruptLevel, Pin, PinId, PinMode, PinState},
     reg::RegisterInterface,
 };
 use crate::{clock::FilterClkSel, pac, FunSel, IrqCfg};

va108xx-hal/src/gpio/mod.rs

@@ -3,10 +3,10 @@
 //! The implementation of this GPIO module is heavily based on the
 //! [ATSAMD HAL implementation](https://docs.rs/atsamd-hal/latest/atsamd_hal/gpio/index.html).
 //!
-//! This API provides two different submodules, [`mod@pins`] and [`dynpins`],
-//! representing two different ways to handle GPIO pins. The default, [`mod@pins`],
+//! This API provides two different submodules, [pin] and [dynpin],
+//! representing two different ways to handle GPIO pins. The default, [pin],
 //! is a type-level API that tracks the state of each pin at compile-time. The
-//! alternative, [`dynpins`] is a type-erased, value-level API that tracks the
+//! alternative, [dynpin] is a type-erased, value-level API that tracks the
 //! state of each pin at run-time.
 //!
 //! The type-level API is strongly preferred. By representing the state of each
@@ -14,14 +14,13 @@
 //! compile-time. Furthermore, the type-level API has absolutely zero run-time
 //! cost.
 //!
-//! If needed, [`dynpins`] can be used to erase the type-level differences
+//! If needed, [dynpin] can be used to erase the type-level differences
 //! between pins. However, by doing so, pins must now be tracked at run-time,
 //! and each pin has a non-zero memory footprint.
 //!
 //! ## Examples
 //!
-//! - [Blinky example](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal/src/branch/main/examples/blinky.rs)
-//!
+//! - [Blinky example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/simple/examples/blinky.rs)
 
 #[derive(Debug, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
@@ -102,10 +101,10 @@ macro_rules! common_reg_if_functions {
     };
 }
 
-pub mod dynpins;
-pub use dynpins::*;
+pub mod dynpin;
+pub use dynpin::*;
 
-pub mod pins;
-pub use pins::*;
+pub mod pin;
+pub use pin::*;
 
 mod reg;

va108xx-hal/src/gpio/pin.rs

@@ -29,73 +29,48 @@
 //! }
 //! ```
 //!
-//! A `PinId` identifies a pin by it's group (A, B, C or D) and pin number. Each
-//! `PinId` instance is named according to its datasheet identifier, e.g.
-//! [`PA02`].
+//! A [PinId] identifies a pin by it's group (A or B) and pin number. Each
+//! [PinId] instance is named according to its datasheet identifier, e.g.
+//! [PA2].
 //!
-//! A `PinMode` represents the various pin modes. The available `PinMode`
-//! variants are [`Disabled`], [`Input`], [`Interrupt`], [`Output`] and
-//! [`Alternate`], each with its own corresponding configurations.
+//! A [PinMode] represents the various pin modes. The available [PinMode]
+//! variants are [`Input`], [`Output`] and [`Alternate`], each with its own
+//! corresponding configurations.
 //!
 //! It is not possible for users to create new instances of a [`Pin`]. Singleton
-//! instances of each pin are made available to users through the [`Pins`]
+//! instances of each pin are made available to users through the PinsX
 //! struct.
 //!
-//! To create the [`Pins`] struct, users must supply the PAC
-//! [`PORT`](crate::pac::PORT) peripheral. The [`Pins`] struct takes
-//! ownership of the [`PORT`] and provides the corresponding pins. Each [`Pin`]
-//! within the [`Pins`] struct can be moved out and used individually.
+//! Example for the pins of PORT A:
+//!
+//! To create the [PinsA] struct, users must supply the PAC
+//! [Port](crate::pac::Porta) peripheral. The [PinsA] struct takes
+//! ownership of the [Porta] and provides the corresponding pins. Each [`Pin`]
+//! within the [PinsA] struct can be moved out and used individually.
 //!
 //!
 //! ```
 //! let mut peripherals = Peripherals::take().unwrap();
-//! let pins = Pins::new(peripherals.PORT);
+//! let pinsa = PinsA::new(peripherals.PORT);
 //! ```
 //!
 //! Pins can be converted between modes using several different methods.
 //!
-//! ```
+//! ```no_run
 //! // Use one of the literal function names
-//! let pa27 = pins.pa27.into_floating_input();
+//! let pa0 = pinsa.pa0.into_floating_input();
 //! // Use a generic method and one of the `PinMode` variant types
-//! let pa27 = pins.pa27.into_mode::<FloatingInput>();
+//! let pa0 = pinsa.pa0.into_mode::<FloatingInput>();
 //! // Specify the target type and use `From`/`Into`
-//! let pa27: Pin<PA27, FloatingInput> = pins.pa27.into();
+//! let pa0: Pin<PA0, FloatingInput> = pinsa.pa27.into();
 //! ```
 //!
 //! # Embedded HAL traits
 //!
 //! This module implements all of the embedded HAL GPIO traits for each [`Pin`]
 //! in the corresponding [`PinMode`]s, namely: [`InputPin`], [`OutputPin`],
-//! [`ToggleableOutputPin`] and [`StatefulOutputPin`].
-//!
-//! For example, you can control the logic level of an `OutputPin` like so
-//!
-//! ```
-//! use atsamd_hal::pac::Peripherals;
-//! use atsamd_hal::gpio::Pins;
-//! use crate::ehal_02::digital::v2::OutputPin;
-//!
-//! let mut peripherals = Peripherals::take().unwrap();
-//! let mut pins = Pins::new(peripherals.PORT);
-//! pins.pa27.set_high();
-//! ```
-//!
-//! # Type-level features
-//!
-//! This module also provides additional, type-level tools to work with GPIO
-//! pins.
-//!
-//! The [`OptionalPinId`] and [`OptionalPin`] traits use the [`OptionalKind`]
-//! pattern to act as type-level versions of [`Option`] for `PinId` and `Pin`
-//! respectively. And the [`AnyPin`] trait defines an [`AnyKind`] type class
-//! for all `Pin` types.
-//!
-//! [type classes]: crate::typelevel#type-classes
-//! [type-level enum]: crate::typelevel#type-level-enum
-//! [`OptionalKind`]: crate::typelevel#optionalkind-trait-pattern
-//! [`AnyKind`]: crate::typelevel#anykind-trait-pattern
-use super::dynpins::{DynAlternate, DynGroup, DynInput, DynOutput, DynPinId, DynPinMode};
+//! and [`StatefulOutputPin`].
+use super::dynpin::{DynAlternate, DynGroup, DynInput, DynOutput, DynPinId, DynPinMode};
 use super::reg::RegisterInterface;
 use crate::{
     pac::{Irqsel, Porta, Portb, Sysconfig},
@@ -137,9 +112,9 @@ pub enum PinState {
 
