some more fixes

Reviewed-on: fsfw/fsfw#606

CHANGELOG

@@ -1,175 +0,0 @@
-# Changed from ASTP 1.1.0 to 1.2.0
-
-## API Changes
-
-### FSFW Architecture
-
-- New src folder which contains all source files except the HAL, contributed code and test code
-- External and internal API mostly stayed the same
-- Folder names are now all smaller case: internalError was renamed to internalerror and
-  FreeRTOS was renamed to freertos
-- Warning if optional headers are used but the modules was not added to the source files to compile
-
-### HAL
-
-- HAL added back into FSFW. It is tightly bound to the FSFW, and compiling it as a static library
-  made using it more complicated than necessary
-
-## Bugfixes
-
-### FreeRTOS QueueMapManager
-
-- Fixed a bug which causes the first generated Queue ID to be invalid
-
-## Enhancements
-
-### FSFW Architecture
-
-- See API changes chapter. This change will keep the internal API consistent in the future
-
-# Changes from ASTP 1.0.0 to 1.1.0
-
-## API Changes
-
-### PUS
-
-- Added PUS C support
-- SUBSYSTEM_IDs added for PUS Services
-- Added new Parameter which must be defined in config: fsfwconfig::FSFW_MAX_TM_PACKET_SIZE
-
-### ObjectManager
-
- - ObjectManager is now a singelton
-
-
-### Configuration
-
-- Additional configuration option fsfwconfig::FSFW_MAX_TM_PACKET_SIZE which 
-  need to be specified in FSFWConfig.h
-
-### CMake
-
-- Changed Cmake FSFW_ADDITIONAL_INC_PATH to FSFW_ADDITIONAL_INC_PATHS
-
-## Bugfixes 
-
-- timemanager/TimeStamperIF.h: Timestamp config was not used correctly, leading to different timestamp sizes than configured in fsfwconfig::FSFW_MISSION_TIMESTAMP_SIZE
-- TCP server fixes
-
-## Enhancements
-
-### FreeRTOS Queue Handles
-
-- Fixed an internal issue how FreeRTOS MessageQueues were handled
-
-### Linux OSAL
-
-- Better printf error messages
-
-### CMake
-
-- Check for C++11 as mininimum required Version
-
-### Debug Output
-
-- Changed Warning color to magenta, which is well readable on both dark and light mode IDEs
-
-
-# Changes from ASTP 0.0.1 to 1.0.0
-
-### Host OSAL
-
-- Bugfix in MessageQueue, which caused the sender not to be set properly
-
-### FreeRTOS OSAL
-
-- vRequestContextSwitchFromISR is declared extern "C" so it can be defined in
-a C file without issues
-
-### PUS Services
-
-- It is now possible to change the message queue depth for the telecommand verification service (PUS1)
-- The same is possible for the event reporting service (PUS5)
-- PUS Health Service added, which allows to command and retrieve health via PUS packets
-
-
-### EnhancedControllerBase
-
-- New base class for a controller which also implements HasActionsIF and HasLocalDataPoolIF
-
-### Local Pool
-
-- Interface of LocalPools has changed. LocalPool is not a template anymore. Instead the size and
-bucket number of the pools per page and the number of pages are passed to the ctor instead of
-two ctor arguments and a template parameter
-
-### Parameter Service
-
-- The API of the parameter service has been changed to prevent inconsistencies
-between documentation and actual code and to clarify usage.
-- The parameter ID now consists of:
-	1. Domain ID (1 byte)
-	2. Unique Identifier (1 byte)
-	3. Linear Index (2 bytes)
-The linear index can be used for arrays as well as matrices.
-The parameter load command now explicitely expects the ECSS PTC and PFC
-information as well as  the rows and column number. Rows and column will
-default to one, which is equivalent to one scalar parameter (the most
-important use-case)
-   
-### File System Interface
-
-- A new interfaces specifies the functions for a software object which exposes the file system of
-a given hardware to use message based file handling (e.g. PUS commanding)
-
-### Internal Error Reporter
-
-- The new internal error reporter uses the local data pools. The pool IDs for
-the exisiting three error values and the new error set will be hardcoded for
-now, the the constructor for the internal error reporter just takes an object
-ID for now.
-
-### Device Handler Base
-
-- There is an additional `PERFORM_OPERATION` step for the device handler base. It is important
-that DHB users adapt their polling sequence tables to perform this step. This steps allows for 
-a clear distinction between operation and communication steps
-- setNormalDatapoolEntriesInvalid is not an abstract method and a default implementation was provided
-- getTransitionDelayMs is now an abstract method
-
-### DeviceHandlerIF
-
-- Typo for UNKNOWN_DEVICE_REPLY 
-
-### Events
-
-- makeEvent function: Now takes three input parameters instead of two and
-allows setting a unique ID. Event.cpp source file removed, functions now
-defined in header directly. Namespaces renamed. Functions declared `constexpr`
-now
-
-### Commanding Service Base
-
-- CSB uses the new fsfwconfig::FSFW_CSB_FIFO_DEPTH variable to determine  the FIFO depth for each 
-CSB instance. This variable has to be set in the FSFWConfig.h file
-
-### Service Interface
-
-- Proper printf support contained in ServiceInterfacePrinter.h
-- CPP ostream support now optional (can reduce executable size by 150 - 250 kB)
-- Amalagated header which determines automatically which service interface to use depending on FSFWConfig.h configuration. 
-  Users can just use #include <fsfw/serviceinterface/ServiceInterface.h>
-- If CPP streams are excluded, sif:: calls won't work anymore and need to be replaced by their printf counterparts. 
-  For the fsfw, this can be done by checking the processor define FSFW_CPP_OSTREAM_ENABLED from FSFWConfig.h. 
-  For mission code, developers need to replace sif:: calls by the printf counterparts, but only if the CPP stream are excluded. 
-  If this is not the case, everything should work as usual.
-
-### ActionHelper and ActionMessage
-
-- ActionHelper finish function and ActionMessage::setCompletionReply now expects explicit 
-information whether to report a success or failure message instead of deriving it implicitely 
-from returnvalue
-
-### PUS Parameter Service 20
-
-Added PUS parameter service 20 (only custom subservices available).

CHANGELOG.md

@@ -0,0 +1,465 @@
+Change Log
+=======
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](http://keepachangelog.com/)
+and this project adheres to [Semantic Versioning](http://semver.org/).
+
+# [unreleased]
+
+# [v5.0.0]
+
+## Changes
+
+- Bump C++ required version to C++17. Every project which uses the FSFW and every modern
+  compiler supports it
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/622
+- HAL Linux SPI: Set the Clock Default State when setting new SPI speed
+  and mode
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/573
+- GPIO HAL: `Direction`, `GpioOperation` and `Levels` are enum classes now, which prevents
+  name clashes with Windows defines.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/572
+- New CMake option `FSFW_HAL_LINUX_ADD_LIBGPIOD` to specifically exclude `gpiod` code.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/572
+- HAL Devicehandlers: Periodic printout is run-time configurable now
+- `oneShotAction` flag in the `TestTask` class is not static anymore
+- HAL Linux Uart: Baudrate and bits per word are enums now, avoiding misconfigurations
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/585
+- Major update for version handling, using `git describe` to fetch version information with git.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/601
+  - Add helper functions provided by [`cmake-modules`](https://github.com/bilke/cmake-modules)
+    manually now. Those should not change too often and only a small subset is needed
+  - Separate folder for easier update and for distinction
+  - Add helper functions provided by [`cmake-modules`](https://github.com/rpavlik/cmake-modules)
+    manually now. Those should not change too often and only a small subset is needed
+  - Separate folder for easier update and for distinction
+  - LICENSE file included
+  - use `int` for version numbers to allow unset or uninitialized version
+  - Initialize Version object with numbers set to -1
+  - Instead of hardcoding the git hash, it is now retrieved from git
+  - `Version` now allows specifying additional version information like the git SHA1 hash and the
+    versions since the last tag
+  - Additional information is set to the last part of the git describe output for `FSFW_VERSION` now.
+  - Version still need to be hand-updated if the FSFW is not included as a submodule for now.
+  - CMake will auto-generate a file named `versionAutogen.cpp` on each rebuild which contains
+    the version retrieved with git
+- IPC Message Queue Handling: Allow passing an optional `MqArgs` argument into the MessageQueue
+  creation call. It allows passing context information and an arbitrary user argument into
+  the message queue. Also streamlined and simplified `MessageQueue` implementation for all OSALs
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/583
+- Clock: 
+  - `timeval` to `TimeOfDay_t`
+  - Added Mutex for gmtime calls: (compare http://www.opengate.at/blog/2020/01/timeless/)
+  - Moved the statics used by Clock in ClockCommon.cpp to this file
+  - Better check for leap seconds
+  - Added Unittests for Clock (only getter)
+
+## Removed
+
+- Removed the `HkSwitchHelper`. This module should not be needed anymore, now that the local
+  datapools have been implemented.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/557
+
+## Additions
+
+- Linux HAL: Add wiretapping option for I2C. Enabled with `FSFW_HAL_I2C_WIRETAPPING` defined to 1
+- Dedicated Version class and constant `fsfw::FSFW_VERSION` containing version information
+  inside `fsfw/version.h`
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/559
+- Added ETL dependency and improved library dependency management
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/592
+- `Subsystem`: New API to add table and sequence entries
+
+## Fixed
+
+- TCP TMTC Server: `MutexGuard` was not created properly in
+  `TcpTmTcServer::handleTmSending(socket_t connSocket, bool& tmSent)` call.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/618
+- Fix infinite recursion in `prepareHealthSetReply` of PUS Health Service 201.
+  Is not currently used right now but might be used in the future
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/617
+- Move some CMake directives further up top so they are not ignored
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/621
+- Small bugfix in STM32 HAL for SPI
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/599
+- HAL GPIO: Improved error checking in `LinuxLibgpioIF::configureGpios(...)`. If a GPIO
+  configuration fails, the function will exit prematurely with a dedicated error code
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/602
+
+# [v4.0.0]
+
+## Additions
+
+- CFDP Packet Stack and related tests added. It also refactors the existing TMTC infastructure to
+  allow sending of CFDP packets to the CCSDS handlers.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/528
+- added virtual function to print datasets
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/544
+- doSendRead Hook
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/545
+- Dockumentation for DHB
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/551
+  
+### HAL additions
+
+- Linux Command Executor, which can execute shell commands in blocking and non-blocking mode
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/536
+- uio Mapper
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/543
+
+## Changes
+
+- Applied the `clang-format` auto-formatter to all source code
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/534
+- Updated Catch2 to v3.0.0-preview4
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/538
+- Changed CI to use prebuilt docker image
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/549
+
+## Bugfix
+
+- CMake fixes in PR https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/533 , was problematic
+  if the uppermost user `CMakeLists.txt` did not have the include paths set up properly, which
+  could lead to compile errors that `#include "fsfw/FSFW.h"` was not found.
+- Fix for build regression in Catch2 v3.0.0-preview4
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/548
+- Fix in unittest which failed on CI
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/552
+- Fix in helper script
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/553
+
+## API Changes
+
+- Aforementioned changes to existing TMTC stack
+
+## Known bugs
+
+- 
+
+# [v3.0.1]
+
+## API Changes
+
+* 
+
+## Bugfixes
+
+* Version number was not updated for v3.0.0 #542
+
+## Enhancement
+
+* 
+
+## Known bugs
+
+* 
+
+# [v3.0.0]
+
+## API Changes
+
+#### TCP Socket Changes
+
+* Keep Open TCP Implementation #496
+    * The socket will now kept open after disconnect. This allows reconnecting. 
+    * Only one connection is allowed
+    * No internal influence but clients need to change their Code.
+
+### GPIO IF
+
+* Add feature to open GPIO by line name #506
+
+### Bitutil
+
+* Unittests for Op Divider and Bitutility #510
+
+### Filesystem IF changed
+
+*  Filesystem Base Interface: Use IF instead of void pointer #511 
+
+### STM32
+
+* STM32 SPI Updates #518
+
+## Bugfixes
+
+* Small bugfix for LIS3 handler #504
+* Spelling fixed for function names #509
+* CMakeLists fixes #517
+* Out of bound reads and writes in unittests #519
+* Bug in TmPacketStoredPusC (#478)
+* Windows ifdef fixed #529
+
+## Enhancement
+
+* FSFW.h.in more default values #491
+* Minor updates for PUS services #498
+* HasReturnvaluesIF naming for parameter #499
+* Tests can now be built as part of FSFW and versioning moved to CMake #500
+*  Added integration test code #508 
+* More printouts for rejected TC packets #505
+* Arrayprinter format improvements #514
+* Adding code for CI with docker and jenkins #520
+* Added new function in SerializeAdapter  #513
+    *  Enables simple deSerialize if you keep track of the buffer position yourself
+    *  `` static ReturnValue_t deSerialize(T *object, const uint8_t* buffer,
+            size_t* deserSize, SerializeIF::Endianness streamEndianness) ``
+* Unittest helper scripts has a new Parameter to open the coverage html in the webrowser  #525
+    * ``'-o', '--open', Open coverage data in webbrowser`` 
+* Documentation updated. Sphinx Documentation can now be build with python script #526
+
+## Known bugs
+
+* Version number was not updated for v3.0.0 #542
+
+
+All Pull Requests:
+
+Milestone: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/milestone/19
+
+# [v2.0.0]
+
+## API Changes
+
+
+### File Structure changed to fit more common structure
+
+* See pull request (#445)
+  * HAL is now part of the main project
+    * **See Instructions below:**
+
+#### Instruction how to update existing / user code
+
+* Changes in `#include`:
+  * Rename `internalError` in includes to `internalerror`
+  * Rename `fsfw/hal` to `fsfw_hal`
+  * Rename `fsfw/tests` to `fsfw_tests`
+  * Rename `osal/FreeRTOS` to `osal/freertos`
+
+* Changes in `CMakeLists.txt`: 
+  * Rename `OS_FSFW` to `FSFW_OSAL`
+
+* Changes in `DleEncoder.cpp`
+    * Create an instance of the `DleEncoder` first before calling the `encode` and `decode` functions
+
+### Removed osal/linux/Timer (#486)
+
+* Was redundant to timemanager/Countdown
+
+#### Instruction how to update existing / user code
+
+* Use timemanager/Countdown instead
+
+## Bugfixes
+
+### TM Stack
+
+* Increased TM stack robustness by introducing `nullptr` checks and more printouts (#483)
+
+#### Host OSAL / FreeRTOS 
+
+* QueueMapManager Bugfix (NO_QUEUE was used as MessageQueueId) (#444)
+
+#### Events
+
+* Event output is now consistent (#447)
+
+#### DLE Encoder
+
+* Fixed possible out of bounds access in DLE Encoder (#492)
+
+## Enhancment
+
+* HAL as major new feature, also includes three MEMS devicehandlers as part of #481
+* Linux HAL updates (#456)
+* FreeRTOS Header cleaning update and Cmake tweaks (#442)
+* Printer updates (#453)
+* New returnvalue for for empty PST (#485)
+* TMTC Bridge: Increase limit of packets stored (#484)
+
+## Known bugs
+
+* Bug in TmPacketStoredPusC (#478)
+
+
+All Pull Requests:
+
+Milestone: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/milestone/5
+
+# [v1.2.0]
+
+## API Changes
+
+### FSFW Architecture
+
+- New src folder which contains all source files except the HAL, contributed code and test code
+- External and internal API mostly stayed the same
+- Folder names are now all smaller case: internalError was renamed to internalerror and
+  FreeRTOS was renamed to freertos
+- Warning if optional headers are used but the modules was not added to the source files to compile
+
+### HAL
+
+- HAL added back into FSFW. It is tightly bound to the FSFW, and compiling it as a static library
+  made using it more complicated than necessary
+
+## Bugfixes
+
+### FreeRTOS QueueMapManager
+
+- Fixed a bug which causes the first generated Queue ID to be invalid
+
+## Enhancements
+
+### FSFW Architecture
+
+- See API changes chapter. This change will keep the internal API consistent in the future
+
+# [v1.1.0]
+
+## API Changes
+
+### PUS
+
+- Added PUS C support
+- SUBSYSTEM_IDs added for PUS Services
+- Added new Parameter which must be defined in config: fsfwconfig::FSFW_MAX_TM_PACKET_SIZE
+
+### ObjectManager
+
+ - ObjectManager is now a singelton
+
+
+### Configuration
+
+- Additional configuration option fsfwconfig::FSFW_MAX_TM_PACKET_SIZE which 
+  need to be specified in FSFWConfig.h
+
+### CMake
+
+- Changed Cmake FSFW_ADDITIONAL_INC_PATH to FSFW_ADDITIONAL_INC_PATHS
+
+## Bugfixes 
+
+- timemanager/TimeStamperIF.h: Timestamp config was not used correctly, leading to different timestamp sizes than configured in fsfwconfig::FSFW_MISSION_TIMESTAMP_SIZE
+- TCP server fixes
+
+## Enhancements
+
+### FreeRTOS Queue Handles
+
+- Fixed an internal issue how FreeRTOS MessageQueues were handled
+
+### Linux OSAL
+
+- Better printf error messages
+
+### CMake
+
+- Check for C++11 as mininimum required Version
+
+### Debug Output
+
+- Changed Warning color to magenta, which is well readable on both dark and light mode IDEs
+
+
+# Changes from ASTP 0.0.1 to 1.0.0
+
+### Host OSAL
+
+- Bugfix in MessageQueue, which caused the sender not to be set properly
+
+### FreeRTOS OSAL
+
+- vRequestContextSwitchFromISR is declared extern "C" so it can be defined in
+a C file without issues
+
+### PUS Services
+
+- It is now possible to change the message queue depth for the telecommand verification service (PUS1)
+- The same is possible for the event reporting service (PUS5)
+- PUS Health Service added, which allows to command and retrieve health via PUS packets
+
+
+### EnhancedControllerBase
+
+- New base class for a controller which also implements HasActionsIF and HasLocalDataPoolIF
+
+### Local Pool
+
+- Interface of LocalPools has changed. LocalPool is not a template anymore. Instead the size and
+bucket number of the pools per page and the number of pages are passed to the ctor instead of
+two ctor arguments and a template parameter
+
+### Parameter Service
+
+- The API of the parameter service has been changed to prevent inconsistencies
+between documentation and actual code and to clarify usage.
+- The parameter ID now consists of:
+	1. Domain ID (1 byte)
+	2. Unique Identifier (1 byte)
+	3. Linear Index (2 bytes)
+The linear index can be used for arrays as well as matrices.
+The parameter load command now explicitely expects the ECSS PTC and PFC
+information as well as  the rows and column number. Rows and column will
+default to one, which is equivalent to one scalar parameter (the most
+important use-case)
+   
+### File System Interface
+
+- A new interfaces specifies the functions for a software object which exposes the file system of
+a given hardware to use message based file handling (e.g. PUS commanding)
+
+### Internal Error Reporter
+
+- The new internal error reporter uses the local data pools. The pool IDs for
+the exisiting three error values and the new error set will be hardcoded for
+now, the the constructor for the internal error reporter just takes an object
+ID for now.
+
+### Device Handler Base
+
+- There is an additional `PERFORM_OPERATION` step for the device handler base. It is important
+that DHB users adapt their polling sequence tables to perform this step. This steps allows for 
+a clear distinction between operation and communication steps
+- setNormalDatapoolEntriesInvalid is not an abstract method and a default implementation was provided
+- getTransitionDelayMs is now an abstract method
+
+### DeviceHandlerIF
+
+- Typo for UNKNOWN_DEVICE_REPLY 
+
+### Events
+
+- makeEvent function: Now takes three input parameters instead of two and
+allows setting a unique ID. Event.cpp source file removed, functions now
+defined in header directly. Namespaces renamed. Functions declared `constexpr`
+now
+
+### Commanding Service Base
+
+- CSB uses the new fsfwconfig::FSFW_CSB_FIFO_DEPTH variable to determine  the FIFO depth for each 
+CSB instance. This variable has to be set in the FSFWConfig.h file
+
+### Service Interface
+
+- Proper printf support contained in ServiceInterfacePrinter.h
+- CPP ostream support now optional (can reduce executable size by 150 - 250 kB)
+- Amalagated header which determines automatically which service interface to use depending on FSFWConfig.h configuration. 
+  Users can just use #include <fsfw/serviceinterface/ServiceInterface.h>
+- If CPP streams are excluded, sif:: calls won't work anymore and need to be replaced by their printf counterparts. 
+  For the fsfw, this can be done by checking the processor define FSFW_CPP_OSTREAM_ENABLED from FSFWConfig.h. 
+  For mission code, developers need to replace sif:: calls by the printf counterparts, but only if the CPP stream are excluded. 
+  If this is not the case, everything should work as usual.
+
+### ActionHelper and ActionMessage
+
+- ActionHelper finish function and ActionMessage::setCompletionReply now expects explicit 
+information whether to report a success or failure message instead of deriving it implicitely 
+from returnvalue
+
+### PUS Parameter Service 20
+
+Added PUS parameter service 20 (only custom subservices available).

CMakeLists.txt

@@ -1,11 +1,85 @@
 cmake_minimum_required(VERSION 3.13)
 
-set(FSFW_VERSION 2)
-set(FSFW_SUBVERSION 0)
-set(FSFW_REVISION 0)
+set(MSG_PREFIX "fsfw |")
 
 # Add the cmake folder so the FindSphinx module is found
-set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake" ${CMAKE_MODULE_PATH})
+list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
+list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake-modules/bilke")
+list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake-modules/rpavlik")
+
+##########################
+# Version file handling  #
+##########################
+
+set(FSFW_VERSION_MAJOR_IF_GIT_FAILS 4)
+set(FSFW_VERSION_MINOR_IF_GIT_FAILS 0)
+set(FSFW_VERSION_REVISION_IF_GIT_FAILS 0)
+
+set(FSFW_GIT_VER_HANDLING_OK FALSE)
+# Check whether we got any revision (which isn't
+# always the case, e.g. when someone downloaded a zip
+# file from Github instead of a checkout)
+message(STATUS "${MSG_PREFIX} Determining version information with git")
+include(FsfwHelpers)
+determine_version_with_git("--exclude" "docker_*")
+if(GIT_INFO)
+    set(FSFW_GIT_INFO ${GIT_INFO} CACHE STRING "Version information retrieved with git describe" FORCE)
+    list(GET FSFW_GIT_INFO 1 FSFW_VERSION_MAJOR)
+    list(GET FSFW_GIT_INFO 2 FSFW_VERSION_MINOR)
+    list(GET FSFW_GIT_INFO 3 FSFW_VERSION_REVISION)
+    list(GET FSFW_GIT_INFO 4 FSFW_VERSION_VCS_INFO)
+    if(NOT FSFW_VERSION_MAJOR)
+        set(FSFW_VERSION_MAJOR ${FSFW_VERSION_MAJOR_IF_GIT_FAILS})
+    endif()
+    if(NOT FSFW_VERSION_MINOR)
+        set(FSFW_VERSION_MINOR ${FSFW_VERSION_MINOR_IF_GIT_FAILS})
+    endif()
+    if(NOT FSFW_VERSION_REVISION)
+        set(FSFW_VERSION_REVISION ${FSFW_VERSION_REVISION_IF_GIT_FAILS})
+    endif()
+    set(FSFW_GIT_VER_HANDLING_OK TRUE)
+else()
+    set(FSFW_GIT_VER_HANDLING_OK FALSE)
+endif()
+
+if(NOT FSFW_GIT_VER_HANDLING_OK)
+    set(FSFW_VERSION_MAJOR ${FSFW_VERSION_MAJOR_IF_GIT_FAILS})
+    set(FSFW_VERSION_MINOR ${FSFW_VERSION_MINOR_IF_GIT_FAILS})
+    set(FSFW_VERSION_REVISION ${FSFW_VERSION_REVISION_IF_GIT_FAILS})
+    set(GIT_REV "N/A")
+    set(GIT_DIFF "")
+    set(GIT_BRANCH "N/A")
+endif()
+
+
+set(LIB_FSFW_NAME fsfw)
+project(${LIB_FSFW_NAME} VERSION ${FSFW_VERSION_MAJOR}.${FSFW_VERSION_MINOR}.${FSFW_VERSION_REVISION})
+
+if(NOT CMAKE_CXX_STANDARD)
+    set(CMAKE_CXX_STANDARD 17)
+    set(CMAKE_CXX_STANDARD_REQUIRED True)
+elseif(${CMAKE_CXX_STANDARD} LESS 17)
+    message(FATAL_ERROR "${MSG_PREFIX} Compiling the FSFW requires a minimum of C++17 support")
+endif()
+
+set(FSFW_SOURCES_DIR "${CMAKE_SOURCE_DIR}/src/fsfw")
+
+set(FSFW_ETL_LIB_MAJOR_VERSION 20 CACHE STRING
+    "ETL library major version requirement"
+)
+set(FSFW_ETL_LIB_VERSION ${FSFW_ETL_LIB_MAJOR_VERSION}.27.3 CACHE STRING
+    "ETL library exact version requirement"
+)
+set(FSFW_ETL_LINK_TARGET etl::etl)
+
+set(FSFW_CATCH2_LIB_MAJOR_VERSION 3 CACHE STRING
+    "Catch2 library major version requirement"
+)
+set(FSFW_CATCH2_LIB_VERSION v${FSFW_CATCH2_LIB_MAJOR_VERSION}.0.0-preview5 CACHE STRING
+    "Catch2 library exact version requirement"
+)
+
+set(FSFW_ETL_LIB_NAME etl)
 
 option(FSFW_GENERATE_SECTIONS
     "Generate function and data sections. Required to remove unused code" ON
@@ -38,28 +112,29 @@ option(FSFW_ADD_TMSTORAGE "Compile with tm storage components" OFF)
 # Contrib sources
 option(FSFW_ADD_SGP4_PROPAGATOR "Add SGP4 propagator code" OFF)
 
-set(LIB_FSFW_NAME fsfw)
+
 set(FSFW_TEST_TGT fsfw-tests)
 set(FSFW_DUMMY_TGT fsfw-dummy)
 
-project(${LIB_FSFW_NAME})
 add_library(${LIB_FSFW_NAME})
 
+
 if(FSFW_BUILD_UNITTESTS)
-    message(STATUS "Building the FSFW unittests in addition to the static library")
+    message(STATUS "${MSG_PREFIX} Building the FSFW unittests in addition to the static library")
     # Check whether the user has already installed Catch2 first
-    find_package(Catch2 3)
+    find_package(Catch2 ${FSFW_CATCH2_LIB_MAJOR_VERSION})
     # Not installed, so use FetchContent to download and provide Catch2
     if(NOT Catch2_FOUND)
+        message(STATUS "${MSG_PREFIX} Catch2 installation not found. Downloading Catch2 library with FetchContent")
         include(FetchContent)
 
         FetchContent_Declare(
             Catch2
             GIT_REPOSITORY https://github.com/catchorg/Catch2.git
-            GIT_TAG        v3.0.0-preview4
+            GIT_TAG        ${FSFW_CATCH2_LIB_VERSION}
         )
 
-        FetchContent_MakeAvailable(Catch2)
+        list(APPEND FSFW_FETCH_CONTENT_TARGETS Catch2)
     endif()
 
     set(FSFW_CONFIG_PATH tests/src/fsfw_tests/unit/testcfg)
@@ -70,22 +145,51 @@ if(FSFW_BUILD_UNITTESTS)
     add_executable(${FSFW_TEST_TGT})
 
     if(FSFW_TESTS_GEN_COV)
-        message(STATUS "Generating coverage data for the library")
-        message(STATUS "Targets linking against ${LIB_FSFW_NAME} "
+        message(STATUS "${MSG_PREFIX} Generating coverage data for the library")
+        message(STATUS "${MSG_PREFIX} Targets linking against ${LIB_FSFW_NAME} "
             "will be compiled with coverage data as well"
         )
-        include(FetchContent)
-        FetchContent_Declare(
-            cmake-modules
-            GIT_REPOSITORY https://github.com/bilke/cmake-modules.git
-        )
-        FetchContent_MakeAvailable(cmake-modules)
         set(CMAKE_BUILD_TYPE "Debug")
-        list(APPEND CMAKE_MODULE_PATH ${cmake-modules_SOURCE_DIR})
         include(CodeCoverage)
     endif()
 endif()
 
+message(STATUS "${MSG_PREFIX} Finding and/or providing ETL library")
+
+# Check whether the user has already installed ETL first
+find_package(${FSFW_ETL_LIB_NAME} ${FSFW_ETL_LIB_MAJOR_VERSION} QUIET)
+# Not installed, so use FetchContent to download and provide etl
+if(NOT ${FSFW_ETL_LIB_NAME}_FOUND)
+    message(STATUS
+        "No ETL installation was found with find_package. Installing and providing "
+        "etl with FindPackage"
+    )
+    include(FetchContent)
+
+    FetchContent_Declare(
+        ${FSFW_ETL_LIB_NAME}
+        GIT_REPOSITORY https://github.com/ETLCPP/etl
+        GIT_TAG        ${FSFW_ETL_LIB_VERSION}
+    )
+
+    list(APPEND FSFW_FETCH_CONTENT_TARGETS ${FSFW_ETL_LIB_NAME})
+endif()
+
+# The documentation for FetchContent recommends declaring all the dependencies
+# before making them available. We make all declared dependency available here
+# after their declaration
+if(FSFW_FETCH_CONTENT_TARGETS)
+    FetchContent_MakeAvailable(${FSFW_FETCH_CONTENT_TARGETS})
+    if(TARGET ${FSFW_ETL_LIB_NAME})
+        add_library(${FSFW_ETL_LINK_TARGET} ALIAS ${FSFW_ETL_LIB_NAME})
+    endif()
+    if(TARGET Catch2)
+        # Fixes regression -preview4, to be confirmed in later releases
+        # Related GitHub issue: https://github.com/catchorg/Catch2/issues/2417
+        set_target_properties(Catch2 PROPERTIES DEBUG_POSTFIX "")
+    endif()
+endif()
+
 set(FSFW_CORE_INC_PATH "inc")
 
 set_property(CACHE FSFW_OSAL PROPERTY STRINGS host linux rtems freertos)
@@ -98,21 +202,14 @@ target_include_directories(${LIB_FSFW_NAME} INTERFACE
     ${CMAKE_CURRENT_BINARY_DIR}
 )
 
