oh, its probably that..

print the rsync version
maybe rsync is too old for this
2023-12-12 13:59:28 +01:00 · 2023-12-12 13:50:57 +01:00 · 2023-12-12 13:29:16 +01:00 · 2023-12-12 13:16:57 +01:00 · 2023-12-11 15:06:18 +01:00 · 2023-12-11 14:26:18 +01:00
1051 changed files with 24973 additions and 15276 deletions
@@ -1,6 +1,14 @@
+# PyCharm and CLion
+/.idea/*
+!/.idea/runConfigurations
+!/.idea/cmake.xml
+!/.idea/codeStyles
+
+# Eclipse
 .cproject
 .project
 .settings
 .metadata

 /build*
+/cmake-build*
@@ -0,0 +1,14 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+    <codeStyleSettings language="CMake">
+      <indentOptions>
+        <option name="INDENT_SIZE" value="2" />
+        <option name="CONTINUATION_INDENT_SIZE" value="0" />
+        <option name="TAB_SIZE" value="2" />
+      </indentOptions>
+    </codeStyleSettings>
+  </code_scheme>
+</component>
@@ -0,0 +1,5 @@
+<component name="ProjectCodeStyleConfiguration">
+  <state>
+    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
+  </state>
+</component>
@@ -1,175 +0,0 @@
-# Changed from ASTP 1.1.0 to 1.2.0
-
-## API Changes
-
-### FSFW Architecture
-
- New src folder which contains all source files except the HAL, contributed code and test code
- External and internal API mostly stayed the same
- Folder names are now all smaller case: internalError was renamed to internalerror and
-  FreeRTOS was renamed to freertos
- Warning if optional headers are used but the modules was not added to the source files to compile
-
-### HAL
-
- HAL added back into FSFW. It is tightly bound to the FSFW, and compiling it as a static library
-  made using it more complicated than necessary
-
-## Bugfixes
-
-### FreeRTOS QueueMapManager
-
- Fixed a bug which causes the first generated Queue ID to be invalid
-
-## Enhancements
-
-### FSFW Architecture
-
- See API changes chapter. This change will keep the internal API consistent in the future
-
-# Changes from ASTP 1.0.0 to 1.1.0
-
-## API Changes
-
-### PUS
-
- Added PUS C support
- SUBSYSTEM_IDs added for PUS Services
- Added new Parameter which must be defined in config: fsfwconfig::FSFW_MAX_TM_PACKET_SIZE
-
-### ObjectManager
-
- - ObjectManager is now a singelton
-
-
-### Configuration
-
- Additional configuration option fsfwconfig::FSFW_MAX_TM_PACKET_SIZE which 
-  need to be specified in FSFWConfig.h
-
-### CMake
-
- Changed Cmake FSFW_ADDITIONAL_INC_PATH to FSFW_ADDITIONAL_INC_PATHS
-
-## Bugfixes 
-
- timemanager/TimeStamperIF.h: Timestamp config was not used correctly, leading to different timestamp sizes than configured in fsfwconfig::FSFW_MISSION_TIMESTAMP_SIZE
- TCP server fixes
-
-## Enhancements
-
-### FreeRTOS Queue Handles
-
- Fixed an internal issue how FreeRTOS MessageQueues were handled
-
-### Linux OSAL
-
- Better printf error messages
-
-### CMake
-
- Check for C++11 as mininimum required Version
-
-### Debug Output
-
- Changed Warning color to magenta, which is well readable on both dark and light mode IDEs
-
-
-# Changes from ASTP 0.0.1 to 1.0.0
-
-### Host OSAL
-
- Bugfix in MessageQueue, which caused the sender not to be set properly
-
-### FreeRTOS OSAL
-
- vRequestContextSwitchFromISR is declared extern "C" so it can be defined in
-a C file without issues
-
-### PUS Services
-
- It is now possible to change the message queue depth for the telecommand verification service (PUS1)
- The same is possible for the event reporting service (PUS5)
- PUS Health Service added, which allows to command and retrieve health via PUS packets
-
-
-### EnhancedControllerBase
-
- New base class for a controller which also implements HasActionsIF and HasLocalDataPoolIF
-
-### Local Pool
-
- Interface of LocalPools has changed. LocalPool is not a template anymore. Instead the size and
-bucket number of the pools per page and the number of pages are passed to the ctor instead of
-two ctor arguments and a template parameter
-
-### Parameter Service
-
- The API of the parameter service has been changed to prevent inconsistencies
-between documentation and actual code and to clarify usage.
- The parameter ID now consists of:
-	1. Domain ID (1 byte)
-	2. Unique Identifier (1 byte)
-	3. Linear Index (2 bytes)
-The linear index can be used for arrays as well as matrices.
-The parameter load command now explicitely expects the ECSS PTC and PFC
-information as well as  the rows and column number. Rows and column will
-default to one, which is equivalent to one scalar parameter (the most
-important use-case)
-   
-### File System Interface
-
- A new interfaces specifies the functions for a software object which exposes the file system of
-a given hardware to use message based file handling (e.g. PUS commanding)
-
-### Internal Error Reporter
-
- The new internal error reporter uses the local data pools. The pool IDs for
-the exisiting three error values and the new error set will be hardcoded for
-now, the the constructor for the internal error reporter just takes an object
-ID for now.
-
-### Device Handler Base
-
- There is an additional `PERFORM_OPERATION` step for the device handler base. It is important
-that DHB users adapt their polling sequence tables to perform this step. This steps allows for 
-a clear distinction between operation and communication steps
- setNormalDatapoolEntriesInvalid is not an abstract method and a default implementation was provided
- getTransitionDelayMs is now an abstract method
-
-### DeviceHandlerIF
-
- Typo for UNKNOWN_DEVICE_REPLY 
-
-### Events
-
- makeEvent function: Now takes three input parameters instead of two and
-allows setting a unique ID. Event.cpp source file removed, functions now
-defined in header directly. Namespaces renamed. Functions declared `constexpr`
-now
-
-### Commanding Service Base
-
- CSB uses the new fsfwconfig::FSFW_CSB_FIFO_DEPTH variable to determine  the FIFO depth for each 
-CSB instance. This variable has to be set in the FSFWConfig.h file
-
-### Service Interface
-
- Proper printf support contained in ServiceInterfacePrinter.h
- CPP ostream support now optional (can reduce executable size by 150 - 250 kB)
- Amalagated header which determines automatically which service interface to use depending on FSFWConfig.h configuration. 
-  Users can just use #include <fsfw/serviceinterface/ServiceInterface.h>
- If CPP streams are excluded, sif:: calls won't work anymore and need to be replaced by their printf counterparts. 
-  For the fsfw, this can be done by checking the processor define FSFW_CPP_OSTREAM_ENABLED from FSFWConfig.h. 
-  For mission code, developers need to replace sif:: calls by the printf counterparts, but only if the CPP stream are excluded. 
-  If this is not the case, everything should work as usual.
-
-### ActionHelper and ActionMessage
-
- ActionHelper finish function and ActionMessage::setCompletionReply now expects explicit 
-information whether to report a success or failure message instead of deriving it implicitely 
-from returnvalue
-
-### PUS Parameter Service 20
-
-Added PUS parameter service 20 (only custom subservices available).
@@ -0,0 +1,785 @@
+Change Log
+=======
+
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](http://keepachangelog.com/)
+and this project adheres to [Semantic Versioning](http://semver.org/).
+
+# [unreleased]
+
+## Fixes
+
+- The `PusTmCreator` API only accepted 255 bytes of source data. It can now accept source
+  data with a size limited only by the size of `size_t`.
+- Important bugfix in CFDP PDU header format: The entity length field and the transaction sequence
+  number fields stored the actual length of the field instead of the length minus 1 like specified
+  in the CFDP standard.
+- PUS Health Service: Size check for set health command.
+  Perform operation completion for announce health command.
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/746
+- Linux OSAL `getUptime` fix: Check validity of `/proc/uptime` file before reading uptime.
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/745
+- Small tweak for version getter
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/744
+- Important bugfix for `LocalPool::delete` function, where an overflow could possibly lead to UB.
+
+## Added
+
+- add CFDP subsystem ID
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/742
+- New object ID for persistent TM store PUS 15
+- `EventManager`: Add function to print all listeners.
+
+## Changed
+
+- Bump ETL version to 20.35.14
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/748
+- Renamed `PCDU_2` subsystem ID to `POWER_SWITCH_IF`.
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/743
+- Add new `PowerSwitchIF::SWITCH_UNKNOWN` returnvalue.
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/743
+- Assert that `FixedArrayList` is larger than 0 at compile time.
+  https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/740
+- `EventManager`: Queue depth is configurable now
+- `ActionHelper`: Allow execution of actions without additional data
+
+# [v6.0.0] 2023-02-10
+
+## Fixes
+
+- Mode Service: Add allowed subservice
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/739
+- `CService200ModeManagement`: Various bugfixes which lead to now execution complete being generated
+  on mode announcements, duplicate mode reply generated on announce commands, and the mode read
+  subservice not working properly.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/736
+- Memory leak fixes for the TCP/IP TMTC bridge.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/737
+- `Service9TimeManagement`: Fix the time dump at the `SET_TIME` subservice: Include clock timeval
+  seconds instead of uptime.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/726
+- HAL MGM3100 Handler: Use axis specific gain/scaling factors. Previously,
+  only the X scaling factor was used.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/724
+- HAL MGM3100 Handler: Z value was previously calculated with bytes of the X value.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/733
+- DHB `setNormalDatapoolEntriesInvalid`: The default implementation did not set the validity
+  to false correctly because the `read` and `write` calls were missing.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/728
+- PUS TMTC creator module: Sequence flags were set to continuation segment (0b00) instead
+  of the correct unsegmented flags (0b11) as specified in the standard.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/727
+- TC Scheduler Service 11: Add size and CRC check for contained TC.
+  Bug: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/issues/719
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/720
+- Only delete health table entry in `HealthHelper` destructor if
+  health table was set.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/710
+- I2C Bugfixes: Do not keep iterator as member and fix some incorrect handling with the iterator.
+  Also properly reset the reply size for successfull transfers and erroneous transfers.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/700
+- Bugfix for Serial Buffer Stream: Setting `doActive` to false now
+  actually fully disables printing.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/680
+- `TcpTmTcServer.cpp`: The server was actually not able to handle
+  CCSDS packets which were clumped together. This has been fixed now.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/673
+- `CServiceHealthCommanding`: Add announce all health info implementation
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/725
+- various fixes related to linux Unittests and memory leaks
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/715
+- small fix to allow teardown handling
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/713
+- fix compiler warning for fixed array list copy ctor
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/704
+- missing include
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/703
+- defaultconfig did not build anymore
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/702
+- hotfix
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/699
+- small fix for helper
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/698
+- missing retval conv
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/697
+- DHB Countdown Bug
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/693
+- doc corrections
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/687
+- better error printout
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/686
+- include correction
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/683
+- better warning for missing include paths
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/676
+- Service 11 regression
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/670
+
+## Added
+
+- Empty constructor for `CdsShortTimeStamper` which does not do an object manager registration.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/730
+- `Service9TimeManagement`: Add `DUMP_TIME` (129) subservice.
+- `TcpTmTcServer`: Allow setting the `SO_REUSEADDR` and `SO_REUSEPORT`
+  option on the TCP server. CTOR prototype has changed and expects an explicit
+  TCP configuration struct to be passed.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/722
+- `DleParser` helper class to parse DLE encoded packets from a byte stream.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/711
+- `UioMapper` is able to resolve symlinks now.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/709
+- Add new `UnsignedByteField` class
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/660
+- publish documentation for development and master branch
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/681
+- Add Linux HAL options
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/663
+- Expand SerializeIF
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/656
+- PUS Service 11: Additional Safety Check
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/666
+- improvements for auto-formatter script
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/665
+- provide a weak print char impl
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/674
+
+## Removed
+
+- now that doc server is up, remove markdown files
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/688
+- remove bsp specific code
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/679
+
+## Changes
+
+- `CService201HealthCommanding` renamed to `CServiceHealthCommanding`,
+  service ID customizable now. `CServiceHealthCommanding` expects configuration struct
+  `HealthServiceCfg` now
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/725
+- `AcceptsTelemetryIF`: `getReportReceptionQueue` is const now
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/712
+- Moved some container returnvalues to dedicated header and namespace
+  so they can be used without template specification.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/707
+- Remove default secondary header argument for
+  `uint16_t getTcSpacePacketIdFromApid(uint16_t apid, bool secondaryHeaderFlag)` and
+  `uint16_t getTmSpacePacketIdFromApid(uint16_t apid, bool secondaryHeaderFlag)`
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/689
+- Removed `HasReturnvaluesIF` class in favor of `returnvalue` namespace with `OK` and `FAILED`
+  constants.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/659
+- Overhaul of the TMTC stack, including various changes and improvements
+  for other modules
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/655
+  which also includes a migration guide
+- Bump Catch2 dependency to regular version `v3.1.0`
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/678
+- `SerialBufferAdapter`: Rename `setBuffer` to `setConstBuffer` and update
+  API to expect `const uint8_t*` accordingly.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/677
+- Remove the following user includes from `fsfw/events/Event.h` and
+  `fsfw/returnvalues/returnvalue.h`:
+  - `#include "events/subsystemIdRanges.h"`
+  - `#include "returnvalues/classIds.h"`
+  The user has to include those themselves now
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/675
+- `DeviceHandlerBase`: Set command sender before calling `buildCommandFromCommand`.
+  This allows finishing action commands immediately inside the function.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/672
+- `DeviceHandlerBase`: New signature of `handleDeviceTm` which expects
+  a `const SerializeIF&` and additional helper variant which expects `const uint8_t*`
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/671
+- Improvements for `AcceptsTelemetryIF` and `AcceptsTelecommandsIF`:
+  - Make functions `const` where it makes sense
+  - Add `const char* getName const` abstract function
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/684
+- Generic TMTC Bridge Update
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/734
+- comment tweak to event parser can read everything
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/732
+- CMakeLists file updates
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/731
+- improve srv20 error messages
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/723
+- I2C Linux: remove duplicate printout
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/718
+- printout handling improvements
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/717
+- vec getter, reset for content
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/716
+- updates for source sequence counter
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/714
+- SP reader getPacketData is const now
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/708
+- refactoring of serial drivers for linux
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/705
+- Local Pool Update Remove Add Data Ignore Fault Argument
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/701
+- Switch to new documentation server
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/694
+- Windows Tweaks
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/691
+- Refactor Local Pool API
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/667
+- group MGM data in local pool vectors
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/664
+
+
+## CFDP
+
+- Refactoring of CFDP stack which was done during implementation of the CFDP source and destination
+  handlers.
+   - New filesystem module, changes for filesystem abstraction `HasFileSystemIF` to better
+     fit requirements of CFDP
+   - New `HostFilesystem` implementation of the `HasFileSystemIF`
+   - New `cfdp::UserBase` class which is the abstraction for the CFDP user in an OBSW context.
+   - mib module for the CFDP stack
+   - PDU classes renamed from `...Serializer`/`...Deserializer` to `...Creator`/`...Reader`
+     respetively
+   - Renamed `TcDistributor` to `TcDistributorBase` to prevent confusion
+   - Refactored `TcDisitributorBase` to be more flexible and usable for CFDP distribution
+   - Renamed `CCSDSDistributor` to `CcsdsDistributor` and add feature which allows it
+     to remove the CCSDS header when routing a packet. This allows CCSDS agnostic receiver
+     implementation without an extra component
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/682
+
+# [v5.0.0] 2022-07-25
+
+## Changes
+
+- Renamed auto-formatting script to `auto-formatter.sh` and made it more robust.
+  If `cmake-format` is installed, it will also auto-format the `CMakeLists.txt` files now.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/625
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/626
+- Bump C++ required version to C++17. Every project which uses the FSFW and every modern
+  compiler supports it
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/622
+- New CMake option `FSFW_HAL_LINUX_ADD_LIBGPIOD` to specifically exclude `gpiod` code.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/572
+- HAL Devicehandlers: Periodic printout is run-time configurable now
+- `oneShotAction` flag in the `TestTask` class is not static anymore
+- `SimpleRingBuffer::writeData` now checks if the amount is larger than the total size of the 
+  Buffer and rejects such writeData calls with `returnvalue::FAILED`
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/586
+- Major update for version handling, using `git describe` to fetch version information with git.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/601
+  - Add helper functions provided by [`cmake-modules`](https://github.com/bilke/cmake-modules)
+    manually now. Those should not change too often and only a small subset is needed
+  - Separate folder for easier update and for distinction
+  - LICENSE file included
+  - use `int` for version numbers to allow unset or uninitialized version
+  - Initialize Version object with numbers set to -1
+  - Instead of hardcoding the git hash, it is now retrieved from git
+  - `Version` now allows specifying additional version information like the git SHA1 hash and the
+    versions since the last tag
+  - Additional information is set to the last part of the git describe output for `FSFW_VERSION` now.
+  - Version still need to be hand-updated if the FSFW is not included as a submodule for now.
+- IPC Message Queue Handling: Allow passing an optional `MqArgs` argument into the MessageQueue
+  creation call. It allows passing context information and an arbitrary user argument into
+  the message queue. Also streamlined and simplified `MessageQueue` implementation for all OSALs
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/583
+- Internal API change: Moved the `fsfw_hal` to the `src` folder and integration and internal
+  tests part of `fsfw_tests` to `src`. Unittests are now in a dedicated folder called `unittests`
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/653
+
+### Task Module Refactoring
+
+PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/636
+
+**Refactoring general task code**
+
+- There was a lot of duplicate/boilerplate code inside the individual task IF OSAL implementations.
+  Remove it by introducing base classes `PeriodicTaskBase` and `FixedTimeslotTaskBase`.
+
+**Refactor PeriodicTaskIF**
+
+- Convert `virtual ReturnValue_t addComponent(object_id_t object)` to
+  `virtual ReturnValue_t addComponent(object_id_t object, uint8_t opCode = 0)`, allowing to pass
+  the operation code passed to `performOperation`. Updated API taking
+  an `ExecutableObjectIF` accordingly
+
+**Refactor FixedTimeslotTaskIF**
+
+- Add additional `addSlot` function which takes an `ExecutableObjectIF` pointer and its Object ID
+
+**Refactor FixedSequenceSlot**
+
+- Introduce typedef `CustomCheckFunc` for `ReturnValue_t (*customCheckFunction)(const SlotList&)`.
+- Convert `ReturnValue_t (*customCheckFunction)(const SlotList&)` to
+  `ReturnValue_t (*customCheckFunction)(const SlotList&, void*)`, allowing arbitrary user arguments
+  for the custom checker
+
+**Linux Task Module**
+
+- Use composition instead of inheritance for the `PeriodicPosixTask` and make the `PosixTask` a
+  member of the class
+
+### HAL
+
+- HAL Linux Uart: Baudrate and bits per word are enums now, avoiding misconfigurations
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/585
+- HAL Linux SPI: Set the Clock Default State when setting new SPI speed
+  and mode
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/573
+- GPIO HAL: `Direction`, `GpioOperation` and `Levels` are enum classes now, which prevents
+  name clashes with Windows defines.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/572
+- HAL Linux Uart: Baudrate and bits per word are enums now, avoiding misconfigurations
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/585
+
+### Time
+
+PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/584 and
+https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/593
+
+- `timeval` to `TimeOfDay_t`
+- Added Mutex for gmtime calls: (compare http://www.opengate.at/blog/2020/01/timeless/)
+- Moved the statics used by Clock in ClockCommon.cpp to this file
+- Better check for leap seconds
+- Added Unittests for Clock (only getter)
+
+### Power 
+
+- `PowerSwitchIF`: Remove `const` specifier from `sendSwitchCommand` and `sendFuseOnCommand` and
+  also specify a `ReturnValue_t` return type
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/590
+- Extend `PowerSwitcher` module to optionally check current state when calling `turnOn` or
+  `turnOff`. Tis can be helpful to avoid commanding switches which do not need commanding
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/590
+
+## Removed
+
+- Removed the `HkSwitchHelper`. This module should not be needed anymore, now that the local
+  datapools have been implemented.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/557
+
+## Additions
+
+- New constructor for PoolEntry which allows to simply specify the length of the pool entry.
+  This is also the new default constructor for scalar value with 0 as an initial value
+- Added options for CI/CD builds: `FSFW_CICD_BUILD`. This allows the source code to know
+  whether it is running in CI/CD
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/623
+- Basic `clion` support: Update `.gitignore` and add some basic run configurations
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/625
+- LTO support: Allow using LTO/IPO by setting `FSFW_ENABLE_LTO=1`. CMake is able to detect whether
+  the user compiler supports IPO/LPO. LTO is on by default now. Most modern compilers support it,
+  can make good use of it and it usually makes the code faster and/or smaller.
+  After some more research:
+  Enabling LTO will actually cause the compiler to only produce thin LTO by adding 
+  `-flto -fno-fat-lto-objects` to the compiler options. I am not sure this is an ideal choice
+  because if an application linking against the FSFW does not use LTO, there can be compile
+  issues (e.g. observed when compiling the FSFW tests without LTO). This is a known issue as
+  can be seen in the multiple CMake issues for it: 
+    - https://gitlab.kitware.com/cmake/cmake/-/issues/22913, 
+    - https://gitlab.kitware.com/cmake/cmake/-/issues/16808, 
+    - https://gitlab.kitware.com/cmake/cmake/-/issues/21696
+  Easiest solution for now: Keep this option OFF by default.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/616
+- Linux HAL: Add wiretapping option for I2C. Enabled with `FSFW_HAL_I2C_WIRETAPPING` defined to 1
+- Dedicated Version class and constant `fsfw::FSFW_VERSION` containing version information
+  inside `fsfw/version.h`
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/559
+- Added generic PUS TC Scheduler Service 11. It depends on the new added Emebeded Template Library
+  (ETL) dependency.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/594
+- Added ETL dependency and improved library dependency management
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/592
+- Add a `DummyPowerSwitcher` module which can be useful for test setups when no PCDU is available
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/590
+- New typedef for switcher type
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/590
+- `Subsystem`: New API to add table and sequence entries
+
+## Fixed
+
+- TCP TMTC Server: `MutexGuard` was not created properly in
+  `TcpTmTcServer::handleTmSending(socket_t connSocket, bool& tmSent)` call.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/618
+- Fix infinite recursion in `prepareHealthSetReply` of PUS Health Service 201.
+  Is not currently used right now but might be used in the future
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/617
+- Move some CMake directives further up top so they are not ignored
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/621
+- Small bugfix in STM32 HAL for SPI
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/599
+- HAL GPIO: Improved error checking in `LinuxLibgpioIF::configureGpios(...)`. If a GPIO
+  configuration fails, the function will exit prematurely with a dedicated error code
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/602
+
+# [v4.0.0]
+
+## Additions
+
+- CFDP Packet Stack and related tests added. It also refactors the existing TMTC infastructure to
+  allow sending of CFDP packets to the CCSDS handlers.
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/528
+- added virtual function to print datasets
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/544
+- doSendRead Hook
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/545
+- Dockumentation for DHB
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/551
+  
+### HAL additions
+
+- Linux Command Executor, which can execute shell commands in blocking and non-blocking mode
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/536
+- uio Mapper
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/543
+
+## Changes
+
+- Applied the `clang-format` auto-formatter to all source code
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/534
+- Updated Catch2 to v3.0.0-preview4
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/538
+- Changed CI to use prebuilt docker image
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/549
+
+## Bugfix
+
+- CMake fixes in PR https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/533 , was problematic
+  if the uppermost user `CMakeLists.txt` did not have the include paths set up properly, which
+  could lead to compile errors that `#include "fsfw/FSFW.h"` was not found.
+- Fix for build regression in Catch2 v3.0.0-preview4
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/548
+- Fix in unittest which failed on CI
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/552
+- Fix in helper script
+  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/553
+
+## API Changes
+
+- Aforementioned changes to existing TMTC stack
+
+## Known bugs
+
+- 
+
+# [v3.0.1]
+
+## API Changes
+
+* 
+
+## Bugfixes
+
+* Version number was not updated for v3.0.0 #542
+
+## Enhancement
+
+* 
+
+## Known bugs
+
+* 
+
+# [v3.0.0]
+
+## API Changes
+
+#### TCP Socket Changes
+
+* Keep Open TCP Implementation #496
+    * The socket will now kept open after disconnect. This allows reconnecting. 
+    * Only one connection is allowed
+    * No internal influence but clients need to change their Code.
+
+### GPIO IF
+
+* Add feature to open GPIO by line name #506
+
+### Bitutil
+
+* Unittests for Op Divider and Bitutility #510
+
+### Filesystem IF changed
+
+*  Filesystem Base Interface: Use IF instead of void pointer #511 
+
+### STM32
+
+* STM32 SPI Updates #518
+
+## Bugfixes
+
+* Small bugfix for LIS3 handler #504
+* Spelling fixed for function names #509
+* CMakeLists fixes #517
+* Out of bound reads and writes in unittests #519
+* Bug in TmPacketStoredPusC (#478)
+* Windows ifdef fixed #529
+
+## Enhancement
+
+* FSFW.h.in more default values #491
+* Minor updates for PUS services #498
+* HasReturnvaluesIF naming for parameter #499
+* Tests can now be built as part of FSFW and versioning moved to CMake #500
+*  Added integration test code #508 
+* More printouts for rejected TC packets #505
+* Arrayprinter format improvements #514
+* Adding code for CI with docker and jenkins #520
+* Added new function in SerializeAdapter  #513
+    *  Enables simple deSerialize if you keep track of the buffer position yourself
+    *  `` static ReturnValue_t deSerialize(T *object, const uint8_t* buffer,
+            size_t* deserSize, SerializeIF::Endianness streamEndianness) ``
+* Unittest helper scripts has a new Parameter to open the coverage html in the webrowser  #525
+    * ``'-o', '--open', Open coverage data in webbrowser`` 
+* Documentation updated. Sphinx Documentation can now be build with python script #526
+
+## Known bugs
+
+* Version number was not updated for v3.0.0 #542
+
+
+All Pull Requests:
+
+Milestone: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/milestone/19
+
+# [v2.0.0]
+
+## API Changes
+
+
+### File Structure changed to fit more common structure
+
+* See pull request (#445)
+  * HAL is now part of the main project
+    * **See Instructions below:**
+
+#### Instruction how to update existing / user code
+
+* Changes in `#include`:
+  * Rename `internalError` in includes to `internalerror`
+  * Rename `fsfw/hal` to `fsfw_hal`
+  * Rename `fsfw/tests` to `fsfw_tests`
+  * Rename `osal/FreeRTOS` to `osal/freertos`
+
+* Changes in `CMakeLists.txt`: 
+  * Rename `OS_FSFW` to `FSFW_OSAL`
+
+* Changes in `DleEncoder.cpp`
+    * Create an instance of the `DleEncoder` first before calling the `encode` and `decode` functions
+
+### Removed osal/linux/Timer (#486)
+
+* Was redundant to timemanager/Countdown
+
+#### Instruction how to update existing / user code
+
+* Use timemanager/Countdown instead
+
+## Bugfixes
+
+### TM Stack
+
+* Increased TM stack robustness by introducing `nullptr` checks and more printouts (#483)
+
+#### Host OSAL / FreeRTOS 
+
+* QueueMapManager Bugfix (NO_QUEUE was used as MessageQueueId) (#444)
+
+#### Events
+
+* Event output is now consistent (#447)
+
+#### DLE Encoder
+
+* Fixed possible out of bounds access in DLE Encoder (#492)
+
+## Enhancment
+
+* HAL as major new feature, also includes three MEMS devicehandlers as part of #481
+* Linux HAL updates (#456)
+* FreeRTOS Header cleaning update and Cmake tweaks (#442)
+* Printer updates (#453)
+* New returnvalue for for empty PST (#485)
+* TMTC Bridge: Increase limit of packets stored (#484)
+
+## Known bugs
+
+* Bug in TmPacketStoredPusC (#478)
+
+
+All Pull Requests:
+
+Milestone: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/milestone/5
+
+# [v1.2.0]
+
+## API Changes
+
+### FSFW Architecture
+
+- New src folder which contains all source files except the HAL, contributed code and test code
+- External and internal API mostly stayed the same
+- Folder names are now all smaller case: internalError was renamed to internalerror and
+  FreeRTOS was renamed to freertos
+- Warning if optional headers are used but the modules was not added to the source files to compile
+
+### HAL
+
+- HAL added back into FSFW. It is tightly bound to the FSFW, and compiling it as a static library
+  made using it more complicated than necessary
+
+## Bugfixes
+
+### FreeRTOS QueueMapManager
+
+- Fixed a bug which causes the first generated Queue ID to be invalid
+
+## Enhancements
+
+### FSFW Architecture
+
+- See API changes chapter. This change will keep the internal API consistent in the future
+
+# [v1.1.0]
+
+## API Changes
+
+### PUS
+
+- Added PUS C support
+- SUBSYSTEM_IDs added for PUS Services
+- Added new Parameter which must be defined in config: fsfwconfig::FSFW_MAX_TM_PACKET_SIZE
+
+### ObjectManager
+
+ - ObjectManager is now a singelton
+
+
+### Configuration
+
+- Additional configuration option fsfwconfig::FSFW_MAX_TM_PACKET_SIZE which 
+  need to be specified in FSFWConfig.h
+
+### CMake
+
+- Changed Cmake FSFW_ADDITIONAL_INC_PATH to FSFW_ADDITIONAL_INC_PATHS
+
+## Bugfixes 
+
+- timemanager/TimeStamperIF.h: Timestamp config was not used correctly, leading to different timestamp sizes than configured in fsfwconfig::FSFW_MISSION_TIMESTAMP_SIZE
+- TCP server fixes
+
+## Enhancements
+
+### FreeRTOS Queue Handles
+
+- Fixed an internal issue how FreeRTOS MessageQueues were handled
+
+### Linux OSAL
+
+- Better printf error messages
+
+### CMake
+
+- Check for C++11 as mininimum required Version
+
+### Debug Output
+
+- Changed Warning color to magenta, which is well readable on both dark and light mode IDEs
+
+
+# Changes from ASTP 0.0.1 to 1.0.0
+
+### Host OSAL
+
+- Bugfix in MessageQueue, which caused the sender not to be set properly
+
+### FreeRTOS OSAL
+
+- vRequestContextSwitchFromISR is declared extern "C" so it can be defined in
+a C file without issues
+
+### PUS Services
+
+- It is now possible to change the message queue depth for the telecommand verification service (PUS1)
+- The same is possible for the event reporting service (PUS5)
+- PUS Health Service added, which allows to command and retrieve health via PUS packets
+
+
+### EnhancedControllerBase
+
+- New base class for a controller which also implements HasActionsIF and HasLocalDataPoolIF
+
+### Local Pool
+
+- Interface of LocalPools has changed. LocalPool is not a template anymore. Instead the size and
+bucket number of the pools per page and the number of pages are passed to the ctor instead of
+two ctor arguments and a template parameter
+
+### Parameter Service
+
+- The API of the parameter service has been changed to prevent inconsistencies
+between documentation and actual code and to clarify usage.
+- The parameter ID now consists of:
+	1. Domain ID (1 byte)
+	2. Unique Identifier (1 byte)
+	3. Linear Index (2 bytes)
+The linear index can be used for arrays as well as matrices.
+The parameter load command now explicitely expects the ECSS PTC and PFC
+information as well as  the rows and column number. Rows and column will
+default to one, which is equivalent to one scalar parameter (the most
+important use-case)
+   
+### File System Interface
+
+- A new interfaces specifies the functions for a software object which exposes the file system of
+a given hardware to use message based file handling (e.g. PUS commanding)
+
+### Internal Error Reporter
+
+- The new internal error reporter uses the local data pools. The pool IDs for
+the exisiting three error values and the new error set will be hardcoded for
+now, the the constructor for the internal error reporter just takes an object
+ID for now.
+
+### Device Handler Base
+
+- There is an additional `PERFORM_OPERATION` step for the device handler base. It is important
+that DHB users adapt their polling sequence tables to perform this step. This steps allows for 
+a clear distinction between operation and communication steps
+- setNormalDatapoolEntriesInvalid is not an abstract method and a default implementation was provided
+- getTransitionDelayMs is now an abstract method
+
+### DeviceHandlerIF
+
+- Typo for UNKNOWN_DEVICE_REPLY 
+
+### Events
+
+- makeEvent function: Now takes three input parameters instead of two and
+allows setting a unique ID. Event.cpp source file removed, functions now
+defined in header directly. Namespaces renamed. Functions declared `constexpr`
+now
+
+### Commanding Service Base
+
+- CSB uses the new fsfwconfig::FSFW_CSB_FIFO_DEPTH variable to determine  the FIFO depth for each 
+CSB instance. This variable has to be set in the FSFWConfig.h file
+
+### Service Interface
+
+- Proper printf support contained in ServiceInterfacePrinter.h
+- CPP ostream support now optional (can reduce executable size by 150 - 250 kB)
+- Amalagated header which determines automatically which service interface to use depending on FSFWConfig.h configuration. 
+  Users can just use #include <fsfw/serviceinterface/ServiceInterface.h>
+- If CPP streams are excluded, sif:: calls won't work anymore and need to be replaced by their printf counterparts. 
+  For the fsfw, this can be done by checking the processor define FSFW_CPP_OSTREAM_ENABLED from FSFWConfig.h. 
+  For mission code, developers need to replace sif:: calls by the printf counterparts, but only if the CPP stream are excluded. 
+  If this is not the case, everything should work as usual.
+
+### ActionHelper and ActionMessage
+
+- ActionHelper finish function and ActionMessage::setCompletionReply now expects explicit 
+information whether to report a success or failure message instead of deriving it implicitely 
+from returnvalue
+
+### PUS Parameter Service 20
+
+Added PUS parameter service 20 (only custom subservices available).
@@ -1,31 +1,130 @@
 cmake_minimum_required(VERSION 3.13)

