v3.0.0

Reviewed-on: #184
Reviewed-by: Robin Müller <muellerr@irs.uni-stuttgart.de>

CHANGELOG.md

@@ -10,6 +10,72 @@ list yields a list of all related PRs for each release.
 
 # [unreleased]
 
+# [v3.0.0] 2023-04-14
+
+## Fixed
+
+- Bugfix for STR solution set format.
+- Update for STR commands.
+
+## Added
+
+- Added core commands to execute `systemctl` commands and to execute arbitrary Linux commands.
+
+# [v2.22.1] 2023-04-12
+
+## Added
+
+- Prompts to specify custom filename for OBSW update
+
+# [v2.22.0] 2023-04-07
+
+- Various smaller and helper commands added for tests
+- Update generated files
+
+# [v2.21.0] 2023-04-04
+
+## Added
+
+- Add boot mode command for EIVE system.
+
+## Changed
+
+- PCDU switcher set now includes the 3V3 stack switcher state.
+
+# [v2.20.1] 2023-04-01
+
+## Fixed
+
+- MEKF: Handle NOT_FINITE status (key 5)
+
+# [v2.20.0] 2023-03-28
+
+## Changed
+
+- COM `Submode` enum moved from subsystem module to separate definitions module and renamed
+  to `Mode`. Added re-imports with the name `ComMode` in the subsystem and syrlinks module.
+- Convert various enums to proper `IntEnum`s
+- Updates for some enumerations.
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/178
+
+## Fixed
+
+- Eb to N0 calculation: Improve robustness against division by zero.
+- Some fixes for PCDU commands: Wrongfully packed command to switch devices off instead of on.
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/180.
+
+## Added
+
+- Added `PcduSwitches` enum.
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/179
+
+# [v2.19.4] 2023-03-24
+
+## Fixed
+
+- Correction for Syrlinks submodes
+- Update generated files
+
 # [v2.19.3] 2023-03-21
 
 - Update generated files

eive_tmtc/__init__.py

@@ -1,12 +1,12 @@
-__version__ = "2.19.3"
+__version__ = "3.0.0"
 
 import logging
 from pathlib import Path
 
 SW_NAME = "eive-tmtc"
-VERSION_MAJOR = 2
-VERSION_MINOR = 19
-VERSION_REVISION = 3
+VERSION_MAJOR = 3
+VERSION_MINOR = 0
+VERSION_REVISION = 0
 