-if(NOT CMAKE_CXX_STANDARD)
-    set(CMAKE_CXX_STANDARD 11)
-    set(CMAKE_CXX_STANDARD_REQUIRED True)
-elseif(${CMAKE_CXX_STANDARD} LESS 11)
-    message(FATAL_ERROR "Compiling the FSFW requires a minimum of C++11 support")
-endif()
-
 # Backwards comptability
 if(OS_FSFW AND NOT FSFW_OSAL)
-    message(WARNING "Please pass the FSFW OSAL as FSFW_OSAL instead of OS_FSFW")
+    message(WARNING "${MSG_PREFIX} Please pass the FSFW OSAL as FSFW_OSAL instead of OS_FSFW")
     set(FSFW_OSAL OS_FSFW)
 endif()
 
 if(NOT FSFW_OSAL)
-	message(STATUS "No OS for FSFW via FSFW_OSAL set. Assuming host OS")
+	message(STATUS "${MSG_PREFIX} No OS for FSFW via FSFW_OSAL set. Assuming host OS")
 	# Assume host OS and autodetermine from OS_FSFW
 	if(UNIX)
 		set(FSFW_OSAL  "linux" 
@@ -146,16 +243,16 @@ elseif(FSFW_OSAL STREQUAL rtems)
     set(FSFW_OSAL_RTEMS ON)
 else()
     message(WARNING
-        "Invalid operating system for FSFW specified! Setting to host.."
+        "${MSG_PREFIX} Invalid operating system for FSFW specified! Setting to host.."
     )
     set(FSFW_OS_NAME "Host")
     set(OS_FSFW "host")
 endif()
 
 configure_file(src/fsfw/FSFW.h.in fsfw/FSFW.h)
-configure_file(src/fsfw/FSFWVersion.h.in fsfw/FSFWVersion.h)
+# configure_file(src/fsfw/FSFWVersion.h.in fsfw/FSFWVersion.h)
 
-message(STATUS "Compiling FSFW for the ${FSFW_OS_NAME} operating system.")
+message(STATUS "${MSG_PREFIX} Compiling FSFW for the ${FSFW_OS_NAME} operating system")
 
 add_subdirectory(src)
 add_subdirectory(tests)
@@ -239,8 +336,8 @@ endif()
 if(NOT FSFW_CONFIG_PATH)
     set(DEF_CONF_PATH misc/defaultcfg/fsfwconfig)
     if(NOT FSFW_BUILD_DOCS)
-        message(WARNING "Flight Software Framework configuration path not set!")
-        message(WARNING "Setting default configuration from ${DEF_CONF_PATH} ..")
+        message(WARNING "${MSG_PREFIX} Flight Software Framework configuration path not set")
+        message(WARNING "${MSG_PREFIX} Setting default configuration from ${DEF_CONF_PATH} ..")
     endif()
     add_subdirectory(${DEF_CONF_PATH})
     set(FSFW_CONFIG_PATH ${DEF_CONF_PATH})
@@ -279,6 +376,24 @@ if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
 		  -Wimplicit-fallthrough=1
 		  -Wno-unused-parameter
 		  -Wno-psabi
+          -Wduplicated-cond # check for duplicate conditions
+          -Wduplicated-branches # check for duplicate branches
+          -Wlogical-op # Search for bitwise operations instead of logical 
+          -Wnull-dereference # Search for NULL dereference
+          -Wundef # Warn if undefind marcos are used
+          -Wformat=2 # Format string problem detection
+          -Wformat-overflow=2 # Formatting issues in printf
+          -Wformat-truncation=2 # Formatting issues in printf
+          -Wformat-security # Search for dangerous printf operations
+          -Wstrict-overflow=3 # Warn if integer overflows might happen
+          -Warray-bounds=2 # Some array bounds violations will be found
+          -Wshift-overflow=2 # Search for bit left shift overflows (<c++14)
+          -Wcast-qual # Warn if the constness is cast away
+          -Wstringop-overflow=4
+          # -Wstack-protector # Emits a few false positives for low level access
+          # -Wconversion # Creates many false positives
+          # -Warith-conversion # Use with Wconversion to find more implicit conversions
+          # -fanalyzer # Should be used to look through problems
         )
     endif()
 
@@ -329,6 +444,7 @@ target_compile_options(${LIB_FSFW_NAME} PRIVATE
 )
 
 target_link_libraries(${LIB_FSFW_NAME} PRIVATE
+    ${FSFW_ETL_LINK_TARGET}
     ${FSFW_ADDITIONAL_LINK_LIBS}
 )
 
@@ -344,3 +460,18 @@ add_custom_command(
    POST_BUILD
    COMMENT ${POST_BUILD_COMMENT}
 )
+
+# Add a custom command that produces version.cpp, plus
+# a dummy output that's not actually produced, in order
+# to force version.cmake to always be re-run before the build
+add_custom_command(
+    TARGET ${LIB_FSFW_NAME}
+    COMMAND ${CMAKE_COMMAND} -DVERSION_DIR=${FSFW_SOURCES_DIR}
+            -DVERSION_MAJOR=${FSFW_VERSION_MAJOR}
+            -DVERSION_MINOR=${FSFW_VERSION_MINOR}
+            -DVERSION_REVISION=${FSFW_VERSION_REVISION}
+            -DVERSION_VCS_INFO=${FSFW_VERSION_VCS_INFO}
+            -P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/version.cmake
+    BYPRODUCTS ${FSFW_SOURCES_DIR}/versionAutogen.cpp
+    COMMENT ""
+)

README.md

@@ -11,9 +11,15 @@ with Airbus Defence and Space GmbH.
 
 ## Quick facts
 
-The framework is designed for systems, which communicate with external devices, perform control loops, receive telecommands and send telemetry, and need to maintain a high level of availability. Therefore, a mode and health system provides control over the states of the software and the controlled devices. In addition, a simple mechanism of event based fault detection, isolation and recovery is implemented as well. 
+The framework is designed for systems, which communicate with external devices, perform control loops, 
+receive telecommands and send telemetry, and need to maintain a high level of availability. Therefore,
+a mode and health system provides control over the states of the software and the controlled devices.
+In addition, a simple mechanism of event based fault detection, isolation and recovery is implemented as well. 
 
-The FSFW provides abstraction layers for operating systems to provide a uniform operating system abstraction layer (OSAL). Some components of this OSAL are required internally by the FSFW but is also very useful for developers to implement the same application logic on different operating systems with a uniform interface.
+The FSFW provides abstraction layers for operating systems to provide a uniform operating system
+abstraction layer (OSAL). Some components of this OSAL are required internally by the FSFW but is
+also very useful for developers to implement the same application logic on different operating
+systems with a uniform interface.
 
 Currently, the FSFW provides the following OSALs:
 
@@ -45,6 +51,28 @@ A template configuration folder was provided and can be copied into the project
 a starting point. The [configuration section](docs/README-config.md#top) provides more specific 
 information about the possible options.
 
+## Prerequisites
+
+The Embedded Template Library (etl) is a dependency of the FSFW which is automatically
+installed and provided by the build system unless the correction version was installed.
+The current recommended version can be found inside the fsfw `CMakeLists.txt` file or by using
+`ccmake` and looking up the `FSFW_ETL_LIB_MAJOR_VERSION` variable.
+
+You can install the ETL library like this. On Linux, it might be necessary to add `sudo` before
+the install call:
+
+```cpp
+git clone https://github.com/ETLCPP/etl
+cd etl
+git checkout <currentRecommendedVersion>
+mkdir build && cd build
+cmake ..
+cmake --install .
+```
+
+It is recommended to install `20.27.2` or newer for the package version handling of
+ETL to work.
+
 ## Adding the library
 
 The following steps show how to add and use FSFW components. It is still recommended to
@@ -71,9 +99,9 @@ add and link against the FSFW library in general.
 
 4. Link against the FSFW library
 
-	```cmake
-	target_link_libraries(<YourProjectName> PRIVATE fsfw)
-	```
+   ```cmake
+   target_link_libraries(${YourProjectName} PRIVATE fsfw)
+   ```
 
 5. It should now be possible use the FSFW as a static library from the user code.
 
@@ -83,6 +111,19 @@ The FSFW also has unittests which use the [Catch2 library](https://github.com/ca
 These are built by setting the CMake option `FSFW_BUILD_UNITTESTS` to `ON` or `TRUE`
 from your project `CMakeLists.txt` file or from the command line.
 
+You can install the Catch2 library, which prevents the build system to avoid re-downloading
+the dependency if the unit tests are completely rebuilt. The current recommended version
+can be found inside the fsfw `CMakeLists.txt` file or by using `ccmake` and looking up
+the `FSFW_CATCH2_LIB_VERSION` variable.
+
+```sh
+git clone https://github.com/catchorg/Catch2.git
+cd Catch2
+git checkout <currentRecommendedVersion>
+cmake -Bbuild -H. -DBUILD_TESTING=OFF
+sudo cmake --build build/ --target install
+```
+
 The fsfw-tests binary will be built as part of the static library and dropped alongside it.
 If the unittests are built, the library and the tests will be built with coverage information by
 default. This can be disabled by setting the `FSFW_TESTS_COV_GEN` option to `OFF` or `FALSE`.
@@ -107,6 +148,42 @@ cmake --build . -- fsfw-tests_coverage -j
 
 The `coverage.py` script located in the `script` folder can also be used to do this conveniently.
 
+## Building the documentations
+
+The FSFW documentation is built using the tools Sphinx, doxygen and breathe based on the
+instructions provided in  [this blogpost](https://devblogs.microsoft.com/cppblog/clear-functional-c-documentation-with-sphinx-breathe-doxygen-cmake/). If you
+want to do this locally, set up the prerequisites first. This requires a ``python3``
+installation as well. Example here is for Ubuntu.
+
+```sh
+sudo apt-get install doxygen graphviz
+```
+
+And the following Python packages
+
+```sh
+python3 -m pip install sphinx breathe
+```
+
+You can set up a documentation build system using the following commands
+
+```sh
+mkdir build-docs && cd build-docs
+cmake -DFSFW_BUILD_DOCS=ON -DFSFW_OSAL=host ..
+```
+
+Then you can generate the documentation using
+
+```sh
+cmake --build . -j
+```
+
+You can find the generated documentation inside the `docs/sphinx` folder inside the build
+folder. Simply open the `index.html` in the webbrowser of your choice.
+
+The `helper.py` script located in the script` folder can also be used to create, build
+and open the documentation conveniently. Try `helper.py -h for more information.
+
 ## Formatting the sources
 
 The formatting is done by the `clang-format` tool. The configuration is contained within the

automation/Dockerfile

@@ -9,6 +9,6 @@ RUN apt-get --yes install gcc g++ cmake make lcov git valgrind nano iputils-ping
 
 RUN git clone https://github.com/catchorg/Catch2.git && \
 	cd Catch2 && \
-	git checkout v3.0.0-preview4 && \
+	git checkout v3.0.0-preview5 && \
 	cmake -Bbuild -H. -DBUILD_TESTING=OFF && \
 	cmake --build build/ --target install

automation/Jenkinsfile

@@ -3,13 +3,7 @@ pipeline {
         BUILDDIR = 'build-tests'
     }
     agent {
-        dockerfile {
-            dir 'automation'
-            //force docker to redownload base image and rebuild all steps instead of caching them
-            //this way, we always get an up to date docker image one each build
-            additionalBuildArgs  '--no-cache --pull'
-            reuseNode true
-        }
+        docker { image 'fsfw-ci:d2'}
     }
     stages {
         stage('Clean') {
@@ -27,14 +21,14 @@ pipeline {
         stage('Build') {
             steps {
                 dir(BUILDDIR) {
-                    sh 'cmake --build . -j'
+                    sh 'cmake --build . -j4'
                 }
             }
         }
         stage('Unittests') {
             steps {
                 dir(BUILDDIR) {
-                    sh 'cmake --build . -- fsfw-tests_coverage -j'
+                    sh 'cmake --build . -- fsfw-tests_coverage -j4'
                 }
             }
         }

cmake/FsfwHelpers.cmake

@@ -0,0 +1,32 @@
+# Determines the git version with git describe and returns it by setting
+# the GIT_INFO list in the parent scope. The list has the following entries
+# 1. Full version string
+# 2. Major version
+# 3. Minor version
+# 4. Revision
+# 5. git SHA hash and commits since tag
+function(determine_version_with_git)
+    include(GetGitRevisionDescription)
+    git_describe(VERSION ${ARGN})
+    get_git_head_revision(GIT_BRANCH HASH_VAR)
+    string(FIND ${VERSION} "." VALID_VERSION)
+    if(VALID_VERSION EQUAL -1)
+        message(WARNING "Version string ${VERSION} retrieved with git describe is invalid")
+        return()
+    endif()
+    # Parse the version information into pieces.
+    string(REGEX REPLACE "^v([0-9]+)\\..*" "\\1" _VERSION_MAJOR "${VERSION}")
+    string(REGEX REPLACE "^v[0-9]+\\.([0-9]+).*" "\\1" _VERSION_MINOR "${VERSION}")
+    string(REGEX REPLACE "^v[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" _VERSION_PATCH "${VERSION}")
+    string(REGEX REPLACE "^v[0-9]+\\.[0-9]+\\.[0-9]+-(.*)" "\\1" VERSION_SHA1 "${VERSION}")
+    string(STRIP "${GIT_BRANCH}" GIT_BRANCH)
+    set(GIT_INFO ${VERSION})
+    list(APPEND GIT_INFO ${_VERSION_MAJOR})
+    list(APPEND GIT_INFO ${_VERSION_MINOR})
+    list(APPEND GIT_INFO ${_VERSION_PATCH})
+    list(APPEND GIT_INFO ${VERSION_SHA1})
+    set(GIT_INFO ${GIT_INFO} PARENT_SCOPE)
+    set(GIT_BRANCH ${GIT_BRANCH} PARENT_SCOPE)
+    message(STATUS "${MSG_PREFIX} git branch ${GIT_BRANCH}")
+    message(STATUS "${MSG_PREFIX} Set git version info into GIT_INFO from the git tag ${VERSION}")
+endfunction()

cmake/cmake-modules/README.md

@@ -0,0 +1,7 @@
+The files in the `bilke` folder were manually copy and pasted from the
+[cmake-modules repository](https://github.com/bilke/cmake-modules). It was decided to do
+this because only a small subset of its provided functions are needed.
+
+The files in the `rpavlik` folder were manually copy and pasted from the
+[cmake-modules repository](https://github.com/rpavlik/cmake-modules). It was decided to do
+this because only a small subset of its provided functions are needed.

cmake/cmake-modules/bilke/CodeCoverage.cmake

@@ -0,0 +1,719 @@
+# Copyright (c) 2012 - 2017, Lars Bilke
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without
+#    specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# CHANGES:
+#
+# 2012-01-31, Lars Bilke
+# - Enable Code Coverage
+#
+# 2013-09-17, Joakim Söderberg
+# - Added support for Clang.
+# - Some additional usage instructions.
+#
+# 2016-02-03, Lars Bilke
+# - Refactored functions to use named parameters
+#
+# 2017-06-02, Lars Bilke
+# - Merged with modified version from github.com/ufz/ogs
+#
+# 2019-05-06, Anatolii Kurotych
+# - Remove unnecessary --coverage flag
+#
+# 2019-12-13, FeRD (Frank Dana)
+# - Deprecate COVERAGE_LCOVR_EXCLUDES and COVERAGE_GCOVR_EXCLUDES lists in favor
+#   of tool-agnostic COVERAGE_EXCLUDES variable, or EXCLUDE setup arguments.
+# - CMake 3.4+: All excludes can be specified relative to BASE_DIRECTORY
+# - All setup functions: accept BASE_DIRECTORY, EXCLUDE list
+# - Set lcov basedir with -b argument
+# - Add automatic --demangle-cpp in lcovr, if 'c++filt' is available (can be
+#   overridden with NO_DEMANGLE option in setup_target_for_coverage_lcovr().)
+# - Delete output dir, .info file on 'make clean'
+# - Remove Python detection, since version mismatches will break gcovr
+# - Minor cleanup (lowercase function names, update examples...)
+#
+# 2019-12-19, FeRD (Frank Dana)
+# - Rename Lcov outputs, make filtered file canonical, fix cleanup for targets
+#
+# 2020-01-19, Bob Apthorpe
+# - Added gfortran support
+#
+# 2020-02-17, FeRD (Frank Dana)
+# - Make all add_custom_target()s VERBATIM to auto-escape wildcard characters
+#   in EXCLUDEs, and remove manual escaping from gcovr targets
+#
+# 2021-01-19, Robin Mueller
+# - Add CODE_COVERAGE_VERBOSE option which will allow to print out commands which are run
+# - Added the option for users to set the GCOVR_ADDITIONAL_ARGS variable to supply additional
+#   flags to the gcovr command
+#
+# 2020-05-04, Mihchael Davis
+#     - Add -fprofile-abs-path to make gcno files contain absolute paths
+#     - Fix BASE_DIRECTORY not working when defined
+#     - Change BYPRODUCT from folder to index.html to stop ninja from complaining about double defines
+#
+# 2021-05-10, Martin Stump
+#     - Check if the generator is multi-config before warning about non-Debug builds
+#
+# 2022-02-22, Marko Wehle
+#     - Change gcovr output from -o <filename> for --xml <filename> and --html <filename> output respectively.
+#       This will allow for Multiple Output Formats at the same time by making use of GCOVR_ADDITIONAL_ARGS, e.g. GCOVR_ADDITIONAL_ARGS "--txt".
+#
+# USAGE:
+#
+# 1. Copy this file into your cmake modules path.
+#
+# 2. Add the following line to your CMakeLists.txt (best inside an if-condition
+#    using a CMake option() to enable it just optionally):
+#      include(CodeCoverage)
+#
+# 3. Append necessary compiler flags for all supported source files:
+#      append_coverage_compiler_flags()
+#    Or for specific target:
+#      append_coverage_compiler_flags_to_target(YOUR_TARGET_NAME)
+#
+# 3.a (OPTIONAL) Set appropriate optimization flags, e.g. -O0, -O1 or -Og
+#
+# 4. If you need to exclude additional directories from the report, specify them
+#    using full paths in the COVERAGE_EXCLUDES variable before calling
+#    setup_target_for_coverage_*().
+#    Example:
+#      set(COVERAGE_EXCLUDES
+#          '${PROJECT_SOURCE_DIR}/src/dir1/*'
+#          '/path/to/my/src/dir2/*')
+#    Or, use the EXCLUDE argument to setup_target_for_coverage_*().
+#    Example:
+#      setup_target_for_coverage_lcov(
+#          NAME coverage
+#          EXECUTABLE testrunner
+#          EXCLUDE "${PROJECT_SOURCE_DIR}/src/dir1/*" "/path/to/my/src/dir2/*")
+#
+# 4.a NOTE: With CMake 3.4+, COVERAGE_EXCLUDES or EXCLUDE can also be set
+#     relative to the BASE_DIRECTORY (default: PROJECT_SOURCE_DIR)
+#     Example:
+#       set(COVERAGE_EXCLUDES "dir1/*")
+#       setup_target_for_coverage_gcovr_html(
+#           NAME coverage
+#           EXECUTABLE testrunner
+#           BASE_DIRECTORY "${PROJECT_SOURCE_DIR}/src"
+#           EXCLUDE "dir2/*")
+#
+# 5. Use the functions described below to create a custom make target which
+#    runs your test executable and produces a code coverage report.
+#
+# 6. Build a Debug build:
+#      cmake -DCMAKE_BUILD_TYPE=Debug ..
+#      make
+#      make my_coverage_target
+#
+
+include(CMakeParseArguments)
+
+option(CODE_COVERAGE_VERBOSE "Verbose information" FALSE)
+
+# Check prereqs
+find_program( GCOV_PATH gcov )
+find_program( LCOV_PATH  NAMES lcov lcov.bat lcov.exe lcov.perl)
+find_program( FASTCOV_PATH NAMES fastcov fastcov.py )
+find_program( GENHTML_PATH NAMES genhtml genhtml.perl genhtml.bat )
+find_program( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/scripts/test)
+find_program( CPPFILT_PATH NAMES c++filt )
+
+if(NOT GCOV_PATH)
+    message(FATAL_ERROR "gcov not found! Aborting...")
+endif() # NOT GCOV_PATH
+
+get_property(LANGUAGES GLOBAL PROPERTY ENABLED_LANGUAGES)
+list(GET LANGUAGES 0 LANG)
+
+if("${CMAKE_${LANG}_COMPILER_ID}" MATCHES "(Apple)?[Cc]lang")
+    if("${CMAKE_${LANG}_COMPILER_VERSION}" VERSION_LESS 3)
+        message(FATAL_ERROR "Clang version must be 3.0.0 or greater! Aborting...")
+    endif()
+elseif(NOT CMAKE_COMPILER_IS_GNUCXX)
+    if("${CMAKE_Fortran_COMPILER_ID}" MATCHES "[Ff]lang")
+        # Do nothing; exit conditional without error if true
+    elseif("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
+        # Do nothing; exit conditional without error if true
+    else()
+        message(FATAL_ERROR "Compiler is not GNU gcc! Aborting...")
+    endif()
+endif()
+
+set(COVERAGE_COMPILER_FLAGS "-g -fprofile-arcs -ftest-coverage"
+    CACHE INTERNAL "")
+if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
+    include(CheckCXXCompilerFlag)
+    check_cxx_compiler_flag(-fprofile-abs-path HAVE_fprofile_abs_path)
+    if(HAVE_fprofile_abs_path)
+        set(COVERAGE_COMPILER_FLAGS "${COVERAGE_COMPILER_FLAGS} -fprofile-abs-path")
+    endif()
+endif()
+
+set(CMAKE_Fortran_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the Fortran compiler during coverage builds."
+    FORCE )
+set(CMAKE_CXX_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C++ compiler during coverage builds."
+    FORCE )
+set(CMAKE_C_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C compiler during coverage builds."
+    FORCE )
+set(CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used for linking binaries during coverage builds."
+    FORCE )
+set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used by the shared libraries linker during coverage builds."
+    FORCE )
+mark_as_advanced(
+    CMAKE_Fortran_FLAGS_COVERAGE
+    CMAKE_CXX_FLAGS_COVERAGE
+    CMAKE_C_FLAGS_COVERAGE
+    CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
+
+get_property(GENERATOR_IS_MULTI_CONFIG GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
+if(NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG))
+    message(WARNING "Code coverage results with an optimised (non-Debug) build may be misleading")
+endif() # NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG)
+
+if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_Fortran_COMPILER_ID STREQUAL "GNU")
+    link_libraries(gcov)
+endif()
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_lcov(
+#     NAME testrunner_coverage                    # New target name
+#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES testrunner                     # Dependencies to build first
+#     BASE_DIRECTORY "../"                        # Base directory for report
+#                                                 #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"           # Patterns to exclude (can be relative
+#                                                 #  to BASE_DIRECTORY, with CMake 3.4+)
+#     NO_DEMANGLE                                 # Don't demangle C++ symbols
+#                                                 #  even if c++filt is found
+# )
+function(setup_target_for_coverage_lcov)
+
+    set(options NO_DEMANGLE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES LCOV_ARGS GENHTML_ARGS)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT LCOV_PATH)
+        message(FATAL_ERROR "lcov not found! Aborting...")
+    endif() # NOT LCOV_PATH
+
+    if(NOT GENHTML_PATH)
+        message(FATAL_ERROR "genhtml not found! Aborting...")
+    endif() # NOT GENHTML_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(LCOV_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_LCOV_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND LCOV_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES LCOV_EXCLUDES)
+
+    # Conditional arguments
+    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
+      set(GENHTML_EXTRA_ARGS "--demangle-cpp")
+    endif()
+     
+    # Setting up commands which will be run to generate coverage data.
+    # Cleanup lcov
+    set(LCOV_CLEAN_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -directory . 
+        -b ${BASEDIR} --zerocounters
+    )
+    # Create baseline to make sure untouched files show up in the report
+    set(LCOV_BASELINE_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -c -i -d . -b 
+        ${BASEDIR} -o ${Coverage_NAME}.base
+    )
+    # Run tests
+    set(LCOV_EXEC_TESTS_CMD 
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )    
+    # Capturing lcov counters and generating report
+    set(LCOV_CAPTURE_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --directory . -b 
+        ${BASEDIR} --capture --output-file ${Coverage_NAME}.capture
+    )
+    # add baseline counters
+    set(LCOV_BASELINE_COUNT_CMD
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -a ${Coverage_NAME}.base 
+        -a ${Coverage_NAME}.capture --output-file ${Coverage_NAME}.total
+    ) 
+    # filter collected data to final coverage report
+    set(LCOV_FILTER_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --remove 
+        ${Coverage_NAME}.total ${LCOV_EXCLUDES} --output-file ${Coverage_NAME}.info
+    )    
+    # Generate HTML output
+    set(LCOV_GEN_HTML_CMD
+        ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS} -o 
+        ${Coverage_NAME} ${Coverage_NAME}.info
+    )
+    
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+        message(STATUS "Command to clean up lcov: ")
+        string(REPLACE ";" " " LCOV_CLEAN_CMD_SPACED "${LCOV_CLEAN_CMD}")
+        message(STATUS "${LCOV_CLEAN_CMD_SPACED}")
+
+        message(STATUS "Command to create baseline: ")
+        string(REPLACE ";" " " LCOV_BASELINE_CMD_SPACED "${LCOV_BASELINE_CMD}")
+        message(STATUS "${LCOV_BASELINE_CMD_SPACED}")
+
+        message(STATUS "Command to run the tests: ")
+        string(REPLACE ";" " " LCOV_EXEC_TESTS_CMD_SPACED "${LCOV_EXEC_TESTS_CMD}")
+        message(STATUS "${LCOV_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to capture counters and generate report: ")
+        string(REPLACE ";" " " LCOV_CAPTURE_CMD_SPACED "${LCOV_CAPTURE_CMD}")
+        message(STATUS "${LCOV_CAPTURE_CMD_SPACED}")
+
+        message(STATUS "Command to add baseline counters: ")
+        string(REPLACE ";" " " LCOV_BASELINE_COUNT_CMD_SPACED "${LCOV_BASELINE_COUNT_CMD}")
+        message(STATUS "${LCOV_BASELINE_COUNT_CMD_SPACED}")
+
+        message(STATUS "Command to filter collected data: ")
+        string(REPLACE ";" " " LCOV_FILTER_CMD_SPACED "${LCOV_FILTER_CMD}")
+        message(STATUS "${LCOV_FILTER_CMD_SPACED}")
+
+        message(STATUS "Command to generate lcov HTML output: ")
+        string(REPLACE ";" " " LCOV_GEN_HTML_CMD_SPACED "${LCOV_GEN_HTML_CMD}")
+        message(STATUS "${LCOV_GEN_HTML_CMD_SPACED}")
+    endif()
+
+    # Setup target
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${LCOV_CLEAN_CMD}
+        COMMAND ${LCOV_BASELINE_CMD} 
+        COMMAND ${LCOV_EXEC_TESTS_CMD}
+        COMMAND ${LCOV_CAPTURE_CMD}
+        COMMAND ${LCOV_BASELINE_COUNT_CMD}
+        COMMAND ${LCOV_FILTER_CMD} 
+        COMMAND ${LCOV_GEN_HTML_CMD}
+
+        # Set output files as GENERATED (will be removed on 'make clean')
+        BYPRODUCTS
+            ${Coverage_NAME}.base
+            ${Coverage_NAME}.capture
+            ${Coverage_NAME}.total
+            ${Coverage_NAME}.info
+            ${Coverage_NAME}/index.html
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
+    )
+
+    # Show where to find the lcov info report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Lcov code coverage info report saved in ${Coverage_NAME}.info."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
+    )
+
+endfunction() # setup_target_for_coverage_lcov
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_gcovr_xml(
+#     NAME ctest_coverage                    # New target name
+#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES executable_target         # Dependencies to build first
+#     BASE_DIRECTORY "../"                   # Base directory for report
+#                                            #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
+#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
+# )
+# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
+# GCVOR command.
+function(setup_target_for_coverage_gcovr_xml)
+
+    set(options NONE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT GCOVR_PATH)
+        message(FATAL_ERROR "gcovr not found! Aborting...")
+    endif() # NOT GCOVR_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(GCOVR_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
+
+    # Combine excludes to several -e arguments
+    set(GCOVR_EXCLUDE_ARGS "")
+    foreach(EXCLUDE ${GCOVR_EXCLUDES})
+        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
+        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
+    endforeach()
+    
+    # Set up commands which will be run to generate coverage data
+    # Run tests
+    set(GCOVR_XML_EXEC_TESTS_CMD
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )
+    # Running gcovr
+    set(GCOVR_XML_CMD
+        ${GCOVR_PATH} --xml ${Coverage_NAME}.xml -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
+        ${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
+    )
+    
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+
+        message(STATUS "Command to run tests: ")
+        string(REPLACE ";" " " GCOVR_XML_EXEC_TESTS_CMD_SPACED "${GCOVR_XML_EXEC_TESTS_CMD}")
+        message(STATUS "${GCOVR_XML_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to generate gcovr XML coverage data: ")
+        string(REPLACE ";" " " GCOVR_XML_CMD_SPACED "${GCOVR_XML_CMD}")
+        message(STATUS "${GCOVR_XML_CMD_SPACED}")
+    endif()
+
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${GCOVR_XML_EXEC_TESTS_CMD}
+        COMMAND ${GCOVR_XML_CMD}
+        
+        BYPRODUCTS ${Coverage_NAME}.xml
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Running gcovr to produce Cobertura code coverage report."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Cobertura code coverage report saved in ${Coverage_NAME}.xml."
+    )
+endfunction() # setup_target_for_coverage_gcovr_xml
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_gcovr_html(
+#     NAME ctest_coverage                    # New target name
+#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES executable_target         # Dependencies to build first
+#     BASE_DIRECTORY "../"                   # Base directory for report
+#                                            #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
+#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
+# )
+# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
+# GCVOR command.
+function(setup_target_for_coverage_gcovr_html)
+
+    set(options NONE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT GCOVR_PATH)
+        message(FATAL_ERROR "gcovr not found! Aborting...")
+    endif() # NOT GCOVR_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(GCOVR_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
+
+    # Combine excludes to several -e arguments
+    set(GCOVR_EXCLUDE_ARGS "")
+    foreach(EXCLUDE ${GCOVR_EXCLUDES})
+        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
+        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
+    endforeach()
+
+    # Set up commands which will be run to generate coverage data
+    # Run tests
+    set(GCOVR_HTML_EXEC_TESTS_CMD
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )
+    # Create folder
+    set(GCOVR_HTML_FOLDER_CMD
+        ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/${Coverage_NAME}
+    )
+    # Running gcovr
+    set(GCOVR_HTML_CMD
+        ${GCOVR_PATH} --html ${Coverage_NAME}/index.html --html-details -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
+        ${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
+    )
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+
+        message(STATUS "Command to run tests: ")
+        string(REPLACE ";" " " GCOVR_HTML_EXEC_TESTS_CMD_SPACED "${GCOVR_HTML_EXEC_TESTS_CMD}")
+        message(STATUS "${GCOVR_HTML_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to create a folder: ")
+        string(REPLACE ";" " " GCOVR_HTML_FOLDER_CMD_SPACED "${GCOVR_HTML_FOLDER_CMD}")
+        message(STATUS "${GCOVR_HTML_FOLDER_CMD_SPACED}")
+
+        message(STATUS "Command to generate gcovr HTML coverage data: ")
+        string(REPLACE ";" " " GCOVR_HTML_CMD_SPACED "${GCOVR_HTML_CMD}")
+        message(STATUS "${GCOVR_HTML_CMD_SPACED}")
+    endif()
+
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${GCOVR_HTML_EXEC_TESTS_CMD}
+        COMMAND ${GCOVR_HTML_FOLDER_CMD}
+        COMMAND ${GCOVR_HTML_CMD}
+
+        BYPRODUCTS ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html  # report directory
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Running gcovr to produce HTML code coverage report."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
+    )
+
+endfunction() # setup_target_for_coverage_gcovr_html
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_fastcov(
+#     NAME testrunner_coverage                    # New target name
+#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES testrunner                     # Dependencies to build first
+#     BASE_DIRECTORY "../"                        # Base directory for report
+#                                                 #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/" "src/dir2/"             # Patterns to exclude.
+#     NO_DEMANGLE                                 # Don't demangle C++ symbols
+#                                                 #  even if c++filt is found
+#     SKIP_HTML                                   # Don't create html report
+#     POST_CMD perl -i -pe s!${PROJECT_SOURCE_DIR}/!!g ctest_coverage.json  # E.g. for stripping source dir from file paths
+# )
+function(setup_target_for_coverage_fastcov)
+
+    set(options NO_DEMANGLE SKIP_HTML)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES FASTCOV_ARGS GENHTML_ARGS POST_CMD)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT FASTCOV_PATH)
+        message(FATAL_ERROR "fastcov not found! Aborting...")
+    endif()
+
+    if(NOT Coverage_SKIP_HTML AND NOT GENHTML_PATH)
+        message(FATAL_ERROR "genhtml not found! Aborting...")
+    endif()
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (Patterns, not paths, for fastcov)
+    set(FASTCOV_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_FASTCOV_EXCLUDES})
+        list(APPEND FASTCOV_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES FASTCOV_EXCLUDES)
+
+    # Conditional arguments
+    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
+        set(GENHTML_EXTRA_ARGS "--demangle-cpp")
+    endif()
+
+    # Set up commands which will be run to generate coverage data
+    set(FASTCOV_EXEC_TESTS_CMD ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS})
+
+    set(FASTCOV_CAPTURE_CMD ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
+        --search-directory ${BASEDIR}
+        --process-gcno
+        --output ${Coverage_NAME}.json
+        --exclude ${FASTCOV_EXCLUDES}
+        --exclude ${FASTCOV_EXCLUDES}
+    )
+    
+    set(FASTCOV_CONVERT_CMD ${FASTCOV_PATH}
+        -C ${Coverage_NAME}.json --lcov --output ${Coverage_NAME}.info
+    )
+
+    if(Coverage_SKIP_HTML)
+        set(FASTCOV_HTML_CMD ";")
+    else()
+        set(FASTCOV_HTML_CMD ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS}
+            -o ${Coverage_NAME} ${Coverage_NAME}.info
+        )
+    endif()
+
+    set(FASTCOV_POST_CMD ";")
+    if(Coverage_POST_CMD)
+        set(FASTCOV_POST_CMD ${Coverage_POST_CMD})
+    endif()
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Code coverage commands for target ${Coverage_NAME} (fastcov):")
+
+        message("   Running tests:")
+        string(REPLACE ";" " " FASTCOV_EXEC_TESTS_CMD_SPACED "${FASTCOV_EXEC_TESTS_CMD}")
+        message("     ${FASTCOV_EXEC_TESTS_CMD_SPACED}")
+
+        message("   Capturing fastcov counters and generating report:")
+        string(REPLACE ";" " " FASTCOV_CAPTURE_CMD_SPACED "${FASTCOV_CAPTURE_CMD}")
+        message("     ${FASTCOV_CAPTURE_CMD_SPACED}")
+
+        message("   Converting fastcov .json to lcov .info:")
+        string(REPLACE ";" " " FASTCOV_CONVERT_CMD_SPACED "${FASTCOV_CONVERT_CMD}")
+        message("     ${FASTCOV_CONVERT_CMD_SPACED}")
+
+        if(NOT Coverage_SKIP_HTML)
+            message("   Generating HTML report: ")
+            string(REPLACE ";" " " FASTCOV_HTML_CMD_SPACED "${FASTCOV_HTML_CMD}")
+            message("     ${FASTCOV_HTML_CMD_SPACED}")
+        endif()
+        if(Coverage_POST_CMD)
+            message("   Running post command: ")
+            string(REPLACE ";" " " FASTCOV_POST_CMD_SPACED "${FASTCOV_POST_CMD}")
+            message("     ${FASTCOV_POST_CMD_SPACED}")
+        endif()
+    endif()
+
+    # Setup target
+    add_custom_target(${Coverage_NAME}
+
+        # Cleanup fastcov
+        COMMAND ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
+            --search-directory ${BASEDIR}
+            --zerocounters
+
+        COMMAND ${FASTCOV_EXEC_TESTS_CMD}
+        COMMAND ${FASTCOV_CAPTURE_CMD}
+        COMMAND ${FASTCOV_CONVERT_CMD}
+        COMMAND ${FASTCOV_HTML_CMD}
+        COMMAND ${FASTCOV_POST_CMD}
+
+        # Set output files as GENERATED (will be removed on 'make clean')
+        BYPRODUCTS
+             ${Coverage_NAME}.info
+             ${Coverage_NAME}.json
+             ${Coverage_NAME}/index.html  # report directory
+
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Resetting code coverage counters to zero. Processing code coverage counters and generating report."
+    )
+
+    set(INFO_MSG "fastcov code coverage info report saved in ${Coverage_NAME}.info and ${Coverage_NAME}.json.")
+    if(NOT Coverage_SKIP_HTML)
+        string(APPEND INFO_MSG " Open ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html in your browser to view the coverage report.")
+    endif()
+    # Show where to find the fastcov info report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E echo ${INFO_MSG}
+    )
+
+endfunction() # setup_target_for_coverage_fastcov
+
+function(append_coverage_compiler_flags)
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    message(STATUS "Appending code coverage compiler flags: ${COVERAGE_COMPILER_FLAGS}")
+endfunction() # append_coverage_compiler_flags
+
+# Setup coverage for specific library
+function(append_coverage_compiler_flags_to_target name)
+    target_compile_options(${name}
+        PRIVATE ${COVERAGE_COMPILER_FLAGS})
+endfunction()

