add release checklist

Reviewed-on: #197

CHANGELOG.md

@@ -10,19 +10,7 @@ list yields a list of all related PRs for each release.
 
 # [unreleased]
 
-# [v5.0.0]
-
-## Changed
-
-- Force flag for copy helper.
-
-# [v4.1.0] 2023-06-14
-
-## Added
-
-- Some BPX battery commands
-
-# [v4.0.0] 2023-06-10
+# [v4.0.0] to be released
 
 `tmtccmd` version: v5.0.0rc0
 
@@ -37,12 +25,6 @@ list yields a list of all related PRs for each release.
 - Fix for PLOC power switching.
 - Bump `tmtccmd` to v5.0.0rc0 for important bugfix in CFDP header.
 
-# [v3.1.2] 2023-06-19
-
-## Fixed
-
-- Pin `tmtccmd` to v4.1.3 to enforce correct `spacepackets` version on install
-
 # [v3.1.1] 2023-04-17
 
 ## Added

automation/Dockerfile

@@ -1,9 +0,0 @@
-FROM python:3
-
-RUN apt-get update
-RUN apt-get --yes upgrade
-#tzdata is a dependency, won't install otherwise
-ARG DEBIAN_FRONTEND=noninteractive
-
-#pip needs a valid user to work
-RUN adduser --uid 114 jenkins

automation/Jenkinsfile

@@ -1,14 +0,0 @@
-pipeline {
-    agent {
-        docker {
-            image 'eive-tmtc-ci:d2'
-        }
-    }
-    stages {
-        stage('Package') {
-            steps {
-                sh 'pip install .'
-            }
-        }
-    }
-}

eive_tmtc/__init__.py

@@ -1,10 +1,10 @@
-__version__ = "5.0.0"
+__version__ = "4.0.0"
 
 import logging
 from pathlib import Path
 
 SW_NAME = "eive-tmtc"
-VERSION_MAJOR = 5
+VERSION_MAJOR = 4
 VERSION_MINOR = 0
 VERSION_REVISION = 0
 

eive_tmtc/config/definitions.py

@@ -70,7 +70,7 @@ class CustomServiceList(str, enum.Enum):
     TIME = "time"
     PROCEDURE = "proc"
     RTD = "rtd"
-    TMP1075 = "tmp1075"
+    TMP1075 = "tcs_tmp"
     TVTTESTPROCEDURE = "tvtestproc"
     SCEX = "scex"
     TM_STORE = "tm_store"

eive_tmtc/config/events.csv

@@ -271,7 +271,6 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 14010;0x36ba;TRYING_I2C_RECOVERY;HIGH;I2C is unavailable. Trying recovery of I2C bus by power cycling all I2C devices.;mission/sysDefs.h
 14011;0x36bb;I2C_REBOOT;HIGH;I2C is unavailable. Recovery did not work, performing full reboot.;mission/sysDefs.h
 14012;0x36bc;PDEC_REBOOT;HIGH;PDEC recovery through reset was not possible, performing full reboot.;mission/sysDefs.h
-14013;0x36bd;FIRMWARE_INFO;INFO;Version information of the firmware (not OBSW). P1: Byte 0: Major, Byte 1: Minor, Byte 2: Patch, Byte 3: Has Git Hash P2: First four letters of Git SHA is the last byte of P1 is set.;mission/sysDefs.h
 14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/tcsDefs.h
 14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/tcsDefs.h
 14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h

eive_tmtc/config/object_ids.py

@@ -34,7 +34,6 @@ HEATER_CONTROLLER_ID = bytes([0x44, 0x41, 0x00, 0xA4])
 TMP1075_HANDLER_TCS_BRD_0_ID = bytes([0x44, 0x42, 0x00, 0x04])
 TMP1075_HANDLER_TCS_BRD_1_ID = bytes([0x44, 0x42, 0x00, 0x05])
 TMP1075_HANDLER_PLPCDU_0_ID = bytes([0x44, 0x42, 0x00, 0x06])
-TMP1075_HANDLER_PLPCDU_1_ID = bytes([0x44, 0x42, 0x00, 0x07])
 TMP1075_HANDLER_IF_BRD_ID = bytes([0x44, 0x42, 0x00, 0x08])
 