 EIVE_TMTC_ROOT = Path(__file__).parent
 PACKAGE_ROOT = EIVE_TMTC_ROOT.parent

eive_tmtc/config/events.csv

@@ -86,195 +86,206 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 10802;0x2a32;SERIALIZATION_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10803;0x2a33;FILESTORE_ERROR;LOW;No description;fsfw/src/fsfw/cfdp/handler/defs.h
 10804;0x2a34;FILENAME_TOO_LARGE_ERROR;LOW;P1: Transaction step ID, P2: 0 for source file name, 1 for dest file name;fsfw/src/fsfw/cfdp/handler/defs.h
-11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;No description;mission/acsDefs.h
-11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;No description;mission/acsDefs.h
-11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;No description;mission/acsDefs.h
-11203;0x2bc3;MEKF_INVALID_INFO;INFO;No description;mission/acsDefs.h
-11204;0x2bc4;MEKF_INVALID_MODE_VIOLATION;HIGH;No description;mission/acsDefs.h
-11205;0x2bc5;SAFE_MODE_CONTROLLER_FAILURE;HIGH;No description;mission/acsDefs.h
-11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
-11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
-11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/devices/devicedefinitions/powerDefinitions.h
-11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/devices/devicedefinitions/powerDefinitions.h
-11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;No description;mission/devices/HeaterHandler.h
-11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/devices/HeaterHandler.h
-11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/devices/HeaterHandler.h
-11403;0x2c8b;HEATER_WENT_OFF;INFO;No description;mission/devices/HeaterHandler.h
-11404;0x2c8c;SWITCH_ALREADY_ON;LOW;No description;mission/devices/HeaterHandler.h
-11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;No description;mission/devices/HeaterHandler.h
-11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;No description;mission/devices/HeaterHandler.h
-11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;No description;mission/devices/HeaterHandler.h
-11500;0x2cec;BURN_PHASE_START;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/devices/SolarArrayDeploymentHandler.h
-11501;0x2ced;BURN_PHASE_DONE;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/devices/SolarArrayDeploymentHandler.h
-11502;0x2cee;MAIN_SWITCH_ON_TIMEOUT;LOW;No description;mission/devices/SolarArrayDeploymentHandler.h
-11503;0x2cef;MAIN_SWITCH_OFF_TIMEOUT;LOW;No description;mission/devices/SolarArrayDeploymentHandler.h
-11504;0x2cf0;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
-11505;0x2cf1;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
-11506;0x2cf2;DEPL_SA1_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
-11507;0x2cf3;DEPL_SA2_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/devices/SolarArrayDeploymentHandler.h
-11508;0x2cf4;AUTONOMOUS_DEPLOYMENT_COMPLETED;INFO;No description;mission/devices/SolarArrayDeploymentHandler.h
-11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/devices/ploc/PlocMPSoCHandler.h
-11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
-11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
-11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
-11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
-11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/devices/ploc/PlocMPSoCHandler.h
-11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
-11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
-11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
-11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
-11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
-11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
-11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/ImtqHandler.h
-11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/ImtqHandler.h
-11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/devicedefinitions/rwHelpers.h
-11802;0x2e1a;RESET_OCCURED;LOW;No description;mission/devices/devicedefinitions/rwHelpers.h
-11901;0x2e7d;BOOTING_FIRMWARE_FAILED_EVENT;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
-11902;0x2e7e;BOOTING_BOOTLOADER_FAILED_EVENT;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
-12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
-12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/devices/ploc/PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/devices/ploc/PlocSupervisorHandler.h
-12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
-12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/devices/ploc/PlocSupervisorHandler.h
-12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
-12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/devices/ploc/PlocSupervisorHandler.h
-12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/devices/ploc/PlocSupervisorHandler.h
+11200;0x2bc0;SAFE_RATE_VIOLATION;MEDIUM;The limits for the rotation in safe mode were violated.;mission/acs/defs.h
+11201;0x2bc1;SAFE_RATE_RECOVERY;MEDIUM;The system has recovered from a safe rate rotation violation.;mission/acs/defs.h
+11202;0x2bc2;MULTIPLE_RW_INVALID;HIGH;Multiple RWs are invalid, uncommandable and therefore higher ACS modes cannot be maintained.;mission/acs/defs.h
+11203;0x2bc3;MEKF_INVALID_INFO;INFO;MEKF was not able to compute a solution. P1: MEKF state on exit;mission/acs/defs.h
+11204;0x2bc4;MEKF_RECOVERY;INFO;MEKF is able to compute a solution again.;mission/acs/defs.h
+11205;0x2bc5;MEKF_AUTOMATIC_RESET;INFO;MEKF performed an automatic reset after detection of nonfinite values.;mission/acs/defs.h
+11206;0x2bc6;MEKF_INVALID_MODE_VIOLATION;HIGH;MEKF was not able to compute a solution during any pointing ACS mode for a prolonged time.;mission/acs/defs.h
+11207;0x2bc7;SAFE_MODE_CONTROLLER_FAILURE;HIGH;The ACS safe mode controller was not able to compute a solution and has failed. P1: Missing information about magnetic field, P2: Missing information about rotational rate;mission/acs/defs.h
+11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/power/defs.h
+11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/power/defs.h
+11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/power/defs.h
+11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/power/defs.h
+11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
+11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;No description;mission/tcs/HeaterHandler.h
+11402;0x2c8a;HEATER_WENT_ON;INFO;No description;mission/tcs/HeaterHandler.h
+11403;0x2c8b;HEATER_WENT_OFF;INFO;No description;mission/tcs/HeaterHandler.h
+11404;0x2c8c;SWITCH_ALREADY_ON;INFO;No description;mission/tcs/HeaterHandler.h
+11405;0x2c8d;SWITCH_ALREADY_OFF;INFO;No description;mission/tcs/HeaterHandler.h
+11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;No description;mission/tcs/HeaterHandler.h
+11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;No description;mission/tcs/HeaterHandler.h
+11500;0x2cec;BURN_PHASE_START;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/SolarArrayDeploymentHandler.h
+11501;0x2ced;BURN_PHASE_DONE;INFO;P1: Burn duration in milliseconds, P2: Dry run flag;mission/SolarArrayDeploymentHandler.h
+11502;0x2cee;MAIN_SWITCH_ON_TIMEOUT;LOW;No description;mission/SolarArrayDeploymentHandler.h
+11503;0x2cef;MAIN_SWITCH_OFF_TIMEOUT;LOW;No description;mission/SolarArrayDeploymentHandler.h
+11504;0x2cf0;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
+11505;0x2cf1;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
+11506;0x2cf2;DEPL_SA1_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
+11507;0x2cf3;DEPL_SA2_GPIO_SWTICH_OFF_FAILED;HIGH;No description;mission/SolarArrayDeploymentHandler.h
+11508;0x2cf4;AUTONOMOUS_DEPLOYMENT_COMPLETED;INFO;No description;mission/SolarArrayDeploymentHandler.h
+11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/payload/PlocMpsocHandler.h
+11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/payload/PlocMpsocHandler.h
+11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/payload/PlocMpsocHandler.h
+11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/payload/PlocMpsocHandler.h
+11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHandler.h
+11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/payload/PlocMpsocHandler.h
+11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
+11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
+11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
+11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
+11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
+11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
+11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/acs/ImtqHandler.h
+11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/acs/ImtqHandler.h
+11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/acs/rwHelpers.h
+11802;0x2e1a;RESET_OCCURED;LOW;No description;mission/acs/rwHelpers.h
+11901;0x2e7d;BOOTING_FIRMWARE_FAILED_EVENT;LOW;Failed to boot firmware;mission/acs/str/StarTrackerHandler.h
+11902;0x2e7e;BOOTING_BOOTLOADER_FAILED_EVENT;LOW;Failed to boot star tracker into bootloader mode;mission/acs/str/StarTrackerHandler.h
+12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/payload/PlocSupervisorHandler.h
+12002;0x2ee2;SUPV_UNKNOWN_TM;LOW;Unhandled event. P1: APID, P2: Service ID;linux/payload/PlocSupervisorHandler.h
+12003;0x2ee3;SUPV_UNINIMPLEMENTED_TM;LOW;No description;linux/payload/PlocSupervisorHandler.h
+12004;0x2ee4;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/payload/PlocSupervisorHandler.h
+12005;0x2ee5;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/payload/PlocSupervisorHandler.h
+12006;0x2ee6;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/payload/PlocSupervisorHandler.h
+12007;0x2ee7;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux/payload/PlocSupervisorHandler.h
+12008;0x2ee8;SUPV_MPSOC_SHUTDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/payload/PlocSupervisorHandler.h
 12100;0x2f44;SANITIZATION_FAILED;LOW;No description;bsp_q7s/fs/SdCardManager.h
 12101;0x2f45;MOUNTED_SD_CARD;INFO;No description;bsp_q7s/fs/SdCardManager.h
-12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
-12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
-12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
-12401;0x3071;INVALID_TC_FRAME;HIGH;No description;linux/ipcore/PdecHandler.h
-12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/ipcore/PdecHandler.h
-12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux/ipcore/PdecHandler.h
-12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux/ipcore/PdecHandler.h
-12405;0x3075;LOST_CARRIER_LOCK_PDEC;INFO;Lost carrier lock;linux/ipcore/PdecHandler.h
-12406;0x3076;LOST_BIT_LOCK_PDEC;INFO;Lost bit lock;linux/ipcore/PdecHandler.h
-12407;0x3077;TOO_MANY_IRQS;MEDIUM;Too many IRQs over the time window of one second. P1: Allowed TCs;linux/ipcore/PdecHandler.h
-12408;0x3078;POLL_SYSCALL_ERROR_PDEC;MEDIUM;No description;linux/ipcore/PdecHandler.h
-12409;0x3079;WRITE_SYSCALL_ERROR_PDEC;HIGH;No description;linux/ipcore/PdecHandler.h
-12410;0x307a;PDEC_RESET_FAILED;HIGH;Failed to pull PDEC reset to low;linux/ipcore/PdecHandler.h
-12411;0x307b;OPEN_IRQ_FILE_FAILED;HIGH;Failed to open the IRQ uio file;linux/ipcore/PdecHandler.h
-12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrHelper.h
-12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrHelper.h
-12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrHelper.h
-12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrHelper.h
-12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrHelper.h
-12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrHelper.h
-12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrHelper.h
-12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrHelper.h
-12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrHelper.h
-12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
-12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
-12511;0x30df;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux/devices/startracker/StrHelper.h
-12512;0x30e0;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrHelper.h
-12513;0x30e1;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrHelper.h
-12514;0x30e2;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrHelper.h
-12515;0x30e3;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/devices/startracker/StrHelper.h
-12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/devices/startracker/StrHelper.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
-12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
-12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
-12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/devices/ploc/PlocMPSoCHelper.h
-12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
-12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/objects/AcsBoardAssembly.h
-12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/objects/AcsBoardAssembly.h
-12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/objects/AcsBoardAssembly.h
-12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/objects/AcsBoardAssembly.h
-12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/objects/SusAssembly.h
-12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/objects/SusAssembly.h
-12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/objects/SusAssembly.h
-12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/objects/SusAssembly.h
-13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;No description;mission/system/objects/TcsBoardAssembly.h
-13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/devices/devicedefinitions/GPSDefinitions.h
-13101;0x332d;CANT_GET_FIX;LOW;Could not get fix in maximum allowed time. P1: Maximum allowed time to get a fix after the GPS was switched on.;mission/devices/devicedefinitions/GPSDefinitions.h
-13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/devices/P60DockHandler.h
-13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/devices/P60DockHandler.h
-13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/devices/P60DockHandler.h
-13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/devices/ploc/PlocSupvUartMan.h
-13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/devices/ploc/PlocSupvUartMan.h
-13602;0x3522;SUPV_CONTINUE_UPDATE_FAILED;LOW;Continue update command failed;linux/devices/ploc/PlocSupvUartMan.h
-13603;0x3523;SUPV_CONTINUE_UPDATE_SUCCESSFUL;LOW;Continue update command successful;linux/devices/ploc/PlocSupvUartMan.h
-13604;0x3524;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/devices/ploc/PlocSupvUartMan.h
-13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/devices/ploc/PlocSupvUartMan.h
-13606;0x3526;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/devices/ploc/PlocSupvUartMan.h
-13607;0x3527;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/devices/ploc/PlocSupvUartMan.h
-13608;0x3528;SUPV_MEM_CHECK_OK;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
-13609;0x3529;SUPV_MEM_CHECK_FAIL;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
-13616;0x3530;SUPV_SENDING_COMMAND_FAILED;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
-13617;0x3531;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
-13618;0x3532;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
-13619;0x3533;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocSupvUartMan.h
-13620;0x3534;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
-13621;0x3535;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
-13622;0x3536;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/devices/ploc/PlocSupvUartMan.h
-13623;0x3537;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
-13624;0x3538;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvUartMan.h
-13625;0x3539;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/devices/ploc/PlocSupvUartMan.h
-13626;0x353a;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/devices/ploc/PlocSupvUartMan.h
-13627;0x353b;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/devices/ploc/PlocSupvUartMan.h
-13628;0x353c;SUPV_REPLY_SIZE_MISSMATCH;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
-13629;0x353d;SUPV_REPLY_CRC_MISSMATCH;LOW;No description;linux/devices/ploc/PlocSupvUartMan.h
-13630;0x353e;SUPV_UPDATE_PROGRESS;INFO;Will be triggered every 5 percent of the update progress. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/devices/ploc/PlocSupvUartMan.h
-13631;0x353f;HDLC_FRAME_REMOVAL_ERROR;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
-13632;0x3540;HDLC_CRC_ERROR;INFO;No description;linux/devices/ploc/PlocSupvUartMan.h
-13700;0x3584;FDIR_REACTION_IGNORED;MEDIUM;No description;mission/devices/devicedefinitions/SyrlinksDefinitions.h
-13701;0x3585;TX_ON;INFO;Transmitter is on now. P1: Submode, P2: Current default datarate.;mission/devices/devicedefinitions/SyrlinksDefinitions.h
-13702;0x3586;TX_OFF;INFO;Transmitter is off now.;mission/devices/devicedefinitions/SyrlinksDefinitions.h
-13800;0x35e8;MISSING_PACKET;LOW;No description;mission/devices/devicedefinitions/ScexDefinitions.h
-13801;0x35e9;EXPERIMENT_TIMEDOUT;LOW;No description;mission/devices/devicedefinitions/ScexDefinitions.h
-13802;0x35ea;MULTI_PACKET_COMMAND_DONE;INFO;No description;mission/devices/devicedefinitions/ScexDefinitions.h
+12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/payload/PlocMemoryDumper.h
+12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/payload/PlocMemoryDumper.h
+12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/payload/PlocMemoryDumper.h
+12401;0x3071;INVALID_TC_FRAME;HIGH;No description;linux/ipcore/pdec.h
+12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/ipcore/pdec.h
+12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux/ipcore/pdec.h
+12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux/ipcore/pdec.h
+12405;0x3075;LOST_CARRIER_LOCK_PDEC;INFO;Lost carrier lock;linux/ipcore/pdec.h
+12406;0x3076;LOST_BIT_LOCK_PDEC;INFO;Lost bit lock;linux/ipcore/pdec.h
+12407;0x3077;TOO_MANY_IRQS;MEDIUM;Too many IRQs over the time window of one second. P1: Allowed TCs;linux/ipcore/pdec.h
+12408;0x3078;POLL_SYSCALL_ERROR_PDEC;MEDIUM;No description;linux/ipcore/pdec.h
+12409;0x3079;WRITE_SYSCALL_ERROR_PDEC;HIGH;No description;linux/ipcore/pdec.h
+12410;0x307a;PDEC_TRYING_RESET_WITH_INIT;LOW;Trying a PDEC reset with complete re-initialization;linux/ipcore/pdec.h
+12411;0x307b;PDEC_TRYING_RESET_NO_INIT;LOW;Trying a PDEC reset without re-initialization.;linux/ipcore/pdec.h
+12412;0x307c;PDEC_RESET_FAILED;HIGH;Failed to pull PDEC reset to low;linux/ipcore/pdec.h
+12413;0x307d;OPEN_IRQ_FILE_FAILED;HIGH;Failed to open the IRQ uio file;linux/ipcore/pdec.h
+12414;0x307e;PDEC_INIT_FAILED;HIGH;PDEC initialization failed. This might also be due to the persistent confiuration never becoming available, for example due to SD card issues.;linux/ipcore/pdec.h
+12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/acs/StrComHandler.h
+12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/acs/StrComHandler.h
+12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/acs/StrComHandler.h
+12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/acs/StrComHandler.h
+12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/acs/StrComHandler.h
+12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/acs/StrComHandler.h
+12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/acs/StrComHandler.h
+12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/acs/StrComHandler.h
+12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/acs/StrComHandler.h
+12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/acs/StrComHandler.h
+12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/acs/StrComHandler.h
+12511;0x30df;STR_COM_REPLY_TIMEOUT;LOW;Star tracker did not send a valid reply for a certain timeout. P1: Position of upload or download packet for which the packet wa sent. P2: Timeout;linux/acs/StrComHandler.h
+12513;0x30e1;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/acs/StrComHandler.h
+12514;0x30e2;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/acs/StrComHandler.h
+12515;0x30e3;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/acs/StrComHandler.h
+12516;0x30e4;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/acs/StrComHandler.h
+12517;0x30e5;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/acs/StrComHandler.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/payload/PlocMpsocHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/payload/PlocMpsocHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocMpsocHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHelper.h
+12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/payload/PlocMpsocHelper.h
+12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/payload/PlocMpsocHelper.h
+12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/payload/PayloadPcduHandler.h
+12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
+12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/acs/AcsBoardAssembly.h
+12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/AcsBoardAssembly.h
+12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/AcsBoardAssembly.h
+12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/acs/AcsBoardAssembly.h
+12804;0x3204;DIRECT_TRANSITION_TO_DUAL_OTHER_GPS_FAULTY;MEDIUM;This is triggered when the assembly would have normally switched the board side, but the GPS device of the other side was marked faulty. P1: Current submode.;mission/system/acs/AcsBoardAssembly.h
+12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;No description;mission/system/acs/SusAssembly.h
+12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;No description;mission/system/acs/SusAssembly.h
+12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;No description;mission/system/acs/SusAssembly.h
+12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/acs/SusAssembly.h
+13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;No description;mission/system/tcs/TcsBoardAssembly.h
+13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/acs/archive/GPSDefinitions.h
+13101;0x332d;CANT_GET_FIX;LOW;Could not get fix in maximum allowed time. P1: Maximum allowed time to get a fix after the GPS was switched on.;mission/acs/archive/GPSDefinitions.h
+13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/power/P60DockHandler.h
+13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/power/P60DockHandler.h
+13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/power/P60DockHandler.h
+13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/payload/PlocSupvUartMan.h
+13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/payload/PlocSupvUartMan.h
+13602;0x3522;SUPV_CONTINUE_UPDATE_FAILED;LOW;Continue update command failed;linux/payload/PlocSupvUartMan.h
+13603;0x3523;SUPV_CONTINUE_UPDATE_SUCCESSFUL;LOW;Continue update command successful;linux/payload/PlocSupvUartMan.h
+13604;0x3524;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/payload/PlocSupvUartMan.h
+13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/payload/PlocSupvUartMan.h
+13606;0x3526;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/payload/PlocSupvUartMan.h
+13607;0x3527;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/payload/PlocSupvUartMan.h
+13608;0x3528;SUPV_MEM_CHECK_OK;INFO;No description;linux/payload/PlocSupvUartMan.h
+13609;0x3529;SUPV_MEM_CHECK_FAIL;INFO;No description;linux/payload/PlocSupvUartMan.h
+13616;0x3530;SUPV_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocSupvUartMan.h
+13617;0x3531;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
+13618;0x3532;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
+13619;0x3533;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocSupvUartMan.h
+13620;0x3534;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
+13621;0x3535;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
+13622;0x3536;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/payload/PlocSupvUartMan.h
+13623;0x3537;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
+13624;0x3538;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/payload/PlocSupvUartMan.h
+13625;0x3539;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/payload/PlocSupvUartMan.h
+13626;0x353a;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/payload/PlocSupvUartMan.h
+13627;0x353b;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/payload/PlocSupvUartMan.h
+13628;0x353c;SUPV_REPLY_SIZE_MISSMATCH;LOW;No description;linux/payload/PlocSupvUartMan.h
+13629;0x353d;SUPV_REPLY_CRC_MISSMATCH;LOW;No description;linux/payload/PlocSupvUartMan.h
+13630;0x353e;SUPV_UPDATE_PROGRESS;INFO;Will be triggered every 5 percent of the update progress. P1: First byte percent, third and fourth byte Sequence Count, P2: Bytes written;linux/payload/PlocSupvUartMan.h
+13631;0x353f;HDLC_FRAME_REMOVAL_ERROR;INFO;No description;linux/payload/PlocSupvUartMan.h
+13632;0x3540;HDLC_CRC_ERROR;INFO;No description;linux/payload/PlocSupvUartMan.h
+13701;0x3585;TX_ON;INFO;Transmitter is on now. P1: Submode, P2: Current default datarate.;mission/com/syrlinksDefs.h
+13702;0x3586;TX_OFF;INFO;Transmitter is off now.;mission/com/syrlinksDefs.h
+13800;0x35e8;MISSING_PACKET;LOW;No description;mission/payload/scexHelpers.h
+13801;0x35e9;EXPERIMENT_TIMEDOUT;LOW;No description;mission/payload/scexHelpers.h
+13802;0x35ea;MULTI_PACKET_COMMAND_DONE;INFO;No description;mission/payload/scexHelpers.h
 13901;0x364d;SET_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13902;0x364e;GET_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13903;0x364f;INSERT_CONFIGFILEVALUE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13904;0x3650;WRITE_CONFIGFILE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
 13905;0x3651;READ_CONFIGFILE_FAILED;MEDIUM;No description;mission/utility/GlobalConfigHandler.h
-14000;0x36b0;ALLOC_FAILURE;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14001;0x36b1;REBOOT_SW;LOW; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
-14002;0x36b2;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
-14003;0x36b3;REBOOT_HW;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14004;0x36b4;NO_SD_CARD_ACTIVE;HIGH;No SD card was active. Core controller will attempt to re-initialize a SD card.;bsp_q7s/core/CoreController.h
-14005;0x36b5;VERSION_INFO;INFO;P1: Byte 0: Major, Byte 1: Minor, Byte 2: Patch, Byte 3: Has Git Hash P2: First four letters of Git SHA is the last byte of P1 is set.;bsp_q7s/core/CoreController.h
-14006;0x36b6;CURRENT_IMAGE_INFO;INFO;P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
-14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;bsp_q7s/core/CoreController.h
-14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;bsp_q7s/core/CoreController.h
-14010;0x36ba;I2C_UNAVAILABLE_REBOOT;MEDIUM;No description;bsp_q7s/core/CoreController.h
-14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/ThermalController.h
-14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/ThermalController.h
-14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14103;0x3717;PLOC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14105;0x3719;HPA_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14106;0x371a;PLPCDU_OVERHEATING;HIGH;No description;mission/controller/ThermalController.h
-14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/objects/ComSubsystem.h
-14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/objects/ComSubsystem.h
+14000;0x36b0;ALLOC_FAILURE;MEDIUM;No description;mission/sysDefs.h
+14001;0x36b1;REBOOT_SW;LOW; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;mission/sysDefs.h
+14002;0x36b2;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;mission/sysDefs.h
+14003;0x36b3;REBOOT_HW;MEDIUM;No description;mission/sysDefs.h
+14004;0x36b4;NO_SD_CARD_ACTIVE;HIGH;No SD card was active. Core controller will attempt to re-initialize a SD card.;mission/sysDefs.h
+14005;0x36b5;VERSION_INFO;INFO;P1: Byte 0: Major, Byte 1: Minor, Byte 2: Patch, Byte 3: Has Git Hash P2: First four letters of Git SHA is the last byte of P1 is set.;mission/sysDefs.h
+14006;0x36b6;CURRENT_IMAGE_INFO;INFO;P1: Current Chip, P2: Current Copy;mission/sysDefs.h
+14007;0x36b7;REBOOT_COUNTER;INFO;Total reboot counter, which is the sum of the boot count of all individual images.;mission/sysDefs.h
+14008;0x36b8;INDIVIDUAL_BOOT_COUNTS;INFO;Get the boot count of the individual images. P1: First 16 bits boot count of image 0 0, last 16 bits boot count of image 0 1. P2: First 16 bits boot count of image 1 0, last 16 bits boot count of image 1 1.;mission/sysDefs.h
+14010;0x36ba;TRYING_I2C_RECOVERY;HIGH;I2C is unavailable. Trying recovery of I2C bus by power cycling all I2C devices.;mission/sysDefs.h
+14011;0x36bb;I2C_REBOOT;HIGH;I2C is unavailable. Recovery did not work, performing full reboot.;mission/sysDefs.h
+14012;0x36bc;PDEC_REBOOT;HIGH;PDEC recovery through reset was not possible, performing full reboot.;mission/sysDefs.h
+14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/tcsDefs.h
+14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/tcsDefs.h
+14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14104;0x3718;OBC_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14105;0x3719;CAMERA_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14106;0x371a;PCDU_SYSTEM_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
+14107;0x371b;HEATER_NOT_OFF_FOR_OFF_MODE;MEDIUM;No description;mission/controller/tcsDefs.h
+14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/com/ComSubsystem.h
+14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/com/ComSubsystem.h
 14300;0x37dc;POSSIBLE_FILE_CORRUPTION;LOW;P1: Result code of TM packet parser. P2: Timestamp of possibly corrupt file as a unix timestamp.;mission/persistentTmStoreDefs.h
 14301;0x37dd;FILE_TOO_LARGE;LOW;File in store too large. P1: Detected file size P2: Allowed file size;mission/persistentTmStoreDefs.h
 14302;0x37de;BUSY_DUMPING_EVENT;INFO;No description;mission/persistentTmStoreDefs.h
-14303;0x37df;DUMP_WAS_CANCELLED;LOW;Dump was cancelled. P1: Object ID of store.;mission/persistentTmStoreDefs.h
 14305;0x37e1;DUMP_OK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14306;0x37e2;DUMP_NOK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14307;0x37e3;DUMP_MISC_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14308;0x37e4;DUMP_HK_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
 14309;0x37e5;DUMP_CFDP_STORE_DONE;INFO;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14310;0x37e6;DUMP_OK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14311;0x37e7;DUMP_NOK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14312;0x37e8;DUMP_MISC_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14313;0x37e9;DUMP_HK_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h
+14314;0x37ea;DUMP_CFDP_CANCELLED;LOW;P1: Number of dumped packets. P2: Total dumped bytes.;mission/persistentTmStoreDefs.h

