Merge pull request 'v1.10.0' (#65 ) from develop into master

Reviewed-on: #65
Merge branch 'master' into develop
2022-05-05 14:35:03 +02:00 · 2022-05-05 14:34:48 +02:00 · 2022-05-05 14:33:13 +02:00 · 2022-05-05 14:33:02 +02:00 · 2022-05-05 14:32:42 +02:00 · 2022-05-05 14:30:28 +02:00
15 changed files with 1357 additions and 1323 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -5,3 +5,4 @@ __pycache__
 log
 /gps_log.txt
 /config/*.json
+tmtc_conf.json
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -0,0 +1,21 @@
+Change Log
+=======
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](http://keepachangelog.com/).
+
+The [milestone](https://egit.irs.uni-stuttgart.de/eive/eive-obsw/milestones)
+list yields a list of all related PRs for each release.
+
+# [unreleased]
+
+# [v1.11.0]
+
+# [v1.10.0 and before]
+
+- Add additional heater commands to command health states
+- Extended heater commands for more informative output which component is heated
+
+See [milestones](https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/milestones)
+and [releases](https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/releases)
--- a/config/events.csv
+++ b/config/events.csv
@@ -1,198 +1,189 @@
-2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2203;0x089b;STORE_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2205;0x089d;STORING_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2211;0x08a3;INIT_DONE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2212;0x08a4;DUMP_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2213;0x08a5;DELETION_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2214;0x08a6;DELETION_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
-2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
-2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
-2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
-4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw\src\fsfw\power\Fuse.h
-4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw\src\fsfw\power\Fuse.h
-4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
-4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
-4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw\src\fsfw\power\PowerSwitchIF.h
-5000;0x1388;HEATER_ON;INFO;;fsfw\src\fsfw\thermal\Heater.h
-5001;0x1389;HEATER_OFF;INFO;;fsfw\src\fsfw\thermal\Heater.h
-5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw\src\fsfw\thermal\Heater.h
-5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw\src\fsfw\thermal\Heater.h
-5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw\src\fsfw\thermal\Heater.h
-5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
-5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
-5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
-5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
-5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
-5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
-5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
-5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
-7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
-7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
-7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
-7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
-7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
-7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
-7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
-7400;0x1ce8;CHANGING_MODE;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
-7401;0x1ce9;MODE_INFO;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
-7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
-7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
-7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
-7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
-7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw\src\fsfw\modes\HasModesIF.h
-7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
-7506;0x1d52;HEALTH_INFO;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
-7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
-7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
-7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
-7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
-7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
-7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
-7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
-7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
-7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
-7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
-7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
-8900;0x22c4;CLOCK_SET;INFO;;fsfw\src\fsfw\pus\Service9TimeManagement.h
-8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw\src\fsfw\pus\Service9TimeManagement.h
-9700;0x25e4;TEST;INFO;;fsfw\src\fsfw\pus\Service17Test.h
-10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw\hal\src\fsfw_hal\devicehandlers\MgmLIS3MDLHandler.h
-11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
-11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
-11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;;mission\devices\devicedefinitions\powerDefinitions.h
-11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;;mission\devices\HeaterHandler.h
-11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;;mission\devices\HeaterHandler.h
-11402;0x2c8a;SWITCH_ALREADY_ON;LOW;;mission\devices\HeaterHandler.h
-11403;0x2c8b;SWITCH_ALREADY_OFF;LOW;;mission\devices\HeaterHandler.h
-11404;0x2c8c;MAIN_SWITCH_TIMEOUT;LOW;;mission\devices\HeaterHandler.h
-11500;0x2cec;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
-11501;0x2ced;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
-11502;0x2cee;DEPLOYMENT_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
-11503;0x2cef;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
-11504;0x2cf0;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
-11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux\devices\ploc\PlocMPSoCHandler.h
-11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
-11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
-11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux\devices\ploc\PlocMPSoCHandler.h
-11605;0x2d55;MPSOC_HANDLER_SEQ_CNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux\devices\ploc\PlocMPSoCHandler.h
-11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux\devices\ploc\PlocMPSoCHandler.h
-11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
-11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
-11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
-11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
-11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
-11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
-11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
-11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission\devices\IMTQHandler.h
-11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission\devices\RwHandler.h
-11901;0x2e7d;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux\devices\startracker\StarTrackerHandler.h
-11902;0x2e7e;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux\devices\startracker\StarTrackerHandler.h
-12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux\devices\ploc\PlocSupervisorHandler.h
-12002;0x2ee2;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux\devices\ploc\PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report;linux\devices\ploc\PlocSupervisorHandler.h
-12004;0x2ee4;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux\devices\ploc\PlocSupervisorHandler.h
-12005;0x2ee5;SUPV_MPSOC_SHUWDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux\devices\ploc\PlocSupervisorHandler.h
-12100;0x2f44;SANITIZATION_FAILED;LOW;;bsp_q7s\memory\SdCardManager.h
-12101;0x2f45;MOUNTED_SD_CARD;INFO;;bsp_q7s\memory\SdCardManager.h
-12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux\devices\ploc\PlocMemoryDumper.h
-12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux\devices\ploc\PlocMemoryDumper.h
-12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux\devices\ploc\PlocMemoryDumper.h
-12401;0x3071;INVALID_TC_FRAME;HIGH;;linux\obc\PdecHandler.h
-12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux\obc\PdecHandler.h
-12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux\obc\PdecHandler.h
-12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux\obc\PdecHandler.h
-12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux\devices\startracker\StrHelper.h
-12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux\devices\startracker\StrHelper.h
-12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux\devices\startracker\StrHelper.h
-12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux\devices\startracker\StrHelper.h
-12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux\devices\startracker\StrHelper.h
-12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux\devices\startracker\StrHelper.h
-12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux\devices\startracker\StrHelper.h
-12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux\devices\startracker\StrHelper.h
-12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux\devices\startracker\StrHelper.h
-12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
-12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
-12511;0x30df;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux\devices\startracker\StrHelper.h
-12512;0x30e0;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux\devices\startracker\StrHelper.h
-12513;0x30e1;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux\devices\startracker\StrHelper.h
-12514;0x30e2;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux\devices\startracker\StrHelper.h
-12515;0x30e3;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux\devices\startracker\StrHelper.h
-12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux\devices\startracker\StrHelper.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux\devices\ploc\PlocMPSoCHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux\devices\ploc\PlocMPSoCHelper.h
-12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;;linux\devices\ploc\PlocMPSoCHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
-12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
-12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
-12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
-12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
-12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
-12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux\devices\ploc\PlocMPSoCHelper.h
-12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission\devices\PayloadPcduHandler.h
-12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
-12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\AcsBoardAssembly.h
-12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\AcsBoardAssembly.h
-12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\AcsBoardAssembly.h
-12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\AcsBoardAssembly.h
-12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\SusAssembly.h
-12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\SusAssembly.h
-12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\SusAssembly.h
-12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\SusAssembly.h
-13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;;mission\system\TcsBoardAssembly.h
-13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission\devices\devicedefinitions\GPSDefinitions.h
-13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission\devices\P60DockHandler.h
-13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission\devices\P60DockHandler.h
-13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission\devices\P60DockHandler.h
-13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux\devices\ploc\PlocSupvHelper.h
-13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux\devices\ploc\PlocSupvHelper.h
-13602;0x3522;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux\devices\ploc\PlocSupvHelper.h
-13603;0x3523;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux\devices\ploc\PlocSupvHelper.h
-13604;0x3524;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux\devices\ploc\PlocSupvHelper.h
-13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux\devices\ploc\PlocSupvHelper.h
-13606;0x3526;SUPV_SENDING_COMMAND_FAILED;LOW;;linux\devices\ploc\PlocSupvHelper.h
-13607;0x3527;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