 # Communication Object IDs

eive_tmtc/pus_tc/procedure_packer.py

@@ -106,7 +106,6 @@ def handle_default_procedure(  # noqa C901: Complexity okay here.
             "0": ("TMP1075 TCS Board 0", TMP1075_HANDLER_TCS_BRD_0_ID),
             "1": ("TMP1075 TCS Board 1", TMP1075_HANDLER_TCS_BRD_1_ID),
             "2": ("TMP1075 PL PCDU 0", TMP1075_HANDLER_PLPCDU_0_ID),
-            "3": ("TMP1075 PL PCDU 1", oids.TMP1075_HANDLER_PLPCDU_1_ID),
             "4": ("TMP1075 IF Board", TMP1075_HANDLER_IF_BRD_ID),
         }
         input_helper = InputHelper(menu_dict)

eive_tmtc/pus_tm/hk_handling.py

@@ -13,7 +13,6 @@ from eive_tmtc.tmtc.payload.ploc_supervisor import handle_supv_hk_data
 from eive_tmtc.tmtc.acs.reaction_wheels import handle_rw_hk_data
 from eive_tmtc.tmtc.com.syrlinks_handler import handle_syrlinks_hk_data
 from eive_tmtc.tmtc.tcs import handle_thermal_controller_hk_data
-from eive_tmtc.tmtc.tcs.tmp1075 import handle_tmp_1075_hk_data
 from spacepackets.ecss import PusTelemetry
 from tmtccmd.tm.pus_3_fsfw_hk import (
     Service3Base,
@@ -44,8 +43,6 @@ _LOGGER = logging.getLogger(__name__)
 
 
 FORWARD_SENSOR_TEMPS = False
-# TODO: Transform this into a CLI argument
-HK_OUTPUT_LEVEL = 1
 
 
 def handle_hk_packet(
@@ -72,7 +69,6 @@ def handle_hk_packet(
             hk_data=hk_data,
         )
         try:
-            if HK_OUTPUT_LEVEL > 0:
             handle_regular_hk_print(
                 printer=printer,
                 object_id=named_obj_id,
@@ -175,14 +171,6 @@ def handle_regular_hk_print(  # noqa C901: Complexity okay here
         return handle_str_hk_data(set_id=set_id, hk_data=hk_data, pw=pw)
     elif objb == obj_ids.PLOC_SUPV_ID:
         return handle_supv_hk_data(set_id=set_id, hk_data=hk_data, pw=pw)
-    elif objb in [
-        obj_ids.TMP1075_HANDLER_TCS_BRD_0_ID,
-        obj_ids.TMP1075_HANDLER_TCS_BRD_1_ID,
-        obj_ids.TMP1075_HANDLER_IF_BRD_ID,
-        obj_ids.TMP1075_HANDLER_PLPCDU_0_ID,
-        obj_ids.TMP1075_HANDLER_PLPCDU_1_ID,
-    ]:
-        return handle_tmp_1075_hk_data(set_id=set_id, hk_data=hk_data, pw=pw)
     elif objb == obj_ids.ACS_CONTROLLER:
         return handle_acs_ctrl_hk_data(
             pw=pw, set_id=set_id, hk_data=hk_data, packet_time=packet_dt

eive_tmtc/tmtc/__init__.py

@@ -5,4 +5,3 @@ from .time import add_time_cmds
 from .health import add_health_cmd_defs
 from .system import add_system_cmd_defs
 from .tm_store import add_persistent_tm_store_cmd_defs
-from .tcs import add_tmp_sens_cmds