cmake/cmake-modules/bilke/LICENSE_1_0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

cmake/cmake-modules/rpavlik/GetGitRevisionDescription.cmake

@@ -0,0 +1,284 @@
+# - Returns a version string from Git
+#
+# These functions force a re-configure on each git commit so that you can
+# trust the values of the variables in your build system.
+#
+#  get_git_head_revision(<refspecvar> <hashvar> [ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR])
+#
+# Returns the refspec and sha hash of the current head revision
+#
+#  git_describe(<var> [<additional arguments to git describe> ...])
+#
+# Returns the results of git describe on the source tree, and adjusting
+# the output so that it tests false if an error occurs.
+#
+#  git_describe_working_tree(<var> [<additional arguments to git describe> ...])
+#
+# Returns the results of git describe on the working tree (--dirty option),
+# and adjusting the output so that it tests false if an error occurs.
+#
+#  git_get_exact_tag(<var> [<additional arguments to git describe> ...])
+#
+# Returns the results of git describe --exact-match on the source tree,
+# and adjusting the output so that it tests false if there was no exact
+# matching tag.
+#
+#  git_local_changes(<var>)
+#
+# Returns either "CLEAN" or "DIRTY" with respect to uncommitted changes.
+# Uses the return code of "git diff-index --quiet HEAD --".
+# Does not regard untracked files.
+#
+# Requires CMake 2.6 or newer (uses the 'function' command)
+#
+# Original Author:
+# 2009-2020 Ryan Pavlik <ryan.pavlik@gmail.com> <abiryan@ryand.net>
+# http://academic.cleardefinition.com
+#
+# Copyright 2009-2013, Iowa State University.
+# Copyright 2013-2020, Ryan Pavlik
+# Copyright 2013-2020, Contributors
+# SPDX-License-Identifier: BSL-1.0
+# Distributed under the Boost Software License, Version 1.0.
+# (See accompanying file LICENSE_1_0.txt or copy at
+# http://www.boost.org/LICENSE_1_0.txt)
+
+if(__get_git_revision_description)
+    return()
+endif()
+set(__get_git_revision_description YES)
+
+# We must run the following at "include" time, not at function call time,
+# to find the path to this module rather than the path to a calling list file
+get_filename_component(_gitdescmoddir ${CMAKE_CURRENT_LIST_FILE} PATH)
+
+# Function _git_find_closest_git_dir finds the next closest .git directory
+# that is part of any directory in the path defined by _start_dir.
+# The result is returned in the parent scope variable whose name is passed
+# as variable _git_dir_var. If no .git directory can be found, the
+# function returns an empty string via _git_dir_var.
+#
+# Example: Given a path C:/bla/foo/bar and assuming C:/bla/.git exists and
+# neither foo nor bar contain a file/directory .git. This wil return
+# C:/bla/.git
+#
+function(_git_find_closest_git_dir _start_dir _git_dir_var)
+    set(cur_dir "${_start_dir}")
+    set(git_dir "${_start_dir}/.git")
+    while(NOT EXISTS "${git_dir}")
+        # .git dir not found, search parent directories
+        set(git_previous_parent "${cur_dir}")
+        get_filename_component(cur_dir "${cur_dir}" DIRECTORY)
+        if(cur_dir STREQUAL git_previous_parent)
+            # We have reached the root directory, we are not in git
+            set(${_git_dir_var}
+                ""
+                PARENT_SCOPE)
+            return()
+        endif()
+        set(git_dir "${cur_dir}/.git")
+    endwhile()
+    set(${_git_dir_var}
+        "${git_dir}"
+        PARENT_SCOPE)
+endfunction()
+
+function(get_git_head_revision _refspecvar _hashvar)
+    _git_find_closest_git_dir("${CMAKE_CURRENT_SOURCE_DIR}" GIT_DIR)
+
+    if("${ARGN}" STREQUAL "ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR")
+        set(ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR TRUE)
+    else()
+        set(ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR FALSE)
+    endif()
+    if(NOT "${GIT_DIR}" STREQUAL "")
+        file(RELATIVE_PATH _relative_to_source_dir "${CMAKE_SOURCE_DIR}"
+             "${GIT_DIR}")
+        if("${_relative_to_source_dir}" MATCHES "[.][.]" AND NOT ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR)
+            # We've gone above the CMake root dir.
+            set(GIT_DIR "")
+        endif()
+    endif()
+    if("${GIT_DIR}" STREQUAL "")
+        set(${_refspecvar}
+            "GITDIR-NOTFOUND"
+            PARENT_SCOPE)
+        set(${_hashvar}
+            "GITDIR-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    # Check if the current source dir is a git submodule or a worktree.
+    # In both cases .git is a file instead of a directory.
+    #
+    if(NOT IS_DIRECTORY ${GIT_DIR})
+        # The following git command will return a non empty string that
+        # points to the super project working tree if the current
+        # source dir is inside a git submodule.
+        # Otherwise the command will return an empty string.
+        #
+        execute_process(
+            COMMAND "${GIT_EXECUTABLE}" rev-parse
+                    --show-superproject-working-tree
+            WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+            OUTPUT_VARIABLE out
+            ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+        if(NOT "${out}" STREQUAL "")
+            # If out is empty, GIT_DIR/CMAKE_CURRENT_SOURCE_DIR is in a submodule
+            file(READ ${GIT_DIR} submodule)
+            string(REGEX REPLACE "gitdir: (.*)$" "\\1" GIT_DIR_RELATIVE
+                                 ${submodule})
+            string(STRIP ${GIT_DIR_RELATIVE} GIT_DIR_RELATIVE)
+            get_filename_component(SUBMODULE_DIR ${GIT_DIR} PATH)
+            get_filename_component(GIT_DIR ${SUBMODULE_DIR}/${GIT_DIR_RELATIVE}
+                                   ABSOLUTE)
+            set(HEAD_SOURCE_FILE "${GIT_DIR}/HEAD")
+        else()
+            # GIT_DIR/CMAKE_CURRENT_SOURCE_DIR is in a worktree
+            file(READ ${GIT_DIR} worktree_ref)
+            # The .git directory contains a path to the worktree information directory
+            # inside the parent git repo of the worktree.
+            #
+            string(REGEX REPLACE "gitdir: (.*)$" "\\1" git_worktree_dir
+                                 ${worktree_ref})
+            string(STRIP ${git_worktree_dir} git_worktree_dir)
+            _git_find_closest_git_dir("${git_worktree_dir}" GIT_DIR)
+            set(HEAD_SOURCE_FILE "${git_worktree_dir}/HEAD")
+        endif()
+    else()
+        set(HEAD_SOURCE_FILE "${GIT_DIR}/HEAD")
+    endif()
+    set(GIT_DATA "${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/git-data")
+    if(NOT EXISTS "${GIT_DATA}")
+        file(MAKE_DIRECTORY "${GIT_DATA}")
+    endif()
+
+    if(NOT EXISTS "${HEAD_SOURCE_FILE}")
+        return()
+    endif()
+    set(HEAD_FILE "${GIT_DATA}/HEAD")
+    configure_file("${HEAD_SOURCE_FILE}" "${HEAD_FILE}" COPYONLY)
+
+    configure_file("${_gitdescmoddir}/GetGitRevisionDescription.cmake.in"
+                   "${GIT_DATA}/grabRef.cmake" @ONLY)
+    include("${GIT_DATA}/grabRef.cmake")
+
+    set(${_refspecvar}
+        "${HEAD_REF}"
+        PARENT_SCOPE)
+    set(${_hashvar}
+        "${HEAD_HASH}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_describe _var)
+    if(NOT GIT_FOUND)
+        find_package(Git QUIET)
+    endif()
+    get_git_head_revision(refspec hash)
+    if(NOT GIT_FOUND)
+        set(${_var}
+            "GIT-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+    if(NOT hash)
+        set(${_var}
+            "HEAD-HASH-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    # TODO sanitize
+    #if((${ARGN}" MATCHES "&&") OR
+    #   (ARGN MATCHES "||") OR
+    #   (ARGN MATCHES "\\;"))
+    #   message("Please report the following error to the project!")
+    #   message(FATAL_ERROR "Looks like someone's doing something nefarious with git_describe! Passed arguments ${ARGN}")
+    #endif()
+
+    #message(STATUS "Arguments to execute_process: ${ARGN}")
+
+    execute_process(
+        COMMAND "${GIT_EXECUTABLE}" describe --tags --always ${hash} ${ARGN}
+        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        RESULT_VARIABLE res
+        OUTPUT_VARIABLE out
+        ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(NOT res EQUAL 0)
+        set(out "${out}-${res}-NOTFOUND")
+    endif()
+
+    set(${_var}
+        "${out}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_describe_working_tree _var)
+    if(NOT GIT_FOUND)
+        find_package(Git QUIET)
+    endif()
+    if(NOT GIT_FOUND)
+        set(${_var}
+            "GIT-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    execute_process(
+        COMMAND "${GIT_EXECUTABLE}" describe --dirty ${ARGN}
+        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        RESULT_VARIABLE res
+        OUTPUT_VARIABLE out
+        ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(NOT res EQUAL 0)
+        set(out "${out}-${res}-NOTFOUND")
+    endif()
+
+    set(${_var}
+        "${out}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_get_exact_tag _var)
+    git_describe(out --exact-match ${ARGN})
+    set(${_var}
+        "${out}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_local_changes _var)
+    if(NOT GIT_FOUND)
+        find_package(Git QUIET)
+    endif()
+    get_git_head_revision(refspec hash)
+    if(NOT GIT_FOUND)
+        set(${_var}
+            "GIT-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+    if(NOT hash)
+        set(${_var}
+            "HEAD-HASH-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    execute_process(
+        COMMAND "${GIT_EXECUTABLE}" diff-index --quiet HEAD --
+        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        RESULT_VARIABLE res
+        OUTPUT_VARIABLE out
+        ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(res EQUAL 0)
+        set(${_var}
+            "CLEAN"
+            PARENT_SCOPE)
+    else()
+        set(${_var}
+            "DIRTY"
+            PARENT_SCOPE)
+    endif()
+endfunction()

cmake/cmake-modules/rpavlik/GetGitRevisionDescription.cmake.in

@@ -0,0 +1,43 @@
+#
+# Internal file for GetGitRevisionDescription.cmake
+#
+# Requires CMake 2.6 or newer (uses the 'function' command)
+#
+# Original Author:
+# 2009-2010 Ryan Pavlik <rpavlik@iastate.edu> <abiryan@ryand.net>
+# http://academic.cleardefinition.com
+# Iowa State University HCI Graduate Program/VRAC
+#
+# Copyright 2009-2012, Iowa State University
+# Copyright 2011-2015, Contributors
+# Distributed under the Boost Software License, Version 1.0.
+# (See accompanying file LICENSE_1_0.txt or copy at
+# http://www.boost.org/LICENSE_1_0.txt)
+# SPDX-License-Identifier: BSL-1.0
+
+set(HEAD_HASH)
+
+file(READ "@HEAD_FILE@" HEAD_CONTENTS LIMIT 1024)
+
+string(STRIP "${HEAD_CONTENTS}" HEAD_CONTENTS)
+if(HEAD_CONTENTS MATCHES "ref")
+    # named branch
+    string(REPLACE "ref: " "" HEAD_REF "${HEAD_CONTENTS}")
+    if(EXISTS "@GIT_DIR@/${HEAD_REF}")
+        configure_file("@GIT_DIR@/${HEAD_REF}" "@GIT_DATA@/head-ref" COPYONLY)
+    else()
+        configure_file("@GIT_DIR@/packed-refs" "@GIT_DATA@/packed-refs" COPYONLY)
+        file(READ "@GIT_DATA@/packed-refs" PACKED_REFS)
+        if(${PACKED_REFS} MATCHES "([0-9a-z]*) ${HEAD_REF}")
+            set(HEAD_HASH "${CMAKE_MATCH_1}")
+        endif()
+    endif()
+else()
+    # detached HEAD
+    configure_file("@GIT_DIR@/HEAD" "@GIT_DATA@/head-ref" COPYONLY)
+endif()
+
+if(NOT HEAD_HASH)
+    file(READ "@GIT_DATA@/head-ref" HEAD_HASH LIMIT 1024)
+    string(STRIP "${HEAD_HASH}" HEAD_HASH)
+endif()

cmake/cmake-modules/rpavlik/LICENSES/BSD-3-Clause.txt

@@ -0,0 +1,26 @@
+Copyright (c) <year> <owner>. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors
+may be used to endorse or promote products derived from this software without
+specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

cmake/cmake-modules/rpavlik/LICENSES/BSL-1.0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute, execute,
+and transmit the Software, and to prepare derivative works of the Software,
+and to permit third-parties to whom the Software is furnished to do so, all
+subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer, must
+be included in all copies of the Software, in whole or in part, and all derivative
+works of the Software, unless such copies or derivative works are solely in
+the form of machine-executable object code generated by a source language
+processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES
+OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

cmake/cmake-modules/rpavlik/LICENSE_1_0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

cmake/version.cmake

@@ -0,0 +1,38 @@
+if(NOT DEFINED VERSION_MAJOR)
+    message(WARNING "version.cmake | No VERSION_MAJOR variable passed. Setting to 0")
+    set(VERSION_MAJOR 0)
+endif()
+if(NOT DEFINED VERSION_MINOR)
+    message(WARNING "version.cmake | No VERSION_MINOR variable passed. Setting to 0")
+    set(VERSION_MINOR 0)
+endif()
+if(NOT DEFINED VERSION_REVISION)
+    message(WARNING "version.cmake | No VERSION_REVISION variable passed. Setting to 0")
+    set(VERSION_REVISION 0)
+endif()
+if(NOT DEFINED VERSION_VCS_INFO)
+    set(VERSION_VCS_INFO "")
+endif()
+
+set(VERSION_TO_SET "#include \"version.h\"
+
+namespace fsfw {
+
+const int FSFW_VERSION_MAJOR = ${VERSION_MAJOR};
+const int FSFW_VERSION_MINOR = ${VERSION_MINOR};
+const int FSFW_VERSION_REVISION = ${VERSION_MINOR};
+const char FSFW_VCS_INFO[] = \"${VERSION_VCS_INFO}\";
+
+};
+")
+
+if(EXISTS ${VERSION_DIR}/versionAutogen.cpp)
+    file(READ ${VERSION_DIR}/versionAutogen.cpp OLD_VERSION)
+else()
+    set(OLD_VERSION "")
+endif()
+
+if (NOT "${VERSION_TO_SET}" STREQUAL "${OLD_VERSION}")
+    message(STATUS "Updating versionAutogen.cpp file")
+    file(WRITE ${VERSION_DIR}/versionAutogen.cpp "${VERSION_TO_SET}")
+endif()

docs/devicehandlers.rst

@@ -1,3 +1,110 @@
+.. _dhb-prim-doc:
+
 Device Handlers
 ==================
 
+Device handler components represent, control and monitor equipment, for example sensors or actuators
+of a spacecraft or the payload.
+
+Most device handlers have the same common functionality or
+requirements, which are fulfilled by implementing certain interfaces:
+
+- The handler/device needs to be commandable: :cpp:class:`HasActionsIF`
+- The handler needs to communicate with the physical device via a dedicated
+  communication bus, for example SpaceWire, UART or SPI: :cpp:class:`DeviceCommunicationIF`
+- The handler has housekeeping data which has to be exposed to the operator and/or other software
+  components: :cpp:class:`HasLocalDataPoolIF`
+- The handler has configurable parameters: :cpp:class:`ReceivesParameterMessagesIF` which
+  also implements :cpp:class:`HasParametersIF`
+- The handler has health states, for example to indicate a broken device:
+  :cpp:class:`HasHealthIF`
+- The handler has modes. For example there are the core modes `MODE_ON`, `MODE_OFF`
+  and `MODE_NORMAL` provided by the FSFW. `MODE_ON` means that a device is physically powered
+  but that it is not periodically polling data from the
+  physical device, `MODE_NORMAL` means that it is able to do that: :cpp:class:`HasModesIF`
+
+The device handler base therefore provides abstractions for a lot of common
+functionality, which can potentially avoid high amounts or logic and code duplication.
+
+Template Device Handler Base File
+----------------------------------
+
+This is an example template device handler header file with all necessary
+functions implemented:
+
+.. code-block:: cpp
+
+	#ifndef __TESTDEVICEHANDLER_H_
+	#define __TESTDEVICEHANDLER_H_
+
+	#include <fsfw/devicehandlers/DeviceHandlerBase.h>
+
+	class TestDeviceHandler: DeviceHandlerBase {
+	public:
+	  TestDeviceHandler(object_id_t objectId, object_id_t comIF, CookieIF* cookie);
+	private:
+	  void doStartUp() override;
+	  void doShutDown() override;
+	  ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t* id) override;
+	  ReturnValue_t buildTransitionDeviceCommand(DeviceCommandId_t* id) override;
+	  void fillCommandAndReplyMap() override;
+	  ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand, const uint8_t* commandData,
+	                                        size_t commandDataLen) override;
+	  ReturnValue_t scanForReply(const uint8_t* start, size_t remainingSize, DeviceCommandId_t* foundId,
+	                             size_t* foundLen) override;
+	  ReturnValue_t interpretDeviceReply(DeviceCommandId_t id, const uint8_t* packet) override;
+	  uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override;
+	  ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
+	                                        LocalDataPoolManager& poolManager) override;
+
+	};
+
+	#endif /* __TESTDEVICEHANDLER_H_ */
+
+and the respective source file with sensible default return values:
+
+.. code-block:: cpp
+
+	#include "TestDeviceHandler.h"
+
+	TestDeviceHandler::TestDeviceHandler(object_id_t objectId, object_id_t comIF, CookieIF* cookie)
+	    : DeviceHandlerBase(objectId, comIF, cookie) {}
+
+	void TestDeviceHandler::doStartUp() {}
+
+	void TestDeviceHandler::doShutDown() {}
+
+	ReturnValue_t TestDeviceHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
+	  return HasReturnvaluesIF::RETURN_OK;
+	}
+
+	ReturnValue_t TestDeviceHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
+	  return HasReturnvaluesIF::RETURN_OK;
+	}
+
+	void TestDeviceHandler::fillCommandAndReplyMap() {}
+
+	ReturnValue_t TestDeviceHandler::buildCommandFromCommand(DeviceCommandId_t deviceCommand,
+	                                                         const uint8_t* commandData,
+	                                                         size_t commandDataLen) {
+	  return HasReturnvaluesIF::RETURN_OK;
+	}
+
+	ReturnValue_t TestDeviceHandler::scanForReply(const uint8_t* start, size_t remainingSize,
+	                                              DeviceCommandId_t* foundId, size_t* foundLen) {
+	  return HasReturnvaluesIF::RETURN_OK;
+	}
+
+	ReturnValue_t TestDeviceHandler::interpretDeviceReply(DeviceCommandId_t id,
+	                                                      const uint8_t* packet) {
+	  return HasReturnvaluesIF::RETURN_OK;
+	}
+
+	uint32_t TestDeviceHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) {
+	  return 10000;
+	}
+
+	ReturnValue_t TestDeviceHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
+	                                                         LocalDataPoolManager& poolManager) {
+	  return HasReturnvaluesIF::RETURN_OK;
+	}

docs/getting_started.rst

@@ -19,6 +19,29 @@ A template configuration folder was provided and can be copied into the project
 a starting point. The [configuration section](docs/README-config.md#top) provides more specific 
 information about the possible options.
 
+Prerequisites
+-------------------
+
+The Embedded Template Library (etl) is a dependency of the FSFW which is automatically
+installed and provided by the build system unless the correction version was installed.
+The current recommended version can be found inside the fsfw ``CMakeLists.txt`` file or by using
+``ccmake`` and looking up the ``FSFW_ETL_LIB_MAJOR_VERSION`` variable.
+
+You can install the ETL library like this. On Linux, it might be necessary to add ``sudo`` before
+the install call:
+
+.. code-block:: console
+
+   git clone https://github.com/ETLCPP/etl
+   cd etl
+   git checkout <currentRecommendedVersion>
+   mkdir build && cd build
+   cmake ..
+   cmake --install .
+
+It is recommended to install ``20.27.2`` or newer for the package version handling of
+ETL to work.
+
 Adding the library
 -------------------
 
@@ -60,6 +83,20 @@ The FSFW also has unittests which use the `Catch2 library`_.
 These are built by setting the CMake option ``FSFW_BUILD_UNITTESTS`` to ``ON`` or `TRUE`
 from your project `CMakeLists.txt` file or from the command line.
 
+You can install the Catch2 library, which prevents the build system to avoid re-downloading
+the dependency if the unit tests are completely rebuilt. The current recommended version
+can be found inside the fsfw ``CMakeLists.txt`` file or by using ``ccmake`` and looking up
+the ``FSFW_CATCH2_LIB_VERSION`` variable.
+
+.. code-block:: console
+
+   git clone https://github.com/catchorg/Catch2.git
+   cd Catch2
+   git checkout <currentRecommendedVersion>
+   cmake -Bbuild -H. -DBUILD_TESTING=OFF
+   sudo cmake --build build/ --target install
+
+
 The fsfw-tests binary will be built as part of the static library and dropped alongside it.
 If the unittests are built, the library and the tests will be built with coverage information by
 default. This can be disabled by setting the `FSFW_TESTS_COV_GEN` option to `OFF` or `FALSE`.
@@ -90,8 +127,21 @@ Building the documentation
 ----------------------------
 
 The FSFW documentation is built using the tools Sphinx, doxygen and breathe based on the
-instructions provided in `this blogpost <https://devblogs.microsoft.com/cppblog/clear-functional-c-documentation-with-sphinx-breathe-doxygen-cmake/>`_. You can set up a
-documentation build system using the following commands
+instructions provided in `this blogpost <https://devblogs.microsoft.com/cppblog/clear-functional-c-documentation-with-sphinx-breathe-doxygen-cmake/>`_. If you
+want to do this locally, set up the prerequisites first. This requires a ``python3``
+installation as well. Example here is for Ubuntu.
+
+.. code-block:: console
+
+   sudo apt-get install doxygen graphviz
+
+And the following Python packages
+
+.. code-block:: console
+
+   python3 -m pip install sphinx breathe
+
+You can set up a documentation build system using the following commands
 
 .. code-block:: bash
 
@@ -110,6 +160,14 @@ folder. Simply open the ``index.html`` in the webbrowser of your choice.
 The ``helper.py`` script located in the ``script`` folder can also be used to create, build
 and open the documentation conveniently. Try ``helper.py -h`` for more information.
 
