bump minor version

Reviewed-on: #182

CHANGELOG.md

@@ -10,6 +10,27 @@ list yields a list of all related PRs for each release.
 
 # [unreleased]
 
+# [v2.22.0] 2023-04-07
+
+- Various smaller and helper commands added for tests
+- Update generated files
+
+# [v2.21.0] 2023-04-04
+
+## Added
+
+- Add boot mode command for EIVE system.
+
+## Changed
+
+- PCDU switcher set now includes the 3V3 stack switcher state.
+
+# [v2.20.1] 2023-04-01
+
+## Fixed
+
+- MEKF: Handle NOT_FINITE status (key 5)
+
 # [v2.20.0] 2023-03-28
 
 ## Changed

eive_tmtc/__init__.py

@@ -1,11 +1,11 @@
-__version__ = "2.20.0"
+__version__ = "2.22.0"
 
 import logging
 from pathlib import Path
 
 SW_NAME = "eive-tmtc"
 VERSION_MAJOR = 2
-VERSION_MINOR = 20
+VERSION_MINOR = 22
 VERSION_REVISION = 0
 
 EIVE_TMTC_ROOT = Path(__file__).parent

eive_tmtc/config/events.csv

@@ -101,8 +101,8 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
 11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/tcs/HeaterHandler.h
 11403;0x2c8b;HEATER_WENT_OFF;INFO;No description;mission/tcs/HeaterHandler.h
-11404;0x2c8c;SWITCH_ALREADY_ON;LOW;No description;mission/tcs/HeaterHandler.h
-11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;No description;mission/tcs/HeaterHandler.h
+11404;0x2c8c;SWITCH_ALREADY_ON;INFO;No description;mission/tcs/HeaterHandler.h
+11405;0x2c8d;SWITCH_ALREADY_OFF;INFO;No description;mission/tcs/HeaterHandler.h
 11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;No description;mission/tcs/HeaterHandler.h
 11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;No description;mission/tcs/HeaterHandler.h
 11500;0x2cec;BURN_PHASE_START;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/SolarArrayDeploymentHandler.h
@@ -203,6 +203,7 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/AcsBoardAssembly.h
 12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/AcsBoardAssembly.h
 12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/acs/AcsBoardAssembly.h
+12804;0x3204;DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY;MEDIUM;This is triggered when the assembly would have normally switched the board side, but the GPS device of the other side was marked faulty. P1: Current submode.;mission/system/acs/AcsBoardAssembly.h
 12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/acs/SusAssembly.h
 12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/SusAssembly.h
 12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/SusAssembly.h
@@ -250,23 +251,24 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 13903;0x364f;INSERT_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13904;0x3650;WRITE_CONFIGFILE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13905;0x3651;READ_CONFIGFILE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
-14000;0x36b0;ALLOC_FAILURE;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14001;0x36b1;REBOOT_SW;LOW; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
-14002;0x36b2;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
-14003;0x36b3;REBOOT_HW;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14004;0x36b4;NO_SD_CARD_ACTIVE;HIGH;No SD card was active. Core controller will attempt to re-initialize a SD card.;bsp_q7s/core/CoreController.h
-14005;0x36b5;VERSION_INFO;INFO;P1: Byte 0: Major, Byte 1: Minor, Byte 2: Patch, Byte 3: Has Git Hash P2: First four letters of Git SHA is the last byte of P1 is set.;bsp_q7s/core/CoreController.h
-14006;0x36b6;CURRENT_IMAGE_INFO;INFO;P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
-14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;bsp_q7s/core/CoreController.h
-14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;bsp_q7s/core/CoreController.h
-14010;0x36ba;I2C_UNAVAILABLE_REBOOT;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/ThermalController.h
-14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/ThermalController.h
-14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14103;0x3717;PLOC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14105;0x3719;HPA_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14106;0x371a;PLPCDU_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
+14000;0x36b0;ALLOC_FAILURE;MEDIUM;No description;mission/sysDefs.h
+14001;0x36b1;REBOOT_SW;LOW; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;mission/sysDefs.h
+14002;0x36b2;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;mission/sysDefs.h
+14003;0x36b3;REBOOT_HW;MEDIUM;No description;mission/sysDefs.h
+14004;0x36b4;NO_SD_CARD_ACTIVE;HIGH;No SD card was active. Core controller will attempt to re-initialize a SD card.;mission/sysDefs.h
+14005;0x36b5;VERSION_INFO;INFO;P1: Byte 0: Major, Byte 1: Minor, Byte 2: Patch, Byte 3: Has Git Hash P2: First four letters of Git SHA is the last byte of P1 is set.;mission/sysDefs.h
+14006;0x36b6;CURRENT_IMAGE_INFO;INFO;P1: Current Chip, P2: Current Copy;mission/sysDefs.h
+14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;mission/sysDefs.h
+14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;mission/sysDefs.h
+14010;0x36ba;TRYING_I2C_RECOVERY;MEDIUM;I2C is unavailable. Trying recovery of I2C bus by power cycling all I2C devices.;mission/sysDefs.h
+14011;0x36bb;I2C_REBOOT;MEDIUM;I2C is unavailable. Recovery did not work, performing full reboot.;mission/sysDefs.h
+14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/tcsDefs.h
+14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/tcsDefs.h
+14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14105;0x3719;CAMERA_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14106;0x371a;PCDU_SYSTEM_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14107;0x371b;HEATER_NOT_OFF_FOR_OFF_MODE;MEDIUM;No description;mission/controller/tcsDefs.h
 14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/com/ComSubsystem.h
 14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/com/ComSubsystem.h
 14300;0x37dc;POSSIBLE_FILE_CORRUPTION;LOW;P1: Result code of TM packet parser. P2: Timestamp of possibly corrupt file as a unix timestamp.;mission/persistentTmStoreDefs.h

