release check helper

Reviewed-on: #736

CHANGELOG.md

@@ -8,14 +8,36 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 # [unreleased]
 
-# [v6.0.0]
+# [v6.0.0] 2023-02-10
 
 ## Fixes
 
+- `CService200ModeManagement`: Various bugfixes which lead to now execution complete being generated
+  on mode announcements, duplicate mode reply generated on announce commands, and the mode read
+  subservice not working properly.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/736
+- Memory leak fixes for the TCP/IP TMTC bridge.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/737
+- `Service9TimeManagement`: Fix the time dump at the `SET_TIME` subservice: Include clock timeval
+  seconds instead of uptime.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/726
+- HAL MGM3100 Handler: Use axis specific gain/scaling factors. Previously,
+  only the X scaling factor was used.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/724
+- HAL MGM3100 Handler: Z value was previously calculated with bytes of the X value.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/733
+- DHB `setNormalDatapoolEntriesInvalid`: The default implementation did not set the validity
+  to false correctly because the `read` and `write` calls were missing.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/728
+- PUS TMTC creator module: Sequence flags were set to continuation segment (0b00) instead
+  of the correct unsegmented flags (0b11) as specified in the standard.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/727
 - TC Scheduler Service 11: Add size and CRC check for contained TC.
+  Bug: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/issues/719
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/720
 - Only delete health table entry in `HealthHelper` destructor if
   health table was set.
-  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/710/files
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/710
 - I2C Bugfixes: Do not keep iterator as member and fix some incorrect handling with the iterator.
   Also properly reset the reply size for successfull transfers and erroneous transfers.
   PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/700
@@ -28,6 +50,13 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## Added
 
+- Empty constructor for `CdsShortTimeStamper` which does not do an object manager registration.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/730
+- `Service9TimeManagement`: Add `DUMP_TIME` (129) subservice.
+- `TcpTmTcServer`: Allow setting the `SO_REUSEADDR` and `SO_REUSEPORT`
+  option on the TCP server. CTOR prototype has changed and expects an explicit
+  TCP configuration struct to be passed.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/722
 - `DleParser` helper class to parse DLE encoded packets from a byte stream.
   PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/711
 - `UioMapper` is able to resolve symlinks now.
@@ -40,7 +69,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - `AcceptsTelemetryIF`: `getReportReceptionQueue` is const now
   PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/712
 - Moved some container returnvalues to dedicated header and namespace
-  to they can be used without template specification.
+  so they can be used without template specification.
   PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/707
 - Remove default secondary header argument for
   `uint16_t getTcSpacePacketIdFromApid(uint16_t apid, bool secondaryHeaderFlag)` and
@@ -101,7 +130,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
      implementation without an extra component
   PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/682
 
-# [v5.0.0] 25.07.2022
+# [v5.0.0] 2022-07-25
 
 ## Changes
 

CMakeLists.txt

@@ -153,16 +153,12 @@ if(FSFW_BUILD_TESTS)
       "${MSG_PREFIX} Building the FSFW unittests in addition to the static library"
   )
   # Check whether the user has already installed Catch2 first
-  # Suppress this check for rtems, because rtems is cross compiled
+  find_package(Catch2 ${FSFW_CATCH2_LIB_MAJOR_VERSION} QUIET)
-  # on CI with preinstalled Catch which needs to be cross compiled
-  if(NOT FSFW_OSAL MATCHES "rtems")
-  find_package(Catch2 ${FSFW_CATCH2_LIB_MAJOR_VERSION})
-  endif()
   # Not installed, so use FetchContent to download and provide Catch2
   if(NOT Catch2_FOUND)
     message(
       STATUS
-        "${MSG_PREFIX} Catch2 installation not found. Downloading Catch2 library with FetchContent"
+        "${MSG_PREFIX} Catch2 installation not found. Downloading Catch2 library with FetchContent."
     )
     include(FetchContent)
 
@@ -178,27 +174,6 @@ if(FSFW_BUILD_TESTS)
   configure_file(unittests/testcfg/FSFWConfig.h.in FSFWConfig.h)
   configure_file(unittests/testcfg/TestsConfig.h.in tests/TestsConfig.h)
 
-  if(FSFW_OSAL MATCHES "freertos")
-    message(STATUS "${MSG_PREFIX} Downloading FreeRTOS with FetchContent")
-    include(FetchContent)
-
-    set(FreeRTOS_PORT posix)
-
-    FetchContent_Declare(
-      FreeRTOS
-      GIT_REPOSITORY https://egit.irs.uni-stuttgart.de/fsfw/FreeRTOS-LTS
-      GIT_TAG develop
-      GIT_SUBMODULES FreeRTOS/FreeRTOS-Kernel)
-
-    FetchContent_MakeAvailable(FreeRTOS)
-
-    set(LIB_OS_NAME FreeRTOS)
-    target_include_directories(FreeRTOS PUBLIC unittests/testcfg/freertos)
-    set(THREADS_PREFER_PTHREAD_FLAG ON)
-    find_package(Threads REQUIRED)
-    target_link_libraries(FreeRTOS PRIVATE ${CMAKE_THREAD_LIBS_INIT})
-  endif()
-
   project(${FSFW_TEST_TGT} CXX C)
   add_executable(${FSFW_TEST_TGT})
   if(IPO_SUPPORTED AND FSFW_ENABLE_IPO)
@@ -221,17 +196,13 @@ message(
 )
 
 # Check whether the user has already installed ETL first
-# Suppress this check for rtems, because rtems is cross compiled
-# on CI with preinstalled etl which is not found when cross compiling
-if(NOT FSFW_OSAL MATCHES "rtems")
 find_package(${FSFW_ETL_LIB_NAME} ${FSFW_ETL_LIB_MAJOR_VERSION} QUIET)
-endif()
 # Not installed, so use FetchContent to download and provide etl
 if(NOT ${FSFW_ETL_LIB_NAME}_FOUND)
   message(
     STATUS
-      "${MSG_PREFIX} No ETL installation was found with find_package. Installing and providing "
+      "${MSG_PREFIX} ETL installation not found. Downloading ETL with FetchContent."
-      "etl with FindPackage")
+  )
   include(FetchContent)
 
   FetchContent_Declare(
@@ -255,7 +226,6 @@ if(FSFW_FETCH_CONTENT_TARGETS)
     # GitHub issue: https://github.com/catchorg/Catch2/issues/2417
     set_target_properties(Catch2 PROPERTIES DEBUG_POSTFIX "")
   endif()
-
 endif()
 
 set(FSFW_CORE_INC_PATH "inc")
@@ -390,9 +360,6 @@ if(FSFW_BUILD_TESTS)
   endif()
   target_link_libraries(${FSFW_TEST_TGT} PRIVATE Catch2::Catch2
                                                  ${LIB_FSFW_NAME})
-  if(FSFW_OSAL MATCHES "freertos")
-    target_link_libraries(${FSFW_TEST_TGT} PRIVATE FreeRTOS)
-  endif()
 endif()
 
 # The project CMakeLists file has to set the FSFW_CONFIG_PATH and add it. If

automation/Dockerfile

@@ -5,7 +5,7 @@ RUN apt-get --yes upgrade
 
 #tzdata is a dependency, won't install otherwise
 ARG DEBIAN_FRONTEND=noninteractive
-RUN apt-get --yes install gcc g++ cmake make lcov git valgrind nano iputils-ping python3 pip doxygen graphviz rsync wget qemu-system-arm
+RUN apt-get --yes install gcc g++ cmake make lcov git valgrind nano iputils-ping python3 pip doxygen graphviz rsync
 
 RUN python3 -m pip install sphinx breathe
 
@@ -21,12 +21,8 @@ RUN git clone https://github.com/ETLCPP/etl.git && \
         cmake -B build . && \
         cmake --install build/
 
-RUN wget -qO- https://buggy.irs.uni-stuttgart.de/rtems_releases/rtems6-12.2.1.tar.bz2 | tar -xj -C /opt/
-
-ENV PATH="$PATH:/opt/rtems/6/bin"
-
 #ssh needs a valid user to work
-RUN adduser -q --uid 114 jenkins
+RUN adduser --uid 114 jenkins
 