+Formatting the source
+-----------------------
+
+The formatting is done by the ``clang-format`` tool. The configuration is contained within the
+``.clang-format`` file in the repository root. As long as ``clang-format`` is installed, you
+can run the ``apply-clang-format.sh`` helper script to format all source files consistently.
+
+
 .. _`Hosted FSFW example`: https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-hosted
 .. _`Catch2 library`: https://github.com/catchorg/Catch2
 .. _`Code coverage`: https://github.com/bilke/cmake-modules/tree/master

docs/highlevel.rst

@@ -118,7 +118,7 @@ The DH has mechanisms to monitor the communication with the physical device whic
 for FDIR reaction.  Device Handlers can be created by implementing ``DeviceHandlerBase``.
 A standard FDIR component for the DH will be created automatically but can
 be overwritten by the user. More information on DeviceHandlers can be found in the
-related [documentation section](doc/README-devicehandlers.md#top).
+related :ref:`documentation section <dhb-prim-doc>`.
 
 Modes and Health
 --------------------

hal/CMakeLists.txt

@@ -9,6 +9,7 @@ option(FSFW_HAL_ADD_LINUX "Add the Linux HAL to the sources. Requires gpiod libr
 # Linux. The only exception from this is the gpiod library which requires a dedicated installation,
 # but CMake is able to determine whether this library is installed with find_library.
 option(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS "Add peripheral drivers for embedded Linux" ON)
+option(FSFW_HAL_LINUX_ADD_LIBGPIOD "Target implements libgpiod" ON)
 
 option(FSFW_HAL_ADD_RASPBERRY_PI "Add Raspberry Pi specific code to the sources" OFF)
 option(FSFW_HAL_ADD_STM32H7 "Add the STM32H7 HAL to the sources" OFF)

hal/src/fsfw_hal/common/gpio/gpioDefinitions.h

@@ -9,11 +9,11 @@ using gpioId_t = uint16_t;
 
 namespace gpio {
 
-enum Levels : uint8_t { LOW = 0, HIGH = 1, NONE = 99 };
+enum class Levels : int { LOW = 0, HIGH = 1, NONE = 99 };
 
-enum Direction : uint8_t { IN = 0, OUT = 1 };
+enum class Direction : int { IN = 0, OUT = 1 };
 
-enum GpioOperation { READ, WRITE };
+enum class GpioOperation { READ, WRITE };
 
 enum class GpioTypes {
   NONE,
@@ -80,7 +80,7 @@ class GpiodRegularByChip : public GpiodRegularBase {
  public:
   GpiodRegularByChip()
       : GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP, std::string(), gpio::Direction::IN,
-                         gpio::LOW, 0) {}
+                         gpio::Levels::LOW, 0) {}
 
   GpiodRegularByChip(std::string chipname_, int lineNum_, std::string consumer_,
                      gpio::Direction direction_, gpio::Levels initValue_)
@@ -90,7 +90,7 @@ class GpiodRegularByChip : public GpiodRegularBase {
 
   GpiodRegularByChip(std::string chipname_, int lineNum_, std::string consumer_)
       : GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_CHIP, consumer_, gpio::Direction::IN,
-                         gpio::LOW, lineNum_),
+                         gpio::Levels::LOW, lineNum_),
         chipname(chipname_) {}
 
   std::string chipname;
@@ -106,7 +106,7 @@ class GpiodRegularByLabel : public GpiodRegularBase {
 
   GpiodRegularByLabel(std::string label_, int lineNum_, std::string consumer_)
       : GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LABEL, consumer_, gpio::Direction::IN,
-                         gpio::LOW, lineNum_),
+                         gpio::Levels::LOW, lineNum_),
         label(label_) {}
 
   std::string label;
@@ -127,7 +127,7 @@ class GpiodRegularByLineName : public GpiodRegularBase {
 
   GpiodRegularByLineName(std::string lineName_, std::string consumer_)
       : GpiodRegularBase(gpio::GpioTypes::GPIO_REGULAR_BY_LINE_NAME, consumer_, gpio::Direction::IN,
-                         gpio::LOW),
+                         gpio::Levels::LOW),
         lineName(lineName_) {}
 
   std::string lineName;

hal/src/fsfw_hal/devicehandlers/GyroL3GD20Handler.cpp

@@ -8,11 +8,7 @@ GyroHandlerL3GD20H::GyroHandlerL3GD20H(object_id_t objectId, object_id_t deviceC
                                        CookieIF *comCookie, uint32_t transitionDelayMs)
     : DeviceHandlerBase(objectId, deviceCommunication, comCookie),
       transitionDelayMs(transitionDelayMs),
-      dataset(this) {
-#if FSFW_HAL_L3GD20_GYRO_DEBUG == 1
-  debugDivider = new PeriodicOperationDivider(3);
-#endif
-}
+      dataset(this) {}
 
 GyroHandlerL3GD20H::~GyroHandlerL3GD20H() {}
 
@@ -193,22 +189,22 @@ ReturnValue_t GyroHandlerL3GD20H::interpretDeviceReply(DeviceCommandId_t id,
 
       int8_t temperaturOffset = (-1) * packet[L3GD20H::TEMPERATURE_IDX];
       float temperature = 25.0 + temperaturOffset;
-#if FSFW_HAL_L3GD20_GYRO_DEBUG == 1
-      if (debugDivider->checkAndIncrement()) {
-        /* Set terminal to utf-8 if there is an issue with micro printout. */
+      if (periodicPrintout) {
+        if (debugDivider.checkAndIncrement()) {
+          /* Set terminal to utf-8 if there is an issue with micro printout. */
 #if FSFW_CPP_OSTREAM_ENABLED == 1
-        sif::info << "GyroHandlerL3GD20H: Angular velocities (deg/s):" << std::endl;
-        sif::info << "X: " << angVelocX << std::endl;
-        sif::info << "Y: " << angVelocY << std::endl;
-        sif::info << "Z: " << angVelocZ << std::endl;
+          sif::info << "GyroHandlerL3GD20H: Angular velocities (deg/s):" << std::endl;
+          sif::info << "X: " << angVelocX << std::endl;
+          sif::info << "Y: " << angVelocY << std::endl;
+          sif::info << "Z: " << angVelocZ << std::endl;
 #else
-        sif::printInfo("GyroHandlerL3GD20H: Angular velocities (deg/s):\n");
-        sif::printInfo("X: %f\n", angVelocX);
-        sif::printInfo("Y: %f\n", angVelocY);
-        sif::printInfo("Z: %f\n", angVelocZ);
+          sif::printInfo("GyroHandlerL3GD20H: Angular velocities (deg/s):\n");
+          sif::printInfo("X: %f\n", angVelocX);
+          sif::printInfo("Y: %f\n", angVelocY);
+          sif::printInfo("Z: %f\n", angVelocZ);
 #endif
+        }
       }
-#endif
 
       PoolReadGuard readSet(&dataset);
       if (readSet.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
@@ -272,3 +268,8 @@ void GyroHandlerL3GD20H::setAbsoluteLimits(float limitX, float limitY, float lim
   this->absLimitY = limitY;
   this->absLimitZ = limitZ;
 }
+
+void GyroHandlerL3GD20H::enablePeriodicPrintouts(bool enable, uint8_t divider) {
+  periodicPrintout = enable;
+  debugDivider.setDivider(divider);
+}

hal/src/fsfw_hal/devicehandlers/GyroL3GD20Handler.h

@@ -5,7 +5,6 @@
 #include <fsfw/globalfunctions/PeriodicOperationDivider.h>
 
 #include "devicedefinitions/GyroL3GD20Definitions.h"
-#include "fsfw/FSFW.h"
 
 /**
  * @brief 	Device Handler for the L3GD20H gyroscope sensor
@@ -22,6 +21,8 @@ class GyroHandlerL3GD20H : public DeviceHandlerBase {
                      uint32_t transitionDelayMs);
   virtual ~GyroHandlerL3GD20H();
 
+  void enablePeriodicPrintouts(bool enable, uint8_t divider);
+
   /**
    * Set the absolute limit for the values on the axis in degrees per second.
    * The dataset values will be marked as invalid if that limit is exceeded
@@ -80,9 +81,8 @@ class GyroHandlerL3GD20H : public DeviceHandlerBase {
   // Set default value
   float sensitivity = L3GD20H::SENSITIVITY_00;
 
-#if FSFW_HAL_L3GD20_GYRO_DEBUG == 1
-  PeriodicOperationDivider *debugDivider = nullptr;
-#endif
+  bool periodicPrintout = false;
+  PeriodicOperationDivider debugDivider = PeriodicOperationDivider(3);
 };
 
 #endif /* MISSION_DEVICES_GYROL3GD20HANDLER_H_ */

hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.cpp

@@ -1,20 +1,14 @@
 #include "MgmLIS3MDLHandler.h"
 
-#include "fsfw/datapool/PoolReadGuard.h"
-#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
-#include "fsfw/globalfunctions/PeriodicOperationDivider.h"
-#endif
-
 #include <cmath>
 
+#include "fsfw/datapool/PoolReadGuard.h"
+
 MgmLIS3MDLHandler::MgmLIS3MDLHandler(object_id_t objectId, object_id_t deviceCommunication,
                                      CookieIF *comCookie, uint32_t transitionDelay)
     : DeviceHandlerBase(objectId, deviceCommunication, comCookie),
       dataset(this),
       transitionDelay(transitionDelay) {
-#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
-  debugDivider = new PeriodicOperationDivider(3);
-#endif
   // Set to default values right away
   registers[0] = MGMLIS3MDL::CTRL_REG1_DEFAULT;
   registers[1] = MGMLIS3MDL::CTRL_REG2_DEFAULT;
@@ -264,7 +258,7 @@ ReturnValue_t MgmLIS3MDLHandler::interpretDeviceReply(DeviceCommandId_t id, cons
       int16_t mgmMeasurementRawZ =
           packet[MGMLIS3MDL::Z_HIGHBYTE_IDX] << 8 | packet[MGMLIS3MDL::Z_LOWBYTE_IDX];
 
-      /* Target value in microtesla */
+      // Target value in microtesla
       float mgmX = static_cast<float>(mgmMeasurementRawX) * sensitivityFactor *
                    MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
       float mgmY = static_cast<float>(mgmMeasurementRawY) * sensitivityFactor *
@@ -272,23 +266,24 @@ ReturnValue_t MgmLIS3MDLHandler::interpretDeviceReply(DeviceCommandId_t id, cons
       float mgmZ = static_cast<float>(mgmMeasurementRawZ) * sensitivityFactor *
                    MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
 
-#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
-      if (debugDivider->checkAndIncrement()) {
+      if (periodicPrintout) {
+        if (debugDivider.checkAndIncrement()) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
-        sif::info << "MGMHandlerLIS3: Magnetic field strength in"
-                     " microtesla:"
-                  << std::endl;
-        sif::info << "X: " << mgmX << " uT" << std::endl;
-        sif::info << "Y: " << mgmY << " uT" << std::endl;
-        sif::info << "Z: " << mgmZ << " uT" << std::endl;
+          sif::info << "MGMHandlerLIS3: Magnetic field strength in"
+                       " microtesla:"
+                    << std::endl;
+          sif::info << "X: " << mgmX << " uT" << std::endl;
+          sif::info << "Y: " << mgmY << " uT" << std::endl;
+          sif::info << "Z: " << mgmZ << " uT" << std::endl;
 #else
-        sif::printInfo("MGMHandlerLIS3: Magnetic field strength in microtesla:\n");
-        sif::printInfo("X: %f uT\n", mgmX);
-        sif::printInfo("Y: %f uT\n", mgmY);
-        sif::printInfo("Z: %f uT\n", mgmZ);
+          sif::printInfo("MGMHandlerLIS3: Magnetic field strength in microtesla:\n");
+          sif::printInfo("X: %f uT\n", mgmX);
+          sif::printInfo("Y: %f uT\n", mgmY);
+          sif::printInfo("Z: %f uT\n", mgmZ);
 #endif /* FSFW_CPP_OSTREAM_ENABLED == 0 */
+        }
       }
-#endif /* OBSW_VERBOSE_LEVEL >= 1 */
+
       PoolReadGuard readHelper(&dataset);
       if (readHelper.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
         if (std::abs(mgmX) < absLimitX) {
@@ -318,15 +313,16 @@ ReturnValue_t MgmLIS3MDLHandler::interpretDeviceReply(DeviceCommandId_t id, cons
     case MGMLIS3MDL::READ_TEMPERATURE: {
       int16_t tempValueRaw = packet[2] << 8 | packet[1];
       float tempValue = 25.0 + ((static_cast<float>(tempValueRaw)) / 8.0);
-#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
-      if (debugDivider->check()) {
+      if (periodicPrintout) {
+        if (debugDivider.check()) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
-        sif::info << "MGMHandlerLIS3: Temperature: " << tempValue << " C" << std::endl;
+          sif::info << "MGMHandlerLIS3: Temperature: " << tempValue << " C" << std::endl;
 #else
-        sif::printInfo("MGMHandlerLIS3: Temperature: %f C\n");
+          sif::printInfo("MGMHandlerLIS3: Temperature: %f C\n");
 #endif
+        }
       }
-#endif
+
       ReturnValue_t result = dataset.read();
       if (result == HasReturnvaluesIF::RETURN_OK) {
         dataset.temperature = tempValue;
@@ -462,7 +458,9 @@ ReturnValue_t MgmLIS3MDLHandler::prepareCtrlRegisterWrite() {
   return RETURN_OK;
 }
 
-void MgmLIS3MDLHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {}
+void MgmLIS3MDLHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
+  DeviceHandlerBase::doTransition(modeFrom, subModeFrom);
+}
 
 uint32_t MgmLIS3MDLHandler::getTransitionDelayMs(Mode_t from, Mode_t to) { return transitionDelay; }
 
@@ -482,3 +480,8 @@ void MgmLIS3MDLHandler::setAbsoluteLimits(float xLimit, float yLimit, float zLim
   this->absLimitY = yLimit;
   this->absLimitZ = zLimit;
 }
+
+void MgmLIS3MDLHandler::enablePeriodicPrintouts(bool enable, uint8_t divider) {
+  periodicPrintout = enable;
+  debugDivider.setDivider(divider);
+}

hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h

@@ -3,8 +3,8 @@
 
 #include "devicedefinitions/MgmLIS3HandlerDefs.h"
 #include "events/subsystemIdRanges.h"
-#include "fsfw/FSFW.h"
 #include "fsfw/devicehandlers/DeviceHandlerBase.h"
+#include "fsfw/globalfunctions/PeriodicOperationDivider.h"
 
 class PeriodicOperationDivider;
 
@@ -30,6 +30,7 @@ class MgmLIS3MDLHandler : public DeviceHandlerBase {
                     uint32_t transitionDelay);
   virtual ~MgmLIS3MDLHandler();
 
+  void enablePeriodicPrintouts(bool enable, uint8_t divider);
   /**
    * Set the absolute limit for the values on the axis in microtesla. The dataset values will
    * be marked as invalid if that limit is exceeded
@@ -167,9 +168,8 @@ class MgmLIS3MDLHandler : public DeviceHandlerBase {
    */
   ReturnValue_t prepareCtrlRegisterWrite();
 
-#if FSFW_HAL_LIS3MDL_MGM_DEBUG == 1
-  PeriodicOperationDivider *debugDivider;
-#endif
+  bool periodicPrintout = false;
+  PeriodicOperationDivider debugDivider = PeriodicOperationDivider(3);
 };
 
 #endif /* MISSION_DEVICES_MGMLIS3MDLHANDLER_H_ */

hal/src/fsfw_hal/devicehandlers/MgmRM3100Handler.cpp

@@ -10,11 +10,7 @@ MgmRM3100Handler::MgmRM3100Handler(object_id_t objectId, object_id_t deviceCommu
                                    CookieIF *comCookie, uint32_t transitionDelay)
     : DeviceHandlerBase(objectId, deviceCommunication, comCookie),
       primaryDataset(this),
-      transitionDelay(transitionDelay) {
-#if FSFW_HAL_RM3100_MGM_DEBUG == 1
-  debugDivider = new PeriodicOperationDivider(3);
-#endif
-}
+      transitionDelay(transitionDelay) {}
 
 MgmRM3100Handler::~MgmRM3100Handler() {}
 
@@ -337,23 +333,23 @@ ReturnValue_t MgmRM3100Handler::handleDataReadout(const uint8_t *packet) {
   float fieldStrengthY = fieldStrengthRawY * scaleFactorX;
   float fieldStrengthZ = fieldStrengthRawZ * scaleFactorX;
 
-#if FSFW_HAL_RM3100_MGM_DEBUG == 1
-  if (debugDivider->checkAndIncrement()) {
+  if (periodicPrintout) {
+    if (debugDivider.checkAndIncrement()) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
-    sif::info << "MgmRM3100Handler: Magnetic field strength in"
-                 " microtesla:"
-              << std::endl;
-    sif::info << "X: " << fieldStrengthX << " uT" << std::endl;
-    sif::info << "Y: " << fieldStrengthY << " uT" << std::endl;
-    sif::info << "Z: " << fieldStrengthZ << " uT" << std::endl;
+      sif::info << "MgmRM3100Handler: Magnetic field strength in"
+                   " microtesla:"
+                << std::endl;
+      sif::info << "X: " << fieldStrengthX << " uT" << std::endl;
+      sif::info << "Y: " << fieldStrengthY << " uT" << std::endl;
+      sif::info << "Z: " << fieldStrengthZ << " uT" << std::endl;
 #else
-    sif::printInfo("MgmRM3100Handler: Magnetic field strength in microtesla:\n");
-    sif::printInfo("X: %f uT\n", fieldStrengthX);
-    sif::printInfo("Y: %f uT\n", fieldStrengthY);
-    sif::printInfo("Z: %f uT\n", fieldStrengthZ);
+      sif::printInfo("MgmRM3100Handler: Magnetic field strength in microtesla:\n");
+      sif::printInfo("X: %f uT\n", fieldStrengthX);
+      sif::printInfo("Y: %f uT\n", fieldStrengthY);
+      sif::printInfo("Z: %f uT\n", fieldStrengthZ);
 #endif
+    }
   }
-#endif
 
   // TODO: Sanity check on values?
   PoolReadGuard readGuard(&primaryDataset);
@@ -365,3 +361,8 @@ ReturnValue_t MgmRM3100Handler::handleDataReadout(const uint8_t *packet) {
   }
   return RETURN_OK;
 }
+
+void MgmRM3100Handler::enablePeriodicPrintouts(bool enable, uint8_t divider) {
+  periodicPrintout = enable;
+  debugDivider.setDivider(divider);
+}

hal/src/fsfw_hal/devicehandlers/MgmRM3100Handler.h

@@ -2,12 +2,8 @@
 #define MISSION_DEVICES_MGMRM3100HANDLER_H_
 
 #include "devicedefinitions/MgmRM3100HandlerDefs.h"
-#include "fsfw/FSFW.h"
 #include "fsfw/devicehandlers/DeviceHandlerBase.h"
-
-#if FSFW_HAL_RM3100_MGM_DEBUG == 1
 #include "fsfw/globalfunctions/PeriodicOperationDivider.h"
-#endif
 
 /**
  * @brief 	Device Handler for the RM3100 geomagnetic magnetometer sensor
@@ -33,6 +29,7 @@ class MgmRM3100Handler : public DeviceHandlerBase {
                    uint32_t transitionDelay);
   virtual ~MgmRM3100Handler();
 
+  void enablePeriodicPrintouts(bool enable, uint8_t divider);
   /**
    * Configure device handler to go to normal mode after startup immediately
    * @param enable
@@ -98,9 +95,9 @@ class MgmRM3100Handler : public DeviceHandlerBase {
                                         size_t commandDataLen);
 
   ReturnValue_t handleDataReadout(const uint8_t *packet);
-#if FSFW_HAL_RM3100_MGM_DEBUG == 1
-  PeriodicOperationDivider *debugDivider;
-#endif
+
+  bool periodicPrintout = false;
+  PeriodicOperationDivider debugDivider = PeriodicOperationDivider(3);
 };
 
 #endif /* MISSION_DEVICEHANDLING_MGMRM3100HANDLER_H_ */

hal/src/fsfw_hal/linux/CMakeLists.txt

@@ -9,8 +9,17 @@ target_sources(${LIB_FSFW_NAME} PRIVATE
 )
 
 if(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS)
+if(FSFW_HAL_LINUX_ADD_LIBGPIOD)
 	add_subdirectory(gpio)
-	add_subdirectory(spi)
-	add_subdirectory(i2c)
-	add_subdirectory(uart)
 endif()
+	add_subdirectory(uart)
+	# Adding those does not really make sense on Apple systems which
+	# are generally host systems. It won't even compile as the headers
+	# are missing
+	if(NOT APPLE)
+		add_subdirectory(i2c)
+		add_subdirectory(spi)
+	endif()
+endif()
+
+add_subdirectory(uio)

hal/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.cpp

@@ -44,6 +44,7 @@ ReturnValue_t LinuxLibgpioIF::addGpios(GpioCookie* gpioCookie) {
 }
 
 ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
+  ReturnValue_t result = RETURN_OK;
   for (auto& gpioConfig : mapToAdd) {
     auto& gpioType = gpioConfig.second->gpioType;
     switch (gpioType) {
@@ -55,7 +56,7 @@ ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
         if (regularGpio == nullptr) {
           return GPIO_INVALID_INSTANCE;
         }
-        configureGpioByChip(gpioConfig.first, *regularGpio);
+        result = configureGpioByChip(gpioConfig.first, *regularGpio);
         break;
       }
       case (gpio::GpioTypes::GPIO_REGULAR_BY_LABEL): {
@@ -63,7 +64,7 @@ ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
         if (regularGpio == nullptr) {
           return GPIO_INVALID_INSTANCE;
         }
-        configureGpioByLabel(gpioConfig.first, *regularGpio);
+        result = configureGpioByLabel(gpioConfig.first, *regularGpio);
         break;
       }
       case (gpio::GpioTypes::GPIO_REGULAR_BY_LINE_NAME): {
@@ -71,7 +72,7 @@ ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
         if (regularGpio == nullptr) {
           return GPIO_INVALID_INSTANCE;
         }
-        configureGpioByLineName(gpioConfig.first, *regularGpio);
+        result = configureGpioByLineName(gpioConfig.first, *regularGpio);
         break;
       }
       case (gpio::GpioTypes::CALLBACK): {
@@ -83,8 +84,11 @@ ReturnValue_t LinuxLibgpioIF::configureGpios(GpioMap& mapToAdd) {
                                gpioCallback->initValue, gpioCallback->callbackArgs);
       }
     }
+    if (result != RETURN_OK) {
+      return GPIO_INIT_FAILED;
+    }
   }
-  return RETURN_OK;
+  return result;
 }
 
 ReturnValue_t LinuxLibgpioIF::configureGpioByLabel(gpioId_t gpioId,
@@ -161,11 +165,12 @@ ReturnValue_t LinuxLibgpioIF::configureRegularGpio(gpioId_t gpioId, struct gpiod
   consumer = regularGpio.consumer;
   /* Configure direction and add a description to the GPIO */
   switch (direction) {
-    case (gpio::OUT): {
-      result = gpiod_line_request_output(lineHandle, consumer.c_str(), regularGpio.initValue);
+    case (gpio::Direction::OUT): {
+      result = gpiod_line_request_output(lineHandle, consumer.c_str(),
+                                         static_cast<int>(regularGpio.initValue));
       break;
     }
-    case (gpio::IN): {
+    case (gpio::Direction::IN): {
       result = gpiod_line_request_input(lineHandle, consumer.c_str());
       break;
     }
@@ -211,7 +216,7 @@ ReturnValue_t LinuxLibgpioIF::pullHigh(gpioId_t gpioId) {
     if (regularGpio == nullptr) {
       return GPIO_TYPE_FAILURE;
     }
-    return driveGpio(gpioId, *regularGpio, gpio::HIGH);
+    return driveGpio(gpioId, *regularGpio, gpio::Levels::HIGH);
   } else {
     auto gpioCallback = dynamic_cast<GpioCallback*>(gpioMapIter->second);
     if (gpioCallback->callback == nullptr) {
@@ -243,7 +248,7 @@ ReturnValue_t LinuxLibgpioIF::pullLow(gpioId_t gpioId) {
     if (regularGpio == nullptr) {
       return GPIO_TYPE_FAILURE;
     }
-    return driveGpio(gpioId, *regularGpio, gpio::LOW);
+    return driveGpio(gpioId, *regularGpio, gpio::Levels::LOW);
   } else {
     auto gpioCallback = dynamic_cast<GpioCallback*>(gpioMapIter->second);
     if (gpioCallback->callback == nullptr) {
@@ -258,11 +263,11 @@ ReturnValue_t LinuxLibgpioIF::pullLow(gpioId_t gpioId) {
 
 ReturnValue_t LinuxLibgpioIF::driveGpio(gpioId_t gpioId, GpiodRegularBase& regularGpio,
                                         gpio::Levels logicLevel) {
-  int result = gpiod_line_set_value(regularGpio.lineHandle, logicLevel);
+  int result = gpiod_line_set_value(regularGpio.lineHandle, static_cast<int>(logicLevel));
   if (result < 0) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
     sif::warning << "LinuxLibgpioIF::driveGpio: Failed to pull GPIO with ID " << gpioId
-                 << " to logic level " << logicLevel << std::endl;
+                 << " to logic level " << static_cast<int>(logicLevel) << std::endl;
 #else
     sif::printWarning(
         "LinuxLibgpioIF::driveGpio: Failed to pull GPIO with ID %d to "

hal/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h

@@ -29,6 +29,8 @@ class LinuxLibgpioIF : public GpioIF, public SystemObject {
       HasReturnvaluesIF::makeReturnCode(gpioRetvalId, 4);
   static constexpr ReturnValue_t GPIO_DUPLICATE_DETECTED =
       HasReturnvaluesIF::makeReturnCode(gpioRetvalId, 5);
+  static constexpr ReturnValue_t GPIO_INIT_FAILED =
+      HasReturnvaluesIF::makeReturnCode(gpioRetvalId, 6);
 
   LinuxLibgpioIF(object_id_t objectId);
   virtual ~LinuxLibgpioIF();

hal/src/fsfw_hal/linux/i2c/I2cComIF.cpp

@@ -1,4 +1,13 @@
-#include "fsfw_hal/linux/i2c/I2cComIF.h"
+#include "I2cComIF.h"
+
+#include "fsfw/FSFW.h"
+#include "fsfw/serviceinterface.h"
+#include "fsfw_hal/linux/UnixFileGuard.h"
+#include "fsfw_hal/linux/utility.h"
+
+#if FSFW_HAL_I2C_WIRETAPPING == 1
+#include "fsfw/globalfunctions/arrayprinter.h"
+#endif
 
 #include <errno.h>
 #include <fcntl.h>
@@ -8,11 +17,6 @@
 
 #include <cstring>
 
-#include "fsfw/FSFW.h"
-#include "fsfw/serviceinterface.h"
-#include "fsfw_hal/linux/UnixFileGuard.h"
-#include "fsfw_hal/linux/utility.h"
-
 I2cComIF::I2cComIF(object_id_t objectId) : SystemObject(objectId) {}
 
 I2cComIF::~I2cComIF() {}
@@ -112,6 +116,11 @@ ReturnValue_t I2cComIF::sendMessage(CookieIF* cookie, const uint8_t* sendData, s
 #endif
     return HasReturnvaluesIF::RETURN_FAILED;
   }
+
+#if FSFW_HAL_I2C_WIRETAPPING == 1
+  sif::info << "Sent I2C data to bus " << deviceFile << ":" << std::endl;
+  arrayprinter::print(sendData, sendLen);
+#endif
   return HasReturnvaluesIF::RETURN_OK;
 }
 
@@ -176,6 +185,11 @@ ReturnValue_t I2cComIF::requestReceiveMessage(CookieIF* cookie, size_t requestLe
     return HasReturnvaluesIF::RETURN_FAILED;
   }
 
+#if FSFW_HAL_I2C_WIRETAPPING == 1
+  sif::info << "I2C read bytes from bus " << deviceFile << ":" << std::endl;
+  arrayprinter::print(replyBuffer, requestLen);
+#endif
+
   i2cDeviceMapIter->second.replyLen = requestLen;
   return HasReturnvaluesIF::RETURN_OK;
 }

hal/src/fsfw_hal/linux/rpi/GpioRPi.cpp

@@ -7,7 +7,7 @@
 
 ReturnValue_t gpio::createRpiGpioConfig(GpioCookie* cookie, gpioId_t gpioId, int bcmPin,
                                         std::string consumer, gpio::Direction direction,
-                                        int initValue) {
+                                        gpio::Levels initValue) {
   if (cookie == nullptr) {
     return HasReturnvaluesIF::RETURN_FAILED;
   }

hal/src/fsfw_hal/linux/rpi/GpioRPi.h

@@ -21,7 +21,8 @@ namespace gpio {
  * @return
  */
 ReturnValue_t createRpiGpioConfig(GpioCookie* cookie, gpioId_t gpioId, int bcmPin,
-                                  std::string consumer, gpio::Direction direction, int initValue);
+                                  std::string consumer, gpio::Direction direction,
+                                  gpio::Levels initValue);
 }  // namespace gpio
 
 #endif /* BSP_RPI_GPIO_GPIORPI_H_ */

hal/src/fsfw_hal/linux/spi/SpiComIF.cpp

@@ -401,4 +401,12 @@ void SpiComIF::setSpiSpeedAndMode(int spiFd, spi::SpiModes mode, uint32_t speed)
   if (retval != 0) {
     utility::handleIoctlError("SpiComIF::setSpiSpeedAndMode: Setting SPI speed failed");
   }
+  // This updates the SPI clock default polarity. Only setting the mode does not update
+  // the line state, which can be an issue on mode switches because the clock line will
+  // switch the state after the chip select is pulled low
+  clockUpdateTransfer.len = 0;
+  retval = ioctl(spiFd, SPI_IOC_MESSAGE(1), &clockUpdateTransfer);
+  if (retval != 0) {
+    utility::handleIoctlError("SpiComIF::setSpiSpeedAndMode: Updating SPI default clock failed");
+  }
 }

hal/src/fsfw_hal/linux/spi/SpiComIF.h

@@ -74,6 +74,7 @@ class SpiComIF : public DeviceCommunicationIF, public SystemObject {
   MutexIF* spiMutex = nullptr;
   MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING;
   uint32_t timeoutMs = 20;
+  spi_ioc_transfer clockUpdateTransfer = {};
 
   using SpiDeviceMap = std::unordered_map<address_t, SpiInstance>;
   using SpiDeviceMapIter = SpiDeviceMap::iterator;

hal/src/fsfw_hal/linux/spi/SpiCookie.cpp

@@ -1,4 +1,4 @@
-#include "fsfw_hal/linux/spi/SpiCookie.h"
+#include "SpiCookie.h"
 