-13608;0x3528;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
-13609;0x3529;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocSupvHelper.h
-13610;0x352a;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
-13611;0x352b;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
-13612;0x352c;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux\devices\ploc\PlocSupvHelper.h
-13613;0x352d;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
-13614;0x352e;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
-13615;0x352f;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux\devices\ploc\PlocSupvHelper.h
-13616;0x3530;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux\devices\ploc\PlocSupvHelper.h
-13700;0x3584;ALLOC_FAILURE;MEDIUM;;bsp_q7s\core\CoreController.h
-13701;0x3585;REBOOT_SW;MEDIUM; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s\core\CoreController.h
-13702;0x3586;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s\core\CoreController.h
-13703;0x3587;REBOOT_HW;MEDIUM;;bsp_q7s\core\CoreController.h
+2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2203;0x089b;STORE_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2205;0x089d;STORING_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2211;0x08a3;INIT_DONE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2212;0x08a4;DUMP_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2213;0x08a5;DELETION_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2214;0x08a6;DELETION_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
+2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
+2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
+2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
+4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw/src/fsfw/power/Fuse.h
+4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw/src/fsfw/power/Fuse.h
+4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
+4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
+4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw/src/fsfw/power/PowerSwitchIF.h
+5000;0x1388;HEATER_ON;INFO;;fsfw/src/fsfw/thermal/Heater.h
+5001;0x1389;HEATER_OFF;INFO;;fsfw/src/fsfw/thermal/Heater.h
+5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw/src/fsfw/thermal/Heater.h
+5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw/src/fsfw/thermal/Heater.h
+5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw/src/fsfw/thermal/Heater.h
+5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
+5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
+5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
+5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
+5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
+5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
+5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
+5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
+7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
+7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
+7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
+7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
+7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
+7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
+7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
+7400;0x1ce8;CHANGING_MODE;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
+7401;0x1ce9;MODE_INFO;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
+7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
+7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
+7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
+7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
+7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw/src/fsfw/modes/HasModesIF.h
+7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
+7506;0x1d52;HEALTH_INFO;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
+7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
+7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
+7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
+7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
+7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
+7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
+7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
+7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
+7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
+7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
+7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
+8900;0x22c4;CLOCK_SET;INFO;;fsfw/src/fsfw/pus/Service9TimeManagement.h
+8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw/src/fsfw/pus/Service9TimeManagement.h
+9700;0x25e4;TEST;INFO;;fsfw/src/fsfw/pus/Service17Test.h
+10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw/hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
+11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
+11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
+11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
+11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
+11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;;mission/devices/HeaterHandler.h
+11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;;mission/devices/HeaterHandler.h
+11402;0x2c8a;HEATER_WENT_ON;INFO;;mission/devices/HeaterHandler.h
+11403;0x2c8b;HEATER_WENT_OFF;INFO;;mission/devices/HeaterHandler.h
+11404;0x2c8c;SWITCH_ALREADY_ON;LOW;;mission/devices/HeaterHandler.h
+11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;;mission/devices/HeaterHandler.h
+11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;;mission/devices/HeaterHandler.h
+11500;0x2cec;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
+11501;0x2ced;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
+11502;0x2cee;DEPLOYMENT_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
+11503;0x2cef;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
+11504;0x2cf0;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
+11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/devices/ploc/PlocMPSoCHandler.h
+11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
+11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
+11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
+11605;0x2d55;MPSOC_HANDLER_SEQ_CNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
+11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/devices/ploc/PlocMPSoCHandler.h
+11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
+11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
+11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
+11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
+11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
+11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
+11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
+11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/IMTQHandler.h
+11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/RwHandler.h
+11901;0x2e7d;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
+11902;0x2e7e;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
+12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
+12002;0x2ee2;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
+12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report;linux/devices/ploc/PlocSupervisorHandler.h
+12004;0x2ee4;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
+12100;0x2f44;SANITIZATION_FAILED;LOW;;bsp_q7s/memory/SdCardManager.h
+12101;0x2f45;MOUNTED_SD_CARD;INFO;;bsp_q7s/memory/SdCardManager.h
+12200;0x2fa8;UPDATE_FILE_NOT_EXISTS;LOW;;linux/devices/ploc/PlocUpdater.h
+12201;0x2fa9;ACTION_COMMANDING_FAILED;LOW;Failed to send command to supervisor handler P1: Return value of CommandActionHelper::commandAction P2: Action ID of command to send;linux/devices/ploc/PlocUpdater.h
+12202;0x2faa;UPDATE_AVAILABLE_FAILED;LOW;Supervisor handler replied action message indicating a command execution failure of the update available command;linux/devices/ploc/PlocUpdater.h
+12203;0x2fab;UPDATE_TRANSFER_FAILED;LOW;Supervisor handler failed to transfer an update space packet. P1: Parameter holds the number of update packets already sent (inclusive the failed packet);linux/devices/ploc/PlocUpdater.h
+12204;0x2fac;UPDATE_VERIFY_FAILED;LOW;Supervisor failed to execute the update verify command.;linux/devices/ploc/PlocUpdater.h
+12205;0x2fad;UPDATE_FINISHED;INFO;MPSoC update successful completed;linux/devices/ploc/PlocUpdater.h
+12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
+12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
+12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
+12401;0x3071;INVALID_TC_FRAME;HIGH;;linux/obc/PdecHandler.h
+12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/obc/PdecHandler.h
+12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux/obc/PdecHandler.h
+12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux/obc/PdecHandler.h
+12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrHelper.h
+12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrHelper.h
+12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrHelper.h
+12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrHelper.h
+12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrHelper.h
+12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrHelper.h
+12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrHelper.h
+12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrHelper.h
+12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrHelper.h
+12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
+12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
+12511;0x30df;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux/devices/startracker/StrHelper.h
+12512;0x30e0;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrHelper.h
+12513;0x30e1;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrHelper.h
+12514;0x30e2;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrHelper.h
+12515;0x30e3;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux/devices/startracker/StrHelper.h
+12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux/devices/startracker/StrHelper.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
+12602;0x313a;SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocMPSoCHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12605;0x313d;MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12606;0x313e;MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
+12607;0x313f;ACK_FAILURE_REPORT;LOW;Received acknowledgement failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12608;0x3140;EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12609;0x3141;ACK_INVALID_APID;LOW;Expected acknowledgement report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12610;0x3142;EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
+12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
+12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
+12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/AcsBoardAssembly.h
+12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/AcsBoardAssembly.h
+12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/AcsBoardAssembly.h
+12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/AcsBoardAssembly.h
+12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/SusAssembly.h
+12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/SusAssembly.h
+12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/SusAssembly.h
+12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/SusAssembly.h
+13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;;mission/system/TcsBoardAssembly.h
+13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/devices/devicedefinitions/GPSDefinitions.h
+13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/devices/P60DockHandler.h
+13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/devices/P60DockHandler.h
+13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/devices/P60DockHandler.h
+13600;0x3520;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
+13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
+13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
+13603;0x3523;REBOOT_HW;MEDIUM;;bsp_q7s/core/CoreController.h
--- a/config/hook_implementations.py
+++ b/config/hook_implementations.py
@@ -9,10 +9,9 @@ from tmtccmd.pus.obj_id import ObjectIdDictT
 from tmtccmd.com_if.com_interface_base import CommunicationInterface
 from tmtccmd.core.backend import TmTcHandler
 from tmtccmd.config.hook import TmTcHookBase
-from tmtccmd.config.globals import OpCodeDictKeys