 #add documentation server to known hosts
 RUN echo "|1|/LzCV4BuTmTb2wKnD146l9fTKgQ=|NJJtVjvWbtRt8OYqFgcYRnMQyVw= ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBNL8ssTonYtgiR/6RRlSIK9WU1ywOcJmxFTLcEblAwH7oifZzmYq3XRfwXrgfMpylEfMFYfCU8JRqtmi19xc21A=" >> /etc/ssh/ssh_known_hosts

automation/Jenkinsfile

@@ -2,61 +2,86 @@ pipeline {
     environment {
         BUILDDIR_HOST = 'cmake-build-tests-host'
         BUILDDIR_LINUX = 'cmake-build-tests-linux'
-        BUILDDIR_FREERTOS = 'cmake-build-tests-freertos'
-        BUILDDIR_RTEMS = 'cmake-build-tests-rtems'
         DOCDDIR = 'cmake-build-documentation'
     }
     agent {
         docker { 
-            image 'fsfw-ci:d7'
+            image 'fsfw-ci:d6'
             args '--network host --sysctl fs.mqueue.msg_max=100'
         }
     }
     stages {
         stage('Host') {
-            steps {
+            stages{
-                sh 'rm -rf $BUILDDIR_HOST'
+                stage('Clean') {
-
+                    steps {
-                dir(BUILDDIR_HOST) {
+                        sh 'rm -rf $BUILDDIR_HOST'
-                    sh 'cmake -DFSFW_OSAL=host -DFSFW_BUILD_TESTS=ON -DFSFW_CICD_BUILD=ON ..'
+                    }
-                    sh 'cmake --build . -j4'
+                }
-                    sh 'cmake --build . -- fsfw-tests_coverage -j4'
+                stage('Configure') {
-                    sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'cmake -DFSFW_OSAL=host -DFSFW_BUILD_TESTS=ON -DFSFW_CICD_BUILD=ON ..'
+                        }
+                    }
+                }
+                stage('Build') {
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'cmake --build . -j4'
+                        }
+                    }
+                }
+                stage('Unittests') {
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'cmake --build . -- fsfw-tests_coverage -j4'
+                        }
+                    }
+                }
+                stage('Valgrind') {
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
+                        }
+                    }
                 }
             }
         }
         stage('Linux') {
-            steps {
+            stages{
-                sh 'rm -rf $BUILDDIR_LINUX'
+                stage('Clean') {
-
+                    steps {
-                dir(BUILDDIR_LINUX) {
+                        sh 'rm -rf $BUILDDIR_LINUX'
-                    sh 'cmake -DFSFW_OSAL=linux -DFSFW_BUILD_TESTS=ON -DFSFW_CICD_BUILD=ON ..'
+                    }
-                    sh 'cmake --build . -j4'
-                    sh 'cmake --build . -- fsfw-tests_coverage -j4'
-                    sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
                 }
-            }
+                stage('Configure') {
-        }
+                    steps {
-        stage('FreeRTOS') {
+                        dir(BUILDDIR_LINUX) {
-            steps {
+                            sh 'cmake -DFSFW_OSAL=linux -DFSFW_BUILD_TESTS=ON -DFSFW_CICD_BUILD=ON ..'
-                sh 'rm -rf $BUILDDIR_FREERTOS'
+                        }
-
+                    }
-                dir(BUILDDIR_FREERTOS) {
-                    sh 'cmake -DFSFW_OSAL=freertos -DFSFW_BUILD_TESTS=ON -DFSFW_CICD_BUILD=ON ..'
-                    sh 'cmake --build . -j4'
-                    sh 'cmake --build . -- fsfw-tests_coverage -j4'
-                    //sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
                 }
-            }
+                stage('Build') {
-        }
+                    steps {
-        stage('rtems') {
+                        dir(BUILDDIR_LINUX) {
-            steps {
+                            sh 'cmake --build . -j4'
-                sh 'rm -rf $BUILDDIR_RTEMS'
+                        }
-
+                    }
-                dir(BUILDDIR_RTEMS) {
+                }
-                    sh 'cmake -DFSFW_OSAL=rtems -DFSFW_BUILD_TESTS=ON -DFSFW_TESTS_GEN_COV=OFF -DFSFW_CICD_BUILD=ON -DCMAKE_TOOLCHAIN_FILE=../unittests/testcfg/rtems/cmake/aarch64-rtems6-toolchain.cmake ..'
+                stage('Unittests') {
-                    sh 'cmake --build . -j4'
+                    steps {
-                    sh 'qemu-system-aarch64 -no-reboot -nographic -serial mon:stdio -semihosting -machine virt,gic-version=3 -cpu cortex-a72 -m 4000  -kernel fsfw-tests'
+                        dir(BUILDDIR_LINUX) {
+                            sh 'cmake --build . -- fsfw-tests_coverage -j4'
+                        }
+                    }
+                }
+                stage('Valgrind') {
+                    steps {
+                        dir(BUILDDIR_LINUX) {
+                            sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
+                        }
+                    }
                 }
             }
         }

scripts/check_release.py

@@ -0,0 +1,43 @@
+import argparse
+import json
+import urllib.request
+import re
+
+def main() -> None:
+    parser = argparse.ArgumentParser(
+        description="List undocumented PRs"
+    )
+    parser.add_argument("-m", "--milestone", type=int, required=True)
+    args = parser.parse_args()
+    
+    milestone = args.milestone
+    
+    with urllib.request.urlopen("https://egit.irs.uni-stuttgart.de/api/v1/repos/fsfw/fsfw/milestones/" + str(milestone)) as milestone_json:
+        milestone_title = json.load(milestone_json)['title']
+    
+    match = re.search("(v[0-9]+\.[0-9]+\.[0-9]+)", milestone_title)
+    
+    if not match:
+        print("invalid Milestone name")
+        exit(1)
+    
+    version = match.group(0)
+    
+    print("detected Version " + version)
+    
+    milestone_prs = []
+    
+    page = 1
+    last_count = 1;
+    while last_count != 0:
+        with urllib.request.urlopen("https://egit.irs.uni-stuttgart.de/api/v1/repos/fsfw/fsfw/pulls?state=closed&milestone=" + str(milestone) + "&limit=100&page=" + str(page)) as pull_requests_json:
+            pull_requests = json.load(pull_requests_json)
+            for pr in pull_requests:
+                milestone_prs.append(pr['number'])
+            page += 1
+            last_count = len(pull_requests)
+    
+    print("Found " + str(len(milestone_prs)) + " closed PRs in Milestone")
+
+
+main()

src/fsfw/devicehandlers/DeviceHandlerBase.cpp

@@ -1,5 +1,6 @@
 #include "fsfw/devicehandlers/DeviceHandlerBase.h"
 
+#include "fsfw/datapool/PoolReadGuard.h"
 #include "fsfw/datapoollocal/LocalPoolVariable.h"
 #include "fsfw/devicehandlers/AcceptsDeviceResponsesIF.h"
 #include "fsfw/devicehandlers/DeviceTmReportingWrapper.h"
@@ -1508,7 +1509,10 @@ DeviceCommandId_t DeviceHandlerBase::getPendingCommand() const {
 void DeviceHandlerBase::setNormalDatapoolEntriesInvalid() {
   for (const auto& reply : deviceReplyMap) {
     if (reply.second.dataSet != nullptr) {
-      reply.second.dataSet->setValidity(false, true);
+      PoolReadGuard pg(reply.second.dataSet);
+      if (pg.getReadResult() == returnvalue::OK) {
+        reply.second.dataSet->setValidity(false, true);
+      }
     }
   }
 }

src/fsfw/health/HasHealthIF.h

@@ -16,26 +16,24 @@ class HasHealthIF {
   };
 
   static const uint8_t INTERFACE_ID = CLASS_ID::HAS_HEALTH_IF;
-  static const ReturnValue_t OBJECT_NOT_HEALTHY = MAKE_RETURN_CODE(1);
+  static constexpr ReturnValue_t OBJECT_NOT_HEALTHY = returnvalue::makeCode(INTERFACE_ID, 1);
-  static const ReturnValue_t INVALID_HEALTH_STATE = MAKE_RETURN_CODE(2);
+  static constexpr ReturnValue_t INVALID_HEALTH_STATE = returnvalue::makeCode(INTERFACE_ID, 2);
+  static constexpr ReturnValue_t IS_EXTERNALLY_CONTROLLED = returnvalue::makeCode(INTERFACE_ID, 3);
 
   static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::SYSTEM_MANAGER_1;
+  //! P1: New Health, P2: Old Health
   static const Event HEALTH_INFO = MAKE_EVENT(6, severity::INFO);
   static const Event CHILD_CHANGED_HEALTH = MAKE_EVENT(7, severity::INFO);
   static const Event CHILD_PROBLEMS = MAKE_EVENT(8, severity::LOW);
-  static const Event OVERWRITING_HEALTH =
+  //! Assembly overwrites health information of children to keep satellite alive.
-      MAKE_EVENT(9, severity::LOW);  //!< Assembly overwrites health information of children to keep
+  static const Event OVERWRITING_HEALTH = MAKE_EVENT(9, severity::LOW);
-                                     //!< satellite alive.
+  //! Someone starts a recovery of a component (typically power-cycle). No parameters.
-  static const Event TRYING_RECOVERY =
+  static const Event TRYING_RECOVERY = MAKE_EVENT(10, severity::MEDIUM);
-      MAKE_EVENT(10, severity::MEDIUM);  //!< Someone starts a recovery of a component (typically
+  //! Recovery is ongoing. Comes twice during recovery.
-                                         //!< power-cycle). No parameters.
+  //! P1: 0 for the first, 1 for the second event. P2: 0
-  static const Event RECOVERY_STEP =
+  static const Event RECOVERY_STEP = MAKE_EVENT(11, severity::MEDIUM);
-      MAKE_EVENT(11, severity::MEDIUM);  //!< Recovery is ongoing. Comes twice during recovery. P1:
+  //! Recovery was completed. Not necessarily successful. No parameters.
-                                         //!< 0 for the first, 1 for the second event. P2: 0
+  static const Event RECOVERY_DONE = MAKE_EVENT(12, severity::MEDIUM);
-  static const Event RECOVERY_DONE = MAKE_EVENT(
-      12,
-      severity::MEDIUM);  //!< Recovery was completed. Not necessarily successful. No parameters.
-
   virtual ~HasHealthIF() {}
 