 /// Type-level enum for input configurations
 ///
-/// The valid options are [`Floating`], [`PullDown`] and [`PullUp`].
+/// The valid options are [Floating], [PullDown] and [PullUp].
 pub trait InputConfig: Sealed {
-    /// Corresponding [`DynInput`](super::DynInput)
+    /// Corresponding [DynInput]
     const DYN: DynInput;
 }
 
@@ -297,9 +272,9 @@ pub type Reset = InputFloating;
 
 /// Type-level enum representing pin modes
 ///
-/// The valid options are [`Input`], [`Output`] and [`Alternate`].
+/// The valid options are [Input], [Output] and [Alternate].
 pub trait PinMode: Sealed {
-    /// Corresponding [`DynPinMode`](super::DynPinMode)
+    /// Corresponding [DynPinMode]
     const DYN: DynPinMode;
 }
 
@@ -319,7 +294,7 @@ impl<C: AlternateConfig> PinMode for Alternate<C> {
 
 /// Type-level enum for pin IDs
 pub trait PinId: Sealed {
-    /// Corresponding [`DynPinId`](super::DynPinId)
+    /// Corresponding [DynPinId]
     const DYN: DynPinId;
 }
 
@@ -344,7 +319,7 @@ macro_rules! pin_id {
 //  Pin
 //==================================================================================================
 
-/// A type-level GPIO pin, parameterized by [`PinId`] and [`PinMode`] types
+/// A type-level GPIO pin, parameterized by [PinId] and [PinMode] types
 
 pub struct Pin<I: PinId, M: PinMode> {
     pub(in crate::gpio) regs: Registers<I>,
@@ -352,12 +327,12 @@ pub struct Pin<I: PinId, M: PinMode> {
 }
 
 impl<I: PinId, M: PinMode> Pin<I, M> {
-    /// Create a new [`Pin`]
+    /// Create a new [Pin]
     ///
     /// # Safety
     ///
-    /// Each [`Pin`] must be a singleton. For a given [`PinId`], there must be
-    /// at most one corresponding [`Pin`] in existence at any given time.
+    /// Each [Pin] must be a singleton. For a given [PinId], there must be
+    /// at most one corresponding [Pin] in existence at any given time.
     /// Violating this requirement is `unsafe`.
     #[inline]
     pub(crate) unsafe fn new() -> Pin<I, M> {

va108xx-hal/src/gpio/reg.rs

@@ -1,5 +1,5 @@
-use super::dynpins::{self, DynGroup, DynPinId, DynPinMode};
-use super::pins::{FilterType, InterruptEdge, InterruptLevel, PinState};
+use super::dynpin::{self, DynGroup, DynPinId, DynPinMode};
+use super::pin::{FilterType, InterruptEdge, InterruptLevel, PinState};
 use super::IsMaskedError;
 use crate::clock::FilterClkSel;
 use va108xx::{ioconfig, porta};
@@ -30,7 +30,7 @@ impl From<DynPinMode> for ModeFields {
         use DynPinMode::*;
         match mode {
             Input(config) => {
-                use dynpins::DynInput::*;
+                use dynpin::DynInput::*;
                 fields.dir = false;
                 match config {
                     Floating => (),
@@ -44,7 +44,7 @@ impl From<DynPinMode> for ModeFields {
                 }
             }
             Output(config) => {
-                use dynpins::DynOutput::*;
+                use dynpin::DynOutput::*;
                 fields.dir = true;
                 match config {
                     PushPull => (),

va108xx-hal/src/lib.rs

@@ -1,5 +1,5 @@
 #![no_std]
-#![cfg_attr(docs_rs, feature(doc_auto_cfg))]
+#![cfg_attr(docsrs, feature(doc_auto_cfg))]
 
 pub use va108xx;
 pub use va108xx as pac;

va108xx-hal/src/prelude.rs

@@ -1,3 +1,5 @@
 //! Prelude
 pub use fugit::ExtU32 as _;
 pub use fugit::RateExtU32 as _;
+
+pub use crate::time::*;

va108xx-hal/src/pwm.rs

@@ -4,7 +4,7 @@
 //!
 //! ## Examples
 //!
-//! - [PWM example](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal/src/branch/main/examples/pwm.rs)
+//! - [PWM example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/simple/examples/pwm.rs)
 use core::convert::Infallible;
 use core::marker::PhantomData;
 
