changelog, prep v6.0.0

Reviewed-on: #724

CHANGELOG.md

@@ -16,6 +16,324 @@ will consitute of a breaking change warranting a new major release:
 
 # [unreleased]
 
+# [v6.0.0] 2023-07-02
+
+- `q7s-package` version v3.2.0
+- Important bugfixes for PTME. See `q7s-package` CHANGELOG.
+
+## Changed
+
+- Added back PTME busy bit polling. This is necessary due to changes to the AXI APB interface
+  to the PTME core.
+
+## Fixed
+
+- For the live channel (VC0), telemetry was still only dumped if the transmitter is active.
+  Please note that this fix will lead to crashes for FW versions below v3.2.
+  However, it might not be an issue for the oldest firmware on the satellite (v2.5.1).
+
+# [v5.2.0] 2023-07-02
+
+## Fixed
+
+- The firmware information event was not triggered even when possible because of an ordering
+  bug in the initializer function.
+- Empty dumps (no TM in time range) will now correctly be completed immediately
+
+## Changed
+
+- PTME was always reset on submode changes. The reset will now only be performed if the actual data
+  rate changes.
+- Add back ACS board code for the EM. Now that the radiation sensor was removed, the image switching
+  issue has disappeared and adding back the ACS board is worth it for the GPS timekeeping.
+
+# [v5.1.0] 2023-06-28
+
+- `eive-tmtc` version v5.1.0
+
+## Changed
+
+- Persistent TM store dumps are now performed in chronological order.
+- Increase Syrlinks RX HK rate to 5.0 seconds during a pass.
+- Various robustness improvements for the heater handler. The heater handler will now only
+  process the command queue if it is not busy with switch commanding which reduces the amount
+  of possible bugs.
+- The heater handler is only able to process messages stricly sequentially now but is scheduled
+  twice in a 0.5 second slot so something like a consecutive heater ON or OFF command can still
+  be handled relatively quickly.
+
+## Added
+
+- Sequence counters for PUS and CFDP packets are now stored persistently across graceful reboots.
+- The PUS packet message type counter will now be incremented properly for each PUS service.
+- Internal error reporter set is now enabled by default and generated every 120 seconds.
+
+# [v5.0.0] 2023-06-26
+
+v3.3.1 and all following version will now be moved to v5.0.0 with the additional changes listed
+here. This was done because the firmware update (v4.0.0) is not working right now and it is not
+known when and how it will be fixed. Because of that, all updates to make the SW work with the new
+firmware, which are limited to a few files will be moved to a dev branch so regular development
+compatible to the old firmware can continue.
+
+TLDR: This version is compatible to the old firmware and some changes which only work with the new
+firmware have been reverted.
+
+## Changed
+
+- Added `sync` syscall in graceful shutdown handler
+- Graceful shutdown is now performed by the reboot watchdog
+- There is now a separate file for the total reboot counter. The reboot watchdog has its own local
+  counters to determine whether a reboot is necessary.
+
+# [v4.0.1] 2023-06-24
+
+## Fixed
+
+- `PusLiveDemux` packet demultiplexing bugfix where the demultiplexing did not work when there was
+  only one destination available.
+
+# [v4.0.0] 2023-06-22
+
+- `eive-tmtc` version v5.0.0
+- `q7s-package` version v3.1.1
+
+## Fixed
+
+- Important bugfixes for PTME. See `q7s-package` CHANGELOG.
+- TCS fixes: Set temperature values to invalid value for MAX31865 RTD handler, SUS handler
+  and STR handler. Also set dataset to invakid for RTD handler.
+- Fixed H parameter in SUS converter from 1 mm to 2.5 mm.
+
+## Changed
+
+- Removed PTME busy/ready signals. Those were not used anyway because register reads are used now.
+- APB bus access busy checking is not done anymore as this is performed by the bus itself now.
+- Core controller will now announce version and image information event in addition to reboot
+  event in the `inititalize` function.
+- Core controller will now try to request and announce the firmware version in addition to the
+  OBSW version as well.
+- Added core controller action to read reboot mechansm information
+- GNSS reset pin will now only be asserted for 5 ms instead of 100 ms.
+
+## Added
+
+- Added PL I2C reset pin. It is not used/connected for now but could be used for FDIR procedures to
+  restore the PL I2C.
+- Core controller now announces firmware version as well when requesting a version info event
+
+# [v3.3.1] 2023-06-22
+
+## Fixed
+
+- `PusLiveDemux` packet demultiplexing bugfix where the demultiplexing did not work when there was
+  only one destination available.
+
+## Fixed
+
+- Fixed H parameter in SUS converter from 1 mm to 2.5 mm.
+
+# [v3.3.0] 2023-06-21
+
+Like v3.2.0 but without the custom FM changes related to VC0.
+
+# [v3.2.0] 2023-06-21
+
+## Fixed
+
+- Fix sun vector calculation
+- SUS total vector was not reset to being a zero vector during eclipse due to a wrong memcpy
+  length.
+
+## Changed
+
+- Reverted all changes related to VC0 handling to avoid FM bug possibly related to FPGA bug.
+
+# [v3.1.1] 2023-06-14
+
+## Fixed
+
+- TMP1075 bugfix where negative temperatures could not be measured because of a two's-complement
+  conversion bug.
+
+# [v3.1.0] 2023-06-14
+
+- `eive-tmtc` version v4.1.0
+
+## Fixed
+
+- TCS heater switch enumeration naming was old/wrong and was not updated in sync with the object ID
+  update. This lead to the TCS controller commanding the wrong heaters.
+
+## Changed
+
+- Increase number of allowed parallel HK commands to 16
+
+## Added
+
+- Added `CONFIG_SET`, `MAN_HEATER_ON` and `MAN_HEATER_OFF` support for the BPX battery handler
+
+# [v3.0.0] 2023-06-11
+
+- `eive-tmtc` version v4.0.0
+
+## Changed
+
+- Adapt EM configuration to include all GomSpace PCDU devices except the ACU. For the ACU
+  (which broke), a dummy will still be used.
+- Event Manager queue depth is configurable now.
+- Do not construct and schedule broken TMP1075 device anymore.
+- Do not track payload modes in system mode tables.
+- ACS modes derived from system modes.
+- The CMake build generator will now search for the cross-compiler binaries in the environmental
+  variable named `CROSS_COMPILE_BIN_PATH` first when setting up the build system. This prevents
+  CMake from selecting wrong cross-compilers if multiple cross-compilers with the same name are used
+  on the same system.
+- Add ACS board for EM by default now.
+- Add support for MPSoC HK packet.
+- Add support for MPSoC Flash Directory Content Report.
+- Dynamically enable and disable HK packets for MPSoC on `ON` and `OFF` commands.
+- Add support for MPSoC Flash Directory Content Report.
+- Larger allowed path and file sizes for STR and PLOC MPSoC modules.
+- More robust MPSoC flash read and write command data handling.
+- Increase frequency of payload handlers from 0.8 seconds to 0.5 seconds.
+- Disable missed deadlines per default. Not useful in orbit, and triggers all the time on the EM
+  build after a number of subsequent runs, without any apparent reason (deadlines are not actually
+  missed, thread usage displayed is nominal)
+- TM store dumpes will not be cancelled anymore if the transmitter is off. The dump can be cancelled
+  with an OFF command, and the PTME is perfectly capable of dumping without the transmitter being
+  on.
+- Transmitter state is not taken into account anymore for writing into the PTME. The PTME should
+  be perfectly capable of generating a valid CADU, even when the transmitter is not ON for any
+  reason.
+- OFF mode is ignores in TM store for determining whether a store will be written. The modes will
+  only be used to cancel a transfer.
+- Handling of multiple RWs in the ACS Controller is improved and can be changed by parameter
+  commands.
+- The Directory Listing direct dumper now has a state machine to stagger the directory listing dump.
+  This is required because very large dumps will overload the queue capacities in the framework.
+- The PUS Service 8 now has larger queue sizes to handle more action replies. The PUS Service 1
+  also has a larger queue size to handle a lot of step replies now.
+- Moved PDU `vcc` and `vbat` variable from auxiliary dataset to core dataset.
+- Tweak TCP/IP configuration: Only the TCP server will be included on the EM. For the FM, no
+  TCP/IP servers will be included by default.
+
+## Added
+
+- Add the remaining system modes.
+- PLOC MPSoC flash read command working.
+- BPX battery handler is added for EM by default.
+- ACU dummy HK sets
+- IMTQ HK sets
+- IMTQ dummy now handles power switch
+- Added some new ACS parameters
+- Enabled decimation filter for the ADIS GYRs
+- Enabled second low-pass filter for L3GD20H GYRs
+
+## Fixed
+
+- CFDP low level protocol bugfix. Requires `fsfw` update and `tmtc` update.
+- Compile fix if SCEX is compiled for the EM.
+- Set up Rad Sensor chip select even for EM to avoid SPI bus issues.
+- Correct ADIS Gyroscope type configuration for the EM, where the 16507 type is used instead of the
+  16505 type.
+- Host build is working again. Added reduced live TM helper which schedules the PUS and CFDP
+  funnel.
+- PLOC Supervisor handler now has a power switcher assigned to make PLOC power switching work
+  without an additional PCDU power switch command.
+- The PLOC Supervisor handler now waits for the replies to the `SET_TIME` command to verify working
+  communication.
+- The PLOC MPSoC now waits 10 cycles before going to on. These wait cycles are necessary because
+  the MPSoC is not ready to process commands without this additional boot time.
+- Fixed correction for `GPS Altitude` in case the sensor data is out of the expected bonds.
+- PLOC MPSoC special communication is now scheduled, which allows flash read and flash write
+  commands to work.
+- Fixed the MPSoC flash write command.
+- Added missing ACS parameter.
+- HK TM store: The HK store dump success event was triggered for cancelled HK dumps.
+- When a PUS parsing error occured while parsing a TM store file, the dump completion procedure
+  was always executed.
+- Some smaller logic fixes in the TM store base class
+- Fixed usage of C `abs` instead of C++ `std::abs`, which results in MTQ commands not being
+  scaled correctly between 1Am² and 0.2Am².
+- TCS Heater Handler: Always trigger mode event if a heater goes `OFF` or `ON`. This event might
+  soon replace the `HEATER_WENT_ON` and `HEATER_WENT_OFF` events.
+- Prevent spam of TCS controller heater unavailability event if all heaters are in external control.
+- TCS heater switch info set contained invalid values because of a faulty `memcpy` in the TCS
+  controller. There is not crash risk but the heater states were invalid.
+- STR datasets were not set to invalid on shutdown.
+- Fixed usage of quaternion valid flag, which does not actually represent the validity of the
+  quaternion.
+- Various fixes for the pointing modes of the `ACS Controller`. All modes should work now as
+  intended.
+- The variance for the ADIS GYRs now represents the used `-3` version and not the `-1` version
+- CFDP funnel did not route packets to live channel VC0
+
+# [v2.0.5] 2023-05-11
+
+- The dual lane assembly transition failed handler started new transitions towards the current mode
+  instead of the target mode. This means that if the dual lane assembly never reached the initial
+  submode (e.g. mode normal and submode dual side), it will transition back to the current mode,
+  which miht be `MODE_OFF`. Furthermore, this can lead to invalid internal states, so the subsequent
+  recovery handling becomes stuck in the custom recovery sequence when swichting power back on.
+- The dual lane custom recovery handling was adapted to always perform proper power switch handling
+  irrespective of current or target modes.
+
+# [v2.0.4] 2023-04-19
+
+## Fixed
+
+- The dual lane assembly datasets were not marked invalid properly on OFF transitions.
+
+# [v2.0.3] 2023-04-17
+
+- eive-tmtc: v3.1.1
+
+## Fixed
+
+- Fixed shadowing within the `SafeCtrl`, which prevented actuator commands to be calculated during
+  eclipse phase.
+- EM build idle mode fixes for RW dummy.
+
+## Added
+
+- Add `MGT_OVERHEATING` event and fallback to system SAFE mode if the MGT is overheating for
+  whatever reason.
+
+## Changed
+
+- Low-pass filters can no longer be executed if no actual data is available.
+
+# [v2.0.2] 2023-04-16
+
+- Bump patch version to 2.
+
+# [v2.0.1] 2023-04-16
+
+- eive-tmtc: v3.1.0
+
+# [v2.0.0] 2023-04-16
+
+This is the version which will fly on the satellite for the initial launch phase.
+
+- q7s-package: v2.5.0
+- eive-tmtc: v3.0.0
+- `wire` library is now on version v10.7 as well.
+
+## Added
+
+- Added `mv`, `cp` and `rm` action helpers for the core controller for common filesystem operations.
+- Extended directory listing helpers. There is now a directory listing helper which dumps the
+  directory listing as an action data reply immediately. For smaller directory listings, this
+  allows a listing without requiring a separate file downlink (which also has not been implemented
+  yet)
+
+## Changed
+
+- The directory listing action commands now allow compressing of either the target output file
+  for the directory listing into file action command, or compression in the helper which dumps
+  the directory listing directly.
+
 # [v1.45.0] 2023-04-14
 
 - q7s-package: v2.5.0

CMakeLists.txt

@@ -9,8 +9,8 @@
 # ##############################################################################
 cmake_minimum_required(VERSION 3.13)
 
-set(OBSW_VERSION_MAJOR 1)
-set(OBSW_VERSION_MINOR 45)
+set(OBSW_VERSION_MAJOR 6)
+set(OBSW_VERSION_MINOR 0)
 set(OBSW_VERSION_REVISION 0)
 
 # set(CMAKE_VERBOSE TRUE)
@@ -79,12 +79,19 @@ else()
   set(INIT_VAL 1)
   set(OBSW_STAR_TRACKER_GROUND_CONFIG 0)
 endif()
+
+set(OBSW_ADD_TMTC_TCP_SERVER
+    ${OBSW_Q7S_EM}
+    CACHE STRING "Add TCP TMTC Server")
+set(OBSW_ADD_TMTC_UDP_SERVER
+    0
+    CACHE STRING "Add UDP TMTC Server")
 set(OBSW_ADD_MGT
     ${INIT_VAL}
     CACHE STRING "Add MGT module")
 set(OBSW_ADD_BPX_BATTERY_HANDLER
-    ${INIT_VAL}
-    CACHE STRING "Add MGT module")
+    1
+    CACHE STRING "Add BPX battery module")
 set(OBSW_ADD_STAR_TRACKER
     ${INIT_VAL}
     CACHE STRING "Add Startracker module")
@@ -98,7 +105,7 @@ set(OBSW_ADD_THERMAL_TEMP_INSERTER
     ${OBSW_Q7S_EM}
     CACHE STRING "Add thermal sensor temperature inserter")
 set(OBSW_ADD_ACS_BOARD
-    ${INIT_VAL}
+    1
     CACHE STRING "Add ACS board module")
 set(OBSW_ADD_GPS_CTRL
     ${INIT_VAL}
@@ -146,8 +153,11 @@ set(OBSW_ADD_TMP_DEVICES
     ${INIT_VAL}
     CACHE STRING "Add TMP devices")
 set(OBSW_ADD_GOMSPACE_PCDU
-    ${INIT_VAL}
+    1
     CACHE STRING "Add GomSpace PCDU modules")
+set(OBSW_ADD_GOMSPACE_ACU
+    ${INIT_VAL}
+    CACHE STRING "Add GomSpace ACU submodule")
 set(OBSW_ADD_RW
     ${INIT_VAL}
     CACHE STRING "Add RW modules")

README.md

@@ -99,11 +99,21 @@ When using Windows, run theses steps in MSYS2.
    git submodule update --init
    ```
 
-3. Ensure that the cross-compiler is working with `arm-linux-gnueabihf-gcc --version` and that
+3. Create two system variables to pass the system root path and the cross-compiler path to the
+   build system. You only need to do this once when setting up the build system.
+   Example for Unix:
+
+   ```sh
+   export CROSS_COMPILE_BIN_PATH=<absolutePathToCrossCompilerBinPath>
+   export ZYNQ_7020_SYSROOT=<absolutePathToSysroot>
+   ```
+
+4. Ensure that the cross-compiler is working with
+   `${CROSS_COMPILE_BIN_PATH}/arm-linux-gnueabihf-gcc --version` and that
    the sysroot environmental variables have been set like specified in the
    [root filesystem chapter](#sysroot).
 
-4. Run the CMake configuration to create the build system in a `build-Debug-Q7S` folder.
+5. Run the CMake configuration to create the build system in a `build-Debug-Q7S` folder.
    Add `-G "MinGW Makefiles` in MinGW64 on Windows.
 
    ```sh
@@ -112,7 +122,7 @@ When using Windows, run theses steps in MSYS2.
    cmake --build . -j
    ```
 
-   You can also use provided shell scripts to perform these commands.
+   Please note that you can also use provided shell scripts to perform these commands.
    ```sh
    cp scripts/q7s-env.sh ..
    cp scripts/q7s-env-em.sh ..
@@ -144,7 +154,7 @@ When using Windows, run theses steps in MSYS2.
    There are also different values for `-DTGT_BSP` to build for the Raspberry Pi
    or the Beagle Bone Black: `arm/raspberrypi` and `arm/beagleboneblack`.
 
-5. Build the software with
+6. Build the software with
 
    ```sh
    cd cmake-build-debug-q7s
@@ -954,6 +964,12 @@ used by other software components to read the current chip and copy.
 This is a configuration scripts which runs after the Network Time Protocol has run. This script
 currently sets the static IP address `192.168.133.10` and starts the `can` interface.
 
+## Initial boot delay
+
+You can create a file named `boot_delays_secs.txt` inside the home folder to delay the OBSW boot
+for 6 seconds if the file is empty of for the number of seconds specified inside the file. This
+can be helpful if something inside the OBSW leads to an immediate crash of the OBC.
+
 ## PCDU
 
 Connect to serial console of P60 Dock

automation/Jenkinsfile

@@ -22,7 +22,7 @@ pipeline {
             steps {
                 dir(BUILDDIR_Q7S) {
                     sh 'cmake -DTGT_BSP="arm/q7s" -DCMAKE_BUILD_TYPE=Debug ..'
-                    sh 'cmake --build . -j6'
+                    sh 'cmake --build . -j8'
                 }
             }
         }
@@ -30,7 +30,7 @@ pipeline {
             steps {
                 dir(BUILDDIR_Q7S_EM) {
                     sh 'cmake -DTGT_BSP="arm/q7s" -DEIVE_Q7S_EM=ON -DCMAKE_BUILD_TYPE=Debug ..'
-                    sh 'cmake --build . -j6'
+                    sh 'cmake --build . -j8'
                 }
             }
         }
@@ -38,7 +38,7 @@ pipeline {
             steps {
                 dir(BUILDDIR_LINUX) {
                     sh 'cmake ..'
-                    sh 'cmake --build . -j6'
+                    sh 'cmake --build . -j8'
                     sh './eive-unittest'
                 }
             }

bsp_hosted/ObjectFactory.cpp

@@ -39,7 +39,7 @@
 #include "devices/gpioIds.h"
 #include "fsfw_hal/linux/gpio/Gpio.h"
 #include "linux/payload/PlocMpsocHandler.h"
-#include "linux/payload/PlocMpsocHelper.h"
+#include "linux/payload/PlocMpsocSpecialComHelper.h"
 #include "linux/payload/PlocSupervisorHandler.h"
 #include "linux/payload/PlocSupvUartMan.h"
 #include "test/gpio/DummyGpioIF.h"
@@ -62,10 +62,15 @@ void ObjectFactory::produce(void* args) {
   StorageManagerIF* tmStore;
   StorageManagerIF* ipcStore;
   PersistentTmStores persistentStores;
+  bool enableHkSets = false;
+#if OBSW_ENABLE_PERIODIC_HK == 1
+  enableHkSets = true;
+#endif
   auto sdcMan = new DummySdCardManager("/tmp");
   ObjectFactory::produceGenericObjects(nullptr, &pusFunnel, &cfdpFunnel, *sdcMan, &ipcStore,
-                                       &tmStore, persistentStores);
+                                       &tmStore, persistentStores, 120, enableHkSets);
 
+  new TmFunnelHandler(objects::LIVE_TM_TASK, *pusFunnel, *cfdpFunnel);
   auto* dummyGpioIF = new DummyGpioIF();
   auto* dummySwitcher = new DummyPowerSwitcher(objects::PCDU_HANDLER, 18, 0);
   std::vector<ReturnValue_t> switcherList;
@@ -81,8 +86,8 @@ void ObjectFactory::produce(void* args) {
   auto mpsocCookie = new UartCookie(objects::PLOC_MPSOC_HANDLER, mpscoDev, uart::PLOC_MPSOC_BAUD,
                                     mpsoc::MAX_REPLY_SIZE, UartModes::NON_CANONICAL);
   mpsocCookie->setNoFixedSizeReply();
-  auto plocMpsocHelper = new PlocMPSoCHelper(objects::PLOC_MPSOC_HELPER);
-  new PlocMPSoCHandler(objects::PLOC_MPSOC_HANDLER, objects::UART_COM_IF, mpsocCookie,
+  auto plocMpsocHelper = new PlocMpsocSpecialComHelper(objects::PLOC_MPSOC_HELPER);
+  new PlocMpsocHandler(objects::PLOC_MPSOC_HANDLER, objects::UART_COM_IF, mpsocCookie,
                        plocMpsocHelper, Gpio(gpioIds::ENABLE_MPSOC_UART, dummyGpioIF),
                        objects::PLOC_SUPERVISOR_HANDLER);
 #endif /* OBSW_ADD_PLOC_MPSOC == 1 */
@@ -100,7 +105,7 @@ void ObjectFactory::produce(void* args) {
 #endif
 
   dummy::DummyCfg cfg;
-  dummy::createDummies(cfg, *dummySwitcher, dummyGpioIF);
+  dummy::createDummies(cfg, *dummySwitcher, dummyGpioIF, enableHkSets);
 
   HeaterHandler* heaterHandler = nullptr;
   // new ThermalController(objects::THERMAL_CONTROLLER);

bsp_hosted/fsfwconfig/events/translateEvents.cpp

@@ -1,7 +1,7 @@
 /**
- * @brief    Auto-generated event translation file. Contains 290 translations.
+ * @brief    Auto-generated event translation file. Contains 296 translations.
  * @details
- * Generated on: 2023-04-14 20:23:17
+ * Generated on: 2023-06-21 19:01:02
  */
 #include "translateEvents.h"
 
@@ -197,6 +197,10 @@ const char *MPSOC_EXE_INVALID_APID_STRING = "MPSOC_EXE_INVALID_APID";
 const char *MPSOC_HELPER_SEQ_CNT_MISMATCH_STRING = "MPSOC_HELPER_SEQ_CNT_MISMATCH";
 const char *MPSOC_TM_SIZE_ERROR_STRING = "MPSOC_TM_SIZE_ERROR";
 const char *MPSOC_TM_CRC_MISSMATCH_STRING = "MPSOC_TM_CRC_MISSMATCH";
+const char *MPSOC_FLASH_READ_PACKET_ERROR_STRING = "MPSOC_FLASH_READ_PACKET_ERROR";
+const char *MPSOC_FLASH_READ_FAILED_STRING = "MPSOC_FLASH_READ_FAILED";
+const char *MPSOC_FLASH_READ_SUCCESSFUL_STRING = "MPSOC_FLASH_READ_SUCCESSFUL";
+const char *MPSOC_READ_TIMEOUT_STRING = "MPSOC_READ_TIMEOUT";
 const char *TRANSITION_BACK_TO_OFF_STRING = "TRANSITION_BACK_TO_OFF";
 const char *NEG_V_OUT_OF_BOUNDS_STRING = "NEG_V_OUT_OF_BOUNDS";
 const char *U_DRO_OUT_OF_BOUNDS_STRING = "U_DRO_OUT_OF_BOUNDS";
@@ -273,6 +277,7 @@ const char *INDIVIDUAL_BOOT_COUNTS_STRING = "INDIVIDUAL_BOOT_COUNTS";
 const char *TRYING_I2C_RECOVERY_STRING = "TRYING_I2C_RECOVERY";
 const char *I2C_REBOOT_STRING = "I2C_REBOOT";
 const char *PDEC_REBOOT_STRING = "PDEC_REBOOT";
+const char *FIRMWARE_INFO_STRING = "FIRMWARE_INFO";
 const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
 const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
 const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
@@ -280,6 +285,7 @@ const char *OBC_OVERHEATING_STRING = "OBC_OVERHEATING";
 const char *CAMERA_OVERHEATING_STRING = "CAMERA_OVERHEATING";
 const char *PCDU_SYSTEM_OVERHEATING_STRING = "PCDU_SYSTEM_OVERHEATING";
 const char *HEATER_NOT_OFF_FOR_OFF_MODE_STRING = "HEATER_NOT_OFF_FOR_OFF_MODE";
+const char *MGT_OVERHEATING_STRING = "MGT_OVERHEATING";
 const char *TX_TIMER_EXPIRED_STRING = "TX_TIMER_EXPIRED";
 const char *BIT_LOCK_TX_ON_STRING = "BIT_LOCK_TX_ON";
 const char *POSSIBLE_FILE_CORRUPTION_STRING = "POSSIBLE_FILE_CORRUPTION";
@@ -682,6 +688,14 @@ const char *translateEvents(Event event) {
       return MPSOC_TM_SIZE_ERROR_STRING;
     case (12613):
       return MPSOC_TM_CRC_MISSMATCH_STRING;
+    case (12614):
+      return MPSOC_FLASH_READ_PACKET_ERROR_STRING;
+    case (12615):
+      return MPSOC_FLASH_READ_FAILED_STRING;
+    case (12616):
+      return MPSOC_FLASH_READ_SUCCESSFUL_STRING;
+    case (12617):
+      return MPSOC_READ_TIMEOUT_STRING;
     case (12700):
       return TRANSITION_BACK_TO_OFF_STRING;
     case (12701):
@@ -834,6 +848,8 @@ const char *translateEvents(Event event) {
       return I2C_REBOOT_STRING;
     case (14012):
       return PDEC_REBOOT_STRING;
+    case (14013):
+      return FIRMWARE_INFO_STRING;
     case (14100):
       return NO_VALID_SENSOR_TEMPERATURE_STRING;
     case (14101):
@@ -848,6 +864,8 @@ const char *translateEvents(Event event) {
       return PCDU_SYSTEM_OVERHEATING_STRING;
     case (14107):
       return HEATER_NOT_OFF_FOR_OFF_MODE_STRING;
+    case (14108):
+      return MGT_OVERHEATING_STRING;
     case (14201):
       return TX_TIMER_EXPIRED_STRING;
     case (14202):

bsp_hosted/fsfwconfig/objects/translateObjects.cpp

@@ -2,7 +2,7 @@
  * @brief  Auto-generated object translation file.
  * @details
  * Contains 171 translations.
- * Generated on: 2023-04-14 20:23:17
+ * Generated on: 2023-06-21 19:01:02
  */
 #include "translateObjects.h"
 

bsp_hosted/scheduling.cpp

@@ -59,19 +59,15 @@ void scheduling::initTasks() {
       "DIST", 60, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.2, missedDeadlineFunc);
   ReturnValue_t result = tmtcDistributor->addComponent(objects::CCSDS_PACKET_DISTRIBUTOR);
   if (result != returnvalue::OK) {
-    sif::error << "adding CCSDS distributor failed" << std::endl;
+    sif::error << "Adding CCSDS distributor failed" << std::endl;
   }
   result = tmtcDistributor->addComponent(objects::PUS_PACKET_DISTRIBUTOR);
   if (result != returnvalue::OK) {
-    sif::error << "adding PUS distributor failed" << std::endl;
-  }
-  result = tmtcDistributor->addComponent(objects::TM_FUNNEL);
-  if (result != returnvalue::OK) {
-    sif::error << "adding TM funnel failed" << std::endl;
+    sif::error << "Adding PUS distributor failed" << std::endl;
   }
   result = tmtcDistributor->addComponent(objects::CFDP_DISTRIBUTOR);
   if (result != returnvalue::OK) {
-    sif::error << "adding CFDP distributor failed" << std::endl;
+    sif::error << "Adding CFDP distributor failed" << std::endl;
   }
   result = tmtcDistributor->addComponent(objects::UDP_TMTC_SERVER);
   if (result != returnvalue::OK) {
@@ -95,6 +91,13 @@ void scheduling::initTasks() {
     sif::error << "Add component UDP Polling failed" << std::endl;
   }
 
+  PeriodicTaskIF* liveTmTask = factory->createPeriodicTask(
+      "LIVE_TM", 55, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.4, nullptr, &RR_SCHEDULING);
+  result = liveTmTask->addComponent(objects::LIVE_TM_TASK);
+  if (result != returnvalue::OK) {
+    scheduling::printAddObjectError("LIVE_TM", objects::LIVE_TM_TASK);
+  }
+
   PeriodicTaskIF* pusHighPrio = factory->createPeriodicTask(
       "PUS_HIGH_PRIO", 60, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.200, missedDeadlineFunc);
   result = pusHighPrio->addComponent(objects::PUS_SERVICE_1_VERIFICATION);
@@ -149,7 +152,7 @@ void scheduling::initTasks() {
       "THERMAL_CTL_TASK", 40, PeriodicTaskIF::MINIMUM_STACK_SIZE, 1.0, missedDeadlineFunc);
   result = thermalTask->addComponent(objects::CORE_CONTROLLER);
   if (result != returnvalue::OK) {
-    scheduling::printAddObjectError("Core controller dummy", objects::CORE_CONTROLLER);
+    scheduling::printAddObjectError("CORE_CTRL", objects::CORE_CONTROLLER);
   }
   result = thermalTask->addComponent(objects::THERMAL_CONTROLLER);
   if (result != returnvalue::OK) {
@@ -217,6 +220,7 @@ void scheduling::initTasks() {
   tmtcDistributor->startTask();
   udpPollingTask->startTask();
   tcpPollingTask->startTask();
+  liveTmTask->startTask();
 
   pusHighPrio->startTask();
   pusMedPrio->startTask();

bsp_q7s/OBSWConfig.h.in

@@ -22,6 +22,9 @@
 #define OBSW_COMMAND_SAFE_MODE_AT_STARTUP           1
 
 #define OBSW_ADD_GOMSPACE_PCDU                      @OBSW_ADD_GOMSPACE_PCDU@
+// This define is necessary because the EM setup has the P60 dock module, but no ACU on the P60
+// module because it broke.
+#define OBSW_ADD_GOMSPACE_ACU                       @OBSW_ADD_GOMSPACE_ACU@
 #define OBSW_ADD_MGT                                @OBSW_ADD_MGT@
 #define OBSW_ADD_BPX_BATTERY_HANDLER                @OBSW_ADD_BPX_BATTERY_HANDLER@
 #define OBSW_ADD_STAR_TRACKER                       @OBSW_ADD_STAR_TRACKER@
@@ -64,12 +67,12 @@
 // because UDP packets are not allowed in the VPN
 // This will cause the OBSW to initialize the TMTC bridge responsible for exchanging data with the
 // CCSDS IP Cores. 
-#define OBSW_ADD_TMTC_TCP_SERVER                    1
-#define OBSW_ADD_TMTC_UDP_SERVER                    1
+#define OBSW_ADD_TMTC_TCP_SERVER                    @OBSW_ADD_TMTC_TCP_SERVER@
+#define OBSW_ADD_TMTC_UDP_SERVER                    @OBSW_ADD_TMTC_UDP_SERVER@
 
 // Can be used to switch device to NORMAL mode immediately
 #define OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP    0
-#define OBSW_PRINT_MISSED_DEADLINES                 1
+#define OBSW_PRINT_MISSED_DEADLINES                 0
 
 #define OBSW_MPSOC_JTAG_BOOT                        0
 #define OBSW_STAR_TRACKER_GROUND_CONFIG             @OBSW_STAR_TRACKER_GROUND_CONFIG@

bsp_q7s/boardconfig/busConf.h

@@ -23,6 +23,7 @@ static constexpr char UART_SCEX_DEV[] = "/dev/scex";
 static constexpr char UIO_PDEC_REGISTERS[] = "/dev/uio_pdec_regs";
 static constexpr char UIO_PTME[] = "/dev/uio_ptme";
 static constexpr char UIO_PDEC_CONFIG_MEMORY[] = "/dev/uio_pdec_cfg_mem";
+static constexpr char UIO_SYS_ROM[] = "/dev/uio_sys_rom";
 static constexpr char UIO_PDEC_RAM[] = "/dev/uio_pdec_ram";
 static constexpr char UIO_PDEC_IRQ[] = "/dev/uio_pdec_irq";
 static constexpr int MAP_ID_PTME_CONFIG = 3;
@@ -57,6 +58,7 @@ static constexpr char GYRO_0_ENABLE[] = "enable_gyro_0";
 static constexpr char GYRO_2_ENABLE[] = "enable_gyro_2";
 static constexpr char GNSS_SELECT[] = "gnss_mux_select";
 static constexpr char GNSS_MUX_SELECT[] = "gnss_mux_select";
+static constexpr char PL_I2C_ARESETN[] = "pl_i2c_aresetn";
 
 static constexpr char HEATER_0[] = "heater0";
 static constexpr char HEATER_1[] = "heater1";
@@ -82,14 +84,12 @@ static constexpr char EN_RW_4[] = "enable_rw_4";
 
 static constexpr char RAD_SENSOR_CHIP_SELECT[] = "rad_sensor_chip_select";
 static constexpr char ENABLE_RADFET[] = "enable_radfet";
-static constexpr char PAPB_BUSY_SIGNAL_VC0[] = "papb_busy_signal_vc0";
+
 static constexpr char PAPB_EMPTY_SIGNAL_VC0[] = "papb_empty_signal_vc0";
-static constexpr char PAPB_BUSY_SIGNAL_VC1[] = "papb_busy_signal_vc1";
 static constexpr char PAPB_EMPTY_SIGNAL_VC1[] = "papb_empty_signal_vc1";
-static constexpr char PAPB_BUSY_SIGNAL_VC2[] = "papb_busy_signal_vc2";
 static constexpr char PAPB_EMPTY_SIGNAL_VC2[] = "papb_empty_signal_vc2";
-static constexpr char PAPB_BUSY_SIGNAL_VC3[] = "papb_busy_signal_vc3";
 static constexpr char PAPB_EMPTY_SIGNAL_VC3[] = "papb_empty_signal_vc3";
+
 static constexpr char PTME_RESETN[] = "ptme_resetn";
 
 static constexpr char RS485_EN_TX_CLOCK[] = "tx_clock_enable_ltc2872";

bsp_q7s/core/CoreController.h

@@ -6,6 +6,7 @@
 #include <fsfw/globalfunctions/PeriodicOperationDivider.h>
 #include <fsfw/parameters/ParameterHelper.h>
 #include <fsfw/parameters/ReceivesParameterMessagesIF.h>
+#include <fsfw_hal/linux/uio/UioMapper.h>
 #include <libxiphos.h>
 #include <mission/acs/archive/GPSDefinitions.h>
 #include <mission/utility/trace.h>
@@ -23,7 +24,7 @@
 class Timer;
 class SdCardManager;
 
-struct RebootFile {
+struct RebootWatchdogFile {
   static constexpr uint8_t DEFAULT_MAX_BOOT_CNT = 10;
 
   bool enabled = true;
@@ -44,6 +45,93 @@ struct RebootFile {
   xsc::Copy mechanismNextCopy = xsc::Copy::NO_COPY;
 };
 
+class RebootWatchdogPacket : public SerialLinkedListAdapter<SerializeIF> {
+ public:
+  RebootWatchdogPacket(RebootWatchdogFile& rf) {
+    enabled = rf.enabled;
+    maxCount = rf.maxCount;
+    img00Count = rf.img00Cnt;
+    img01Count = rf.img01Cnt;
+    img10Count = rf.img10Cnt;
+    img11Count = rf.img11Cnt;
+    img00Lock = rf.img00Lock;
+    img01Lock = rf.img01Lock;
+    img10Lock = rf.img10Lock;
+    img11Lock = rf.img11Lock;
+    lastChip = static_cast<uint8_t>(rf.lastChip);
+    lastCopy = static_cast<uint8_t>(rf.lastCopy);
+    nextChip = static_cast<uint8_t>(rf.mechanismNextChip);
+    nextCopy = static_cast<uint8_t>(rf.mechanismNextCopy);
+    setLinks();
+  }
+
+ private:
+  void setLinks() {
+    setStart(&enabled);
+    enabled.setNext(&maxCount);
+    maxCount.setNext(&img00Count);
+    img00Count.setNext(&img01Count);
+    img01Count.setNext(&img10Count);
+    img10Count.setNext(&img11Count);
+    img11Count.setNext(&img00Lock);
+    img00Lock.setNext(&img01Lock);
+    img01Lock.setNext(&img10Lock);
+    img10Lock.setNext(&img11Lock);
+    img11Lock.setNext(&lastChip);
+    lastChip.setNext(&lastCopy);
+    lastCopy.setNext(&nextChip);
+    nextChip.setNext(&nextCopy);
+    setLast(&nextCopy);
+  }
+
+  SerializeElement<uint8_t> enabled = false;
+  SerializeElement<uint32_t> maxCount = 0;
+  SerializeElement<uint32_t> img00Count = 0;
+  SerializeElement<uint32_t> img01Count = 0;
+  SerializeElement<uint32_t> img10Count = 0;
+  SerializeElement<uint32_t> img11Count = 0;
+  SerializeElement<uint8_t> img00Lock = false;
+  SerializeElement<uint8_t> img01Lock = false;
+  SerializeElement<uint8_t> img10Lock = false;
+  SerializeElement<uint8_t> img11Lock = false;
+  SerializeElement<uint8_t> lastChip = 0;
+  SerializeElement<uint8_t> lastCopy = 0;
+  SerializeElement<uint8_t> nextChip = 0;
+  SerializeElement<uint8_t> nextCopy = 0;
+};
+
+struct RebootCountersFile {
+  // 16 bit values so all boot counters fit into one event.
+  uint16_t img00Cnt = 0;
+  uint16_t img01Cnt = 0;
+  uint16_t img10Cnt = 0;
+  uint16_t img11Cnt = 0;
+};
+
+class RebootCountersPacket : public SerialLinkedListAdapter<SerializeIF> {
+  RebootCountersPacket(RebootCountersFile& rf) {
+    img00Count = rf.img00Cnt;
+    img01Count = rf.img01Cnt;
+    img10Count = rf.img10Cnt;
+    img11Count = rf.img11Cnt;
+    setLinks();
+  }
+
+ private:
+  void setLinks() {
+    setStart(&img00Count);
+    img00Count.setNext(&img01Count);
+    img01Count.setNext(&img10Count);
+    img10Count.setNext(&img11Count);
+    setLast(&img11Count);
+  }
+
+  SerializeElement<uint16_t> img00Count = 0;
+  SerializeElement<uint16_t> img01Count = 0;
+  SerializeElement<uint16_t> img10Count = 0;
+  SerializeElement<uint16_t> img11Count = 0;
+};
+
 class CoreController : public ExtendedControllerBase, public ReceivesParameterMessagesIF {
  public:
   enum ParamId : uint8_t { PREF_SD = 0, NUM_IDS };
@@ -57,15 +145,21 @@ class CoreController : public ExtendedControllerBase, public ReceivesParameterMe
 
   const std::string VERSION_FILE =
       "/" + std::string(core::CONF_FOLDER) + "/" + std::string(core::VERSION_FILE_NAME);
-  const std::string REBOOT_FILE =
-      "/" + std::string(core::CONF_FOLDER) + "/" + std::string(core::REBOOT_FILE_NAME);
+  const std::string LEGACY_REBOOT_WATCHDOG_FILE =
+      "/" + std::string(core::CONF_FOLDER) + "/" +
+      std::string(core::LEGACY_REBOOT_WATCHDOG_FILE_NAME);
+  const std::string REBOOT_WATCHDOG_FILE =
+      "/" + std::string(core::CONF_FOLDER) + "/" + std::string(core::REBOOT_WATCHDOG_FILE_NAME);
   const std::string BACKUP_TIME_FILE =
       "/" + std::string(core::CONF_FOLDER) + "/" + std::string(core::TIME_FILE_NAME);
+  const std::string REBOOT_COUNTERS_FILE =
+      "/" + std::string(core::CONF_FOLDER) + "/" + std::string(core::REBOOT_COUNTER_FILE_NAME);
 
   static constexpr char CHIP_0_COPY_0_MOUNT_DIR[] = "/tmp/mntupdate-xdi-qspi0-nom-rootfs";
   static constexpr char CHIP_0_COPY_1_MOUNT_DIR[] = "/tmp/mntupdate-xdi-qspi0-gold-rootfs";
   static constexpr char CHIP_1_COPY_0_MOUNT_DIR[] = "/tmp/mntupdate-xdi-qspi1-nom-rootfs";
   static constexpr char CHIP_1_COPY_1_MOUNT_DIR[] = "/tmp/mntupdate-xdi-qspi1-gold-rootfs";
+  static constexpr char LIST_DIR_DUMP_WORK_FILE[] = "/tmp/dir_listing.tmp";
 
   static constexpr dur_millis_t INIT_SD_CARD_CHECK_TIMEOUT = 5000;
   static constexpr dur_millis_t DEFAULT_SD_CARD_CHECK_TIMEOUT = 60000;
@@ -141,6 +235,7 @@ class CoreController : public ExtendedControllerBase, public ReceivesParameterMe
 
   static constexpr bool BLOCKING_SD_INIT = false;
 
+  uint32_t* mappedSysRomAddr = nullptr;
   SdCardManager* sdcMan = nullptr;
   MessageQueueIF* eventQueue = nullptr;
 
@@ -176,7 +271,22 @@ class CoreController : public ExtendedControllerBase, public ReceivesParameterMe
     DeviceCommandId_t actionId;
   } sdCommandingInfo;
 
-  RebootFile rebootFile = {};
+  struct DirListingDumpContext {
+    bool active;
+    bool firstDump;
+    size_t dumpedBytes;
+    size_t totalFileSize;
+    size_t listingDataOffset;
+    size_t maxDumpLen;
+    uint32_t segmentIdx;
+    MessageQueueId_t commander = MessageQueueIF::NO_QUEUE;
+    DeviceCommandId_t actionId;
+  };
+  std::array<uint8_t, 1024> dirListingBuf{};
+  DirListingDumpContext dumpContext{};
+
+  RebootWatchdogFile rebootWatchdogFile = {};
+  RebootCountersFile rebootCountersFile = {};
 
   CommandExecutor cmdExecutor;
   SimpleRingBuffer cmdReplyBuf;
@@ -246,10 +356,18 @@ class CoreController : public ExtendedControllerBase, public ReceivesParameterMe
   void currentStateSetter(sd::SdCard sdCard, sd::SdState newState);
   void executeNextExternalSdCommand();
   void checkExternalSdCommandStatus();
-  void performRebootFileHandling(bool recreateFile);
+  void performRebootWatchdogHandling(bool recreateFile);
+  void performRebootCountersHandling(bool recreateFile);
 
   ReturnValue_t actionListDirectoryIntoFile(ActionId_t actionId, MessageQueueId_t commandedBy,
                                             const uint8_t* data, size_t size);
+  ReturnValue_t actionListDirectoryDumpDirectly(ActionId_t actionId, MessageQueueId_t commandedBy,
+                                                const uint8_t* data, size_t size);
+  ReturnValue_t performGracefulShutdown(xsc::Chip targetChip, xsc::Copy targetCopy);
+
+  ReturnValue_t actionListDirectoryCommonCommandCreator(const uint8_t* data, size_t size,
+                                                        std::ostringstream& oss);
+
   ReturnValue_t actionXscReboot(const uint8_t* data, size_t size);
   ReturnValue_t actionReboot(const uint8_t* data, size_t size);
 
@@ -259,14 +377,19 @@ class CoreController : public ExtendedControllerBase, public ReceivesParameterMe
   int handleBootCopyProtAtIndex(xsc::Chip targetChip, xsc::Copy targetCopy, bool protect,
                                 bool& protOperationPerformed, bool selfChip, bool selfCopy,
                                 bool allChips, bool allCopies, uint8_t arrIdx);
-  void determineAndExecuteReboot(RebootFile& rf, bool& needsReboot, xsc::Chip& tgtChip,
-                                 xsc::Copy& tgtCopy);
-  void resetRebootCount(xsc::Chip tgtChip, xsc::Copy tgtCopy);
+  void rebootWatchdogAlgorithm(RebootWatchdogFile& rf, bool& needsReboot, xsc::Chip& tgtChip,
+                               xsc::Copy& tgtCopy);
+  void resetRebootWatchdogCounters(xsc::Chip tgtChip, xsc::Copy tgtCopy);
   void setRebootMechanismLock(bool lock, xsc::Chip tgtChip, xsc::Copy tgtCopy);
-  bool parseRebootFile(std::string path, RebootFile& file);
-  void rewriteRebootFile(RebootFile file);
+  bool parseRebootWatchdogFile(std::string path, RebootWatchdogFile& file);
+  bool parseRebootCountersFile(std::string path, RebootCountersFile& file);
+  void rewriteRebootWatchdogFile(RebootWatchdogFile file);
+  void rewriteRebootCountersFile(RebootCountersFile file);
   void announceBootCounts();
+  void announceVersionInfo();
+  void announceCurrentImageInfo();
   void readHkData();
+  void dirListingDumpHandler();
   bool isNumber(const std::string& s);
 };
 

bsp_q7s/core/ObjectFactory.cpp

@@ -2,6 +2,7 @@
 
 #include <fsfw/devicehandlers/HealthDevice.h>
 #include <fsfw/subsystem/Subsystem.h>
+#include <fsfw/tasks/TaskFactory.h>
 #include <linux/acs/AcsBoardPolling.h>
 #include <linux/acs/GpsHyperionLinuxController.h>
 #include <linux/acs/ImtqPollingTask.h>
@@ -10,10 +11,10 @@
 #include <linux/com/SyrlinksComHandler.h>
 #include <linux/payload/PlocMemoryDumper.h>
 #include <linux/payload/PlocMpsocHandler.h>
-#include <linux/payload/PlocMpsocHelper.h>
+#include <linux/payload/PlocMpsocSpecialComHelper.h>
 #include <linux/payload/PlocSupervisorHandler.h>
 #include <linux/payload/ScexUartReader.h>
-#include <linux/payload/plocMpscoDefs.h>
+#include <linux/payload/plocMpsocHelpers.h>
 #include <linux/power/CspComIF.h>
 #include <mission/acs/GyrL3gCustomHandler.h>
 #include <mission/acs/MgmLis3CustomHandler.h>
@@ -189,7 +190,6 @@ void ObjectFactory::createCommunicationInterfaces(LinuxLibgpioIF** gpioComIF,
   *i2cComIF = new I2cComIF(objects::I2C_COM_IF);
   *uartComIF = new SerialComIF(objects::UART_COM_IF);
   *spiMainComIF = new SpiComIF(objects::SPI_MAIN_COM_IF, q7s::SPI_DEFAULT_DEV, **gpioComIF);
-  //*spiRWComIF = new SpiComIF(objects::SPI_RW_COM_IF, q7s::SPI_RW_DEV, **gpioComIF);
 }
 
 void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher,
@@ -197,7 +197,6 @@ void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchI
   CspCookie* p60DockCspCookie = new CspCookie(P60Dock::MAX_REPLY_SIZE, addresses::P60DOCK, 500);
   CspCookie* pdu1CspCookie = new CspCookie(PDU::MAX_REPLY_SIZE, addresses::PDU1, 500);
   CspCookie* pdu2CspCookie = new CspCookie(PDU::MAX_REPLY_SIZE, addresses::PDU2, 500);
-  CspCookie* acuCspCookie = new CspCookie(ACU::MAX_REPLY_SIZE, addresses::ACU, 500);
 
   auto p60Fdir = new GomspacePowerFdir(objects::P60DOCK_HANDLER);
   P60DockHandler* p60dockhandler = new P60DockHandler(objects::P60DOCK_HANDLER, objects::CSP_COM_IF,
@@ -211,9 +210,12 @@ void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchI
   Pdu2Handler* pdu2handler = new Pdu2Handler(objects::PDU2_HANDLER, objects::CSP_COM_IF,
                                              pdu2CspCookie, pdu2Fdir, enableHkSets);
 
+#if OBSW_ADD_GOMSPACE_ACU == 1
+  CspCookie* acuCspCookie = new CspCookie(ACU::MAX_REPLY_SIZE, addresses::ACU, 500);
   auto acuFdir = new GomspacePowerFdir(objects::ACU_HANDLER);
   ACUHandler* acuhandler = new ACUHandler(objects::ACU_HANDLER, objects::CSP_COM_IF, acuCspCookie,
                                           acuFdir, enableHkSets);
+#endif
   auto pcduHandler = new PcduHandler(objects::PCDU_HANDLER, 50);
 
   /**
@@ -223,7 +225,9 @@ void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchI
   p60dockhandler->setModeNormal();
   pdu1handler->setModeNormal();
   pdu2handler->setModeNormal();
+#if OBSW_ADD_GOMSPACE_ACU == 1
   acuhandler->setModeNormal();
+#endif
   if (pwrSwitcher != nullptr) {
     *pwrSwitcher = pcduHandler;
   }
@@ -237,20 +241,7 @@ void ObjectFactory::createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchI
 
