events/fwSubsystemIdRanges.h

@@ -18,6 +18,8 @@ enum {
 	SYSTEM_MANAGER = 74,
 	SYSTEM_MANAGER_1 = 75,
 	SYSTEM_1 = 79,
+	PUS_SERVICE_1 = 80,
+	FW_SUBSYSTEM_ID_RANGE
 };
 }
 

framework.mk

@@ -55,3 +55,4 @@ CXXSRC += $(wildcard $(FRAMEWORK_PATH)/tmtcpacket/*.cpp)
 CXXSRC += $(wildcard $(FRAMEWORK_PATH)/tmtcpacket/packetmatcher/*.cpp)
 CXXSRC += $(wildcard $(FRAMEWORK_PATH)/tmtcpacket/pus/*.cpp)
 CXXSRC += $(wildcard $(FRAMEWORK_PATH)/tmtcservices/*.cpp)
+CXXSRC += $(wildcard $(FRAMEWORK_PATH)/pus/*.cpp)

pus/CService200ModeCommanding.cpp

@@ -0,0 +1,119 @@
+#include <framework/pus/CService200ModeCommanding.h>
+#include <framework/pus/servicepackets/Service200Packets.h>
+
+#include <framework/modes/HasModesIF.h>
+#include <framework/serviceinterface/ServiceInterfaceStream.h>
+#include <framework/serialize/SerialLinkedListAdapter.h>
+#include <framework/modes/ModeMessage.h>
+
+CService200ModeCommanding::CService200ModeCommanding(object_id_t objectId,
+        uint16_t apid, uint8_t serviceId):
+        CommandingServiceBase(objectId, apid, serviceId,
+	    NUMBER_OF_PARALLEL_COMMANDS,COMMAND_TIMEOUT_SECONDS) {}
+
+CService200ModeCommanding::~CService200ModeCommanding() {}
+
+ReturnValue_t CService200ModeCommanding::isValidSubservice(uint8_t subservice) {
+	switch(subservice) {
+	case(Subservice::COMMAND_MODE_COMMAND):
+	case(Subservice::COMMAND_MODE_READ):
+	case(Subservice::COMMAND_MODE_ANNCOUNCE):
+		return RETURN_OK;
+	default:
+		return AcceptsTelecommandsIF::INVALID_SUBSERVICE;
+	}
+}
+
+
+ReturnValue_t CService200ModeCommanding::getMessageQueueAndObject(
+		uint8_t subservice, const uint8_t *tcData, size_t tcDataLen,
+		MessageQueueId_t *id, object_id_t *objectId) {
+    if(tcDataLen < sizeof(object_id_t)) {
+        return CommandingServiceBase::INVALID_TC;
+    }
+    SerializeAdapter::deSerialize(objectId, &tcData, &tcDataLen,
+            SerializeIF::Endianness::BIG);
+
+	return checkInterfaceAndAcquireMessageQueue(id,objectId);
+}
+
+ReturnValue_t CService200ModeCommanding::checkInterfaceAndAcquireMessageQueue(
+        MessageQueueId_t* messageQueueToSet, object_id_t* objectId) {
+    HasModesIF * destination = objectManager->get<HasModesIF>(*objectId);
+    if(destination == nullptr) {
+        return CommandingServiceBase::INVALID_OBJECT;
+
+    }
+
+    *messageQueueToSet = destination->getCommandQueue();
+    return HasReturnvaluesIF::RETURN_OK;
+}
+
+
+ReturnValue_t CService200ModeCommanding::prepareCommand(
+		CommandMessage* message,uint8_t subservice, const uint8_t *tcData,
+		size_t tcDataLen, uint32_t *state, object_id_t objectId) {
+	ModePacket modeCommandPacket;
+	ReturnValue_t result = modeCommandPacket.deSerialize(&tcData,
+			&tcDataLen, SerializeIF::Endianness::BIG);
+	if (result != RETURN_OK) {
+		return result;
+	}
+
+	ModeMessage::setModeMessage(dynamic_cast<CommandMessage*>(message),
+	        ModeMessage::CMD_MODE_COMMAND, modeCommandPacket.getMode(),
+	        modeCommandPacket.getSubmode());
+	return result;
+}
+
+
+ReturnValue_t CService200ModeCommanding::handleReply(
+		const CommandMessage* reply, Command_t previousCommand,
+		uint32_t *state, CommandMessage* optionalNextCommand,
+		object_id_t objectId, bool *isStep) {
+	Command_t replyId = reply->getCommand();
+	ReturnValue_t result = HasReturnvaluesIF::RETURN_FAILED;
+	switch(replyId) {
+	case(ModeMessage::REPLY_MODE_REPLY): {
+		result = prepareModeReply(reply, objectId);
+		break;
+	}
+	case(ModeMessage::REPLY_WRONG_MODE_REPLY): {
+		result = prepareWrongModeReply(reply, objectId);
+		break;
+	}
+	case(ModeMessage::REPLY_CANT_REACH_MODE): {
+		result = prepareCantReachModeReply(reply, objectId);
+		break;
+	}
+	case(ModeMessage::REPLY_MODE_INFO):
+		result = INVALID_REPLY;
+		break;
+	default:
+		result = RETURN_FAILED;
+	}
+	return result;
+}
+
+ReturnValue_t CService200ModeCommanding::prepareModeReply(
+		const CommandMessage *reply, object_id_t objectId) {
+	ModePacket modeReplyPacket(objectId,
+			ModeMessage::getMode(reply),
+			ModeMessage::getSubmode(reply));
+	return sendTmPacket(Subservice::REPLY_MODE_REPLY, &modeReplyPacket);
+}
+
+ReturnValue_t CService200ModeCommanding::prepareWrongModeReply(
+		const CommandMessage *reply, object_id_t objectId) {
+	ModePacket wrongModeReply(objectId, ModeMessage::getMode(reply),
+			ModeMessage::getSubmode(reply));
+	return sendTmPacket(Subservice::REPLY_WRONG_MODE_REPLY, &wrongModeReply);
+}
+
+ReturnValue_t CService200ModeCommanding::prepareCantReachModeReply(
+		const CommandMessage *reply, object_id_t objectId) {
+	CantReachModePacket cantReachModePacket(objectId,
+	        ModeMessage::getCantReachModeReason(reply));
+	return sendTmPacket(Subservice::REPLY_CANT_REACH_MODE,
+	        &cantReachModePacket);
+}