-set(FSFW_VERSION 3)
-set(FSFW_SUBVERSION 0)
-set(FSFW_REVISION 1)
+set(MSG_PREFIX "fsfw |")

 # Add the cmake folder so the FindSphinx module is found
-set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake" ${CMAKE_MODULE_PATH})
+list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
+list(APPEND CMAKE_MODULE_PATH
+     "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake-modules/bilke")
+list(APPEND CMAKE_MODULE_PATH
+     "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake-modules/rpavlik")

-option(FSFW_GENERATE_SECTIONS
-    "Generate function and data sections. Required to remove unused code" ON
-)
-if(FSFW_GENERATE_SECTIONS)
-    option(FSFW_REMOVE_UNUSED_CODE "Remove unused code" ON)
+# ##############################################################################
+# Version file handling  #
+# ##############################################################################
+
+set(FSFW_VERSION_IF_GIT_FAILS 6)
+set(FSFW_SUBVERSION_IF_GIT_FAILS 0)
+set(FSFW_REVISION_IF_GIT_FAILS 0)
+
+set(FSFW_GIT_VER_HANDLING_OK FALSE)
+# Version handling
+if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/.git)
+  message(STATUS "${MSG_PREFIX} Determining version information with git")
+  include(FsfwHelpers)
+  determine_version_with_git("--exclude" "docker_*")
+  if(GIT_INFO)
+    set(FSFW_GIT_INFO
+        ${GIT_INFO}
+        CACHE STRING "Version information retrieved with git describe")
+    list(GET FSFW_GIT_INFO 1 FSFW_VERSION)
+    list(GET FSFW_GIT_INFO 2 FSFW_SUBVERSION)
+    list(GET FSFW_GIT_INFO 3 FSFW_REVISION)
+    list(GET FSFW_GIT_INFO 4 FSFW_VCS_INFO)
+    if(NOT FSFW_VERSION)
+      set(FSFW_VERSION ${FSFW_VERSION_IF_GIT_FAILS})
+    endif()
+    if(NOT FSFW_SUBVERSION)
+      set(FSFW_SUBVERSION ${FSFW_SUBVERSION_IF_GIT_FAILS})
+    endif()
+    if(NOT FSFW_REVISION)
+      set(FSFW_REVISION ${FSFW_REVISION_IF_GIT_FAILS})
+    endif()
+    set(FSFW_GIT_VER_HANDLING_OK TRUE)
+  else()
+    set(FSFW_GIT_VER_HANDLING_OK FALSE)
+  endif()
+endif()
+if(NOT FSFW_GIT_VER_HANDLING_OK)
+  set(FSFW_VERSION ${FSFW_VERSION_IF_GIT_FAILS})
+  set(FSFW_SUBVERSION ${FSFW_SUBVERSION_IF_GIT_FAILS})
+  set(FSFW_REVISION ${FSFW_REVISION_IF_GIT_FAILS})
 endif()

-option(FSFW_BUILD_UNITTESTS "Build unittest binary in addition to static library" OFF)
+set(LIB_FSFW_NAME fsfw)
+project(${LIB_FSFW_NAME}
+        VERSION ${FSFW_VERSION}.${FSFW_SUBVERSION}.${FSFW_REVISION})
+
+if(NOT CMAKE_CXX_STANDARD)
+  set(CMAKE_CXX_STANDARD 17)
+  set(CMAKE_CXX_STANDARD_REQUIRED True)
+elseif(${CMAKE_CXX_STANDARD} LESS 17)
+  message(
+    FATAL_ERROR
+      "${MSG_PREFIX} Compiling the FSFW requires a minimum of C++17 support")
+endif()
+
+set(FSFW_SOURCES_DIR "${CMAKE_SOURCE_DIR}/src/fsfw")
+
+set(FSFW_ETL_LIB_NAME etl)
+set(FSFW_ETL_LINK_TARGET etl::etl)
+set(FSFW_ETL_LIB_MAJOR_VERSION
+    20
+    CACHE STRING "ETL library major version requirement")
+set(FSFW_ETL_LIB_VERSION
+    ${FSFW_ETL_LIB_MAJOR_VERSION}.36.0
+    CACHE STRING "ETL library exact version requirement")
+set(FSFW_ETL_LINK_TARGET etl::etl)
+
+set(FSFW_CATCH2_LIB_MAJOR_VERSION
+    3
+    CACHE STRING "Catch2 library major version requirement")
+set(FSFW_CATCH2_LIB_VERSION
+    v${FSFW_CATCH2_LIB_MAJOR_VERSION}.3.2
+    CACHE STRING "Catch2 library exact version requirement")
+
+# Keep this off by default for now. See PR:
+# https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/616 for information which
+# keeping this on by default is problematic
+option(
+  FSFW_ENABLE_IPO
+  "Enable interprocedural optimization or link-time optimization if available"
+  OFF)
+if(FSFW_ENABLE_IPO)
+  include(CheckIPOSupported)
+  check_ipo_supported(RESULT IPO_SUPPORTED OUTPUT IPO_ERROR)
+  if(NOT IPO_SUPPORTED)
+    message(STATUS "FSFW | IPO/LTO not supported: ${IPO_ERROR}")
+  endif()
+endif()
+
+option(FSFW_GENERATE_SECTIONS
+       "Generate function and data sections. Required to remove unused code" ON)
+if(FSFW_GENERATE_SECTIONS)
+  option(FSFW_REMOVE_UNUSED_CODE "Remove unused code" ON)
+endif()
+
+option(FSFW_BUILD_TESTS
+       "Build unittest binary in addition to static library. Requires Catch2"
+       OFF)
+option(FSFW_CICD_BUILD "Build for CI/CD. This can disable problematic test" OFF)
 option(FSFW_BUILD_DOCS "Build documentation with Sphinx and Doxygen" OFF)
-if(FSFW_BUILD_UNITTESTS)
-    option(FSFW_TESTS_GEN_COV "Generate coverage data for unittests" ON)
+if(FSFW_BUILD_TESTS)
+  option(FSFW_TESTS_GEN_COV "Generate coverage data for unittests" ON)
 endif()

 option(FSFW_WARNING_SHADOW_LOCAL_GCC "Enable -Wshadow=local warning in GCC" ON)
 # Options to exclude parts of the FSFW from compilation.
 option(FSFW_ADD_INTERNAL_TESTS "Add internal unit tests" ON)
-option(FSFW_ADD_UNITTESTS "Add regular unittests. Requires Catch2" OFF)
 option(FSFW_ADD_HAL "Add Hardware Abstraction Layer" ON)

+if(UNIX)
+  option(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS "Add Linux peripheral drivers"
+         OFF)
+  option(FSFW_HAL_LINUX_ADD_LIBGPIOD "Attempt to add Linux GPIOD drivers" OFF)
+  option(FSFW_HAL_LINUX_ADD_SERIAL_DRIVERS "Add serial drivers" ON)
+endif()
+
 # Optional sources
 option(FSFW_ADD_PUS "Compile with PUS sources" ON)
 option(FSFW_ADD_MONITORING "Compile with monitoring components" ON)
@@ -38,54 +137,95 @@ option(FSFW_ADD_TMSTORAGE "Compile with tm storage components" OFF)
 # Contrib sources
 option(FSFW_ADD_SGP4_PROPAGATOR "Add SGP4 propagator code" OFF)

-set(LIB_FSFW_NAME fsfw)
 set(FSFW_TEST_TGT fsfw-tests)
 set(FSFW_DUMMY_TGT fsfw-dummy)

-project(${LIB_FSFW_NAME})
 add_library(${LIB_FSFW_NAME})

-if(FSFW_BUILD_UNITTESTS)
-    message(STATUS "Building the FSFW unittests in addition to the static library")
-    # Check whether the user has already installed Catch2 first
-    find_package(Catch2 3)
-    # Not installed, so use FetchContent to download and provide Catch2
-    if(NOT Catch2_FOUND)
-        include(FetchContent)
+if(IPO_SUPPORTED AND FSFW_ENABLE_IPO)
+  set_property(TARGET ${LIB_FSFW_NAME} PROPERTY INTERPROCEDURAL_OPTIMIZATION
+                                                TRUE)
+endif()

-        FetchContent_Declare(
-            Catch2
-            GIT_REPOSITORY https://github.com/catchorg/Catch2.git
-            GIT_TAG        v3.0.0-preview4
-        )
+if(FSFW_BUILD_TESTS)
+  message(
+    STATUS
+      "${MSG_PREFIX} Building the FSFW unittests in addition to the static library"
+  )
+  # Check whether the user has already installed Catch2 first
+  find_package(Catch2 ${FSFW_CATCH2_LIB_MAJOR_VERSION} QUIET)
+  # Not installed, so use FetchContent to download and provide Catch2
+  if(NOT Catch2_FOUND)
+    message(
+      STATUS
+        "${MSG_PREFIX} Catch2 installation not found. Downloading Catch2 library with FetchContent."
+    )
+    include(FetchContent)

-        FetchContent_MakeAvailable(Catch2)
-        #fixes regression -preview4, to be confirmed in later releases
-        set_target_properties(Catch2 PROPERTIES DEBUG_POSTFIX "")
-    endif()
+    FetchContent_Declare(
+      Catch2
+      GIT_REPOSITORY https://github.com/catchorg/Catch2.git
+      GIT_TAG ${FSFW_CATCH2_LIB_VERSION})

-    set(FSFW_CONFIG_PATH tests/src/fsfw_tests/unit/testcfg)
-    configure_file(tests/src/fsfw_tests/unit/testcfg/FSFWConfig.h.in FSFWConfig.h)
-    configure_file(tests/src/fsfw_tests/unit/testcfg/TestsConfig.h.in tests/TestsConfig.h)
+    list(APPEND FSFW_FETCH_CONTENT_TARGETS Catch2)
+  endif()

-    project(${FSFW_TEST_TGT} CXX C)
-    add_executable(${FSFW_TEST_TGT})
+  set(FSFW_CONFIG_PATH unittests/testcfg)
+  configure_file(unittests/testcfg/FSFWConfig.h.in FSFWConfig.h)
+  configure_file(unittests/testcfg/TestsConfig.h.in tests/TestsConfig.h)

-    if(FSFW_TESTS_GEN_COV)
-        message(STATUS "Generating coverage data for the library")
-        message(STATUS "Targets linking against ${LIB_FSFW_NAME} "
-            "will be compiled with coverage data as well"
-        )
-        include(FetchContent)
-        FetchContent_Declare(
-            cmake-modules
-            GIT_REPOSITORY https://github.com/bilke/cmake-modules.git
-        )
-        FetchContent_MakeAvailable(cmake-modules)
-        set(CMAKE_BUILD_TYPE "Debug")
-        list(APPEND CMAKE_MODULE_PATH ${cmake-modules_SOURCE_DIR})
-        include(CodeCoverage)
-    endif()
+  project(${FSFW_TEST_TGT} CXX C)
+  add_executable(${FSFW_TEST_TGT})
+  if(IPO_SUPPORTED AND FSFW_ENABLE_IPO)
+    set_property(TARGET ${FSFW_TEST_TGT} PROPERTY INTERPROCEDURAL_OPTIMIZATION
+                                                  TRUE)
+  endif()
+
+  if(FSFW_TESTS_GEN_COV)
+    message(STATUS "${MSG_PREFIX} Generating coverage data for the library")
+    message(STATUS "${MSG_PREFIX} Targets linking against ${LIB_FSFW_NAME} "
+                   "will be compiled with coverage data as well")
+    set(CMAKE_BUILD_TYPE "Debug")
+    include(CodeCoverage)
+  endif()
+endif()
+
+message(
+  STATUS
+    "${MSG_PREFIX} Finding and/or providing etl library with version ${FSFW_ETL_LIB_MAJOR_VERSION}"
+)
+
+# Check whether the user has already installed ETL first
+find_package(${FSFW_ETL_LIB_NAME} ${FSFW_ETL_LIB_MAJOR_VERSION} QUIET)
+# Not installed, so use FetchContent to download and provide etl
+if(NOT ${FSFW_ETL_LIB_NAME}_FOUND)
+  message(
+    STATUS
+      "${MSG_PREFIX} ETL installation not found. Downloading ETL with FetchContent."
+  )
+  include(FetchContent)
+
+  FetchContent_Declare(
+    ${FSFW_ETL_LIB_NAME}
+    GIT_REPOSITORY https://github.com/ETLCPP/etl
+    GIT_TAG ${FSFW_ETL_LIB_VERSION})
+
+  list(APPEND FSFW_FETCH_CONTENT_TARGETS ${FSFW_ETL_LIB_NAME})
+endif()
+
+# The documentation for FetchContent recommends declaring all the dependencies
+# before making them available. We make all declared dependency available here
+# after their declaration
+if(FSFW_FETCH_CONTENT_TARGETS)
+  FetchContent_MakeAvailable(${FSFW_FETCH_CONTENT_TARGETS})
+  if(TARGET ${FSFW_ETL_LIB_NAME})
+    add_library(${FSFW_ETL_LINK_TARGET} ALIAS ${FSFW_ETL_LIB_NAME})
+  endif()
+  if(TARGET Catch2)
+    # Fixes regression -preview4, to be confirmed in later releases Related
+    # GitHub issue: https://github.com/catchorg/Catch2/issues/2417
+    set_target_properties(Catch2 PROPERTIES DEBUG_POSTFIX "")
+  endif()
 endif()

 set(FSFW_CORE_INC_PATH "inc")
@@ -93,256 +233,250 @@ set(FSFW_CORE_INC_PATH "inc")
 set_property(CACHE FSFW_OSAL PROPERTY STRINGS host linux rtems freertos)

 # For configure files
-target_include_directories(${LIB_FSFW_NAME} PRIVATE
-    ${CMAKE_CURRENT_BINARY_DIR}
-)
-target_include_directories(${LIB_FSFW_NAME} INTERFACE
-    ${CMAKE_CURRENT_BINARY_DIR}
-)
-
-if(NOT CMAKE_CXX_STANDARD)
-    set(CMAKE_CXX_STANDARD 11)
-    set(CMAKE_CXX_STANDARD_REQUIRED True)
-elseif(${CMAKE_CXX_STANDARD} LESS 11)
-    message(FATAL_ERROR "Compiling the FSFW requires a minimum of C++11 support")
-endif()
+target_include_directories(${LIB_FSFW_NAME} PRIVATE ${CMAKE_CURRENT_BINARY_DIR})
+target_include_directories(${LIB_FSFW_NAME}
+                           INTERFACE ${CMAKE_CURRENT_BINARY_DIR})

 # Backwards comptability
 if(OS_FSFW AND NOT FSFW_OSAL)
-    message(WARNING "Please pass the FSFW OSAL as FSFW_OSAL instead of OS_FSFW")
-    set(FSFW_OSAL OS_FSFW)
+  message(
+    WARNING
+      "${MSG_PREFIX} Please pass the FSFW OSAL as FSFW_OSAL instead of OS_FSFW")
+  set(FSFW_OSAL OS_FSFW)
 endif()

 if(NOT FSFW_OSAL)
-	message(STATUS "No OS for FSFW via FSFW_OSAL set. Assuming host OS")
-	# Assume host OS and autodetermine from OS_FSFW
-	if(UNIX)
-		set(FSFW_OSAL  "linux" 
-			CACHE STRING 
-			"OS abstraction layer used in the FSFW"
-		)
-	elseif(WIN32)
-		set(FSFW_OSAL  "host" 
-			CACHE STRING "OS abstraction layer used in the FSFW"
-		)
-	endif()
-
+  message(STATUS "No OS for FSFW via FSFW_OSAL set. Assuming host OS")
+  # Assume host OS and autodetermine from OS_FSFW
+  if(UNIX)
+    set(FSFW_OSAL
+        "linux"
+        CACHE STRING "OS abstraction layer used in the FSFW")
+  elseif(WIN32)
+    set(FSFW_OSAL
+        "host"
+        CACHE STRING "OS abstraction layer used in the FSFW")
+  endif()
 endif()

 set(FSFW_OSAL_DEFINITION FSFW_OSAL_HOST)

 if(FSFW_OSAL MATCHES host)
-    set(FSFW_OS_NAME "Host")
-    set(FSFW_OSAL_HOST ON)
+  set(FSFW_OS_NAME "Host")
+  set(FSFW_OSAL_HOST ON)
 elseif(FSFW_OSAL MATCHES linux)
-    set(FSFW_OS_NAME "Linux")
-    set(FSFW_OSAL_LINUX ON)
+  set(FSFW_OS_NAME "Linux")
+  set(FSFW_OSAL_LINUX ON)
 elseif(FSFW_OSAL MATCHES freertos)
-    set(FSFW_OS_NAME "FreeRTOS")
-    set(FSFW_OSAL_FREERTOS ON)
-    target_link_libraries(${LIB_FSFW_NAME} PRIVATE
-        ${LIB_OS_NAME}
-    )
+  set(FSFW_OS_NAME "FreeRTOS")
+  set(FSFW_OSAL_FREERTOS ON)
+  target_link_libraries(${LIB_FSFW_NAME} PRIVATE ${LIB_OS_NAME})
 elseif(FSFW_OSAL STREQUAL rtems)
-    set(FSFW_OS_NAME "RTEMS")
-    set(FSFW_OSAL_RTEMS ON)
+  set(FSFW_OS_NAME "RTEMS")
+  set(FSFW_OSAL_RTEMS ON)
 else()
-    message(WARNING
-        "Invalid operating system for FSFW specified! Setting to host.."
-    )
-    set(FSFW_OS_NAME "Host")
-    set(OS_FSFW "host")
+  message(
+    WARNING
+      "${MSG_PREFIX} Invalid operating system for FSFW specified! Setting to host.."
+  )
+  set(FSFW_OS_NAME "Host")
+  set(OS_FSFW "host")
 endif()

 configure_file(src/fsfw/FSFW.h.in fsfw/FSFW.h)
 configure_file(src/fsfw/FSFWVersion.h.in fsfw/FSFWVersion.h)

-message(STATUS "Compiling FSFW for the ${FSFW_OS_NAME} operating system.")
+message(
+  STATUS "${MSG_PREFIX} Compiling FSFW for the ${FSFW_OS_NAME} operating system"
+)

 add_subdirectory(src)
-add_subdirectory(tests)
-if(FSFW_ADD_HAL)
-    add_subdirectory(hal)
-endif()
 add_subdirectory(contrib)
+if(FSFW_BUILD_TESTS)
+  add_subdirectory(unittests)
+endif()
 if(FSFW_BUILD_DOCS)
-    add_subdirectory(docs)
+  add_subdirectory(docs)
 endif()

-if(FSFW_BUILD_UNITTESTS)
-    if(FSFW_TESTS_GEN_COV)
-        if(CMAKE_COMPILER_IS_GNUCXX)
-            include(CodeCoverage)
+if(FSFW_BUILD_TESTS)
+  if(FSFW_TESTS_GEN_COV)
+    if(CMAKE_COMPILER_IS_GNUCXX)
+      include(CodeCoverage)

-            # Remove quotes.
-            separate_arguments(COVERAGE_COMPILER_FLAGS
-                NATIVE_COMMAND "${COVERAGE_COMPILER_FLAGS}"
-            )
+      # Remove quotes.
+      separate_arguments(COVERAGE_COMPILER_FLAGS NATIVE_COMMAND
+                         "${COVERAGE_COMPILER_FLAGS}")

-            # Add compile options manually, we don't want coverage for Catch2
-            target_compile_options(${FSFW_TEST_TGT} PRIVATE
-                "${COVERAGE_COMPILER_FLAGS}"
-            )
-            target_compile_options(${LIB_FSFW_NAME} PRIVATE
-                "${COVERAGE_COMPILER_FLAGS}"
-            )
+      # Add compile options manually, we don't want coverage for Catch2
+      target_compile_options(${FSFW_TEST_TGT}
+                             PRIVATE "${COVERAGE_COMPILER_FLAGS}")
+      target_compile_options(${LIB_FSFW_NAME}
+                             PRIVATE "${COVERAGE_COMPILER_FLAGS}")

-            # Exclude directories here
-            if(WIN32)
-                set(GCOVR_ADDITIONAL_ARGS
-                    "--exclude-throw-branches"
-                    "--exclude-unreachable-branches"
-                )
-                set(COVERAGE_EXCLUDES
-                    "/c/msys64/mingw64/*" "*/fsfw_hal/*"
-                )
-            elseif(UNIX)
-                set(COVERAGE_EXCLUDES
-                    "/usr/include/*" "/usr/bin/*" "Catch2/*"
-                    "/usr/local/include/*" "*/fsfw_tests/*"
-                    "*/catch2-src/*" "*/fsfw_hal/*"
-                )
-            endif()
+      # Exclude directories here
+      if(WIN32)
+        set(GCOVR_ADDITIONAL_ARGS "--exclude-throw-branches"
+                                  "--exclude-unreachable-branches")
+        set(COVERAGE_EXCLUDES "/c/msys64/mingw64/*" "*/fsfw_hal/*")
+      elseif(UNIX)
+        set(COVERAGE_EXCLUDES
+            "/usr/include/*"
+            "/usr/bin/*"
+            "Catch2/*"
+            "/usr/local/include/*"
+            "*/fsfw_tests/*"
+            "*/catch2-src/*"
+            "*/fsfw_hal/*"
+            "unittests/*")
+      endif()

-            target_link_options(${FSFW_TEST_TGT} PRIVATE
-                -fprofile-arcs
-                -ftest-coverage
-            )
-            target_link_options(${LIB_FSFW_NAME} PRIVATE
-                -fprofile-arcs
-                -ftest-coverage
-            )
-            # Need to specify this as an interface, otherwise there will the compile issues
-            target_link_options(${LIB_FSFW_NAME} INTERFACE
-                -fprofile-arcs
-                -ftest-coverage
-            )
+      target_link_options(${FSFW_TEST_TGT} PRIVATE -fprofile-arcs
+                          -ftest-coverage)
+      target_link_options(${LIB_FSFW_NAME} PRIVATE -fprofile-arcs
+                          -ftest-coverage)
+      # Need to specify this as an interface, otherwise there will the compile
+      # issues
+      target_link_options(${LIB_FSFW_NAME} INTERFACE -fprofile-arcs
+                          -ftest-coverage)

-            if(WIN32)
-                setup_target_for_coverage_gcovr_html(
-                    NAME ${FSFW_TEST_TGT}_coverage
-                    EXECUTABLE ${FSFW_TEST_TGT}
-                    DEPENDENCIES ${FSFW_TEST_TGT}
-                )
-            else()
-                setup_target_for_coverage_lcov(
-                    NAME ${FSFW_TEST_TGT}_coverage
-                    EXECUTABLE ${FSFW_TEST_TGT}
-                    DEPENDENCIES ${FSFW_TEST_TGT}
-                )
-            endif()
-        endif()
+      if(WIN32)
+        setup_target_for_coverage_gcovr_html(
+          NAME ${FSFW_TEST_TGT}_coverage EXECUTABLE ${FSFW_TEST_TGT}
+          DEPENDENCIES ${FSFW_TEST_TGT})
+      else()
+        setup_target_for_coverage_lcov(
+          NAME
+          ${FSFW_TEST_TGT}_coverage
+          EXECUTABLE
+          ${FSFW_TEST_TGT}
+          DEPENDENCIES
+          ${FSFW_TEST_TGT}
+          GENHTML_ARGS
+          --html-epilog
+          ${CMAKE_SOURCE_DIR}/unittests/lcov_epilog.html)
+      endif()
    endif()
-    target_link_libraries(${FSFW_TEST_TGT} PRIVATE Catch2::Catch2 ${LIB_FSFW_NAME})
+  endif()
+  target_link_libraries(${FSFW_TEST_TGT} PRIVATE Catch2::Catch2
+                                                 ${LIB_FSFW_NAME})
 endif()

-# The project CMakeLists file has to set the FSFW_CONFIG_PATH and add it.
-# If this is not given, we include the default configuration and emit a warning.
+# The project CMakeLists file has to set the FSFW_CONFIG_PATH and add it. If
+# this is not given, we include the default configuration and emit a warning.
 if(NOT FSFW_CONFIG_PATH)
-    set(DEF_CONF_PATH misc/defaultcfg/fsfwconfig)
-    if(NOT FSFW_BUILD_DOCS)
-        message(WARNING "Flight Software Framework configuration path not set!")
-        message(WARNING "Setting default configuration from ${DEF_CONF_PATH} ..")
-    endif()
-    add_subdirectory(${DEF_CONF_PATH})
-    set(FSFW_CONFIG_PATH ${DEF_CONF_PATH})
+  set(DEF_CONF_PATH misc/defaultcfg/fsfwconfig)
+  if(NOT FSFW_BUILD_DOCS)
+    message(
+      WARNING
+        "${MSG_PREFIX} Flight Software Framework configuration path FSFW_CONFIG_PATH not set"
+    )
+    message(
+      WARNING
+        "${MSG_PREFIX} Setting default configuration from ${DEF_CONF_PATH} ..")
+  endif()
+  add_subdirectory(${DEF_CONF_PATH})
+  set(FSFW_CONFIG_PATH ${DEF_CONF_PATH})
 endif()

-# FSFW might be part of a possibly complicated folder structure, so we 
-# extract the absolute path of the fsfwconfig folder.
+# FSFW might be part of a possibly complicated folder structure, so we extract
+# the absolute path of the fsfwconfig folder.
 if(IS_ABSOLUTE ${FSFW_CONFIG_PATH})
-	set(FSFW_CONFIG_PATH_ABSOLUTE ${FSFW_CONFIG_PATH})
+  set(FSFW_CONFIG_PATH_ABSOLUTE ${FSFW_CONFIG_PATH})
 else()
-	get_filename_component(FSFW_CONFIG_PATH_ABSOLUTE
-		${FSFW_CONFIG_PATH} REALPATH BASE_DIR ${CMAKE_SOURCE_DIR}
-	)
+  get_filename_component(FSFW_CONFIG_PATH_ABSOLUTE ${FSFW_CONFIG_PATH} REALPATH
+                         BASE_DIR ${CMAKE_SOURCE_DIR})
 endif()

 foreach(INCLUDE_PATH ${FSFW_ADDITIONAL_INC_PATHS})
-    if(IS_ABSOLUTE ${INCLUDE_PATH})
-        set(CURR_ABS_INC_PATH "${INCLUDE_PATH}")
-    else()
-        get_filename_component(CURR_ABS_INC_PATH
-            ${INCLUDE_PATH} REALPATH BASE_DIR ${CMAKE_SOURCE_DIR})
-    endif()
+  if(IS_ABSOLUTE ${INCLUDE_PATH})
+    set(CURR_ABS_INC_PATH "${INCLUDE_PATH}")
+  else()
+    get_filename_component(CURR_ABS_INC_PATH ${INCLUDE_PATH} REALPATH BASE_DIR
+                           ${CMAKE_SOURCE_DIR})
+  endif()

-    if(CMAKE_VERBOSE)
-        message(STATUS "FSFW include path: ${CURR_ABS_INC_PATH}")
-    endif()
+  if(CMAKE_VERBOSE)
+    message(STATUS "FSFW include path: ${CURR_ABS_INC_PATH}")
+  endif()

-    list(APPEND FSFW_ADD_INC_PATHS_ABS ${CURR_ABS_INC_PATH})
+  list(APPEND FSFW_ADD_INC_PATHS_ABS ${CURR_ABS_INC_PATH})
 endforeach()

 if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
-    if(NOT DEFINED FSFW_WARNING_FLAGS)
-	   set(FSFW_WARNING_FLAGS
-		  -Wall
-		  -Wextra
-		  -Wimplicit-fallthrough=1
-		  -Wno-unused-parameter
-		  -Wno-psabi
-        )
-    endif()
+  if(NOT DEFINED FSFW_WARNING_FLAGS)
+    set(FSFW_WARNING_FLAGS
+        -Wall
+        -Wextra
+        -Wimplicit-fallthrough=1
+        -Wno-unused-parameter
+        -Wno-psabi
+        -Wduplicated-cond # check for duplicate conditions
+        -Wduplicated-branches # check for duplicate branches
+        -Wlogical-op # Search for bitwise operations instead of logical
+        -Wnull-dereference # Search for NULL dereference
+        -Wundef # Warn if undefind marcos are used
+        -Wformat=2 # Format string problem detection
+        -Wformat-overflow=2 # Formatting issues in printf
+        -Wformat-truncation=2 # Formatting issues in printf
+        -Wformat-security # Search for dangerous printf operations
+        -Wstrict-overflow=3 # Warn if integer overflows might happen
+        -Warray-bounds=2 # Some array bounds violations will be found
+        -Wshift-overflow=2 # Search for bit left shift overflows (<c++14)
+        -Wcast-qual # Warn if the constness is cast away
+        -Wstringop-overflow=4
+        # -Wstack-protector # Emits a few false positives for low level access
+        # -Wconversion # Creates many false positives -Warith-conversion # Use
+        # with Wconversion to find more implicit conversions -fanalyzer # Should
+        # be used to look through problems
+    )
+  endif()

-    if(FSFW_GENERATE_SECTIONS)
-        target_compile_options(${LIB_FSFW_NAME} PRIVATE
-            "-ffunction-sections"
-            "-fdata-sections"
-        )
-    endif()
+  if(FSFW_GENERATE_SECTIONS)
+    target_compile_options(${LIB_FSFW_NAME} PRIVATE "-ffunction-sections"
+                                                    "-fdata-sections")
+  endif()
+
+  if(FSFW_REMOVE_UNUSED_CODE)
+    target_link_options(${LIB_FSFW_NAME} PRIVATE "Wl,--gc-sections")
+  endif()
+
+  if(FSFW_WARNING_SHADOW_LOCAL_GCC)
+    list(APPEND WARNING_FLAGS "-Wshadow=local")
+  endif()

-    if(FSFW_REMOVE_UNUSED_CODE)
-        target_link_options(${LIB_FSFW_NAME} PRIVATE
-            "Wl,--gc-sections"
-        )
-    endif()
-  
-    if(FSFW_WARNING_SHADOW_LOCAL_GCC)
-        list(APPEND WARNING_FLAGS "-Wshadow=local")
-    endif()
-	
 endif()

 if(CMAKE_CXX_COMPILER_ID STREQUAL "MSVC")
-	set(COMPILER_FLAGS "/permissive-")
+  set(COMPILER_FLAGS "/permissive-")
 endif()

 # Required include paths to compile the FSFW
-target_include_directories(${LIB_FSFW_NAME} INTERFACE 
-	${CMAKE_SOURCE_DIR}
-	${FSFW_CONFIG_PATH_ABSOLUTE}
-	${FSFW_CORE_INC_PATH}
-	${FSFW_ADD_INC_PATHS_ABS}
-)
+target_include_directories(
+  ${LIB_FSFW_NAME} INTERFACE ${CMAKE_SOURCE_DIR} ${FSFW_CONFIG_PATH_ABSOLUTE}
+                             ${FSFW_CORE_INC_PATH} ${FSFW_ADD_INC_PATHS_ABS})

-# Includes path required to compile FSFW itself as well
-# We assume that the fsfwconfig folder uses include relative to the project
-# root here!
-target_include_directories(${LIB_FSFW_NAME} PRIVATE 
-	${CMAKE_SOURCE_DIR}
-	${FSFW_CONFIG_PATH_ABSOLUTE}
-	${FSFW_CORE_INC_PATH}
-	${FSFW_ADD_INC_PATHS_ABS}
-)
+# Includes path required to compile FSFW itself as well We assume that the
+# fsfwconfig folder uses include relative to the project root here!
+target_include_directories(
+  ${LIB_FSFW_NAME} PRIVATE ${CMAKE_SOURCE_DIR} ${FSFW_CONFIG_PATH_ABSOLUTE}
+                           ${FSFW_CORE_INC_PATH} ${FSFW_ADD_INC_PATHS_ABS})

-target_compile_options(${LIB_FSFW_NAME} PRIVATE 
-	${FSFW_WARNING_FLAGS}
-	${COMPILER_FLAGS}
-)
+target_compile_options(${LIB_FSFW_NAME} PRIVATE ${FSFW_WARNING_FLAGS}
+                                                ${COMPILER_FLAGS})

-target_link_libraries(${LIB_FSFW_NAME} PRIVATE
-    ${FSFW_ADDITIONAL_LINK_LIBS}
-)
+target_link_libraries(${LIB_FSFW_NAME} PRIVATE ${FSFW_ADDITIONAL_LINK_LIBS})
+target_link_libraries(${LIB_FSFW_NAME} PUBLIC ${FSFW_ETL_LINK_TARGET})

-string(CONCAT POST_BUILD_COMMENT
+string(
+  CONCAT
+    POST_BUILD_COMMENT
    "######################################################################\n"
    "Built FSFW v${FSFW_VERSION}.${FSFW_SUBVERSION}.${FSFW_REVISION}, "
    "Target OSAL: ${FSFW_OS_NAME}\n"
-    "######################################################################\n"
-)
+    "######################################################################\n")

 add_custom_command(
-   TARGET ${LIB_FSFW_NAME}
-   POST_BUILD
-   COMMENT ${POST_BUILD_COMMENT}
-)
+  TARGET ${LIB_FSFW_NAME}
+  POST_BUILD
+  COMMENT ${POST_BUILD_COMMENT})
@@ -11,9 +11,15 @@ with Airbus Defence and Space GmbH.