eive_tmtc/tmtc/core.py

@@ -32,7 +32,6 @@ class ActionId(enum.IntEnum):
     RESET_REBOOT_COUNTER = 6
     SWITCH_IMG_LOCK = 7
     SET_MAX_REBOOT_CNT = 8
-    READ_REBOOT_MECHANISM_INFO = 9
     UPDATE_OBSW_FROM_SD_0 = 10
     UPDATE_OBSW_FROM_SD_1 = 11
     UPDATE_OBSW_FROM_TMP = 12
@@ -88,14 +87,13 @@ class OpCode:
     SWITCH_TO_SD_0 = ["switch_to_sd_0"]
     SWITCH_TO_SD_1 = ["switch_to_sd_1"]
     SWITCH_TO_BOTH_SD_CARDS = ["switch_to_both_sd_cards"]
-    READ_REBOOT_MECHANISM_INFO = "rbh_info"
-    ENABLE_REBOOT_FILE_HANDLING = "rbh_off"
-    DISABLE_REBOOT_FILE_HANDLING = "rbh_on"
-    RESET_ALL_REBOOT_COUNTERS = "rbh_reset_a"
-    RESET_REBOOT_COUNTER_00 = "rbh_reset_00"
-    RESET_REBOOT_COUNTER_01 = "rbh_reset_01"
-    RESET_REBOOT_COUNTER_10 = "rbh_reset_10"
-    RESET_REBOOT_COUNTER_11 = "rbh_reset_11"
+    ENABLE_REBOOT_FILE_HANDLING = ["rbh_off"]
+    DISABLE_REBOOT_FILE_HANDLING = ["rbh_on"]
+    RESET_ALL_REBOOT_COUNTERS = ["rbh_reset_a"]
+    RESET_REBOOT_COUNTER_00 = ["rbh_reset_00"]
+    RESET_REBOOT_COUNTER_01 = ["rbh_reset_01"]
+    RESET_REBOOT_COUNTER_10 = ["rbh_reset_10"]
+    RESET_REBOOT_COUNTER_11 = ["rbh_reset_11"]
     SET_MAX_REBOOT_CNT = ["rbh_max_cnt"]
 