 ReturnValue_t ObjectFactory::createRadSensorComponent(LinuxLibgpioIF* gpioComIF,
                                                       Stack5VHandler& stackHandler) {
-  using namespace gpio;
-  if (gpioComIF == nullptr) {
-    return returnvalue::FAILED;
-  }
-  GpioCookie* gpioCookieRadSensor = new GpioCookie;
-  std::stringstream consumer;
-  consumer << "0x" << std::hex << objects::RAD_SENSOR;
-  GpiodRegularByLineName* gpio = new GpiodRegularByLineName(
-      q7s::gpioNames::RAD_SENSOR_CHIP_SELECT, consumer.str(), Direction::OUT, Levels::HIGH);
-  gpioCookieRadSensor->addGpio(gpioIds::CS_RAD_SENSOR, gpio);
-  gpio = new GpiodRegularByLineName(q7s::gpioNames::ENABLE_RADFET, consumer.str(), Direction::OUT,
-                                    Levels::LOW);
-  gpioCookieRadSensor->addGpio(gpioIds::ENABLE_RADFET, gpio);
-  gpioChecker(gpioComIF->addGpios(gpioCookieRadSensor), "RAD sensor");
+  createRadSensorChipSelect(gpioComIF);
 
   SpiCookie* spiCookieRadSensor =
       new SpiCookie(addresses::RAD_SENSOR, gpioIds::CS_RAD_SENSOR, RAD_SENSOR::READ_SIZE,
@@ -364,7 +355,7 @@ void ObjectFactory::createAcsBoardGpios(GpioCookie& cookie) {
 
 void ObjectFactory::createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF* gpioComIF,
                                              SerialComIF* uartComIF, PowerSwitchIF& pwrSwitcher,
-                                             bool enableHkSets) {
+                                             bool enableHkSets, adis1650x::Type adisType) {
   using namespace gpio;
   GpioCookie* gpioCookieAcsBoard = new GpioCookie();
   createAcsBoardGpios(*gpioCookieAcsBoard);
@@ -450,9 +441,8 @@ void ObjectFactory::createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF*
       new SpiCookie(addresses::GYRO_0_ADIS, gpioIds::GYRO_0_ADIS_CS, adis1650x::MAXIMUM_REPLY_SIZE,
                     spi::DEFAULT_ADIS16507_MODE, spi::DEFAULT_ADIS16507_SPEED);
   spiCookie->setMutexParams(MutexIF::TimeoutType::WAITING, spi::ACS_BOARD_CS_TIMEOUT);
-  auto adisHandler =
-      new GyrAdis1650XHandler(objects::GYRO_0_ADIS_HANDLER, objects::ACS_BOARD_POLLING_TASK,
-                              spiCookie, adis1650x::Type::ADIS16505);
+  auto adisHandler = new GyrAdis1650XHandler(objects::GYRO_0_ADIS_HANDLER,
+                                             objects::ACS_BOARD_POLLING_TASK, spiCookie, adisType);
   fdir = new AcsBoardFdir(objects::GYRO_0_ADIS_HANDLER);
   adisHandler->setCustomFdir(fdir);
   assemblyChildren[4] = adisHandler;
@@ -485,9 +475,8 @@ void ObjectFactory::createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF*
       new SpiCookie(addresses::GYRO_2_ADIS, gpioIds::GYRO_2_ADIS_CS, adis1650x::MAXIMUM_REPLY_SIZE,
                     spi::DEFAULT_ADIS16507_MODE, spi::DEFAULT_ADIS16507_SPEED);
   spiCookie->setMutexParams(MutexIF::TimeoutType::WAITING, spi::ACS_BOARD_CS_TIMEOUT);
-  adisHandler =
-      new GyrAdis1650XHandler(objects::GYRO_2_ADIS_HANDLER, objects::ACS_BOARD_POLLING_TASK,
-                              spiCookie, adis1650x::Type::ADIS16505);
+  adisHandler = new GyrAdis1650XHandler(objects::GYRO_2_ADIS_HANDLER,
+                                        objects::ACS_BOARD_POLLING_TASK, spiCookie, adisType);
   fdir = new AcsBoardFdir(objects::GYRO_2_ADIS_HANDLER);
   adisHandler->setCustomFdir(fdir);
   assemblyChildren[6] = adisHandler;
@@ -517,7 +506,7 @@ void ObjectFactory::createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF*
   debugGps = true;
 #endif
   RESET_ARGS_GNSS.gpioComIF = gpioComIF;
-  RESET_ARGS_GNSS.waitPeriodMs = 100;
+  RESET_ARGS_GNSS.waitPeriodMs = 5;
   auto gpsCtrl = new GpsHyperionLinuxController(objects::GPS_CONTROLLER, objects::NO_OBJECT,
                                                 enableHkSets, debugGps);
   gpsCtrl->setResetPinTriggerFunction(gps::triggerGpioResetPin, &RESET_ARGS_GNSS);
@@ -635,8 +624,8 @@ void ObjectFactory::createPayloadComponents(LinuxLibgpioIF* gpioComIF, PowerSwit
       new SerialCookie(objects::PLOC_MPSOC_HANDLER, q7s::UART_PLOC_MPSOC_DEV,
                        serial::PLOC_MPSOC_BAUD, mpsoc::MAX_REPLY_SIZE, UartModes::NON_CANONICAL);
   mpsocCookie->setNoFixedSizeReply();
-  auto plocMpsocHelper = new PlocMPSoCHelper(objects::PLOC_MPSOC_HELPER);
-  auto* mpsocHandler = new PlocMPSoCHandler(
+  auto plocMpsocHelper = new PlocMpsocSpecialComHelper(objects::PLOC_MPSOC_HELPER);
+  auto* mpsocHandler = new PlocMpsocHandler(
       objects::PLOC_MPSOC_HANDLER, objects::UART_COM_IF, mpsocCookie, plocMpsocHelper,
       Gpio(gpioIds::ENABLE_MPSOC_UART, gpioComIF), objects::PLOC_SUPERVISOR_HANDLER);
   mpsocHandler->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
@@ -656,6 +645,7 @@ void ObjectFactory::createPayloadComponents(LinuxLibgpioIF* gpioComIF, PowerSwit
   auto* supvHandler = new PlocSupervisorHandler(objects::PLOC_SUPERVISOR_HANDLER, supervisorCookie,
                                                 Gpio(gpioIds::ENABLE_SUPV_UART, gpioComIF),
                                                 power::PDU1_CH6_PLOC_12V, *supvHelper);
+  supvHandler->setPowerSwitcher(&pwrSwitch);
   supvHandler->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
 #endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */
   static_cast<void>(consumer);
@@ -741,20 +731,12 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
   // GPIO definitions of signals connected to the virtual channel interfaces of the PTME IP Core
   GpioCookie* gpioCookiePtmeIp = new GpioCookie;
   GpiodRegularByLineName* gpio = nullptr;
-  gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC0, "PAPB VC0");
-  gpioCookiePtmeIp->addGpio(gpioIds::VC0_PAPB_BUSY, gpio);
   gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC0, "PAPB VC0");
   gpioCookiePtmeIp->addGpio(gpioIds::VC0_PAPB_EMPTY, gpio);
-  gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC1, "PAPB VC1");
-  gpioCookiePtmeIp->addGpio(gpioIds::VC1_PAPB_BUSY, gpio);
   gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC1, "PAPB VC1");
   gpioCookiePtmeIp->addGpio(gpioIds::VC1_PAPB_EMPTY, gpio);
-  gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC2, "PAPB VC2");
-  gpioCookiePtmeIp->addGpio(gpioIds::VC2_PAPB_BUSY, gpio);
   gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC2, "PAPB VC2");
   gpioCookiePtmeIp->addGpio(gpioIds::VC2_PAPB_EMPTY, gpio);
-  gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_BUSY_SIGNAL_VC3, "PAPB VC3");
-  gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_BUSY, gpio);
   gpio = new GpiodRegularByLineName(q7s::gpioNames::PAPB_EMPTY_SIGNAL_VC3, "PAPB VC3");
   gpioCookiePtmeIp->addGpio(gpioIds::VC3_PAPB_EMPTY, gpio);
   gpio = new GpiodRegularByLineName(q7s::gpioNames::PTME_RESETN, "PTME RESETN",
@@ -763,18 +745,14 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
   gpioChecker(args.gpioComIF.addGpios(gpioCookiePtmeIp), "PTME PAPB VCs");
 
   // Creating virtual channel interfaces
-  VirtualChannelIF* vc0 =
-      new PapbVcInterface(&args.gpioComIF, gpioIds::VC0_PAPB_BUSY, gpioIds::VC0_PAPB_EMPTY,
-                          q7s::UIO_PTME, q7s::uiomapids::PTME_VC0);
-  VirtualChannelIF* vc1 =
-      new PapbVcInterface(&args.gpioComIF, gpioIds::VC1_PAPB_BUSY, gpioIds::VC1_PAPB_EMPTY,
-                          q7s::UIO_PTME, q7s::uiomapids::PTME_VC1);
-  VirtualChannelIF* vc2 =
-      new PapbVcInterface(&args.gpioComIF, gpioIds::VC2_PAPB_BUSY, gpioIds::VC2_PAPB_EMPTY,
-                          q7s::UIO_PTME, q7s::uiomapids::PTME_VC2);
-  VirtualChannelIF* vc3 =
-      new PapbVcInterface(&args.gpioComIF, gpioIds::VC3_PAPB_BUSY, gpioIds::VC3_PAPB_EMPTY,
-                          q7s::UIO_PTME, q7s::uiomapids::PTME_VC3);
+  VirtualChannelIF* vc0 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC0_PAPB_EMPTY,
+                                              q7s::UIO_PTME, q7s::uiomapids::PTME_VC0);
+  VirtualChannelIF* vc1 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC1_PAPB_EMPTY,
+                                              q7s::UIO_PTME, q7s::uiomapids::PTME_VC1);
+  VirtualChannelIF* vc2 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC2_PAPB_EMPTY,
+                                              q7s::UIO_PTME, q7s::uiomapids::PTME_VC2);
+  VirtualChannelIF* vc3 = new PapbVcInterface(&args.gpioComIF, gpioIds::VC3_PAPB_EMPTY,
+                                              q7s::UIO_PTME, q7s::uiomapids::PTME_VC3);
   // Creating ptme object and adding virtual channel interfaces
   Ptme* ptme = new Ptme(objects::PTME);
   ptme->addVcInterface(ccsds::VC0, vc0);
@@ -816,7 +794,7 @@ ReturnValue_t ObjectFactory::createCcsdsComponents(CcsdsComponentArgs& args) {
   // Core task which handles the HK store and takes care of dumping it as TM using a VC directly
   auto* hkStore = new PersistentSingleTmStoreTask(
       objects::HK_STORE_AND_TM_TASK, args.ipcStore, *args.stores.hkStore, *vc,
-      persTmStore::DUMP_HK_STORE_DONE, persTmStore::DUMP_HK_STORE_DONE, *SdCardManager::instance(),
+      persTmStore::DUMP_HK_STORE_DONE, persTmStore::DUMP_HK_CANCELLED, *SdCardManager::instance(),
       PTME_LOCKED);
   hkStore->connectModeTreeParent(satsystem::com::SUBSYSTEM);
 
@@ -1019,3 +997,38 @@ void ObjectFactory::testAcsBrdAss(AcsBoardAssembly* acsAss) {
     sif::warning << "Sending mode command failed" << std::endl;
   }
 }
+
+void ObjectFactory::createRadSensorChipSelect(LinuxLibgpioIF* gpioIF) {
+  using namespace gpio;
+  if (gpioIF == nullptr) {
+    return;
+  }
+  GpioCookie* gpioCookieRadSensor = new GpioCookie;
+  std::stringstream consumer;
+  consumer << "0x" << std::hex << objects::RAD_SENSOR;
+  GpiodRegularByLineName* gpio = new GpiodRegularByLineName(
+      q7s::gpioNames::RAD_SENSOR_CHIP_SELECT, consumer.str(), Direction::OUT, Levels::HIGH);
+  gpioCookieRadSensor->addGpio(gpioIds::CS_RAD_SENSOR, gpio);
+  gpio = new GpiodRegularByLineName(q7s::gpioNames::ENABLE_RADFET, consumer.str(), Direction::OUT,
+                                    Levels::LOW);
+  gpioCookieRadSensor->addGpio(gpioIds::ENABLE_RADFET, gpio);
+  gpioChecker(gpioIF->addGpios(gpioCookieRadSensor), "RAD sensor");
+}
+
+void ObjectFactory::createPlI2cResetGpio(LinuxLibgpioIF* gpioIF) {
+  using namespace gpio;
+  if (common::OBSW_VERSION_MAJOR >= 6 or common::OBSW_VERSION_MAJOR == 4) {
+    if (gpioIF == nullptr) {
+      return;
+    }
+    GpioCookie* gpioI2cResetnCookie = new GpioCookie;
+    GpiodRegularByLineName* gpioI2cResetn = new GpiodRegularByLineName(
+        q7s::gpioNames::PL_I2C_ARESETN, "PL_I2C_ARESETN", Direction::OUT, Levels::HIGH);
+    gpioI2cResetnCookie->addGpio(gpioIds::PL_I2C_ARESETN, gpioI2cResetn);
+    gpioChecker(gpioIF->addGpios(gpioI2cResetnCookie), "PL I2C ARESETN");
+    // Reset I2C explicitely again.
+    gpioIF->pullLow(gpioIds::PL_I2C_ARESETN);
+    TaskFactory::delayTask(1);
+    gpioIF->pullHigh(gpioIds::PL_I2C_ARESETN);
+  }
+}

bsp_q7s/core/ObjectFactory.h

@@ -3,6 +3,7 @@
 
 #include <fsfw/returnvalues/returnvalue.h>
 #include <fsfw_hal/linux/spi/SpiComIF.h>
+#include <mission/acs/gyroAdisHelpers.h>
 #include <mission/com/CcsdsIpCoreHandler.h>
 #include <mission/com/PersistentLogTmStoreTask.h>
 #include <mission/genericFactory.h>
@@ -58,10 +59,12 @@ void createPcduComponents(LinuxLibgpioIF* gpioComIF, PowerSwitchIF** pwrSwitcher
 void createPlPcduComponents(LinuxLibgpioIF* gpioComIF, SpiComIF* spiComIF,
                             PowerSwitchIF* pwrSwitcher, Stack5VHandler& stackHandler);
 void createTmpComponents();
+void createRadSensorChipSelect(LinuxLibgpioIF* gpioIF);
 ReturnValue_t createRadSensorComponent(LinuxLibgpioIF* gpioComIF, Stack5VHandler& handler);
 void createAcsBoardGpios(GpioCookie& cookie);
 void createAcsBoardComponents(SpiComIF& spiComIF, LinuxLibgpioIF* gpioComIF, SerialComIF* uartComIF,
-                              PowerSwitchIF& pwrSwitcher, bool enableHkSets);
+                              PowerSwitchIF& pwrSwitcher, bool enableHkSets,
+                              adis1650x::Type adisType);
 void createHeaterComponents(GpioIF* gpioIF, PowerSwitchIF* pwrSwitcher, HealthTableIF* healthTable,
                             HeaterHandler*& heaterHandler);
 void createImtqComponents(PowerSwitchIF* pwrSwitcher, bool enableHkSets);
@@ -75,6 +78,7 @@ ReturnValue_t createCcsdsComponents(CcsdsComponentArgs& args);
 void createMiscComponents();
 
 void createTestComponents(LinuxLibgpioIF* gpioComIF);
+void createPlI2cResetGpio(LinuxLibgpioIF* gpioComIF);
 
 void testAcsBrdAss(AcsBoardAssembly* assAss);
 

bsp_q7s/core/scheduling.cpp

@@ -324,6 +324,10 @@ void scheduling::initTasks() {
   if (result != returnvalue::OK) {
     scheduling::printAddObjectError("HEATER_HANDLER", objects::HEATER_HANDLER);
   }
+  result = tcsSystemTask->addComponent(objects::HEATER_HANDLER);
+  if (result != returnvalue::OK) {
+    scheduling::printAddObjectError("HEATER_HANDLER", objects::HEATER_HANDLER);
+  }
 
 #if OBSW_ADD_SYRLINKS == 1
   PeriodicTaskIF* syrlinksCom = factory->createPeriodicTask(
@@ -345,7 +349,6 @@ void scheduling::initTasks() {
   }
 #endif /* OBSW_ADD_STAR_TRACKER == 1 */
 
-  // TODO: Use regular scheduler for this task
 #if OBSW_ADD_PLOC_MPSOC == 1
   PeriodicTaskIF* mpsocHelperTask = factory->createPeriodicTask(
       "PLOC_MPSOC_HELPER", 0, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.2, missedDeadlineFunc);
@@ -366,7 +369,7 @@ void scheduling::initTasks() {
 #endif /* OBSW_ADD_PLOC_SUPERVISOR */
 
   PeriodicTaskIF* plTask = factory->createPeriodicTask(
-      "PL_TASK", 25, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.8, missedDeadlineFunc, &RR_SCHEDULING);
+      "PL_TASK", 25, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.5, missedDeadlineFunc, &RR_SCHEDULING);
   plTask->addComponent(objects::CAM_SWITCHER);
   scheduling::addMpsocSupvHandlers(plTask);
   scheduling::scheduleScexDev(plTask);
@@ -472,6 +475,9 @@ void scheduling::initTasks() {
 #if OBSW_ADD_PLOC_SUPERVISOR == 1
   supvHelperTask->startTask();
 #endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */
+#if OBSW_ADD_PLOC_MPSOC == 1
+  mpsocHelperTask->startTask();
+#endif
   plTask->startTask();
 
 #if OBSW_ADD_TEST_CODE == 1

bsp_q7s/em/emObjectFactory.cpp

@@ -36,7 +36,8 @@ void ObjectFactory::produce(void* args) {
 
   PersistentTmStores stores;
   ObjectFactory::produceGenericObjects(&healthTable, &pusFunnel, &cfdpFunnel,
-                                       *SdCardManager::instance(), &ipcStore, &tmStore, stores);
+                                       *SdCardManager::instance(), &ipcStore, &tmStore, stores, 200,
+                                       enableHkSets);
 
   LinuxLibgpioIF* gpioComIF = nullptr;
   SerialComIF* uartComIF = nullptr;
@@ -46,16 +47,26 @@ void ObjectFactory::produce(void* args) {
   /* Adding gpios for chip select decoding to the gpioComIf */
   q7s::gpioCallbacks::initSpiCsDecoder(gpioComIF);
   gpioCallbacks::disableAllDecoder(gpioComIF);
+  createPlI2cResetGpio(gpioComIF);
 
   // Hardware is usually not connected to EM, so we need to create dummies which replace lower
   // level components.
   dummy::DummyCfg dummyCfg;
   dummyCfg.addCoreCtrlCfg = false;
+  dummyCfg.addCamSwitcherDummy = false;
 #if OBSW_ADD_SYRLINKS == 1
   dummyCfg.addSyrlinksDummies = false;
 #endif
+#if OBSW_ADD_PLOC_SUPERVISOR == 1 || OBSW_ADD_PLOC_MPSOC == 1
+  dummyCfg.addPlocDummies = false;
+#endif
 #if OBSW_ADD_GOMSPACE_PCDU == 1
   dummyCfg.addPowerDummies = false;
+  // The ACU broke.
+  dummyCfg.addOnlyAcuDummy = true;
+#endif
+#if OBSW_ADD_BPX_BATTERY_HANDLER == 1
+  dummyCfg.addBpxBattDummy = false;
 #endif
 #if OBSW_ADD_ACS_BOARD == 1
   dummyCfg.addAcsBoardDummies = false;
@@ -69,27 +80,16 @@ void ObjectFactory::produce(void* args) {
 #endif
   satsystem::EIVE_SYSTEM.setI2cRecoveryParams(pwrSwitcher);
 
-  dummy::createDummies(dummyCfg, *pwrSwitcher, gpioComIF);
+  dummy::createDummies(dummyCfg, *pwrSwitcher, gpioComIF, enableHkSets);
 
   new CoreController(objects::CORE_CONTROLLER, enableHkSets);
 
-  // Regular FM code, does not work for EM if the hardware is not connected
-  // createPcduComponents(gpioComIF, &pwrSwitcher);
-  // createPlPcduComponents(gpioComIF, spiMainComIF, pwrSwitcher);
-  // createSyrlinksComponents(pwrSwitcher);
-  // createSunSensorComponents(gpioComIF, spiMainComIF, pwrSwitcher, q7s::SPI_DEFAULT_DEV);
-  // createRtdComponents(q7s::SPI_DEFAULT_DEV, gpioComIF, pwrSwitcher, spiMainComIF);
-  // createTmpComponents();
-  // createSolarArrayDeploymentComponents();
-  // createPayloadComponents(gpioComIF);
-  // createHeaterComponents(gpioComIF, pwrSwitcher, healthTable);
-
-  // TODO: Careful! Switching this on somehow messes with the communication with the ProASIC
-  //       and will cause xsc_boot_copy commands to always boot to 0 0
-  // createRadSensorComponent(gpioComIF);
+  // Initialize chip select to avoid SPI bus issues.
+  createRadSensorChipSelect(gpioComIF);
 
 #if OBSW_ADD_ACS_BOARD == 1
-  createAcsBoardComponents(*spiMainComIF, gpioComIF, uartComIF, *pwrSwitcher);
+  createAcsBoardComponents(*spiMainComIF, gpioComIF, uartComIF, *pwrSwitcher, true,
+                           adis1650x::Type::ADIS16507);
 #else
   // Still add all GPIOs for EM.
   GpioCookie* acsBoardGpios = new GpioCookie();
@@ -117,6 +117,8 @@ void ObjectFactory::produce(void* args) {
   createStrComponents(pwrSwitcher);
 #endif /* OBSW_ADD_STAR_TRACKER == 1 */
 
+  createPayloadComponents(gpioComIF, *pwrSwitcher);
+
 #if OBSW_ADD_CCSDS_IP_CORES == 1
   CcsdsIpCoreHandler* ipCoreHandler = nullptr;
   CcsdsComponentArgs ccsdsArgs(*gpioComIF, *ipcStore, *tmStore, stores, *pusFunnel, *cfdpFunnel,
@@ -125,6 +127,7 @@ void ObjectFactory::produce(void* args) {
 #if OBSW_TM_TO_PTME == 1
   if (ccsdsArgs.liveDestination != nullptr) {
     pusFunnel->addLiveDestination("VC0 LIVE TM", *ccsdsArgs.liveDestination, 0);
+    cfdpFunnel->addLiveDestination("VC0 LIVE TM", *ccsdsArgs.liveDestination, 0);
   }
 #endif
 #endif /* OBSW_ADD_CCSDS_IP_CORES == 1 */
@@ -134,7 +137,7 @@ void ObjectFactory::produce(void* args) {
 #endif /* OBSW_ADD_TEST_CODE == 1 */
 #if OBSW_ADD_SCEX_DEVICE == 1
   createScexComponents(q7s::UART_SCEX_DEV, pwrSwitcher, *SdCardManager::instance(), false,
-                       pcdu::Switches::PDU1_CH5_SOLAR_CELL_EXP_5V);
+                       power::Switches::PDU1_CH5_SOLAR_CELL_EXP_5V);
 #endif
   createAcsController(true, enableHkSets);
   HeaterHandler* heaterHandler;

bsp_q7s/fmObjectFactory.cpp

@@ -1,4 +1,5 @@
 #include <bsp_q7s/callbacks/q7sGpioCallbacks.h>
+#include <devices/gpioIds.h>
 #include <fsfw/storagemanager/LocalPool.h>
 #include <fsfw/storagemanager/PoolManager.h>
 #include <mission/power/gsDefs.h>
@@ -32,7 +33,8 @@ void ObjectFactory::produce(void* args) {
 
   PersistentTmStores stores;
   ObjectFactory::produceGenericObjects(&healthTable, &pusFunnel, &cfdpFunnel,
-                                       *SdCardManager::instance(), &ipcStore, &tmStore, stores);
+                                       *SdCardManager::instance(), &ipcStore, &tmStore, stores, 200,
+                                       true);
 
   LinuxLibgpioIF* gpioComIF = nullptr;
   SerialComIF* uartComIF = nullptr;
@@ -43,6 +45,7 @@ void ObjectFactory::produce(void* args) {
   /* Adding gpios for chip select decoding to the gpioComIf */
   q7s::gpioCallbacks::initSpiCsDecoder(gpioComIF);
   gpioCallbacks::disableAllDecoder(gpioComIF);
+  createPlI2cResetGpio(gpioComIF);
 
   new CoreController(objects::CORE_CONTROLLER, enableHkSets);
   createPcduComponents(gpioComIF, &pwrSwitcher, enableHkSets);
@@ -58,7 +61,8 @@ void ObjectFactory::produce(void* args) {
 #endif
 
 #if OBSW_ADD_ACS_BOARD == 1
-  createAcsBoardComponents(*spiMainComIF, gpioComIF, uartComIF, *pwrSwitcher, true);
+  createAcsBoardComponents(*spiMainComIF, gpioComIF, uartComIF, *pwrSwitcher, true,
+                           adis1650x::Type::ADIS16505);
 #endif
   HeaterHandler* heaterHandler;
   createHeaterComponents(gpioComIF, pwrSwitcher, healthTable, heaterHandler);
@@ -94,6 +98,7 @@ void ObjectFactory::produce(void* args) {
 #if OBSW_TM_TO_PTME == 1
   if (ccsdsArgs.liveDestination != nullptr) {
     pusFunnel->addLiveDestination("VC0 LIVE TM", *ccsdsArgs.liveDestination, 0);
+    cfdpFunnel->addLiveDestination("VC0 LIVE TM", *ccsdsArgs.liveDestination, 0);
   }
 #endif
 #endif /* OBSW_ADD_CCSDS_IP_CORES == 1 */

cmake/Zynq7020CrossCompileConfig.cmake

@@ -40,8 +40,8 @@ set(CROSS_COMPILE_OBJCOPY "${CROSS_COMPILE}-objcopy")
 set(CROSS_COMPILE_SIZE "${CROSS_COMPILE}-size")
 
 # At the very least, cross compile gcc and g++ have to be set!
-find_program (CMAKE_C_COMPILER ${CROSS_COMPILE_CC} REQUIRED)
-find_program (CMAKE_CXX_COMPILER ${CROSS_COMPILE_CXX} REQUIRED)
+find_program (CMAKE_C_COMPILER ${CROSS_COMPILE_CC} HINTS $ENV{CROSS_COMPILE_BIN_PATH} REQUIRED)
+find_program (CMAKE_CXX_COMPILER ${CROSS_COMPILE_CXX} HINTS $ENV{CROSS_COMPILE_BIN_PATH} REQUIRED)
 # Useful utilities, not strictly necessary
 find_program(CMAKE_SIZE ${CROSS_COMPILE_SIZE})
 find_program(CMAKE_OBJCOPY ${CROSS_COMPILE_OBJCOPY})

common/config/devices/gpioIds.h

@@ -77,6 +77,8 @@ enum gpioId_t {
   CS_RAD_SENSOR,
   ENABLE_RADFET,
 
+  PL_I2C_ARESETN,
+
   PAPB_BUSY_N,
   PAPB_EMPTY,
 
@@ -93,15 +95,10 @@ enum gpioId_t {
   EN_RW_CS,
 
   SPI_MUX,
-
   VC0_PAPB_EMPTY,
-  VC0_PAPB_BUSY,
   VC1_PAPB_EMPTY,
-  VC1_PAPB_BUSY,
   VC2_PAPB_EMPTY,
-  VC2_PAPB_BUSY,
   VC3_PAPB_EMPTY,
-  VC3_PAPB_BUSY,
   PTME_RESETN,
 
   PDEC_RESET,

common/config/eive/definitions.h

@@ -11,6 +11,8 @@ static constexpr char SD_1_MOUNT_POINT[] = "/mnt/sd1";
 static constexpr char OBSW_UPDATE_ARCHIVE_FILE_NAME[] = "eive-sw-update.tar.xz";
 static constexpr char STRIPPED_OBSW_BINARY_FILE_NAME[] = "eive-obsw-stripped";
 static constexpr char OBSW_VERSION_FILE_NAME[] = "obsw_version.txt";
+static constexpr char PUS_SEQUENCE_COUNT_FILE[] = "pus-sequence-count.txt";
+static constexpr char CFDP_SEQUENCE_COUNT_FILE[] = "cfdp-sequence-count.txt";
 
 static constexpr char OBSW_PATH[] = "/usr/bin/eive-obsw";
 static constexpr char OBSW_VERSION_FILE_PATH[] = "/usr/share/eive-obsw/obsw_version.txt";
@@ -34,8 +36,8 @@ static constexpr uint32_t STR_IMG_HELPER_QUEUE_SIZE = 50;
 static constexpr uint8_t LIVE_TM = 0;
 
 /* Limits for filename and path checks */
-static constexpr uint32_t MAX_PATH_SIZE = 100;
-static constexpr uint32_t MAX_FILENAME_SIZE = 50;
+static constexpr uint32_t MAX_PATH_SIZE = 200;
+static constexpr uint32_t MAX_FILENAME_SIZE = 100;
 
 static constexpr uint32_t SA_DEPL_INIT_BUFFER_SECS = 120;
 // Burn time for autonomous deployment
@@ -58,7 +60,9 @@ static constexpr uint32_t CFDP_STORE_QUEUE_SIZE = 300;
 
 static constexpr uint32_t MAX_PUS_FUNNEL_QUEUE_DEPTH = 100;
 static constexpr uint32_t MAX_CFDP_FUNNEL_QUEUE_DEPTH = 80;
+static constexpr uint32_t VERIFICATION_SERVICE_QUEUE_DEPTH = 120;
 static constexpr uint32_t HK_SERVICE_QUEUE_DEPTH = 60;
+static constexpr uint32_t ACTION_SERVICE_QUEUE_DEPTH = 60;
 
 static constexpr uint32_t MAX_STORED_CMDS_UDP = 150;
 static constexpr uint32_t MAX_STORED_CMDS_TCP = 180;

dummies/AcuDummy.cpp

@@ -2,8 +2,11 @@
 
 #include <mission/power/gsDefs.h>
 
-AcuDummy::AcuDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
-    : DeviceHandlerBase(objectId, comif, comCookie) {}
+AcuDummy::AcuDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie, bool enableHkSets)
+    : DeviceHandlerBase(objectId, comif, comCookie),
+      coreHk(this),
+      auxHk(this),
+      enableHkSets(enableHkSets) {}
 
 AcuDummy::~AcuDummy() {}
 
@@ -37,7 +40,49 @@ uint32_t AcuDummy::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return
 
 ReturnValue_t AcuDummy::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                                 LocalDataPoolManager &poolManager) {
+  using namespace ACU;
+  localDataPoolMap.emplace(pool::ACU_CURRENT_IN_CHANNELS, new PoolEntry<int16_t>(6));
+  localDataPoolMap.emplace(pool::ACU_VOLTAGE_IN_CHANNELS, new PoolEntry<uint16_t>(6));
+
+  localDataPoolMap.emplace(pool::ACU_VCC, new PoolEntry<uint16_t>({0}));
+  localDataPoolMap.emplace(pool::ACU_VBAT, new PoolEntry<uint16_t>({0}));
+
   localDataPoolMap.emplace(ACU::pool::ACU_TEMPERATURES,
                            new PoolEntry<float>({10.0, 10.0, 10.0}, true));
+
+  localDataPoolMap.emplace(pool::ACU_MPPT_MODE, new PoolEntry<uint8_t>({0}));
+
+  localDataPoolMap.emplace(pool::ACU_VBOOST_IN_CHANNELS, new PoolEntry<uint16_t>(6));
+  localDataPoolMap.emplace(pool::ACU_POWER_IN_CHANNELS, new PoolEntry<uint16_t>(6));
+
+  localDataPoolMap.emplace(pool::ACU_DAC_ENABLES, new PoolEntry<uint8_t>(3));
+  localDataPoolMap.emplace(pool::ACU_DAC_RAW_CHANNELS, new PoolEntry<uint16_t>(6));
+
+  localDataPoolMap.emplace(pool::ACU_BOOTCAUSE, new PoolEntry<uint32_t>({0}));
+  localDataPoolMap.emplace(pool::ACU_BOOTCNT, new PoolEntry<uint32_t>({0}));
+  localDataPoolMap.emplace(pool::ACU_UPTIME, new PoolEntry<uint32_t>({0}));
+  localDataPoolMap.emplace(pool::ACU_RESET_CAUSE, new PoolEntry<uint16_t>({0}));
+  localDataPoolMap.emplace(pool::ACU_MPPT_TIME, new PoolEntry<uint16_t>({0}));
+  localDataPoolMap.emplace(pool::ACU_MPPT_PERIOD, new PoolEntry<uint16_t>({0}));
+
+  localDataPoolMap.emplace(pool::ACU_DEVICES, new PoolEntry<uint8_t>(8));
+  localDataPoolMap.emplace(pool::ACU_DEVICES_STATUS, new PoolEntry<uint8_t>(8));
+
+  localDataPoolMap.emplace(pool::ACU_WDT_CNT_GND, new PoolEntry<uint32_t>({0}));
+  localDataPoolMap.emplace(pool::ACU_WDT_GND_LEFT, new PoolEntry<uint32_t>({0}));
+
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(coreHk.getSid(), enableHkSets, 30.0));
+  poolManager.subscribeForRegularPeriodicPacket(
+      subdp::RegularHkPeriodicParams(auxHk.getSid(), enableHkSets, 6000.0));
   return returnvalue::OK;
 }
+
+LocalPoolDataSetBase *AcuDummy::getDataSetHandle(sid_t sid) {
+  if (sid == coreHk.getSid()) {
+    return &coreHk;
+  } else if (sid == auxHk.getSid()) {
+    return &auxHk;
+  }
+  return nullptr;
+}

dummies/AcuDummy.h

@@ -2,6 +2,7 @@
 #define DUMMIES_ACUDUMMY_H_
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
+#include <mission/power/gsDefs.h>
 
 class AcuDummy : public DeviceHandlerBase {
  public:
@@ -11,10 +12,14 @@ class AcuDummy : public DeviceHandlerBase {
   static const uint8_t SIMPLE_COMMAND_DATA = 1;
   static const uint8_t PERIODIC_REPLY_DATA = 2;
 
-  AcuDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie);
+  AcuDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie, bool enableHkSets);
   virtual ~AcuDummy();
 
  protected:
+  ACU::CoreHk coreHk;
+  ACU::AuxHk auxHk;
+  bool enableHkSets;
+
   void doStartUp() override;
   void doShutDown() override;
   ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t *id) override;
@@ -28,6 +33,7 @@ class AcuDummy : public DeviceHandlerBase {
   uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override;
   ReturnValue_t initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                         LocalDataPoolManager &poolManager) override;
+  LocalPoolDataSetBase *getDataSetHandle(sid_t sid) override;
 };
 
 #endif /* DUMMIES_ACUDUMMY_H_ */

dummies/ImtqDummy.cpp

@@ -2,15 +2,34 @@
 
 #include <mission/acs/imtqHelpers.h>
 
-ImtqDummy::ImtqDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
-    : DeviceHandlerBase(objectId, comif, comCookie) {}
+ImtqDummy::ImtqDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie,
+                     power::Switch_t pwrSwitcher, bool enableHkSets)
+    : DeviceHandlerBase(objectId, comif, comCookie),
+      enableHkSets(enableHkSets),
+      statusSet(this),
+      dipoleSet(*this),
+      rawMtmNoTorque(this),
+      hkDatasetNoTorque(this),
+      rawMtmWithTorque(this),
+      hkDatasetWithTorque(this),
+      calMtmMeasurementSet(this),
+      switcher(pwrSwitcher) {}
 
 ImtqDummy::~ImtqDummy() = default;
 
-void ImtqDummy::doStartUp() { setMode(MODE_NORMAL); }
+void ImtqDummy::doStartUp() { setMode(MODE_ON); }
 
 void ImtqDummy::doShutDown() { setMode(_MODE_POWER_DOWN); }
 
+ReturnValue_t ImtqDummy::getSwitches(const uint8_t **switches, uint8_t *numberOfSwitches) {
+  if (switcher != power::NO_SWITCH) {
+    *numberOfSwitches = 1;
+    *switches = &switcher;
+    return returnvalue::OK;
+  }
+  return DeviceHandlerBase::NO_SWITCH;
+}
+
 ReturnValue_t ImtqDummy::buildNormalDeviceCommand(DeviceCommandId_t *id) { return NOTHING_TO_SEND; }
 
 ReturnValue_t ImtqDummy::buildTransitionDeviceCommand(DeviceCommandId_t *id) {
@@ -45,5 +64,57 @@ ReturnValue_t ImtqDummy::initializeLocalDataPool(localpool::DataPool &localDataP
   localDataPoolMap.emplace(imtq::ACTUATION_RAW_STATUS, new PoolEntry<uint8_t>({0}));
   localDataPoolMap.emplace(imtq::DIPOLES_ID, new PoolEntry<int16_t>({0, 0, 0}));
   localDataPoolMap.emplace(imtq::CURRENT_TORQUE_DURATION, new PoolEntry<uint16_t>({0}));
+
+  // ENG HK No Torque
+  localDataPoolMap.emplace(imtq::DIGITAL_VOLTAGE_MV, new PoolEntry<uint16_t>({0}));
+  localDataPoolMap.emplace(imtq::ANALOG_VOLTAGE_MV, new PoolEntry<uint16_t>({0}));
+  localDataPoolMap.emplace(imtq::DIGITAL_CURRENT, new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(imtq::ANALOG_CURRENT, new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(imtq::COIL_CURRENTS, &coilCurrentsMilliampsNoTorque);
+  localDataPoolMap.emplace(imtq::COIL_TEMPERATURES, &coilTempsNoTorque);
+  localDataPoolMap.emplace(imtq::MCU_TEMPERATURE, new PoolEntry<int16_t>({0}));
+
+  // ENG HK With Torque
+  localDataPoolMap.emplace(imtq::DIGITAL_VOLTAGE_MV_WT, new PoolEntry<uint16_t>({0}));
+  localDataPoolMap.emplace(imtq::ANALOG_VOLTAGE_MV_WT, new PoolEntry<uint16_t>({0}));
+  localDataPoolMap.emplace(imtq::DIGITAL_CURRENT_WT, new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(imtq::ANALOG_CURRENT_WT, new PoolEntry<float>({0}));
+  localDataPoolMap.emplace(imtq::COIL_CURRENTS_WT, &coilCurrentsMilliampsWithTorque);
+  localDataPoolMap.emplace(imtq::COIL_TEMPERATURES_WT, &coilTempsWithTorque);
+  localDataPoolMap.emplace(imtq::MCU_TEMPERATURE_WT, new PoolEntry<int16_t>({0}));
+
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(hkDatasetNoTorque.getSid(), enableHkSets, 30.0));
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(hkDatasetWithTorque.getSid(), enableHkSets, 30.0));
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(rawMtmNoTorque.getSid(), false, 10.0));
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(rawMtmWithTorque.getSid(), false, 10.0));
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(calMtmMeasurementSet.getSid(), false, 10.0));
+  poolManager.subscribeForRegularPeriodicPacket(
+      subdp::RegularHkPeriodicParams(statusSet.getSid(), false, 10.0));
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(dipoleSet.getSid(), false, 10.0));
   return DeviceHandlerBase::initializeLocalDataPool(localDataPoolMap, poolManager);
 }
+
+LocalPoolDataSetBase *ImtqDummy::getDataSetHandle(sid_t sid) {
+  if (sid == hkDatasetNoTorque.getSid()) {
+    return &hkDatasetNoTorque;
+  } else if (sid == dipoleSet.getSid()) {
+    return &dipoleSet;
+  } else if (sid == statusSet.getSid()) {
+    return &statusSet;
+  } else if (sid == hkDatasetWithTorque.getSid()) {
+    return &hkDatasetWithTorque;
+  } else if (sid == rawMtmWithTorque.getSid()) {
+    return &rawMtmWithTorque;
+  } else if (sid == calMtmMeasurementSet.getSid()) {
+    return &calMtmMeasurementSet;
+  } else if (sid == rawMtmNoTorque.getSid()) {
+    return &rawMtmNoTorque;
+  }
+  return nullptr;
+}

dummies/ImtqDummy.h

@@ -3,6 +3,8 @@
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
 
+#include "mission/acs/imtqHelpers.h"
+
 class ImtqDummy : public DeviceHandlerBase {
  public:
   static const DeviceCommandId_t SIMPLE_COMMAND = 1;
@@ -11,10 +13,44 @@ class ImtqDummy : public DeviceHandlerBase {
   static const uint8_t SIMPLE_COMMAND_DATA = 1;
   static const uint8_t PERIODIC_REPLY_DATA = 2;
 
-  ImtqDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie);
+  ImtqDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie,
+            power::Switch_t pwrSwitcher, bool enableHkSets);
   ~ImtqDummy() override;
 
  protected:
+  bool enableHkSets;
+
+  imtq::StatusDataset statusSet;
+  imtq::DipoleActuationSet dipoleSet;
+  imtq::RawMtmMeasurementNoTorque rawMtmNoTorque;
+  imtq::HkDatasetNoTorque hkDatasetNoTorque;
+
+  imtq::RawMtmMeasurementWithTorque rawMtmWithTorque;
+  imtq::HkDatasetWithTorque hkDatasetWithTorque;
+
+  imtq::CalibratedMtmMeasurementSet calMtmMeasurementSet;
+
+  PoolEntry<uint8_t> statusMode = PoolEntry<uint8_t>({0});
+  PoolEntry<uint8_t> statusError = PoolEntry<uint8_t>({0});
+  PoolEntry<uint8_t> statusConfig = PoolEntry<uint8_t>({0});
+  PoolEntry<uint32_t> statusUptime = PoolEntry<uint32_t>({0});
+
+  PoolEntry<int32_t> mgmCalEntry = PoolEntry<int32_t>(3);
+  PoolEntry<int16_t> dipolesPoolEntry = PoolEntry<int16_t>({0, 0, 0}, false);
+  PoolEntry<uint16_t> torqueDurationEntry = PoolEntry<uint16_t>({0}, false);
+  PoolEntry<float> coilCurrentsMilliampsNoTorque = PoolEntry<float>(3);
+  PoolEntry<float> coilCurrentsMilliampsWithTorque = PoolEntry<float>(3);
+  PoolEntry<int16_t> coilTempsNoTorque = PoolEntry<int16_t>(3);
+  PoolEntry<int16_t> coilTempsWithTorque = PoolEntry<int16_t>(3);
+  PoolEntry<float> mtmRawNoTorque = PoolEntry<float>(3);
+  PoolEntry<uint8_t> actStatusNoTorque = PoolEntry<uint8_t>(1);
+  PoolEntry<float> mtmRawWithTorque = PoolEntry<float>(3);
+  PoolEntry<uint8_t> actStatusWithTorque = PoolEntry<uint8_t>(1);
+
+  power::Switch_t switcher = power::NO_SWITCH;
+
+  ReturnValue_t getSwitches(const uint8_t **switches, uint8_t *numberOfSwitches) override;
+
   void doStartUp() override;
   void doShutDown() override;
   ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t *id) override;
@@ -28,6 +64,7 @@ class ImtqDummy : public DeviceHandlerBase {
   uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override;
   ReturnValue_t initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                         LocalDataPoolManager &poolManager) override;
+  LocalPoolDataSetBase *getDataSetHandle(sid_t sid) override;
 };
 
 #endif /* DUMMIES_IMTQDUMMY_H_ */

dummies/RwDummy.cpp

@@ -3,13 +3,24 @@
 #include <mission/acs/rwHelpers.h>
 
 RwDummy::RwDummy(object_id_t objectId, object_id_t comif, CookieIF *comCookie)
-    : DeviceHandlerBase(objectId, comif, comCookie) {}
+    : DeviceHandlerBase(objectId, comif, comCookie),
+
+      statusSet(this),
+      lastResetStatusSet(this),
+      tmDataset(this),
+      rwSpeedActuationSet(*this) {}
 
 RwDummy::~RwDummy() {}
 
-void RwDummy::doStartUp() { setMode(MODE_ON); }
+void RwDummy::doStartUp() {
+  statusSet.setReportingEnabled(true);
+  setMode(MODE_ON);
+}
 
-void RwDummy::doShutDown() { setMode(MODE_OFF); }
+void RwDummy::doShutDown() {
+  statusSet.setReportingEnabled(false);
+  setMode(MODE_OFF);
+}
 
 ReturnValue_t RwDummy::buildNormalDeviceCommand(DeviceCommandId_t *id) { return NOTHING_TO_SEND; }
 
@@ -37,6 +48,9 @@ uint32_t RwDummy::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return
 
 ReturnValue_t RwDummy::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
                                                LocalDataPoolManager &poolManager) {
+  localDataPoolMap.emplace(rws::RW_SPEED, &rwSpeed);
+  localDataPoolMap.emplace(rws::RAMP_TIME, &rampTime);
+
   localDataPoolMap.emplace(rws::TEMPERATURE_C, new PoolEntry<int32_t>({0}));
 
   localDataPoolMap.emplace(rws::CURR_SPEED, new PoolEntry<int32_t>({0}));
@@ -71,5 +85,11 @@ ReturnValue_t RwDummy::initializeLocalDataPool(localpool::DataPool &localDataPoo
   localDataPoolMap.emplace(rws::SPI_BYTES_READ, new PoolEntry<uint32_t>({0}));
   localDataPoolMap.emplace(rws::SPI_REG_OVERRUN_ERRORS, new PoolEntry<uint32_t>({0}));
   localDataPoolMap.emplace(rws::SPI_TOTAL_ERRORS, new PoolEntry<uint32_t>({0}));
+  poolManager.subscribeForDiagPeriodicPacket(
+      subdp::DiagnosticsHkPeriodicParams(statusSet.getSid(), false, 12.0));
+  poolManager.subscribeForRegularPeriodicPacket(
+      subdp::RegularHkPeriodicParams(tmDataset.getSid(), false, 30.0));
+  poolManager.subscribeForRegularPeriodicPacket(
+      subdp::RegularHkPeriodicParams(lastResetStatusSet.getSid(), false, 30.0));
   return returnvalue::OK;
 }

dummies/RwDummy.h

@@ -2,6 +2,7 @@
 #define DUMMIES_RWDUMMY_H_
 
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
+#include <mission/acs/rwHelpers.h>
 
 class RwDummy : public DeviceHandlerBase {
  public:
@@ -15,6 +16,14 @@ class RwDummy : public DeviceHandlerBase {
   virtual ~RwDummy();
 
  protected:
+  rws::StatusSet statusSet;
+  rws::LastResetSatus lastResetStatusSet;
+  rws::TmDataset tmDataset;
+  rws::RwSpeedActuationSet rwSpeedActuationSet;
+
+  PoolEntry<int32_t> rwSpeed = PoolEntry<int32_t>({0});
+  PoolEntry<uint16_t> rampTime = PoolEntry<uint16_t>({10});
+
   void doStartUp() override;
   void doShutDown() override;
   ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t *id) override;

dummies/TemperatureSensorInserter.cpp

@@ -96,6 +96,35 @@ ReturnValue_t TemperatureSensorInserter::performOperation(uint8_t opCode) {
       }
       break;
     }
+    case (TestCase::COLD_PLOC_CONSECUTIVE): {
+      if (cycles == 15) {
+        sif::debug << "Setting cold PLOC temperature" << std::endl;
+        max31865DummyMap[objects::RTD_0_IC3_PLOC_HEATSPREADER]->setTemperature(-15, true);
+      }
+      if (cycles == 30) {
+        sif::debug << "Setting warmer PLOC temperature" << std::endl;
+        max31865DummyMap[objects::RTD_0_IC3_PLOC_HEATSPREADER]->setTemperature(0, true);
+      }
+      if (cycles == 45) {
+        sif::debug << "Setting cold PLOC temperature again" << std::endl;
+        max31865DummyMap[objects::RTD_0_IC3_PLOC_HEATSPREADER]->setTemperature(-15, true);
+      }
+      if (cycles == 60) {
+        sif::debug << "Setting warmer PLOC temperature again" << std::endl;
+        max31865DummyMap[objects::RTD_0_IC3_PLOC_HEATSPREADER]->setTemperature(0, true);
+      }
+      break;
+    }
+    case (TestCase::COLD_CAMERA): {
+      if (cycles == 15) {
+        sif::debug << "Setting cold CAM temperature" << std::endl;
+        max31865DummyMap[objects::RTD_2_IC5_4K_CAMERA]->setTemperature(-40, true);
+      }
+      if (cycles == 30) {
+        sif::debug << "Setting CAM temperature back to normal" << std::endl;
+        max31865DummyMap[objects::RTD_2_IC5_4K_CAMERA]->setTemperature(0, true);
+      }
+    }
   }
   cycles++;
   return returnvalue::OK;

dummies/TemperatureSensorInserter.h

@@ -31,6 +31,8 @@ class TemperatureSensorInserter : public ExecutableObjectIF, public SystemObject
     COLD_MGT = 3,
     COLD_STR = 4,
     COLD_STR_CONSECUTIVE = 5,
+    COLD_CAMERA = 6,
+    COLD_PLOC_CONSECUTIVE = 7,
   };
   int iteration = 0;
   uint32_t cycles = 0;

dummies/helperFactory.cpp

@@ -42,10 +42,13 @@
 #include "mission/system/tree/payloadModeTree.h"
 #include "mission/tcs/defs.h"
 