 ## Quick facts

-The framework is designed for systems, which communicate with external devices, perform control loops, receive telecommands and send telemetry, and need to maintain a high level of availability. Therefore, a mode and health system provides control over the states of the software and the controlled devices. In addition, a simple mechanism of event based fault detection, isolation and recovery is implemented as well. 
+The framework is designed for systems, which communicate with external devices, perform control loops, 
+receive telecommands and send telemetry, and need to maintain a high level of availability. Therefore,
+a mode and health system provides control over the states of the software and the controlled devices.
+In addition, a simple mechanism of event based fault detection, isolation and recovery is implemented as well. 

-The FSFW provides abstraction layers for operating systems to provide a uniform operating system abstraction layer (OSAL). Some components of this OSAL are required internally by the FSFW but is also very useful for developers to implement the same application logic on different operating systems with a uniform interface.
+The FSFW provides abstraction layers for operating systems to provide a uniform operating system
+abstraction layer (OSAL). Some components of this OSAL are required internally by the FSFW but is
+also very useful for developers to implement the same application logic on different operating
+systems with a uniform interface.

 Currently, the FSFW provides the following OSALs:

@@ -45,6 +51,28 @@ A template configuration folder was provided and can be copied into the project
 a starting point. The [configuration section](docs/README-config.md#top) provides more specific 
 information about the possible options.

+## Prerequisites
+
+The Embedded Template Library (etl) is a dependency of the FSFW which is automatically
+installed and provided by the build system unless the correction version was installed.
+The current recommended version can be found inside the fsfw `CMakeLists.txt` file or by using
+`ccmake` and looking up the `FSFW_ETL_LIB_MAJOR_VERSION` variable.
+
+You can install the ETL library like this. On Linux, it might be necessary to add `sudo` before
+the install call:
+
+```cpp
+git clone https://github.com/ETLCPP/etl
+cd etl
+git checkout <currentRecommendedVersion>
+mkdir build && cd build
+cmake ..
+cmake --install .
+```
+
+It is recommended to install `20.27.2` or newer for the package version handling of
+ETL to work.
+
 ## Adding the library

 The following steps show how to add and use FSFW components. It is still recommended to
@@ -71,9 +99,9 @@ add and link against the FSFW library in general.

 4. Link against the FSFW library

-	```cmake
-	target_link_libraries(<YourProjectName> PRIVATE fsfw)
-	```
+   ```sh
+   target_link_libraries(${YourProjectName} PRIVATE fsfw)
+   ```

 5. It should now be possible use the FSFW as a static library from the user code.

@@ -83,6 +111,19 @@ The FSFW also has unittests which use the [Catch2 library](https://github.com/ca
 These are built by setting the CMake option `FSFW_BUILD_UNITTESTS` to `ON` or `TRUE`
 from your project `CMakeLists.txt` file or from the command line.

+You can install the Catch2 library, which prevents the build system to avoid re-downloading
+the dependency if the unit tests are completely rebuilt. The current recommended version
+can be found inside the fsfw `CMakeLists.txt` file or by using `ccmake` and looking up
+the `FSFW_CATCH2_LIB_VERSION` variable.
+
+```sh
+git clone https://github.com/catchorg/Catch2.git
+cd Catch2
+git checkout <currentRecommendedVersion>
+cmake -Bbuild -H. -DBUILD_TESTING=OFF
+sudo cmake --build build/ --target install
+```
+
 The fsfw-tests binary will be built as part of the static library and dropped alongside it.
 If the unittests are built, the library and the tests will be built with coverage information by
 default. This can be disabled by setting the `FSFW_TESTS_COV_GEN` option to `OFF` or `FALSE`.
@@ -90,15 +131,15 @@ default. This can be disabled by setting the `FSFW_TESTS_COV_GEN` option to `OFF
 You can use the following commands inside the `fsfw` folder to set up the build system

 ```sh
-mkdir build-Unittest && cd build-Unittest
-cmake -DFSFW_BUILD_UNITTESTS=ON -DFSFW_OSAL=host -DCMAKE_BUILD_TYPE=Debug ..
+mkdir build-tests && cd build-tests
+cmake -DFSFW_BUILD_TESTS=ON -DFSFW_OSAL=host -DCMAKE_BUILD_TYPE=Debug ..
 ```

 You can also use `-DFSFW_OSAL=linux` on Linux systems.