   virtual MessageQueueId_t getCommandQueue() const = 0;

src/fsfw/internalerror/InternalErrorReporter.cpp

@@ -7,10 +7,10 @@
 
 InternalErrorReporter::InternalErrorReporter(object_id_t setObjectId, uint32_t messageQueueDepth)
     : SystemObject(setObjectId),
-      commandQueue(QueueFactory::instance()->createMessageQueue(messageQueueDepth)),
       poolManager(this, commandQueue),
       internalErrorSid(setObjectId, InternalErrorDataset::ERROR_SET_ID),
       internalErrorDataset(this) {
+  commandQueue = QueueFactory::instance()->createMessageQueue(messageQueueDepth);
   mutex = MutexFactory::instance()->createMutex();
 }
 

src/fsfw/modes/ModeMessage.cpp

@@ -24,3 +24,19 @@ void ModeMessage::setCantReachMode(CommandMessage* message, ReturnValue_t reason
   message->setParameter(reason);
   message->setParameter2(0);
 }
+
+void ModeMessage::setModeAnnounceMessage(CommandMessage& message, bool recursive) {
+  Command_t cmd;
+  if (recursive) {
+    cmd = CMD_MODE_ANNOUNCE_RECURSIVELY;
+  } else {
+    cmd = CMD_MODE_ANNOUNCE;
+  }
+  message.setCommand(cmd);
+}
+
+void ModeMessage::setCmdModeMessage(CommandMessage& message, Mode_t mode, Submode_t submode) {
+  setModeMessage(&message, CMD_MODE_COMMAND, mode, submode);
+}
+
+void ModeMessage::setModeReadMessage(CommandMessage& message) { message.setCommand(CMD_MODE_READ); }

src/fsfw/modes/ModeMessage.h

@@ -45,6 +45,9 @@ class ModeMessage {
 
   static void setModeMessage(CommandMessage* message, Command_t command, Mode_t mode,
                              Submode_t submode);
+  static void setCmdModeMessage(CommandMessage& message, Mode_t mode, Submode_t submode);
+  static void setModeAnnounceMessage(CommandMessage& message, bool recursive);
+  static void setModeReadMessage(CommandMessage& message);
   static void setCantReachMode(CommandMessage* message, ReturnValue_t reason);
   static void clear(CommandMessage* message);
 };

src/fsfw/osal/CMakeLists.txt

@@ -18,7 +18,10 @@ elseif(FSFW_OSAL MATCHES "host")
   endif()
   set(FSFW_OSAL_HOST 1)
 else()
-  message(WARNING "The OS_FSFW variable was not set. Assuming host OS..")
+  message(
+    WARNING
+      "${MSG_PREFIX} The FSFW_OSAL variable was not set. Assuming host OS..")
+
   # Not set. Assumuing this is a host build, try to determine host OS
   if(WIN32)
     add_subdirectory(host)

src/fsfw/osal/common/TcpTmTcServer.cpp

@@ -26,12 +26,12 @@
 const std::string TcpTmTcServer::DEFAULT_SERVER_PORT = tcpip::DEFAULT_SERVER_PORT;
 
 TcpTmTcServer::TcpTmTcServer(object_id_t objectId, object_id_t tmtcTcpBridge,
-                             size_t receptionBufferSize, size_t ringBufferSize,
+                             TcpTmTcServer::TcpConfig cfg, size_t receptionBufferSize,
-                             std::string customTcpServerPort, ReceptionModes receptionMode)
+                             size_t ringBufferSize, ReceptionModes receptionMode)
     : SystemObject(objectId),
       tmtcBridgeId(tmtcTcpBridge),
       receptionMode(receptionMode),
-      tcpConfig(std::move(customTcpServerPort)),
+      tcpConfig(cfg),
       receptionBuffer(receptionBufferSize),
       ringBuffer(ringBufferSize, true) {}
 
@@ -91,6 +91,15 @@ ReturnValue_t TcpTmTcServer::initialize() {
     return returnvalue::FAILED;
   }
 
+  if (tcpConfig.reuseAddr) {
+    unsigned int enable = 1;
+    setsockopt(listenerTcpSocket, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(enable));
+  }
+  if (tcpConfig.reusePort) {
+    unsigned int enable = 1;
+    setsockopt(listenerTcpSocket, SOL_SOCKET, SO_REUSEPORT, &enable, sizeof(enable));
+  }
+
   // Bind to the address found by getaddrinfo
   retval = bind(listenerTcpSocket, addrResult->ai_addr, static_cast<int>(addrResult->ai_addrlen));
   if (retval == SOCKET_ERROR) {

src/fsfw/osal/common/TcpTmTcServer.h

@@ -41,11 +41,11 @@ class SpacePacketParser;
  */
 class TcpTmTcServer : public SystemObject, public TcpIpBase, public ExecutableObjectIF {
  public:
-  enum class ReceptionModes { SPACE_PACKETS };
-
   struct TcpConfig {
    public:
-    explicit TcpConfig(std::string tcpPort) : tcpPort(std::move(tcpPort)) {}
+    TcpConfig(bool reuseAddr, bool reusePort) : reuseAddr(reuseAddr), reusePort(reusePort) {}
+    TcpConfig(std::string tcpPort, bool reuseAddr, bool reusePort)
+        : tcpPort(std::move(tcpPort)), reuseAddr(reuseAddr), reusePort(reusePort) {}
 
     /**
      * Passed to the recv call
@@ -63,8 +63,23 @@ class TcpTmTcServer : public SystemObject, public TcpIpBase, public ExecutableOb
      */
     int tcpTmFlags = 0;
 
-    const std::string tcpPort;
+    std::string tcpPort = DEFAULT_SERVER_PORT;
+
+    /**
+     * Sets the SO_REUSEADDR option on the socket. See
+     * https://man7.org/linux/man-pages/man7/socket.7.html for more details. This option is
+     * especially useful in a debugging and development environment where an OBSW image might be
+     * re-flashed oftentimes and where all incoming telecommands are received on a dedicated TCP
+     * port.
+     */
+    bool reuseAddr = false;
+    /**
+     * Sets the SO_REUSEPORT option on the socket. See
+     * https://man7.org/linux/man-pages/man7/socket.7.html for more details.
+     */
+    bool reusePort = false;
   };
+  enum class ReceptionModes { SPACE_PACKETS };
 
   static const std::string DEFAULT_SERVER_PORT;
 
@@ -80,10 +95,9 @@ class TcpTmTcServer : public SystemObject, public TcpIpBase, public ExecutableOb
    *                              size will be the Ethernet MTU size
    * @param customTcpServerPort   The user can specify another port than the default (7301) here.
    */
-  TcpTmTcServer(object_id_t objectId, object_id_t tmtcTcpBridge,
+  TcpTmTcServer(object_id_t objectId, object_id_t tmtcTcpBridge, TcpTmTcServer::TcpConfig cfg,
                 size_t receptionBufferSize = RING_BUFFER_SIZE,
                 size_t ringBufferSize = RING_BUFFER_SIZE,
-                std::string customTcpServerPort = DEFAULT_SERVER_PORT,
                 ReceptionModes receptionMode = ReceptionModes::SPACE_PACKETS);
   ~TcpTmTcServer() override;
 

src/fsfw/osal/freertos/BinSemaphUsingTask.h

@@ -40,7 +40,7 @@ class BinarySemaphoreUsingTask : public SemaphoreIF {
   void refreshTaskHandle();
 
   ReturnValue_t acquire(TimeoutType timeoutType = TimeoutType::BLOCKING,
-                        uint32_t timeoutMs = 0) override;
+                        uint32_t timeoutMs = portMAX_DELAY) override;
   ReturnValue_t release() override;
   uint8_t getSemaphoreCounter() const override;
   static uint8_t getSemaphoreCounter(TaskHandle_t taskHandle);

src/fsfw/osal/freertos/BinarySemaphore.h

@@ -51,7 +51,7 @@ class BinarySemaphore : public SemaphoreIF {
    *         -@c SemaphoreIF::SEMAPHORE_TIMEOUT on timeout
    */
   ReturnValue_t acquire(TimeoutType timeoutType = TimeoutType::BLOCKING,
-                        uint32_t timeoutMs = 0) override;
+                        uint32_t timeoutMs = portMAX_DELAY) override;
 
   /**
    * Same as lockBinarySemaphore() with timeout in FreeRTOS ticks.

src/fsfw/osal/freertos/Clock.cpp

@@ -110,13 +110,11 @@ ReturnValue_t Clock::convertTimeOfDayToTimeval(const TimeOfDay_t* from, timeval*
   time_tm.tm_min = from->minute;
   time_tm.tm_sec = from->second;
 
-  time_tm.tm_isdst = 0;
+  time_t seconds = mktime(&time_tm);
-
-  time_t seconds = timegm(&time_tm);
 
   to->tv_sec = seconds;
   to->tv_usec = from->usecond;
-
+  // Fails in 2038..
   return returnvalue::OK;
 }
 

src/fsfw/osal/freertos/CountingSemaphUsingTask.h

@@ -34,7 +34,7 @@ class CountingSemaphoreUsingTask : public SemaphoreIF {
    *         -@c SemaphoreIF::SEMAPHORE_TIMEOUT on timeout
    */
   ReturnValue_t acquire(TimeoutType timeoutType = TimeoutType::BLOCKING,
-                        uint32_t timeoutMs = 0) override;
+                        uint32_t timeoutMs = portMAX_DELAY) override;
 