eive_tmtc/config/object_ids.py

@@ -49,6 +49,9 @@ GYRO_1_L3G_HANDLER_ID = bytes([0x44, 0x12, 0x01, 0x11])
 GYRO_2_ADIS_HANDLER_ID = bytes([0x44, 0x12, 0x02, 0x12])
 GYRO_3_L3G_HANDLER_ID = bytes([0x44, 0x12, 0x03, 0x13])
 GPS_CONTROLLER = bytes([0x44, 0x13, 0x00, 0x45])
+GPS_0_HEALTH_DEV = bytes([0x44, 0x13, 0x00, 0x46])
+GPS_1_HEALTH_DEV = bytes([0x44, 0x13, 0x00, 0x47])
+
 RW1_ID = bytes([0x44, 0x12, 0x00, 0x47])
 RW2_ID = bytes([0x44, 0x12, 0x01, 0x48])
 RW3_ID = bytes([0x44, 0x12, 0x02, 0x49])

eive_tmtc/config/objects.csv

@@ -29,6 +29,8 @@
 0x44120350;RW4
 0x44130001;STAR_TRACKER
 0x44130045;GPS_CONTROLLER
+0x44130046;GPS_0_HEALTH_DEV
+0x44130047;GPS_1_HEALTH_DEV
 0x44140013;IMTQ_POLLING
 0x44140014;IMTQ_HANDLER
 0x442000A1;PCDU_HANDLER

eive_tmtc/config/returnvalues.csv

@@ -371,8 +371,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x3e03;HKM_PeriodicHelperInvalid;No description;3;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
 0x3e04;HKM_PoolobjectNotFound;No description;4;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
 0x3e05;HKM_DatasetNotFound;No description;5;HOUSEKEEPING_MANAGER;fsfw/src/fsfw/datapoollocal/LocalDataPoolManager.h
-0x3f01;DLEE_NoPacketFound;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
-0x3f02;DLEE_PossiblePacketLoss;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleParser.h
+0x3f01;DLEE_StreamTooShort;No description;1;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
+0x3f02;DLEE_DecodingError;No description;2;DLE_ENCODER;fsfw/src/fsfw/globalfunctions/DleEncoder.h
 0x4201;PUS11_InvalidTypeTimeWindow;No description;1;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4202;PUS11_InvalidTimeWindow;No description;2;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4203;PUS11_TimeshiftingNotPossible;No description;3;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
@@ -402,9 +402,12 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x4403;UXOS_CommandError;Command execution failed;3;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
 0x4404;UXOS_NoCommandLoadedOrPending;;4;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
 0x4406;UXOS_PcloseCallError;No description;6;LINUX_OSAL;fsfw/src/fsfw_hal/linux/CommandExecutor.h
-0x4500;HSPI_OpeningFileFailed;No description;0;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
-0x4501;HSPI_FullDuplexTransferFailed;No description;1;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
-0x4502;HSPI_HalfDuplexTransferFailed;No description;2;HAL_SPI;fsfw/src/fsfw_hal/linux/spi/SpiComIF.h
+0x4500;HSPI_OpeningFileFailed;No description;0;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4501;HSPI_FullDuplexTransferFailed;No description;1;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4502;HSPI_HalfDuplexTransferFailed;No description;2;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4503;HSPI_Timeout;No description;3;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4504;HSPI_Busy;No description;4;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
+0x4505;HSPI_GenericError;No description;5;HAL_SPI;fsfw/src/fsfw_hal/common/spi/spiCommon.h
 0x4601;HURT_UartReadFailure;No description;1;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
 0x4602;HURT_UartReadSizeMissmatch;No description;2;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
 0x4603;HURT_UartRxBufferTooSmall;No description;3;HAL_UART;fsfw/src/fsfw_hal/linux/serial/SerialComIF.h
@@ -440,7 +443,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x5106;IMTQ_InternalProcessingError;No description;6;IMTQ_HANDLER;mission/acs/imtqHelpers.h
 0x5107;IMTQ_RejectedWithoutReason;No description;7;IMTQ_HANDLER;mission/acs/imtqHelpers.h
 0x5108;IMTQ_CmdErrUnknown;No description;8;IMTQ_HANDLER;mission/acs/imtqHelpers.h
-0x51a7;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;167;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x5109;IMTQ_StartupCfgError;No description;9;IMTQ_HANDLER;mission/acs/imtqHelpers.h
+0x510a;IMTQ_UnexpectedSelfTestReply;The status reply to a self test command was received but no self test command has been sent. This should normally never happen.;10;IMTQ_HANDLER;mission/acs/imtqHelpers.h
 0x52b0;RWHA_SpiWriteFailure;No description;176;RW_HANDLER;mission/acs/rwHelpers.h
 0x52b1;RWHA_SpiReadFailure;Used by the spi send function to tell a failing read call;177;RW_HANDLER;mission/acs/rwHelpers.h
 0x52b2;RWHA_MissingStartSign;Can be used by the HDLC decoding mechanism to inform about a missing start sign 0x7E;178;RW_HANDLER;mission/acs/rwHelpers.h
@@ -492,8 +496,6 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x58a3;SUSS_ExecutionFailed;Command execution failed;163;SUS_HANDLER;mission/acs/RwHandler.h
 0x58a4;SUSS_CrcError;Reaction wheel reply has invalid crc;164;SUS_HANDLER;mission/acs/RwHandler.h
 0x58a5;SUSS_ValueNotRead;No description;165;SUS_HANDLER;mission/acs/RwHandler.h
-0x5900;IPCI_NoReplyAvailable;No description;0;CCSDS_IP_CORE_BRIDGE;linux/acs/ImtqPollingTask.h
-0x5901;IPCI_NoPacketFound;No description;1;CCSDS_IP_CORE_BRIDGE;linux/com/SyrlinksComHandler.h
 0x59a0;IPCI_PapbBusy;No description;160;CCSDS_IP_CORE_BRIDGE;linux/ipcore/PapbVcInterface.h
 0x5aa0;PTME_UnknownVcId;No description;160;PTME;linux/ipcore/Ptme.h
 0x5c01;STRHLP_SdNotMounted;SD card specified in path string not mounted;1;STR_HELPER;linux/acs/StrComHandler.h
@@ -541,7 +543,6 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x63a0;NVMB_KeyNotExists;Specified key does not exist in json file;160;NVM_PARAM_BASE;mission/memory/NvmParameterBase.h
 0x64a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;160;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
 0x64a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;161;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
-0x6502;PLMPHLP_InvalidCrc;No description;2;PLOC_MPSOC_HELPER;linux/payload/ScexHelper.h
 0x65a0;PLMPHLP_FileClosedAccidentally;File accidentally close;160;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocHelper.h
 0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
 0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h