@@ -158,9 +158,9 @@ where
 {
     /// Create a new stronlgy typed PWM pin
     pub fn new(
-        vtp: (Pin, Tim),
-        sys_clk: impl Into<Hertz> + Copy,
         sys_cfg: &mut pac::Sysconfig,
+        sys_clk: impl Into<Hertz> + Copy,
+        tim_and_pin: (Pin, Tim),
         initial_period: impl Into<Hertz> + Copy,
     ) -> Self {
         let mut pin = PwmPin {
@@ -171,7 +171,7 @@ where
                 current_rst_val: 0,
                 sys_clk: sys_clk.into(),
             },
-            reg: unsafe { TimAndPinRegister::new(vtp.0, vtp.1) },
+            reg: unsafe { TimAndPinRegister::new(tim_and_pin.0, tim_and_pin.1) },
             mode: PhantomData,
         };
         enable_peripheral_clock(sys_cfg, crate::clock::PeripheralClocks::Gpio);
@@ -225,12 +225,13 @@ where
     (Pin, Tim): ValidTimAndPin<Pin, Tim>,
 {
     pub fn pwma(
-        vtp: (Pin, Tim),
-        sys_clk: impl Into<Hertz> + Copy,
         sys_cfg: &mut pac::Sysconfig,
+        sys_clk: impl Into<Hertz> + Copy,
+        pin_and_tim: (Pin, Tim),
         initial_period: impl Into<Hertz> + Copy,
     ) -> Self {
-        let mut pin: PwmPin<Pin, Tim, PwmA> = Self::new(vtp, sys_clk, sys_cfg, initial_period);
+        let mut pin: PwmPin<Pin, Tim, PwmA> =
+            Self::new(sys_cfg, sys_clk, pin_and_tim, initial_period);
         pin.enable_pwm_a();
         pin
     }
@@ -241,12 +242,13 @@ where
     (Pin, Tim): ValidTimAndPin<Pin, Tim>,
 {
     pub fn pwmb(
-        vtp: (Pin, Tim),
-        sys_clk: impl Into<Hertz> + Copy,
         sys_cfg: &mut pac::Sysconfig,
+        sys_clk: impl Into<Hertz> + Copy,
+        pin_and_tim: (Pin, Tim),
         initial_period: impl Into<Hertz> + Copy,
     ) -> Self {
-        let mut pin: PwmPin<Pin, Tim, PwmB> = Self::new(vtp, sys_clk, sys_cfg, initial_period);
+        let mut pin: PwmPin<Pin, Tim, PwmB> =
+            Self::new(sys_cfg, sys_clk, pin_and_tim, initial_period);
         pin.enable_pwm_b();
         pin
     }

va108xx-hal/src/sysconfig.rs

@@ -1,18 +1,19 @@
 use crate::{pac, PeripheralSelect};
 
 #[derive(PartialEq, Eq, Debug)]
-pub struct InvalidounterResetVal(pub(crate) ());
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub struct InvalidCounterResetVal(pub(crate) ());
 
 /// Enable scrubbing for the ROM
 ///
-/// Returns [`UtilityError::InvalidCounterResetVal`] if the scrub rate is 0
+/// Returns [InvalidCounterResetVal] if the scrub rate is 0
 /// (equivalent to disabling) or larger than 24 bits
 pub fn enable_rom_scrubbing(
     syscfg: &mut pac::Sysconfig,
     scrub_rate: u32,
-) -> Result<(), InvalidounterResetVal> {
+) -> Result<(), InvalidCounterResetVal> {
     if scrub_rate == 0 || scrub_rate > u32::pow(2, 24) {
-        return Err(InvalidounterResetVal(()));
+        return Err(InvalidCounterResetVal(()));
     }
     syscfg.rom_scrub().write(|w| unsafe { w.bits(scrub_rate) });
     Ok(())
@@ -24,14 +25,14 @@ pub fn disable_rom_scrubbing(syscfg: &mut pac::Sysconfig) {
 
 /// Enable scrubbing for the RAM
 ///
-/// Returns [`UtilityError::InvalidCounterResetVal`] if the scrub rate is 0
+/// Returns [InvalidCounterResetVal] if the scrub rate is 0
 /// (equivalent to disabling) or larger than 24 bits
 pub fn enable_ram_scrubbing(
     syscfg: &mut pac::Sysconfig,
     scrub_rate: u32,
-) -> Result<(), InvalidounterResetVal> {
+) -> Result<(), InvalidCounterResetVal> {
     if scrub_rate == 0 || scrub_rate > u32::pow(2, 24) {
-        return Err(InvalidounterResetVal(()));
+        return Err(InvalidCounterResetVal(()));
     }
     syscfg.ram_scrub().write(|w| unsafe { w.bits(scrub_rate) });
     Ok(())

va108xx-hal/src/timer.rs

@@ -2,7 +2,7 @@
 //!
 //! ## Examples
 //!
-//! - [MS and second tick implementation](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal/src/branch/main/examples/timer-ticks.rs)
+//! - [MS and second tick implementation](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/simple/examples/timer-ticks.rs)
 //! - [Cascade feature example](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal/src/branch/main/examples/cascade.rs)
 pub use crate::IrqCfg;
 use crate::{