eive_tmtc/config/object_ids.py

@@ -49,6 +49,9 @@ GYRO_1_L3G_HANDLER_ID = bytes([0x44, 0x12, 0x01, 0x11])
 GYRO_2_ADIS_HANDLER_ID = bytes([0x44, 0x12, 0x02, 0x12])
 GYRO_3_L3G_HANDLER_ID = bytes([0x44, 0x12, 0x03, 0x13])
 GPS_CONTROLLER = bytes([0x44, 0x13, 0x00, 0x45])
+GPS_0_HEALTH_DEV = bytes([0x44, 0x13, 0x00, 0x46])
+GPS_1_HEALTH_DEV = bytes([0x44, 0x13, 0x00, 0x47])
+
 RW1_ID = bytes([0x44, 0x12, 0x00, 0x47])
 RW2_ID = bytes([0x44, 0x12, 0x01, 0x48])
 RW3_ID = bytes([0x44, 0x12, 0x02, 0x49])

eive_tmtc/config/objects.csv

@@ -29,6 +29,8 @@
 0x44120350;RW4
 0x44130001;STAR_TRACKER
 0x44130045;GPS_CONTROLLER
+0x44130046;GPS_0_HEALTH_DEV
+0x44130047;GPS_1_HEALTH_DEV
 0x44140013;IMTQ_POLLING
 0x44140014;IMTQ_HANDLER
 0x442000A1;PCDU_HANDLER
@@ -41,7 +43,7 @@
 0x443200A5;RAD_SENSOR
 0x44330000;PLOC_UPDATER
 0x44330001;PLOC_MEMORY_DUMPER
-0x44330002;STR_HELPER
+0x44330002;STR_COM_IF
 0x44330003;PLOC_MPSOC_HELPER
 0x44330004;AXI_PTME_CONFIG
 0x44330005;PTME_CONFIG
@@ -77,6 +79,7 @@
 0x44420030;RTD_14_IC17_TCS_BOARD
 0x44420031;RTD_15_IC18_IMTQ
 0x445300A3;SYRLINKS_HANDLER
+0x445300A4;SYRLINKS_COM_HANDLER
 0x49000000;ARDUINO_COM_IF
 0x49010005;GPIO_IF
 0x49010006;SCEX_UART_READER
@@ -168,6 +171,5 @@
 0x73040002;HK_STORE_AND_TM_TASK
 0x73040003;CFDP_STORE_AND_TM_TASK
 0x73040004;DOWNLINK_RAM_STORE
-0x73500000;CCSDS_IP_CORE_BRIDGE
 0x90000003;THERMAL_TEMP_INSERTER
 0xFFFFFFFF;NO_OBJECT

eive_tmtc/config/subsystems.csv

@@ -59,3 +59,4 @@
 141;TCS_CONTROLLER
 142;COM_SUBSYSTEM
 143;PERSISTENT_TM_STORE
+144;SYRLINKS_COM

eive_tmtc/tmtc/acs/acs_ctrl.py

@@ -989,6 +989,7 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
         2: "NO_MODEL_VECTORS",
         3: "NO_SUS_MGM_STR_DATA",
         4: "COVARIANCE_INVERSION_FAILED",
+        5: "NOT_FINITE",
         10: "INITIALIZED",
         11: "RUNNING",
     }
@@ -1016,24 +1017,44 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
     current_idx += inc_len_vec
     status = struct.unpack(fmt_sts, hk_data[current_idx : current_idx + inc_len_sts])[0]
     current_idx += inc_len_sts
-    pw.dlog(f"{'MEKF Status'.ljust(25)}: {mekf_status[status]}")
+    if mekf_status.get(status) is not None:
+        pw.dlog(f"{'MEKF Status'.ljust(25)}: {mekf_status[status]}")
+    else:
+        pw.dlog(f"{'MEKF Raw Status (key unknown)'.ljust(25)}: {status}")
     pw.dlog(f"{'MEKF Quaternion'.ljust(25)}: {fmt_str_4.format(*quat)}")
     pw.dlog(f"{'MEKF Rotational Rate'.ljust(25)}: {fmt_str_3.format(*rates)}")
     pw.printer.print_validity_buffer(hk_data[current_idx:], num_vars=3)
 
