cleaned up event handling code a bit

Reviewed-on: #271

CHANGELOG.md

@@ -10,9 +10,32 @@ list yields a list of all related PRs for each release.
 
 # [unreleased]
 
+# [v5.13.0] 2024-01-30
+
 ## Added
 
+- Added new parameter commands for PLOC MPSoC to skip SUPV commanding.
+
+# [v5.12.1] 2023-12-13
+
+## Added
+
+- A few new commands to test the TC scheduler.
+
+# [v5.12.0] 2023-12-06
+
+## Added
+
+- New ACS controller commands.
+
+# [v5.11.0] 2023-11-30
+
+## Added
+
+- Added new commands to disable channel order checks partially for the payload PCDU normal modes.
 - Core controller auto switch enable and disable command.
+- Star Tracker JSON reload command. Reboot still required.
+- PLOC SUPV ADC and Counters report TM handling.
 
 # [v5.10.1] 2023-10-27
 

eive_tmtc/config/events.csv

@@ -88,14 +88,16 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 10804;0x2a34;FILENAME_TOO_LARGE_ERROR;LOW;P1: Transaction step ID, P2: 0 for source file name, 1 for dest file name;fsfw/src/fsfw/cfdp/handler/defs.h
 10805;0x2a35;HANDLING_CFDP_REQUEST_FAILED;LOW;CFDP request handling failed. P2: Returncode.;fsfw/src/fsfw/cfdp/handler/defs.h
 11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;The limits for the rotation in safe mode were violated.;mission/acs/defs.h
-11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;The system has recovered from a safe rate rotation violation.;mission/acs/defs.h
+11201;0x2bc1;RATE_RECOVERY;MEDIUM;The system has recovered from a rate rotation violation.;mission/acs/defs.h
 11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;Multiple RWs are invalid, uncommandable and therefore higher ACS modes cannot be maintained.;mission/acs/defs.h
 11203;0x2bc3;MEKF_INVALID_INFO;INFO;MEKF was not able to compute a solution. P1: MEKF state on exit;mission/acs/defs.h
 11204;0x2bc4;MEKF_RECOVERY;INFO;MEKF is able to compute a solution again.;mission/acs/defs.h
 11205;0x2bc5;MEKF_AUTOMATIC_RESET;INFO;MEKF performed an automatic reset after detection of nonfinite values.;mission/acs/defs.h
-11206;0x2bc6;MEKF_INVALID_MODE_VIOLATION;HIGH;MEKF was not able to compute a solution during any pointing ACS mode for a prolonged time.;mission/acs/defs.h
+11206;0x2bc6;PTG_CTRL_NO_ATTITUDE_INFORMATION;HIGH;For a prolonged time, no attitude information was available for the Pointing Controller. Falling back to Safe Mode.;mission/acs/defs.h
 11207;0x2bc7;SAFE_MODE_CONTROLLER_FAILURE;HIGH;The ACS safe mode controller was not able to compute a solution and has failed. P1: Missing information about magnetic field, P2: Missing information about rotational rate;mission/acs/defs.h
 11208;0x2bc8;TLE_TOO_OLD;INFO;The TLE for the SGP4 Propagator has become too old.;mission/acs/defs.h
+11209;0x2bc9;TLE_FILE_READ_FAILED;LOW;The TLE could not be read from the filesystem.;mission/acs/defs.h
+11210;0x2bca;PTG_RATE_VIOLATION;MEDIUM;The limits for the rotation in pointing mode were violated.;mission/acs/defs.h
 11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/power/defs.h
 11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/power/defs.h
 11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/power/defs.h
@@ -143,14 +145,16 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 11901;0x2e7d;BOOTING_FIRMWARE_FAILED_EVENT;LOW;Failed to boot firmware;mission/acs/str/StarTrackerHandler.h
 11902;0x2e7e;BOOTING_BOOTLOADER_FAILED_EVENT;LOW;Failed to boot star tracker into bootloader mode;mission/acs/str/StarTrackerHandler.h
 11903;0x2e7f;COM_ERROR_REPLY_RECEIVED;LOW;Received COM error. P1:  Communication Error ID (datasheet p32);mission/acs/str/StarTrackerHandler.h
-12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/payload/PlocSupervisorHandler.h
-12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/payload/PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/payload/PlocSupervisorHandler.h
-12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/payload/PlocSupervisorHandler.h
-12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/payload/PlocSupervisorHandler.h
-12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/payload/PlocSupervisorHandler.h
-12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/payload/PlocSupervisorHandler.h
-12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/payload/PlocSupervisorHandler.h
+12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/payload/plocSupvDefs.h
+12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/payload/plocSupvDefs.h
+12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/payload/plocSupvDefs.h
+12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/payload/plocSupvDefs.h
+12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/payload/plocSupvDefs.h
+12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/payload/plocSupvDefs.h
+12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/payload/plocSupvDefs.h
+12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/payload/plocSupvDefs.h
+12009;0x2ee9;SUPV_ACK_UNKNOWN_COMMAND;LOW;Received ACK, but no related command is unknown or has not been sent  by this software instance. P1: Module APID. P2: Service ID.;linux/payload/plocSupvDefs.h
+12010;0x2eea;SUPV_EXE_ACK_UNKNOWN_COMMAND;LOW;Received ACK EXE, but no related command is unknown or has not been sent  by this software instance. P1: Module APID. P2: Service ID.;linux/payload/plocSupvDefs.h
 12100;0x2f44;SANITIZATION_FAILED;LOW;No description;bsp_q7s/fs/SdCardManager.h
 12101;0x2f45;MOUNTED_SD_CARD;INFO;No description;bsp_q7s/fs/SdCardManager.h
 12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/payload/PlocMemoryDumper.h

eive_tmtc/config/object_ids.py

@@ -167,6 +167,9 @@ NOT_OK_TM_STORE = bytes([0x73, 0x02, 0x00, 0x03])
 HK_TM_STORE = bytes([0x73, 0x02, 0x00, 0x04])
 CFDP_TM_STORE = bytes([0x73, 0x03, 0x00, 0x00])
 
+
+SUPV_FILTER_SET = [PLOC_SUPV_ID, PDU_2_HANDLER_ID, PDU_1_HANDLER_ID]
+
 ObjectIdDict = Dict[bytes, ObjectIdU32]
 
 

eive_tmtc/config/returnvalues.csv

@@ -387,6 +387,7 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x4304;PUS11_InvalidRelativeTime;No description;4;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4305;PUS11_ContainedTcTooSmall;No description;5;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4306;PUS11_ContainedTcCrcMissmatch;No description;6;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4307;PUS11_MapIsFull;No description;7;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4400;FILS_GenericFileError;No description;0;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
 0x4401;FILS_GenericDirError;No description;1;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
 0x4402;FILS_FilesystemInactive;No description;2;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
@@ -453,6 +454,12 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x5208;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/acs/imtqHelpers.h
 0x5209;IMTQ_StartupCfgError;No description;9;IMTQ_HANDLER;mission/acs/imtqHelpers.h
 0x520a;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;10;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x53a0;RWHA_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;RW_HANDLER;mission/acs/RwHandler.h
+0x53a1;RWHA_InvalidRampTime;Action Message with invalid ramp time was received.;161;RW_HANDLER;mission/acs/RwHandler.h
+0x53a2;RWHA_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;RW_HANDLER;mission/acs/RwHandler.h
+0x53a3;RWHA_ExecutionFailed;Command execution failed;163;RW_HANDLER;mission/acs/RwHandler.h
+0x53a4;RWHA_CrcError;Reaction wheel reply has invalid crc;164;RW_HANDLER;mission/acs/RwHandler.h
+0x53a5;RWHA_ValueNotRead;No description;165;RW_HANDLER;mission/acs/RwHandler.h
 0x53b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/acs/rwHelpers.h
 0x53b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/acs/rwHelpers.h
 0x53b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/acs/rwHelpers.h
@@ -498,12 +505,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x58a1;PLSPVhLP_ProcessTerminated;Process has been terminated by command;161;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
 0x58a2;PLSPVhLP_PathNotExists;Received command with invalid pathname;162;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
 0x58a3;PLSPVhLP_EventBufferReplyInvalidApid;Expected event buffer TM but received space packet with other APID;163;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
-0x59a0;SUSS_InvalidSpeed;Action Message with invalid speed was received. Valid speeds must be in the range of [-65000, 1000] or [1000, 65000];160;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a1;SUSS_InvalidRampTime;Action Message with invalid ramp time was received.;161;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a2;SUSS_SetSpeedCommandInvalidLength;Received set speed command has invalid length. Should be 6.;162;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a3;SUSS_ExecutionFailed;Command execution failed;163;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a4;SUSS_CrcError;Reaction wheel reply has invalid crc;164;SUS_HANDLER;mission/acs/RwHandler.h
-0x59a5;SUSS_ValueNotRead;No description;165;SUS_HANDLER;mission/acs/RwHandler.h
+0x59a0;SUSS_ErrorUnlockMutex;No description;160;SUS_HANDLER;mission/acs/archive/LegacySusHandler.h
+0x59a1;SUSS_ErrorLockMutex;No description;161;SUS_HANDLER;mission/acs/archive/LegacySusHandler.h
 0x5aa0;IPCI_PapbBusy;No description;160;CCSDS_IP_CORE_BRIDGE;linux/ipcore/PapbVcInterface.h
 0x5ba0;PTME_UnknownVcId;No description;160;PTME;linux/ipcore/Ptme.h
 0x5d01;STRHLP_SdNotMounted;SD card specified in path string not mounted;1;STR_HELPER;linux/acs/StrComHandler.h
@@ -592,7 +595,11 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x69b5;SPVRTVIF_SupvHelperExecuting;Supervisor helper task ist currently executing a command (wait until helper tas has finished or interrupt by sending the terminate command);181;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
 0x69c0;SPVRTVIF_BufTooSmall;No description;192;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
 0x69c1;SPVRTVIF_NoReplyTimeout;No description;193;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
-0x6a00;ACSCTRL_FileDeletionFailed;File deletion failed and at least one file is still existent.;0;ACS_CTRL;mission/controller/AcsController.h
+0x6aa0;ACSCTRL_FileDeletionFailed;File deletion failed and at least one file is still existent.;160;ACS_CTRL;mission/controller/controllerdefinitions/AcsCtrlDefinitions.h
+0x6aa1;ACSCTRL_WriteFileFailed;Writing the TLE to the file has failed.;161;ACS_CTRL;mission/controller/controllerdefinitions/AcsCtrlDefinitions.h
+0x6aa2;ACSCTRL_ReadFileFailed;Reading the TLE to the file has failed.;162;ACS_CTRL;mission/controller/controllerdefinitions/AcsCtrlDefinitions.h
+0x6aa3;ACSCTRL_SingleRwUnavailable;A single RW has failed.;163;ACS_CTRL;mission/controller/controllerdefinitions/AcsCtrlDefinitions.h
+0x6aa4;ACSCTRL_MultipleRwUnavailable;Multiple RWs have failed.;164;ACS_CTRL;mission/controller/controllerdefinitions/AcsCtrlDefinitions.h
 0x6b02;ACSMEKF_MekfUninitialized;No description;2;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6b03;ACSMEKF_MekfNoGyrData;No description;3;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6b04;ACSMEKF_MekfNoModelVectors;No description;4;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
@@ -617,5 +624,6 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x6f00;TMS_IsBusy;No description;0;TM_SINK;mission/tmtc/DirectTmSinkIF.h
 0x6f01;TMS_PartiallyWritten;No description;1;TM_SINK;mission/tmtc/DirectTmSinkIF.h
 0x6f02;TMS_NoWriteActive;No description;2;TM_SINK;mission/tmtc/DirectTmSinkIF.h
+0x6f03;TMS_Timeout;No description;3;TM_SINK;mission/tmtc/DirectTmSinkIF.h
 0x7000;VCS_ChannelDoesNotExist;No description;0;VIRTUAL_CHANNEL;mission/com/VirtualChannel.h
 0x7200;SCBU_KeyNotFound;No description;0;SCRATCH_BUFFER;bsp_q7s/memory/scratchApi.h

eive_tmtc/pus_tm/action_reply_handler.py

@@ -10,6 +10,7 @@ from eive_tmtc.config.object_ids import (
     CORE_CONTROLLER_ID,
     STAR_TRACKER_ID,
     P60_DOCK_HANDLER,
+    ACS_CONTROLLER,
 )
 from eive_tmtc.tmtc.acs.imtq import ImtqActionId
 from eive_tmtc.pus_tm.defs import PrintWrapper
@@ -17,6 +18,7 @@ from eive_tmtc.tmtc.core import handle_core_ctrl_action_replies
 from eive_tmtc.tmtc.payload.ploc_mpsoc import handle_mpsoc_data_reply
 from eive_tmtc.tmtc.payload.ploc_supervisor import SupvActionId
 from eive_tmtc.tmtc.acs.star_tracker import handle_star_tracker_action_replies
+from eive_tmtc.tmtc.acs.acs_ctrl import handle_acs_ctrl_action_replies
 from eive_tmtc.tmtc.power.tm import handle_get_param_data_reply
 from tmtccmd.pus.s8_fsfw_action import Service8FsfwTm
 from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
@@ -53,6 +55,8 @@ def handle_action_reply(
         return handle_core_ctrl_action_replies(action_id, pw, custom_data)
     elif object_id.as_bytes == STAR_TRACKER_ID:
         return handle_star_tracker_action_replies(action_id, pw, custom_data)
+    elif object_id.as_bytes == ACS_CONTROLLER:
+        return handle_acs_ctrl_action_replies(action_id, pw, custom_data)
     elif object_id.as_bytes in [
         ACU_HANDLER_ID,
         PDU_1_HANDLER_ID,

eive_tmtc/pus_tm/event_handler.py

@@ -1,26 +1,24 @@
-import logging
 import datetime
+import logging
 import sys
 
+from spacepackets.ccsds.time import CdsShortTimestamp
+from tmtccmd.fsfw import EventInfo
+from tmtccmd.pus.s5_fsfw_event import EventDefinition, Service5Tm
+from tmtccmd.pus.s200_fsfw_mode import Mode
+from tmtccmd.pus.s201_fsfw_health import FsfwHealth
+
 from eive_tmtc.config.events import get_event_dict
 from eive_tmtc.config.object_ids import get_object_ids
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from eive_tmtc.pus_tm.verification_handler import generic_retval_printout
 from eive_tmtc.tmtc.acs.subsystem import AcsMode
-from eive_tmtc.tmtc.core import SdState, SdCardSelect
-from tmtccmd.pus.s200_fsfw_mode import Mode
-from tmtccmd.pus.s201_fsfw_health import FsfwHealth
-
-from tmtccmd.pus.s5_fsfw_event import Service5Tm
-from tmtccmd.fsfw import EventInfo
-from spacepackets.ccsds.time import CdsShortTimestamp
+from eive_tmtc.tmtc.core import SdCardSelect, SdState
 
 _LOGGER = logging.getLogger(__name__)
 