-void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpioIF) {
+void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpioIF,
+                          bool enableHkSets) {
   new ComIFDummy(objects::DUMMY_COM_IF);
   auto* comCookieDummy = new ComCookieDummy();
-  new BpxDummy(objects::BPX_BATT_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
+  if (cfg.addBpxBattDummy) {
+    new BpxDummy(objects::BPX_BATT_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
+  }
   if (cfg.addCoreCtrlCfg) {
     new CoreControllerDummy(objects::CORE_CONTROLLER);
   }
@@ -72,11 +75,15 @@ void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpio
   }
   auto* imtqAssy = new ImtqAssembly(objects::IMTQ_ASSY);
   imtqAssy->connectModeTreeParent(satsystem::acs::ACS_SUBSYSTEM);
-  auto* imtqDummy = new ImtqDummy(objects::IMTQ_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
+  auto* imtqDummy = new ImtqDummy(objects::IMTQ_HANDLER, objects::DUMMY_COM_IF, comCookieDummy,
+                                  power::Switches::PDU1_CH3_MGT_5V, enableHkSets);
   imtqDummy->enableThermalModule(ThermalStateCfg());
+  imtqDummy->setPowerSwitcher(&pwrSwitcher);
   imtqDummy->connectModeTreeParent(*imtqAssy);
-  if (cfg.addPowerDummies) {
-    new AcuDummy(objects::ACU_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
+  if (cfg.addOnlyAcuDummy) {
+    new AcuDummy(objects::ACU_HANDLER, objects::DUMMY_COM_IF, comCookieDummy, enableHkSets);
+  } else if (cfg.addPowerDummies) {
+    new AcuDummy(objects::ACU_HANDLER, objects::DUMMY_COM_IF, comCookieDummy, enableHkSets);
     new PduDummy(objects::PDU1_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
     new PduDummy(objects::PDU2_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
     new P60DockDummy(objects::P60DOCK_HANDLER, objects::DUMMY_COM_IF, comCookieDummy);
@@ -195,10 +202,10 @@ void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpio
         objects::TMP1075_HANDLER_PLPCDU_0,
         new Tmp1075Dummy(objects::TMP1075_HANDLER_PLPCDU_0, objects::DUMMY_COM_IF, comCookieDummy));
     // damaged.
-    //    tmpSensorDummies.emplace(
-    //        objects::TMP1075_HANDLER_PLPCDU_1,
-    //        new Tmp1075Dummy(objects::TMP1075_HANDLER_PLPCDU_1, objects::DUMMY_COM_IF,
-    //        comCookieDummy));
+    //        tmpSensorDummies.emplace(
+    //            objects::TMP1075_HANDLER_PLPCDU_1,
+    //            new Tmp1075Dummy(objects::TMP1075_HANDLER_PLPCDU_1, objects::DUMMY_COM_IF,
+    //            comCookieDummy));
     tmpSensorDummies.emplace(
         objects::TMP1075_HANDLER_IF_BOARD,
         new Tmp1075Dummy(objects::TMP1075_HANDLER_IF_BOARD, objects::DUMMY_COM_IF, comCookieDummy));
@@ -214,9 +221,11 @@ void dummy::createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitcher, GpioIF* gpio
       tmp.second->connectModeTreeParent(satsystem::tcs::SUBSYSTEM);
     }
   }
-  auto* camSwitcher =
-      new CamSwitcher(objects::CAM_SWITCHER, pwrSwitcher, power::Switches::PDU2_CH8_PAYLOAD_CAMERA);
-  camSwitcher->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
+  if (cfg.addCamSwitcherDummy) {
+    auto* camSwitcher = new CamSwitcher(objects::CAM_SWITCHER, pwrSwitcher,
+                                        power::Switches::PDU2_CH8_PAYLOAD_CAMERA);
+    camSwitcher->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
+  }
   auto* scexDummy = new ScexDummy(objects::SCEX, objects::DUMMY_COM_IF, comCookieDummy);
   scexDummy->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
   auto* plPcduDummy =

dummies/helperFactory.h

@@ -6,17 +6,22 @@ class GpioIF;
 
 namespace dummy {
 
+// Default values targeted towards EM.
 struct DummyCfg {
   bool addCoreCtrlCfg = true;
+  // Special variant because the ACU broke. Overrides addPowerDummies, only ACU dummy will be added.
+  bool addOnlyAcuDummy = false;
   bool addPowerDummies = true;
+  bool addBpxBattDummy = true;
   bool addSyrlinksDummies = true;
   bool addAcsBoardDummies = true;
   bool addSusDummies = true;
   bool addTempSensorDummies = true;
   bool addRtdComIFDummy = true;
   bool addPlocDummies = true;
+  bool addCamSwitcherDummy = false;
 };
 
-void createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitch, GpioIF* gpioIF);
+void createDummies(DummyCfg cfg, PowerSwitchIF& pwrSwitch, GpioIF* gpioIF, bool enableHkSets);
 
 }  // namespace dummy

generators/bsp_hosted_events.csv

@@ -177,20 +177,24 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 12515;0x30e3;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/acs/StrComHandler.h
 12516;0x30e4;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/acs/StrComHandler.h
 12517;0x30e5;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/acs/StrComHandler.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/payload/PlocMpsocHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/payload/PlocMpsocHelper.h
-12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocMpsocHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHelper.h
-12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/payload/PlocMpsocHelper.h
-12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/payload/PlocMpsocHelper.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/payload/PlocMpsocSpecialComHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;INFO;Flash write successful;linux/payload/PlocMpsocSpecialComHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocSpecialComHelper.h
+12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12614;0x3146;MPSOC_FLASH_READ_PACKET_ERROR;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12615;0x3147;MPSOC_FLASH_READ_FAILED;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12616;0x3148;MPSOC_FLASH_READ_SUCCESSFUL;INFO;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12617;0x3149;MPSOC_READ_TIMEOUT;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
 12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/payload/PayloadPcduHandler.h
 12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
 12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
@@ -267,6 +271,7 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 14010;0x36ba;TRYING_I2C_RECOVERY;HIGH;I2C is unavailable. Trying recovery of I2C bus by power cycling all I2C devices.;mission/sysDefs.h
 14011;0x36bb;I2C_REBOOT;HIGH;I2C is unavailable. Recovery did not work, performing full reboot.;mission/sysDefs.h
 14012;0x36bc;PDEC_REBOOT;HIGH;PDEC recovery through reset was not possible, performing full reboot.;mission/sysDefs.h
+14013;0x36bd;FIRMWARE_INFO;INFO;Version information of the firmware (not OBSW). P1: Byte 0: Major, Byte 1: Minor, Byte 2: Patch, Byte 3: Has Git Hash P2: First four letters of Git SHA is the last byte of P1 is set.;mission/sysDefs.h
 14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/tcsDefs.h
 14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/tcsDefs.h
 14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
@@ -274,6 +279,7 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 14105;0x3719;CAMERA_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
 14106;0x371a;PCDU_SYSTEM_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
 14107;0x371b;HEATER_NOT_OFF_FOR_OFF_MODE;MEDIUM;No description;mission/controller/tcsDefs.h
+14108;0x371c;MGT_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
 14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/com/ComSubsystem.h
 14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/com/ComSubsystem.h
 14300;0x37dc;POSSIBLE_FILE_CORRUPTION;LOW;P1: Result code of TM packet parser. P2: Timestamp of possibly corrupt file as a unix timestamp.;mission/persistentTmStoreDefs.h

generators/bsp_q7s_events.csv

@@ -177,20 +177,24 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 12515;0x30e3;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/acs/StrComHandler.h
 12516;0x30e4;STR_HELPER_SENDING_PACKET_FAILED;LOW;No description;linux/acs/StrComHandler.h
 12517;0x30e5;STR_HELPER_REQUESTING_MSG_FAILED;LOW;No description;linux/acs/StrComHandler.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/payload/PlocMpsocHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/payload/PlocMpsocHelper.h
-12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocMpsocHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocHelper.h
-12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocHelper.h
-12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/payload/PlocMpsocHelper.h
-12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/payload/PlocMpsocHelper.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/payload/PlocMpsocSpecialComHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;INFO;Flash write successful;linux/payload/PlocMpsocSpecialComHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/payload/PlocMpsocSpecialComHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/payload/PlocMpsocSpecialComHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/payload/PlocMpsocSpecialComHelper.h
+12612;0x3144;MPSOC_TM_SIZE_ERROR;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12613;0x3145;MPSOC_TM_CRC_MISSMATCH;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12614;0x3146;MPSOC_FLASH_READ_PACKET_ERROR;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12615;0x3147;MPSOC_FLASH_READ_FAILED;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12616;0x3148;MPSOC_FLASH_READ_SUCCESSFUL;INFO;No description;linux/payload/PlocMpsocSpecialComHelper.h
+12617;0x3149;MPSOC_READ_TIMEOUT;LOW;No description;linux/payload/PlocMpsocSpecialComHelper.h
 12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/payload/PayloadPcduHandler.h
 12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
 12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/payload/PayloadPcduHandler.h
@@ -267,6 +271,7 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 14010;0x36ba;TRYING_I2C_RECOVERY;HIGH;I2C is unavailable. Trying recovery of I2C bus by power cycling all I2C devices.;mission/sysDefs.h
 14011;0x36bb;I2C_REBOOT;HIGH;I2C is unavailable. Recovery did not work, performing full reboot.;mission/sysDefs.h
 14012;0x36bc;PDEC_REBOOT;HIGH;PDEC recovery through reset was not possible, performing full reboot.;mission/sysDefs.h
+14013;0x36bd;FIRMWARE_INFO;INFO;Version information of the firmware (not OBSW). P1: Byte 0: Major, Byte 1: Minor, Byte 2: Patch, Byte 3: Has Git Hash P2: First four letters of Git SHA is the last byte of P1 is set.;mission/sysDefs.h
 14100;0x3714;NO_VALID_SENSOR_TEMPERATURE;MEDIUM;No description;mission/controller/tcsDefs.h
 14101;0x3715;NO_HEALTHY_HEATER_AVAILABLE;MEDIUM;No description;mission/controller/tcsDefs.h
 14102;0x3716;SYRLINKS_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
@@ -274,6 +279,7 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 14105;0x3719;CAMERA_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
 14106;0x371a;PCDU_SYSTEM_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
 14107;0x371b;HEATER_NOT_OFF_FOR_OFF_MODE;MEDIUM;No description;mission/controller/tcsDefs.h
+14108;0x371c;MGT_OVERHEATING;HIGH;No description;mission/controller/tcsDefs.h
 14201;0x3779;TX_TIMER_EXPIRED;INFO;The transmit timer to protect the Syrlinks expired P1: The current timer value;mission/system/com/ComSubsystem.h
 14202;0x377a;BIT_LOCK_TX_ON;INFO;Transmitter will be turned on due to detection of bitlock;mission/system/com/ComSubsystem.h
 14300;0x37dc;POSSIBLE_FILE_CORRUPTION;LOW;P1: Result code of TM packet parser. P2: Timestamp of possibly corrupt file as a unix timestamp.;mission/persistentTmStoreDefs.h

generators/bsp_q7s_returnvalues.csv

@@ -478,8 +478,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x53b6;STRH_StartrackerAlreadyBooted;Star tracker is already in firmware mode;182;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
 0x53b7;STRH_StartrackerNotRunningFirmware;Star tracker must be in firmware mode to run this command;183;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
 0x53b8;STRH_StartrackerNotRunningBootloader;Star tracker must be in bootloader mode to run this command;184;STR_HANDLER;mission/acs/str/StarTrackerHandler.h
-0x54e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);224;DWLPWRON_CMD;linux/payload/plocMpscoDefs.h
-0x54e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);225;DWLPWRON_CMD;linux/payload/plocMpscoDefs.h
+0x54e0;DWLPWRON_InvalidMode;Received command has invalid JESD mode (valid modes are 0 - 5);224;DWLPWRON_CMD;linux/payload/plocMpsocHelpers.h
+0x54e1;DWLPWRON_InvalidLaneRate;Received command has invalid lane rate (valid lane rate are 0 - 9);225;DWLPWRON_CMD;linux/payload/plocMpsocHelpers.h
 0x5700;PLSPVhLP_RequestDone;No description;0;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
 0x5701;PLSPVhLP_NoPacketFound;No description;1;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
 0x5702;PLSPVhLP_DecodeBufTooSmall;No description;2;PLOC_SUPV_HELPER;linux/payload/PlocSupvUartMan.h
@@ -543,7 +543,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x63a0;NVMB_KeyNotExists;Specified key does not exist in json file;160;NVM_PARAM_BASE;mission/memory/NvmParameterBase.h
 0x64a0;FSHLP_SdNotMounted;SD card specified with path string not mounted;160;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
 0x64a1;FSHLP_FileNotExists;Specified file does not exist on filesystem;161;FILE_SYSTEM_HELPER;bsp_q7s/fs/FilesystemHelper.h
-0x65a0;PLMPHLP_FileClosedAccidentally;File accidentally close;160;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocHelper.h
+0x65a0;PLMPHLP_FileWriteError;File error occured for file transfers from OBC to the MPSoC.;160;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocSpecialComHelper.h
+0x65a1;PLMPHLP_FileReadError;File error occured for file transfers from MPSoC to OBC.;161;PLOC_MPSOC_HELPER;linux/payload/PlocMpsocSpecialComHelper.h
 0x66a0;SADPL_CommandNotSupported;No description;160;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
 0x66a1;SADPL_DeploymentAlreadyExecuting;No description;161;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h
 0x66a2;SADPL_MainSwitchTimeoutFailure;No description;162;SA_DEPL_HANDLER;mission/SolarArrayDeploymentHandler.h

generators/events/translateEvents.cpp

@@ -1,7 +1,7 @@
 /**
- * @brief    Auto-generated event translation file. Contains 290 translations.
+ * @brief    Auto-generated event translation file. Contains 296 translations.
  * @details
- * Generated on: 2023-04-14 20:23:17
+ * Generated on: 2023-06-21 19:01:02
  */
 #include "translateEvents.h"
 
@@ -197,6 +197,10 @@ const char *MPSOC_EXE_INVALID_APID_STRING = "MPSOC_EXE_INVALID_APID";
 const char *MPSOC_HELPER_SEQ_CNT_MISMATCH_STRING = "MPSOC_HELPER_SEQ_CNT_MISMATCH";
 const char *MPSOC_TM_SIZE_ERROR_STRING = "MPSOC_TM_SIZE_ERROR";
 const char *MPSOC_TM_CRC_MISSMATCH_STRING = "MPSOC_TM_CRC_MISSMATCH";
+const char *MPSOC_FLASH_READ_PACKET_ERROR_STRING = "MPSOC_FLASH_READ_PACKET_ERROR";
+const char *MPSOC_FLASH_READ_FAILED_STRING = "MPSOC_FLASH_READ_FAILED";
+const char *MPSOC_FLASH_READ_SUCCESSFUL_STRING = "MPSOC_FLASH_READ_SUCCESSFUL";
+const char *MPSOC_READ_TIMEOUT_STRING = "MPSOC_READ_TIMEOUT";
 const char *TRANSITION_BACK_TO_OFF_STRING = "TRANSITION_BACK_TO_OFF";
 const char *NEG_V_OUT_OF_BOUNDS_STRING = "NEG_V_OUT_OF_BOUNDS";
 const char *U_DRO_OUT_OF_BOUNDS_STRING = "U_DRO_OUT_OF_BOUNDS";
@@ -273,6 +277,7 @@ const char *INDIVIDUAL_BOOT_COUNTS_STRING = "INDIVIDUAL_BOOT_COUNTS";
 const char *TRYING_I2C_RECOVERY_STRING = "TRYING_I2C_RECOVERY";
 const char *I2C_REBOOT_STRING = "I2C_REBOOT";
 const char *PDEC_REBOOT_STRING = "PDEC_REBOOT";
+const char *FIRMWARE_INFO_STRING = "FIRMWARE_INFO";
 const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
 const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
 const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
@@ -280,6 +285,7 @@ const char *OBC_OVERHEATING_STRING = "OBC_OVERHEATING";
 const char *CAMERA_OVERHEATING_STRING = "CAMERA_OVERHEATING";
 const char *PCDU_SYSTEM_OVERHEATING_STRING = "PCDU_SYSTEM_OVERHEATING";
 const char *HEATER_NOT_OFF_FOR_OFF_MODE_STRING = "HEATER_NOT_OFF_FOR_OFF_MODE";
+const char *MGT_OVERHEATING_STRING = "MGT_OVERHEATING";
 const char *TX_TIMER_EXPIRED_STRING = "TX_TIMER_EXPIRED";
 const char *BIT_LOCK_TX_ON_STRING = "BIT_LOCK_TX_ON";
 const char *POSSIBLE_FILE_CORRUPTION_STRING = "POSSIBLE_FILE_CORRUPTION";
@@ -682,6 +688,14 @@ const char *translateEvents(Event event) {
       return MPSOC_TM_SIZE_ERROR_STRING;
     case (12613):
       return MPSOC_TM_CRC_MISSMATCH_STRING;
+    case (12614):
+      return MPSOC_FLASH_READ_PACKET_ERROR_STRING;
+    case (12615):
+      return MPSOC_FLASH_READ_FAILED_STRING;
+    case (12616):
+      return MPSOC_FLASH_READ_SUCCESSFUL_STRING;
+    case (12617):
+      return MPSOC_READ_TIMEOUT_STRING;
     case (12700):
       return TRANSITION_BACK_TO_OFF_STRING;
     case (12701):
@@ -834,6 +848,8 @@ const char *translateEvents(Event event) {
       return I2C_REBOOT_STRING;
     case (14012):
       return PDEC_REBOOT_STRING;
+    case (14013):
+      return FIRMWARE_INFO_STRING;
     case (14100):
       return NO_VALID_SENSOR_TEMPERATURE_STRING;
     case (14101):
@@ -848,6 +864,8 @@ const char *translateEvents(Event event) {
       return PCDU_SYSTEM_OVERHEATING_STRING;
     case (14107):
       return HEATER_NOT_OFF_FOR_OFF_MODE_STRING;
+    case (14108):
+      return MGT_OVERHEATING_STRING;
     case (14201):
       return TX_TIMER_EXPIRED_STRING;
     case (14202):

generators/objects/translateObjects.cpp

@@ -2,7 +2,7 @@
  * @brief  Auto-generated object translation file.
  * @details
  * Contains 175 translations.
- * Generated on: 2023-04-14 20:23:17
+ * Generated on: 2023-06-21 19:01:02
  */
 #include "translateObjects.h"
 

linux/acs/AcsBoardPolling.cpp

@@ -113,6 +113,7 @@ ReturnValue_t AcsBoardPolling::sendMessage(CookieIF* cookie, const uint8_t* send
     if (req->mode != adis.mode) {
       if (req->mode == acs::SimpleSensorMode::NORMAL) {
         adis.type = req->type;
+        adis.decRate = req->cfg.decRateReg;
         // The initial countdown is handled by the device handler now.
         // adis.countdown.setTimeout(adis1650x::START_UP_TIME);
         if (adis.type == adis1650x::Type::ADIS16507) {
@@ -376,6 +377,80 @@ void AcsBoardPolling::gyroL3gHandler(GyroL3g& l3g) {
   }
 }
 
+ReturnValue_t AcsBoardPolling::writeAdisReg(SpiCookie& cookie) {
+  ReturnValue_t result = returnvalue::OK;
+  int retval = 0;
+  // Prepare transfer
+  int fileDescriptor = 0;
+  std::string device = spiComIF.getSpiDev();
+  UnixFileGuard fileHelper(device, fileDescriptor, O_RDWR, "SpiComIF::sendMessage");
+  if (fileHelper.getOpenResult() != returnvalue::OK) {
+    return spi::OPENING_FILE_FAILED;
+  }
+  spi::SpiModes spiMode = spi::SpiModes::MODE_0;
+  uint32_t spiSpeed = 0;
+  cookie.getSpiParameters(spiMode, spiSpeed, nullptr);
+  spiComIF.setSpiSpeedAndMode(fileDescriptor, spiMode, spiSpeed);
+  cookie.assignWriteBuffer(cmdBuf.data());
+  cookie.setTransferSize(2);
+
+  gpioId_t gpioId = cookie.getChipSelectPin();
+  MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING;
+  uint32_t timeoutMs = 0;
+  MutexIF* mutex = spiComIF.getCsMutex();
+  cookie.getMutexParams(timeoutType, timeoutMs);
+  if (mutex == nullptr) {
+    sif::warning << "GyroADIS16507Handler::spiSendCallback: "
+                    "Mutex or GPIO interface invalid"
+                 << std::endl;
+    return returnvalue::FAILED;
+  }
+
+  size_t idx = 0;
+  spi_ioc_transfer* transferStruct = cookie.getTransferStructHandle();
+  uint64_t origTx = transferStruct->tx_buf;
+  uint64_t origRx = transferStruct->rx_buf;
+  for (idx = 0; idx < 4; idx += 2) {
+    result = mutex->lockMutex(timeoutType, timeoutMs);
+    if (result != returnvalue::OK) {
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+      sif::error << "AcsBoardPolling: Failed to lock mutex" << std::endl;
+#endif
+      return result;
+    }
+    // Pull SPI CS low. For now, no support for active high given
+    if (gpioId != gpio::NO_GPIO) {
+      gpioIF.pullLow(gpioId);
+    }
+
+    // Execute transfer
+    // Initiate a full duplex SPI transfer.
+    retval = ioctl(fileDescriptor, SPI_IOC_MESSAGE(1), cookie.getTransferStructHandle());
+    if (retval < 0) {
+      utility::handleIoctlError("SpiComIF::sendMessage: ioctl error.");
+      result = spi::FULL_DUPLEX_TRANSFER_FAILED;
+    }
+#if FSFW_HAL_SPI_WIRETAPPING == 1
+    comIf->performSpiWiretapping(cookie);
+#endif /* FSFW_LINUX_SPI_WIRETAPPING == 1 */
+
+    if (gpioId != gpio::NO_GPIO) {
+      gpioIF.pullHigh(gpioId);
+    }
+    mutex->unlockMutex();
+
+    transferStruct->tx_buf += 2;
+    transferStruct->rx_buf += 2;
+    if (idx < 4) {
+      usleep(adis1650x::STALL_TIME_MICROSECONDS);
+    }
+  }
+  transferStruct->tx_buf = origTx;
+  transferStruct->rx_buf = origRx;
+  cookie.setTransferSize(0);
+  return returnvalue::OK;
+}
+
 ReturnValue_t AcsBoardPolling::readAdisCfg(SpiCookie& cookie, size_t transferLen) {
   ReturnValue_t result = returnvalue::OK;
   int retval = 0;
@@ -455,15 +530,20 @@ void AcsBoardPolling::gyroAdisHandler(GyroAdis& gyro) {
   ReturnValue_t result;
   acs::SimpleSensorMode mode = acs::SimpleSensorMode::OFF;
   bool mustPerformStartup = false;
+  uint16_t decRate = 0;
   {
     MutexGuard mg(ipcLock, LOCK_TYPE, LOCK_TIMEOUT, LOCK_CTX);
     mode = gyro.mode;
+    decRate = gyro.decRate;
     mustPerformStartup = gyro.performStartup;
   }
   if (mode == acs::SimpleSensorMode::OFF) {
     return;
   }
   if (mustPerformStartup) {
+    adis1650x::prepareWriteRegCommand(adis1650x::DEC_RATE_REG, decRate, cmdBuf.data(),
+                                      cmdBuf.size());
+    writeAdisReg(*gyro.cookie);
     uint8_t regList[6];
     // Read configuration
     regList[0] = adis1650x::DIAG_STAT_REG;
@@ -491,13 +571,19 @@ void AcsBoardPolling::gyroAdisHandler(GyroAdis& gyro) {
       gyro.replyResult = returnvalue::FAILED;
       return;
     }
+    uint16_t decRateReadBack = (rawReply[10] << 8) | rawReply[11];
+    if (decRateReadBack != decRate) {
+      sif::warning << "AcsPollingTask: DEC rate configuration failed. Read " << decRateReadBack
+                   << ", expected " << decRate << std::endl;
+      gyro.replyResult = returnvalue::FAILED;
+    }
     MutexGuard mg(ipcLock, LOCK_TYPE, LOCK_TIMEOUT, LOCK_CTX);
     gyro.ownReply.cfgWasSet = true;
     gyro.ownReply.cfg.diagStat = (rawReply[2] << 8) | rawReply[3];
     gyro.ownReply.cfg.filterSetting = (rawReply[4] << 8) | rawReply[5];
     gyro.ownReply.cfg.rangMdl = (rawReply[6] << 8) | rawReply[7];
     gyro.ownReply.cfg.mscCtrlReg = (rawReply[8] << 8) | rawReply[9];
-    gyro.ownReply.cfg.decRateReg = (rawReply[10] << 8) | rawReply[11];
+    gyro.ownReply.cfg.decRateReg = decRateReadBack;
     gyro.ownReply.cfg.prodId = prodId;
     gyro.ownReply.data.sensitivity = adis1650x::rangMdlToSensitivity(gyro.ownReply.cfg.rangMdl);
     gyro.performStartup = false;

linux/acs/AcsBoardPolling.h

@@ -37,6 +37,7 @@ class AcsBoardPolling : public SystemObject,
 
   struct GyroAdis : public DevBase {
     adis1650x::Type type;
+    uint16_t decRate;
     Countdown countdown;
     acs::Adis1650XReply ownReply;
     acs::Adis1650XReply readerReply;
@@ -84,6 +85,8 @@ class AcsBoardPolling : public SystemObject,
   void gyroAdisHandler(GyroAdis& gyro);
   void mgmLis3Handler(MgmLis3& mgm);
   void mgmRm3100Handler(MgmRm3100& mgm);
+  // This fumction configures the register as specified on p.21 of the datasheet.
+  ReturnValue_t writeAdisReg(SpiCookie& cookie);
   // Special readout: 16us stall time between small 2 byte transfers.
   ReturnValue_t readAdisCfg(SpiCookie& spiCookie, size_t transferLen);
 };

linux/fsfwconfig/events/translateEvents.cpp

@@ -1,7 +1,7 @@
 /**
- * @brief    Auto-generated event translation file. Contains 290 translations.
+ * @brief    Auto-generated event translation file. Contains 296 translations.
  * @details
- * Generated on: 2023-04-14 20:23:17
+ * Generated on: 2023-06-21 19:01:02
  */
 #include "translateEvents.h"
 
@@ -197,6 +197,10 @@ const char *MPSOC_EXE_INVALID_APID_STRING = "MPSOC_EXE_INVALID_APID";
 const char *MPSOC_HELPER_SEQ_CNT_MISMATCH_STRING = "MPSOC_HELPER_SEQ_CNT_MISMATCH";
 const char *MPSOC_TM_SIZE_ERROR_STRING = "MPSOC_TM_SIZE_ERROR";
 const char *MPSOC_TM_CRC_MISSMATCH_STRING = "MPSOC_TM_CRC_MISSMATCH";
+const char *MPSOC_FLASH_READ_PACKET_ERROR_STRING = "MPSOC_FLASH_READ_PACKET_ERROR";
+const char *MPSOC_FLASH_READ_FAILED_STRING = "MPSOC_FLASH_READ_FAILED";
+const char *MPSOC_FLASH_READ_SUCCESSFUL_STRING = "MPSOC_FLASH_READ_SUCCESSFUL";
+const char *MPSOC_READ_TIMEOUT_STRING = "MPSOC_READ_TIMEOUT";
 const char *TRANSITION_BACK_TO_OFF_STRING = "TRANSITION_BACK_TO_OFF";
 const char *NEG_V_OUT_OF_BOUNDS_STRING = "NEG_V_OUT_OF_BOUNDS";
 const char *U_DRO_OUT_OF_BOUNDS_STRING = "U_DRO_OUT_OF_BOUNDS";
@@ -273,6 +277,7 @@ const char *INDIVIDUAL_BOOT_COUNTS_STRING = "INDIVIDUAL_BOOT_COUNTS";
 const char *TRYING_I2C_RECOVERY_STRING = "TRYING_I2C_RECOVERY";
 const char *I2C_REBOOT_STRING = "I2C_REBOOT";
 const char *PDEC_REBOOT_STRING = "PDEC_REBOOT";
+const char *FIRMWARE_INFO_STRING = "FIRMWARE_INFO";
 const char *NO_VALID_SENSOR_TEMPERATURE_STRING = "NO_VALID_SENSOR_TEMPERATURE";
 const char *NO_HEALTHY_HEATER_AVAILABLE_STRING = "NO_HEALTHY_HEATER_AVAILABLE";
 const char *SYRLINKS_OVERHEATING_STRING = "SYRLINKS_OVERHEATING";
@@ -280,6 +285,7 @@ const char *OBC_OVERHEATING_STRING = "OBC_OVERHEATING";
 const char *CAMERA_OVERHEATING_STRING = "CAMERA_OVERHEATING";
 const char *PCDU_SYSTEM_OVERHEATING_STRING = "PCDU_SYSTEM_OVERHEATING";
 const char *HEATER_NOT_OFF_FOR_OFF_MODE_STRING = "HEATER_NOT_OFF_FOR_OFF_MODE";
+const char *MGT_OVERHEATING_STRING = "MGT_OVERHEATING";
 const char *TX_TIMER_EXPIRED_STRING = "TX_TIMER_EXPIRED";
 const char *BIT_LOCK_TX_ON_STRING = "BIT_LOCK_TX_ON";
 const char *POSSIBLE_FILE_CORRUPTION_STRING = "POSSIBLE_FILE_CORRUPTION";
@@ -682,6 +688,14 @@ const char *translateEvents(Event event) {
       return MPSOC_TM_SIZE_ERROR_STRING;
     case (12613):
       return MPSOC_TM_CRC_MISSMATCH_STRING;
+    case (12614):
+      return MPSOC_FLASH_READ_PACKET_ERROR_STRING;
+    case (12615):
+      return MPSOC_FLASH_READ_FAILED_STRING;
+    case (12616):
+      return MPSOC_FLASH_READ_SUCCESSFUL_STRING;
+    case (12617):
+      return MPSOC_READ_TIMEOUT_STRING;
     case (12700):
       return TRANSITION_BACK_TO_OFF_STRING;
     case (12701):
@@ -834,6 +848,8 @@ const char *translateEvents(Event event) {
       return I2C_REBOOT_STRING;
     case (14012):
       return PDEC_REBOOT_STRING;
+    case (14013):
+      return FIRMWARE_INFO_STRING;
     case (14100):
       return NO_VALID_SENSOR_TEMPERATURE_STRING;
     case (14101):
@@ -848,6 +864,8 @@ const char *translateEvents(Event event) {
       return PCDU_SYSTEM_OVERHEATING_STRING;
     case (14107):
       return HEATER_NOT_OFF_FOR_OFF_MODE_STRING;
+    case (14108):
+      return MGT_OVERHEATING_STRING;
     case (14201):
       return TX_TIMER_EXPIRED_STRING;
     case (14202):

linux/fsfwconfig/objects/translateObjects.cpp

@@ -2,7 +2,7 @@
  * @brief  Auto-generated object translation file.
  * @details
  * Contains 175 translations.
- * Generated on: 2023-04-14 20:23:17
+ * Generated on: 2023-06-21 19:01:02
  */
 #include "translateObjects.h"
 

linux/ipcore/AxiPtmeConfig.cpp

@@ -16,9 +16,9 @@ AxiPtmeConfig::AxiPtmeConfig(object_id_t objectId, std::string axiUio, int mapNu
 AxiPtmeConfig::~AxiPtmeConfig() {}
 
 ReturnValue_t AxiPtmeConfig::initialize() {
-  ReturnValue_t result = returnvalue::OK;
   UioMapper uioMapper(axiUio, mapNum);
-  result = uioMapper.getMappedAdress(&baseAddress, UioMapper::Permissions::READ_WRITE);
+  ReturnValue_t result =
+      uioMapper.getMappedAdress(&baseAddress, UioMapper::Permissions::READ_WRITE);
   if (result != returnvalue::OK) {
     return result;
   }
@@ -26,8 +26,7 @@ ReturnValue_t AxiPtmeConfig::initialize() {
 }
 
 ReturnValue_t AxiPtmeConfig::writeCaduRateReg(uint8_t rateVal) {
-  ReturnValue_t result = returnvalue::OK;
-  result = mutex->lockMutex(timeoutType, mutexTimeout);
+  ReturnValue_t result = mutex->lockMutex(timeoutType, mutexTimeout);
   if (result != returnvalue::OK) {
     sif::warning << "AxiPtmeConfig::writeCaduRateReg: Failed to lock mutex" << std::endl;
     return returnvalue::FAILED;
@@ -41,6 +40,11 @@ ReturnValue_t AxiPtmeConfig::writeCaduRateReg(uint8_t rateVal) {
   return returnvalue::OK;
 }
 
+uint8_t AxiPtmeConfig::readCaduRateReg() {
+  MutexGuard mg(mutex);
+  return static_cast<uint8_t>(*(baseAddress + CADU_BITRATE_REG));
+}
+
 void AxiPtmeConfig::enableTxclockManipulator() {
   writeBit(COMMON_CONFIG_REG, true, BitPos::EN_TX_CLK_MANIPULATOR);
 }

linux/ipcore/AxiPtmeConfig.h

@@ -38,6 +38,7 @@ class AxiPtmeConfig : public SystemObject {
    *        frequency of the clock connected to the bit clock input of PTME.
    */
   ReturnValue_t writeCaduRateReg(uint8_t rateVal);
+  uint8_t readCaduRateReg();
 
   /**
    * @brief Next to functions control the tx clock manipulator component

linux/ipcore/PapbVcInterface.cpp

@@ -7,20 +7,16 @@
 
 #include "fsfw/serviceinterface/ServiceInterface.h"
 
-PapbVcInterface::PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbBusyId,
-                                 gpioId_t papbEmptyId, std::string uioFile, int mapNum)
-    : gpioComIF(gpioComIF),
-      papbBusyId(papbBusyId),
-      papbEmptyId(papbEmptyId),
-      uioFile(std::move(uioFile)),
-      mapNum(mapNum) {}
+PapbVcInterface::PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbEmptyId,
+                                 std::string uioFile, int mapNum)
+    : gpioComIF(gpioComIF), papbEmptyId(papbEmptyId), uioFile(std::move(uioFile)), mapNum(mapNum) {}
 
 PapbVcInterface::~PapbVcInterface() {}
 
 ReturnValue_t PapbVcInterface::initialize() {
   UioMapper uioMapper(uioFile, mapNum);
   ReturnValue_t result = uioMapper.getMappedAdress(const_cast<uint32_t**>(&vcBaseReg),
-                                                   UioMapper::Permissions::WRITE_ONLY);
+                                                   UioMapper::Permissions::READ_WRITE);
   if (result != returnvalue::OK) {
     return result;
   }
@@ -32,63 +28,27 @@ ReturnValue_t PapbVcInterface::write(const uint8_t* data, size_t size) {
   if (size < 4) {
     return returnvalue::FAILED;
   }
-  if (pollInterfaceReadiness(0, true) == returnvalue::OK) {
+  if (pollReadyForPacket()) {
     startPacketTransfer(ByteWidthCfg::ONE);
   } else {
     return DirectTmSinkIF::IS_BUSY;
   }
-  // TODO: This should work but does not.. :(
-  //  size_t idx = 0;
-  //  while (idx < size) {
-  //
-  //    nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
-  //    if ((size - idx) < 4) {
-  //      *vcBaseReg = CONFIG_DATA_INPUT | (size - idx - 1);
-  //      usleep(1);
-  //    }
-  //    if (pollPapbBusySignal(2) == returnvalue::OK) {
-  //      //      vcBaseReg + DATA_REG_OFFSET + 3 = static_cast<uint8_t>(data + idx);
-  //      //      vcBaseReg + DATA_REG_OFFSET + 2 = static_cast<uint8_t>(data + idx + 1);
-  //      //      vcBaseReg + DATA_REG_OFFSET + 1 = static_cast<uint8_t>(data + idx + 2);
-  //      //      vcBaseReg + DATA_REG_OFFSET = static_cast<uint8_t>(data + idx + 3);
-  //
-  //      // std::memcpy((vcBaseReg + DATA_REG_OFFSET), data + idx , nextWriteSize);
-  //      *(vcBaseReg + DATA_REG_OFFSET) = *reinterpret_cast<const uint32_t*>(data + idx);
-  //      //uint8_t* byteReg = reinterpret_cast<uint8_t*>(vcBaseReg + DATA_REG_OFFSET);
-  //
-  //      //byteReg[0] = data[idx];
-  //      //byteReg[1] = data[idx];
-  //    } else {
-  //      abortPacketTransfer();
-  //      return returnvalue::FAILED;
-  //    }
-  //    // TODO: Change this after the bugfix. Right now, the PAPB ignores the content of the byte
-  //    // width configuration.5
-  //    // It's okay to increment by a larger amount for the last segment here, loop will be over
-  //    // in any case.
-  //    idx += 4;
-  //  }
-  for (size_t idx = 0; idx < size; idx++) {
-    // This delay is super-important, DO NOT REMOVE!
-    // Polling the GPIO or the config register too often messes up the scheduler.
-    // TODO: Maybe this should not be done like this. It would be better if there was a custom
-    // FPGA module which can accept packets and then takes care of dumping that packet into
-    // the PTME. DMA would be an ideal solution for this.
-    nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
-    if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
-      *(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]);
-    } else {
-      abortPacketTransfer();
-      return returnvalue::FAILED;
-    }
-  }
-  nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
-  if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
-    completePacketTransfer();
-  } else {
+  if (not pollReadyForOctet(MAX_BUSY_POLLS)) {
     abortPacketTransfer();
     return returnvalue::FAILED;
   }
+  for (size_t idx = 0; idx < size; idx++) {
+    if (not pollReadyForOctet(MAX_BUSY_POLLS)) {
+      abortPacketTransfer();
+      return returnvalue::FAILED;
+    }
+    *(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]);
+  }
+  if (not pollReadyForOctet(MAX_BUSY_POLLS)) {
+    abortPacketTransfer();
+    return returnvalue::FAILED;
+  }
+  completePacketTransfer();
   return returnvalue::OK;
 }
 
@@ -98,63 +58,49 @@ void PapbVcInterface::startPacketTransfer(ByteWidthCfg initWidth) {
 
 void PapbVcInterface::completePacketTransfer() { *vcBaseReg = CONFIG_END; }
 
-ReturnValue_t PapbVcInterface::pollInterfaceReadiness(uint32_t maxPollRetries,
-                                                      bool checkReadyState) const {
-  uint32_t busyIdx = 0;
-  nextDelay.tv_nsec = FIRST_DELAY_PAPB_POLLING_NS;
-
-  while (true) {
-    // Check if PAPB interface is ready to receive data. Use the configuration register for this.
-    // Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
-    uint32_t reg = *vcBaseReg;
-    bool busy = (reg >> 5) & 0b1;
-    bool ready = (reg >> 6) & 0b1;
-    if (not busy) {
-      return returnvalue::OK;
-    }
-    if (checkReadyState and not ready) {
-      return PAPB_BUSY;
-    }
-
-    busyIdx++;
-    if (busyIdx >= maxPollRetries) {
-      return PAPB_BUSY;
-    }
-
-    // Ignore signal handling here for now.
-    nanosleep(&nextDelay, &remDelay);
-    // Adaptive delay.
-    if (nextDelay.tv_nsec * 2 <= MAX_DELAY_PAPB_POLLING_NS) {
-      nextDelay.tv_nsec *= 2;
-    }
-  }
-  return returnvalue::OK;
+bool PapbVcInterface::pollReadyForPacket() const {
+  //  Check if PAPB interface is ready to receive data. Use the configuration register for this.
+  //  Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
+  uint32_t reg = *vcBaseReg;
+  return (reg >> 6) & 0b1;
 }
 
-void PapbVcInterface::isVcInterfaceBufferEmpty() {
+bool PapbVcInterface::isVcInterfaceBufferEmpty() {
   ReturnValue_t result = returnvalue::OK;
   gpio::Levels papbEmptyState = gpio::Levels::HIGH;
 
   result = gpioComIF->readGpio(papbEmptyId, papbEmptyState);
 
   if (result != returnvalue::OK) {
-    sif::warning << "PapbVcInterface::isVcInterfaceBufferEmpty: Failed to read papb empty signal"
-                 << std::endl;
-    return;
+    sif::error << "PapbVcInterface::isVcInterfaceBufferEmpty: Failed to read papb empty signal"
+               << std::endl;
+    return true;
   }
 
   if (papbEmptyState == gpio::Levels::HIGH) {
-    sif::debug << "PapbVcInterface::isVcInterfaceBufferEmpty: Buffer is empty" << std::endl;
-  } else {
-    sif::debug << "PapbVcInterface::isVcInterfaceBufferEmpty: Buffer is not empty" << std::endl;
+    return true;
   }
-  return;
+  return false;
 }
 
-bool PapbVcInterface::isBusy() const { return pollInterfaceReadiness(0, true) == PAPB_BUSY; }
+bool PapbVcInterface::isBusy() const { return not pollReadyForPacket(); }
 
 void PapbVcInterface::cancelTransfer() { abortPacketTransfer(); }
 
+inline bool PapbVcInterface::pollReadyForOctet(uint32_t maxCycles) const {
+  uint32_t reg;
+  uint32_t idx = 0;
+  while (idx < maxCycles) {
+    reg = *vcBaseReg;
+    // Busy bit.
+    if (not((reg >> 5) & 0b1)) {
+      return true;
+    }
+    idx++;
+  }
+  return false;
+}
+
 ReturnValue_t PapbVcInterface::sendTestFrame() {
   /** Size of one complete transfer frame data field amounts to 1105 bytes */
   uint8_t testPacket[1105];

linux/ipcore/PapbVcInterface.h

@@ -30,8 +30,7 @@ class PapbVcInterface : public VirtualChannelIF {
    * @param uioFile       UIO file providing access to the PAPB bus
    * @param mapNum        Map number of UIO map associated with this virtual channel
    */
-  PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbBusyId, gpioId_t papbEmptyId,
-                  std::string uioFile, int mapNum);
+  PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbEmptyId, std::string uioFile, int mapNum);
   virtual ~PapbVcInterface();
 
   bool isBusy() const override;
@@ -81,11 +80,9 @@ class PapbVcInterface : public VirtualChannelIF {
 
   static constexpr long int FIRST_DELAY_PAPB_POLLING_NS = 10;
   static constexpr long int MAX_DELAY_PAPB_POLLING_NS = 40;
+  static constexpr uint32_t MAX_BUSY_POLLS = 1000;
 
   LinuxLibgpioIF* gpioComIF = nullptr;
-
-  /** Pulled to low when virtual channel not ready to receive data */
-  gpioId_t papbBusyId = gpio::NO_GPIO;
   /** High when external buffer memory of virtual channel is empty */
   gpioId_t papbEmptyId = gpio::NO_GPIO;
 
@@ -120,13 +117,15 @@ class PapbVcInterface : public VirtualChannelIF {
    *
    * @return  returnvalue::OK when ready to receive data else PAPB_BUSY.
    */
-  inline ReturnValue_t pollInterfaceReadiness(uint32_t maxPollRetries, bool checkReadyState) const;
+  inline bool pollReadyForPacket() const;
+
+  inline bool pollReadyForOctet(uint32_t maxCycles) const;
 
   /**
    * @brief   This function can be used for debugging to check whether there are packets in
    *          the packet buffer of the virtual channel or not.
    */
-  void isVcInterfaceBufferEmpty();
+  bool isVcInterfaceBufferEmpty();
 
   /**
    * @brief   This function sends a complete telemetry transfer frame data field (1105 bytes)

linux/ipcore/PdecHandler.cpp

@@ -435,8 +435,7 @@ ReturnValue_t PdecHandler::releasePdec() {
 }
 
 ReturnValue_t PdecHandler::pdecToReset() {
-  ReturnValue_t result = returnvalue::OK;
-  result = gpioComIF->pullLow(pdecReset);
+  ReturnValue_t result = gpioComIF->pullLow(pdecReset);
   if (result != returnvalue::OK) {
     sif::error << "PdecHandler::pdecToReset: Failed to pull PDEC reset line"
                   " to low"

linux/ipcore/PtmeConfig.cpp

@@ -26,6 +26,11 @@ ReturnValue_t PtmeConfig::setRate(uint32_t bitRate) {
   return axiPtmeConfig->writeCaduRateReg(static_cast<uint8_t>(rateVal));
 }
 
+uint32_t PtmeConfig::getRate() {
+  uint8_t rateReg = axiPtmeConfig->readCaduRateReg();
+  return (BIT_CLK_FREQ / (rateReg + 1));
+}
+
 void PtmeConfig::invertTxClock(bool invert) {
   if (invert) {
     axiPtmeConfig->enableTxclockInversion();

linux/ipcore/PtmeConfig.h

@@ -32,6 +32,7 @@ class PtmeConfig : public SystemObject {
    *          of the CADU clock due to the convolutional code added by the s-Band transceiver.
    */
   ReturnValue_t setRate(uint32_t bitRate);
+  uint32_t getRate();
 
   /**
    * @brief Will change the time the tx data signal is updated with respect to the tx clock

linux/payload/CMakeLists.txt

@@ -2,7 +2,8 @@ target_sources(
   ${OBSW_NAME}
   PUBLIC PlocMemoryDumper.cpp
          PlocMpsocHandler.cpp
-         PlocMpsocHelper.cpp
+         PlocMpsocSpecialComHelper.cpp
+         plocMpsocHelpers.cpp
          PlocSupervisorHandler.cpp
          PlocSupvUartMan.cpp
          ScexDleParser.cpp

linux/payload/PlocMpsocHandler.h

@@ -1,9 +1,9 @@
 #ifndef BSP_Q7S_DEVICES_PLOC_PLOCMPSOCHANDLER_H_
 #define BSP_Q7S_DEVICES_PLOC_PLOCMPSOCHANDLER_H_
 
-#include <linux/payload/PlocMpsocHelper.h>
+#include <linux/payload/PlocMpsocSpecialComHelper.h>
 #include <linux/payload/mpsocRetvals.h>
-#include <linux/payload/plocMpscoDefs.h>
+#include <linux/payload/plocMpsocHelpers.h>
 #include <linux/payload/plocSupvDefs.h>
 
 #include <string>
@@ -28,9 +28,10 @@
  * @note The sequence count in the space packets must be incremented with each received and sent
  *       packet otherwise the MPSoC will reply with an acknowledgment failure report.
  *
- * @author	J. Meier
+ * NOTE: This is not an example for a good device handler, DO NOT USE THIS AS A REFERENCE HANDLER.
+ * @author	J. Meier, R. Mueller
  */
-class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
+class PlocMpsocHandler : public DeviceHandlerBase, public CommandsActionsIF {
  public:
   /**
    * @brief Constructor
@@ -43,10 +44,10 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
    *                            module in the programmable logic
    * @param supervisorHandler   Object ID of the supervisor handler
    */
-  PlocMPSoCHandler(object_id_t objectId, object_id_t uartComIFid, CookieIF* comCookie,
-                   PlocMPSoCHelper* plocMPSoCHelper, Gpio uartIsolatorSwitch,
+  PlocMpsocHandler(object_id_t objectId, object_id_t uartComIFid, CookieIF* comCookie,
+                   PlocMpsocSpecialComHelper* plocMPSoCHelper, Gpio uartIsolatorSwitch,
                    object_id_t supervisorHandler);
-  virtual ~PlocMPSoCHandler();
+  virtual ~PlocMpsocHandler();
   virtual ReturnValue_t initialize() override;
   ReturnValue_t executeAction(ActionId_t actionId, MessageQueueId_t commandedBy,
                               const uint8_t* data, size_t size) override;
@@ -77,7 +78,9 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
                                       uint8_t expectedReplies = 1, bool useAlternateId = false,
                                       DeviceCommandId_t alternateReplyID = 0) override;
   size_t getNextReplyLength(DeviceCommandId_t deviceCommand) override;
-  virtual ReturnValue_t doSendReadHook() override;
+  ReturnValue_t doSendReadHook() override;
+  LocalPoolDataSetBase* getDataSetHandle(sid_t sid) override;
+  bool dontCheckQueue() override;
 
  private:
   static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PLOC_MPSOC_HANDLER;
@@ -103,7 +106,8 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
 
   static const uint16_t APID_MASK = 0x7FF;
   static const uint16_t PACKET_SEQUENCE_COUNT_MASK = 0x3FFF;
-  static const uint8_t STATUS_OFFSET = 10;
+
+  mpsoc::HkReport hkReport;
 