-from config.definitions import CustomServiceList
 from config.retvals import get_retval_dict
+from pus_tc.cmd_definitions import get_eive_service_op_code_dict


 class EiveHookObject(TmTcHookBase):
@@ -56,292 +55,3 @@ class EiveHookObject(TmTcHookBase):

    def get_retval_dict(self) -> RetvalDictT:
        return get_retval_dict()
-
-
-def get_eive_service_op_code_dict(service_op_code_dict: ServiceOpCodeDictT):
-    from pus_tc.cmd_definitions import (
-        add_bpx_cmd_definitions,
-        add_core_controller_definitions,
-        add_pcdu_cmds,
-        add_pl_pcdu_cmds,
-        add_imtq_cmds,
-        add_rw_cmds,
-        add_rad_sens_cmds,
-        add_ploc_mpsoc_cmds,
-        add_ploc_supv_cmds,
-        add_system_cmds,
-        add_time_cmds,
-    )
-    from pus_tc.devs.gps import GpsOpCodes
-
-    add_bpx_cmd_definitions(cmd_dict=service_op_code_dict)
-    add_core_controller_definitions(cmd_dict=service_op_code_dict)
-    add_pl_pcdu_cmds(cmd_dict=service_op_code_dict)
-    add_pcdu_cmds(cmd_dict=service_op_code_dict)
-    add_imtq_cmds(cmd_dict=service_op_code_dict)
-    add_rad_sens_cmds(cmd_dict=service_op_code_dict)
-    add_rw_cmds(cmd_dict=service_op_code_dict)
-    add_ploc_mpsoc_cmds(cmd_dict=service_op_code_dict)
-    add_ploc_supv_cmds(cmd_dict=service_op_code_dict)
-    add_system_cmds(cmd_dict=service_op_code_dict)
-    add_time_cmds(cmd_dict=service_op_code_dict)
-
-    op_code_dict = {
-        GpsOpCodes.RESET_GNSS.value: ("Reset GPS", {OpCodeDictKeys.TIMEOUT: 2.0})
-    }
-    service_tuple = ("GPS 0", op_code_dict)
-    service_op_code_dict[CustomServiceList.GPS_0.value] = service_tuple
-    service_op_code_dict[CustomServiceList.GPS_1.value] = service_tuple
-
-    op_code_dict = {
-        "0": ("ACU: Tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "51": ("ACU: Print channel statistics", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_tuple = ("ACU Devices", op_code_dict)
-    service_op_code_dict[CustomServiceList.ACU.value] = service_tuple
-
-    op_code_dict = {
-        "0": ("TMP1075 Tests", {OpCodeDictKeys.TIMEOUT: 2.2}),
-    }
-    service_tuple = ("TMP1075 1", op_code_dict)
-    service_op_code_dict[CustomServiceList.TMP1075_1.value] = service_tuple
-    service_tuple = ("TMP1075 2", op_code_dict)
-    service_op_code_dict[CustomServiceList.TMP1075_2.value] = service_tuple
-
-    op_code_dict_srv_heater = {
-        "0": ("Heater Tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_heater_tuple = ("Heater Device", op_code_dict_srv_heater)
-
-    op_code_dict_srv_star_tracker = {
-        "0": (
-            "Star Tracker: Mode On, Submode Bootloader",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "1": ("Star Tracker: Mode On, Submode Firmware", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("Star Tracker: Mode Normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("Star Tracker: Mode Off", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("Star Tracker: Mode Raw", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": ("Star Tracker: Ping", {OpCodeDictKeys.TIMEOUT: 5.0}),
-        "6": (
-            "Star Tracker: Switch to bootloader program",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "7": ("Star Tracker: Request temperature", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "8": ("Star Tracker: Request version", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "9": ("Star Tracker: Request interface", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "10": ("Star Tracker: Request power", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "11": (
-            "Star Tracker: Set subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "12": (
-            "Star Tracker: Boot image (requires bootloader mode)",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "13": ("Star Tracker: Request time", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "14": ("Star Tracker: Request solution", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "15": ("Star Tracker: Upload image", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "16": ("Star Tracker: Download image", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "17": ("Star Tracker: Set limit parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "18": ("Star Tracker: Set tracking parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "19": ("Star Tracker: Set mounting parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "20": ("Star Tracker: Set camera parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "22": (
-            "Star Tracker: Set centroiding parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "23": ("Star Tracker: Set LISA parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "24": ("Star Tracker: Set matching parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "25": (
-            "Star Tracker: Set validation parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "26": ("Star Tracker: Set algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "27": ("Star Tracker: Take image", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "28": ("Star Tracker: Stop str helper", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "30": (
-            "Star Tracker: Set name of download image",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "31": ("Star Tracker: Request histogram", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "32": ("Star Tracker: Request contrast", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "33": ("Star Tracker: Set json filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "35": ("Star Tracker: Flash read", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "36": ("Star Tracker: Set flash read filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "37": ("Star Tracker: Get checksum", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "49": ("Star Tracker: Request camera parameter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "50": ("Star Tracker: Request limits", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "51": (
-            "Star Tracker: Set image processor parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "52": (
-            "Star Tracker: (EGSE only) Load camera ground config ",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "53": (
-            "Star Tracker: (EGSE only) Load camera flight config",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "54": (
-            "Star Tracker: Request log level parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "55": (
-            "Star Tracker: Request mounting parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "56": (
-            "Star Tracker: Request image processor parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "57": (
-            "Star Tracker: Request centroiding parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "58": ("Star Tracker: Request lisa parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "59": (
-            "Star Tracker: Request matching parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "60": (
-            "Star Tracker: Request tracking parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "61": (
-            "Star Tracker: Request validation parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "62": ("Star Tracker: Request algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "63": (
-            "Star Tracker: Request subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "64": (
-            "Star Tracker: Request log subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "65": (
-            "Star Tracker: Request debug camera parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "66": ("Star Tracker: Set log level parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "67": (
-            "Star Tracker: Set log subscription parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "68": (
-            "Star Tracker: Set debug camera parameters",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "69": ("Star Tracker: Firmware update", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "70": (
-            "Star Tracker: Disable timestamp generation",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "71": (
-            "Star Tracker: Enable timestamp generation",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
-    service_star_tracker_tuple = ("Star tracker", op_code_dict_srv_star_tracker)
-
-    op_code_dict_srv_ccsds_handler = {
-        "0": ("CCSDS Handler: Set low rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("CCSDS Handler: Set high rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("CCSDS Handler: Enable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("CCSDS Handler: Disable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("CCSDS Handler: Set arbitrary bitrate", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": (
-            "CCSDS Handler: Enable tx clock manipulator",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "6": (
-            "CCSDS Handler: Disable tx clock manipulator",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "7": (
-            "CCSDS Handler: Update tx data on rising edge",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "8": (
-            "CCSDS Handler: Update tx data on falling edge",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
-    service_ccsds_handler_tuple = ("CCSDS Handler", op_code_dict_srv_ccsds_handler)
-
-    op_code_dict_srv_pdec_handler = {
-        "0": ("PDEC Handler: Print CLCW", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("PDEC Handler: Print PDEC monitor", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_pdec_handler_tuple = ("PDEC Handler", op_code_dict_srv_pdec_handler)
-
-    op_code_dict_srv_syrlinks_handler = {
-        "0": ("Syrlinks Handler: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("Syrlinks Handler: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("Syrlinks Handler: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("Syrlinks Handler: Set TX standby", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("Syrlinks Handler: Set TX modulation", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": ("Syrlinks Handler: Set TX carrier wave", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "6": ("Syrlinks Handler: Read TX status", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "7": ("Syrlinks Handler: Read TX waveform", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "8": (
-            "Syrlinks Handler: Read TX AGC value high byte ",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "9": (
-            "Syrlinks Handler: Read TX AGC value low byte ",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "12": (
-            "Syrlinks Handler: Write LCL config",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "13": (
-            "Syrlinks Handler: Read RX status registers",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "14": (
-            "Syrlinks Handler: Read LCL config register",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "15": (
-            "Syrlinks Handler: Set waveform OQPSK",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "16": (
-            "Syrlinks Handler: Set waveform BPSK",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "17": (
-            "Syrlinks Handler: Set second config",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "18": (
-            "Syrlinks Handler: Enable debug output",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "19": (
-            "Syrlinks Handler: Disable debug output",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
-    service_syrlinks_handler_tuple = (
-        "Syrlinks Handler",
-        op_code_dict_srv_syrlinks_handler,
-    )
-    service_op_code_dict[CustomServiceList.HEATER.value] = service_heater_tuple
-    service_op_code_dict[
-        CustomServiceList.STAR_TRACKER.value
-    ] = service_star_tracker_tuple
-    service_op_code_dict[
-        CustomServiceList.CCSDS_HANDLER.value
-    ] = service_ccsds_handler_tuple
-    service_op_code_dict[
-        CustomServiceList.PDEC_HANDLER.value
-    ] = service_pdec_handler_tuple
-    service_op_code_dict[
-        CustomServiceList.SYRLINKS.value
-    ] = service_syrlinks_handler_tuple
--- a/config/object_ids.py
+++ b/config/object_ids.py
@@ -67,6 +67,16 @@ STR_IMG_HELPER_ID = bytes([0x44, 0x33, 0x00, 0x02])
 PLOC_MPSOC_ID = bytes([0x44, 0x33, 0x00, 0x15])
 PL_PCDU_ID = bytes([0x44, 0x30, 0x00, 0x00])

+# Other
+HEATER_0_OBC_BRD = bytes([0x60, 0x00, 0x00, 0x00])
+HEATER_1_PLOC_PROC_BRD = bytes([0x60, 0x00, 0x00, 0x01])
+HEATER_2_ACS_BRD = bytes([0x60, 0x00, 0x00, 0x02])
+HEATER_3_PCDU_BRD = bytes([0x60, 0x00, 0x00, 0x03])
+HEATER_4_CAMERA = bytes([0x60, 0x00, 0x00, 0x04])
+HEATER_5_STR = bytes([0x60, 0x00, 0x00, 0x05])
+HEATER_6_DRO = bytes([0x60, 0x00, 0x00, 0x06])
+HEATER_7_HPA = bytes([0x60, 0x00, 0x00, 0x07])
+
 # System and Assembly Objects
 ACS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x01])
 SUS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x02])
--- a/config/objects.csv
+++ b/config/objects.csv
@@ -37,6 +37,7 @@
 0x44260000;BPX_BATT_HANDLER
 0x44300000;PLPCDU_HANDLER
 0x443200A5;RAD_SENSOR
+0x44330000;PLOC_UPDATER
 0x44330001;PLOC_MEMORY_DUMPER
 0x44330002;STR_HELPER
 0x44330003;PLOC_MPSOC_HELPER
@@ -108,6 +109,14 @@
 0x5400CAFE;DUMMY_INTERFACE
 0x54123456;LIBGPIOD_TEST
 0x54694269;TEST_TASK
+0x60000000;HEATER_0
+0x60000001;HEATER_1
+0x60000002;HEATER_2
+0x60000003;HEATER_3
+0x60000004;HEATER_4
+0x60000005;HEATER_5
+0x60000006;HEATER_6
+0x60000007;HEATER_7
 0x73000001;ACS_BOARD_ASS
 0x73000002;SUS_BOARD_ASS
 0x73000003;TCS_BOARD_ASS
--- a/config/returnvalues.csv
+++ b/config/returnvalues.csv
--- a/pus_tc/cmd_definitions.py
+++ b/pus_tc/cmd_definitions.py
@@ -1,3 +1,4 @@
+from pus_tc.devs.gps import GpsOpCodes
 from tmtccmd.config import (
    add_op_code_entry,
    add_service_op_code_entry,
@@ -6,9 +7,282 @@ from tmtccmd.config import (
    OpCodeDictKeys,
 )
 from config.definitions import CustomServiceList
+from pus_tc.devs.heater import add_heater_cmds
 from pus_tc.devs.bpx_batt import BpxOpCodes