 
 def handle_ctrl_val_data(pw: PrintWrapper, hk_data: bytes):
+    safe_strat = {
+        0: "OFF",
+        1: "NO_MAG_FIELD_FOR_CONTROL",
+        2: "NO_SENSORS_FOR_CONTROL",
+        10: "ACTIVE_MEKF",
+        11: "WITHOUT_MEKF",
+        12: "ECLIPSE_DAMPING",
+        13: "ECLIPSE_IDELING",
+        20: "DETUMBLE_FULL",
+        21: "DETUMBLE_DETERIORATED",
+    }
     pw.dlog("Received CTRL Values Set")
+    fmt_strat = "!B"
     fmt_quat = "!dddd"
     fmt_scalar = "!d"
     fmt_vec = "!ddd"
+    inc_len_strat = struct.calcsize(fmt_strat)
     inc_len_quat = struct.calcsize(fmt_quat)
     inc_len_scalar = struct.calcsize(fmt_scalar)
     inc_len_vec = struct.calcsize(fmt_vec)
-    if len(hk_data) < 2 * inc_len_quat + inc_len_scalar + inc_len_vec:
+    if len(hk_data) < inc_len_strat + 2 * inc_len_quat + inc_len_scalar + inc_len_vec:
         pw.dlog("Received HK set too small")
         return
     current_idx = 0
+    strat = struct.unpack(
+        fmt_strat, hk_data[current_idx : current_idx + inc_len_strat]
+    )[0]
+    current_idx += inc_len_strat
     tgt_quat = [
         f"{val:8.3f}"
         for val in struct.unpack(
@@ -1062,11 +1083,15 @@ def handle_ctrl_val_data(pw: PrintWrapper, hk_data: bytes):
         )
     ]
     current_idx += inc_len_vec
+    if safe_strat.get(strat) is not None:
+        pw.dlog(f"{'Safe Ctrl Strategy'.ljust(25)}: {safe_strat[strat]}")
+    else:
+        pw.dlog(f"{'Safe Ctrl Strategy (key unknown)'.ljust(25)}: {strat}")
     pw.dlog(f"Control Values Target Quaternion: {tgt_quat}")
     pw.dlog(f"Control Values Error Quaternion: {err_quat}")
     pw.dlog(f"Control Values Error Angle: {err_ang} [deg]")
     pw.dlog(f"Control Values Target Rotational Rate: {tgt_rot} [deg/s]")
-    pw.printer.print_validity_buffer(hk_data[current_idx:], num_vars=4)
+    pw.printer.print_validity_buffer(hk_data[current_idx:], num_vars=5)
 
 
 def handle_act_cmd_data(pw: PrintWrapper, hk_data: bytes):

eive_tmtc/tmtc/acs/gps.py

@@ -1,4 +1,5 @@
 import datetime
+import enum
 import logging
 import struct
 
@@ -6,6 +7,7 @@ from eive_tmtc.config.definitions import CustomServiceList
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from tmtccmd.config import TmtcDefinitionWrapper, OpCodeEntry
 from tmtccmd.config.tmtc import tmtc_definitions_provider
+from tmtccmd.tc.pus_200_fsfw_mode import create_mode_command, Mode
 from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.tc.pus_3_fsfw_hk import (
     make_sid,
@@ -19,6 +21,8 @@ _LOGGER = logging.getLogger(__name__)
 
 
 class OpCode:
+    OFF = "off"
+    ON = "on"
     REQ_OS_HK = ["hk"]
     ENABLE_HK = ["enable_hk"]
     DISABLE_HK = ["disable_hk"]
@@ -26,13 +30,15 @@ class OpCode:
 
 
 class Info:
+    OFF = "Off"
+    ON = "On"
     REQ_OS_HK = "Request One-Shot HK"
     ENABLE_HK = "Enable HK"
     DISABLE_HK = "Disable HK"
     RESET_GNSS = "Reset GNSS using reset pin"
 
 
-class SetId:
+class SetId(enum.IntEnum):
     HK = 0
 
 
@@ -43,6 +49,8 @@ def add_gps_cmds(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK)
     oce.add(keys=OpCode.ENABLE_HK, info=Info.ENABLE_HK)
     oce.add(keys=OpCode.DISABLE_HK, info=Info.DISABLE_HK)
+    oce.add(keys=OpCode.OFF, info=Info.OFF)
+    oce.add(keys=OpCode.ON, info=Info.ON)
     defs.add_service(
         name=CustomServiceList.GPS_CTRL.value,
         info="GPS/GNSS Controller",
@@ -71,6 +79,12 @@ def pack_gps_command(object_id: bytes, q: DefaultPusQueueHelper, op_code: str):
     if op_code in OpCode.REQ_OS_HK:
         q.add_log_cmd(f"GPS: {Info.REQ_OS_HK}")
         q.add_pus_tc(create_request_one_hk_command(sid=sid))
+    if op_code in OpCode.ON:
+        q.add_log_cmd(f"GPS: {Info.ON}")
+        q.add_pus_tc(create_mode_command(object_id, Mode.ON, 0))
+    if op_code in OpCode.OFF:
+        q.add_log_cmd(f"GPS: {Info.OFF}")
+        q.add_pus_tc(create_mode_command(object_id, Mode.OFF, 0))
 
 
 def handle_gps_data(printer: FsfwTmTcPrinter, hk_data: bytes):

eive_tmtc/tmtc/acs/reaction_wheels.py

@@ -20,6 +20,7 @@ from tmtccmd.tc.pus_3_fsfw_hk import (
     enable_periodic_hk_command_with_interval,
     disable_periodic_hk_command,
 )
+from tmtccmd.tc.pus_8_fsfw_funccmd import create_action_cmd
 from spacepackets.ecss.tc import PusTelecommand
 from tmtccmd.tc.pus_200_fsfw_mode import pack_mode_data, Mode, Subservice
 from eive_tmtc.config.definitions import CustomServiceList
@@ -28,14 +29,15 @@ from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
 
 class OpCodesDev:
-    SPEED = ["0", "speed"]
-    ON = ["1", "on"]
-    NML = ["2", "nml"]
-    OFF = ["3", "off"]
-    GET_STATUS = ["4", "status"]
-    GET_TM = ["5", "tm"]
-    ENABLE_STATUS_HK = ["6", "enable_status_hk"]
-    DISABLE_STATUS_HK = ["7", "disable_status_hk"]
+    SPEED = "speed"
+    ON = "on"
+    NML = "nml"
+    OFF = "off"
+    GET_STATUS = "status"
+    GET_TM = "get_tm_set"
+    REQ_TM = "req_tm_set"
+    ENABLE_STATUS_HK = "enable_status_hk"
+    DISABLE_STATUS_HK = "disable_status_hk"
 
 
 class InfoDev:
@@ -45,6 +47,7 @@ class InfoDev:
     OFF = "Set Off"
     GET_STATUS = "Get Status HK"
     GET_TM = "Get TM HK"
+    REQ_TM = "Request TM HK"
     ENABLE_STATUS_HK = "Enable Status HK"
     DISABLE_STATUS_HK = "Disable Status HK"
 
@@ -57,6 +60,10 @@ class OpCodesAss:
     ALL_SPEED_OFF = ["4", "speed_off"]
 
 
+class ActionId:
+    REQUEST_TM = 9
+
+
 class InfoAss:
     ON = "Mode On: 3/4 RWs min. on"
     NML = "Mode Normal: 3/4 RWs min. normal"
@@ -99,6 +106,7 @@ def add_rw_cmds(defs: TmtcDefinitionWrapper):
     oce.add(info=InfoDev.ON, keys=OpCodesDev.ON)
     oce.add(info=InfoDev.OFF, keys=OpCodesDev.OFF)
     oce.add(info=InfoDev.NML, keys=OpCodesDev.NML)
+    oce.add(info=InfoDev.REQ_TM, keys=OpCodesDev.REQ_TM)
     oce.add(info=InfoDev.GET_STATUS, keys=OpCodesDev.GET_STATUS)
     oce.add(info=InfoDev.GET_TM, keys=OpCodesDev.GET_TM)
     oce.add(info=InfoDev.ENABLE_STATUS_HK, keys=OpCodesDev.ENABLE_STATUS_HK)
@@ -139,7 +147,7 @@ def add_rw_cmds(defs: TmtcDefinitionWrapper):
 def pack_single_rw_test_into(
     object_id: bytes, rw_idx: int, q: DefaultPusQueueHelper, op_code: str
 ):
-    if op_code in OpCodesDev.SPEED:
+    if op_code == OpCodesDev.SPEED:
         speed, ramp_time = prompt_speed_ramp_time()
         q.add_log_cmd(
             f"RW {rw_idx}: {InfoDev.SPEED} with target "
@@ -147,28 +155,33 @@ def pack_single_rw_test_into(
         )
         q.add_pus_tc(pack_set_speed_command(object_id, speed, ramp_time))
 
-    if op_code in OpCodesDev.ON:
+    if op_code == OpCodesDev.ON:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.ON}")
         mode_data = pack_mode_data(object_id, Mode.ON, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDev.NML:
+    if op_code == OpCodesDev.NML:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.NML}")
         mode_data = pack_mode_data(object_id, Mode.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDev.OFF:
+    if op_code == OpCodesDev.OFF:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.OFF}")
         mode_data = pack_mode_data(object_id, Mode.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDev.GET_TM:
+    if op_code == OpCodesDev.GET_TM:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.GET_TM}")
         q.add_pus_tc(
             generate_one_hk_command(
                 sid=make_sid(object_id=object_id, set_id=RwSetId.TM_SET)
             )
         )
+    if op_code == OpCodesDev.REQ_TM:
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.REQ_TM}")
+        q.add_pus_tc(
+            create_action_cmd(object_id=object_id, action_id=ActionId.REQUEST_TM)
+        )
     if op_code in OpCodesDev.GET_STATUS:
         q.add_log_cmd(f"RW {rw_idx}: {InfoDev.GET_STATUS}")
         q.add_pus_tc(

eive_tmtc/tmtc/acs/star_tracker.py

@@ -21,6 +21,7 @@ from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.tc.pus_200_fsfw_mode import pack_mode_data, Mode
 from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
+from eive_tmtc.config.object_ids import STR_ASSEMBLY, STAR_TRACKER_ID
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -97,12 +98,21 @@ class OpCodes:
     NORMAL = "nml"
     OFF = "off"
     PING = "ping"
-    REQUEST_SOLUTION_SET = "request_sol_set"
+    REQUEST_SOLUTION_SET_HK = "hk_req_sol"
+    REQUEST_SOLUTION_SET_ACTION = "action_req_sol"
     TAKE_IMAGE = "take_image"
+    UPLOAD_IMAGE = "upload_image"
+    SET_IMG_PROCESSOR_MODE = "set_img_proc_mode"
+    FW_UPDATE = "fw_update"
 
 
 class Info:
-    REQUEST_SOLUTION_SET = "Request Solution Set HK once"
+    REQUEST_SOLUTION_SET_HK = "Request Solution Set HK once"
+    REQUEST_SOLUTION_SET_ACTION = "Request Solution Set Action"
+    UPLOAD_IMAGE = "Upload Image"
+    TAKE_IMAGE = "Take Image"
+    SET_IMG_PROCESSOR_MODE = "Set Image Processor Mode"
+    FW_UPDATE = "Firmware Update"
 
 
 class SetId(enum.IntEnum):
@@ -128,39 +138,42 @@ class FileDefs:
     egse_histogram_upload_img_config = (
         "/home/pi/arcsec/json/upload-image-histogram.json"
     )
-    q7s_ground_config = "/mnt/sd0/startracker/json/ground-config.json"
+    q7s_ground_config = "/mnt/sd0/startracker/ground-config.json"
     q7s_flight_config = "/mnt/sd0/startracker/flight-config.json"
     firmware2_1 = "/home/pi/arcsec/firmware/sagitta-2-1.bin"
     firmware22_1 = "/home/pi/arcsec/firmware/sagitta-22-1.bin"
     firmware_origin = "/home/pi/arcsec/firmware/sagitta-origin.bin"
+    FW_SLOT_Q7S = "/mnt/sd0/startracker/updates/sagitta-update.bin"
 
 
 json_dict = {
-    "1": ["Q7S flight config", FileDefs.q7s_flight_config],
-    "2": ["Q7S ground config", FileDefs.q7s_ground_config],
-    "3": ["EGSE flight config", FileDefs.egse_flight_config],
-    "4": ["EGSE ground config", FileDefs.egse_ground_config],
-    "5": [
+    "1": ("Q7S flight config", FileDefs.q7s_flight_config),
+    "2": ("Q7S ground config", FileDefs.q7s_ground_config),
+    "3": ("EGSE flight config", FileDefs.egse_flight_config),
+    "4": ("EGSE ground config", FileDefs.egse_ground_config),
+    "5": (
         "EGSE get solution, upload image config",
         FileDefs.egse_solution_upload_img_config,
-    ],
-    "6": [
+    ),
+    "6": (
         "EGSE get histogram, upload image config",
         FileDefs.egse_solution_upload_img_config,
-    ],
+    ),
 }
 