 
@@ -112,7 +110,6 @@ class Info:
     OBSW_UPDATE_FROM_SD_0 = "Update OBSW from SD Card 0"
     OBSW_UPDATE_FROM_SD_1 = "Update OBSW from SD Card 1"
     OBSW_UPDATE_FROM_TMP = "Update OBSW from tmp folder"
-    READ_REBOOT_MECHANISM_INFO = "Read reboot mechansm information"
     SWITCH_TO_SD_0 = "Switch to SD card 0"
     SWITCH_TO_SD_1 = "Switch to SD card 1"
     SWITCH_TO_BOTH_SD_CARDS = "Switch to both SD cards with specified active card"
@@ -157,9 +154,6 @@ def add_core_controller_definitions(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.XSC_REBOOT_1_0, info="Reboot 1 0")
     oce.add(keys=OpCode.XSC_REBOOT_1_1, info="Reboot 1 1")
     oce.add(keys=OpCode.SET_PREF_SD, info=Info.SET_PREF_SD)
-    oce.add(
-        keys=OpCode.READ_REBOOT_MECHANISM_INFO, info=Info.READ_REBOOT_MECHANISM_INFO
-    )
     oce.add(keys=OpCode.OBSW_UPDATE_FROM_TMP, info=Info.OBSW_UPDATE_FROM_TMP)
     oce.add(keys=OpCode.OBSW_UPDATE_FROM_SD_0, info=Info.OBSW_UPDATE_FROM_SD_0)
     oce.add(keys=OpCode.OBSW_UPDATE_FROM_SD_1, info=Info.OBSW_UPDATE_FROM_SD_1)
@@ -300,15 +294,7 @@ def pack_core_commands(  # noqa C901
             chip=Chip.CHIP_1,
             copy=Copy.COPY_1_GOLD,
         )
-    elif op_code == OpCode.READ_REBOOT_MECHANISM_INFO:
-        q.add_log_cmd(Info.READ_REBOOT_MECHANISM_INFO)
-        q.add_pus_tc(
-            create_action_cmd(
-                object_id=CORE_CONTROLLER_ID,
-                action_id=ActionId.READ_REBOOT_MECHANISM_INFO,
-            )
-        )
-    elif op_code == OpCode.DISABLE_REBOOT_FILE_HANDLING:
+    elif op_code in OpCode.DISABLE_REBOOT_FILE_HANDLING:
         q.add_log_cmd("Disabling reboot file handling")
         user_data = bytearray([0])
         q.add_pus_tc(
@@ -318,7 +304,7 @@ def pack_core_commands(  # noqa C901
                 user_data=user_data,
             )
         )
-    elif op_code == OpCode.ENABLE_REBOOT_FILE_HANDLING:
+    elif op_code in OpCode.ENABLE_REBOOT_FILE_HANDLING:
         q.add_log_cmd("Enabling reboot file handling")
         user_data = bytearray([1])
         q.add_pus_tc(
@@ -328,7 +314,7 @@ def pack_core_commands(  # noqa C901
                 user_data=user_data,
             )
         )
-    elif op_code == OpCode.RESET_ALL_REBOOT_COUNTERS:
+    elif op_code in OpCode.RESET_ALL_REBOOT_COUNTERS:
         q.add_log_cmd("Resetting all reboot counters")
         q.add_pus_tc(
             create_action_cmd(
@@ -336,13 +322,13 @@ def pack_core_commands(  # noqa C901
                 action_id=ActionId.RESET_REBOOT_COUNTER,
             )
         )
-    elif op_code == OpCode.RESET_REBOOT_COUNTER_00:
+    elif op_code in OpCode.RESET_REBOOT_COUNTER_00:
         reset_specific_boot_counter(q, 0, 0)
-    elif op_code == OpCode.RESET_REBOOT_COUNTER_01:
+    elif op_code in OpCode.RESET_REBOOT_COUNTER_01:
         reset_specific_boot_counter(q, 0, 1)
-    elif op_code == OpCode.RESET_REBOOT_COUNTER_10:
+    elif op_code in OpCode.RESET_REBOOT_COUNTER_10:
         reset_specific_boot_counter(q, 1, 0)
-    elif op_code == OpCode.RESET_REBOOT_COUNTER_11:
+    elif op_code in OpCode.RESET_REBOOT_COUNTER_11:
         reset_specific_boot_counter(q, 1, 1)
     elif op_code in OpCode.OBSW_UPDATE_FROM_SD_0:
         q.add_log_cmd(Info.OBSW_UPDATE_FROM_SD_0)
@@ -399,17 +385,14 @@ def pack_core_commands(  # noqa C901
                     domain_id=0,
                     unique_id=ParamId.PREF_SD,
                     parameter=pref_sd,
-                )
+                ).pack()
             )
         )
     elif op_code == OpCode.CP_HELPER:
         cp_recursive = int(input("Copy recursively (0/1) ?: "))
         if cp_recursive not in [0, 1]:
             raise ValueError("Invalid value, only 0 or 1 allowed")
-        cp_force = int(input("Copy with force option(0/1) ?: "))
-        if cp_force not in [0, 1]:
-            raise ValueError("Invalid value, only 0 or 1 allowed")
-        user_data = bytearray([cp_recursive, cp_force])
+        user_data = bytearray([cp_recursive])
         user_data.extend(packet_source_dest_path("Copy"))
         q.add_log_cmd(Info.CP_HELPER)
         q.add_pus_tc(
@@ -620,51 +603,7 @@ def handle_core_hk_data(pw: PrintWrapper, set_id: int, hk_data: bytes):
 def handle_core_ctrl_action_replies(
     action_id: int, pw: PrintWrapper, custom_data: bytes
 ):
-    if action_id == ActionId.READ_REBOOT_MECHANISM_INFO:
-        handle_reboot_mechanism_info_reply(pw, custom_data)
-    elif action_id == ActionId.LIST_DIR_DUMP_DIRECTLY:
-        handle_list_dir_dump_reply(pw, custom_data)
-
-
-def handle_reboot_mechanism_info_reply(pw: PrintWrapper, custom_data: bytes):
-    pw.dlog("Received reboot mechansm information")
-    fmt_str = "!BIIIIIBBBBBBBB"
-    inc_len = struct.calcsize(fmt_str)
-    if len(custom_data) < inc_len:
-        raise ValueError(f"Received custom data shorter than expected {inc_len}")
-    (
-        enabled,
-        max_count,
-        img00_count,
-        img01_count,
-        img10_count,
-        img11_count,
-        img00_lock,
-        img01_lock,
-        img10_lock,
-        img11_lock,
-        last_chip,
-        last_copy,
-        next_chip,
-        next_copy,
-    ) = struct.unpack(fmt_str, custom_data[:inc_len])
-    pw.dlog(f"Enabled: {enabled}")
-    pw.dlog(f"Max Count: {max_count}")
-    pw.dlog(f"Count 00: {img00_count}")
-    pw.dlog(f"Count 01: {img01_count}")
-    pw.dlog(f"Count 10: {img10_count}")
-    pw.dlog(f"Count 11: {img11_count}")
-    pw.dlog(f"Lock 00: {img00_lock}")
-    pw.dlog(f"Lock 01: {img01_lock}")
-    pw.dlog(f"Lock 10: {img10_lock}")
-    pw.dlog(f"Lock 11: {img11_lock}")
-    pw.dlog(f"Last Chip: {last_chip}")
-    pw.dlog(f"Last Copy: {last_copy}")
-    pw.dlog(f"Next Chip: {next_chip}")
-    pw.dlog(f"Next Copy: {next_copy}")
-
-
-def handle_list_dir_dump_reply(pw: PrintWrapper, custom_data: bytes):
+    if action_id == ActionId.LIST_DIR_DUMP_DIRECTLY:
         if len(custom_data) < 4:
             _LOGGER.warning("Data unexpectedly small")
             return
@@ -694,7 +633,9 @@ def handle_list_dir_dump_reply(pw: PrintWrapper, custom_data: bytes):
         else:
             path = Path("dir_listing.txt")
             remove_if_exists_and_new(seq_idx, path)
-        pw.dlog(f"Compression option: {compressed}. Dumping file into dir_listing.txt")
+            pw.dlog(
+                f"Compression option: {compressed}. Dumping file into dir_listing.txt"
+            )
             with open(path, "a") as listing_file:
                 listing_file_str = custom_data[file_data_offset:].decode()
                 listing_file.write(listing_file_str)