 SpiCookie::SpiCookie(address_t spiAddress, gpioId_t chipSelect, std::string spiDev,
                      const size_t maxSize, spi::SpiModes spiMode, uint32_t spiSpeed)

hal/src/fsfw_hal/linux/uart/UartComIF.cpp

@@ -148,16 +148,16 @@ void UartComIF::setDatasizeOptions(struct termios* options, UartCookie* uartCook
   /* Clear size bits */
   options->c_cflag &= ~CSIZE;
   switch (uartCookie->getBitsPerWord()) {
-    case 5:
+    case BitsPerWord::BITS_5:
       options->c_cflag |= CS5;
       break;
-    case 6:
+    case BitsPerWord::BITS_6:
       options->c_cflag |= CS6;
       break;
-    case 7:
+    case BitsPerWord::BITS_7:
       options->c_cflag |= CS7;
       break;
-    case 8:
+    case BitsPerWord::BITS_8:
       options->c_cflag |= CS8;
       break;
     default:
@@ -193,82 +193,128 @@ void UartComIF::setFixedOptions(struct termios* options) {
 
 void UartComIF::configureBaudrate(struct termios* options, UartCookie* uartCookie) {
   switch (uartCookie->getBaudrate()) {
-    case 50:
+    case UartBaudRate::RATE_50:
       cfsetispeed(options, B50);
       cfsetospeed(options, B50);
       break;
-    case 75:
+    case UartBaudRate::RATE_75:
       cfsetispeed(options, B75);
       cfsetospeed(options, B75);
       break;
-    case 110:
+    case UartBaudRate::RATE_110:
       cfsetispeed(options, B110);
       cfsetospeed(options, B110);
       break;
-    case 134:
+    case UartBaudRate::RATE_134:
       cfsetispeed(options, B134);
       cfsetospeed(options, B134);
       break;
-    case 150:
+    case UartBaudRate::RATE_150:
       cfsetispeed(options, B150);
       cfsetospeed(options, B150);
       break;
-    case 200:
+    case UartBaudRate::RATE_200:
       cfsetispeed(options, B200);
       cfsetospeed(options, B200);
       break;
-    case 300:
+    case UartBaudRate::RATE_300:
       cfsetispeed(options, B300);
       cfsetospeed(options, B300);
       break;
-    case 600:
+    case UartBaudRate::RATE_600:
       cfsetispeed(options, B600);
       cfsetospeed(options, B600);
       break;
-    case 1200:
+    case UartBaudRate::RATE_1200:
       cfsetispeed(options, B1200);
       cfsetospeed(options, B1200);
       break;
-    case 1800:
+    case UartBaudRate::RATE_1800:
       cfsetispeed(options, B1800);
       cfsetospeed(options, B1800);
       break;
-    case 2400:
+    case UartBaudRate::RATE_2400:
       cfsetispeed(options, B2400);
       cfsetospeed(options, B2400);
       break;
-    case 4800:
+    case UartBaudRate::RATE_4800:
       cfsetispeed(options, B4800);
       cfsetospeed(options, B4800);
       break;
-    case 9600:
+    case UartBaudRate::RATE_9600:
       cfsetispeed(options, B9600);
       cfsetospeed(options, B9600);
       break;
-    case 19200:
+    case UartBaudRate::RATE_19200:
       cfsetispeed(options, B19200);
       cfsetospeed(options, B19200);
       break;
-    case 38400:
+    case UartBaudRate::RATE_38400:
       cfsetispeed(options, B38400);
       cfsetospeed(options, B38400);
       break;
-    case 57600:
+    case UartBaudRate::RATE_57600:
       cfsetispeed(options, B57600);
       cfsetospeed(options, B57600);
       break;
-    case 115200:
+    case UartBaudRate::RATE_115200:
       cfsetispeed(options, B115200);
       cfsetospeed(options, B115200);
       break;
-    case 230400:
+    case UartBaudRate::RATE_230400:
       cfsetispeed(options, B230400);
       cfsetospeed(options, B230400);
       break;
-    case 460800:
+#ifndef __APPLE__
+    case UartBaudRate::RATE_460800:
       cfsetispeed(options, B460800);
       cfsetospeed(options, B460800);
       break;
+    case UartBaudRate::RATE_500000:
+      cfsetispeed(options, B500000);
+      cfsetospeed(options, B500000);
+      break;
+    case UartBaudRate::RATE_576000:
+      cfsetispeed(options, B576000);
+      cfsetospeed(options, B576000);
+      break;
+    case UartBaudRate::RATE_921600:
+      cfsetispeed(options, B921600);
+      cfsetospeed(options, B921600);
+      break;
+    case UartBaudRate::RATE_1000000:
+      cfsetispeed(options, B1000000);
+      cfsetospeed(options, B1000000);
+      break;
+    case UartBaudRate::RATE_1152000:
+      cfsetispeed(options, B1152000);
+      cfsetospeed(options, B1152000);
+      break;
+    case UartBaudRate::RATE_1500000:
+      cfsetispeed(options, B1500000);
+      cfsetospeed(options, B1500000);
+      break;
+    case UartBaudRate::RATE_2000000:
+      cfsetispeed(options, B2000000);
+      cfsetospeed(options, B2000000);
+      break;
+    case UartBaudRate::RATE_2500000:
+      cfsetispeed(options, B2500000);
+      cfsetospeed(options, B2500000);
+      break;
+    case UartBaudRate::RATE_3000000:
+      cfsetispeed(options, B3000000);
+      cfsetospeed(options, B3000000);
+      break;
+    case UartBaudRate::RATE_3500000:
+      cfsetispeed(options, B3500000);
+      cfsetospeed(options, B3500000);
+      break;
+    case UartBaudRate::RATE_4000000:
+      cfsetispeed(options, B4000000);
+      cfsetospeed(options, B4000000);
+      break;
+#endif  // ! __APPLE__
     default:
 #if FSFW_CPP_OSTREAM_ENABLED == 1
       sif::warning << "UartComIF::configureBaudrate: Baudrate not supported" << std::endl;
@@ -427,7 +473,7 @@ ReturnValue_t UartComIF::handleNoncanonicalRead(UartCookie& uartCookie, UartDevi
   auto bufferPtr = iter->second.replyBuffer.data();
   // Size check to prevent buffer overflow
   if (requestLen > uartCookie.getMaxReplyLen()) {
-#if OBSW_VERBOSE_LEVEL >= 1
+#if FSFW_VERBOSE_LEVEL >= 1
 #if FSFW_CPP_OSTREAM_ENABLED == 1
     sif::warning << "UartComIF::requestReceiveMessage: Next read would cause overflow!"
                  << std::endl;

hal/src/fsfw_hal/linux/uart/UartCookie.cpp

@@ -1,9 +1,9 @@
-#include "fsfw_hal/linux/uart/UartCookie.h"
+#include "UartCookie.h"
 
 #include <fsfw/serviceinterface.h>
 
 UartCookie::UartCookie(object_id_t handlerId, std::string deviceFile, UartModes uartMode,
-                       uint32_t baudrate, size_t maxReplyLen)
+                       UartBaudRate baudrate, size_t maxReplyLen)
     : handlerId(handlerId),
       deviceFile(deviceFile),
       uartMode(uartMode),
@@ -12,7 +12,7 @@ UartCookie::UartCookie(object_id_t handlerId, std::string deviceFile, UartModes
 
 UartCookie::~UartCookie() {}
 
-uint32_t UartCookie::getBaudrate() const { return baudrate; }
+UartBaudRate UartCookie::getBaudrate() const { return baudrate; }
 
 size_t UartCookie::getMaxReplyLen() const { return maxReplyLen; }
 
@@ -24,23 +24,9 @@ void UartCookie::setParityEven() { parity = Parity::EVEN; }
 
 Parity UartCookie::getParity() const { return parity; }
 
-void UartCookie::setBitsPerWord(uint8_t bitsPerWord_) {
-  switch (bitsPerWord_) {
-    case 5:
-    case 6:
-    case 7:
-    case 8:
-      break;
-    default:
-#if FSFW_CPP_OSTREAM_ENABLED == 1
-      sif::debug << "UartCookie::setBitsPerWord: Invalid bits per word specified" << std::endl;
-#endif
-      return;
-  }
-  bitsPerWord = bitsPerWord_;
-}
+void UartCookie::setBitsPerWord(BitsPerWord bitsPerWord_) { bitsPerWord = bitsPerWord_; }
 
-uint8_t UartCookie::getBitsPerWord() const { return bitsPerWord; }
+BitsPerWord UartCookie::getBitsPerWord() const { return bitsPerWord; }
 
 StopBits UartCookie::getStopBits() const { return stopBits; }
 

hal/src/fsfw_hal/linux/uart/UartCookie.h

@@ -12,6 +12,41 @@ enum class StopBits { ONE_STOP_BIT, TWO_STOP_BITS };
 
 enum class UartModes { CANONICAL, NON_CANONICAL };
 
+enum class BitsPerWord { BITS_5, BITS_6, BITS_7, BITS_8 };
+
+enum class UartBaudRate {
+  RATE_50,
+  RATE_75,
+  RATE_110,
+  RATE_134,
+  RATE_150,
+  RATE_200,
+  RATE_300,
+  RATE_600,
+  RATE_1200,
+  RATE_1800,
+  RATE_2400,
+  RATE_4800,
+  RATE_9600,
+  RATE_19200,
+  RATE_38400,
+  RATE_57600,
+  RATE_115200,
+  RATE_230400,
+  RATE_460800,
+  RATE_500000,
+  RATE_576000,
+  RATE_921600,
+  RATE_1000000,
+  RATE_1152000,
+  RATE_1500000,
+  RATE_2000000,
+  RATE_2500000,
+  RATE_3000000,
+  RATE_3500000,
+  RATE_4000000
+};
+
 /**
  * @brief   Cookie for the UartComIF. There are many options available to configure the UART driver.
  *          The constructor only requests for common options like the baudrate. Other options can
@@ -27,25 +62,23 @@ class UartCookie : public CookieIF {
    * @param uartMode      Specify the UART mode. The canonical mode should be used if the
    *                      messages are separated by a delimited character like '\n'. See the
    *                      termios documentation for more information
-   * @param baudrate      The baudrate to use for input and output. Possible Baudrates are: 50,
-   *                      75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, B19200,
-   *                      38400, 57600, 115200, 230400, 460800
+   * @param baudrate      The baudrate to use for input and output.
    * @param maxReplyLen   The maximum size an object using this cookie expects
    * @details
    * Default configuration: No parity
    *                        8 databits (number of bits transfered with one uart frame)
    *                        One stop bit
    */
-  UartCookie(object_id_t handlerId, std::string deviceFile, UartModes uartMode, uint32_t baudrate,
-             size_t maxReplyLen);
+  UartCookie(object_id_t handlerId, std::string deviceFile, UartModes uartMode,
+             UartBaudRate baudrate, size_t maxReplyLen);
 
   virtual ~UartCookie();
 
-  uint32_t getBaudrate() const;
+  UartBaudRate getBaudrate() const;
   size_t getMaxReplyLen() const;
   std::string getDeviceFile() const;
   Parity getParity() const;
-  uint8_t getBitsPerWord() const;
+  BitsPerWord getBitsPerWord() const;
   StopBits getStopBits() const;
   UartModes getUartMode() const;
   object_id_t getHandlerId() const;
@@ -76,7 +109,7 @@ class UartCookie : public CookieIF {
   /**
    * Function two set number of bits per UART frame.
    */
-  void setBitsPerWord(uint8_t bitsPerWord_);
+  void setBitsPerWord(BitsPerWord bitsPerWord_);
 
   /**
    * Function to specify the number of stopbits.
@@ -97,10 +130,10 @@ class UartCookie : public CookieIF {
   std::string deviceFile;
   const UartModes uartMode;
   bool flushInput = false;
-  uint32_t baudrate;
+  UartBaudRate baudrate;
   size_t maxReplyLen = 0;
   Parity parity = Parity::NONE;
-  uint8_t bitsPerWord = 8;
+  BitsPerWord bitsPerWord = BitsPerWord::BITS_8;
   uint8_t readCycles = 1;
   StopBits stopBits = StopBits::ONE_STOP_BIT;
   bool replySizeFixed = true;

hal/src/fsfw_hal/linux/uio/CMakeLists.txt

@@ -0,0 +1,3 @@
+target_sources(${LIB_FSFW_NAME} PUBLIC
+	UioMapper.cpp
+)

hal/src/fsfw_hal/linux/uio/UioMapper.cpp

@@ -0,0 +1,86 @@
+#include "UioMapper.h"
+
+#include <fcntl.h>
+#include <unistd.h>
+
+#include <filesystem>
+#include <fstream>
+#include <sstream>
+
+#include "fsfw/serviceinterface.h"
+
+const char UioMapper::UIO_PATH_PREFIX[] = "/sys/class/uio/";
+const char UioMapper::MAP_SUBSTR[] = "/maps/map";
+const char UioMapper::SIZE_FILE_PATH[] = "/size";
+
+UioMapper::UioMapper(std::string uioFile, int mapNum) : uioFile(uioFile), mapNum(mapNum) {}
+
+UioMapper::~UioMapper() {}
+
+ReturnValue_t UioMapper::getMappedAdress(uint32_t** address, Permissions permissions) {
+  ReturnValue_t result = HasReturnvaluesIF::RETURN_OK;
+  int fd = open(uioFile.c_str(), O_RDWR);
+  if (fd < 1) {
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+    sif::error << "PtmeAxiConfig::initialize: Invalid UIO device file" << std::endl;
+#endif
+    return HasReturnvaluesIF::RETURN_FAILED;
+  }
+  size_t size = 0;
+  result = getMapSize(&size);
+  if (result != HasReturnvaluesIF::RETURN_OK) {
+    return result;
+  }
+  *address = static_cast<uint32_t*>(
+      mmap(NULL, size, static_cast<int>(permissions), MAP_SHARED, fd, mapNum * getpagesize()));
+
+  if (*address == MAP_FAILED) {
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+    sif::error << "UioMapper::getMappedAdress: Failed to map physical address of uio device "
+               << uioFile.c_str() << " and map" << static_cast<int>(mapNum) << std::endl;
+#endif
+    return HasReturnvaluesIF::RETURN_FAILED;
+  }
+  return HasReturnvaluesIF::RETURN_OK;
+}
+
+ReturnValue_t UioMapper::getMapSize(size_t* size) {
+  std::stringstream namestream;
+  namestream << UIO_PATH_PREFIX << uioFile.substr(5, std::string::npos) << MAP_SUBSTR << mapNum
+             << SIZE_FILE_PATH;
+  FILE* fp;
+  fp = fopen(namestream.str().c_str(), "r");
+  if (fp == nullptr) {
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+    sif::error << "UioMapper::getMapSize: Failed to open file " << namestream.str() << std::endl;
+#endif
+    return HasReturnvaluesIF::RETURN_FAILED;
+  }
+  char hexstring[SIZE_HEX_STRING] = "";
+  int items = fscanf(fp, "%s", hexstring);
+  if (items != 1) {
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+    sif::error << "UioMapper::getMapSize: Failed with error code " << errno
+               << " to read size "
+                  "string from file "
+               << namestream.str() << std::endl;
+#endif
+    fclose(fp);
+    return HasReturnvaluesIF::RETURN_FAILED;
+  }
+  uint32_t sizeTmp = 0;
+  items = sscanf(hexstring, "%x", &sizeTmp);
+  if (size != nullptr) {
+    *size = sizeTmp;
+  }
+  if (items != 1) {
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+    sif::error << "UioMapper::getMapSize: Failed with error code " << errno << "to convert "
+               << "size of map" << mapNum << " to integer" << std::endl;
+#endif
+    fclose(fp);
+    return HasReturnvaluesIF::RETURN_FAILED;
+  }
+  fclose(fp);
+  return HasReturnvaluesIF::RETURN_OK;
+}

hal/src/fsfw_hal/linux/uio/UioMapper.h

@@ -0,0 +1,58 @@
+#ifndef FSFW_HAL_SRC_FSFW_HAL_LINUX_UIO_UIOMAPPER_H_
+#define FSFW_HAL_SRC_FSFW_HAL_LINUX_UIO_UIOMAPPER_H_
+
+#include <sys/mman.h>
+
+#include <string>
+
+#include "fsfw/returnvalues/HasReturnvaluesIF.h"
+
+/**
+ * @brief   Class to help opening uio device files and mapping the physical addresses into the user
+ *          address space.
+ *
+ * @author  J. Meier
+ */
+class UioMapper {
+ public:
+  enum class Permissions : int {
+    READ_ONLY = PROT_READ,
+    WRITE_ONLY = PROT_WRITE,
+    READ_WRITE = PROT_READ | PROT_WRITE
+  };
+
+  /**
+   * @brief   Constructor
+   *
+   * @param uioFile   The device file of the uiO to open
+   * @param uioMap    Number of memory map. Most UIO drivers have only one map which has than 0.
+   */
+  UioMapper(std::string uioFile, int mapNum = 0);
+  virtual ~UioMapper();
+
+  /**
+   * @brief   Maps the physical address into user address space and returns the mapped address
+   *
+   * @address The mapped user space address
+   * @permissions Specifies the read/write permissions of the address region
+   */
+  ReturnValue_t getMappedAdress(uint32_t** address, Permissions permissions);
+
+ private:
+  static const char UIO_PATH_PREFIX[];
+  static const char MAP_SUBSTR[];
+  static const char SIZE_FILE_PATH[];
+  static constexpr int SIZE_HEX_STRING = 10;
+
+  std::string uioFile;
+  int mapNum = 0;
+
+  /**
+   * @brief   Reads the map size from the associated sysfs size file
+   *
+   * @param size  The read map size
+   */
+  ReturnValue_t getMapSize(size_t* size);
+};
+
+#endif /* FSFW_HAL_SRC_FSFW_HAL_LINUX_UIO_UIOMAPPER_H_ */

hal/src/fsfw_hal/stm32h7/spi/mspInit.h

@@ -21,7 +21,7 @@ using mspCb = void (*)(void);
 namespace spi {
 
 struct MspCfgBase {
-  MspCfgBase();
+  MspCfgBase() {}
   MspCfgBase(stm32h7::GpioCfg sck, stm32h7::GpioCfg mosi, stm32h7::GpioCfg miso,
              mspCb cleanupCb = nullptr, mspCb setupCb = nullptr)
       : sck(sck), mosi(mosi), miso(miso), cleanupCb(cleanupCb), setupCb(setupCb) {}

scripts/helper.py

@@ -97,11 +97,11 @@ def handle_docs_type(args, build_dir_list: list):
         build_directory = determine_build_dir(build_dir_list)
     os.chdir(build_directory)
     if args.build:
-        os.system("cmake --build . -j")
+        cmd_runner("cmake --build . -j")
     if args.open:
         if not os.path.isfile("docs/sphinx/index.html"):
             # try again..
-            os.system("cmake --build . -j")
+            cmd_runner("cmake --build . -j")
             if not os.path.isfile("docs/sphinx/index.html"):
                 print(
                     "No Sphinx documentation file detected. "
@@ -143,22 +143,21 @@ def handle_tests_type(args, build_dir_list: list):
         if which("valgrind") is None:
             print("Please install valgrind first")
             sys.exit(1)
-        os.chdir(UNITTEST_FOLDER_NAME)
-        os.system("valgrind --leak-check=full ./fsfw-tests")
+        cmd_runner("valgrind --leak-check=full ./fsfw-tests")
         os.chdir("..")
 
 
 def create_tests_build_cfg():
     os.mkdir(UNITTEST_FOLDER_NAME)
     os.chdir(UNITTEST_FOLDER_NAME)
-    os.system("cmake -DFSFW_OSAL=host -DFSFW_BUILD_UNITTESTS=ON ..")
+    cmd_runner("cmake -DFSFW_OSAL=host -DFSFW_BUILD_UNITTESTS=ON ..")
     os.chdir("..")
 
 
 def create_docs_build_cfg():
     os.mkdir(DOCS_FOLDER_NAME)
     os.chdir(DOCS_FOLDER_NAME)
-    os.system("cmake -DFSFW_OSAL=host -DFSFW_BUILD_DOCS=ON ..")
+    cmd_runner("cmake -DFSFW_OSAL=host -DFSFW_BUILD_DOCS=ON ..")
     os.chdir("..")
 
 
@@ -181,7 +180,7 @@ def check_for_cmake_build_dir(build_dir_list: list) -> list:
 def perform_lcov_operation(directory: str, chdir: bool):
     if chdir:
         os.chdir(directory)
-    os.system("cmake --build . -- fsfw-tests_coverage -j")
+    cmd_runner("cmake --build . -- fsfw-tests_coverage -j")
 
 
 def determine_build_dir(build_dir_list: List[str]):
@@ -203,5 +202,10 @@ def determine_build_dir(build_dir_list: List[str]):
     return build_directory
 
 
+def cmd_runner(cmd: str):
+    print(f"Executing command: {cmd}")
+    os.system(cmd)
+
+
 if __name__ == "__main__":
     main()

src/fsfw/CMakeLists.txt

@@ -1,3 +1,8 @@
+target_sources(${LIB_FSFW_NAME} PRIVATE
+    version.cpp
+    versionAutogen.cpp
+)
+
 # Core
 
 add_subdirectory(action)

src/fsfw/FSFW.h.in

@@ -30,6 +30,10 @@
 #define FSFW_VERBOSE_LEVEL                  1
 #endif /* FSFW_VERBOSE_LEVEL */
 
+#ifndef FSFW_DISABLE_PRINTOUT
+#define FSFW_DISABLE_PRINTOUT               0
+#endif
+
 #ifndef FSFW_USE_REALTIME_FOR_LINUX
 #define FSFW_USE_REALTIME_FOR_LINUX         0
 #endif /* FSFW_USE_REALTIME_FOR_LINUX */
@@ -57,16 +61,9 @@
 #define FSFW_HAL_SPI_WIRETAPPING            0
 #endif
 
-#ifndef FSFW_HAL_L3GD20_GYRO_DEBUG
-#define FSFW_HAL_L3GD20_GYRO_DEBUG          0
-#endif /* FSFW_HAL_L3GD20_GYRO_DEBUG */
-
-#ifndef FSFW_HAL_RM3100_MGM_DEBUG
-#define FSFW_HAL_RM3100_MGM_DEBUG           0
-#endif /* FSFW_HAL_RM3100_MGM_DEBUG */
-
-#ifndef FSFW_HAL_LIS3MDL_MGM_DEBUG
-#define FSFW_HAL_LIS3MDL_MGM_DEBUG          0
-#endif /* FSFW_HAL_LIS3MDL_MGM_DEBUG */
+// Can be used for low-level debugging of the I2C bus
+#ifndef FSFW_HAL_I2C_WIRETAPPING
+#define FSFW_HAL_I2C_WIRETAPPING            0
+#endif
 
 #endif /* FSFW_FSFW_H_ */

src/fsfw/FSFWVersion.h.in

@@ -1,9 +0,0 @@
-#ifndef FSFW_VERSION_H_
-#define FSFW_VERSION_H_
-
-// Versioning is kept in project CMakeLists.txt file
-#define FSFW_VERSION @FSFW_VERSION@
-#define FSFW_SUBVERSION @FSFW_SUBVERSION@
-#define FSFW_REVISION @FSFW_REVISION@
-
-#endif /* FSFW_VERSION_H_ */

src/fsfw/cfdp/pdu/HeaderSerializer.h

@@ -44,7 +44,7 @@ class HeaderSerializer : public SerializeIF, public PduHeaderIF {
   cfdp::WidthInBytes getLenEntityIds() const override;
   cfdp::WidthInBytes getLenSeqNum() const override;
   cfdp::SegmentMetadataFlag getSegmentMetadataFlag() const override;
-  bool hasSegmentMetadataFlag() const;
+  bool hasSegmentMetadataFlag() const override;
   void setSegmentationControl(cfdp::SegmentationControl);
 
   void getSourceId(cfdp::EntityId& sourceId) const override;

src/fsfw/cfdp/tlv/FilestoreTlvBase.h

@@ -6,10 +6,13 @@
 #include <fsfw/cfdp/tlv/Tlv.h>
 #include <fsfw/cfdp/tlv/TlvIF.h>
 #include <fsfw/serialize/SerializeIF.h>
+#include <fsfw/serviceinterface/ServiceInterface.h>
 
 #include <cstddef>
 #include <cstdint>
 
+#include "fsfw/FSFW.h"
+
 namespace cfdp {
 
 enum FilestoreActionCode {

src/fsfw/container/FixedArrayList.h

@@ -2,6 +2,7 @@
 #define FIXEDARRAYLIST_H_
 
 #include <cmath>
+#include <limits>
 
 #include "ArrayList.h"
 /**
@@ -9,10 +10,8 @@
  */
 template <typename T, size_t MAX_SIZE, typename count_t = uint8_t>
 class FixedArrayList : public ArrayList<T, count_t> {
-#if !defined(_MSC_VER)
-  static_assert(MAX_SIZE <= (std::pow(2, sizeof(count_t) * 8) - 1),
+  static_assert(MAX_SIZE <= std::numeric_limits<count_t>::max(),
                 "count_t is not large enough to hold MAX_SIZE");
-#endif
  private:
   T data[MAX_SIZE];
 

src/fsfw/container/HybridIterator.h

@@ -10,16 +10,23 @@ class HybridIterator : public LinkedElement<T>::Iterator, public ArrayList<T, co
   HybridIterator() {}
 
   HybridIterator(typename LinkedElement<T>::Iterator *iter)
-      : LinkedElement<T>::Iterator(*iter), value(iter->value), linked(true) {}
+      : LinkedElement<T>::Iterator(*iter), linked(true) {
+    if (iter != nullptr) {
+      value = iter->value;
+    }
+  }
 
-  HybridIterator(LinkedElement<T> *start)
-      : LinkedElement<T>::Iterator(start), value(start->value), linked(true) {}
+  HybridIterator(LinkedElement<T> *start) : LinkedElement<T>::Iterator(start), linked(true) {
+    if (start != nullptr) {
+      value = start->value;
+    }
+  }
 
   HybridIterator(typename ArrayList<T, count_t>::Iterator start,
                  typename ArrayList<T, count_t>::Iterator end)
       : ArrayList<T, count_t>::Iterator(start), value(start.value), linked(false), end(end.value) {
     if (value == this->end) {
-      value = NULL;
+      value = nullptr;
     }
   }
 

src/fsfw/controller/ControllerBase.h

@@ -1,7 +1,6 @@
 #ifndef FSFW_CONTROLLER_CONTROLLERBASE_H_
 #define FSFW_CONTROLLER_CONTROLLERBASE_H_
 
-#include "fsfw/datapool/HkSwitchHelper.h"
 #include "fsfw/health/HasHealthIF.h"
 #include "fsfw/health/HealthHelper.h"
 #include "fsfw/modes/HasModesIF.h"
@@ -56,7 +55,7 @@ class ControllerBase : public HasModesIF,
   virtual void performControlOperation() = 0;
 
   virtual ReturnValue_t checkModeCommand(Mode_t mode, Submode_t submode,
-                                         uint32_t *msToReachTheMode) = 0;
+                                         uint32_t *msToReachTheMode) override = 0;
 
   const object_id_t parentId;
 