 Coverage data in HTML format can be generated using the `CodeCoverage`
 [CMake module](https://github.com/bilke/cmake-modules/tree/master).
-To build the unittests, run them and then generare the coverage data in this format,
+To build the unittests, run them and then generate the coverage data in this format,
 the following command can be used inside the build directory after the build system was set up

 ```sh
@@ -107,11 +148,50 @@ cmake --build . -- fsfw-tests_coverage -j

 The `coverage.py` script located in the `script` folder can also be used to do this conveniently.

+## Building the documentations
+
+The FSFW documentation is built using the tools Sphinx, doxygen and breathe based on the
+instructions provided in  [this blogpost](https://devblogs.microsoft.com/cppblog/clear-functional-c-documentation-with-sphinx-breathe-doxygen-cmake/). If you
+want to do this locally, set up the prerequisites first. This requires a ``python3``
+installation as well. Example here is for Ubuntu.
+
+```sh
+sudo apt-get install doxygen graphviz
+```
+
+And the following Python packages
+
+```sh
+python3 -m pip install sphinx breathe
+```
+
+You can set up a documentation build system using the following commands
+
+```sh
+mkdir build-docs && cd build-docs
+cmake -DFSFW_BUILD_DOCS=ON -DFSFW_OSAL=host ..
+```
+
+Then you can generate the documentation using
+
+```sh
+cmake --build . -- Sphinx -j
+```
+
+You can find the generated documentation inside the `docs/sphinx` folder inside the build
+folder. Simply open the `index.html` in the webbrowser of your choice.
+
+The `helper.py` script located in the script` folder can also be used to create, build
+and open the documentation conveniently. Try `helper.py -h for more information.
+
 ## Formatting the sources

 The formatting is done by the `clang-format` tool. The configuration is contained within the
 `.clang-format` file in the repository root. As long as `clang-format` is installed, you
-can run the `apply-clang-format.sh` helper script to format all source files consistently.
+can run the `auto-format.sh` helper script to format all source files consistently. Furthermore cmake-format is required to format CMake files which can be installed with:
+````sh
+sudo pip install cmakelang
+````

 ## Index

@@ -1,8 +1,32 @@
-FROM ubuntu:focal
+FROM ubuntu:latest

 RUN apt-get update
 RUN apt-get --yes upgrade

 #tzdata is a dependency, won't install otherwise
 ARG DEBIAN_FRONTEND=noninteractive
-RUN apt-get --yes install gcc g++ cmake make lcov git valgrind nano iputils-ping
+RUN apt-get --yes install gcc g++ cmake make lcov git valgrind nano iputils-ping python3 pip doxygen graphviz rsync
+
+# This should also install Sphinx
+COPY docs/requirements.txt .
+RUN python3 -m pip install -r requirements.txt
+RUN python3 -m pip install breathe
+
+RUN git clone https://github.com/catchorg/Catch2.git && \
+        cd Catch2 && \
+        git checkout v3.1.0 && \
+        cmake -Bbuild -H. -DBUILD_TESTING=OFF && \
+        cmake --build build/ --target install
+
+RUN git clone https://github.com/ETLCPP/etl.git && \
+        cd etl && \
+        git checkout 20.28.0 && \
+        cmake -B build . && \
+        cmake --install build/
+
+#ssh needs a valid user to work
+RUN adduser --uid 114 jenkins
+
+#add documentation server to known hosts
+RUN echo "|1|/LzCV4BuTmTb2wKnD146l9fTKgQ=|NJJtVjvWbtRt8OYqFgcYRnMQyVw= ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBNL8ssTonYtgiR/6RRlSIK9WU1ywOcJmxFTLcEblAwH7oifZzmYq3XRfwXrgfMpylEfMFYfCU8JRqtmi19xc21A=" >> /etc/ssh/ssh_known_hosts
+RUN echo "|1|CcBvBc3EG03G+XM5rqRHs6gK/Gg=|oGeJQ+1I8NGI2THIkJsW92DpTzs= ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBNL8ssTonYtgiR/6RRlSIK9WU1ywOcJmxFTLcEblAwH7oifZzmYq3XRfwXrgfMpylEfMFYfCU8JRqtmi19xc21A=" >> /etc/ssh/ssh_known_hosts
@@ -1,41 +1,133 @@
 pipeline {
    environment {
-        BUILDDIR = 'build-tests'
+        BUILDDIR_HOST = 'cmake-build-tests-host'
+        BUILDDIR_LINUX = 'cmake-build-tests-linux'
+        DOCDDIR = 'cmake-build-documentation'
    }
    agent {
-        docker { image 'fsfw-ci:d1'}
+        docker { 
+            image 'fsfw-ci:d12'
+            args '--network host --sysctl fs.mqueue.msg_max=100'
+        }
    }
    stages {
-        stage('Clean') {
-            steps {
-                sh 'rm -rf $BUILDDIR'
-            }
-        }
-        stage('Configure') {
-            steps {
-                dir(BUILDDIR) {
-                    sh 'cmake -DFSFW_OSAL=host -DFSFW_BUILD_UNITTESTS=ON ..'
+        stage('Host') {
+            stages{
+                stage('Clean') {
+                    steps {
+                        sh 'rm -rf $BUILDDIR_HOST'
+                    }
+                }
+                stage('Configure') {
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'cmake -DFSFW_OSAL=host -DFSFW_BUILD_TESTS=ON -DFSFW_CICD_BUILD=ON ..'
+                        }
+                    }
+                }
+                stage('Build') {
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'cmake --build . -j4'
+                        }
+                    }
+                }
+                stage('Unittests') {
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'cmake --build . -- fsfw-tests_coverage -j4'
+                        }
+                    }
+                }
+                stage('Valgrind') {
+                    steps {
+                        dir(BUILDDIR_HOST) {
+                            sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
+                        }
+                    }
                }
            }
        }
-        stage('Build') {
-            steps {
-                dir(BUILDDIR) {
-                    sh 'cmake --build . -j'
+        stage('Linux') {
+            stages{
+                stage('Clean') {
+                    steps {
+                        sh 'rm -rf $BUILDDIR_LINUX'
+                    }
+                }
+                stage('Configure') {
+                    steps {
+                        dir(BUILDDIR_LINUX) {
+                            sh 'cmake -DFSFW_OSAL=linux -DFSFW_BUILD_TESTS=ON -DFSFW_CICD_BUILD=ON ..'
+                        }
+                    }
+                }
+                stage('Build') {
+                    steps {
+                        dir(BUILDDIR_LINUX) {
+                            sh 'cmake --build . -j4'
+                        }
+                    }
+                }
+                stage('Unittests') {
+                    steps {
+                        dir(BUILDDIR_LINUX) {
+                            sh 'cmake --build . -- fsfw-tests_coverage -j4'
+                        }
+                    }
+                }
+                stage('Valgrind') {
+                    steps {
+                        dir(BUILDDIR_LINUX) {
+                            sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
+                        }
+                    }
                }
            }
        }
-        stage('Unittests') {
+        stage('Documentation') {
+            when {
+              anyOf {
+                branch 'development';
+                branch pattern: 'development-doc-deployment*'
+              }
+            }
            steps {
-                dir(BUILDDIR) {
-                    sh 'cmake --build . -- fsfw-tests_coverage -j'
+                sh 'rsync --version'
+                dir(DOCDDIR) {
+                    sh 'cmake -DFSFW_BUILD_DOCS=ON -DFSFW_OSAL=host ..'
+                    sh 'make Sphinx'
+                    sshagent(credentials: ['documentation-buildfix']) {
+                        sh 'rsync -r --delete docs/sphinx/* buildfix@documentation.irs.uni-stuttgart.de:/projects/fsfw/development'
+                    }
+                }
+                dir(BUILDDIR_LINUX) {
+                    sshagent(credentials: ['documentation-buildfix']) {
+                        sh 'rsync --mkpath -r --delete fsfw-tests_coverage/* buildfix@documentation.irs.uni-stuttgart.de:/projects/fsfw/coverage/development'
+                    }
                }
            }
        }
-        stage('Valgrind') {
+        stage('Master Documentation') {
+            when {
+              anyOf {
+                branch 'master';
+                branch pattern: 'master-doc-deployment*'
+              }
+            }
            steps {
-                dir(BUILDDIR) {
-                    sh 'valgrind --leak-check=full --error-exitcode=1 ./fsfw-tests'
+                sh 'rsync --version'
+                dir(DOCDDIR) {
+                    sh 'cmake -DFSFW_BUILD_DOCS=ON -DFSFW_OSAL=host ..'
+                    sh 'make Sphinx'
+                    sshagent(credentials: ['documentation-buildfix']) {
+                        sh 'rsync -r --delete docs/sphinx/* buildfix@documentation.irs.uni-stuttgart.de:/projects/fsfw/master'
+                    }
+                }
+                dir(BUILDDIR_LINUX) {
+                    sshagent(credentials: ['documentation-buildfix']) {
+                        sh 'rsync --mkpath -r --delete fsfw-tests_coverage/* buildfix@documentation.irs.uni-stuttgart.de:/projects/fsfw/coverage/master'
+                    }
                }
            }
        }
@@ -0,0 +1,28 @@
+# Determines the git version with git describe and returns it by setting
+# the GIT_INFO list in the parent scope. The list has the following entries
+# 1. Full version string
+# 2. Major version
+# 3. Minor version
+# 4. Revision
+# 5. git SHA hash and commits since tag
+function(determine_version_with_git)
+    include(GetGitRevisionDescription)
+    git_describe(VERSION ${ARGN})
+    string(FIND ${VERSION} "." VALID_VERSION)
+    if(VALID_VERSION EQUAL -1)
+        message(WARNING "Version string ${VERSION} retrieved with git describe is invalid")
+        return()
+    endif()
+    # Parse the version information into pieces.
+    string(REGEX REPLACE "^v([0-9]+)\\..*" "\\1" _VERSION_MAJOR "${VERSION}")
+    string(REGEX REPLACE "^v[0-9]+\\.([0-9]+).*" "\\1" _VERSION_MINOR "${VERSION}")
+    string(REGEX REPLACE "^v[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" _VERSION_PATCH "${VERSION}")
+    string(REGEX REPLACE "^v[0-9]+\\.[0-9]+\\.[0-9]+-(.*)" "\\1" VERSION_SHA1 "${VERSION}")
+    set(GIT_INFO ${VERSION})
+    list(APPEND GIT_INFO ${_VERSION_MAJOR})
+    list(APPEND GIT_INFO ${_VERSION_MINOR})
+    list(APPEND GIT_INFO ${_VERSION_PATCH})
+    list(APPEND GIT_INFO ${VERSION_SHA1})
+    set(GIT_INFO ${GIT_INFO} PARENT_SCOPE)
+    message(STATUS "${MSG_PREFIX} Set git version info into GIT_INFO from the git tag ${VERSION}")
+endfunction()
@@ -0,0 +1,7 @@
+The files in the `bilke` folder were manually copy and pasted from the
+[cmake-modules repository](https://github.com/bilke/cmake-modules). It was decided to do
+this because only a small subset of its provided functions are needed.
+
+The files in the `rpavlik` folder were manually copy and pasted from the
+[cmake-modules repository](https://github.com/rpavlik/cmake-modules). It was decided to do
+this because only a small subset of its provided functions are needed.
@@ -0,0 +1,719 @@
+# Copyright (c) 2012 - 2017, Lars Bilke
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+#    list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without
+#    specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# CHANGES:
+#
+# 2012-01-31, Lars Bilke
+# - Enable Code Coverage
+#
+# 2013-09-17, Joakim Söderberg
+# - Added support for Clang.
+# - Some additional usage instructions.
+#
+# 2016-02-03, Lars Bilke
+# - Refactored functions to use named parameters
+#
+# 2017-06-02, Lars Bilke
+# - Merged with modified version from github.com/ufz/ogs
+#
+# 2019-05-06, Anatolii Kurotych
+# - Remove unnecessary --coverage flag
+#
+# 2019-12-13, FeRD (Frank Dana)
+# - Deprecate COVERAGE_LCOVR_EXCLUDES and COVERAGE_GCOVR_EXCLUDES lists in favor
+#   of tool-agnostic COVERAGE_EXCLUDES variable, or EXCLUDE setup arguments.
+# - CMake 3.4+: All excludes can be specified relative to BASE_DIRECTORY
+# - All setup functions: accept BASE_DIRECTORY, EXCLUDE list
+# - Set lcov basedir with -b argument
+# - Add automatic --demangle-cpp in lcovr, if 'c++filt' is available (can be
+#   overridden with NO_DEMANGLE option in setup_target_for_coverage_lcovr().)
+# - Delete output dir, .info file on 'make clean'
+# - Remove Python detection, since version mismatches will break gcovr
+# - Minor cleanup (lowercase function names, update examples...)
+#
+# 2019-12-19, FeRD (Frank Dana)
+# - Rename Lcov outputs, make filtered file canonical, fix cleanup for targets
+#
+# 2020-01-19, Bob Apthorpe
+# - Added gfortran support
+#
+# 2020-02-17, FeRD (Frank Dana)
+# - Make all add_custom_target()s VERBATIM to auto-escape wildcard characters
+#   in EXCLUDEs, and remove manual escaping from gcovr targets
+#
+# 2021-01-19, Robin Mueller
+# - Add CODE_COVERAGE_VERBOSE option which will allow to print out commands which are run
+# - Added the option for users to set the GCOVR_ADDITIONAL_ARGS variable to supply additional
+#   flags to the gcovr command
+#
+# 2020-05-04, Mihchael Davis
+#     - Add -fprofile-abs-path to make gcno files contain absolute paths
+#     - Fix BASE_DIRECTORY not working when defined
+#     - Change BYPRODUCT from folder to index.html to stop ninja from complaining about double defines
+#
+# 2021-05-10, Martin Stump
+#     - Check if the generator is multi-config before warning about non-Debug builds
+#
+# 2022-02-22, Marko Wehle
+#     - Change gcovr output from -o <filename> for --xml <filename> and --html <filename> output respectively.
+#       This will allow for Multiple Output Formats at the same time by making use of GCOVR_ADDITIONAL_ARGS, e.g. GCOVR_ADDITIONAL_ARGS "--txt".
+#
+# USAGE:
+#
+# 1. Copy this file into your cmake modules path.
+#
+# 2. Add the following line to your CMakeLists.txt (best inside an if-condition
+#    using a CMake option() to enable it just optionally):
+#      include(CodeCoverage)
+#
+# 3. Append necessary compiler flags for all supported source files:
+#      append_coverage_compiler_flags()
+#    Or for specific target:
+#      append_coverage_compiler_flags_to_target(YOUR_TARGET_NAME)
+#
+# 3.a (OPTIONAL) Set appropriate optimization flags, e.g. -O0, -O1 or -Og
+#
+# 4. If you need to exclude additional directories from the report, specify them
+#    using full paths in the COVERAGE_EXCLUDES variable before calling
+#    setup_target_for_coverage_*().
+#    Example:
+#      set(COVERAGE_EXCLUDES
+#          '${PROJECT_SOURCE_DIR}/src/dir1/*'
+#          '/path/to/my/src/dir2/*')
+#    Or, use the EXCLUDE argument to setup_target_for_coverage_*().
+#    Example:
+#      setup_target_for_coverage_lcov(
+#          NAME coverage
+#          EXECUTABLE testrunner
+#          EXCLUDE "${PROJECT_SOURCE_DIR}/src/dir1/*" "/path/to/my/src/dir2/*")
+#
+# 4.a NOTE: With CMake 3.4+, COVERAGE_EXCLUDES or EXCLUDE can also be set
+#     relative to the BASE_DIRECTORY (default: PROJECT_SOURCE_DIR)
+#     Example:
+#       set(COVERAGE_EXCLUDES "dir1/*")
+#       setup_target_for_coverage_gcovr_html(
+#           NAME coverage
+#           EXECUTABLE testrunner
+#           BASE_DIRECTORY "${PROJECT_SOURCE_DIR}/src"
+#           EXCLUDE "dir2/*")
+#
+# 5. Use the functions described below to create a custom make target which
+#    runs your test executable and produces a code coverage report.
+#
+# 6. Build a Debug build:
+#      cmake -DCMAKE_BUILD_TYPE=Debug ..
+#      make
+#      make my_coverage_target
+#
+
+include(CMakeParseArguments)
+
+option(CODE_COVERAGE_VERBOSE "Verbose information" FALSE)
+
+# Check prereqs
+find_program( GCOV_PATH gcov )
+find_program( LCOV_PATH  NAMES lcov lcov.bat lcov.exe lcov.perl)
+find_program( FASTCOV_PATH NAMES fastcov fastcov.py )
+find_program( GENHTML_PATH NAMES genhtml genhtml.perl genhtml.bat )
+find_program( GCOVR_PATH gcovr )
+find_program( CPPFILT_PATH NAMES c++filt )
+
+if(NOT GCOV_PATH)
+    message(FATAL_ERROR "gcov not found! Aborting...")
+endif() # NOT GCOV_PATH
+
+get_property(LANGUAGES GLOBAL PROPERTY ENABLED_LANGUAGES)
+list(GET LANGUAGES 0 LANG)
+
+if("${CMAKE_${LANG}_COMPILER_ID}" MATCHES "(Apple)?[Cc]lang")
+    if("${CMAKE_${LANG}_COMPILER_VERSION}" VERSION_LESS 3)
+        message(FATAL_ERROR "Clang version must be 3.0.0 or greater! Aborting...")
+    endif()
+elseif(NOT CMAKE_COMPILER_IS_GNUCXX)
+    if("${CMAKE_Fortran_COMPILER_ID}" MATCHES "[Ff]lang")
+        # Do nothing; exit conditional without error if true
+    elseif("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
+        # Do nothing; exit conditional without error if true
+    else()
+        message(FATAL_ERROR "Compiler is not GNU gcc! Aborting...")
+    endif()
+endif()
+
+set(COVERAGE_COMPILER_FLAGS "-g -fprofile-arcs -ftest-coverage"
+    CACHE INTERNAL "")
+if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
+    include(CheckCXXCompilerFlag)
+    check_cxx_compiler_flag(-fprofile-abs-path HAVE_fprofile_abs_path)
+    if(HAVE_fprofile_abs_path)
+        set(COVERAGE_COMPILER_FLAGS "${COVERAGE_COMPILER_FLAGS} -fprofile-abs-path")
+    endif()
+endif()
+
+set(CMAKE_Fortran_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the Fortran compiler during coverage builds."
+    FORCE )
+set(CMAKE_CXX_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C++ compiler during coverage builds."
+    FORCE )
+set(CMAKE_C_FLAGS_COVERAGE
+    ${COVERAGE_COMPILER_FLAGS}
+    CACHE STRING "Flags used by the C compiler during coverage builds."
+    FORCE )
+set(CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used for linking binaries during coverage builds."
+    FORCE )
+set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
+    ""
+    CACHE STRING "Flags used by the shared libraries linker during coverage builds."
+    FORCE )
+mark_as_advanced(
+    CMAKE_Fortran_FLAGS_COVERAGE
+    CMAKE_CXX_FLAGS_COVERAGE
+    CMAKE_C_FLAGS_COVERAGE
+    CMAKE_EXE_LINKER_FLAGS_COVERAGE
+    CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
+
+get_property(GENERATOR_IS_MULTI_CONFIG GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
+if(NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG))
+    message(WARNING "Code coverage results with an optimised (non-Debug) build may be misleading")
+endif() # NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG)
+
+if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_Fortran_COMPILER_ID STREQUAL "GNU")
+    link_libraries(gcov)
+endif()
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_lcov(
+#     NAME testrunner_coverage                    # New target name
+#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES testrunner                     # Dependencies to build first
+#     BASE_DIRECTORY "../"                        # Base directory for report
+#                                                 #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"           # Patterns to exclude (can be relative
+#                                                 #  to BASE_DIRECTORY, with CMake 3.4+)
+#     NO_DEMANGLE                                 # Don't demangle C++ symbols
+#                                                 #  even if c++filt is found
+# )
+function(setup_target_for_coverage_lcov)
+
+    set(options NO_DEMANGLE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES LCOV_ARGS GENHTML_ARGS)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT LCOV_PATH)
+        message(FATAL_ERROR "lcov not found! Aborting...")
+    endif() # NOT LCOV_PATH
+
+    if(NOT GENHTML_PATH)
+        message(FATAL_ERROR "genhtml not found! Aborting...")
+    endif() # NOT GENHTML_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(LCOV_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_LCOV_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND LCOV_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES LCOV_EXCLUDES)
+
+    # Conditional arguments
+    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
+      set(GENHTML_EXTRA_ARGS "--demangle-cpp")
+    endif()
+     
+    # Setting up commands which will be run to generate coverage data.
+    # Cleanup lcov
+    set(LCOV_CLEAN_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -directory . 
+        -b ${BASEDIR} --zerocounters
+    )
+    # Create baseline to make sure untouched files show up in the report
+    set(LCOV_BASELINE_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -c -i -d . -b 
+        ${BASEDIR} -o ${Coverage_NAME}.base
+    )
+    # Run tests
+    set(LCOV_EXEC_TESTS_CMD 
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )    
+    # Capturing lcov counters and generating report
+    set(LCOV_CAPTURE_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --directory . -b 
+        ${BASEDIR} --capture --output-file ${Coverage_NAME}.capture
+    )
+    # add baseline counters
+    set(LCOV_BASELINE_COUNT_CMD
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -a ${Coverage_NAME}.base 
+        -a ${Coverage_NAME}.capture --output-file ${Coverage_NAME}.total
+    ) 
+    # filter collected data to final coverage report
+    set(LCOV_FILTER_CMD 
+        ${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --remove 
+        ${Coverage_NAME}.total ${LCOV_EXCLUDES} --output-file ${Coverage_NAME}.info
+    )    
+    # Generate HTML output
+    set(LCOV_GEN_HTML_CMD
+        ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS} -o 
+        ${Coverage_NAME} ${Coverage_NAME}.info
+    )
+    
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+        message(STATUS "Command to clean up lcov: ")
+        string(REPLACE ";" " " LCOV_CLEAN_CMD_SPACED "${LCOV_CLEAN_CMD}")
+        message(STATUS "${LCOV_CLEAN_CMD_SPACED}")
+
+        message(STATUS "Command to create baseline: ")
+        string(REPLACE ";" " " LCOV_BASELINE_CMD_SPACED "${LCOV_BASELINE_CMD}")
+        message(STATUS "${LCOV_BASELINE_CMD_SPACED}")
+
+        message(STATUS "Command to run the tests: ")
+        string(REPLACE ";" " " LCOV_EXEC_TESTS_CMD_SPACED "${LCOV_EXEC_TESTS_CMD}")
+        message(STATUS "${LCOV_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to capture counters and generate report: ")
+        string(REPLACE ";" " " LCOV_CAPTURE_CMD_SPACED "${LCOV_CAPTURE_CMD}")
+        message(STATUS "${LCOV_CAPTURE_CMD_SPACED}")
+
+        message(STATUS "Command to add baseline counters: ")
+        string(REPLACE ";" " " LCOV_BASELINE_COUNT_CMD_SPACED "${LCOV_BASELINE_COUNT_CMD}")
+        message(STATUS "${LCOV_BASELINE_COUNT_CMD_SPACED}")
+
+        message(STATUS "Command to filter collected data: ")
+        string(REPLACE ";" " " LCOV_FILTER_CMD_SPACED "${LCOV_FILTER_CMD}")
+        message(STATUS "${LCOV_FILTER_CMD_SPACED}")
+
+        message(STATUS "Command to generate lcov HTML output: ")
+        string(REPLACE ";" " " LCOV_GEN_HTML_CMD_SPACED "${LCOV_GEN_HTML_CMD}")
+        message(STATUS "${LCOV_GEN_HTML_CMD_SPACED}")
+    endif()
+
+    # Setup target
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${LCOV_CLEAN_CMD}
+        COMMAND ${LCOV_BASELINE_CMD} 
+        COMMAND ${LCOV_EXEC_TESTS_CMD}
+        COMMAND ${LCOV_CAPTURE_CMD}
+        COMMAND ${LCOV_BASELINE_COUNT_CMD}
+        COMMAND ${LCOV_FILTER_CMD} 
+        COMMAND ${LCOV_GEN_HTML_CMD}
+
+        # Set output files as GENERATED (will be removed on 'make clean')
+        BYPRODUCTS
+            ${Coverage_NAME}.base
+            ${Coverage_NAME}.capture
+            ${Coverage_NAME}.total
+            ${Coverage_NAME}.info
+            ${Coverage_NAME}/index.html
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
+    )
+
+    # Show where to find the lcov info report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Lcov code coverage info report saved in ${Coverage_NAME}.info."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
+    )
+
+endfunction() # setup_target_for_coverage_lcov
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_gcovr_xml(
+#     NAME ctest_coverage                    # New target name
+#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES executable_target         # Dependencies to build first
+#     BASE_DIRECTORY "../"                   # Base directory for report
+#                                            #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
+#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
+# )
+# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
+# GCVOR command.
+function(setup_target_for_coverage_gcovr_xml)
+
+    set(options NONE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT GCOVR_PATH)
+        message(FATAL_ERROR "gcovr not found! Aborting...")
+    endif() # NOT GCOVR_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(GCOVR_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
+
+    # Combine excludes to several -e arguments
+    set(GCOVR_EXCLUDE_ARGS "")
+    foreach(EXCLUDE ${GCOVR_EXCLUDES})
+        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
+        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
+    endforeach()
+    
+    # Set up commands which will be run to generate coverage data
+    # Run tests
+    set(GCOVR_XML_EXEC_TESTS_CMD
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )
+    # Running gcovr
+    set(GCOVR_XML_CMD
+        ${GCOVR_PATH} --xml ${Coverage_NAME}.xml -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
+        ${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
+    )
+    
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+
+        message(STATUS "Command to run tests: ")
+        string(REPLACE ";" " " GCOVR_XML_EXEC_TESTS_CMD_SPACED "${GCOVR_XML_EXEC_TESTS_CMD}")
+        message(STATUS "${GCOVR_XML_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to generate gcovr XML coverage data: ")
+        string(REPLACE ";" " " GCOVR_XML_CMD_SPACED "${GCOVR_XML_CMD}")
+        message(STATUS "${GCOVR_XML_CMD_SPACED}")
+    endif()
+
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${GCOVR_XML_EXEC_TESTS_CMD}
+        COMMAND ${GCOVR_XML_CMD}
+        
+        BYPRODUCTS ${Coverage_NAME}.xml
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Running gcovr to produce Cobertura code coverage report."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Cobertura code coverage report saved in ${Coverage_NAME}.xml."
+    )
+endfunction() # setup_target_for_coverage_gcovr_xml
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_gcovr_html(
+#     NAME ctest_coverage                    # New target name
+#     EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES executable_target         # Dependencies to build first
+#     BASE_DIRECTORY "../"                   # Base directory for report
+#                                            #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/*" "src/dir2/*"      # Patterns to exclude (can be relative
+#                                            #  to BASE_DIRECTORY, with CMake 3.4+)
+# )
+# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
+# GCVOR command.
+function(setup_target_for_coverage_gcovr_html)
+
+    set(options NONE)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT GCOVR_PATH)
+        message(FATAL_ERROR "gcovr not found! Aborting...")
+    endif() # NOT GCOVR_PATH
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(DEFINED Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (CMake 3.4+: Also compute absolute paths)
+    set(GCOVR_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
+        if(CMAKE_VERSION VERSION_GREATER 3.4)
+            get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
+        endif()
+        list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
+
+    # Combine excludes to several -e arguments
+    set(GCOVR_EXCLUDE_ARGS "")
+    foreach(EXCLUDE ${GCOVR_EXCLUDES})
+        list(APPEND GCOVR_EXCLUDE_ARGS "-e")
+        list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
+    endforeach()
+
+    # Set up commands which will be run to generate coverage data
+    # Run tests
+    set(GCOVR_HTML_EXEC_TESTS_CMD
+        ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
+    )
+    # Create folder
+    set(GCOVR_HTML_FOLDER_CMD
+        ${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/${Coverage_NAME}
+    )
+    # Running gcovr
+    set(GCOVR_HTML_CMD
+        ${GCOVR_PATH} --html ${Coverage_NAME}/index.html --html-details -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
+        ${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
+    )
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Executed command report")
+
+        message(STATUS "Command to run tests: ")
+        string(REPLACE ";" " " GCOVR_HTML_EXEC_TESTS_CMD_SPACED "${GCOVR_HTML_EXEC_TESTS_CMD}")
+        message(STATUS "${GCOVR_HTML_EXEC_TESTS_CMD_SPACED}")
+
+        message(STATUS "Command to create a folder: ")
+        string(REPLACE ";" " " GCOVR_HTML_FOLDER_CMD_SPACED "${GCOVR_HTML_FOLDER_CMD}")
+        message(STATUS "${GCOVR_HTML_FOLDER_CMD_SPACED}")
+
+        message(STATUS "Command to generate gcovr HTML coverage data: ")
+        string(REPLACE ";" " " GCOVR_HTML_CMD_SPACED "${GCOVR_HTML_CMD}")
+        message(STATUS "${GCOVR_HTML_CMD_SPACED}")
+    endif()
+
+    add_custom_target(${Coverage_NAME}
+        COMMAND ${GCOVR_HTML_EXEC_TESTS_CMD}
+        COMMAND ${GCOVR_HTML_FOLDER_CMD}
+        COMMAND ${GCOVR_HTML_CMD}
+
+        BYPRODUCTS ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html  # report directory
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Running gcovr to produce HTML code coverage report."
+    )
+
+    # Show info where to find the report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ;
+        COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
+    )
+
+endfunction() # setup_target_for_coverage_gcovr_html
+
+# Defines a target for running and collection code coverage information
+# Builds dependencies, runs the given executable and outputs reports.
+# NOTE! The executable should always have a ZERO as exit code otherwise
+# the coverage generation will not complete.
+#
+# setup_target_for_coverage_fastcov(
+#     NAME testrunner_coverage                    # New target name
+#     EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
+#     DEPENDENCIES testrunner                     # Dependencies to build first
+#     BASE_DIRECTORY "../"                        # Base directory for report
+#                                                 #  (defaults to PROJECT_SOURCE_DIR)
+#     EXCLUDE "src/dir1/" "src/dir2/"             # Patterns to exclude.
+#     NO_DEMANGLE                                 # Don't demangle C++ symbols
+#                                                 #  even if c++filt is found
+#     SKIP_HTML                                   # Don't create html report
+#     POST_CMD perl -i -pe s!${PROJECT_SOURCE_DIR}/!!g ctest_coverage.json  # E.g. for stripping source dir from file paths
+# )
+function(setup_target_for_coverage_fastcov)
+
+    set(options NO_DEMANGLE SKIP_HTML)
+    set(oneValueArgs BASE_DIRECTORY NAME)
+    set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES FASTCOV_ARGS GENHTML_ARGS POST_CMD)
+    cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
+
+    if(NOT FASTCOV_PATH)
+        message(FATAL_ERROR "fastcov not found! Aborting...")
+    endif()
+
+    if(NOT Coverage_SKIP_HTML AND NOT GENHTML_PATH)
+        message(FATAL_ERROR "genhtml not found! Aborting...")
+    endif()
+
+    # Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
+    if(Coverage_BASE_DIRECTORY)
+        get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
+    else()
+        set(BASEDIR ${PROJECT_SOURCE_DIR})
+    endif()
+
+    # Collect excludes (Patterns, not paths, for fastcov)
+    set(FASTCOV_EXCLUDES "")
+    foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_FASTCOV_EXCLUDES})
+        list(APPEND FASTCOV_EXCLUDES "${EXCLUDE}")
+    endforeach()
+    list(REMOVE_DUPLICATES FASTCOV_EXCLUDES)
+
+    # Conditional arguments
+    if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
+        set(GENHTML_EXTRA_ARGS "--demangle-cpp")
+    endif()
+
+    # Set up commands which will be run to generate coverage data
+    set(FASTCOV_EXEC_TESTS_CMD ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS})
+
+    set(FASTCOV_CAPTURE_CMD ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
+        --search-directory ${BASEDIR}
+        --process-gcno
+        --output ${Coverage_NAME}.json
+        --exclude ${FASTCOV_EXCLUDES}
+        --exclude ${FASTCOV_EXCLUDES}
+    )
+    
+    set(FASTCOV_CONVERT_CMD ${FASTCOV_PATH}
+        -C ${Coverage_NAME}.json --lcov --output ${Coverage_NAME}.info
+    )
+
+    if(Coverage_SKIP_HTML)
+        set(FASTCOV_HTML_CMD ";")
+    else()
+        set(FASTCOV_HTML_CMD ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS}
+            -o ${Coverage_NAME} ${Coverage_NAME}.info
+        )
+    endif()
+
+    set(FASTCOV_POST_CMD ";")
+    if(Coverage_POST_CMD)
+        set(FASTCOV_POST_CMD ${Coverage_POST_CMD})
+    endif()
+
+    if(CODE_COVERAGE_VERBOSE)
+        message(STATUS "Code coverage commands for target ${Coverage_NAME} (fastcov):")
+
+        message("   Running tests:")
+        string(REPLACE ";" " " FASTCOV_EXEC_TESTS_CMD_SPACED "${FASTCOV_EXEC_TESTS_CMD}")
+        message("     ${FASTCOV_EXEC_TESTS_CMD_SPACED}")
+