 
-def handle_event_packet(  # noqa C901: Complexity okay here
-    raw_tm: bytes, pw: PrintWrapper
-):  # noqa C901: Complexity okay here
+def handle_event_packet(raw_tm: bytes, pw: PrintWrapper):
     tm = Service5Tm.unpack(data=raw_tm, time_reader=CdsShortTimestamp.empty())
     event_dict = get_event_dict()
     event_def = tm.event_definition
@@ -36,16 +34,30 @@ def handle_event_packet(  # noqa C901: Complexity okay here
         obj_name = event_def.reporter_id.hex(sep=",")
     else:
         obj_name = obj_id_obj.name
+    assert tm.time_provider is not None
     generic_event_string = (
         f"Object {obj_name} generated Event {info.name} (ID: {event_def.event_id:#04x})"
         f" at {tm.time_provider.as_date_time()}"
     )
     _LOGGER.info(generic_event_string)
-    pw.file_logger.info(
-        f"{datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S')}:"
-        f" {generic_event_string}"
-    )
-    specific_handler = False
+    if pw.file_logger is not None:
+        pw.file_logger.info(
+            f"{datetime.datetime.now().strftime('%Y-%m-%d %H:%M:%S')}:"
+            f" {generic_event_string}"
+        )
+    specific_handler = handle_specific_events(pw, obj_name, info, event_def)
+    if not specific_handler:
+        additional_event_info = (
+            f"Additional info: {info.info} | P1: {event_def.param1} | "
+            f"P2: {event_def.param2}"
+        )
+        pw.dlog(additional_event_info)
+
+
+def handle_specific_events(
+    pw: PrintWrapper, obj_name: str, info: EventInfo, event_def: EventDefinition
+) -> bool:
+    specific_handler = True
     if info.name == "MODE_TRANSITION_FAILED":
         reason = generic_retval_printout(event_def.param1)
         for string in reason:
@@ -151,12 +163,4 @@ def handle_event_packet(  # noqa C901: Complexity okay here
         mode = event_def.param1
         submode = event_def.param2
         pw.dlog(f"Mode Number {mode}, Submode: {submode}")
-    if not specific_handler:
-        additional_event_info = (
-            f"Additional info: {info.info} | P1: {event_def.param1} | "
-            f"P2: {event_def.param2}"
-        )
-        pw.dlog(additional_event_info)
-    if not specific_handler:
-        # printer.handle_long_tm_print(packet_if=tm.pus_tm, info_if=tm.pus_tm)
-        pass
+    return specific_handler

eive_tmtc/pus_tm/hk_handler.py

@@ -13,6 +13,7 @@ from eive_tmtc.tmtc.payload.rad_sensor import handle_rad_sensor_data
 from eive_tmtc.tmtc.acs.sus import handle_sus_hk
 from eive_tmtc.tmtc.payload.ploc_supervisor import handle_supv_hk_data
 from eive_tmtc.tmtc.acs.reaction_wheels import handle_rw_hk_data
+from eive_tmtc.tmtc.power.pwr_ctrl import handle_pwr_ctrl_hk_data
 from eive_tmtc.tmtc.com.syrlinks_handler import handle_syrlinks_hk_data
 from eive_tmtc.tmtc.tcs import handle_thermal_controller_hk_data
 from eive_tmtc.tmtc.tcs.tmp1075 import handle_tmp_1075_hk_data
@@ -201,6 +202,10 @@ def handle_regular_hk_print(  # noqa C901: Complexity okay here
         return handle_acs_ctrl_hk_data(
             pw=pw, set_id=set_id, hk_data=hk_data, packet_time=packet_dt
         )
+    elif objb == obj_ids.PWR_CONTROLLER:
+        return handle_pwr_ctrl_hk_data(
+            pw=pw, set_id=set_id, hk_data=hk_data, packet_time=packet_dt
+        )
     else:
         _LOGGER.info(
             f"Service 3 TM: Parsing for object {object_id} and set ID {set_id} "

eive_tmtc/tmtc/acs/acs_ctrl.py

@@ -29,9 +29,9 @@ from tmtccmd.pus.s20_fsfw_param_defs import (
 from tmtccmd.pus.s200_fsfw_mode import Mode, pack_mode_command
 from tmtccmd.pus.tc.s3_fsfw_hk import (
     create_request_one_diag_command,
+    create_request_one_hk_command,
     disable_periodic_hk_command,
     enable_periodic_hk_command_with_interval,
-    generate_one_hk_command,
     make_sid,
 )
 from tmtccmd.tmtc import service_provider
@@ -54,10 +54,17 @@ class SetId(enum.IntEnum):
     GYR_RAW_SET = 4
     GYR_PROC_SET = 5
     GPS_PROC_SET = 6
-    MEKF_DATA = 7
+    ATTITUDE_ESTIMATION_DATA = 7
     CTRL_VAL_DATA = 8
     ACTUATOR_CMD_DATA = 9
     FUSED_ROT_RATE_DATA = 10
+    FUSED_ROT_RATE_SOURCE_DATA = 11
+
+
+class DataSetRequest(enum.IntEnum):
+    ONESHOT = 0
+    ENABLE = 1
+    DISABLE = 2
 
 
 class ActionId(enum.IntEnum):
@@ -65,6 +72,7 @@ class ActionId(enum.IntEnum):
     RESET_MEKF = 1
     RESTORE_MEKF_NONFINITE_RECOVERY = 2
     UPDATE_TLE = 3
+    READ_TLE = 4
 
 
 CTRL_STRAT_DICT = {
@@ -85,67 +93,46 @@ CTRL_STRAT_DICT = {
     19: "SAFE_ECLIPSE_IDELING",
     20: "DETUMBLE_FULL",
     21: "DETUMBLE_DETERIORATED",
-    30: "PTG_MEKF",
-    31: "PTG_RAW",
+    100: "PTG_MEKF",
+    101: "PTG_STR",
+    102: "PTG_QUEST",
 }
 
-GPS_COURCE_DICT = {
+GPS_SOURCE_DICT = {
     0: "NONE",
     1: "GPS",
     2: "GPS_EXTRAPOLATED",
     3: "SGP4",
 }
 
+FUSED_ROT_RATE_SOURCE_DICT = {
+    0: "NONE",
+    1: "SUSMGM",
+    2: "QUEST",
+    3: "STR",
+}
+
 
 class OpCodes:
-    OFF = ["off"]
-    SAFE = ["safe"]
-    DTBL = ["safe_detumble"]
-    IDLE = ["ptg_idle"]
-    NADIR = ["ptg_nadir"]
-    TARGET = ["ptg_target"]
-    GS = ["ptg_target_gs"]
-    INERTIAL = ["ptg_inertial"]
-    SAFE_PTG = ["confirm_deployment"]
-    RESET_MEKF = ["reset_mekf"]
-    RESTORE_MEKF_NONFINITE_RECOVERY = ["restore_mekf_nonfinite_recovery"]
-    UPDATE_TLE = ["update_tle"]
-    SET_PARAMETER_SCALAR = ["set_scalar_param"]
-    SET_PARAMETER_VECTOR = ["set_vector_param"]
-    SET_PARAMETER_MATRIX = ["set_matrix_param"]
-    REQUEST_RAW_MGM_HK = ["mgm_raw_hk"]
-    ENABLE_RAW_MGM_HK = ["mgm_raw_enable_hk"]
-    DISABLE_RAW_MGM_HK = ["mgm_raw_disable_hk"]
-    REQUEST_PROC_MGM_HK = ["mgm_proc_hk"]
-    ENABLE_PROC_MGM_HK = ["mgm_proc_enable_hk"]
-    DISABLE_PROC_MGM_HK = ["mgm_proc_disable_hk"]
-    REQUEST_RAW_SUS_HK = ["sus_raw_hk"]
-    ENABLE_RAW_SUS_HK = ["sus_raw_enable_hk"]
-    DISABLE_RAW_SUS_HK = ["sus_raw_disable_hk"]
-    REQUEST_PROC_SUS_HK = ["sus_proc_hk"]
-    ENABLE_PROC_SUS_HK = ["sus_proc_enable_hk"]
-    DISABLE_PROC_SUS_HK = ["sus_proc_disable_hk"]
-    REQUEST_RAW_GYR_HK = ["gyr_raw_hk"]
-    ENABLE_RAW_GYR_HK = ["gyr_raw_enable_hk"]
-    DISABLE_RAW_GYR_HK = ["gyr_raw_disable_hk"]
-    REQUEST_PROC_GYR_HK = ["gyr_proc_hk"]
-    ENABLE_PROC_GYR_HK = ["gyr_proc_enable_hk"]
-    DISABLE_PROC_GYR_HK = ["gyr_proc_disable_hk"]
-    REQUEST_PROC_GPS_HK = ["gps_proc_hk"]
-    ENABLE_PROC_GPS_HK = ["gps_proc_enable_hk"]
-    DISABLE_PROC_GPS_HK = ["gps_proc_disable_hk"]
-    REQUEST_MEKF_HK = ["mekf_hk"]
-    ENABLE_MEKF_HK = ["mekf_enable_hk"]
-    DISABLE_MEKF_HK = ["mekf_disable_hk"]
-    REQUEST_CTRL_VAL_HK = ["ctrl_val_hk"]
-    ENABLE_CTRL_VAL_HK = ["ctrl_val_enable_hk"]
-    DISABLE_CTRL_VAL_HK = ["ctrl_val_disable_hk"]
-    REQUEST_ACT_CMD_HK = ["act_cmd_hk"]
-    ENABLE_ACT_CMD_HK = ["act_cmd_enable_hk"]
-    DISABLE_ACT_CMD_HK = ["act_cmd_disable_hk"]
-    REQUEST_FUSED_ROT_RATE_HK = ["f_rot_rate_hk"]
-    ENABLE_FUSED_ROT_RATE_HK = ["f_rot_rate_enable_hk"]
-    DISABLE_FUSED_ROT_RATE_HK = ["f_rot_rate_disable_hk"]
+    OFF = "off"
+    SAFE = "safe"
+    DTBL = "safe_detumble"
+    IDLE = "ptg_idle"
+    NADIR = "ptg_nadir"
+    TARGET = "ptg_target"
+    GS = "ptg_target_gs"
+    INERTIAL = "ptg_inertial"
+    SAFE_PTG = "confirm_deployment"
+    RESET_MEKF = "reset_mekf"
+    RESTORE_MEKF_NONFINITE_RECOVERY = "restore_mekf_nonfinite_recovery"
+    UPDATE_TLE = "update_tle"
+    READ_TLE = "read_tle"
+    SET_PARAMETER_SCALAR = "set_scalar_param"
+    SET_PARAMETER_VECTOR = "set_vector_param"
+    SET_PARAMETER_MATRIX = "set_matrix_param"
+    ONE_SHOOT_HK = "one_shot_hk"
+    ENABLE_HK = "enable_hk"
+    DISABLE_HK = "disable_hk"
 
 
 class Info:
@@ -161,42 +148,13 @@ class Info:
     RESET_MEKF = "Reset the MEKF"
     RESTORE_MEKF_NONFINITE_RECOVERY = "Restore MEKF non-finite recovery"
     UPDATE_TLE = "Update TLE"
+    READ_TLE = "Read the currently stored TLE"
     SET_PARAMETER_SCALAR = "Set Scalar Parameter"
     SET_PARAMETER_VECTOR = "Set Vector Parameter"
     SET_PARAMETER_MATRIX = "Set Matrix Parameter"
-    REQUEST_RAW_MGM_HK = "Request Raw MGM HK once"
-    ENABLE_RAW_MGM_HK = "Enable Raw MGM HK data generation"
-    DISABLE_RAW_MGM_HK = "Disable Raw MGM HK data generation"
-    REQUEST_PROC_MGM_HK = "Request Processed MGM HK"
-    ENABLE_PROC_MGM_HK = "Enable Processed MGM HK data generation"
-    DISABLE_PROC_MGM_HK = "Disable Processed MGM HK data generation"
-    REQUEST_RAW_SUS_HK = "Request Raw SUS HK"
-    ENABLE_RAW_SUS_HK = "Enable Raw SUS HK data generation"
-    DISABLE_RAW_SUS_HK = "Disable Raw SUS HK data generation"
-    REQUEST_PROC_SUS_HK = "Request Processed SUS HK"
-    ENABLE_PROC_SUS_HK = "Enable Processed SUS HK data generation"
-    DISABLE_PROC_SUS_HK = "Disable Processed MGM HK data generation"
-    REQUEST_RAW_GYR_HK = "Request Raw GYR HK"
-    ENABLE_RAW_GYR_HK = "Enable Raw GYR HK data generation"
-    DISABLE_RAW_GYR_HK = "Disable Raw GYR HK data generation"
-    REQUEST_PROC_GYR_HK = "Request Processed GYR HK"
-    ENABLE_PROC_GYR_HK = "Enable Processed GYR HK data generation"
-    DISABLE_PROC_GYR_HK = "Disable Processed GYR HK data generation"
-    REQUEST_PROC_GPS_HK = "Request Processed GPS HK"
-    ENABLE_PROC_GPS_HK = "Enable Processed GPS HK data generation"
-    DISABLE_PROC_GPS_HK = "Disable Processed GPS HK data generation"
-    REQUEST_MEKF_HK = "Request MEKF HK"
-    ENABLE_MEKF_HK = "Enable MEKF HK data generation"
-    DISABLE_MEKF_HK = "Disable MEKF HK data generation"
-    REQUEST_CTRL_VAL_HK = "Request Control Values HK"
-    ENABLE_CTRL_VAL_HK = "Enable Control Values HK data generation"
-    DISABLE_CTRL_VAL_HK = "Disable Control Values HK data generation"
-    REQUEST_ACT_CMD_HK = "Request Actuator Commands HK"
-    ENABLE_ACT_CMD_HK = "Enable Actuator Commands HK data generation"
-    DISABLE_ACT_CMD_HK = "Disable Actuator Commands HK data generation"
-    REQUEST_FUSED_ROT_RATE_HK = "Request Fused Rotational Rates HK"
-    ENABLE_FUSED_ROT_RATE_HK = "Enable Fused Rotational Rates HK data generation"
-    DISABLE_FUSED_ROT_RATE_HK = "Disable Fused Rotational Rates HK data generation"
+    ONE_SHOOT_HK = "One shoot HK Set"
+    ENABLE_HK = "Enable Periodic HK"
+    DISABLE_HK = "Disable Periodic HK"
 