va108xx-hal/src/uart.rs

@@ -2,23 +2,23 @@
 //!
 //! ## Examples
 //!
-//! - [UART simple example](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal/src/branch/main/examples/uart.rs)
-//! - [UART with IRQ and RTIC](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal/src/branch/main/examples/uart-irq-rtic.rs)
+//! - [UART simple example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/simple/examples/uart.rs)
+//! - [UART with IRQ and RTIC](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/simple/examples/uart-irq-rtic.rs)
 use core::{marker::PhantomData, ops::Deref};
 use embedded_hal_nb::serial::Read;
 use fugit::RateExtU32;
-use libm::floorf;
 
 pub use crate::IrqCfg;
 use crate::{
-    clock::{self, enable_peripheral_clock, PeripheralClocks},
-    gpio::pins::{
+    clock::{enable_peripheral_clock, PeripheralClocks},
+    gpio::pin::{
         AltFunc1, AltFunc2, AltFunc3, Pin, PA16, PA17, PA18, PA19, PA2, PA26, PA27, PA3, PA30,
         PA31, PA8, PA9, PB18, PB19, PB20, PB21, PB22, PB23, PB6, PB7, PB8, PB9,
     },
     pac::{self, uarta as uart_base},
     time::Hertz,
     utility::unmask_irq,
+    PeripheralSelect,
 };
 
 //==================================================================================================
@@ -306,7 +306,7 @@ pub struct UartBase<Uart> {
 }
 /// Serial abstraction. Entry point to create a new UART
 pub struct Uart<Uart, Pins> {
-    uart_base: UartBase<Uart>,
+    inner: UartBase<Uart>,
     pins: Pins,
 }
 
@@ -353,6 +353,7 @@ impl<UART> Tx<UART> {
 pub trait Instance: Deref<Target = uart_base::RegisterBlock> {
     fn ptr() -> *const uart_base::RegisterBlock;
     const IDX: u8;
+    const PERIPH_SEL: PeripheralSelect;
 }
 
 impl<UART: Instance> UartBase<UART> {
@@ -363,12 +364,19 @@ impl<UART: Instance> UartBase<UART> {
             false => 16,
             true => 8,
         };
+
+        // This is the calculation: (64.0 * (x - integer_part as f32) + 0.5) as u32 without floating
+        // point calculations.
+        let frac = ((sys_clk.raw() % (config.baudrate.raw() * 16)) * 64
+            + (config.baudrate.raw() * 8))
+            / (config.baudrate.raw() * 16);
+        // Calculations here are derived from chapter 4.8.5 (p.79) of the datasheet.
         let x = sys_clk.raw() as f32 / (config.baudrate.raw() * baud_multiplier) as f32;
-        let integer_part = floorf(x) as u32;
-        let frac = floorf(64.0 * (x - integer_part as f32) + 0.5) as u32;
-        self.uart
-            .clkscale()
-            .write(|w| unsafe { w.bits(integer_part * 64 + frac) });
+        let integer_part = x as u32;
+        self.uart.clkscale().write(|w| unsafe {
+            w.frac().bits(frac as u8);
+            w.int().bits(integer_part)
+        });
 
         let (paren, pareven) = match config.parity {
             Parity::None => (false, false),
@@ -483,14 +491,34 @@ impl<UART: Instance> UartBase<UART> {
     }
 }
 
-impl<UART, PINS> Uart<UART, PINS>
+impl<UartInstance, PinsInstance> Uart<UartInstance, PinsInstance>
 where
-    UART: Instance,
+    UartInstance: Instance,
+    PinsInstance: Pins<UartInstance>,
 {
+    pub fn new(
+        syscfg: &mut va108xx::Sysconfig,
+        sys_clk: impl Into<Hertz>,
+        uart: UartInstance,
+        pins: PinsInstance,
+        config: impl Into<Config>,
+    ) -> Self {
+        crate::clock::enable_peripheral_clock(syscfg, UartInstance::PERIPH_SEL);
+        Uart {
+            inner: UartBase {
+                uart,
+                tx: Tx::new(),
+                rx: Rx::new(),
+            },
+            pins,
+        }
+        .init(config.into(), sys_clk.into())
+    }
+
     /// This function assumes that the peripheral clock was alredy enabled
     /// in the SYSCONFIG register
     fn init(mut self, config: Config, sys_clk: Hertz) -> Self {
-        self.uart_base = self.uart_base.init(config, sys_clk);
+        self.inner = self.inner.init(config, sys_clk);
         self
     }
 
@@ -501,7 +529,7 @@ where
         irq_cfg: IrqCfg,
         sys_cfg: Option<&mut pac::Sysconfig>,
         irq_sel: Option<&mut pac::Irqsel>,
-    ) -> UartWithIrq<UART, PINS> {
+    ) -> UartWithIrq<UartInstance, PinsInstance> {
         let (uart, pins) = self.downgrade_internal();
         UartWithIrq {
             pins,
@@ -520,75 +548,75 @@ where
 
     #[inline]
     pub fn enable_rx(&mut self) {
-        self.uart_base.enable_rx();
+        self.inner.enable_rx();
     }
 
     #[inline]
     pub fn disable_rx(&mut self) {
-        self.uart_base.enable_rx();
+        self.inner.enable_rx();
     }
 
     #[inline]
     pub fn enable_tx(&mut self) {
-        self.uart_base.enable_tx();
+        self.inner.enable_tx();
     }
 
     #[inline]
     pub fn disable_tx(&mut self) {
-        self.uart_base.disable_tx();
+        self.inner.disable_tx();
     }
 