   MessageQueueIF* eventQueue = nullptr;
   MessageQueueIF* commandActionHelperQueue = nullptr;
@@ -114,6 +118,41 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
   SpacePacketCreator creator;
   ploc::SpTcParams spParams = ploc::SpTcParams(creator);
 
+  PoolEntry<uint32_t> peStatus = PoolEntry<uint32_t>();
+  PoolEntry<uint8_t> peMode = PoolEntry<uint8_t>();
+  PoolEntry<uint8_t> peDownlinkPwrOn = PoolEntry<uint8_t>();
+  PoolEntry<uint8_t> peDownlinkReplyActive = PoolEntry<uint8_t>();
+  PoolEntry<uint8_t> peDownlinkJesdSyncStatus = PoolEntry<uint8_t>();
+  PoolEntry<uint8_t> peDownlinkDacStatus = PoolEntry<uint8_t>();
+  PoolEntry<uint8_t> peCameraStatus = PoolEntry<uint8_t>();
+  PoolEntry<uint8_t> peCameraSdiStatus = PoolEntry<uint8_t>();
+  PoolEntry<float> peCameraFpgaTemp = PoolEntry<float>();
+  PoolEntry<float> peCameraSocTemp = PoolEntry<float>();
+  PoolEntry<float> peSysmonTemp = PoolEntry<float>();
+  PoolEntry<float> peSysmonVccInt = PoolEntry<float>();
+  PoolEntry<float> peSysmonVccAux = PoolEntry<float>();
+  PoolEntry<float> peSysmonVccBram = PoolEntry<float>();
+  PoolEntry<float> peSysmonVccPaux = PoolEntry<float>();
+  PoolEntry<float> peSysmonVccPint = PoolEntry<float>();
+  PoolEntry<float> peSysmonVccPdro = PoolEntry<float>();
+  PoolEntry<float> peSysmonMb12V = PoolEntry<float>();
+  PoolEntry<float> peSysmonMb3V3 = PoolEntry<float>();
+  PoolEntry<float> peSysmonMb1V8 = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc12V = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc5V = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc3V3 = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc3V3VA = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc2V5DDR = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc1V2DDR = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc0V9 = PoolEntry<float>();
+  PoolEntry<float> peSysmonVcc0V6VTT = PoolEntry<float>();
+  PoolEntry<float> peSysmonSafeCotsCur = PoolEntry<float>();
+  PoolEntry<float> peSysmonNvm4XoCur = PoolEntry<float>();
+  PoolEntry<uint16_t> peSemUncorrectableErrs = PoolEntry<uint16_t>();
+  PoolEntry<uint16_t> peSemCorrectableErrs = PoolEntry<uint16_t>();
+  PoolEntry<uint8_t> peSemStatus = PoolEntry<uint8_t>();
+  PoolEntry<uint8_t> peRebootMpsocRequired = PoolEntry<uint8_t>();
+
   /**
    * This variable is used to store the id of the next reply to receive. This is necessary
    * because the PLOC sends as reply to each command at least one acknowledgment and execution
@@ -123,13 +162,14 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
 
   SerialComIF* uartComIf = nullptr;
 
-  PlocMPSoCHelper* plocMPSoCHelper = nullptr;
+  PlocMpsocSpecialComHelper* specialComHelper = nullptr;
   Gpio uartIsolatorSwitch;
   object_id_t supervisorHandler = 0;
   CommandActionHelper commandActionHelper;
 
   // Used to block incoming commands when MPSoC helper class is currently executing a command
-  bool plocMPSoCHelperExecuting = false;
+  bool specialComHelperExecuting = false;
+  bool commandIsPending = false;
 
   struct TmMemReadReport {
     static const uint8_t FIX_SIZE = 14;
@@ -137,20 +177,18 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
   };
 
   TmMemReadReport tmMemReadReport;
-
-  struct TmCamCmdRpt {
-    size_t rememberSpacePacketSize = 0;
-  };
-
-  TmCamCmdRpt tmCamCmdRpt;
+  Countdown cmdCountdown = Countdown(10000);
 
   struct TelemetryBuffer {
     uint16_t length = 0;
     uint8_t buffer[mpsoc::SP_MAX_SIZE];
   };
 
+  size_t foundPacketLen = 0;
   TelemetryBuffer tmBuffer;
+  uint32_t waitCycles = 0;
 
+  enum class StartupState { IDLE, HW_INIT, WAIT_CYCLES, DONE } startupState = StartupState::IDLE;
   enum class PowerState { OFF, BOOTING, SHUTDOWN, ON };
 
   PowerState powerState = PowerState::OFF;
@@ -167,6 +205,8 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
   ReturnValue_t prepareTcReplayStop();
   ReturnValue_t prepareTcDownlinkPwrOn(const uint8_t* commandData, size_t commandDataLen);
   ReturnValue_t prepareTcDownlinkPwrOff();
+  ReturnValue_t prepareTcGetHkReport();
+  ReturnValue_t prepareTcGetDirContent(const uint8_t* commandData, size_t commandDataLen);
   ReturnValue_t prepareTcReplayWriteSequence(const uint8_t* commandData, size_t commandDataLen);
   ReturnValue_t prepareTcCamCmdSend(const uint8_t* commandData, size_t commandDataLen);
   ReturnValue_t prepareTcModeIdle();
@@ -174,7 +214,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
   ReturnValue_t prepareTcSimplexSendFile(const uint8_t* commandData, size_t commandDataLen);
   ReturnValue_t prepareTcDownlinkDataModulate(const uint8_t* commandData, size_t commandDataLen);
   ReturnValue_t prepareTcModeSnapshot();
-  void finishTcPrep(size_t packetLen);
+  ReturnValue_t finishTcPrep(mpsoc::TcBase& tcBase);
 
   /**
    * @brief   This function checks the crc of the received PLOC reply.
@@ -213,6 +253,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
    */
   ReturnValue_t handleMemoryReadReport(const uint8_t* data);
 
+  ReturnValue_t handleGetHkReport(const uint8_t* data);
   ReturnValue_t handleCamCmdRpt(const uint8_t* data);
 
   /**
@@ -231,7 +272,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
    * @param dataSize  Size of telemetry in bytes.
    * @param replyId   Id of the reply. This will be added to the ActionMessage.
    */
-  void handleDeviceTM(const uint8_t* data, size_t dataSize, DeviceCommandId_t replyId);
+  void handleDeviceTm(const uint8_t* data, size_t dataSize, DeviceCommandId_t replyId);
 
   /**
    * @brief   In case an acknowledgment failure reply has been received this function disables
@@ -255,15 +296,11 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
    */
   void disableExeReportReply();
 
-  void printStatus(const uint8_t* data);
-
   ReturnValue_t prepareTcModeReplay();
 
-  uint16_t getStatus(const uint8_t* data);
+  void cmdDoneHandler(bool success, ReturnValue_t result);
 
   void handleActionCommandFailure(ActionId_t actionId);
-
-  std::string getStatusString(uint16_t status);
 };
 
 #endif /* BSP_Q7S_DEVICES_PLOC_PLOCMPSOCHANDLER_H_ */

linux/payload/PlocMpsocHelper.cpp

@@ -1,355 +0,0 @@
-#include <linux/payload/PlocMpsocHelper.h>
-
-#include <filesystem>
-#include <fstream>
-
-#ifdef XIPHOS_Q7S
-#include "bsp_q7s/fs/FilesystemHelper.h"
-#endif
-
-#include "mission/utility/Timestamp.h"
-
-using namespace ploc;
-
-PlocMPSoCHelper::PlocMPSoCHelper(object_id_t objectId) : SystemObject(objectId) {
-  spParams.buf = commandBuffer;
-  spParams.maxSize = sizeof(commandBuffer);
-}
-
-PlocMPSoCHelper::~PlocMPSoCHelper() {}
-
-ReturnValue_t PlocMPSoCHelper::initialize() {
-#ifdef XIPHOS_Q7S
-  sdcMan = SdCardManager::instance();
-  if (sdcMan == nullptr) {
-    sif::warning << "PlocMPSoCHelper::initialize: Invalid SD Card Manager" << std::endl;
-    return returnvalue::FAILED;
-  }
-#endif
-  return returnvalue::OK;
-}
-
-ReturnValue_t PlocMPSoCHelper::performOperation(uint8_t operationCode) {
-  ReturnValue_t result = returnvalue::OK;
-  semaphore.acquire();
-  while (true) {
-#if OBSW_THREAD_TRACING == 1
-    trace::threadTrace(opCounter, "PLOC MPSOC Helper");
-#endif
-    switch (internalState) {
-      case InternalState::IDLE: {
-        semaphore.acquire();
-        break;
-      }
-      case InternalState::FLASH_WRITE: {
-        result = performFlashWrite();
-        if (result == returnvalue::OK) {
-          triggerEvent(MPSOC_FLASH_WRITE_SUCCESSFUL);
-        } else {
-          triggerEvent(MPSOC_FLASH_WRITE_FAILED);
-        }
-        internalState = InternalState::IDLE;
-        break;
-      }
-      default:
-        sif::debug << "PlocMPSoCHelper::performOperation: Invalid state" << std::endl;
-        break;
-    }
-  }
-}
-
-ReturnValue_t PlocMPSoCHelper::setComIF(DeviceCommunicationIF* communicationInterface_) {
-  uartComIF = dynamic_cast<SerialComIF*>(communicationInterface_);
-  if (uartComIF == nullptr) {
-    sif::warning << "PlocMPSoCHelper::initialize: Invalid uart com if" << std::endl;
-    return returnvalue::FAILED;
-  }
-  return returnvalue::OK;
-}
-
-void PlocMPSoCHelper::setComCookie(CookieIF* comCookie_) { comCookie = comCookie_; }
-
-void PlocMPSoCHelper::setSequenceCount(SourceSequenceCounter* sequenceCount_) {
-  sequenceCount = sequenceCount_;
-}
-
-ReturnValue_t PlocMPSoCHelper::startFlashWrite(std::string obcFile, std::string mpsocFile) {
-  ReturnValue_t result = returnvalue::OK;
-#ifdef XIPHOS_Q7S
-  result = FilesystemHelper::checkPath(obcFile);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  result = FilesystemHelper::fileExists(mpsocFile);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-#endif
-#ifdef TE0720_1CFA
-  if (not std::filesystem::exists(obcFile)) {
-    sif::warning << "PlocMPSoCHelper::startFlashWrite: File " << obcFile << "does not exist"
-                 << std::endl;
-    return returnvalue::FAILED;
-  }
-#endif
-
-  flashWrite.obcFile = obcFile;
-  flashWrite.mpsocFile = mpsocFile;
-  internalState = InternalState::FLASH_WRITE;
-  result = resetHelper();
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return result;
-}
-
-ReturnValue_t PlocMPSoCHelper::resetHelper() {
-  ReturnValue_t result = returnvalue::OK;
-  semaphore.release();
-  spParams.buf = commandBuffer;
-  terminate = false;
-  result = uartComIF->flushUartRxBuffer(comCookie);
-  return result;
-}
-
-void PlocMPSoCHelper::stopProcess() { terminate = true; }
-
-ReturnValue_t PlocMPSoCHelper::performFlashWrite() {
-  ReturnValue_t result = returnvalue::OK;
-  result = flashfopen();
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  uint8_t tempData[mpsoc::MAX_DATA_SIZE];
-  std::ifstream file(flashWrite.obcFile, std::ifstream::binary);
-  // Set position of next character to end of file input stream
-  file.seekg(0, file.end);
-  // tellg returns position of character in input stream
-  size_t remainingSize = file.tellg();
-  size_t dataLength = 0;
-  size_t bytesRead = 0;
-  while (remainingSize > 0) {
-    if (terminate) {
-      return returnvalue::OK;
-    }
-    if (remainingSize > mpsoc::MAX_DATA_SIZE) {
-      dataLength = mpsoc::MAX_DATA_SIZE;
-    } else {
-      dataLength = remainingSize;
-    }
-    if (file.is_open()) {
-      file.seekg(bytesRead, file.beg);
-      file.read(reinterpret_cast<char*>(tempData), dataLength);
-      bytesRead += dataLength;
-      remainingSize -= dataLength;
-    } else {
-      return FILE_CLOSED_ACCIDENTALLY;
-    }
-    (*sequenceCount)++;
-    mpsoc::TcFlashWrite tc(spParams, *sequenceCount);
-    result = tc.buildPacket(tempData, dataLength);
-    if (result != returnvalue::OK) {
-      return result;
-    }
-    result = handlePacketTransmission(tc);
-    if (result != returnvalue::OK) {
-      return result;
-    }
-  }
-  result = flashfclose();
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return result;
-}
-
-ReturnValue_t PlocMPSoCHelper::flashfopen() {
-  ReturnValue_t result = returnvalue::OK;
-  spParams.buf = commandBuffer;
-  (*sequenceCount)++;
-  mpsoc::FlashFopen flashFopen(spParams, *sequenceCount);
-  result = flashFopen.createPacket(flashWrite.mpsocFile, mpsoc::FlashFopen::APPEND);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  result = handlePacketTransmission(flashFopen);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
-}
-
-ReturnValue_t PlocMPSoCHelper::flashfclose() {
-  ReturnValue_t result = returnvalue::OK;
-  spParams.buf = commandBuffer;
-  (*sequenceCount)++;
-  mpsoc::FlashFclose flashFclose(spParams, *sequenceCount);
-  result = flashFclose.createPacket(flashWrite.mpsocFile);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  result = handlePacketTransmission(flashFclose);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
-}
-
-ReturnValue_t PlocMPSoCHelper::handlePacketTransmission(ploc::SpTcBase& tc) {
-  ReturnValue_t result = returnvalue::OK;
-  result = sendCommand(tc);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  result = handleAck();
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  result = handleExe();
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  return returnvalue::OK;
-}
-
-ReturnValue_t PlocMPSoCHelper::sendCommand(ploc::SpTcBase& tc) {
-  ReturnValue_t result = returnvalue::OK;
-  result = uartComIF->sendMessage(comCookie, tc.getFullPacket(), tc.getFullPacketLen());
-  if (result != returnvalue::OK) {
-    sif::warning << "PlocMPSoCHelper::sendCommand: Failed to send command" << std::endl;
-    triggerEvent(MPSOC_SENDING_COMMAND_FAILED, result, static_cast<uint32_t>(internalState));
-    return result;
-  }
-  return result;
-}
-
-ReturnValue_t PlocMPSoCHelper::handleAck() {
-  ReturnValue_t result = returnvalue::OK;
-  result = handleTmReception(mpsoc::SIZE_ACK_REPORT);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  SpTmReader tmPacket(tmBuf.data(), tmBuf.size());
-  result = checkReceivedTm(tmPacket);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  uint16_t apid = tmPacket.getApid();
-  if (apid != mpsoc::apid::ACK_SUCCESS) {
-    handleAckApidFailure(apid);
-    return returnvalue::FAILED;
-  }
-  return returnvalue::OK;
-}
-
-void PlocMPSoCHelper::handleAckApidFailure(uint16_t apid) {
-  if (apid == mpsoc::apid::ACK_FAILURE) {
-    triggerEvent(MPSOC_ACK_FAILURE_REPORT, static_cast<uint32_t>(internalState));
-    sif::warning << "PlocMPSoCHelper::handleAckApidFailure: Received acknowledgement failure "
-                 << "report" << std::endl;
-  } else {
-    triggerEvent(MPSOC_ACK_INVALID_APID, apid, static_cast<uint32_t>(internalState));
-    sif::warning << "PlocMPSoCHelper::handleAckApidFailure: Expected acknowledgement report "
-                 << "but received space packet with apid " << std::hex << apid << std::endl;
-  }
-}
-
-ReturnValue_t PlocMPSoCHelper::handleExe() {
-  ReturnValue_t result = returnvalue::OK;
-
-  result = handleTmReception(mpsoc::SIZE_EXE_REPORT);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  ploc::SpTmReader tmPacket(tmBuf.data(), tmBuf.size());
-  result = checkReceivedTm(tmPacket);
-  if (result != returnvalue::OK) {
-    return result;
-  }
-  uint16_t apid = tmPacket.getApid();
-  if (apid != mpsoc::apid::EXE_SUCCESS) {
-    handleExeApidFailure(apid);
-    return returnvalue::FAILED;
-  }
-  return returnvalue::OK;
-}
-
-void PlocMPSoCHelper::handleExeApidFailure(uint16_t apid) {
-  if (apid == mpsoc::apid::EXE_FAILURE) {
-    triggerEvent(MPSOC_EXE_FAILURE_REPORT, static_cast<uint32_t>(internalState));
-    sif::warning << "PlocMPSoCHelper::handleExeApidFailure: Received execution failure "
-                 << "report" << std::endl;
-  } else {
-    triggerEvent(MPSOC_EXE_INVALID_APID, apid, static_cast<uint32_t>(internalState));
-    sif::warning << "PlocMPSoCHelper::handleExeApidFailure: Expected execution report "
-                 << "but received space packet with apid " << std::hex << apid << std::endl;
-  }
-}
-
-ReturnValue_t PlocMPSoCHelper::handleTmReception(size_t remainingBytes) {
-  ReturnValue_t result = returnvalue::OK;
-  size_t readBytes = 0;
-  size_t currentBytes = 0;
-  for (int retries = 0; retries < RETRIES; retries++) {
-    result = receive(tmBuf.data() + readBytes, &currentBytes, remainingBytes);
-    if (result != returnvalue::OK) {
-      return result;
-    }
-    readBytes += currentBytes;
-    remainingBytes = remainingBytes - currentBytes;
-    if (remainingBytes == 0) {
-      break;
-    }
-  }
-  if (remainingBytes != 0) {
-    sif::warning << "PlocMPSoCHelper::handleTmReception: Failed to receive reply" << std::endl;
-    triggerEvent(MPSOC_MISSING_EXE, remainingBytes, static_cast<uint32_t>(internalState));
-    return returnvalue::FAILED;
-  }
-  return result;
-}
-
-ReturnValue_t PlocMPSoCHelper::checkReceivedTm(SpTmReader& reader) {
-  ReturnValue_t result = reader.checkSize();
-  if (result != returnvalue::OK) {
-    sif::error << "PlocMPSoCHelper::handleTmReception: Size check on received TM failed"
-               << std::endl;
-    triggerEvent(MPSOC_TM_SIZE_ERROR);
-    return result;
-  }
-  reader.checkCrc();
-  if (result != returnvalue::OK) {
-    sif::warning << "PlocMPSoCHelper::handleTmReception: CRC check failed" << std::endl;
-    triggerEvent(MPSOC_TM_CRC_MISSMATCH, *sequenceCount);
-    return result;
-  }
-  (*sequenceCount)++;
-  uint16_t recvSeqCnt = reader.getSequenceCount();
-  if (recvSeqCnt != *sequenceCount) {
-    triggerEvent(MPSOC_HELPER_SEQ_CNT_MISMATCH, *sequenceCount, recvSeqCnt);
-    *sequenceCount = recvSeqCnt;
-  }
-  return returnvalue::OK;
-}
-
-ReturnValue_t PlocMPSoCHelper::receive(uint8_t* data, size_t* readBytes, size_t requestBytes) {
-  ReturnValue_t result = returnvalue::OK;
-  uint8_t* buffer = nullptr;
-  result = uartComIF->requestReceiveMessage(comCookie, requestBytes);
-  if (result != returnvalue::OK) {
-    sif::warning << "PlocMPSoCHelper::receive: Failed to request reply" << std::endl;
-    triggerEvent(MPSOC_HELPER_REQUESTING_REPLY_FAILED, result,
-                 static_cast<uint32_t>(static_cast<uint32_t>(internalState)));
-    return returnvalue::FAILED;
-  }
-  result = uartComIF->readReceivedMessage(comCookie, &buffer, readBytes);
-  if (result != returnvalue::OK) {
-    sif::warning << "PlocMPSoCHelper::receive: Failed to read received message" << std::endl;
-    triggerEvent(MPSOC_HELPER_READING_REPLY_FAILED, result, static_cast<uint32_t>(internalState));
-    return returnvalue::FAILED;
-  }
-  if (*readBytes > 0) {
-    std::memcpy(data, buffer, *readBytes);
-  }
-  return result;
-}

linux/payload/PlocMpsocSpecialComHelper.cpp

@@ -0,0 +1,544 @@
+#include <fsfw/globalfunctions/arrayprinter.h>
+#include <fsfw/tasks/TaskFactory.h>
+#include <linux/payload/PlocMpsocSpecialComHelper.h>
+#include <unistd.h>
+
+#include <filesystem>
+#include <fstream>
+
+#ifdef XIPHOS_Q7S
+#include "bsp_q7s/fs/FilesystemHelper.h"
+#endif
+
+#include "mission/utility/Timestamp.h"
+
+using namespace ploc;
+
+PlocMpsocSpecialComHelper::PlocMpsocSpecialComHelper(object_id_t objectId)
+    : SystemObject(objectId) {
+  spParams.buf = commandBuffer;
+  spParams.maxSize = sizeof(commandBuffer);
+}
+
+PlocMpsocSpecialComHelper::~PlocMpsocSpecialComHelper() {}
+
+ReturnValue_t PlocMpsocSpecialComHelper::initialize() {
+#ifdef XIPHOS_Q7S
+  sdcMan = SdCardManager::instance();
+  if (sdcMan == nullptr) {
+    sif::warning << "PlocMPSoCHelper::initialize: Invalid SD Card Manager" << std::endl;
+    return returnvalue::FAILED;
+  }
+#endif
+  return returnvalue::OK;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::performOperation(uint8_t operationCode) {
+  ReturnValue_t result = returnvalue::OK;
+  semaphore.acquire();
+  while (true) {
+#if OBSW_THREAD_TRACING == 1
+    trace::threadTrace(opCounter, "PLOC MPSOC Helper");
+#endif
+    switch (internalState) {
+      case InternalState::IDLE: {
+        semaphore.acquire();
+        break;
+      }
+      case InternalState::FLASH_WRITE: {
+        result = performFlashWrite();
+        if (result == returnvalue::OK) {
+          triggerEvent(MPSOC_FLASH_WRITE_SUCCESSFUL, sequenceCount->get());
+        } else {
+          triggerEvent(MPSOC_FLASH_WRITE_FAILED, sequenceCount->get());
+        }
+        internalState = InternalState::IDLE;
+        break;
+      }
+      case InternalState::FLASH_READ: {
+        result = performFlashRead();
+        if (result == returnvalue::OK) {
+          triggerEvent(MPSOC_FLASH_READ_SUCCESSFUL, sequenceCount->get());
+        } else {
+          triggerEvent(MPSOC_FLASH_READ_FAILED, sequenceCount->get());
+        }
+        internalState = InternalState::IDLE;
+        break;
+      }
+      default:
+        sif::debug << "PlocMPSoCHelper::performOperation: Invalid state" << std::endl;
+        break;
+    }
+  }
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::setComIF(DeviceCommunicationIF* communicationInterface_) {
+  uartComIF = dynamic_cast<SerialComIF*>(communicationInterface_);
+  if (uartComIF == nullptr) {
+    sif::warning << "PlocMPSoCHelper::initialize: Invalid uart com if" << std::endl;
+    return returnvalue::FAILED;
+  }
+  return returnvalue::OK;
+}
+
+void PlocMpsocSpecialComHelper::setComCookie(CookieIF* comCookie_) { comCookie = comCookie_; }
+
+void PlocMpsocSpecialComHelper::setSequenceCount(SourceSequenceCounter* sequenceCount_) {
+  sequenceCount = sequenceCount_;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::startFlashWrite(std::string obcFile,
+                                                         std::string mpsocFile) {
+  if (internalState != InternalState::IDLE) {
+    return returnvalue::FAILED;
+  }
+  ReturnValue_t result = startFlashReadOrWriteBase(std::move(obcFile), std::move(mpsocFile));
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  internalState = InternalState::FLASH_WRITE;
+  return semaphore.release();
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::startFlashRead(std::string obcFile, std::string mpsocFile,
+                                                        size_t readFileSize) {
+  if (internalState != InternalState::IDLE) {
+    return returnvalue::FAILED;
+  }
+  ReturnValue_t result = startFlashReadOrWriteBase(std::move(obcFile), std::move(mpsocFile));
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  flashReadAndWrite.totalReadSize = readFileSize;
+  internalState = InternalState::FLASH_READ;
+  return semaphore.release();
+}
+
+void PlocMpsocSpecialComHelper::resetHelper() {
+  spParams.buf = commandBuffer;
+  terminate = false;
+  uartComIF->flushUartRxBuffer(comCookie);
+}
+
+void PlocMpsocSpecialComHelper::stopProcess() { terminate = true; }
+
+ReturnValue_t PlocMpsocSpecialComHelper::performFlashWrite() {
+  ReturnValue_t result = returnvalue::OK;
+  std::ifstream file(flashReadAndWrite.obcFile, std::ifstream::binary);
+  if (file.bad()) {
+    return returnvalue::FAILED;
+  }
+  result = flashfopen(mpsoc::FileAccessModes::WRITE | mpsoc::FileAccessModes::OPEN_ALWAYS);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  // Set position of next character to end of file input stream
+  file.seekg(0, file.end);
+  // tellg returns position of character in input stream
+  size_t remainingSize = file.tellg();
+  size_t dataLength = 0;
+  size_t bytesRead = 0;
+  while (remainingSize > 0) {
+    if (terminate) {
+      return returnvalue::OK;
+    }
+    // The minus 4 is necessary for unknown reasons. Maybe some bug in the ILH software?
+    if (remainingSize > mpsoc::MAX_FLASH_WRITE_DATA_SIZE - 4) {
+      dataLength = mpsoc::MAX_FLASH_WRITE_DATA_SIZE - 4;
+    } else {
+      dataLength = remainingSize;
+    }
+    if (file.bad() or not file.is_open()) {
+      return FILE_WRITE_ERROR;
+    }
+    file.seekg(bytesRead, file.beg);
+    file.read(reinterpret_cast<char*>(fileBuf.data()), dataLength);
+    bytesRead += dataLength;
+    remainingSize -= dataLength;
+    mpsoc::TcFlashWrite tc(spParams, *sequenceCount);
+    result = tc.setPayload(fileBuf.data(), dataLength);
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    result = tc.finishPacket();
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    (*sequenceCount)++;
+    result = handlePacketTransmissionNoReply(tc);
+    if (result != returnvalue::OK) {
+      return result;
+    }
+  }
+  result = flashfclose();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  return result;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::performFlashRead() {
+  std::error_code e;
+  std::ofstream ofile(flashReadAndWrite.obcFile, std::ios::trunc | std::ios::binary);
+  if (ofile.bad()) {
+    return returnvalue::FAILED;
+  }
+  ReturnValue_t result = flashfopen(mpsoc::FileAccessModes::READ);
+  if (result != returnvalue::OK) {
+    std::filesystem::remove(flashReadAndWrite.obcFile, e);
+    return result;
+  }
+  size_t readSoFar = 0;
+  size_t nextReadSize = mpsoc::MAX_FLASH_READ_DATA_SIZE;
+  while (readSoFar < flashReadAndWrite.totalReadSize) {
+    if (terminate) {
+      std::filesystem::remove(flashReadAndWrite.obcFile, e);
+      return returnvalue::OK;
+    }
+    nextReadSize = mpsoc::MAX_FLASH_READ_DATA_SIZE;
+    if (flashReadAndWrite.totalReadSize - readSoFar < mpsoc::MAX_FLASH_READ_DATA_SIZE) {
+      nextReadSize = flashReadAndWrite.totalReadSize - readSoFar;
+    }
+    if (ofile.bad() or not ofile.is_open()) {
+      std::filesystem::remove(flashReadAndWrite.obcFile, e);
+      return FILE_READ_ERROR;
+    }
+    mpsoc::TcFlashRead flashReadRequest(spParams, *sequenceCount);
+    result = flashReadRequest.setPayload(nextReadSize);
+    if (result != returnvalue::OK) {
+      std::filesystem::remove(flashReadAndWrite.obcFile, e);
+      return result;
+    }
+    result = flashReadRequest.finishPacket();
+    if (result != returnvalue::OK) {
+      std::filesystem::remove(flashReadAndWrite.obcFile, e);
+      return result;
+    }
+    (*sequenceCount)++;
+    result = handlePacketTransmissionFlashRead(flashReadRequest, ofile, nextReadSize);
+    if (result != returnvalue::OK) {
+      std::filesystem::remove(flashReadAndWrite.obcFile, e);
+      return result;
+    }
+    readSoFar += nextReadSize;
+  }
+  result = flashfclose();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  return result;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::flashfopen(uint8_t mode) {
+  spParams.buf = commandBuffer;
+  mpsoc::FlashFopen flashFopen(spParams, *sequenceCount);
+  ReturnValue_t result = flashFopen.setPayload(flashReadAndWrite.mpsocFile, mode);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  result = flashFopen.finishPacket();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  (*sequenceCount)++;
+  result = handlePacketTransmissionNoReply(flashFopen);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  return returnvalue::OK;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::flashfclose() {
+  spParams.buf = commandBuffer;
+  mpsoc::FlashFclose flashFclose(spParams, *sequenceCount);
+  ReturnValue_t result = flashFclose.finishPacket();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  (*sequenceCount)++;
+  result = handlePacketTransmissionNoReply(flashFclose);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  return result;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::handlePacketTransmissionFlashRead(mpsoc::TcFlashRead& tc,
+                                                                           std::ofstream& ofile,
+                                                                           size_t expectedReadLen) {
+  ReturnValue_t result = sendCommand(tc);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  result = handleAck();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  result = handleTmReception();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+
+  // We have the nominal case where the flash read report appears first, or the case where we
+  // get an EXE failure immediately.
+  if (spReader.getApid() == mpsoc::apid::TM_FLASH_READ_REPORT) {
+    result = handleFlashReadReply(ofile, expectedReadLen);
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    return handleExe();
+  } else if (spReader.getApid() == mpsoc::apid::EXE_FAILURE) {
+    handleExeFailure();
+  } else {
+    triggerEvent(MPSOC_EXE_INVALID_APID, spReader.getApid(), static_cast<uint32_t>(internalState));
+    sif::warning << "PLOC MPSoC: Expected execution report "
+                 << "but received space packet with apid " << std::hex << spReader.getApid()
+                 << std::endl;
+  }
+  return returnvalue::FAILED;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::handlePacketTransmissionNoReply(ploc::SpTcBase& tc) {
+  ReturnValue_t result = sendCommand(tc);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  result = handleAck();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  return handleExe();
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::sendCommand(ploc::SpTcBase& tc) {
+  ReturnValue_t result = returnvalue::OK;
+  result = uartComIF->sendMessage(comCookie, tc.getFullPacket(), tc.getFullPacketLen());
+  if (result != returnvalue::OK) {
+    sif::warning << "PlocMPSoCHelper::sendCommand: Failed to send command" << std::endl;
+    triggerEvent(MPSOC_SENDING_COMMAND_FAILED, result, static_cast<uint32_t>(internalState));
+    return result;
+  }
+  return result;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::handleAck() {
+  ReturnValue_t result = returnvalue::OK;
+  result = handleTmReception();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  result = checkReceivedTm();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  uint16_t apid = spReader.getApid();
+  if (apid != mpsoc::apid::ACK_SUCCESS) {
+    handleAckApidFailure(spReader);
+    return returnvalue::FAILED;
+  }
+  return returnvalue::OK;
+}
+
+void PlocMpsocSpecialComHelper::handleAckApidFailure(const ploc::SpTmReader& reader) {
+  uint16_t apid = reader.getApid();
+  if (apid == mpsoc::apid::ACK_FAILURE) {
+    uint16_t status = mpsoc::getStatusFromRawData(reader.getFullData());
+    sif::warning << "PLOC MPSoC ACK Failure: " << mpsoc::getStatusString(status) << std::endl;
+    triggerEvent(MPSOC_ACK_FAILURE_REPORT, static_cast<uint32_t>(internalState), status);
+  } else {
+    triggerEvent(MPSOC_ACK_INVALID_APID, apid, static_cast<uint32_t>(internalState));
+    sif::warning << "PlocMPSoCHelper::handleAckApidFailure: Expected acknowledgement report "
+                 << "but received space packet with apid " << std::hex << apid << std::endl;
+  }
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::handleExe() {
+  ReturnValue_t result = returnvalue::OK;
+
+  result = handleTmReception();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  result = checkReceivedTm();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  uint16_t apid = spReader.getApid();
+  if (apid == mpsoc::apid::EXE_FAILURE) {
+    handleExeFailure();
+    return returnvalue::FAILED;
+  } else if (apid != mpsoc::apid::EXE_SUCCESS) {
+    triggerEvent(MPSOC_EXE_INVALID_APID, apid, static_cast<uint32_t>(internalState));
+    sif::warning << "PLOC MPSoC: Expected execution report "
+                 << "but received space packet with apid " << std::hex << apid << std::endl;
+  }
+  return returnvalue::OK;
+}
+
+void PlocMpsocSpecialComHelper::handleExeFailure() {
+  uint16_t status = mpsoc::getStatusFromRawData(spReader.getFullData());
+  sif::warning << "PLOC MPSoC EXE Failure: " << mpsoc::getStatusString(status) << std::endl;
+  triggerEvent(MPSOC_EXE_FAILURE_REPORT, static_cast<uint32_t>(internalState));
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::handleTmReception() {
+  ReturnValue_t result = returnvalue::OK;
+  tmCountdown.resetTimer();
+  size_t readBytes = 0;
+  size_t currentBytes = 0;
+  uint32_t usleepDelay = 5;
+  size_t fullPacketLen = 0;
+  while (true) {
+    if (tmCountdown.hasTimedOut()) {
+      triggerEvent(MPSOC_READ_TIMEOUT, tmCountdown.getTimeoutMs());
+      return returnvalue::FAILED;
+    }
+    result = receive(tmBuf.data() + readBytes, 6, &currentBytes);
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    spReader.setReadOnlyData(tmBuf.data(), tmBuf.size());
+    fullPacketLen = spReader.getFullPacketLen();
+    readBytes += currentBytes;
+    if (readBytes == 6) {
+      break;
+    }
+    usleep(usleepDelay);
+    if (usleepDelay < 200000) {
+      usleepDelay *= 4;
+    }
+  }
+  while (true) {
+    if (tmCountdown.hasTimedOut()) {
+      triggerEvent(MPSOC_READ_TIMEOUT, tmCountdown.getTimeoutMs());
+      return returnvalue::FAILED;
+    }
+    result = receive(tmBuf.data() + readBytes, fullPacketLen - readBytes, &currentBytes);
+    readBytes += currentBytes;
+    if (fullPacketLen == readBytes) {
+      break;
+    }
+    usleep(usleepDelay);
+    if (usleepDelay < 200000) {
+      usleepDelay *= 4;
+    }
+  }
+  // arrayprinter::print(tmBuf.data(), readBytes);
+  return result;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::handleFlashReadReply(std::ofstream& ofile,
+                                                              size_t expectedReadLen) {
+  ReturnValue_t result = checkReceivedTm();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  uint16_t apid = spReader.getApid();
+  if (apid != mpsoc::apid::TM_FLASH_READ_REPORT) {
+    triggerEvent(MPSOC_FLASH_READ_PACKET_ERROR, FlashReadErrorType::FLASH_READ_APID_ERROR);
+    sif::warning << "PLOC MPSoC Flash Read: Unexpected APID" << std::endl;
+    return result;
+  }
+  const uint8_t* packetData = spReader.getPacketData();
+  size_t deserDummy = spReader.getPacketDataLen() - mpsoc::CRC_SIZE;
+  uint32_t receivedReadLen = 0;
+  // I think this is buggy, weird stuff in the short name field.
+  //  std::string receivedShortName = std::string(reinterpret_cast<const char*>(packetData), 12);
+  //  if (receivedShortName != flashReadAndWrite.mpsocFile.substr(0, 11)) {
+  //    sif::warning << "PLOC MPSoC Flash Read: Missmatch between request file name and "
+  //                    "received file name"
+  //                 << std::endl;
+  //    triggerEvent(MPSOC_FLASH_READ_PACKET_ERROR, FlashReadErrorType::FLASH_READ_FILENAME_ERROR);
+  //    return returnvalue::FAILED;
+  //  }
+  packetData += 12;
+  result = SerializeAdapter::deSerialize(&receivedReadLen, &packetData, &deserDummy,
+                                         SerializeIF::Endianness::NETWORK);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  if (receivedReadLen != expectedReadLen) {
+    sif::warning << "PLOC MPSoC Flash Read: Missmatch between request read length and "
+                    "received read length"
+                 << std::endl;
+    triggerEvent(MPSOC_FLASH_READ_PACKET_ERROR, FlashReadErrorType::FLASH_READ_READLEN_ERROR);
+    return returnvalue::FAILED;
+  }
+  ofile.write(reinterpret_cast<const char*>(packetData), receivedReadLen);
+  return returnvalue::OK;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::fileCheck(std::string obcFile) {
+#ifdef XIPHOS_Q7S
+  ReturnValue_t result = FilesystemHelper::checkPath(obcFile);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+#elif defined(TE0720_1CFA)
+  if (not std::filesystem::exists(obcFile)) {
+    sif::warning << "PlocMPSoCHelper::startFlashWrite: File " << obcFile << "does not exist"
+                 << std::endl;
+    return returnvalue::FAILED;
+  }
+#endif
+  return returnvalue::OK;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::startFlashReadOrWriteBase(std::string obcFile,
+                                                                   std::string mpsocFile) {
+  ReturnValue_t result = fileCheck(obcFile);
+  if (result != returnvalue::OK) {
+    return result;
+  }
+
+  flashReadAndWrite.obcFile = std::move(obcFile);
+  flashReadAndWrite.mpsocFile = std::move(mpsocFile);
+  resetHelper();
+  return returnvalue::OK;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::checkReceivedTm() {
+  ReturnValue_t result = spReader.checkSize();
+  if (result != returnvalue::OK) {
+    sif::error << "PLOC MPSoC: Size check on received TM failed" << std::endl;
+    triggerEvent(MPSOC_TM_SIZE_ERROR);
+    return result;
+  }
+  spReader.checkCrc();
+  if (result != returnvalue::OK) {
+    sif::warning << "PLOC MPSoC: CRC check failed" << std::endl;
+    triggerEvent(MPSOC_TM_CRC_MISSMATCH, *sequenceCount);
+    return result;
+  }
+  uint16_t recvSeqCnt = spReader.getSequenceCount();
+  if (recvSeqCnt != *sequenceCount) {
+    triggerEvent(MPSOC_HELPER_SEQ_CNT_MISMATCH, *sequenceCount, recvSeqCnt);
+    *sequenceCount = recvSeqCnt;
+  }
+  // This sequence count ping pong does not make any sense but it is how the MPSoC expects it.
+  (*sequenceCount)++;
+  return returnvalue::OK;
+}
+
+ReturnValue_t PlocMpsocSpecialComHelper::receive(uint8_t* data, size_t requestBytes,
+                                                 size_t* readBytes) {
+  ReturnValue_t result = returnvalue::OK;
+  uint8_t* buffer = nullptr;
+  result = uartComIF->requestReceiveMessage(comCookie, requestBytes);
+  if (result != returnvalue::OK) {
+    sif::warning << "PlocMPSoCHelper::receive: Failed to request reply" << std::endl;
+    triggerEvent(MPSOC_HELPER_REQUESTING_REPLY_FAILED, result,
+                 static_cast<uint32_t>(static_cast<uint32_t>(internalState)));
+    return returnvalue::FAILED;
+  }
+  result = uartComIF->readReceivedMessage(comCookie, &buffer, readBytes);
+  if (result != returnvalue::OK) {
+    sif::warning << "PlocMPSoCHelper::receive: Failed to read received message" << std::endl;
+    triggerEvent(MPSOC_HELPER_READING_REPLY_FAILED, result, static_cast<uint32_t>(internalState));
+    return returnvalue::FAILED;
+  }
+  if (*readBytes > 0) {
+    std::memcpy(data, buffer, *readBytes);
+  }
+  return result;
+}

linux/payload/PlocMpsocSpecialComHelper.h

@@ -1,11 +1,12 @@
 #ifndef BSP_Q7S_DEVICES_PLOCMPSOCHELPER_H_
 #define BSP_Q7S_DEVICES_PLOCMPSOCHELPER_H_
 
-#include <linux/payload/plocMpscoDefs.h>
+#include <linux/payload/plocMpsocHelpers.h>
 #include <mission/utility/trace.h>
 
 #include <string>
 
+#include "OBSWConfig.h"
 #include "fsfw/devicehandlers/CookieIF.h"
 #include "fsfw/objectmanager/SystemObject.h"
 #include "fsfw/osal/linux/BinarySemaphore.h"
@@ -22,14 +23,14 @@
  *          MPSoC and OBC.
  * @author  J. Meier
  */
-class PlocMPSoCHelper : public SystemObject, public ExecutableObjectIF {
+class PlocMpsocSpecialComHelper : public SystemObject, public ExecutableObjectIF {
  public:
   static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::PLOC_MPSOC_HELPER;
 
   //! [EXPORT] : [COMMENT] Flash write fails
   static const Event MPSOC_FLASH_WRITE_FAILED = MAKE_EVENT(0, severity::LOW);
   //! [EXPORT] : [COMMENT] Flash write successful
-  static const Event MPSOC_FLASH_WRITE_SUCCESSFUL = MAKE_EVENT(1, severity::LOW);
+  static const Event MPSOC_FLASH_WRITE_SUCCESSFUL = MAKE_EVENT(1, severity::INFO);
   //! [EXPORT] : [COMMENT] Communication interface returned failure when trying to send the command
   //! to the MPSoC
   //! P1: Return value returned by the communication interface sendMessage function
@@ -71,9 +72,19 @@ class PlocMPSoCHelper : public SystemObject, public ExecutableObjectIF {
   static const Event MPSOC_HELPER_SEQ_CNT_MISMATCH = MAKE_EVENT(11, severity::LOW);
   static const Event MPSOC_TM_SIZE_ERROR = MAKE_EVENT(12, severity::LOW);
   static const Event MPSOC_TM_CRC_MISSMATCH = MAKE_EVENT(13, severity::LOW);
+  static const Event MPSOC_FLASH_READ_PACKET_ERROR = MAKE_EVENT(14, severity::LOW);
+  static const Event MPSOC_FLASH_READ_FAILED = MAKE_EVENT(15, severity::LOW);
+  static const Event MPSOC_FLASH_READ_SUCCESSFUL = MAKE_EVENT(16, severity::INFO);
+  static const Event MPSOC_READ_TIMEOUT = MAKE_EVENT(17, severity::LOW);
 
-  PlocMPSoCHelper(object_id_t objectId);
-  virtual ~PlocMPSoCHelper();
+  enum FlashReadErrorType : uint32_t {
+    FLASH_READ_APID_ERROR = 0,
+    FLASH_READ_FILENAME_ERROR = 1,
+    FLASH_READ_READLEN_ERROR = 2
+  };
+
+  PlocMpsocSpecialComHelper(object_id_t objectId);
+  virtual ~PlocMpsocSpecialComHelper();
 
   ReturnValue_t initialize() override;
   ReturnValue_t performOperation(uint8_t operationCode = 0) override;
@@ -90,6 +101,14 @@ class PlocMPSoCHelper : public SystemObject, public ExecutableObjectIF {
    * @return  returnvalue::OK if successful, otherwise error return value
    */
   ReturnValue_t startFlashWrite(std::string obcFile, std::string mpsocFile);
+  /**
+   *
+   * @param obcFile Full target file name on OBC
+   * @param mpsocFile The file on the MPSoC which should be copied ot the OBC
+   * @param readFileSize The size of the file on the MPSoC.
+   * @return
+   */
+  ReturnValue_t startFlashRead(std::string obcFile, std::string mpsocFile, size_t readFileSize);
 
   /**
    * @brief   Can be used to interrupt a running data transfer.
@@ -104,20 +123,25 @@ class PlocMPSoCHelper : public SystemObject, public ExecutableObjectIF {
  private:
   static const uint8_t INTERFACE_ID = CLASS_ID::PLOC_MPSOC_HELPER;
 
-  //! [EXPORT] : [COMMENT] File accidentally close
-  static const ReturnValue_t FILE_CLOSED_ACCIDENTALLY = MAKE_RETURN_CODE(0xA0);
+  //! [EXPORT] : [COMMENT] File error occured for file transfers from OBC to the MPSoC.
+  static const ReturnValue_t FILE_WRITE_ERROR = MAKE_RETURN_CODE(0xA0);
+  //! [EXPORT] : [COMMENT] File error occured for file transfers from MPSoC to OBC.
+  static const ReturnValue_t FILE_READ_ERROR = MAKE_RETURN_CODE(0xA1);
 
   // Maximum number of times the communication interface retries polling data from the reply
   // buffer
   static const int RETRIES = 10000;
 
-  struct FlashWrite {
+  struct FlashInfo {
     std::string obcFile;
     std::string mpsocFile;
   };
 
-  struct FlashWrite flashWrite;
+  struct FlashRead : public FlashInfo {
+    size_t totalReadSize = 0;
+  };
 
+  struct FlashRead flashReadAndWrite;
 #if OBSW_THREAD_TRACING == 1
   uint32_t opCounter = 0;
 #endif
@@ -134,7 +158,10 @@ class PlocMPSoCHelper : public SystemObject, public ExecutableObjectIF {
   SpacePacketCreator creator;
   ploc::SpTcParams spParams = ploc::SpTcParams(creator);
 
-  std::array<uint8_t, mpsoc::MAX_REPLY_SIZE> tmBuf;
+  Countdown tmCountdown = Countdown(5000);
+
+  std::array<uint8_t, mpsoc::SP_MAX_DATA_SIZE> fileBuf{};
+  std::array<uint8_t, mpsoc::MAX_REPLY_SIZE> tmBuf{};
 
   bool terminate = false;
 
@@ -147,20 +174,27 @@ class PlocMPSoCHelper : public SystemObject, public ExecutableObjectIF {
   CookieIF* comCookie = nullptr;
   // Sequence count, must be set by Ploc MPSoC Handler
   SourceSequenceCounter* sequenceCount = nullptr;
+  ploc::SpTmReader spReader;
 
-  ReturnValue_t resetHelper();
+  void resetHelper();
   ReturnValue_t performFlashWrite();
-  ReturnValue_t flashfopen();
+  ReturnValue_t performFlashRead();
+  ReturnValue_t flashfopen(uint8_t accessMode);
   ReturnValue_t flashfclose();
-  ReturnValue_t handlePacketTransmission(ploc::SpTcBase& tc);
+  ReturnValue_t handlePacketTransmissionNoReply(ploc::SpTcBase& tc);
+  ReturnValue_t handlePacketTransmissionFlashRead(mpsoc::TcFlashRead& tc, std::ofstream& ofile,
+                                                  size_t expectedReadLen);
+  ReturnValue_t handleFlashReadReply(std::ofstream& ofile, size_t expectedReadLen);
   ReturnValue_t sendCommand(ploc::SpTcBase& tc);
-  ReturnValue_t receive(uint8_t* data, size_t* readBytes, size_t requestBytes);
+  ReturnValue_t receive(uint8_t* data, size_t requestBytes, size_t* readBytes);
   ReturnValue_t handleAck();
   ReturnValue_t handleExe();
-  void handleAckApidFailure(uint16_t apid);
-  void handleExeApidFailure(uint16_t apid);
-  ReturnValue_t handleTmReception(size_t remainingBytes);
-  ReturnValue_t checkReceivedTm(ploc::SpTmReader& reader);
+  ReturnValue_t startFlashReadOrWriteBase(std::string obcFile, std::string mpsocFile);
+  ReturnValue_t fileCheck(std::string obcFile);
+  void handleAckApidFailure(const ploc::SpTmReader& reader);
+  void handleExeFailure();
+  ReturnValue_t handleTmReception();
+  ReturnValue_t checkReceivedTm();
 };
 