   /**
    * Release a semaphore, increasing the number of available counting

src/fsfw/osal/freertos/FixedTimeslotTask.cpp

@@ -56,9 +56,7 @@ ReturnValue_t FixedTimeslotTask::startTask() {
   // start time for the first entry.
   auto slotListIter = pollingSeqTable.current;
 
-  ReturnValue_t result = pollingSeqTable.intializeSequenceAfterTaskCreation();
+  pollingSeqTable.intializeSequenceAfterTaskCreation();
-  // Ignore returnvalue for now
-  static_cast<void>(result);
 
   // The start time for the first entry is read.
   uint32_t intervalMs = slotListIter->pollingTimeMs;

src/fsfw/osal/freertos/Mutex.cpp

@@ -22,7 +22,7 @@ ReturnValue_t Mutex::lockMutex(TimeoutType timeoutType, uint32_t timeoutMs) {
     return MutexIF::MUTEX_NOT_FOUND;
   }
   // If the timeout type is BLOCKING, this will be the correct value.
-  TickType_t timeout = portMAX_DELAY;
+  uint32_t timeout = portMAX_DELAY;
   if (timeoutType == TimeoutType::POLLING) {
     timeout = 0;
   } else if (timeoutType == TimeoutType::WAITING) {

src/fsfw/osal/freertos/TaskManagement.cpp

@@ -3,16 +3,16 @@
 void TaskManagement::vRequestContextSwitchFromTask() { vTaskDelay(0); }
 
 void TaskManagement::requestContextSwitch(CallContext callContext = CallContext::TASK) {
-  //   if (callContext == CallContext::ISR) {
+  if (callContext == CallContext::ISR) {
-  //     // This function depends on the partmacro.h definition for the specific device
+    // This function depends on the partmacro.h definition for the specific device
-  //     vRequestContextSwitchFromISR();
+    vRequestContextSwitchFromISR();
-  //   } else {
+  } else {
-  vRequestContextSwitchFromTask();
+    vRequestContextSwitchFromTask();
-  //   }
+  }
 }
 
 TaskHandle_t TaskManagement::getCurrentTaskHandle() { return xTaskGetCurrentTaskHandle(); }
 
-// size_t TaskManagement::getTaskStackHighWatermark(TaskHandle_t task) {
+size_t TaskManagement::getTaskStackHighWatermark(TaskHandle_t task) {
-//   return uxTaskGetStackHighWaterMark(task) * sizeof(StackType_t);
+  return uxTaskGetStackHighWaterMark(task) * sizeof(StackType_t);
-// }
+}

src/fsfw/osal/freertos/TaskManagement.h

@@ -11,7 +11,7 @@
  * Architecture dependant portmacro.h function call.
  * Should be implemented in bsp.
  */
-// extern "C" void vRequestContextSwitchFromISR();
+extern "C" void vRequestContextSwitchFromISR();
 
 /*!
  * Used by functions to tell if they are being called from
@@ -53,7 +53,7 @@ TaskHandle_t getCurrentTaskHandle();
  * @return Smallest value of stack remaining since the task was started in
  * 		   words.
  */
-// size_t getTaskStackHighWatermark(TaskHandle_t task = nullptr);
+size_t getTaskStackHighWatermark(TaskHandle_t task = nullptr);
 
 };  // namespace TaskManagement
 

src/fsfw/osal/rtems/Clock.cpp

@@ -107,6 +107,9 @@ ReturnValue_t Clock::getDateAndTime(TimeOfDay_t* time) {
   rtems_status_code status = rtems_clock_get_tod(&timeRtems);
   switch (status) {
     case RTEMS_SUCCESSFUL: {
+      /* The last field now contains the RTEMS ticks of the seconds from 0
+      to rtems_clock_get_ticks_per_second() minus one.
+      We calculate the microseconds accordingly */
       time->day = timeRtems.day;
       time->hour = timeRtems.hour;
       time->minute = timeRtems.minute;
@@ -137,7 +140,7 @@ ReturnValue_t Clock::convertTimeOfDayToTimeval(const TimeOfDay_t* from, timeval*
   timeRtems.hour = from->hour;
   timeRtems.minute = from->minute;
   timeRtems.second = from->second;
-  timeRtems.ticks = from->usecond * rtems_clock_get_ticks_per_second() / 1e6;
+  timeRtems.ticks = from->usecond * getTicksPerSecond() / 1e6;
   to->tv_sec = _TOD_To_seconds(&timeRtems);
   to->tv_usec = from->usecond;
   return returnvalue::OK;

src/fsfw/osal/rtems/CpuUsage.cpp

@@ -93,8 +93,8 @@ ReturnValue_t CpuUsage::serialize(uint8_t** buffer, size_t* size, size_t maxSize
                                                        streamEndianness);
 }
 
-size_t CpuUsage::getSerializedSize() const {
+uint32_t CpuUsage::getSerializedSize() const {
-  size_t size = 0;
+  uint32_t size = 0;
 
   size += sizeof(timeSinceLastReset);
   size += SerialArrayListAdapter<ThreadData>::getSerializedSize(&threadData);
@@ -136,8 +136,8 @@ ReturnValue_t CpuUsage::ThreadData::serialize(uint8_t** buffer, size_t* size, si
   return returnvalue::OK;
 }
 
-size_t CpuUsage::ThreadData::getSerializedSize() const {
+uint32_t CpuUsage::ThreadData::getSerializedSize() const {
-  size_t size = 0;
+  uint32_t size = 0;
 
   size += sizeof(id);
   size += MAX_LENGTH_OF_THREAD_NAME;

src/fsfw/osal/rtems/InternalErrorCodes.cpp

@@ -35,9 +35,10 @@ ReturnValue_t InternalErrorCodes::translate(uint8_t code) {
       return OUT_OF_PROXIES;
     case INTERNAL_ERROR_INVALID_GLOBAL_ID:
       return INVALID_GLOBAL_ID;
-    //TODO this one is not there anymore in rtems-6 (5 as well?)
+#ifndef STM32H743ZI_NUCLEO
-    //case INTERNAL_ERROR_BAD_STACK_HOOK:
+    case INTERNAL_ERROR_BAD_STACK_HOOK:
-    //  return BAD_STACK_HOOK;
+      return BAD_STACK_HOOK;
+#endif
       //	case INTERNAL_ERROR_BAD_ATTRIBUTES:
       //		return BAD_ATTRIBUTES;
       //	case INTERNAL_ERROR_IMPLEMENTATION_KEY_CREATE_INCONSISTENCY:

src/fsfw/osal/rtems/SemaphoreFactory.cpp

@@ -1,5 +1,5 @@
 #include "fsfw/osal/rtems/BinarySemaphore.h"
-//#include "fsfw/osal/rtems/CountingSemaphore.h"
+// #include "fsfw/osal/rtems/CountingSemaphore.h"
 
 #include "fsfw/serviceinterface/ServiceInterface.h"
 #include "fsfw/tasks/SemaphoreFactory.h"

src/fsfw/pus/CService200ModeCommanding.cpp

@@ -19,7 +19,7 @@ ReturnValue_t CService200ModeCommanding::isValidSubservice(uint8_t subservice) {
   switch (subservice) {
     case (Subservice::COMMAND_MODE_COMMAND):
     case (Subservice::COMMAND_MODE_READ):
-    case (Subservice::COMMAND_MODE_ANNCOUNCE):
+    case (Subservice::COMMAND_MODE_ANNOUNCE):
       return returnvalue::OK;
     default:
       return AcceptsTelecommandsIF::INVALID_SUBSERVICE;
@@ -53,16 +53,32 @@ ReturnValue_t CService200ModeCommanding::checkInterfaceAndAcquireMessageQueue(
 ReturnValue_t CService200ModeCommanding::prepareCommand(CommandMessage *message, uint8_t subservice,
                                                         const uint8_t *tcData, size_t tcDataLen,
                                                         uint32_t *state, object_id_t objectId) {
-  ModePacket modeCommandPacket;
+  bool recursive = false;
-  ReturnValue_t result =
+  switch (subservice) {
-      modeCommandPacket.deSerialize(&tcData, &tcDataLen, SerializeIF::Endianness::BIG);
+    case (Subservice::COMMAND_MODE_COMMAND): {
-  if (result != returnvalue::OK) {
+      ModePacket modeCommandPacket;
-    return result;
+      ReturnValue_t result =
-  }
+          modeCommandPacket.deSerialize(&tcData, &tcDataLen, SerializeIF::Endianness::BIG);
+      if (result != returnvalue::OK) {
+        return result;
+      }
 