pus/CService200ModeCommanding.h

@@ -0,0 +1,85 @@
+#ifndef FRAMEWORK_PUS_CSERVICE200MODECOMMANDING_H_
+#define FRAMEWORK_PUS_CSERVICE200MODECOMMANDING_H_
+
+#include <framework/tmtcservices/CommandingServiceBase.h>
+
+/**
+ * @brief Custom PUS service to set mode of all objects implementing HasModesIF
+ *
+ * Examples: Device Handlers, Assemblies or Subsystems.
+ * Full Documentation: ECSS-E-ST-70-41C or ECSS-E-70-41A
+ * Dissertation Baetz p. 115, 116, 165-167.
+ *
+ * This is a gateway service. It relays device commands using the software bus.
+ * @ingroup pus_services
+ */
+class CService200ModeCommanding: public CommandingServiceBase {
+public:
+	static constexpr uint8_t NUMBER_OF_PARALLEL_COMMANDS = 4;
+	static constexpr uint16_t COMMAND_TIMEOUT_SECONDS = 60;
+
+	CService200ModeCommanding(object_id_t objectId,
+	        uint16_t apid, uint8_t serviceId);
+	virtual~ CService200ModeCommanding();
+
+protected:
+	//! CommandingServiceBase (CSB) abstract functions. See CSB documentation.
+	ReturnValue_t isValidSubservice(uint8_t subservice) override;
+	ReturnValue_t getMessageQueueAndObject(uint8_t subservice,
+			const uint8_t *tcData, size_t tcDataLen, MessageQueueId_t *id,
+			object_id_t *objectId) override;
+	ReturnValue_t prepareCommand(CommandMessage* message,
+			uint8_t subservice, const uint8_t *tcData, size_t tcDataLen,
+			uint32_t *state, object_id_t objectId) override;
+	ReturnValue_t handleReply(const CommandMessage* reply,
+			Command_t previousCommand, uint32_t *state,
+			CommandMessage* optionalNextCommand, object_id_t objectId,
+			bool *isStep) override;
+
+private:
+	ReturnValue_t checkAndAcquireTargetID(object_id_t* objectIdToSet,
+			const uint8_t* tcData, uint32_t tcDataLen);
+	ReturnValue_t checkInterfaceAndAcquireMessageQueue(
+			MessageQueueId_t* MessageQueueToSet, object_id_t* objectId);
+
+	ReturnValue_t prepareModeReply(const CommandMessage *reply,
+			object_id_t objectId);
+	ReturnValue_t prepareWrongModeReply(const CommandMessage *reply,
+			object_id_t objectId);
+	ReturnValue_t prepareCantReachModeReply(const CommandMessage *reply,
+			object_id_t objectId);
+
+	enum Subservice { //!< [EXPORT] : [COMMENT] Mode Commanding Subservices
+		//!< [EXPORT] : [COMMAND] Command assembly, subsystem or device mode
+		COMMAND_MODE_COMMAND = 1,
+		//!< [EXPORT] : [COMMAND] Command to set the specified Mode,
+		//! regardless of external control flag
+		COMMAND_MODE_COMMAND_FORCED = 2,
+		//!< [EXPORT] : [COMMAND] Read the current mode and
+		//! reply with a REPLY_MODE_REPLY
+		COMMAND_MODE_READ = 3,
+		//!< [EXPORT] : [COMMAND] Trigger an ModeInfo Event.
+		//! This command does NOT have a reply
+		COMMAND_MODE_ANNCOUNCE = 4,
+		//!< [EXPORT] : [COMMAND] Trigger a ModeInfo Event and to send this
+		//! command to every child. This command does NOT have a reply.
+		COMMAND_MODE_ANNOUNCE_RECURSIVELY = 5,
+		//!< [EXPORT] : [REPLY] Reply to a CMD_MODE_COMMAND or CMD_MODE_READ
+		REPLY_MODE_REPLY = 6,
+		//!< [EXPORT] : [REPLY] Reply in case a mode command can't be executed.
+		REPLY_CANT_REACH_MODE = 7,
+		//!< [EXPORT] : [REPLY] Reply to a CMD_MODE_COMMAND, indicating that a
+		//! mode was commanded and a transition started but was aborted,
+		//! the parameters contain the mode that was reached
+		REPLY_WRONG_MODE_REPLY = 8
+	};
+
+	enum modeParameters {
+		MODE_OFF = 0,
+		MODE_ON = 1,
+		MODE_NORMAL = 2,
+		MODE_RAW = 3
+	};
+};
+
+#endif /* FRAMEWORK_PUS_CSERVICE200MODECOMMANDING_H_ */

pus/Service1TelecommandVerification.cpp

@@ -0,0 +1,100 @@
+#include <framework/pus/Service1TelecommandVerification.h>
+#include <framework/pus/servicepackets/Service1Packets.h>
+
+#include <framework/ipc/QueueFactory.h>
+#include <framework/tmtcservices/PusVerificationReport.h>
+#include <framework/tmtcpacket/pus/TmPacketStored.h>
+#include <framework/serviceinterface/ServiceInterfaceStream.h>
+#include <framework/tmtcservices/AcceptsTelemetryIF.h>
+#include <framework/serviceinterface/ServiceInterfaceStream.h>
+
+
+Service1TelecommandVerification::Service1TelecommandVerification(
+        object_id_t objectId, uint16_t apid, uint8_t serviceId,
+        object_id_t targetDestination):
+        SystemObject(objectId), apid(apid), serviceId(serviceId),
+        targetDestination(targetDestination) {
+	tmQueue = QueueFactory::instance()->createMessageQueue();
+}
+
+Service1TelecommandVerification::~Service1TelecommandVerification() {}
+
+MessageQueueId_t Service1TelecommandVerification::getVerificationQueue(){
+	return tmQueue->getId();
+}
+
+
+ReturnValue_t Service1TelecommandVerification::performOperation(
+		uint8_t operationCode){
+	PusVerificationMessage message;
+	ReturnValue_t status = tmQueue->receiveMessage(&message);
+	while(status == HasReturnvaluesIF::RETURN_OK) {
+		status = sendVerificationReport(&message);
+		if(status != HasReturnvaluesIF::RETURN_OK) {
+			return status;
+		}
+		status = tmQueue->receiveMessage(&message);
+	}
+	if (status == MessageQueueIF::EMPTY) {
+		return HasReturnvaluesIF::RETURN_OK;
+	}
+	else {
+		return status;
+	}
+}
+
+
+ReturnValue_t Service1TelecommandVerification::sendVerificationReport(
+		PusVerificationMessage* message) {
+	ReturnValue_t result;
+	if(message->getReportId() % 2 == 0) {
+		result = generateFailureReport(message);
+	} else {
+		result = generateSuccessReport(message);
+	}
+	if(result != HasReturnvaluesIF::RETURN_OK){
+		sif::error << "Service1TelecommandVerification::initialize: "
+		        "Sending verification packet failed !" << std::endl;
+	}
+	return result;
+}
+
+ReturnValue_t Service1TelecommandVerification::generateFailureReport(
+        PusVerificationMessage *message) {
+	FailureReport report(
+			message->getReportId(), message->getTcPacketId(),
+			message->getTcSequenceControl(), message->getStep(),
+			message->getErrorCode(), message->getParameter1(),
+			message->getParameter2());
+	TmPacketStored tmPacket(apid, serviceId, message->getReportId(),
+	        packetSubCounter++, &report);
+	ReturnValue_t result = tmPacket.sendPacket(tmQueue->getDefaultDestination(),
+			tmQueue->getId());
+	return result;
+}
+
+ReturnValue_t Service1TelecommandVerification::generateSuccessReport(
+        PusVerificationMessage *message) {
+	SuccessReport report(message->getReportId(),message->getTcPacketId(),
+			message->getTcSequenceControl(),message->getStep());
+	TmPacketStored tmPacket(apid, serviceId, message->getReportId(),
+	        packetSubCounter++, &report);
+	ReturnValue_t result = tmPacket.sendPacket(tmQueue->getDefaultDestination(),
+			tmQueue->getId());
+	return result;
+}
+
+
+ReturnValue_t Service1TelecommandVerification::initialize() {
+	// Get target object for TC verification messages
+	AcceptsTelemetryIF* funnel = objectManager->
+			get<AcceptsTelemetryIF>(targetDestination);
+	if(funnel == nullptr){
+	    sif::error << "Service1TelecommandVerification::initialize: Specified"
+	            " TM funnel invalid. Make sure it is set up and implements"
+	            " AcceptsTelemetryIF." << std::endl;
+		return ObjectManagerIF::CHILD_INIT_FAILED;
+	}
+	tmQueue->setDefaultDestination(funnel->getReportReceptionQueue());
+	return SystemObject::initialize();
+}