 #endif /* BSP_Q7S_DEVICES_PLOCMPSOCHELPER_H_ */

linux/payload/PlocSupervisorHandler.cpp

@@ -151,7 +151,7 @@ void PlocSupervisorHandler::doStartUp() {
       }
     }
   }
-  if (startupState == StartupState::SET_TIME_EXECUTING) {
+  if (startupState == StartupState::TIME_WAS_SET) {
     startupState = StartupState::ON;
   }
   if (startupState == StartupState::ON) {
@@ -176,7 +176,7 @@ ReturnValue_t PlocSupervisorHandler::buildNormalDeviceCommand(DeviceCommandId_t*
 ReturnValue_t PlocSupervisorHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
   if (startupState == StartupState::SET_TIME) {
     *id = supv::SET_TIME_REF;
-    startupState = StartupState::SET_TIME_EXECUTING;
+    startupState = StartupState::WAIT_FOR_TIME_REPLY;
     return buildCommandFromCommand(*id, nullptr, 0);
   }
   return NOTHING_TO_SEND;
@@ -1909,6 +1909,10 @@ ReturnValue_t PlocSupervisorHandler::handleExecutionSuccessReport(ExecutionRepor
     case supv::SET_TIME_REF: {
       // We could only allow proper bootup when the time was set successfully, but
       // this makes debugging difficult.
+
+      if (startupState == StartupState::WAIT_FOR_TIME_REPLY) {
+        startupState = StartupState::TIME_WAS_SET;
+      }
       break;
     }
     default:

linux/payload/PlocSupervisorHandler.h

@@ -99,7 +99,14 @@ class PlocSupervisorHandler : public DeviceHandlerBase {
   static const uint32_t MRAM_DUMP_TIMEOUT = 60000;
   // 4 s
   static const uint32_t BOOT_TIMEOUT = 4000;
-  enum class StartupState : uint8_t { OFF, BOOTING, SET_TIME, SET_TIME_EXECUTING, ON };
+  enum class StartupState : uint8_t {
+    OFF,
+    BOOTING,
+    SET_TIME,
+    WAIT_FOR_TIME_REPLY,
+    TIME_WAS_SET,
+    ON
+  };
 
   static constexpr bool SET_TIME_DURING_BOOT = true;
 

linux/payload/plocMpsocHelpers.cpp

@@ -0,0 +1,95 @@
+#include "plocMpsocHelpers.h"
+
+uint16_t mpsoc::getStatusFromRawData(const uint8_t* data) {
+  return (*(data + STATUS_OFFSET) << 8) | *(data + STATUS_OFFSET + 1);
+}
+std::string mpsoc::getStatusString(uint16_t status) {
+  switch (status) {
+    case (mpsoc::status_code::UNKNOWN_APID): {
+      return "Unknown APID";
+      break;
+    }
+    case (mpsoc::status_code::INCORRECT_LENGTH): {
+      return "Incorrect length";
+      break;
+    }
+    case (mpsoc::status_code::INCORRECT_CRC): {
+      return "Incorrect crc";
+      break;
+    }
+    case (mpsoc::status_code::INCORRECT_PKT_SEQ_CNT): {
+      return "Incorrect packet sequence count";
+      break;
+    }
+    case (mpsoc::status_code::TC_NOT_ALLOWED_IN_MODE): {
+      return "TC not allowed in this mode";
+      break;
+    }
+    case (mpsoc::status_code::TC_EXEUTION_DISABLED): {
+      return "TC execution disabled";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_MOUNT_FAILED): {
+      return "Flash mount failed";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_FILE_ALREADY_OPEN): {
+      return "Flash file already open";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_FILE_ALREADY_CLOSED): {
+      return "Flash file already closed";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_FILE_OPEN_FAILED): {
+      return "Flash file open failed";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_FILE_NOT_OPEN): {
+      return "Flash file not open";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_UNMOUNT_FAILED): {
+      return "Flash unmount failed";
+      break;
+    }
+    case (mpsoc::status_code::HEAP_ALLOCATION_FAILED): {
+      return "Heap allocation failed";
+      break;
+    }
+    case (mpsoc::status_code::INVALID_PARAMETER): {
+      return "Invalid parameter";
+      break;
+    }
+    case (mpsoc::status_code::NOT_INITIALIZED): {
+      return "Not initialized";
+      break;
+    }
+    case (mpsoc::status_code::REBOOT_IMMINENT): {
+      return "Reboot imminent";
+      break;
+    }
+    case (mpsoc::status_code::CORRUPT_DATA): {
+      return "Corrupt data";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_CORRECTABLE_MISMATCH): {
+      return "Flash correctable mismatch";
+      break;
+    }
+    case (mpsoc::status_code::FLASH_UNCORRECTABLE_MISMATCH): {
+      return "Flash uncorrectable mismatch";
+      break;
+    }
+    case (mpsoc::status_code::DEFAULT_ERROR_CODE): {
+      return "Default error code";
+      break;
+    }
+    default:
+      std::stringstream ss;
+      ss << "0x" << std::hex << status;
+      return ss.str().c_str();
+      break;
+  }
+  return "";
+}

linux/payload/plocMpsocHelpers.h

@@ -1,6 +1,7 @@
 #ifndef MISSION_DEVICES_DEVICEDEFINITIONS_PLOCMPSOCDEFINITIONS_H_
 #define MISSION_DEVICES_DEVICEDEFINITIONS_PLOCMPSOCDEFINITIONS_H_
 
+#include <fsfw/datapoollocal/StaticLocalDataSet.h>
 #include <fsfw/devicehandlers/DeviceHandlerIF.h>
 #include <linux/payload/mpsocRetvals.h>
 #include <mission/payload/plocSpBase.h>
@@ -12,6 +13,61 @@
 
 namespace mpsoc {
 
+enum FileAccessModes : uint8_t {
+  // Opens a file, fails if the file does not exist.
+  OPEN_EXISTING = 0x00,
+  READ = 0x01,
+  WRITE = 0x02,
+  // Creates a new file, fails if it already exists.
+  CREATE_NEW = 0x04,
+  // Creates a new file, existing file is truncated and overwritten.
+  CREATE_ALWAYS = 0x08,
+  // Opens the file if it is existing. If not, a new file is created.
+  OPEN_ALWAYS = 0x10,
+  OPEN_APPEND = 0x30
+};
+
+static constexpr uint32_t HK_SET_ID = 0;
+
+namespace poolid {
+enum {
+  STATUS = 0,
+  MODE = 1,
+  DOWNLINK_PWR_ON = 2,
+  DOWNLINK_REPLY_ACTIIVE = 3,
+  DOWNLINK_JESD_SYNC_STATUS = 4,
+  DOWNLINK_DAC_STATUS = 5,
+  CAM_STATUS = 6,
+  CAM_SDI_STATUS = 7,
+  CAM_FPGA_TEMP = 8,
+  CAM_SOC_TEMP = 9,
+  SYSMON_TEMP = 10,
+  SYSMON_VCCINT = 11,
+  SYSMON_VCCAUX = 12,
+  SYSMON_VCCBRAM = 13,
+  SYSMON_VCCPAUX = 14,
+  SYSMON_VCCPINT = 15,
+  SYSMON_VCCPDRO = 16,
+  SYSMON_MB12V = 17,
+  SYSMON_MB3V3 = 18,
+  SYSMON_MB1V8 = 19,
+  SYSMON_VCC12V = 20,
+  SYSMON_VCC5V = 21,
+  SYSMON_VCC3V3 = 22,
+  SYSMON_VCC3V3VA = 23,
+  SYSMON_VCC2V5DDR = 24,
+  SYSMON_VCC1V2DDR = 25,
+  SYSMON_VCC0V9 = 26,
+  SYSMON_VCC0V6VTT = 27,
+  SYSMON_SAFE_COTS_CUR = 28,
+  SYSMON_NVM4_XO_CUR = 29,
+  SEM_UNCORRECTABLE_ERRS = 30,
+  SEM_CORRECTABLE_ERRS = 31,
+  SEM_STATUS = 32,
+  REBOOT_MPSOC_REQUIRED = 33,
+};
+}
+
 static const DeviceCommandId_t NONE = 0;
 static const DeviceCommandId_t TC_MEM_WRITE = 1;
 static const DeviceCommandId_t TC_MEM_READ = 2;
@@ -20,7 +76,7 @@ static const DeviceCommandId_t EXE_REPORT = 5;
 static const DeviceCommandId_t TM_MEMORY_READ_REPORT = 6;
 static const DeviceCommandId_t TC_FLASHFOPEN = 7;
 static const DeviceCommandId_t TC_FLASHFCLOSE = 8;
-static const DeviceCommandId_t TC_FLASHWRITE = 9;
+static const DeviceCommandId_t TC_FLASH_WRITE_FULL_FILE = 9;
 static const DeviceCommandId_t TC_FLASHDELETE = 10;
 static const DeviceCommandId_t TC_REPLAY_START = 11;
 static const DeviceCommandId_t TC_REPLAY_STOP = 12;
@@ -37,6 +93,11 @@ static const DeviceCommandId_t TC_CAM_TAKE_PIC = 22;
 static const DeviceCommandId_t TC_SIMPLEX_SEND_FILE = 23;
 static const DeviceCommandId_t TC_DOWNLINK_DATA_MODULATE = 24;
 static const DeviceCommandId_t TC_MODE_SNAPSHOT = 25;
+static const DeviceCommandId_t TC_GET_HK_REPORT = 26;
+static const DeviceCommandId_t TM_GET_HK_REPORT = 27;
+static const DeviceCommandId_t TC_FLASH_GET_DIRECTORY_CONTENT = 28;
+static const DeviceCommandId_t TM_FLASH_DIRECTORY_CONTENT = 29;
+static constexpr DeviceCommandId_t TC_FLASH_READ_FULL_FILE = 30;
 
 // Will reset the sequence count of the OBSW
 static const DeviceCommandId_t OBSW_RESET_SEQ_COUNT = 50;
@@ -45,6 +106,7 @@ static const uint16_t SIZE_ACK_REPORT = 14;
 static const uint16_t SIZE_EXE_REPORT = 14;
 static const uint16_t SIZE_TM_MEM_READ_REPORT = 18;
 static const uint16_t SIZE_TM_CAM_CMD_RPT = 18;
+static constexpr size_t SIZE_TM_HK_REPORT = 369;
 
 /**
  * SpacePacket apids of PLOC telecommands and telemetry.
@@ -57,23 +119,32 @@ static const uint16_t TC_DOWNLINK_PWR_ON = 0x113;
 static const uint16_t TC_MEM_WRITE = 0x114;
 static const uint16_t TC_MEM_READ = 0x115;
 static const uint16_t TC_CAM_TAKE_PIC = 0x116;
-static const uint16_t TC_FLASHWRITE = 0x117;
+static constexpr uint16_t TC_FLASHWRITE = 0x117;
+static constexpr uint16_t TC_FLASHREAD = 0x118;
 static const uint16_t TC_FLASHFOPEN = 0x119;
 static const uint16_t TC_FLASHFCLOSE = 0x11A;
+static constexpr uint16_t TC_FLASH_GET_DIRECTORY_CONTENT = 0x11B;
 static const uint16_t TC_FLASHDELETE = 0x11C;
+static constexpr uint16_t TC_FLASH_CREATE_DIR = 0x11D;
 static const uint16_t TC_MODE_IDLE = 0x11E;
 static const uint16_t TC_MODE_REPLAY = 0x11F;
 static const uint16_t TC_MODE_SNAPSHOT = 0x120;
 static const uint16_t TC_DOWNLINK_DATA_MODULATE = 0x121;
+static constexpr uint16_t TC_HK_GET_REPORT = 0x123;
 static const uint16_t TC_DOWNLINK_PWR_OFF = 0x124;
 static const uint16_t TC_CAM_CMD_SEND = 0x12C;
+static constexpr uint16_t TC_FLASH_COPY_FILE = 0x12E;
 static const uint16_t TC_SIMPLEX_SEND_FILE = 0x130;
-static const uint16_t TM_MEMORY_READ_REPORT = 0x404;
+
 static const uint16_t ACK_SUCCESS = 0x400;
 static const uint16_t ACK_FAILURE = 0x401;
 static const uint16_t EXE_SUCCESS = 0x402;
 static const uint16_t EXE_FAILURE = 0x403;
+static const uint16_t TM_MEMORY_READ_REPORT = 0x404;
+static const uint16_t TM_FLASH_READ_REPORT = 0x405;
+static constexpr uint16_t TM_FLASH_DIRECTORY_CONTENT = 0x406;
 static const uint16_t TM_CAM_CMD_RPT = 0x407;
+static constexpr uint16_t TM_HK_GET_REPORT = 0x408;
 }  // namespace apid
 
 /** Offset from first byte in space packet to first byte of data field */
@@ -83,6 +154,8 @@ static const char NULL_TERMINATOR = '\0';
 static const uint8_t MIN_SPACE_PACKET_LENGTH = 7;
 static const uint8_t SPACE_PACKET_HEADER_SIZE = 6;
 
+static const uint8_t STATUS_OFFSET = 10;
+
 static constexpr size_t CRC_SIZE = 2;
 
 /**
@@ -106,9 +179,15 @@ static const uint16_t LENGTH_TC_MEM_READ = 8;
  * at sheet README
  */
 static constexpr size_t SP_MAX_SIZE = 1024;
-static const size_t MAX_REPLY_SIZE = SP_MAX_SIZE * 3;
-static const size_t MAX_COMMAND_SIZE = SP_MAX_SIZE;
-static const size_t MAX_DATA_SIZE = 1016;
+static constexpr size_t MAX_REPLY_SIZE = SP_MAX_SIZE * 3;
+static constexpr size_t MAX_COMMAND_SIZE = SP_MAX_SIZE;
+// 1016 bytes.
+static constexpr size_t SP_MAX_DATA_SIZE = SP_MAX_SIZE - ccsds::HEADER_LEN - CRC_SIZE;
+static constexpr size_t FLASH_READ_MIN_OVERHEAD = 16;
+// 1000 bytes.
+static const size_t MAX_FLASH_READ_DATA_SIZE = SP_MAX_DATA_SIZE - FLASH_READ_MIN_OVERHEAD;
+// 1012 bytes, 4 bytes for the write length.
+static constexpr size_t MAX_FLASH_WRITE_DATA_SIZE = SP_MAX_DATA_SIZE - sizeof(uint32_t);
 
 /**
  * The replay write sequence command has a maximum delay for the execution report which amounts to
@@ -131,7 +210,7 @@ static const uint16_t TC_EXEUTION_DISABLED = 0x5E2;
 static const uint16_t FLASH_MOUNT_FAILED = 0x5E3;
 static const uint16_t FLASH_FILE_ALREADY_CLOSED = 0x5E4;
 static const uint16_t FLASH_FILE_OPEN_FAILED = 0x5E5;
-static const uint16_t FLASH_FILE_ALREDY_OPEN = 0x5E6;
+static const uint16_t FLASH_FILE_ALREADY_OPEN = 0x5E6;
 static const uint16_t FLASH_FILE_NOT_OPEN = 0x5E7;
 static const uint16_t FLASH_UNMOUNT_FAILED = 0x5E8;
 static const uint16_t HEAP_ALLOCATION_FAILED = 0x5E9;
@@ -156,7 +235,7 @@ class TcBase : public ploc::SpTcBase, public MPSoCReturnValuesIF {
   virtual ~TcBase() = default;
 
   // Initial length field of space packet. Will always be updated when packet is created.
-  static const uint16_t INIT_LENGTH = 2;
+  static const uint16_t INIT_LENGTH = CRC_SIZE;
 
   /**
    * @brief    Constructor
@@ -166,47 +245,23 @@ class TcBase : public ploc::SpTcBase, public MPSoCReturnValuesIF {
    */
   TcBase(ploc::SpTcParams params, uint16_t apid, uint16_t sequenceCount)
       : ploc::SpTcBase(params, apid, 0, sequenceCount) {
+    payloadStart = spParams.buf + ccsds::HEADER_LEN;
     spParams.setFullPayloadLen(INIT_LENGTH);
   }
 
-  ReturnValue_t buildPacket() { return buildPacket(nullptr, 0); }
-
   /**
-   * @brief   Function to initialize the space packet
-   *
-   * @param commandData       Pointer to command specific data
-   * @param commandDataLen    Length of command data
-   *
+   * @brief   Function to finsh and write the space packet. It is expected that the user has
+   * set the payload fields in the child class*
    * @return  returnvalue::OK if packet creation was successful, otherwise error return value
    */
-  ReturnValue_t buildPacket(const uint8_t* commandData, size_t commandDataLen) {
-    payloadStart = spParams.buf + ccsds::HEADER_LEN;
-    ReturnValue_t res;
-    if (commandData != nullptr and commandDataLen > 0) {
-      res = initPacket(commandData, commandDataLen);
-      if (res != returnvalue::OK) {
-        return res;
-      }
-    }
-
+  ReturnValue_t finishPacket() {
     updateSpFields();
-    res = checkSizeAndSerializeHeader();
+    ReturnValue_t res = checkSizeAndSerializeHeader();
     if (res != returnvalue::OK) {
       return res;
     }
     return calcAndSetCrc();
   }
-
- protected:
-  /**
-   * @brief   Must be overwritten by the child class to define the command specific parameters
-   *
-   * @param commandData       Pointer to received command data
-   * @param commandDataLen    Length of received command data
-   */
-  virtual ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) {
-    return returnvalue::OK;
-  }
 };
 
 /**
@@ -224,8 +279,7 @@ class TcMemRead : public TcBase {
 
   uint16_t getMemLen() const { return memLen; }
 
- protected:
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     ReturnValue_t result = returnvalue::OK;
     result = lengthCheck(commandDataLen);
     if (result != returnvalue::OK) {
@@ -271,8 +325,7 @@ class TcMemWrite : public TcBase {
   TcMemWrite(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_MEM_WRITE, sequenceCount) {}
 
- protected:
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     ReturnValue_t result = returnvalue::OK;
     result = lengthCheck(commandDataLen);
     if (result != returnvalue::OK) {
@@ -314,72 +367,58 @@ class TcMemWrite : public TcBase {
 /**
  * @brief   Class to help creation of flash fopen command.
  */
-class FlashFopen : public ploc::SpTcBase {
+class FlashFopen : public TcBase {
  public:
   FlashFopen(ploc::SpTcParams params, uint16_t sequenceCount)
-      : ploc::SpTcBase(params, apid::TC_FLASHFOPEN, sequenceCount) {}
+      : TcBase(params, apid::TC_FLASHFOPEN, sequenceCount) {}
 
-  static const char APPEND = 'a';
-  static const char WRITE = 'w';
-  static const char READ = 'r';
-
-  ReturnValue_t createPacket(std::string filename, char accessMode_) {
-    accessMode = accessMode_;
+  ReturnValue_t setPayload(std::string filename, uint8_t mode) {
+    accessMode = mode;
     size_t nameSize = filename.size();
-    spParams.setFullPayloadLen(nameSize + sizeof(NULL_TERMINATOR) + sizeof(accessMode) + CRC_SIZE);
+    spParams.setFullPayloadLen(256 + sizeof(uint8_t) + CRC_SIZE);
     ReturnValue_t result = checkPayloadLen();
     if (result != returnvalue::OK) {
       return result;
     }
     std::memcpy(payloadStart, filename.c_str(), nameSize);
-    *(spParams.buf + nameSize) = NULL_TERMINATOR;
-    std::memcpy(payloadStart + nameSize + sizeof(NULL_TERMINATOR), &accessMode, sizeof(accessMode));
-    updateSpFields();
-    return calcAndSetCrc();
+    // payloadStart[nameSize] = NULL_TERMINATOR;
+    std::memset(payloadStart + nameSize, 0, 256 - nameSize);
+    // payloadStart[255] = NULL_TERMINATOR;
+    payloadStart[256] = accessMode;
+    return returnvalue::OK;
   }
 
  private:
-  char accessMode = APPEND;
+  uint8_t accessMode = FileAccessModes::OPEN_EXISTING;
 };
 
 /**
  * @brief   Class to help creation of flash fclose command.
  */
-class FlashFclose : public ploc::SpTcBase {
+class FlashFclose : public TcBase {
  public:
   FlashFclose(ploc::SpTcParams params, uint16_t sequenceCount)
-      : ploc::SpTcBase(params, apid::TC_FLASHFCLOSE, sequenceCount) {}
-
-  ReturnValue_t createPacket(std::string filename) {
-    size_t nameSize = filename.size();
-    spParams.setFullPayloadLen(nameSize + sizeof(NULL_TERMINATOR) + CRC_SIZE);
-    ReturnValue_t result = checkPayloadLen();
-    if (result != returnvalue::OK) {
-      return result;
-    }
-    std::memcpy(payloadStart, filename.c_str(), nameSize);
-    *(payloadStart + nameSize) = NULL_TERMINATOR;
-    return calcAndSetCrc();
+      : TcBase(params, apid::TC_FLASHFCLOSE, sequenceCount) {
+    spParams.setFullPayloadLen(CRC_SIZE);
   }
 };
 
 /**
  * @brief   Class to build flash write space packet.
  */
-class TcFlashWrite : public ploc::SpTcBase {
+class TcFlashWrite : public TcBase {
  public:
   TcFlashWrite(ploc::SpTcParams params, uint16_t sequenceCount)
-      : ploc::SpTcBase(params, apid::TC_FLASHWRITE, sequenceCount) {}
+      : TcBase(params, apid::TC_FLASHWRITE, sequenceCount) {}
 
-  ReturnValue_t buildPacket(const uint8_t* writeData, uint32_t writeLen_) {
-    ReturnValue_t result = returnvalue::OK;
+  ReturnValue_t setPayload(const uint8_t* writeData, uint32_t writeLen_) {
     writeLen = writeLen_;
-    if (writeLen > MAX_DATA_SIZE) {
-      sif::debug << "FlashWrite::createPacket: Command data too big" << std::endl;
+    if (writeLen > MAX_FLASH_WRITE_DATA_SIZE) {
+      sif::error << "TcFlashWrite: Command data too big" << std::endl;
       return returnvalue::FAILED;
     }
-    spParams.setFullPayloadLen(static_cast<uint16_t>(writeLen) + 4 + CRC_SIZE);
-    result = checkPayloadLen();
+    spParams.setFullPayloadLen(sizeof(uint32_t) + static_cast<uint16_t>(writeLen) + CRC_SIZE);
+    ReturnValue_t result = checkPayloadLen();
     if (result != returnvalue::OK) {
       return result;
     }
@@ -389,11 +428,11 @@ class TcFlashWrite : public ploc::SpTcBase {
     if (result != returnvalue::OK) {
       return result;
     }
-    std::memcpy(payloadStart + sizeof(writeLen), writeData, writeLen);
+    std::memcpy(payloadStart + sizeof(uint32_t), writeData, writeLen);
     updateSpFields();
-    auto res = checkSizeAndSerializeHeader();
-    if (res != returnvalue::OK) {
-      return res;
+    result = checkSizeAndSerializeHeader();
+    if (result != returnvalue::OK) {
+      return result;
     }
     return calcAndSetCrc();
   }
@@ -402,15 +441,52 @@ class TcFlashWrite : public ploc::SpTcBase {
   uint32_t writeLen = 0;
 };
 
+class TcFlashRead : public TcBase {
+ public:
+  TcFlashRead(ploc::SpTcParams params, uint16_t sequenceCount)
+      : TcBase(params, apid::TC_FLASHREAD, sequenceCount) {}
+
+  ReturnValue_t setPayload(uint32_t readLen) {
+    if (readLen > MAX_FLASH_READ_DATA_SIZE) {
+      sif::error << "TcFlashRead: Read length " << readLen << " too large" << std::endl;
+      return returnvalue::FAILED;
+    }
+    spParams.setFullPayloadLen(sizeof(uint32_t) + CRC_SIZE);
+    ReturnValue_t result = checkPayloadLen();
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    size_t serializedSize = ccsds::HEADER_LEN;
+    result = SerializeAdapter::serialize(&readLen, payloadStart, &serializedSize, spParams.maxSize,
+                                         SerializeIF::Endianness::NETWORK);
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    updateSpFields();
+    result = checkSizeAndSerializeHeader();
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    result = calcAndSetCrc();
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    readSize = readLen;
+    return result;
+  }
+
+  uint32_t readSize = 0;
+};
+
 /**
  * @brief   Class to help creation of flash delete command.
  */
-class TcFlashDelete : public ploc::SpTcBase {
+class TcFlashDelete : public TcBase {
  public:
   TcFlashDelete(ploc::SpTcParams params, uint16_t sequenceCount)
-      : ploc::SpTcBase(params, apid::TC_FLASHDELETE, sequenceCount) {}
+      : TcBase(params, apid::TC_FLASHDELETE, sequenceCount) {}
 
-  ReturnValue_t buildPacket(std::string filename) {
+  ReturnValue_t setPayload(std::string filename) {
     size_t nameSize = filename.size();
     spParams.setFullPayloadLen(nameSize + sizeof(NULL_TERMINATOR) + CRC_SIZE);
     auto res = checkPayloadLen();
@@ -449,8 +525,7 @@ class TcReplayStart : public TcBase {
   TcReplayStart(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_REPLAY_START, sequenceCount) {}
 
- protected:
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     ReturnValue_t result = returnvalue::OK;
     spParams.setFullPayloadLen(commandDataLen + CRC_SIZE);
     result = lengthCheck(commandDataLen);
@@ -498,8 +573,7 @@ class TcDownlinkPwrOn : public TcBase {
   TcDownlinkPwrOn(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_DOWNLINK_PWR_ON, sequenceCount) {}
 
- protected:
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     ReturnValue_t result = returnvalue::OK;
     result = lengthCheck(commandDataLen);
     if (result != returnvalue::OK) {
@@ -561,6 +635,30 @@ class TcDownlinkPwrOn : public TcBase {
   }
 };
 
+class TcGetHkReport : public TcBase {
+ public:
+  TcGetHkReport(ploc::SpTcParams params, uint16_t sequenceCount)
+      : TcBase(params, apid::TC_HK_GET_REPORT, sequenceCount) {}
+};
+
+class TcGetDirContent : public TcBase {
+ public:
+  TcGetDirContent(ploc::SpTcParams params, uint16_t sequenceCount)
+      : TcBase(params, apid::TC_FLASH_GET_DIRECTORY_CONTENT, sequenceCount) {}
+
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
+    ReturnValue_t result = returnvalue::OK;
+    // Yeah it needs to be 256.. even if the path is shorter.
+    spParams.setFullPayloadLen(256 + CRC_SIZE);
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    std::memcpy(payloadStart, commandData, commandDataLen);
+    payloadStart[255] = '\0';
+    return result;
+  }
+};
+
 /**
  * @brief   Class to build replay stop space packet.
  */
@@ -581,8 +679,7 @@ class TcReplayWriteSeq : public TcBase {
   TcReplayWriteSeq(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_REPLAY_WRITE_SEQUENCE, sequenceCount) {}
 
- protected:
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     ReturnValue_t result = returnvalue::OK;
     spParams.setFullPayloadLen(commandDataLen + sizeof(NULL_TERMINATOR) + CRC_SIZE);
     result = lengthCheck(commandDataLen);
@@ -611,36 +708,69 @@ class TcReplayWriteSeq : public TcBase {
 /**
  * @brief   Helps to extract the fields of the flash write command from the PUS packet.
  */
-class FlashWritePusCmd : public MPSoCReturnValuesIF {
+class FlashBasePusCmd : public MPSoCReturnValuesIF {
  public:
-  FlashWritePusCmd(){};
+  FlashBasePusCmd() = default;
+  virtual ~FlashBasePusCmd() = default;
 
-  ReturnValue_t extractFields(const uint8_t* commandData, size_t commandDataLen) {
+  virtual ReturnValue_t extractFields(const uint8_t* commandData, size_t commandDataLen) {
     if (commandDataLen > (config::MAX_PATH_SIZE + config::MAX_FILENAME_SIZE + MAX_FILENAME_SIZE)) {
       return INVALID_LENGTH;
     }
-    obcFile = std::string(reinterpret_cast<const char*>(commandData));
-    if (obcFile.size() > (config::MAX_PATH_SIZE + config::MAX_FILENAME_SIZE)) {
+    size_t fileLen = strnlen(reinterpret_cast<const char*>(commandData), commandDataLen);
+    if (fileLen > (config::MAX_PATH_SIZE + config::MAX_FILENAME_SIZE)) {
       return FILENAME_TOO_LONG;
     }
-    mpsocFile = std::string(
-        reinterpret_cast<const char*>(commandData + obcFile.size() + SIZE_NULL_TERMINATOR));
-    if (mpsocFile.size() > MAX_FILENAME_SIZE) {
+    obcFile = std::string(reinterpret_cast<const char*>(commandData), fileLen);
+    fileLen =
+        strnlen(reinterpret_cast<const char*>(commandData + obcFile.size() + SIZE_NULL_TERMINATOR),
+                commandDataLen - obcFile.size() - 1);
+    if (fileLen > MAX_FILENAME_SIZE) {
       return MPSOC_FILENAME_TOO_LONG;
     }
+    mpsocFile = std::string(
+        reinterpret_cast<const char*>(commandData + obcFile.size() + SIZE_NULL_TERMINATOR),
+        fileLen);
     return returnvalue::OK;
   }
 
-  std::string getObcFile() { return obcFile; }
+  const std::string& getObcFile() const { return obcFile; }
 
-  std::string getMPSoCFile() { return mpsocFile; }
+  const std::string& getMPSoCFile() const { return mpsocFile; }
+
+ protected:
+  size_t getParsedSize() const {
+    return getObcFile().size() + getMPSoCFile().size() + 2 * SIZE_NULL_TERMINATOR;
+  }
+  static const size_t SIZE_NULL_TERMINATOR = 1;
 
  private:
-  static const size_t SIZE_NULL_TERMINATOR = 1;
-  std::string obcFile = "";
-  std::string mpsocFile = "";
+  std::string obcFile;
+  std::string mpsocFile;
 };
 
+class FlashReadPusCmd : public FlashBasePusCmd {
+ public:
+  FlashReadPusCmd(){};
+
+  ReturnValue_t extractFields(const uint8_t* commandData, size_t commandDataLen) override {
+    ReturnValue_t result = FlashBasePusCmd::extractFields(commandData, commandDataLen);
+    if (result != returnvalue::OK) {
+      return result;
+    }
+    if (commandDataLen < (getParsedSize() + 4)) {
+      return returnvalue::FAILED;
+    }
+    size_t deserDummy = 4;
+    return SerializeAdapter::deSerialize(&readSize, commandData + getParsedSize(), &deserDummy,
+                                         SerializeIF::Endianness::NETWORK);
+  }
+
+  size_t getReadSize() const { return readSize; }
+
+ private:
+  size_t readSize = 0;
+};
 /**
  * @brief   Class to build replay stop space packet.
  */
@@ -676,7 +806,7 @@ class TcCamTakePic : public TcBase {
   TcCamTakePic(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_CAM_TAKE_PIC, sequenceCount) {}
 
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     if (commandDataLen > MAX_DATA_LENGTH) {
       return INVALID_LENGTH;
     }
@@ -705,7 +835,7 @@ class TcSimplexSendFile : public TcBase {
   TcSimplexSendFile(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_SIMPLEX_SEND_FILE, sequenceCount) {}
 
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     if (commandDataLen > MAX_DATA_LENGTH) {
       return INVALID_LENGTH;
     }
@@ -730,7 +860,7 @@ class TcDownlinkDataModulate : public TcBase {
   TcDownlinkDataModulate(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_DOWNLINK_DATA_MODULATE, sequenceCount) {}
 
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     if (commandDataLen > MAX_DATA_LENGTH) {
       return INVALID_LENGTH;
     }
@@ -748,8 +878,7 @@ class TcCamcmdSend : public TcBase {
   TcCamcmdSend(ploc::SpTcParams params, uint16_t sequenceCount)
       : TcBase(params, apid::TC_CAM_CMD_SEND, sequenceCount) {}
 
- protected:
-  ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) override {
+  ReturnValue_t setPayload(const uint8_t* commandData, size_t commandDataLen) {
     if (commandDataLen > MAX_DATA_LENGTH) {
       return INVALID_LENGTH;
     }
@@ -774,6 +903,69 @@ class TcCamcmdSend : public TcBase {
   static const uint8_t CARRIAGE_RETURN = 0xD;
 };
 
+class HkReport : public StaticLocalDataSet<36> {
+ public:
+  HkReport(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, HK_SET_ID) {}
+
+  HkReport(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, HK_SET_ID)) {}
+
+  lp_var_t<uint32_t> status = lp_var_t<uint32_t>(sid.objectId, mpsoc::poolid::STATUS, this);
+  lp_var_t<uint8_t> mode = lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::MODE, this);
+  lp_var_t<uint8_t> downlinkPwrOn =
+      lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::DOWNLINK_PWR_ON, this);
+  lp_var_t<uint8_t> downlinkReplyActive =
+      lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::DOWNLINK_REPLY_ACTIIVE, this);
+  lp_var_t<uint8_t> downlinkJesdSyncStatus =
+      lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::DOWNLINK_JESD_SYNC_STATUS, this);
+  lp_var_t<uint8_t> downlinkDacStatus =
+      lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::DOWNLINK_DAC_STATUS, this);
+  lp_var_t<uint8_t> camStatus = lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::CAM_STATUS, this);
+  lp_var_t<uint8_t> camSdiStatus =
+      lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::CAM_SDI_STATUS, this);
+  lp_var_t<float> camFpgaTemp = lp_var_t<float>(sid.objectId, mpsoc::poolid::CAM_FPGA_TEMP, this);
+  lp_var_t<float> camSocTemp = lp_var_t<float>(sid.objectId, mpsoc::poolid::CAM_SOC_TEMP, this);
+  lp_var_t<float> sysmonTemp = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_TEMP, this);
+  lp_var_t<float> sysmonVccInt = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCCINT, this);
+  lp_var_t<float> sysmonVccAux = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCCAUX, this);
+  lp_var_t<float> sysmonVccBram =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCCBRAM, this);
+  lp_var_t<float> sysmonVccPaux =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCCPAUX, this);
+  lp_var_t<float> sysmonVccPint =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCCPINT, this);
+  lp_var_t<float> sysmonVccPdro =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCCPDRO, this);
+  lp_var_t<float> sysmonMb12V = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_MB12V, this);
+  lp_var_t<float> sysmonMb3V3 = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_MB3V3, this);
+  lp_var_t<float> sysmonMb1V8 = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_MB1V8, this);
+  lp_var_t<float> sysmonVcc12V = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC12V, this);
+  lp_var_t<float> sysmonVcc5V = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC5V, this);
+  lp_var_t<float> sysmonVcc3V3 = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC3V3, this);
+  lp_var_t<float> sysmonVcc3V3VA =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC3V3VA, this);
+  lp_var_t<float> sysmonVcc2V5DDR =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC2V5DDR, this);
+  lp_var_t<float> sysmonVcc1V2DDR =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC1V2DDR, this);
+  lp_var_t<float> sysmonVcc0V9 = lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC0V9, this);
+  lp_var_t<float> sysmonVcc0V6VTT =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_VCC0V6VTT, this);
+  lp_var_t<float> sysmonSafeCotsCur =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_SAFE_COTS_CUR, this);
+  lp_var_t<float> sysmonNvm4XoCur =
+      lp_var_t<float>(sid.objectId, mpsoc::poolid::SYSMON_NVM4_XO_CUR, this);
+  lp_var_t<uint16_t> semUncorrectableErrs =
+      lp_var_t<uint16_t>(sid.objectId, mpsoc::poolid::SEM_UNCORRECTABLE_ERRS, this);
+  lp_var_t<uint16_t> semCorrectableErrs =
+      lp_var_t<uint16_t>(sid.objectId, mpsoc::poolid::SEM_CORRECTABLE_ERRS, this);
+  lp_var_t<uint8_t> semStatus = lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::SEM_STATUS, this);
+  lp_var_t<uint8_t> rebootMpsocRequired =
+      lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::REBOOT_MPSOC_REQUIRED, this);
+};
+
+uint16_t getStatusFromRawData(const uint8_t* data);
+std::string getStatusString(uint16_t status);
+
 }  // namespace mpsoc
 
 #endif /* MISSION_DEVICES_DEVICEDEFINITIONS_PLOCMPSOCDEFINITIONS_H_ */

misc/eclipse/.cproject

@@ -57,7 +57,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -119,7 +120,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -187,7 +189,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -255,7 +258,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em|cmake-build-debug-q7s|bsp_q7s|cmake-build-debug/_deps|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -418,7 +422,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="build-Debug-RPi/_deps/etl-src/uml|build-Debug-RPi/_deps/etl-src/test|build-Debug-RPi/_deps/etl-src/temp|build-Debug-RPi/_deps/etl-src/support|build-Debug-RPi/_deps/etl-src/subprojects|build-Debug-RPi/_deps/etl-src/scripts|build-Debug-RPi/_deps/etl-src/images|build-Debug-RPi/_deps/etl-src/examples|build-Debug-RPi/_deps/etl-src/cmake|build-Debug-RPi/_deps/etl-src/arduino|cmake-build-debug-q7s|cmake-build-debug|cmake-build-debug-q7s-em|cmake-build-release-q7s-em|bsp_hosted|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|build-Debug-RPi/_deps/etl-src/uml|build-Debug-RPi/_deps/etl-src/test|build-Debug-RPi/_deps/etl-src/temp|build-Debug-RPi/_deps/etl-src/support|build-Debug-RPi/_deps/etl-src/subprojects|build-Debug-RPi/_deps/etl-src/scripts|build-Debug-RPi/_deps/etl-src/images|build-Debug-RPi/_deps/etl-src/examples|build-Debug-RPi/_deps/etl-src/cmake|build-Debug-RPi/_deps/etl-src/arduino|cmake-build-debug-q7s|cmake-build-debug|cmake-build-debug-q7s-em|cmake-build-release-q7s-em|bsp_hosted|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -580,7 +585,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="build-Debug-RPi/_deps/etl-src/uml|build-Debug-RPi/_deps/etl-src/test|build-Debug-RPi/_deps/etl-src/temp|build-Debug-RPi/_deps/etl-src/support|build-Debug-RPi/_deps/etl-src/subprojects|build-Debug-RPi/_deps/etl-src/scripts|build-Debug-RPi/_deps/etl-src/images|build-Debug-RPi/_deps/etl-src/examples|build-Debug-RPi/_deps/etl-src/cmake|build-Debug-RPi/_deps/etl-src/arduino|cmake-build-debug-q7s|cmake-build-debug|cmake-build-debug-q7s-em|cmake-build-release-q7s-em|bsp_hosted|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|build-Debug-RPi/_deps/etl-src/uml|build-Debug-RPi/_deps/etl-src/test|build-Debug-RPi/_deps/etl-src/temp|build-Debug-RPi/_deps/etl-src/support|build-Debug-RPi/_deps/etl-src/subprojects|build-Debug-RPi/_deps/etl-src/scripts|build-Debug-RPi/_deps/etl-src/images|build-Debug-RPi/_deps/etl-src/examples|build-Debug-RPi/_deps/etl-src/cmake|build-Debug-RPi/_deps/etl-src/arduino|cmake-build-debug-q7s|cmake-build-debug|cmake-build-debug-q7s-em|cmake-build-release-q7s-em|bsp_hosted|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -750,7 +756,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-release-q7s-em|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|cmake-build-debug|cmake-build-debug-q7s-em|build-Debug-Host|build-Watchdog-Debug" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-release-q7s-em|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|cmake-build-debug|cmake-build-debug-q7s-em|build-Debug-Host|build-Watchdog-Debug" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -917,7 +924,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug-q7s|cmake-build-release-q7s-em|cmake-build-release-q7s/_deps/etl-src/uml|cmake-build-release-q7s/_deps/etl-src/test|cmake-build-release-q7s/_deps/etl-src/temp|cmake-build-release-q7s/_deps/etl-src/support|cmake-build-release-q7s/_deps/etl-src/subprojects|cmake-build-release-q7s/_deps/etl-src/scripts|cmake-build-release-q7s/_deps/etl-src/images|cmake-build-release-q7s/_deps/etl-src/examples|cmake-build-release-q7s/_deps/etl-src/cmake|cmake-build-release-q7s/_deps/etl-src/arduino|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|cmake-build-debug|cmake-build-debug-q7s-em|build-Debug-Host|build-Watchdog-Debug" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s|cmake-build-release-q7s-em|cmake-build-release-q7s/_deps/etl-src/uml|cmake-build-release-q7s/_deps/etl-src/test|cmake-build-release-q7s/_deps/etl-src/temp|cmake-build-release-q7s/_deps/etl-src/support|cmake-build-release-q7s/_deps/etl-src/subprojects|cmake-build-release-q7s/_deps/etl-src/scripts|cmake-build-release-q7s/_deps/etl-src/images|cmake-build-release-q7s/_deps/etl-src/examples|cmake-build-release-q7s/_deps/etl-src/cmake|cmake-build-release-q7s/_deps/etl-src/arduino|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|cmake-build-debug|cmake-build-debug-q7s-em|build-Debug-Host|build-Watchdog-Debug" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -1084,7 +1092,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug/_deps/etl-src/uml|cmake-build-debug/_deps/etl-src/test|cmake-build-debug/_deps/etl-src/temp|cmake-build-debug/_deps/etl-src/support|cmake-build-debug/_deps/etl-src/subprojects|cmake-build-debug/_deps/etl-src/scripts|cmake-build-debug/_deps/etl-src/images|cmake-build-debug/_deps/etl-src/examples|cmake-build-debug/_deps/etl-src/cmake|cmake-build-debug/_deps/etl-src/arduino|cmake-build-release-q7s-em|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em/_deps/etl-src|cmake-build-debug/_deps/etl-src/uml|cmake-build-debug/_deps/etl-src/test|cmake-build-debug/_deps/etl-src/temp|cmake-build-debug/_deps/etl-src/support|cmake-build-debug/_deps/etl-src/subprojects|cmake-build-debug/_deps/etl-src/scripts|cmake-build-debug/_deps/etl-src/images|cmake-build-debug/_deps/etl-src/examples|cmake-build-debug/_deps/etl-src/cmake|cmake-build-debug/_deps/etl-src/arduino|cmake-build-release-q7s-em|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -1149,7 +1158,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug/_deps/etl-src/uml|cmake-build-debug/_deps/etl-src/test|cmake-build-debug/_deps/etl-src/temp|cmake-build-debug/_deps/etl-src/support|cmake-build-debug/_deps/etl-src/subprojects|cmake-build-debug/_deps/etl-src/scripts|cmake-build-debug/_deps/etl-src/images|cmake-build-debug/_deps/etl-src/examples|cmake-build-debug/_deps/etl-src/cmake|cmake-build-debug/_deps/etl-src/arduino|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em/_deps/etl-src|cmake-build-debug/_deps/etl-src/uml|cmake-build-debug/_deps/etl-src/test|cmake-build-debug/_deps/etl-src/temp|cmake-build-debug/_deps/etl-src/support|cmake-build-debug/_deps/etl-src/subprojects|cmake-build-debug/_deps/etl-src/scripts|cmake-build-debug/_deps/etl-src/images|cmake-build-debug/_deps/etl-src/examples|cmake-build-debug/_deps/etl-src/cmake|cmake-build-debug/_deps/etl-src/arduino|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -1172,7 +1182,7 @@
 				</extensions>
 			</storageModule>
 			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildProperties="" description="" errorParsers="org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.CWDLocator;org.eclipse.cdt.core.GCCErrorParser" id="cdt.managedbuild.toolchain.gnu.mingw.base.1455833186.1840876443.2117915473.688890851.1707795689.1171630561" name="eive-q7s-debug-em" optionalBuildProperties="org.eclipse.cdt.docker.launcher.containerbuild.property.enablement=null,org.eclipse.cdt.docker.launcher.containerbuild.property.selectedvolumes=,org.eclipse.cdt.docker.launcher.containerbuild.property.volumes=,org.eclipse.cdt.docker.launcher.containerbuild.property.image=null,org.eclipse.cdt.docker.launcher.containerbuild.property.connection=null" parent="org.eclipse.cdt.build.core.emptycfg">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" errorParsers="org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.CWDLocator;org.eclipse.cdt.core.GCCErrorParser" id="cdt.managedbuild.toolchain.gnu.mingw.base.1455833186.1840876443.2117915473.688890851.1707795689.1171630561" name="eive-q7s-debug-em" optionalBuildProperties="org.eclipse.cdt.docker.launcher.containerbuild.property.enablement=null,org.eclipse.cdt.docker.launcher.containerbuild.property.dockerdpath=,org.eclipse.cdt.docker.launcher.containerbuild.property.volumes=,org.eclipse.cdt.docker.launcher.containerbuild.property.connection=unix:///var/run/docker.sock,org.eclipse.cdt.docker.launcher.containerbuild.property.selectedvolumes=,org.eclipse.cdt.docker.launcher.containerbuild.property.image=null" parent="org.eclipse.cdt.build.core.emptycfg">
 					<folderInfo id="cdt.managedbuild.toolchain.gnu.mingw.base.1455833186.1840876443.2117915473.688890851.1707795689.1171630561." name="/" resourcePath="">
 						<toolChain id="ilg.gnuarmeclipse.managedbuild.cross.toolchain.base.1640701365" name="Arm Cross GCC" superClass="ilg.gnuarmeclipse.managedbuild.cross.toolchain.base">
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.architecture.564607779" name="Architecture" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.architecture" value="ilg.gnuarmeclipse.managedbuild.cross.option.architecture.arm" valueType="enumerated"/>
@@ -1317,7 +1327,9 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug-q7s|cmake-build-release-q7s-em|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|cmake-build-debug|build-Debug-Host|build-Watchdog-Debug" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em/_deps/etl-src|cmake-build-debug-q7s|cmake-build-release-q7s-em|build-Debug-RPi|bsp_hosted|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|cmake-build-debug|build-Debug-Host|build-Watchdog-Debug" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="cmake-build-debug-q7s-em/_deps/etl-src/include"/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -1386,7 +1398,8 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="cmake-build-debug/_deps/etl-src/uml|cmake-build-debug/_deps/etl-src/test|cmake-build-debug/_deps/etl-src/temp|cmake-build-debug/_deps/etl-src/support|cmake-build-debug/_deps/etl-src/subprojects|cmake-build-debug/_deps/etl-src/scripts|cmake-build-debug/_deps/etl-src/images|cmake-build-debug/_deps/etl-src/examples|cmake-build-debug/_deps/etl-src/cmake|cmake-build-debug/_deps/etl-src/arduino|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="unittest/rebootLogic|thirdparty/json|cmake-build-debug-q7s-em/_deps/etl-src|cmake-build-debug/_deps/etl-src/uml|cmake-build-debug/_deps/etl-src/test|cmake-build-debug/_deps/etl-src/temp|cmake-build-debug/_deps/etl-src/support|cmake-build-debug/_deps/etl-src/subprojects|cmake-build-debug/_deps/etl-src/scripts|cmake-build-debug/_deps/etl-src/images|cmake-build-debug/_deps/etl-src/examples|cmake-build-debug/_deps/etl-src/cmake|cmake-build-debug/_deps/etl-src/arduino|cmake-build-release-q7s-em|build-Debug-RPi|bsp_linux_board|cmake-build-debug-q7s/_deps/etl-src/uml|cmake-build-debug-q7s/_deps/etl-src/temp|cmake-build-debug-q7s/_deps/etl-src/support|cmake-build-debug-q7s/_deps/etl-src/subprojects|cmake-build-debug-q7s/_deps/etl-src/scripts|cmake-build-debug-q7s/_deps/etl-src/images|cmake-build-debug-q7s/_deps/etl-src/examples|cmake-build-debug-q7s/_deps/etl-src/cmake|cmake-build-debug-q7s/_deps/etl-src/arduino|tmtc|scripts|bsp_te0720_1cfa|thirdparty/rapidcsv/tests|thirdparty/rapidcsv/examples|thirdparty/rapidcsv/doc|thirdparty/json/third_party|thirdparty/json/test|thirdparty/json/single_include|thirdparty/json/doc|thirdparty/json/cmake|thirdparty/json/benchmarks|archive|cmake-build-release-q7s|bsp_egse|cmake-build-debug-q7s/_deps/etl-src/test|fsfwconfig" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name="thirdparty/json/include"/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>

mission/acs/GyrAdis1650XHandler.cpp

@@ -15,7 +15,7 @@ GyrAdis1650XHandler::GyrAdis1650XHandler(object_id_t objectId, object_id_t devic
 }
 
 void GyrAdis1650XHandler::doStartUp() {
-  if (internalState != InternalState::STARTUP) {
+  if (internalState == InternalState::NONE) {
     internalState = InternalState::STARTUP;
     commandExecuted = false;
   }
@@ -24,19 +24,21 @@ void GyrAdis1650XHandler::doStartUp() {
     if (not commandExecuted) {
       warningSwitch = true;
       breakCountdown.setTimeout(adis1650x::START_UP_TIME);
+      updatePeriodicReply(true, adis1650x::REPLY);
       commandExecuted = true;
     }
-    if (breakCountdown.hasTimedOut()) {
-      updatePeriodicReply(true, adis1650x::REPLY);
-      setMode(MODE_ON);
-      internalState = InternalState::NONE;
-    }
+  }
+  if (internalState == InternalState::STARTUP_DONE) {
+    setMode(MODE_ON);
+    commandExecuted = false;
+    internalState = InternalState::NONE;
   }
 }
 
 void GyrAdis1650XHandler::doShutDown() {
   if (internalState != InternalState::SHUTDOWN) {
     commandExecuted = false;
+    PoolReadGuard pg(&primaryDataset);
     primaryDataset.setValidity(false, true);
     internalState = InternalState::SHUTDOWN;
   }
@@ -60,6 +62,7 @@ ReturnValue_t GyrAdis1650XHandler::buildTransitionDeviceCommand(DeviceCommandId_
         return NOTHING_TO_SEND;
       }
       *id = adis1650x::REQUEST;
+      adisRequest.cfg.decRateReg = adis1650x::DEC_RATE;
       return preparePeriodicRequest(acs::SimpleSensorMode::NORMAL);
     }
     case (InternalState::SHUTDOWN): {
@@ -90,6 +93,9 @@ ReturnValue_t GyrAdis1650XHandler::scanForReply(const uint8_t *start, size_t rem
       getMode() == _MODE_POWER_DOWN) {
     return IGNORE_FULL_PACKET;
   }
+  if (internalState == InternalState::STARTUP) {
+    internalState = InternalState::STARTUP_DONE;
+  }
   *foundLen = remainingSize;
   if (remainingSize != sizeof(acs::Adis1650XReply)) {
     return returnvalue::FAILED;

mission/acs/GyrAdis1650XHandler.h

@@ -48,7 +48,7 @@ class GyrAdis1650XHandler : public DeviceHandlerBase {
 
   bool warningSwitch = true;
 