+def get_eive_service_op_code_dict(service_op_code_dict: ServiceOpCodeDictT):
+    add_bpx_cmd_definitions(cmd_dict=service_op_code_dict)
+    add_core_controller_definitions(cmd_dict=service_op_code_dict)
+    add_pl_pcdu_cmds(cmd_dict=service_op_code_dict)
+    add_pcdu_cmds(cmd_dict=service_op_code_dict)
+    add_imtq_cmds(cmd_dict=service_op_code_dict)
+    add_rad_sens_cmds(cmd_dict=service_op_code_dict)
+    add_rw_cmds(cmd_dict=service_op_code_dict)
+    add_ploc_mpsoc_cmds(cmd_dict=service_op_code_dict)
+    add_ploc_supv_cmds(cmd_dict=service_op_code_dict)
+    add_system_cmds(cmd_dict=service_op_code_dict)
+    add_time_cmds(cmd_dict=service_op_code_dict)
+    add_syrlinks_cmds(cmd_dict=service_op_code_dict)
+    add_gps_cmds(cmd_dict=service_op_code_dict)
+    add_str_cmds(cmd_dict=service_op_code_dict)
+    add_ccsds_cmds(cmd_dict=service_op_code_dict)
+    add_pdec_cmds(cmd_dict=service_op_code_dict)
+    add_heater_cmds(cmd_dict=service_op_code_dict)
+    add_tmp_sens_cmds(cmd_dict=service_op_code_dict)
+
+
+def add_tmp_sens_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = {
+        "0": ("TMP1075 Tests", {OpCodeDictKeys.TIMEOUT: 2.2}),
+    }
+    service_tuple = ("TMP1075 1", op_code_dict)
+    cmd_dict[CustomServiceList.TMP1075_1.value] = service_tuple
+    service_tuple = ("TMP1075 2", op_code_dict)
+    cmd_dict[CustomServiceList.TMP1075_2.value] = service_tuple
+
+
+def add_pdec_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_pdec_handler = {
+        "0": ("PDEC Handler: Print CLCW", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "1": ("PDEC Handler: Print PDEC monitor", {OpCodeDictKeys.TIMEOUT: 2.0}),
+    }
+    service_pdec_handler_tuple = ("PDEC Handler", op_code_dict_srv_pdec_handler)
+    cmd_dict[CustomServiceList.PDEC_HANDLER.value] = service_pdec_handler_tuple
+
+
+def add_ccsds_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_ccsds_handler = {
+        "0": ("CCSDS Handler: Set low rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "1": ("CCSDS Handler: Set high rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "2": ("CCSDS Handler: Enable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "3": ("CCSDS Handler: Disable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "4": ("CCSDS Handler: Set arbitrary bitrate", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "5": (
+            "CCSDS Handler: Enable tx clock manipulator",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "6": (
+            "CCSDS Handler: Disable tx clock manipulator",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "7": (
+            "CCSDS Handler: Update tx data on rising edge",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "8": (
+            "CCSDS Handler: Update tx data on falling edge",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+    }
+    service_ccsds_handler_tuple = ("CCSDS Handler", op_code_dict_srv_ccsds_handler)
+    cmd_dict[CustomServiceList.CCSDS_HANDLER.value] = service_ccsds_handler_tuple
+
+
+def add_gps_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = {
+        GpsOpCodes.RESET_GNSS.value: ("Reset GPS", {OpCodeDictKeys.TIMEOUT: 2.0})
+    }
+    service_tuple = ("GPS 0", op_code_dict)
+    cmd_dict[CustomServiceList.GPS_0.value] = service_tuple
+    cmd_dict[CustomServiceList.GPS_1.value] = service_tuple
+
+
+def add_str_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_star_tracker = {
+        "0": (
+            "Star Tracker: Mode On, Submode Bootloader",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "1": ("Star Tracker: Mode On, Submode Firmware", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "2": ("Star Tracker: Mode Normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "3": ("Star Tracker: Mode Off", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "4": ("Star Tracker: Mode Raw", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "5": ("Star Tracker: Ping", {OpCodeDictKeys.TIMEOUT: 5.0}),
+        "6": (
+            "Star Tracker: Switch to bootloader program",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "7": ("Star Tracker: Request temperature", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "8": ("Star Tracker: Request version", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "9": ("Star Tracker: Request interface", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "10": ("Star Tracker: Request power", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "11": (
+            "Star Tracker: Set subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "12": (
+            "Star Tracker: Boot image (requires bootloader mode)",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "13": ("Star Tracker: Request time", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "14": ("Star Tracker: Request solution", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "15": ("Star Tracker: Upload image", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "16": ("Star Tracker: Download image", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "17": ("Star Tracker: Set limit parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "18": ("Star Tracker: Set tracking parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "19": ("Star Tracker: Set mounting parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "20": ("Star Tracker: Set camera parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "22": (
+            "Star Tracker: Set centroiding parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "23": ("Star Tracker: Set LISA parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "24": ("Star Tracker: Set matching parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "25": (
+            "Star Tracker: Set validation parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "26": ("Star Tracker: Set algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "27": ("Star Tracker: Take image", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "28": ("Star Tracker: Stop str helper", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "30": (
+            "Star Tracker: Set name of download image",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "31": ("Star Tracker: Request histogram", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "32": ("Star Tracker: Request contrast", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "33": ("Star Tracker: Set json filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "35": ("Star Tracker: Flash read", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "36": ("Star Tracker: Set flash read filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "37": ("Star Tracker: Get checksum", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "49": ("Star Tracker: Request camera parameter", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "50": ("Star Tracker: Request limits", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "51": (
+            "Star Tracker: Set image processor parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "52": (
+            "Star Tracker: (EGSE only) Load camera ground config ",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "53": (
+            "Star Tracker: (EGSE only) Load camera flight config",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "54": (
+            "Star Tracker: Request log level parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "55": (
+            "Star Tracker: Request mounting parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "56": (
+            "Star Tracker: Request image processor parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "57": (
+            "Star Tracker: Request centroiding parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "58": ("Star Tracker: Request lisa parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "59": (
+            "Star Tracker: Request matching parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "60": (
+            "Star Tracker: Request tracking parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "61": (
+            "Star Tracker: Request validation parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "62": ("Star Tracker: Request algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "63": (
+            "Star Tracker: Request subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "64": (
+            "Star Tracker: Request log subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "65": (
+            "Star Tracker: Request debug camera parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "66": ("Star Tracker: Set log level parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "67": (
+            "Star Tracker: Set log subscription parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "68": (
+            "Star Tracker: Set debug camera parameters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "69": ("Star Tracker: Firmware update", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "70": (
+            "Star Tracker: Disable timestamp generation",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "71": (
+            "Star Tracker: Enable timestamp generation",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+    }
+    service_star_tracker_tuple = ("Star tracker", op_code_dict_srv_star_tracker)
+    cmd_dict[CustomServiceList.STAR_TRACKER.value] = service_star_tracker_tuple
+
+
+def add_syrlinks_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict_srv_syrlinks_handler = {
+        "0": ("Syrlinks Handler: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "1": ("Syrlinks Handler: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "2": ("Syrlinks Handler: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "3": ("Syrlinks Handler: Set TX standby", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "4": ("Syrlinks Handler: Set TX modulation", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "5": ("Syrlinks Handler: Set TX carrier wave", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "6": ("Syrlinks Handler: Read TX status", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "7": ("Syrlinks Handler: Read TX waveform", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "8": (
+            "Syrlinks Handler: Read TX AGC value high byte ",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "9": (
+            "Syrlinks Handler: Read TX AGC value low byte ",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "12": (
+            "Syrlinks Handler: Write LCL config",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "13": (
+            "Syrlinks Handler: Read RX status registers",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "14": (
+            "Syrlinks Handler: Read LCL config register",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "15": (
+            "Syrlinks Handler: Set waveform OQPSK",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "16": (
+            "Syrlinks Handler: Set waveform BPSK",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "17": (
+            "Syrlinks Handler: Set second config",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "18": (
+            "Syrlinks Handler: Enable debug output",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "19": (
+            "Syrlinks Handler: Disable debug output",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+    }
+    service_syrlinks_handler_tuple = (
+        "Syrlinks Handler",
+        op_code_dict_srv_syrlinks_handler,
+    )
+    cmd_dict[CustomServiceList.SYRLINKS.value] = service_syrlinks_handler_tuple
+
+
 def add_bpx_cmd_definitions(cmd_dict: ServiceOpCodeDictT):
    op_code_dict = dict()
    add_op_code_entry(
@@ -471,6 +745,12 @@ def add_pcdu_cmds(cmd_dict: ServiceOpCodeDictT):
        info="PDU2 Device",
        op_code_entry=op_code_dict,
    )
+    op_code_dict = {
+        "0": ("ACU: Tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "51": ("ACU: Print channel statistics", {OpCodeDictKeys.TIMEOUT: 2.0}),
+    }
+    service_tuple = ("ACU Devices", op_code_dict)
+    cmd_dict[CustomServiceList.ACU.value] = service_tuple


 def add_imtq_cmds(cmd_dict: ServiceOpCodeDictT):
@@ -560,7 +840,6 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
        "1": ("PLOC Supervisor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "2": ("PLOC Supervisor: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "3": ("PLOC Supervisor: Get HK Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("PLOC Supervisor: Restart MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "5": ("PLOC Supervisor: Start MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "6": ("PLOC Supervisor: Shutdown MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "7": (
@@ -576,18 +855,9 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
            "PLOC Supervisor: Request boot status report",
            {OpCodeDictKeys.TIMEOUT: 2.0},
        ),
-        "14": ("PLOC Supervisor: Update available", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "15": ("PLOC Supervisor: Watchdogs enable", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "16": (
-            "PLOC Supervisor: Watchdog Configure Timeout",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
        "17": ("PLOC Supervisor: Enable latchup alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "18": ("PLOC Supervisor: Disable latchup alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "19": ("PLOC Supervisor: Auto calibrate alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "20": ("PLOC Supervisor: Set alert limit", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "21": ("PLOC Supervisor: Set alert irq filter", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "22": ("PLOC Supervisor: Set ADC sweep period", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "23": (
            "PLOC Supervisor: Set ADC enabled channels",
            {OpCodeDictKeys.TIMEOUT: 2.0},
@@ -604,8 +874,6 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
        "27": ("PLOC Supervisor: Copy ADC data to MRAM", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "30": ("PLOC Supervisor: Run auto EM tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "31": ("PLOC Supervisor: MRAM Wipe", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "33": ("PLOC Supervisor: Print CPU stats", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "34": ("PLOC Supervisor: Set debug verbosity", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "35": ("PLOC Supervisor: Set GPIO", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "36": ("PLOC Supervisor: Read GPIO", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "37": ("PLOC Supervisor: Restart supervisor", {OpCodeDictKeys.TIMEOUT: 2.0}),
@@ -622,18 +890,28 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
            {OpCodeDictKeys.TIMEOUT: 2.0},
        ),
        "42": ("PLOC Supervisor: Perform update", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "43": ("PLOC Supervisor: Terminate supervisor process", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "43": (
+            "PLOC Supervisor: Terminate supervisor process",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
        "44": ("PLOC Supervisor: Start MPSoC quiet", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "45": ("PLOC Supervisor: Set shutdown timeout", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "46": ("PLOC Supervisor: Factory flash", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "47": ("PLOC Supervisor: Enable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "48": ("PLOC Supervisor: Disable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "49": ("PLOC Supervisor: Enable ADC monitor task", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "50": ("PLOC Supervisor: Disable ADC monitor task", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "51": ("PLOC Supervisor: Logging request event buffers", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "52": ("PLOC Supervisor: Logging clear counters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "51": (
+            "PLOC Supervisor: Logging request event buffers",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
+        "52": (
+            "PLOC Supervisor: Logging clear counters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
        "53": ("PLOC Supervisor: Logging set topic", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "54": ("PLOC Supervisor: Logging request counters", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "54": (
+            "PLOC Supervisor: Logging request counters",
+            {OpCodeDictKeys.TIMEOUT: 2.0},
+        ),
        "55": ("PLOC Supervisor: Request ADC Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "56": ("PLOC Supervisor: Reset PL", {OpCodeDictKeys.TIMEOUT: 2.0}),
    }
--- a/pus_tc/devs/heater.py
+++ b/pus_tc/devs/heater.py
@@ -1,59 +1,207 @@
 # -*- coding: utf-8 -*-
-"""
-@file   tmtcc_tc_heater.py
-@brief  Command sequence to test the HeaterHandler
+"""Command sequence to test the HeaterHandler
@author J. Meier
@date   30.01.2021
 """
-from tmtccmd.config.definitions import QueueCommands
+import enum
+
+from config.definitions import CustomServiceList
+from config.object_ids import get_object_ids
+from tmtccmd.pus.obj_id import ObjectIdDictT, ObjectId
+from tmtccmd.config.definitions import QueueCommands, ServiceOpCodeDictT
+from tmtccmd.tc.pus_201_fsfw_health import pack_set_health_cmd_data, FsfwHealth, Subservices
+from tmtccmd.tc.service_8_functional_cmd import generate_action_command
+from tmtccmd.config.globals import add_service_op_code_entry, add_op_code_entry
 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand


 class SwitchNumbers:
-    HEATER_0 = 0
-    HEATER_1 = 1
-    HEATER_2 = 2
-    HEATER_3 = 3
-    HEATER_4 = 4
-    HEATER_5 = 5
-    HEATER_6 = 6
-    HEATER_7 = 7
+    HEATER_0_OBC_BRD = 0
+    HEATER_1_PLOC_PROC_BRD = 1
+    HEATER_2_ACS_BRD = 2
+    HEATER_3_PCDU_PDU = 3
+    HEATER_4_CAMERA = 4
+    HEATER_5_STR = 5
+    HEATER_6_DRO = 6
+    HEATER_7_HPA = 7
    NUMBER_OF_SWITCHES = 8