 
 PERFORM_MGM_CALIBRATION = False
@@ -229,42 +187,13 @@ def acs_cmd_defs(defs: TmtcDefinitionWrapper):
         info=Info.RESTORE_MEKF_NONFINITE_RECOVERY,
     )
     oce.add(keys=OpCodes.UPDATE_TLE, info=Info.UPDATE_TLE)
+    oce.add(keys=OpCodes.READ_TLE, info=Info.READ_TLE)
     oce.add(keys=OpCodes.SET_PARAMETER_SCALAR, info=Info.SET_PARAMETER_SCALAR)
     oce.add(keys=OpCodes.SET_PARAMETER_VECTOR, info=Info.SET_PARAMETER_VECTOR)
     oce.add(keys=OpCodes.SET_PARAMETER_MATRIX, info=Info.SET_PARAMETER_MATRIX)
-    oce.add(keys=OpCodes.REQUEST_RAW_MGM_HK, info=Info.REQUEST_RAW_MGM_HK)
-    oce.add(keys=OpCodes.ENABLE_RAW_MGM_HK, info=Info.ENABLE_RAW_MGM_HK)
-    oce.add(keys=OpCodes.DISABLE_RAW_MGM_HK, info=Info.DISABLE_RAW_MGM_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_MGM_HK, info=Info.REQUEST_PROC_MGM_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_MGM_HK, info=Info.ENABLE_PROC_MGM_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_MGM_HK, info=Info.DISABLE_PROC_MGM_HK)
-    oce.add(keys=OpCodes.REQUEST_RAW_SUS_HK, info=Info.REQUEST_RAW_SUS_HK)
-    oce.add(keys=OpCodes.ENABLE_RAW_SUS_HK, info=Info.ENABLE_RAW_SUS_HK)
-    oce.add(keys=OpCodes.DISABLE_RAW_SUS_HK, info=Info.DISABLE_RAW_SUS_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_SUS_HK, info=Info.REQUEST_PROC_SUS_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_SUS_HK, info=Info.ENABLE_PROC_SUS_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_SUS_HK, info=Info.DISABLE_PROC_SUS_HK)
-    oce.add(keys=OpCodes.REQUEST_RAW_GYR_HK, info=Info.REQUEST_RAW_GYR_HK)
-    oce.add(keys=OpCodes.ENABLE_RAW_GYR_HK, info=Info.ENABLE_RAW_GYR_HK)
-    oce.add(keys=OpCodes.DISABLE_RAW_GYR_HK, info=Info.DISABLE_RAW_GYR_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_GYR_HK, info=Info.REQUEST_PROC_GYR_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_GYR_HK, info=Info.ENABLE_PROC_GYR_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_GYR_HK, info=Info.DISABLE_PROC_GYR_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_GPS_HK, info=Info.REQUEST_PROC_GPS_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_GPS_HK, info=Info.ENABLE_PROC_GPS_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_GPS_HK, info=Info.DISABLE_PROC_GPS_HK)
-    oce.add(keys=OpCodes.REQUEST_MEKF_HK, info=Info.REQUEST_MEKF_HK)
-    oce.add(keys=OpCodes.ENABLE_MEKF_HK, info=Info.ENABLE_MEKF_HK)
-    oce.add(keys=OpCodes.DISABLE_MEKF_HK, info=Info.DISABLE_MEKF_HK)
-    oce.add(keys=OpCodes.REQUEST_CTRL_VAL_HK, info=Info.REQUEST_CTRL_VAL_HK)
-    oce.add(keys=OpCodes.ENABLE_CTRL_VAL_HK, info=Info.ENABLE_CTRL_VAL_HK)
-    oce.add(keys=OpCodes.DISABLE_CTRL_VAL_HK, info=Info.DISABLE_CTRL_VAL_HK)
-    oce.add(keys=OpCodes.REQUEST_ACT_CMD_HK, info=Info.REQUEST_ACT_CMD_HK)
-    oce.add(keys=OpCodes.ENABLE_ACT_CMD_HK, info=Info.ENABLE_ACT_CMD_HK)
-    oce.add(keys=OpCodes.DISABLE_ACT_CMD_HK, info=Info.DISABLE_ACT_CMD_HK)
-    oce.add(keys=OpCodes.REQUEST_FUSED_ROT_RATE_HK, info=Info.REQUEST_FUSED_ROT_RATE_HK)
-    oce.add(keys=OpCodes.ENABLE_FUSED_ROT_RATE_HK, info=Info.ENABLE_FUSED_ROT_RATE_HK)
-    oce.add(keys=OpCodes.DISABLE_FUSED_ROT_RATE_HK, info=Info.DISABLE_FUSED_ROT_RATE_HK)
+    oce.add(keys=OpCodes.ONE_SHOOT_HK, info=Info.ONE_SHOOT_HK)
+    oce.add(keys=OpCodes.ENABLE_HK, info=Info.ENABLE_HK)
+    oce.add(keys=OpCodes.DISABLE_HK, info=Info.DISABLE_HK)
     defs.add_service(
         name=CustomServiceList.ACS_CTRL.value, info="ACS Controller", op_code_entry=oce
     )
@@ -274,50 +203,50 @@ def acs_cmd_defs(defs: TmtcDefinitionWrapper):
 def pack_acs_ctrl_command(p: ServiceProviderParams):  # noqa C901
     op_code = p.op_code
     q = p.queue_helper
-    if op_code in OpCodes.OFF:
+    if op_code == OpCodes.OFF:
         q.add_log_cmd(f"{Info.OFF}")
         q.add_pus_tc(pack_mode_command(ACS_CONTROLLER, Mode.OFF, 0))
-    elif op_code in OpCodes.SAFE:
+    elif op_code == OpCodes.SAFE:
         q.add_log_cmd(f"{Info.SAFE}")
         q.add_pus_tc(
             pack_mode_command(ACS_CONTROLLER, AcsMode.SAFE, SafeSubmode.DEFAULT)
         )
-    elif op_code in OpCodes.DTBL:
+    elif op_code == OpCodes.DTBL:
         q.add_log_cmd(f"{Info.DTBL}")
         q.add_pus_tc(
             pack_mode_command(ACS_CONTROLLER, AcsMode.SAFE, SafeSubmode.DETUMBLE)
         )
-    elif op_code in OpCodes.IDLE:
+    elif op_code == OpCodes.IDLE:
         q.add_log_cmd(f"{Info.IDLE}")
         q.add_pus_tc(pack_mode_command(ACS_CONTROLLER, AcsMode.IDLE, 0))
-    elif op_code in OpCodes.NADIR:
+    elif op_code == OpCodes.NADIR:
         q.add_log_cmd(f"{Info.NADIR}")
         q.add_pus_tc(pack_mode_command(ACS_CONTROLLER, AcsMode.PTG_NADIR, 0))
-    elif op_code in OpCodes.TARGET:
+    elif op_code == OpCodes.TARGET:
         q.add_log_cmd(f"{Info.TARGET}")
         q.add_pus_tc(pack_mode_command(ACS_CONTROLLER, AcsMode.PTG_TARGET, 0))
-    elif op_code in OpCodes.GS:
+    elif op_code == OpCodes.GS:
         q.add_log_cmd(f"{Info.GS}")
         q.add_pus_tc(pack_mode_command(ACS_CONTROLLER, AcsMode.PTG_TARGET_GS, 0))
-    elif op_code in OpCodes.INERTIAL:
+    elif op_code == OpCodes.INERTIAL:
         q.add_log_cmd(f"{Info.INERTIAL}")
         q.add_pus_tc(pack_mode_command(ACS_CONTROLLER, AcsMode.PTG_INERTIAL, 0))
-    elif op_code in OpCodes.SAFE_PTG:
+    elif op_code == OpCodes.SAFE_PTG:
         q.add_log_cmd(f"{Info.SAFE_PTG}")
         q.add_pus_tc(
             create_action_cmd(
                 ACS_CONTROLLER, ActionId.SOLAR_ARRAY_DEPLOYMENT_SUCCESSFUL
             )
         )
-    elif op_code in OpCodes.RESET_MEKF:
+    elif op_code == OpCodes.RESET_MEKF:
         q.add_log_cmd(f"{Info.RESET_MEKF}")
         q.add_pus_tc(create_action_cmd(ACS_CONTROLLER, ActionId.RESET_MEKF))
-    elif op_code in OpCodes.RESTORE_MEKF_NONFINITE_RECOVERY:
+    elif op_code == OpCodes.RESTORE_MEKF_NONFINITE_RECOVERY:
         q.add_log_cmd(f"{Info.RESTORE_MEKF_NONFINITE_RECOVERY}")
         q.add_pus_tc(
             create_action_cmd(ACS_CONTROLLER, ActionId.RESTORE_MEKF_NONFINITE_RECOVERY)
         )
-    elif op_code in OpCodes.UPDATE_TLE:
+    elif op_code == OpCodes.UPDATE_TLE:
         q.add_log_cmd(f"{Info.UPDATE_TLE}")
         while True:
             line1 = input("Please input the first line of the TLE: ")
@@ -333,239 +262,79 @@ def pack_acs_ctrl_command(p: ServiceProviderParams):  # noqa C901
                 print("The line does not have the required length of 69 characters")
         tle = line1.encode() + line2.encode()
         q.add_pus_tc(create_action_cmd(ACS_CONTROLLER, ActionId.UPDATE_TLE, tle))
-    elif op_code in OpCodes.SET_PARAMETER_SCALAR:
+    elif op_code == OpCodes.READ_TLE:
+        q.add_log_cmd(f"{Info.READ_TLE}")
+        q.add_pus_tc(create_action_cmd(ACS_CONTROLLER, ActionId.READ_TLE))
+    elif op_code == OpCodes.SET_PARAMETER_SCALAR:
         q.add_log_cmd(f"{Info.SET_PARAMETER_SCALAR}")
         set_acs_ctrl_param_scalar(q)
-    elif op_code in OpCodes.SET_PARAMETER_VECTOR:
+    elif op_code == OpCodes.SET_PARAMETER_VECTOR:
         q.add_log_cmd(f"{Info.SET_PARAMETER_VECTOR}")
         set_acs_ctrl_param_vector(q)
-    elif op_code in OpCodes.SET_PARAMETER_MATRIX:
+    elif op_code == OpCodes.SET_PARAMETER_MATRIX:
         q.add_log_cmd(f"{Info.SET_PARAMETER_MATRIX}")
         set_acs_ctrl_param_matrix(q)
-    elif op_code in OpCodes.REQUEST_RAW_MGM_HK:
-        q.add_log_cmd(Info.REQUEST_RAW_MGM_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.MGM_RAW_SET))
-        )
-    elif op_code in OpCodes.ENABLE_RAW_MGM_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_RAW_MGM_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.MGM_RAW_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_RAW_MGM_HK:
-        q.add_log_cmd(Info.DISABLE_RAW_MGM_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.MGM_RAW_SET)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_PROC_MGM_HK:
-        q.add_log_cmd(Info.REQUEST_PROC_MGM_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.MGM_PROC_SET))
-        )
-    elif op_code in OpCodes.ENABLE_PROC_MGM_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_MGM_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.MGM_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_PROC_MGM_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_MGM_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.MGM_PROC_SET)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_RAW_SUS_HK:
-        q.add_log_cmd(Info.REQUEST_RAW_SUS_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.SUS_RAW_SET))
-        )
-    elif op_code in OpCodes.ENABLE_RAW_SUS_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_RAW_SUS_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.SUS_RAW_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_RAW_SUS_HK:
-        q.add_log_cmd(Info.DISABLE_RAW_SUS_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.SUS_RAW_SET)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_PROC_SUS_HK:
-        q.add_log_cmd(Info.REQUEST_PROC_SUS_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.SUS_PROC_SET))
-        )
-    elif op_code in OpCodes.ENABLE_PROC_SUS_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_SUS_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.SUS_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_PROC_SUS_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_SUS_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.SUS_PROC_SET)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_RAW_GYR_HK:
-        q.add_log_cmd(Info.REQUEST_RAW_GYR_HK)
-        q.add_pus_tc(
-            create_request_one_diag_command(make_sid(ACS_CONTROLLER, SetId.GYR_RAW_SET))
-        )
-    elif op_code in OpCodes.ENABLE_RAW_GYR_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_RAW_GYR_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            True, make_sid(ACS_CONTROLLER, SetId.GYR_RAW_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_RAW_GYR_HK:
-        q.add_log_cmd(Info.DISABLE_RAW_GYR_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                True, make_sid(ACS_CONTROLLER, SetId.GYR_RAW_SET)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_PROC_GYR_HK:
-        q.add_log_cmd(Info.REQUEST_PROC_GYR_HK)
-        q.add_pus_tc(
-            create_request_one_diag_command(
-                make_sid(ACS_CONTROLLER, SetId.GYR_PROC_SET)
-            )
-        )
-    elif op_code in OpCodes.ENABLE_PROC_GYR_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_GYR_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            True, make_sid(ACS_CONTROLLER, SetId.GYR_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_PROC_GYR_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_GYR_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                True, make_sid(ACS_CONTROLLER, SetId.GYR_PROC_SET)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_PROC_GPS_HK:
-        q.add_log_cmd(Info.REQUEST_PROC_GPS_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.GPS_PROC_SET))
-        )
-    elif op_code in OpCodes.ENABLE_PROC_GPS_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_GPS_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.GPS_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_PROC_GPS_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_GPS_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.GPS_PROC_SET)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_MEKF_HK:
-        q.add_log_cmd(Info.REQUEST_MEKF_HK)
-        q.add_pus_tc(
-            create_request_one_diag_command(make_sid(ACS_CONTROLLER, SetId.MEKF_DATA))
-        )
-    elif op_code in OpCodes.ENABLE_MEKF_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_MEKF_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            True, make_sid(ACS_CONTROLLER, SetId.MEKF_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_MEKF_HK:
-        q.add_log_cmd(Info.DISABLE_MEKF_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(True, make_sid(ACS_CONTROLLER, SetId.MEKF_DATA))
-        )
-    elif op_code in OpCodes.REQUEST_CTRL_VAL_HK:
-        q.add_log_cmd(Info.REQUEST_CTRL_VAL_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.CTRL_VAL_DATA))
-        )
-    elif op_code in OpCodes.ENABLE_CTRL_VAL_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_CTRL_VAL_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.CTRL_VAL_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_CTRL_VAL_HK:
-        q.add_log_cmd(Info.DISABLE_CTRL_VAL_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.CTRL_VAL_DATA)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_ACT_CMD_HK:
-        q.add_log_cmd(Info.REQUEST_ACT_CMD_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.ACTUATOR_CMD_DATA))
-        )
-    elif op_code in OpCodes.ENABLE_ACT_CMD_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_ACT_CMD_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.ACTUATOR_CMD_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_ACT_CMD_HK:
-        q.add_log_cmd(Info.DISABLE_ACT_CMD_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.ACTUATOR_CMD_DATA)
-            )
-        )
-    elif op_code in OpCodes.REQUEST_FUSED_ROT_RATE_HK:
-        q.add_log_cmd(Info.REQUEST_FUSED_ROT_RATE_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.FUSED_ROT_RATE_DATA))
-        )
-    elif op_code in OpCodes.ENABLE_FUSED_ROT_RATE_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_FUSED_ROT_RATE_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.FUSED_ROT_RATE_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif op_code in OpCodes.DISABLE_FUSED_ROT_RATE_HK:
-        q.add_log_cmd(Info.DISABLE_FUSED_ROT_RATE_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.FUSED_ROT_RATE_DATA)
-            )
-        )
+    elif op_code == OpCodes.ONE_SHOOT_HK:
+        q.add_log_cmd(Info.ONE_SHOOT_HK)
+        request_dataset(q, DataSetRequest.ONESHOT)
+    elif op_code == OpCodes.ENABLE_HK:
+        q.add_log_cmd(Info.ENABLE_HK)
+        request_dataset(q, DataSetRequest.ENABLE)
+    elif op_code == OpCodes.DISABLE_HK:
+        q.add_log_cmd(Info.DISABLE_HK)
+        request_dataset(q, DataSetRequest.DISABLE)
     else:
         logging.getLogger(__name__).info(f"Unknown op code {op_code}")
 
 
+def request_dataset(q: DefaultPusQueueHelper, req_type: DataSetRequest):
+    for val in SetId:
+        print("{:<2}: {:<20}".format(val, val.name))
+    set_id = int(input("Specify the dataset \n" ""))
+    if set_id in [
+        SetId.GYR_RAW_SET,
+        SetId.GPS_PROC_SET,
+        SetId.ATTITUDE_ESTIMATION_DATA,
+    ]:
+        is_diag = True
+    else:
+        is_diag = False
+    match req_type:
+        case DataSetRequest.ONESHOT:
+            if is_diag:
+                q.add_pus_tc(
+                    create_request_one_diag_command(make_sid(ACS_CONTROLLER, set_id))
+                )
+            else:
+                q.add_pus_tc(
+                    create_request_one_hk_command(make_sid(ACS_CONTROLLER, set_id))
+                )
+        case DataSetRequest.ENABLE:
+            interval = float(
+                input("Please specify interval in floating point seconds: ")
+            )
+
+            if is_diag:
+                cmd_tuple = enable_periodic_hk_command_with_interval(
+                    True, make_sid(ACS_CONTROLLER, set_id), interval
+                )
+            else:
+                cmd_tuple = enable_periodic_hk_command_with_interval(
+                    False, make_sid(ACS_CONTROLLER, set_id), interval
+                )
+            q.add_pus_tc(cmd_tuple[0])
+            q.add_pus_tc(cmd_tuple[1])
+        case DataSetRequest.DISABLE:
+            if is_diag:
+                q.add_pus_tc(
+                    disable_periodic_hk_command(True, make_sid(ACS_CONTROLLER, set_id))
+                )
+            else:
+                q.add_pus_tc(
+                    disable_periodic_hk_command(False, make_sid(ACS_CONTROLLER, set_id))
+                )
+
+
 def set_acs_ctrl_param_scalar(q: DefaultPusQueueHelper):
     pt = int(
         input(
@@ -771,14 +540,16 @@ def handle_acs_ctrl_hk_data(
             handle_gyr_data_processed(pw, hk_data)
         case SetId.GPS_PROC_SET:
             handle_gps_data_processed(pw, hk_data)
-        case SetId.MEKF_DATA:
-            handle_mekf_data(pw, hk_data)
+        case SetId.ATTITUDE_ESTIMATION_DATA:
+            handle_attitude_estimation_data(pw, hk_data)
         case SetId.CTRL_VAL_DATA:
             handle_ctrl_val_data(pw, hk_data)
         case SetId.ACTUATOR_CMD_DATA:
             handle_act_cmd_data(pw, hk_data)
         case SetId.FUSED_ROT_RATE_DATA:
             handle_fused_rot_rate_data(pw, hk_data)
+        case SetId.FUSED_ROT_RATE_SOURCE_DATA:
+            handle_fused_rot_rate_source_data(pw, hk_data)
 
 
 def handle_acs_ctrl_sus_raw_data(pw: PrintWrapper, hk_data: bytes):
@@ -800,7 +571,7 @@ def handle_acs_ctrl_sus_raw_data(pw: PrintWrapper, hk_data: bytes):
         sus_list_formatted = vec_fmt.format(*sus_list)
         current_idx += length
         pw.dlog(f"SUS {idx} RAW: {sus_list_formatted}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=12)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=12))
 
 
 def handle_acs_ctrl_sus_processed_data(pw: PrintWrapper, hk_data: bytes):
@@ -836,7 +607,7 @@ def handle_acs_ctrl_sus_processed_data(pw: PrintWrapper, hk_data: bytes):
     sun_ijk_model = vec_fmt.format(*sun_ijk_model)
     current_idx += inc_len
     pw.dlog(f"{'SUS ijk Model'.ljust(25)}: {sun_ijk_model}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=15)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=15))
 
 
 def handle_raw_mgm_data(pw: PrintWrapper, hk_data: bytes):
@@ -892,7 +663,7 @@ def handle_raw_mgm_data(pw: PrintWrapper, hk_data: bytes):
         pw.dlog(f"{entry[0].ljust(28)}: {entry[1]}")
     current_idx += 1
     assert current_idx == 61
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6))
 
 
 def handle_mgm_data_processed(pw: PrintWrapper, hk_data: bytes):
@@ -946,7 +717,7 @@ def handle_mgm_data_processed(pw: PrintWrapper, hk_data: bytes):
     current_idx += inc_len
     if PERFORM_MGM_CALIBRATION:
         perform_mgm_calibration(pw, mgm_3)
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=8)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=8))
 
 
 def handle_gyr_data_raw(pw: PrintWrapper, hk_data: bytes):
@@ -980,7 +751,7 @@ def handle_gyr_data_raw(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"{'GYR 1 L3'.ljust(15)}: {float_str_fmt.format(*gyr_1_l3)}")
     pw.dlog(f"{'GYR 2 ADIS'.ljust(15)}: {float_str_fmt.format(*gyr_2_adis)}")
     pw.dlog(f"{'GYR 3 L3'.ljust(15)}: {float_str_fmt.format(*gyr_3_l3)}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], 4)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], 4))
 