+        message("   Capturing fastcov counters and generating report:")
+        string(REPLACE ";" " " FASTCOV_CAPTURE_CMD_SPACED "${FASTCOV_CAPTURE_CMD}")
+        message("     ${FASTCOV_CAPTURE_CMD_SPACED}")
+
+        message("   Converting fastcov .json to lcov .info:")
+        string(REPLACE ";" " " FASTCOV_CONVERT_CMD_SPACED "${FASTCOV_CONVERT_CMD}")
+        message("     ${FASTCOV_CONVERT_CMD_SPACED}")
+
+        if(NOT Coverage_SKIP_HTML)
+            message("   Generating HTML report: ")
+            string(REPLACE ";" " " FASTCOV_HTML_CMD_SPACED "${FASTCOV_HTML_CMD}")
+            message("     ${FASTCOV_HTML_CMD_SPACED}")
+        endif()
+        if(Coverage_POST_CMD)
+            message("   Running post command: ")
+            string(REPLACE ";" " " FASTCOV_POST_CMD_SPACED "${FASTCOV_POST_CMD}")
+            message("     ${FASTCOV_POST_CMD_SPACED}")
+        endif()
+    endif()
+
+    # Setup target
+    add_custom_target(${Coverage_NAME}
+
+        # Cleanup fastcov
+        COMMAND ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
+            --search-directory ${BASEDIR}
+            --zerocounters
+
+        COMMAND ${FASTCOV_EXEC_TESTS_CMD}
+        COMMAND ${FASTCOV_CAPTURE_CMD}
+        COMMAND ${FASTCOV_CONVERT_CMD}
+        COMMAND ${FASTCOV_HTML_CMD}
+        COMMAND ${FASTCOV_POST_CMD}
+
+        # Set output files as GENERATED (will be removed on 'make clean')
+        BYPRODUCTS
+             ${Coverage_NAME}.info
+             ${Coverage_NAME}.json
+             ${Coverage_NAME}/index.html  # report directory
+
+        WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
+        DEPENDS ${Coverage_DEPENDENCIES}
+        VERBATIM # Protect arguments to commands
+        COMMENT "Resetting code coverage counters to zero. Processing code coverage counters and generating report."
+    )
+
+    set(INFO_MSG "fastcov code coverage info report saved in ${Coverage_NAME}.info and ${Coverage_NAME}.json.")
+    if(NOT Coverage_SKIP_HTML)
+        string(APPEND INFO_MSG " Open ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html in your browser to view the coverage report.")
+    endif()
+    # Show where to find the fastcov info report
+    add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E echo ${INFO_MSG}
+    )
+
+endfunction() # setup_target_for_coverage_fastcov
+
+function(append_coverage_compiler_flags)
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
+    message(STATUS "Appending code coverage compiler flags: ${COVERAGE_COMPILER_FLAGS}")
+endfunction() # append_coverage_compiler_flags
+
+# Setup coverage for specific library
+function(append_coverage_compiler_flags_to_target name)
+    target_compile_options(${name}
+        PRIVATE ${COVERAGE_COMPILER_FLAGS})
+endfunction()
@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
@@ -0,0 +1,284 @@
+# - Returns a version string from Git
+#
+# These functions force a re-configure on each git commit so that you can
+# trust the values of the variables in your build system.
+#
+#  get_git_head_revision(<refspecvar> <hashvar> [ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR])
+#
+# Returns the refspec and sha hash of the current head revision
+#
+#  git_describe(<var> [<additional arguments to git describe> ...])
+#
+# Returns the results of git describe on the source tree, and adjusting
+# the output so that it tests false if an error occurs.
+#
+#  git_describe_working_tree(<var> [<additional arguments to git describe> ...])
+#
+# Returns the results of git describe on the working tree (--dirty option),
+# and adjusting the output so that it tests false if an error occurs.
+#
+#  git_get_exact_tag(<var> [<additional arguments to git describe> ...])
+#
+# Returns the results of git describe --exact-match on the source tree,
+# and adjusting the output so that it tests false if there was no exact
+# matching tag.
+#
+#  git_local_changes(<var>)
+#
+# Returns either "CLEAN" or "DIRTY" with respect to uncommitted changes.
+# Uses the return code of "git diff-index --quiet HEAD --".
+# Does not regard untracked files.
+#
+# Requires CMake 2.6 or newer (uses the 'function' command)
+#
+# Original Author:
+# 2009-2020 Ryan Pavlik <ryan.pavlik@gmail.com> <abiryan@ryand.net>
+# http://academic.cleardefinition.com
+#
+# Copyright 2009-2013, Iowa State University.
+# Copyright 2013-2020, Ryan Pavlik
+# Copyright 2013-2020, Contributors
+# SPDX-License-Identifier: BSL-1.0
+# Distributed under the Boost Software License, Version 1.0.
+# (See accompanying file LICENSE_1_0.txt or copy at
+# http://www.boost.org/LICENSE_1_0.txt)
+
+if(__get_git_revision_description)
+    return()
+endif()
+set(__get_git_revision_description YES)
+
+# We must run the following at "include" time, not at function call time,
+# to find the path to this module rather than the path to a calling list file
+get_filename_component(_gitdescmoddir ${CMAKE_CURRENT_LIST_FILE} PATH)
+
+# Function _git_find_closest_git_dir finds the next closest .git directory
+# that is part of any directory in the path defined by _start_dir.
+# The result is returned in the parent scope variable whose name is passed
+# as variable _git_dir_var. If no .git directory can be found, the
+# function returns an empty string via _git_dir_var.
+#
+# Example: Given a path C:/bla/foo/bar and assuming C:/bla/.git exists and
+# neither foo nor bar contain a file/directory .git. This wil return
+# C:/bla/.git
+#
+function(_git_find_closest_git_dir _start_dir _git_dir_var)
+    set(cur_dir "${_start_dir}")
+    set(git_dir "${_start_dir}/.git")
+    while(NOT EXISTS "${git_dir}")
+        # .git dir not found, search parent directories
+        set(git_previous_parent "${cur_dir}")
+        get_filename_component(cur_dir "${cur_dir}" DIRECTORY)
+        if(cur_dir STREQUAL git_previous_parent)
+            # We have reached the root directory, we are not in git
+            set(${_git_dir_var}
+                ""
+                PARENT_SCOPE)
+            return()
+        endif()
+        set(git_dir "${cur_dir}/.git")
+    endwhile()
+    set(${_git_dir_var}
+        "${git_dir}"
+        PARENT_SCOPE)
+endfunction()
+
+function(get_git_head_revision _refspecvar _hashvar)
+    _git_find_closest_git_dir("${CMAKE_CURRENT_SOURCE_DIR}" GIT_DIR)
+
+    if("${ARGN}" STREQUAL "ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR")
+        set(ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR TRUE)
+    else()
+        set(ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR FALSE)
+    endif()
+    if(NOT "${GIT_DIR}" STREQUAL "")
+        file(RELATIVE_PATH _relative_to_source_dir "${CMAKE_SOURCE_DIR}"
+             "${GIT_DIR}")
+        if("${_relative_to_source_dir}" MATCHES "[.][.]" AND NOT ALLOW_LOOKING_ABOVE_CMAKE_SOURCE_DIR)
+            # We've gone above the CMake root dir.
+            set(GIT_DIR "")
+        endif()
+    endif()
+    if("${GIT_DIR}" STREQUAL "")
+        set(${_refspecvar}
+            "GITDIR-NOTFOUND"
+            PARENT_SCOPE)
+        set(${_hashvar}
+            "GITDIR-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    # Check if the current source dir is a git submodule or a worktree.
+    # In both cases .git is a file instead of a directory.
+    #
+    if(NOT IS_DIRECTORY ${GIT_DIR})
+        # The following git command will return a non empty string that
+        # points to the super project working tree if the current
+        # source dir is inside a git submodule.
+        # Otherwise the command will return an empty string.
+        #
+        execute_process(
+            COMMAND "${GIT_EXECUTABLE}" rev-parse
+                    --show-superproject-working-tree
+            WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+            OUTPUT_VARIABLE out
+            ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+        if(NOT "${out}" STREQUAL "")
+            # If out is empty, GIT_DIR/CMAKE_CURRENT_SOURCE_DIR is in a submodule
+            file(READ ${GIT_DIR} submodule)
+            string(REGEX REPLACE "gitdir: (.*)$" "\\1" GIT_DIR_RELATIVE
+                                 ${submodule})
+            string(STRIP ${GIT_DIR_RELATIVE} GIT_DIR_RELATIVE)
+            get_filename_component(SUBMODULE_DIR ${GIT_DIR} PATH)
+            get_filename_component(GIT_DIR ${SUBMODULE_DIR}/${GIT_DIR_RELATIVE}
+                                   ABSOLUTE)
+            set(HEAD_SOURCE_FILE "${GIT_DIR}/HEAD")
+        else()
+            # GIT_DIR/CMAKE_CURRENT_SOURCE_DIR is in a worktree
+            file(READ ${GIT_DIR} worktree_ref)
+            # The .git directory contains a path to the worktree information directory
+            # inside the parent git repo of the worktree.
+            #
+            string(REGEX REPLACE "gitdir: (.*)$" "\\1" git_worktree_dir
+                                 ${worktree_ref})
+            string(STRIP ${git_worktree_dir} git_worktree_dir)
+            _git_find_closest_git_dir("${git_worktree_dir}" GIT_DIR)
+            set(HEAD_SOURCE_FILE "${git_worktree_dir}/HEAD")
+        endif()
+    else()
+        set(HEAD_SOURCE_FILE "${GIT_DIR}/HEAD")
+    endif()
+    set(GIT_DATA "${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles/git-data")
+    if(NOT EXISTS "${GIT_DATA}")
+        file(MAKE_DIRECTORY "${GIT_DATA}")
+    endif()
+
+    if(NOT EXISTS "${HEAD_SOURCE_FILE}")
+        return()
+    endif()
+    set(HEAD_FILE "${GIT_DATA}/HEAD")
+    configure_file("${HEAD_SOURCE_FILE}" "${HEAD_FILE}" COPYONLY)
+
+    configure_file("${_gitdescmoddir}/GetGitRevisionDescription.cmake.in"
+                   "${GIT_DATA}/grabRef.cmake" @ONLY)
+    include("${GIT_DATA}/grabRef.cmake")
+
+    set(${_refspecvar}
+        "${HEAD_REF}"
+        PARENT_SCOPE)
+    set(${_hashvar}
+        "${HEAD_HASH}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_describe _var)
+    if(NOT GIT_FOUND)
+        find_package(Git QUIET)
+    endif()
+    get_git_head_revision(refspec hash)
+    if(NOT GIT_FOUND)
+        set(${_var}
+            "GIT-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+    if(NOT hash)
+        set(${_var}
+            "HEAD-HASH-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    # TODO sanitize
+    #if((${ARGN}" MATCHES "&&") OR
+    #   (ARGN MATCHES "||") OR
+    #   (ARGN MATCHES "\\;"))
+    #   message("Please report the following error to the project!")
+    #   message(FATAL_ERROR "Looks like someone's doing something nefarious with git_describe! Passed arguments ${ARGN}")
+    #endif()
+
+    #message(STATUS "Arguments to execute_process: ${ARGN}")
+
+    execute_process(
+        COMMAND "${GIT_EXECUTABLE}" describe --tags --always ${hash} ${ARGN}
+        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        RESULT_VARIABLE res
+        OUTPUT_VARIABLE out
+        ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(NOT res EQUAL 0)
+        set(out "${out}-${res}-NOTFOUND")
+    endif()
+
+    set(${_var}
+        "${out}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_describe_working_tree _var)
+    if(NOT GIT_FOUND)
+        find_package(Git QUIET)
+    endif()
+    if(NOT GIT_FOUND)
+        set(${_var}
+            "GIT-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    execute_process(
+        COMMAND "${GIT_EXECUTABLE}" describe --dirty ${ARGN}
+        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        RESULT_VARIABLE res
+        OUTPUT_VARIABLE out
+        ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(NOT res EQUAL 0)
+        set(out "${out}-${res}-NOTFOUND")
+    endif()
+
+    set(${_var}
+        "${out}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_get_exact_tag _var)
+    git_describe(out --exact-match ${ARGN})
+    set(${_var}
+        "${out}"
+        PARENT_SCOPE)
+endfunction()
+
+function(git_local_changes _var)
+    if(NOT GIT_FOUND)
+        find_package(Git QUIET)
+    endif()
+    get_git_head_revision(refspec hash)
+    if(NOT GIT_FOUND)
+        set(${_var}
+            "GIT-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+    if(NOT hash)
+        set(${_var}
+            "HEAD-HASH-NOTFOUND"
+            PARENT_SCOPE)
+        return()
+    endif()
+
+    execute_process(
+        COMMAND "${GIT_EXECUTABLE}" diff-index --quiet HEAD --
+        WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}"
+        RESULT_VARIABLE res
+        OUTPUT_VARIABLE out
+        ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE)
+    if(res EQUAL 0)
+        set(${_var}
+            "CLEAN"
+            PARENT_SCOPE)
+    else()
+        set(${_var}
+            "DIRTY"
+            PARENT_SCOPE)
+    endif()
+endfunction()
@@ -0,0 +1,43 @@
+#
+# Internal file for GetGitRevisionDescription.cmake
+#
+# Requires CMake 2.6 or newer (uses the 'function' command)
+#
+# Original Author:
+# 2009-2010 Ryan Pavlik <rpavlik@iastate.edu> <abiryan@ryand.net>
+# http://academic.cleardefinition.com
+# Iowa State University HCI Graduate Program/VRAC
+#
+# Copyright 2009-2012, Iowa State University
+# Copyright 2011-2015, Contributors
+# Distributed under the Boost Software License, Version 1.0.
+# (See accompanying file LICENSE_1_0.txt or copy at
+# http://www.boost.org/LICENSE_1_0.txt)
+# SPDX-License-Identifier: BSL-1.0
+
+set(HEAD_HASH)
+
+file(READ "@HEAD_FILE@" HEAD_CONTENTS LIMIT 1024)
+
+string(STRIP "${HEAD_CONTENTS}" HEAD_CONTENTS)
+if(HEAD_CONTENTS MATCHES "ref")
+    # named branch
+    string(REPLACE "ref: " "" HEAD_REF "${HEAD_CONTENTS}")
+    if(EXISTS "@GIT_DIR@/${HEAD_REF}")
+        configure_file("@GIT_DIR@/${HEAD_REF}" "@GIT_DATA@/head-ref" COPYONLY)
+    else()
+        configure_file("@GIT_DIR@/packed-refs" "@GIT_DATA@/packed-refs" COPYONLY)
+        file(READ "@GIT_DATA@/packed-refs" PACKED_REFS)
+        if(${PACKED_REFS} MATCHES "([0-9a-z]*) ${HEAD_REF}")
+            set(HEAD_HASH "${CMAKE_MATCH_1}")
+        endif()
+    endif()
+else()
+    # detached HEAD
+    configure_file("@GIT_DIR@/HEAD" "@GIT_DATA@/head-ref" COPYONLY)
+endif()
+
+if(NOT HEAD_HASH)
+    file(READ "@GIT_DATA@/head-ref" HEAD_HASH LIMIT 1024)
+    string(STRIP "${HEAD_HASH}" HEAD_HASH)
+endif()
@@ -0,0 +1,26 @@
+Copyright (c) <year> <owner>. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors
+may be used to endorse or promote products derived from this software without
+specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute, execute,
+and transmit the Software, and to prepare derivative works of the Software,
+and to permit third-parties to whom the Software is furnished to do so, all
+subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer, must
+be included in all copies of the Software, in whole or in part, and all derivative
+works of the Software, unless such copies or derivative works are solely in
+the form of machine-executable object code generated by a source language
+processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES
+OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
@@ -1,40 +0,0 @@
-Configuring the FSFW
-======
-
-The FSFW can be configured via the `fsfwconfig` folder. A template folder has
-been provided to have a starting point for this. The folder should be added
-to the include path. The primary configuration file is the `FSFWConfig.h` folder. Some
-of the available options will be explained in more detail here.
-
-# Auto-Translation of Events
-
-The FSFW allows the automatic translation of events, which allows developers to track triggered
-events directly via console output. Using this feature requires:
-
-1. `FSFW_OBJ_EVENT_TRANSLATION` set to 1 in the configuration file.
-2. Special auto-generated translation files which translate event IDs and object IDs into
-   human readable strings. These files can be generated using the 
-   [modgen Python scripts](https://git.ksat-stuttgart.de/source/modgen.git).
-3. The generated translation files for the object IDs should be named `translatesObjects.cpp`
-   and `translateObjects.h` and should be copied to the `fsfwconfig/objects` folder
-4. The generated translation files for the event IDs should be named `translateEvents.cpp` and
-   `translateEvents.h` and should be copied to the `fsfwconfig/events` folder
-   
-An example implementations of these translation file generators can be found as part
-of the [SOURCE project here](https://git.ksat-stuttgart.de/source/sourceobsw/-/tree/development/generators)
-or the [FSFW example](https://egit.irs.uni-stuttgart.de/fsfw/fsfw_example_public/src/branch/master/generators)
-
-## Configuring the Event Manager
-
-The number of allowed subscriptions can be modified with the following
-parameters:
-
-``` c++
-namespace fsfwconfig {
-//! Configure the allocated pool sizes for the event manager.
-static constexpr size_t FSFW_EVENTMGMR_MATCHTREE_NODES = 240;
-static constexpr size_t FSFW_EVENTMGMT_EVENTIDMATCHERS = 120;
-static constexpr size_t FSFW_EVENTMGMR_RANGEMATCHERS   = 120;
-}
-```
-
@@ -1 +0,0 @@
-## Controllers
@@ -1,55 +0,0 @@
-## FSFW Core Modules
-
-These core modules provide the most important functionalities of the 
-Flight Software Framework
-
-### Clock
-
- * This is a class of static functions that can be used at anytime
- * Leap Seconds must be set if any time conversions from UTC to other times is used
-
-### ObjectManager
-
-* Must be created during program startup
-* The component which handles all references. All SystemObjects register at this component. 
-* Any SystemObject needs to have a unique ObjectId. Those can be managed like objects::framework_objects.
-* A reference to an object can be get by calling the following function. T must be the specific Interface you want to call.
-A nullptr check of the returning Pointer must be done. This function is based on Run-time type information. 
-
-```cpp
-template <typename T> T* ObjectManagerIF::get( object_id_t id )
-```
-* A typical way to create all objects on startup is a handing a static produce function to the
-  ObjectManager on creation. By calling objectManager->initialize() the produce function will be
-  called and all SystemObjects will be initialized afterwards.
-
-### Event Manager
-
-* Component which allows routing of events
-* Other objects can subscribe to specific events, ranges of events or all events of an object.
-* Subscriptions can be done during runtime but should be done during initialization
-* Amounts of allowed subscriptions can be configured in `FSFWConfig.h`
-
-### Health Table
-
-* A component which holds every health state 
-* Provides a thread safe way to access all health states without the need of message exchanges
-
-### Stores
-
-* The message based communication can only exchange a few bytes of information inside the message
-  itself. Therefore, additional information can  be exchanged with Stores. With this, only the
-  store address must be exchanged in the message.
-* Internally, the FSFW uses an IPC Store to exchange data between processes. For incoming TCs a TC
-  Store is used. For outgoing TM a TM store is used.
-* All of them should use the Thread Safe Class storagemanager/PoolManager
-
-### Tasks
-
-There are two different types of tasks:
- * The PeriodicTask just executes objects that are of type ExecutableObjectIF in the order of the
-   insertion to the Tasks.
- * FixedTimeslotTask executes a list of calls in the order of the given list. This is intended for
-   DeviceHandlers, where polling should be in a defined order. An example can be found in 
-   `defaultcfg/fsfwconfig/pollingSequence` folder
-
@@ -1 +0,0 @@
-## Device Handlers
@@ -1,135 +0,0 @@
-High-level overview
-======
-
-# Structure
-
-The general structure is driven by the usage of interfaces provided by objects. 
-The FSFW uses C++11 as baseline. The intention behind this is that this C++ Standard should be
-widely available, even with older compilers.
-The FSFW uses dynamic allocation during the initialization but provides static containers during runtime. 
-This simplifies the instantiation of objects and allows the usage of some standard containers. 
-Dynamic Allocation after initialization is discouraged and different solutions are provided in the
-FSFW to achieve that. The fsfw uses run-time type information but exceptions are not allowed.
-
-# Failure Handling
-
-Functions should return a defined `ReturnValue_t` to signal to the caller that something has
-gone wrong. Returnvalues must be unique. For this the function `HasReturnvaluesIF::makeReturnCode`
-or the macro `MAKE_RETURN` can be used. The `CLASS_ID` is a unique id for that type of object.
-See `returnvalues/FwClassIds` folder. The user can add custom `CLASS_ID`s via the
-`fsfwconfig` folder.
-
-# OSAL
-
-The FSFW provides operation system abstraction layers for Linux, FreeRTOS and RTEMS. 
-The OSAL provides periodic tasks, message queues, clocks and semaphores as well as mutexes.
-The [OSAL README](doc/README-osal.md#top) provides more detailed information on provided components
-and how to use them.
-
-# Core Components 
-
-The FSFW has following core components. More detailed informations can be found in the
-[core component section](doc/README-core.md#top):
-
-1. Tasks: Abstraction for different (periodic) task types like periodic tasks or tasks 
-   with fixed timeslots
-2. ObjectManager: This module stores all `SystemObjects` by mapping a provided unique object ID
-   to the object handles.
-3. Static Stores: Different stores are provided to store data of variable size (like telecommands 
-   or small telemetry) in a pool structure without using dynamic memory allocation.
-   These pools are allocated up front.
-3. Clock: This module provided common time related functions
-4. EventManager: This module allows routing of events generated by `SystemObjects`
-5. HealthTable: A component which stores the health states of objects
-
-# Static IDs in the framework
-
-Some parts of the framework use a static routing address for communication. 
-An example setup of ids can be found in the example config in `defaultcft/fsfwconfig/objects`
- inside the function `Factory::setStaticFrameworkObjectIds()`.
-
-# Events
-
-Events are tied to objects. EventIds can be generated by calling the Macro MAKE_EVENT. 
-This works analog to the returnvalues. Every object that needs own EventIds has to get a
-unique SUBSYSTEM_ID. Every SystemObject can call triggerEvent from the parent class.
-Therefore, event messages contain the specific EventId and the objectId of the object that
-has triggered.
-
-# Internal Communication
-
-Components communicate mostly via Messages through Queues. 
-Those queues are created by calling the singleton `QueueFactory::instance()->create()` which
-will create `MessageQueue` instances for the used OSAL.
-
-# External Communication
-
-The external communication with the mission control system is mostly up to the user implementation.
-The FSFW provides PUS Services which can be used to but don't need to be used. 
-The services can be seen as a conversion from a TC to a message based communication and back.
-
-## TMTC Communication
-
-The FSFW provides some components to facilitate TMTC handling via the PUS commands.
-For example, a UDP or TCP PUS server socket can be opened on a specific port using the
-files located in `osal/common`. The FSFW example uses this functionality to allow sending telecommands
-and receiving telemetry using the [TMTC commander application](https://github.com/spacefisch/tmtccmd).
-Simple commands like the PUS Service 17 ping service can be tested by simply running the
-`tmtc_client_cli.py` or `tmtc_client_gui.py` utility in 
-the [example tmtc folder](https://egit.irs.uni-stuttgart.de/fsfw/fsfw_example_public/src/branch/master/tmtc)
-while the `fsfw_example` application is running.
-
-More generally, any class responsible for handling incoming telecommands and sending telemetry
-can implement the generic `TmTcBridge` class located in `tmtcservices`. Many applications
-also use a dedicated polling task for reading telecommands which passes telecommands
-to the `TmTcBridge` implementation.
-
-## CCSDS Frames, CCSDS Space Packets and PUS
-
-If the communication is based on CCSDS Frames and Space Packets, several classes can be used to
-distributed the packets to the corresponding services. Those can be found in `tcdistribution`. 
-If Space Packets are used, a timestamper has to be provided by the user. 
-An example can be found in the `timemanager` folder, which uses `CCSDSTime::CDS_short`.
-
-# Device Handlers
-
-DeviceHandlers are another important component of the FSFW. 
-The idea is, to have a software counterpart of every physical device to provide a simple mode,
-health and commanding interface. By separating the underlying Communication Interface with 
-`DeviceCommunicationIF`, a device handler (DH) can be tested on different hardware.
-The DH has mechanisms to monitor the communication with the physical device which allow
-for FDIR reaction.  Device Handlers can be created by implementing `DeviceHandlerBase`. 
-A standard FDIR component for the DH will be created automatically but can
-be overwritten by the user. More information on DeviceHandlers can be found in the
-related [documentation section](doc/README-devicehandlers.md#top).
-
-# Modes and Health
-
-The two interfaces `HasModesIF` and `HasHealthIF` provide access for commanding and monitoring
-of components. On-board Mode Management is implement in hierarchy system. 
-DeviceHandlers and Controllers are the lowest part of the hierarchy. 
-The next layer are Assemblies. Those assemblies act as a component which handle
-redundancies of handlers. Assemblies share a common core with the next level which
-are the Subsystems. 
-
-Those Assemblies are intended to act as auto-generated components from a database which describes
-the subsystem modes. The definitions contain transition and target tables which contain the DH,
-Assembly and Controller Modes to be commanded.
-Transition tables contain as many steps as needed to reach the mode from any other mode, e.g. a
-switch into any higher AOCS mode might first turn on the sensors, than the actuators and the
-controller as last component. 
-The target table is used to describe the state that is checked continuously by the subsystem. 
-All of this allows System Modes to be generated as Subsystem object as well from the same database. 
-This System contains list of subsystem modes in the transition and target tables. 
-Therefore, it allows a modular system to create system modes and easy commanding of those, because
-only the highest components must be commanded.
-
-The health state represents if the component is able to perform its tasks. 
-This can be used to signal the system to avoid using this component instead of a redundant one.
-The on-board FDIR uses the health state for isolation and recovery. 
-
-# Unit Tests
-
-Unit Tests are provided in the unittest folder. Those use the catch2 framework but do not include
-catch2 itself. More information on how to run these tests can be found in the separate
-[`fsfw_tests` reposoitory](https://egit.irs.uni-stuttgart.de/fsfw/fsfw_tests)
@@ -1,174 +0,0 @@
-## Local Data Pools Developer Information
-
-The following text is targeted towards mission software developers which would like
-to use the local data pools provided by the FSFW to store data like sensor values so they can be 
-used by other software objects like controllers as well. If a custom class should have a local 
-pool which  can be used by other software objects as well, following steps have to be performed:
-
-1. Create a `LocalDataPoolManager` member object in the custom class
-2. Implement the `HasLocalDataPoolIF` with specifies the interface between the local pool manager
-and the class owning the local pool.
-
-The local data pool manager is also able to process housekeeping service requests in form
-of messages, generate periodic housekeeping packet, generate notification and snapshots of changed
-variables and datasets and process notifications and snapshots coming from other objects.
-The two former tasks are related to the external interface using telemetry and telecommands (TMTC)
-while the later two are related to data consumers like controllers only acting on data change 
-detected by the data creator instead of checking the data manually each cycle. Two important 
-framework classes `DeviceHandlerBase` and `ExtendedControllerBase` already perform the two steps 
-shown above so the steps required are altered slightly.
-
-### Storing and Accessing pool data 
-
-The pool manager is responsible for thread-safe access of the pool data, but the actual
-access to the pool data from the point of view of a mission software developer happens via proxy
-classes like pool variable classes. These classes store a copy
-of the pool variable with the matching datatype and copy the actual data from the local pool
-on a `read` call. Changed variables can then be written to the local pool with a `commit` call.
-The `read` and `commit` calls are thread-safe and can be called concurrently from data creators
-and data consumers. Generally, a user will create a dataset class which in turn groups all 
-cohesive pool variables. These sets simply iterator over the list of variables and call the 
-`read` and `commit` functions of each variable. The following diagram shows the
-high-level architecture of the local data pools.
-
-.. image:: ../misc/logo/FSFW_Logo_V3_bw.png
-   :alt: FSFW Logo
-
-
-An example is shown for using the local data pools with a Gyroscope.
-For example, the following code shows an implementation to access data from a Gyroscope taken
-from the SOURCE CubeSat project:
-
-```cpp
-class GyroPrimaryDataset: public StaticLocalDataSet<3 * sizeof(float)> {
-public:
-    /**
-     * Constructor for data users
-     * @param gyroId
-     */
-    GyroPrimaryDataset(object_id_t gyroId):
-            StaticLocalDataSet(sid_t(gyroId, gyrodefs::GYRO_DATA_SET_ID)) {
-        setAllVariablesReadOnly();
-    }
-
-    lp_var_t<float> angVelocityX = lp_var_t<float>(sid.objectId,
-            gyrodefs::ANGULAR_VELOCITY_X, this);
-    lp_var_t<float> angVelocityY = lp_var_t<float>(sid.objectId,
-            gyrodefs::ANGULAR_VELOCITY_Y, this);
-    lp_var_t<float> angVelocityZ = lp_var_t<float>(sid.objectId,
-            gyrodefs::ANGULAR_VELOCITY_Z, this);
-private:
-
-    friend class GyroHandler;
-    /**
-     * Constructor for data creator
-     * @param hkOwner
-     */
-    GyroPrimaryDataset(HasLocalDataPoolIF* hkOwner):
-            StaticLocalDataSet(hkOwner, gyrodefs::GYRO_DATA_SET_ID) {}
-};
-```
-
-There is a public constructor for users which sets all variables to read-only and there is a
-constructor for the GyroHandler data creator by marking it private and declaring the `GyroHandler`
-as a friend class. Both the atittude controller and the `GyroHandler` can now
-use the same class definition to access the pool variables with `read` and `commit` semantics
-in a thread-safe way. Generally, each class requiring access will have the set class as a member
-class. The data creator will also be generally a `DeviceHandlerBase` subclass and some additional
-steps are necessary to expose the set for housekeeping purposes.
-
-### Using the local data pools in a `DeviceHandlerBase` subclass
-
-It is very common to store data generated by devices like a sensor into a pool which can 
-then be used by other objects. Therefore, the `DeviceHandlerBase` already has a
-local pool. Using the aforementioned example, our `GyroHandler` will now have the set class
-as a member:
-
-```cpp
-class GyroHandler: ... {
-
-public:
-	...
-private:
-	...
-	GyroPrimaryDataset gyroData;
-	...
-};
-```
-
-The constructor used for the creators expects the owner class as a parameter, so we initialize
-the object in the `GyroHandler` constructor like this:
-
-```cpp
-GyroHandler::GyroHandler(object_id_t objectId, object_id_t comIF,
-        CookieIF *comCookie, uint8_t switchId):
-        DeviceHandlerBase(objectId, comIF, comCookie), switchId(switchId),
-		gyroData(this) {}
-```
-
-We need to assign the set to a reply ID used in the `DeviceHandlerBase`. 
-The combination of the `GyroHandler` object ID and the reply ID will be the 64-bit structure ID
-`sid_t` and is used to globally identify the set, for example when requesting housekeeping data or
-generating update messages. We need to assign our custom set class in some way so that the local 
-pool manager can access the custom data sets as well.
-By default, the `getDataSetHandle` will take care of this tasks. The default implementation for a
-`DeviceHandlerBase` subclass will use the internal command map to retrieve 
-a handle to a dataset from a given reply ID. Therefore,
-we assign the set in the `fillCommandAndReplyMap` function:
-
-```cpp
-void GyroHandler::fillCommandAndReplyMap() {
-	...
-	this->insertInCommandAndReplyMap(gyrodefs::GYRO_DATA, 3, &gyroData);
-	...
-}
-```
-
-Now, we need to create the actual pool entries as well, using the `initializeLocalDataPool` 
-function. Here, we also immediately subscribe for periodic housekeeping packets 
-with an interval of 4 seconds. They are still disabled in this example and can be enabled 
-with a housekeeping service command.
-
-```cpp
-ReturnValue_t GyroHandler::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
-		LocalDataPoolManager &poolManager) {
-	localDataPoolMap.emplace(gyrodefs::ANGULAR_VELOCITY_X,