     #[inline]
     pub fn clear_rx_fifo(&mut self) {
-        self.uart_base.clear_rx_fifo();
+        self.inner.clear_rx_fifo();
     }
 
     #[inline]
     pub fn clear_tx_fifo(&mut self) {
-        self.uart_base.clear_tx_fifo();
+        self.inner.clear_tx_fifo();
     }
 
     #[inline]
     pub fn clear_rx_status(&mut self) {
-        self.uart_base.clear_rx_status();
+        self.inner.clear_rx_status();
     }
 
     #[inline]
     pub fn clear_tx_status(&mut self) {
-        self.uart_base.clear_tx_status();
+        self.inner.clear_tx_status();
     }
 
     pub fn listen(&self, event: Event) {
-        self.uart_base.listen(event);
+        self.inner.listen(event);
     }
 
     pub fn unlisten(&self, event: Event) {
-        self.uart_base.unlisten(event);
+        self.inner.unlisten(event);
     }
 
-    pub fn release(self) -> (UART, PINS) {
-        (self.uart_base.release(), self.pins)
+    pub fn release(self) -> (UartInstance, PinsInstance) {
+        (self.inner.release(), self.pins)
     }
 
-    fn downgrade_internal(self) -> (UartBase<UART>, PINS) {
+    fn downgrade_internal(self) -> (UartBase<UartInstance>, PinsInstance) {
         let base = UartBase {
-            uart: self.uart_base.uart,
-            tx: self.uart_base.tx,
-            rx: self.uart_base.rx,
+            uart: self.inner.uart,
+            tx: self.inner.tx,
+            rx: self.inner.rx,
         };
         (base, self.pins)
     }
 
-    pub fn downgrade(self) -> UartBase<UART> {
+    pub fn downgrade(self) -> UartBase<UartInstance> {
         UartBase {
-            uart: self.uart_base.uart,
-            tx: self.uart_base.tx,
-            rx: self.uart_base.rx,
+            uart: self.inner.uart,
+            tx: self.inner.tx,
+            rx: self.inner.rx,
         }
     }
 
-    pub fn split(self) -> (Tx<UART>, Rx<UART>) {
-        self.uart_base.split()
+    pub fn split(self) -> (Tx<UartInstance>, Rx<UartInstance>) {
+        self.inner.split()
     }
 }
 
@@ -597,6 +625,8 @@ impl Instance for pac::Uarta {
         pac::Uarta::ptr() as *const _
     }
     const IDX: u8 = 0;
+
+    const PERIPH_SEL: PeripheralSelect = PeripheralSelect::Uart0;
 }
 
 impl Instance for pac::Uartb {
@@ -604,36 +634,8 @@ impl Instance for pac::Uartb {
         pac::Uartb::ptr() as *const _
     }
     const IDX: u8 = 1;
-}
 
-macro_rules! uart_impl {
-    ($($UARTX:path: ($uartx:ident, $clk_enb_enum:path),)+) => {
-        $(
-
-            impl<PINS: Pins<$UARTX>> Uart<$UARTX, PINS> {
-                pub fn $uartx(
-                    uart: $UARTX,
-                    pins: PINS,
-                    config: impl Into<Config>,
-                    syscfg: &mut pac::Sysconfig,
-                    sys_clk: impl Into<Hertz>
-                ) -> Self
-                {
-                    enable_peripheral_clock(syscfg, $clk_enb_enum);
-                    Uart {
-                        uart_base: UartBase {
-                            uart,
-                            tx: Tx::new(),
-                            rx: Rx::new(),
-                        },
-                        pins,
-                    }
-                    .init(config.into(), sys_clk.into())
-                }
-            }
-
-        )+
-    }
+    const PERIPH_SEL: PeripheralSelect = PeripheralSelect::Uart1;
 }
 
 impl<UART: Instance> UartWithIrqBase<UART> {
@@ -871,10 +873,12 @@ impl<UART: Instance, PINS> UartWithIrq<UART, PINS> {
     }
 }
 
+/*
 uart_impl! {
     pac::Uarta: (uarta, clock::PeripheralClocks::Uart0),
     pac::Uartb: (uartb, clock::PeripheralClocks::Uart1),
 }
+*/
 
 impl<Uart> Tx<Uart> where Uart: Instance {}
 

va108xx/Cargo.toml

@@ -4,8 +4,8 @@ version = "0.3.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "PAC for the Vorago VA108xx family of microcontrollers"
-homepage = "https://egit.irs.uni-stuttgart.de/rust/va108xx"
-repository = "https://egit.irs.uni-stuttgart.de/rust/va108xx"
+homepage = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
+repository = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
 license = "Apache-2.0"
 keywords = ["no-std", "arm", "cortex-m", "vorago", "va108xx"]
 categories = ["embedded", "no-std", "hardware-support"]
@@ -24,4 +24,4 @@ rt = ["cortex-m-rt/device"]
 
 [package.metadata.docs.rs]
 all-features = true
-rustdoc-args = ["--cfg", "docs_rs", "--generate-link-to-definition"]
+rustdoc-args = ["--generate-link-to-definition"]

va108xx/src/lib.rs

@@ -4,7 +4,7 @@ svd2rust release can be generated by cloning the svd2rust [repository], checking
 #![allow(non_snake_case)]
 #![no_std]
 // Manually inserted.
-#![cfg_attr(docs_rs, feature(doc_auto_cfg))]
+#![cfg_attr(docsrs, feature(doc_auto_cfg))]
 use core::marker::PhantomData;
 use core::ops::Deref;
 #[doc = r"Number available in the NVIC for configuring priority"]

vorago-reb1/CHANGELOG.md

@@ -8,9 +8,13 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
+## [v0.5.1] 2024-07-04
+
+- Update `va108xx-hal` dependency to v0.7.0
+
 ## [v0.5.0] 2024-06-16
 