pus/Service1TelecommandVerification.h

@@ -0,0 +1,94 @@
+#ifndef MISSION_PUS_SERVICE1TELECOMMANDVERIFICATION_H_
+#define MISSION_PUS_SERVICE1TELECOMMANDVERIFICATION_H_
+
+#include <framework/objectmanager/SystemObject.h>
+#include <framework/returnvalues/HasReturnvaluesIF.h>
+#include <framework/tasks/ExecutableObjectIF.h>
+#include <framework/tmtcservices/AcceptsVerifyMessageIF.h>
+#include <framework/tmtcservices/PusVerificationReport.h>
+#include <framework/ipc/MessageQueueIF.h>
+
+/**
+ * @brief Verify TC acceptance, start, progress and execution.
+ *
+ * Full Documentation: ECSS-E70-41A p.51
+ *
+ * The telecommand verification service provides the capability for
+ * explicit verification of each distinct stage of execution of a telecommand
+ * packet, from on-board acceptance through to completion of execution.
+ *
+ * Minimum capabilities of this service:
+ *
+ *  - TM[1,1]: Telecommand Acceptance Report - Success.
+ *  - TM[1,2]: Telecommand Acceptance Report - Failure.
+ *
+ * Additional capabilities of this service:
+ *
+ *  - TM[1,3]: Telecommand Execution Started Report - Success (Req. 4).
+ *  - TM[1,4]: Telecommand Execution Started Report - Failure (Req. 3).
+ *  - TM[1,5]: Telecommand Execution Progress Report - Success (Req. 6).
+ *  - TM[1,6]: Telecommand Execution Progress Report - Failure (Req. 5).
+ *  - TM[1,7]: Telecommand Execution Completed Report - Success (Req. 8).
+ *  - TM[1,8]: Telecommand Execution Completed Report - Failure (Req. 7).
+ *
+ * This Service is not inherited from PUSServiceBase unlike other PUS Services
+ * because all services implementing PUSServiceBase use this service to
+ * generate verification reports.
+ * @ingroup pus_services
+ */
+class Service1TelecommandVerification: public AcceptsVerifyMessageIF,
+		public SystemObject,
+		public ExecutableObjectIF,
+		public HasReturnvaluesIF {
+public:
+	static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PUS_SERVICE_1;
+
+	Service1TelecommandVerification(object_id_t objectId,
+	        uint16_t apid, uint8_t serviceId, object_id_t targetDestination);
+	virtual ~Service1TelecommandVerification();
+
+	/**
+	 *
+	 * @return ID of Verification Queue
+	 */
+	virtual MessageQueueId_t getVerificationQueue();
+
+	/**
+	 * Performs the service periodically as specified in init_mission().
+	 * Triggers the handlePacket function to send TC verification messages
+	 * @param operationCode
+	 * @return
+	 */
+	ReturnValue_t performOperation(uint8_t operationCode = 0) override;
+
+	/**
+	 * Initializes the destination for TC verification messages and initializes
+	 * Service 1 as a system object
+	 * @return
+	 */
+	ReturnValue_t initialize() override;
+private:
+	uint16_t apid = 0;
+	uint8_t serviceId = 0;
+
+	object_id_t targetDestination = objects::NO_OBJECT;
+
+	ReturnValue_t sendVerificationReport(PusVerificationMessage* message);
+	ReturnValue_t generateFailureReport(PusVerificationMessage* message);
+	ReturnValue_t generateSuccessReport(PusVerificationMessage* message);
+
+	uint16_t packetSubCounter = 0;
+
+	MessageQueueIF* tmQueue = nullptr;
+
+	enum class Subservice: uint8_t {
+		VERIFY_ACCEPTANCE_SUCCESS = 1, //!< [EXPORT] : [TM]
+		VERIFY_ACCEPTANCE_FAILED = 2, //!< [EXPORT] : [TM]
+		VERIFY_START_SUCCESS = 3, //!< [EXPORT] : [TM]
+		VERIFY_START_FAILED = 4, //!< [EXPORT] : [TM]
+		VERIFY_STEP_SUCCESS = 5, //!< [EXPORT] : [TM]
+		VERIFY_STEP_FAILED = 6 //!< [EXPORT] : [TM]
+	};
+};
+
+#endif /* MISSION_PUS_SERVICE1TELECOMMANDVERIFICATION_H_ */

pus/Service2DeviceAccess.cpp

@@ -0,0 +1,167 @@
+#include <framework/pus/Service2DeviceAccess.h>
+#include <framework/pus/servicepackets/Service2Packets.h>
+
+#include <framework/devicehandlers/DeviceHandlerIF.h>
+#include <framework/storagemanager/StorageManagerIF.h>
+#include <framework/devicehandlers/DeviceHandlerMessage.h>
+#include <framework/serialize/EndianConverter.h>
+#include <framework/action/ActionMessage.h>
+#include <framework/serialize/SerializeAdapter.h>
+#include <framework/serialize/SerialLinkedListAdapter.h>
+#include <framework/serviceinterface/ServiceInterfaceStream.h>
+
+Service2DeviceAccess::Service2DeviceAccess(object_id_t objectId,
+        uint16_t apid, uint8_t serviceId, uint8_t numberOfParallelCommands,
+        uint16_t commandTimeoutSeconds):
+        CommandingServiceBase(objectId, apid, serviceId,
+	        numberOfParallelCommands, commandTimeoutSeconds) {}
+
+Service2DeviceAccess::~Service2DeviceAccess() {}
+
+
+ReturnValue_t Service2DeviceAccess::isValidSubservice(uint8_t subservice) {
+	switch(static_cast<Subservice>(subservice)){
+	case Subservice::RAW_COMMANDING:
+	case Subservice::TOGGLE_WIRETAPPING:
+		return HasReturnvaluesIF::RETURN_OK;
+	default:
+		sif::error << "Invalid Subservice" << std::endl;
+		return AcceptsTelecommandsIF::INVALID_SUBSERVICE;
+	}
+}
+
+ReturnValue_t Service2DeviceAccess::getMessageQueueAndObject(
+		uint8_t subservice, const uint8_t* tcData, size_t tcDataLen,
+		MessageQueueId_t* id, object_id_t* objectId) {
+    if(tcDataLen < sizeof(object_id_t)) {
+        return CommandingServiceBase::INVALID_TC;
+    }
+    SerializeAdapter::deSerialize(objectId, &tcData,
+                &tcDataLen, SerializeIF::Endianness::BIG);
+
+	ReturnValue_t result = checkInterfaceAndAcquireMessageQueue(id,objectId);
+	return result;
+}
+
+ReturnValue_t Service2DeviceAccess::checkInterfaceAndAcquireMessageQueue(
+		MessageQueueId_t * messageQueueToSet, object_id_t *objectId) {
+	DeviceHandlerIF* possibleTarget =
+			objectManager->get<DeviceHandlerIF>(*objectId);
+	if(possibleTarget == nullptr) {
+		return CommandingServiceBase::INVALID_OBJECT;
+	}
+	*messageQueueToSet = possibleTarget->getCommandQueue();
+	return HasReturnvaluesIF::RETURN_OK;
+}
+
+
+ReturnValue_t Service2DeviceAccess::prepareCommand(CommandMessage* message,
+		uint8_t subservice, const uint8_t* tcData, size_t tcDataLen,
+		uint32_t* state, object_id_t objectId) {
+	switch(static_cast<Subservice>(subservice)){
+	case Subservice::RAW_COMMANDING: {
+		return prepareRawCommand(dynamic_cast<CommandMessage*>(message),
+				tcData, tcDataLen);
+	}
+	break;
+	case Subservice::TOGGLE_WIRETAPPING: {
+		return prepareWiretappingCommand(dynamic_cast<CommandMessage*>(message),
+				tcData, tcDataLen);
+	}
+	break;
+	default:
+		return HasReturnvaluesIF::RETURN_FAILED;
+	}
+}
+
+ReturnValue_t Service2DeviceAccess::prepareRawCommand(
+        CommandMessage* messageToSet, const uint8_t *tcData,size_t tcDataLen) {
+	RawCommand RawCommand(tcData,tcDataLen);
+	// store command into the Inter Process Communication Store
+	store_address_t storeAddress;
+	ReturnValue_t result = IPCStore->addData(&storeAddress,
+	        RawCommand.getCommand(), RawCommand.getCommandSize());
+	DeviceHandlerMessage::setDeviceHandlerRawCommandMessage(messageToSet,
+	        storeAddress);
+	return result;
+}
+
+ReturnValue_t Service2DeviceAccess::prepareWiretappingCommand(
+		CommandMessage *messageToSet, const uint8_t *tcData,
+		size_t tcDataLen) {
+	if(tcDataLen != WiretappingToggle::WIRETAPPING_COMMAND_SIZE) {
+		return CommandingServiceBase::INVALID_TC;
+	}
+	WiretappingToggle command;
+	ReturnValue_t result = command.deSerialize(&tcData, &tcDataLen,
+	        SerializeIF::Endianness::BIG);
+	DeviceHandlerMessage::setDeviceHandlerWiretappingMessage(messageToSet,
+			command.getWiretappingMode());
+	return result;
+}
+
+
+ReturnValue_t Service2DeviceAccess::handleReply(const CommandMessage* reply,
+		Command_t previousCommand, uint32_t* state,
+		CommandMessage* optionalNextCommand, object_id_t objectId,
+		bool* isStep) {
+	switch(reply->getCommand()) {
+	case CommandMessage::REPLY_COMMAND_OK:
+		return HasReturnvaluesIF::RETURN_OK;
+	case CommandMessage::REPLY_REJECTED:
+		return reply->getReplyRejectedReason();
+	default:
+		return CommandingServiceBase::INVALID_REPLY;
+	}
+}
+
+// All device handlers set service 2 as default raw receiver for wiretapping
+// so we have to handle those unrequested messages.
+void Service2DeviceAccess::handleUnrequestedReply(CommandMessage* reply) {
+	switch(reply->getCommand()) {
+	case DeviceHandlerMessage::REPLY_RAW_COMMAND:
+		sendWiretappingTm(reply,
+				static_cast<uint8_t>(Subservice::WIRETAPPING_RAW_TC));
+		break;
+	case DeviceHandlerMessage::REPLY_RAW_REPLY:
+		sendWiretappingTm(reply,
+				static_cast<uint8_t>(Subservice::RAW_REPLY));
+		break;
+	default:
+		sif::error << "Unknown message in Service2DeviceAccess::"
+				"handleUnrequestedReply with command ID " <<
+				reply->getCommand() << std::endl;
+		break;
+	}
+	//Must be reached by all cases to clear message
+	reply->clear();
+}
+
+void Service2DeviceAccess::sendWiretappingTm(CommandMessage *reply,
+		uint8_t subservice) {
+	// Raw Wiretapping
+	// Get Address of Data from Message
+	store_address_t storeAddress = DeviceHandlerMessage::getStoreAddress(reply);
+	const uint8_t* data = nullptr;
+	size_t size = 0;
+	ReturnValue_t result = IPCStore->getData(storeAddress, &data, &size);
+	if(result != HasReturnvaluesIF::RETURN_OK){
+		sif::error << "Service2DeviceAccess::sendWiretappingTm: Data Lost in "
+		        "handleUnrequestedReply with failure ID "<< result
+		        << std::endl;
+		return;
+	}
+
+	// Init our dummy packet and correct endianness of object ID before
+	// sending it back.
+	WiretappingPacket TmPacket(DeviceHandlerMessage::getDeviceObjectId(reply),
+	        data);
+	TmPacket.objectId = EndianConverter::convertBigEndian(TmPacket.objectId);
+	sendTmPacket(subservice, TmPacket.data,size, reinterpret_cast<uint8_t*>(
+			&TmPacket.objectId), sizeof(TmPacket.objectId));
+}
+
+MessageQueueId_t Service2DeviceAccess::getDeviceQueue() {
+	return commandQueue->getId();
+}
+