eive_tmtc/tmtc/acs/acs_ctrl.py

@@ -989,6 +989,7 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
         2: "NO_MODEL_VECTORS",
         3: "NO_SUS_MGM_STR_DATA",
         4: "COVARIANCE_INVERSION_FAILED",
+        5: "NOT_FINITE",
         10: "INITIALIZED",
         11: "RUNNING",
     }
@@ -1016,7 +1017,10 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
     current_idx += inc_len_vec
     status = struct.unpack(fmt_sts, hk_data[current_idx : current_idx + inc_len_sts])[0]
     current_idx += inc_len_sts
-    pw.dlog(f"{'MEKF Status'.ljust(25)}: {mekf_status[status]}")
+    if mekf_status.get(status) is not None:
+        pw.dlog(f"{'MEKF Status'.ljust(25)}: {mekf_status[status]}")
+    else:
+        pw.dlog(f"{'MEKF Raw Status (key unknown)'.ljust(25)}: {status}")
     pw.dlog(f"{'MEKF Quaternion'.ljust(25)}: {fmt_str_4.format(*quat)}")
     pw.dlog(f"{'MEKF Rotational Rate'.ljust(25)}: {fmt_str_3.format(*rates)}")
     pw.printer.print_validity_buffer(hk_data[current_idx:], num_vars=3)

eive_tmtc/tmtc/acs/gps.py

@@ -7,6 +7,7 @@ from eive_tmtc.config.definitions import CustomServiceList
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from tmtccmd.config import TmtcDefinitionWrapper, OpCodeEntry
 from tmtccmd.config.tmtc import tmtc_definitions_provider
+from tmtccmd.tc.pus_200_fsfw_mode import create_mode_command, Mode
 from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.tc.pus_3_fsfw_hk import (
     make_sid,
@@ -20,6 +21,8 @@ _LOGGER = logging.getLogger(__name__)
 
 
 class OpCode:
+    OFF = "off"
+    ON = "on"
     REQ_OS_HK = ["hk"]
     ENABLE_HK = ["enable_hk"]
     DISABLE_HK = ["disable_hk"]
@@ -27,6 +30,8 @@ class OpCode:
 