-  enum class InternalState { NONE, STARTUP, SHUTDOWN };
+  enum class InternalState { NONE, STARTUP, STARTUP_DONE, SHUTDOWN };
 
   InternalState internalState = InternalState::STARTUP;
   bool commandExecuted = false;

mission/acs/GyrL3gCustomHandler.cpp

@@ -33,6 +33,7 @@ void GyrL3gCustomHandler::doStartUp() {
 void GyrL3gCustomHandler::doShutDown() {
   if (internalState != InternalState::SHUTDOWN) {
     internalState = InternalState::SHUTDOWN;
+    PoolReadGuard pg(&dataset);
     dataset.setValidity(false, true);
     commandExecuted = false;
   }

mission/acs/MgmLis3CustomHandler.cpp

@@ -29,6 +29,7 @@ void MgmLis3CustomHandler::doStartUp() {
 
 void MgmLis3CustomHandler::doShutDown() {
   if (internalState != InternalState::SHUTDOWN) {
+    PoolReadGuard pg(&dataset);
     dataset.setValidity(false, true);
     internalState = InternalState::SHUTDOWN;
     commandExecuted = false;

mission/acs/MgmRm3100CustomHandler.cpp

@@ -33,6 +33,7 @@ void MgmRm3100CustomHandler::doStartUp() {
 void MgmRm3100CustomHandler::doShutDown() {
   if (internalState != InternalState::SHUTDOWN) {
     commandExecuted = false;
+    PoolReadGuard pg(&primaryDataset);
     primaryDataset.setValidity(false, true);
     internalState = InternalState::SHUTDOWN;
   }

mission/acs/SusHandler.cpp

@@ -29,6 +29,8 @@ void SusHandler::doStartUp() {
 
 void SusHandler::doShutDown() {
   if (internalState != InternalState::SHUTDOWN) {
+    PoolReadGuard pg(&dataset);
+    dataset.tempC = thermal::INVALID_TEMPERATURE;
     dataset.setValidity(false, true);
     internalState = InternalState::SHUTDOWN;
     commandExecuted = false;

mission/acs/acsBoardPolling.h

@@ -8,11 +8,6 @@
 
 namespace acs {
 
-struct Adis1650XRequest {
-  SimpleSensorMode mode;
-  adis1650x::Type type;
-};
-
 struct Adis1650XConfig {
   uint16_t diagStat;
   uint16_t filterSetting;
@@ -22,6 +17,12 @@ struct Adis1650XConfig {
   uint16_t prodId;
 };
 
+struct Adis1650XRequest {
+  SimpleSensorMode mode;
+  adis1650x::Type type;
+  Adis1650XConfig cfg;
+};
+
 struct Adis1650XData {
   double sensitivity = 0.0;
   // Angular velocities in all axes (X, Y and Z)

mission/acs/defs.h

@@ -3,6 +3,7 @@
 
 #include <eive/eventSubsystemIds.h>
 #include <fsfw/modes/HasModesIF.h>
+#include <mission/sysDefs.h>
 
 namespace acs {
 
@@ -11,12 +12,12 @@ enum class SimpleSensorMode { NORMAL = 0, OFF = 1 };
 // These modes are the modes of the ACS controller and of the ACS subsystem.
 enum AcsMode : Mode_t {
   OFF = HasModesIF::MODE_OFF,
-  SAFE = 10,
-  PTG_IDLE = 11,
-  PTG_NADIR = 12,
-  PTG_TARGET = 13,
-  PTG_TARGET_GS = 14,
-  PTG_INERTIAL = 15,
+  SAFE = satsystem::Mode::SAFE,
+  PTG_IDLE = satsystem::Mode::PTG_IDLE,
+  PTG_NADIR = satsystem::Mode::PTG_NADIR,
+  PTG_TARGET = satsystem::Mode::PTG_TARGET,
+  PTG_TARGET_GS = satsystem::Mode::PTG_TARGET_GS,
+  PTG_INERTIAL = satsystem::Mode::PTG_INERTIAL,
 };
 
 enum SafeSubmode : Submode_t { DEFAULT = 0, DETUMBLE = 1 };

mission/acs/gyroAdisHelpers.cpp

@@ -52,3 +52,14 @@ double adis1650x::rangMdlToSensitivity(uint16_t rangMdl) {
     }
   }
 }
+
+void adis1650x::prepareWriteRegCommand(uint8_t regStart, uint16_t val, uint8_t* outBuf,
+                                       size_t maxLen) {
+  if (maxLen < 4) {
+    return;
+  }
+  outBuf[0] = regStart | adis1650x::WRITE_MASK;
+  outBuf[1] = val & 0xff;
+  outBuf[2] = (regStart + 1) | adis1650x::WRITE_MASK;
+  outBuf[3] = (val >> 8) & 0xff;
+}

mission/acs/gyroAdisHelpers.h

@@ -16,6 +16,8 @@ enum class BurstModes {
 };
 
 size_t prepareReadCommand(const uint8_t* regList, size_t len, uint8_t* outBuf, size_t maxLen);
+void prepareWriteRegCommand(uint8_t regStart, uint16_t val, uint8_t* outBuf, size_t maxLen);
+
 BurstModes burstModeFromMscCtrl(uint16_t mscCtrl);
 double rangMdlToSensitivity(uint16_t rangMdl);
 
@@ -92,6 +94,9 @@ static constexpr size_t SENSOR_READOUT_SIZE = 20 + 2;
 static constexpr uint32_t ADIS_DATASET_ID = READ_SENSOR_DATA;
 static constexpr uint32_t ADIS_CFG_DATASET_ID = READ_OUT_CONFIG;
 
+static constexpr uint16_t FILT_CTRL = 0x0000;
+static constexpr uint16_t DEC_RATE = 0x00C7;
+
 enum GlobCmds : uint8_t {
   FACTORY_CALIBRATION = 0b0000'0010,
   SENSOR_SELF_TEST = 0b0000'0100,

mission/acs/str/ArcsecDatalinkLayer.cpp

@@ -1,10 +1,11 @@
 #include "ArcsecDatalinkLayer.h"
 
 extern "C" {
+#include <wire/common/SLIP.h>
 #include <wire/common/misc.h>
 }
 
-ArcsecDatalinkLayer::ArcsecDatalinkLayer() : decodeRingBuf(BUFFER_LENGTHS, true) { slipInit(); }
+ArcsecDatalinkLayer::ArcsecDatalinkLayer() : decodeRingBuf(BUFFER_LENGTHS, true) {}
 
 ArcsecDatalinkLayer::~ArcsecDatalinkLayer() {}
 
@@ -15,35 +16,50 @@ ReturnValue_t ArcsecDatalinkLayer::checkRingBufForFrame(const uint8_t** decodedF
     return DEC_IN_PROGRESS;
   }
   decodeRingBuf.readData(rxAnalysisBuffer, currentLen);
+
+  bool startFound = false;
+  size_t startIdx = 0;
   for (size_t idx = 0; idx < currentLen; idx++) {
-    enum arc_dec_result decResult =
-        arc_transport_decode_body(rxAnalysisBuffer[idx], &slipInfo, decodedRxFrame, &rxFrameSize);
-    switch (decResult) {
-      case ARC_DEC_INPROGRESS: {
-        break;
-      }
-      case ARC_DEC_ERROR: {
-        decodeRingBuf.deleteData(idx);
-        return returnvalue::FAILED;
-      }
-      case ARC_DEC_ASYNC:
-      case ARC_DEC_SYNC: {
-        // Reset length of SLIP struct for next frame
-        slipInfo.length = 0;
+    if (rxAnalysisBuffer[idx] != SLIP_START_AND_END) {
+      continue;
+    }
+    if (not startFound) {
+      startFound = true;
+      startIdx = idx;
+      continue;
+    }
+    // Now we can try decoding the whole frame.
+    size_t encodedDataSize = 0;
+    slip_error_t slipError =
+        slip_decode_frame(decodedRxFrame, &rxFrameSize, rxAnalysisBuffer + startIdx,
+                          idx - startIdx + 1, &encodedDataSize, ARC_DEF_SAGITTA_SLIP_ID);
+    decodeRingBuf.deleteData(idx + 1);
+    switch (slipError) {
+      case (SLIP_OK): {
         if (decodedFrame != nullptr) {
           *decodedFrame = decodedRxFrame;
         }
         frameLen = rxFrameSize;
-        decodeRingBuf.deleteData(idx);
         return returnvalue::OK;
       }
-      default:
-        sif::debug << "ArcsecDatalinkLayer::decodeFrame: Unknown result code" << std::endl;
-        break;
+      case (SLIP_BAD_CRC): {
+        return CRC_FAILURE;
+      }
+      case (SLIP_OVERFLOW): {
+        return SLIP_OVERFLOW_RETVAL;
+      }
+      // Should not happen, we searched for start and end marker..
+      case (SLIP_NO_END): {
         return returnvalue::FAILED;
+      }
+      case (SLIP_ID_MISMATCH): {
+        return SLIP_ID_MISSMATCH_RETVAL;
+      }
+      default: {
+        return returnvalue::FAILED;
+      }
     }
   }
-  decodeRingBuf.deleteData(currentLen);
   return DEC_IN_PROGRESS;
 }
 
@@ -56,18 +72,11 @@ ReturnValue_t ArcsecDatalinkLayer::feedData(const uint8_t* rawData, size_t rawDa
   return decodeRingBuf.writeData(rawData, rawDataLen);
 }
 
-void ArcsecDatalinkLayer::reset() {
-  slipInit();
-  decodeRingBuf.clear();
-}
-
-void ArcsecDatalinkLayer::slipInit() {
-  slip_decode_init(rxBufferArc, sizeof(rxBufferArc), &slipInfo);
-}
+void ArcsecDatalinkLayer::reset() { decodeRingBuf.clear(); }
 
 void ArcsecDatalinkLayer::encodeFrame(const uint8_t* data, size_t length, const uint8_t** txFrame,
                                       size_t& size) {
-  arc_transport_encode_body(data, length, txEncoded, &size);
+  slip_encode_frame(data, length, txEncoded, &size, ARC_DEF_SAGITTA_SLIP_ID);
   if (txFrame != nullptr) {
     *txFrame = txEncoded;
   }

mission/acs/str/ArcsecDatalinkLayer.h

@@ -25,6 +25,8 @@ class ArcsecDatalinkLayer {
   static const ReturnValue_t REPLY_TOO_SHORT = MAKE_RETURN_CODE(0xA1);
   //! [EXPORT] : [COMMENT] Detected CRC failure in received frame
   static const ReturnValue_t CRC_FAILURE = MAKE_RETURN_CODE(0xA2);
+  static const ReturnValue_t SLIP_OVERFLOW_RETVAL = MAKE_RETURN_CODE(0xA3);
+  static const ReturnValue_t SLIP_ID_MISSMATCH_RETVAL = MAKE_RETURN_CODE(0xA4);
 
   static const uint8_t STATUS_OK = 0;
 
@@ -77,7 +79,7 @@ class ArcsecDatalinkLayer {
   // Decoded frame will be copied to this buffer
   uint8_t decodedRxFrame[startracker::MAX_FRAME_SIZE];
   // Size of decoded frame
-  uint32_t rxFrameSize = 0;
+  size_t rxFrameSize = 0;
 
   // Buffer where encoded frames will be stored. First byte of encoded frame represents type of
   // reply
@@ -85,7 +87,7 @@ class ArcsecDatalinkLayer {
   // Size of encoded frame
   uint32_t txFrameSize = 0;
 
-  slip_decode_state slipInfo;
+  // slip_decode_state slipInfo;
 
   void slipInit();
 };

mission/acs/str/StarTrackerHandler.cpp

@@ -5,7 +5,11 @@
 #include <mission/acs/str/strJsonCommands.h>
 
 extern "C" {
-#include <sagitta/client/arc_client.h>
+#include <sagitta/client/actionreq.h>
+#include <sagitta/client/client_tm_structs.h>
+#include <sagitta/client/parameter.h>
+#include <sagitta/client/telemetry.h>
+#include <wire/common/genericstructs.h>
 }
 
 #include <atomic>
@@ -13,6 +17,8 @@ extern "C" {
 #include <thread>
 
 #include "OBSWConfig.h"
+#include "eive/definitions.h"
+#include "fsfw/thermal/tcsDefinitions.h"
 
 std::atomic_bool JCFG_DONE(false);
 
@@ -95,6 +101,22 @@ void StarTrackerHandler::doShutDown() {
   startupState = StartupState::IDLE;
   bootState = FwBootState::NONE;
   solutionSet.setReportingEnabled(false);
+  {
+    PoolReadGuard pg(&solutionSet);
+    solutionSet.caliQw.value = 0.0;
+    solutionSet.caliQx.value = 0.0;
+    solutionSet.caliQy.value = 0.0;
+    solutionSet.caliQz.value = 0.0;
+    solutionSet.isTrustWorthy.value = 0;
+    solutionSet.setValidity(false, true);
+  }
+  {
+    PoolReadGuard pg(&temperatureSet);
+    temperatureSet.fpgaTemperature = thermal::INVALID_TEMPERATURE;
+    temperatureSet.cmosTemperature = thermal::INVALID_TEMPERATURE;
+    temperatureSet.mcuTemperature = thermal::INVALID_TEMPERATURE;
+    temperatureSet.setValidity(false, true);
+  }
   reinitNextSetParam = false;
   setMode(_MODE_POWER_DOWN);
 }
@@ -148,7 +170,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
       return EXECUTION_FINISHED;
     }
     case (startracker::SET_JSON_FILE_NAME): {
-      if (size > MAX_PATH_SIZE) {
+      if (size > config::MAX_PATH_SIZE) {
         return FILE_PATH_TOO_LONG;
       }
       paramJsonFile = std::string(reinterpret_cast<const char*>(data), size);
@@ -185,7 +207,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
       if (result != returnvalue::OK) {
         return result;
       }
-      if (size > MAX_PATH_SIZE + MAX_FILE_NAME) {
+      if (size > config::MAX_PATH_SIZE + config::MAX_FILENAME_SIZE) {
         return FILE_PATH_TOO_LONG;
       }
       result = strHelper->startImageUpload(std::string(reinterpret_cast<const char*>(data), size));
@@ -200,7 +222,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
       if (result != returnvalue::OK) {
         return result;
       }
-      if (size > MAX_PATH_SIZE) {
+      if (size > config::MAX_PATH_SIZE) {
         return FILE_PATH_TOO_LONG;
       }
       result =
@@ -224,14 +246,14 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
       return EXECUTION_FINISHED;
     }
     case (startracker::CHANGE_IMAGE_DOWNLOAD_FILE): {
-      if (size > MAX_FILE_NAME) {
+      if (size > config::MAX_FILENAME_SIZE) {
         return FILENAME_TOO_LONG;
       }
       strHelper->setDownloadImageName(std::string(reinterpret_cast<const char*>(data), size));
       return EXECUTION_FINISHED;
     }
     case (startracker::SET_FLASH_READ_FILENAME): {
-      if (size > MAX_FILE_NAME) {
+      if (size > config::MAX_FILENAME_SIZE) {
         return FILENAME_TOO_LONG;
       }
       strHelper->setFlashReadFilename(std::string(reinterpret_cast<const char*>(data), size));
@@ -242,7 +264,7 @@ ReturnValue_t StarTrackerHandler::executeAction(ActionId_t actionId, MessageQueu
       if (result != returnvalue::OK) {
         return result;
       }
-      if (size > MAX_PATH_SIZE + MAX_FILE_NAME) {
+      if (size > config::MAX_PATH_SIZE + config::MAX_FILENAME_SIZE) {
         return FILE_PATH_TOO_LONG;
       }
       result =
@@ -880,7 +902,7 @@ ReturnValue_t StarTrackerHandler::interpretDeviceReply(DeviceCommandId_t id,
 
   switch (id) {
     case (startracker::REQ_TIME): {
-      result = handleTm(packet, timeSet, startracker::TimeSet::SIZE);
+      result = handleTm(packet, timeSet, startracker::TimeSet::SIZE, "REQ_TIME");
       break;
     }
     case (startracker::PING_REQUEST): {
@@ -895,7 +917,7 @@ ReturnValue_t StarTrackerHandler::interpretDeviceReply(DeviceCommandId_t id,
       break;
     }
     case (startracker::REQ_VERSION): {
-      result = handleTm(packet, versionSet, startracker::VersionSet::SIZE);
+      result = handleTm(packet, versionSet, startracker::VersionSet::SIZE, "REQ_VERSION");
       if (result != returnvalue::OK) {
         return result;
       }
@@ -906,23 +928,23 @@ ReturnValue_t StarTrackerHandler::interpretDeviceReply(DeviceCommandId_t id,
       break;
     }
     case (startracker::REQ_INTERFACE): {
-      result = handleTm(packet, interfaceSet, startracker::InterfaceSet::SIZE);
+      result = handleTm(packet, interfaceSet, startracker::InterfaceSet::SIZE, "REQ_INTERFACE");
       break;
     }
     case (startracker::REQ_POWER): {
-      result = handleTm(packet, powerSet, startracker::PowerSet::SIZE);
+      result = handleTm(packet, powerSet, startracker::PowerSet::SIZE, "REQ_POWER");
       break;
     }
     case (startracker::REQ_SOLUTION): {
-      result = handleTm(packet, solutionSet, startracker::SolutionSet::SIZE);
+      result = handleTm(packet, solutionSet, startracker::SolutionSet::SIZE, "REQ_SOLUTION");
       break;
     }
     case (startracker::REQ_TEMPERATURE): {
-      result = handleTm(packet, temperatureSet, startracker::TemperatureSet::SIZE);
+      result = handleTm(packet, temperatureSet, startracker::TemperatureSet::SIZE, "REQ_TEMP");
       break;
     }
     case (startracker::REQ_HISTOGRAM): {
-      result = handleTm(packet, histogramSet, startracker::HistogramSet::SIZE);
+      result = handleTm(packet, histogramSet, startracker::HistogramSet::SIZE, "REQ_HISTO");
       break;
     }
     case (startracker::SUBSCRIPTION):
@@ -1564,7 +1586,7 @@ ReturnValue_t StarTrackerHandler::executeFlashReadCommand(const uint8_t* command
                << std::endl;
     return result;
   }
-  if (commandDataLen - sizeof(startRegion) - sizeof(length) > MAX_PATH_SIZE) {
+  if (commandDataLen - sizeof(startRegion) - sizeof(length) > config::MAX_PATH_SIZE) {
     sif::warning << "StarTrackerHandler::executeFlashReadCommand: Received command with invalid"
                  << " path and filename" << std::endl;
     return FILE_PATH_TOO_LONG;
@@ -1704,7 +1726,7 @@ ReturnValue_t StarTrackerHandler::prepareParamCommand(const uint8_t* commandData
                                                       bool reinitSet) {
   // Stopwatch watch;
   ReturnValue_t result = returnvalue::OK;
-  if (commandDataLen > MAX_PATH_SIZE) {
+  if (commandDataLen > config::MAX_PATH_SIZE) {
     return FILE_PATH_TOO_LONG;
   }
   if (reinitSet) {
@@ -1972,7 +1994,7 @@ ReturnValue_t StarTrackerHandler::checkProgram() {
 }
 
 ReturnValue_t StarTrackerHandler::handleTm(const uint8_t* rawFrame, LocalPoolDataSetBase& dataset,
-                                           size_t size) {
+                                           size_t size, const char* context) {
   ReturnValue_t result = returnvalue::OK;
   uint8_t status = startracker::getStatusField(rawFrame);
   if (status != startracker::STATUS_OK) {
@@ -1988,7 +2010,8 @@ ReturnValue_t StarTrackerHandler::handleTm(const uint8_t* rawFrame, LocalPoolDat
   dataset.setValidityBufferGeneration(false);
   result = dataset.deSerialize(&reply, &size, SerializeIF::Endianness::LITTLE);
   if (result != returnvalue::OK) {
-    sif::warning << "StarTrackerHandler::handleTm: Deserialization failed" << std::endl;
+    sif::warning << "StarTrackerHandler::handleTm: Deserialization failed for " << context
+                 << std::endl;
   }
   dataset.setValidityBufferGeneration(true);
   dataset.setValidity(true, true);

mission/acs/str/StarTrackerHandler.h

@@ -144,9 +144,6 @@ class StarTrackerHandler : public DeviceHandlerBase {
   //! [EXPORT] : [COMMENT] Failed to boot star tracker into bootloader mode
   static const Event BOOTING_BOOTLOADER_FAILED_EVENT = MAKE_EVENT(2, severity::LOW);
 
-  static const size_t MAX_PATH_SIZE = 50;
-  static const size_t MAX_FILE_NAME = 30;
-
   static const uint8_t STATUS_OFFSET = 2;
   static const uint8_t PARAMS_OFFSET = 2;
   static const uint8_t TICKS_OFFSET = 3;
@@ -481,7 +478,8 @@ class StarTrackerHandler : public DeviceHandlerBase {
    *
    * @return  returnvalue::OK if successful, otherwise error return value
    */
-  ReturnValue_t handleTm(const uint8_t* rawFrame, LocalPoolDataSetBase& dataset, size_t size);
+  ReturnValue_t handleTm(const uint8_t* rawFrame, LocalPoolDataSetBase& dataset, size_t size,
+                         const char* context);
 
   /**
    * @brief Checks if star tracker is in valid mode for executing the received command.

mission/acs/str/strHelpers.h

@@ -641,7 +641,7 @@ class TimeSet : public StaticLocalDataSet<TIME_SET_ENTRIES> {
  */
 class SolutionSet : public StaticLocalDataSet<SOLUTION_SET_ENTRIES> {
  public:
-  static const size_t SIZE = 78;
+  static const size_t SIZE = 79;
 
   SolutionSet(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, SOLUTION_SET_ID) {}
 

mission/cfdp/CfdpHandler.cpp

@@ -93,6 +93,8 @@ ReturnValue_t CfdpHandler::handleCfdpPacket(TmTcMessage& msg) {
       return INVALID_PDU_FORMAT;
     }
     if (not FileDirectiveReader::checkFileDirective(pduDataField[0])) {
+      sif::error << "CfdpHandler: Invalid PDU directive field " << static_cast<int>(pduDataField[0])
+                 << std::endl;
       return INVALID_DIRECTIVE_FIELD;
     }
     auto directive = static_cast<FileDirective>(pduDataField[0]);

mission/com/CcsdsIpCoreHandler.cpp

@@ -246,7 +246,13 @@ ReturnValue_t CcsdsIpCoreHandler::checkModeCommand(Mode_t mode, Submode_t submod
 void CcsdsIpCoreHandler::startTransition(Mode_t mode, Submode_t submode) {
   triggerEvent(CHANGING_MODE, mode, submode);
   if (mode == HasModesIF::MODE_ON) {
-    if (this->submode != submode) {
+    uint32_t currentRate = ptmeConfig.getRate();
+    // Check whether the rate actually changes.
+    if ((this->submode != submode) and
+        (((submode == static_cast<Submode_t>(com::CcsdsSubmode::DATARATE_LOW) and
+           (currentRate != RATE_100KBPS))) or
+         ((submode == static_cast<Submode_t>(com::CcsdsSubmode::DATARATE_HIGH) and
+           (currentRate != RATE_500KBPS))))) {
       initPtmeUpdateAfterXCycles();
       updateContext.enableTransmitAfterPtmeUpdate = true;
       updateContext.updateClockRate = true;

mission/com/LiveTmTask.cpp

@@ -19,13 +19,8 @@ LiveTmTask::LiveTmTask(object_id_t objectId, PusTmFunnel& pusFunnel, CfdpTmFunne
 ReturnValue_t LiveTmTask::performOperation(uint8_t opCode) {
   readCommandQueue();
   while (true) {
-    bool performWriteOp = true;
-    if (mode == MODE_OFF or ptmeLocked) {
-      performWriteOp = false;
-    }
-
     // The funnel tasks are scheduled here directly as well.
-    ReturnValue_t result = channel.handleNextTm(performWriteOp);
+    ReturnValue_t result = channel.handleNextTm(!ptmeLocked);
     if (result == DirectTmSinkIF::IS_BUSY) {
       sif::error << "Lost live TM, PAPB busy" << std::endl;
     }

mission/com/PersistentLogTmStoreTask.cpp

@@ -42,13 +42,7 @@ ReturnValue_t PersistentLogTmStoreTask::performOperation(uint8_t opCode) {
     if (not someonesBusy) {
       TaskFactory::delayTask(100);
     } else if (vcBusyDuringDump) {
-      // TODO: Might not be necessary
-      sif::debug << "VC busy, delaying" << std::endl;
       TaskFactory::delayTask(10);
-    } else {
-      // TODO: Would be best to remove this, but not delaying here can lead to evil issues.
-      // Polling the PAPB of the PTME core too often leads to scheuduling issues.
-      TaskFactory::delayTask(2);
     }
   }
 }

mission/com/PersistentSingleTmStoreTask.cpp

@@ -24,13 +24,7 @@ ReturnValue_t PersistentSingleTmStoreTask::performOperation(uint8_t opCode) {
     if (not busy) {
       TaskFactory::delayTask(100);
     } else if (dumpContext.vcBusyDuringDump) {
-      sif::debug << "VC busy, delaying" << std::endl;
-      // TODO: Might not be necessary
       TaskFactory::delayTask(10);
-    } else {
-      // TODO: Would be best to remove this, but not delaying here can lead to evil issues.
-      // Polling the PAPB of the PTME core too often leads to scheuduling issues.
-      TaskFactory::delayTask(2);
     }
   }
 }

mission/com/SyrlinksHandler.cpp

@@ -773,11 +773,13 @@ void SyrlinksHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
   auto txStandbyHandler = [&]() {
     txDataset.setReportingEnabled(false);
     poolManager.changeCollectionInterval(temperatureSet.getSid(), 60.0);
+    poolManager.changeCollectionInterval(rxDataset.getSid(), 60.0);
     transState = TransitionState::SET_TX_STANDBY;
     internalState = InternalState::TX_TRANSITION;
   };
   auto txOnHandler = [&](TransitionState tgtTransitionState) {
     txDataset.setReportingEnabled(true);
+    poolManager.changeCollectionInterval(rxDataset.getSid(), 5.0);
     poolManager.changeCollectionInterval(txDataset.getSid(), 10.0);
     poolManager.changeCollectionInterval(temperatureSet.getSid(), 5.0);
     transState = tgtTransitionState;

mission/com/TmStoreTaskBase.cpp

@@ -45,13 +45,19 @@ bool TmStoreTaskBase::handleOneStore(PersistentTmStoreWithTmQueue& store,
   } else {
     Command_t execCmd;
     // Handle TC requests, for example deletion or retrieval requests.
+    // TODO: Not really clean here.. would be better if the executed command is returns as an
+    // enumeration.
     result = store.handleCommandQueue(ipcStore, execCmd);
-    if (result == returnvalue::OK) {
-      if (execCmd == TmStoreMessage::DOWNLINK_STORE_CONTENT_TIME) {
+    if (execCmd == TmStoreMessage::DOWNLINK_STORE_CONTENT_TIME) {
+      if (result == PersistentTmStore::DUMP_DONE) {
+        dumpDoneHandler(store, dumpContext);
+      } else if (result == returnvalue::OK) {
         cancelDumpCd.resetTimer();
         tmSinkBusyCd.resetTimer();
         dumpContext.reset();
       }
+    }
+    if (execCmd != CommandMessageIF::CMD_NONE) {
       tcRequestReceived = true;
     }
   }
@@ -94,13 +100,6 @@ void TmStoreTaskBase::cancelDump(DumpContext& ctx, PersistentTmStore& store, boo
 ReturnValue_t TmStoreTaskBase::handleOneDump(PersistentTmStoreWithTmQueue& store,
                                              DumpContext& dumpContext, bool& dumpPerformed) {
   ReturnValue_t result = returnvalue::OK;
-  // The PTME might have been reset an transmitter state change, so there is no point in continuing
-  // the dump.
-  // TODO: Will be solved in a cleaner way, this is kind of a hack.
-  if (not channel.isTxOn()) {
-    cancelDump(dumpContext, store, false);
-    return returnvalue::FAILED;
-  }
   // It is assumed that the PTME will only be locked for a short period (e.g. to change datarate).
   if (not channel.isBusy() and not ptmeLocked) {
     performDump(store, dumpContext, dumpPerformed);
@@ -126,37 +125,26 @@ ReturnValue_t TmStoreTaskBase::performDump(PersistentTmStoreWithTmQueue& store,
                                            DumpContext& dumpContext, bool& dumpPerformed) {
   size_t dumpedLen = 0;
 
-  auto dumpDoneHandler = [&]() {
-    uint32_t startTime;
-    uint32_t endTime;
-    store.getStartAndEndTimeCurrentOrLastDump(startTime, endTime);
-    triggerEvent(dumpContext.eventIfDone, dumpContext.numberOfDumpedPackets,
-                 dumpContext.dumpedBytes);
-    dumpContext.reset();
-  };
   // Dump the next packet into the PTME.
   dumpContext.ptmeBusyCounter = 0;
   tmSinkBusyCd.resetTimer();
   ReturnValue_t result = store.getNextDumpPacket(tmReader, fileHasSwapped);
-  if (result != returnvalue::OK) {
-    sif::error << "PersistentTmStore: Getting next dump packet failed" << std::endl;
-  } else if (fileHasSwapped or result == PersistentTmStore::DUMP_DONE) {
+  if (fileHasSwapped and result == PersistentTmStore::DUMP_DONE) {
     // This can happen if a file is corrupted and the next file swap completes the dump.
-    dumpDoneHandler();
+    dumpDoneHandler(store, dumpContext);
     return returnvalue::OK;
+  } else if (result != returnvalue::OK) {
+    sif::error << "PersistentTmStore: Getting next dump packet failed" << std::endl;
+    return result;
   }
   dumpedLen = tmReader.getFullPacketLen();
-  // Only write to VC if mode is on, but always confirm the dump.
-  // If the mode is OFF, it is assumed the PTME is not usable and is not allowed to be written
-  // (e.g. to confirm a reset or the transmitter is off anyway).
-  if (mode == MODE_ON) {
-    result = channel.write(tmReader.getFullData(), dumpedLen);
-    if (result == DirectTmSinkIF::IS_BUSY) {
-      sif::warning << "PersistentTmStore: Unexpected VC channel busy" << std::endl;
-    } else if (result != returnvalue::OK) {
-      sif::warning << "PersistentTmStore: Unexpected VC channel write failure" << std::endl;
-    }
+  result = channel.write(tmReader.getFullData(), dumpedLen);
+  if (result == DirectTmSinkIF::IS_BUSY) {
+    sif::warning << "PersistentTmStore: Unexpected VC channel busy" << std::endl;
+  } else if (result != returnvalue::OK) {
+    sif::warning << "PersistentTmStore: Unexpected VC channel write failure" << std::endl;
   }
+
   result = store.confirmDump(tmReader, fileHasSwapped);
   if ((result == PersistentTmStore::DUMP_DONE or result == returnvalue::OK)) {
     dumpPerformed = true;
@@ -167,7 +155,7 @@ ReturnValue_t TmStoreTaskBase::performDump(PersistentTmStoreWithTmQueue& store,
     }
   }
   if (result == PersistentTmStore::DUMP_DONE) {
-    dumpDoneHandler();
+    dumpDoneHandler(store, dumpContext);
   }
   return returnvalue::OK;
 }
@@ -208,6 +196,14 @@ ReturnValue_t TmStoreTaskBase::connectModeTreeParent(HasModeTreeChildrenIF& pare
   return modetree::connectModeTreeParent(parent, *this, nullptr, modeHelper);
 }
 
+void TmStoreTaskBase::dumpDoneHandler(PersistentTmStore& store, DumpContext& dumpContext) {
+  uint32_t startTime;
+  uint32_t endTime;
+  store.getStartAndEndTimeCurrentOrLastDump(startTime, endTime);
+  triggerEvent(dumpContext.eventIfDone, dumpContext.numberOfDumpedPackets, dumpContext.dumpedBytes);
+  dumpContext.reset();
+}
+
 ModeTreeChildIF& TmStoreTaskBase::getModeTreeChildIF() { return *this; }
 
 void TmStoreTaskBase::readCommandQueue(void) {

mission/com/TmStoreTaskBase.h

@@ -96,6 +96,8 @@ class TmStoreTaskBase : public SystemObject,
 
   ReturnValue_t checkModeCommand(Mode_t mode, Submode_t submode,
                                  uint32_t* msToReachTheMode) override;
+  void dumpDoneHandler(PersistentTmStore& store, DumpContext& dumpContext);
+
   void announceMode(bool recursive) override;
   object_id_t getObjectId() const override;
   const HasHealthIF* getOptHealthIF() const override;

mission/com/VirtualChannel.cpp

@@ -11,23 +11,14 @@ ReturnValue_t VirtualChannel::sendNextTm(const uint8_t* data, size_t size) {
 }
 
 ReturnValue_t VirtualChannel::write(const uint8_t* data, size_t size) {
-  if (txOn) {
-    return ptme.writeToVc(vcId, data, size);
-  }
-  return returnvalue::OK;
+  return ptme.writeToVc(vcId, data, size);
 }
 
 uint8_t VirtualChannel::getVcid() const { return vcId; }
 
 const char* VirtualChannel::getName() const { return vcName.c_str(); }
 
-bool VirtualChannel::isBusy() const {
-  // Data is discarded, so channel is not busy.
-  if (not txOn) {
-    return false;
-  }
-  return ptme.isBusy(vcId);
-}
+bool VirtualChannel::isBusy() const { return ptme.isBusy(vcId); }
 
 void VirtualChannel::cancelTransfer() { ptme.cancelTransfer(vcId); }
 

mission/controller/AcsController.cpp

@@ -169,7 +169,7 @@ void AcsController::performSafe() {
   guidance.getTargetParamsSafe(sunTargetDir);
 
   double magMomMtq[3] = {0, 0, 0}, errAng = 0.0;
-  uint8_t safeCtrlStrat = safeCtrl.safeCtrlStrategy(
+  acs::SafeModeStrategy safeCtrlStrat = safeCtrl.safeCtrlStrategy(
       mgmDataProcessed.mgmVecTot.isValid(), not mekfInvalidFlag,
       gyrDataProcessed.gyrVecTot.isValid(), susDataProcessed.susVecTot.isValid(),
       acsParameters.safeModeControllerParameters.useMekf,
@@ -205,11 +205,13 @@ void AcsController::performSafe() {
     case (acs::SafeModeStrategy::SAFECTRL_NO_SENSORS_FOR_CONTROL):
       safeCtrlFailure(0, 1);
       break;
+    default:
+      sif::error << "AcsController: Invalid safe mode strategy for performSafe" << std::endl;
+      break;
   }
 
-  actuatorCmd.cmdDipolMtq(magMomMtq, cmdDipolMtqs,
-                          *acsParameters.magnetorquerParameter.inverseAlignment,
-                          acsParameters.magnetorquerParameter.dipolMax);
+  actuatorCmd.cmdDipoleMtq(*acsParameters.magnetorquerParameter.inverseAlignment,
+                           acsParameters.magnetorquerParameter.dipoleMax, magMomMtq, cmdDipoleMtqs);
 
   // detumble check and switch
   if (mekfData.satRotRateMekf.isValid() && acsParameters.safeModeControllerParameters.useMekf &&
@@ -231,8 +233,8 @@ void AcsController::performSafe() {
   }
 
   updateCtrlValData(errAng, safeCtrlStrat);
-  updateActuatorCmdData(cmdDipolMtqs);
-  commandActuators(cmdDipolMtqs[0], cmdDipolMtqs[1], cmdDipolMtqs[2],
+  updateActuatorCmdData(cmdDipoleMtqs);
+  commandActuators(cmdDipoleMtqs[0], cmdDipoleMtqs[1], cmdDipoleMtqs[2],
                    acsParameters.magnetorquerParameter.torqueDuration);
 }
 
@@ -259,7 +261,7 @@ void AcsController::performDetumble() {
     triggerEvent(acs::MEKF_RECOVERY);
     mekfInvalidFlag = false;
   }
-  uint8_t safeCtrlStrat = detumble.detumbleStrategy(
+  acs::SafeModeStrategy safeCtrlStrat = detumble.detumbleStrategy(
       mgmDataProcessed.mgmVecTot.isValid(), gyrDataProcessed.gyrVecTot.isValid(),
       mgmDataProcessed.mgmVecTotDerivative.isValid(),
       acsParameters.detumbleParameter.useFullDetumbleLaw);
@@ -279,11 +281,13 @@ void AcsController::performDetumble() {
     case (acs::SafeModeStrategy::SAFECTRL_NO_SENSORS_FOR_CONTROL):
       safeCtrlFailure(0, 1);
       break;
+    default:
+      sif::error << "AcsController: Invalid safe mode strategy for performDetumble" << std::endl;
+      break;
   }
 
-  actuatorCmd.cmdDipolMtq(magMomMtq, cmdDipolMtqs,
-                          *acsParameters.magnetorquerParameter.inverseAlignment,
-                          acsParameters.magnetorquerParameter.dipolMax);
+  actuatorCmd.cmdDipoleMtq(*acsParameters.magnetorquerParameter.inverseAlignment,
+                           acsParameters.magnetorquerParameter.dipoleMax, magMomMtq, cmdDipoleMtqs);
 
   if (mekfData.satRotRateMekf.isValid() &&
       VectorOperations<double>::norm(mekfData.satRotRateMekf.value, 3) <
@@ -304,8 +308,8 @@ void AcsController::performDetumble() {
   }
 
   disableCtrlValData();
-  updateActuatorCmdData(cmdDipolMtqs);
-  commandActuators(cmdDipolMtqs[0], cmdDipolMtqs[1], cmdDipolMtqs[2],
+  updateActuatorCmdData(cmdDipoleMtqs);
+  commandActuators(cmdDipoleMtqs[0], cmdDipoleMtqs[1], cmdDipoleMtqs[2],
                    acsParameters.magnetorquerParameter.torqueDuration);
 }
 
@@ -349,8 +353,10 @@ void AcsController::performPointingCtrl() {
   double rwPseudoInv[4][3] = {{0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}};
   result = guidance.getDistributionMatrixRw(&sensorValues, *rwPseudoInv);
   if (result == returnvalue::FAILED) {
-    if (multipleRwUnavailableCounter == 5) {
+    if (multipleRwUnavailableCounter >=
+        acsParameters.rwHandlingParameters.multipleRwInvalidTimeout) {
       triggerEvent(acs::MULTIPLE_RW_INVALID);
+      multipleRwUnavailableCounter = 0;
     }
     multipleRwUnavailableCounter++;
     return;
@@ -364,24 +370,26 @@ void AcsController::performPointingCtrl() {
   // Variables required for setting actuators
   double torquePtgRws[4] = {0, 0, 0, 0}, rwTrqNs[4] = {0, 0, 0, 0}, torqueRws[4] = {0, 0, 0, 0},
          mgtDpDes[3] = {0, 0, 0};
+
   switch (mode) {
     case acs::PTG_IDLE:
-      guidance.targetQuatPtgSun(susDataProcessed.sunIjkModel.value, targetQuat, targetSatRotRate);
+      guidance.targetQuatPtgSun(now, susDataProcessed.sunIjkModel.value, targetQuat,
+                                targetSatRotRate);
       guidance.comparePtg(mekfData.quatMekf.value, mekfData.satRotRateMekf.value, targetQuat,
                           targetSatRotRate, errorQuat, errorSatRotRate, errorAngle);
       ptgCtrl.ptgLaw(&acsParameters.idleModeControllerParameters, errorQuat, errorSatRotRate,
                      *rwPseudoInv, torquePtgRws);
-      ptgCtrl.ptgNullspace(
-          &acsParameters.idleModeControllerParameters, &(sensorValues.rw1Set.currSpeed.value),
-          &(sensorValues.rw2Set.currSpeed.value), &(sensorValues.rw3Set.currSpeed.value),
-          &(sensorValues.rw4Set.currSpeed.value), rwTrqNs);
+      ptgCtrl.ptgNullspace(&acsParameters.idleModeControllerParameters,
+                           sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+                           sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value,
+                           rwTrqNs);
       VectorOperations<double>::add(torquePtgRws, rwTrqNs, torqueRws, 4);
       actuatorCmd.scalingTorqueRws(torqueRws, acsParameters.rwHandlingParameters.maxTrq);
       ptgCtrl.ptgDesaturation(
           &acsParameters.idleModeControllerParameters, mgmDataProcessed.mgmVecTot.value,
           mgmDataProcessed.mgmVecTot.isValid(), mekfData.satRotRateMekf.value,
-          &(sensorValues.rw1Set.currSpeed.value), &(sensorValues.rw2Set.currSpeed.value),
-          &(sensorValues.rw3Set.currSpeed.value), &(sensorValues.rw4Set.currSpeed.value), mgtDpDes);
+          sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+          sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value, mgtDpDes);
       enableAntiStiction = acsParameters.idleModeControllerParameters.enableAntiStiction;
       break;
 
@@ -395,17 +403,17 @@ void AcsController::performPointingCtrl() {
                           errorSatRotRate, errorAngle);
       ptgCtrl.ptgLaw(&acsParameters.targetModeControllerParameters, errorQuat, errorSatRotRate,
                      *rwPseudoInv, torquePtgRws);
-      ptgCtrl.ptgNullspace(
-          &acsParameters.targetModeControllerParameters, &(sensorValues.rw1Set.currSpeed.value),
-          &(sensorValues.rw2Set.currSpeed.value), &(sensorValues.rw3Set.currSpeed.value),
-          &(sensorValues.rw4Set.currSpeed.value), rwTrqNs);
+      ptgCtrl.ptgNullspace(&acsParameters.targetModeControllerParameters,
+                           sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+                           sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value,
+                           rwTrqNs);
       VectorOperations<double>::add(torquePtgRws, rwTrqNs, torqueRws, 4);
       actuatorCmd.scalingTorqueRws(torqueRws, acsParameters.rwHandlingParameters.maxTrq);
       ptgCtrl.ptgDesaturation(
           &acsParameters.targetModeControllerParameters, mgmDataProcessed.mgmVecTot.value,
           mgmDataProcessed.mgmVecTot.isValid(), mekfData.satRotRateMekf.value,
-          &(sensorValues.rw1Set.currSpeed.value), &(sensorValues.rw2Set.currSpeed.value),
-          &(sensorValues.rw3Set.currSpeed.value), &(sensorValues.rw4Set.currSpeed.value), mgtDpDes);
+          sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+          sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value, mgtDpDes);
       enableAntiStiction = acsParameters.targetModeControllerParameters.enableAntiStiction;
       break;
 
@@ -416,17 +424,17 @@ void AcsController::performPointingCtrl() {
                           targetSatRotRate, errorQuat, errorSatRotRate, errorAngle);
       ptgCtrl.ptgLaw(&acsParameters.gsTargetModeControllerParameters, errorQuat, errorSatRotRate,
                      *rwPseudoInv, torquePtgRws);
-      ptgCtrl.ptgNullspace(
-          &acsParameters.gsTargetModeControllerParameters, &(sensorValues.rw1Set.currSpeed.value),
-          &(sensorValues.rw2Set.currSpeed.value), &(sensorValues.rw3Set.currSpeed.value),
-          &(sensorValues.rw4Set.currSpeed.value), rwTrqNs);
+      ptgCtrl.ptgNullspace(&acsParameters.gsTargetModeControllerParameters,
+                           sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+                           sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value,
+                           rwTrqNs);
       VectorOperations<double>::add(torquePtgRws, rwTrqNs, torqueRws, 4);
       actuatorCmd.scalingTorqueRws(torqueRws, acsParameters.rwHandlingParameters.maxTrq);
       ptgCtrl.ptgDesaturation(
           &acsParameters.gsTargetModeControllerParameters, mgmDataProcessed.mgmVecTot.value,
           mgmDataProcessed.mgmVecTot.isValid(), mekfData.satRotRateMekf.value,
-          &(sensorValues.rw1Set.currSpeed.value), &(sensorValues.rw2Set.currSpeed.value),
-          &(sensorValues.rw3Set.currSpeed.value), &(sensorValues.rw4Set.currSpeed.value), mgtDpDes);
+          sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+          sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value, mgtDpDes);
       enableAntiStiction = acsParameters.gsTargetModeControllerParameters.enableAntiStiction;
       break;
 
@@ -440,63 +448,61 @@ void AcsController::performPointingCtrl() {
                           errorSatRotRate, errorAngle);
       ptgCtrl.ptgLaw(&acsParameters.nadirModeControllerParameters, errorQuat, errorSatRotRate,
                      *rwPseudoInv, torquePtgRws);
-      ptgCtrl.ptgNullspace(
-          &acsParameters.nadirModeControllerParameters, &(sensorValues.rw1Set.currSpeed.value),
-          &(sensorValues.rw2Set.currSpeed.value), &(sensorValues.rw3Set.currSpeed.value),
-          &(sensorValues.rw4Set.currSpeed.value), rwTrqNs);
+      ptgCtrl.ptgNullspace(&acsParameters.nadirModeControllerParameters,
+                           sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+                           sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value,
+                           rwTrqNs);
       VectorOperations<double>::add(torquePtgRws, rwTrqNs, torqueRws, 4);
       actuatorCmd.scalingTorqueRws(torqueRws, acsParameters.rwHandlingParameters.maxTrq);
       ptgCtrl.ptgDesaturation(
           &acsParameters.nadirModeControllerParameters, mgmDataProcessed.mgmVecTot.value,
           mgmDataProcessed.mgmVecTot.isValid(), mekfData.satRotRateMekf.value,
-          &(sensorValues.rw1Set.currSpeed.value), &(sensorValues.rw2Set.currSpeed.value),
-          &(sensorValues.rw3Set.currSpeed.value), &(sensorValues.rw4Set.currSpeed.value), mgtDpDes);
+          sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+          sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value, mgtDpDes);
       enableAntiStiction = acsParameters.nadirModeControllerParameters.enableAntiStiction;
       break;
 
     case acs::PTG_INERTIAL:
       std::memcpy(targetQuat, acsParameters.inertialModeControllerParameters.tgtQuat,
-                  4 * sizeof(double));
+                  sizeof(targetQuat));
       guidance.comparePtg(mekfData.quatMekf.value, mekfData.satRotRateMekf.value, targetQuat,
                           targetSatRotRate, acsParameters.inertialModeControllerParameters.quatRef,
                           acsParameters.inertialModeControllerParameters.refRotRate, errorQuat,
                           errorSatRotRate, errorAngle);
       ptgCtrl.ptgLaw(&acsParameters.inertialModeControllerParameters, errorQuat, errorSatRotRate,
                      *rwPseudoInv, torquePtgRws);
-      ptgCtrl.ptgNullspace(
-          &acsParameters.inertialModeControllerParameters, &(sensorValues.rw1Set.currSpeed.value),
-          &(sensorValues.rw2Set.currSpeed.value), &(sensorValues.rw3Set.currSpeed.value),
-          &(sensorValues.rw4Set.currSpeed.value), rwTrqNs);
+      ptgCtrl.ptgNullspace(&acsParameters.inertialModeControllerParameters,
+                           sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+                           sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value,
+                           rwTrqNs);
       VectorOperations<double>::add(torquePtgRws, rwTrqNs, torqueRws, 4);
       actuatorCmd.scalingTorqueRws(torqueRws, acsParameters.rwHandlingParameters.maxTrq);
       ptgCtrl.ptgDesaturation(
           &acsParameters.inertialModeControllerParameters, mgmDataProcessed.mgmVecTot.value,
           mgmDataProcessed.mgmVecTot.isValid(), mekfData.satRotRateMekf.value,
-          &(sensorValues.rw1Set.currSpeed.value), &(sensorValues.rw2Set.currSpeed.value),
-          &(sensorValues.rw3Set.currSpeed.value), &(sensorValues.rw4Set.currSpeed.value), mgtDpDes);
+          sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
+          sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value, mgtDpDes);
       enableAntiStiction = acsParameters.inertialModeControllerParameters.enableAntiStiction;
       break;
     default:
-      sif::error << "AcsController: Invalid mode for performPointingCtrl";
+      sif::error << "AcsController: Invalid mode for performPointingCtrl" << std::endl;
       break;
   }
 
   actuatorCmd.cmdSpeedToRws(
       sensorValues.rw1Set.currSpeed.value, sensorValues.rw2Set.currSpeed.value,
-      sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value, torqueRws,
-      cmdSpeedRws, acsParameters.onBoardParams.sampleTime,
-      acsParameters.rwHandlingParameters.maxRwSpeed,
-      acsParameters.rwHandlingParameters.inertiaWheel);
+      sensorValues.rw3Set.currSpeed.value, sensorValues.rw4Set.currSpeed.value,
+      acsParameters.onBoardParams.sampleTime, acsParameters.rwHandlingParameters.inertiaWheel,
+      acsParameters.rwHandlingParameters.maxRwSpeed, torqueRws, cmdSpeedRws);
   if (enableAntiStiction) {
     ptgCtrl.rwAntistiction(&sensorValues, cmdSpeedRws);
   }
-  actuatorCmd.cmdDipolMtq(mgtDpDes, cmdDipolMtqs,
-                          *acsParameters.magnetorquerParameter.inverseAlignment,
-                          acsParameters.magnetorquerParameter.dipolMax);
+  actuatorCmd.cmdDipoleMtq(*acsParameters.magnetorquerParameter.inverseAlignment,
+                           acsParameters.magnetorquerParameter.dipoleMax, mgtDpDes, cmdDipoleMtqs);
 
   updateCtrlValData(targetQuat, errorQuat, errorAngle, targetSatRotRate);
-  updateActuatorCmdData(torqueRws, cmdSpeedRws, cmdDipolMtqs);
-  commandActuators(cmdDipolMtqs[0], cmdDipolMtqs[1], cmdDipolMtqs[2],
+  updateActuatorCmdData(torqueRws, cmdSpeedRws, cmdDipoleMtqs);
+  commandActuators(cmdDipoleMtqs[0], cmdDipoleMtqs[1], cmdDipoleMtqs[2],
                    acsParameters.magnetorquerParameter.torqueDuration, cmdSpeedRws[0],
                    cmdSpeedRws[1], cmdSpeedRws[2], cmdSpeedRws[3],
                    acsParameters.rwHandlingParameters.rampTime);

mission/controller/AcsController.h

@@ -69,7 +69,7 @@ class AcsController : public ExtendedControllerBase, public ReceivesParameterMes
   bool mekfLost = false;
 
   int32_t cmdSpeedRws[4] = {0, 0, 0, 0};
-  int16_t cmdDipolMtqs[3] = {0, 0, 0};
+  int16_t cmdDipoleMtqs[3] = {0, 0, 0};
 