 
 GYR_NAMES = ["GYR 0 ADIS", "GYR 1 L3", "GYR 2 ADIS", "GYR 3 L3"]
@@ -1006,7 +777,7 @@ def handle_gyr_data_processed(pw: PrintWrapper, hk_data: bytes):
     ]
     pw.dlog(f"GYR Vec Total: {gyr_vec_tot}")
     current_idx += inc_len
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5))
 
 
 def handle_gps_data_processed(pw: PrintWrapper, hk_data: bytes):
@@ -1060,8 +831,8 @@ def handle_gps_data_processed(pw: PrintWrapper, hk_data: bytes):
         fmt_source, hk_data[current_idx : current_idx + inc_len_source]
     )[0]
     current_idx += inc_len_source
-    if GPS_COURCE_DICT.get(source) is not None:
-        pw.dlog(f"GPS Source: {GPS_COURCE_DICT[source]}")
+    if GPS_SOURCE_DICT.get(source) is not None:
+        pw.dlog(f"GPS Source: {GPS_SOURCE_DICT[source]}")
     else:
         pw.dlog(f"'GPS Source (key unknown)': {source}")
     pw.dlog(f"GPS Latitude: {lat} [deg]")
@@ -1069,10 +840,10 @@ def handle_gps_data_processed(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"GPS Altitude: {alt} [m]")
     pw.dlog(f"GPS Position: {pos} [m]")
     pw.dlog(f"GPS Velocity: {velo} [m/s]")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6))
 
 
-def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
+def handle_attitude_estimation_data(pw: PrintWrapper, hk_data: bytes):
     mekf_status = {
         0: "UNINITIALIZED",
         1: "NO_GYR_DATA",
@@ -1083,7 +854,7 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
         10: "INITIALIZED",
         11: "RUNNING",
     }
-    pw.dlog("Received MEKF Set")
+    pw.dlog("Received Attitude Estimation Set")
     fmt_quat = "!dddd"
     fmt_str_4 = "[{:8.3f}, {:8.3f}, {:8.3f}, {:8.3f}]"
     fmt_str_3 = "[{:8.3f}, {:8.3f}, {:8.3f}]"
@@ -1092,11 +863,16 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
     inc_len_quat = struct.calcsize(fmt_quat)
     inc_len_vec = struct.calcsize(fmt_vec)
     inc_len_sts = struct.calcsize(fmt_sts)
-    if len(hk_data) < inc_len_quat + inc_len_vec + inc_len_sts:
-        pw.dlog("Received HK set too small")
+    old_size = inc_len_quat + inc_len_vec + inc_len_sts + 1
+    new_size = 2 * inc_len_quat + inc_len_vec + inc_len_sts + 1
+    size = len(hk_data)
+    if size not in [old_size, new_size]:
+        pw.dlog(f"Received Attitude Estimation HK Set of unexpected size: {size}")
         return
     current_idx = 0
-    quat = struct.unpack(fmt_quat, hk_data[current_idx : current_idx + inc_len_quat])
+    mekf_quat = struct.unpack(
+        fmt_quat, hk_data[current_idx : current_idx + inc_len_quat]
+    )
     current_idx += inc_len_quat
     rates = [
         rate * 180 / math.pi
@@ -1111,9 +887,17 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
         pw.dlog(f"{'MEKF Status'.ljust(25)}: {mekf_status[status]}")
     else:
         pw.dlog(f"{'MEKF Raw Status (key unknown)'.ljust(25)}: {status}")
-    pw.dlog(f"{'MEKF Quaternion'.ljust(25)}: {fmt_str_4.format(*quat)}")
+    pw.dlog(f"{'MEKF Quaternion'.ljust(25)}: {fmt_str_4.format(*mekf_quat)}")
     pw.dlog(f"{'MEKF Rotational Rate'.ljust(25)}: {fmt_str_3.format(*rates)}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3)
+    if size == new_size:
+        quest_quat = struct.unpack(
+            fmt_quat, hk_data[current_idx : current_idx + inc_len_quat]
+        )
+        current_idx += inc_len_quat
+        pw.dlog(f"{'QUEST Quaternion'.ljust(25)}: {fmt_str_4.format(*quest_quat)}")
+        pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=4))
+        return
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3))
 
 
 def handle_ctrl_val_data(pw: PrintWrapper, hk_data: bytes):
@@ -1163,14 +947,14 @@ def handle_ctrl_val_data(pw: PrintWrapper, hk_data: bytes):
     ]
     current_idx += inc_len_vec
     if CTRL_STRAT_DICT.get(strat) is not None:
-        pw.dlog(f"{'Safe Ctrl Strategy'.ljust(25)}: {CTRL_STRAT_DICT[strat]}")
+        pw.dlog(f"{'Ctrl Strategy'.ljust(25)}: {CTRL_STRAT_DICT[strat]}")
     else:
-        pw.dlog(f"{'Safe Ctrl Strategy (key unknown)'.ljust(25)}: {strat}")
+        pw.dlog(f"{'Ctrl Strategy (key unknown)'.ljust(25)}: {strat}")
     pw.dlog(f"Control Values Target Quaternion: {tgt_quat}")
     pw.dlog(f"Control Values Error Quaternion: {err_quat}")
     pw.dlog(f"Control Values Error Angle: {err_ang} [deg]")
     pw.dlog(f"Control Values Target Rotational Rate: {tgt_rot} [deg/s]")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5))
 
 
 def handle_act_cmd_data(pw: PrintWrapper, hk_data: bytes):
@@ -1209,15 +993,20 @@ def handle_act_cmd_data(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"Actuator Commands RW Target Torque: {rw_tgt_torque}")
     pw.dlog(f"Actuator Commands RW Target Speed: {rw_tgt_speed}")
     pw.dlog(f"Actuator Commands MTQ Target Dipole: {mtq_tgt_dipole}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3))
 
 
 def handle_fused_rot_rate_data(pw: PrintWrapper, hk_data: bytes):
     pw.dlog("Received Fused Rotation Rates Data Set")
     fmt_vec3_double = "!ddd"
     inc_len_vec3_double = struct.calcsize(fmt_vec3_double)
-    if len(hk_data) < 3 * inc_len_vec3_double:
-        pw.dlog("Received HK set too small")
+    fmt_source = "!B"
+    inc_len_source = struct.calcsize(fmt_source)
+    old_size = 3 * inc_len_vec3_double + 1
+    new_size = 3 * inc_len_vec3_double + inc_len_source + 1
+    size = len(hk_data)
+    if size not in [old_size, new_size]:
+        pw.dlog(f"Received Fused Rot Rate HK set of unexpected size: {len(hk_data)}")
         return
     current_idx = 0
     rot_rate_orthogonal = [
@@ -1244,7 +1033,91 @@ def handle_fused_rot_rate_data(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"Fused Rotational Rate Orthogonal: {rot_rate_orthogonal} [deg/s]")
     pw.dlog(f"Fused Rotational Rate Parallel: {rot_rate_parallel} [deg/s]")
     pw.dlog(f"Fused Rotational Rate Total: {rot_rate_total} [deg/s]")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3)
+    if size == new_size:
+        rot_rate_source = struct.unpack(
+            fmt_source, hk_data[current_idx : current_idx + inc_len_source]
+        )[0]
+        current_idx += inc_len_source
+        if FUSED_ROT_RATE_SOURCE_DICT.get(rot_rate_source) is not None:
+            pw.dlog(
+                f"Fused Rotational Rate Source: {FUSED_ROT_RATE_SOURCE_DICT[rot_rate_source]}"
+            )
+        else:
+            pw.dlog(f"Ctrl Strategy (key unknown): {rot_rate_source}")
+        pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=4))
+        return
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3))
+
+
+def handle_fused_rot_rate_source_data(pw: PrintWrapper, hk_data: bytes):
+    pw.dlog("Received Fused Rotation Rates Sources Data Set")
+    fmt_vec3_double = "!ddd"
+    inc_len_vec3_double = struct.calcsize(fmt_vec3_double)
+    if len(hk_data) < 5 * inc_len_vec3_double:
+        pw.dlog("Received HK set too small")
+        return
+    current_idx = 0
+    rot_rate_orthogonal_susmgm = [
+        f"{val*180/math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_parallel_susmgm = [
+        f"{val*180/math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_total_susmgm = [
+        f"{val*180/math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_total_quest = [
+        f"{val * 180 / math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_total_str = [
+        f"{val * 180 / math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    pw.dlog(
+        f"Fused Rotational Rate Orthogonal SUSMGM: {rot_rate_orthogonal_susmgm} [deg/s]"
+    )
+    pw.dlog(
+        f"Fused Rotational Rate Parallel SUSMGM: {rot_rate_parallel_susmgm} [deg/s]"
+    )
+    pw.dlog(f"Fused Rotational Rate Total SUSMGM: {rot_rate_total_susmgm} [deg/s]")
+    pw.dlog(f"Fused Rotational Rate Total QUEST: {rot_rate_total_quest} [deg/s]")
+    pw.dlog(f"Fused Rotational Rate Total STR: {rot_rate_total_str} [deg/s]")
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5))
+
+
+def handle_acs_ctrl_action_replies(
+    action_id: int, pw: PrintWrapper, custom_data: bytes
+):
+    if action_id == ActionId.READ_TLE:
+        handle_read_tle(pw, custom_data)
+
+
+def handle_read_tle(pw: PrintWrapper, custom_data: bytes):
+    pw.dlog("Received TLE")
+    data_length = 69 * 2
+    if len(custom_data) != data_length:
+        raise ValueError(f"Received data of unexpected length {len(custom_data)}")
+    tle = custom_data.decode()
+    pw.dlog(f"{tle[0:69]}\n{tle[69:69*2]}")
 
 
 def perform_mgm_calibration(  # noqa C901: Complexity okay

eive_tmtc/tmtc/acs/star_tracker.py

@@ -100,9 +100,10 @@ class StarTrackerActionId(enum.IntEnum):
     ADD_SECONDARY_TM_TO_NORMAL_MODE = 95
     RESET_SECONDARY_TM_SET = 96
     READ_SECONDARY_TM_SET = 97
+    RELOAD_JSON_CFG_FILE = 100
 
 
-class OpCodes:
+class OpCode:
     ON_BOOTLOADER = "on_bootloader"
     ON_FIRMWARE = "on_firmware"
     NORMAL = "nml"
@@ -120,6 +121,7 @@ class OpCodes:
     SET_IMG_PROCESSOR_MODE = "set_img_proc_mode"
     FW_UPDATE = "fw_update"
     SET_TIME_FROM_SYS_TIME = "set_time"
+    RELOAD_JSON_CFG_FILE = "reload_json_cfg"
 
 
 class Info:
@@ -135,6 +137,7 @@ class Info:
     SET_IMG_PROCESSOR_MODE = "Set Image Processor Mode"
     FW_UPDATE = "Firmware Update"
     SET_TIME_FROM_SYS_TIME = "Set time from system time"
+    RELOAD_JSON_CFG_FILE = "Reload JSON configuration file. Reboot still required."
 
 
 class SetId(enum.IntEnum):
@@ -244,36 +247,36 @@ def pack_star_tracker_commands(  # noqa C901
         f"Generate command for star tracker with object id: {object_id.as_hex_string}"
     )
     obyt = object_id.as_bytes
-    if op_code == OpCodes.ON_BOOTLOADER:
+    if op_code == OpCode.ON_BOOTLOADER:
         q.add_log_cmd("Star tracker: Mode On, Submode Bootloader")
         data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.ON, Submode.BOOTLOADER)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.ON_FIRMWARE:
+    if op_code == OpCode.ON_FIRMWARE:
         q.add_log_cmd("Star tracker: Mode On, Submode Firmware")
         data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.ON, Submode.FIRMWARE)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.NORMAL:
+    if op_code == OpCode.NORMAL:
         q.add_log_cmd("Star tracker: Mode Normal")
         data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.OFF:
+    if op_code == OpCode.OFF:
         q.add_log_cmd("Star tracker: Mode Off")
         data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.ONE_SHOOT_HK:
+    if op_code == OpCode.ONE_SHOOT_HK:
         q.add_log_cmd(Info.ONE_SHOOT_HK)
         request_dataset(q, DataSetRequest.ONESHOT)
-    if op_code == OpCodes.ENABLE_HK:
+    if op_code == OpCode.ENABLE_HK:
         q.add_log_cmd(Info.ENABLE_HK)
         request_dataset(q, DataSetRequest.ENABLE)
-    if op_code == OpCodes.DISABLE_HK:
+    if op_code == OpCode.DISABLE_HK:
         q.add_log_cmd(Info.DISABLE_HK)
         request_dataset(q, DataSetRequest.DISABLE)
     if op_code == "4":
         q.add_log_cmd("Star tracker: Mode Raw")
         data = pack_mode_data(obyt, Mode.RAW, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.PING:
+    if op_code == OpCode.PING:
         q.add_log_cmd("Star tracker: Ping")
         data = obyt + struct.pack("!I", StarTrackerActionId.PING)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -316,7 +319,7 @@ def pack_star_tracker_commands(  # noqa C901
         q.add_log_cmd("Star tracker: Request time")
         data = obyt + struct.pack("!I", StarTrackerActionId.REQ_TIME)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.UPLOAD_IMAGE:
+    if op_code == OpCode.UPLOAD_IMAGE:
         q.add_log_cmd("Star tracker: Upload image")
         image = get_upload_image()
         data = (
@@ -325,7 +328,7 @@ def pack_star_tracker_commands(  # noqa C901
             + bytearray(image, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.DOWNLOAD_IMAGE:
+    if op_code == OpCode.DOWNLOAD_IMAGE:
         q.add_log_cmd(f"STR: {Info.DOWNLOAD_IMAGE}")
         path = input("Specify storage location (default - /mnt/sd0/startracker): ")
         if not path:
@@ -417,7 +420,7 @@ def pack_star_tracker_commands(  # noqa C901
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.TAKE_IMAGE:
+    if op_code == OpCode.TAKE_IMAGE:
         q.add_log_cmd("Star tracker: Take image")
         actionid = int(
             input("Specify parameter ID (4: take image, 7: get histogram): ")
@@ -475,7 +478,7 @@ def pack_star_tracker_commands(  # noqa C901
         q.add_log_cmd("Star tracker: Get checksum")
         data = pack_checksum_command(obyt)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.SET_TIME_FROM_SYS_TIME:
+    if op_code == OpCode.SET_TIME_FROM_SYS_TIME:
         q.add_log_cmd(Info.SET_TIME_FROM_SYS_TIME)
         data = obyt + struct.pack("!I", StarTrackerActionId.SET_TIME_FROM_SYS_TIME)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -538,7 +541,7 @@ def pack_star_tracker_commands(  # noqa C901
         q.add_log_cmd("Star tracker: Request limits")
         data = obyt + struct.pack("!I", StarTrackerActionId.REQ_LIMITS)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.SET_IMG_PROCESSOR_MODE:
+    if op_code == OpCode.SET_IMG_PROCESSOR_MODE:
         q.add_log_cmd(Info.SET_IMG_PROCESSOR_MODE)
         json_file = get_config_file()
         data = (
@@ -639,7 +642,7 @@ def pack_star_tracker_commands(  # noqa C901
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.FW_UPDATE:
+    if op_code == OpCode.FW_UPDATE:
         q.add_log_cmd(Info.FW_UPDATE)
         firmware = get_firmware()
         data = (
@@ -648,7 +651,7 @@ def pack_star_tracker_commands(  # noqa C901
             + firmware.encode()
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.ADD_SECONDARY_TM_TO_NORMAL_MODE:
+    if op_code == OpCode.ADD_SECONDARY_TM_TO_NORMAL_MODE:
         q.add_log_cmd(Info.ADD_SECONDARY_TM_TO_NORMAL_MODE)
         for val in SetId:
             print("{:<2}: {:<20}".format(val, val.name))
@@ -660,7 +663,7 @@ def pack_star_tracker_commands(  # noqa C901
                 struct.pack("!I", set_id),
             )
         )
-    if op_code == OpCodes.RESET_SECONDARY_TM_SET:
+    if op_code == OpCode.RESET_SECONDARY_TM_SET:
         q.add_log_cmd(Info.RESET_SECONDARY_TM_SET)
         q.add_pus_tc(
             create_action_cmd(
@@ -668,13 +671,18 @@ def pack_star_tracker_commands(  # noqa C901
                 StarTrackerActionId.RESET_SECONDARY_TM_SET,
             )
         )
-    if op_code == OpCodes.READ_SECONDARY_TM_SET:
+    if op_code == OpCode.READ_SECONDARY_TM_SET:
         q.add_log_cmd(Info.READ_SECONDARY_TM_SET)
         q.add_pus_tc(
             create_action_cmd(
                 STAR_TRACKER_ID, StarTrackerActionId.READ_SECONDARY_TM_SET
             )
         )
+    if op_code == OpCode.RELOAD_JSON_CFG_FILE:
+        q.add_log_cmd(Info.RELOAD_JSON_CFG_FILE)
+        q.add_pus_tc(
+            create_action_cmd(STAR_TRACKER_ID, StarTrackerActionId.RELOAD_JSON_CFG_FILE)
+        )
 