-class ActionIds:
-    SWITCH_HEATER = bytearray([0x0, 0x0, 0x0, 0x0])
+class OpCodes:
+    HEATER_CMD = ["0", "switch-cmd"]
+    HEATER_EXT_CTRL = ["1", "set-ext-ctrl"]
+    HEATER_FAULTY_CMD = ["2", "set-faulty"]
+    HEATER_HEALTHY_CMD = ["3", "set-healthy"]


-def pack_heater_test_into(object_id: bytearray, tc_queue: TcQueueT):
-    tc_queue.appendleft((QueueCommands.PRINT, "Testing Heater Switching"))
+class Info:
+    HEATER_CMD = "Heater Switch Command"
+    HEATER_EXT_CTRL = "Set to external control"
+    HEATER_FAULTY_CMD = "Set to faulty"
+    HEATER_HEALTHY_CMD = "Set to healthy"

-    heater_number = int(input("Type number of heater to switch [0-7]: "))
-    if heater_number >= SwitchNumbers.NUMBER_OF_SWITCHES or heater_number < 0:
-        print("Invalid heater switch number")
-        return
-    action = int(input("Turn switch on or off? (0 - off, 1 - on): "))
-    if action != 0 and action != 1:
-        print("Invalid action defined. Must be 0 (off) or 1 (on")
-    debug_string = "Switching heater " + str(heater_number)
-    tc_queue.appendleft((QueueCommands.PRINT, debug_string))
-    command = pack_switch_heater_command(object_id, heater_number, action)
-    command = PusTelecommand(service=8, subservice=128, ssc=300, app_data=command)
-    tc_queue.appendleft(command.pack_command_tuple())
+
+class ActionIds(enum.IntEnum):
+    SWITCH_HEATER = 0
+
+
+def add_heater_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = dict()
+    add_op_code_entry(
+        op_code_dict=op_code_dict, keys=OpCodes.HEATER_CMD, info=Info.HEATER_CMD
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.HEATER_HEALTHY_CMD,
+        info=Info.HEATER_HEALTHY_CMD,
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.HEATER_EXT_CTRL,
+        info=Info.HEATER_EXT_CTRL,
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.HEATER_FAULTY_CMD,
+        info=Info.HEATER_FAULTY_CMD,
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.HEATER.value,
+        info="Heater Device",
+        op_code_entry=op_code_dict,
+    )
+
+
+def pack_heater_cmds(object_id: bytearray, op_code: str, tc_queue: TcQueueT):
+    if op_code in OpCodes.HEATER_CMD:
+        tc_queue.appendleft((QueueCommands.PRINT, "Heater Switching"))
+        heater_number = prompt_heater()
+        while True:
+            action = input("Turn switch on or off? (0 - off, 1 - on): ")
+            if not action.isdigit():
+                print("Switch action not valid")
+                continue
+            action = int(action)
+            if action != 0 and action != 1:
+                print("Invalid action defined. Must be 0 (off) or 1 (on")
+                continue
+            break
+        if action == 1:
+            act_str = "on"
+        else:
+            act_str = "off"
+        debug_string = f"Switching heater {heater_number} {act_str}"
+        tc_queue.appendleft((QueueCommands.PRINT, debug_string))
+        command = pack_switch_heater_command(object_id, heater_number, action)
+        tc_queue.appendleft(command.pack_command_tuple())
+    if op_code in OpCodes.HEATER_EXT_CTRL:
+        heater_number = prompt_heater()
+        obj_id = heater_idx_to_obj(heater_number)
+        health_cmd(
+            tc_queue=tc_queue,
+            object_id=obj_id,
+            health=FsfwHealth.EXTERNAL_CTRL,
+            health_str="External Control",
+            heater_idx=heater_number,
+        )
+    if op_code in OpCodes.HEATER_FAULTY_CMD:
+        heater_number = prompt_heater()
+        obj_id = heater_idx_to_obj(heater_number)
+        health_cmd(
+            tc_queue=tc_queue,
+            object_id=obj_id,
+            health=FsfwHealth.FAULTY,
+            health_str="Faulty",
+            heater_idx=heater_number,
+        )
+    if op_code in OpCodes.HEATER_HEALTHY_CMD:
+        heater_number = prompt_heater()
+        obj_id = heater_idx_to_obj(heater_number)
+        health_cmd(
+            tc_queue=tc_queue,
+            object_id=obj_id,
+            health=FsfwHealth.HEALTHY,
+            health_str="Healthy",
+            heater_idx=heater_number,
+        )
+
+
+def heater_idx_to_obj(heater: int) -> ObjectId:
+    from config.object_ids import (
+        HEATER_0_OBC_BRD,
+        HEATER_1_PLOC_PROC_BRD,
+        HEATER_2_ACS_BRD,
+        HEATER_3_PCDU_BRD,
+        HEATER_4_CAMERA,
+        HEATER_5_STR,
+        HEATER_6_DRO,
+        HEATER_7_HPA,
+    )
+
+    obj_id_array = [
+        HEATER_0_OBC_BRD,
+        HEATER_1_PLOC_PROC_BRD,
+        HEATER_2_ACS_BRD,
+        HEATER_3_PCDU_BRD,
+        HEATER_4_CAMERA,
+        HEATER_5_STR,
+        HEATER_6_DRO,
+        HEATER_7_HPA,
+    ]
+    obj_dict = get_object_ids()
+    obj_id_obj = obj_dict.get(obj_id_array[heater])
+    if obj_id_obj is None:
+        return ObjectId.from_bytes(obj_id_array[heater])
+    return obj_id_obj
+
+
+def prompt_heater() -> int:
+    while True:
+        heater_number = input("Type number of heater to switch [0-7]: ")
+        if not heater_number.isdigit():
+            print("Heater number not a digit")
+            continue
+        heater_number = int(heater_number)
+        if heater_number >= SwitchNumbers.NUMBER_OF_SWITCHES or heater_number < 0:
+            print("Invalid heater switch number")
+            continue
+        break
+    return heater_number
+
+
+def health_cmd(
+    tc_queue: TcQueueT,
+    heater_idx: int,
+    object_id: ObjectId,
+    health: FsfwHealth,
+    health_str: str,
+):
+    tc_queue.appendleft(
+        (
+            QueueCommands.PRINT,
+            f"Setting Heater {heater_idx} {object_id} to {health_str}",
+        )
+    )
+    app_data = pack_set_health_cmd_data(object_id=object_id.as_bytes, health=health)
+    cmd = PusTelecommand(
+        service=201, subservice=Subservices.TC_SET_HEALTH, app_data=app_data
+    )
+    tc_queue.appendleft(cmd.pack_command_tuple())


 def pack_switch_heater_command(
-    object_id: bytearray, switch_nr: int, switch_action: int
-) -> bytearray:
-    """Function to generate the command switch a heater
-    @param object_id    The object id of the HeaterHandler object.
-    @param switch_nr    The switch number identifying the heater to switch
-    @param switch_action    Action to perform. 0 - Sets switch off, 1 - Sets switch on.
+    object_id: bytes, switch_nr: int, switch_action: int
+) -> PusTelecommand:
+    """Function to generate a heater switch command.
+    :param object_id: The object id of the HeaterHandler object.
+    :param switch_nr: The switch number identifying the heater to switch
+    :param switch_action: Action to perform. 0 - Sets switch off, 1 - Sets switch on.
    """
-    action_id = ActionIds.SWITCH_HEATER
    command = bytearray()
-    command += object_id + action_id
    command.append(switch_nr)
    command.append(switch_action)
-    return command
+    return generate_action_command(
+        object_id=object_id, action_id=ActionIds.SWITCH_HEATER, app_data=command
+    )
--- a/pus_tc/devs/ploc_mpsoc.py
+++ b/pus_tc/devs/ploc_mpsoc.py
@@ -59,8 +59,9 @@ class MemAddresses(enum.IntEnum):
    DEADBEEF = 0x40000004


-class PlocReplyIds:
-    tm_mem_read_report = 6
+class PlocReplyIds(enum.IntEnum):
+    TM_MEM_READ_RPT = 6
+    TM_CAM_CMD_RPT = 19


 def pack_ploc_mpsoc_commands(
@@ -172,7 +173,11 @@ def pack_ploc_mpsoc_commands(
    elif op_code == "16":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC MPSoC: Tc cam command send"))
        cam_cmd = input("Specify cam command string: ")
-        command = object_id + struct.pack("!I", CommandIds.TC_CAM_CMD_SEND) + bytearray(cam_cmd, 'utf-8')
+        command = (
+            object_id
+            + struct.pack("!I", CommandIds.TC_CAM_CMD_SEND)
+            + bytearray(cam_cmd, "utf-8")
+        )
        command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())