 
 class Info:
+    OFF = "Off"
+    ON = "On"
     REQ_OS_HK = "Request One-Shot HK"
     ENABLE_HK = "Enable HK"
     DISABLE_HK = "Disable HK"
@@ -44,6 +49,8 @@ def add_gps_cmds(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK)
     oce.add(keys=OpCode.ENABLE_HK, info=Info.ENABLE_HK)
     oce.add(keys=OpCode.DISABLE_HK, info=Info.DISABLE_HK)
+    oce.add(keys=OpCode.OFF, info=Info.OFF)
+    oce.add(keys=OpCode.ON, info=Info.ON)
     defs.add_service(
         name=CustomServiceList.GPS_CTRL.value,
         info="GPS/GNSS Controller",
@@ -72,6 +79,12 @@ def pack_gps_command(object_id: bytes, q: DefaultPusQueueHelper, op_code: str):
     if op_code in OpCode.REQ_OS_HK:
         q.add_log_cmd(f"GPS: {Info.REQ_OS_HK}")
         q.add_pus_tc(create_request_one_hk_command(sid=sid))
+    if op_code in OpCode.ON:
+        q.add_log_cmd(f"GPS: {Info.ON}")
+        q.add_pus_tc(create_mode_command(object_id, Mode.ON, 0))
+    if op_code in OpCode.OFF:
+        q.add_log_cmd(f"GPS: {Info.OFF}")
+        q.add_pus_tc(create_mode_command(object_id, Mode.OFF, 0))
 
 
 def handle_gps_data(printer: FsfwTmTcPrinter, hk_data: bytes):

eive_tmtc/tmtc/acs/reaction_wheels.py

@@ -20,6 +20,7 @@ from tmtccmd.tc.pus_3_fsfw_hk import (
     enable_periodic_hk_command_with_interval,
     disable_periodic_hk_command,
 )
+from tmtccmd.tc.pus_8_fsfw_funccmd import create_action_cmd
 from spacepackets.ecss.tc import PusTelecommand
 from tmtccmd.tc.pus_200_fsfw_mode import pack_mode_data, Mode, Subservice
 from eive_tmtc.config.definitions import CustomServiceList
@@ -28,14 +29,15 @@ from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
 
 class OpCodesDev:
-    SPEED = ["0", "speed"]
-    ON = ["1", "on"]
-    NML = ["2", "nml"]
-    OFF = ["3", "off"]
-    GET_STATUS = ["4", "status"]
-    GET_TM = ["5", "tm"]
-    ENABLE_STATUS_HK = ["6", "enable_status_hk"]
-    DISABLE_STATUS_HK = ["7", "disable_status_hk"]
+    SPEED = "speed"
+    ON = "on"
+    NML = "nml"
+    OFF = "off"
+    GET_STATUS = "status"
+    GET_TM = "get_tm_set"
+    REQ_TM = "req_tm_set"
+    ENABLE_STATUS_HK = "enable_status_hk"
+    DISABLE_STATUS_HK = "disable_status_hk"
 
 
 class InfoDev:
@@ -45,6 +47,7 @@ class InfoDev:
     OFF = "Set Off"
     GET_STATUS = "Get Status HK"
     GET_TM = "Get TM HK"
+    REQ_TM = "Request TM HK"
     ENABLE_STATUS_HK = "Enable Status HK"
     DISABLE_STATUS_HK = "Disable Status HK"
 
@@ -57,6 +60,10 @@ class OpCodesAss:
     ALL_SPEED_OFF = ["4", "speed_off"]
 
 
+class ActionId:
+    REQUEST_TM = 9
+
+
 class InfoAss:
     ON = "Mode On: 3/4 RWs min. on"
     NML = "Mode Normal: 3/4 RWs min. normal"
@@ -99,6 +106,7 @@ def add_rw_cmds(defs: TmtcDefinitionWrapper):
     oce.add(info=InfoDev.ON, keys=OpCodesDev.ON)
     oce.add(info=InfoDev.OFF, keys=OpCodesDev.OFF)
     oce.add(info=InfoDev.NML, keys=OpCodesDev.NML)
+    oce.add(info=InfoDev.REQ_TM, keys=OpCodesDev.REQ_TM)
     oce.add(info=InfoDev.GET_STATUS, keys=OpCodesDev.GET_STATUS)
     oce.add(info=InfoDev.GET_TM, keys=OpCodesDev.GET_TM)
     oce.add(info=InfoDev.ENABLE_STATUS_HK, keys=OpCodesDev.ENABLE_STATUS_HK)
@@ -139,7 +147,7 @@ def add_rw_cmds(defs: TmtcDefinitionWrapper):
 def pack_single_rw_test_into(
     object_id: bytes, rw_idx: int, q: DefaultPusQueueHelper, op_code: str
 ):
-    if op_code in OpCodesDev.SPEED:
+    if op_code == OpCodesDev.SPEED:
         speed, ramp_time = prompt_speed_ramp_time()
         q.add_log_cmd(
             f"RW {rw_idx}: {InfoDev.SPEED} with target "
@@ -147,28 +155,33 @@ def pack_single_rw_test_into(
         )
         q.add_pus_tc(pack_set_speed_command(object_id, speed, ramp_time))
 