eive_tmtc/tmtc/power/bpx_batt.py

@@ -28,30 +28,18 @@ class BpxSetId(enum.IntEnum):
 class BpxActionId:
     REBOOT = 2
     RESET_COUNTERS = 3
-    CONFIG_CMD = 4
+    SET_CFG = 4
     GET_CFG = 5
-    SET_CFG = 6
-    MAN_HEATER_ON = 10
-    MAN_HEATER_OFF = 11
-
-
-class BpxHeaterModeSelect(enum.IntEnum):
-    OFF = 0
-    AUTO = 1
 
 
 class BpxOpCode:
-    HK = "hk"
-    OFF = "off"
-    ON = "on"
-    RST_CFG = "reset_cfg"
-    SET_CFG = "set_cfg"
-    MAN_HEATER_ON = "man_heater_on"
-    MAN_HEATER_OFF = "man_heater_off"
-    RST_BOOT_CNT = "rst_boot_cnt"
-    REQUEST_CFG = "cfg"
-    REQUEST_CFG_HK = "cfg_hk"
-    REBOOT = "reboot"
+    HK = ["0", "hk"]
+    OFF = ["off"]
+    ON = ["on"]
+    RST_BOOT_CNT = ["1", "rst_boot_cnt"]
+    REQUEST_CFG = ["2", "cfg"]
+    REQUEST_CFG_HK = ["3", "cfg_hk"]
+    REBOOT = ["4", "reboot"]
 
 
 @tmtc_definitions_provider
@@ -61,10 +49,6 @@ def add_bpx_cmd_definitions(defs: TmtcDefinitionWrapper):
     oce.add(keys=BpxOpCode.OFF, info="Off command")
     oce.add(keys=BpxOpCode.HK, info="Request BPX HK")
     oce.add(keys=BpxOpCode.RST_BOOT_CNT, info="Reset Boot Count")
-    oce.add(keys=BpxOpCode.RST_CFG, info="Reset Config to stored default settings")
-    oce.add(keys=BpxOpCode.SET_CFG, info="Set BPX configuration")
-    oce.add(keys=BpxOpCode.MAN_HEATER_ON, info="Manual heater on")
-    oce.add(keys=BpxOpCode.MAN_HEATER_OFF, info="Manual heater off")
     oce.add(keys=BpxOpCode.REQUEST_CFG, info="Request Configuration Struct (Step 1)")
     oce.add(
         keys=BpxOpCode.REQUEST_CFG_HK, info="Request Configuration Struct HK (Step 2)"
@@ -78,14 +62,14 @@ def add_bpx_cmd_definitions(defs: TmtcDefinitionWrapper):
 