pus/Service2DeviceAccess.h

@@ -0,0 +1,92 @@
+#ifndef FRAMEWORK_PUS_SERVICE2DEVICEACCESS_H_
+#define FRAMEWORK_PUS_SERVICE2DEVICEACCESS_H_
+
+#include <framework/objectmanager/SystemObjectIF.h>
+#include <framework/devicehandlers/AcceptsDeviceResponsesIF.h>
+#include <framework/tmtcservices/CommandingServiceBase.h>
+
+/**
+ * @brief   Raw Commanding and Wiretapping of devices.
+ * @details
+ * Full Documentation: ECSS-E-ST-70-41C or ECSS-E-70-41A
+ * Dissertation Baetz p. 115, 116, 165-167.
+ *
+ * This service provides the capability to communicate with devices in their
+ * native protocols with raw commands through the DeviceHandlerIF.
+ *
+ * This is a gateway service. It relays device commands to the software bus.
+ * This service is very closely tied to the CommandingServiceBase
+ * template class.
+ *
+ * There are 4 adaption points for component implementation through the
+ * CommandingServiceBase.
+ *
+ * This service employs custom subservices exclusively.  This includes a
+ * wiretapping subservice to monitor all traffic between target devices and
+ * this service.
+ *
+ *   - TC[2,128]: Raw Commanding
+ *   - TC[2,129]: Toggle Wiretapping
+ *   - TM[2,130]: Wiretapping Packet TM
+ *   - TM[2,131]: Wiretapping Packet TC
+ * @ingroup pus_services
+ */
+class Service2DeviceAccess : public CommandingServiceBase,
+		public AcceptsDeviceResponsesIF
+{
+public:
+	Service2DeviceAccess(object_id_t objectId, uint16_t apid,
+	        uint8_t serviceId, uint8_t numberOfParallelCommands = 4,
+	        uint16_t commandTimeoutSeconds = 60);
+	virtual ~Service2DeviceAccess();
+
+protected:
+	//! CommandingServiceBase (CSB) abstract functions. See CSB documentation.
+	ReturnValue_t isValidSubservice(uint8_t subservice) override;
+	ReturnValue_t getMessageQueueAndObject(uint8_t subservice,
+	        const uint8_t *tcData, size_t tcDataLen, MessageQueueId_t *id,
+			object_id_t *objectId) override;
+	ReturnValue_t prepareCommand(CommandMessage* message, uint8_t subservice,
+	        const uint8_t *tcData, size_t tcDataLen, uint32_t *state,
+	        object_id_t objectId) override;
+	ReturnValue_t handleReply(const CommandMessage* reply,
+				Command_t previousCommand, uint32_t *state,
+				CommandMessage* optionalNextCommand, object_id_t objectId,
+				bool *isStep) override;
+
+	/**
+	 * @brief 	Generates TM packets containing either the TC wiretapping
+	 * 			packets or the TM wiretapping packets.
+	 * Note that for service 2, all telemetry will be treated as an
+	 * unrequested reply regardless of wiretapping mode.
+	 * @param reply
+	 */
+	void handleUnrequestedReply(CommandMessage* reply) override;
+
+	MessageQueueId_t getDeviceQueue() override;
+private:
+	/**
+	 * Generates TM packets for Wiretapping Service
+	 * @param reply
+	 * @param subservice
+	 */
+	void sendWiretappingTm(CommandMessage* reply,uint8_t subservice);
+
+	ReturnValue_t checkInterfaceAndAcquireMessageQueue(
+	        MessageQueueId_t* messageQueueToSet, object_id_t* objectId);
+
+	ReturnValue_t prepareRawCommand(CommandMessage* messageToSet,
+	        const uint8_t* tcData, size_t tcDataLen);
+	ReturnValue_t prepareWiretappingCommand(CommandMessage* messageToSet,
+	        const uint8_t* tcData, size_t tcDataLen);
+
+	enum class Subservice {
+		RAW_COMMANDING = 128, //!< [EXPORT] : [COMMAND] Command in device native protocol
+		TOGGLE_WIRETAPPING = 129, //!< [EXPORT] : [COMMAND] Toggle wiretapping of raw communication
+		RAW_REPLY = 130, //!< [EXPORT] : [REPLY] Includes wiretapping TM and normal TM raw replies from device
+		WIRETAPPING_RAW_TC = 131 //!< [EXPORT] : [REPLY] Wiretapping packets of commands built by device handler
+	};
+};
+
+
+#endif /* MISSION_PUS_DEVICE2DEVICECOMMANDING_H_ */

pus/Service5EventReporting.cpp

@@ -0,0 +1,91 @@
+#include <framework/pus/Service5EventReporting.h>
+#include <framework/pus/servicepackets/Service5Packets.h>
+
+#include <framework/serviceinterface/ServiceInterfaceStream.h>
+#include <framework/events/EventManagerIF.h>
+#include <framework/ipc/QueueFactory.h>
+#include <framework/tmtcpacket/pus/TmPacketStored.h>
+
+
+Service5EventReporting::Service5EventReporting(object_id_t objectId,
+            uint16_t apid, uint8_t serviceId, size_t maxNumberReportsPerCycle):
+		PusServiceBase(objectId, apid, serviceId),
+		maxNumberReportsPerCycle(maxNumberReportsPerCycle) {
+	eventQueue = QueueFactory::instance()->createMessageQueue();
+}
+
+Service5EventReporting::~Service5EventReporting(){}
+
+ReturnValue_t Service5EventReporting::performService() {
+	EventMessage message;
+	ReturnValue_t status = RETURN_OK;
+	for(uint8_t counter = 0;
+	        counter < maxNumberReportsPerCycle;
+	        counter++)
+	{
+	    // Receive messages even if reporting is disabled for now.
+	    status = eventQueue->receiveMessage(&message);
+	    if(status == MessageQueueIF::EMPTY) {
+	        return HasReturnvaluesIF::RETURN_OK;
+	    }
+
+	    if(enableEventReport) {
+	       status = generateEventReport(message);
+	       if(status != HasReturnvaluesIF::RETURN_OK) {
+	           return status;
+	       }
+	    }
+	}
+	sif::debug <<  "Service5EventReporting::generateEventReport:"
+	        " Too many events" << std::endl;
+	return HasReturnvaluesIF::RETURN_OK;
+}
+
+
+ReturnValue_t Service5EventReporting::generateEventReport(
+		EventMessage message)
+{
+	EventReport report(message.getEventId(),message.getReporter(),
+			message.getParameter1(),message.getParameter2());
+	TmPacketStored tmPacket(PusServiceBase::apid, PusServiceBase::serviceId,
+			message.getSeverity(), packetSubCounter++, &report);
+	ReturnValue_t result = tmPacket.sendPacket(
+	        requestQueue->getDefaultDestination(),requestQueue->getId());
+	if(result != HasReturnvaluesIF::RETURN_OK) {
+		sif::debug << "Service5EventReporting::generateEventReport:"
+		        " Could not send TM packet" << std::endl;
+	}
+	return result;
+}
+
+ReturnValue_t Service5EventReporting::handleRequest(uint8_t subservice) {
+	switch(subservice) {
+	case Subservice::ENABLE: {
+		enableEventReport = true;
+		return HasReturnvaluesIF::RETURN_OK;
+	}
+	case Subservice::DISABLE: {
+		enableEventReport = false;
+		return HasReturnvaluesIF::RETURN_OK;
+	}
+	default:
+		return AcceptsTelecommandsIF::INVALID_SUBSERVICE;
+	}
+}
+
+
+// In addition to the default PUSServiceBase initialization, this service needs
+// to be registered to the event manager to listen for events.
+ReturnValue_t Service5EventReporting::initialize() {
+	EventManagerIF* manager = objectManager->get<EventManagerIF>(
+				objects::EVENT_MANAGER);
+	if (manager == NULL) {
+			return RETURN_FAILED;
+	}
+	// register Service 5 as listener for events
+	ReturnValue_t result =  manager->registerListener(eventQueue->getId(),true);
+	if(result != HasReturnvaluesIF::RETURN_OK) {
+	     return result;
+	}
+	return PusServiceBase::initialize();
+}