@@ -81,9 +80,9 @@ class ControllerBase : public HasModesIF,
 
   /** Mode helpers */
   virtual void modeChanged(Mode_t mode, Submode_t submode);
-  virtual void startTransition(Mode_t mode, Submode_t submode);
-  virtual void getMode(Mode_t *mode, Submode_t *submode);
-  virtual void setToExternalControl();
+  virtual void startTransition(Mode_t mode, Submode_t submode) override;
+  virtual void getMode(Mode_t *mode, Submode_t *submode) override;
+  virtual void setToExternalControl() override;
   virtual void announceMode(bool recursive);
   /** HK helpers */
   virtual void changeHK(Mode_t mode, Submode_t submode, bool enable);

src/fsfw/datalinklayer/DataLinkLayer.h

@@ -30,7 +30,7 @@ class DataLinkLayer : public CCSDSReturnValuesIF {
   //! [EXPORT] : [COMMENT] A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0
   static const Event BIT_LOCK_LOST = MAKE_EVENT(3, severity::INFO);
   //	static const Event RF_CHAIN_LOST = MAKE_EVENT(4, severity::INFO); //!< The CCSDS Board
-  //detected that either bit lock or RF available or both are lost. No parameters.
+  // detected that either bit lock or RF available or both are lost. No parameters.
   //! [EXPORT] : [COMMENT] The CCSDS Board could not interpret a TC
   static const Event FRAME_PROCESSING_FAILED = MAKE_EVENT(5, severity::LOW);
   /**

src/fsfw/datalinklayer/VirtualChannelReception.cpp

@@ -30,9 +30,9 @@ ReturnValue_t VirtualChannelReception::mapDemultiplexing(TcTransferFrame* frame)
   mapChannelIterator iter = mapChannels.find(mapId);
   if (iter == mapChannels.end()) {
     //		error << "VirtualChannelReception::mapDemultiplexing on VC " << std::hex << (int)
-    //channelId
+    // channelId
     //				<< ": MapChannel " << (int) mapId << std::dec << " not found." <<
-    //std::endl;
+    // std::endl;
     return VC_NOT_FOUND;
   } else {
     return (iter->second)->extractPackets(frame);

src/fsfw/datapool/CMakeLists.txt

@@ -1,6 +1,4 @@
-target_sources(${LIB_FSFW_NAME} 
-	PRIVATE 
-		HkSwitchHelper.cpp
-		PoolDataSetBase.cpp
-		PoolEntry.cpp
+target_sources(${LIB_FSFW_NAME} PRIVATE
+	PoolDataSetBase.cpp
+	PoolEntry.cpp
 )

src/fsfw/datapool/HkSwitchHelper.cpp

@@ -1,67 +0,0 @@
-#include "fsfw/datapool/HkSwitchHelper.h"
-
-#include "fsfw/ipc/QueueFactory.h"
-
-HkSwitchHelper::HkSwitchHelper(EventReportingProxyIF* eventProxy)
-    : commandActionHelper(this), eventProxy(eventProxy) {
-  actionQueue = QueueFactory::instance()->createMessageQueue();
-}
-
-HkSwitchHelper::~HkSwitchHelper() { QueueFactory::instance()->deleteMessageQueue(actionQueue); }
-
-ReturnValue_t HkSwitchHelper::initialize() {
-  ReturnValue_t result = commandActionHelper.initialize();
-
-  if (result != HasReturnvaluesIF::RETURN_OK) {
-    return result;
-  }
-
-  return result;
-}
-
-ReturnValue_t HkSwitchHelper::performOperation(uint8_t operationCode) {
-  CommandMessage command;
-  while (actionQueue->receiveMessage(&command) == HasReturnvaluesIF::RETURN_OK) {
-    ReturnValue_t result = commandActionHelper.handleReply(&command);
-    if (result == HasReturnvaluesIF::RETURN_OK) {
-      continue;
-    }
-    command.setToUnknownCommand();
-    actionQueue->reply(&command);
-  }
-
-  return HasReturnvaluesIF::RETURN_OK;
-}
-
-void HkSwitchHelper::stepSuccessfulReceived(ActionId_t actionId, uint8_t step) {}
-
-void HkSwitchHelper::stepFailedReceived(ActionId_t actionId, uint8_t step,
-                                        ReturnValue_t returnCode) {
-  eventProxy->forwardEvent(SWITCHING_TM_FAILED, returnCode, actionId);
-}
-
-void HkSwitchHelper::dataReceived(ActionId_t actionId, const uint8_t* data, uint32_t size) {}
-
-void HkSwitchHelper::completionSuccessfulReceived(ActionId_t actionId) {}
-
-void HkSwitchHelper::completionFailedReceived(ActionId_t actionId, ReturnValue_t returnCode) {
-  eventProxy->forwardEvent(SWITCHING_TM_FAILED, returnCode, actionId);
-}
-
-ReturnValue_t HkSwitchHelper::switchHK(SerializeIF* sids, bool enable) {
-  //	ActionId_t action = HKService::DISABLE_HK;
-  //	if (enable) {
-  //		action = HKService::ENABLE_HK;
-  //	}
-  //
-  //	ReturnValue_t result = commandActionHelper.commandAction(
-  //			objects::PUS_HK_SERVICE, action, sids);
-  //
-  //	if (result != HasReturnvaluesIF::RETURN_OK) {
-  //		eventProxy->forwardEvent(SWITCHING_TM_FAILED, result);
-  //	}
-  //	return result;
-  return HasReturnvaluesIF::RETURN_OK;
-}
-
-MessageQueueIF* HkSwitchHelper::getCommandQueuePtr() { return actionQueue; }

src/fsfw/datapool/HkSwitchHelper.h

@@ -1,44 +0,0 @@
-#ifndef FRAMEWORK_DATAPOOL_HKSWITCHHELPER_H_
-#define FRAMEWORK_DATAPOOL_HKSWITCHHELPER_H_
-
-#include "fsfw/action/CommandsActionsIF.h"
-#include "fsfw/events/EventReportingProxyIF.h"
-#include "fsfw/tasks/ExecutableObjectIF.h"
-
-// TODO this class violations separation between mission and framework
-// but it is only a transitional solution until the Datapool is
-// implemented decentrally
-
-class HkSwitchHelper : public ExecutableObjectIF, public CommandsActionsIF {
- public:
-  static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::HK;
-  static const Event SWITCHING_TM_FAILED =
-      MAKE_EVENT(1, severity::LOW);  //!< Commanding the HK Service failed, p1: error code, p2
-                                     //!< action: 0 disable / 1 enable
-
-  HkSwitchHelper(EventReportingProxyIF* eventProxy);
-  virtual ~HkSwitchHelper();
-
-  ReturnValue_t initialize();
-
-  virtual ReturnValue_t performOperation(uint8_t operationCode = 0);
-
-  ReturnValue_t switchHK(SerializeIF* sids, bool enable);
-
-  virtual void setTaskIF(PeriodicTaskIF* task_){};
-
- protected:
-  virtual void stepSuccessfulReceived(ActionId_t actionId, uint8_t step);
-  virtual void stepFailedReceived(ActionId_t actionId, uint8_t step, ReturnValue_t returnCode);
-  virtual void dataReceived(ActionId_t actionId, const uint8_t* data, uint32_t size);
-  virtual void completionSuccessfulReceived(ActionId_t actionId);
-  virtual void completionFailedReceived(ActionId_t actionId, ReturnValue_t returnCode);
-  virtual MessageQueueIF* getCommandQueuePtr();
-
- private:
-  CommandActionHelper commandActionHelper;
-  MessageQueueIF* actionQueue;
-  EventReportingProxyIF* eventProxy;
-};
-
-#endif /* FRAMEWORK_DATAPOOL_HKSWITCHHELPER_H_ */

src/fsfw/datapool/PoolDataSetBase.h

@@ -109,7 +109,7 @@ class PoolDataSetBase : public PoolDataSetIF, public SerializeIF, public HasRetu
    */
   virtual ReturnValue_t unlockDataPool() override;
 
-  virtual uint16_t getFillCount() const;
+  virtual uint16_t getFillCount() const override;
 
   /* SerializeIF implementations */
   virtual ReturnValue_t serialize(uint8_t** buffer, size_t* size, const size_t maxSize,

src/fsfw/datapoollocal/LocalDataPoolManager.cpp

@@ -84,8 +84,8 @@ ReturnValue_t LocalDataPoolManager::initializeHousekeepingPoolEntriesOnce() {
     return result;
   }
 
-  printWarningOrError(sif::OutputTypes::OUT_WARNING, "initialize", HasReturnvaluesIF::RETURN_FAILED,
-                      "The map should only be initialized once");
+  printWarningOrError(sif::OutputTypes::OUT_WARNING, "initializeHousekeepingPoolEntriesOnce",
+                      HasReturnvaluesIF::RETURN_FAILED, "The map should only be initialized once");
   return HasReturnvaluesIF::RETURN_OK;
 }
 
@@ -787,6 +787,10 @@ ReturnValue_t LocalDataPoolManager::generateSetStructurePacket(sid_t sid, bool i
   // Serialize set packet into store.
   size_t size = 0;
   result = setPacket.serialize(&storePtr, &size, expectedSize, SerializeIF::Endianness::BIG);
+  if (result != HasReturnvaluesIF::RETURN_OK) {
+    ipcStore->deleteData(storeId);
+    return result;
+  }
   if (expectedSize != size) {
     printWarningOrError(sif::OutputTypes::OUT_WARNING, "generateSetStructurePacket",
                         HasReturnvaluesIF::RETURN_FAILED,
@@ -801,7 +805,10 @@ ReturnValue_t LocalDataPoolManager::generateSetStructurePacket(sid_t sid, bool i
     HousekeepingMessage::setHkStuctureReportReply(&reply, sid, storeId);
   }
 
-  hkQueue->reply(&reply);
+  result = hkQueue->reply(&reply);
+  if (result != HasReturnvaluesIF::RETURN_OK) {
+    ipcStore->deleteData(storeId);
+  }
   return result;
 }
 

src/fsfw/datapoollocal/LocalPoolDataSetBase.cpp

@@ -94,13 +94,14 @@ ReturnValue_t LocalPoolDataSetBase::serializeWithValidityBuffer(
   ReturnValue_t result = HasReturnvaluesIF::RETURN_OK;
   const uint8_t validityMaskSize = std::ceil(static_cast<float>(fillCount) / 8.0);
   uint8_t *validityPtr = nullptr;
-#ifdef _MSC_VER
-  /* Use a std::vector here because MSVC will (rightly) not create a fixed size array
-  with a non constant size specifier */
-  std::vector<uint8_t> validityMask(validityMaskSize);
+#if defined(_MSC_VER) || defined(__clang__)
+  // Use a std::vector here because MSVC will (rightly) not create a fixed size array
+  // with a non constant size specifier. The Apple compiler (LLVM) will not accept
+  // the  initialization of a variable sized array
+  std::vector<uint8_t> validityMask(validityMaskSize, 0);
   validityPtr = validityMask.data();
 #else
-  uint8_t validityMask[validityMaskSize] = {0};
+  uint8_t validityMask[validityMaskSize] = {};
   validityPtr = validityMask;
 #endif
   uint8_t validBufferIndex = 0;
@@ -291,3 +292,5 @@ float LocalPoolDataSetBase::getCollectionInterval() const {
     return 0.0;
   }
 }
+
+void LocalPoolDataSetBase::printSet() { return; }

src/fsfw/datapoollocal/LocalPoolDataSetBase.h

@@ -171,6 +171,11 @@ class LocalPoolDataSetBase : public PoolDataSetBase, public MarkChangedIF {
    */
   float getCollectionInterval() const;
 
+  /**
+   * @brief   Can be overwritten by a specific implementation of a dataset to print the set.
+   */
+  virtual void printSet();
+
  protected:
   sid_t sid;
   //! This mutex is used if the data is created by one object only.

src/fsfw/datapoollocal/LocalPoolObjectBase.cpp

@@ -47,13 +47,14 @@ LocalPoolObjectBase::LocalPoolObjectBase(object_id_t poolOwner, lp_id_t poolId,
   HasLocalDataPoolIF* hkOwner = ObjectManager::instance()->get<HasLocalDataPoolIF>(poolOwner);
   if (hkOwner == nullptr) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
-    sif::error << "LocalPoolVariable: The supplied pool owner did not implement the correct "
-                  "interface HasLocalDataPoolIF!"
-               << std::endl;
+    sif::error << "LocalPoolVariable: The supplied pool owner 0x" << std::hex << poolOwner
+               << std::dec << " did not implement the correct interface "
+               << "HasLocalDataPoolIF" << std::endl;
 #else
     sif::printError(
-        "LocalPoolVariable: The supplied pool owner did not implement the correct "
-        "interface HasLocalDataPoolIF!\n");
+        "LocalPoolVariable: The supplied pool owner 0x%08x did not implement the correct "
+        "interface HasLocalDataPoolIF\n",
+        poolOwner);
 #endif
     return;
   }

src/fsfw/datapoollocal/LocalPoolObjectBase.h

@@ -23,8 +23,8 @@ class LocalPoolObjectBase : public PoolVariableIF, public HasReturnvaluesIF, pub
   LocalPoolObjectBase(object_id_t poolOwner, lp_id_t poolId, DataSetIF* dataSet = nullptr,
                       pool_rwm_t setReadWriteMode = pool_rwm_t::VAR_READ_WRITE);
 
-  void setReadWriteMode(pool_rwm_t newReadWriteMode);
-  pool_rwm_t getReadWriteMode() const;
+  void setReadWriteMode(pool_rwm_t newReadWriteMode) override;
+  pool_rwm_t getReadWriteMode() const override;
 
   bool isValid() const override;
   void setValid(bool valid) override;

src/fsfw/datapoollocal/StaticLocalDataSet.h

@@ -46,7 +46,7 @@ class StaticLocalDataSet : public LocalPoolDataSetBase {
   }
 
  private:
-  std::array<PoolVariableIF*, NUM_VARIABLES> poolVarList;
+  std::array<PoolVariableIF*, NUM_VARIABLES> poolVarList = {};
 };
 
 #endif /* FSFW_DATAPOOLLOCAL_STATICLOCALDATASET_H_ */

src/fsfw/devicehandlers/DeviceHandlerBase.cpp

@@ -410,7 +410,7 @@ ReturnValue_t DeviceHandlerBase::insertInCommandAndReplyMap(
     DeviceCommandId_t deviceCommand, uint16_t maxDelayCycles, LocalPoolDataSetBase* replyDataSet,
     size_t replyLen, bool periodic, bool hasDifferentReplyId, DeviceCommandId_t replyId) {
   // No need to check, as we may try to insert multiple times.
-  insertInCommandMap(deviceCommand);
+  insertInCommandMap(deviceCommand, hasDifferentReplyId, replyId);
   if (hasDifferentReplyId) {
     return insertInReplyMap(replyId, maxDelayCycles, replyDataSet, replyLen, periodic);
   } else {
@@ -437,11 +437,15 @@ ReturnValue_t DeviceHandlerBase::insertInReplyMap(DeviceCommandId_t replyId,
   }
 }
 
-ReturnValue_t DeviceHandlerBase::insertInCommandMap(DeviceCommandId_t deviceCommand) {
+ReturnValue_t DeviceHandlerBase::insertInCommandMap(DeviceCommandId_t deviceCommand,
+                                                    bool useAlternativeReply,
+                                                    DeviceCommandId_t alternativeReplyId) {
   DeviceCommandInfo info;
   info.expectedReplies = 0;
   info.isExecuting = false;
   info.sendReplyTo = NO_COMMANDER;
+  info.useAlternativeReplyId = alternativeReplyId;
+  info.alternativeReplyId = alternativeReplyId;
   auto resultPair = deviceCommandMap.emplace(deviceCommand, info);
   if (resultPair.second) {
     return RETURN_OK;
@@ -451,12 +455,20 @@ ReturnValue_t DeviceHandlerBase::insertInCommandMap(DeviceCommandId_t deviceComm
 }
 
 size_t DeviceHandlerBase::getNextReplyLength(DeviceCommandId_t commandId) {
-  DeviceReplyIter iter = deviceReplyMap.find(commandId);
-  if (iter != deviceReplyMap.end()) {
-    return iter->second.replyLen;
+  DeviceCommandId_t replyId = NO_COMMAND_ID;
+  DeviceCommandMap::iterator command = cookieInfo.pendingCommand;
+  if (command->second.useAlternativeReplyId) {
+    replyId = command->second.alternativeReplyId;
   } else {
-    return 0;
+    replyId = commandId;
   }
+  DeviceReplyIter iter = deviceReplyMap.find(replyId);
+  if (iter != deviceReplyMap.end()) {
+    if (iter->second.delayCycles != 0) {
+      return iter->second.replyLen;
+    }
+  }
+  return 0;
 }
 
 ReturnValue_t DeviceHandlerBase::updateReplyMapEntry(DeviceCommandId_t deviceReply,
@@ -651,7 +663,9 @@ void DeviceHandlerBase::doGetWrite() {
 
     // We need to distinguish here, because a raw command never expects a reply.
     //(Could be done in eRIRM, but then child implementations need to be careful.
-    result = enableReplyInReplyMap(cookieInfo.pendingCommand);
+    DeviceCommandMap::iterator command = cookieInfo.pendingCommand;
+    result = enableReplyInReplyMap(command, 1, command->second.useAlternativeReplyId,
+                                   command->second.alternativeReplyId);
   } else {
     // always generate a failure event, so that FDIR knows what's up
     triggerEvent(DEVICE_SENDING_COMMAND_FAILED, result, cookieInfo.pendingCommand->first);
@@ -665,6 +679,11 @@ void DeviceHandlerBase::doGetWrite() {
 void DeviceHandlerBase::doSendRead() {
   ReturnValue_t result;
 
+  result = doSendReadHook();
+  if (result != RETURN_OK) {
+    return;
+  }
+
   size_t replyLen = 0;
   if (cookieInfo.pendingCommand != deviceCommandMap.end()) {
     replyLen = getNextReplyLength(cookieInfo.pendingCommand->first);
@@ -819,7 +838,7 @@ void DeviceHandlerBase::handleReply(const uint8_t* receivedData, DeviceCommandId
 }
 
 ReturnValue_t DeviceHandlerBase::getStorageData(store_address_t storageAddress, uint8_t** data,
-                                                uint32_t* len) {
+                                                size_t* len) {
   size_t lenTmp;
 
   if (IPCStore == nullptr) {
@@ -920,6 +939,8 @@ void DeviceHandlerBase::commandSwitch(ReturnValue_t onOff) {
   }
 }
 
+ReturnValue_t DeviceHandlerBase::doSendReadHook() { return RETURN_OK; }
+
 ReturnValue_t DeviceHandlerBase::getSwitches(const uint8_t** switches, uint8_t* numberOfSwitches) {
   return DeviceHandlerBase::NO_SWITCH;
 }

src/fsfw/devicehandlers/DeviceHandlerBase.h

@@ -163,7 +163,7 @@ class DeviceHandlerBase : public DeviceHandlerIF,
    * @param counter Specifies which Action to perform
    * @return RETURN_OK for successful execution
    */
-  virtual ReturnValue_t performOperation(uint8_t counter);
+  virtual ReturnValue_t performOperation(uint8_t counter) override;
 
   /**
    * @brief  Initializes the device handler
@@ -173,7 +173,7 @@ class DeviceHandlerBase : public DeviceHandlerIF,
    * Calls fillCommandAndReplyMap().
    * @return
    */
-  virtual ReturnValue_t initialize();
+  virtual ReturnValue_t initialize() override;
 
   /**
    * @brief   Intialization steps performed after all tasks have been created.
@@ -478,7 +478,9 @@ class DeviceHandlerBase : public DeviceHandlerIF,
    * @return - @c RETURN_OK when the command was successfully inserted,
    *         - @c RETURN_FAILED else.
    */
-  ReturnValue_t insertInCommandMap(DeviceCommandId_t deviceCommand);
+  ReturnValue_t insertInCommandMap(DeviceCommandId_t deviceCommand,
+                                   bool useAlternativeReply = false,
+                                   DeviceCommandId_t alternativeReplyId = 0);
 
   /**
    * Enables a periodic reply for a given command. It sets to delay cycles to the specified
@@ -673,7 +675,7 @@ class DeviceHandlerBase : public DeviceHandlerIF,
   //! Pointer to the raw packet that will be sent.
   uint8_t *rawPacket = nullptr;
   //! Size of the #rawPacket.
-  uint32_t rawPacketLen = 0;
+  size_t rawPacketLen = 0;
 
   /**
    * The mode the device handler is currently in.
@@ -751,6 +753,8 @@ class DeviceHandlerBase : public DeviceHandlerIF,
     //! if this is != NO_COMMANDER, DHB was commanded externally and shall
     //! report everything to commander.
     MessageQueueId_t sendReplyTo;
+    bool useAlternativeReplyId;
+    DeviceCommandId_t alternativeReplyId;
   };
   using DeviceCommandMap = std::map<DeviceCommandId_t, DeviceCommandInfo>;
   /**
@@ -1054,11 +1058,12 @@ class DeviceHandlerBase : public DeviceHandlerIF,
    * @param parameter1	Optional parameter 1
    * @param parameter2	Optional parameter 2
    */
-  void triggerEvent(Event event, uint32_t parameter1 = 0, uint32_t parameter2 = 0);
+  void triggerEvent(Event event, uint32_t parameter1 = 0, uint32_t parameter2 = 0) override;
   /**
    * Same as triggerEvent, but for forwarding if object is used as proxy.
    */
-  virtual void forwardEvent(Event event, uint32_t parameter1 = 0, uint32_t parameter2 = 0) const;
+  virtual void forwardEvent(Event event, uint32_t parameter1 = 0,
+                            uint32_t parameter2 = 0) const override;
 
   /**
    * Checks if current mode is transitional mode.
@@ -1082,6 +1087,12 @@ class DeviceHandlerBase : public DeviceHandlerIF,
    */
   void commandSwitch(ReturnValue_t onOff);
 
+  /**
+   * @brief   This function can be used to insert device specific code during the do-send-read
+   *          step.
+   */
+  virtual ReturnValue_t doSendReadHook();
+
  private:
   /**
    * State a cookie is in.
@@ -1244,7 +1255,7 @@ class DeviceHandlerBase : public DeviceHandlerIF,
    *   - @c RETURN_FAILED IPCStore is nullptr
    *   - the return value from the IPCStore if it was not @c RETURN_OK
    */
-  ReturnValue_t getStorageData(store_address_t storageAddress, uint8_t **data, uint32_t *len);
+  ReturnValue_t getStorageData(store_address_t storageAddress, uint8_t **data, size_t *len);
 
   /**
    * @param modeTo either @c MODE_ON, MODE_NORMAL or MODE_RAW, nothing else!

src/fsfw/events/Event.h

@@ -7,8 +7,14 @@
 // could be moved to more suitable location
 #include <events/subsystemIdRanges.h>
 
-typedef uint16_t EventId_t;
-typedef uint8_t EventSeverity_t;
+using EventId_t = uint16_t;
+using EventSeverity_t = uint8_t;
+using UniqueEventId_t = uint8_t;
+
+namespace severity {
+enum Severity : EventSeverity_t { INFO = 1, LOW = 2, MEDIUM = 3, HIGH = 4 };
+
+}  // namespace severity
 
 #define MAKE_EVENT(id, severity) (((severity) << 16) + (SUBSYSTEM_ID * 100) + (id))
 
@@ -20,18 +26,11 @@ constexpr EventId_t getEventId(Event event) { return (event & 0xFFFF); }
 
 constexpr EventSeverity_t getSeverity(Event event) { return ((event >> 16) & 0xFF); }
 
-constexpr Event makeEvent(uint8_t subsystemId, uint8_t uniqueEventId,
+constexpr Event makeEvent(uint8_t subsystemId, UniqueEventId_t uniqueEventId,
                           EventSeverity_t eventSeverity) {
   return (eventSeverity << 16) + (subsystemId * 100) + uniqueEventId;
 }
 
 }  // namespace event
 
-namespace severity {
-static constexpr EventSeverity_t INFO = 1;
-static constexpr EventSeverity_t LOW = 2;
-static constexpr EventSeverity_t MEDIUM = 3;
-static constexpr EventSeverity_t HIGH = 4;
-}  // namespace severity
-
 #endif /* EVENTOBJECT_EVENT_H_ */

src/fsfw/globalfunctions/CRC.cpp

@@ -28,7 +28,7 @@ const uint16_t CRC::crc16ccitt_table[256] = {
 
 // CRC implementation
 uint16_t CRC::crc16ccitt(uint8_t const input[], uint32_t length, uint16_t startingCrc) {
-  uint8_t *data = (uint8_t *)input;
+  const uint8_t *data = static_cast<const uint8_t *>(input);
   unsigned int tbl_idx;
 
   while (length--) {
@@ -39,88 +39,4 @@ uint16_t CRC::crc16ccitt(uint8_t const input[], uint32_t length, uint16_t starti
   }
   return startingCrc & 0xffff;
 
-  // The part below is not used!
-  //	bool temr[16];
-  //	bool xor_out[16];
-  //	bool r[16];
-  //	bool d[8];
-  //	uint16_t crc_value = 0;
-  //
-  //
-  //	for (int i=0; i<16 ;i++) {
-  //		temr[i] = false;
-  //		xor_out[i] = false;
-  //	}
-  //
-  //
-  //	for (int i=0; i<16 ;i++)
-  //			r[i] = true;    // initialize with 0xFFFF
-  //
-  //
-  //
-  //	for (int j=0; j<length ;j++)
-  //	{
-  //
-  //	for (int i=0; i<8 ;i++)
-  //		if ((input[j] & 1<<i) == 1<<i)
-  //			d[7-i]=true;			// reverse   input data
-  //		else
-  //			d[7-i]=false;			// reverse input data
-  //
-  //
-  //
-  //		  temr[0] = d[4] ^ d[0];
-  //		  temr[1] = d[5] ^ d[1];
-  //		  temr[2] = d[6] ^ d[2];
-  //		  temr[3] = d[7] ^ d[3];
-  //		  temr[4] = r[12] ^ r[8];
-  //		  temr[5] = r[13] ^ r[9];
-  //		  temr[6] = r[14] ^ r[10];
-  //		  temr[7] = r[15] ^ r[11];
-  //		  temr[8] = d[4] ^ r[12];
-  //		  temr[9] = d[5] ^ r[13];
-  //		  temr[10] = d[6] ^ r[14];
-  //		  temr[11] = d[7] ^ r[15];
-  //		  temr[12] = temr[0] ^ temr[4];
-  //		  temr[13] = temr[1] ^ temr[5];
-  //		  temr[14] = temr[2] ^ temr[6];
-  //		  temr[15] = temr[3] ^ temr[7];
-  //
-  //
-  //		  xor_out[0] = temr[12];
-  //		  xor_out[1] = temr[13];
-  //		  xor_out[2] = temr[14];
-  //		  xor_out[3] = temr[15];
-  //		  xor_out[4] = temr[8];
-  //		  xor_out[5] = temr[9] ^ temr[12];
-  //		  xor_out[6] = temr[10] ^ temr[13];
-  //		  xor_out[7] = temr[11] ^ temr[14];
-  //		  xor_out[8] = temr[15] ^ r[0];
-  //		  xor_out[9] = temr[8] ^ r[1];
-  //		  xor_out[10] = temr[9] ^ r[2];
-  //		  xor_out[11] = temr[10] ^ r[3];
-  //		  xor_out[12] = temr[11] ^ temr[12] ^ r[4];
-  //		  xor_out[13] = temr[13] ^ r[5];
-  //		  xor_out[14] = temr[14] ^ r[6];
-  //		  xor_out[15] = temr[15] ^ r[7];
-  //
-  //	 for (int i=0; i<16 ;i++)
-  //	 {
-  //		  r[i]= xor_out[i] ;
-  //	 }
-  //
-  //	}
-  //
-  //
-  //
-  //	for (int i=0; i<16 ;i++)
-  //	{
-  //		 if  (xor_out[i] == true)
-  //			 crc_value = crc_value + pow(2,(15 -i));   // reverse CrC result before Final
-  //XOR
-  //	}
-  //
-  //	crc_value = 0;// for debug mode
-  //	return (crc_value);
-
 } /* Calculate_CRC() */

src/fsfw/globalfunctions/arrayprinter.cpp

@@ -1,6 +1,7 @@
 #include "fsfw/globalfunctions/arrayprinter.h"
 
 #include <bitset>
+#include <cmath>
 
 #include "fsfw/serviceinterface/ServiceInterface.h"
 
@@ -68,7 +69,7 @@ void arrayprinter::printHex(const uint8_t *data, size_t size, size_t maxCharPerL
     currentPos += snprintf(printBuffer + currentPos, 6, "%02x", data[i]);
     if (i < size - 1) {
       currentPos += sprintf(printBuffer + currentPos, ",");
-      if (i > 0 and (i + 1) % maxCharPerLine == 0) {
+      if ((i + 1) % maxCharPerLine == 0) {
         currentPos += sprintf(printBuffer + currentPos, "\n");
       }
     }
@@ -97,20 +98,21 @@ void arrayprinter::printDec(const uint8_t *data, size_t size, size_t maxCharPerL
   }
   std::cout << "]" << std::endl;
 #else
-  // General format: 32, 243, -12 so it is number of chars times 5
+  // General format: 32,243,-12 so it is number of chars times 4
   // plus line break plus small safety margin.
-  char printBuffer[(size + 1) * 5 + 1] = {};
+  uint16_t expectedLines = ceil((double)size / maxCharPerLine);
+  char printBuffer[size * 4 + 1 + expectedLines] = {};
   size_t currentPos = 0;
   for (size_t i = 0; i < size; i++) {
     // To avoid buffer overflows.
-    if (sizeof(printBuffer) - currentPos <= 5) {
+    if (sizeof(printBuffer) - currentPos <= 4) {
       break;
     }
 
-    currentPos += snprintf(printBuffer + currentPos, 3, "%d", data[i]);
+    currentPos += snprintf(printBuffer + currentPos, 4, "%d", data[i]);
     if (i < size - 1) {
       currentPos += sprintf(printBuffer + currentPos, ",");
-      if (i > 0 and (i + 1) % maxCharPerLine == 0) {
+      if ((i + 1) % maxCharPerLine == 0) {
         currentPos += sprintf(printBuffer + currentPos, "\n");
       }
     }

src/fsfw/globalfunctions/matching/MatchTree.h

@@ -25,7 +25,7 @@ class MatchTree : public SerializeableMatcherIF<T>, public BinaryTree<Serializea
       : BinaryTree<SerializeableMatcherIF<T>>(root.element), maxDepth(maxDepth) {}
   MatchTree() : BinaryTree<SerializeableMatcherIF<T>>(), maxDepth(-1) {}
   virtual ~MatchTree() {}
-  virtual bool match(T number) { return matchesTree(number); }
+  virtual bool match(T number) override { return matchesTree(number); }
   bool matchesTree(T number) {
     iterator iter = this->begin();
     if (iter == this->end()) {
@@ -179,6 +179,9 @@ class MatchTree : public SerializeableMatcherIF<T>, public BinaryTree<Serializea
   virtual ReturnValue_t cleanUpElement(iterator position) { return HasReturnvaluesIF::RETURN_OK; }
 
   bool matchSubtree(iterator iter, T number) {
+    if (iter == nullptr) {
+      return false;
+    }
     bool isMatch = iter->match(number);
     if (isMatch) {
       if (iter.left() == this->end()) {

src/fsfw/globalfunctions/matching/RangeMatcher.h

@@ -15,7 +15,7 @@ class RangeMatcher : public SerializeableMatcherIF<T> {
   RangeMatcher(T lowerBound, T upperBound, bool inverted = false)
       : inverted(inverted), lowerBound(lowerBound), upperBound(upperBound) {}
 
-  bool match(T input) {
+  bool match(T input) override {
     if (inverted) {
       return !doMatch(input);
     } else {

src/fsfw/internalerror/InternalErrorReporter.cpp

@@ -57,6 +57,9 @@ ReturnValue_t InternalErrorReporter::performOperation(uint8_t opCode) {
       internalErrorDataset.storeHits.value += newStoreHits;
       internalErrorDataset.tmHits.value += newTmHits;
       internalErrorDataset.setValidity(true, true);
+      if ((newQueueHits != 0) or (newStoreHits != 0) or (newTmHits != 0)) {
+        internalErrorDataset.setChanged(true);
+      }
     }
   }
 
@@ -77,14 +80,6 @@ uint32_t InternalErrorReporter::getAndResetQueueHits() {
   return value;
 }
 
-uint32_t InternalErrorReporter::getQueueHits() {
-  uint32_t value;
-  mutex->lockMutex(timeoutType, timeoutMs);
-  value = queueHits;
-  mutex->unlockMutex();
-  return value;
-}
-
 void InternalErrorReporter::incrementQueueHits() {
   mutex->lockMutex(timeoutType, timeoutMs);
   queueHits++;
@@ -100,14 +95,6 @@ uint32_t InternalErrorReporter::getAndResetTmHits() {
   return value;
 }
 