 
 def request_dataset(q: DefaultPusQueueHelper, req_type: DataSetRequest):
@@ -1150,23 +1158,24 @@ def handle_read_secondary_tm_set(pw: PrintWrapper, custom_data: bytes):
 @tmtc_definitions_provider
 def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(OpCodes.ON_BOOTLOADER, "Mode On, Submode Bootloader")
-    oce.add(OpCodes.ON_FIRMWARE, "Mode On, Submode Firmware")
-    oce.add(OpCodes.NORMAL, "Mode Normal")
-    oce.add(OpCodes.OFF, "Mode Off")
-    oce.add(OpCodes.PING, "Star Tracker: Ping")
-    oce.add(OpCodes.TAKE_IMAGE, "Take Image")
-    oce.add(OpCodes.UPLOAD_IMAGE, Info.UPLOAD_IMAGE)
-    oce.add(OpCodes.DOWNLOAD_IMAGE, Info.DOWNLOAD_IMAGE)
-    oce.add(OpCodes.ONE_SHOOT_HK, Info.ONE_SHOOT_HK)
-    oce.add(OpCodes.ENABLE_HK, Info.ENABLE_HK)
-    oce.add(OpCodes.DISABLE_HK, Info.DISABLE_HK)
-    oce.add(OpCodes.SET_IMG_PROCESSOR_MODE, Info.SET_IMG_PROCESSOR_MODE)
+    oce.add(OpCode.ON_BOOTLOADER, "Mode On, Submode Bootloader")
+    oce.add(OpCode.ON_FIRMWARE, "Mode On, Submode Firmware")
+    oce.add(OpCode.NORMAL, "Mode Normal")
+    oce.add(OpCode.OFF, "Mode Off")
+    oce.add(OpCode.PING, "Star Tracker: Ping")
+    oce.add(OpCode.TAKE_IMAGE, "Take Image")
+    oce.add(OpCode.UPLOAD_IMAGE, Info.UPLOAD_IMAGE)
+    oce.add(OpCode.DOWNLOAD_IMAGE, Info.DOWNLOAD_IMAGE)
+    oce.add(OpCode.ONE_SHOOT_HK, Info.ONE_SHOOT_HK)
+    oce.add(OpCode.ENABLE_HK, Info.ENABLE_HK)
+    oce.add(OpCode.DISABLE_HK, Info.DISABLE_HK)
+    oce.add(OpCode.SET_IMG_PROCESSOR_MODE, Info.SET_IMG_PROCESSOR_MODE)
     oce.add(
-        OpCodes.ADD_SECONDARY_TM_TO_NORMAL_MODE, Info.ADD_SECONDARY_TM_TO_NORMAL_MODE
+        OpCode.ADD_SECONDARY_TM_TO_NORMAL_MODE, Info.ADD_SECONDARY_TM_TO_NORMAL_MODE
     )
-    oce.add(OpCodes.READ_SECONDARY_TM_SET, Info.READ_SECONDARY_TM_SET)
-    oce.add(OpCodes.RESET_SECONDARY_TM_SET, Info.RESET_SECONDARY_TM_SET)
-    oce.add(OpCodes.FW_UPDATE, Info.FW_UPDATE)
-    oce.add(OpCodes.SET_TIME_FROM_SYS_TIME, Info.SET_TIME_FROM_SYS_TIME)
+    oce.add(OpCode.READ_SECONDARY_TM_SET, Info.READ_SECONDARY_TM_SET)
+    oce.add(OpCode.RESET_SECONDARY_TM_SET, Info.RESET_SECONDARY_TM_SET)
+    oce.add(OpCode.FW_UPDATE, Info.FW_UPDATE)
+    oce.add(OpCode.SET_TIME_FROM_SYS_TIME, Info.SET_TIME_FROM_SYS_TIME)
+    oce.add(OpCode.RELOAD_JSON_CFG_FILE, Info.RELOAD_JSON_CFG_FILE)
     defs.add_service(CustomServiceList.STAR_TRACKER.value, "Star Tracker", oce)

eive_tmtc/tmtc/core.py

@@ -5,22 +5,25 @@ import struct
 from pathlib import Path
 from typing import Tuple
 
-from eive_tmtc.pus_tm.defs import PrintWrapper
-
-from eive_tmtc.config.definitions import CustomServiceList
 from spacepackets.ecss import PusTelecommand
 from tmtccmd.config import TmtcDefinitionWrapper
-
-from tmtccmd.tmtc import DefaultPusQueueHelper
-from tmtccmd.pus.s8_fsfw_action import create_action_cmd
-from tmtccmd.pus.tc.s3_fsfw_hk import make_sid, generate_one_hk_command
-from tmtccmd.pus.s20_fsfw_param import (
-    create_scalar_u8_parameter,
-    create_load_param_cmd,
-)
 from tmtccmd.config.tmtc import OpCodeEntry, tmtc_definitions_provider
-from eive_tmtc.config.object_ids import CORE_CONTROLLER_ID
 from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
+from tmtccmd.pus.s8_fsfw_action import create_action_cmd
+from tmtccmd.pus.s11_tc_sched import (
+    create_enable_tc_sched_cmd,
+    create_disable_tc_sched_cmd,
+)
+from tmtccmd.pus.s20_fsfw_param import (
+    create_load_param_cmd,
+    create_scalar_u8_parameter,
+)
+from tmtccmd.pus.tc.s3_fsfw_hk import generate_one_hk_command, make_sid
+from tmtccmd.tmtc import DefaultPusQueueHelper
+
+from eive_tmtc.config.definitions import CustomServiceList
+from eive_tmtc.config.object_ids import CORE_CONTROLLER_ID
+from eive_tmtc.pus_tm.defs import PrintWrapper
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -66,6 +69,7 @@ class ActionId(enum.IntEnum):
     MV_HELPER = 53
     RM_HELPER = 54
     MKDIR_HELPER = 55
+    ENABLE_SCHEDULER = 56
 
 
 class ParamId(enum.IntEnum):
@@ -115,6 +119,8 @@ class OpCode:
     RWD_SET_MAX_REBOOT_CNT = "rwd_max_cnt"
     AUTO_SWITCH_ENABLE = "auto_switch_enable"
     AUTO_SWITCH_DISABLE = "auto_switch_disable"
+    ENABLE_SCHEDULER = "enable_scheduler"
+    DISABLE_SCHEDULER = "disable_scheduler"
 
 
 class Info:
@@ -142,6 +148,8 @@ class Info:
     MKDIR_HELPER = "Filesystem Directory Creation Helper"
     AUTO_SWITCH_ENABLE = "Enable Auto-Switch Feature with a specific target image"
     AUTO_SWITCH_DISABLE = "Disable Auto-Switch Feature"
+    ENABLE_SCHEDULER = "Enable scheduler"
+    DISABLE_SCHEDULER = "Disable scheduler"
 
 
 class Chip(enum.IntEnum):
@@ -241,6 +249,8 @@ def add_core_controller_definitions(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.CP_HELPER, info=Info.CP_HELPER)
     oce.add(keys=OpCode.RM_HELPER, info=Info.RM_HELPER)
     oce.add(keys=OpCode.MKDIR_HELPER, info=Info.MKDIR_HELPER)
+    oce.add(keys=OpCode.ENABLE_SCHEDULER, info=Info.ENABLE_SCHEDULER)
+    oce.add(keys=OpCode.DISABLE_SCHEDULER, info=Info.DISABLE_SCHEDULER)
     defs.add_service(CustomServiceList.CORE.value, "Core Controller", oce)
 
 
@@ -514,6 +524,12 @@ def pack_core_commands(  # noqa C901
         q.add_pus_tc(
             create_action_cmd(CORE_CONTROLLER_ID, ActionId.MKDIR_HELPER, user_data)
         )
+    elif op_code == OpCode.ENABLE_SCHEDULER:
+        q.add_log_cmd(Info.ENABLE_SCHEDULER)
+        q.add_pus_tc(create_enable_tc_sched_cmd())
+    elif op_code == OpCode.DISABLE_SCHEDULER:
+        q.add_log_cmd(Info.DISABLE_SCHEDULER)
+        q.add_pus_tc(create_disable_tc_sched_cmd())
     else:
         _LOGGER.warning(
             f"Unknown operation code {op_code} for core controller commands"

eive_tmtc/tmtc/obj_prompt.py

@@ -4,6 +4,7 @@ from eive_tmtc.config.object_ids import (
     GPS_0_HEALTH_DEV,
     GYRO_0_ADIS_HANDLER_ID,
     GYRO_1_L3G_HANDLER_ID,
+    GYRO_2_ADIS_HANDLER_ID,
     ACS_BOARD_ASS_ID,
     RW_ASSEMBLY,
     SUS_BOARD_ASS_ID,
@@ -38,14 +39,15 @@ ACS_OBJ_DICT = {
     5: ("iMTQ MGT", IMTQ_HANDLER_ID),
     6: ("GYR 0 ADIS", GYRO_0_ADIS_HANDLER_ID),
     7: ("GYR 1 L3G", GYRO_1_L3G_HANDLER_ID),
-    8: ("MGM 0 LIS3", MGM_0_LIS3_HANDLER_ID),
-    9: ("MGM 1 RM3100", MGM_1_RM3100_HANDLER_ID),
-    10: ("GPS 0 Health Device", GPS_0_HEALTH_DEV),
-    11: ("SUS 0", SUS_0_N_LOC_XFYFZM_PT_XF),
-    12: ("SUS 6", SUS_6_R_LOC_XFYBZM_PT_XF),
-    13: ("RW 1", RW1_ID),
-    14: ("RW 2", RW2_ID),
-    15: ("STR", STAR_TRACKER_ID),
+    8: ("GYR 2 ADIS", GYRO_2_ADIS_HANDLER_ID),
+    9: ("MGM 0 LIS3", MGM_0_LIS3_HANDLER_ID),
+    10: ("MGM 1 RM3100", MGM_1_RM3100_HANDLER_ID),
+    11: ("GPS 0 Health Device", GPS_0_HEALTH_DEV),
+    12: ("SUS 0", SUS_0_N_LOC_XFYFZM_PT_XF),
+    13: ("SUS 6", SUS_6_R_LOC_XFYBZM_PT_XF),
+    14: ("RW 1", RW1_ID),
+    15: ("RW 2", RW2_ID),
+    16: ("STR", STAR_TRACKER_ID),
 }
 
 TCS_OBJ_DICT = {

eive_tmtc/tmtc/payload/ploc_mpsoc.py

@@ -24,6 +24,7 @@ from tmtccmd.tmtc import service_provider
 from tmtccmd.tmtc.decorator import ServiceProviderParams
 from eive_tmtc.utility.input_helper import InputHelper
 from tmtccmd.pus.s200_fsfw_mode import pack_mode_data, Mode
+from tmtccmd.pus.s20_fsfw_param import create_load_param_cmd, create_scalar_u8_parameter
 from tmtccmd.pus.s8_fsfw_action import create_action_cmd
 
 _LOGGER = logging.getLogger(__name__)
@@ -93,6 +94,10 @@ class ActionId(enum.IntEnum):
     TC_FLASH_READ_FULL_FILE = 30
 
 
+class ParamId(enum.IntEnum):
+    PLOC_SUPV_CMD_TO_ON = 1
+
+
 class OpCode:
     ON = "on"
     OFF = "off"
@@ -115,6 +120,8 @@ class OpCode:
     SIMPLEX_SEND_FILE = "simplex_send_file"
     DOWNLINK_DATA_MODULATE = "downlink_data_modulate"
     MODE_SNAPSHOT = "mode_snapshot"
+    ENABLE_PLOC_SUPV_COMMANDING_TO_ON = "enable_ploc_supv_cmd_to_on"
+    DISABLE_PLOC_SUPV_COMMANDING_TO_ON = "disable_ploc_supv_cmd_to_on"
 
 
 class Info:
@@ -137,6 +144,10 @@ class Info:
     FLASH_GET_DIR_CONTENT = "Get flash directory content on MPSoC"
     DOWNLINK_DATA_MODULATE = "Downlink data modulate"
     MODE_SNAPSHOT = "Mode Snapshot"
+    ENABLE_PLOC_SUPV_COMMANDING_TO_ON = "Enable PLOC SUPV commanding when switching ON"
+    DISABLE_PLOC_SUPV_COMMANDING_TO_ON = (
+        "Disable PLOC SUPV commanding when switching ON"
+    )
 
 
 class MemAddresses(enum.IntEnum):
@@ -171,6 +182,13 @@ def add_ploc_mpsoc_cmds(defs: TmtcDefinitionWrapper):
     oce.add(OpCode.SIMPLEX_SEND_FILE, Info.SIMPLEX_SEND_FILE)
     oce.add(OpCode.DOWNLINK_DATA_MODULATE, Info.DOWNLINK_DATA_MODULATE)
     oce.add(OpCode.MODE_SNAPSHOT, Info.MODE_SNAPSHOT)
+    oce.add(
+        OpCode.ENABLE_PLOC_SUPV_COMMANDING_TO_ON, Info.ENABLE_PLOC_SUPV_COMMANDING_TO_ON
+    )
+    oce.add(
+        OpCode.DISABLE_PLOC_SUPV_COMMANDING_TO_ON,
+        Info.DISABLE_PLOC_SUPV_COMMANDING_TO_ON,
+    )
     defs.add_service(CustomServiceList.PLOC_MPSOC.value, "Ploc MPSoC", oce)
 