pus/Service5EventReporting.h

@@ -0,0 +1,86 @@
+#ifndef FRAMEWORK_PUS_SERVICE5EVENTREPORTING_H_
+#define FRAMEWORK_PUS_SERVICE5EVENTREPORTING_H_
+
+#include <framework/tmtcservices/PusServiceBase.h>
+#include <framework/events/EventMessage.h>
+
+/**
+ * @brief Report on-board events like information or errors
+ * @details
+ * Full Documentation: ECSS-E70-41A p.79
+ * Implements the PusServiceBase template class.
+ * Documentation: Dissertation Baetz p.135,136
+ *
+ * This service provides for the reporting to the service user of information of
+ * operational significance.
+ *   1. reporting of failures or anomalies detected on-board;
+ *   2. reporting of autonomous on-board actions;
+ *   3. reporting of normal progress of operations and activities, e.g.
+ *   detection of events which are not anomalous (such as payload events),
+ *   reaching of predefined steps in an operation. Some reports can combine
+ *   more than one of these events.
+ *
+ * Minimum capabilities of this service:
+ *
+ * - TM[5,1]: Normal/Progress Report
+ * - TM[5,2]: Error/Anomaly Report - Low Severity
+ * - TM[5,3]: Error/Anomaly Report - Medium Severity
+ * - TM[5,4]: Error/Anomaly Report - High Severity
+ *
+ * Events can be translated by using translator files located in
+ * /config/objects/ and /config/events/. Description to events can be added by
+ * adding a comment behind the event definition with [//!<] as leading string
+ *
+ * Additional capabilities of this service:
+ *
+ *  - TC[5,5]: Enable Event Report Generation (Req. 6)
+ *  - TC[5,6]: Disable Event Report Generation (Req. 5)
+ * @author 	R. Mueller
+ * @ingroup pus_services
+ */
+class Service5EventReporting: public PusServiceBase {
+public:
+
+	Service5EventReporting(object_id_t objectId, uint16_t apid,
+	        uint8_t serviceId, size_t maxNumberReportsPerCycle = 10);
+	virtual ~Service5EventReporting();
+
+	/***
+	* Check for events and generate event reports if required.
+	* @return
+	*/
+	ReturnValue_t performService() override;
+
+	/***
+	 * Turn event generation on or off.
+	 * @return
+	 */
+	ReturnValue_t handleRequest(uint8_t subservice) override;
+
+	/**
+	 * The default PusServiceBase initialize has been overridden but is still
+	 * executed. Registers this service as a listener for events at the
+	 * EventManager.
+	 * @return
+	 */
+	ReturnValue_t initialize() override;
+
+	enum Subservice: uint8_t {
+		NORMAL_REPORT = 1, //!< [EXPORT] : [REPLY] Generate normal report
+		ERROR_LOW_SEVERITY = 2, //!< [EXPORT] : [REPLY] Generate error report with low severity
+		ERROR_MED_SEVERITY = 3, //!< [EXPORT] : [REPLY] Generate error report with medium severity
+		ERROR_HIGH_SEVERITY = 4, //!< [EXPORT] : [REPLY] Generate error report with high severity
+		ENABLE = 5, //!< [EXPORT] : [COMMAND] Enable report generation
+		DISABLE = 6 //!< [EXPORT] : [COMMAND] Disable report generation
+	};
+
+private:
+	uint16_t packetSubCounter = 0;
+	MessageQueueIF* eventQueue = nullptr;
+	bool enableEventReport = true;
+	const uint8_t maxNumberReportsPerCycle;
+
+	ReturnValue_t generateEventReport(EventMessage message);
+};
+
+#endif /* MISSION_PUS_SERVICE5EVENTREPORTING_H_ */

pus/Service8FunctionManagement.cpp

@@ -0,0 +1,142 @@
+#include <framework/pus/Service8FunctionManagement.h>
+#include <framework/pus/servicepackets/Service8Packets.h>
+
+#include <framework/objectmanager/SystemObjectIF.h>
+#include <framework/action/HasActionsIF.h>
+#include <framework/devicehandlers/DeviceHandlerIF.h>
+#include <framework/serialize/SerializeAdapter.h>
+#include <framework/serviceinterface/ServiceInterfaceStream.h>
+
+Service8FunctionManagement::Service8FunctionManagement(object_id_t object_id,
+		uint16_t apid, uint8_t serviceId, uint8_t numParallelCommands,
+		uint16_t commandTimeoutSeconds):
+		CommandingServiceBase(object_id, apid, serviceId, numParallelCommands,
+		commandTimeoutSeconds) {}
+
+Service8FunctionManagement::~Service8FunctionManagement() {}
+
+
+ReturnValue_t Service8FunctionManagement::isValidSubservice(
+		uint8_t subservice) {
+	switch(static_cast<Subservice>(subservice)) {
+	case Subservice::DIRECT_COMMANDING:
+		return HasReturnvaluesIF::RETURN_OK;
+	default:
+		return AcceptsTelecommandsIF::INVALID_SUBSERVICE;
+	}
+}
+
+ReturnValue_t Service8FunctionManagement::getMessageQueueAndObject(
+		uint8_t subservice, const uint8_t* tcData, size_t tcDataLen,
+		MessageQueueId_t* id, object_id_t* objectId) {
+	if(tcDataLen < sizeof(object_id_t)) {
+		return CommandingServiceBase::INVALID_TC;
+	}
+	SerializeAdapter::deSerialize(objectId, &tcData,
+			&tcDataLen, SerializeIF::Endianness::BIG);
+
+	return checkInterfaceAndAcquireMessageQueue(id,objectId);
+}
+
+ReturnValue_t Service8FunctionManagement::checkInterfaceAndAcquireMessageQueue(
+		MessageQueueId_t* messageQueueToSet, object_id_t* objectId) {
+	// check HasActionIF property of target
+	HasActionsIF* possibleTarget = objectManager->get<HasActionsIF>(*objectId);
+	if(possibleTarget == nullptr){
+		return CommandingServiceBase::INVALID_OBJECT;
+	}
+	*messageQueueToSet = possibleTarget->getCommandQueue();
+	return HasReturnvaluesIF::RETURN_OK;
+}
+
+
+ReturnValue_t Service8FunctionManagement::prepareCommand(
+		CommandMessage* message, uint8_t subservice, const uint8_t* tcData,
+		size_t tcDataLen, uint32_t* state, object_id_t objectId) {
+	return prepareDirectCommand(dynamic_cast<CommandMessage*>(message),
+				tcData, tcDataLen);
+}
+
+ReturnValue_t Service8FunctionManagement::prepareDirectCommand(
+		CommandMessage *message, const uint8_t *tcData, size_t tcDataLen) {
+    if(tcDataLen < sizeof(object_id_t) + sizeof(ActionId_t)) {
+        sif::debug << "Service8FunctionManagement::prepareDirectCommand:"
+                << " TC size smaller thant minimum size of direct command."
+                << std::endl;
+        return CommandingServiceBase::INVALID_TC;
+    }
+
+	// Create direct command instance by extracting data from Telecommand
+	DirectCommand command(tcData, tcDataLen);
+
+	// store additional parameters into the IPC Store
+	store_address_t parameterAddress;
+	ReturnValue_t result = IPCStore->addData(&parameterAddress,
+			command.getParameters(),command.getParametersSize());
+
+	// setCommand expects a Command Message, an Action ID and a store adress
+	// pointing to additional parameters
+	ActionMessage::setCommand(message,command.getActionId(),parameterAddress);
+	return result;
+}
+
+
+ReturnValue_t Service8FunctionManagement::handleReply(
+		const CommandMessage* reply, Command_t previousCommand,
+		uint32_t* state, CommandMessage* optionalNextCommand,
+		object_id_t objectId, bool* isStep) {
+	Command_t replyId = reply->getCommand();
+	ReturnValue_t result = HasReturnvaluesIF::RETURN_FAILED;
+	ActionId_t actionId = ActionMessage::getActionId(reply);
+	ReturnValue_t returnCode = ActionMessage::getReturnCode(reply);
+
+	switch(replyId)  {
+	case ActionMessage::COMPLETION_SUCCESS: {
+		DirectReply completionReply(objectId, actionId,returnCode);
+		result = CommandingServiceBase::EXECUTION_COMPLETE;
+		break;
+	}
+	case ActionMessage::STEP_SUCCESS: {
+		*isStep = true;
+		result = HasReturnvaluesIF::RETURN_OK;
+		break;
+	}
+	case ActionMessage::DATA_REPLY: {
+	    result = handleDataReply(reply, objectId, actionId);
+		break;
+	}
+	case ActionMessage::STEP_FAILED:
+		*isStep = true;
+		/*No break, falls through*/
+	case ActionMessage::COMPLETION_FAILED:
+		result = ActionMessage::getReturnCode(reply);
+		break;
+	default:
+		result = INVALID_REPLY;
+	}
+	return result;
+}
+
+ReturnValue_t Service8FunctionManagement::handleDataReply(
+        const CommandMessage* reply, object_id_t objectId,
+        ActionId_t actionId) {
+    store_address_t storeId = ActionMessage::getStoreId(reply);
+    size_t size = 0;
+    const uint8_t * buffer = nullptr;
+    ReturnValue_t result = IPCStore->getData(storeId, &buffer, &size);
+    if(result != RETURN_OK) {
+        sif::error << "Service 8: Could not retrieve data for data reply"
+                << std::endl;
+        return result;
+    }
+    DataReply dataReply(objectId, actionId, buffer, size);
+    result = sendTmPacket(static_cast<uint8_t>(
+            Subservice::DIRECT_COMMANDING_DATA_REPLY), &dataReply);
+
+    auto deletionResult = IPCStore->deleteData(storeId);
+    if(deletionResult != HasReturnvaluesIF::RETURN_OK) {
+        sif::warning << "Service8FunctionManagement::handleReply: Deletion"
+                << " of data in pool failed." << std::endl;
+    }
+    return result;
+}

