new io bard file

This commit is contained in:
Robin Müller 2020-10-13 01:05:02 +02:00
parent 51554fe4a6
commit 325f7c0bca
3 changed files with 199 additions and 169 deletions

165
IOBoard.cpp Normal file
View File

@ -0,0 +1,165 @@
#include "IOBoard.h"
#include <SPI.h>
#include "ArduinoConfig.h"
#include "helper/SimpleRingBuffer.h"
#include "helper/DleEncoder.h"
#include "helper/crc_ccitt.h"
SimpleRingBuffer ringBuffer(RING_BUFFER_SIZE, true);
uint8_t rawData[2 * RING_BUFFER_SIZE];
size_t rawDataSize = 0;
namespace IOBoard {
void handleNewData() {
ringBuffer.readData(rawData, sizeof(rawData), true, &rawDataSize);
if (rawDataSize == 0) {
return;
}
//look for STX
size_t firstSTXinRawData = 0;
while ((firstSTXinRawData < rawDataSize)
&& (rawData[firstSTXinRawData] != DleEncoder::STX)) {
Serial.println(rawData[firstSTXinRawData]);
firstSTXinRawData++;
}
if (rawData[firstSTXinRawData] != DleEncoder::STX) {
//there is no STX in our data, throw it away...
Serial.println("NO STX");
ringBuffer.deleteData(rawDataSize);
return;
}
uint8_t packet[MAX_PACKET_LENGTH];
size_t packetLen;
size_t readSize;
ReturnValue_t result = DleEncoder::decode(rawData + firstSTXinRawData,
rawDataSize - firstSTXinRawData, &readSize, packet, sizeof(packet),
&packetLen);
size_t toDelete = firstSTXinRawData;
if (result == HasReturnvaluesIF::RETURN_OK) {
handlePacket(packet, packetLen);
// after handling the packet, we can delete it from the raw stream,
// it has been copied to packet
toDelete += readSize;
}
//remove Data which was processed
ringBuffer.deleteData(toDelete);
}
void handlePacket(uint8_t *packet, size_t packetLen) {
/* Paket layout is:
------------------------------
|byte | field |
| | |
|------------------------------|
|1 | 8 bit command |
|------------------------------|
|1 | 8 bit address |
|------------------------------|
|2 | 16bit length |
|------------------------------|
|length | <length> byte data |
|------------------------------|
|2 | 16 bit crc |
|------------------------------|
------------------------------
*/
uint16_t crc = Calculate_CRC(packet, packetLen);
if (crc != 0) {
Serial.println("invalid Checksum");
return;
}
uint16_t payloadLen = (packet[2] << 8) | packet[3];
if (payloadLen != packetLen - 6) {
Serial.println("invalid len");
return;
}
uint8_t command = packet[0];
uint8_t address = packet[1];
switch (command) {
case COMMAND_TRANSFER_SPI:
transferSPI(address, packet + 4, payloadLen);
//echo the data back, no need to change the header fields, they are the same
//checksum will be written by sendReply()
//check reply:
Serial.println("Data response check: ");
for(size_t i =0; i< packetLen; i++){
Serial.print("packet nr ");Serial.print(i);Serial.print(" ");
Serial.println(packet[i]);
}
sendReply(packet, packetLen);
break;
default:
Serial.println("invalid command");
break;
}
}
void transferSPI(uint8_t address, uint8_t *data, size_t datalen) {
SPI.beginTransaction(SPISettings(14000000, MSBFIRST, SPI_MODE3));
// The specified address is the bit where the last bit is port 0
// and the first bit is port 7. It is inverted because the SPI protocol
// requires the slave select to be driven low.
CS_PORT = ~address;
SPI.transfer(data, datalen);
delay(100);
// Pull the slave select high again.
CS_PORT = 0xff;
SPI.endTransaction();
}
/**
* Encode and send the data, last two bytes of data are assumed to be for the checksum
* and will be overwritten with it
*/
void sendReply(uint8_t *data, size_t len) {
uint16_t crc = Calculate_CRC(data, len - 2);
data[len - 2] = crc >> 8;
data[len - 1] = crc;
//we're being conservative here
//TODO move this to global so other protocols can use it too
uint8_t buffer[2 * len + 2];
buffer[0] = DleEncoder::STX;
size_t writtenLen;
ReturnValue_t result = DleEncoder::encode(data, len, buffer, sizeof(buffer),
&writtenLen, true);
if (result != HasReturnvaluesIF::RETURN_OK) {
return;
}
Serial.write(buffer, writtenLen);
}
//TODO check if this is thread safe by arduino
void serialEvent() {
//Serial.println(ringBuffer.availableWriteSpace());
//uint8_t i = 0;
while (Serial.available()>0) {
uint8_t byte = Serial.read();
ringBuffer.writeData(&byte, 1);
}
//Serial.println(ringBuffer.availableWriteSpace());
}
}

17
IOBoard.h Normal file
View File

@ -0,0 +1,17 @@
#ifndef IOBOARD_H_
#define IOBOARD_H_
#include <Arduino.h>
namespace IOBoard {
void handleNewData();
void handlePacket(uint8_t *packet, size_t packetLen);
void transferSPI(uint8_t address, uint8_t *data, size_t datalen);
void sendReply(uint8_t *data, size_t len);
}
#endif /* IOBOARD_H_ */