 
@@ -179,6 +197,7 @@ def pack_ploc_mpsoc_commands(  # noqa C901
     p: ServiceProviderParams,
 ):  # noqa C901: Complexity okay here.
     object_id = get_object_ids().get(PLOC_MPSOC_ID)
+    assert object_id is not None
     q = p.queue_helper
     prefix = "PLOC MPSoC"
     op_code = p.op_code
@@ -313,6 +332,24 @@ def pack_ploc_mpsoc_commands(  # noqa C901
         q.add_log_cmd("PLOC MPSoC: Mode snapshot")
         data = object_id.as_bytes + struct.pack("!I", ActionId.TC_MODE_SNAPSHOT)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
+    if op_code == OpCode.ENABLE_PLOC_SUPV_COMMANDING_TO_ON:
+        q.add_log_cmd(Info.ENABLE_PLOC_SUPV_COMMANDING_TO_ON)
+        q.add_pus_tc(
+            create_load_param_cmd(
+                create_scalar_u8_parameter(
+                    object_id.as_bytes, 0, ParamId.PLOC_SUPV_CMD_TO_ON, 0
+                )
+            )
+        )
+    if op_code == OpCode.DISABLE_PLOC_SUPV_COMMANDING_TO_ON:
+        q.add_log_cmd(Info.DISABLE_PLOC_SUPV_COMMANDING_TO_ON)
+        q.add_pus_tc(
+            create_load_param_cmd(
+                create_scalar_u8_parameter(
+                    object_id.as_bytes, 0, ParamId.PLOC_SUPV_CMD_TO_ON, 1
+                )
+            )
+        )
 
 
 def generate_write_mem_command(

eive_tmtc/tmtc/payload/ploc_supervisor.py

@@ -10,23 +10,24 @@ import enum
 import logging
 import struct
 
-from eive_tmtc.config.object_ids import PLOC_SUPV_ID, get_object_ids
-from eive_tmtc.config.definitions import CustomServiceList
-from eive_tmtc.pus_tm.defs import PrintWrapper
 from spacepackets.ecss.tc import PusTelecommand
-from tmtccmd.pus.tc.s3_fsfw_hk import generate_one_hk_command, make_sid
 from tmtccmd.config import TmtcDefinitionWrapper
-from tmtccmd.config.tmtc import tmtc_definitions_provider, OpCodeEntry
+from tmtccmd.config.tmtc import OpCodeEntry, tmtc_definitions_provider
+from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
+from tmtccmd.pus.s8_fsfw_action import create_action_cmd
+from tmtccmd.pus.s200_fsfw_mode import Mode, pack_mode_data
+from tmtccmd.pus.tc.s3_fsfw_hk import generate_one_hk_command, make_sid
 from tmtccmd.tmtc import service_provider
 from tmtccmd.tmtc.decorator import ServiceProviderParams
-from tmtccmd.pus.s200_fsfw_mode import pack_mode_data, Mode
-from tmtccmd.pus.s8_fsfw_action import create_action_cmd
-from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
+
+from eive_tmtc.config.definitions import CustomServiceList
+from eive_tmtc.config.object_ids import PLOC_SUPV_ID, get_object_ids
+from eive_tmtc.pus_tm.defs import PrintWrapper
 from eive_tmtc.utility.input_helper import InputHelper
 
 _LOGGER = logging.getLogger(__name__)
 
-latchup_id_dict = {
+LATCHUP_ID_DICT = {
     "0": "0.85V",
     "1": "1.8V",
     "2": "MISC",
@@ -40,25 +41,13 @@ HARDCODED = "0"
 MANUAL_INPUT = "1"
 HARDCODED_FILE = "/home/rmueller/EIVE/mpsoc_boot.bin"
 
-update_file_dict = {
+UPDATE_FILE_DICT = {
     HARDCODED: ["hardcoded", ""],
     MANUAL_INPUT: ["manual input", ""],
-    "2": ["/mnt/sd0/ploc/supervisor/update.bin", "/mnt/sd0/ploc/supervisor/update.bin"],
-    "3": [
-        "/mnt/sd0/ploc/supervisor/update-large.bin",
-        "/mnt/sd0/ploc/supervisor/update-large.bin",
-    ],
-    "4": [
-        "/mnt/sd0/ploc/supervisor/update-small.bin",
-        "/mnt/sd0/ploc/supervisor/update-small.bin",
-    ],
-    "5": [
-        "/mnt/sd0/ploc/supervisor/mpsoc-uart-working.bin",
-        "/mnt/sd0/ploc/supervisor/mpsoc-uart-working.bin",
-    ],
+    "2": ["/mnt/sd0/ploc/mpsoc/image.bin", "/mnt/sd0/ploc/mpsoc/image.bin"],
 }
 
-event_buffer_path_dict = {
+EVENT_BUFFER_PATH_DICT = {
     MANUAL_INPUT: ["manual input", ""],
     "2": ["/mnt/sd0/ploc/supervisor", "/mnt/sd0/ploc/supervisor"],
 }
@@ -84,7 +73,7 @@ FACTORY_RESET_OPS = {
 
 
 class SupvActionId(enum.IntEnum):
-    HK_REPORT = 1
+    REQUEST_HK_REPORT = 1
     START_MPSOC = 3
     SHUTWOWN_MPSOC = 4
     SEL_MPSOC_BOOT_IMAGE = 5
@@ -111,7 +100,7 @@ class SupvActionId(enum.IntEnum):
     SET_GPIO = 34
     READ_GPIO = 35
     RESTART_SUPERVISOR = 36
-    LOGGING_REQUEST_COUNTERS = 38
+    REQUEST_LOGGING_COUNTERS = 38
     FACTORY_RESET = 39
     START_MPSOC_QUIET = 45
     SET_SHUTDOWN_TIMEOUT = 46
@@ -130,27 +119,32 @@ class SupvActionId(enum.IntEnum):
     MEM_CHECK = 61
 
 
-class SetIds(enum.IntEnum):
+class SetId(enum.IntEnum):
     HK_REPORT = 102
     BOOT_STATUS_REPORT = 103
+    LATCHUP_REPORT = 104
+    COUNTERS_REPORT = 105
+    ADC_REPORT = 106
+    UPDATE_STATUS_REPORT = 107
 
 
-class OpCodes:
-    OFF = ["0", "off"]
-    ON = ["1", "on"]
-    NORMAL = ["2", "nml"]
-    HK_TO_OBC = ["3", "hk_to_obc"]
-    REQUEST_HK = ["4", "req_hk"]
-    START_MPSOC = ["5", "start_mpsoc"]
-    SHUTDOWN_MPSOC = ["6", "stop_mpsoc"]
-    SEL_NVM = ["7", "sel_nvm"]
-    SET_TIME_REF = ["set_time_ref"]
-    FACTORY_FLASH = ["factory_flash"]
-    REQ_BOOT_STATUS_REPORT = ["13", "boot_report"]
-    START_UPDATE = ["42", "start_update"]
-    PERFORM_UPDATE = ["update"]
-    FACTORY_RESET = ["factory_reset"]
-    MEM_CHECK = ["mem_check"]
+class OpCode:
+    OFF = "off"
+    ON = "on"
+    NORMAL = "nml"
+    HK_TO_OBC = "hk_to_obc"
+    REQUEST_HK_SET_FROM_DEV = "req_hk_from_dev"
+    REQUEST_HK_SET = "req_hk"
+    START_MPSOC = "start_mpsoc"
+    SHUTDOWN_MPSOC = "stop_mpsoc"
+    SEL_NVM = "sel_nvm"
+    SET_TIME_REF = "set_time_ref"
+    FACTORY_FLASH = "factory_flash"
+    REQ_BOOT_STATUS_REPORT = "boot_report"
+    START_UPDATE = "start_update"
+    PERFORM_UPDATE = "update"
+    FACTORY_RESET = "factory_reset"
+    MEM_CHECK = "mem_check"
     RESET_MPSOC = "reset_mpsoc"
 
 
@@ -160,7 +154,8 @@ class Info(str, enum.Enum):
     ON = "Switch On"
     NML = "Switch Normal"
     HK_TO_OBC = "Request  HK from PLOC SUPV"
-    REQUEST_HK = "Request HK set from PLOC Handler"
+    REQUEST_HK_SET_FROM_DEV = "Request HK set from the device to the PLOC Handler"
+    REQUEST_HK_SET = "Request HK set from PLOC Handler"
     SET_TIME_REF = "Set time reference"
     FACTORY_FLASH = "Factory Flash Mode"
     PERFORM_UPDATE = "Start or continue MPSoC SW update at starting bytes"
@@ -175,21 +170,22 @@ class Info(str, enum.Enum):
 @tmtc_definitions_provider
 def add_ploc_supv_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(OpCodes.OFF, Info.OFF)
-    oce.add(OpCodes.ON, Info.ON)
-    oce.add(OpCodes.NORMAL, Info.NML)
-    oce.add(OpCodes.HK_TO_OBC, Info.HK_TO_OBC)
-    oce.add(OpCodes.REQUEST_HK, Info.REQUEST_HK)
-    oce.add(OpCodes.START_MPSOC, "PLOC Supervisor: Start MPSoC")
-    oce.add(OpCodes.SHUTDOWN_MPSOC, "PLOC Supervisor: Shutdown MPSoC")
-    oce.add(OpCodes.SEL_NVM, Info.SEL_NVM)
-    oce.add(OpCodes.SET_TIME_REF, Info.SET_TIME_REF)
-    oce.add(OpCodes.FACTORY_RESET, Info.FACTORY_RESET)
-    oce.add(OpCodes.RESET_MPSOC, Info.RESET_MPSOC)
+    oce.add(OpCode.OFF, Info.OFF)
+    oce.add(OpCode.ON, Info.ON)
+    oce.add(OpCode.NORMAL, Info.NML)
+    oce.add(OpCode.HK_TO_OBC, Info.HK_TO_OBC)
+    oce.add(OpCode.REQUEST_HK_SET, Info.REQUEST_HK_SET)
+    oce.add(OpCode.REQUEST_HK_SET_FROM_DEV, Info.REQUEST_HK_SET_FROM_DEV)
+    oce.add(OpCode.START_MPSOC, "PLOC Supervisor: Start MPSoC")
+    oce.add(OpCode.SHUTDOWN_MPSOC, "PLOC Supervisor: Shutdown MPSoC")
+    oce.add(OpCode.SEL_NVM, Info.SEL_NVM)
+    oce.add(OpCode.SET_TIME_REF, Info.SET_TIME_REF)
+    oce.add(OpCode.FACTORY_RESET, Info.FACTORY_RESET)
+    oce.add(OpCode.RESET_MPSOC, Info.RESET_MPSOC)
     oce.add("8", "PLOC Supervisor: Set max restart tries")
     oce.add("11", "PLOC Supervisor: Set boot timeout")
     oce.add("12", "PLOC Supervisor: Disable Hk")
-    oce.add(OpCodes.REQ_BOOT_STATUS_REPORT, Info.REQ_BOOT_STATUS_REPORT)
+    oce.add(OpCode.REQ_BOOT_STATUS_REPORT, Info.REQ_BOOT_STATUS_REPORT)
     oce.add("17", "PLOC Supervisor: Enable latchup alert")
     oce.add("18", "PLOC Supervisor: Disable latchup alert")
     oce.add("20", "PLOC Supervisor: Set alert limit")
@@ -203,12 +199,12 @@ def add_ploc_supv_cmds(defs: TmtcDefinitionWrapper):
     oce.add("35", "PLOC Supervisor: Set GPIO")
     oce.add("36", "PLOC Supervisor: Read GPIO")
     oce.add("37", "PLOC Supervisor: Restart supervisor")
-    oce.add(OpCodes.PERFORM_UPDATE, Info.PERFORM_UPDATE)
-    oce.add(OpCodes.START_UPDATE, Info.START_UPDATE)
+    oce.add(OpCode.PERFORM_UPDATE, Info.PERFORM_UPDATE)
+    oce.add(OpCode.START_UPDATE, Info.START_UPDATE)
     oce.add("43", "PLOC Supervisor: Terminate supervisor process")
     oce.add("44", "PLOC Supervisor: Start MPSoC quiet")
     oce.add("45", "PLOC Supervisor: Set shutdown timeout")
-    oce.add(OpCodes.FACTORY_FLASH, Info.FACTORY_FLASH)
+    oce.add(OpCode.FACTORY_FLASH, Info.FACTORY_FLASH)
     oce.add("47", "PLOC Supervisor: Enable auto TM")
     oce.add("48", "PLOC Supervisor: Disable auto TM")
     oce.add("51", "PLOC Supervisor: Logging request event buffers")
@@ -219,7 +215,7 @@ def add_ploc_supv_cmds(defs: TmtcDefinitionWrapper):
     oce.add("56", "PLOC Supervisor: Reset PL")
     oce.add("57", "PLOC Supervisor: Enable NVMs")
     oce.add("58", "PLOC Supervisor: Continue update")
-    oce.add(OpCodes.MEM_CHECK, Info.MEM_CHECK)
+    oce.add(OpCode.MEM_CHECK, Info.MEM_CHECK)
     defs.add_service(CustomServiceList.PLOC_SUPV.value, "PLOC Supervisor", oce)
 
 
@@ -228,39 +224,56 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
     q = p.queue_helper
     op_code = p.op_code
     object_id = get_object_ids().get(PLOC_SUPV_ID)
+    assert object_id is not None
     q.add_log_cmd(f"Testing PLOC Supervisor with object id: {object_id.as_hex_string}")
     obyt = object_id.as_bytes
     prefix = "PLOC Supervisor"
-    if op_code in OpCodes.OFF:
+    if op_code == OpCode.OFF:
         q.add_log_cmd(f"{prefix}: {Info.OFF}")
         command = pack_mode_data(object_id.as_bytes, Mode.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
-    if op_code in OpCodes.ON:
+    if op_code == OpCode.ON:
         q.add_log_cmd(f"{prefix}: {Info.ON}")
         command = pack_mode_data(object_id.as_bytes, Mode.ON, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
-    if op_code in OpCodes.NORMAL:
+    if op_code == OpCode.NORMAL:
         q.add_log_cmd(f"{prefix}: {Info.NML}")
         command = pack_mode_data(object_id.as_bytes, Mode.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
-    if op_code in OpCodes.HK_TO_OBC:
+    if op_code == OpCode.HK_TO_OBC:
         q.add_log_cmd(f"{prefix}: {Info.HK_TO_OBC}")
-        command = obyt + struct.pack("!I", SupvActionId.HK_REPORT)
+        command = obyt + struct.pack("!I", SupvActionId.REQUEST_HK_REPORT)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.REQUEST_HK:
-        q.add_log_cmd(f"{prefix}: {Info.REQUEST_HK}")
-        sid = make_sid(object_id.as_bytes, SetIds.HK_REPORT)
+    if op_code == OpCode.REQUEST_HK_SET:
+        q.add_log_cmd(f"{prefix}: {Info.REQUEST_HK_SET}")
+        sid = make_sid(object_id.as_bytes, prompt_set_id())
         cmd = generate_one_hk_command(sid)
         q.add_pus_tc(cmd)
-    elif op_code in OpCodes.START_MPSOC:
+    if op_code == OpCode.REQUEST_HK_SET_FROM_DEV:
+        q.add_log_cmd(f"{prefix}: {Info.REQUEST_HK_SET_FROM_DEV}")
+        set_id = prompt_set_id()
+        action_cmd = None
+        if set_id == SetId.HK_REPORT:
+            action_cmd = create_action_cmd(PLOC_SUPV_ID, SupvActionId.REQUEST_HK_REPORT)
+        if set_id == SetId.ADC_REPORT:
+            action_cmd = create_action_cmd(
+                PLOC_SUPV_ID, SupvActionId.REQUEST_ADC_REPORT
+            )
+        if set_id == SetId.COUNTERS_REPORT:
+            action_cmd = create_action_cmd(
+                PLOC_SUPV_ID, SupvActionId.REQUEST_LOGGING_COUNTERS
+            )
+        assert action_cmd is not None
+        q.add_pus_tc(action_cmd)
+    elif op_code == OpCode.START_MPSOC:
         q.add_log_cmd("PLOC Supervisor: Start MPSoC")
         command = obyt + struct.pack("!I", SupvActionId.START_MPSOC)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.SHUTDOWN_MPSOC:
+    if op_code == OpCode.SHUTDOWN_MPSOC:
         q.add_log_cmd("PLOC Supervisor: Shutdown MPSoC")
         command = object_id.as_bytes + struct.pack("!I", SupvActionId.SHUTWOWN_MPSOC)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.SEL_NVM:
+    if op_code == OpCode.SEL_NVM:
         q.add_log_cmd("PLOC Supervisor: Select MPSoC boot image")
         mem = int(input("MEM (NVM0 - 0 or NVM1 - 1): "))
         bp0 = int(input("BP0 (0 or 1): "))
@@ -268,7 +281,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
         bp2 = int(input("BP2 (0 or 1): "))
         command = pack_sel_boot_image_cmd(object_id.as_bytes, mem, bp0, bp1, bp2)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.FACTORY_RESET:
+    if op_code == OpCode.FACTORY_RESET:
         q.add_log_cmd(f"{prefix}: {Info.FACTORY_RESET}")
         while True:
             print("Please select the key for a factory reset operation")
@@ -294,11 +307,11 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
             + struct.pack("!B", restart_tries)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code == OpCodes.RESET_MPSOC:
+    if op_code == OpCode.RESET_MPSOC:
         q.add_log_cmd(Info.RESET_MPSOC)
         command = object_id.as_bytes + struct.pack("!I", SupvActionId.RESET_MPSOC)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.SET_TIME_REF:
+    if op_code == OpCode.SET_TIME_REF:
         q.add_log_cmd("PLOC Supervisor: Set time reference")
         command = object_id.as_bytes + struct.pack("!I", SupvActionId.SET_TIME_REF)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
@@ -315,14 +328,14 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
         q.add_log_cmd("PLOC Supervisor: Disable HK")
         command = object_id.as_bytes + struct.pack("!I", SupvActionId.DISABLE_HK)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.REQ_BOOT_STATUS_REPORT:
+    if op_code in OpCode.REQ_BOOT_STATUS_REPORT:
         q.add_log_cmd(f"{prefix}:  {Info.REQ_BOOT_STATUS_REPORT}")
         command = object_id.as_bytes + struct.pack(
             "!I", SupvActionId.GET_BOOT_STATUS_REPORT
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
         q.add_wait_seconds(2.0)
-        sid = make_sid(object_id.as_bytes, SetIds.BOOT_STATUS_REPORT)
+        sid = make_sid(object_id.as_bytes, SetId.BOOT_STATUS_REPORT)
         req_hk = generate_one_hk_command(sid)
         q.add_pus_tc(req_hk)
     if op_code == "17":
@@ -383,11 +396,11 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
             "!I", SupvActionId.RESTART_SUPERVISOR
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.START_UPDATE:
+    if op_code in OpCode.START_UPDATE:
         q.add_log_cmd("PLOC Supversior: Start new MPSoC SW update")
         command = pack_update_command(object_id.as_bytes, True)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.PERFORM_UPDATE:
+    if op_code in OpCode.PERFORM_UPDATE:
         q.add_log_cmd("PLOC Supervisor: Perform MPSoC SW update")
         command = pack_update_command(object_id.as_bytes, False)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
@@ -405,7 +418,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
         q.add_log_cmd("PLOC Supervisor: Set shutdown timeout")
         command = pack_set_shutdown_timeout_command(object_id.as_bytes)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.FACTORY_FLASH:
+    if op_code in OpCode.FACTORY_FLASH:
         q.add_log_cmd(f"{prefix}: {Info.FACTORY_FLASH}")
         command = object_id.as_bytes + struct.pack("!I", SupvActionId.FACTORY_FLASH)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
@@ -434,7 +447,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
     if op_code == "54":
         q.add_log_cmd("PLOC Supervisor: Logging request counters")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionId.LOGGING_REQUEST_COUNTERS
+            "!I", SupvActionId.REQUEST_LOGGING_COUNTERS
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "55":
@@ -462,7 +475,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
         q.add_log_cmd("PLOC Supervisor: Continue update")
         command = object_id.as_bytes + struct.pack("!I", SupvActionId.CONTINUE_UPDATE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.MEM_CHECK:
+    if op_code == OpCode.MEM_CHECK:
         custom_data = bytearray()
         update_file = get_update_file()
         memory_id = int(input("Specify memory ID: "))
@@ -481,6 +494,20 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):  # noqa C901
         q.add_pus_tc(command)
 