-uint32_t InternalErrorReporter::getTmHits() {
-  uint32_t value;
-  mutex->lockMutex(timeoutType, timeoutMs);
-  value = tmHits;
-  mutex->unlockMutex();
-  return value;
-}
-
 void InternalErrorReporter::incrementTmHits() {
   mutex->lockMutex(timeoutType, timeoutMs);
   tmHits++;
@@ -125,14 +112,6 @@ uint32_t InternalErrorReporter::getAndResetStoreHits() {
   return value;
 }
 
-uint32_t InternalErrorReporter::getStoreHits() {
-  uint32_t value;
-  mutex->lockMutex(timeoutType, timeoutMs);
-  value = storeHits;
-  mutex->unlockMutex();
-  return value;
-}
-
 void InternalErrorReporter::incrementStoreHits() {
   mutex->lockMutex(timeoutType, timeoutMs);
   storeHits++;

src/fsfw/internalerror/InternalErrorReporter.h

@@ -46,11 +46,11 @@ class InternalErrorReporter : public SystemObject,
   virtual ReturnValue_t initializeAfterTaskCreation() override;
   virtual ReturnValue_t performOperation(uint8_t opCode) override;
 
-  virtual void queueMessageNotSent();
+  virtual void queueMessageNotSent() override;
 
-  virtual void lostTm();
+  virtual void lostTm() override;
 
-  virtual void storeFull();
+  virtual void storeFull() override;
 
   virtual void setTaskIF(PeriodicTaskIF* task) override;
 
@@ -74,15 +74,12 @@ class InternalErrorReporter : public SystemObject,
   uint32_t storeHits = 0;
 
   uint32_t getAndResetQueueHits();
-  uint32_t getQueueHits();
   void incrementQueueHits();
 
   uint32_t getAndResetTmHits();
-  uint32_t getTmHits();
   void incrementTmHits();
 
   uint32_t getAndResetStoreHits();
-  uint32_t getStoreHits();
   void incrementStoreHits();
 };
 

src/fsfw/internalerror/InternalErrorReporterIF.h

@@ -1,22 +1,34 @@
 #ifndef INTERNALERRORREPORTERIF_H_
 #define INTERNALERRORREPORTERIF_H_
 
+/**
+ * @brief   Interface which is used to report internal errors like full message queues or stores.
+ * @details
+ * This interface smust be used for the InteralErrorReporter object.
+ * It should be used to indicate that there was a Problem with Queues or Stores.
+ *
+ * It can be used to report missing Telemetry which could not be sent due to a internal problem.
+ *
+ */
 class InternalErrorReporterIF {
  public:
   virtual ~InternalErrorReporterIF() {}
-
   /**
-   * Thread safe
+   * @brief Function to be called if a message queue could not be sent.
+   * @details OSAL Implementations should call this function to indicate that
+   * a message was lost.
+   *
+   *  Implementations are required to be Thread safe
    */
   virtual void queueMessageNotSent() = 0;
-
   /**
-   * Thread safe
+   * @brief Function to be called if Telemetry could not be sent
+   * @details Implementations must be Thread safe
    */
   virtual void lostTm() = 0;
-
   /**
-   * Thread safe
+   * @brief Function to be called if a onboard storage is full
+   * @details Implementations must be Thread safe
    */
   virtual void storeFull() = 0;
 };

src/fsfw/ipc/CMakeLists.txt

@@ -1,6 +1,6 @@
-target_sources(${LIB_FSFW_NAME} 
-	PRIVATE 
-		CommandMessage.cpp
-		CommandMessageCleaner.cpp
-		MessageQueueMessage.cpp
+target_sources(${LIB_FSFW_NAME} PRIVATE
+    CommandMessage.cpp
+    CommandMessageCleaner.cpp
+    MessageQueueMessage.cpp
+    MessageQueueBase.cpp
 )

src/fsfw/ipc/MessageQueueBase.cpp

@@ -0,0 +1,54 @@
+#include "MessageQueueBase.h"
+
+MessageQueueBase::MessageQueueBase(MessageQueueId_t id, MessageQueueId_t defaultDest, MqArgs* args)
+    : id(id) {
+  this->defaultDest = defaultDest;
+  if (args != nullptr) {
+    this->args = *args;
+  }
+}
+
+MessageQueueBase::~MessageQueueBase() {}
+
+ReturnValue_t MessageQueueBase::sendToDefault(MessageQueueMessageIF* message) {
+  return sendToDefaultFrom(message, this->getId(), false);
+}
+
+ReturnValue_t MessageQueueBase::reply(MessageQueueMessageIF* message) {
+  if (this->last != MessageQueueIF::NO_QUEUE) {
+    return sendMessageFrom(this->last, message, this->getId());
+  } else {
+    return NO_REPLY_PARTNER;
+  }
+}
+
+ReturnValue_t MessageQueueBase::receiveMessage(MessageQueueMessageIF* message,
+                                               MessageQueueId_t* receivedFrom) {
+  ReturnValue_t status = this->receiveMessage(message);
+  *receivedFrom = this->last;
+  return status;
+}
+
+MessageQueueId_t MessageQueueBase::getLastPartner() const { return last; }
+
+MessageQueueId_t MessageQueueBase::getId() const { return id; }
+
+MqArgs& MessageQueueBase::getMqArgs() { return args; }
+
+void MessageQueueBase::setDefaultDestination(MessageQueueId_t defaultDestination) {
+  this->defaultDest = defaultDestination;
+}
+
+MessageQueueId_t MessageQueueBase::getDefaultDestination() const { return defaultDest; }
+
+bool MessageQueueBase::isDefaultDestinationSet() const { return (defaultDest != NO_QUEUE); }
+
+ReturnValue_t MessageQueueBase::sendMessage(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
+                                            bool ignoreFault) {
+  return sendMessageFrom(sendTo, message, this->getId(), false);
+}
+
+ReturnValue_t MessageQueueBase::sendToDefaultFrom(MessageQueueMessageIF* message,
+                                                  MessageQueueId_t sentFrom, bool ignoreFault) {
+  return sendMessageFrom(defaultDest, message, sentFrom, ignoreFault);
+}

src/fsfw/ipc/MessageQueueBase.h

@@ -0,0 +1,40 @@
+#ifndef FSFW_SRC_FSFW_IPC_MESSAGEQUEUEBASE_H_
+#define FSFW_SRC_FSFW_IPC_MESSAGEQUEUEBASE_H_
+
+#include <fsfw/ipc/MessageQueueIF.h>
+#include <fsfw/ipc/definitions.h>
+
+class MessageQueueBase : public MessageQueueIF {
+ public:
+  MessageQueueBase(MessageQueueId_t id, MessageQueueId_t defaultDest, MqArgs* mqArgs);
+  virtual ~MessageQueueBase();
+
+  // Default implementations for MessageQueueIF where possible
+  virtual MessageQueueId_t getLastPartner() const override;
+  virtual MessageQueueId_t getId() const override;
+  virtual MqArgs& getMqArgs() override;
+  virtual void setDefaultDestination(MessageQueueId_t defaultDestination) override;
+  virtual MessageQueueId_t getDefaultDestination() const override;
+  virtual bool isDefaultDestinationSet() const override;
+  virtual ReturnValue_t sendMessage(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
+                                    bool ignoreFault) override;
+  virtual ReturnValue_t sendToDefault(MessageQueueMessageIF* message) override;
+  virtual ReturnValue_t reply(MessageQueueMessageIF* message) override;
+  virtual ReturnValue_t receiveMessage(MessageQueueMessageIF* message,
+                                       MessageQueueId_t* receivedFrom) override;
+  virtual ReturnValue_t sendToDefaultFrom(MessageQueueMessageIF* message, MessageQueueId_t sentFrom,
+                                          bool ignoreFault = false) override;
+
+  // OSAL specific, forward the abstract function
+  virtual ReturnValue_t receiveMessage(MessageQueueMessageIF* message) = 0;
+  virtual ReturnValue_t sendMessageFrom(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
+                                        MessageQueueId_t sentFrom, bool ignoreFault = false) = 0;
+
+ protected:
+  MessageQueueId_t id = MessageQueueIF::NO_QUEUE;
+  MessageQueueId_t last = MessageQueueIF::NO_QUEUE;
+  MessageQueueId_t defaultDest = MessageQueueIF::NO_QUEUE;
+  MqArgs args = {};
+};
+
+#endif /* FSFW_SRC_FSFW_IPC_MESSAGEQUEUEBASE_H_ */

src/fsfw/ipc/MessageQueueIF.h

@@ -1,6 +1,8 @@
 #ifndef FSFW_IPC_MESSAGEQUEUEIF_H_
 #define FSFW_IPC_MESSAGEQUEUEIF_H_
 
+#include <fsfw/ipc/definitions.h>
+
 #include <cstdint>
 
 #include "../returnvalues/HasReturnvaluesIF.h"
@@ -44,8 +46,8 @@ class MessageQueueIF {
   virtual ReturnValue_t reply(MessageQueueMessageIF* message) = 0;
 
   /**
-   * @brief	This function reads available messages from the message queue
-   *          and returns the sender.
+   * @brief	This function reads available messages from the message queue and returns the
+   * sender.
    * @details
    * It works identically to the other receiveMessage call, but in addition
    * returns the sender's queue id.
@@ -78,19 +80,16 @@ class MessageQueueIF {
    */
   virtual ReturnValue_t flush(uint32_t* count) = 0;
   /**
-   * @brief	This method returns the message queue
-   *          id of the last communication partner.
+   * @brief	This method returns the message queue ID of the last communication partner.
    */
   virtual MessageQueueId_t getLastPartner() const = 0;
   /**
-   * @brief	This method returns the message queue
-   *          id of this class's message queue.
+   * @brief	This method returns the message queue ID  of this class's message queue.
    */
   virtual MessageQueueId_t getId() const = 0;
 
   /**
-   * @brief	With the sendMessage call, a queue message
-   *          is sent to a receiving queue.
+   * @brief	With the sendMessage call, a queue message is sent to a receiving queue.
    * @details
    * This method takes the message provided, adds the sentFrom information
    * and passes it on to the destination provided with an operating system
@@ -129,8 +128,7 @@ class MessageQueueIF {
                                     bool ignoreFault = false) = 0;
 
   /**
-   * @brief	The sendToDefaultFrom method sends a queue message
-   *          to the default destination.
+   * @brief	The sendToDefaultFrom method sends a queue message to the default destination.
    * @details
    * In all other aspects, it works identical to the sendMessage method.
    * @param message
@@ -164,6 +162,8 @@ class MessageQueueIF {
   virtual MessageQueueId_t getDefaultDestination() const = 0;
 
   virtual bool isDefaultDestinationSet() const = 0;
+
+  virtual MqArgs& getMqArgs() = 0;
 };
 
 #endif /* FSFW_IPC_MESSAGEQUEUEIF_H_ */

src/fsfw/ipc/QueueFactory.h

@@ -5,6 +5,7 @@
 
 #include "MessageQueueIF.h"
 #include "MessageQueueMessage.h"
+#include "definitions.h"
 
 /**
  * Creates message queues.
@@ -22,7 +23,8 @@ class QueueFactory {
   static QueueFactory* instance();
 
   MessageQueueIF* createMessageQueue(uint32_t messageDepth = 3,
-                                     size_t maxMessageSize = MessageQueueMessage::MAX_MESSAGE_SIZE);
+                                     size_t maxMessageSize = MessageQueueMessage::MAX_MESSAGE_SIZE,
+                                     MqArgs* args = nullptr);
 
   void deleteMessageQueue(MessageQueueIF* queue);
 

src/fsfw/ipc/definitions.h

@@ -0,0 +1,14 @@
+#ifndef FSFW_SRC_FSFW_IPC_DEFINITIONS_H_
+#define FSFW_SRC_FSFW_IPC_DEFINITIONS_H_
+
+#include <fsfw/objectmanager/SystemObjectIF.h>
+#include <fsfw/objectmanager/frameworkObjects.h>
+
+struct MqArgs {
+  MqArgs(){};
+  MqArgs(object_id_t objectId, void* args = nullptr) : objectId(objectId), args(args) {}
+  object_id_t objectId = objects::NO_OBJECT;
+  void* args = nullptr;
+};
+
+#endif /* FSFW_SRC_FSFW_IPC_DEFINITIONS_H_ */

src/fsfw/modes/ModeMessage.h

@@ -14,30 +14,30 @@ class ModeMessage {
   static const uint8_t MESSAGE_ID = messagetypes::MODE_COMMAND;
   static const Command_t CMD_MODE_COMMAND =
       MAKE_COMMAND_ID(0x01);  //!> Command to set the specified Mode, replies are: REPLY_MODE_REPLY,
-                              //!REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any replies,
-                              //!as this will break the subsystem mode machine!!
+                              //! REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any replies,
+                              //! as this will break the subsystem mode machine!!
   static const Command_t CMD_MODE_COMMAND_FORCED = MAKE_COMMAND_ID(
       0xF1);  //!> Command to set the specified Mode, regardless of external control flag, replies
-              //!are: REPLY_MODE_REPLY, REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any
-              //!replies, as this will break the subsystem mode machine!!
+              //! are: REPLY_MODE_REPLY, REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any
+              //! replies, as this will break the subsystem mode machine!!
   static const Command_t REPLY_MODE_REPLY =
       MAKE_COMMAND_ID(0x02);  //!> Reply to a CMD_MODE_COMMAND or CMD_MODE_READ
   static const Command_t REPLY_MODE_INFO =
       MAKE_COMMAND_ID(0x03);  //!> Unrequested info about the current mode (used for composites to
-                              //!inform their container of a changed mode)
+                              //! inform their container of a changed mode)
   static const Command_t REPLY_CANT_REACH_MODE = MAKE_COMMAND_ID(
       0x04);  //!> Reply in case a mode command can't be executed. Par1: returnCode, Par2: 0
   static const Command_t REPLY_WRONG_MODE_REPLY =
       MAKE_COMMAND_ID(0x05);  //!> Reply to a CMD_MODE_COMMAND, indicating that a mode was commanded
-                              //!and a transition started but was aborted; the parameters contain
-                              //!the mode that was reached
+                              //! and a transition started but was aborted; the parameters contain
+                              //! the mode that was reached
   static const Command_t CMD_MODE_READ = MAKE_COMMAND_ID(
       0x06);  //!> Command to read the current mode and reply with a REPLY_MODE_REPLY
   static const Command_t CMD_MODE_ANNOUNCE = MAKE_COMMAND_ID(
       0x07);  //!> Command to trigger an ModeInfo Event. This command does NOT have a reply.
   static const Command_t CMD_MODE_ANNOUNCE_RECURSIVELY =
       MAKE_COMMAND_ID(0x08);  //!> Command to trigger an ModeInfo Event and to send this command to
-                              //!every child. This command does NOT have a reply.
+                              //! every child. This command does NOT have a reply.
 
   static Mode_t getMode(const CommandMessage* message);
   static Submode_t getSubmode(const CommandMessage* message);

src/fsfw/monitoring/MonitoringMessageContent.h

@@ -34,7 +34,7 @@ class MonitoringReportContent : public SerialLinkedListAdapter<SerializeIF> {
   SerializeElement<T> limitValue;
   SerializeElement<ReturnValue_t> oldState;
   SerializeElement<ReturnValue_t> newState;
-  uint8_t rawTimestamp[TimeStamperIF::MISSION_TIMESTAMP_SIZE];
+  uint8_t rawTimestamp[TimeStamperIF::MISSION_TIMESTAMP_SIZE] = {};
   SerializeElement<SerialBufferAdapter<uint8_t>> timestampSerializer;
   TimeStamperIF* timeStamper;
   MonitoringReportContent()
@@ -46,7 +46,6 @@ class MonitoringReportContent : public SerialLinkedListAdapter<SerializeIF> {
         limitValue(0),
         oldState(0),
         newState(0),
-        rawTimestamp({0}),
         timestampSerializer(rawTimestamp, sizeof(rawTimestamp)),
         timeStamper(NULL) {
     setAllNext();

src/fsfw/objectmanager/SystemObject.h

@@ -48,9 +48,10 @@ class SystemObject : public SystemObjectIF {
   virtual ~SystemObject();
   object_id_t getObjectId() const override;
   virtual ReturnValue_t initialize() override;
-  virtual ReturnValue_t checkObjectConnections();
+  virtual ReturnValue_t checkObjectConnections() override;
 
-  virtual void forwardEvent(Event event, uint32_t parameter1 = 0, uint32_t parameter2 = 0) const;
+  virtual void forwardEvent(Event event, uint32_t parameter1 = 0,
+                            uint32_t parameter2 = 0) const override;
 };
 
 #endif /* FSFW_OBJECTMANAGER_SYSTEMOBJECT_H_ */

src/fsfw/osal/common/TcpTmTcServer.cpp

@@ -19,6 +19,8 @@
 #include <ws2tcpip.h>
 #elif defined(PLATFORM_UNIX)
 #include <netdb.h>
+
+#include <utility>
 #endif
 
 const std::string TcpTmTcServer::DEFAULT_SERVER_PORT = tcpip::DEFAULT_SERVER_PORT;
@@ -29,7 +31,7 @@ TcpTmTcServer::TcpTmTcServer(object_id_t objectId, object_id_t tmtcTcpBridge,
     : SystemObject(objectId),
       tmtcBridgeId(tmtcTcpBridge),
       receptionMode(receptionMode),
-      tcpConfig(customTcpServerPort),
+      tcpConfig(std::move(customTcpServerPort)),
       receptionBuffer(receptionBufferSize),
       ringBuffer(ringBufferSize, true) {}
 
@@ -103,7 +105,7 @@ ReturnValue_t TcpTmTcServer::initialize() {
 
 TcpTmTcServer::~TcpTmTcServer() { closeSocket(listenerTcpSocket); }
 
-ReturnValue_t TcpTmTcServer::performOperation(uint8_t opCode) {
+[[noreturn]] ReturnValue_t TcpTmTcServer::performOperation(uint8_t opCode) {
   using namespace tcpip;
   // If a connection is accepted, the corresponding socket will be assigned to the new socket
   socket_t connSocket = 0;
@@ -138,7 +140,6 @@ ReturnValue_t TcpTmTcServer::performOperation(uint8_t opCode) {
     closeSocket(connSocket);
     connSocket = 0;
   }
-  return HasReturnvaluesIF::RETURN_OK;
 }
 
 ReturnValue_t TcpTmTcServer::initializeAfterTaskCreation() {
@@ -159,7 +160,7 @@ void TcpTmTcServer::handleServerOperation(socket_t& connSocket) {
 #endif
 
   while (true) {
-    int retval = recv(connSocket, reinterpret_cast<char*>(receptionBuffer.data()),
+    ssize_t retval = recv(connSocket, reinterpret_cast<char*>(receptionBuffer.data()),
                       receptionBuffer.capacity(), tcpConfig.tcpFlags);
     if (retval == 0) {
       size_t availableReadData = ringBuffer.getAvailableReadData();
@@ -252,17 +253,17 @@ ReturnValue_t TcpTmTcServer::handleTcReception(uint8_t* spacePacket, size_t pack
   return result;
 }
 
-std::string TcpTmTcServer::getTcpPort() const { return tcpConfig.tcpPort; }
+const std::string& TcpTmTcServer::getTcpPort() const { return tcpConfig.tcpPort; }
 
-void TcpTmTcServer::setSpacePacketParsingOptions(std::vector<uint16_t> validPacketIds) {
-  this->validPacketIds = validPacketIds;
+void TcpTmTcServer::setSpacePacketParsingOptions(std::vector<uint16_t> validPacketIds_) {
+  this->validPacketIds = std::move(validPacketIds_);
 }
 
 TcpTmTcServer::TcpConfig& TcpTmTcServer::getTcpConfigStruct() { return tcpConfig; }
 
 ReturnValue_t TcpTmTcServer::handleTmSending(socket_t connSocket, bool& tmSent) {
   // Access to the FIFO is mutex protected because it is filled by the bridge
-  MutexGuard(tmtcBridge->mutex, tmtcBridge->timeoutType, tmtcBridge->mutexTimeoutMs);
+  MutexGuard mg(tmtcBridge->mutex, tmtcBridge->timeoutType, tmtcBridge->mutexTimeoutMs);
   store_address_t storeId;
   while ((not tmtcBridge->tmFifo->empty()) and
          (tmtcBridge->packetSentCounter < tmtcBridge->sentPacketsPerCycle)) {
@@ -283,7 +284,7 @@ ReturnValue_t TcpTmTcServer::handleTmSending(socket_t connSocket, bool& tmSent)
 #endif
       arrayprinter::print(storeAccessor.data(), storeAccessor.size());
     }
-    int retval = send(connSocket, reinterpret_cast<const char*>(storeAccessor.data()),
+    ssize_t retval = send(connSocket, reinterpret_cast<const char*>(storeAccessor.data()),
                       storeAccessor.size(), tcpConfig.tcpTmFlags);
     if (retval == static_cast<int>(storeAccessor.size())) {
       // Packet sent, clear FIFO entry
@@ -339,6 +340,9 @@ ReturnValue_t TcpTmTcServer::handleTcRingBufferData(size_t availableReadData) {
   size_t foundSize = 0;
   size_t readLen = 0;
   while (readLen < readAmount) {
+    if(spacePacketParser == nullptr) {
+      return HasReturnvaluesIF::RETURN_FAILED;
+    }
     result =
         spacePacketParser->parseSpacePackets(bufPtrPtr, readAmount, startIdx, foundSize, readLen);
     switch (result) {

src/fsfw/osal/common/TcpTmTcServer.h

@@ -17,6 +17,7 @@
 #endif
 
 #include <string>
+#include <utility>
 #include <vector>
 
 class TcpTmTcBridge;
@@ -44,7 +45,7 @@ class TcpTmTcServer : public SystemObject, public TcpIpBase, public ExecutableOb
 
   struct TcpConfig {
    public:
-    TcpConfig(std::string tcpPort) : tcpPort(tcpPort) {}
+    explicit TcpConfig(std::string tcpPort) : tcpPort(std::move(tcpPort)) {}
 
     /**
      * Passed to the recv call
@@ -84,7 +85,7 @@ class TcpTmTcServer : public SystemObject, public TcpIpBase, public ExecutableOb
                 size_t ringBufferSize = RING_BUFFER_SIZE,
                 std::string customTcpServerPort = DEFAULT_SERVER_PORT,
                 ReceptionModes receptionMode = ReceptionModes::SPACE_PACKETS);
-  virtual ~TcpTmTcServer();
+  ~TcpTmTcServer() override;
 
   void enableWiretapping(bool enable);
 
@@ -97,10 +98,10 @@ class TcpTmTcServer : public SystemObject, public TcpIpBase, public ExecutableOb
   void setSpacePacketParsingOptions(std::vector<uint16_t> validPacketIds);
 
   ReturnValue_t initialize() override;
-  ReturnValue_t performOperation(uint8_t opCode) override;
+  [[noreturn]] ReturnValue_t performOperation(uint8_t opCode) override;
   ReturnValue_t initializeAfterTaskCreation() override;
 
-  std::string getTcpPort() const;
+  [[nodiscard]] const std::string& getTcpPort() const;
 
  protected:
   StorageManagerIF* tcStore = nullptr;
@@ -115,7 +116,7 @@ class TcpTmTcServer : public SystemObject, public TcpIpBase, public ExecutableOb
 
   ReceptionModes receptionMode;
   TcpConfig tcpConfig;
-  struct sockaddr tcpAddress;
+  struct sockaddr tcpAddress = {};
   socket_t listenerTcpSocket = 0;
 
   MessageQueueId_t targetTcDestination = MessageQueueIF::NO_QUEUE;

src/fsfw/osal/common/UdpTcPollingTask.cpp

@@ -16,11 +16,13 @@
 //! Debugging preprocessor define.
 #define FSFW_UDP_RECV_WIRETAPPING_ENABLED 0
 
+const timeval UdpTcPollingTask::DEFAULT_TIMEOUT = {0, 500000};
+
 UdpTcPollingTask::UdpTcPollingTask(object_id_t objectId, object_id_t tmtcUdpBridge,
                                    size_t maxRecvSize, double timeoutSeconds)
     : SystemObject(objectId), tmtcBridgeId(tmtcUdpBridge) {
-  if (frameSize > 0) {
-    this->frameSize = frameSize;
+  if (maxRecvSize > 0) {
+    this->frameSize = maxRecvSize;
   } else {
     this->frameSize = DEFAULT_MAX_RECV_SIZE;
   }
@@ -31,22 +33,20 @@ UdpTcPollingTask::UdpTcPollingTask(object_id_t objectId, object_id_t tmtcUdpBrid
   receptionBuffer.resize(this->frameSize);
 
   if (timeoutSeconds == -1) {
-    receptionTimeout = DEFAULT_TIMEOUT;
+    receptionTimeout = UdpTcPollingTask::DEFAULT_TIMEOUT;
   } else {
     receptionTimeout = timevalOperations::toTimeval(timeoutSeconds);
   }
 }
 
-UdpTcPollingTask::~UdpTcPollingTask() {}
-
-ReturnValue_t UdpTcPollingTask::performOperation(uint8_t opCode) {
+[[noreturn]] ReturnValue_t UdpTcPollingTask::performOperation(uint8_t opCode) {
   /* Sender Address is cached here. */
-  struct sockaddr senderAddress;
+  struct sockaddr senderAddress {};
   socklen_t senderAddressSize = sizeof(senderAddress);
 
   /* Poll for new UDP datagrams in permanent loop. */
   while (true) {
-    int bytesReceived =
+    ssize_t bytesReceived =
         recvfrom(this->serverSocket, reinterpret_cast<char*>(receptionBuffer.data()), frameSize,
                  receptionFlags, &senderAddress, &senderAddressSize);
     if (bytesReceived == SOCKET_ERROR) {
@@ -70,7 +70,6 @@ ReturnValue_t UdpTcPollingTask::performOperation(uint8_t opCode) {
     }
     tmtcBridge->checkAndSetClientAddress(senderAddress);
   }
-  return HasReturnvaluesIF::RETURN_OK;
 }
 
 ReturnValue_t UdpTcPollingTask::handleSuccessfullTcRead(size_t bytesRead) {
@@ -155,7 +154,7 @@ void UdpTcPollingTask::setTimeout(double timeoutSeconds) {
 #endif
   }
 #elif defined(PLATFORM_UNIX)
-  timeval tval;
+  timeval tval{};
   tval = timevalOperations::toTimeval(timeoutSeconds);
   int result = setsockopt(serverSocket, SOL_SOCKET, SO_RCVTIMEO, &tval, sizeof(receptionTimeout));
   if (result == -1) {

src/fsfw/osal/common/UdpTcPollingTask.h

@@ -21,11 +21,11 @@ class UdpTcPollingTask : public TcpIpBase, public SystemObject, public Executabl
  public:
   static constexpr size_t DEFAULT_MAX_RECV_SIZE = 1500;
   //! 0.5  default milliseconds timeout for now.
-  static constexpr timeval DEFAULT_TIMEOUT = {0, 500};
+  static const timeval DEFAULT_TIMEOUT;
 
   UdpTcPollingTask(object_id_t objectId, object_id_t tmtcUdpBridge, size_t maxRecvSize = 0,
                    double timeoutSeconds = -1);
-  virtual ~UdpTcPollingTask();
+  ~UdpTcPollingTask() override = default;
 
   /**
    * Turn on optional timeout for UDP polling. In the default mode,
@@ -34,9 +34,9 @@ class UdpTcPollingTask : public TcpIpBase, public SystemObject, public Executabl
    */
   void setTimeout(double timeoutSeconds);
 
-  virtual ReturnValue_t performOperation(uint8_t opCode) override;
-  virtual ReturnValue_t initialize() override;
-  virtual ReturnValue_t initializeAfterTaskCreation() override;
+  [[noreturn]] ReturnValue_t performOperation(uint8_t opCode) override;
+  ReturnValue_t initialize() override;
+  ReturnValue_t initializeAfterTaskCreation() override;
 
  protected:
   StorageManagerIF* tcStore = nullptr;
@@ -51,7 +51,7 @@ class UdpTcPollingTask : public TcpIpBase, public SystemObject, public Executabl
   std::vector<uint8_t> receptionBuffer;
 
   size_t frameSize = 0;
-  timeval receptionTimeout;
+  timeval receptionTimeout{};
 
   ReturnValue_t handleSuccessfullTcRead(size_t bytesRead);
 };

src/fsfw/osal/common/UdpTmTcBridge.cpp

@@ -20,13 +20,13 @@
 const std::string UdpTmTcBridge::DEFAULT_SERVER_PORT = tcpip::DEFAULT_SERVER_PORT;
 
 UdpTmTcBridge::UdpTmTcBridge(object_id_t objectId, object_id_t tcDestination,
-                             std::string udpServerPort, object_id_t tmStoreId,
+                             const std::string &udpServerPort_, object_id_t tmStoreId,
                              object_id_t tcStoreId)
     : TmTcBridge(objectId, tcDestination, tmStoreId, tcStoreId) {
-  if (udpServerPort == "") {
-    this->udpServerPort = DEFAULT_SERVER_PORT;
+  if (udpServerPort_.empty()) {
+    udpServerPort = DEFAULT_SERVER_PORT;
   } else {
-    this->udpServerPort = udpServerPort;
+    udpServerPort = udpServerPort_;
   }
 
   mutex = MutexFactory::instance()->createMutex();
@@ -117,8 +117,8 @@ ReturnValue_t UdpTmTcBridge::sendTm(const uint8_t *data, size_t dataLen) {
   tcpip::printAddress(&clientAddress);
 #endif
 
-  int bytesSent = sendto(serverSocket, reinterpret_cast<const char *>(data), dataLen, flags,
-                         &clientAddress, clientAddressLen);
+  ssize_t bytesSent = sendto(serverSocket, reinterpret_cast<const char *>(data), dataLen, flags,
+                             &clientAddress, clientAddressLen);
   if (bytesSent == SOCKET_ERROR) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
     sif::warning << "TmTcUdpBridge::sendTm: Send operation failed." << std::endl;
@@ -150,7 +150,7 @@ void UdpTmTcBridge::checkAndSetClientAddress(sockaddr &newAddress) {
   clientAddressLen = sizeof(clientAddress);
 }
 