-			new PoolEntry<float>({0.0}));
-	localDataPoolMap.emplace(gyrodefs::ANGULAR_VELOCITY_Y,
-			new PoolEntry<float>({0.0}));
-	localDataPoolMap.emplace(gyrodefs::ANGULAR_VELOCITY_Z,
-			new PoolEntry<float>({0.0}));
-	localDataPoolMap.emplace(gyrodefs::GENERAL_CONFIG_REG42,
-			new PoolEntry<uint8_t>({0}));
-	localDataPoolMap.emplace(gyrodefs::RANGE_CONFIG_REG43,
-			new PoolEntry<uint8_t>({0}));
-
-	poolManager.subscribeForPeriodicPacket(gyroData.getSid(), false, 4.0, false);
-	return HasReturnvaluesIF::RETURN_OK;
-}
-```
-
-Now, if we receive some sensor data and converted them into the right format, 
-we can write it into the pool like this, using a guard class to ensure the set is commited back 
-in any case:
-
-```cpp
-PoolReadGuard readHelper(&gyroData);
-if(readHelper.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
-	if(not gyroData.isValid()) {
-		gyroData.setValidity(true, true);
-	}
-
-	gyroData.angVelocityX = angularVelocityX;
-	gyroData.angVelocityY = angularVelocityY;
-	gyroData.angVelocityZ = angularVelocityZ;
-}
-```
-
-The guard class will commit the changed data on destruction automatically.
-
-### Using the local data pools in a `ExtendedControllerBase` subclass
-
-Coming soon
-
-
@@ -1,32 +0,0 @@
-# Operating System Abstraction Layer (OSAL)
-
-Some specific information on the provided OSALs are provided.
-
-## Linux OSAL
-
-This OSAL can be used to compile for Linux host systems like Ubuntu 20.04 or for 
-embedded Linux targets like the Raspberry Pi. This OSAL generally requires threading support
-and real-time functionalities. For most UNIX systems, this is done by adding `-lrt` and `-lpthread` to the linked libraries in the compilation process. The CMake build support provided will do this automatically for the `fsfw` target. It should be noted that most UNIX systems need to be configured specifically to allow the real-time functionalities required by the FSFW.
-
-More information on how to set up a Linux system accordingly can be found in the 
-[Linux README of the FSFW example application](https://egit.irs.uni-stuttgart.de/fsfw/fsfw_example/src/branch/master/doc/README-linux.md#top)
-
-## Hosted OSAL
-
-This is the newest OSAL. Support for Semaphores has not been implemented yet and will propably be implemented as soon as C++20 with Semaphore support has matured. This OSAL can be used to run the FSFW on any host system, but currently has only been tested on Windows 10 and Ubuntu 20.04. Unlike the other OSALs, it uses dynamic memory allocation (e.g. for the message queue implementation). Cross-platform serial port (USB) support might be added soon.
-
-## FreeRTOS OSAL
-
-FreeRTOS is not included and the developer needs to take care of compiling the FreeRTOS sources and adding the `FreeRTOSConfig.h` file location to the include path. This OSAL has only been tested extensively with the pre-emptive scheduler configuration so far but it should in principle also be possible to use a cooperative scheduler. It is recommended to use the `heap_4` allocation scheme. When using newlib (nano), it is also recommended to add `#define configUSE_NEWLIB_REENTRANT` to the FreeRTOS configuration file to ensure thread-safety.
-
-When using this OSAL, developers also need to provide an implementation for the `vRequestContextSwitchFromISR` function. This has been done because the call to request a context switch from an ISR is generally located in the `portmacro.h` header and is different depending on the target architecture or device.
-
-## RTEMS OSAL
-
-The RTEMS OSAL was the first implemented OSAL which is also used on the active satellite Flying Laptop.
-
-## TCP/IP socket abstraction
-
-The Linux and Host OSAL provide abstraction layers for the socket API. Currently, only UDP sockets have been imlemented. This is very useful to test TMTC handling either on the host computer directly (targeting localhost with a TMTC application) or on embedded Linux devices, sending TMTC packets via Ethernet.
-
-
@@ -1 +0,0 @@
-## PUS Services
@@ -4,6 +4,7 @@ API
 .. toctree::
   :maxdepth: 4

+   api/cfdp
   api/objectmanager
   api/task
   api/ipc
@@ -0,0 +1,8 @@
+CFDP API
+=================
+
+``UserBase``
+-----------------
+
+.. doxygenclass:: cfdp::UserBase
+	:members:
@@ -3,7 +3,7 @@
 Returnvalue API
 ==================

-.. doxygenfile:: HasReturnvaluesIF.h
+.. doxygenfile:: returnvalue.h

 .. _fwclassids:

@@ -17,12 +17,13 @@

 # -- Project information -----------------------------------------------------

-project = 'Flight Software Framework'
-copyright = '2021, Institute of Space Systems (IRS)'
-author = 'Institute of Space Systems (IRS)'
+project = "Flight Software Framework"
+copyright = "2021, Institute of Space Systems (IRS)"
+author = "Institute of Space Systems (IRS)"

+# TODO: Should try to read this from CMakeLists.txt automatically..
 # The full version, including alpha/beta/rc tags
-release = '2.0.1'
+release = "5.0.0"


 # -- General configuration ---------------------------------------------------
@@ -30,17 +31,17 @@ release = '2.0.1'
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
-extensions = [ "breathe" ]
+extensions = ["breathe"]

 breathe_default_project = "fsfw"

 # Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
+templates_path = ["_templates"]

 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
 # This pattern also affects html_static_path and html_extra_path.
-exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
+exclude_patterns = ["_build", "Thumbs.db", ".DS_Store"]


 # -- Options for HTML output -------------------------------------------------
@@ -48,9 +49,14 @@ exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 #
-html_theme = 'alabaster'
+html_theme = "sphinx_rtd_theme"
+
+html_theme_options = {
+    "extra_nav_links": {"Impressum" : "https://www.uni-stuttgart.de/impressum", "Datenschutz": "https://info.irs.uni-stuttgart.de/datenschutz/datenschutzWebmit.html"}
+}
+

 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = []
+html_static_path = []
@@ -1,3 +1,110 @@
+.. _dhb-prim-doc:
+
 Device Handlers
 ==================

+Device handler components represent, control and monitor equipment, for example sensors or actuators
+of a spacecraft or the payload.
+
+Most device handlers have the same common functionality or
+requirements, which are fulfilled by implementing certain interfaces:
+
+- The handler/device needs to be commandable: :cpp:class:`HasActionsIF`
+- The handler needs to communicate with the physical device via a dedicated
+  communication bus, for example SpaceWire, UART or SPI: :cpp:class:`DeviceCommunicationIF`
+- The handler has housekeeping data which has to be exposed to the operator and/or other software
+  components: :cpp:class:`HasLocalDataPoolIF`
+- The handler has configurable parameters: :cpp:class:`ReceivesParameterMessagesIF` which
+  also implements :cpp:class:`HasParametersIF`
+- The handler has health states, for example to indicate a broken device:
+  :cpp:class:`HasHealthIF`
+- The handler has modes. For example there are the core modes `MODE_ON`, `MODE_OFF`
+  and `MODE_NORMAL` provided by the FSFW. `MODE_ON` means that a device is physically powered
+  but that it is not periodically polling data from the
+  physical device, `MODE_NORMAL` means that it is able to do that: :cpp:class:`HasModesIF`
+
+The device handler base therefore provides abstractions for a lot of common
+functionality, which can potentially avoid high amounts or logic and code duplication.
+
+Template Device Handler Base File
+----------------------------------
+
+This is an example template device handler header file with all necessary
+functions implemented:
+
+.. code-block:: cpp
+
+	#ifndef __TESTDEVICEHANDLER_H_
+	#define __TESTDEVICEHANDLER_H_
+
+	#include <fsfw/devicehandlers/DeviceHandlerBase.h>
+
+	class TestDeviceHandler: DeviceHandlerBase {
+	public:
+	  TestDeviceHandler(object_id_t objectId, object_id_t comIF, CookieIF* cookie);
+	private:
+	  void doStartUp() override;
+	  void doShutDown() override;
+	  ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t* id) override;
+	  ReturnValue_t buildTransitionDeviceCommand(DeviceCommandId_t* id) override;
+	  void fillCommandAndReplyMap() override;
+	  ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand, const uint8_t* commandData,
+	                                        size_t commandDataLen) override;
+	  ReturnValue_t scanForReply(const uint8_t* start, size_t remainingSize, DeviceCommandId_t* foundId,
+	                             size_t* foundLen) override;
+	  ReturnValue_t interpretDeviceReply(DeviceCommandId_t id, const uint8_t* packet) override;
+	  uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override;
+	  ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
+	                                        LocalDataPoolManager& poolManager) override;
+
+	};
+
+	#endif /* __TESTDEVICEHANDLER_H_ */
+
+and the respective source file with sensible default return values:
+
+.. code-block:: cpp
+
+	#include "TestDeviceHandler.h"
+
+	TestDeviceHandler::TestDeviceHandler(object_id_t objectId, object_id_t comIF, CookieIF* cookie)
+	    : DeviceHandlerBase(objectId, comIF, cookie) {}
+
+	void TestDeviceHandler::doStartUp() {}
+
+	void TestDeviceHandler::doShutDown() {}
+
+	ReturnValue_t TestDeviceHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
+	  return returnvalue::OK;
+	}
+
+	ReturnValue_t TestDeviceHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
+	  return returnvalue::OK;
+	}
+
+	void TestDeviceHandler::fillCommandAndReplyMap() {}
+
+	ReturnValue_t TestDeviceHandler::buildCommandFromCommand(DeviceCommandId_t deviceCommand,
+	                                                         const uint8_t* commandData,
+	                                                         size_t commandDataLen) {
+	  return returnvalue::OK;
+	}
+
+	ReturnValue_t TestDeviceHandler::scanForReply(const uint8_t* start, size_t remainingSize,
+	                                              DeviceCommandId_t* foundId, size_t* foundLen) {
+	  return returnvalue::OK;
+	}
+
+	ReturnValue_t TestDeviceHandler::interpretDeviceReply(DeviceCommandId_t id,
+	                                                      const uint8_t* packet) {
+	  return returnvalue::OK;
+	}
+
+	uint32_t TestDeviceHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) {
+	  return 10000;
+	}
+
+	ReturnValue_t TestDeviceHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
+	                                                         LocalDataPoolManager& poolManager) {
+	  return returnvalue::OK;
+	}
@@ -19,6 +19,29 @@ A template configuration folder was provided and can be copied into the project
 a starting point. The [configuration section](docs/README-config.md#top) provides more specific 
 information about the possible options.

+Prerequisites
+-------------------
+
+The Embedded Template Library (etl) is a dependency of the FSFW which is automatically
+installed and provided by the build system unless the correction version was installed.
+The current recommended version can be found inside the fsfw ``CMakeLists.txt`` file or by using
+``ccmake`` and looking up the ``FSFW_ETL_LIB_MAJOR_VERSION`` variable.
+
+You can install the ETL library like this. On Linux, it might be necessary to add ``sudo`` before
+the install call:
+
+.. code-block:: console
+
+   git clone https://github.com/ETLCPP/etl
+   cd etl
+   git checkout <currentRecommendedVersion>
+   mkdir build && cd build
+   cmake ..
+   cmake --install .
+
+It is recommended to install ``20.27.2`` or newer for the package version handling of
+ETL to work.
+
 Adding the library
 -------------------

@@ -60,6 +83,20 @@ The FSFW also has unittests which use the `Catch2 library`_.
 These are built by setting the CMake option ``FSFW_BUILD_UNITTESTS`` to ``ON`` or `TRUE`
 from your project `CMakeLists.txt` file or from the command line.

+You can install the Catch2 library, which prevents the build system to avoid re-downloading
+the dependency if the unit tests are completely rebuilt. The current recommended version
+can be found inside the fsfw ``CMakeLists.txt`` file or by using ``ccmake`` and looking up
+the ``FSFW_CATCH2_LIB_VERSION`` variable.
+
+.. code-block:: console
+
+   git clone https://github.com/catchorg/Catch2.git
+   cd Catch2
+   git checkout <currentRecommendedVersion>
+   cmake -Bbuild -H. -DBUILD_TESTING=OFF
+   sudo cmake --build build/ --target install
+
+
 The fsfw-tests binary will be built as part of the static library and dropped alongside it.
 If the unittests are built, the library and the tests will be built with coverage information by
 default. This can be disabled by setting the `FSFW_TESTS_COV_GEN` option to `OFF` or `FALSE`.
@@ -69,7 +106,7 @@ You can use the following commands inside the ``fsfw`` folder to set up the buil
 .. code-block:: console

   mkdir build-tests && cd build-tests
-   cmake -DFSFW_BUILD_UNITTESTS=ON -DFSFW_OSAL=host ..
+   cmake -DFSFW_BUILD_TESTS=ON -DFSFW_OSAL=host ..


 You can also use ``-DFSFW_OSAL=linux`` on Linux systems.
@@ -90,8 +127,21 @@ Building the documentation
 ----------------------------

 The FSFW documentation is built using the tools Sphinx, doxygen and breathe based on the
-instructions provided in `this blogpost <https://devblogs.microsoft.com/cppblog/clear-functional-c-documentation-with-sphinx-breathe-doxygen-cmake/>`_. You can set up a
-documentation build system using the following commands
+instructions provided in `this blogpost <https://devblogs.microsoft.com/cppblog/clear-functional-c-documentation-with-sphinx-breathe-doxygen-cmake/>`_. If you
+want to do this locally, set up the prerequisites first. This requires a ``python3``
+installation as well. Example here is for Ubuntu.
+
+.. code-block:: console
+
+   sudo apt-get install doxygen graphviz
+
+And the following Python packages
+
+.. code-block:: console
+
+   python3 -m pip install sphinx breathe
+
+You can set up a documentation build system using the following commands

 .. code-block:: bash

@@ -110,6 +160,14 @@ folder. Simply open the ``index.html`` in the webbrowser of your choice.
 The ``helper.py`` script located in the ``script`` folder can also be used to create, build
 and open the documentation conveniently. Try ``helper.py -h`` for more information.

+Formatting the source
+-----------------------
+
+The formatting is done by the ``clang-format`` tool. The configuration is contained within the
+``.clang-format`` file in the repository root. As long as ``clang-format`` is installed, you
+can run the ``apply-clang-format.sh`` helper script to format all source files consistently.
+
+
 .. _`Hosted FSFW example`: https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-hosted
 .. _`Catch2 library`: https://github.com/catchorg/Catch2
 .. _`Code coverage`: https://github.com/bilke/cmake-modules/tree/master
@@ -6,19 +6,20 @@ High-level overview
 Structure
 ----------

-The general structure is driven by the usage of interfaces provided by objects.
-The FSFW uses C++11 as baseline. The intention behind this is that this C++ Standard should be
-widely available, even with older compilers.
-The FSFW uses dynamic allocation during the initialization but provides static containers during runtime.
-This simplifies the instantiation of objects and allows the usage of some standard containers.
-Dynamic Allocation after initialization is discouraged and different solutions are provided in the
-FSFW to achieve that. The fsfw uses run-time type information but exceptions are not allowed.
+The general structure is driven by the usage of interfaces provided by objects. 
+The FSFW uses C++17 as baseline. Most modern compilers like GCC should have support for this
+standard, even for micocontrollers.
+
+The FSFW might use dynamic allocation during program initialization but not during runtime.
+It offers pool objects, static containers and it also exposes the
+`Embedded Template Library <https://www.etlcpp.com/>`_ to allow writing code which does not perform
+allocation during runtime. The fsfw uses run-time type information but will not throw exceptions.

 Failure Handling
 -----------------

 Functions should return a defined :cpp:type:`ReturnValue_t` to signal to the caller that something has
-gone wrong. Returnvalues must be unique. For this the function :cpp:func:`HasReturnvaluesIF::makeReturnCode`
+gone wrong. Returnvalues must be unique. For this the function :cpp:func:`returnvalue::makeCode`
 or the :ref:`macro MAKE_RETURN_CODE <retvalapi>` can be used. The ``CLASS_ID`` is a unique ID for that type of object.
 See the :ref:`FSFW Class IDs file <fwclassids>`. The user can add custom ``CLASS_ID``\s via the
 ``fsfwconfig`` folder.
@@ -118,7 +119,7 @@ The DH has mechanisms to monitor the communication with the physical device whic
 for FDIR reaction.  Device Handlers can be created by implementing ``DeviceHandlerBase``.
 A standard FDIR component for the DH will be created automatically but can
 be overwritten by the user. More information on DeviceHandlers can be found in the
-related [documentation section](doc/README-devicehandlers.md#top).
+related :ref:`documentation section <dhb-prim-doc>`.

 Modes and Health
 --------------------
@@ -150,7 +150,7 @@ with a housekeeping service command.
 				new PoolEntry<uint8_t>({0}));

 		poolManager.subscribeForPeriodicPacket(gyroData.getSid(), false, 4.0, false);
-		return HasReturnvaluesIF::RETURN_OK;
+		return returnvalue::OK;
 	}

 Now, if we receive some sensor data and converted them into the right format,
@@ -160,7 +160,7 @@ in any case:
 .. code-block:: cpp

 	PoolReadGuard readHelper(&gyroData);
-	if(readHelper.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
+	if(readHelper.getReadResult() == returnvalue::OK) {
 		if(not gyroData.isValid()) {
 			gyroData.setValidity(true, true);
 		}
@@ -0,0 +1 @@
+sphinx-rtd-theme==1.3.0
@@ -1,47 +0,0 @@
-cmake_minimum_required(VERSION 3.13)
-
-# Can also be changed by upper CMakeLists.txt file
-find_library(LIB_FSFW_NAME fsfw REQUIRED)
-
-option(FSFW_HAL_ADD_LINUX "Add the Linux HAL to the sources. Requires gpiod library" OFF)
-# On by default for now because I did not have an issue including and compiling those files
-# and libraries on a Desktop Linux system and the primary target of the FSFW is still embedded
-# Linux. The only exception from this is the gpiod library which requires a dedicated installation,
-# but CMake is able to determine whether this library is installed with find_library.
-option(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS "Add peripheral drivers for embedded Linux" ON)
-
-option(FSFW_HAL_ADD_RASPBERRY_PI "Add Raspberry Pi specific code to the sources" OFF)
-option(FSFW_HAL_ADD_STM32H7 "Add the STM32H7 HAL to the sources" OFF)
-option(FSFW_HAL_WARNING_SHADOW_LOCAL_GCC "Enable -Wshadow=local warning in GCC" ON)
-
-set(LINUX_HAL_PATH_NAME linux)
-set(STM32H7_PATH_NAME stm32h7)
-
-add_subdirectory(src)
-
-foreach(INCLUDE_PATH ${FSFW_HAL_ADDITIONAL_INC_PATHS})
-    if(IS_ABSOLUTE ${INCLUDE_PATH})
-        set(CURR_ABS_INC_PATH "${INCLUDE_PATH}")
-    else()
-        get_filename_component(CURR_ABS_INC_PATH
-            ${INCLUDE_PATH} REALPATH BASE_DIR ${CMAKE_SOURCE_DIR})
-    endif()
-
-    if(CMAKE_VERBOSE)
-        message(STATUS "FSFW include path: ${CURR_ABS_INC_PATH}")
-    endif()
-
-    list(APPEND FSFW_HAL_ADD_INC_PATHS_ABS ${CURR_ABS_INC_PATH})
-endforeach()
-
-target_include_directories(${LIB_FSFW_NAME} PRIVATE
-    ${FSFW_HAL_ADD_INC_PATHS_ABS}
-)
-
-target_compile_definitions(${LIB_FSFW_NAME} PRIVATE
-    ${FSFW_HAL_DEFINES}
-)
-
-target_link_libraries(${LIB_FSFW_NAME} PRIVATE
-    ${FSFW_HAL_LINK_LIBS}
-)
@@ -1,9 +0,0 @@
-target_include_directories(${LIB_FSFW_NAME} PRIVATE
-    ${CMAKE_CURRENT_SOURCE_DIR}
-)
-
-target_include_directories(${LIB_FSFW_NAME} INTERFACE
-    ${CMAKE_CURRENT_SOURCE_DIR}
-)
-
-add_subdirectory(fsfw_hal)
@@ -1 +0,0 @@
-add_subdirectory(gpio)
@@ -1,3 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-    GpioCookie.cpp
-)
@@ -1,5 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-    GyroL3GD20Handler.cpp
-    MgmRM3100Handler.cpp
-    MgmLIS3MDLHandler.cpp
-)
@@ -1 +0,0 @@
-
@@ -1,16 +0,0 @@
-if(FSFW_HAL_ADD_RASPBERRY_PI)
-    add_subdirectory(rpi)
-endif()
-
-target_sources(${LIB_FSFW_NAME} PRIVATE
-	UnixFileGuard.cpp
-	CommandExecutor.cpp
-	utility.cpp
-)
-
-if(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS)
-	add_subdirectory(gpio)
-	add_subdirectory(spi)
-	add_subdirectory(i2c)
-	add_subdirectory(uart)
-endif()
@@ -1,16 +0,0 @@
-# This abstraction layer requires the gpiod library. You can install this library
-# with "sudo apt-get install -y libgpiod-dev". If you are cross-compiling, you need
-# to install the package before syncing the sysroot to your host computer.
-find_library(LIB_GPIO gpiod)
-
-if(${LIB_GPIO} MATCHES LIB_GPIO-NOTFOUND)
-    message(STATUS "gpiod library not found, not linking against it")
-else()
-    target_sources(${LIB_FSFW_NAME} PRIVATE
-        LinuxLibgpioIF.cpp
-    )
-    target_link_libraries(${LIB_FSFW_NAME} PRIVATE
-        ${LIB_GPIO}
-    )
-endif()
-
@@ -1,8 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PUBLIC
-    I2cComIF.cpp
-    I2cCookie.cpp
-)
-
-
-
-
@@ -1,3 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-    GpioRPi.cpp
-)
@@ -1,8 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PUBLIC
-    SpiComIF.cpp
-    SpiCookie.cpp
-)
-
-
-
-
@@ -1,4 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PUBLIC
-	UartComIF.cpp
-	UartCookie.cpp
-)
@@ -1,65 +0,0 @@
-#include "fsfw_hal/linux/uart/UartCookie.h"
-
-#include <fsfw/serviceinterface.h>
-
-UartCookie::UartCookie(object_id_t handlerId, std::string deviceFile, UartModes uartMode,
-                       uint32_t baudrate, size_t maxReplyLen)
-    : handlerId(handlerId),
-      deviceFile(deviceFile),
-      uartMode(uartMode),
-      baudrate(baudrate),
-      maxReplyLen(maxReplyLen) {}
-
-UartCookie::~UartCookie() {}
-
-uint32_t UartCookie::getBaudrate() const { return baudrate; }
-
-size_t UartCookie::getMaxReplyLen() const { return maxReplyLen; }
-
-std::string UartCookie::getDeviceFile() const { return deviceFile; }
-
-void UartCookie::setParityOdd() { parity = Parity::ODD; }
-
-void UartCookie::setParityEven() { parity = Parity::EVEN; }
-
-Parity UartCookie::getParity() const { return parity; }
-
-void UartCookie::setBitsPerWord(uint8_t bitsPerWord_) {
-  switch (bitsPerWord_) {
-    case 5:
-    case 6:
-    case 7:
-    case 8:
-      break;
-    default:
-#if FSFW_CPP_OSTREAM_ENABLED == 1
-      sif::debug << "UartCookie::setBitsPerWord: Invalid bits per word specified" << std::endl;
-#endif
-      return;
-  }
-  bitsPerWord = bitsPerWord_;
-}
-
-uint8_t UartCookie::getBitsPerWord() const { return bitsPerWord; }
-
-StopBits UartCookie::getStopBits() const { return stopBits; }
-
-void UartCookie::setTwoStopBits() { stopBits = StopBits::TWO_STOP_BITS; }
-
-void UartCookie::setOneStopBit() { stopBits = StopBits::ONE_STOP_BIT; }
-
-UartModes UartCookie::getUartMode() const { return uartMode; }
-
-void UartCookie::setReadCycles(uint8_t readCycles) { this->readCycles = readCycles; }
-
-void UartCookie::setToFlushInput(bool enable) { this->flushInput = enable; }
-
-uint8_t UartCookie::getReadCycles() const { return readCycles; }
-
-bool UartCookie::getInputShouldBeFlushed() { return this->flushInput; }
-
-object_id_t UartCookie::getHandlerId() const { return this->handlerId; }
-
-void UartCookie::setNoFixedSizeReply() { replySizeFixed = false; }
-
-bool UartCookie::isReplySizeFixed() { return replySizeFixed; }
@@ -1,3 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-    GyroL3GD20H.cpp
-)
@@ -1,3 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-    gpio.cpp
-)
@@ -1,2 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-)
@@ -1,9 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-    spiCore.cpp
-    spiDefinitions.cpp
-    spiInterrupts.cpp
-    mspInit.cpp
-    SpiCookie.cpp
-    SpiComIF.cpp
-    stm32h743zi.cpp
-)
@@ -1,2 +0,0 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-)
@@ -4,6 +4,10 @@
 #include <cstddef>
 #include <cstdint>

+// It is assumed the user has a subsystem and class ID list in some user header files.
+// #include "events/subsystemIdRanges.h"
+// #include "returnvalues/classIds.h"
+
 //! Used to determine whether C++ ostreams are used which can increase
 //! the binary size significantly. If this is disabled,
 //! the C stdio functions can be used alternatively
@@ -4,7 +4,6 @@
 #include <fsfw/devicehandlers/DeviceHandlerBase.h>
 #include <fsfw/events/EventManager.h>
 #include <fsfw/health/HealthTable.h>
-#include <fsfw/tmtcpacket/pus/tm/TmPacketStored.h>
 #include <fsfw/tmtcservices/CommandingServiceBase.h>
 #include <fsfw/tmtcservices/PusServiceBase.h>
 #include <fsfw/internalerror/InternalErrorReporter.h>
@@ -35,19 +34,15 @@ void Factory::produceFsfwObjects(void) {
 }

 void Factory::setStaticFrameworkObjectIds() {
-	PusServiceBase::packetSource = objects::NO_OBJECT;
-	PusServiceBase::packetDestination = objects::NO_OBJECT;
+	PusServiceBase::PUS_DISTRIBUTOR = objects::NO_OBJECT;
+	PusServiceBase::PACKET_DESTINATION = objects::NO_OBJECT;

 	CommandingServiceBase::defaultPacketSource = objects::NO_OBJECT;
 	CommandingServiceBase::defaultPacketDestination = objects::NO_OBJECT;

-	VerificationReporter::messageReceiver = objects::PUS_SERVICE_1_VERIFICATION;
-
 	DeviceHandlerBase::powerSwitcherId = objects::NO_OBJECT;
 	DeviceHandlerBase::rawDataReceiverId = objects::PUS_SERVICE_2_DEVICE_ACCESS;

 	DeviceHandlerFailureIsolation::powerConfirmationId = objects::NO_OBJECT;
-
-	TmPacketBase::timeStamperId = objects::NO_OBJECT;
 }

@@ -11,15 +11,15 @@ ReturnValue_t pst::pollingSequenceInitDefault(

 	/* Add polling sequence table here */

-	if (thisSequence->checkSequence() == HasReturnvaluesIF::RETURN_OK) {
-		return HasReturnvaluesIF::RETURN_OK;
+	if (thisSequence->checkSequence() == returnvalue::OK) {
+		return returnvalue::OK;
 	}
 	else {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
 		sif::error << "pst::pollingSequenceInitDefault: Sequence invalid!"
 		        << std::endl;
 #endif
-		return HasReturnvaluesIF::RETURN_FAILED;
+		return returnvalue::FAILED;
 	}
 }

@@ -1,7 +1,7 @@
 #ifndef POLLINGSEQUENCEFACTORY_H_
 #define POLLINGSEQUENCEFACTORY_H_

-#include <fsfw/returnvalues/HasReturnvaluesIF.h>
+#include <fsfw/returnvalues/returnvalue.h>

 class FixedTimeslotTaskIF;

@@ -1,8 +0,0 @@
-#!/bin/bash
-if [[ ! -f README.md ]]; then
-	cd ..
-fi
-
-find ./src -iname *.h -o -iname *.cpp -o -iname *.c | xargs clang-format --style=file -i
-find ./hal -iname *.h -o -iname *.cpp -o -iname *.c | xargs clang-format --style=file -i
-find ./tests -iname *.h -o -iname *.cpp -o -iname *.c | xargs clang-format --style=file -i
@@ -0,0 +1,30 @@
+#!/bin/bash
+if [[ ! -f README.md ]]; then
+  cd ..
+fi
+
+folder_list=(
+  "./src"
+  "./unittests"
+)
+
+cmake_fmt="cmake-format"
+file_selectors="-iname CMakeLists.txt"
+if command -v ${cmake_fmt} &> /dev/null; then
+  ${cmake_fmt} -i CMakeLists.txt
+  find ./src ${file_selectors} | xargs ${cmake_fmt} -i
+  find ./unittests ${file_selectors} | xargs ${cmake_fmt} -i
+else
+  echo "No ${cmake_fmt} tool found, not formatting CMake files"
+fi
+
+cpp_format="clang-format"
+file_selectors="-iname *.h -o -iname *.cpp -o -iname *.c -o -iname *.tpp"
+if command -v ${cpp_format} &> /dev/null; then
+  for dir in ${folder_list[@]}; do
+    echo "Auto-formatting ${dir} recursively"
+    find ${dir} ${file_selectors} | xargs clang-format --style=file -i
+  done
+else
+  echo "No ${cpp_format} tool found, not formatting C++/C files"
+fi
@@ -0,0 +1,110 @@
+#! /bin/python
+
+
+import argparse
+import json
+import urllib.request
+import re
+from pathlib import Path
+
+def main() -> None:
+    parser = argparse.ArgumentParser(
+        description="List undocumented PRs"
+    )
+    parser.add_argument("-v", "--version", type=str, required=True)
+    args = parser.parse_args()
+    
+    match = re.search("([0-9]+\.[0-9]+\.[0-9]+)", args.version)
+    
+    if not match:
+        print("invalid version")
+        exit(1)
+    
+    version = "v" + match.group(1)
+    
+    print("looking for milestone for " + version + " ...")
+    
+    
+    with urllib.request.urlopen("https://egit.irs.uni-stuttgart.de/api/v1/repos/fsfw/fsfw/milestones?name=" + version) as milestone_json:
+        milestones = json.load(milestone_json)
+        if (len(milestones) == 0):
+            print("did not find any milestone")
+            exit(1)
+        if (len(milestones) > 1):
+            print("found multiple milestons")
+        milestone_title = milestones[0]['title']
+        milestone = str(milestones[0]['id'])
+        print("Using Milestone \""+ milestone_title + "\" with id " + milestone)
+    
+    milestone_prs = []
+    
+    page = 1
+    last_count = 1;
+    while last_count != 0:
+        with urllib.request.urlopen("https://egit.irs.uni-stuttgart.de/api/v1/repos/fsfw/fsfw/pulls?state=closed&milestone=" + str(milestone) + "&limit=100&page=" + str(page)) as pull_requests_json:
+            pull_requests = json.load(pull_requests_json)
+            for pr in pull_requests:
+                milestone_prs.append({'number': str(pr['number']), 'title' : pr['title']})
+            page += 1
+            last_count = len(pull_requests)
+    
+    print("Found " + str(len(milestone_prs)) + " closed PRs in Milestone")
+    
+    print("looking for CHANGELOG.md ...")
+    
+    path = Path(".")
+    
+    files = list(path.glob("CHANGELOG.md"))
+    
+    if (len(files) != 1):
+        files = list(path.glob("../CHANGELOG.md"))
+        
+    if (len(files) != 1):
+        print("did not find CHANGELOG.md. Run script in either root directory or scripts subfolder.")
+        exit(1)
+        
+    print("Scanning CHANGELOG.md ...")
+    
+    changelog_prs = []
+    
+    with open(files[0]) as changelog:
+        line = changelog.readline()
+        while (line):
+            #print("line: " + line)
+            match = re.search("\#.+(v[0-9]+\.[0-9]+\.[0-9]+)", line)
+            if (match):
+                if match.group(1) == version:
+                    #print("found version")
+                    line = changelog.readline()
+                    continue
+                else:
+                    #print("done with " + match.group(1))
+                    break
+            
+            match = re.search("PR: https://egit\.irs\.uni-stuttgart\.de/fsfw/fsfw/pulls/([0-9]+)", line)
+            if match:
+                changelog_prs.append(match.group(1))
+                
+            line = changelog.readline()
+    
+    print("Found " + str(len(changelog_prs)) + " PRs in CHANGELOG.md")
+    
+    print("")
+    
+    copy_array = changelog_prs.copy()
+    print("PRs in CHANGELOG.md that are not in Milestone:")
+    for pr in milestone_prs:
+        if pr['number'] in copy_array:
+            copy_array.remove(pr['number'])
+    for pr in copy_array:
+        print("https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/" + pr)
+
+    print("")
+
+    print("PRs in milestone that are not in CHANGELOG.md:")
+    
+    for pr in milestone_prs:
+        if pr['number'] not in changelog_prs:
+            print("- " + pr['title'] + "\n  PR: https://egit.irs.uni-stuttgart.de/fsfw/fsfw/pulls/" + pr['number'])
+
+main()
@@ -13,7 +13,7 @@ from shutil import which
 from typing import List


-UNITTEST_FOLDER_NAME = "build-tests"
+UNITTEST_FOLDER_NAME = "cmake-build-tests"
 DOCS_FOLDER_NAME = "build-docs"


@@ -48,6 +48,20 @@ def main():
        action="store_true",
        help="Run valgrind on generated test binary",
    )
+    parser.add_argument(
+        "-g",
+        "--generators",
+        default="Ninja",
+        action="store",
+        help="CMake generators",
+    )
+    parser.add_argument(
+        "-w",
+        "--windows",
+        default=False,
+        action="store_true",
+        help="Run on windows",
+    )

    args = parser.parse_args()
    if args.all:
@@ -97,11 +111,11 @@ def handle_docs_type(args, build_dir_list: list):
        build_directory = determine_build_dir(build_dir_list)
    os.chdir(build_directory)
    if args.build:
-        os.system("cmake --build . -j")
+        cmd_runner("cmake --build . -j")
    if args.open:
        if not os.path.isfile("docs/sphinx/index.html"):
            # try again..
-            os.system("cmake --build . -j")
+            cmd_runner("cmake --build . -j")
            if not os.path.isfile("docs/sphinx/index.html"):
                print(
                    "No Sphinx documentation file detected. "
@@ -115,14 +129,14 @@ def handle_tests_type(args, build_dir_list: list):
    if args.create:
        if os.path.exists(UNITTEST_FOLDER_NAME):
            shutil.rmtree(UNITTEST_FOLDER_NAME)
-        create_tests_build_cfg()
+        create_tests_build_cfg(args)
        build_directory = UNITTEST_FOLDER_NAME
    elif len(build_dir_list) == 0:
        print(
            "No valid CMake tests build directory found. "
            "Trying to set up test build system"
        )
-        create_tests_build_cfg()
+        create_tests_build_cfg(args)
        build_directory = UNITTEST_FOLDER_NAME
    elif len(build_dir_list) == 1:
        build_directory = build_dir_list[0]
@@ -143,22 +157,34 @@ def handle_tests_type(args, build_dir_list: list):