--- a/pus_tc/devs/ploc_supervisor.py
+++ b/pus_tc/devs/ploc_supervisor.py
@@ -32,8 +32,14 @@ MANUAL_INPUT = "1"
 update_file_dict = {
    MANUAL_INPUT: ["manual input", ""],
    "2": ["/mnt/sd0/ploc/supervisor/update.bin", "/mnt/sd0/ploc/supervisor/update.bin"],
-    "3": ["/mnt/sd0/ploc/supervisor/update-large.bin", "/mnt/sd0/ploc/supervisor/update-large.bin"],
-    "4": ["/mnt/sd0/ploc/supervisor/update-small.bin", "/mnt/sd0/ploc/supervisor/update-small.bin"],
+    "3": [
+        "/mnt/sd0/ploc/supervisor/update-large.bin",
+        "/mnt/sd0/ploc/supervisor/update-large.bin",
+    ],
+    "4": [
+        "/mnt/sd0/ploc/supervisor/update-small.bin",
+        "/mnt/sd0/ploc/supervisor/update-small.bin",
+    ],
 }

 event_buffer_path_dict = {
@@ -44,7 +50,6 @@ event_buffer_path_dict = {

 class SupvActionIds:
    HK_REPORT = 1
-    RESTART_MPSOC = 2
    START_MPSOC = 3
    SHUTWOWN_MPSOC = 4
    SEL_MPSOC_BOOT_IMAGE = 5
@@ -55,27 +60,19 @@ class SupvActionIds:
    DISABLE_HK = 10
    GET_BOOT_STATUS_REPORT = 11
    UPDATE_AVAILABLE = 12
-    WATCHDOGS_ENABLE = 13
-    WATCHDOGS_CONFIG_TIMEOUT = 14
    ENABLE_LATCHUP_ALERT = 15
    DISABLE_LATCHUP_ALERT = 16
-    AUTO_CALIBRATE_ALERT = 17
    SET_ALERT_LIMIT = 18
-    SET_ALERT_IRQ_FILTER = 19
    SET_ADC_SWEEP_PERIOD = 20
    SET_ADC_ENABLED_CHANNELS = 21
    SET_ADC_WINDOW_AND_STRIDE = 22
    SET_ADC_THRESHOLD = 23
    GET_LATCHUP_STATUS_REPORT = 24
    COPY_ADC_DATA_TO_MRAM = 25
-    ENABLE_NVMS = 26
    SELECT_NVM = 27
    RUN_AUTO_EM_TESTS = 28
    WIPE_MRAM = 29
    DUMP_MRAM = 30
-    SET_DBG_VERBOSITY = 31
-    CAN_LOOPBACK_TEST = 32
-    PRINT_CPU_STATS = 33
    SET_GPIO = 34
    READ_GPIO = 35
    RESTART_SUPERVISOR = 36
@@ -91,8 +88,6 @@ class SupvActionIds:
    TERMINATE_SUPV_HELPER = 49
    ENABLE_AUTO_TM = 50
    DISABLE_AUTO_TM = 51
-    ENABLE_ADC_MONITOR_TASK = 52
-    DISABLE_ADC_MONITOR_TASK = 53
    LOGGING_REQUEST_EVENT_BUFFERS = 54
    LOGGING_CLEAR_COUNTERS = 55
    LOGGING_SET_TOPIC = 56
@@ -134,11 +129,6 @@ def pack_ploc_supv_commands(
        command = object_id + struct.pack("!I", SupvActionIds.HK_REPORT)
        command = PusTelecommand(service=8, subservice=128, ssc=20, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "4":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Restart MPSoC"))
-        command = object_id + struct.pack("!I", SupvActionIds.RESTART_MPSOC)
-        command = PusTelecommand(service=8, subservice=128, ssc=21, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "5":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Start MPSoC"))
        command = object_id + struct.pack("!I", SupvActionIds.START_MPSOC)
@@ -162,9 +152,9 @@ def pack_ploc_supv_commands(
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "8":
        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set max restart tries: ")
+            (QueueCommands.PRINT, "PLOC Supervisor: Set max restart tries")
        )
-        restart_tries = int(input("Set maximum restart tries:"))
+        restart_tries = int(input("Specify maximum restart tries: "))
        command = (
            object_id
            + struct.pack("!I", SupvActionIds.SET_MAX_RESTART_TRIES)
@@ -186,7 +176,7 @@ def pack_ploc_supv_commands(
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "11":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set boot timeout"))
-        boot_timeout = int(input("Specify boot timeout [ms]:"))
+        boot_timeout = int(input("Specify boot timeout [ms]: "))
        command = (
            object_id
            + struct.pack("!I", SupvActionIds.SET_BOOT_TIMEOUT)
@@ -206,23 +196,6 @@ def pack_ploc_supv_commands(
        command = object_id + struct.pack("!I", SupvActionIds.GET_BOOT_STATUS_REPORT)
        command = PusTelecommand(service=8, subservice=128, ssc=30, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "14":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Update available"))
-        command = pack_update_available_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=31, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "15":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Watchdogs Enable"))
-        command = pack_watchdogs_enable_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "16":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Watchdog configure timeout")
-        )
-        command = pack_watchdog_config_timeout_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=33, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "17":
        tc_queue.appendleft(
            (QueueCommands.PRINT, "PLOC Supervisor: Enable latchup alert")
@@ -237,32 +210,11 @@ def pack_ploc_supv_commands(
        command = pack_lachtup_alert_cmd(object_id, False)
        command = PusTelecommand(service=8, subservice=128, ssc=35, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "19":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Auto calibrate alert")
-        )
-        command = pack_auto_calibrate_alert_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=36, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "20":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set alert limit"))
        command = pack_set_alert_limit_cmd(object_id)
        command = PusTelecommand(service=8, subservice=128, ssc=37, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "21":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set alert irq filter")
-        )
-        command = pack_set_alert_irq_filter_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=38, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "22":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set ADC sweep period")
-        )
-        command = pack_set_adc_sweep_period_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=39, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "23":
        tc_queue.appendleft(
            (QueueCommands.PRINT, "PLOC Supervisor: Set ADC enabled channels")
@@ -306,18 +258,6 @@ def pack_ploc_supv_commands(
        command = pack_mram_wipe_cmd(object_id)
        command = PusTelecommand(service=8, subservice=128, ssc=46, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "33":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Print CPU stats"))
-        command = pack_print_cpu_stats_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=48, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "34":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Set debug verbosity")
-        )
-        command = pack_set_debug_verbosity_cmd(object_id)
-        command = PusTelecommand(service=8, subservice=128, ssc=49, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "35":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set GPIO command"))
        command = pack_set_gpio_cmd(object_id)
@@ -373,69 +313,51 @@ def pack_ploc_supv_commands(
        command = PusTelecommand(service=8, subservice=128, ssc=57, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "43":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Terminate supervisor process"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.TERMINATE_SUPV_HELPER
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Terminate supervisor process")
        )
+        command = object_id + struct.pack("!I", SupvActionIds.TERMINATE_SUPV_HELPER)
        command = PusTelecommand(service=8, subservice=128, ssc=58, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "44":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Start MPSoC quiet"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.START_MPSOC_QUIET
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.START_MPSOC_QUIET)
        command = PusTelecommand(service=8, subservice=128, ssc=59, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "45":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set shutdown timeout"))
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Set shutdown timeout")
+        )
        command = pack_set_shutdown_timeout_command(object_id)
        command = PusTelecommand(service=8, subservice=128, ssc=60, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "46":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Factory flash"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.FACTORY_FLASH
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.FACTORY_FLASH)
        command = PusTelecommand(service=8, subservice=128, ssc=61, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "47":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Enable auto TM"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.ENABLE_AUTO_TM
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.ENABLE_AUTO_TM)
        command = PusTelecommand(service=8, subservice=128, ssc=62, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "48":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Disable auto TM"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.DISABLE_AUTO_TM
-        )
+        command = object_id + struct.pack("!I", SupvActionIds.DISABLE_AUTO_TM)
        command = PusTelecommand(service=8, subservice=128, ssc=63, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "49":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Enable ADC monitor task"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.ENABLE_ADC_MONITOR_TASK
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=64, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    elif op_code == "50":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Disable ADC monitor task"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.DISABLE_ADC_MONITOR_TASK
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=65, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "51":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Logging request event buffers"))
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Logging request event buffers")
+        )
        command = pack_logging_buffer_request(object_id)
        command = PusTelecommand(service=8, subservice=128, ssc=66, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "52":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Logging clear counters"))
-        command = object_id + struct.pack(
-            "!I", SupvActionIds.LOGGING_CLEAR_COUNTERS
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Logging clear counters")
        )
+        command = object_id + struct.pack("!I", SupvActionIds.LOGGING_CLEAR_COUNTERS)
        command = PusTelecommand(service=8, subservice=128, ssc=67, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "53":
@@ -444,18 +366,22 @@ def pack_ploc_supv_commands(
        command = PusTelecommand(service=8, subservice=128, ssc=68, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "54":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Logging request counters"))
-        command = object_id + struct.pack('!I', SupvActionIds.LOGGING_REQUEST_COUNTERS)
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Logging request counters")
+        )
+        command = object_id + struct.pack("!I", SupvActionIds.LOGGING_REQUEST_COUNTERS)
        command = PusTelecommand(service=8, subservice=128, ssc=69, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "55":
-        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Request ADC report"))
-        command = object_id + struct.pack('!I', SupvActionIds.REQUEST_ADC_REPORT)
+        tc_queue.appendleft(
+            (QueueCommands.PRINT, "PLOC Supervisor: Request ADC report")
+        )
+        command = object_id + struct.pack("!I", SupvActionIds.REQUEST_ADC_REPORT)
        command = PusTelecommand(service=8, subservice=128, ssc=70, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    elif op_code == "56":
        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Reset PL"))
-        command = object_id + struct.pack('!I', SupvActionIds.RESET_PL)
+        command = object_id + struct.pack("!I", SupvActionIds.RESET_PL)
        command = PusTelecommand(service=8, subservice=128, ssc=71, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())