-void UdpTmTcBridge::setMutexProperties(MutexIF::TimeoutType timeoutType, dur_millis_t timeoutMs) {
-  this->timeoutType = timeoutType;
-  this->mutexTimeoutMs = timeoutMs;
+void UdpTmTcBridge::setMutexProperties(MutexIF::TimeoutType timeoutType_, dur_millis_t timeoutMs) {
+  timeoutType = timeoutType_;
+  mutexTimeoutMs = timeoutMs;
 }

src/fsfw/osal/common/UdpTmTcBridge.h

@@ -29,10 +29,10 @@ class UdpTmTcBridge : public TmTcBridge, public TcpIpBase {
   /* The ports chosen here should not be used by any other process. */
   static const std::string DEFAULT_SERVER_PORT;
 
-  UdpTmTcBridge(object_id_t objectId, object_id_t tcDestination, std::string udpServerPort = "",
-                object_id_t tmStoreId = objects::TM_STORE,
+  UdpTmTcBridge(object_id_t objectId, object_id_t tcDestination,
+                const std::string& udpServerPort = "", object_id_t tmStoreId = objects::TM_STORE,
                 object_id_t tcStoreId = objects::TC_STORE);
-  virtual ~UdpTmTcBridge();
+  ~UdpTmTcBridge() override;
 
   /**
    * Set properties of internal mutex.
@@ -46,12 +46,12 @@ class UdpTmTcBridge : public TmTcBridge, public TcpIpBase {
   std::string getUdpPort() const;
 
  protected:
-  virtual ReturnValue_t sendTm(const uint8_t* data, size_t dataLen) override;
+  ReturnValue_t sendTm(const uint8_t* data, size_t dataLen) override;
 
  private:
   std::string udpServerPort;
 
-  struct sockaddr clientAddress;
+  struct sockaddr clientAddress = {};
   socklen_t clientAddressLen = 0;
 
   //! Access to the client address is mutex protected as it is set by another task.

src/fsfw/osal/freertos/Clock.cpp

@@ -11,9 +11,6 @@
 // TODO sanitize input?
 // TODO much of this code can be reused for tick-only systems
 
-uint16_t Clock::leapSeconds = 0;
-MutexIF* Clock::timeMutex = nullptr;
-
 uint32_t Clock::getTicksPerSecond(void) { return 1000; }
 
 ReturnValue_t Clock::setClock(const TimeOfDay_t* time) {

src/fsfw/osal/freertos/MessageQueue.cpp

@@ -4,8 +4,9 @@
 #include "fsfw/osal/freertos/QueueMapManager.h"
 #include "fsfw/serviceinterface/ServiceInterface.h"
 
-MessageQueue::MessageQueue(size_t messageDepth, size_t maxMessageSize)
-    : maxMessageSize(maxMessageSize) {
+MessageQueue::MessageQueue(size_t messageDepth, size_t maxMessageSize, MqArgs* args)
+    : MessageQueueBase(MessageQueueIF::NO_QUEUE, MessageQueueIF::NO_QUEUE, args),
+      maxMessageSize(maxMessageSize) {
   handle = xQueueCreate(messageDepth, maxMessageSize);
   if (handle == nullptr) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
@@ -15,10 +16,10 @@ MessageQueue::MessageQueue(size_t messageDepth, size_t maxMessageSize)
 #else
     sif::printError("MessageQueue::MessageQueue: Creation failed\n");
     sif::printError("Specified Message Depth: %d\n", messageDepth);
-    sif::printError("Specified MAximum Message Size: %d\n", maxMessageSize);
+    sif::printError("Specified Maximum Message Size: %d\n", maxMessageSize);
 #endif
   }
-  QueueMapManager::instance()->addMessageQueue(handle, &queueId);
+  QueueMapManager::instance()->addMessageQueue(handle, &id);
 }
 
 MessageQueue::~MessageQueue() {
@@ -29,28 +30,6 @@ MessageQueue::~MessageQueue() {
 
 void MessageQueue::switchSystemContext(CallContext callContext) { this->callContext = callContext; }
 
-ReturnValue_t MessageQueue::sendMessage(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
-                                        bool ignoreFault) {
-  return sendMessageFrom(sendTo, message, this->getId(), ignoreFault);
-}
-
-ReturnValue_t MessageQueue::sendToDefault(MessageQueueMessageIF* message) {
-  return sendToDefaultFrom(message, this->getId());
-}
-
-ReturnValue_t MessageQueue::sendToDefaultFrom(MessageQueueMessageIF* message,
-                                              MessageQueueId_t sentFrom, bool ignoreFault) {
-  return sendMessageFrom(defaultDestination, message, sentFrom, ignoreFault);
-}
-
-ReturnValue_t MessageQueue::reply(MessageQueueMessageIF* message) {
-  if (this->lastPartner != MessageQueueIF::NO_QUEUE) {
-    return sendMessageFrom(this->lastPartner, message, this->getId());
-  } else {
-    return NO_REPLY_PARTNER;
-  }
-}
-
 ReturnValue_t MessageQueue::sendMessageFrom(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
                                             MessageQueueId_t sentFrom, bool ignoreFault) {
   return sendMessageFromMessageQueue(sendTo, message, sentFrom, ignoreFault, callContext);
@@ -72,27 +51,16 @@ ReturnValue_t MessageQueue::handleSendResult(BaseType_t result, bool ignoreFault
   return HasReturnvaluesIF::RETURN_OK;
 }
 
-ReturnValue_t MessageQueue::receiveMessage(MessageQueueMessageIF* message,
-                                           MessageQueueId_t* receivedFrom) {
-  ReturnValue_t status = this->receiveMessage(message);
-  if (status == HasReturnvaluesIF::RETURN_OK) {
-    *receivedFrom = this->lastPartner;
-  }
-  return status;
-}
-
 ReturnValue_t MessageQueue::receiveMessage(MessageQueueMessageIF* message) {
   BaseType_t result = xQueueReceive(handle, reinterpret_cast<void*>(message->getBuffer()), 0);
   if (result == pdPASS) {
-    this->lastPartner = message->getSender();
+    this->last = message->getSender();
     return HasReturnvaluesIF::RETURN_OK;
   } else {
     return MessageQueueIF::EMPTY;
   }
 }
 
-MessageQueueId_t MessageQueue::getLastPartner() const { return lastPartner; }
-
 ReturnValue_t MessageQueue::flush(uint32_t* count) {
   // TODO FreeRTOS does not support flushing partially
   // Is always successful
@@ -100,17 +68,6 @@ ReturnValue_t MessageQueue::flush(uint32_t* count) {
   return HasReturnvaluesIF::RETURN_OK;
 }
 
-MessageQueueId_t MessageQueue::getId() const { return queueId; }
-
-void MessageQueue::setDefaultDestination(MessageQueueId_t defaultDestination) {
-  defaultDestinationSet = true;
-  this->defaultDestination = defaultDestination;
-}
-
-MessageQueueId_t MessageQueue::getDefaultDestination() const { return defaultDestination; }
-
-bool MessageQueue::isDefaultDestinationSet() const { return defaultDestinationSet; }
-
 // static core function to send messages.
 ReturnValue_t MessageQueue::sendMessageFromMessageQueue(MessageQueueId_t sendTo,
                                                         MessageQueueMessageIF* message,

src/fsfw/osal/freertos/MessageQueue.h

@@ -1,12 +1,15 @@
 #ifndef FSFW_OSAL_FREERTOS_MESSAGEQUEUE_H_
 #define FSFW_OSAL_FREERTOS_MESSAGEQUEUE_H_
 
+#include <fsfw/ipc/MessageQueueBase.h>
+
 #include "FreeRTOS.h"
 #include "TaskManagement.h"
 #include "fsfw/internalerror/InternalErrorReporterIF.h"
 #include "fsfw/ipc/MessageQueueIF.h"
 #include "fsfw/ipc/MessageQueueMessage.h"
 #include "fsfw/ipc/MessageQueueMessageIF.h"
+#include "fsfw/ipc/definitions.h"
 #include "queue.h"
 
 /**
@@ -32,7 +35,7 @@
  * @ingroup osal
  * @ingroup message_queue
  */
-class MessageQueue : public MessageQueueIF {
+class MessageQueue : public MessageQueueBase {
   friend class MessageQueueSenderIF;
 
  public:
@@ -53,7 +56,8 @@ class MessageQueue : public MessageQueueIF {
    * This should be left default.
    */
   MessageQueue(size_t messageDepth = 3,
-               size_t maxMessageSize = MessageQueueMessage::MAX_MESSAGE_SIZE);
+               size_t maxMessageSize = MessageQueueMessage::MAX_MESSAGE_SIZE,
+               MqArgs* args = nullptr);
 
   /** Copying message queues forbidden */
   MessageQueue(const MessageQueue&) = delete;
@@ -73,40 +77,15 @@ class MessageQueue : public MessageQueueIF {
    */
   void switchSystemContext(CallContext callContext);
 
-  /** MessageQueueIF implementation */
-  ReturnValue_t sendMessage(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
-                            bool ignoreFault = false) override;
+  QueueHandle_t getNativeQueueHandle();
 
-  ReturnValue_t sendToDefault(MessageQueueMessageIF* message) override;
-
-  ReturnValue_t reply(MessageQueueMessageIF* message) override;
+  // Implement non-generic MessageQueueIF functions not handled by MessageQueueBase
   virtual ReturnValue_t sendMessageFrom(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
                                         MessageQueueId_t sentFrom = NO_QUEUE,
                                         bool ignoreFault = false) override;
-
-  virtual ReturnValue_t sendToDefaultFrom(MessageQueueMessageIF* message,
-                                          MessageQueueId_t sentFrom = NO_QUEUE,
-                                          bool ignoreFault = false) override;
-
-  ReturnValue_t receiveMessage(MessageQueueMessageIF* message,
-                               MessageQueueId_t* receivedFrom) override;
-
   ReturnValue_t receiveMessage(MessageQueueMessageIF* message) override;
-
   ReturnValue_t flush(uint32_t* count) override;
 
-  MessageQueueId_t getLastPartner() const override;
-
-  MessageQueueId_t getId() const override;
-
-  void setDefaultDestination(MessageQueueId_t defaultDestination) override;
-
-  MessageQueueId_t getDefaultDestination() const override;
-
-  bool isDefaultDestinationSet() const override;
-
-  QueueHandle_t getNativeQueueHandle();
-
  protected:
   /**
    * @brief 	Implementation to be called from any send Call within
@@ -136,12 +115,8 @@ class MessageQueue : public MessageQueueIF {
   static ReturnValue_t handleSendResult(BaseType_t result, bool ignoreFault);
 
  private:
-  bool defaultDestinationSet = false;
   QueueHandle_t handle;
-  MessageQueueId_t queueId = MessageQueueIF::NO_QUEUE;
 
-  MessageQueueId_t defaultDestination = MessageQueueIF::NO_QUEUE;
-  MessageQueueId_t lastPartner = MessageQueueIF::NO_QUEUE;
   const size_t maxMessageSize;
   //! Stores the current system context
   CallContext callContext = CallContext::TASK;

src/fsfw/osal/freertos/PeriodicTask.cpp

@@ -97,7 +97,11 @@ void PeriodicTask::taskFunctionality() {
 
 ReturnValue_t PeriodicTask::addComponent(object_id_t object) {
   ExecutableObjectIF* newObject = ObjectManager::instance()->get<ExecutableObjectIF>(object);
-  if (newObject == nullptr) {
+  return addComponent(newObject);
+}
+
+ReturnValue_t PeriodicTask::addComponent(ExecutableObjectIF* object) {
+  if (object == nullptr) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
     sif::error << "PeriodicTask::addComponent: Invalid object. Make sure"
                   "it implement ExecutableObjectIF"
@@ -105,8 +109,8 @@ ReturnValue_t PeriodicTask::addComponent(object_id_t object) {
 #endif
     return HasReturnvaluesIF::RETURN_FAILED;
   }
-  objectList.push_back(newObject);
-  newObject->setTaskIF(this);
+  objectList.push_back(object);
+  object->setTaskIF(this);
 
   return HasReturnvaluesIF::RETURN_OK;
 }

src/fsfw/osal/freertos/PeriodicTask.h

@@ -63,6 +63,16 @@ class PeriodicTask : public PeriodicTaskIF, public FreeRTOSTaskIF {
    */
   ReturnValue_t addComponent(object_id_t object) override;
 
+  /**
+   * Adds an object to the list of objects to be executed.
+   * The objects are executed in the order added.
+   * @param object Id of the object to add.
+   * @return
+   * -@c RETURN_OK on success
+   * -@c RETURN_FAILED if the object could not be added.
+   */
+  ReturnValue_t addComponent(ExecutableObjectIF* object) override;
+
   uint32_t getPeriodMs() const override;
 
   ReturnValue_t sleepFor(uint32_t ms) override;

src/fsfw/osal/freertos/QueueFactory.cpp

@@ -22,8 +22,9 @@ QueueFactory::QueueFactory() {}
 
 QueueFactory::~QueueFactory() {}
 
-MessageQueueIF* QueueFactory::createMessageQueue(uint32_t messageDepth, size_t maxMessageSize) {
-  return new MessageQueue(messageDepth, maxMessageSize);
+MessageQueueIF* QueueFactory::createMessageQueue(uint32_t messageDepth, size_t maxMessageSize,
+                                                 MqArgs* args) {
+  return new MessageQueue(messageDepth, maxMessageSize, args);
 }
 
 void QueueFactory::deleteMessageQueue(MessageQueueIF* queue) { delete queue; }

src/fsfw/osal/host/CMakeLists.txt

@@ -1,24 +1,27 @@
-target_sources(${LIB_FSFW_NAME} 
-	PRIVATE 
-		Clock.cpp
-		FixedTimeslotTask.cpp
-		MessageQueue.cpp
-		Mutex.cpp
-		MutexFactory.cpp
-		PeriodicTask.cpp
-		QueueFactory.cpp
-		QueueMapManager.cpp
-		SemaphoreFactory.cpp
-		TaskFactory.cpp
-		taskHelpers.cpp
+target_sources(${LIB_FSFW_NAME} PRIVATE
+  Clock.cpp
+  FixedTimeslotTask.cpp
+  MessageQueue.cpp
+  Mutex.cpp
+  MutexFactory.cpp
+  PeriodicTask.cpp
+  QueueFactory.cpp
+  QueueMapManager.cpp
+  SemaphoreFactory.cpp
+  TaskFactory.cpp
+  taskHelpers.cpp
 )
 
 if(UNIX)
-	find_package(Threads REQUIRED)
-	
-	target_link_libraries(${LIB_FSFW_NAME} 
-	PRIVATE
-		rt
-		${CMAKE_THREAD_LIBS_INIT}
-	)
+  find_package(Threads REQUIRED)
+
+  target_link_libraries(${LIB_FSFW_NAME} PRIVATE
+    ${CMAKE_THREAD_LIBS_INIT}
+  )
+  if(NOT APPLE)
+    target_link_libraries(${LIB_FSFW_NAME} PRIVATE
+      rt
+      )
+  endif()
+
 endif()

src/fsfw/osal/host/Clock.cpp

@@ -2,6 +2,7 @@
 
 #include <chrono>
 
+#include "fsfw/ipc/MutexGuard.h"
 #include "fsfw/platform.h"
 #include "fsfw/serviceinterface/ServiceInterface.h"
 
@@ -11,9 +12,6 @@
 #include <fstream>
 #endif
 
-uint16_t Clock::leapSeconds = 0;
-MutexIF* Clock::timeMutex = NULL;
-
 using SystemClock = std::chrono::system_clock;
 
 uint32_t Clock::getTicksPerSecond(void) {
@@ -127,6 +125,13 @@ ReturnValue_t Clock::getDateAndTime(TimeOfDay_t* time) {
   auto seconds = std::chrono::time_point_cast<std::chrono::seconds>(now);
   auto fraction = now - seconds;
   time_t tt = SystemClock::to_time_t(now);
+  ReturnValue_t result = checkOrCreateClockMutex();
+  if (result != HasReturnvaluesIF::RETURN_OK) {
+    return result;
+  }
+  MutexGuard helper(timeMutex);
+  // gmtime writes its output in a global buffer which is not Thread Safe
+  // Therefore we have to use a Mutex here
   struct tm* timeInfo;
   timeInfo = gmtime(&tt);
   time->year = timeInfo->tm_year + 1900;
@@ -150,17 +155,14 @@ ReturnValue_t Clock::convertTimeOfDayToTimeval(const TimeOfDay_t* from, timeval*
   time_tm.tm_hour = from->hour;
   time_tm.tm_min = from->minute;
   time_tm.tm_sec = from->second;
+  time_tm.tm_isdst = 0;
 
-  time_t seconds = mktime(&time_tm);
+  time_t seconds = timegm(&time_tm);
 
   to->tv_sec = seconds;
   to->tv_usec = from->usecond;
   // Fails in 2038..
   return HasReturnvaluesIF::RETURN_OK;
-#if FSFW_CPP_OSTREAM_ENABLED == 1
-  sif::warning << "Clock::convertTimeBla: not implemented yet" << std::endl;
-#endif
-  return HasReturnvaluesIF::RETURN_OK;
 }
 
 ReturnValue_t Clock::convertTimevalToJD2000(timeval time, double* JD2000) {

src/fsfw/osal/host/MessageQueue.cpp

@@ -8,10 +8,12 @@
 #include "fsfw/osal/host/QueueMapManager.h"
 #include "fsfw/serviceinterface/ServiceInterface.h"
 
-MessageQueue::MessageQueue(size_t messageDepth, size_t maxMessageSize)
-    : messageSize(maxMessageSize), messageDepth(messageDepth) {
+MessageQueue::MessageQueue(size_t messageDepth, size_t maxMessageSize, MqArgs* args)
+    : MessageQueueBase(MessageQueueIF::NO_QUEUE, MessageQueueIF::NO_QUEUE, args),
+      messageSize(maxMessageSize),
+      messageDepth(messageDepth) {
   queueLock = MutexFactory::instance()->createMutex();
-  auto result = QueueMapManager::instance()->addMessageQueue(this, &mqId);
+  auto result = QueueMapManager::instance()->addMessageQueue(this, &id);
   if (result != HasReturnvaluesIF::RETURN_OK) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
     sif::error << "MessageQueue::MessageQueue: Could not be created" << std::endl;
@@ -23,42 +25,11 @@ MessageQueue::MessageQueue(size_t messageDepth, size_t maxMessageSize)
 
 MessageQueue::~MessageQueue() { MutexFactory::instance()->deleteMutex(queueLock); }
 
-ReturnValue_t MessageQueue::sendMessage(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
-                                        bool ignoreFault) {
-  return sendMessageFrom(sendTo, message, this->getId(), ignoreFault);
-}
-
-ReturnValue_t MessageQueue::sendToDefault(MessageQueueMessageIF* message) {
-  return sendToDefaultFrom(message, this->getId());
-}
-
-ReturnValue_t MessageQueue::sendToDefaultFrom(MessageQueueMessageIF* message,
-                                              MessageQueueId_t sentFrom, bool ignoreFault) {
-  return sendMessageFrom(defaultDestination, message, sentFrom, ignoreFault);
-}
-
-ReturnValue_t MessageQueue::reply(MessageQueueMessageIF* message) {
-  if (this->lastPartner != MessageQueueIF::NO_QUEUE) {
-    return sendMessageFrom(this->lastPartner, message, this->getId());
-  } else {
-    return MessageQueueIF::NO_REPLY_PARTNER;
-  }
-}
-
 ReturnValue_t MessageQueue::sendMessageFrom(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
                                             MessageQueueId_t sentFrom, bool ignoreFault) {
   return sendMessageFromMessageQueue(sendTo, message, sentFrom, ignoreFault);
 }
 
-ReturnValue_t MessageQueue::receiveMessage(MessageQueueMessageIF* message,
-                                           MessageQueueId_t* receivedFrom) {
-  ReturnValue_t status = this->receiveMessage(message);
-  if (status == HasReturnvaluesIF::RETURN_OK) {
-    *receivedFrom = this->lastPartner;
-  }
-  return status;
-}
-
 ReturnValue_t MessageQueue::receiveMessage(MessageQueueMessageIF* message) {
   if (messageQueue.empty()) {
     return MessageQueueIF::EMPTY;
@@ -68,12 +39,10 @@ ReturnValue_t MessageQueue::receiveMessage(MessageQueueMessageIF* message) {
             message->getBuffer());
   messageQueue.pop();
   // The last partner is the first uint32_t field in the message
-  this->lastPartner = message->getSender();
+  this->last = message->getSender();
   return HasReturnvaluesIF::RETURN_OK;
 }
 
-MessageQueueId_t MessageQueue::getLastPartner() const { return lastPartner; }
-
 ReturnValue_t MessageQueue::flush(uint32_t* count) {
   *count = messageQueue.size();
   // Clears the queue.
@@ -81,17 +50,6 @@ ReturnValue_t MessageQueue::flush(uint32_t* count) {
   return HasReturnvaluesIF::RETURN_OK;
 }
 
-MessageQueueId_t MessageQueue::getId() const { return mqId; }
-
-void MessageQueue::setDefaultDestination(MessageQueueId_t defaultDestination) {
-  defaultDestinationSet = true;
-  this->defaultDestination = defaultDestination;
-}
-
-MessageQueueId_t MessageQueue::getDefaultDestination() const { return defaultDestination; }
-
-bool MessageQueue::isDefaultDestinationSet() const { return defaultDestinationSet; }
-
 // static core function to send messages.
 ReturnValue_t MessageQueue::sendMessageFromMessageQueue(MessageQueueId_t sendTo,
                                                         MessageQueueMessageIF* message,
@@ -125,6 +83,13 @@ ReturnValue_t MessageQueue::sendMessageFromMessageQueue(MessageQueueId_t sendTo,
     memcpy(targetQueue->messageQueue.back().data(), message->getBuffer(),
            message->getMaximumMessageSize());
   } else {
+    if (not ignoreFault) {
+      InternalErrorReporterIF* internalErrorReporter =
+          ObjectManager::instance()->get<InternalErrorReporterIF>(objects::INTERNAL_ERROR_REPORTER);
+      if (internalErrorReporter != nullptr) {
+        internalErrorReporter->queueMessageNotSent();
+      }
+    }
     return MessageQueueIF::FULL;
   }
   return HasReturnvaluesIF::RETURN_OK;

src/fsfw/osal/host/MessageQueue.h

@@ -5,9 +5,11 @@
 #include <queue>
 
 #include "fsfw/internalerror/InternalErrorReporterIF.h"
+#include "fsfw/ipc/MessageQueueBase.h"
 #include "fsfw/ipc/MessageQueueIF.h"
 #include "fsfw/ipc/MessageQueueMessage.h"
 #include "fsfw/ipc/MutexIF.h"
+#include "fsfw/ipc/definitions.h"
 #include "fsfw/timemanager/Clock.h"
 
 /**
@@ -33,7 +35,7 @@
  * @ingroup osal
  * @ingroup message_queue
  */
-class MessageQueue : public MessageQueueIF {
+class MessageQueue : public MessageQueueBase {
   friend class MessageQueueSenderIF;
 
  public:
@@ -54,7 +56,8 @@ class MessageQueue : public MessageQueueIF {
    * This should be left default.
    */
   MessageQueue(size_t messageDepth = 3,
-               size_t maxMessageSize = MessageQueueMessage::MAX_MESSAGE_SIZE);
+               size_t maxMessageSize = MessageQueueMessage::MAX_MESSAGE_SIZE,
+               MqArgs* args = nullptr);
 
   /** Copying message queues forbidden */
   MessageQueue(const MessageQueue&) = delete;
@@ -67,121 +70,12 @@ class MessageQueue : public MessageQueueIF {
    */
   virtual ~MessageQueue();
 
-  /**
-   * @brief	This operation sends a message to the given destination.
-   * @details	It directly uses the sendMessage call of the MessageQueueSender
-   * parent, but passes its queue id as "sentFrom" parameter.
-   * @param sendTo	This parameter specifies the message queue id of the
-   *  destination message queue.
-   * @param message	A pointer to a previously created message, which is sent.
-   * @param ignoreFault If set to true, the internal software fault counter
-   * is not incremented if queue is full.
-   */
-  ReturnValue_t sendMessage(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
-                            bool ignoreFault = false) override;
-  /**
-   * @brief	This operation sends a message to the default destination.
-   * @details	As in the sendMessage method, this function uses the
-   * sendToDefault call of the MessageQueueSender parent class and adds its
-   * queue id as "sentFrom" information.
-   * @param message	A pointer to a previously created message, which is sent.
-   */
-  ReturnValue_t sendToDefault(MessageQueueMessageIF* message) override;
-  /**
-   * @brief	This operation sends a message to the last communication partner.
-   * @details	This operation simplifies answering an incoming message by using
-   * the stored lastPartner information as destination. If there was no
-   * message received yet (i.e. lastPartner is zero), an error code is returned.
-   * @param message	A pointer to a previously created message, which is sent.
-   */
-  ReturnValue_t reply(MessageQueueMessageIF* message) override;
-
-  /**
-   * @brief	With the sendMessage call, a queue message is sent to a
-   * 			receiving queue.
-   * @details
-   * This method takes the message provided, adds the sentFrom information and
-   * passes it on to the destination provided with an operating system call.
-   *  The OS's return value is returned.
-   * @param sendTo	This parameter specifies the message queue id to send
-   * the message to.
-   * @param message	This is a pointer to a previously created message,
-   * which is sent.
-   * @param sentFrom	The sentFrom information can be set to inject the
-   * sender's queue id into the message. This variable is set to zero by
-   * default.
-   * @param ignoreFault If set to true, the internal software fault counter
-   * is not incremented if queue is full.
-   */
+  // Implement non-generic MessageQueueIF functions not handled by MessageQueueBase
   virtual ReturnValue_t sendMessageFrom(MessageQueueId_t sendTo, MessageQueueMessageIF* message,
                                         MessageQueueId_t sentFrom = NO_QUEUE,
                                         bool ignoreFault = false) override;
-
-  /**
-   * @brief	The sendToDefault method sends a queue message to the default
-   * 			destination.
-   * @details
-   * In all other aspects, it works identical to the sendMessage method.
-   * @param message	This is a pointer to a previously created message,
-   * which is sent.
-   * @param sentFrom	The sentFrom information can be set to inject the
-   * sender's queue id into the message. This variable is set to zero by
-   * default.
-   */
-  virtual ReturnValue_t sendToDefaultFrom(MessageQueueMessageIF* message,
-                                          MessageQueueId_t sentFrom = NO_QUEUE,
-                                          bool ignoreFault = false) override;
-
-  /**
-   * @brief	This function reads available messages from the message queue
-   * 			and returns the sender.
-   * @details
-   * It works identically to the other receiveMessage call, but in  addition
-   * returns the sender's queue id.
-   * @param message	A pointer to a message in which the received data is stored.
-   * @param receivedFrom	A pointer to a queue id in which the sender's id is stored.
-   */
-  ReturnValue_t receiveMessage(MessageQueueMessageIF* message,
-                               MessageQueueId_t* receivedFrom) override;
-
-  /**
-   * @brief	This function reads available messages from the message queue.
-   * @details
-   * If data is available it is stored in the passed message pointer.
-   * The message's original content is overwritten and the sendFrom
-   * information is stored in the lastPartner attribute. Else, the lastPartner
-   * information remains untouched, the message's content is cleared and the
-   * function returns immediately.
-   * @param message	A pointer to a message in which the received data is stored.
-   */
   ReturnValue_t receiveMessage(MessageQueueMessageIF* message) override;
-  /**
-   * Deletes all pending messages in the queue.
-   * @param count The number of flushed messages.
-   * @return RETURN_OK on success.
-   */
   ReturnValue_t flush(uint32_t* count) override;
-  /**
-   * @brief	This method returns the message queue id of the last
-   * 			communication partner.
-   */
-  MessageQueueId_t getLastPartner() const override;
-  /**
-   * @brief	This method returns the message queue id of this class's
-   * 			message queue.
-   */
-  MessageQueueId_t getId() const override;
-
-  /**
-   * @brief	This method is a simple setter for the default destination.
-   */
-  void setDefaultDestination(MessageQueueId_t defaultDestination) override;
-  /**
-   * @brief	This method is a simple getter for the default destination.
-   */
-  MessageQueueId_t getDefaultDestination() const override;
-
-  bool isDefaultDestinationSet() const override;
 
   ReturnValue_t lockQueue(MutexIF::TimeoutType timeoutType, dur_millis_t lockTimeout);
   ReturnValue_t unlockQueue();
@@ -211,23 +105,14 @@ class MessageQueue : public MessageQueueIF {
                                                    MessageQueueId_t sentFrom = NO_QUEUE,
                                                    bool ignoreFault = false);
 
-  // static ReturnValue_t handleSendResult(BaseType_t result, bool ignoreFault);
-
  private:
   std::queue<std::vector<uint8_t>> messageQueue;
-  /**
-   * @brief	The class stores the queue id it got assigned.
-   * 			If initialization fails, the queue id is set to zero.
-   */
-  MessageQueueId_t mqId = MessageQueueIF::NO_QUEUE;
   size_t messageSize = 0;
   size_t messageDepth = 0;
 
   MutexIF* queueLock;
 
-  bool defaultDestinationSet = false;
   MessageQueueId_t defaultDestination = MessageQueueIF::NO_QUEUE;
-  MessageQueueId_t lastPartner = MessageQueueIF::NO_QUEUE;
 };
 
 #endif /* FRAMEWORK_OSAL_HOST_MESSAGEQUEUE_H_ */

src/fsfw/osal/host/PeriodicTask.cpp

@@ -102,11 +102,15 @@ void PeriodicTask::taskFunctionality() {
 
 ReturnValue_t PeriodicTask::addComponent(object_id_t object) {
   ExecutableObjectIF* newObject = ObjectManager::instance()->get<ExecutableObjectIF>(object);
-  if (newObject == nullptr) {
+  return addComponent(newObject);
+}
+
+ReturnValue_t PeriodicTask::addComponent(ExecutableObjectIF* object) {
+  if (object == nullptr) {
     return HasReturnvaluesIF::RETURN_FAILED;
   }
-  newObject->setTaskIF(this);
-  objectList.push_back(newObject);
+  object->setTaskIF(this);
+  objectList.push_back(object);
   return HasReturnvaluesIF::RETURN_OK;
 }