-    if op_code in OpCodesDev.ON:
+    if op_code == OpCodesDev.ON:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.ON}")
         mode_data = pack_mode_data(object_id, Mode.ON, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDev.NML:
+    if op_code == OpCodesDev.NML:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.NML}")
         mode_data = pack_mode_data(object_id, Mode.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDev.OFF:
+    if op_code == OpCodesDev.OFF:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.OFF}")
         mode_data = pack_mode_data(object_id, Mode.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDev.GET_TM:
+    if op_code == OpCodesDev.GET_TM:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.GET_TM}")
         q.add_pus_tc(
             generate_one_hk_command(
                 sid=make_sid(object_id=object_id, set_id=RwSetId.TM_SET)
             )
         )
+    if op_code == OpCodesDev.REQ_TM:
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.REQ_TM}")
+        q.add_pus_tc(
+            create_action_cmd(object_id=object_id, action_id=ActionId.REQUEST_TM)
+        )
     if op_code in OpCodesDev.GET_STATUS:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.GET_STATUS}")
         q.add_pus_tc(

eive_tmtc/tmtc/acs/star_tracker.py

@@ -21,6 +21,7 @@ from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.tc.pus_200_fsfw_mode import pack_mode_data, Mode
 from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
+from eive_tmtc.config.object_ids import STR_ASSEMBLY, STAR_TRACKER_ID
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -97,12 +98,19 @@ class OpCodes:
     NORMAL = "nml"
     OFF = "off"
     PING = "ping"
-    REQUEST_SOLUTION_SET = "request_sol_set"
+    REQUEST_SOLUTION_SET_HK = "hk_req_sol"
+    REQUEST_SOLUTION_SET_ACTION = "action_req_sol"
     TAKE_IMAGE = "take_image"
+    UPLOAD_IMAGE = "upload_image"
+    SET_IMG_PROCESSOR_MODE = "set_img_proc_mode"
 
 
 class Info:
-    REQUEST_SOLUTION_SET = "Request Solution Set HK once"
+    REQUEST_SOLUTION_SET_HK = "Request Solution Set HK once"
+    REQUEST_SOLUTION_SET_ACTION = "Request Solution Set Action"
+    UPLOAD_IMAGE = "Upload Image"
+    TAKE_IMAGE = "Take Image"
+    SET_IMG_PROCESSOR_MODE = "Set Image Processor Mode"
 
 
 class SetId(enum.IntEnum):
@@ -128,7 +136,7 @@ class FileDefs:
     egse_histogram_upload_img_config = (
         "/home/pi/arcsec/json/upload-image-histogram.json"
     )
-    q7s_ground_config = "/mnt/sd0/startracker/json/ground-config.json"
+    q7s_ground_config = "/mnt/sd0/startracker/ground-config.json"
     q7s_flight_config = "/mnt/sd0/startracker/flight-config.json"
     firmware2_1 = "/home/pi/arcsec/firmware/sagitta-2-1.bin"
     firmware22_1 = "/home/pi/arcsec/firmware/sagitta-22-1.bin"
@@ -136,31 +144,31 @@ class FileDefs:
 
 
 json_dict = {
-    "1": ["Q7S flight config", FileDefs.q7s_flight_config],
-    "2": ["Q7S ground config", FileDefs.q7s_ground_config],
-    "3": ["EGSE flight config", FileDefs.egse_flight_config],
-    "4": ["EGSE ground config", FileDefs.egse_ground_config],
-    "5": [
+    "1": ("Q7S flight config", FileDefs.q7s_flight_config),
+    "2": ("Q7S ground config", FileDefs.q7s_ground_config),
+    "3": ("EGSE flight config", FileDefs.egse_flight_config),
+    "4": ("EGSE ground config", FileDefs.egse_ground_config),
+    "5": (
         "EGSE get solution, upload image config",
         FileDefs.egse_solution_upload_img_config,
-    ],
-    "6": [
+    ),
+    "6": (
         "EGSE get histogram, upload image config",
         FileDefs.egse_solution_upload_img_config,
-    ],
+    ),
 }
 
 firmware_dict = {
-    "1": ["Firmware Major = 2, Minor = 1", FileDefs.firmware2_1],
-    "2": ["Firmware Major = 22, Minor = 1", FileDefs.firmware22_1],
-    "3": ["Firmware Origin", FileDefs.firmware_origin],
+    "1": ("Firmware Major = 2, Minor = 1", FileDefs.firmware2_1),
+    "2": ("Firmware Major = 22, Minor = 1", FileDefs.firmware22_1),
+    "3": ("Firmware Origin", FileDefs.firmware_origin),
 }
 
 upload_image_dict = {
-    "1": ["q7s gemma", "/mnt/sd0/startracker/gemma.bin"],
-    "2": ["egse gemma", "/home/pi/arcsec/star-images/gemma.bin"],
-    "3": ["q7s polaris", "/mnt/sd0/startracker/polaris.bin"],
-    "4": ["egse polaris", "/home/pi/arcsec/star-images/polaris.bin"],
+    "1": ("q7s gemma", "/mnt/sd0/startracker/gemma.bin"),
+    "2": ("egse gemma", "/home/pi/arcsec/star-images/gemma.bin"),
+    "3": ("q7s polaris", "/mnt/sd0/startracker/polaris.bin"),
+    "4": ("egse polaris", "/home/pi/arcsec/star-images/polaris.bin"),
 }
 