@@ -552,7 +478,7 @@ def pack_auto_calibrate_alert_cmd(object_id: bytearray) -> bytearray:
    @param object_id    The object id of the PLOC supervisor handler.
    """
    latchup_id = get_latchup_id()
-    mg = int(input("Specify MG:"))
+    mg = int(input("Specify MG: "))
    command = bytearray()
    command = object_id + struct.pack("!I", SupvActionIds.AUTO_CALIBRATE_ALERT)
    command = command + struct.pack("!B", latchup_id)
@@ -573,7 +499,7 @@ def get_latchup_id() -> int:
        key_string = key.ljust(key_column_width)
        description_string = latchup_id_dict[key].ljust(description_column_width)
        print(f"{key_string} | {description_string}")
-    return int(input("Specify latchup ID:"))
+    return int(input("Specify latchup ID: "))


 def pack_set_alert_limit_cmd(object_id: bytearray) -> bytearray:
@@ -582,7 +508,7 @@ def pack_set_alert_limit_cmd(object_id: bytearray) -> bytearray:
    @param object_id    The object id of the PLOC supervisor handler.
    """
    latchup_id = get_latchup_id()
-    dutycycle = int(input("Specify dutycycle:"))
+    dutycycle = int(input("Specify dutycycle: "))
    command = bytearray()
    command = object_id + struct.pack("!I", SupvActionIds.SET_ALERT_LIMIT)
    command = command + struct.pack("!B", latchup_id)
@@ -590,49 +516,20 @@ def pack_set_alert_limit_cmd(object_id: bytearray) -> bytearray:
    return command


-def pack_set_alert_irq_filter_cmd(object_id: bytearray) -> bytearray:
-    """
-    @brief  This function packs the command to configure the latchup alert irq filter.
-    @param object_id    The object id of the PLOC supervisor handler.
-    """
-    latchup_id = get_latchup_id()
-    tp = int(input("Specify filter type (TP):"))
-    div = int(input("Specify clock divider (DIV):"))
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ALERT_IRQ_FILTER)
-    command = command + struct.pack("!B", latchup_id)
-    command = command + struct.pack("!B", tp)
-    command = command + struct.pack("!B", div)
-    return command
-
-
-def pack_set_adc_sweep_period_cmd(object_id: bytearray) -> bytearray:
-    """
-    @brief  This function packs the command to set the limit of a latchup alert.
-    @param object_id    The object id of the PLOC supervisor handler.
-    """
-    sweep_period = int(input("Specify sweep period (min 21 us):"))
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ADC_SWEEP_PERIOD)
-    command = command + struct.pack("!I", sweep_period)
-    return command
-
-
 def pack_set_adc_enabled_channels_cmd(object_id: bytearray) -> bytearray:
    """
    @brief  This function packs the command to enable or disable channels of the ADC.
    @param object_id    The object id of the PLOC supervisor handler.
    """
    ch = int(input("Specify ch: 0x"), 16)
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ADC_ENABLED_CHANNELS)
-    command = command + struct.pack("!H", ch)
-    return command
+    cmd = object_id + struct.pack("!I", SupvActionIds.SET_ADC_ENABLED_CHANNELS)
+    cmd = cmd + struct.pack("!H", ch)
+    return cmd


 def pack_set_adc_window_and_stride_cmd(object_id: bytearray) -> bytearray:
-    window_size = int(input("Specify window size:"))
-    striding_step_size = int(input("Specify striding step size:"))
+    window_size = int(input("Specify window size: "))
+    striding_step_size = int(input("Specify striding step size: "))
    command = bytearray()
    command = object_id + struct.pack("!I", SupvActionIds.SET_ADC_WINDOW_AND_STRIDE)
    command = command + struct.pack("!H", window_size)
@@ -648,18 +545,8 @@ def pack_set_adc_threshold_cmd(object_id: bytearray) -> bytearray:
    return command


-def pack_enable_nvms_cmd(object_id: bytearray) -> bytearray:
-    n01 = int(input("NVM0/1 (0 - off, 1 - on):"))
-    n3 = int(input("NVM3 (0 - off, 1 - on):"))
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.ENABLE_NVMS)
-    command = command + struct.pack("!B", n01)
-    command = command + struct.pack("!B", n3)
-    return command
-
-
 def pack_select_nvm_cmd(object_id: bytearray) -> bytearray:
-    mem = int(input("Specify NVM (0 - NVM0, 1 - MVM1):"))
+    mem = int(input("Specify NVM (0 - NVM0, 1 - MVM1): "))
    command = bytearray()
    command = object_id + struct.pack("!I", SupvActionIds.SELECT_NVM)
    command = command + struct.pack("!B", mem)
@@ -667,7 +554,7 @@ def pack_select_nvm_cmd(object_id: bytearray) -> bytearray:


 def pack_auto_em_tests_cmd(object_id: bytearray) -> bytearray:
-    test = int(input("Specify test (1 - complete, 2 - short):"))
+    test = int(input("Specify test (1 - complete, 2 - short): "))
    command = bytearray()
    command = object_id + struct.pack("!I", SupvActionIds.RUN_AUTO_EM_TESTS)
    command = command + struct.pack("!B", test)
@@ -684,80 +571,39 @@ def pack_mram_wipe_cmd(object_id: bytearray) -> bytearray:
    return command


-def pack_print_cpu_stats_cmd(object_id: bytearray) -> bytearray:
-    en = 1
-    command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.PRINT_CPU_STATS)
-    command = command + struct.pack("!B", en)
-    return command
-
-
-def pack_set_debug_verbosity_cmd(object_id: bytearray) -> bytearray:
-    command = bytearray()
-    verbosity = get_debug_verbosity()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_DBG_VERBOSITY)
-    command = command + struct.pack("!B", verbosity)
-    return command
-
-
 def pack_update_command(object_id: bytearray) -> bytearray:
    command = bytearray()
    memory_id = int(input("Specify memory ID: "))
    start_address = int(input("Specify start address: 0x"), 16)
    update_file = get_update_file()
    command += object_id
-    command += struct.pack('!I', SupvActionIds.PERFORM_UPDATE)
-    command += bytearray(update_file, 'utf-8')
+    command += struct.pack("!I", SupvActionIds.PERFORM_UPDATE)
+    command += bytearray(update_file, "utf-8")
    # Adding null terminator
-    command += struct.pack('!B', 0)
-    command += struct.pack('!B', memory_id)
-    command += struct.pack('!I', start_address)
+    command += struct.pack("!B", 0)
+    command += struct.pack("!B", memory_id)
+    command += struct.pack("!I", start_address)
    return command


 def pack_set_shutdown_timeout_command(object_id: bytearray) -> bytearray:
    command = bytearray()
    command += object_id
-    command += struct.pack('!I', SupvActionIds.SET_SHUTDOWN_TIMEOUT)
+    command += struct.pack("!I", SupvActionIds.SET_SHUTDOWN_TIMEOUT)
    timeout = int(input("Specify shutdown timeout (ms): "))
-    command += struct.pack('!I', timeout)
+    command += struct.pack("!I", timeout)
    return command


 def pack_logging_buffer_request(object_id: bytearray) -> bytearray:
    command = bytearray()
    command += object_id
-    command += struct.pack('!I', SupvActionIds.LOGGING_REQUEST_EVENT_BUFFERS)
+    command += struct.pack("!I", SupvActionIds.LOGGING_REQUEST_EVENT_BUFFERS)
    path = get_event_buffer_path()
-    command += bytearray(path, 'utf-8')
+    command += bytearray(path, "utf-8")
    return command


-def get_debug_verbosity() -> int:
-    tries = 0
-    while tries < 3:
-        try:
-            print("Debug verbosity options")
-            verbosity_options_dict = {
-                0: "None",
-                1: "Error",
-                2: "Warn",
-                3: "Info",
-            }
-            print("{:<6} | {}".format("Key", "Description"))
-            for entry in verbosity_options_dict.items():
-                print("{:<6} | {}".format(entry[0], entry[1]))
-            verbosity = int(input("Specify verbosity key: "))
-            if verbosity > len(verbosity_options_dict) - 1:
-                raise ValueError
-            return verbosity
-        except ValueError:
-            LOGGER.warning("Invalid verbosity key specified")
-            tries = tries + 1
-    LOGGER.error("get_debug_verbosity: Exceeded max tries to input verbosity key")
-    quit()
-
-
 def pack_set_gpio_cmd(object_id: bytearray) -> bytearray:
    port = int(input("Specify port : 0x"), 16)
    pin = int(input("Specify pin: 0x"), 16)
@@ -779,9 +625,9 @@ def pack_read_gpio_cmd(object_id: bytearray) -> bytearray:


 def pack_logging_set_topic(objetc_id: bytearray) -> bytearray:
-    command = objetc_id + struct.pack('!I', SupvActionIds.LOGGING_SET_TOPIC)
+    command = objetc_id + struct.pack("!I", SupvActionIds.LOGGING_SET_TOPIC)
    tpc = int(input("Specify logging topic: "))
-    command += struct.pack('!B', tpc)
+    command += struct.pack("!B", tpc)
    return command