-firmware_dict = {
-    "1": ["Firmware Major = 2, Minor = 1", FileDefs.firmware2_1],
-    "2": ["Firmware Major = 22, Minor = 1", FileDefs.firmware22_1],
-    "3": ["Firmware Origin", FileDefs.firmware_origin],
+FW_DICT = {
+    "0": ("Firmware Update Q7S", FileDefs.FW_SLOT_Q7S),
+    "1": ("Firmware Major = 2, Minor = 1", FileDefs.firmware2_1),
+    "2": ("Firmware Major = 22, Minor = 1", FileDefs.firmware22_1),
+    "3": ("Firmware Origin", FileDefs.firmware_origin),
 }
 
-upload_image_dict = {
-    "1": ["q7s gemma", "/mnt/sd0/startracker/gemma.bin"],
-    "2": ["egse gemma", "/home/pi/arcsec/star-images/gemma.bin"],
-    "3": ["q7s polaris", "/mnt/sd0/startracker/polaris.bin"],
-    "4": ["egse polaris", "/home/pi/arcsec/star-images/polaris.bin"],
+UPLOAD_IMAGE_DICT = {
+    "0": ("custom path", "Custom Path"),
+    "1": ("q7s gemma", "/mnt/sd0/startracker/gemma.bin"),
+    "2": ("egse gemma", "/home/pi/arcsec/star-images/gemma.bin"),
+    "3": ("q7s polaris", "/mnt/sd0/startracker/polaris.bin"),
+    "4": ("egse polaris", "/home/pi/arcsec/star-images/polaris.bin"),
 }
 
 
@@ -175,11 +188,20 @@ class PartitionSize:
     STAR_TRACKER_FIRMWARE = 464572
 
 
-class Submode:
+class Submode(enum.IntEnum):
+    DEFAULT = 0
     BOOTLOADER = 1
     FIRMWARE = 2
 
 
+def prompt_object_id_mode_cmd() -> bytes:
+    cmd_assy = input("Command Assembly (0) or Device Handler (1) ?: ")
+    if cmd_assy == "0":
+        return STR_ASSEMBLY
+    else:
+        return STAR_TRACKER_ID
+
+
 def pack_star_tracker_commands(
     object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_code: str
 ):
@@ -189,23 +211,27 @@ def pack_star_tracker_commands(
     obyt = object_id.as_bytes
     if op_code == OpCodes.ON_BOOTLOADER:
         q.add_log_cmd("Star tracker: Mode On, Submode Bootloader")
-        data = pack_mode_data(obyt, Mode.ON, Submode.BOOTLOADER)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.ON, Submode.BOOTLOADER)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
     if op_code == OpCodes.ON_FIRMWARE:
         q.add_log_cmd("Star tracker: Mode On, Submode Firmware")
-        data = pack_mode_data(obyt, Mode.ON, Submode.FIRMWARE)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.ON, Submode.FIRMWARE)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
     if op_code == OpCodes.NORMAL:
         q.add_log_cmd("Star tracker: Mode Normal")
-        data = pack_mode_data(obyt, Mode.NORMAL, 0)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
     if op_code == OpCodes.OFF:
         q.add_log_cmd("Star tracker: Mode Off")
-        data = pack_mode_data(obyt, Mode.OFF, 0)
+        data = pack_mode_data(prompt_object_id_mode_cmd(), Mode.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.REQUEST_SOLUTION_SET:
-        q.add_log_cmd(Info.REQUEST_SOLUTION_SET)
+    if op_code == OpCodes.REQUEST_SOLUTION_SET_HK:
+        q.add_log_cmd(Info.REQUEST_SOLUTION_SET_HK)
         q.add_pus_tc(create_request_one_diag_command(make_sid(obyt, SetId.SOLUTION)))
+    if op_code == OpCodes.REQUEST_SOLUTION_SET_ACTION:
+        q.add_log_cmd("Star tracker: Request solution")
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_SOLUTION)
+        q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "4":
         q.add_log_cmd("Star tracker: Mode Raw")
         data = pack_mode_data(obyt, Mode.RAW, 0)
@@ -253,11 +279,7 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: Request time")
         data = obyt + struct.pack("!I", StarTrackerActionId.REQ_TIME)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == "14":
-        q.add_log_cmd("Star tracker: Request solution")
-        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_SOLUTION)
-        q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == "15":
+    if op_code == OpCodes.UPLOAD_IMAGE:
         q.add_log_cmd("Star tracker: Upload image")
         image = get_upload_image()
         data = (
@@ -360,7 +382,9 @@ def pack_star_tracker_commands(
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == OpCodes.TAKE_IMAGE:
         q.add_log_cmd("Star tracker: Take image")
-        actionid = int(input("Specify parameter ID (take image - 4): "))
+        actionid = int(
+            input("Specify parameter ID (4: take image, 7: get histogram): ")
+        )
         data = (
             obyt
             + struct.pack("!I", StarTrackerActionId.TAKE_IMAGE)
@@ -510,8 +534,8 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: Request limits")
         data = obyt + struct.pack("!I", StarTrackerActionId.REQ_LIMITS)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == "51":
-        q.add_log_cmd("Star tracker: Set image processor parameters")
+    if op_code == OpCodes.SET_IMG_PROCESSOR_MODE:
+        q.add_log_cmd(Info.SET_IMG_PROCESSOR_MODE)
         json_file = get_config_file()
         data = (
             obyt
@@ -611,13 +635,13 @@ def pack_star_tracker_commands(
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == "69":
-        q.add_log_cmd("Star tracker: Firmware update")
+    if op_code == OpCodes.FW_UPDATE:
+        q.add_log_cmd(Info.FW_UPDATE)
         firmware = get_firmware()
         data = (
             obyt
             + struct.pack("!I", StarTrackerActionId.FIRMWARE_UPDATE)
-            + bytearray(firmware, "utf-8")
+            + firmware.encode()
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
 
@@ -662,17 +686,24 @@ def get_config_file() -> str:
 
 def get_firmware() -> str:
     _LOGGER.info("Specify firmware file")
-    input_helper = InputHelper(firmware_dict)
-    key = input_helper.get_key()
-    firmware = firmware_dict[key][1]
+    bin_select = int(input("Use hardcoded paths (0) or specify path manually (1) ?: "))
+    if bin_select == 0:
+        input_helper = InputHelper(FW_DICT)
+        key = input_helper.get_key()
+        firmware = FW_DICT[key][1]
+    else:
+        firmware = input("Specify absolute path of the firmware update file: ")
     return firmware
 
 
 def get_upload_image() -> str:
     _LOGGER.info("Specify image to upload")
-    input_helper = InputHelper(upload_image_dict)
+    input_helper = InputHelper(UPLOAD_IMAGE_DICT)
     key = input_helper.get_key()
-    image = upload_image_dict[key][1]
+    if UPLOAD_IMAGE_DICT[key][0] == "custom path":
+        image = input("Please specify custom absolute path: ")
+    else:
+        image = UPLOAD_IMAGE_DICT[key][1]
     return image
 
 
@@ -778,8 +809,11 @@ def handle_solution_set(hk_data: bytes, pw: PrintWrapper):
     )
     pw.dlog(f"Number of close stars in LISA solution: {lisa_number_close_stars}")
     current_idx += fmt_len
-    is_trusworthy = hk_data[current_idx]
-    pw.dlog(f"Trustworthy solution: {is_trusworthy}")
+    str_mode = hk_data[current_idx]
+    pw.dlog(f"STR mode: {str_mode}")
+    current_idx += 1
+    is_trustworthy = hk_data[current_idx]
+    pw.dlog(f"Trustworthy solution: {is_trustworthy}")
     current_idx += 1
     stable_count = struct.unpack("!I", hk_data[current_idx : current_idx + 4])[0]
     pw.dlog(f"Stable count: {stable_count}")
@@ -797,10 +831,13 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce.add(OpCodes.ON_FIRMWARE, "Mode On, Submode Firmware")
     oce.add(OpCodes.NORMAL, "Mode Normal")
     oce.add(OpCodes.OFF, "Mode Off")
-    oce.add("4", "Star Tracker: Mode Raw")
+    # oce.add("4", "Star Tracker: Mode Raw")
     oce.add(OpCodes.PING, "Star Tracker: Ping")
     oce.add(OpCodes.TAKE_IMAGE, "Take Image")
-    oce.add(OpCodes.REQUEST_SOLUTION_SET, "Request Solution Set HK")
+    oce.add(OpCodes.REQUEST_SOLUTION_SET_HK, Info.REQUEST_SOLUTION_SET_HK)
+    oce.add(OpCodes.REQUEST_SOLUTION_SET_ACTION, Info.REQUEST_SOLUTION_SET_ACTION)
+    oce.add(OpCodes.UPLOAD_IMAGE, Info.UPLOAD_IMAGE)
+    oce.add(OpCodes.SET_IMG_PROCESSOR_MODE, Info.SET_IMG_PROCESSOR_MODE)
     oce.add("6", "Star Tracker: Switch to bootloader program")
     oce.add("7", "Star Tracker: Request temperature")
     oce.add("8", "Star Tracker: Request version")
@@ -810,7 +847,6 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce.add("12", "Star Tracker: Boot image (requires bootloader mode)")
     oce.add("13", "Star Tracker: Request time")
     oce.add("14", "Star Tracker: Request solution")
-    oce.add("15", "Star Tracker: Upload image")
     oce.add("16", "Star Tracker: Download image")
     oce.add("17", "Star Tracker: Set limit parameters")
     oce.add("17", "Star Tracker: Set limit parameters")
@@ -832,7 +868,6 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce.add("37", "Star Tracker: Get checksum")
     oce.add("49", "Star Tracker: Request camera parameter")
     oce.add("50", "Star Tracker: Request limits")
-    oce.add("51", "Star Tracker: Set image processor parameters")
     oce.add("52", "Star Tracker: (EGSE only) Load camera ground config")
     oce.add("53", "Star Tracker: (EGSE only) Load camera flight config")
     oce.add("54", "Star Tracker: Request log level parameters")
@@ -850,7 +885,7 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
     oce.add("66", "Star Tracker: Set log level parameters")
     oce.add("67", "Star Tracker: Set log subscription parameters")
     oce.add("68", "Star Tracker: Set debug camera parameters")
-    oce.add("69", "Star Tracker: Firmware update")
+    oce.add(OpCodes.FW_UPDATE, Info.FW_UPDATE)
     oce.add("70", "Star Tracker: Disable timestamp generation")
     oce.add("71", "Star Tracker: Enable timestamp generation")
     defs.add_service(CustomServiceList.STAR_TRACKER.value, "Star Tracker", oce)