 
@@ -181,6 +189,14 @@ class Submode(enum.IntEnum):
     FIRMWARE = 2
 
 
+def prompt_object_id_mode_cmd() -> bytes:
+    cmd_assy = input("Command Assembly (0) or Device Handler (1) ?: ")
+    if cmd_assy == "0":
+        return STR_ASSEMBLY
+    else:
+        return STAR_TRACKER_ID
+
+
 def pack_star_tracker_commands(
     object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_code: str
 ):
@@ -190,23 +206,27 @@ def pack_star_tracker_commands(
     obyt = object_id.as_bytes
     if op_code == OpCodes.ON_BOOTLOADER:
         q.add_log_cmd("Star tracker: Mode On, Submode Bootloader")
-        data = pack_mode_data(obyt, Mode.ON, Submode.BOOTLOADER)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.ON, Submode.BOOTLOADER)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
     if op_code == OpCodes.ON_FIRMWARE:
         q.add_log_cmd("Star tracker: Mode On, Submode Firmware")
-        data = pack_mode_data(obyt, Mode.ON, Submode.FIRMWARE)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.ON, Submode.FIRMWARE)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
     if op_code == OpCodes.NORMAL:
         q.add_log_cmd("Star tracker: Mode Normal")
-        data = pack_mode_data(obyt, Mode.NORMAL, 0)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
     if op_code == OpCodes.OFF:
         q.add_log_cmd("Star tracker: Mode Off")
-        data = pack_mode_data(obyt, Mode.OFF, 0)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.REQUEST_SOLUTION_SET:
-        q.add_log_cmd(Info.REQUEST_SOLUTION_SET)
+    if op_code == OpCodes.REQUEST_SOLUTION_SET_HK:
+        q.add_log_cmd(Info.REQUEST_SOLUTION_SET_HK)
         q.add_pus_tc(create_request_one_diag_command(make_sid(obyt, SetId.SOLUTION)))
+    if op_code == OpCodes.REQUEST_SOLUTION_SET_ACTION:
+        q.add_log_cmd("Star tracker: Request solution")
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_SOLUTION)
+        q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "4":
         q.add_log_cmd("Star tracker: Mode Raw")
         data = pack_mode_data(obyt, Mode.RAW, 0)
@@ -254,11 +274,7 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: Request time")
         data = obyt + struct.pack("!I", StarTrackerActionId.REQ_TIME)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == "14":
-        q.add_log_cmd("Star tracker: Request solution")
-        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_SOLUTION)
-        q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == "15":
+    if op_code == OpCodes.UPLOAD_IMAGE:
         q.add_log_cmd("Star tracker: Upload image")
         image = get_upload_image()
         data = (
@@ -361,7 +377,9 @@ def pack_star_tracker_commands(
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == OpCodes.TAKE_IMAGE:
         q.add_log_cmd("Star tracker: Take image")
-        actionid = int(input("Specify parameter ID (take image - 4): "))
+        actionid = int(
+            input("Specify parameter ID (4: take image, 7: get histogram): ")
+        )
         data = (
             obyt
             + struct.pack("!I", StarTrackerActionId.TAKE_IMAGE)
@@ -511,8 +529,8 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: Request limits")
         data = obyt + struct.pack("!I", StarTrackerActionId.REQ_LIMITS)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == "51":
-        q.add_log_cmd("Star tracker: Set image processor parameters")
+    if op_code == OpCodes.SET_IMG_PROCESSOR_MODE:
+        q.add_log_cmd(Info.SET_IMG_PROCESSOR_MODE)
         json_file = get_config_file()
         data = (
             obyt
@@ -798,10 +816,13 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce.add(OpCodes.ON_FIRMWARE, "Mode On, Submode Firmware")
     oce.add(OpCodes.NORMAL, "Mode Normal")
     oce.add(OpCodes.OFF, "Mode Off")
-    oce.add("4", "Star Tracker: Mode Raw")
+    # oce.add("4", "Star Tracker: Mode Raw")
     oce.add(OpCodes.PING, "Star Tracker: Ping")
     oce.add(OpCodes.TAKE_IMAGE, "Take Image")
-    oce.add(OpCodes.REQUEST_SOLUTION_SET, "Request Solution Set HK")
+    oce.add(OpCodes.REQUEST_SOLUTION_SET_HK, Info.REQUEST_SOLUTION_SET_HK)
+    oce.add(OpCodes.REQUEST_SOLUTION_SET_ACTION, Info.REQUEST_SOLUTION_SET_ACTION)
+    oce.add(OpCodes.UPLOAD_IMAGE, Info.UPLOAD_IMAGE)
+    oce.add(OpCodes.SET_IMG_PROCESSOR_MODE, Info.SET_IMG_PROCESSOR_MODE)
     oce.add("6", "Star Tracker: Switch to bootloader program")
     oce.add("7", "Star Tracker: Request temperature")
     oce.add("8", "Star Tracker: Request version")
@@ -811,7 +832,6 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce.add("12", "Star Tracker: Boot image (requires bootloader mode)")
     oce.add("13", "Star Tracker: Request time")
     oce.add("14", "Star Tracker: Request solution")
-    oce.add("15", "Star Tracker: Upload image")
     oce.add("16", "Star Tracker: Download image")
     oce.add("17", "Star Tracker: Set limit parameters")
     oce.add("17", "Star Tracker: Set limit parameters")
@@ -833,7 +853,6 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce.add("37", "Star Tracker: Get checksum")
     oce.add("49", "Star Tracker: Request camera parameter")
     oce.add("50", "Star Tracker: Request limits")
-    oce.add("51", "Star Tracker: Set image processor parameters")
     oce.add("52", "Star Tracker: (EGSE only) Load camera ground config")
     oce.add("53", "Star Tracker: (EGSE only) Load camera flight config")
     oce.add("54", "Star Tracker: Request log level parameters")