-  ModeMessage::setModeMessage(message, ModeMessage::CMD_MODE_COMMAND, modeCommandPacket.getMode(),
+      ModeMessage::setModeMessage(message, ModeMessage::CMD_MODE_COMMAND,
-                              modeCommandPacket.getSubmode());
+                                  modeCommandPacket.getMode(), modeCommandPacket.getSubmode());
-  return result;
+      return returnvalue::OK;
+    }
+    case (Subservice::COMMAND_MODE_ANNOUNCE_RECURSIVELY):
+      recursive = true;
+      [[fallthrough]];
+    case (Subservice::COMMAND_MODE_ANNOUNCE):
+      ModeMessage::setModeAnnounceMessage(*message, recursive);
+      return EXECUTION_COMPLETE;
+    case (Subservice::COMMAND_MODE_READ):
+      ModeMessage::setModeReadMessage(*message);
+      return returnvalue::OK;
+    default:
+      return CommandingServiceBase::INVALID_SUBSERVICE;
+  }
 }
 
 ReturnValue_t CService200ModeCommanding::handleReply(const CommandMessage *reply,
@@ -73,8 +89,10 @@ ReturnValue_t CService200ModeCommanding::handleReply(const CommandMessage *reply
   ReturnValue_t result = returnvalue::FAILED;
   switch (replyId) {
     case (ModeMessage::REPLY_MODE_REPLY): {
-      result = prepareModeReply(reply, objectId);
+      if (previousCommand != ModeMessage::CMD_MODE_COMMAND) {
-      break;
+        return prepareModeReply(reply, objectId);
+      }
+      return returnvalue::OK;
     }
     case (ModeMessage::REPLY_WRONG_MODE_REPLY): {
       result = prepareWrongModeReply(reply, objectId);

src/fsfw/pus/CService200ModeCommanding.h

@@ -52,7 +52,7 @@ class CService200ModeCommanding : public CommandingServiceBase {
     COMMAND_MODE_READ = 3,
     //!< [EXPORT] : [COMMAND] Trigger an ModeInfo Event.
     //! This command does NOT have a reply
-    COMMAND_MODE_ANNCOUNCE = 4,
+    COMMAND_MODE_ANNOUNCE = 4,
     //!< [EXPORT] : [COMMAND] Trigger a ModeInfo Event and to send this
     //! command to every child. This command does NOT have a reply.
     COMMAND_MODE_ANNOUNCE_RECURSIVELY = 5,

src/fsfw/pus/Service20ParameterManagement.cpp

@@ -69,14 +69,14 @@ ReturnValue_t Service20ParameterManagement::checkInterfaceAndAcquireMessageQueue
 #if FSFW_CPP_OSTREAM_ENABLED == 1
     sif::error << "Service20ParameterManagement::checkInterfaceAndAcquire"
                << "MessageQueue: Can't access object" << std::endl;
-    sif::error << "Object ID: " << std::hex << objectId << std::dec << std::endl;
+    sif::error << "Object ID: 0x" << std::hex << *objectId << std::dec << std::endl;
-    sif::error << "Make sure it implements ReceivesParameterMessagesIF!" << std::endl;
+    sif::error << "Make sure it implements ReceivesParameterMessagesIF" << std::endl;
 #else
     sif::printError(
         "Service20ParameterManagement::checkInterfaceAndAcquire"
         "MessageQueue: Can't access object\n");
     sif::printError("Object ID: 0x%08x\n", *objectId);
-    sif::printError("Make sure it implements ReceivesParameterMessagesIF!\n");
+    sif::printError("Make sure it implements ReceivesParameterMessagesIF\n");
 #endif
 
     return CommandingServiceBase::INVALID_OBJECT;

src/fsfw/pus/Service9TimeManagement.cpp

@@ -1,5 +1,7 @@
 #include "fsfw/pus/Service9TimeManagement.h"
 
+#include <cmath>
+
 #include "fsfw/events/EventManagerIF.h"
 #include "fsfw/pus/servicepackets/Service9Packets.h"
 #include "fsfw/serviceinterface/ServiceInterface.h"
@@ -15,9 +17,17 @@ ReturnValue_t Service9TimeManagement::performService() { return returnvalue::OK;
 
 ReturnValue_t Service9TimeManagement::handleRequest(uint8_t subservice) {
   switch (subservice) {
-    case SUBSERVICE::SET_TIME: {
+    case Subservice::SET_TIME: {
       return setTime();
     }
+    case Subservice::DUMP_TIME: {
+      timeval newTime;
+      Clock::getClock_timeval(&newTime);
+      uint32_t subsecondMs =
+          static_cast<uint32_t>(std::floor(static_cast<double>(newTime.tv_usec) / 1000.0));
+      triggerEvent(CLOCK_DUMP, newTime.tv_sec, subsecondMs);
+      return returnvalue::OK;
+    }
     default:
       return AcceptsTelecommandsIF::INVALID_SUBSERVICE;
   }
@@ -33,14 +43,14 @@ ReturnValue_t Service9TimeManagement::setTime() {
     return result;
   }
 
-  uint32_t formerUptime;
+  timeval time;
-  Clock::getUptime(&formerUptime);
+  Clock::getClock_timeval(&time);
   result = Clock::setClock(&timeToSet);
 
   if (result == returnvalue::OK) {
-    uint32_t newUptime;
+    timeval newTime;
-    Clock::getUptime(&newUptime);
+    Clock::getClock_timeval(&newTime);
-    triggerEvent(CLOCK_SET, newUptime, formerUptime);
+    triggerEvent(CLOCK_SET, time.tv_sec, newTime.tv_sec);
     return returnvalue::OK;
   } else {
     triggerEvent(CLOCK_SET_FAILURE, result, 0);

src/fsfw/pus/Service9TimeManagement.h

@@ -6,10 +6,13 @@
 class Service9TimeManagement : public PusServiceBase {
  public:
   static constexpr uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PUS_SERVICE_9;
-  static constexpr Event CLOCK_SET =
+
-      MAKE_EVENT(0, severity::INFO);  //!< Clock has been set. P1: New Uptime. P2: Old Uptime
+  //!< Clock has been set. P1: old timeval seconds. P2: new timeval seconds.
-  static constexpr Event CLOCK_SET_FAILURE =
+  static constexpr Event CLOCK_SET = MAKE_EVENT(0, severity::INFO);
-      MAKE_EVENT(1, severity::LOW);  //!< Clock could not be set. P1: Returncode.
+  //!< Clock dump event. P1: timeval seconds P2: timeval milliseconds.
+  static constexpr Event CLOCK_DUMP = MAKE_EVENT(1, severity::INFO);
+  //!< Clock could not be set. P1: Returncode.
+  static constexpr Event CLOCK_SET_FAILURE = MAKE_EVENT(2, severity::LOW);
 
   static constexpr uint8_t CLASS_ID = CLASS_ID::PUS_SERVICE_9;
 
@@ -30,8 +33,9 @@ class Service9TimeManagement : public PusServiceBase {
   virtual ReturnValue_t setTime();
 
  private:
-  enum SUBSERVICE {
+  enum Subservice {
-    SET_TIME = 128  //!< [EXPORT] : [COMMAND] Time command in ASCII, CUC or CDS format
+    SET_TIME = 128,  //!< [EXPORT] : [COMMAND] Time command in ASCII, CUC or CDS format
+    DUMP_TIME = 129,
   };
 };
 

src/fsfw/rmap/rmapStructs.h

@@ -10,11 +10,11 @@
 
 //////////////////////////////////////////////////////////////////////////////////
 // RMAP command bits
-//#define RMAP_COMMAND_BIT_INCREMENT	2
+// #define RMAP_COMMAND_BIT_INCREMENT	2
-//#define RMAP_COMMAND_BIT_REPLY		3
+// #define RMAP_COMMAND_BIT_REPLY		3
-//#define RMAP_COMMAND_BIT_WRITE		5
+// #define RMAP_COMMAND_BIT_WRITE		5
-//#define RMAP_COMMAND_BIT_VERIFY		4
+// #define RMAP_COMMAND_BIT_VERIFY		4
-//#define RMAP_COMMAND_BIT			6
+// #define RMAP_COMMAND_BIT			6
 
 namespace RMAPIds {
 
@@ -32,14 +32,14 @@ static const uint8_t RMAP_COMMAND_READ = ((1 << RMAP_COMMAND_BIT) | (1 << RMAP_C
 static const uint8_t RMAP_REPLY_WRITE =
     ((1 << RMAP_COMMAND_BIT_WRITE) | (1 << RMAP_COMMAND_BIT_REPLY));
 static const uint8_t RMAP_REPLY_READ = ((1 << RMAP_COMMAND_BIT_REPLY));
-//#define RMAP_COMMAND_WRITE			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_WRITE)
+// #define RMAP_COMMAND_WRITE			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_WRITE)
 //| (1<<RMAP_COMMAND_BIT_REPLY)) #define RMAP_COMMAND_WRITE_VERIFY	((1<<RMAP_COMMAND_BIT) |
 //(1<<RMAP_COMMAND_BIT_WRITE) | (1<<RMAP_COMMAND_BIT_REPLY) | (1<<RMAP_COMMAND_BIT_VERIFY)) #define
-// RMAP_COMMAND_READ			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_REPLY))
+//  RMAP_COMMAND_READ			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_REPLY))
 