-- Updated `va108xx` and `va108xx-hal` dependency.
+- Updated `va108xx` to v0.3.0 and `va108xx-hal` dependency to v0.6.0
 
 ## [v0.4.0]
 

vorago-reb1/Cargo.toml

@@ -1,11 +1,11 @@
 [package]
 name = "vorago-reb1"
-version = "0.5.0"
-authors = ["Robin Mueller <robin.mueller.m@gmail.com>"]
+version = "0.5.1"
+authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "Board Support Crate for the Vorago REB1 development board"
-homepage = "https://egit.irs.uni-stuttgart.de/rust/vorago-reb1"
-repository = "https://egit.irs.uni-stuttgart.de/rust/vorago-reb1"
+homepage = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
+repository = "https://egit.irs.uni-stuttgart.de/rust/va108xx-rs"
 license = "Apache-2.0"
 keywords = ["no-std", "reb1", "cortex-m", "vorago", "va108xx"]
 categories = ["aerospace", "embedded", "no-std", "hardware-support"]
@@ -19,15 +19,13 @@ embedded-hal = "1"
 version = "0.3"
 
 [dependencies.va108xx-hal]
-version = "0.6"
-path = "../va108xx-hal"
+version = "0.7"
 features = ["rt"]
 
 [features]
 rt = ["va108xx-hal/rt"]
 
 [dev-dependencies]
-cortex-m-rtic = "1.1"
 panic-halt = "0.2"
 nb = "1"
 
@@ -37,6 +35,14 @@ version = "0.5"
 [dev-dependencies.panic-rtt-target]
 version = "0.1"
 
+[dev-dependencies.rtic]
+version = "2"
+features = ["thumbv6-backend"]
+
+[dev-dependencies.rtic-monotonics]
+version = "1"
+features = ["cortex-m-systick"]
+
 [package.metadata.docs.rs]
 all-features = true
-rustdoc-args = ["--cfg", "docs_rs", "--generate-link-to-definition"]
+rustdoc-args = ["--generate-link-to-definition"]

vorago-reb1/README.md

@@ -6,5 +6,5 @@
 This is the Rust **B**oard **S**upport **P**ackage crate for the Vorago REB1 development board.
 Its aim is to provide drivers for the board features of the REB1 board
 
-The BSP builds on top of the [HAL crate for VA108xx devices](https://egit.irs.uni-stuttgart.de/rust/va108xx-hal).
+The BSP builds on top of the [HAL crate for VA108xx devices](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/va108xx-hal).
 The example folder contains some example applications using the on-board peripherals.

vorago-reb1/examples/adt75-temp-sensor.rs

@@ -13,7 +13,7 @@ fn main() -> ! {
     rprintln!("-- Vorago Temperature Sensor and I2C Example --");
     let mut dp = pac::Peripherals::take().unwrap();
     let mut delay = set_up_ms_delay_provider(&mut dp.sysconfig, 50.MHz(), dp.tim0);
-    let mut temp_sensor = Adt75TempSensor::new(dp.i2ca, 50.MHz(), Some(&mut dp.sysconfig))
+    let mut temp_sensor = Adt75TempSensor::new(&mut dp.sysconfig, 50.MHz(), dp.i2ca)
         .expect("Creating temperature sensor struct failed");
     loop {
         let temp = temp_sensor

vorago-reb1/examples/adxl343-accelerometer.rs

@@ -52,12 +52,12 @@ fn main() -> ! {
         false,
         true,
     );
-    let mut spi = Spi::spib(
+    let mut spi = Spi::new(
+        &mut dp.sysconfig,
+        50.MHz(),
         dp.spib,
         (sck, miso, mosi),
-        50.MHz(),
         spi_cfg,
-        Some(&mut dp.sysconfig),
         Some(&transfer_cfg.downgrade()),
     );
 

vorago-reb1/examples/blinky-button-rtic.rs

@@ -5,6 +5,7 @@
 #[rtic::app(device = pac)]
 mod app {
     use panic_rtt_target as _;
+    use rtic_monotonics::systick::Systick;
     use rtt_target::{rprintln, rtt_init_default, set_print_channel};
     use va108xx_hal::{
         clock::{set_clk_div_register, FilterClkSel},
@@ -43,10 +44,18 @@ mod app {
     struct Shared {}
 
     #[init]
-    fn init(ctx: init::Context) -> (Shared, Local, init::Monotonics) {
+    fn init(ctx: init::Context) -> (Shared, Local) {
         let channels = rtt_init_default!();
         set_print_channel(channels.up.0);
         rprintln!("-- Vorago Button IRQ Example --");
+        // Initialize the systick interrupt & obtain the token to prove that we did
+        let systick_mono_token = rtic_monotonics::create_systick_token!();
+        Systick::start(
+            ctx.core.SYST,
+            Hertz::from(50.MHz()).raw(),
+            systick_mono_token,
+        );
+
         let mode = match CFG_MODE {
             // Ask mode from user via RTT
             CfgMode::Prompt => prompt_mode(channels.down.0),
@@ -90,7 +99,7 @@ mod app {
             50.MHz(),
             dp.tim0,
         );
-        (Shared {}, Local { leds, button, mode }, init::Monotonics())
+        (Shared {}, Local { leds, button, mode })
     }
 