--- a/pus_tc/devs/syrlinks_hk_handler.py
+++ b/pus_tc/devs/syrlinks_hk_handler.py
@@ -64,17 +64,17 @@ def pack_syrlinks_command(
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "3":
        tc_queue.appendleft((QueueCommands.PRINT, "syrlinks: Set TX mode standby"))
-        command = object_id + struct.pack('!I', CommandIds.SET_TX_MODE_STANDBY)
+        command = object_id + struct.pack("!I", CommandIds.SET_TX_MODE_STANDBY)
        command = PusTelecommand(service=8, subservice=128, ssc=10, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "4":
        tc_queue.appendleft((QueueCommands.PRINT, "syrlinks: Set TX mode modulation"))
-        command = object_id + struct.pack('!I', CommandIds.SET_TX_MODE_MODULATION)
+        command = object_id + struct.pack("!I", CommandIds.SET_TX_MODE_MODULATION)
        command = PusTelecommand(service=8, subservice=128, ssc=11, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "5":
        tc_queue.appendleft((QueueCommands.PRINT, "syrlinks: Set TX mode CW"))
-        command = object_id + struct.pack('!I', CommandIds.SET_TX_MODE_CW)
+        command = object_id + struct.pack("!I", CommandIds.SET_TX_MODE_CW)
        command = PusTelecommand(service=8, subservice=128, ssc=12, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "6":
@@ -89,26 +89,26 @@ def pack_syrlinks_command(
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "8":
        tc_queue.appendleft((QueueCommands.PRINT, "Syrlinks: Read TX status"))
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_STATUS)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_STATUS)
        command = PusTelecommand(service=8, subservice=128, ssc=13, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "9":
        tc_queue.appendleft((QueueCommands.PRINT, "Syrlinks: Read TX waveform"))
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_WAVEFORM)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_WAVEFORM)
        command = PusTelecommand(service=8, subservice=128, ssc=14, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "10":
        tc_queue.appendleft(
            (QueueCommands.PRINT, "Syrlinks: Read TX AGC value high byte")
        )
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_AGC_VALUE_HIGH_BYTE)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_AGC_VALUE_HIGH_BYTE)
        command = PusTelecommand(service=8, subservice=128, ssc=15, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "11":
        tc_queue.appendleft(
            (QueueCommands.PRINT, "Syrlinks: Read TX AGC value low byte")
        )
-        command = object_id + struct.pack('!I', CommandIds.READ_TX_AGC_VALUE_LOW_BYTE)
+        command = object_id + struct.pack("!I", CommandIds.READ_TX_AGC_VALUE_LOW_BYTE)
        command = PusTelecommand(service=8, subservice=128, ssc=16, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
    if op_code == "12":
--- a/pus_tc/tc_packer_hook.py
+++ b/pus_tc/tc_packer_hook.py
@@ -26,7 +26,7 @@ from pus_tc.devs.imtq import pack_imtq_test_into
 from pus_tc.devs.tmp1075 import pack_tmp1075_test_into
 from pus_tc.devs.ploc_mpsoc import pack_ploc_mpsoc_commands
 from pus_tc.devs.ploc_supervisor import pack_ploc_supv_commands
-from pus_tc.devs.heater import pack_heater_test_into
+from pus_tc.devs.heater import pack_heater_cmds
 from pus_tc.devs.reaction_wheels import pack_single_rw_test_into
 from pus_tc.devs.rad_sensor import pack_rad_sensor_test_into
 from pus_tc.devs.ploc_upater import pack_ploc_updater_test_into
@@ -134,7 +134,9 @@ def pack_service_queue_user(
        )
    if service == CustomServiceList.HEATER.value:
        object_id = HEATER_ID
-        return pack_heater_test_into(object_id=object_id, tc_queue=service_queue)
+        return pack_heater_cmds(
+            object_id=object_id, tc_queue=service_queue, op_code=op_code
+        )
    if service == CustomServiceList.IMTQ.value:
        object_id = IMTQ_HANDLER_ID
        return pack_imtq_test_into(
--- a/pus_tm/action_reply_handler.py
+++ b/pus_tm/action_reply_handler.py
@@ -58,7 +58,7 @@ def handle_imtq_replies(
 def handle_ploc_replies(
    action_id: int, printer: FsfwTmTcPrinter, custom_data: bytearray
 ):
-    if action_id == PlocReplyIds.tm_mem_read_report:
+    if action_id == PlocReplyIds.TM_MEM_READ_RPT:
        header_list = [
            "PLOC Memory Address",
            "PLOC Mem Len",
@@ -73,6 +73,16 @@ def handle_ploc_replies(
        print(content_list)
        printer.file_logger.info(header_list)
        printer.file_logger.info(content_list)
+    elif action_id == PlocReplyIds.TM_CAM_CMD_RPT:
+        header_list = ["Camera reply string", "ACK"]
+        content_list = [
+            custom_data[: len(custom_data) - 1].decode("utf-8"),
+            hex(custom_data[-1]),
+        ]
+        print(header_list)
+        print(content_list)
+        printer.file_logger.info(header_list)
+        printer.file_logger.info(content_list)


 def handle_supervisor_replies(
@@ -86,6 +96,13 @@ def handle_supervisor_replies(
        print(content_list)
        printer.file_logger.info(header_list)
        printer.file_logger.info(content_list)
+    elif action_id == SupvActionIds.READ_GPIO:
+        header_list = ["GPIO state"]
+        content_list = [struct.unpack("!H", custom_data[:2])[0]]
+        print(header_list)
+        print(content_list)
+        printer.file_logger.info(header_list)
+        printer.file_logger.info(content_list)


 def handle_startracker_replies(
--- a/2
+++ b/2
Author	SHA1	Message	Date
Robin Müller	a58229dcd5	Merge pull request 'v1.10.0' (#65 ) from develop into master Reviewed-on: #65	2022-05-05 14:35:03 +02:00
Robin Müller	78a634fb5f	Merge branch 'master' into develop	2022-05-05 14:34:48 +02:00
Robin Mueller	258c1074f1	Merge branch 'mueller/heater-cmds' into develop	2022-05-05 14:33:13 +02:00
Robin Mueller	9ec84a01a3	small bugfix	2022-05-05 14:33:02 +02:00
Robin Müller	17b6422cf5	Merge pull request 'Heater Commands' (#63 ) from mueller/heater-cmds into develop Reviewed-on: #63	2022-05-05 14:32:42 +02:00
Robin Mueller	d86a85b06d	completed health commands	2022-05-05 14:30:28 +02:00
Robin Mueller	b8af022487	bump tmtccmd	2022-05-05 13:42:58 +02:00
Robin Mueller	4bf58da187	Merge remote-tracking branch 'origin/develop' into mueller/heater-cmds	2022-05-05 00:44:56 +02:00
Robin Müller	2e24f764a6	Merge pull request 'PLOC Commands' (#64 ) from meier/ploc into develop Reviewed-on: #64	2022-05-05 00:37:14 +02:00
Jakob Meier	a4bf730b22	Merge branch 'develop' into meier/ploc	2022-05-04 19:09:28 +02:00
Jakob Meier	213e6709ac	cam cmd reply handling	2022-05-04 19:08:54 +02:00
Robin Mueller	5e9f83cd68	add returnvalue	2022-05-04 16:47:25 +02:00
Robin Mueller	72552c5090	update changelog	2022-05-04 14:46:00 +02:00
Robin Mueller	0486751571	Merge remote-tracking branch 'origin/develop' into mueller/heater-cmds	2022-05-04 14:44:48 +02:00
Robin Mueller	11ea4ad44e	add changelog	2022-05-04 14:43:47 +02:00
Jakob Meier	9c3a8e9ff2	removed unused adc monitor commands	2022-05-04 12:48:43 +02:00
Cleanroom Laptop L15	6f8fe84d67	rerun generators, bugfix	2022-05-04 10:26:32 +02:00
Robin Mueller	8bc51b293b	old API	2022-05-04 08:48:43 +02:00
Jakob Meier	b3f40b38fc	Merge branch 'meier/develop' into meier/ploc	2022-05-03 19:12:50 +02:00
Jakob Meier	0eb4d0fb26	fixed conflicts	2022-05-03 19:12:37 +02:00
Jakob Meier	7413a5db5f	supervisor read gpio reply handling	2022-05-03 19:09:23 +02:00
Robin Mueller	927508e65d	heater names	2022-05-03 19:03:10 +02:00
Robin Mueller	79d6e15c55	some heater cmds improvements	2022-05-03 19:01:38 +02:00
Robin Mueller	f60228f521	cleaned up cmd handling	2022-05-03 18:36:28 +02:00
Robin Mueller	aab5c28960	update auto-generated files	2022-05-03 16:32:33 +02:00
Jakob Meier	c7a19f7122	udpate gitignore	2022-05-03 15:27:43 +02:00
Jakob Meier	c5f99d80a2	fixed conflicts	2022-05-03 15:02:10 +02:00
Jakob Meier	fe833edc91	tmtccmd update	2022-05-02 13:47:44 +02:00
Robin Mueller	0a47c17fa6	bump tmtccmd	2022-05-02 12:53:01 +02:00
Robin Mueller	8d0a831229	rerun event parser	2022-05-02 12:39:02 +02:00
Robin Mueller	4e127cb049	update tmtccmd	2022-05-02 12:37:12 +02:00
Robin Müller	fd1534c168	Merge pull request 'tmtc improvements' (#62 ) from meier/ploc into develop Reviewed-on: #62	2022-05-02 12:36:32 +02:00
Jakob Meier	bd3d5396da	added tmtc_conf.json	2022-04-30 15:33:24 +02:00
Jakob Meier	d8ba63c496	gitignore update	2022-04-30 15:32:34 +02:00
Jakob Meier	58b9a3cdaf	tmtccmd update	2022-04-30 15:31:40 +02:00
Robin Müller	f7fd1e5bec	Merge pull request 'v1.9.0' (#53 ) from develop into master Reviewed-on: #53	2022-04-07 17:39:41 +02:00
Jakob Meier	3c6b88cfcd	service 17 run config	2022-03-09 10:50:21 +01:00
Jakob Meier	39dc222068	Merge branch 'develop' into meier/develop	2022-03-09 10:49:51 +01:00
Jakob.Meier	b0f6551c0a	Merge branch 'develop' into meier/develop	2021-08-20 11:35:26 +02:00
Jakob.Meier	a47925859b	Merge branch 'meier/plocUpdater' into develop	2021-08-20 11:34:43 +02:00
Jakob.Meier	77e46c12ba	Merge branch 'develop' into meier/plocUpdater	2021-08-20 08:41:51 +02:00
Jakob.Meier	df8f86ebd6	Merge branch 'meier/pcduSwitchCommanding' into meier/develop	2021-08-18 08:27:37 +02:00