-//#define RMAP_REPLY_WRITE			((1<<RMAP_COMMAND_BIT_WRITE) |
+// #define RMAP_REPLY_WRITE			((1<<RMAP_COMMAND_BIT_WRITE) |
 //(1<<RMAP_COMMAND_BIT_REPLY))
-//#define RMAP_REPLY_WRITE_VERIFY		((1<<RMAP_COMMAND_BIT_WRITE) |
+// #define RMAP_REPLY_WRITE_VERIFY		((1<<RMAP_COMMAND_BIT_WRITE) |
 //(1<<RMAP_COMMAND_BIT_REPLY) | (1<<RMAP_COMMAND_BIT_VERIFY)) #define RMAP_REPLY_READ
 //((1<<RMAP_COMMAND_BIT_REPLY))
 
@@ -49,9 +49,9 @@ static const uint8_t RMAP_COMMAND_HEADER_LEN = 16;
 static const uint8_t RMAP_WRITE_REPLY_HEADER_LEN = 8;
 static const uint8_t RMAP_READ_REPLY_HEADER_LEN = 12;
 static const uint8_t RMAP_DATA_FOOTER_SIZE = 1;  // SIZE OF CRC
-//#define RMAP_COMMAND_HEADER_LEN		16
+// #define RMAP_COMMAND_HEADER_LEN		16
-//#define RMAP_WRITE_REPLY_HEADER_LEN	8
+// #define RMAP_WRITE_REPLY_HEADER_LEN	8
-//#define RMAP_READ_REPLY_HEADER_LEN	12
+// #define RMAP_READ_REPLY_HEADER_LEN	12
 
 }  // namespace RMAPIds
 

src/fsfw/timemanager/CCSDSTime.cpp

@@ -552,7 +552,10 @@ ReturnValue_t CCSDSTime::convertFromCDS(timeval* to, const CCSDSTime::CDS_short*
   if (to == nullptr or from == nullptr) {
     return returnvalue::FAILED;
   }
-  int32_t days = (from->dayMSB << 8) + from->dayLSB;
+  uint16_t days = (from->dayMSB << 8) + from->dayLSB;
+  if (days <= DAYS_CCSDS_TO_UNIX_EPOCH) {
+    return INVALID_TIME_FORMAT;
+  }
   days -= DAYS_CCSDS_TO_UNIX_EPOCH;
   to->tv_sec = days * SECONDS_PER_DAY;
   uint32_t msDay =

src/fsfw/timemanager/CdsShortTimeStamper.cpp

@@ -4,6 +4,8 @@
 
 #include "fsfw/timemanager/Clock.h"
 
+CdsShortTimeStamper::CdsShortTimeStamper() : SystemObject(0, false) {}
+
 CdsShortTimeStamper::CdsShortTimeStamper(object_id_t objectId) : SystemObject(objectId) {}
 
 ReturnValue_t CdsShortTimeStamper::serialize(uint8_t **buffer, size_t *size, size_t maxSize,

src/fsfw/timemanager/CdsShortTimeStamper.h

@@ -18,6 +18,7 @@
 class CdsShortTimeStamper : public TimeWriterIF, public TimeReaderIF, public SystemObject {
  public:
   static constexpr size_t TIMESTAMP_LEN = 7;
+  CdsShortTimeStamper();
   /**
    * @brief   Default constructor which also registers the time stamper as a
    *          system object so it can be found with the #objectManager.

src/fsfw/timemanager/TimeReaderIF.h

@@ -3,8 +3,6 @@
 
 #include <cstdio>
 #include <cstdlib>
-#include <sys/time.h>
-
 
 #include "fsfw/platform.h"
 

src/fsfw/tmtcpacket/pus/tc/PusTcCreator.cpp

@@ -100,5 +100,6 @@ ReturnValue_t PusTcCreator::setSerializableUserData(const SerializeIF &serializa
 void PusTcCreator::setup() {
   spCreator.setPacketType(ccsds::PacketType::TC);
   spCreator.setSecHeaderFlag();
+  spCreator.setSeqFlags(ccsds::SequenceFlags::UNSEGMENTED);
   updateSpLengthField();
 }

src/fsfw/tmtcpacket/pus/tm/PusTmCreator.cpp

@@ -119,6 +119,7 @@ void PusTmCreator::setup() {
   updateSpLengthField();
   spCreator.setPacketType(ccsds::PacketType::TM);
   spCreator.setSecHeaderFlag();
+  spCreator.setSeqFlags(ccsds::SequenceFlags::UNSEGMENTED);
 }
 
 void PusTmCreator::setMessageTypeCounter(uint16_t messageTypeCounter) {

src/fsfw/tmtcservices/TmTcBridge.cpp

@@ -16,7 +16,9 @@ TmTcBridge::TmTcBridge(const char* name, object_id_t objectId, object_id_t tcDes
       tcDestination(tcDestination)
 
 {
-  tmTcReceptionQueue = QueueFactory::instance()->createMessageQueue(TMTC_RECEPTION_QUEUE_DEPTH);
+  auto mqArgs = MqArgs(objectId, static_cast<void*>(this));
+  tmTcReceptionQueue = QueueFactory::instance()->createMessageQueue(
+      TMTC_RECEPTION_QUEUE_DEPTH, MessageQueueMessage::MAX_MESSAGE_SIZE, &mqArgs);
 }
 
 TmTcBridge::~TmTcBridge() { QueueFactory::instance()->deleteMessageQueue(tmTcReceptionQueue); }
@@ -35,7 +37,7 @@ ReturnValue_t TmTcBridge::setNumberOfSentPacketsPerCycle(uint8_t sentPacketsPerC
   }
 }
 
-ReturnValue_t TmTcBridge::setMaxNumberOfPacketsStored(uint8_t maxNumberOfPacketsStored) {
+ReturnValue_t TmTcBridge::setMaxNumberOfPacketsStored(unsigned int maxNumberOfPacketsStored) {
   if (maxNumberOfPacketsStored <= LIMIT_DOWNLINK_PACKETS_STORED) {
     this->maxNumberOfPacketsStored = maxNumberOfPacketsStored;
     return returnvalue::OK;
@@ -143,13 +145,17 @@ ReturnValue_t TmTcBridge::handleTmQueue() {
 #endif /* FSFW_VERBOSE_LEVEL >= 3 */
 
     if (communicationLinkUp == false or packetSentCounter >= sentPacketsPerCycle) {
-      storeDownlinkData(&message);
+      ReturnValue_t result = storeDownlinkData(&message);
+      if (result != returnvalue::OK) {
+        tmStore->deleteData(message.getStorageId());
+      }
       continue;
     }
 
     result = tmStore->getData(message.getStorageId(), &data, &size);
     if (result != returnvalue::OK) {
       status = result;
+      tmStore->deleteData(message.getStorageId());
       continue;
     }
 
@@ -157,9 +163,9 @@ ReturnValue_t TmTcBridge::handleTmQueue() {
     if (result != returnvalue::OK) {
       status = result;
     } else {
-      tmStore->deleteData(message.getStorageId());
       packetSentCounter++;
     }
+    tmStore->deleteData(message.getStorageId());
   }
   return status;
 }
@@ -171,15 +177,18 @@ ReturnValue_t TmTcBridge::storeDownlinkData(TmTcMessage* message) {
   }
 
   if (tmFifo->full()) {
+    if (warningSwitch) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
-    sif::warning << "TmTcBridge::storeDownlinkData: TM downlink max. number "
+      sif::warning << "TmTcBridge::storeDownlinkData: TM downlink max. number "
-                    "of stored packet IDs reached!"
+                      "of stored packet IDs reached!"
-                 << std::endl;
+                   << std::endl;
 #else
-    sif::printWarning(
+      sif::printWarning(
-        "TmTcBridge::storeDownlinkData: TM downlink max. number "
+          "TmTcBridge::storeDownlinkData: TM downlink max. number "
-        "of stored packet IDs reached!\n");
+          "of stored packet IDs reached!\n");
 #endif
+      warningSwitch = false;
+    }
     if (overwriteOld) {
       tmFifo->retrieve(&storeId);
       tmStore->deleteData(storeId);
@@ -221,6 +230,7 @@ ReturnValue_t TmTcBridge::handleStoredTm() {
     packetSentCounter++;
 
     if (tmFifo->empty()) {
+      warningSwitch = true;
       tmStored = false;
     }
     tmStore->deleteData(storeId);

src/fsfw/tmtcservices/TmTcBridge.h

@@ -17,7 +17,7 @@ class TmTcBridge : public AcceptsTelemetryIF,
  public:
   static constexpr uint8_t TMTC_RECEPTION_QUEUE_DEPTH = 20;
   static constexpr uint8_t LIMIT_STORED_DATA_SENT_PER_CYCLE = 15;
-  static constexpr uint8_t LIMIT_DOWNLINK_PACKETS_STORED = 200;
+  static constexpr unsigned int LIMIT_DOWNLINK_PACKETS_STORED = 500;
 
   static constexpr uint8_t DEFAULT_STORED_DATA_SENT_PER_CYCLE = 5;
   static constexpr uint8_t DEFAULT_DOWNLINK_PACKETS_STORED = 10;
@@ -42,7 +42,7 @@ class TmTcBridge : public AcceptsTelemetryIF,
    * @return -@c returnvalue::OK if value was set successfully
    *         -@c returnvalue::FAILED otherwise, stored value stays the same
    */
-  ReturnValue_t setMaxNumberOfPacketsStored(uint8_t maxNumberOfPacketsStored);
+  ReturnValue_t setMaxNumberOfPacketsStored(unsigned int maxNumberOfPacketsStored);
 