     // `shared` cannot be accessed from this context

vorago-reb1/examples/blinky-leds.rs

@@ -10,7 +10,7 @@ use cortex_m_rt::entry;
 use embedded_hal::delay::DelayNs;
 use embedded_hal::digital::{OutputPin, StatefulOutputPin};
 use panic_halt as _;
-use va108xx_hal::{gpio::pins::PinsA, pac, prelude::*, timer::set_up_ms_delay_provider};
+use va108xx_hal::{gpio::PinsA, pac, prelude::*, timer::set_up_ms_delay_provider};
 use vorago_reb1::leds::Leds;
 
 // REB LED pin definitions. All on port A

vorago-reb1/examples/max11619-adc.rs

@@ -1,4 +1,7 @@
-//! MAX11619 ADC example applikcation
+//! MAX11619 ADC example application.
+//!
+//! You can turn the potentiometer knob of the REB1 board to measure
+//! different ADC values.
 #![no_main]
 #![no_std]
 
@@ -139,12 +142,12 @@ fn main() -> ! {
         .expect("Setting accelerometer chip select high failed");
 
     let transfer_cfg = TransferConfig::<NoneT>::new(3.MHz(), spi::MODE_0, None, true, false);
-    let spi = Spi::spib(
+    let spi = Spi::new(
+        &mut dp.sysconfig,
+        50.MHz(),
         dp.spib,
         (sck, miso, mosi),
-        50.MHz(),
         spi_cfg,
-        Some(&mut dp.sysconfig),
         Some(&transfer_cfg.downgrade()),
     )
     .downgrade();

vorago-reb1/src/button.rs

@@ -2,8 +2,8 @@
 //!
 //! ## Examples
 //!
-//! - [Button Blinky with IRQs](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1/src/branch/main/examples/blinky-button-irq.rs)
-//! - [Button Blinky with IRQs and RTIC](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1/src/branch/main/examples/blinky-button-rtic.rs)
+//! - [Button Blinky with IRQs](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1/examples/blinky-button-irq.rs)
+//! - [Button Blinky with IRQs and RTIC](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1/examples/blinky-button-rtic.rs)
 use embedded_hal::digital::InputPin;
 use va108xx_hal::{
     gpio::{FilterClkSel, FilterType, InputFloating, InterruptEdge, InterruptLevel, Pin, PA11},

vorago-reb1/src/leds.rs

@@ -2,13 +2,13 @@
 //!
 //! ## Examples
 //!
-//! - [LED example](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1/src/branch/main/examples/blinky-leds.rs)
-//! - [Button Blinky using IRQs](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1/src/branch/main/examples/blinky-button-irq.rs)
-//! - [Button Blinky using IRQs and RTIC](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1/src/branch/main/examples/blinky-button-rtic.rs)
+//! - [LED example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1/examples/blinky-leds.rs)
+//! - [Button Blinky using IRQs](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1/examples/blinky-button-irq.rs)
+//! - [Button Blinky using IRQs and RTIC](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1/examples/blinky-button-rtic.rs)
 use embedded_hal::digital::OutputPin;
 use va108xx_hal::{
-    gpio::dynpins::DynPin,
-    gpio::pins::{Pin, PushPullOutput, PA10, PA6, PA7},
+    gpio::dynpin::DynPin,
+    gpio::pin::{Pin, PushPullOutput, PA10, PA6, PA7},
 };
 
 pub type LD2 = Pin<PA10, PushPullOutput>;

vorago-reb1/src/lib.rs

@@ -1,5 +1,5 @@
 #![no_std]
-#![cfg_attr(docs_rs, feature(doc_auto_cfg))]
+#![cfg_attr(docsrs, feature(doc_auto_cfg))]
 
 pub mod button;
 pub mod leds;

vorago-reb1/src/max11619.rs

@@ -2,7 +2,7 @@
 //!
 //! ## Examples
 //!
-//! - [ADC example](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1/src/branch/main/examples/max11619-adc.rs)
+//! - [ADC example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1/examples/max11619-adc.rs)
 use core::convert::Infallible;
 use embedded_hal::spi::SpiDevice;
 use max116xx_10bit::{

vorago-reb1/src/temp_sensor.rs

@@ -4,10 +4,10 @@
 //!
 //! ## Examples
 //!
-//! - [Temperature Sensor example](https://egit.irs.uni-stuttgart.de/rust/vorago-reb1/src/branch/main/examples/adt75-temp-sensor.rs)
+//! - [Temperature Sensor example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/vorago-reb1/examples/adt75-temp-sensor.rs
 use embedded_hal::i2c::{I2c, SevenBitAddress};
 use va108xx_hal::{
-    i2c::{Error, I2cMaster, I2cSpeed, MasterConfig},
+    i2c::{Error, I2cMaster, I2cSpeed, InitError, MasterConfig},
     pac,
     time::Hertz,
 };
@@ -29,20 +29,40 @@ pub enum RegAddresses {
     OneShot = 0x04,
 }
 