 #if OBSW_THREAD_TRACING == 1
   uint32_t opCounter = 0;

mission/controller/ThermalController.cpp

@@ -20,6 +20,8 @@
 #define LOWER_SYRLINKS_UPPER_LIMITS 0
 #define LOWER_EBAND_UPPER_LIMITS 0
 #define LOWER_PLOC_UPPER_LIMITS 0
+#define LOWER_MGT_UPPER_LIMITS 0
+#define LOWER_RW_UPPER_LIMITS 0
 
 ThermalController::ThermalController(object_id_t objectId, HeaterHandler& heater,
                                      const std::atomic_bool& tcsBoardShortUnavailable)
@@ -111,7 +113,7 @@ void ThermalController::performControlOperation() {
       break;
   }
 
-  if (cycles == 50) {
+  if (cycles == 40) {
     bool changedLimits = false;
 #if LOWER_SYRLINKS_UPPER_LIMITS == 1
     changedLimits = true;
@@ -130,9 +132,21 @@ void ThermalController::performControlOperation() {
     hpaLimits.cutOffLimit = 0;
     hpaLimits.opUpperLimit = 0;
     hpaLimits.nopUpperLimit = 0;
+#endif
+#if LOWER_MGT_UPPER_LIMITS == 1
+    changedLimits = true;
+    mgtLimits.cutOffLimit = 0;
+    mgtLimits.opUpperLimit = 0;
+    mgtLimits.nopUpperLimit = 0;
+#endif
+#if LOWER_RW_UPPER_LIMITS == 1
+    changedLimits = true;
+    rwLimits.cutOffLimit = 0;
+    rwLimits.opUpperLimit = 0;
+    rwLimits.nopUpperLimit = 0;
 #endif
     if (changedLimits) {
-      sif::debug << "ThermalController: changing limits" << std::endl;  // TODO: rausschmeissen
+      sif::debug << "ThermalController: changing limits" << std::endl;
     }
   }
 
@@ -161,7 +175,7 @@ void ThermalController::performControlOperation() {
   heaterHandler.getAllSwitchStates(heaterSwitchStateArray);
   {
     PoolReadGuard pg(&heaterInfo);
-    std::memcpy(heaterInfo.heaterSwitchState.value, heaterStates.data(), 8);
+    std::memcpy(heaterInfo.heaterSwitchState.value, heaterSwitchStateArray.data(), 8);
     {
       PoolReadGuard pg2(&currentVecPdu2);
       if (pg.getReadResult() == returnvalue::OK and pg2.getReadResult() == returnvalue::OK) {
@@ -988,7 +1002,7 @@ void ThermalController::copyDevices() {
 
 void ThermalController::ctrlAcsBoard() {
   heater::Switch switchNr = heater::HEATER_2_ACS_BRD;
-  heater::Switch redSwitchNr = heater::HEATER_0_OBC_BRD;
+  heater::Switch redSwitchNr = heater::HEATER_3_OBC_BRD;
 
   // A side
   thermalComponent = ACS_BOARD;
@@ -1053,9 +1067,14 @@ void ThermalController::ctrlMgt() {
   sensors[2].first = sensorTemperatures.plpcduHeatspreader.isValid();
   sensors[2].second = sensorTemperatures.plpcduHeatspreader.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_2_ACS_BRD, heater::HEATER_3_PCDU_PDU, mgtLimits);
+  HeaterContext htrCtx(heater::HEATER_2_ACS_BRD, heater::HEATER_1_PCDU_PDU, mgtLimits);
   ctrlComponentTemperature(htrCtx);
-  // TODO: trigger special event
+  if (componentAboveUpperLimit and not mgtTooHotFlag) {
+    triggerEvent(tcsCtrl::MGT_OVERHEATING, tempFloatToU32());
+    mgtTooHotFlag = true;
+  } else if (not componentAboveUpperLimit) {
+    mgtTooHotFlag = false;
+  }
 }
 
 void ThermalController::ctrlRw() {
@@ -1187,7 +1206,7 @@ void ThermalController::ctrlIfBoard() {
   sensors[2].first = deviceTemperatures.mgm2SideB.isValid();
   sensors[2].second = deviceTemperatures.mgm2SideB.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_2_ACS_BRD, heater::HEATER_3_PCDU_PDU, ifBoardLimits);
+  HeaterContext htrCtx(heater::HEATER_2_ACS_BRD, heater::HEATER_1_PCDU_PDU, ifBoardLimits);
   ctrlComponentTemperature(htrCtx);
   // TODO: special event overheating + could go back to safe mode
 }
@@ -1201,7 +1220,7 @@ void ThermalController::ctrlTcsBoard() {
   sensors[2].first = sensorTemperatures.tmp1075Tcs1.isValid();
   sensors[2].second = sensorTemperatures.tmp1075Tcs1.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_0_OBC_BRD, heater::HEATER_2_ACS_BRD, tcsBoardLimits);
+  HeaterContext htrCtx(heater::HEATER_3_OBC_BRD, heater::HEATER_2_ACS_BRD, tcsBoardLimits);
   ctrlComponentTemperature(htrCtx);
   // TODO: special event overheating + could go back to safe mode
 }
@@ -1215,7 +1234,7 @@ void ThermalController::ctrlObc() {
   sensors[2].first = sensorTemperatures.tmp1075Tcs0.isValid();
   sensors[2].second = sensorTemperatures.tmp1075Tcs0.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_0_OBC_BRD, heater::HEATER_2_ACS_BRD, obcLimits);
+  HeaterContext htrCtx(heater::HEATER_3_OBC_BRD, heater::HEATER_2_ACS_BRD, obcLimits);
   ctrlComponentTemperature(htrCtx);
   if (componentAboveUpperLimit and not obcTooHotFlag) {
     triggerEvent(tcsCtrl::OBC_OVERHEATING, tempFloatToU32());
@@ -1234,13 +1253,13 @@ void ThermalController::ctrlObcIfBoard() {
   sensors[2].first = sensorTemperatures.tmp1075Tcs1.isValid();
   sensors[2].second = sensorTemperatures.tmp1075Tcs1.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_0_OBC_BRD, heater::HEATER_2_ACS_BRD, obcIfBoardLimits);
+  HeaterContext htrCtx(heater::HEATER_3_OBC_BRD, heater::HEATER_2_ACS_BRD, obcIfBoardLimits);
   ctrlComponentTemperature(htrCtx);
   if (componentAboveUpperLimit and not obcTooHotFlag) {
     triggerEvent(tcsCtrl::OBC_OVERHEATING, tempFloatToU32());
     obcTooHotFlag = true;
   } else if (not componentAboveUpperLimit) {
-    obcTooHotFlag = false;  // TODO: !!
+    obcTooHotFlag = false;
   }
 }
 
@@ -1269,7 +1288,7 @@ void ThermalController::ctrlPcduP60Board() {
   sensors[1].first = deviceTemperatures.temp2P60dock.isValid();
   sensors[1].second = deviceTemperatures.temp2P60dock.value;
   numSensors = 2;
-  HeaterContext htrCtx(heater::HEATER_3_PCDU_PDU, heater::HEATER_2_ACS_BRD, pcduP60BoardLimits);
+  HeaterContext htrCtx(heater::HEATER_1_PCDU_PDU, heater::HEATER_2_ACS_BRD, pcduP60BoardLimits);
   ctrlComponentTemperature(htrCtx);
   if (componentAboveUpperLimit and not pcduSystemTooHotFlag) {
     triggerEvent(tcsCtrl::PCDU_SYSTEM_OVERHEATING, tempFloatToU32());
@@ -1281,7 +1300,7 @@ void ThermalController::ctrlPcduP60Board() {
 
 void ThermalController::ctrlPcduAcu() {
   thermalComponent = PCDUACU;
-  heater::Switch switchNr = heater::HEATER_3_PCDU_PDU;
+  heater::Switch switchNr = heater::HEATER_1_PCDU_PDU;
   heater::Switch redSwitchNr = heater::HEATER_2_ACS_BRD;
 
   if (chooseHeater(switchNr, redSwitchNr)) {
@@ -1321,7 +1340,7 @@ void ThermalController::ctrlPcduPdu() {
   sensors[2].first = sensorTemperatures.tmp1075Tcs0.isValid();
   sensors[2].second = sensorTemperatures.tmp1075Tcs0.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_3_PCDU_PDU, heater::HEATER_2_ACS_BRD, pcduPduLimits);
+  HeaterContext htrCtx(heater::HEATER_1_PCDU_PDU, heater::HEATER_2_ACS_BRD, pcduPduLimits);
   ctrlComponentTemperature(htrCtx);
   if (componentAboveUpperLimit and not pcduSystemTooHotFlag) {
     triggerEvent(tcsCtrl::PCDU_SYSTEM_OVERHEATING, tempFloatToU32());
@@ -1342,7 +1361,7 @@ void ThermalController::ctrlPlPcduBoard() {
   sensors[3].first = sensorTemperatures.plpcduHeatspreader.isValid();
   sensors[3].second = sensorTemperatures.plpcduHeatspreader.value;
   numSensors = 4;
-  HeaterContext htrCtx(heater::HEATER_3_PCDU_PDU, heater::HEATER_2_ACS_BRD, plPcduBoardLimits);
+  HeaterContext htrCtx(heater::HEATER_1_PCDU_PDU, heater::HEATER_2_ACS_BRD, plPcduBoardLimits);
   ctrlComponentTemperature(htrCtx);
   tooHotHandler(objects::PLPCDU_HANDLER, eBandTooHotFlag);
 }
@@ -1356,7 +1375,7 @@ void ThermalController::ctrlPlocMissionBoard() {
   sensors[2].first = sensorTemperatures.dacHeatspreader.isValid();
   sensors[2].second = sensorTemperatures.dacHeatspreader.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_1_PLOC_PROC_BRD, heater::HEATER_0_OBC_BRD,
+  HeaterContext htrCtx(heater::HEATER_0_PLOC_PROC_BRD, heater::HEATER_3_OBC_BRD,
                        plocMissionBoardLimits);
   ctrlComponentTemperature(htrCtx);
   tooHotHandler(objects::PLOC_SUPERVISOR_HANDLER, plocTooHotFlag);
@@ -1371,7 +1390,7 @@ void ThermalController::ctrlPlocProcessingBoard() {
   sensors[2].first = sensorTemperatures.dacHeatspreader.isValid();
   sensors[2].second = sensorTemperatures.dacHeatspreader.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_1_PLOC_PROC_BRD, heater::HEATER_0_OBC_BRD,
+  HeaterContext htrCtx(heater::HEATER_0_PLOC_PROC_BRD, heater::HEATER_3_OBC_BRD,
                        plocProcessingBoardLimits);
   ctrlComponentTemperature(htrCtx);
   tooHotHandler(objects::PLOC_SUPERVISOR_HANDLER, plocTooHotFlag);
@@ -1386,7 +1405,7 @@ void ThermalController::ctrlDac() {
   sensors[2].first = sensorTemperatures.plocHeatspreader.isValid();
   sensors[2].second = sensorTemperatures.plocHeatspreader.value;
   numSensors = 3;
-  HeaterContext htrCtx(heater::HEATER_1_PLOC_PROC_BRD, heater::HEATER_0_OBC_BRD, dacLimits);
+  HeaterContext htrCtx(heater::HEATER_0_PLOC_PROC_BRD, heater::HEATER_3_OBC_BRD, dacLimits);
   ctrlComponentTemperature(htrCtx);
   tooHotHandler(objects::PLPCDU_HANDLER, eBandTooHotFlag);
 }
@@ -1612,13 +1631,18 @@ bool ThermalController::selectAndReadSensorTemp(HeaterContext& htrCtx) {
 bool ThermalController::chooseHeater(heater::Switch& switchNr, heater::Switch redSwitchNr) {
   bool heaterAvailable = true;
 
-  if (heaterHandler.getHealth(switchNr) != HasHealthIF::HEALTHY) {
-    if (heaterHandler.getHealth(redSwitchNr) == HasHealthIF::HEALTHY) {
+  HasHealthIF::HealthState mainHealth = heaterHandler.getHealth(switchNr);
+  HasHealthIF::HealthState redHealth = heaterHandler.getHealth(redSwitchNr);
+  if (mainHealth != HasHealthIF::HEALTHY) {
+    if (redHealth == HasHealthIF::HEALTHY) {
       switchNr = redSwitchNr;
       redSwitchNrInUse = true;
     } else {
       heaterAvailable = false;
-      triggerEvent(tcsCtrl::NO_HEALTHY_HEATER_AVAILABLE, switchNr, redSwitchNr);
+      // Special case: Ground might command/do something with the heaters, so prevent spam.
+      if (not(mainHealth == EXTERNAL_CONTROL and redHealth == EXTERNAL_CONTROL)) {
+        triggerEvent(tcsCtrl::NO_HEALTHY_HEATER_AVAILABLE, switchNr, redSwitchNr);
+      }
     }
   } else {
     redSwitchNrInUse = false;

mission/controller/ThermalController.h

@@ -267,6 +267,7 @@ class ThermalController : public ExtendedControllerBase {
   bool pcduSystemTooHotFlag = false;
   bool syrlinksTooHotFlag = false;
   bool obcTooHotFlag = false;
+  bool mgtTooHotFlag = false;
   bool strTooHotFlag = false;
   bool rwTooHotFlag = false;
 

mission/controller/acs/AcsParameters.cpp

@@ -221,6 +221,9 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
         case 0x23:
           parameterWrapper->setMatrix(susHandlingParameters.sus11coeffBeta);
           break;
+        case 0x24:
+          parameterWrapper->set(susHandlingParameters.susBrightnessThreshold);
+          break;
         default:
           return INVALID_IDENTIFIER_ID;
       }
@@ -290,6 +293,9 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
         case 0x6:
           parameterWrapper->set(rwHandlingParameters.rampTime);
           break;
+        case 0x7:
+          parameterWrapper->set(rwHandlingParameters.multipleRwInvalidTimeout);
+          break;
         default:
           return INVALID_IDENTIFIER_ID;
       }
@@ -315,7 +321,7 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
           parameterWrapper->setMatrix(rwMatrices.without4);
           break;
         case 0x6:
-          parameterWrapper->setVector(rwMatrices.nullspace);
+          parameterWrapper->setVector(rwMatrices.nullspaceVector);
           break;
         default:
           return INVALID_IDENTIFIER_ID;
@@ -375,15 +381,18 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
           parameterWrapper->set(idleModeControllerParameters.gainNullspace);
           break;
         case 0x5:
-          parameterWrapper->setVector(idleModeControllerParameters.desatMomentumRef);
+          parameterWrapper->set(idleModeControllerParameters.nullspaceSpeed);
           break;
         case 0x6:
-          parameterWrapper->set(idleModeControllerParameters.deSatGainFactor);
+          parameterWrapper->setVector(idleModeControllerParameters.desatMomentumRef);
           break;
         case 0x7:
-          parameterWrapper->set(idleModeControllerParameters.desatOn);
+          parameterWrapper->set(idleModeControllerParameters.deSatGainFactor);
           break;
         case 0x8:
+          parameterWrapper->set(idleModeControllerParameters.desatOn);
+          break;
+        case 0x9:
           parameterWrapper->set(idleModeControllerParameters.enableAntiStiction);
           break;
         default:
@@ -408,48 +417,51 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
           parameterWrapper->set(targetModeControllerParameters.gainNullspace);
           break;
         case 0x5:
-          parameterWrapper->setVector(targetModeControllerParameters.desatMomentumRef);
+          parameterWrapper->set(targetModeControllerParameters.nullspaceSpeed);
           break;
         case 0x6:
-          parameterWrapper->set(targetModeControllerParameters.deSatGainFactor);
+          parameterWrapper->setVector(targetModeControllerParameters.desatMomentumRef);
           break;
         case 0x7:
-          parameterWrapper->set(targetModeControllerParameters.desatOn);
+          parameterWrapper->set(targetModeControllerParameters.deSatGainFactor);
           break;
         case 0x8:
-          parameterWrapper->set(targetModeControllerParameters.enableAntiStiction);
+          parameterWrapper->set(targetModeControllerParameters.desatOn);
           break;
         case 0x9:
-          parameterWrapper->setVector(targetModeControllerParameters.refDirection);
+          parameterWrapper->set(targetModeControllerParameters.enableAntiStiction);
           break;
         case 0xA:
-          parameterWrapper->setVector(targetModeControllerParameters.refRotRate);
+          parameterWrapper->setVector(targetModeControllerParameters.refDirection);
           break;
         case 0xB:
-          parameterWrapper->setVector(targetModeControllerParameters.quatRef);
+          parameterWrapper->setVector(targetModeControllerParameters.refRotRate);
           break;
         case 0xC:
-          parameterWrapper->set(targetModeControllerParameters.timeElapsedMax);
+          parameterWrapper->setVector(targetModeControllerParameters.quatRef);
           break;
         case 0xD:
-          parameterWrapper->set(targetModeControllerParameters.latitudeTgt);
+          parameterWrapper->set(targetModeControllerParameters.timeElapsedMax);
           break;
         case 0xE:
-          parameterWrapper->set(targetModeControllerParameters.longitudeTgt);
+          parameterWrapper->set(targetModeControllerParameters.latitudeTgt);
           break;
         case 0xF:
-          parameterWrapper->set(targetModeControllerParameters.altitudeTgt);
+          parameterWrapper->set(targetModeControllerParameters.longitudeTgt);
           break;
         case 0x10:
-          parameterWrapper->set(targetModeControllerParameters.avoidBlindStr);
+          parameterWrapper->set(targetModeControllerParameters.altitudeTgt);
           break;
         case 0x11:
-          parameterWrapper->set(targetModeControllerParameters.blindAvoidStart);
+          parameterWrapper->set(targetModeControllerParameters.avoidBlindStr);
           break;
         case 0x12:
-          parameterWrapper->set(targetModeControllerParameters.blindAvoidStop);
+          parameterWrapper->set(targetModeControllerParameters.blindAvoidStart);
           break;
         case 0x13:
+          parameterWrapper->set(targetModeControllerParameters.blindAvoidStop);
+          break;
+        case 0x14:
           parameterWrapper->set(targetModeControllerParameters.blindRotRate);
           break;
         default:
@@ -474,30 +486,33 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
           parameterWrapper->set(gsTargetModeControllerParameters.gainNullspace);
           break;
         case 0x5:
-          parameterWrapper->setVector(gsTargetModeControllerParameters.desatMomentumRef);
+          parameterWrapper->set(gsTargetModeControllerParameters.nullspaceSpeed);
           break;
         case 0x6:
-          parameterWrapper->set(gsTargetModeControllerParameters.deSatGainFactor);
+          parameterWrapper->setVector(gsTargetModeControllerParameters.desatMomentumRef);
           break;
         case 0x7:
-          parameterWrapper->set(gsTargetModeControllerParameters.desatOn);
+          parameterWrapper->set(gsTargetModeControllerParameters.deSatGainFactor);
           break;
         case 0x8:
-          parameterWrapper->set(gsTargetModeControllerParameters.enableAntiStiction);
+          parameterWrapper->set(gsTargetModeControllerParameters.desatOn);
           break;
         case 0x9:
-          parameterWrapper->setVector(gsTargetModeControllerParameters.refDirection);
+          parameterWrapper->set(gsTargetModeControllerParameters.enableAntiStiction);
           break;
         case 0xA:
-          parameterWrapper->set(gsTargetModeControllerParameters.timeElapsedMax);
+          parameterWrapper->setVector(gsTargetModeControllerParameters.refDirection);
           break;
         case 0xB:
-          parameterWrapper->set(gsTargetModeControllerParameters.latitudeTgt);
+          parameterWrapper->set(gsTargetModeControllerParameters.timeElapsedMax);
           break;
         case 0xC:
-          parameterWrapper->set(gsTargetModeControllerParameters.longitudeTgt);
+          parameterWrapper->set(gsTargetModeControllerParameters.latitudeTgt);
           break;
         case 0xD:
+          parameterWrapper->set(gsTargetModeControllerParameters.longitudeTgt);
+          break;
+        case 0xE:
           parameterWrapper->set(gsTargetModeControllerParameters.altitudeTgt);
           break;
         default:
@@ -522,24 +537,30 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
           parameterWrapper->set(nadirModeControllerParameters.gainNullspace);
           break;
         case 0x5:
-          parameterWrapper->setVector(nadirModeControllerParameters.desatMomentumRef);
+          parameterWrapper->set(nadirModeControllerParameters.nullspaceSpeed);
           break;
         case 0x6:
-          parameterWrapper->set(nadirModeControllerParameters.deSatGainFactor);
+          parameterWrapper->setVector(nadirModeControllerParameters.desatMomentumRef);
           break;
         case 0x7:
-          parameterWrapper->set(nadirModeControllerParameters.desatOn);
+          parameterWrapper->set(nadirModeControllerParameters.deSatGainFactor);
           break;
         case 0x8:
-          parameterWrapper->set(nadirModeControllerParameters.enableAntiStiction);
+          parameterWrapper->set(nadirModeControllerParameters.desatOn);
           break;
         case 0x9:
-          parameterWrapper->setVector(nadirModeControllerParameters.refDirection);
+          parameterWrapper->set(nadirModeControllerParameters.enableAntiStiction);
           break;
         case 0xA:
+          parameterWrapper->setVector(nadirModeControllerParameters.refDirection);
+          break;
+        case 0xB:
           parameterWrapper->setVector(nadirModeControllerParameters.quatRef);
           break;
         case 0xC:
+          parameterWrapper->setVector(nadirModeControllerParameters.refRotRate);
+          break;
+        case 0xD:
           parameterWrapper->set(nadirModeControllerParameters.timeElapsedMax);
           break;
         default:
@@ -564,21 +585,24 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
           parameterWrapper->set(inertialModeControllerParameters.gainNullspace);
           break;
         case 0x5:
-          parameterWrapper->setVector(inertialModeControllerParameters.desatMomentumRef);
+          parameterWrapper->set(inertialModeControllerParameters.nullspaceSpeed);
           break;
         case 0x6:
-          parameterWrapper->set(inertialModeControllerParameters.deSatGainFactor);
+          parameterWrapper->setVector(inertialModeControllerParameters.desatMomentumRef);
           break;
         case 0x7:
-          parameterWrapper->set(inertialModeControllerParameters.desatOn);
+          parameterWrapper->set(inertialModeControllerParameters.deSatGainFactor);
           break;
         case 0x8:
-          parameterWrapper->set(inertialModeControllerParameters.enableAntiStiction);
+          parameterWrapper->set(inertialModeControllerParameters.desatOn);
           break;
         case 0x9:
-          parameterWrapper->setVector(inertialModeControllerParameters.tgtQuat);
+          parameterWrapper->set(inertialModeControllerParameters.enableAntiStiction);
           break;
         case 0xA:
+          parameterWrapper->setVector(inertialModeControllerParameters.tgtQuat);
+          break;
+        case 0xB:
           parameterWrapper->setVector(inertialModeControllerParameters.refRotRate);
           break;
         case 0xC:
@@ -690,7 +714,7 @@ ReturnValue_t AcsParameters::getParameter(uint8_t domainId, uint8_t parameterId,
           parameterWrapper->setMatrix(magnetorquerParameter.inverseAlignment);
           break;
         case 0x5:
-          parameterWrapper->set(magnetorquerParameter.dipolMax);
+          parameterWrapper->set(magnetorquerParameter.dipoleMax);
           break;
         case 0x6:
           parameterWrapper->set(magnetorquerParameter.torqueDuration);

mission/controller/acs/AcsParameters.h

@@ -766,6 +766,7 @@ class AcsParameters : public HasParametersIF {
         {116.975421945286, -5.53022680362263, -5.61081660666997, 0.109754904982136,
          0.167666815691513, 0.163137400730063, -0.000609874123906977, -0.00205336098697513,
          -0.000889232196185857, -0.00168429567131815}};
+    float susBrightnessThreshold = 0.7;
   } susHandlingParameters;
 
   struct GyrHandlingParameters {
@@ -781,9 +782,9 @@ class AcsParameters : public HasParametersIF {
 
     /* var = sigma^2, sigma = RND*sqrt(freq), following values are RND^2 and not var as freq is
      * assumed to be equal for the same class of sensors */
-    float gyr02variance[3] = {pow(3.0e-3, 2),   // RND_x = 3.0e-3 deg/s/sqrt(Hz) rms
-                              pow(3.0e-3, 2),   // RND_y = 3.0e-3 deg/s/sqrt(Hz) rms
-                              pow(4.3e-3, 2)};  // RND_z = 4.3e-3 deg/s/sqrt(Hz) rms
+    float gyr02variance[3] = {pow(4.6e-3, 2),   // RND_x = 3.0e-3 deg/s/sqrt(Hz) rms
+                              pow(4.6e-3, 2),   // RND_y = 3.0e-3 deg/s/sqrt(Hz) rms
+                              pow(6.1e-3, 2)};  // RND_z = 4.3e-3 deg/s/sqrt(Hz) rms
     float gyr13variance[3] = {pow(11e-3, 2), pow(11e-3, 2), pow(11e-3, 2)};
     uint8_t preferAdis = false;
     float gyrFilterWeight = 0.6;
@@ -798,6 +799,8 @@ class AcsParameters : public HasParametersIF {
     double stictionTorque = 0.0006;
 
     uint16_t rampTime = 10;
+
+    uint32_t multipleRwInvalidTimeout = 25;
   } rwHandlingParameters;
 
   struct RwMatrices {
@@ -814,7 +817,7 @@ class AcsParameters : public HasParametersIF {
         {1.0864, 0, 0}, {-0.5432, -0.5432, 1.2797}, {0, 0, 0}, {-0.5432, 0.5432, 1.2797}};
     double without4[4][3] = {
         {0.5432, 0.5432, 1.2797}, {0, -1.0864, 0}, {-0.5432, 0.5432, 1.2797}, {0, 0, 0}};
-    double nullspace[4] = {-0.5000, 0.5000, -0.5000, 0.5000};
+    double nullspaceVector[4] = {-1, 1, -1, 1};
   } rwMatrices;
 
   struct SafeModeControllerParameters {
@@ -838,7 +841,9 @@ class AcsParameters : public HasParametersIF {
     double om = 0.3;
     double omMax = 1 * M_PI / 180;
     double qiMin = 0.1;
+
     double gainNullspace = 0.01;
+    double nullspaceSpeed = 32500;  // 0.1 RPM
 
     double desatMomentumRef[3] = {0, 0, 0};
     double deSatGainFactor = 1000;
@@ -931,7 +936,7 @@ class AcsParameters : public HasParametersIF {
     double mtq2orientationMatrix[3][3] = {{0, 0, 1}, {0, 1, 0}, {-1, 0, 0}};
     double alignmentMatrixMtq[3][3] = {{0, 0, -1}, {-1, 0, 0}, {0, 1, 0}};
     double inverseAlignment[3][3] = {{0, -1, 0}, {0, 0, 1}, {-1, 0, 0}};
-    double dipolMax = 0.2;  // [Am^2]
+    double dipoleMax = 0.2;  // [Am^2]
 
     uint16_t torqueDuration = 300;  // [ms]
   } magnetorquerParameter;

mission/controller/acs/ActuatorCmd.cpp

@@ -5,11 +5,6 @@
 #include <fsfw/globalfunctions/math/QuaternionOperations.h>
 #include <fsfw/globalfunctions/math/VectorOperations.h>
 
-#include <cmath>
-
-#include "util/CholeskyDecomposition.h"
-#include "util/MathOperations.h"
-
 ActuatorCmd::ActuatorCmd() {}
 
 ActuatorCmd::~ActuatorCmd() {}
@@ -25,24 +20,30 @@ void ActuatorCmd::scalingTorqueRws(double *rwTrq, double maxTorque) {
   }
 }
 
-void ActuatorCmd::cmdSpeedToRws(int32_t speedRw0, int32_t speedRw1, int32_t speedRw2,
-                                int32_t speedRw3, const double *rwTorque, int32_t *rwCmdSpeed,
-                                double sampleTime, int32_t maxRwSpeed, double inertiaWheel) {
-  using namespace Math;
-
-  // Calculating the commanded speed in RPM for every reaction wheel
+void ActuatorCmd::cmdSpeedToRws(const int32_t speedRw0, const int32_t speedRw1,
+                                const int32_t speedRw2, const int32_t speedRw3,
+                                const double sampleTime, const double inertiaWheel,
+                                const int32_t maxRwSpeed, const double *rwTorque,
+                                int32_t *rwCmdSpeed) {
+  // group RW speed values (in 0.1 [RPM]) in vector
   int32_t speedRws[4] = {speedRw0, speedRw1, speedRw2, speedRw3};
+
+  // calculate required RW speed as sum of current RW speed and RW speed delta
+  // delta w_rw = delta t / I_RW * torque_RW [rad/s]
   double deltaSpeed[4] = {0, 0, 0, 0};
-  double radToRpm = 60 / (2 * PI);  // factor for conversion to RPM
-  //	 W_RW = Torque_RW / I_RW * delta t [rad/s]
-  double factor = sampleTime / inertiaWheel * radToRpm;
-  int32_t deltaSpeedInt[4] = {0, 0, 0, 0};
+  const double factor = sampleTime / inertiaWheel * RAD_PER_SEC_TO_RPM * 10;
   VectorOperations<double>::mulScalar(rwTorque, factor, deltaSpeed, 4);
+
+  // convert double to int32
+  int32_t deltaSpeedInt[4] = {0, 0, 0, 0};
   for (int i = 0; i < 4; i++) {
     deltaSpeedInt[i] = std::round(deltaSpeed[i]);
   }
+
+  // sum of current RW speed and RW speed delta
   VectorOperations<int32_t>::add(speedRws, deltaSpeedInt, rwCmdSpeed, 4);
-  VectorOperations<int32_t>::mulScalar(rwCmdSpeed, 10, rwCmdSpeed, 4);
+
+  // crop values which would exceed the maximum possible RPM
   for (uint8_t i = 0; i < 4; i++) {
     if (rwCmdSpeed[i] > maxRwSpeed) {
       rwCmdSpeed[i] = maxRwSpeed;
@@ -52,24 +53,25 @@ void ActuatorCmd::cmdSpeedToRws(int32_t speedRw0, int32_t speedRw1, int32_t spee
   }
 }
 
-void ActuatorCmd::cmdDipolMtq(const double *dipolMoment, int16_t *dipolMomentActuator,
-                              const double *inverseAlignment, double maxDipol) {
-  // Convert to actuator frame
-  double dipolMomentActuatorDouble[3] = {0, 0, 0};
-  MatrixOperations<double>::multiply(inverseAlignment, dipolMoment, dipolMomentActuatorDouble, 3, 3,
-                                     1);
-  // Scaling along largest element if dipol exceeds maximum
+void ActuatorCmd::cmdDipoleMtq(const double *inverseAlignment, const double maxDipole,
+                               const double *dipoleMoment, int16_t *dipoleMomentActuator) {
+  // convert to actuator frame
+  double dipoleMomentActuatorDouble[3] = {0, 0, 0};
+  MatrixOperations<double>::multiply(inverseAlignment, dipoleMoment, dipoleMomentActuatorDouble, 3,
+                                     3, 1);
+  // scaling along largest element if dipole exceeds maximum
   uint8_t maxIdx = 0;
-  VectorOperations<double>::maxAbsValue(dipolMomentActuatorDouble, 3, &maxIdx);
-  double maxAbsValue = abs(dipolMomentActuatorDouble[maxIdx]);
-  if (maxAbsValue > maxDipol) {
-    double scalingFactor = maxDipol / maxAbsValue;
-    VectorOperations<double>::mulScalar(dipolMomentActuatorDouble, scalingFactor,
-                                        dipolMomentActuatorDouble, 3);
+  VectorOperations<double>::maxAbsValue(dipoleMomentActuatorDouble, 3, &maxIdx);
+  double maxAbsValue = std::abs(dipoleMomentActuatorDouble[maxIdx]);
+  if (maxAbsValue > maxDipole) {
+    double scalingFactor = maxDipole / maxAbsValue;
+    VectorOperations<double>::mulScalar(dipoleMomentActuatorDouble, scalingFactor,
+                                        dipoleMomentActuatorDouble, 3);
   }
   // scale dipole from 1 Am^2 to 1e^-4 Am^2
-  VectorOperations<double>::mulScalar(dipolMomentActuatorDouble, 1e4, dipolMomentActuatorDouble, 3);
+  VectorOperations<double>::mulScalar(dipoleMomentActuatorDouble, 1e4, dipoleMomentActuatorDouble,
+                                      3);
   for (int i = 0; i < 3; i++) {
-    dipolMomentActuator[i] = std::round(dipolMomentActuatorDouble[i]);
+    dipoleMomentActuator[i] = std::round(dipoleMomentActuatorDouble[i]);
   }
 }

mission/controller/acs/ActuatorCmd.h

@@ -1,9 +1,7 @@
 #ifndef ACTUATORCMD_H_
 #define ACTUATORCMD_H_
 
-#include "MultiplicativeKalmanFilter.h"
-#include "SensorProcessing.h"
-#include "SensorValues.h"
+#include <cmath>
 
 class ActuatorCmd {
  public:
@@ -19,29 +17,30 @@ class ActuatorCmd {
   void scalingTorqueRws(double *rwTrq, double maxTorque);
 
   /*
-   * @brief:	cmdSpeedToRws()		will set the maximum possible torque for the reaction
-   * wheels, also will calculate the needed revolutions per minute for the RWs, which will be given
-   * as Input to the RWs
-   * @param:	rwTrqIn 			given torque from pointing controller
-   * 			rwTrqNS				Nullspace torque
+   * @brief:	cmdSpeedToRws()		Calculates the RPM for the reaction wheel configuration,
+   * given the required torque calculated by the controller. Will also scale down the RPM of the
+   * wheels if they exceed the maximum possible RPM
+   * @param:	rwTrq 			    given torque from pointing controller
    * 			rwCmdSpeed			output revolutions per minute for every
    * reaction wheel
    */
-  void cmdSpeedToRws(int32_t speedRw0, int32_t speedRw1, int32_t speedRw2, int32_t speedRw3,
-                     const double *rwTorque, int32_t *rwCmdSpeed, double sampleTime,
-                     int32_t maxRwSpeed, double inertiaWheel);
+  void cmdSpeedToRws(const int32_t speedRw0, const int32_t speedRw1, const int32_t speedRw2,
+                     const int32_t speedRw3, const double sampleTime, const double inertiaWheel,
+                     const int32_t maxRwSpeed, const double *rwTorque, int32_t *rwCmdSpeed);
 
   /*
-   * @brief:	cmdDipolMtq()		gives the commanded dipol moment for the magnetorques
+   * @brief:	cmdDipoleMtq()			gives the commanded dipole moment for the
+   * magnetorquer
    *
-   * @param:	dipolMoment 		given dipol moment in spacecraft frame
-   * 			dipolMomentActuator	resulting dipol moment in actuator reference frame
+   * @param:	dipoleMoment 			given dipole moment in spacecraft frame
+   * 			dipoleMomentActuator	resulting dipole moment in actuator reference frame
    */
-  void cmdDipolMtq(const double *dipolMoment, int16_t *dipolMomentActuator,
-                   const double *inverseAlignment, double maxDipol);
+  void cmdDipoleMtq(const double *inverseAlignment, const double maxDipole,
+                    const double *dipoleMoment, int16_t *dipoleMomentActuator);
 
  protected:
  private:
+  static constexpr double RAD_PER_SEC_TO_RPM = 60 / (2 * M_PI);
 };
 
 #endif /* ACTUATORCMD_H_ */

mission/controller/acs/Guidance.cpp

@@ -266,7 +266,8 @@ void Guidance::targetQuatPtgGs(timeval now, double posSatE[3], double sunDirI[3]
   targetRotationRate(timeElapsedMax, now, targetQuat, targetSatRotRate);
 }
 
-void Guidance::targetQuatPtgSun(double sunDirI[3], double targetQuat[4], double refSatRate[3]) {
+void Guidance::targetQuatPtgSun(timeval now, double sunDirI[3], double targetQuat[4],
+                                double targetSatRotRate[3]) {
   //-------------------------------------------------------------------------------------
   //	Calculation of target quaternion to sun
   //-------------------------------------------------------------------------------------
@@ -296,9 +297,8 @@ void Guidance::targetQuatPtgSun(double sunDirI[3], double targetQuat[4], double
   //----------------------------------------------------------------------------
   //	Calculation of reference rotation rate
   //----------------------------------------------------------------------------
-  refSatRate[0] = 0;
-  refSatRate[1] = 0;
-  refSatRate[2] = 0;
+  int8_t timeElapsedMax = acsParameters->gsTargetModeControllerParameters.timeElapsedMax;
+  targetRotationRate(timeElapsedMax, now, targetQuat, targetSatRotRate);
 }
 
 void Guidance::targetQuatPtgNadirSingleAxis(timeval now, double posSatE[3], double quatBI[4],
@@ -412,7 +412,7 @@ void Guidance::targetQuatPtgNadirThreeAxes(timeval now, double posSatE[3], doubl
 
 void Guidance::comparePtg(double currentQuat[4], double currentSatRotRate[3], double targetQuat[4],
                           double targetSatRotRate[3], double refQuat[4], double refSatRotRate[3],
-                          double errorQuat[4], double errorSatRotRate[3], double errorAngle) {
+                          double errorQuat[4], double errorSatRotRate[3], double &errorAngle) {
   // First calculate error quaternion between current and target orientation
   QuaternionOperations::multiply(currentQuat, targetQuat, errorQuat);
   // Last calculate add rotation from reference quaternion
@@ -424,26 +424,17 @@ void Guidance::comparePtg(double currentQuat[4], double currentSatRotRate[3], do
   // Calculate error angle
   errorAngle = QuaternionOperations::getAngle(errorQuat, true);
 
-  // Only give back error satellite rotational rate if orientation has already been aquired
-  if (errorAngle < 2. / 180. * M_PI) {
-    // First combine the target and reference satellite rotational rates
-    double combinedRefSatRotRate[3] = {0, 0, 0};
-    VectorOperations<double>::add(targetSatRotRate, refSatRotRate, combinedRefSatRotRate, 3);
-    // Then substract the combined required satellite rotational rates from the actual rate
-    VectorOperations<double>::subtract(currentSatRotRate, combinedRefSatRotRate, errorSatRotRate,
-                                       3);
-  } else {
-    // If orientation has not been aquired yet set satellite rotational rate to zero
-    errorSatRotRate = 0;
-  }
-
-  // target flag in matlab, importance, does look like it only gives feedback if pointing control is
-  // under 150 arcsec ??
+  // Calculate error satellite rotational rate
+  // First combine the target and reference satellite rotational rates
+  double combinedRefSatRotRate[3] = {0, 0, 0};
+  VectorOperations<double>::add(targetSatRotRate, refSatRotRate, combinedRefSatRotRate, 3);
+  // Then subtract the combined required satellite rotational rates from the actual rate
+  VectorOperations<double>::subtract(currentSatRotRate, combinedRefSatRotRate, errorSatRotRate, 3);
 }
 
 void Guidance::comparePtg(double currentQuat[4], double currentSatRotRate[3], double targetQuat[4],
                           double targetSatRotRate[3], double errorQuat[4],
-                          double errorSatRotRate[3], double errorAngle) {
+                          double errorSatRotRate[3], double &errorAngle) {
   // First calculate error quaternion between current and target orientation
   QuaternionOperations::multiply(currentQuat, targetQuat, errorQuat);
   // Keep scalar part of quaternion positive
@@ -453,17 +444,8 @@ void Guidance::comparePtg(double currentQuat[4], double currentSatRotRate[3], do
   // Calculate error angle
   errorAngle = QuaternionOperations::getAngle(errorQuat, true);
 
-  // Only give back error satellite rotational rate if orientation has already been aquired
-  if (errorAngle < 2. / 180. * M_PI) {
-    // Then substract the combined required satellite rotational rates from the actual rate
-    VectorOperations<double>::subtract(currentSatRotRate, targetSatRotRate, errorSatRotRate, 3);
-  } else {
-    // If orientation has not been aquired yet set satellite rotational rate to zero
-    errorSatRotRate = 0;
-  }
-
-  // target flag in matlab, importance, does look like it only gives feedback if pointing control is
-  // under 150 arcsec ??
+  // Calculate error satellite rotational rate
+  VectorOperations<double>::subtract(currentSatRotRate, targetSatRotRate, errorSatRotRate, 3);
 }
 
 void Guidance::targetRotationRate(int8_t timeElapsedMax, timeval now, double quatInertialTarget[4],
@@ -471,20 +453,25 @@ void Guidance::targetRotationRate(int8_t timeElapsedMax, timeval now, double qua
   //-------------------------------------------------------------------------------------
   //	Calculation of target rotation rate
   //-------------------------------------------------------------------------------------
-  double timeElapsed = now.tv_sec + now.tv_usec * pow(10, -6) -
-                       (timeSavedQuaternion.tv_sec +
-                        timeSavedQuaternion.tv_usec * pow((double)timeSavedQuaternion.tv_usec, -6));
+  double timeElapsed = now.tv_sec + now.tv_usec * 1e-6 -
+                       (timeSavedQuaternion.tv_sec + timeSavedQuaternion.tv_usec * 1e-6);
+  if (VectorOperations<double>::norm(savedQuaternion, 4) == 0) {
+    std::memcpy(savedQuaternion, quatInertialTarget, sizeof(savedQuaternion));
+  }
   if (timeElapsed < timeElapsedMax) {
+    double q[4] = {0, 0, 0, 0}, qS[4] = {0, 0, 0, 0};
+    QuaternionOperations::inverse(quatInertialTarget, q);
+    QuaternionOperations::inverse(savedQuaternion, qS);
     double qDiff[4] = {0, 0, 0, 0};
-    VectorOperations<double>::subtract(quatInertialTarget, savedQuaternion, qDiff, 4);
+    VectorOperations<double>::subtract(q, qS, qDiff, 4);
     VectorOperations<double>::mulScalar(qDiff, 1 / timeElapsed, qDiff, 4);
 
-    double tgtQuatVec[3] = {quatInertialTarget[0], quatInertialTarget[1], quatInertialTarget[2]},
-           qDiffVec[3] = {qDiff[0], qDiff[1], qDiff[2]};
+    double tgtQuatVec[3] = {q[0], q[1], q[2]};
+    double qDiffVec[3] = {qDiff[0], qDiff[1], qDiff[2]};
     double sum1[3] = {0, 0, 0}, sum2[3] = {0, 0, 0}, sum3[3] = {0, 0, 0}, sum[3] = {0, 0, 0};
-    VectorOperations<double>::cross(quatInertialTarget, qDiff, sum1);
+    VectorOperations<double>::cross(tgtQuatVec, qDiffVec, sum1);
     VectorOperations<double>::mulScalar(tgtQuatVec, qDiff[3], sum2, 3);
-    VectorOperations<double>::mulScalar(qDiffVec, quatInertialTarget[3], sum3, 3);
+    VectorOperations<double>::mulScalar(qDiffVec, q[3], sum3, 3);
     VectorOperations<double>::add(sum1, sum2, sum, 3);
     VectorOperations<double>::subtract(sum, sum3, sum, 3);
     double omegaRefNew[3] = {0, 0, 0};
@@ -531,10 +518,6 @@ ReturnValue_t Guidance::getDistributionMatrixRw(ACS::SensorValues *sensorValues,
     std::memcpy(rwPseudoInv, acsParameters->rwMatrices.without4, 12 * sizeof(double));
     return returnvalue::OK;
   } else {
-    // 	    @note: This one takes the normal pseudoInverse of all four raction wheels valid.
-    //		Does not make sense, but is implemented that way in MATLAB ?!
-    //		Thought: It does not really play a role, because in case there are more then one
-    //		reaction wheel invalid the pointing control is destined to fail.
     return returnvalue::FAILED;
   }
 }

mission/controller/acs/Guidance.h

@@ -15,7 +15,7 @@ class Guidance {
   void getTargetParamsSafe(double sunTargetSafe[3]);
   ReturnValue_t solarArrayDeploymentComplete();
 
-  // Function to get the target quaternion and refence rotation rate from gps position and
+  // Function to get the target quaternion and reference rotation rate from gps position and
   // position of the ground station
   void targetQuatPtgSingleAxis(timeval now, double posSatE[3], double velSatE[3], double sunDirI[3],
                                double refDirB[3], double quatBI[4], double targetQuat[4],
@@ -25,9 +25,10 @@ class Guidance {
   void targetQuatPtgGs(timeval now, double posSatE[3], double sunDirI[3], double quatIX[4],
                        double targetSatRotRate[3]);
 
-  // Function to get the target quaternion and refence rotation rate for sun pointing after ground
+  // Function to get the target quaternion and reference rotation rate for sun pointing after ground
   // station
-  void targetQuatPtgSun(double sunDirI[3], double targetQuat[4], double refSatRate[3]);
+  void targetQuatPtgSun(timeval now, double sunDirI[3], double targetQuat[4],
+                        double targetSatRotRate[3]);
 
   // Function to get the target quaternion and refence rotation rate from gps position for Nadir
   // pointing
@@ -37,15 +38,15 @@ class Guidance {
                                    double targetQuat[4], double refSatRate[3]);
 
   // @note: Calculates the error quaternion between the current orientation and the target
-  // quaternion, considering a reference quaternion. Additionally the difference between the  actual
+  // quaternion, considering a reference quaternion. Additionally the difference between the actual
   // and a desired satellite rotational rate is calculated, again considering a reference rotational
   // rate. Lastly gives back the error angle of the error quaternion.
   void comparePtg(double currentQuat[4], double currentSatRotRate[3], double targetQuat[4],
                   double targetSatRotRate[3], double refQuat[4], double refSatRotRate[3],
-                  double errorQuat[4], double errorSatRotRate[3], double errorAngle);
+                  double errorQuat[4], double errorSatRotRate[3], double &errorAngle);
   void comparePtg(double currentQuat[4], double currentSatRotRate[3], double targetQuat[4],
                   double targetSatRotRate[3], double errorQuat[4], double errorSatRotRate[3],
-                  double errorAngle);
+                  double &errorAngle);
 
   void targetRotationRate(int8_t timeElapsedMax, timeval now, double quatInertialTarget[4],
                           double *targetSatRotRate);

mission/controller/acs/Navigation.cpp

@@ -19,9 +19,7 @@ ReturnValue_t Navigation::useMekf(ACS::SensorValues *sensorValues,
                                   acsctrl::MekfData *mekfData, AcsParameters *acsParameters) {
   double quatIB[4] = {sensorValues->strSet.caliQx.value, sensorValues->strSet.caliQy.value,
                       sensorValues->strSet.caliQz.value, sensorValues->strSet.caliQw.value};
-  bool quatIBValid = sensorValues->strSet.caliQx.isValid() &&
-                     sensorValues->strSet.caliQy.isValid() &&
-                     sensorValues->strSet.caliQz.isValid() && sensorValues->strSet.caliQw.isValid();
+  bool quatIBValid = sensorValues->strSet.isTrustWorthy.value;
 
   if (mekfStatus == MultiplicativeKalmanFilter::MEKF_UNINITIALIZED) {
     mekfStatus = multiplicativeKalmanFilter.init(

mission/controller/acs/SensorProcessing.cpp

@@ -30,10 +30,7 @@ void SensorProcessing::processMgm(const float *mgm0Value, bool mgm0valid, const
   // ------------------------------------------------
   double magIgrfModel[3] = {0.0, 0.0, 0.0};
   if (gpsValid) {
-    // Should be existing class object which will be called and modified here.
     Igrf13Model igrf13;
-    // So the line above should not be done here. Update: Can be done here as long updated coffs
-    //		stored in acsParameters ?
     igrf13.schmidtNormalization();
     igrf13.updateCoeffGH(timeOfMgmMeasurement);
     // maybe put a condition here, to only update after a full day, this
@@ -45,14 +42,13 @@ void SensorProcessing::processMgm(const float *mgm0Value, bool mgm0valid, const
     {
       PoolReadGuard pg(mgmDataProcessed);
       if (pg.getReadResult() == returnvalue::OK) {
-        float zeroVec[3] = {0.0, 0.0, 0.0};
-        std::memcpy(mgmDataProcessed->mgm0vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(mgmDataProcessed->mgm1vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(mgmDataProcessed->mgm2vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(mgmDataProcessed->mgm3vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(mgmDataProcessed->mgm4vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(mgmDataProcessed->mgmVecTot.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(mgmDataProcessed->mgmVecTotDerivative.value, zeroVec, 3 * sizeof(float));
+        std::memcpy(mgmDataProcessed->mgm0vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(mgmDataProcessed->mgm1vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(mgmDataProcessed->mgm2vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(mgmDataProcessed->mgm3vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(mgmDataProcessed->mgm4vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(mgmDataProcessed->mgmVecTot.value, ZERO_VEC_D, 3 * sizeof(double));
+        std::memcpy(mgmDataProcessed->mgmVecTotDerivative.value, ZERO_VEC_D, 3 * sizeof(double));
         mgmDataProcessed->setValidity(false, true);
         std::memcpy(mgmDataProcessed->magIgrfModel.value, magIgrfModel, 3 * sizeof(double));
         mgmDataProcessed->magIgrfModel.setValid(gpsValid);
@@ -150,7 +146,8 @@ void SensorProcessing::processMgm(const float *mgm0Value, bool mgm0valid, const
   }
   timeOfSavedMagFieldEst = timeOfMgmMeasurement;
 