eive_tmtc/tmtc/com/ccsds_handler.py

@@ -48,6 +48,7 @@ class Submode(enum.IntEnum):
     UNSET = 0
     DATARATE_LOW = 1
     DATARATE_HIGH = 2
+    DATARATE_DEFAULT = 3
 
 
 class OpCode:

eive_tmtc/tmtc/com/defs.py

@@ -0,0 +1,10 @@
+import enum
+
+
+class Mode(enum.IntEnum):
+    NONE = 0
+    RX_ONLY = 10
+    RX_AND_TX_DEF_DATARATE = 11
+    RX_AND_TX_LOW_DATARATE = 12
+    RX_AND_TX_HIGH_DATARATE = 13
+    RX_AND_TX_CARRIER_WAVE = 14

eive_tmtc/tmtc/com/pdec_handler.py

@@ -5,11 +5,13 @@
 @author J. Meier
 @date   22.11.2021
 """
+import enum
+
 from spacepackets.ecss.tc import PusTelecommand
 from tmtccmd.tc import DefaultPusQueueHelper
 
 from tmtccmd.tc.pus_20_fsfw_param import create_load_param_cmd
-
+from tmtccmd.tc.pus_8_fsfw_funccmd import create_action_cmd
 from tmtccmd.pus.s20_fsfw_param_defs import create_scalar_u8_parameter
 
 from tmtccmd.config.tmtc import (
@@ -28,16 +30,23 @@ class CommandId:
     PRINT_PDEC_MON = bytearray([0x0, 0x0, 0x0, 0x1])
 
 
-class ParameterId:
+class ParameterId(enum.IntEnum):
     POSITIVE_WINDOW = 0
     NEGATIVE_WINDOW = 1
 
 
+class ActionId(enum.IntEnum):
+    RESET_NO_INIT = 2
+    RESET_WITH_INIT = 3
+
+
 class OpCode:
     PRINT_CLCW = "print_clcw"
     PRINT_MON_REG = "print_mon_reg"
     POSITIVE_WINDOW = "positive_window"
     NEGATIVE_WINDOW = "negative_window"
+    RESET_WITH_INIT = "reset_with_init"
+    RESET_NO_INIT = "reset_no_init"
 
 
 class Info:
@@ -47,6 +56,8 @@ class Info:
     )
     POSITIVE_WINDOW = "Change positive window parameter for AD frames"
     NEGATIVE_WINDOW = "Change negative window parameter for AD frames"
+    RESET_WITH_INIT = "Reset with full initialization"
+    RESET_NO_INIT = "Reset with mandatory initialization"
 
 
 def pack_pdec_handler_test(
@@ -88,6 +99,16 @@ def pack_pdec_handler_test(
                 ).pack()
             )
         )
+    if op_code == OpCode.RESET_NO_INIT:
+        q.add_log_cmd(f"{prefix}: {Info.RESET_NO_INIT}")
+        q.add_pus_tc(
+            create_action_cmd(object_id=object_id, action_id=ActionId.RESET_NO_INIT)
+        )
+    if op_code == OpCode.RESET_WITH_INIT:
+        q.add_log_cmd(f"{prefix}: {Info.RESET_WITH_INIT}")
+        q.add_pus_tc(
+            create_action_cmd(object_id=object_id, action_id=ActionId.RESET_WITH_INIT)
+        )
 
 
 @tmtc_definitions_provider
@@ -97,4 +118,6 @@ def add_pdec_cmds(defs: TmtcDefinitionWrapper):
     oce.add(OpCode.PRINT_MON_REG, Info.PRINT_MON_REG)
     oce.add(OpCode.POSITIVE_WINDOW, Info.POSITIVE_WINDOW)
     oce.add(OpCode.NEGATIVE_WINDOW, Info.NEGATIVE_WINDOW)
+    oce.add(OpCode.RESET_WITH_INIT, Info.RESET_WITH_INIT)
+    oce.add(OpCode.RESET_NO_INIT, Info.RESET_NO_INIT)
     defs.add_service(CustomServiceList.PDEC_HANDLER.value, "PDEC Handler", oce)

eive_tmtc/tmtc/com/subsystem.py

@@ -3,6 +3,9 @@ import enum
 from eive_tmtc.config.definitions import CustomServiceList
 from eive_tmtc.config.object_ids import COM_SUBSYSTEM_ID
 from eive_tmtc.tmtc.com.syrlinks_handler import Datarate
+
+from .defs import Mode as ComMode
+
 from tmtccmd.config.tmtc import (
     tmtc_definitions_provider,
     TmtcDefinitionWrapper,
@@ -29,14 +32,6 @@ class ParameterId(enum.IntEnum):
     TRANSMITTER_TIMEOUT = 1
 
 
-class Submode(enum.IntEnum):
-    RX_ONLY = 10
-    RX_AND_TX_DEF_DATARATE = 11
-    RX_AND_TX_LOW_DATARATE = 12
-    RX_AND_TX_HIGH_DATARATE = 13
-    RX_AND_TX_CARRIER_WAVE = 14
-
-
 class OpCode:
     RX_ONLY = "rx_only"
     TX_AND_RX_DEF_RATE = "rx_and_tx_default_rate"
@@ -72,21 +67,21 @@ def build_com_subsystem_cmd(p: ServiceProviderParams):
     prefix = "COM Subsystem"
     if o == OpCode.RX_ONLY:
         q.add_log_cmd(Info.RX_ONLY)
-        q.add_pus_tc(create_mode_command(COM_SUBSYSTEM_ID, Submode.RX_ONLY, 0))
+        q.add_pus_tc(create_mode_command(COM_SUBSYSTEM_ID, ComMode.RX_ONLY, 0))
     elif o == OpCode.TX_AND_RX_DEF_RATE:
         q.add_log_cmd(Info.TX_AND_RX_DEF_DATARATE)
         q.add_pus_tc(
-            create_mode_command(COM_SUBSYSTEM_ID, Submode.RX_AND_TX_DEF_DATARATE, 0)
+            create_mode_command(COM_SUBSYSTEM_ID, ComMode.RX_AND_TX_DEF_DATARATE, 0)
         )
     elif o == OpCode.TX_AND_RX_LOW_RATE:
         q.add_log_cmd(Info.TX_AND_RX_LOW_DATARATE)
         q.add_pus_tc(
-            create_mode_command(COM_SUBSYSTEM_ID, Submode.RX_AND_TX_LOW_DATARATE, 0)
+            create_mode_command(COM_SUBSYSTEM_ID, ComMode.RX_AND_TX_LOW_DATARATE, 0)
         )
     elif o == OpCode.TX_AND_RX_HIGH_RATE:
         q.add_log_cmd(Info.TX_AND_RX_HIGH_DATARATE)
         q.add_pus_tc(
-            create_mode_command(COM_SUBSYSTEM_ID, Submode.RX_AND_TX_HIGH_DATARATE, 0)
+            create_mode_command(COM_SUBSYSTEM_ID, ComMode.RX_AND_TX_HIGH_DATARATE, 0)
         )
     if o == OpCode.UPDATE_DEFAULT_DATARATE_LOW:
         q.add_log_cmd(f"{prefix}: {Info.UPDATE_DEFAULT_DATARATE_LOW}")
@@ -115,7 +110,7 @@ def build_com_subsystem_cmd(p: ServiceProviderParams):
     elif o == OpCode.TX_AND_RX_CARRIER_WAVE:
         q.add_log_cmd(Info.TX_AND_RX_CARRIER_WAVE)
         q.add_pus_tc(
-            create_mode_command(COM_SUBSYSTEM_ID, Submode.RX_AND_TX_CARRIER_WAVE, 0)
+            create_mode_command(COM_SUBSYSTEM_ID, ComMode.RX_AND_TX_CARRIER_WAVE, 0)
         )
     elif o == OpCode.CHANGE_TRANSMITTER_TIMEOUT:
         timeout = int(input("Specify timeout to set [ms]: "))

eive_tmtc/tmtc/com/syrlinks_handler.py

@@ -10,7 +10,7 @@ import logging
 import math
 
 from eive_tmtc.pus_tm.defs import PrintWrapper
-
+from eive_tmtc.tmtc.com.defs import Mode as ComMode
 from eive_tmtc.config.definitions import CustomServiceList
 from tmtccmd.config.tmtc import (
     tmtc_definitions_provider,
@@ -97,14 +97,6 @@ class CommandId(enum.IntEnum):
     DISABLE_DEBUG = 21
 