pus/Service8FunctionManagement.h

@@ -0,0 +1,67 @@
+#ifndef FRAMEWORK_PUS_SERVICE8FUNCTIONMANAGEMENT_H_
+#define FRAMEWORK_PUS_SERVICE8FUNCTIONMANAGEMENT_H_
+
+#include <framework/action/ActionMessage.h>
+#include <framework/tmtcservices/CommandingServiceBase.h>
+
+/**
+ * @brief Functional commanding.
+ * Full Documentation: ECSS-E-ST-70-41C p.64, p. 451
+ * Dissertation Baetz p. 115, 116, 165-167
+ *
+ * This service provides the capability to perform functions of an
+ * application process and provides high-level commanding as opposed to the
+ * Raw Access provided by Service 2. Examples for these functions can include
+ * control and operation of payload or the AOCS subsystem.
+ * This service will be the primary means to control the spacecraft as it is
+ * considered safer than the Raw Access provided
+ * by Service 2 and is generally sufficient for most tasks.
+ *
+ * This is a gateway service. It relays device commands using the software bus.
+ * This service is very closely tied to the Commanding Service Base template
+ * class. There is constant interaction between this Service Base und a
+ * subclass like this service.
+ *
+ * Service Capability:
+ * 	 - TC[8,128]: Direct Commanding
+ *   - TM[8,130]: Direct Commanding Data Reply
+ *
+ * @ingroup pus_services
+ */
+class Service8FunctionManagement : public CommandingServiceBase
+{
+public:
+	Service8FunctionManagement(object_id_t objectId, uint16_t apid,
+			uint8_t serviceId, uint8_t numParallelCommands = 4,
+			uint16_t commandTimeoutSeconds = 60);
+	virtual ~Service8FunctionManagement();
+
+protected:
+	/* CSB abstract functions implementation . See CSB documentation. */
+	ReturnValue_t isValidSubservice(uint8_t subservice) override;
+	ReturnValue_t getMessageQueueAndObject(uint8_t subservice,
+			const uint8_t *tcData, size_t tcDataLen, MessageQueueId_t *id,
+			object_id_t *objectId) override;
+	ReturnValue_t prepareCommand(CommandMessage* message,
+				uint8_t subservice, const uint8_t *tcData, size_t tcDataLen,
+				uint32_t *state, object_id_t objectId) override;
+	ReturnValue_t handleReply(const CommandMessage* reply,
+				Command_t previousCommand, uint32_t *state,
+				CommandMessage* optionalNextCommand, object_id_t objectId,
+				bool *isStep) override;
+
+private:
+	enum class Subservice {
+		DIRECT_COMMANDING = 128, //!< [EXPORT] : [COMMAND] Functional commanding
+		DIRECT_COMMANDING_DATA_REPLY = 130, //!< [EXPORT] : [REPLY] Data reply
+	};
+
+	ReturnValue_t checkInterfaceAndAcquireMessageQueue(
+	        MessageQueueId_t* messageQueueToSet, object_id_t* objectId);
+	ReturnValue_t prepareDirectCommand(CommandMessage* message,
+			const uint8_t* tcData, size_t tcDataLen);
+	ReturnValue_t handleDataReply(const CommandMessage* reply,
+	        object_id_t objectId, ActionId_t actionId);
+};
+
+#endif /* FRAMEWORK_PUS_SERVICE8FUNCTIONMANAGEMENT_H_ */