 
 @service_provider(CustomServiceList.BPX_BATTERY.value)
-def pack_bpx_commands(p: ServiceProviderParams):  # noqa C901: Complexity is okay here.
+def pack_bpx_commands(p: ServiceProviderParams):
     op_code = p.op_code
     q = p.queue_helper
-    if op_code == BpxOpCode.HK:
+    if op_code in BpxOpCode.HK:
         q.add_log_cmd("Requesting BPX battery HK set")
         sid = make_sid(object_id=BPX_HANDLER_ID, set_id=BpxSetId.GET_HK_SET)
         q.add_pus_tc(generate_one_hk_command(sid=sid))
-    if op_code == BpxOpCode.OFF:
+    if op_code in BpxOpCode.OFF:
         q.add_log_cmd("Off mode")
         mode_cmd = pack_mode_data(BPX_HANDLER_ID, Mode.OFF, 0)
         q.add_pus_tc(
@@ -95,7 +79,7 @@ def pack_bpx_commands(p: ServiceProviderParams):  # noqa C901: Complexity is oka
                 app_data=mode_cmd,
             )
         )
-    if op_code == BpxOpCode.ON:
+    if op_code in BpxOpCode.ON:
         q.add_log_cmd("On mode")
         mode_cmd = pack_mode_data(BPX_HANDLER_ID, Mode.ON, 0)
         q.add_pus_tc(
@@ -105,71 +89,27 @@ def pack_bpx_commands(p: ServiceProviderParams):  # noqa C901: Complexity is oka
                 app_data=mode_cmd,
             )
         )
-    if op_code == BpxOpCode.RST_BOOT_CNT:
+    if op_code in BpxOpCode.RST_BOOT_CNT:
         q.add_log_cmd("Resetting reboot counters")
         q.add_pus_tc(
             create_action_cmd(
                 object_id=BPX_HANDLER_ID, action_id=BpxActionId.RESET_COUNTERS
             )
         )
-    if op_code == BpxOpCode.RST_CFG:
-        q.add_log_cmd("Reset BPX configuration")
-        q.add_pus_tc(
-            create_action_cmd(
-                object_id=BPX_HANDLER_ID, action_id=BpxActionId.CONFIG_CMD
-            )
-        )
-    if op_code == BpxOpCode.SET_CFG:
-        q.add_log_cmd("Setting BPX configuration")
-        user_data = bytearray()
-        batt_mode = BpxHeaterModeSelect(
-            int(input("BPX heater mode select, 0 for OFF 1 for AUTO: "))
-        )
-        user_data.append(batt_mode)
-        lower_limit = int(input("Lower heater limit (-2 default): "))
-        user_data.append(struct.pack("!b", lower_limit)[0])
-        upper_limit = int(input("Upper heater limit (3 default): "))
-        user_data.append(struct.pack("!b", upper_limit)[0])
-        q.add_pus_tc(
-            create_action_cmd(
-                object_id=BPX_HANDLER_ID,
-                action_id=BpxActionId.SET_CFG,
-                user_data=user_data,
-            )
-        )
-    if op_code == BpxOpCode.REQUEST_CFG:
+    if op_code in BpxOpCode.REQUEST_CFG:
         q.add_log_cmd("Requesting configuration struct")
         q.add_pus_tc(
             create_action_cmd(object_id=BPX_HANDLER_ID, action_id=BpxActionId.GET_CFG)
         )
-    if op_code == BpxOpCode.REQUEST_CFG_HK:
+    if op_code in BpxOpCode.REQUEST_CFG_HK:
         q.add_log_cmd("Requesting configuration struct HK")
         sid = make_sid(object_id=BPX_HANDLER_ID, set_id=BpxSetId.GET_CFG_SET)
         q.add_pus_tc(generate_one_hk_command(sid=sid))
-    if op_code == BpxOpCode.REBOOT:
+    if op_code in BpxOpCode.REBOOT:
         q.add_log_cmd("Rebooting BPX battery")
         q.add_pus_tc(
             create_action_cmd(object_id=BPX_HANDLER_ID, action_id=BpxActionId.REBOOT)
         )
-    if op_code == BpxOpCode.MAN_HEATER_ON:
-        q.add_log_cmd("BPX manual heater on with seconds burntime")
-        burn_time = int(input("BPX heater burn time in seconds [1-65535]: "))
-        if burn_time < 1 or burn_time > 65535:
-            raise ValueError("Invalid burntime, smaller than 0 or larger than 65535")
-        q.add_pus_tc(
-            create_action_cmd(
-                object_id=BPX_HANDLER_ID,
-                action_id=BpxActionId.MAN_HEATER_ON,
-                user_data=struct.pack("!H", burn_time),
-            )
-        )
-    if op_code == BpxOpCode.MAN_HEATER_OFF:
-        q.add_log_cmd("BPX manual heater off")
-        q.add_pus_tc(
-            create_action_cmd(
-                object_id=BPX_HANDLER_ID, action_id=BpxActionId.MAN_HEATER_OFF
-            )
-        )
 