+#[derive(Debug)]
+pub enum AdtInitError {
+    Init(InitError),
+    I2c(Error),
+}
+
+impl From<InitError> for AdtInitError {
+    fn from(value: InitError) -> Self {
+        Self::Init(value)
+    }
+}
+
+impl From<Error> for AdtInitError {
+    fn from(value: Error) -> Self {
+        Self::I2c(value)
+    }
+}
+
 impl Adt75TempSensor {
     pub fn new(
-        i2ca: pac::I2ca,
+        sys_cfg: &mut pac::Sysconfig,
         sys_clk: impl Into<Hertz> + Copy,
-        sys_cfg: Option<&mut pac::Sysconfig>,
+        i2ca: pac::I2ca,
     ) -> Result<Self, Error> {
         let mut sensor = Adt75TempSensor {
-            sensor_if: I2cMaster::i2ca(
+            // The master construction can not fail for regular I2C speed.
+            sensor_if: I2cMaster::new(
+                sys_cfg,
+                sys_clk,
                 i2ca,
                 MasterConfig::default(),
-                sys_clk,
                 I2cSpeed::Regular100khz,
-                sys_cfg,
-            ),
+            )
+            .unwrap(),
             cmd_buf: [RegAddresses::Temperature as u8],
             current_reg: RegAddresses::Temperature,
         };

vscode/launch.json

@@ -18,6 +18,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/blinky-leds",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -28,9 +39,20 @@
             "device": "Cortex-M0",
             "svdFile": "./va108xx/svd/va108xx.svd.patched",
             "preLaunchTask": "rust: cargo build hal tests",
-            "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/tests",
+            "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/board-tests",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -44,6 +66,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/rtt-log",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -57,6 +90,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/blinky-button-irq",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -70,6 +114,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/timer-ticks",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -83,6 +138,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/uart",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -96,6 +162,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/spi",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -109,11 +186,22 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/adt75-temp-sensor",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
             "request": "launch",
-            "name": "Debug Button Blinky RTIC",
+            "name": "Button Blinky RTIC Example",
             "servertype": "jlink",
             "cwd": "${workspaceRoot}",
             "device": "Cortex-M0",
@@ -122,11 +210,22 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/blinky-button-rtic",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
             "request": "launch",
-            "name": "Debug PWM",
+            "name": "PWM Example",
             "servertype": "jlink",
             "cwd": "${workspaceRoot}",
             "device": "Cortex-M0",
@@ -135,11 +234,22 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/pwm",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
             "request": "launch",
-            "name": "Debug Cascade",
+            "name": "Cascade Example",
             "servertype": "jlink",
             "cwd": "${workspaceRoot}",
             "device": "Cortex-M0",
@@ -148,11 +258,22 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/cascade",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
             "request": "launch",
-            "name": "Debug Accelerometer",
+            "name": "Accelerometer Example",
             "servertype": "jlink",
             "cwd": "${workspaceRoot}",
             "device": "Cortex-M0",
@@ -161,6 +282,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/adxl343-accelerometer",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
@@ -178,7 +310,7 @@
         {
             "type": "cortex-debug",
             "request": "launch",
-            "name": "Debug ADC",
+            "name": "ADC Example",
             "servertype": "jlink",
             "cwd": "${workspaceRoot}",
             "device": "Cortex-M0",
@@ -187,11 +319,22 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/max11619-adc",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
         {
             "type": "cortex-debug",
             "request": "launch",
-            "name": "Debug UART IRQ",
+            "name": "UART IRQ Example",
             "servertype": "jlink",
             "cwd": "${workspaceRoot}",
             "device": "Cortex-M0",
@@ -200,6 +343,17 @@
             "executable": "${workspaceFolder}/target/thumbv6m-none-eabi/debug/examples/uart-irq-rtic",
             "interface": "jtag",
             "runToEntryPoint": "main",
+            "rttConfig": {
+                "enabled": true,
+                "address": "0x10000000",
+                "decoders": [
+                    {
+                        "port": 0,
+                        "timestamp": true,
+                        "type": "console"
+                    }
+                ]
+            }
         },
     ]
 }

vscode/tasks.json

@@ -21,10 +21,8 @@
             "command": "~/.cargo/bin/cargo", // note: full path to the cargo
             "args": [
                 "build",
-                "-p",
-                "va108xx-hal",
                 "--bin",
-                "tests",
+                "board-tests",
                 "--features",
                 "rt"
             ],
@@ -39,8 +37,6 @@
             "command": "~/.cargo/bin/cargo", // note: full path to the cargo
             "args": [
                 "build",
-                "-p",
-                "va108xx-hal",
                 "--example",
                 "rtt-log",
             ],
@@ -55,8 +51,6 @@
             "command": "~/.cargo/bin/cargo", // note: full path to the cargo
             "args": [
                 "build",
-                "-p",
-                "va108xx-hal",
                 "--example",
                 "timer-ticks",
                 "--features",
@@ -89,8 +83,6 @@
             "command": "~/.cargo/bin/cargo", // note: full path to the cargo
             "args": [
                 "build",
-                "-p",
-                "va108xx-hal",
                 "--example",
                 "spi",
             ],
@@ -105,8 +97,6 @@
             "command": "~/.cargo/bin/cargo", // note: full path to the cargo
             "args": [
                 "build",
-                "-p",
-                "va108xx-hal",
                 "--example",
                 "pwm",
                 "--features",
@@ -123,8 +113,6 @@
             "command": "~/.cargo/bin/cargo", // note: full path to the cargo
             "args": [
                 "build",
-                "-p",
-                "va108xx-hal",
                 "--example",
                 "cascade",
                 "--features",
@@ -141,8 +129,6 @@
             "command": "~/.cargo/bin/cargo", // note: full path to the cargo
             "args": [
                 "build",
-                "-p",
-                "va108xx-hal",
                 "--example",
                 "uart-irq-rtic",
                 "--features",