 
-class Submode(enum.IntEnum):
-    RX_ONLY = 0
-    RX_AND_TX_DEFAULT_DATARATE = 1
-    RX_AND_TX_LOW_DATARATE = 2
-    RX_AND_TX_HIGH_DATARATE = 3
-    RX_AND_TX_CW = 4
-
-
 class Datarate(enum.IntEnum):
     LOW_RATE_MODULATION_BPSK = 0
     HIGH_RATE_MODULATION_0QPSK = 1
@@ -161,23 +153,23 @@ def pack_syrlinks_command(
         q.add_pus_tc(create_mode_command(obyt, Mode.OFF, 0))
     if op_code == OpCode.ON:
         q.add_log_cmd(f"{prefix}: {Info.ON}")
-        q.add_pus_tc(create_mode_command(obyt, Mode.ON, 0))
+        q.add_pus_tc(create_mode_command(obyt, Mode.ON, ComMode.RX_ONLY))
     if op_code == OpCode.NORMAL_RX_ONLY:
-        normal_mode_cmd(q, Info.NORMAL_RX_ONLY, Submode.RX_ONLY)
+        normal_mode_cmd(q, Info.NORMAL_RX_ONLY, ComMode.RX_ONLY)
     if op_code == OpCode.NORMAL_RX_AND_TX_LOW_DATARATE:
         normal_mode_cmd(
-            q, Info.NORMAL_RX_AND_TX_LOW_DATARATE, Submode.RX_AND_TX_LOW_DATARATE
+            q, Info.NORMAL_RX_AND_TX_LOW_DATARATE, ComMode.RX_AND_TX_LOW_DATARATE
         )
     if op_code == OpCode.NORMAL_RX_AND_TX_DEF_DATARATE:
         normal_mode_cmd(
-            q, Info.NORMAL_RX_AND_TX_DEF_DATARATE, Submode.RX_AND_TX_DEFAULT_DATARATE
+            q, Info.NORMAL_RX_AND_TX_DEF_DATARATE, ComMode.RX_AND_TX_DEF_DATARATE
         )
     if op_code == OpCode.NORMAL_RX_AND_TX_HIGH_DATARATE:
         normal_mode_cmd(
-            q, Info.NORMAL_RX_AND_TX_HIGH_DATARATE, Submode.RX_AND_TX_HIGH_DATARATE
+            q, Info.NORMAL_RX_AND_TX_HIGH_DATARATE, ComMode.RX_AND_TX_HIGH_DATARATE
         )
     if op_code in OpCode.NORMAL_RX_AND_TX_CW:
-        normal_mode_cmd(q, Info.NORMAL_RX_AND_TX_CW, Submode.RX_AND_TX_CW)
+        normal_mode_cmd(q, Info.NORMAL_RX_AND_TX_CW, ComMode.RX_AND_TX_CARRIER_WAVE)
     if op_code in OpCode.HK_RX_REGS:
         q.add_log_cmd(f"{prefix}: {Info.HK_RX_REGS}")
         sid = make_sid(obyt, SetId.RX_REGISTERS_DATASET)
@@ -312,7 +304,13 @@ def handle_syrlinks_rx_registers_dataset(printer: FsfwTmTcPrinter, hk_data: byte
     rx_agc = rx_agc_value & 0xFFF
     rx_demod_eb = struct.unpack("!I", hk_data[13:17])[0] & 0xFFFFFF
     rx_demod_n0 = struct.unpack("!I", hk_data[17:21])[0] & 0xFFFFFF
-    eb_to_n0 = 20 * math.log10(rx_demod_eb / rx_demod_n0) - 3
+    if rx_demod_n0 > 0:
+        eb_to_n0 = 20 * math.log10(rx_demod_eb / rx_demod_n0) - 3
+    else:
+        logging.getLogger(__name__).warning(
+            "RX Demod N0 is 0, can not calculate Eb to N0"
+        )
+        eb_to_n0 = 0
     rx_data_rate_raw = hk_data[21]
     rx_data_rate = -1
     if rx_data_rate_raw == 0:

eive_tmtc/tmtc/core.py

@@ -11,6 +11,10 @@ from tmtccmd.config import TmtcDefinitionWrapper
 from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.pus.s8_fsfw_funccmd import create_action_cmd
 from tmtccmd.tc.pus_3_fsfw_hk import make_sid, generate_one_hk_command
+from tmtccmd.tc.pus_20_fsfw_param import (
+    create_scalar_u8_parameter,
+    create_load_param_cmd,
+)
 from tmtccmd.config.tmtc import OpCodeEntry, tmtc_definitions_provider
 from eive_tmtc.config.object_ids import CORE_CONTROLLER_ID
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
@@ -35,6 +39,13 @@ class ActionId(enum.IntEnum):
     SWITCH_TO_BOTH_SD_CARDS = 18
     XSC_REBOOT = 32
     FULL_REBOOT = 34
+    EXECUTE_SHELL_CMD_BLOCKING = 40
+    EXECUTE_SHELL_CMD_NON_BLOCKING = 41
+    SYSTEMCTL_CMD_EXECUTOR = 42
+
+
+class ParamId(enum.IntEnum):
+    PREF_SD = 0
 
 
 class SetId(enum.IntEnum):
@@ -45,6 +56,10 @@ class OpCode:
     ANNOUNCE_VERSION = "announce_version"
     ANNOUNCE_CURRENT_IMAGE = "announce_current_image"
     ANNOUNCE_BOOT_COUNTS = "announce_boot_counts"
+    EXECUTE_SHELL_CMD_BLOCKING = "exec_cmd_blocking"
+    EXECUTE_SHELL_CMD_NON_BLOCKING = "exec_cmd_non_blocking"
+    SYSTEMCTL_CMD_EXECUTOR = "systemctl_cmd"
+    SET_PREF_SD = "set_pref_sd"
     REBOOT_XSC = ["reboot_xsc"]
     XSC_REBOOT_SELF = ["reboot_self"]
     XSC_REBOOT_0_0 = ["reboot_00"]
@@ -73,6 +88,10 @@ class Info:
     ANNOUNCE_VERSION = "Announce version"
     ANNOUNCE_CURRENT_IMAGE = "Announce current image"
     ANNOUNCE_BOOT_COUNTS = "Announce boot counts"
+    SYSTEMCTL_CMD_EXECUTOR = "Perform systemctl command"
+    EXECUTE_SHELL_CMD_BLOCKING = "Execute shell command blocking"
+    EXECUTE_SHELL_CMD_NON_BLOCKING = "Execute shell command non-blocking"
+    SET_PREF_SD = "Set preferred SD card"
     REBOOT_XSC = "XSC reboot with prompt"
     REBOOT_FULL = "Full regular reboot"
     OBSW_UPDATE_FROM_SD_0 = "Update OBSW from SD Card 0"
@@ -95,6 +114,12 @@ class Copy(enum.IntEnum):
     NONE = 2
 
 
+class SystemctlCmd(enum.IntEnum):
+    START = 0
+    STOP = 1
+    RESTART = 2
+
+
 @tmtc_definitions_provider
 def add_core_controller_definitions(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
@@ -109,9 +134,18 @@ def add_core_controller_definitions(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.XSC_REBOOT_0_1, info="Reboot 0 1")
     oce.add(keys=OpCode.XSC_REBOOT_1_0, info="Reboot 1 0")
     oce.add(keys=OpCode.XSC_REBOOT_1_1, info="Reboot 1 1")
+    oce.add(keys=OpCode.SET_PREF_SD, info=Info.SET_PREF_SD)
     oce.add(keys=OpCode.OBSW_UPDATE_FROM_TMP, info=Info.OBSW_UPDATE_FROM_TMP)
     oce.add(keys=OpCode.OBSW_UPDATE_FROM_SD_0, info=Info.OBSW_UPDATE_FROM_SD_0)
     oce.add(keys=OpCode.OBSW_UPDATE_FROM_SD_1, info=Info.OBSW_UPDATE_FROM_SD_1)
+    oce.add(keys=OpCode.SYSTEMCTL_CMD_EXECUTOR, info=Info.SYSTEMCTL_CMD_EXECUTOR)
+    oce.add(
+        keys=OpCode.EXECUTE_SHELL_CMD_BLOCKING, info=Info.EXECUTE_SHELL_CMD_BLOCKING
+    )
+    oce.add(
+        keys=OpCode.EXECUTE_SHELL_CMD_NON_BLOCKING,
+        info=Info.EXECUTE_SHELL_CMD_NON_BLOCKING,
+    )
     oce.add(
         keys=OpCode.GET_HK,
         info="Request housekeeping set",
@@ -184,6 +218,41 @@ def pack_core_commands(q: DefaultPusQueueHelper, op_code: str):
         )
     elif op_code in OpCode.XSC_REBOOT_SELF:
         add_xsc_reboot_cmd(q=q, reboot_self=True)
+    elif op_code == OpCode.SYSTEMCTL_CMD_EXECUTOR:
+        print("systemctl command types: ")
+        for entry in SystemctlCmd:
+            print(f"{entry}: {entry.name}")
+        systemctl_cmd = SystemctlCmd(
+            int(input("Specify systemctl command type by key: "))
+        )
+        unit_name = input("Specify unit name: ")
+        cmd_data = bytearray([systemctl_cmd])
+        cmd_data.extend(unit_name.encode())
+        q.add_pus_tc(
+            create_action_cmd(
+                object_id=CORE_CONTROLLER_ID,
+                action_id=ActionId.SYSTEMCTL_CMD_EXECUTOR,
+                user_data=cmd_data,
+            )
+        )
+    elif op_code == OpCode.EXECUTE_SHELL_CMD_BLOCKING:
+        custom_cmd = input("Please specify command to execute: ")
+        q.add_pus_tc(
+            create_action_cmd(
+                object_id=CORE_CONTROLLER_ID,
+                action_id=ActionId.EXECUTE_SHELL_CMD_BLOCKING,
+                user_data=custom_cmd.encode(),
+            )
+        )
+    elif op_code == OpCode.EXECUTE_SHELL_CMD_NON_BLOCKING:
+        custom_cmd = input("Please specify command to execute: ")
+        q.add_pus_tc(
+            create_action_cmd(
+                object_id=CORE_CONTROLLER_ID,
+                action_id=ActionId.EXECUTE_SHELL_CMD_NON_BLOCKING,
+                user_data=custom_cmd.encode(),
+            )
+        )
     elif op_code in OpCode.XSC_REBOOT_0_0:
         add_xsc_reboot_cmd(
             q=q, reboot_self=False, chip=Chip.CHIP_0, copy=Copy.COPY_0_NOM
@@ -267,7 +336,7 @@ def pack_core_commands(q: DefaultPusQueueHelper, op_code: str):
         )
     elif op_code in OpCode.SWITCH_TO_BOTH_SD_CARDS:
         while True:
-            active_sd_card = int(input("Please specify active SD cqrd [0/1]: "))
+            active_sd_card = int(input("Please specify active SD card [0/1]: "))
             if active_sd_card not in [0, 1]:
                 _LOGGER.warning("Invalid SD card specified. Try again")
             break
@@ -283,6 +352,23 @@ def pack_core_commands(q: DefaultPusQueueHelper, op_code: str):
         q.add_log_cmd("Requesting housekeeping set")
         sid = make_sid(object_id=CORE_CONTROLLER_ID, set_id=SetId.HK)
         q.add_pus_tc(generate_one_hk_command(sid))
+    elif op_code in OpCode.SET_PREF_SD:
+        q.add_log_cmd("Set preferred SD card")
+        pref_sd = int(
+            input("Specify which SD card to set as the preferred one (0/1): ")
+        )
+        if pref_sd not in [0, 1]:
+            raise ValueError("Only 0 or 1 allowed for preferred SD card")
+        q.add_pus_tc(
+            create_load_param_cmd(
+                create_scalar_u8_parameter(
+                    object_id=CORE_CONTROLLER_ID,
+                    domain_id=0,
+                    unique_id=ParamId.PREF_SD,
+                    parameter=pref_sd,
+                ).pack()
+            )
+        )
     else:
         _LOGGER.warning(
             f"Unknown operation code {op_code} for core controller commands"
@@ -343,7 +429,11 @@ def determine_chip_and_copy() -> (int, int):
 
 def pack_obsw_update_cmd(action_id: int) -> PusTelecommand:
     chip, copy = determine_chip_and_copy()
-    user_data = bytes([chip, copy])
+    user_data = bytearray([chip, copy])
+    custom_file_name = input("Use custom filename [y/n] ?: ")
+    if custom_file_name.lower() in ["y", "yes", "1"]:
+        custom_file_name = input("Specify custom filename: ")
+        user_data.extend(custom_file_name.encode())
     return create_action_cmd(
         object_id=CORE_CONTROLLER_ID, action_id=action_id, user_data=user_data
     )

eive_tmtc/tmtc/obj_prompt.py

@@ -2,11 +2,20 @@ from eive_tmtc.config.object_ids import (
     ACS_SUBSYSTEM_ID,
     ACS_CONTROLLER,
     IMTQ_HANDLER_ID,
+    GPS_0_HEALTH_DEV,
+    GPS_1_HEALTH_DEV,
     GYRO_0_ADIS_HANDLER_ID,
     GYRO_1_L3G_HANDLER_ID,
     ACS_BOARD_ASS_ID,
     RW_ASSEMBLY,
     SUS_BOARD_ASS_ID,
+    MGM_0_LIS3_HANDLER_ID,
+    MGM_1_RM3100_HANDLER_ID,
+    SUS_0_N_LOC_XFYFZM_PT_XF,
+    SUS_6_R_LOC_XFYBZM_PT_XF,
+    RW1_ID,
+    RW2_ID,
+    RTD_0_PLOC_HSPD,
 )
 