   /**
    * This will set up the bridge to overwrite old data in the FIFO.
@@ -91,6 +91,7 @@ class TmTcBridge : public AcceptsTelemetryIF,
   //! by default, so telemetry will be handled immediately.
   bool communicationLinkUp = true;
   bool tmStored = false;
+  bool warningSwitch = true;
   bool overwriteOld = true;
   uint8_t packetSentCounter = 0;
 
@@ -152,7 +153,7 @@ class TmTcBridge : public AcceptsTelemetryIF,
    */
   DynamicFIFO<store_address_t>* tmFifo = nullptr;
   uint8_t sentPacketsPerCycle = DEFAULT_STORED_DATA_SENT_PER_CYCLE;
-  uint8_t maxNumberOfPacketsStored = DEFAULT_DOWNLINK_PACKETS_STORED;
+  unsigned int maxNumberOfPacketsStored = DEFAULT_DOWNLINK_PACKETS_STORED;
 };
 
 #endif /* FSFW_TMTCSERVICES_TMTCBRIDGE_H_ */

src/fsfw_hal/devicehandlers/MgmRM3100Handler.cpp

@@ -325,12 +325,12 @@ ReturnValue_t MgmRM3100Handler::handleDataReadout(const uint8_t *packet) {
   // trickery here to calculate the raw values first
   int32_t fieldStrengthRawX = ((packet[1] << 24) | (packet[2] << 16) | (packet[3] << 8)) >> 8;
   int32_t fieldStrengthRawY = ((packet[4] << 24) | (packet[5] << 16) | (packet[6] << 8)) >> 8;
-  int32_t fieldStrengthRawZ = ((packet[7] << 24) | (packet[8] << 16) | (packet[3] << 8)) >> 8;
+  int32_t fieldStrengthRawZ = ((packet[7] << 24) | (packet[8] << 16) | (packet[9] << 8)) >> 8;
 
   // Now scale to physical value in microtesla
   float fieldStrengthX = fieldStrengthRawX * scaleFactorX;
-  float fieldStrengthY = fieldStrengthRawY * scaleFactorX;
+  float fieldStrengthY = fieldStrengthRawY * scaleFactorY;
-  float fieldStrengthZ = fieldStrengthRawZ * scaleFactorX;
+  float fieldStrengthZ = fieldStrengthRawZ * scaleFactorZ;
 
   if (periodicPrintout) {
     if (debugDivider.checkAndIncrement()) {

src/fsfw_hal/linux/i2c/I2cComIF.cpp

@@ -180,10 +180,6 @@ ReturnValue_t I2cComIF::requestReceiveMessage(CookieIF* cookie, size_t requestLe
     }
 #else
 #endif
-#endif
-#if FSFW_CPP_OSTREAM_ENABLED == 1
-    sif::debug << "I2cComIF::requestReceiveMessage: Read " << readLen << " of " << requestLen
-               << " bytes" << std::endl;
 #endif
     return returnvalue::FAILED;
   }

unittests/CMakeLists.txt

@@ -20,9 +20,7 @@ add_subdirectory(globalfunctions)
 add_subdirectory(timemanager)
 add_subdirectory(tmtcpacket)
 add_subdirectory(cfdp)
-IF(NOT FSFW_OSAL MATCHES "rtems")
 add_subdirectory(hal)
-ENDIF()
 add_subdirectory(internalerror)
 add_subdirectory(devicehandler)
 add_subdirectory(tmtcservices)

unittests/CatchRunner.cpp

@@ -10,120 +10,16 @@
 
 #define CATCH_CONFIG_COLOUR_WINDOWS
 
-#include <fsfw/osal/osal.h>
-
 #include <catch2/catch_session.hpp>
 
-#ifdef FSFW_OSAL_FREERTOS
-#include <FreeRTOS.h>
-
-#include "task.h"
-#endif
-
 extern int customSetup();
 extern int customTeardown();
 
-#ifdef FSFW_OSAL_FREERTOS
-struct Taskparameters {
-  int argc;
-  char** argv;
-  TaskHandle_t catchTask;
-} taskParameters;
-
-void unittestTaskFunction(void* pvParameters) {
-  Taskparameters* parameters = (Taskparameters*)pvParameters;
-
-  int result = Catch::Session().run(parameters->argc, parameters->argv);
-
-  vTaskDelay(pdMS_TO_TICKS(10));
-  vTaskSuspendAll();
-  vTaskDelete(parameters->catchTask);
-  customTeardown();
-  exit(result);
-}
-#endif
-
-#ifdef FSFW_OSAL_RTEMS
-#include <signal.h>
-
-int sigaltstack(const stack_t* ss, stack_t* old_ss) { return 0; }
-extern "C" {
-
-void exit_qemu_failing(int error) {
-  asm(/* 0x20026 == ADP_Stopped_ApplicationExit */
-         "mov x1, #0x26\n\t"
-        "movk x1, #2, lsl #16\n\t"
-        "str x1, [sp,#0]\n\t");
-
-    /* Exit status code. Host QEMU process exits with that status. */
-    asm("mov x0, %[error]\n\t" : : [error] "r" (error));
-    asm(
-        "str x0, [sp,#8]\n\t"
-
-    /* x1 contains the address of parameter block.
-     * Any memory address could be used. */
-        "mov x1, sp\n\t"
-
-    /* SYS_EXIT */
-        "mov w0, #0x18\n\t"
-
-    /* Do the semihosting call on A64. */
-        "hlt 0xf000\n\t"
-);
-}
-
-#include "testcfg/rtems/rtemsConfig.h"
-
-void user_handle_fatal(Internal_errors_Source source, bool internal,  Internal_errors_t error_code){
-  if ( source == RTEMS_FATAL_SOURCE_EXIT ) {
-    if (error_code != 0) {
-      printk("*** EXIT STATUS NOT ZERO ***\n");
-      printk("Quitting qemu with exit code %i\n", error_code);
-      exit_qemu_failing(error_code);
-    }
-  }
-}
-
-rtems_task Init(rtems_task_argument ignored) {
-  rtems_time_of_day now;
-  now.year = 2023;
-  now.month = 1;
-  now.day = 15;
-  now.hour = 0;
-  now.minute = 0;
-  now.second = 0;
-  now.ticks = 0;
-  rtems_clock_set(&now);
-  customSetup();
-  const char* argv[] = {"fsfw-test", ""};
-  int result = Catch::Session().run(1, argv);
-  customTeardown();
-  exit(result);
-}
-}
-#endif
-
 int main(int argc, char* argv[]) {
   customSetup();
 
-  int result = 0;
-
-#ifdef FSFW_OSAL_FREERTOS
-  xTaskCreate(
-      unittestTaskFunction, /* The function that implements the task. */
-      "Unittests", /* The text name assigned to the task - for debug only as it is not used by the
-                      kernel. */
-      configMINIMAL_STACK_SIZE, /* The size of the stack to allocate to the task. */
-      &taskParameters, /* The parameter passed to the task - not used in this simple case. */
-      1,               /* The priority assigned to the task. */
-      &taskParameters.catchTask); /* The task handle is not required, so NULL is passed. */
-  taskParameters.argc = argc;
-  taskParameters.argv = argv;
-  vTaskStartScheduler();
-#else
   // Catch internal function call
-  result = Catch::Session().run(argc, argv);
+  int result = Catch::Session().run(argc, argv);
-#endif
 
   // global clean-up
   customTeardown();

unittests/osal/TestClock.cpp

@@ -1,6 +1,5 @@
 #include <fsfw/globalfunctions/timevalOperations.h>
 #include <fsfw/timemanager/Clock.h>
-#include <stdio.h>
 
 #include <array>
 #include <catch2/catch_approx.hpp>
@@ -8,8 +7,6 @@
 
 #include "CatchDefinitions.h"
 
-//TODO setClock()
-
 TEST_CASE("OSAL::Clock Test", "[OSAL::Clock Test]") {
   SECTION("Test getClock") {
     timeval time;
@@ -24,14 +21,7 @@ TEST_CASE("OSAL::Clock Test", "[OSAL::Clock Test]") {
     // We require timeOfDayAsTimeval to be larger than time as it
     // was request a few ns later
     double difference = timevalOperations::toDouble(timeOfDayAsTimeval - time);
-    uint32_t ticksPerSecond =Clock:: getTicksPerSecond();
+    CHECK(difference >= 0.0);
-    float secondPerTick = 0;
-    if (ticksPerSecond != 0){
-      secondPerTick = 1.0 / ticksPerSecond;
-    }
-    // In rtems, timevals have microsecond resolution, while TOD has only tick resolution, leading to
-    // negative differences when comparing "equal" times
-    CHECK(difference >= -secondPerTick);
     CHECK(difference <= 0.005);
 
     // Conversion in the other direction

unittests/osal/TestSemaphore.cpp

@@ -5,7 +5,7 @@
 #include <catch2/catch_test_macros.hpp>
 
 // binary semaphores currently only supported on linux
-#if defined(FSFW_OSAL_LINUX) || defined(FSFW_OSAL_FREERTOS)
+#ifdef FSFW_OSAL_LINUX
 