        if which("valgrind") is None:
            print("Please install valgrind first")
            sys.exit(1)
-        os.chdir(UNITTEST_FOLDER_NAME)
-        os.system("valgrind --leak-check=full ./fsfw-tests")
+        cmd_runner("valgrind --leak-check=full ./fsfw-tests")
        os.chdir("..")


-def create_tests_build_cfg():
+def create_tests_build_cfg(args):
    os.mkdir(UNITTEST_FOLDER_NAME)
    os.chdir(UNITTEST_FOLDER_NAME)
-    os.system("cmake -DFSFW_OSAL=host -DFSFW_BUILD_UNITTESTS=ON ..")
+    if args.windows:
+        cmake_cmd = (
+            'cmake -G "'
+            + args.generators
+            + '" -DFSFW_OSAL=host -DFSFW_BUILD_TESTS=ON \
+        -DGCOVR_PATH="py -m gcovr" ..'
+        )
+    else:
+        cmake_cmd = (
+            'cmake -G "'
+            + args.generators
+            + '" -DFSFW_OSAL=host -DFSFW_BUILD_TESTS=ON ..'
+        )
+    cmd_runner(cmake_cmd)
    os.chdir("..")


 def create_docs_build_cfg():
    os.mkdir(DOCS_FOLDER_NAME)
    os.chdir(DOCS_FOLDER_NAME)
-    os.system("cmake -DFSFW_OSAL=host -DFSFW_BUILD_DOCS=ON ..")
+    cmd_runner("cmake -DFSFW_OSAL=host -DFSFW_BUILD_DOCS=ON ..")
    os.chdir("..")


@@ -181,7 +207,7 @@ def check_for_cmake_build_dir(build_dir_list: list) -> list:
 def perform_lcov_operation(directory: str, chdir: bool):
    if chdir:
        os.chdir(directory)
-    os.system("cmake --build . -- fsfw-tests_coverage -j")
+    cmd_runner("cmake --build . -j -- fsfw-tests_coverage")


 def determine_build_dir(build_dir_list: List[str]):
@@ -203,5 +229,10 @@ def determine_build_dir(build_dir_list: List[str]):
    return build_directory


+def cmd_runner(cmd: str):
+    print(f"Executing command: {cmd}")
+    os.system(cmd)
+
+
 if __name__ == "__main__":
    main()
@@ -1,9 +1,11 @@
-target_include_directories(${LIB_FSFW_NAME} PRIVATE
-    ${CMAKE_CURRENT_SOURCE_DIR}
-)
+target_include_directories(${LIB_FSFW_NAME} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR})

-target_include_directories(${LIB_FSFW_NAME} INTERFACE
-    ${CMAKE_CURRENT_SOURCE_DIR}
-)
+target_include_directories(${LIB_FSFW_NAME}
+                           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR})

 add_subdirectory(fsfw)
+if(FSFW_ADD_HAL)
+  add_subdirectory(fsfw_hal)
+endif()
+
+add_subdirectory(fsfw_tests)
@@ -1,3 +1,5 @@
+target_sources(${LIB_FSFW_NAME} PRIVATE version.cpp)
+
 # Core

 add_subdirectory(action)
@@ -29,26 +31,27 @@ add_subdirectory(thermal)
 add_subdirectory(timemanager)
 add_subdirectory(tmtcpacket)
 add_subdirectory(tmtcservices)
+add_subdirectory(filesystem)

 # Optional

 if(FSFW_ADD_MONITORING)
-add_subdirectory(monitoring)
+  add_subdirectory(monitoring)
 endif()
 if(FSFW_ADD_PUS)
-    add_subdirectory(pus)
+  add_subdirectory(pus)
 endif()
 if(FSFW_ADD_TMSTORAGE)
-    add_subdirectory(tmstorage)
+  add_subdirectory(tmstorage)
 endif()
 if(FSFW_ADD_COORDINATES)
-    add_subdirectory(coordinates)
+  add_subdirectory(coordinates)
 endif()
 if(FSFW_ADD_RMAP)
-    add_subdirectory(rmap)
+  add_subdirectory(rmap)
 endif()
 if(FSFW_ADD_DATALINKLAYER)
-    add_subdirectory(datalinklayer)
+  add_subdirectory(datalinklayer)
 endif()

 # OSAL
@@ -30,6 +30,10 @@
 #define FSFW_VERBOSE_LEVEL                  1
 #endif /* FSFW_VERBOSE_LEVEL */

+#ifndef FSFW_DISABLE_PRINTOUT
+#define FSFW_DISABLE_PRINTOUT               0
+#endif
+
 #ifndef FSFW_USE_REALTIME_FOR_LINUX
 #define FSFW_USE_REALTIME_FOR_LINUX         0
 #endif /* FSFW_USE_REALTIME_FOR_LINUX */
@@ -57,16 +61,9 @@
 #define FSFW_HAL_SPI_WIRETAPPING            0
 #endif

-#ifndef FSFW_HAL_L3GD20_GYRO_DEBUG
-#define FSFW_HAL_L3GD20_GYRO_DEBUG          0
-#endif /* FSFW_HAL_L3GD20_GYRO_DEBUG */
-
-#ifndef FSFW_HAL_RM3100_MGM_DEBUG
-#define FSFW_HAL_RM3100_MGM_DEBUG           0
-#endif /* FSFW_HAL_RM3100_MGM_DEBUG */
-
-#ifndef FSFW_HAL_LIS3MDL_MGM_DEBUG
-#define FSFW_HAL_LIS3MDL_MGM_DEBUG          0
-#endif /* FSFW_HAL_LIS3MDL_MGM_DEBUG */
+// Can be used for low-level debugging of the I2C bus
+#ifndef FSFW_HAL_I2C_WIRETAPPING
+#define FSFW_HAL_I2C_WIRETAPPING            0
+#endif

 #endif /* FSFW_FSFW_H_ */
@@ -1,9 +1,11 @@
 #ifndef FSFW_VERSION_H_
 #define FSFW_VERSION_H_

-// Versioning is kept in project CMakeLists.txt file
-#define FSFW_VERSION @FSFW_VERSION@
-#define FSFW_SUBVERSION @FSFW_SUBVERSION@
-#define FSFW_REVISION @FSFW_REVISION@
+// Versioning is managed in project CMakeLists.txt file
+static constexpr int FSFW_VERSION_MAJOR = @FSFW_VERSION@;
+static constexpr int FSFW_VERSION_MINOR = @FSFW_SUBVERSION@;
+static constexpr int FSFW_VERSION_REVISION = @FSFW_REVISION@;
+// Also contains CST (Commits since tag) information
+static const char FSFW_VCS_INFO[] = "@FSFW_VCS_INFO@";

 #endif /* FSFW_VERSION_H_ */
@@ -6,13 +6,13 @@
 ActionHelper::ActionHelper(HasActionsIF* setOwner, MessageQueueIF* useThisQueue)
    : owner(setOwner), queueToUse(useThisQueue) {}

-ActionHelper::~ActionHelper() {}
+ActionHelper::~ActionHelper() = default;

 ReturnValue_t ActionHelper::handleActionMessage(CommandMessage* command) {
  if (command->getCommand() == ActionMessage::EXECUTE_ACTION) {
    ActionId_t currentAction = ActionMessage::getActionId(command);
    prepareExecution(command->getSender(), currentAction, ActionMessage::getStoreId(command));
-    return HasReturnvaluesIF::RETURN_OK;
+    return returnvalue::OK;
  } else {
    return CommandMessage::UNKNOWN_COMMAND;
  }
@@ -21,7 +21,7 @@ ReturnValue_t ActionHelper::handleActionMessage(CommandMessage* command) {
 ReturnValue_t ActionHelper::initialize(MessageQueueIF* queueToUse_) {
  ipcStore = ObjectManager::instance()->get<StorageManagerIF>(objects::IPC_STORE);
  if (ipcStore == nullptr) {
-    return HasReturnvaluesIF::RETURN_FAILED;
+    return returnvalue::FAILED;
  }
  if (queueToUse_ != nullptr) {
    setQueueToUse(queueToUse_);
@@ -35,10 +35,10 @@ ReturnValue_t ActionHelper::initialize(MessageQueueIF* queueToUse_) {
    sif::printWarning("ActionHelper::initialize: No queue set\n");
 #endif
 #endif /* FSFW_VERBOSE_LEVEL >= 1 */
-    return HasReturnvaluesIF::RETURN_FAILED;
+    return returnvalue::FAILED;
  }

-  return HasReturnvaluesIF::RETURN_OK;
+  return returnvalue::OK;
 }

 void ActionHelper::step(uint8_t step, MessageQueueId_t reportTo, ActionId_t commandId,
@@ -59,23 +59,30 @@ void ActionHelper::setQueueToUse(MessageQueueIF* queue) { queueToUse = queue; }

 void ActionHelper::prepareExecution(MessageQueueId_t commandedBy, ActionId_t actionId,
                                    store_address_t dataAddress) {
-  const uint8_t* dataPtr = NULL;
+  bool hasAdditionalData = false;
+  const uint8_t* dataPtr = nullptr;
  size_t size = 0;
-  ReturnValue_t result = ipcStore->getData(dataAddress, &dataPtr, &size);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
-    CommandMessage reply;
-    ActionMessage::setStepReply(&reply, actionId, 0, result);
-    queueToUse->sendMessage(commandedBy, &reply);
-    return;
+  ReturnValue_t result;
+  if (dataAddress != store_address_t::invalid()) {
+    hasAdditionalData = true;
+    ReturnValue_t result = ipcStore->getData(dataAddress, &dataPtr, &size);
+    if (result != returnvalue::OK) {
+      CommandMessage reply;
+      ActionMessage::setStepReply(&reply, actionId, 0, result);
+      queueToUse->sendMessage(commandedBy, &reply);
+      return;
+    }
  }
  result = owner->executeAction(actionId, commandedBy, dataPtr, size);
-  ipcStore->deleteData(dataAddress);
+  if (hasAdditionalData) {
+    ipcStore->deleteData(dataAddress);
+  }
  if (result == HasActionsIF::EXECUTION_FINISHED) {
    CommandMessage reply;
    ActionMessage::setCompletionReply(&reply, actionId, true, result);
    queueToUse->sendMessage(commandedBy, &reply);
  }
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    CommandMessage reply;
    ActionMessage::setStepReply(&reply, actionId, 0, result);
    queueToUse->sendMessage(commandedBy, &reply);
@@ -91,11 +98,11 @@ ReturnValue_t ActionHelper::reportData(MessageQueueId_t reportTo, ActionId_t rep
  size_t maxSize = data->getSerializedSize();
  if (maxSize == 0) {
    /* No error, there's simply nothing to report. */
-    return HasReturnvaluesIF::RETURN_OK;
+    return returnvalue::OK;
  }
  size_t size = 0;
  ReturnValue_t result = ipcStore->getFreeElement(&storeAddress, maxSize, &dataPtr);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
    sif::warning << "ActionHelper::reportData: Getting free element from IPC store failed!"
                 << std::endl;
@@ -107,7 +114,7 @@ ReturnValue_t ActionHelper::reportData(MessageQueueId_t reportTo, ActionId_t rep
    return result;
  }
  result = data->serialize(&dataPtr, &size, maxSize, SerializeIF::Endianness::BIG);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    ipcStore->deleteData(storeAddress);
    return result;
  }
@@ -124,7 +131,7 @@ ReturnValue_t ActionHelper::reportData(MessageQueueId_t reportTo, ActionId_t rep
    result = queueToUse->sendMessage(reportTo, &reply);
  }

-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    ipcStore->deleteData(storeAddress);
  }
  return result;
@@ -137,7 +144,7 @@ ReturnValue_t ActionHelper::reportData(MessageQueueId_t reportTo, ActionId_t rep
  CommandMessage reply;
  store_address_t storeAddress;
  ReturnValue_t result = ipcStore->addData(&storeAddress, data, dataSize);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
    sif::warning << "ActionHelper::reportData: Adding data to IPC store failed!" << std::endl;
 #else
@@ -158,7 +165,7 @@ ReturnValue_t ActionHelper::reportData(MessageQueueId_t reportTo, ActionId_t rep
    result = queueToUse->sendMessage(reportTo, &reply);
  }

-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    ipcStore->deleteData(storeAddress);
  }
  return result;
@@ -1,9 +1,9 @@
 #ifndef FSFW_ACTION_ACTIONHELPER_H_
 #define FSFW_ACTION_ACTIONHELPER_H_

-#include "../ipc/MessageQueueIF.h"
-#include "../serialize/SerializeIF.h"
 #include "ActionMessage.h"
+#include "fsfw/ipc/MessageQueueIF.h"
+#include "fsfw/serialize/SerializeIF.h"
 /**
 * @brief Action Helper is a helper class which handles action messages
 *
@@ -36,7 +36,7 @@ class ActionHelper {
   * send to the sender of the message automatically.
   *
   * @param command Pointer to a command message received by the owner
-   * @return HasReturnvaluesIF::RETURN_OK if the message is a action message,
+   * @return returnvalue::OK if the message is a action message,
   *         CommandMessage::UNKNOW_COMMAND if this message ID is unkown
   */
  ReturnValue_t handleActionMessage(CommandMessage* command);
@@ -45,7 +45,7 @@ class ActionHelper {
   * helper function
   * @param queueToUse_   Pointer to the messageQueue to be used, optional
   *                      if queue was set in constructor
-   * @return Returns RETURN_OK if successful
+   * @return Returns returnvalue::OK if successful
   */
  ReturnValue_t initialize(MessageQueueIF* queueToUse_ = nullptr);
  /**
@@ -58,7 +58,7 @@ class ActionHelper {
   * @param result Result of the execution
   */
  void step(uint8_t step, MessageQueueId_t reportTo, ActionId_t commandId,
-            ReturnValue_t result = HasReturnvaluesIF::RETURN_OK);
+            ReturnValue_t result = returnvalue::OK);
  /**
   * Function to be called by the owner to send a action completion message
   * @param success   Specify whether action was completed successfully or not.
@@ -67,7 +67,7 @@ class ActionHelper {
   * @param result Result of the execution
   */
  void finish(bool success, MessageQueueId_t reportTo, ActionId_t commandId,
-              ReturnValue_t result = HasReturnvaluesIF::RETURN_OK);
+              ReturnValue_t result = returnvalue::OK);
  /**
   * Function to be called by the owner if an action does report data.
   * Takes a SerializeIF* pointer and serializes it into the IPC store.
@@ -75,7 +75,7 @@ class ActionHelper {
   *                  message to
   * @param replyId ID of the executed command
   * @param data Pointer to the data
-   * @return Returns RETURN_OK if successful, otherwise failure code
+   * @return Returns returnvalue::OK if successful, otherwise failure code
   */
  ReturnValue_t reportData(MessageQueueId_t reportTo, ActionId_t replyId, SerializeIF* data,
                           bool hideSender = false);
@@ -86,7 +86,7 @@ class ActionHelper {
   *                  message to
   * @param replyId ID of the executed command
   * @param data Pointer to the data
-   * @return Returns RETURN_OK if successful, otherwise failure code
+   * @return Returns returnvalue::OK if successful, otherwise failure code
   */
  ReturnValue_t reportData(MessageQueueId_t reportTo, ActionId_t replyId, const uint8_t* data,
                           size_t dataSize, bool hideSender = false);
@@ -2,9 +2,9 @@
 #include "fsfw/objectmanager/ObjectManager.h"
 #include "fsfw/storagemanager/StorageManagerIF.h"

-ActionMessage::ActionMessage() {}
+ActionMessage::ActionMessage() = default;

-ActionMessage::~ActionMessage() {}
+ActionMessage::~ActionMessage() = default;

 void ActionMessage::setCommand(CommandMessage* message, ActionId_t fid,
                               store_address_t parameters) {
@@ -25,7 +25,7 @@ store_address_t ActionMessage::getStoreId(const CommandMessage* message) {

 void ActionMessage::setStepReply(CommandMessage* message, ActionId_t fid, uint8_t step,
                                 ReturnValue_t result) {
-  if (result == HasReturnvaluesIF::RETURN_OK) {
+  if (result == returnvalue::OK) {
    message->setCommand(STEP_SUCCESS);
  } else {
    message->setCommand(STEP_FAILED);
@@ -64,9 +64,8 @@ void ActionMessage::clear(CommandMessage* message) {
  switch (message->getCommand()) {
    case EXECUTE_ACTION:
    case DATA_REPLY: {
-      StorageManagerIF* ipcStore =
-          ObjectManager::instance()->get<StorageManagerIF>(objects::IPC_STORE);
-      if (ipcStore != NULL) {
+      auto* ipcStore = ObjectManager::instance()->get<StorageManagerIF>(objects::IPC_STORE);
+      if (ipcStore != nullptr) {
        ipcStore->deleteData(getStoreId(message));
      }
      break;
@@ -33,12 +33,12 @@ class ActionMessage {
  static store_address_t getStoreId(const CommandMessage* message);

  static void setStepReply(CommandMessage* message, ActionId_t fid, uint8_t step,
-                           ReturnValue_t result = HasReturnvaluesIF::RETURN_OK);
+                           ReturnValue_t result = returnvalue::OK);
  static uint8_t getStep(const CommandMessage* message);
  static ReturnValue_t getReturnCode(const CommandMessage* message);
  static void setDataReply(CommandMessage* message, ActionId_t actionId, store_address_t data);
  static void setCompletionReply(CommandMessage* message, ActionId_t fid, bool success,
-                                 ReturnValue_t result = HasReturnvaluesIF::RETURN_OK);
+                                 ReturnValue_t result = returnvalue::OK);

  static void clear(CommandMessage* message);
 };
@@ -1,7 +1,3 @@
-target_sources(${LIB_FSFW_NAME} 
-    PRIVATE 
-        ActionHelper.cpp
-        ActionMessage.cpp
-        CommandActionHelper.cpp
-        SimpleActionHelper.cpp
-)
+target_sources(
+  ${LIB_FSFW_NAME} PRIVATE ActionHelper.cpp ActionMessage.cpp
+                           CommandActionHelper.cpp SimpleActionHelper.cpp)
@@ -2,26 +2,26 @@
 #include "fsfw/objectmanager/ObjectManager.h"

 CommandActionHelper::CommandActionHelper(CommandsActionsIF *setOwner)
-    : owner(setOwner), queueToUse(NULL), ipcStore(NULL), commandCount(0), lastTarget(0) {}
+    : owner(setOwner), queueToUse(nullptr), ipcStore(nullptr), commandCount(0), lastTarget(0) {}

-CommandActionHelper::~CommandActionHelper() {}
+CommandActionHelper::~CommandActionHelper() = default;

 ReturnValue_t CommandActionHelper::commandAction(object_id_t commandTo, ActionId_t actionId,
                                                 SerializeIF *data) {
-  HasActionsIF *receiver = ObjectManager::instance()->get<HasActionsIF>(commandTo);
-  if (receiver == NULL) {
+  auto *receiver = ObjectManager::instance()->get<HasActionsIF>(commandTo);
+  if (receiver == nullptr) {
    return CommandsActionsIF::OBJECT_HAS_NO_FUNCTIONS;
  }
  store_address_t storeId;
  uint8_t *storePointer;
  size_t maxSize = data->getSerializedSize();
  ReturnValue_t result = ipcStore->getFreeElement(&storeId, maxSize, &storePointer);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    return result;
  }
  size_t size = 0;
  result = data->serialize(&storePointer, &size, maxSize, SerializeIF::Endianness::BIG);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    return result;
  }
  return sendCommand(receiver->getCommandQueue(), actionId, storeId);
@@ -29,16 +29,13 @@ ReturnValue_t CommandActionHelper::commandAction(object_id_t commandTo, ActionId

 ReturnValue_t CommandActionHelper::commandAction(object_id_t commandTo, ActionId_t actionId,
                                                 const uint8_t *data, uint32_t size) {
-  //    if (commandCount != 0) {
-  //        return CommandsFunctionsIF::ALREADY_COMMANDING;
-  //    }
-  HasActionsIF *receiver = ObjectManager::instance()->get<HasActionsIF>(commandTo);
-  if (receiver == NULL) {
+  auto *receiver = ObjectManager::instance()->get<HasActionsIF>(commandTo);
+  if (receiver == nullptr) {
    return CommandsActionsIF::OBJECT_HAS_NO_FUNCTIONS;
  }
  store_address_t storeId;
  ReturnValue_t result = ipcStore->addData(&storeId, data, size);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    return result;
  }
  return sendCommand(receiver->getCommandQueue(), actionId, storeId);
@@ -49,7 +46,7 @@ ReturnValue_t CommandActionHelper::sendCommand(MessageQueueId_t queueId, ActionI
  CommandMessage command;
  ActionMessage::setCommand(&command, actionId, storeId);
  ReturnValue_t result = queueToUse->sendMessage(queueId, &command);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    ipcStore->deleteData(storeId);
  }
  lastTarget = queueId;
@@ -59,55 +56,55 @@ ReturnValue_t CommandActionHelper::sendCommand(MessageQueueId_t queueId, ActionI

 ReturnValue_t CommandActionHelper::initialize() {
  ipcStore = ObjectManager::instance()->get<StorageManagerIF>(objects::IPC_STORE);
-  if (ipcStore == NULL) {
-    return HasReturnvaluesIF::RETURN_FAILED;
+  if (ipcStore == nullptr) {
+    return returnvalue::FAILED;
  }

  queueToUse = owner->getCommandQueuePtr();
-  if (queueToUse == NULL) {
-    return HasReturnvaluesIF::RETURN_FAILED;
+  if (queueToUse == nullptr) {
+    return returnvalue::FAILED;
  }
-  return HasReturnvaluesIF::RETURN_OK;
+  return returnvalue::OK;
 }

 ReturnValue_t CommandActionHelper::handleReply(CommandMessage *reply) {
  if (reply->getSender() != lastTarget) {
-    return HasReturnvaluesIF::RETURN_FAILED;
+    return returnvalue::FAILED;
  }
  switch (reply->getCommand()) {
    case ActionMessage::COMPLETION_SUCCESS:
      commandCount--;
      owner->completionSuccessfulReceived(ActionMessage::getActionId(reply));
-      return HasReturnvaluesIF::RETURN_OK;
+      return returnvalue::OK;
    case ActionMessage::COMPLETION_FAILED:
      commandCount--;
      owner->completionFailedReceived(ActionMessage::getActionId(reply),
                                      ActionMessage::getReturnCode(reply));
-      return HasReturnvaluesIF::RETURN_OK;
+      return returnvalue::OK;
    case ActionMessage::STEP_SUCCESS:
      owner->stepSuccessfulReceived(ActionMessage::getActionId(reply),
                                    ActionMessage::getStep(reply));
-      return HasReturnvaluesIF::RETURN_OK;
+      return returnvalue::OK;
    case ActionMessage::STEP_FAILED:
      commandCount--;
      owner->stepFailedReceived(ActionMessage::getActionId(reply), ActionMessage::getStep(reply),
                                ActionMessage::getReturnCode(reply));
-      return HasReturnvaluesIF::RETURN_OK;
+      return returnvalue::OK;
    case ActionMessage::DATA_REPLY:
      extractDataForOwner(ActionMessage::getActionId(reply), ActionMessage::getStoreId(reply));
-      return HasReturnvaluesIF::RETURN_OK;
+      return returnvalue::OK;
    default:
-      return HasReturnvaluesIF::RETURN_FAILED;
+      return returnvalue::FAILED;
  }
 }

 uint8_t CommandActionHelper::getCommandCount() const { return commandCount; }

 void CommandActionHelper::extractDataForOwner(ActionId_t actionId, store_address_t storeId) {
-  const uint8_t *data = NULL;
+  const uint8_t *data = nullptr;
  size_t size = 0;
  ReturnValue_t result = ipcStore->getData(storeId, &data, &size);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    return;
  }
  owner->dataReceived(actionId, data, size);
@@ -4,7 +4,7 @@
 #include "ActionMessage.h"
 #include "fsfw/ipc/MessageQueueIF.h"
 #include "fsfw/objectmanager/ObjectManagerIF.h"
-#include "fsfw/returnvalues/HasReturnvaluesIF.h"
+#include "fsfw/returnvalues/returnvalue.h"
 #include "fsfw/serialize/SerializeIF.h"
 #include "fsfw/storagemanager/StorageManagerIF.h"

@@ -14,14 +14,14 @@ class CommandActionHelper {
  friend class CommandsActionsIF;

 public:
-  CommandActionHelper(CommandsActionsIF* owner);
+  explicit CommandActionHelper(CommandsActionsIF* owner);
  virtual ~CommandActionHelper();
-  ReturnValue_t commandAction(object_id_t commandTo, ActionId_t actionId, const uint8_t* data,
-                              uint32_t size);
+  ReturnValue_t commandAction(object_id_t commandTo, ActionId_t actionId,
+                              const uint8_t* data = nullptr, uint32_t size = 0);
  ReturnValue_t commandAction(object_id_t commandTo, ActionId_t actionId, SerializeIF* data);
  ReturnValue_t initialize();
  ReturnValue_t handleReply(CommandMessage* reply);
-  uint8_t getCommandCount() const;
+  [[nodiscard]] uint8_t getCommandCount() const;

 private:
  CommandsActionsIF* owner;
@@ -1,9 +1,9 @@
 #ifndef FSFW_ACTION_COMMANDSACTIONSIF_H_
 #define FSFW_ACTION_COMMANDSACTIONSIF_H_

-#include "../ipc/MessageQueueIF.h"
-#include "../returnvalues/HasReturnvaluesIF.h"
 #include "CommandActionHelper.h"
+#include "fsfw/ipc/MessageQueueIF.h"
+#include "fsfw/returnvalues/returnvalue.h"

 /**
 * Interface to separate commanding actions of other objects.
@@ -21,7 +21,7 @@ class CommandsActionsIF {
  static const uint8_t INTERFACE_ID = CLASS_ID::COMMANDS_ACTIONS_IF;
  static const ReturnValue_t OBJECT_HAS_NO_FUNCTIONS = MAKE_RETURN_CODE(1);
  static const ReturnValue_t ALREADY_COMMANDING = MAKE_RETURN_CODE(2);
-  virtual ~CommandsActionsIF() {}
+  virtual ~CommandsActionsIF() = default;
  virtual MessageQueueIF* getCommandQueuePtr() = 0;

 protected:
@@ -1,11 +1,11 @@
 #ifndef FSFW_ACTION_HASACTIONSIF_H_
 #define FSFW_ACTION_HASACTIONSIF_H_

-#include "../ipc/MessageQueueIF.h"
-#include "../returnvalues/HasReturnvaluesIF.h"
 #include "ActionHelper.h"
 #include "ActionMessage.h"
 #include "SimpleActionHelper.h"
+#include "fsfw/ipc/MessageQueueIF.h"
+#include "fsfw/returnvalues/returnvalue.h"

 /**
 * @brief
@@ -40,12 +40,12 @@ class HasActionsIF {
  static const ReturnValue_t INVALID_PARAMETERS = MAKE_RETURN_CODE(2);
  static const ReturnValue_t EXECUTION_FINISHED = MAKE_RETURN_CODE(3);
  static const ReturnValue_t INVALID_ACTION_ID = MAKE_RETURN_CODE(4);
-  virtual ~HasActionsIF() {}
+  virtual ~HasActionsIF() = default;
  /**
   * Function to get the MessageQueueId_t of the implementing object
   * @return MessageQueueId_t of the object
   */
-  virtual MessageQueueId_t getCommandQueue() const = 0;
+  [[nodiscard]] virtual MessageQueueId_t getCommandQueue() const = 0;
  /**
   * Execute or initialize the execution of a certain function.
   * The ActionHelpers will execute this function and behave differently
@@ -53,7 +53,7 @@ class HasActionsIF {
   *
   * @return
   * -@c EXECUTION_FINISHED Finish reply will be generated
-   * -@c Not RETURN_OK Step failure reply will be generated
+   * -@c Not returnvalue::OK Step failure reply will be generated
   */
  virtual ReturnValue_t executeAction(ActionId_t actionId, MessageQueueId_t commandedBy,
                                      const uint8_t* data, size_t size) = 0;
@@ -3,13 +3,13 @@
 SimpleActionHelper::SimpleActionHelper(HasActionsIF* setOwner, MessageQueueIF* useThisQueue)
    : ActionHelper(setOwner, useThisQueue), isExecuting(false) {}

-SimpleActionHelper::~SimpleActionHelper() {}
+SimpleActionHelper::~SimpleActionHelper() = default;

 void SimpleActionHelper::step(ReturnValue_t result) {
  // STEP_OFFESET is subtracted to compensate for adding offset in base
  // method, which is not necessary here.
  ActionHelper::step(stepCount - STEP_OFFSET, lastCommander, lastAction, result);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    resetHelper();
  }
 }
@@ -38,10 +38,10 @@ void SimpleActionHelper::prepareExecution(MessageQueueId_t commandedBy, ActionId
    ActionMessage::setStepReply(&reply, actionId, 0, HasActionsIF::IS_BUSY);
    queueToUse->sendMessage(commandedBy, &reply);
  }
-  const uint8_t* dataPtr = NULL;
+  const uint8_t* dataPtr = nullptr;
  size_t size = 0;
  ReturnValue_t result = ipcStore->getData(dataAddress, &dataPtr, &size);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
    ActionMessage::setStepReply(&reply, actionId, 0, result);
    queueToUse->sendMessage(commandedBy, &reply);
    return;
@@ -51,12 +51,12 @@ void SimpleActionHelper::prepareExecution(MessageQueueId_t commandedBy, ActionId
  result = owner->executeAction(actionId, commandedBy, dataPtr, size);
  ipcStore->deleteData(dataAddress);
  switch (result) {
-    case HasReturnvaluesIF::RETURN_OK:
+    case returnvalue::OK:
      isExecuting = true;
      stepCount++;
      break;
    case HasActionsIF::EXECUTION_FINISHED:
-      ActionMessage::setCompletionReply(&reply, actionId, true, HasReturnvaluesIF::RETURN_OK);
+      ActionMessage::setCompletionReply(&reply, actionId, true, returnvalue::OK);
      queueToUse->sendMessage(commandedBy, &reply);
      break;
    default:
@@ -11,15 +11,15 @@
 class SimpleActionHelper : public ActionHelper {
 public:
  SimpleActionHelper(HasActionsIF* setOwner, MessageQueueIF* useThisQueue);
-  virtual ~SimpleActionHelper();
-  void step(ReturnValue_t result = HasReturnvaluesIF::RETURN_OK);
-  void finish(ReturnValue_t result = HasReturnvaluesIF::RETURN_OK);
+  ~SimpleActionHelper() override;
+  void step(ReturnValue_t result = returnvalue::OK);
+  void finish(ReturnValue_t result = returnvalue::OK);
  ReturnValue_t reportData(SerializeIF* data);

 protected:
  void prepareExecution(MessageQueueId_t commandedBy, ActionId_t actionId,
-                        store_address_t dataAddress);
-  virtual void resetHelper();
+                        store_address_t dataAddress) override;
+  void resetHelper() override;

 private:
  bool isExecuting;
@@ -28,4 +28,4 @@ class SimpleActionHelper : public ActionHelper {
  uint8_t stepCount = 0;
 };

-#endif /* SIMPLEACTIONHELPER_H_ */
+#endif /* FSFW_ACTION_SIMPLEACTIONHELPER_H_ */
@@ -0,0 +1,10 @@
+#ifndef FSFW_CFDP_H
+#define FSFW_CFDP_H
+
+#include "cfdp/definitions.h"
+#include "cfdp/handler/FaultHandlerBase.h"
+#include "cfdp/tlv/Lv.h"
+#include "cfdp/tlv/StringLv.h"
+#include "cfdp/tlv/Tlv.h"
+
+#endif  // FSFW_CFDP_H
@@ -1,57 +0,0 @@
-#include "fsfw/cfdp/CFDPHandler.h"
-
-#include "fsfw/cfdp/CFDPMessage.h"
-#include "fsfw/ipc/CommandMessage.h"
-#include "fsfw/ipc/QueueFactory.h"
-#include "fsfw/objectmanager/ObjectManager.h"
-#include "fsfw/storagemanager/storeAddress.h"
-#include "fsfw/tmtcservices/AcceptsTelemetryIF.h"
-
-object_id_t CFDPHandler::packetSource = 0;
-object_id_t CFDPHandler::packetDestination = 0;
-
-CFDPHandler::CFDPHandler(object_id_t setObjectId, CFDPDistributor* dist)
-    : SystemObject(setObjectId) {
-  requestQueue = QueueFactory::instance()->createMessageQueue(CFDP_HANDLER_MAX_RECEPTION);
-  distributor = dist;
-}
-
-CFDPHandler::~CFDPHandler() {}
-
-ReturnValue_t CFDPHandler::initialize() {
-  ReturnValue_t result = SystemObject::initialize();
-  if (result != RETURN_OK) {
-    return result;
-  }
-  this->distributor->registerHandler(this);
-  return HasReturnvaluesIF::RETURN_OK;
-}
-
-ReturnValue_t CFDPHandler::handleRequest(store_address_t storeId) {
-#if FSFW_VERBOSE_LEVEL >= 1
-#if FSFW_CPP_OSTREAM_ENABLED == 1
-  sif::debug << "CFDPHandler::handleRequest" << std::endl;
-#else
-  sif::printDebug("CFDPHandler::handleRequest\n");
-#endif /* !FSFW_CPP_OSTREAM_ENABLED == 1 */
-#endif
-
-  // TODO read out packet from store using storeId
-
-  return RETURN_OK;
-}
-
-ReturnValue_t CFDPHandler::performOperation(uint8_t opCode) {
-  ReturnValue_t status = RETURN_OK;
-  CommandMessage currentMessage;
-  for (status = this->requestQueue->receiveMessage(&currentMessage); status == RETURN_OK;
-       status = this->requestQueue->receiveMessage(&currentMessage)) {
-    store_address_t storeId = CFDPMessage::getStoreId(&currentMessage);
-    this->handleRequest(storeId);
-  }
-  return RETURN_OK;
-}
-
-uint16_t CFDPHandler::getIdentifier() { return 0; }
-
-MessageQueueId_t CFDPHandler::getRequestQueue() { return this->requestQueue->getId(); }
@@ -1,63 +0,0 @@
-#ifndef FSFW_CFDP_CFDPHANDLER_H_
-#define FSFW_CFDP_CFDPHANDLER_H_
-
-#include "fsfw/ipc/MessageQueueIF.h"
-#include "fsfw/objectmanager/SystemObject.h"
-#include "fsfw/returnvalues/HasReturnvaluesIF.h"
-#include "fsfw/tasks/ExecutableObjectIF.h"
-#include "fsfw/tcdistribution/CFDPDistributor.h"
-#include "fsfw/tmtcservices/AcceptsTelecommandsIF.h"
-
-namespace Factory {
-void setStaticFrameworkObjectIds();
-}
-
-class CFDPHandler : public ExecutableObjectIF,
-                    public AcceptsTelecommandsIF,
-                    public SystemObject,
-                    public HasReturnvaluesIF {
-  friend void(Factory::setStaticFrameworkObjectIds)();
-
- public:
-  CFDPHandler(object_id_t setObjectId, CFDPDistributor* distributor);
-  /**
-   * The destructor is empty.
-   */
-  virtual ~CFDPHandler();
-
-  virtual ReturnValue_t handleRequest(store_address_t storeId);
-
-  virtual ReturnValue_t initialize() override;
-  virtual uint16_t getIdentifier() override;
-  MessageQueueId_t getRequestQueue() override;
-  ReturnValue_t performOperation(uint8_t opCode) override;
-
- protected:
-  /**
-   * This is a complete instance of the telecommand reception queue
-   * of the class. It is initialized on construction of the class.
-   */
-  MessageQueueIF* requestQueue = nullptr;
-
-  CFDPDistributor* distributor = nullptr;
-
-  /**
-   * The current CFDP packet to be processed.
-   * It is deleted after handleRequest was executed.
-   */
-  CFDPPacketStored currentPacket;
-
-  static object_id_t packetSource;
-
-  static object_id_t packetDestination;
-
- private:
-  /**
-   * This constant sets the maximum number of packets accepted per call.
-   * Remember that one packet must be completely handled in one
-   * #handleRequest call.
-   */
-  static const uint8_t CFDP_HANDLER_MAX_RECEPTION = 100;
-};
-
-#endif /* FSFW_CFDP_CFDPHANDLER_H_ */
@@ -1,17 +0,0 @@
-#include "CFDPMessage.h"
-
-CFDPMessage::CFDPMessage() {}
-
-CFDPMessage::~CFDPMessage() {}
-
-void CFDPMessage::setCommand(CommandMessage *message, store_address_t cfdpPacket) {
-  message->setParameter(cfdpPacket.raw);
-}
-
-store_address_t CFDPMessage::getStoreId(const CommandMessage *message) {
-  store_address_t storeAddressCFDPPacket;
-  storeAddressCFDPPacket = message->getParameter();
-  return storeAddressCFDPPacket;
-}
-
-void CFDPMessage::clear(CommandMessage *message) {}
@@ -1,7 +1,6 @@
-target_sources(${LIB_FSFW_NAME} PRIVATE
-    CFDPHandler.cpp
-    CFDPMessage.cpp
-)
+target_sources(${LIB_FSFW_NAME} PRIVATE CfdpMessage.cpp CfdpDistributor.cpp
+                                        VarLenFields.cpp helpers.cpp)

 add_subdirectory(pdu)
 add_subdirectory(tlv)
+add_subdirectory(handler)
@@ -0,0 +1,55 @@
+#include "CfdpDistributor.h"
+
+#include "fsfw/tcdistribution/definitions.h"
+
+CfdpDistributor::CfdpDistributor(CfdpDistribCfg cfg)
+    : TcDistributorBase(cfg.objectId, cfg.tcQueue), cfg(cfg) {}
+
+ReturnValue_t CfdpDistributor::registerTcDestination(const cfdp::EntityId& address,
+                                                     AcceptsTelecommandsIF& tcDest) {
+  for (const auto& dest : tcDestinations) {
+    if (dest.id == address) {
+      return returnvalue::FAILED;
+    }
+  }
+  tcDestinations.emplace_back(address, tcDest.getName(), tcDest.getRequestQueue());
+  return returnvalue::OK;
+}
+
+ReturnValue_t CfdpDistributor::selectDestination(MessageQueueId_t& destId) {
+  auto accessorPair = cfg.tcStore.getData(currentMessage.getStorageId());
+  if (accessorPair.first != returnvalue::OK) {
+    return accessorPair.first;
+  }
+  ReturnValue_t result =
+      pduReader.setReadOnlyData(accessorPair.second.data(), accessorPair.second.size());
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  result = pduReader.parseData();
+  if (result != returnvalue::OK) {
+    return result;
+  }
+  cfdp::EntityId foundId;
+  pduReader.getDestId(foundId);
+  bool destFound = false;
+  for (const auto& dest : tcDestinations) {
+    if (dest.id == foundId) {
+      destId = dest.queueId;
+      destFound = true;
+    }
+  }
+  if (not destFound) {
+    // TODO: Warning and event?
+    return tmtcdistrib::NO_DESTINATION_FOUND;
+  }
+  // Packet was forwarded successfully, so do not delete it.
+  accessorPair.second.release();
+  return returnvalue::OK;
+}
+
+const char* CfdpDistributor::getName() const { return "CFDP Distributor"; }
+
+uint32_t CfdpDistributor::getIdentifier() const { return 0; }
+