eive_tmtc/tmtc/com/syrlinks_handler.py

@@ -153,7 +153,7 @@ def pack_syrlinks_command(
         q.add_pus_tc(create_mode_command(obyt, Mode.OFF, 0))
     if op_code == OpCode.ON:
         q.add_log_cmd(f"{prefix}: {Info.ON}")
-        q.add_pus_tc(create_mode_command(obyt, Mode.ON, 0))
+        q.add_pus_tc(create_mode_command(obyt, Mode.ON, ComMode.RX_ONLY))
     if op_code == OpCode.NORMAL_RX_ONLY:
         normal_mode_cmd(q, Info.NORMAL_RX_ONLY, ComMode.RX_ONLY)
     if op_code == OpCode.NORMAL_RX_AND_TX_LOW_DATARATE:
@@ -307,7 +307,9 @@ def handle_syrlinks_rx_registers_dataset(printer: FsfwTmTcPrinter, hk_data: byte
     if rx_demod_n0 > 0:
         eb_to_n0 = 20 * math.log10(rx_demod_eb / rx_demod_n0) - 3
     else:
-        logging.getLogger(__name__).warning("RX Demod N0 is 0, can not calculate Eb to N0")
+        logging.getLogger(__name__).warning(
+            "RX Demod N0 is 0, can not calculate Eb to N0"
+        )
         eb_to_n0 = 0
     rx_data_rate_raw = hk_data[21]
     rx_data_rate = -1

eive_tmtc/tmtc/obj_prompt.py

@@ -2,6 +2,8 @@ from eive_tmtc.config.object_ids import (
     ACS_SUBSYSTEM_ID,
     ACS_CONTROLLER,
     IMTQ_HANDLER_ID,
+    GPS_0_HEALTH_DEV,
+    GPS_1_HEALTH_DEV,
     GYRO_0_ADIS_HANDLER_ID,
     GYRO_1_L3G_HANDLER_ID,
     ACS_BOARD_ASS_ID,
@@ -9,6 +11,10 @@ from eive_tmtc.config.object_ids import (
     SUS_BOARD_ASS_ID,
     MGM_0_LIS3_HANDLER_ID,
     MGM_1_RM3100_HANDLER_ID,
+    SUS_0_N_LOC_XFYFZM_PT_XF,
+    SUS_6_R_LOC_XFYBZM_PT_XF,
+    RW1_ID,
+    RW2_ID,
 )
 
 SUBSYSTEM_DICT = {
@@ -27,6 +33,11 @@ ACS_OBJ_DICT = {
     6: ("GYR 1 L3G", GYRO_1_L3G_HANDLER_ID),
     7: ("MGM 0 LIS3", MGM_0_LIS3_HANDLER_ID),
     8: ("MGM 1 RM3100", MGM_1_RM3100_HANDLER_ID),
+    9: ("GPS 0 Health Device", GPS_0_HEALTH_DEV),
+    10: ("SUS 0", SUS_0_N_LOC_XFYFZM_PT_XF),
+    11: ("SUS 6", SUS_6_R_LOC_XFYBZM_PT_XF),
+    12: ("RW 1", RW1_ID),
+    13: ("RW 2", RW2_ID),
 }
 
 

eive_tmtc/tmtc/power/power.py

@@ -71,6 +71,7 @@ class PcduSwitches(enum.IntEnum):
     PDU2_CH8_PAYLOAD_CAMERA = 17
 