160
main.cpp
View File

@ -1,9 +1,7 @@
#include <Arduino.h> #include <Arduino.h>
#include "IOBoard.h"
#include "ArduinoConfig.h" #include "ArduinoConfig.h"
#include "helper/SimpleRingBuffer.h"
#include "helper/DleEncoder.h"
#include "helper/crc_ccitt.h"
#include <avr/io.h> #include <avr/io.h>
@ -11,158 +9,6 @@
//from the core and we need to include it explicitly //from the core and we need to include it explicitly
#include <SPI.h> #include <SPI.h>
SimpleRingBuffer ringBuffer(RING_BUFFER_SIZE, true);
uint8_t rawData[2 * RING_BUFFER_SIZE];
size_t rawDataSize = 0;
/**
* Encode and send the data, last two bytes of data are assumed to be for the checksum
* and will be overwritten with it
*/
void sendData(uint8_t *data, size_t len) {
uint16_t crc = Calculate_CRC(data, len - 2);
data[len - 2] = crc >> 8;
data[len - 1] = crc;
//we're being conservative here
//TODO move this to global so other protocols can use it too
uint8_t buffer[2 * len + 2];
buffer[0] = DleEncoder::STX;
size_t writtenLen;
ReturnValue_t result = DleEncoder::encode(data, len, buffer, sizeof(buffer),
&writtenLen, true);
if (result != HasReturnvaluesIF::RETURN_OK) {
return;
}
Serial.write(buffer, writtenLen);
}
void transferSPI(uint8_t address, uint8_t *data, size_t datalen) {
SPI.beginTransaction(SPISettings(14000000, MSBFIRST, SPI_MODE3));
// The specified address is the bit where the last bit is port 0
// and the first bit is port 7. It is inverted because the SPI protocol
// requires the slave select to be driven low.
CS_PORT = ~address;
SPI.transfer(data, datalen);
delay(100);
// Pull the slave select high again.
CS_PORT = 0xff;
SPI.endTransaction();
}
void handlePacket(uint8_t *packet, size_t packetLen) {
/* Paket layout is:
------------------------------
|byte | field |
| | |
|------------------------------|
|1 | 8 bit command |
|------------------------------|
|1 | 8 bit address |
|------------------------------|
|2 | 16bit length |
|------------------------------|
|length | <length> byte data |
|------------------------------|
|2 | 16 bit crc |
|------------------------------|
------------------------------
*/
uint16_t crc = Calculate_CRC(packet, packetLen);
if (crc != 0) {
Serial.println("invalid Checksum");
return;
}
uint16_t payloadLen = (packet[2] << 8) | packet[3];
if (payloadLen != packetLen - 6) {
Serial.println("invalid len");
return;
}
uint8_t command = packet[0];
uint8_t address = packet[1];
switch (command) {
case COMMAND_TRANSFER_SPI:
transferSPI(address, packet + 4, payloadLen);
//echo the data back, no need to change the header fields, they are the same
//checksum will be written by sendData()
//check reply:
Serial.println("Data response check: ");
for(size_t i =0; i< packetLen; i++){
Serial.print("packet nr ");Serial.print(i);Serial.print(" ");
Serial.println(packet[i]);
}
sendData(packet, packetLen);
break;
default:
Serial.println("invalid command");
break;
}
}
void handleNewData() {
ringBuffer.readData(rawData, sizeof(rawData), true, &rawDataSize);
if (rawDataSize == 0) {
return;
}
//look for STX
size_t firstSTXinRawData = 0;
while ((firstSTXinRawData < rawDataSize)
&& (rawData[firstSTXinRawData] != DleEncoder::STX)) {
Serial.println(rawData[firstSTXinRawData]);
firstSTXinRawData++;
}
if (rawData[firstSTXinRawData] != DleEncoder::STX) {
//there is no STX in our data, throw it away...
Serial.println("NO STX");
ringBuffer.deleteData(rawDataSize);
return;
}
uint8_t packet[MAX_PACKET_LENGTH];
size_t packetLen;
size_t readSize;
ReturnValue_t result = DleEncoder::decode(rawData + firstSTXinRawData,
rawDataSize - firstSTXinRawData, &readSize, packet, sizeof(packet),
&packetLen);
size_t toDelete = firstSTXinRawData;
if (result == HasReturnvaluesIF::RETURN_OK) {
handlePacket(packet, packetLen);
// after handling the packet, we can delete it from the raw stream,
// it has been copied to packet
toDelete += readSize;
}
//remove Data which was processed
ringBuffer.deleteData(toDelete);
}
//TODO check if this is thread safe by arduino
void serialEvent() {
//Serial.println(ringBuffer.availableWriteSpace());
//uint8_t i = 0;
while (Serial.available()>0) {
uint8_t byte = Serial.read();
ringBuffer.writeData(&byte, 1);
}
//Serial.println(ringBuffer.availableWriteSpace());
}
void setup() { void setup() {
// Set data direction of selected port to output. // Set data direction of selected port to output.
@ -183,6 +29,8 @@ void setup() {
} }
void loop() { void loop() {
handleNewData(); IOBoard::handleNewData();
delay(1000); delay(1000);
} }