 
 HEADER_LIST = [

eive_tmtc/tmtc/tcs/__init__.py

@@ -1,2 +1 @@
 from .tm import *  # noqa
-from .tmp1075 import add_tmp_sens_cmds

eive_tmtc/tmtc/tcs/subsystem.py

@@ -13,7 +13,6 @@ from tmtccmd.tc.pus_200_fsfw_mode import Mode, create_announce_mode_recursive_co
 from tmtccmd.tc.pus_3_fsfw_hk import (
     make_sid,
     generate_one_hk_command,
-    create_enable_periodic_hk_command_with_interval,
     create_request_one_diag_command,
 )
 
@@ -22,7 +21,6 @@ class OpCodeSys:
     OFF = ["off"]
     NML = ["nml"]
     REQUEST_PRIMARY_TEMP_SET = ["temp"]
-    ENABLE_TEMP_SET = "enable_temp_set"
     REQUEST_DEVICE_TEMP_SET = ["temp_devs"]
     REQUEST_DEVICE_SUS_SET = ["temp_sus"]
     REQUEST_HEATER_INFO = "heater_info"
@@ -32,7 +30,6 @@ class OpCodeSys:
 class InfoSys:
     OFF = "Switch TCS subsystem OFF"
     NML = "Switch TCS subsystem NORMAL (nominal)"
-    ENABLE_TEMP_SET = "Enable Primary Temperature Set"
     REQUEST_PRIMARY_TEMP_SET = "Request HK set of primary sensor temperatures"
     REQUEST_DEVICE_TEMP_SET = "Request HK set of device sensor temperatures"
     REQUEST_DEVICE_SUS_SET = "Request HK set of the SUS temperatures"
@@ -70,13 +67,6 @@ def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
     if op_code in OpCodeSys.NML:
         q.add_log_cmd(InfoSys.NML)
         pack_mode_cmd_with_info(TCS_SUBSYSTEM_ID, Mode.NORMAL, 0, q, InfoSys.OFF)
-    if op_code == OpCodeSys.ENABLE_TEMP_SET:
-        interval_seconds = float(input("Please specify interval in seconds: "))
-        cmds = create_enable_periodic_hk_command_with_interval(
-            False, make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS), interval_seconds
-        )
-        for cmd in cmds:
-            q.add_pus_tc(cmd)
     if op_code == OpCodeSys.ANNOUNCE_MODES:
         q.add_log_cmd(InfoSys.ANNOUNCE_MODES)
         q.add_pus_tc(create_announce_mode_recursive_command(TCS_SUBSYSTEM_ID))
@@ -97,9 +87,8 @@ def add_tcs_subsystem_cmds(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCodeSys.REQUEST_DEVICE_SUS_SET, info=InfoSys.REQUEST_DEVICE_SUS_SET)
     oce.add(keys=OpCodeSys.REQUEST_HEATER_INFO, info=InfoSys.REQUEST_HEATER_INFO)
     oce.add(keys=OpCodeSys.ANNOUNCE_MODES, info=InfoSys.ANNOUNCE_MODES)
-    oce.add(keys=OpCodeSys.ENABLE_TEMP_SET, info=InfoSys.ENABLE_TEMP_SET)
     defs.add_service(
         name=CustomServiceList.TCS,
-        info="TCS",
+        info="TCS Board",
         op_code_entry=oce,
     )

eive_tmtc/tmtc/tcs/tmp1075.py

@@ -6,17 +6,14 @@
 @date   06.01.2021
 """
 import enum
-import struct
 
 from eive_tmtc.config.definitions import CustomServiceList
-from eive_tmtc.pus_tm.defs import PrintWrapper
 from spacepackets.ecss.tc import PusTelecommand
 from tmtccmd.config.tmtc import (
     tmtc_definitions_provider,
     TmtcDefinitionWrapper,
     OpCodeEntry,
 )
-from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
 from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.tc.pus_200_fsfw_mode import Mode, pack_mode_data
 from tmtccmd.tc.pus_3_fsfw_hk import create_request_one_hk_command, make_sid
@@ -79,10 +76,3 @@ def add_tmp_sens_cmds(defs: TmtcDefinitionWrapper):
     oce.add(OpCode.NML, Info.NML)
     oce.add(OpCode.HK, Info.HK)
     defs.add_service(CustomServiceList.TMP1075.value, "TMP1075 Temperature Sensor", oce)
-
-
-def handle_tmp_1075_hk_data(set_id: int, hk_data: bytes, pw: PrintWrapper):
-    if set_id == SetId.TEMPERATURE:
-        temp = struct.unpack("!f", hk_data[0:4])[0]
-        pw.dlog(f"TMP1075 Temperature: {temp}")
-        pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[4:], 1))