 SUBSYSTEM_DICT = {
@@ -23,8 +32,29 @@ ACS_OBJ_DICT = {
     4: ("iMTQ MGT", IMTQ_HANDLER_ID),
     5: ("GYR 0 ADIS", GYRO_0_ADIS_HANDLER_ID),
     6: ("GYR 1 L3G", GYRO_1_L3G_HANDLER_ID),
+    7: ("MGM 0 LIS3", MGM_0_LIS3_HANDLER_ID),
+    8: ("MGM 1 RM3100", MGM_1_RM3100_HANDLER_ID),
+    9: ("GPS 0 Health Device", GPS_0_HEALTH_DEV),
+    10: ("SUS 0", SUS_0_N_LOC_XFYFZM_PT_XF),
+    11: ("SUS 6", SUS_6_R_LOC_XFYBZM_PT_XF),
+    12: ("RW 1", RW1_ID),
+    13: ("RW 2", RW2_ID),
 }
 
+TCS_OBJ_DICT = {
+    0: ("RTD 0", RTD_0_PLOC_HSPD),
+}
+
+
+def get_obj_if_from_dict(lut: dict) -> bytes:
+    for k, v in lut.items():
+        print(f"{k}: {v[0]}")
+    obj_key = int(input("Please specify target object by key: "))
+    name_and_obj_id = lut[obj_key]
+    if name_and_obj_id is None:
+        raise ValueError("invalid key")
+    return name_and_obj_id[1]
+
 
 def prompt_object() -> bytes:
     for k, v in SUBSYSTEM_DICT.items():
@@ -34,10 +64,9 @@ def prompt_object() -> bytes:
     if subsystem is None:
         raise ValueError("invalid key")
     if subsystem == "acs":
-        for k, v in ACS_OBJ_DICT.items():
-            print(f"{k}: {v[0]}")
-        obj_key = int(input("Please specify target object by key: "))
-        acs_obj = ACS_OBJ_DICT[obj_key]
-        if acs_obj is None:
-            raise ValueError("invalid key")
-        return acs_obj[1]
+        return get_obj_if_from_dict(ACS_OBJ_DICT)
+    elif subsystem == "tcs":
+        return get_obj_if_from_dict(TCS_OBJ_DICT)
+    else:
+        print(f"No object for subsystem {subsystem}")
+        return bytes()

eive_tmtc/tmtc/power/pdu1.py

@@ -255,7 +255,7 @@ def mgt_off_cmd(q: DefaultPusQueueHelper):
 
 
 def create_mgt_off_cmd() -> PusTelecommand:
-    return create_generic_on_cmd(PDU_1_HANDLER_ID, Pdu1ChIndex.MGT)
+    return create_generic_off_cmd(PDU_1_HANDLER_ID, Pdu1ChIndex.MGT)
 
 
 def sun_sensor_nominal_on_cmd(q: DefaultPusQueueHelper):

eive_tmtc/tmtc/power/pdu2.py

@@ -284,7 +284,7 @@ def heater_off_cmd(q: DefaultPusQueueHelper):
 
 
 def create_heater_off_cmd() -> PusTelecommand:
-    return create_generic_on_cmd(PDU_2_HANDLER_ID, Pdu2ChIndex.HEATER)
+    return create_generic_off_cmd(PDU_2_HANDLER_ID, Pdu2ChIndex.HEATER)
 
 
 def sus_red_on_cmd(q: DefaultPusQueueHelper):
@@ -372,4 +372,4 @@ def payload_camera_off_cmd(q: DefaultPusQueueHelper):
 
 
 def create_payload_camera_off_cmd() -> PusTelecommand:
-    return create_generic_on_cmd(PDU_2_HANDLER_ID, Pdu2ChIndex.PL_CAM)
+    return create_generic_off_cmd(PDU_2_HANDLER_ID, Pdu2ChIndex.PL_CAM)

eive_tmtc/tmtc/power/power.py

@@ -49,6 +49,31 @@ class PcduSetIds(enum.IntEnum):
     SWITCHER_SET = 0
 
 
+class PcduSwitches(enum.IntEnum):
+    PDU1_CH0_TCS_BOARD_3V3 = 0
+    PDU1_CH1_SYRLINKS_12V = 1
+    PDU1_CH2_STAR_TRACKER_5V = 2
+    PDU1_CH3_MGT_5V = 3
+    PDU1_CH4_SUS_NOMINAL_3V3 = 4
+    PDU1_CH5_SOLAR_CELL_EXP_5V = 5
+    PDU1_CH6_PLOC_12V = 6
+    PDU1_CH7_ACS_A_SIDE_3V3 = 7
+    PDU1_CH8_UNOCCUPIED = 8
+
+    PDU2_CH0_Q7S = 9
+    PDU2_CH1_PL_PCDU_BATT_0_14V8 = 10
+    PDU2_CH2_RW_5V = 11
+    PDU2_CH3_TCS_BOARD_HEATER_IN_8V = 12
+    PDU2_CH4_SUS_REDUNDANT_3V3 = 13
+    PDU2_CH5_DEPLOYMENT_MECHANISM_8V = 14
+    PDU2_CH6_PL_PCDU_BATT_1_14V8 = 15
+    PDU2_CH7_ACS_BOARD_SIDE_B_3V3 = 16
+    PDU2_CH8_PAYLOAD_CAMERA = 17
+
+    P60_DOCK_5V_STACK = 18
+    P60_DOCK_3V3_STACK = 19
+
+
 def pack_power_commands(q: DefaultPusQueueHelper, op_code: str):
     pdu1_switch_cmds(q, op_code)
     pdu2_switch_cmds(q, op_code)

eive_tmtc/tmtc/power/tm.py

@@ -566,7 +566,9 @@ def handle_pcdu_hk(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
         current_idx += len(PDU1_CHANNELS_NAMES)
         pdu2_vals = [hk_data[i + current_idx] for i in range(len(PDU2_CHANNELS_NAMES))]
         current_idx += len(PDU2_CHANNELS_NAMES)
-        p60_stack_val = hk_data[current_idx]
+        p60_stack_5v_val = hk_data[current_idx]
+        current_idx += 1
+        p60_stack_3v3_val = hk_data[current_idx]
         current_idx += 1
         pw.dlog("PDU1 Switcher States")
         for name, val in zip(PDU1_CHANNELS_NAMES, pdu1_vals):
@@ -574,5 +576,6 @@ def handle_pcdu_hk(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
         pw.dlog("PDU2 Switcher States")
         for name, val in zip(PDU2_CHANNELS_NAMES, pdu2_vals):
             pw.dlog(f"{name.ljust(25)}: {val}")
-        pw.dlog(f"{'P60 Dock 5V Stack'.ljust(25)}: {p60_stack_val}")
-        pw.printer.print_validity_buffer(hk_data[current_idx:], 3)
+        pw.dlog(f"{'P60 Dock 5V Stack'.ljust(25)}: {p60_stack_5v_val}")
+        pw.dlog(f"{'P60 Dock 3V3 Stack'.ljust(25)}: {p60_stack_3v3_val}")
+        pw.printer.print_validity_buffer(hk_data[current_idx:], 4)

eive_tmtc/tmtc/system.py

@@ -1,3 +1,5 @@
+import enum
+
 from eive_tmtc.config.definitions import CustomServiceList
 from eive_tmtc.tmtc.acs.subsystem import AcsMode
 from tmtccmd.config.tmtc import (
@@ -12,19 +14,34 @@ from tmtccmd.tc.pus_200_fsfw_mode import (
     Mode,
     create_announce_mode_recursive_command,
 )
+from tmtccmd.tc.pus_8_fsfw_funccmd import create_action_cmd
 from tmtccmd.tc.decorator import ServiceProviderParams
 
 
+class SystemMode:
+    BOOT = 5
+    SAFE = AcsMode.SAFE
+    IDLE = AcsMode.IDLE
+
+
+class ActionId(enum.IntEnum):
+    EXECUTE_I2C_REBOOT = 10
+
+
 class OpCode:
+    BOOT_MODE = "boot"
     SAFE_MODE = "safe"
     IDLE_MODE = "idle"
     ANNOUNCE_MODES = "announce_modes"
+    REBOOT_I2C = "reboot_i2c"
 
 
 class Info:
+    BOOT_MODE = "Command System into Boot Mode"
     SAFE_MODE = "Command System into Safe Mode"
     IDLE_MODE = "Command System into Idle Pointing Mode"
     ANNOUNCE_MODES = "Announce mode recursively"
+    REBOOT_I2C = "Reboot I2C bus"
 
 
 @service_provider(CustomServiceList.SYSTEM.value)
@@ -34,21 +51,29 @@ def build_system_cmds(p: ServiceProviderParams):
     prefix = "EIVE System"
     if o == OpCode.SAFE_MODE:
         q.add_log_cmd(f"{prefix}: {Info.SAFE_MODE}")
-        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, AcsMode.SAFE, 0))
+        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, SystemMode.SAFE, 0))
     elif o == OpCode.IDLE_MODE:
         q.add_log_cmd(f"{prefix}: {Info.IDLE_MODE}")
-        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, AcsMode.IDLE, 0))
+        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, SystemMode.IDLE, 0))
     elif o == OpCode.ANNOUNCE_MODES:
         q.add_log_cmd(f"{prefix}: {Info.ANNOUNCE_MODES}")
         q.add_pus_tc(create_announce_mode_recursive_command(EIVE_SYSTEM_ID))
+    elif o == OpCode.BOOT_MODE:
+        q.add_log_cmd(f"{prefix}: {Info.BOOT_MODE}")
+        q.add_pus_tc(create_mode_command(EIVE_SYSTEM_ID, SystemMode.BOOT, 0))
+    elif o == OpCode.REBOOT_I2C:
+        q.add_log_cmd(f"{prefix}: {Info.REBOOT_I2C}")
+        q.add_pus_tc(create_action_cmd(EIVE_SYSTEM_ID, ActionId.EXECUTE_I2C_REBOOT))
 
 
 @tmtc_definitions_provider
 def add_system_cmd_defs(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
+    oce.add(keys=OpCode.BOOT_MODE, info=Info.BOOT_MODE)
     oce.add(keys=OpCode.SAFE_MODE, info=Info.SAFE_MODE)
     oce.add(keys=OpCode.IDLE_MODE, info=Info.IDLE_MODE)
     oce.add(keys=OpCode.ANNOUNCE_MODES, info=Info.ANNOUNCE_MODES)
+    oce.add(keys=OpCode.REBOOT_I2C, info=Info.REBOOT_I2C)
     defs.add_service(
         name=CustomServiceList.SYSTEM.value,
         info="EIVE system commands",