pus/servicepackets/Service1Packets.h

@@ -0,0 +1,166 @@
+/**
+ * @defgroup spacepackets PUS Packet Definitions
+ *  This group contains all implemented TM or TM packages that are sent to
+ *  or sent by the OBC.They are exported later to display
+ *  packet structures in Mission Information Base (MIB).
+ */
+
+#ifndef MISSION_PUS_SERVICEPACKETS_SERVICE1PACKETS_H_
+#define MISSION_PUS_SERVICEPACKETS_SERVICE1PACKETS_H_
+
+#include <framework/serialize/SerializeAdapter.h>
+#include <framework/tmtcservices/VerificationCodes.h>
+
+/**
+ * @brief 	FailureReport class to serialize a failure report
+ * @brief 	Subservice 1, 3, 5, 7
+ * @ingroup spacepackets
+ */
+class FailureReport: public SerializeIF { //!< [EXPORT] : [SUBSERVICE] 1, 3, 5, 7
+public:
+	FailureReport(uint8_t failureSubtype_, uint16_t packetId_,
+			uint16_t packetSequenceControl_, uint8_t stepNumber_,
+			ReturnValue_t errorCode_, uint32_t errorParameter1_,
+			uint32_t errorParameter2_) :
+			packetId(packetId_), packetSequenceControl(packetSequenceControl_),
+			stepNumber(stepNumber_), errorCode(errorCode_),
+			errorParameter1(errorParameter1_), errorParameter2(errorParameter2_),
+			failureSubtype(failureSubtype_) {}
+
+	/**
+	 * This function is called by the FSFW when calling the tm packet send
+	 * function and supplying the SerializeIF* as parameter
+	 * @param buffer Object content is serialized into the buffer
+	 * @param size
+	 * @param max_size
+	 * @param bigEndian
+	 * @return
+	 */
+	virtual ReturnValue_t serialize(uint8_t** buffer, size_t* size,
+	        size_t maxSize, SerializeIF::Endianness streamEndianness
+	        ) const override {
+		ReturnValue_t result = SerializeAdapter::serialize(&packetId, buffer,
+				size, maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		result = SerializeAdapter::serialize(&packetSequenceControl, buffer,
+				size, maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		if (failureSubtype == TC_VERIFY::PROGRESS_FAILURE) {
+			result = SerializeAdapter::serialize(&stepNumber, buffer, size,
+			        maxSize, streamEndianness);
+			if (result != HasReturnvaluesIF::RETURN_OK) {
+				return result;
+			}
+		}
+		result = SerializeAdapter::serialize(&errorCode, buffer, size,
+		        maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		result = SerializeAdapter::serialize(&errorParameter1, buffer, size,
+		        maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+
+		result = SerializeAdapter::serialize(&errorParameter2, buffer, size,
+		        maxSize, streamEndianness);
+		return result;
+	}
+
+
+	virtual size_t getSerializedSize() const {
+		size_t size = 0;
+		size += SerializeAdapter::getSerializedSize(&packetId);
+		size += sizeof(packetSequenceControl);
+		if(failureSubtype==TC_VERIFY::PROGRESS_FAILURE){
+			size += SerializeAdapter::getSerializedSize(&stepNumber);
+		}
+		size += SerializeAdapter::getSerializedSize(&errorCode);
+		size += SerializeAdapter::getSerializedSize(&errorParameter1);
+		size += SerializeAdapter::getSerializedSize(&errorParameter2);
+		return size;
+	}
+
+	/**
+	 * Deserialization is not allowed for a report.
+	 * @param buffer
+	 * @param size
+	 * @param bigEndian
+	 * @return
+	 */
+	ReturnValue_t deSerialize(const uint8_t** buffer, size_t* size,
+	        SerializeIF::Endianness streamEndianness) override {
+		return HasReturnvaluesIF::RETURN_FAILED;
+	}
+private:
+	uint16_t packetId; //!< [EXPORT] : [COMMENT] Packet ID of respective Telecommand
+	uint16_t packetSequenceControl; //!< [EXPORT] : [COMMENT] Packet SSC of respective Telecommand
+	uint8_t stepNumber; //!< [EXPORT] : [OPTIONAL][SUBSERVICE] 6
+	ReturnValue_t errorCode; //!< [EXPORT] : [COMMENT] Error code which can be looked up in generated error code file
+	uint32_t errorParameter1;
+	uint32_t errorParameter2;
+	const uint8_t failureSubtype; //!< [EXPORT] : [IGNORE]
+};
+
+/**
+ * @brief       Subservices 2, 4, 6, 8
+ * @ingroup     spacepackets
+ */
+class SuccessReport: public SerializeIF { //!< [EXPORT] : [SUBSERVICE] 2, 4, 6, 8
+public:
+	SuccessReport(uint8_t subtype_, uint16_t packetId_,
+			uint16_t packetSequenceControl_,uint8_t stepNumber_) :
+			packetId(packetId_), packetSequenceControl(packetSequenceControl_),
+			stepNumber(stepNumber_), subtype(subtype_) {}
+
+	virtual ReturnValue_t serialize(uint8_t** buffer, size_t* size,
+			size_t maxSize, SerializeIF::Endianness streamEndianness
+			) const override {
+		ReturnValue_t result = SerializeAdapter::serialize(&packetId, buffer,
+				size, maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		result = SerializeAdapter::serialize(&packetSequenceControl, buffer,
+				size, maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		if (subtype == TC_VERIFY::PROGRESS_SUCCESS) {
+			result = SerializeAdapter::serialize(&stepNumber, buffer, size,
+					maxSize, streamEndianness);
+			if (result != HasReturnvaluesIF::RETURN_OK) {
+				return result;
+			}
+		}
+		return result;
+	}
+
+	virtual size_t getSerializedSize() const override {
+		size_t size = 0;
+		size += SerializeAdapter::getSerializedSize(&packetId);
+		size += sizeof(packetSequenceControl);
+		if(subtype == TC_VERIFY::PROGRESS_SUCCESS){
+			size += SerializeAdapter::getSerializedSize(&stepNumber);
+		}
+		return size;
+
+	}
+
+	ReturnValue_t deSerialize(const uint8_t** buffer, size_t* size,
+	        SerializeIF::Endianness streamEndianness) override {
+		return HasReturnvaluesIF::RETURN_FAILED;
+	}
+private:
+	uint16_t packetId; //!< [EXPORT] : [COMMENT] Packet ID of respective Telecommand
+	uint16_t packetSequenceControl; //!< [EXPORT] : [COMMENT] Packet SSC of respective Telecommand
+	uint8_t stepNumber; //!< [EXPORT] : [OPTIONAL][SUBSERVICE] 6
+	const uint8_t subtype; //!< [EXPORT] : [IGNORE]
+};
+
+#endif /* MISSION_PUS_SERVICEPACKETS_SERVICE1PACKETS_H_ */

pus/servicepackets/Service200Packets.h

@@ -0,0 +1,63 @@
+#ifndef FRAMEWORK_PUS_SERVICEPACKETS_SERVICE200PACKETS_H_
+#define FRAMEWORK_PUS_SERVICEPACKETS_SERVICE200PACKETS_H_
+
+#include <framework/serialize/SerialLinkedListAdapter.h>
+#include <framework/modes/ModeMessage.h>
+#include <framework/serialize/SerializeIF.h>
+
+/**
+ * @brief Subservice 1, 2, 3, 4, 5
+ * @ingroup spacepackets
+ */
+class ModePacket : public SerialLinkedListAdapter<SerializeIF> { //!< [EXPORT] : [SUBSERVICE] 1, 2, 6
+public:
+
+	ModePacket() {
+		setLinks();
+	}
+
+	ModePacket(object_id_t objectId, Mode_t mode, Submode_t submode) :
+	        objectId(objectId), mode(mode), submode(submode) {
+		setLinks();
+	}
+
+	Mode_t getMode() {
+		return mode.entry;
+	}
+
+	Submode_t getSubmode() {
+		return submode.entry;
+	}
+
+	// Forbid copying, pointers are used.
+	ModePacket(const ModePacket&) = delete;
+	ModePacket& operator=(const ModePacket&) = delete;
+private:
+
+	void setLinks() {
+		setStart(&objectId);
+		objectId.setNext(&mode);
+		mode.setNext(&submode);
+	}
+	SerializeElement<object_id_t> objectId; //!< [EXPORT] : [COMMENT] Target or source object
+	SerializeElement<Mode_t> mode; //!< [EXPORT] : [COMMENT] 0: MODE_OFF, 1: MODE_ON, 2: MODE_NORMAL, 3: MODE_RAW
+	SerializeElement<Submode_t> submode; //!< [EXPORT] : [COMMENT] Usually 0, device specific submode possible
+};
+
+/**
+ * @brief Subservice 7
+ * @ingroup spacepackets
+ */
+class CantReachModePacket: public SerialLinkedListAdapter<SerializeIF> { //!< [EXPORT] : [SUBSERVICE] 7
+public:
+    CantReachModePacket(object_id_t objectId, ReturnValue_t reason):
+            objectId(objectId), reason(reason) {
+        setStart(&this->objectId);
+        this->objectId.setNext(&this->reason);
+    }
+
+    SerializeElement<object_id_t> objectId; //!< [EXPORT] : [COMMENT] Reply source object
+	SerializeElement<ReturnValue_t> reason; //!< [EXPORT] : [COMMENT] Reason the mode could not be reached
+};
+
+#endif /* FRAMEWORK_PUS_SERVICEPACKETS_SERVICE200PACKETS_H_ */

pus/servicepackets/Service2Packets.h

@@ -0,0 +1,76 @@
+#ifndef FRAMEWORK_PUS_SERVICEPACKETS_SERVICE2PACKETS_H_
+#define FRAMEWORK_PUS_SERVICEPACKETS_SERVICE2PACKETS_H_
+
+#include <framework/action/ActionMessage.h>
+#include <framework/objectmanager/SystemObjectIF.h>
+#include <framework/serialize/SerialLinkedListAdapter.h>
+#include <framework/serviceinterface/ServiceInterfaceStream.h>
+
+/**
+ * @brief Subservice 128
+ * @ingroup spacepackets
+ */
+class RawCommand { //!< [EXPORT] : [SUBSERVICE] 128
+public:
+	RawCommand(const uint8_t* buffer, size_t size) {
+		// Deserialize Adapter to get correct endianness
+		SerializeAdapter::deSerialize(&objectId, &buffer, &size,
+		        SerializeIF::Endianness::BIG);
+		commandBuffer = buffer;
+		// size is decremented by AutoSerializeAdapter,
+		// remaining size is data size
+		dataSize = size;
+	}
+	object_id_t getObjectId() const {
+		return objectId;
+	}
+
+	const uint8_t*  getCommand() {
+		return commandBuffer;
+	}
+
+	size_t getCommandSize() const {
+		return dataSize;
+	}
+private:
+	object_id_t objectId = 0;
+	const uint8_t* commandBuffer = nullptr; //!< [EXPORT] : [MAXSIZE] 256 Bytes
+	size_t dataSize = 0; //!< [EXPORT] : [IGNORE]
+};
+
+
+/**
+ * @brief Subservice 129: Command packet to set wiretapping mode
+ * @ingroup spacepackets
+ */
+class WiretappingToggle: public SerialLinkedListAdapter<SerializeIF>{ //!< [EXPORT] : [SUBSERVICE] 129
+public:
+	static const size_t WIRETAPPING_COMMAND_SIZE = 5;
+	WiretappingToggle(){
+		setStart(&objectId);
+		objectId.setNext(&wiretappingMode);
+	}
+
+	uint8_t getWiretappingMode() const {
+		return wiretappingMode.entry;
+	}
+private:
+	SerializeElement<object_id_t> objectId;
+	SerializeElement<uint8_t> wiretappingMode; //!< [EXPORT] : [INPUT] Mode 0: OFF, Mode 1: RAW
+};
+
+
+/**
+ * @brief Subservices 130 and 131: TM packets
+ * @ingroup spacepackets
+ */
+class WiretappingPacket { //!< [EXPORT] : [SUBSERVICE] 130, 131
+public:
+	object_id_t objectId; //!< [EXPORT] : [COMMENT] Object ID of source object
+	const uint8_t* data; //!< [EXPORT] : [MAXSIZE] Raw Command Max. Size
+	WiretappingPacket(object_id_t objectId, const uint8_t* buffer):
+	    objectId(objectId), data(buffer) {
+	}
+};
+
+#endif /* FRAMEWORK_PUS_SERVICEPACKETS_SERVICE2PACKETS_H_ */