 
+def prompt_set_id() -> SetId:
+    for set_id in SetId:
+        print(f"{set_id}: {set_id.name}")
+    while True:
+        set_id = int(input("Please select the set ID to request: "))
+        try:
+            set_id_typed = SetId(set_id)
+        except ValueError:
+            _LOGGER.warning("invalid set ID, try again")
+            continue
+        break
+    return set_id_typed
+
+
 def pack_sel_boot_image_cmd(
     object_id: bytes, mem: int, bp0: int, bp1: int, bp2: int
 ) -> bytearray:
@@ -545,9 +572,9 @@ def get_latchup_id() -> int:
     description_string = "Description".ljust(description_column_width)
     print(f"{key_string} | {description_string}")
     print(separator_string)
-    for key in latchup_id_dict:
+    for key in LATCHUP_ID_DICT:
         key_string = key.ljust(key_column_width)
-        description_string = latchup_id_dict[key].ljust(description_column_width)
+        description_string = LATCHUP_ID_DICT[key].ljust(description_column_width)
         print(f"{key_string} | {description_string}")
     return int(input("Specify latchup ID: "))
 
@@ -676,10 +703,10 @@ def pack_set_gpio_cmd(object_id: bytes) -> bytearray:
     port = int(input("Specify port: 0x"), 16)
     pin = int(input("Specify pin: 0x"), 16)
     val = int(input("Specify val: 0x"), 16)
-    command = object_id + struct.pack("!I", SupvActionId.SET_GPIO)
-    command = command + struct.pack("!B", port)
-    command = command + struct.pack("!B", pin)
-    command = command + struct.pack("!B", val)
+    command = bytearray(object_id + struct.pack("!I", SupvActionId.SET_GPIO))
+    command.append(port)
+    command.append(pin)
+    command.append(val)
     return bytearray(command)
 
 
@@ -701,25 +728,25 @@ def pack_logging_set_topic(object_id: bytes) -> bytearray:
 
 def get_update_file() -> str:
     _LOGGER.info("Specify update file ")
-    input_helper = InputHelper(update_file_dict)
+    input_helper = InputHelper(UPDATE_FILE_DICT)
     key = input_helper.get_key()
     if key == HARDCODED:
         file = HARDCODED_FILE
     elif key == MANUAL_INPUT:
         file = input("Ploc Supervisor: Specify absolute name of update file: ")
     else:
-        file = update_file_dict[key][1]
+        file = UPDATE_FILE_DICT[key][1]
     return file
 
 
 def get_event_buffer_path() -> str:
     _LOGGER.info("Specify path where to store event buffer file ")
-    input_helper = InputHelper(event_buffer_path_dict)
+    input_helper = InputHelper(EVENT_BUFFER_PATH_DICT)
     key = input_helper.get_key()
     if key == MANUAL_INPUT:
         file = input("Ploc Supervisor: Specify path: ")
     else:
-        file = event_buffer_path_dict[key][1]
+        file = EVENT_BUFFER_PATH_DICT[key][1]
     return file
 
 
@@ -731,62 +758,152 @@ class SocState(enum.IntEnum):
 
 
 def handle_supv_hk_data(set_id: int, hk_data: bytes, pw: PrintWrapper):
-    current_idx = 0
-    if set_id == SetIds.HK_REPORT:
-        fmt_str = "!IIIQIIIIIBBBB"
-        inc_len = struct.calcsize(fmt_str)
-        (
-            temp_ps,
-            temp_pl,
-            temp_sup,
-            uptime,
-            cpu_load,
-            avail_heap,
-            num_tcs,
-            num_tms,
-            soc_state,
-            nvm_0_1_state,
-            nvm_3_state,
-            mission_io_state,
-            fmc_state,
-        ) = struct.unpack(fmt_str, hk_data[:inc_len])
-        pw.dlog(f"Temp PS {temp_ps} C | Temp PL {temp_pl} C | Temp SUP {temp_sup} C")
-        pw.dlog(f"Uptime {uptime} | CPU Load {cpu_load} | Avail Heap {avail_heap}")
-        pw.dlog(f"Number TCs {num_tcs} | Number TMs {num_tms}")
-        pw.dlog(f"SOC state {SocState(soc_state)}")
-        pw.dlog(f"NVM 01 State {nvm_0_1_state}")
-        pw.dlog(f"NVM 3 State {nvm_3_state}")
-        pw.dlog(f"Mission IO state {mission_io_state}")
-        pw.dlog(f"FMC state {fmc_state}")
-        pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[inc_len:], 13))
-    elif set_id == SetIds.BOOT_STATUS_REPORT:
-        fmt_str = "!BBIIBBBBBB"
-        inc_len = struct.calcsize(fmt_str)
-        (
-            soc_state,
-            power_cycles,
-            boot_after_ms,
-            boot_timeout_ms,
-            active_nvm,
-            bp_0_state,
-            bp_1_state,
-            bp_2_state,
-            boot_state,
-            boot_cycles,
-        ) = struct.unpack(fmt_str, hk_data[0 : 0 + inc_len])
-        current_idx += inc_len
-        pw.dlog(
-            "SoC state (0:off, 1:booting, 2:update, 3:operating, 4:shutdown, 5:reset):"
-            f" {soc_state}"
-        )
-        pw.dlog(f"Power Cycles {power_cycles}")
-        pw.dlog(f"Boot after {boot_after_ms} ms | Boot timeout {boot_timeout_ms} ms")
-        pw.dlog(f"Active NVM: {active_nvm}")
-        pw.dlog(
-            f"BP0 State {bp_0_state} | BP1 State {bp_1_state} | BP2 State {bp_2_state}"
-        )
-        pw.dlog(f"Boot State {boot_state} | Boot Cycles {boot_cycles}")
-        FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], 10)
+    if set_id == SetId.HK_REPORT:
+        handle_hk_report(hk_data, pw)
+    elif set_id == SetId.BOOT_STATUS_REPORT:
+        handle_boot_report(hk_data, pw)
+    elif set_id == SetId.ADC_REPORT:
+        handle_adc_report(hk_data)
+    elif set_id == SetId.COUNTERS_REPORT:
+        handle_counters_report(hk_data)
     else:
         pw.dlog(f"PLOC SUPV: HK handling not implemented for set ID {set_id}")
         pw.dlog(f"Raw Data: 0x[{hk_data.hex(sep=',')}]")
+
+
+def handle_hk_report(hk_data: bytes, pw: PrintWrapper):
+    fmt_str = "!IIIQIIIIIBBBB"
+    inc_len = struct.calcsize(fmt_str)
+    (
+        temp_ps,
+        temp_pl,
+        temp_sup,
+        uptime,
+        cpu_load,
+        avail_heap,
+        num_tcs,
+        num_tms,
+        soc_state,
+        nvm_0_1_state,
+        nvm_3_state,
+        mission_io_state,
+        fmc_state,
+    ) = struct.unpack(fmt_str, hk_data[:inc_len])
+    pw.dlog(f"Temp PS {temp_ps} C | Temp PL {temp_pl} C | Temp SUP {temp_sup} C")
+    pw.dlog(f"Uptime {uptime} | CPU Load {cpu_load} | Avail Heap {avail_heap}")
+    pw.dlog(f"Number TCs {num_tcs} | Number TMs {num_tms}")
+    pw.dlog(f"SOC state {SocState(soc_state)}")
+    pw.dlog(f"NVM 01 State {nvm_0_1_state}")
+    pw.dlog(f"NVM 3 State {nvm_3_state}")
+    pw.dlog(f"Mission IO state {mission_io_state}")
+    pw.dlog(f"FMC state {fmc_state}")
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[inc_len:], 13))
+
+
+def handle_boot_report(hk_data: bytes, pw: PrintWrapper):
+    current_idx = 0
+    fmt_str = "!BBIIBBBBBB"
+    inc_len = struct.calcsize(fmt_str)
+    (
+        soc_state,
+        power_cycles,
+        boot_after_ms,
+        boot_timeout_ms,
+        active_nvm,
+        bp_0_state,
+        bp_1_state,
+        bp_2_state,
+        boot_state,
+        boot_cycles,
+    ) = struct.unpack(fmt_str, hk_data[0 : 0 + inc_len])
+    current_idx += inc_len
+    pw.dlog(
+        "SoC state (0:off, 1:booting, 2:update, 3:operating, 4:shutdown, 5:reset):"
+        f" {soc_state}"
+    )
+    pw.dlog(f"Power Cycles {power_cycles}")
+    pw.dlog(f"Boot after {boot_after_ms} ms | Boot timeout {boot_timeout_ms} ms")
+    pw.dlog(f"Active NVM: {active_nvm}")
+    pw.dlog(f"BP0 State {bp_0_state} | BP1 State {bp_1_state} | BP2 State {bp_2_state}")
+    pw.dlog(f"Boot State {boot_state} | Boot Cycles {boot_cycles}")
+    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], 10)
+
+
+def handle_adc_report(hk_data: bytes):
+    if len(hk_data) < 64:
+        _LOGGER.warning("ADC report smaller than 64 bytes")
+    current_idx = 0
+    adc_raw = []
+    adc_eng = []
+    for _ in range(16):
+        adc_raw.append(struct.unpack("!H", hk_data[current_idx : current_idx + 2])[0])
+        current_idx += 2
+    for _ in range(16):
+        adc_eng.append(struct.unpack("!H", hk_data[current_idx : current_idx + 2])[0])
+        current_idx += 2
+
+    print(f"{'Index'.ljust(10)} | {'ADC RAW'.ljust(10)} | {'ADC ENG'.ljust(10)}")
+    for i in range(16):
+        print(f"{i: >10} | {adc_raw[i]: >10} | {adc_eng[i]: >10}")
+
+
+def handle_counters_report(hk_data: bytes):
+    current_idx = 0
+    signature = struct.unpack("!I", hk_data[current_idx : current_idx + 4])[0]
+    current_idx += 4
+    latchup_counters = []
+    for _ in range(7):
+        latchup_counters.append(
+            struct.unpack("!I", hk_data[current_idx : current_idx + 4])[0]
+        )
+        current_idx += 4
+    fmt_str = "!IIIIIIIIIIIIIIIIIIII"
+    inc_len = struct.calcsize(fmt_str)
+    (
+        adc_deviation_triggers_cnt,
+        tc_received_cnt,
+        tm_available_cnt,
+        supervisor_boots,
+        mpsoc_boots,
+        mpsoc_boot_failed_attempts,
+        mpsoc_powerup,
+        mpsoc_updates,
+        mpsoc_heartbeat_resets,
+        cpu_wdt_resets,
+        ps_heartbeats_lost,
+        pl_heartbeats_lost,
+        eb_task_lost,
+        bm_task_lost,
+        lm_task_lost,
+        am_task_lost,
+        tctmm_task_lost,
+        mm_task_lost,
+        hk_task_lost,
+        dl_task_lost,
+    ) = struct.unpack(fmt_str, hk_data[current_idx : current_idx + inc_len])
+    current_idx += inc_len
+    _redwire_tasks_lost = []
+    for _ in range(3):
+        _redwire_tasks_lost.append(
+            struct.unpack("!I", hk_data[current_idx : current_idx + 4])[0]
+        )
+    print(f"Signature: {signature}")
+    print(f"Latchup Counters: {latchup_counters}")
+    print(f"ADC Deviation Triggers Count: {adc_deviation_triggers_cnt}")
+    print(f"TCs received: {tc_received_cnt} | TMs Available: {tm_available_cnt}")
+    print(f"Supervisor Boots: {supervisor_boots} | MPSoC boots: {mpsoc_boots}")
+    print(f"MPSoC boot failed attempts: {mpsoc_boot_failed_attempts}")
+    print(f"MPSoC powerup: {mpsoc_powerup}")
+    print(f"MPSoC updates: {mpsoc_updates}")
+    print(f"MPSoC heartbeat resets: {mpsoc_heartbeat_resets}")
+    print(f"CPU WDT resets: {cpu_wdt_resets}")
+    print(f"PS heartbeats lost: {ps_heartbeats_lost}")
+    print(f"PL heartbeats lost: {pl_heartbeats_lost}")
+    print(f"EB task lost: {eb_task_lost}")
+    print(f"BM task lost: {bm_task_lost}")
+    print(f"LM task lost: {lm_task_lost}")
+    print(f"AM task lost: {am_task_lost}")
+    print(f"TCTMM task lost: {tctmm_task_lost}")
+    print(f"MM task lost: {mm_task_lost}")
+    print(f"HK task lost: {hk_task_lost}")
+    print(f"DL task lost: {dl_task_lost}")

eive_tmtc/tmtc/payload/plpcdu.py

@@ -43,21 +43,25 @@ class OpCode:
     NORMAL_TX = "nml_tx"
     NORMAL_MPA = "nml_mpa"
     NORMAL_HPA = "nml_hpa"
+    NORMAL_CUSTOM = "nml_custom"
 
     ENABLE_HK = "enable_hk"
     DISABLE_HK = "disable_hk"
     REQ_OS_HK = "hk_os"
 
+    DISABLE_ORDER_CHECKING = "disable_order_checking"
+    ENABLE_ORDER_CHECKING = "enable_order_checking"
+
     UPDATE_I_UPPER_LIMIT = "update_i_upper_limit"
     UPDATE_V_LOWER_LIMIT = "update_v_lower_limit"
     UPDATE_V_UPPER_LIMIT = "update_v_upper_limit"
 