 TEST_CASE("Binary Semaphore Test", "[BinSemaphore]") {
   // perform set-up here

unittests/testcfg/devices/logicalAddresses.h

@@ -7,7 +7,7 @@
 
 namespace addresses {
 /* Logical addresses have uint32_t datatype */
-enum logicalAddresses : address_t {};
+enum LogicAddress : address_t {};
 }  // namespace addresses
 
 #endif /* CONFIG_DEVICES_LOGICALADDRESSES_H_ */

unittests/testcfg/freertos/FreeRTOSConfig.h

@@ -1,102 +0,0 @@
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-#define configUSE_PREEMPTION 1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
-#define configUSE_TICKLESS_IDLE 0
-#define configTICK_RATE_HZ 1000
-#define configMAX_PRIORITIES 5
-#define configMINIMAL_STACK_SIZE ((unsigned short)PTHREAD_STACK_MIN)
-#define configMAX_TASK_NAME_LEN 16
-#define configUSE_16_BIT_TICKS 0
-#define configIDLE_SHOULD_YIELD 1
-#define configUSE_TASK_NOTIFICATIONS 1
-#define configTASK_NOTIFICATION_ARRAY_ENTRIES 3
-#define configUSE_MUTEXES 1
-#define configUSE_RECURSIVE_MUTEXES 0
-#define configUSE_COUNTING_SEMAPHORES 1
-#define configUSE_ALTERNATIVE_API 0 /* Deprecated! */
-#define configQUEUE_REGISTRY_SIZE 20
-#define configUSE_QUEUE_SETS 0
-#define configUSE_TIME_SLICING 0
-#define configUSE_NEWLIB_REENTRANT 0
-#define configENABLE_BACKWARD_COMPATIBILITY 1
-#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 5
-#define configUSE_MINI_LIST_ITEM 1
-#define configSTACK_DEPTH_TYPE uint16_t
-#define configMESSAGE_BUFFER_LENGTH_TYPE size_t
-#define configHEAP_CLEAR_MEMORY_ON_FREE 1
-
-/* Memory allocation related definitions. */
-#define configSUPPORT_STATIC_ALLOCATION 0
-#define configSUPPORT_DYNAMIC_ALLOCATION 1
-#define configTOTAL_HEAP_SIZE ((size_t)(1024 * 1024))
-#define configAPPLICATION_ALLOCATED_HEAP 1
-#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0
-
-/* Hook function related definitions. */
-#define configUSE_IDLE_HOOK 0
-#define configUSE_TICK_HOOK 0
-#define configCHECK_FOR_STACK_OVERFLOW 0
-#define configUSE_MALLOC_FAILED_HOOK 0
-#define configUSE_DAEMON_TASK_STARTUP_HOOK 0
-#define configUSE_SB_COMPLETED_CALLBACK 0
-
-/* Run time and task stats gathering related definitions. */
-#define configGENERATE_RUN_TIME_STATS 0
-#define configUSE_TRACE_FACILITY 0
-#define configUSE_STATS_FORMATTING_FUNCTIONS 0
-
-/* Co-routine related definitions. */
-#define configUSE_CO_ROUTINES 0
-#define configMAX_CO_ROUTINE_PRIORITIES 1
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS 1
-#define configTIMER_TASK_PRIORITY 3
-#define configTIMER_QUEUE_LENGTH 10
-#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE
-
-/* Interrupt nesting behaviour configuration. */
-#define configKERNEL_INTERRUPT_PRIORITY [dependent of processor]
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY [dependent on processor and application]
-#define configMAX_API_CALL_INTERRUPT_PRIORITY [dependent on processor and application]
-
-/* Define to trap errors during development. */
-//#define configASSERT( ( x ) ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ )
-
-/* FreeRTOS MPU specific definitions. */
-#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0
-#define configTOTAL_MPU_REGIONS 8    /* Default value. */
-#define configTEX_S_C_B_FLASH 0x07UL /* Default value. */
-#define configTEX_S_C_B_SRAM 0x07UL  /* Default value. */
-#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 1
-#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 1
-#define configENABLE_ERRATA_837070_WORKAROUND 1
-
-/* ARMv8-M secure side port related definitions. */
-#define secureconfigMAX_SECURE_CONTEXTS 5
-
-/* Optional functions - most linkers will remove unused functions anyway. */
-#define INCLUDE_vTaskPrioritySet 1
-#define INCLUDE_uxTaskPriorityGet 1
-#define INCLUDE_vTaskDelete 1
-#define INCLUDE_vTaskSuspend 1
-#define INCLUDE_xResumeFromISR 1
-#define INCLUDE_vTaskDelayUntil 1
-#define INCLUDE_vTaskDelay 1
-#define INCLUDE_xTaskGetSchedulerState 1
-#define INCLUDE_xTaskGetCurrentTaskHandle 1
-#define INCLUDE_uxTaskGetStackHighWaterMark 0
-#define INCLUDE_uxTaskGetStackHighWaterMark2 0
-#define INCLUDE_xTaskGetIdleTaskHandle 0
-#define INCLUDE_eTaskGetState 0
-#define INCLUDE_xEventGroupSetBitFromISR 1
-#define INCLUDE_xTimerPendFunctionCall 0
-#define INCLUDE_xTaskAbortDelay 0
-#define INCLUDE_xTaskGetHandle 0
-#define INCLUDE_xTaskResumeFromISR 1
-
-/* A header file that defines trace macro can be included here. */
-
-#endif /* FREERTOS_CONFIG_H */

unittests/testcfg/rtems/cmake/Platform/a72_lp64_qemu.cmake

@@ -1,3 +0,0 @@
-add_compile_options("-mcpu=cortex-a72" "-I/opt/rtems/6/aarch64-rtems6/a72_lp64_qemu/lib/include" "-I${CMAKE_SOURCE_DIR}/unittests/testcfg/rtems/include")
-
-add_link_options("-B/opt/rtems/6/aarch64-rtems6/a72_lp64_qemu/lib" "-qrtems")

unittests/testcfg/rtems/cmake/aarch64-rtems6-toolchain.cmake

@@ -1,25 +0,0 @@
-# the name of the target operating system
-set(CMAKE_SYSTEM_NAME a72_lp64_qemu)
-
-set(CMAKE_SYSTEM_PROCESSOR a72)
-
-# which compilers to use for C and C++
-set(CMAKE_C_COMPILER   aarch64-rtems6-gcc)
-set(CMAKE_CXX_COMPILER aarch64-rtems6-g++)
-
-set(CMAKE_C_COMPILER_WORKS 1)
-set(CMAKE_CXX_COMPILER_WORKS 1)
-
-# adjust the default behavior of the FIND_XXX() commands:
-# search programs in the host environment
-set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
-
-# search headers and libraries in the target environment
-set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
-set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
-
-# supress errors
-add_compile_definitions("__STDC_VERSION__")
-
-list(APPEND CMAKE_MODULE_PATH
-     "${CMAKE_CURRENT_SOURCE_DIR}/unittests/testcfg/rtems/cmake")

unittests/testcfg/rtems/include/cmath

@@ -1,39 +0,0 @@
-#pragma once
-
-#include_next <cmath>
-
-extern "C++"
-{
-namespace std _GLIBCXX_VISIBILITY(default)
-{
-
-#undef lround
-#undef erfc
-#undef round
-
-
-using ::lround;
-
-long
-  lround(float __x);
-
-  constexpr long
-  lround(long double __x);
-
-using ::erfc;
-  
-constexpr float
-  erfc(float __x);
-
-  constexpr long double
-  erfc(long double __x);
-  
-  constexpr float
-  round(float __x);
-
-  using ::round;
-  
-  constexpr long double
-  round(long double __x);
-}
-}

unittests/testcfg/rtems/rtemsConfig.h

@@ -1,32 +0,0 @@
-#pragma once
-
-
-#include <rtems/extension.h>
-#include <rtems/bspIo.h>
-void user_handle_fatal(Internal_errors_Source source, bool internal,  Internal_errors_t error_code);
-
-#define RTEMS_USE_UNLIMITED_OBJECTS_ALLOCATION 0
-
-#define CONFIGURE_MICROSECONDS_PER_TICK 1000
-
-#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
-
-#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
-#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
-
-#define CONFIGURE_MAXIMUM_TASKS 20
-#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES 30
-#define CONFIGURE_MAXIMUM_SEMAPHORES 20
-#define CONFIGURE_MAXIMUM_TIMERS 10
-//! Required for Rate-Monotonic Scheduling (RMS)
-#define CONFIGURE_MAXIMUM_PERIODS 15
-#define CONFIGURE_INIT_TASK_STACK_SIZE (RTEMS_MINIMUM_STACK_SIZE * 6)
-//! Around 41 kB extra task stack for now.
-#define CONFIGURE_EXTRA_TASK_STACKS (10 * RTEMS_MINIMUM_STACK_SIZE)
-
-#define CONFIGURE_INITIAL_EXTENSIONS { NULL, NULL, NULL, NULL, NULL, NULL, NULL, user_handle_fatal, NULL }
-
-#define CONFIGURE_INIT
-
-#include <rtems.h>
-#include <rtems/confdefs.h>