-  if (mgmDataProcessed->mgmVecTotDerivative.isValid()) {
+  if (VectorOperations<double>::norm(mgmVecTotDerivative, 3) != 0 and
+      mgmDataProcessed->mgmVecTotDerivative.isValid()) {
     lowPassFilter(mgmVecTotDerivative, mgmDataProcessed->mgmVecTotDerivative.value,
                   mgmParameters->mgmDerivativeFilterWeight);
   }
@@ -209,63 +206,68 @@ void SensorProcessing::processSus(
   sunIjkModel[0] = cos(eclipticLongitude);
   sunIjkModel[1] = sin(eclipticLongitude) * cos(epsilon);
   sunIjkModel[2] = sin(eclipticLongitude) * sin(epsilon);
+
+  uint64_t susBrightness[12] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
   if (sus0valid) {
-    sus0valid = susConverter.checkSunSensorData(sus0Value);
+    susBrightness[0] = susConverter.checkSunSensorData(sus0Value);
   }
   if (sus1valid) {
-    sus1valid = susConverter.checkSunSensorData(sus1Value);
+    susBrightness[1] = susConverter.checkSunSensorData(sus1Value);
   }
   if (sus2valid) {
-    sus2valid = susConverter.checkSunSensorData(sus2Value);
+    susBrightness[2] = susConverter.checkSunSensorData(sus2Value);
   }
   if (sus3valid) {
-    sus3valid = susConverter.checkSunSensorData(sus3Value);
+    susBrightness[3] = susConverter.checkSunSensorData(sus3Value);
   }
   if (sus4valid) {
-    sus4valid = susConverter.checkSunSensorData(sus4Value);
+    susBrightness[4] = susConverter.checkSunSensorData(sus4Value);
   }
   if (sus5valid) {
-    sus5valid = susConverter.checkSunSensorData(sus5Value);
+    susBrightness[5] = susConverter.checkSunSensorData(sus5Value);
   }
   if (sus6valid) {
-    sus6valid = susConverter.checkSunSensorData(sus6Value);
+    susBrightness[6] = susConverter.checkSunSensorData(sus6Value);
   }
   if (sus7valid) {
-    sus7valid = susConverter.checkSunSensorData(sus7Value);
+    susBrightness[7] = susConverter.checkSunSensorData(sus7Value);
   }
   if (sus8valid) {
-    sus8valid = susConverter.checkSunSensorData(sus8Value);
+    susBrightness[8] = susConverter.checkSunSensorData(sus8Value);
   }
   if (sus9valid) {
-    sus9valid = susConverter.checkSunSensorData(sus9Value);
+    susBrightness[9] = susConverter.checkSunSensorData(sus9Value);
   }
   if (sus10valid) {
-    sus10valid = susConverter.checkSunSensorData(sus10Value);
+    susBrightness[10] = susConverter.checkSunSensorData(sus10Value);
   }
   if (sus11valid) {
-    sus11valid = susConverter.checkSunSensorData(sus11Value);
+    susBrightness[11] = susConverter.checkSunSensorData(sus11Value);
   }
 
-  if (!sus0valid && !sus1valid && !sus2valid && !sus3valid && !sus4valid && !sus5valid &&
-      !sus6valid && !sus7valid && !sus8valid && !sus9valid && !sus10valid && !sus11valid) {
+  bool susValid[12] = {sus0valid, sus1valid, sus2valid, sus3valid, sus4valid,  sus5valid,
+                       sus6valid, sus7valid, sus8valid, sus9valid, sus10valid, sus11valid};
+  bool allInvalid =
+      susConverter.checkValidity(susValid, susBrightness, susParameters->susBrightnessThreshold);
+
+  if (allInvalid) {
     {
       PoolReadGuard pg(susDataProcessed);
       if (pg.getReadResult() == returnvalue::OK) {
-        float zeroVec[3] = {0.0, 0.0, 0.0};
-        std::memcpy(susDataProcessed->sus0vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus1vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus2vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus3vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus4vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus5vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus6vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus7vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus8vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus9vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus10vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->sus11vec.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->susVecTot.value, zeroVec, 3 * sizeof(float));
-        std::memcpy(susDataProcessed->susVecTotDerivative.value, zeroVec, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus0vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus1vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus2vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus3vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus4vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus5vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus6vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus7vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus8vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus9vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus10vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->sus11vec.value, ZERO_VEC_F, 3 * sizeof(float));
+        std::memcpy(susDataProcessed->susVecTot.value, ZERO_VEC_D, 3 * sizeof(double));
+        std::memcpy(susDataProcessed->susVecTotDerivative.value, ZERO_VEC_D, 3 * sizeof(double));
         susDataProcessed->setValidity(false, true);
         std::memcpy(susDataProcessed->sunIjkModel.value, sunIjkModel, 3 * sizeof(double));
         susDataProcessed->sunIjkModel.setValid(true);
@@ -273,118 +275,78 @@ void SensorProcessing::processSus(
     }
     return;
   }
-  // WARNING: NOT TRANSFORMED IN BODY FRAME YET
-  // Transformation into Geomtry Frame
-  float sus0VecBody[3] = {0, 0, 0}, sus1VecBody[3] = {0, 0, 0}, sus2VecBody[3] = {0, 0, 0},
-        sus3VecBody[3] = {0, 0, 0}, sus4VecBody[3] = {0, 0, 0}, sus5VecBody[3] = {0, 0, 0},
-        sus6VecBody[3] = {0, 0, 0}, sus7VecBody[3] = {0, 0, 0}, sus8VecBody[3] = {0, 0, 0},
-        sus9VecBody[3] = {0, 0, 0}, sus10VecBody[3] = {0, 0, 0}, sus11VecBody[3] = {0, 0, 0};
 
-  if (sus0valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus0orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus0Value, susParameters->sus0coeffAlpha,
-                                             susParameters->sus0coeffBeta),
-        sus0VecBody, 3, 3, 1);
-  }
-  if (sus1valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus1orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus1Value, susParameters->sus1coeffAlpha,
-                                             susParameters->sus1coeffBeta),
-        sus1VecBody, 3, 3, 1);
-  }
-  if (sus2valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus2orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus2Value, susParameters->sus2coeffAlpha,
-                                             susParameters->sus2coeffBeta),
-        sus2VecBody, 3, 3, 1);
-  }
-  if (sus3valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus3orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus3Value, susParameters->sus3coeffAlpha,
-                                             susParameters->sus3coeffBeta),
-        sus3VecBody, 3, 3, 1);
-  }
-  if (sus4valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus4orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus4Value, susParameters->sus4coeffAlpha,
-                                             susParameters->sus4coeffBeta),
-        sus4VecBody, 3, 3, 1);
-  }
-  if (sus5valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus5orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus5Value, susParameters->sus5coeffAlpha,
-                                             susParameters->sus5coeffBeta),
-        sus5VecBody, 3, 3, 1);
-  }
-  if (sus6valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus6orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus6Value, susParameters->sus6coeffAlpha,
-                                             susParameters->sus6coeffBeta),
-        sus6VecBody, 3, 3, 1);
-  }
-  if (sus7valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus7orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus7Value, susParameters->sus7coeffAlpha,
-                                             susParameters->sus7coeffBeta),
-        sus7VecBody, 3, 3, 1);
-  }
-  if (sus8valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus8orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus8Value, susParameters->sus8coeffAlpha,
-                                             susParameters->sus8coeffBeta),
-        sus8VecBody, 3, 3, 1);
-  }
-  if (sus9valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus9orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus9Value, susParameters->sus9coeffAlpha,
-                                             susParameters->sus9coeffBeta),
-        sus9VecBody, 3, 3, 1);
-  }
-  if (sus10valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus10orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus10Value, susParameters->sus10coeffAlpha,
-                                             susParameters->sus10coeffBeta),
-        sus10VecBody, 3, 3, 1);
-  }
-  if (sus11valid) {
-    MatrixOperations<float>::multiply(
-        susParameters->sus11orientationMatrix[0],
-        susConverter.getSunVectorSensorFrame(sus11Value, susParameters->sus11coeffAlpha,
-                                             susParameters->sus11coeffBeta),
-        sus11VecBody, 3, 3, 1);
-  }
+  float susVecSensor[12][3] = {{0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0},
+                               {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}};
+  float susVecBody[12][3] = {{0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0},
+                             {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}};
 
-  /* ------ Mean Value: susDirEst ------ */
-  bool validIds[12] = {sus0valid, sus1valid, sus2valid, sus3valid, sus4valid,  sus5valid,
-                       sus6valid, sus7valid, sus8valid, sus9valid, sus10valid, sus11valid};
-  float susVecBody[3][12] = {{sus0VecBody[0], sus1VecBody[0], sus2VecBody[0], sus3VecBody[0],
-                              sus4VecBody[0], sus5VecBody[0], sus6VecBody[0], sus7VecBody[0],
-                              sus8VecBody[0], sus9VecBody[0], sus10VecBody[0], sus11VecBody[0]},
-                             {sus0VecBody[1], sus1VecBody[1], sus2VecBody[1], sus3VecBody[1],
-                              sus4VecBody[1], sus5VecBody[1], sus6VecBody[1], sus7VecBody[1],
-                              sus8VecBody[1], sus9VecBody[1], sus10VecBody[1], sus11VecBody[1]},
-                             {sus0VecBody[2], sus1VecBody[2], sus2VecBody[2], sus3VecBody[2],
-                              sus4VecBody[2], sus5VecBody[2], sus6VecBody[2], sus7VecBody[2],
-                              sus8VecBody[2], sus9VecBody[2], sus10VecBody[2], sus11VecBody[2]}};
+  if (susValid[0]) {
+    susConverter.calculateSunVector(susVecSensor[0], sus0Value);
+    MatrixOperations<float>::multiply(susParameters->sus0orientationMatrix[0], susVecSensor[0],
+                                      susVecBody[0], 3, 3, 1);
+  }
+  if (susValid[1]) {
+    susConverter.calculateSunVector(susVecSensor[1], sus1Value);
+    MatrixOperations<float>::multiply(susParameters->sus1orientationMatrix[0], susVecSensor[1],
+                                      susVecBody[1], 3, 3, 1);
+  }
+  if (susValid[2]) {
+    susConverter.calculateSunVector(susVecSensor[2], sus2Value);
+    MatrixOperations<float>::multiply(susParameters->sus2orientationMatrix[0], susVecSensor[2],
+                                      susVecBody[2], 3, 3, 1);
+  }
+  if (susValid[3]) {
+    susConverter.calculateSunVector(susVecSensor[3], sus3Value);
+    MatrixOperations<float>::multiply(susParameters->sus3orientationMatrix[0], susVecSensor[3],
+                                      susVecBody[3], 3, 3, 1);
+  }
+  if (susValid[4]) {
+    susConverter.calculateSunVector(susVecSensor[4], sus4Value);
+    MatrixOperations<float>::multiply(susParameters->sus4orientationMatrix[0], susVecSensor[4],
+                                      susVecBody[4], 3, 3, 1);
+  }
+  if (susValid[5]) {
+    susConverter.calculateSunVector(susVecSensor[5], sus5Value);
+    MatrixOperations<float>::multiply(susParameters->sus5orientationMatrix[0], susVecSensor[5],
+                                      susVecBody[5], 3, 3, 1);
+  }
+  if (susValid[6]) {
+    susConverter.calculateSunVector(susVecSensor[6], sus6Value);
+    MatrixOperations<float>::multiply(susParameters->sus6orientationMatrix[0], susVecSensor[6],
+                                      susVecBody[6], 3, 3, 1);
+  }
+  if (susValid[7]) {
+    susConverter.calculateSunVector(susVecSensor[7], sus7Value);
+    MatrixOperations<float>::multiply(susParameters->sus7orientationMatrix[0], susVecSensor[7],
+                                      susVecBody[7], 3, 3, 1);
+  }
+  if (susValid[8]) {
+    susConverter.calculateSunVector(susVecSensor[8], sus8Value);
+    MatrixOperations<float>::multiply(susParameters->sus8orientationMatrix[0], susVecSensor[8],
+                                      susVecBody[8], 3, 3, 1);
+  }
+  if (susValid[9]) {
+    susConverter.calculateSunVector(susVecSensor[9], sus9Value);
+    MatrixOperations<float>::multiply(susParameters->sus9orientationMatrix[0], susVecSensor[9],
+                                      susVecBody[9], 3, 3, 1);
+  }
+  if (susValid[10]) {
+    susConverter.calculateSunVector(susVecSensor[10], sus10Value);
+    MatrixOperations<float>::multiply(susParameters->sus10orientationMatrix[0], susVecSensor[10],
+                                      susVecBody[10], 3, 3, 1);
+  }
+  if (susValid[11]) {
+    susConverter.calculateSunVector(susVecSensor[11], sus11Value);
+    MatrixOperations<float>::multiply(susParameters->sus11orientationMatrix[0], susVecSensor[11],
+                                      susVecBody[11], 3, 3, 1);
+  }
 
   double susMeanValue[3] = {0, 0, 0};
   for (uint8_t i = 0; i < 12; i++) {
-    if (validIds[i]) {
-      susMeanValue[0] += susVecBody[0][i];
-      susMeanValue[1] += susVecBody[1][i];
-      susMeanValue[2] += susVecBody[2][i];
-    }
+    susMeanValue[0] += susVecBody[i][0];
+    susMeanValue[1] += susVecBody[i][1];
+    susMeanValue[2] += susVecBody[i][2];
   }
   double susVecTot[3] = {0.0, 0.0, 0.0};
   VectorOperations<double>::normalize(susMeanValue, susVecTot, 3);
@@ -405,29 +367,29 @@ void SensorProcessing::processSus(
   {
     PoolReadGuard pg(susDataProcessed);
     if (pg.getReadResult() == returnvalue::OK) {
-      std::memcpy(susDataProcessed->sus0vec.value, sus0VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus0vec.value, susVecBody[0], 3 * sizeof(float));
       susDataProcessed->sus0vec.setValid(sus0valid);
-      std::memcpy(susDataProcessed->sus1vec.value, sus1VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus1vec.value, susVecBody[1], 3 * sizeof(float));
       susDataProcessed->sus1vec.setValid(sus1valid);
-      std::memcpy(susDataProcessed->sus2vec.value, sus2VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus2vec.value, susVecBody[2], 3 * sizeof(float));
       susDataProcessed->sus2vec.setValid(sus2valid);
-      std::memcpy(susDataProcessed->sus3vec.value, sus3VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus3vec.value, susVecBody[3], 3 * sizeof(float));
       susDataProcessed->sus3vec.setValid(sus3valid);
-      std::memcpy(susDataProcessed->sus4vec.value, sus4VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus4vec.value, susVecBody[4], 3 * sizeof(float));
       susDataProcessed->sus4vec.setValid(sus4valid);
-      std::memcpy(susDataProcessed->sus5vec.value, sus5VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus5vec.value, susVecBody[5], 3 * sizeof(float));
       susDataProcessed->sus5vec.setValid(sus5valid);
-      std::memcpy(susDataProcessed->sus6vec.value, sus6VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus6vec.value, susVecBody[6], 3 * sizeof(float));
       susDataProcessed->sus6vec.setValid(sus6valid);
-      std::memcpy(susDataProcessed->sus7vec.value, sus7VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus7vec.value, susVecBody[7], 3 * sizeof(float));
       susDataProcessed->sus7vec.setValid(sus7valid);
-      std::memcpy(susDataProcessed->sus8vec.value, sus8VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus8vec.value, susVecBody[8], 3 * sizeof(float));
       susDataProcessed->sus8vec.setValid(sus8valid);
-      std::memcpy(susDataProcessed->sus9vec.value, sus9VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus9vec.value, susVecBody[9], 3 * sizeof(float));
       susDataProcessed->sus9vec.setValid(sus9valid);
-      std::memcpy(susDataProcessed->sus10vec.value, sus10VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus10vec.value, susVecBody[10], 3 * sizeof(float));
       susDataProcessed->sus10vec.setValid(sus10valid);
-      std::memcpy(susDataProcessed->sus11vec.value, sus11VecBody, 3 * sizeof(float));
+      std::memcpy(susDataProcessed->sus11vec.value, susVecBody[11], 3 * sizeof(float));
       susDataProcessed->sus11vec.setValid(sus11valid);
       std::memcpy(susDataProcessed->susVecTot.value, susVecTot, 3 * sizeof(double));
       susDataProcessed->susVecTot.setValid(true);
@@ -458,12 +420,11 @@ void SensorProcessing::processGyr(
     {
       PoolReadGuard pg(gyrDataProcessed);
       if (pg.getReadResult() == returnvalue::OK) {
-        double zeroVector[3] = {0.0, 0.0, 0.0};
-        std::memcpy(gyrDataProcessed->gyr0vec.value, zeroVector, 3 * sizeof(double));
-        std::memcpy(gyrDataProcessed->gyr1vec.value, zeroVector, 3 * sizeof(double));
-        std::memcpy(gyrDataProcessed->gyr2vec.value, zeroVector, 3 * sizeof(double));
-        std::memcpy(gyrDataProcessed->gyr3vec.value, zeroVector, 3 * sizeof(double));
-        std::memcpy(gyrDataProcessed->gyrVecTot.value, zeroVector, 3 * sizeof(double));
+        std::memcpy(gyrDataProcessed->gyr0vec.value, ZERO_VEC_D, 3 * sizeof(double));
+        std::memcpy(gyrDataProcessed->gyr1vec.value, ZERO_VEC_D, 3 * sizeof(double));
+        std::memcpy(gyrDataProcessed->gyr2vec.value, ZERO_VEC_D, 3 * sizeof(double));
+        std::memcpy(gyrDataProcessed->gyr3vec.value, ZERO_VEC_D, 3 * sizeof(double));
+        std::memcpy(gyrDataProcessed->gyrVecTot.value, ZERO_VEC_D, 3 * sizeof(double));
         gyrDataProcessed->setValidity(false, true);
       }
     }
@@ -533,7 +494,7 @@ void SensorProcessing::processGyr(
     }
   }
 
-  if (gyrDataProcessed->gyrVecTot.isValid()) {
+  if (VectorOperations<double>::norm(gyrVecTot, 3) != 0 and gyrDataProcessed->gyrVecTot.isValid()) {
     lowPassFilter(gyrVecTot, gyrDataProcessed->gyrVecTot.value, gyrParameters->gyrFilterWeight);
   }
 
@@ -572,7 +533,7 @@ void SensorProcessing::processGps(const double gpsLatitude, const double gpsLong
 
     // Altitude FDIR
     if (gpsAltitude > gpsParameters->maximumFdirAltitude ||
-        gpsAltitude < gpsParameters->maximumFdirAltitude) {
+        gpsAltitude < gpsParameters->minimumFdirAltitude) {
       altitude = gpsParameters->fdirAltitude;
     } else {
       altitude = gpsAltitude;

mission/controller/acs/SensorProcessing.h

@@ -23,6 +23,9 @@ class SensorProcessing {
                acsctrl::GpsDataProcessed *gpsDataProcessed,
                const AcsParameters *acsParameters);  // Will call protected functions
  private:
+  static constexpr float ZERO_VEC_F[3] = {0, 0, 0};
+  static constexpr double ZERO_VEC_D[3] = {0, 0, 0};
+
  protected:
   // short description needed for every function
   void processMgm(const float *mgm0Value, bool mgm0valid, const float *mgm1Value, bool mgm1valid,

mission/controller/acs/SusConverter.cpp

@@ -1,121 +1,64 @@
 #include "SusConverter.h"
 
-#include <fsfw/datapoollocal/LocalPoolVariable.h>
-#include <fsfw/datapoollocal/LocalPoolVector.h>
-#include <fsfw/globalfunctions/math/VectorOperations.h>
 #include <math.h>
 
-#include <iostream>
-
-bool SusConverter::checkSunSensorData(const uint16_t susChannel[6]) {
-  if (susChannel[0] <= susChannelValueCheckLow || susChannel[0] > susChannelValueCheckHigh ||
+uint64_t SusConverter::checkSunSensorData(const uint16_t susChannel[6]) {
+  if (susChannel[0] <= SUS_CHANNEL_VALUE_LOW || susChannel[0] > SUS_CHANNEL_VALUE_HIGH ||
       susChannel[0] > susChannel[GNDREF]) {
-    return false;
+    return 0;
   }
-  if (susChannel[1] <= susChannelValueCheckLow || susChannel[1] > susChannelValueCheckHigh ||
+  if (susChannel[1] <= SUS_CHANNEL_VALUE_LOW || susChannel[1] > SUS_CHANNEL_VALUE_HIGH ||
       susChannel[1] > susChannel[GNDREF]) {
-    return false;
+    return 0;
   };
-  if (susChannel[2] <= susChannelValueCheckLow || susChannel[2] > susChannelValueCheckHigh ||
+  if (susChannel[2] <= SUS_CHANNEL_VALUE_LOW || susChannel[2] > SUS_CHANNEL_VALUE_HIGH ||
       susChannel[2] > susChannel[GNDREF]) {
-    return false;
+    return 0;
   };
-  if (susChannel[3] <= susChannelValueCheckLow || susChannel[3] > susChannelValueCheckHigh ||
+  if (susChannel[3] <= SUS_CHANNEL_VALUE_LOW || susChannel[3] > SUS_CHANNEL_VALUE_HIGH ||
       susChannel[3] > susChannel[GNDREF]) {
-    return false;
+    return 0;
   };
 
-  susChannelValueSum =
+  uint64_t susChannelValueSum =
       4 * susChannel[GNDREF] - (susChannel[0] + susChannel[1] + susChannel[2] + susChannel[3]);
-  if ((susChannelValueSum < susChannelValueSumHigh) &&
-      (susChannelValueSum > susChannelValueSumLow)) {
-    return false;
+  if (susChannelValueSum < SUS_ALBEDO_CHECK) {
+    return 0;
   };
-  return true;
+  return susChannelValueSum;
 }
 
-void SusConverter::calcAngle(const uint16_t susChannel[6]) {
-  float xout, yout;
-  float s = 0.03;  // s=[mm] gap between diodes
-  uint8_t d = 5;   // d=[mm] edge length of the quadratic aperture
-  uint8_t h = 1;   // h=[mm] distance between diodes and aperture
-  int ch0, ch1, ch2, ch3;
+bool SusConverter::checkValidity(bool* susValid, const uint64_t brightness[12],
+                                 const float threshold) {
+  uint8_t maxBrightness = 0;
+  VectorOperations<uint64_t>::maxValue(brightness, 12, &maxBrightness);
+  if (brightness[maxBrightness] == 0) {
+    return true;
+  }
+  for (uint8_t idx = 0; idx < 12; idx++) {
+    if ((idx != maxBrightness) and (brightness[idx] < threshold * brightness[maxBrightness])) {
+      susValid[idx] = false;
+      continue;
+    }
+    susValid[idx] = true;
+  }
+  return false;
+}
+
+void SusConverter::calculateSunVector(float* sunVectorSensorFrame, const uint16_t susChannel[6]) {
   // Substract measurement values from GNDREF zero current threshold
-  ch0 = susChannel[GNDREF] - susChannel[0];
-  ch1 = susChannel[GNDREF] - susChannel[1];
-  ch2 = susChannel[GNDREF] - susChannel[2];
-  ch3 = susChannel[GNDREF] - susChannel[3];
+  float ch0 = susChannel[GNDREF] - susChannel[0];
+  float ch1 = susChannel[GNDREF] - susChannel[1];
+  float ch2 = susChannel[GNDREF] - susChannel[2];
+  float ch3 = susChannel[GNDREF] - susChannel[3];
 
   // Calculation of x and y
-  xout = ((d - s) / 2) * (ch2 - ch3 - ch0 + ch1) / (ch0 + ch1 + ch2 + ch3);  //[mm]
-  yout = ((d - s) / 2) * (ch2 + ch3 - ch0 - ch1) / (ch0 + ch1 + ch2 + ch3);  //[mm]
+  float xout = ((D - S) / 2) * (ch2 - ch3 - ch0 + ch1) / (ch0 + ch1 + ch2 + ch3);  //[mm]
+  float yout = ((D - S) / 2) * (ch2 + ch3 - ch0 - ch1) / (ch0 + ch1 + ch2 + ch3);  //[mm]
 
   // Calculation of the angles
-  alphaBetaRaw[0] = atan2(xout, h) * (180 / M_PI);  //[°]
-  alphaBetaRaw[1] = atan2(yout, h) * (180 / M_PI);  //[°]
-}
-
-void SusConverter::calibration(const float coeffAlpha[9][10], const float coeffBeta[9][10]) {
-  uint8_t index, k, l;
-
-  // while loop iterates above all calibration cells to use the different calibration functions in
-  // each cell
-  k = 0;
-  while (k < 3) {
-    k++;
-    l = 0;
-    while (l < 3) {
-      l++;
-      // if-condition to check in which cell the data point has to be
-      if ((alphaBetaRaw[0] > ((completeCellWidth * ((k - 1) / 3.)) - halfCellWidth) &&
-           alphaBetaRaw[0] < ((completeCellWidth * (k / 3.)) - halfCellWidth)) &&
-          (alphaBetaRaw[1] > ((completeCellWidth * ((l - 1) / 3.)) - halfCellWidth) &&
-           alphaBetaRaw[1] < ((completeCellWidth * (l / 3.)) - halfCellWidth))) {
-        index = (3 * (k - 1) + l) - 1;  // calculate the index of the datapoint for the right cell
-        alphaBetaCalibrated[0] =
-            coeffAlpha[index][0] + coeffAlpha[index][1] * alphaBetaRaw[0] +
-            coeffAlpha[index][2] * alphaBetaRaw[1] +
-            coeffAlpha[index][3] * alphaBetaRaw[0] * alphaBetaRaw[0] +
-            coeffAlpha[index][4] * alphaBetaRaw[0] * alphaBetaRaw[1] +
-            coeffAlpha[index][5] * alphaBetaRaw[1] * alphaBetaRaw[1] +
-            coeffAlpha[index][6] * alphaBetaRaw[0] * alphaBetaRaw[0] * alphaBetaRaw[0] +
-            coeffAlpha[index][7] * alphaBetaRaw[0] * alphaBetaRaw[0] * alphaBetaRaw[1] +
-            coeffAlpha[index][8] * alphaBetaRaw[0] * alphaBetaRaw[1] * alphaBetaRaw[1] +
-            coeffAlpha[index][9] * alphaBetaRaw[1] * alphaBetaRaw[1] * alphaBetaRaw[1];  //[°]
-        alphaBetaCalibrated[1] =
-            coeffBeta[index][0] + coeffBeta[index][1] * alphaBetaRaw[0] +
-            coeffBeta[index][2] * alphaBetaRaw[1] +
-            coeffBeta[index][3] * alphaBetaRaw[0] * alphaBetaRaw[0] +
-            coeffBeta[index][4] * alphaBetaRaw[0] * alphaBetaRaw[1] +
-            coeffBeta[index][5] * alphaBetaRaw[1] * alphaBetaRaw[1] +
-            coeffBeta[index][6] * alphaBetaRaw[0] * alphaBetaRaw[0] * alphaBetaRaw[0] +
-            coeffBeta[index][7] * alphaBetaRaw[0] * alphaBetaRaw[0] * alphaBetaRaw[1] +
-            coeffBeta[index][8] * alphaBetaRaw[0] * alphaBetaRaw[1] * alphaBetaRaw[1] +
-            coeffBeta[index][9] * alphaBetaRaw[1] * alphaBetaRaw[1] * alphaBetaRaw[1];  //[°]
-      }
-    }
-  }
-}
-
-float* SusConverter::calculateSunVector() {
-  // Calculate the normalized Sun Vector
-  sunVectorSensorFrame[0] = -(tan(alphaBetaCalibrated[0] * (M_PI / 180)) /
-                              (sqrt((powf(tan(alphaBetaCalibrated[0] * (M_PI / 180)), 2)) +
-                                    powf(tan((alphaBetaCalibrated[1] * (M_PI / 180))), 2) + (1))));
-  sunVectorSensorFrame[1] = -(tan(alphaBetaCalibrated[1] * (M_PI / 180)) /
-                              (sqrt(powf((tan(alphaBetaCalibrated[0] * (M_PI / 180))), 2) +
-                                    powf(tan((alphaBetaCalibrated[1] * (M_PI / 180))), 2) + (1))));
-  sunVectorSensorFrame[2] =
-      -(-1 / (sqrt(powf((tan(alphaBetaCalibrated[0] * (M_PI / 180))), 2) +
-                   powf((tan(alphaBetaCalibrated[1] * (M_PI / 180))), 2) + (1))));
-
-  return sunVectorSensorFrame;
-}
-
-float* SusConverter::getSunVectorSensorFrame(const uint16_t susChannel[6],
-                                             const float coeffAlpha[9][10],
-                                             const float coeffBeta[9][10]) {
-  calcAngle(susChannel);
-  calibration(coeffAlpha, coeffBeta);
-  return calculateSunVector();
+  sunVectorSensorFrame[0] = -xout;
+  sunVectorSensorFrame[1] = -yout;
+  sunVectorSensorFrame[2] = H;
+  VectorOperations<float>::normalize(sunVectorSensorFrame, sunVectorSensorFrame, 3);
 }

mission/controller/acs/SusConverter.h

@@ -1,8 +1,4 @@
-#ifndef MISSION_CONTROLLER_ACS_SUSCONVERTER_H_
-#define MISSION_CONTROLLER_ACS_SUSCONVERTER_H_
-
-#include <fsfw/datapoollocal/LocalPoolVector.h>
-#include <stdint.h>
+#include <fsfw/globalfunctions/math/VectorOperations.h>
 
 #include "AcsParameters.h"
 
@@ -10,41 +6,26 @@ class SusConverter {
  public:
   SusConverter() {}
 
-  bool checkSunSensorData(const uint16_t susChannel[6]);
-
-  void calcAngle(const uint16_t susChannel[6]);
-  void calibration(const float coeffAlpha[9][10], const float coeffBeta[9][10]);
-  float* calculateSunVector();
-
-  float* getSunVectorSensorFrame(const uint16_t susChannel[6], const float coeffAlpha[9][10],
-                                 const float coeffBeta[9][10]);
+  uint64_t checkSunSensorData(const uint16_t susChannel[6]);
+  bool checkValidity(bool* susValid, const uint64_t brightness[12], const float threshold);
+  void calculateSunVector(float* sunVectorSensorFrame, const uint16_t susChannel[6]);
 
  private:
-  float alphaBetaRaw[2];          //[°]
-  float alphaBetaCalibrated[2];   //[°]
-  float sunVectorSensorFrame[3];  //[-]
-
-  bool validFlag[12] = {returnvalue::OK, returnvalue::OK, returnvalue::OK, returnvalue::OK,
-                        returnvalue::OK, returnvalue::OK, returnvalue::OK, returnvalue::OK,
-                        returnvalue::OK, returnvalue::OK, returnvalue::OK, returnvalue::OK};
-
   static const uint8_t GNDREF = 4;
-  uint16_t susChannelValueCheckHigh =
-      4096;  //=2^12[Bit]high borderline for the channel values of one sun sensor for validity Check
-  uint8_t susChannelValueCheckLow =
-      0;  //[Bit]low borderline for the channel values of one sun sensor for validity Check
-  uint16_t susChannelValueSumHigh =
-      100;  // 4096[Bit]high borderline for check if the sun sensor is illuminated by the sun or by
-            // the reflection of sunlight from the moon/earth
-  uint8_t susChannelValueSumLow =
-      0;  //[Bit]low borderline for check if the sun sensor is illuminated
-          // by the sun or by the reflection of sunlight from the moon/earth
-  uint8_t completeCellWidth = 140,
-          halfCellWidth = 70;  //[°] Width of the calibration cells --> necessary for checking in
-                               // which cell a data point should be
-  uint16_t susChannelValueSum = 0;
+  // =2^12[Bit]high borderline for the channel values of one sun sensor for validity Check
+  static constexpr uint16_t SUS_CHANNEL_VALUE_HIGH = 4096;
+  // [Bit]low borderline for the channel values of one sun sensor for validity Check
+  static constexpr uint8_t SUS_CHANNEL_VALUE_LOW = 0;
+  // 4096[Bit]high borderline for check if the sun sensor is illuminated by the sun or by the
+  // reflection of sunlight from the moon/earth
+  static constexpr uint16_t SUS_ALBEDO_CHECK = 1000;
+  // [Bit]low borderline for check if the sun sensor is illuminated by the sun or by the  reflection
+  // of sunlight from the moon/earth
+  static constexpr uint8_t SUS_CHANNEL_SUM_LOW = 0;
+
+  static constexpr float S = 0.03;  // S=[mm] gap between diodes
+  static constexpr float D = 5;     // D=[mm] edge length of the quadratic aperture
+  static constexpr float H = 2.5;   // H=[mm] distance between diodes and aperture
 
   AcsParameters acsParameters;
 };
-
-#endif /* MISSION_CONTROLLER_ACS_SUSCONVERTER_H_ */

mission/controller/acs/control/Detumble.cpp

@@ -7,8 +7,10 @@ Detumble::Detumble() {}
 
 Detumble::~Detumble() {}
 
-uint8_t Detumble::detumbleStrategy(const bool magFieldValid, const bool satRotRateValid,
-                                   const bool magFieldRateValid, const bool useFullDetumbleLaw) {
+acs::SafeModeStrategy Detumble::detumbleStrategy(const bool magFieldValid,
+                                                 const bool satRotRateValid,
+                                                 const bool magFieldRateValid,
+                                                 const bool useFullDetumbleLaw) {
   if (not magFieldValid) {
     return acs::SafeModeStrategy::SAFECTRL_NO_MAG_FIELD_FOR_CONTROL;
   } else if (satRotRateValid and useFullDetumbleLaw) {

mission/controller/acs/control/Detumble.h

@@ -11,8 +11,9 @@ class Detumble {
   Detumble();
   virtual ~Detumble();
 
-  uint8_t detumbleStrategy(const bool magFieldValid, const bool satRotRateValid,
-                           const bool magFieldRateValid, const bool useFullDetumbleLaw);
+  acs::SafeModeStrategy detumbleStrategy(const bool magFieldValid, const bool satRotRateValid,
+                                         const bool magFieldRateValid,
+                                         const bool useFullDetumbleLaw);
 
   void bDotLawFull(const double *satRotRateB, const double *magFieldB, double *magMomB,
                    double gain);

mission/controller/acs/control/PtgCtrl.cpp

@@ -5,9 +5,6 @@
 #include <fsfw/globalfunctions/math/QuaternionOperations.h>
 #include <fsfw/globalfunctions/math/VectorOperations.h>
 #include <fsfw/globalfunctions/sign.h>
-#include <math.h>
-
-#include "../util/MathOperations.h"
 
 PtgCtrl::PtgCtrl(AcsParameters *acsParameters_) { acsParameters = acsParameters_; }
 
@@ -32,12 +29,13 @@ void PtgCtrl::ptgLaw(AcsParameters::PointingLawParameters *pointingLawParameters
   double qErrorLaw[3] = {0, 0, 0};
 
   for (int i = 0; i < 3; i++) {
-    if (abs(qError[i]) < qErrorMin) {
+    if (std::abs(qError[i]) < qErrorMin) {
       qErrorLaw[i] = qErrorMin;
     } else {
-      qErrorLaw[i] = abs(qError[i]);
+      qErrorLaw[i] = std::abs(qError[i]);
     }
   }
+
   double qErrorLawNorm = VectorOperations<double>::norm(qErrorLaw, 3);
 
   double gain1 = cInt * omMax / qErrorLawNorm;
@@ -73,7 +71,7 @@ void PtgCtrl::ptgLaw(AcsParameters::PointingLawParameters *pointingLawParameters
   double pErrorSign[3] = {0, 0, 0};
 
   for (int i = 0; i < 3; i++) {
-    if (abs(pError[i]) > 1) {
+    if (std::abs(pError[i]) > 1) {
       pErrorSign[i] = sign(pError[i]);
     } else {
       pErrorSign[i] = pError[i];
@@ -98,61 +96,92 @@ void PtgCtrl::ptgLaw(AcsParameters::PointingLawParameters *pointingLawParameters
   VectorOperations<double>::mulScalar(torqueRws, -1, torqueRws, 4);
 }
 
+void PtgCtrl::ptgNullspace(AcsParameters::PointingLawParameters *pointingLawParameters,
+                           const int32_t speedRw0, const int32_t speedRw1, const int32_t speedRw2,
+                           const int32_t speedRw3, double *rwTrqNs) {
+  // concentrate RW speeds as vector and convert to double
+  double speedRws[4] = {static_cast<double>(speedRw0), static_cast<double>(speedRw1),
+                        static_cast<double>(speedRw2), static_cast<double>(speedRw3)};
+  VectorOperations<double>::mulScalar(speedRws, 1e-1, speedRws, 4);
+  VectorOperations<double>::mulScalar(speedRws, RPM_TO_RAD_PER_SEC, speedRws, 4);
+
+  // calculate RPM offset utilizing the nullspace
+  double rpmOffset[4] = {0, 0, 0, 0};
+  double rpmOffsetSpeed = pointingLawParameters->nullspaceSpeed / 10 * RPM_TO_RAD_PER_SEC;
+  VectorOperations<double>::mulScalar(acsParameters->rwMatrices.nullspaceVector, rpmOffsetSpeed,
+                                      rpmOffset, 4);
+
+  // calculate resulting angular momentum
+  double rwAngMomentum[4] = {0, 0, 0, 0}, diffRwSpeed[4] = {0, 0, 0, 0};
+  VectorOperations<double>::subtract(speedRws, rpmOffset, diffRwSpeed, 4);
+  VectorOperations<double>::mulScalar(diffRwSpeed, acsParameters->rwHandlingParameters.inertiaWheel,
+                                      rwAngMomentum, 4);
+
+  // calculate resulting torque
+  double nullspaceMatrix[4][4] = {{0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}};
+  MatrixOperations<double>::multiply(acsParameters->rwMatrices.nullspaceVector,
+                                     acsParameters->rwMatrices.nullspaceVector, *nullspaceMatrix, 4,
+                                     1, 4);
+  MatrixOperations<double>::multiply(*nullspaceMatrix, rwAngMomentum, rwTrqNs, 4, 4, 1);
+  VectorOperations<double>::mulScalar(rwTrqNs, -1 * pointingLawParameters->gainNullspace, rwTrqNs,
+                                      4);
+}
+
 void PtgCtrl::ptgDesaturation(AcsParameters::PointingLawParameters *pointingLawParameters,
-                              double *magFieldEst, bool magFieldEstValid, double *satRate,
-                              int32_t *speedRw0, int32_t *speedRw1, int32_t *speedRw2,
-                              int32_t *speedRw3, double *mgtDpDes) {
-  if (!(magFieldEstValid) || !(pointingLawParameters->desatOn)) {
-    mgtDpDes[0] = 0;
-    mgtDpDes[1] = 0;
-    mgtDpDes[2] = 0;
+                              const double *magFieldB, const bool magFieldBValid,
+                              const double *satRate, const int32_t speedRw0, const int32_t speedRw1,
+                              const int32_t speedRw2, const int32_t speedRw3, double *mgtDpDes) {
+  if (not magFieldBValid or not pointingLawParameters->desatOn) {
     return;
   }
 
-  // calculating momentum of satellite and momentum of reaction wheels
-  double speedRws[4] = {(double)*speedRw0, (double)*speedRw1, (double)*speedRw2, (double)*speedRw3};
-  double momentumRwU[4] = {0, 0, 0, 0}, momentumRw[3] = {0, 0, 0};
-  VectorOperations<double>::mulScalar(speedRws, acsParameters->rwHandlingParameters.inertiaWheel,
-                                      momentumRwU, 4);
-  MatrixOperations<double>::multiply(*(acsParameters->rwMatrices.alignmentMatrix), momentumRwU,
-                                     momentumRw, 3, 4, 1);
-  double momentumSat[3] = {0, 0, 0}, momentumTotal[3] = {0, 0, 0};
-  MatrixOperations<double>::multiply(*(acsParameters->inertiaEIVE.inertiaMatrixDeployed), satRate,
-                                     momentumSat, 3, 3, 1);
-  VectorOperations<double>::add(momentumSat, momentumRw, momentumTotal, 3);
-  // calculating momentum error
-  double deltaMomentum[3] = {0, 0, 0};
-  VectorOperations<double>::subtract(momentumTotal, pointingLawParameters->desatMomentumRef,
-                                     deltaMomentum, 3);
-  // resulting magnetic dipole command
-  double crossMomentumMagField[3] = {0, 0, 0};
-  VectorOperations<double>::cross(deltaMomentum, magFieldEst, crossMomentumMagField);
-  double normMag = VectorOperations<double>::norm(magFieldEst, 3), factor = 0;
-  factor = (pointingLawParameters->deSatGainFactor) / normMag;
-  VectorOperations<double>::mulScalar(crossMomentumMagField, factor, mgtDpDes, 3);
-}
+  // concentrate RW speeds as vector and convert to double
+  double speedRws[4] = {static_cast<double>(speedRw0), static_cast<double>(speedRw1),
+                        static_cast<double>(speedRw2), static_cast<double>(speedRw3)};
 
-void PtgCtrl::ptgNullspace(AcsParameters::PointingLawParameters *pointingLawParameters,
-                           const int32_t *speedRw0, const int32_t *speedRw1,
-                           const int32_t *speedRw2, const int32_t *speedRw3, double *rwTrqNs) {
-  double speedRws[4] = {(double)*speedRw0, (double)*speedRw1, (double)*speedRw2, (double)*speedRw3};
-  double wheelMomentum[4] = {0, 0, 0, 0};
-  double rpmOffset[4] = {1, 1, 1, -1}, factor = 350 * 2 * Math::PI / 60;
-  // conversion to [rad/s] for further calculations
-  VectorOperations<double>::mulScalar(rpmOffset, factor, rpmOffset, 4);
-  VectorOperations<double>::mulScalar(speedRws, 2 * Math::PI / 60, speedRws, 4);
-  double diffRwSpeed[4] = {0, 0, 0, 0};
-  VectorOperations<double>::subtract(speedRws, rpmOffset, diffRwSpeed, 4);
-  VectorOperations<double>::mulScalar(diffRwSpeed, acsParameters->rwHandlingParameters.inertiaWheel,
-                                      wheelMomentum, 4);
-  double gainNs = pointingLawParameters->gainNullspace;
-  double nullSpaceMatrix[4][4] = {{0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}};
-  MathOperations<double>::vecTransposeVecMatrix(acsParameters->rwMatrices.nullspace,
-                                                acsParameters->rwMatrices.nullspace,
-                                                *nullSpaceMatrix, 4);
-  MatrixOperations<double>::multiply(*nullSpaceMatrix, wheelMomentum, rwTrqNs, 4, 4, 1);
-  VectorOperations<double>::mulScalar(rwTrqNs, gainNs, rwTrqNs, 4);
-  VectorOperations<double>::mulScalar(rwTrqNs, -1, rwTrqNs, 4);
+  // convert magFieldB from uT to T
+  double magFieldBT[3] = {0, 0, 0};
+  VectorOperations<double>::mulScalar(magFieldB, 1e-6, magFieldBT, 3);
+
+  // calculate angular momentum of the satellite
+  double angMomentumSat[3] = {0, 0, 0};
+  MatrixOperations<double>::multiply(*(acsParameters->inertiaEIVE.inertiaMatrixDeployed), satRate,
+                                     angMomentumSat, 3, 3, 1);
+
+  // calculate angular momentum of the reaction wheels with respect to the nullspace RW speed
+  // relocate RW speed zero to nullspace RW speed
+  double refSpeedRws[4] = {0, 0, 0, 0};
+  VectorOperations<double>::mulScalar(acsParameters->rwMatrices.nullspaceVector,
+                                      pointingLawParameters->nullspaceSpeed, refSpeedRws, 4);
+  VectorOperations<double>::subtract(speedRws, refSpeedRws, speedRws, 4);
+  // convert speed from 10 RPM to 1 RPM
+  VectorOperations<double>::mulScalar(speedRws, 1e-1, speedRws, 4);
+  // convert to rad/s
+  VectorOperations<double>::mulScalar(speedRws, RPM_TO_RAD_PER_SEC, speedRws, 4);
+  // calculate angular momentum of each RW
+  double angMomentumRwU[4] = {0, 0, 0, 0};
+  VectorOperations<double>::mulScalar(speedRws, acsParameters->rwHandlingParameters.inertiaWheel,
+                                      angMomentumRwU, 4);
+  // convert RW angular momentum to body RF
+  double angMomentumRw[3] = {0, 0, 0};
+  MatrixOperations<double>::multiply(*(acsParameters->rwMatrices.alignmentMatrix), angMomentumRwU,
+                                     angMomentumRw, 3, 4, 1);
+
+  // calculate total angular momentum
+  double angMomentumTotal[3] = {0, 0, 0};
+  VectorOperations<double>::add(angMomentumSat, angMomentumRw, angMomentumTotal, 3);
+
+  // calculating momentum error
+  double deltaAngMomentum[3] = {0, 0, 0};
+  VectorOperations<double>::subtract(angMomentumTotal, pointingLawParameters->desatMomentumRef,
+                                     deltaAngMomentum, 3);
+
+  // resulting magnetic dipole command
+  double crossAngMomentumMagField[3] = {0, 0, 0};
+  VectorOperations<double>::cross(deltaAngMomentum, magFieldBT, crossAngMomentumMagField);
+  double factor =
+      pointingLawParameters->deSatGainFactor / VectorOperations<double>::norm(magFieldBT, 3);
+  VectorOperations<double>::mulScalar(crossAngMomentumMagField, factor, mgtDpDes, 3);
 }
 
 void PtgCtrl::rwAntistiction(ACS::SensorValues *sensorValues, int32_t *rwCmdSpeeds) {
@@ -169,15 +198,9 @@ void PtgCtrl::rwAntistiction(ACS::SensorValues *sensorValues, int32_t *rwCmdSpee
       if (rwCmdSpeeds[i] != 0) {
         if (rwCmdSpeeds[i] > -acsParameters->rwHandlingParameters.stictionSpeed &&
             rwCmdSpeeds[i] < acsParameters->rwHandlingParameters.stictionSpeed) {
-          if (currRwSpeed[i] == 0) {
-            if (rwCmdSpeeds[i] > 0) {
-              rwCmdSpeeds[i] = acsParameters->rwHandlingParameters.stictionSpeed;
-            } else if (rwCmdSpeeds[i] < 0) {
-              rwCmdSpeeds[i] = -acsParameters->rwHandlingParameters.stictionSpeed;
-            }
-          } else if (currRwSpeed[i] < -acsParameters->rwHandlingParameters.stictionSpeed) {
+          if (rwCmdSpeeds[i] > currRwSpeed[i]) {
             rwCmdSpeeds[i] = acsParameters->rwHandlingParameters.stictionSpeed;
-          } else if (currRwSpeed[i] > acsParameters->rwHandlingParameters.stictionSpeed) {
+          } else if (rwCmdSpeeds[i] < currRwSpeed[i]) {
             rwCmdSpeeds[i] = -acsParameters->rwHandlingParameters.stictionSpeed;
           }
         }