+MessageQueueId_t CfdpDistributor::getRequestQueue() const { return tcQueue->getId(); }
@@ -0,0 +1,76 @@
+#ifndef FSFW_TCDISTRIBUTION_CFDPDISTRIBUTOR_H_
+#define FSFW_TCDISTRIBUTION_CFDPDISTRIBUTOR_H_
+
+#include <utility>
+#include <vector>
+
+#include "fsfw/cfdp/pdu/PduHeaderReader.h"
+#include "fsfw/returnvalues/returnvalue.h"
+#include "fsfw/tcdistribution/CfdpPacketChecker.h"
+#include "fsfw/tcdistribution/TcDistributorBase.h"
+#include "fsfw/tmtcpacket/cfdp/CfdpPacketStored.h"
+#include "fsfw/tmtcservices/AcceptsTelecommandsIF.h"
+#include "fsfw/tmtcservices/VerificationReporter.h"
+
+struct CfdpDistribCfg {
+  CfdpDistribCfg(object_id_t objectId, StorageManagerIF& tcStore, MessageQueueIF* tcQueue)
+      : objectId(objectId), tcStore(tcStore), tcQueue(tcQueue) {}
+
+  object_id_t objectId;
+  StorageManagerIF& tcStore;
+  MessageQueueIF* tcQueue;
+};
+
+/**
+ * This will be the primary component to perform PDU forwading procedures. This includes forwarding
+ * CFDP TC packets to registered source or destination handlers, and forwarding all telemetry
+ * generated by them to registered TM sinks.
+ * @ingroup tc_distribution
+ */
+class CfdpDistributor : public TcDistributorBase, public AcceptsTelecommandsIF {
+ public:
+  /**
+   * The ctor passes @c set_apid to the checker class and calls the
+   * TcDistribution ctor with a certain object id.
+   * @param setApid The APID of this receiving Application.
+   * @param setObjectId Object ID of the distributor itself
+   * @param setPacketSource Object ID of the source of TC packets.
+   * Must implement CcsdsDistributorIF.
+   */
+  explicit CfdpDistributor(CfdpDistribCfg cfg);
+
+  [[nodiscard]] const char* getName() const override;
+  [[nodiscard]] uint32_t getIdentifier() const override;
+  [[nodiscard]] MessageQueueId_t getRequestQueue() const override;
+
+  /**
+   * Register a new CFDP entity which can receive PDUs.
+   * @param address
+   * @param tcDest
+   * @return
+   *  - @c RETURN_FAILED: Entry already exists for the given address
+   */
+  ReturnValue_t registerTcDestination(const cfdp::EntityId& address, AcceptsTelecommandsIF& tcDest);
+
+ protected:
+  struct EntityInfo {
+    EntityInfo(cfdp::EntityId id, const char* name, MessageQueueId_t queueId)
+        : id(std::move(id)), name(name), queueId(queueId) {}
+    cfdp::EntityId id;
+    const char* name;
+    MessageQueueId_t queueId;
+  };
+  PduHeaderReader pduReader;
+  ReturnValue_t lastTcError = returnvalue::OK;
+  ReturnValue_t lastTmError = returnvalue::OK;
+  // I don't think a regular OBSW will have more than 1 or 2 of these destinations, so I think
+  // it is okay to accept the overhead here
+  std::vector<EntityInfo> tcDestinations;
+  CfdpDistribCfg cfg;
+
+  ReturnValue_t selectDestination(MessageQueueId_t& destId) override;
+
+ private:
+};
+
+#endif /* FSFW_TCDISTRIBUTION_CFDPDISTRIBUTOR_H_ */
@@ -0,0 +1,17 @@
+#include "CfdpMessage.h"
+
+CfdpMessage::CfdpMessage() = default;
+
+CfdpMessage::~CfdpMessage() = default;
+
+void CfdpMessage::setCommand(CommandMessage *message, store_address_t cfdpPacket) {
+  message->setParameter(cfdpPacket.raw);
+}
+
+store_address_t CfdpMessage::getStoreId(const CommandMessage *message) {
+  store_address_t storeId;
+  storeId = static_cast<store_address_t>(message->getParameter());
+  return storeId;
+}
+
+void CfdpMessage::clear(CommandMessage *message) {}
@@ -5,14 +5,14 @@
 #include "fsfw/objectmanager/ObjectManagerIF.h"
 #include "fsfw/storagemanager/StorageManagerIF.h"

-class CFDPMessage {
+class CfdpMessage {
 private:
-  CFDPMessage();
+  CfdpMessage();

 public:
  static const uint8_t MESSAGE_ID = messagetypes::CFDP;

-  virtual ~CFDPMessage();
+  virtual ~CfdpMessage();
  static void setCommand(CommandMessage* message, store_address_t cfdpPacket);

  static store_address_t getStoreId(const CommandMessage* message);
@@ -1,5 +1,7 @@
-#ifndef FSFW_SRC_FSFW_CFDP_FILESIZE_H_
-#define FSFW_SRC_FSFW_CFDP_FILESIZE_H_
+#ifndef FSFW_CFDP_FILESIZE_H_
+#define FSFW_CFDP_FILESIZE_H_
+
+#include <optional>

 #include "fsfw/serialize/SerializeAdapter.h"
 #include "fsfw/serialize/SerializeIF.h"
@@ -8,9 +10,11 @@ namespace cfdp {

 struct FileSize : public SerializeIF {
 public:
-  FileSize() : largeFile(false){};
+  FileSize() = default;

-  FileSize(uint64_t fileSize, bool isLarge = false) { setFileSize(fileSize, isLarge); };
+  explicit FileSize(uint64_t fileSize, bool isLarge = false) { setFileSize(fileSize, isLarge); };
+
+  [[nodiscard]] uint64_t value() const { return fileSize; }

  ReturnValue_t serialize(bool isLarge, uint8_t **buffer, size_t *size, size_t maxSize,
                          Endianness streamEndianness) {
@@ -27,7 +31,7 @@ struct FileSize : public SerializeIF {
    return SerializeAdapter::serialize(&fileSize, buffer, size, maxSize, streamEndianness);
  }

-  size_t getSerializedSize() const override {
+  [[nodiscard]] size_t getSerializedSize() const override {
    if (largeFile) {
      return 8;
    } else {
@@ -43,27 +47,29 @@ struct FileSize : public SerializeIF {
      uint32_t sizeTmp = 0;
      ReturnValue_t result =
          SerializeAdapter::deSerialize(&sizeTmp, buffer, size, streamEndianness);
-      if (result == HasReturnvaluesIF::RETURN_OK) {
+      if (result == returnvalue::OK) {
        fileSize = sizeTmp;
      }
      return result;
    }
  }

-  ReturnValue_t setFileSize(uint64_t fileSize, bool largeFile) {
+  ReturnValue_t setFileSize(uint64_t fileSize_, std::optional<bool> largeFile_) {
+    if (largeFile_) {
+      largeFile = largeFile_.value();
+    }
    if (not largeFile and fileSize > UINT32_MAX) {
      // TODO: emit warning here
-      return HasReturnvaluesIF::RETURN_FAILED;
+      return returnvalue::FAILED;
    }
-    this->fileSize = fileSize;
-    this->largeFile = largeFile;
-    return HasReturnvaluesIF::RETURN_OK;
+    this->fileSize = fileSize_;
+    return returnvalue::OK;
  }

-  bool isLargeFile() const { return largeFile; }
-  uint64_t getSize(bool *largeFile = nullptr) const {
-    if (largeFile != nullptr) {
-      *largeFile = this->largeFile;
+  [[nodiscard]] bool isLargeFile() const { return largeFile; }
+  uint64_t getSize(bool *largeFile_ = nullptr) const {
+    if (largeFile_ != nullptr) {
+      *largeFile_ = this->largeFile;
    }
    return fileSize;
  }
@@ -75,4 +81,4 @@ struct FileSize : public SerializeIF {

 }  // namespace cfdp

-#endif /* FSFW_SRC_FSFW_CFDP_FILESIZE_H_ */
+#endif /* FSFW_CFDP_FILESIZE_H_ */
@@ -1,12 +1,11 @@
-#include "VarLenField.h"
+#include "VarLenFields.h"

-#include "fsfw/FSFW.h"
 #include "fsfw/serialize/SerializeAdapter.h"
 #include "fsfw/serviceinterface.h"

 cfdp::VarLenField::VarLenField(cfdp::WidthInBytes width, size_t value) : VarLenField() {
  ReturnValue_t result = this->setValue(width, value);
-  if (result != HasReturnvaluesIF::RETURN_OK) {
+  if (result != returnvalue::OK) {
 #if FSFW_DISABLE_PRINTOUT == 0
 #if FSFW_CPP_OSTREAM_ENABLED == 1
    sif::warning << "cfdp::VarLenField: Setting value failed" << std::endl;
@@ -21,27 +20,27 @@ cfdp::VarLenField::VarLenField() : width(cfdp::WidthInBytes::ONE_BYTE) { value.o

 cfdp::WidthInBytes cfdp::VarLenField::getWidth() const { return width; }

-ReturnValue_t cfdp::VarLenField::setValue(cfdp::WidthInBytes widthInBytes, size_t value) {
+ReturnValue_t cfdp::VarLenField::setValue(cfdp::WidthInBytes widthInBytes, size_t value_) {
  switch (widthInBytes) {
    case (cfdp::WidthInBytes::ONE_BYTE): {
-      if (value > UINT8_MAX) {
-        return HasReturnvaluesIF::RETURN_FAILED;
+      if (value_ > UINT8_MAX) {
+        return returnvalue::FAILED;
      }
-      this->value.oneByte = value;
+      this->value.oneByte = value_;
      break;
    }
    case (cfdp::WidthInBytes::TWO_BYTES): {
-      if (value > UINT16_MAX) {
-        return HasReturnvaluesIF::RETURN_FAILED;
+      if (value_ > UINT16_MAX) {
+        return returnvalue::FAILED;
      }
-      this->value.twoBytes = value;
+      this->value.twoBytes = value_;
      break;
    }
    case (cfdp::WidthInBytes::FOUR_BYTES): {
-      if (value > UINT32_MAX) {
-        return HasReturnvaluesIF::RETURN_FAILED;
+      if (value_ > UINT32_MAX) {
+        return returnvalue::FAILED;
      }
-      this->value.fourBytes = value;
+      this->value.fourBytes = value_;
      break;
    }
    default: {
@@ -49,7 +48,7 @@ ReturnValue_t cfdp::VarLenField::setValue(cfdp::WidthInBytes widthInBytes, size_
    }
  }
  this->width = widthInBytes;
-  return HasReturnvaluesIF::RETURN_OK;
+  return returnvalue::OK;
 }

 size_t cfdp::VarLenField::getValue() const {
@@ -77,7 +76,7 @@ ReturnValue_t cfdp::VarLenField::serialize(uint8_t **buffer, size_t *size, size_
      **buffer = value.oneByte;
      *size += 1;
      *buffer += 1;
-      return HasReturnvaluesIF::RETURN_OK;
+      return returnvalue::OK;
    }
    case (cfdp::WidthInBytes::TWO_BYTES): {
      return SerializeAdapter::serialize(&value.twoBytes, buffer, size, maxSize, streamEndianness);
@@ -86,16 +85,16 @@ ReturnValue_t cfdp::VarLenField::serialize(uint8_t **buffer, size_t *size, size_
      return SerializeAdapter::serialize(&value.fourBytes, buffer, size, maxSize, streamEndianness);
    }
    default: {
-      return HasReturnvaluesIF::RETURN_FAILED;
+      return returnvalue::FAILED;
    }
  }
 }

 size_t cfdp::VarLenField::getSerializedSize() const { return width; }

-ReturnValue_t cfdp::VarLenField::deSerialize(cfdp::WidthInBytes width, const uint8_t **buffer,
+ReturnValue_t cfdp::VarLenField::deSerialize(cfdp::WidthInBytes width_, const uint8_t **buffer,
                                             size_t *size, Endianness streamEndianness) {
-  this->width = width;
+  this->width = width_;
  return deSerialize(buffer, size, streamEndianness);
 }

@@ -105,7 +104,7 @@ ReturnValue_t cfdp::VarLenField::deSerialize(const uint8_t **buffer, size_t *siz
    case (cfdp::WidthInBytes::ONE_BYTE): {
      value.oneByte = **buffer;
      *size += 1;
-      return HasReturnvaluesIF::RETURN_OK;
+      return returnvalue::OK;
    }
    case (cfdp::WidthInBytes::TWO_BYTES): {
      return SerializeAdapter::deSerialize(&value.twoBytes, buffer, size, streamEndianness);
@@ -114,7 +113,25 @@ ReturnValue_t cfdp::VarLenField::deSerialize(const uint8_t **buffer, size_t *siz
      return SerializeAdapter::deSerialize(&value.fourBytes, buffer, size, streamEndianness);
    }
    default: {
-      return HasReturnvaluesIF::RETURN_FAILED;
+      return returnvalue::FAILED;
    }
  }
 }
+
+bool cfdp::VarLenField::operator<(const cfdp::VarLenField &other) const {
+  if (getWidth() < other.getWidth()) {
+    return true;
+  } else if (getWidth() == other.getWidth()) {
+    return getValue() < other.getValue();
+  } else {
+    return false;
+  }
+}
+
+bool cfdp::VarLenField::operator==(const cfdp::VarLenField &other) const {
+  return getWidth() == other.getWidth() and getValue() == other.getValue();
+}
+
+bool cfdp::VarLenField::operator!=(const cfdp::VarLenField &other) const {
+  return not(*this == other);
+}
@@ -0,0 +1,108 @@
+#ifndef FSFW_CFDP_PDU_VARLENFIELD_H_
+#define FSFW_CFDP_PDU_VARLENFIELD_H_
+
+#include <cstddef>
+#include <cstdint>
+#include <utility>
+
+#include "fsfw/cfdp/definitions.h"
+#include "fsfw/serialize/SerializeIF.h"
+#include "fsfw/serviceinterface.h"
+#include "fsfw/util/UnsignedByteField.h"
+
+namespace cfdp {
+
+class VarLenField : public SerializeIF {
+ public:
+  union LengthFieldLen {
+    uint8_t oneByte;
+    uint16_t twoBytes;
+    uint32_t fourBytes;
+    uint64_t eightBytes;
+  };
+
+  VarLenField();
+  template <typename T>
+  explicit VarLenField(UnsignedByteField<T> byteField);
+
+  VarLenField(cfdp::WidthInBytes width, size_t value);
+
+  bool operator==(const VarLenField &other) const;
+  bool operator!=(const VarLenField &other) const;
+  bool operator<(const VarLenField &other) const;
+
+  ReturnValue_t setValue(cfdp::WidthInBytes, size_t value);
+
+  ReturnValue_t serialize(uint8_t **buffer, size_t *size, size_t maxSize,
+                          Endianness streamEndianness) const override;
+
+  [[nodiscard]] size_t getSerializedSize() const override;
+
+  ReturnValue_t deSerialize(cfdp::WidthInBytes width, const uint8_t **buffer, size_t *size,
+                            Endianness streamEndianness);
+
+  [[nodiscard]] cfdp::WidthInBytes getWidth() const;
+  [[nodiscard]] size_t getValue() const;
+
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+  friend std::ostream &operator<<(std::ostream &os, const VarLenField &id) {
+    os << "dec: " << id.getValue() << ", hex: " << std::hex << std::setw(id.getWidth())
+       << std::setfill('0') << id.getValue() << std::dec << std::setfill('0');
+    return os;
+  }
+#endif
+ private:
+  using SerializeIF::deSerialize;  // we overloaded above, so this is needed to uncofuse the
+                                   // compiler
+  ReturnValue_t deSerialize(const uint8_t **buffer, size_t *size,
+                            Endianness streamEndianness) override;
+
+  cfdp::WidthInBytes width;
+  LengthFieldLen value{};
+};
+
+template <typename T>
+cfdp::VarLenField::VarLenField(UnsignedByteField<T> byteField)
+    : width(static_cast<cfdp::WidthInBytes>(sizeof(T))) {
+  static_assert((sizeof(T) % 2) == 0);
+  setValue(width, byteField.getValue());
+}
+
+struct EntityId : public VarLenField {
+ public:
+  EntityId() : VarLenField() {}
+  template <typename T>
+  explicit EntityId(UnsignedByteField<T> byteField) : VarLenField(byteField) {}
+  EntityId(cfdp::WidthInBytes width, size_t entityId) : VarLenField(width, entityId) {}
+};
+
+struct TransactionSeqNum : public VarLenField {
+ public:
+  TransactionSeqNum() : VarLenField() {}
+  template <typename T>
+  explicit TransactionSeqNum(UnsignedByteField<T> byteField) : VarLenField(byteField) {}
+  TransactionSeqNum(cfdp::WidthInBytes width, size_t seqNum) : VarLenField(width, seqNum) {}
+};
+
+struct TransactionId {
+  TransactionId() = default;
+  TransactionId(EntityId entityId, TransactionSeqNum seqNum)
+      : entityId(std::move(entityId)), seqNum(std::move(seqNum)) {}
+
+  bool operator==(const TransactionId &other) const {
+    return entityId == other.entityId and seqNum == other.seqNum;
+  }
+
+#if FSFW_CPP_OSTREAM_ENABLED == 1
+  friend std::ostream &operator<<(std::ostream &os, const TransactionId &id) {
+    os << "Source ID { " << id.entityId << " }, Sequence Number " << id.seqNum.getValue();
+    return os;
+  }
+#endif
+  EntityId entityId;
+  TransactionSeqNum seqNum;
+};
+
+}  // namespace cfdp
+
+#endif /* FSFW_CFDP_PDU_VARLENFIELD_H_ */
@@ -7,36 +7,37 @@
 #include <cstdint>

 #include "fsfw/returnvalues/FwClassIds.h"
-#include "fsfw/returnvalues/HasReturnvaluesIF.h"
+#include "fsfw/returnvalues/returnvalue.h"

 namespace cfdp {

-static constexpr uint8_t VERSION_BITS = 0b00100000;
+static constexpr char CFDP_VERSION_2_NAME[] = "CCSDS 727.0-B-5";
+
+// Second version of the protocol, only this one is supported here
+static constexpr uint8_t CFDP_VERSION_2 = 0b001;
+static constexpr uint8_t VERSION_BITS = CFDP_VERSION_2 << 5;

 static constexpr uint8_t CFDP_CLASS_ID = CLASS_ID::CFDP;

-static constexpr ReturnValue_t INVALID_TLV_TYPE =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 1);
-static constexpr ReturnValue_t INVALID_DIRECTIVE_FIELDS =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 2);
-static constexpr ReturnValue_t INVALID_PDU_DATAFIELD_LEN =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 3);
+static constexpr ReturnValue_t INVALID_TLV_TYPE = returnvalue::makeCode(CFDP_CLASS_ID, 1);
+static constexpr ReturnValue_t INVALID_DIRECTIVE_FIELD = returnvalue::makeCode(CFDP_CLASS_ID, 2);
+static constexpr ReturnValue_t INVALID_PDU_DATAFIELD_LEN = returnvalue::makeCode(CFDP_CLASS_ID, 3);
 static constexpr ReturnValue_t INVALID_ACK_DIRECTIVE_FIELDS =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 4);
+    returnvalue::makeCode(CFDP_CLASS_ID, 4);
 //! Can not parse options. This can also occur because there are options
 //! available but the user did not pass a valid options array
 static constexpr ReturnValue_t METADATA_CANT_PARSE_OPTIONS =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 5);
-static constexpr ReturnValue_t NAK_CANT_PARSE_OPTIONS =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 6);
+    returnvalue::makeCode(CFDP_CLASS_ID, 5);
+static constexpr ReturnValue_t NAK_CANT_PARSE_OPTIONS = returnvalue::makeCode(CFDP_CLASS_ID, 6);
 static constexpr ReturnValue_t FINISHED_CANT_PARSE_FS_RESPONSES =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 6);
+    returnvalue::makeCode(CFDP_CLASS_ID, 7);
 static constexpr ReturnValue_t FILESTORE_REQUIRES_SECOND_FILE =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 8);
+    returnvalue::makeCode(CFDP_CLASS_ID, 8);
 //! Can not parse filestore response because user did not pass a valid instance
 //! or remaining size is invalid
 static constexpr ReturnValue_t FILESTORE_RESPONSE_CANT_PARSE_FS_MESSAGE =
-    HasReturnvaluesIF::makeReturnCode(CFDP_CLASS_ID, 9);
+    returnvalue::makeCode(CFDP_CLASS_ID, 9);
+static constexpr ReturnValue_t INVALID_PDU_FORMAT = returnvalue::makeCode(CFDP_CLASS_ID, 10);

 //! Checksum types according to the SANA Checksum Types registry
 //! https://sanaregistry.org/r/checksum_identifiers/
@@ -49,17 +50,17 @@ enum ChecksumType {
  NULL_CHECKSUM = 15
 };

-enum PduType : bool { FILE_DIRECTIVE = 0, FILE_DATA = 1 };
+enum PduType : uint8_t { FILE_DIRECTIVE = 0, FILE_DATA = 1 };

-enum TransmissionModes : bool { ACKNOWLEDGED = 0, UNACKNOWLEDGED = 1 };
+enum TransmissionMode : uint8_t { ACKNOWLEDGED = 0, UNACKNOWLEDGED = 1 };

-enum SegmentMetadataFlag : bool { NOT_PRESENT = 0, PRESENT = 1 };
+enum SegmentMetadataFlag : bool { NOT_PRESENT = false, PRESENT = true };

-enum Direction : bool { TOWARDS_RECEIVER = 0, TOWARDS_SENDER = 1 };
+enum Direction : uint8_t { TOWARDS_RECEIVER = 0, TOWARDS_SENDER = 1 };

 enum SegmentationControl : bool {
-  NO_RECORD_BOUNDARIES_PRESERVATION = 0,
-  RECORD_BOUNDARIES_PRESERVATION = 1
+  NO_RECORD_BOUNDARIES_PRESERVATION = false,
+  RECORD_BOUNDARIES_PRESERVATION = true
 };

 enum WidthInBytes : uint8_t {
@@ -69,8 +70,9 @@ enum WidthInBytes : uint8_t {
  FOUR_BYTES = 4,
 };

-enum FileDirectives : uint8_t {
+enum FileDirective : uint8_t {
  INVALID_DIRECTIVE = 0x0f,
+  // The _DIRECTIVE suffix is mandatory here because of some nameclash!
  EOF_DIRECTIVE = 0x04,
  FINISH = 0x05,
  ACK = 0x06,
@@ -97,6 +99,14 @@ enum ConditionCode : uint8_t {
  CANCEL_REQUEST_RECEIVED = 0b1111
 };

+enum FaultHandlerCode {
+  RESERVED = 0b0000,
+  NOTICE_OF_CANCELLATION = 0b0001,
+  NOTICE_OF_SUSPENSION = 0b0010,
+  IGNORE_ERROR = 0b0011,
+  ABANDON_TRANSACTION = 0b0100
+};
+
 enum AckTransactionStatus {
  UNDEFINED = 0b00,
  ACTIVE = 0b01,
@@ -104,18 +114,18 @@ enum AckTransactionStatus {
  UNRECOGNIZED = 0b11
 };

-enum FinishedDeliveryCode { DATA_COMPLETE = 0, DATA_INCOMPLETE = 1 };
+enum FileDeliveryCode { DATA_COMPLETE = 0, DATA_INCOMPLETE = 1 };

-enum FinishedFileStatus {
+enum FileDeliveryStatus {
  DISCARDED_DELIBERATELY = 0,
  DISCARDED_FILESTORE_REJECTION = 1,
  RETAINED_IN_FILESTORE = 2,
  FILE_STATUS_UNREPORTED = 3
 };

-enum PromptResponseRequired : bool { PROMPT_NAK = 0, PROMPT_KEEP_ALIVE = 1 };
+enum PromptResponseRequired : uint8_t { PROMPT_NAK = 0, PROMPT_KEEP_ALIVE = 1 };

-enum TlvTypes : uint8_t {
+enum TlvType : uint8_t {
  FILESTORE_REQUEST = 0x00,
  FILESTORE_RESPONSE = 0x01,
  MSG_TO_USER = 0x02,
@@ -0,0 +1 @@
+target_sources(${LIB_FSFW_NAME} PRIVATE FaultHandlerBase.cpp UserBase.cpp)
@@ -0,0 +1,51 @@
+#include "FaultHandlerBase.h"
+
+namespace cfdp {
+
+FaultHandlerBase::FaultHandlerBase() = default;
+FaultHandlerBase::~FaultHandlerBase() = default;
+
+bool FaultHandlerBase::getFaultHandler(cfdp::ConditionCode code,
+                                       cfdp::FaultHandlerCode& handler) const {
+  auto iter = faultHandlerMap.find(code);
+  if (iter == faultHandlerMap.end()) {
+    return false;
+  }
+  handler = iter->second;
+  return true;
+}
+
+bool FaultHandlerBase::setFaultHandler(cfdp::ConditionCode code, cfdp::FaultHandlerCode handler) {
+  if (not faultHandlerMap.contains(code)) {
+    return false;
+  }
+  if (handler != FaultHandlerCode::NOTICE_OF_SUSPENSION and
+      handler != FaultHandlerCode::ABANDON_TRANSACTION and
+      handler != FaultHandlerCode::NOTICE_OF_CANCELLATION and
+      handler != FaultHandlerCode::IGNORE_ERROR) {
+    return false;
+  }
+  faultHandlerMap[code] = handler;
+  return true;
+}
+
+bool FaultHandlerBase::reportFault(cfdp::TransactionId& id, cfdp::ConditionCode code) {
+  if (not faultHandlerMap.contains(code)) {
+    return false;
+  }
+  cfdp::FaultHandlerCode fh = faultHandlerMap[code];
+  if (fh == cfdp::FaultHandlerCode::IGNORE_ERROR) {
+    ignoreCb(id, code);
+  } else if (fh == cfdp::FaultHandlerCode::ABANDON_TRANSACTION) {
+    abandonCb(id, code);
+  } else if (fh == cfdp::FaultHandlerCode::NOTICE_OF_CANCELLATION) {
+    noticeOfCancellationCb(id, code);
+  } else if (fh == cfdp::FaultHandlerCode::NOTICE_OF_SUSPENSION) {
+    noticeOfSuspensionCb(id, code);
+  } else {
+    // Should never happen, but use defensive programming
+    return false;
+  }
+  return true;
+}
+}  // namespace cfdp
@@ -0,0 +1,77 @@
+#ifndef FSFW_CFDP_FAULTHANDLERBASE_H
+#define FSFW_CFDP_FAULTHANDLERBASE_H
+
+#include <etl/flat_map.h>
+
+#include "fsfw/cfdp/VarLenFields.h"
+#include "fsfw/cfdp/definitions.h"
+
+namespace cfdp {
+
+/**
+ * @brief Provides a way to implement the fault handling procedures as specified
+ * in chapter 4.8 of the CFDP standard.
+ *
+ * @details
+ * It is passed into the CFDP handlers as part of the local entity configuration and provides
+ * a way to specify custom user error handlers.
+ *
+ * It does so by mapping each applicable CFDP condition code to a fault handler which
+ * is denoted by the four @cfdp::FaultHandlerCodes. This code is used to dispatch
+ * to a user-provided callback function:
+ *
+ * 1. @FaultHandlerCodes::IGNORE_ERROR -> @ignore_cb
+ * 2. @FaultHandlerCodes::NOTICE_OF_CANCELLATION` -> @notice_of_cancellation_cb
+ * 3. @FaultHandlerCodes::NOTICE_OF_SUSPENSION` -> @notice_of_suspension_cb
+ * 4. @FaultHandlerCodes::ABANDON_TRANSACTION` -> @abandon_transaction_cb
+ *
+ * For each error reported by @reportError, the appropriate fault handler callback
+ * will be called. The user provides the callbacks by providing a custom class which implements
+ * these base class and all abstract fault handler callbacks.
+ */
+class FaultHandlerBase {
+ public:
+  virtual ~FaultHandlerBase();
+  FaultHandlerBase();
+
+  /**
+   * Get the fault handler code for the given condition code
+   * @param code
+   * @param handler [out] Will be set to the approrpiate handler for the condition code if
+   *    it is valid
+   * @return
+   *  - true if the condition code is valid
+   *  - false otherwise
+   */
+  bool getFaultHandler(cfdp::ConditionCode code, cfdp::FaultHandlerCode& handler) const;
+
+  bool setFaultHandler(cfdp::ConditionCode code, cfdp::FaultHandlerCode handler);
+
+  bool reportFault(cfdp::TransactionId& id, cfdp::ConditionCode code);
+
+  virtual void noticeOfSuspensionCb(cfdp::TransactionId& id, cfdp::ConditionCode code) = 0;
+  virtual void noticeOfCancellationCb(cfdp::TransactionId& id, cfdp::ConditionCode code) = 0;
+  virtual void abandonCb(cfdp::TransactionId& id, cfdp::ConditionCode code) = 0;
+  virtual void ignoreCb(cfdp::TransactionId& id, cfdp::ConditionCode code) = 0;
+
+ private:
+  etl::flat_map<cfdp::ConditionCode, cfdp::FaultHandlerCode, 10> faultHandlerMap = {
+      etl::pair{cfdp::ConditionCode::POSITIVE_ACK_LIMIT_REACHED,
+                cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::KEEP_ALIVE_LIMIT_REACHED,
+                cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::INVALID_TRANSMISSION_MODE,
+                cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::FILE_CHECKSUM_FAILURE, cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::FILE_SIZE_ERROR, cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::NAK_LIMIT_REACHED, cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::INACTIVITY_DETECTED, cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::UNSUPPORTED_CHECKSUM_TYPE,
+                cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::FILESTORE_REJECTION, cfdp::FaultHandlerCode::IGNORE_ERROR},
+      etl::pair{cfdp::ConditionCode::CHECK_LIMIT_REACHED, cfdp::FaultHandlerCode::IGNORE_ERROR}};
+};
+
+}  // namespace cfdp
+
+#endif  // FSFW_CFDP_FAULTHANDLERBASE_H
@@ -0,0 +1,35 @@
+#ifndef FSFW_CFDP_HANDLER_REMOTECONFIGTABLEIF_H
+#define FSFW_CFDP_HANDLER_REMOTECONFIGTABLEIF_H
+
+#include "fsfw/cfdp/handler/mib.h"
+
+namespace cfdp {
+
+class RemoteConfigTableIF {
+ public:
+  virtual ~RemoteConfigTableIF() = default;
+  virtual bool getRemoteCfg(const cfdp::EntityId& remoteId, cfdp::RemoteEntityCfg** cfg) = 0;
+};
+
+/**
+ * Helper class for the common case that there is exactly one remote entity
+ */
+class OneRemoteConfigProvider : public RemoteConfigTableIF {
+ public:
+  explicit OneRemoteConfigProvider(RemoteEntityCfg cfg) : cfg(std::move(cfg)) {}
+
+  bool getRemoteCfg(const EntityId& remoteId, cfdp::RemoteEntityCfg** cfg_) override {
+    if (remoteId != cfg.remoteId) {
+      return false;
+    }
+    *cfg_ = &cfg;
+    return true;
+  }
+
+ private:
+  RemoteEntityCfg cfg;
+};
+
+}  // namespace cfdp
+
+#endif  // FSFW_CFDP_HANDLER_REMOTECONFIGTABLEIF_H
@@ -0,0 +1,12 @@
+#ifndef FSFW_CFDP_HANDLER_STATUSREPORTIF_H
+#define FSFW_CFDP_HANDLER_STATUSREPORTIF_H
+
+namespace cfdp {
+
+class StatusReportIF {
+  virtual ~StatusReportIF() = default;
+};
+
+}  // namespace cfdp
+
+#endif  // FSFW_CFDP_HANDLER_STATUSREPORTIF_H
@@ -0,0 +1,3 @@
+#include "UserBase.h"
+
+cfdp::UserBase::UserBase(HasFileSystemIF& vfs) : vfs(vfs) {}
@@ -0,0 +1,101 @@
+#ifndef FSFW_CFDP_USERBASE_H
+#define FSFW_CFDP_USERBASE_H
+
+#include <optional>
+#include <utility>
+#include <vector>
+
+#include "StatusReportIF.h"
+#include "fsfw/cfdp/VarLenFields.h"
+#include "fsfw/cfdp/tlv/FilestoreResponseTlv.h"
+#include "fsfw/cfdp/tlv/MessageToUserTlv.h"
+#include "fsfw/filesystem/HasFileSystemIF.h"
+
+namespace cfdp {
+
+struct TransactionFinishedParams {
+  TransactionFinishedParams(const TransactionId& id, ConditionCode code, FileDeliveryCode delivCode,
+                            FileDeliveryStatus status)
+      : id(id), condCode(code), status(status), deliveryCode(delivCode) {}
+
+  const TransactionId& id;
+  ConditionCode condCode;
+  FileDeliveryStatus status;
+  FileDeliveryCode deliveryCode;
+  std::vector<FilestoreResponseTlv*> fsResponses;
+  StatusReportIF* statusReport = nullptr;
+};
+
+struct MetadataRecvdParams {
+  MetadataRecvdParams(const TransactionId& id, const EntityId& sourceId)
+      : id(id), sourceId(sourceId) {}
+  const TransactionId& id;
+  const EntityId& sourceId;
+  uint64_t fileSize = 0;
+  const char* sourceFileName = "";
+  const char* destFileName = "";
+  size_t msgsToUserLen = 0;
+  const MessageToUserTlv* msgsToUserArray = nullptr;
+};
+
+struct FileSegmentRecvdParams {
+  TransactionId id;
+  size_t offset;
+  size_t length;
+  std::optional<RecordContinuationState> recContState = std::nullopt;
+  std::pair<const uint8_t*, size_t> segmentMetadata;
+};
+
+/**
+ * @brief Base class which provides a user interface to interact with CFDP handlers.
+ *
+ * @details
+ * This class is also used to pass the Virtual Filestore (VFS) Implementation to the CFDP
+ * handlers so the filestore operations can be mapped to the underlying filestore.
+ *
+ * It is used by implementing it in a child class and then passing it to the CFDP
+ * handler objects. The base class provides default implementation for the user indication
+ * primitives specified in the CFDP standard. The user can override these implementations
+ * to provide custom indication handlers.
+ *
+ * Please note that for all indication callbacks, the passed transaction ID reference will
+ * become invalid shortly after the function has been executed. If the transaction ID is to be
+ * cached or used, create an own copy of it.
+ * @param vfs Virtual Filestore Object. Will be used for all file operations
+ */
+class UserBase {
+  friend class DestHandler;
+
+ public:
+  explicit UserBase(HasFileSystemIF& vfs);
+
+  virtual void transactionIndication(const TransactionId& id) = 0;
+  virtual void eofSentIndication(const TransactionId& id) = 0;
+  virtual void transactionFinishedIndication(const TransactionFinishedParams& params) = 0;
+  /**
+   * Will be called if metadata was received.
+   *
+   * IMPORTANT: The passed struct contains the messages to the user in form of a raw C array.
+   * The TLVs in these arrays are zero-copy types, which means that they point to the raw data
+   * inside the metadata packet directly. The metadata packet will be deleted from the TC store
+   * shortly after it was processed. If some of the data is to be cached and/or used after the
+   * function call, it needs to be copied into another user-provided buffer.
+   * @param params
+   */
+  virtual void metadataRecvdIndication(const MetadataRecvdParams& params) = 0;
+  virtual void fileSegmentRecvdIndication(const FileSegmentRecvdParams& params) = 0;
+  virtual void reportIndication(const TransactionId& id, StatusReportIF& report) = 0;
+  virtual void suspendedIndication(const TransactionId& id, ConditionCode code) = 0;
+  virtual void resumedIndication(const TransactionId& id, size_t progress) = 0;
+  virtual void faultIndication(const TransactionId& id, ConditionCode code, size_t progress) = 0;
+  virtual void abandonedIndication(const TransactionId& id, ConditionCode code,
+                                   size_t progress) = 0;
+  virtual void eofRecvIndication(const TransactionId& id) = 0;
+
+ private:
+  HasFileSystemIF& vfs;
+};
+
+}  // namespace cfdp
+
+#endif  // FSFW_CFDP_USERBASE_H
@@ -0,0 +1,9 @@
+#ifndef FSFW_CFDP_HANDLER_DEFS_H
+#define FSFW_CFDP_HANDLER_DEFS_H
+
+namespace cfdp {
+
+enum class CfdpStates { IDLE, BUSY_CLASS_1_NACKED, BUSY_CLASS_2_ACKED, SUSPENDED };
+
+}
+#endif  // FSFW_CFDP_HANDLER_DEFS_H
@@ -0,0 +1,42 @@
+#ifndef FSFW_CFDP_MIB_H
+#define FSFW_CFDP_MIB_H
+
+#include <utility>
+
+#include "FaultHandlerBase.h"
+#include "fsfw/cfdp/pdu/PduConfig.h"
+
+namespace cfdp {
+
+struct IndicationCfg {
+  bool eofSentIndicRequired = true;
+  bool eofRecvIndicRequired = true;
+  bool fileSegmentRecvIndicRequired = true;
+  bool transactionFinishedIndicRequired = true;
+  bool suspendedIndicRequired = true;
+  bool resumedIndicRequired = true;
+};
+
+struct LocalEntityCfg {
+  LocalEntityCfg(EntityId localId, IndicationCfg indicationCfg, FaultHandlerBase& fhBase)
+      : localId(std::move(localId)), indicCfg(indicationCfg), fhBase(fhBase) {}
+
+  EntityId localId;
+  IndicationCfg indicCfg;
+  FaultHandlerBase& fhBase;
+};
+
+struct RemoteEntityCfg {
+  explicit RemoteEntityCfg(EntityId id) : remoteId(std::move(id)) {}
+  EntityId remoteId;
+  size_t maxFileSegmentLen = 2048;
+  bool closureRequested = false;
+  bool crcOnTransmission = false;
+  TransmissionMode defaultTransmissionMode = TransmissionMode::UNACKNOWLEDGED;
+  ChecksumType defaultChecksum = ChecksumType::NULL_CHECKSUM;
+  const uint8_t version = CFDP_VERSION_2;
+};
+
+}  // namespace cfdp
+
+#endif  // FSFW_CFDP_MIB_H
@@ -0,0 +1,50 @@
+#include "helpers.h"
+
+const char* COND_CODE_STRINGS[14] = {"Unknown",
+                                     "No Error",
+                                     "Positive ACK Limit Reached",
+                                     "Keep Alive Limit Reached",
+                                     "Invalid Transmission Mode",
+                                     "Filestore Rejection",
+                                     "File Checksum Failure",
+                                     "File Size Error",
+                                     "NAK limit reached",
+                                     "Inactivity Detected",
+                                     "Check Limit Reached",
+                                     "Unsupported Checksum Type",
+                                     "Suspend Request Received",
+                                     "Cancel Request Received"};
+
+const char* cfdp::getConditionCodeString(cfdp::ConditionCode code) {
+  switch (code) {
+    case NO_CONDITION_FIELD:
+      return COND_CODE_STRINGS[0];
+    case NO_ERROR:
+      return COND_CODE_STRINGS[1];
+    case POSITIVE_ACK_LIMIT_REACHED:
+      return COND_CODE_STRINGS[2];
+    case KEEP_ALIVE_LIMIT_REACHED:
+      return COND_CODE_STRINGS[3];
+    case INVALID_TRANSMISSION_MODE:
+      return COND_CODE_STRINGS[4];
+    case FILESTORE_REJECTION:
+      return COND_CODE_STRINGS[5];
+    case FILE_CHECKSUM_FAILURE:
+      return COND_CODE_STRINGS[6];
+    case FILE_SIZE_ERROR:
+      return COND_CODE_STRINGS[7];
+    case NAK_LIMIT_REACHED:
+      return COND_CODE_STRINGS[8];
+    case INACTIVITY_DETECTED:
+      return COND_CODE_STRINGS[9];
+    case CHECK_LIMIT_REACHED:
+      return COND_CODE_STRINGS[10];
+    case UNSUPPORTED_CHECKSUM_TYPE:
+      return COND_CODE_STRINGS[11];
+    case SUSPEND_REQUEST_RECEIVED:
+      return COND_CODE_STRINGS[12];
+    case CANCEL_REQUEST_RECEIVED:
+      return COND_CODE_STRINGS[13];
+  }
+  return "Unknown";
+}
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				`target_sources(${LIB_FSFW_NAME} PRIVATE FaultHandlerBase.cpp UserBase.cpp)`