pus/servicepackets/Service5Packets.h

@@ -0,0 +1,76 @@
+#ifndef MISSION_PUS_SERVICEPACKETS_SERVICE5PACKETS_H_
+#define MISSION_PUS_SERVICEPACKETS_SERVICE5PACKETS_H_
+
+#include <framework/serialize/SerializeAdapter.h>
+#include <framework/tmtcservices/VerificationCodes.h>
+
+
+/**
+ * @brief Subservice 1, 2, 3, 4
+ * Structure of Event Report.
+ * It consists of:
+ *      1. Report ID(RID). This is the Event ID in the FSFW
+ *      2. Object ID of the reporter (e.g. subsystem)
+ *      2. Parameter 1
+ *      3. Parameter 2
+ *
+ * @ingroup spacepackets
+ */
+class EventReport: public SerializeIF { //!< [EXPORT] : [SUBSERVICE] 1, 2, 3, 4
+public:
+
+	EventReport(EventId_t reportId_, object_id_t objectId_, uint32_t parameter1_,
+			uint32_t parameter2_):
+			reportId(reportId_),objectId(objectId_), parameter1(parameter1_),
+			parameter2(parameter2_) {}
+
+	virtual ReturnValue_t serialize(uint8_t** buffer, size_t* size,
+			size_t maxSize,
+			SerializeIF::Endianness streamEndianness) const override
+	{
+		ReturnValue_t result = SerializeAdapter::serialize(&reportId, buffer,
+				size, maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		result = SerializeAdapter::serialize(&objectId, buffer, size,
+				maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		result = SerializeAdapter::serialize(&parameter1, buffer, size,
+				maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		result = SerializeAdapter::serialize(&parameter2, buffer, size,
+				maxSize, streamEndianness);
+		if (result != HasReturnvaluesIF::RETURN_OK) {
+			return result;
+		}
+		return result;
+	}
+
+	virtual size_t getSerializedSize() const override {
+		uint32_t size = 0;
+		size += SerializeAdapter::getSerializedSize(&reportId);
+		size += SerializeAdapter::getSerializedSize(&objectId);
+		size += SerializeAdapter::getSerializedSize(&parameter1);
+		size += SerializeAdapter::getSerializedSize(&parameter2);
+		return size;
+
+	}
+
+	virtual ReturnValue_t deSerialize(const uint8_t** buffer, size_t* size,
+	        SerializeIF::Endianness streamEndianness) override {
+		return HasReturnvaluesIF::RETURN_FAILED;
+	}
+private:
+	EventId_t reportId;
+	object_id_t objectId;
+	uint32_t parameter1;
+	uint32_t parameter2;
+};
+
+
+#endif /* MISSION_PUS_SERVICEPACKETS_SERVICE5PACKETS_H_ */

pus/servicepackets/Service8Packets.h

@@ -0,0 +1,121 @@
+#ifndef FRAMEWORK_PUS_SERVICEPACKETS_SERVICE8PACKETS_H_
+#define FRAMEWORK_PUS_SERVICEPACKETS_SERVICE8PACKETS_H_
+
+#include <framework/action/ActionMessage.h>
+#include <framework/objectmanager/SystemObjectIF.h>
+#include <framework/serialize/SerialBufferAdapter.h>
+#include <framework/serialize/SerializeElement.h>
+#include <framework/serialize/SerialLinkedListAdapter.h>
+#include <framework/serialize/SerialFixedArrayListAdapter.h>
+
+
+/**
+ * @brief Subservice 128
+ * @ingroup spacepackets
+ */
+class DirectCommand: public SerialLinkedListAdapter<SerializeIF> { //!< [EXPORT] : [SUBSERVICE] 128
+public:
+
+	DirectCommand(const uint8_t* tcData, size_t size) {
+		SerializeAdapter::deSerialize(&objectId, &tcData, &size,
+		        SerializeIF::Endianness::BIG);
+		SerializeAdapter::deSerialize(&actionId, &tcData, &size,
+		        SerializeIF::Endianness::BIG);
+		parameterBuffer = tcData;
+		parametersSize = size;
+	}
+
+	ActionId_t getActionId() const {
+		return actionId;
+	}
+
+	object_id_t getObjectId() const {
+		return objectId;
+	}
+
+	const uint8_t*  getParameters() {
+		return parameterBuffer;
+	}
+
+	uint32_t getParametersSize() const {
+		return parametersSize;
+	}
+
+private:
+	DirectCommand(const DirectCommand &command);
+	object_id_t objectId;
+	ActionId_t actionId;
+	uint32_t parametersSize; //!< [EXPORT] : [IGNORE]
+	const uint8_t * parameterBuffer; //!< [EXPORT] : [MAXSIZE] 65535 Bytes
+
+};
+
+
+/**
+ * @brief Subservice 130
+ * Data reply (subservice 130) consists of
+ *   1. Target Object ID
+ *   2. Action ID
+ *   3. Data
+ * @ingroup spacepackets
+ */
+class DataReply: public SerialLinkedListAdapter<SerializeIF> { //!< [EXPORT] : [SUBSERVICE] 130
+public:
+	typedef uint16_t typeOfMaxDataSize;
+	static const uint16_t MAX_DATA_LENGTH = sizeof(typeOfMaxDataSize);
+	DataReply(object_id_t objectId_, ActionId_t actionId_,
+		const uint8_t * replyDataBuffer_ = NULL, uint16_t replyDataSize_ = 0):
+		objectId(objectId_), actionId(actionId_), replyData(replyDataBuffer_,replyDataSize_){
+		setLinks();
+	}
+
+private:
+	DataReply(const DataReply &reply);
+	void setLinks() {
+		setStart(&objectId);
+		objectId.setNext(&actionId);
+		actionId.setNext(&replyData);
+	}
+	SerializeElement<object_id_t> objectId;
+	SerializeElement<ActionId_t> actionId;
+	SerializeElement<SerialBufferAdapter<uint16_t>> replyData;
+};
+
+
+/**
+ * @brief Subservice 132
+ * @details
+ * Not used yet. Telecommand Verification takes care of this.
+ * @ingroup spacepackets
+ */
+class DirectReply: public SerialLinkedListAdapter<SerializeIF> { //!< [EXPORT] : [SUBSERVICE] 132
+public:
+	typedef uint16_t typeOfMaxDataSize;
+	static const uint16_t MAX_DATA_LENGTH = sizeof(typeOfMaxDataSize);
+
+	DirectReply(object_id_t objectId_, ActionId_t actionId_, ReturnValue_t returnCode_,
+			bool isStep_ = false, uint8_t step_ = 0):
+			isStep(isStep_), objectId(objectId_), actionId(actionId_),
+			returnCode(returnCode_),step(step_)  {
+		setLinks();
+	}
+private:
+
+	void setLinks() {
+		setStart(&objectId);
+		objectId.setNext(&actionId);
+		actionId.setNext(&returnCode);
+		if(isStep) {
+			returnCode.setNext(&step);
+		}
+	}
+
+	bool isStep; //!< [EXPORT] : [IGNORE]
+	SerializeElement<object_id_t> objectId; //!< [EXPORT] : [IGNORE]
+	SerializeElement<ActionId_t> actionId; //!< [EXPORT] : [IGNORE]
+	SerializeElement<ReturnValue_t> returnCode; //!< [EXPORT] : [IGNORE]
+	SerializeElement<uint8_t> step; //!< [EXPORT] : [OPTIONAL] [IGNORE]
+
+};
+
+#endif /* FRAMEWORK_PUS_SERVICEPACKETS_SERVICE8PACKETS_H_ */