-    INJECT_SSR_TO_DRO_FAILURE = ["10", "inject_ssr_dro_fault"]
-    INJECT_DRO_TO_X8_FAILURE = ["11", "inject_dro_x8_fault"]
-    INJECT_X8_TO_TX_FAILURE = ["12", "inject_x8_tx_fault"]
-    INJECT_TX_TO_MPA_FAILURE = ["13", "inject_tx_mpa_fault"]
-    INJECT_MPA_TO_HPA_FAILURE = ["14", "inject_mpa_hpa_fault"]
-    INJECT_ALL_ON_FAILURE = ["15", "inject_all_on_fault"]
+    INJECT_SSR_TO_DRO_FAILURE = "inject_ssr_dro_fault"
+    INJECT_DRO_TO_X8_FAILURE = "inject_dro_x8_fault"
+    INJECT_X8_TO_TX_FAILURE = "inject_x8_tx_fault"
+    INJECT_TX_TO_MPA_FAILURE = "inject_tx_mpa_fault"
+    INJECT_MPA_TO_HPA_FAILURE = "inject_mpa_hpa_fault"
+    INJECT_ALL_ON_FAILURE = "inject_all_on_fault"
 
 
 class Info:
@@ -70,6 +74,7 @@ class Info:
     NORMAL_TX = f"{NORMAL}, TX on"
     NORMAL_MPA = f"{NORMAL}, MPA on"
     NORMAL_HPA = f"{NORMAL}, HPA on"
+    NORMAL_CUSTOM = f"{NORMAL}, Custom Channel Settings"
     REQ_OS_HK = "Request One Shot HK"
     SWITCH_HPA_ON_PROC = "Switch HPA on procedure"
     ENABLE_HK = "Enable HK"
@@ -77,6 +82,8 @@ class Info:
     UPDATE_I_UPPER_LIMIT = "Update upper current parameter"
     UPDATE_V_LOWER_LIMIT = "Update lower voltage parameter"
     UPDATE_V_UPPER_LIMIT = "Update upper voltage parameter"
+    DISABLE_ORDER_CHECKING = "Disable order checks"
+    ENABLE_ORDER_CHECKING = "Enable order checks"
 
 
 class SetId(enum.IntEnum):
@@ -163,6 +170,8 @@ class ParamId(enum.IntEnum):
     INJECT_MPA_TO_HPA_FAILURE = 34
     INJECT_ALL_ON_FAILURE = 35
 
+    DISABLE_ORDER_CHECK_CHANNELS = 40
+
 
 class DevSelect(enum.IntEnum):
     SSR_NEG_V = 0
@@ -185,6 +194,7 @@ def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.NORMAL_TX, info=Info.NORMAL_TX)
     oce.add(keys=OpCode.NORMAL_MPA, info=Info.NORMAL_MPA)
     oce.add(keys=OpCode.NORMAL_HPA, info=Info.NORMAL_HPA)
+    oce.add(keys=OpCode.NORMAL_CUSTOM, info=Info.NORMAL_CUSTOM)
     oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK)
     oce.add(keys=OpCode.ENABLE_HK, info=Info.ENABLE_HK)
     oce.add(keys=OpCode.UPDATE_V_LOWER_LIMIT, info=Info.UPDATE_V_LOWER_LIMIT)
@@ -211,6 +221,8 @@ def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper):
         info="Inject failure in MPA to HPA transition",
     )
     oce.add(keys=OpCode.INJECT_ALL_ON_FAILURE, info="Inject failure in all on mode")
+    oce.add(keys=OpCode.DISABLE_ORDER_CHECKING, info=Info.DISABLE_ORDER_CHECKING)
+    oce.add(keys=OpCode.ENABLE_ORDER_CHECKING, info=Info.ENABLE_ORDER_CHECKING)
     defs.add_service(CustomServiceList.PL_PCDU.value, "PL PCDU", oce)
 
 
@@ -281,6 +293,14 @@ def pack_pl_pcdu_commands(  # noqa C901: Complexity is okay here.
             mode=Mode.NORMAL,
             submode=submode_mask_to_submode(NormalSubmodesMask.HPA_ON),
         )
+
+    if op_code == OpCode.NORMAL_CUSTOM:
+        pack_pl_pcdu_mode_cmd(
+            q=q,
+            info=Info.NORMAL_CUSTOM,
+            mode=Mode.NORMAL,
+            submode=prompt_custom_normal_submode(),
+        )
     if op_code == OpCode.REQ_OS_HK:
         q.add_log_cmd(f"PL PCDU: {Info.REQ_OS_HK}")
         q.add_pus_tc(
@@ -288,6 +308,26 @@ def pack_pl_pcdu_commands(  # noqa C901: Complexity is okay here.
                 sid=make_sid(object_id=PL_PCDU_ID, set_id=SetId.ADC)
             )
         )
+    if op_code == OpCode.DISABLE_ORDER_CHECKING:
+        q.add_log_cmd(Info.DISABLE_ORDER_CHECKING)
+        q.add_pus_tc(
+            create_load_param_cmd(
+                create_scalar_boolean_parameter(
+                    PL_PCDU_ID, 0, ParamId.DISABLE_ORDER_CHECK_CHANNELS, True
+                )
+            )
+        )
+
+    if op_code == OpCode.ENABLE_ORDER_CHECKING:
+        q.add_log_cmd(Info.ENABLE_ORDER_CHECKING)
+        q.add_pus_tc(
+            create_load_param_cmd(
+                create_scalar_boolean_parameter(
+                    PL_PCDU_ID, 0, ParamId.DISABLE_ORDER_CHECK_CHANNELS, False
+                )
+            )
+        )
+
     if op_code == OpCode.UPDATE_I_UPPER_LIMIT:
         q.add_log_cmd(Info.UPDATE_I_UPPER_LIMIT)
         print("Select device to update lower current limit for: ")
@@ -634,3 +674,31 @@ def dev_select_to_upper_u_update_param_id(dev_select: DevSelect) -> ParamId:
     if param_id is None:
         raise ValueError("invalid parameter ID")
     return param_id
+
+
+def prompt_custom_normal_submode() -> int:
+    print("Prompting custom submode.")
+    submode = 0
+
+    def prompt_channel(submode: int, channel_str: str, mask: NormalSubmodesMask) -> int:
+        while True:
+            channel_on = input(f" {channel_str} ON? [y/n]: ")
+            if channel_on in ["y", "1", "yes"]:
+                submode |= 1 << mask
+            elif channel_on in ["n", "0", "no"]:
+                pass
+            else:
+                _LOGGER.warning("invalid input, try again")
+                continue
+            break
+        return submode
+
+    submode = prompt_channel(
+        submode, "SSR", NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON
+    )
+    submode = prompt_channel(submode, "DRO", NormalSubmodesMask.DRO_ON)
+    submode = prompt_channel(submode, "X8", NormalSubmodesMask.X8_ON)
+    submode = prompt_channel(submode, "TX", NormalSubmodesMask.TX_ON)
+    submode = prompt_channel(submode, "MPA", NormalSubmodesMask.MPA_ON)
+    submode = prompt_channel(submode, "HPA", NormalSubmodesMask.HPA_ON)
+    return submode

eive_tmtc/tmtc/power/p60dock.py

@@ -28,10 +28,12 @@ from tmtccmd.util import ObjectIdU32
 
 
 class P60OpCode:
-    STACK_3V3_ON = ["stack_3v3_on", "1"]
-    STACK_3V3_OFF = ["stack_3v3_off", "2"]
-    STACK_5V_ON = ["stack_5v_on", "3"]
-    STACK_5V_OFF = ["stack_5v_off", "4"]
+    STACK_3V3_ON = "stack_3v3_on"
+    STACK_3V3_OFF = "stack_3v3_off"
+    STACK_5V_ON = "stack_5v_on"
+    STACK_5V_OFF = "stack_5v_off"
+    ACU_OFF = "acu_off"
+    ACU_ON = "acu_on"
     TEST = ["test", "0"]
 
 

eive_tmtc/tmtc/test.py

@@ -1,10 +1,15 @@
-from spacepackets.ecss import PusTelecommand, PusService
+import struct
+import datetime
+import math
+
+from spacepackets.ecss import PusService, PusTelecommand
 from tmtccmd.config import CoreServiceList
 from tmtccmd.config.tmtc import (
-    tmtc_definitions_provider,
-    TmtcDefinitionWrapper,
     OpCodeEntry,
+    TmtcDefinitionWrapper,
+    tmtc_definitions_provider,
 )
+from tmtccmd.pus.s11_tc_sched import create_time_tagged_cmd
 from tmtccmd.pus.s17_test import create_service_17_ping_command
 from tmtccmd.tmtc import service_provider
 from tmtccmd.tmtc.decorator import ServiceProviderParams
@@ -14,12 +19,14 @@ class OpCodes:
     PING = "ping"
     TRIGGER_EVENT = "trig_event"
     PING_WITH_DATA = "ping_with_data"
+    SCHEDULE_PING = "sched_ping"
 
 
 class Info:
     PING = "Simple Ping and Connection Test"
     TRIGGER_EVENT = "Trigger an event"
     PING_WITH_DATA = "Ping with data. Size of sent data is sent back"
+    SCHEDULE_PING = "Schedule a ping"
 
 
 @tmtc_definitions_provider
@@ -28,6 +35,7 @@ def add_test_defs(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCodes.PING, info=Info.PING)
     oce.add(keys=OpCodes.TRIGGER_EVENT, info=Info.TRIGGER_EVENT)
     oce.add(keys=OpCodes.PING_WITH_DATA, info=Info.PING_WITH_DATA)
+    oce.add(keys=OpCodes.SCHEDULE_PING, info=Info.SCHEDULE_PING)
 
     defs.add_service(
         name=CoreServiceList.SERVICE_17_ALT,
@@ -46,6 +54,21 @@ def pack_test_command(p: ServiceProviderParams):
     if info.op_code == OpCodes.TRIGGER_EVENT:
         q.add_log_cmd("Sending PUS TC Event Trigger [17, 128]")
         q.add_pus_tc(PusTelecommand(service=PusService.S17_TEST, subservice=128))
+    if info.op_code == OpCodes.SCHEDULE_PING:
+        q.add_log_cmd("Sending scheduled PUS ping")
+        # Generate a UNIX timestamp 30 seconds in the future using the datetime API with a UTC timezone
+        now = datetime.datetime.now(tz=datetime.timezone.utc)
+        second_offset_to_now = input("Please specify offset to now in seconds: ")
+        now += datetime.timedelta(seconds=int(second_offset_to_now))
+        unix_stamp = struct.pack("!I", math.floor(now.timestamp()))
+        print(f"Sending ping scheuled at {now}")
+        ping = PusTelecommand(service=PusService.S17_TEST, subservice=128)
+        q.add_pus_tc(
+            create_time_tagged_cmd(
+                release_time=unix_stamp,
+                tc_to_insert=ping,
+            )
+        )
     if info.op_code == OpCodes.PING_WITH_DATA:
         q.add_log_cmd("Sending Ping With Data, Size Reported Back [17, 129]")
         while True:

eive_tmtc/tmtc/tm_store.py

@@ -3,6 +3,7 @@ import enum
 import logging
 import math
 import struct
+from typing import Tuple
 
 from eive_tmtc.config.object_ids import (
     HK_TM_STORE,
@@ -19,20 +20,25 @@ from tmtccmd.tmtc import service_provider
 from tmtccmd.tmtc.decorator import ServiceProviderParams
 from dateutil.parser import parse
 
-from spacepackets.ecss import PusService  # noqa
 from spacepackets.ecss.tc import PusTelecommand
 from spacepackets.ecss.pus_15_tm_storage import Subservice
 from tmtccmd.util import ObjectIdU32
 
 
+class CustomSubservice(enum.IntEnum):
+    DELETE_BY_TIME_RANGE = 128
+
+
 class OpCode:
     RETRIEVAL_BY_TIME_RANGE = "retrieval_time_range"
     DELETE_UP_TO = "delete_up_to"
+    DELETE_BY_TIME_RANGE = "delete_time_range"
 
 
 class Info:
     RETRIEVAL_BY_TIME_RANGE = "Dump Telemetry Packets by time range"
     DELETE_UP_TO = "Delete Telemetry Packets up to time"
+    DELETE_BY_TIME_RANGE = "Delete Telemetry by time range"
 
 
 _LOGGER = logging.getLogger(__name__)
@@ -43,7 +49,7 @@ def pack_tm_store_commands(p: ServiceProviderParams):
     q = p.queue_helper
     o = p.op_code
     if o == OpCode.DELETE_UP_TO:
-        obj_id, store_string = store_select_prompt()
+        obj_id, _ = store_select_prompt()
         app_data = bytearray(obj_id.as_bytes)
         delete_up_to_time = time_prompt("Determining deletion end time")
         end_stamp = int(math.floor(delete_up_to_time.timestamp()))
@@ -58,7 +64,7 @@ def pack_tm_store_commands(p: ServiceProviderParams):
         )
     elif o == OpCode.RETRIEVAL_BY_TIME_RANGE:
         q.add_log_cmd(Info.RETRIEVAL_BY_TIME_RANGE)
-        obj_id, store_string = store_select_prompt()
+        obj_id, _ = store_select_prompt()
         app_data = bytearray(obj_id.as_bytes)
         start_of_dump_time = time_prompt("Determining retrieval start time")
         start_stamp = int(math.floor(start_of_dump_time.timestamp()))
@@ -78,6 +84,28 @@ def pack_tm_store_commands(p: ServiceProviderParams):
                 app_data=app_data,
             )
         )
+    elif o == OpCode.DELETE_BY_TIME_RANGE:
+        q.add_log_cmd(Info.DELETE_BY_TIME_RANGE)
+        obj_id, _ = store_select_prompt()
+        app_data = bytearray(obj_id.as_bytes)
+        start_of_dump_time = time_prompt("Determining deletion start time")
+        start_stamp = int(math.floor(start_of_dump_time.timestamp()))
+        end_of_dump_time = time_prompt("Determining deletion end time")
+        end_stamp = int(math.floor(end_of_dump_time.timestamp()))
+        app_data.extend(struct.pack("!I", start_stamp))
+        app_data.extend(struct.pack("!I", end_stamp))
+        q.add_log_cmd(Info.DELETE_BY_TIME_RANGE)
+        q.add_log_cmd(f"Selected Store: {obj_id}")
+        q.add_log_cmd(
+            f"Deletion from time {start_of_dump_time} up to time {end_of_dump_time}"
+        )
+        q.add_pus_tc(
+            PusTelecommand(
+                service=15,
+                subservice=CustomSubservice.DELETE_BY_TIME_RANGE,
+                app_data=app_data,
+            )
+        )
 
 
 @tmtc_definitions_provider
@@ -85,6 +113,7 @@ def add_persistent_tm_store_cmd_defs(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
     oce.add(keys=OpCode.DELETE_UP_TO, info=Info.DELETE_UP_TO)
     oce.add(keys=OpCode.RETRIEVAL_BY_TIME_RANGE, info=Info.RETRIEVAL_BY_TIME_RANGE)
+    oce.add(keys=OpCode.DELETE_BY_TIME_RANGE, info=Info.DELETE_BY_TIME_RANGE)
     defs.add_service(
         CustomServiceList.TM_STORE, "Persistent TM Store", op_code_entry=oce
     )
@@ -130,6 +159,8 @@ def time_prompt(info_str: str) -> datetime.datetime:
         return time_prompt_fully_manually()
     elif time_input_key == 2:
         return time_prompt_offset_from_now()
+    else:
+        raise ValueError()
 
 
 def time_prompt_fully_manually() -> datetime.datetime:
@@ -160,7 +191,7 @@ def time_prompt_offset_from_now() -> datetime.datetime:
     return time_now_with_offset
 
 
-def store_select_prompt() -> (ObjectIdU32, str):
+def store_select_prompt() -> Tuple[ObjectIdU32, str]:
     obj_id_dict = get_object_ids()
     print("Available TM stores:")
     for k, v in STORE_DICT.items():

pyproject.toml

@@ -6,7 +6,7 @@ build-backend = "setuptools.build_meta"
 name = "eive-tmtc"
 description = "TMTC Commander EIVE"
 readme = "README.md"
-version = "5.10.1"
+version = "5.13.0"
 requires-python = ">=3.10"
 license = {text = "Apache-2.0"}
 authors = [