     P60_DOCK_5V_STACK = 18
+    P60_DOCK_3V3_STACK = 19
 
 
 def pack_power_commands(q: DefaultPusQueueHelper, op_code: str):

eive_tmtc/tmtc/power/tm.py

@@ -566,7 +566,9 @@ def handle_pcdu_hk(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
         current_idx += len(PDU1_CHANNELS_NAMES)
         pdu2_vals = [hk_data[i + current_idx] for i in range(len(PDU2_CHANNELS_NAMES))]
         current_idx += len(PDU2_CHANNELS_NAMES)
-        p60_stack_val = hk_data[current_idx]
+        p60_stack_5v_val = hk_data[current_idx]
+        current_idx += 1
+        p60_stack_3v3_val = hk_data[current_idx]
         current_idx += 1
         pw.dlog("PDU1 Switcher States")
         for name, val in zip(PDU1_CHANNELS_NAMES, pdu1_vals):
@@ -574,5 +576,6 @@ def handle_pcdu_hk(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
         pw.dlog("PDU2 Switcher States")
         for name, val in zip(PDU2_CHANNELS_NAMES, pdu2_vals):
             pw.dlog(f"{name.ljust(25)}: {val}")
-        pw.dlog(f"{'P60 Dock 5V Stack'.ljust(25)}: {p60_stack_val}")
-        pw.printer.print_validity_buffer(hk_data[current_idx:], 3)
+        pw.dlog(f"{'P60 Dock 5V Stack'.ljust(25)}: {p60_stack_5v_val}")
+        pw.dlog(f"{'P60 Dock 3V3 Stack'.ljust(25)}: {p60_stack_3v3_val}")
+        pw.printer.print_validity_buffer(hk_data[current_idx:], 4)

eive_tmtc/tmtc/system.py

@@ -1,3 +1,5 @@
+import enum
+
 from eive_tmtc.config.definitions import CustomServiceList
 from eive_tmtc.tmtc.acs.subsystem import AcsMode
 from tmtccmd.config.tmtc import (
@@ -12,19 +14,34 @@ from tmtccmd.tc.pus_200_fsfw_mode import (
     Mode,
     create_announce_mode_recursive_command,
 )
+from tmtccmd.tc.pus_8_fsfw_funccmd import create_action_cmd
 from tmtccmd.tc.decorator import ServiceProviderParams
 
 
+class SystemMode:
+    BOOT = 5
+    SAFE = AcsMode.SAFE
+    IDLE = AcsMode.IDLE
+
+
+class ActionId(enum.IntEnum):
+    EXECUTE_I2C_REBOOT = 10
+
+
 class OpCode:
+    BOOT_MODE = "boot"
     SAFE_MODE = "safe"
     IDLE_MODE = "idle"
     ANNOUNCE_MODES = "announce_modes"
+    REBOOT_I2C = "reboot_i2c"
 
 
 class Info:
+    BOOT_MODE = "Command System into Boot Mode"
     SAFE_MODE = "Command System into Safe Mode"
     IDLE_MODE = "Command System into Idle Pointing Mode"
     ANNOUNCE_MODES = "Announce mode recursively"
+    REBOOT_I2C = "Reboot I2C bus"
 
 
 @service_provider(CustomServiceList.SYSTEM.value)
@@ -34,21 +51,29 @@ def build_system_cmds(p: ServiceProviderParams):
     prefix = "EIVE System"
     if o == OpCode.SAFE_MODE:
         q.add_log_cmd(f"{prefix}: {Info.SAFE_MODE}")
-        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, AcsMode.SAFE, 0))
+        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, SystemMode.SAFE, 0))
     elif o == OpCode.IDLE_MODE:
         q.add_log_cmd(f"{prefix}: {Info.IDLE_MODE}")
-        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, AcsMode.IDLE, 0))
+        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, SystemMode.IDLE, 0))
     elif o == OpCode.ANNOUNCE_MODES:
         q.add_log_cmd(f"{prefix}: {Info.ANNOUNCE_MODES}")
         q.add_pus_tc(create_announce_mode_recursive_command(EIVE_SYSTEM_ID))
+    elif o == OpCode.BOOT_MODE:
+        q.add_log_cmd(f"{prefix}: {Info.BOOT_MODE}")
+        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, SystemMode.BOOT, 0))
+    elif o == OpCode.REBOOT_I2C:
+        q.add_log_cmd(f"{prefix}: {Info.REBOOT_I2C}")
+        q.add_pus_tc(create_action_cmd(EIVE_SYSTEM_ID, ActionId.EXECUTE_I2C_REBOOT))
 
 
 @tmtc_definitions_provider
 def add_system_cmd_defs(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
+    oce.add(keys=OpCode.BOOT_MODE, info=Info.BOOT_MODE)
     oce.add(keys=OpCode.SAFE_MODE, info=Info.SAFE_MODE)
     oce.add(keys=OpCode.IDLE_MODE, info=Info.IDLE_MODE)
     oce.add(keys=OpCode.ANNOUNCE_MODES, info=Info.ANNOUNCE_MODES)
+    oce.add(keys=OpCode.REBOOT_I2C, info=Info.REBOOT_I2C)
     defs.add_service(
         name=CustomServiceList.SYSTEM.value,
         info="EIVE system commands",